diff options
Diffstat (limited to 'board/embest/riotboard/readme.txt')
| -rw-r--r-- | board/embest/riotboard/readme.txt | 46 |
1 files changed, 0 insertions, 46 deletions
diff --git a/board/embest/riotboard/readme.txt b/board/embest/riotboard/readme.txt deleted file mode 100644 index b7390d0d57..0000000000 --- a/board/embest/riotboard/readme.txt +++ /dev/null @@ -1,46 +0,0 @@ -Buildroot for Embest RIoTboard -============================== - -1. Compiling buildroot ----------------------- - -make riotboard_defconfig -make - -2. Installing buildroot ------------------------ - -Prepare an SD-card and plug it into your card reader. Write the bootloader to -your SD-card: - -sudo dd if=output/images/u-boot.imx of=/dev/sdX bs=1k seek=1 - -Create 1 partition on the SD-card using your favourite tool. The -partition should be big enough to hold your rootfs, for example -128MiB. Here's an example partition layout: - - Device Boot Start End Blocks Id System -/dev/sdX1 2048 264191 131072 83 Linux - -Format the SD-card partition with your favourite filesystem: - -sudo mkfs.ext2 /dev/sdX1 - -Deploy your rootfs to the SD-card: - -sudo mkdir /mnt/sdcard/ -sudo mount /dev/sdX1 /mnt/sdcard/ -sudo tar xf output/images/rootfs.tar -C /mnt/sdcard/ -sudo umount /dev/sdX1 - -3. Running buildroot --------------------- - -Position the board so you can read the label "RIoTboard" on the right side of -SW1 DIP switches. Configure the SW1 swiches like this: - -10100101 (1 means ON position, 0 means OFF position) - -Now plug your prepared SD-card in slot J6. Connect a serial console (115200, 8, -N, 1) to header J18. Connect a 5V/1A power supply to the board and enjoy your -new toy. |
