From ae3d3298f3af60387b5e599a38bf51e133e42b88 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Fri, 23 Jun 2017 17:56:07 +0530 Subject: board: engicam: Add icorem6 for i.CoreM6 support Create board/engicam/icorem6 for i.CoreM6 supported files. and update the readme.txt so-that it can list i.CoreM6 board details. Signed-off-by: Jagan Teki Signed-off-by: Thomas Petazzoni --- board/engicam/genimage.cfg | 39 --------------------- board/engicam/icorem6/genimage.cfg | 39 +++++++++++++++++++++ board/engicam/icorem6/readme.txt | 69 ++++++++++++++++++++++++++++++++++++++ board/engicam/readme.txt | 69 -------------------------------------- 4 files changed, 108 insertions(+), 108 deletions(-) delete mode 100644 board/engicam/genimage.cfg create mode 100644 board/engicam/icorem6/genimage.cfg create mode 100644 board/engicam/icorem6/readme.txt delete mode 100644 board/engicam/readme.txt (limited to 'board') diff --git a/board/engicam/genimage.cfg b/board/engicam/genimage.cfg deleted file mode 100644 index f409a08093..0000000000 --- a/board/engicam/genimage.cfg +++ /dev/null @@ -1,39 +0,0 @@ -image boot.vfat { - vfat { - files = { - "uImage", - "imx6dl-icore.dtb", - "imx6q-icore.dtb" - } - } - size = 64M -} - -image sdcard.img { - hdimage { - } - - partition SPL { - in-partition-table = "no" - image = "SPL" - offset = 1024 - } - - partition u-boot-dtb { - in-partition-table = "no" - image = "u-boot-dtb.img" - offset = 69K - } - - partition boot { - partition-type = 0xC - bootable = "true" - image = "boot.vfat" - offset = 8M - } - - partition rootfs { - partition-type = 0x83 - image = "rootfs.ext2" - } -} diff --git a/board/engicam/icorem6/genimage.cfg b/board/engicam/icorem6/genimage.cfg new file mode 100644 index 0000000000..f409a08093 --- /dev/null +++ b/board/engicam/icorem6/genimage.cfg @@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "uImage", + "imx6dl-icore.dtb", + "imx6q-icore.dtb" + } + } + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition SPL { + in-partition-table = "no" + image = "SPL" + offset = 1024 + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot-dtb.img" + offset = 69K + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 8M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext2" + } +} diff --git a/board/engicam/icorem6/readme.txt b/board/engicam/icorem6/readme.txt new file mode 100644 index 0000000000..0ad60bf6e4 --- /dev/null +++ b/board/engicam/icorem6/readme.txt @@ -0,0 +1,69 @@ +********************************************* +Buildroot for Engicam i.CoreM6 SOM platforms: +********************************************* + +This file documents the Buildroot support for Engicam i.CoreM6 +platform boards. + +i.CoreM6 Quad/Dual/DualLite/Solo SOM Starter kits: +https://www.engicam.com/vis-prod/101120 + +This configuration uses U-Boot mainline and kernel mainline. + +Build +===== + +First, configure Buildroot for the Engicam i.CoreM6: + +- for i.CoreM6 Quad/Dual/DualLite/Solo: + + make engicam_imx6qdl_icore_defconfig + +Build all components: + + make + +You will find the following files in output/images/: +- for i.CoreM6 Quad/Dual: + - imx6q-icore.dtb +- for i.CoreM6 DualLite/Solo: + - imx6dl-icore.dtb + - rootfs.ext4 + - rootfs.tar + - sdcard.img + - SPL + - u-boot-dtb.img + - uImage + +Create a bootable SD card +========================= + +To determine the device associated to the SD card have a look in the +/proc/partitions file: + + cat /proc/partitions + +Buildroot prepares a bootable "sdcard.img" image in the output/images/ +directory, ready to be dumped on a SD card. Launch the following +command as root: + + dd if=output/images/sdcard.img of=/dev/ + sync + +*** WARNING! This will destroy all the card content. Use with care! *** + +For details about the medium image layout, see the definition in +board/engicam/icorem6/genimage.cfg + +Boot the i.CoreM6 boards with SD boot: +===================================== + +To boot your newly created system: +- insert the SD card in the SD slot of the board; +- connect 3-wire RS232 serial port J28 on board, and connect with other + serial end or USB cable(if serial-to-usb converter used) using + a terminal emulator at 115200 bps, 8n1; +- close JM3 for sd boot. +- power on the board. + +Enjoy! diff --git a/board/engicam/readme.txt b/board/engicam/readme.txt deleted file mode 100644 index f1010a2308..0000000000 --- a/board/engicam/readme.txt +++ /dev/null @@ -1,69 +0,0 @@ -***************************************** -Buildroot for Engicam i.MX6 SOM platforms: -***************************************** - -This file documents the Buildroot support for all Engicam i.MX6 SOM -platform boards. - -i.CoreM6 Quad/Dual/DualLite/Solo SOM Starter kits: -https://www.engicam.com/vis-prod/101120 - -This configuration uses U-Boot mainline and kernel mainline. - -Build -===== - -First, configure Buildroot for the Engicam i.MX SOM's: - -- for i.CoreM6 Quad/Dual: - - make engicam_imx6qdl_icore_defconfig - -Build all components: - - make - -You will find the following files in output/images/: -- for i.CoreM6 Quad/Dual: - - imx6q-icore.dtb -- for i.CoreM6 DualLite/Solo: - - imx6dl-icore.dtb - - rootfs.ext4 - - rootfs.tar - - sdcard.img - - SPL - - u-boot-dtb.img - - uImage - -Create a bootable SD card -========================= - -To determine the device associated to the SD card have a look in the -/proc/partitions file: - - cat /proc/partitions - -Buildroot prepares a bootable "sdcard.img" image in the output/images/ -directory, ready to be dumped on a SD card. Launch the following -command as root: - - dd if=output/images/sdcard.img of=/dev/ - sync - -*** WARNING! This will destroy all the card content. Use with care! *** - -For details about the medium image layout, see the definition in -board/engicam/genimage.cfg - -Boot the i.CoreM6 boards with SD boot: -===================================== - -To boot your newly created system: -- insert the SD card in the SD slot of the board; -- connect 3-wire RS232 serial port J28 on board, and connect with other - serial end or USB cable(if serial-to-usb converter used) using - a terminal emulator at 115200 bps, 8n1; -- close JM3 for sd boot. -- power on the board. - -Enjoy! -- cgit v1.2.1