3 files changed, 0 insertions, 81 deletions
diff --git a/board/ci40/genimage.cfg b/board/ci40/genimage.cfg
deleted file mode 100644
index 0ffc91ce87..0000000000
--- a/board/ci40/genimage.cfg
+++ /dev/null
@@ -1,12 +0,0 @@
-# Minimal SD card image
-#
-
-image sdcard.img {
-  hdimage {
-  }
-
-  partition rootfs {
-    partition-type = 0x83
-    image = "rootfs.ext4"
-  }
-}
diff --git a/board/ci40/post-build.sh b/board/ci40/post-build.sh
deleted file mode 100755
index 9af74c7a7e..0000000000
--- a/board/ci40/post-build.sh
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh
-
-# Copy to target
-cp ${BINARIES_DIR}/vmlinux.gz.itb ${TARGET_DIR}/fitImage
diff --git a/board/ci40/readme.txt b/board/ci40/readme.txt
deleted file mode 100644
index ba1eb93883..0000000000
--- a/board/ci40/readme.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-*********************
-* MIPS Creator CI40 *
-*********************
-
-This document details how to build and run a Buildroot system on the
-MIPS Creator CI40 platform. For more details about the CI40, see
-https://creatordev.io/ci40-iot-hub.html.
-
-How to build
-------------
-
-$ make ci40_defconfig
-$ make
-
-Prepare USB/MMC for boot
-------------------------
-
-On successful build, "sdcard.img" file will be created in 'output/images'
-folder.
-
-Use following command to write image to bootable device
-
-$ sudo dd if=./output/images/sdcard.img of=/dev/<your-microsd-or-usb-device>
-
-Booting from USB/MMC
---------------------
-
-The boot loader is already present in NOR flash. To boot your newly generated
-Linux and root filesystem, you need to interrupt U-Boot autoboot. Current
-U-Boot is configured with 2 seconds of boot-delay, after expiry of this
-boot-delay timeout U-Boot starts booting the default image. To interrupt
-autoboot, press any key before the boot-delay time expires, U-Boot will
-stop the autoboot process and give a U-Boot prompt. You can now boot to
-your preferred boot method as describe below:
-
-From USB
-  pistachio # run usbboot
-
-From SD-Card
-  pistachio # run mmcboot
-
-Persistent boot command
------------------------
-
-To boot automatically to your preferred boot method, use following command to
-make it persistent, for example to automatically boot to usb:
-
-  pistachio # setenv bootcmd run usbboot
-  pistachio # saveenv
-
-Flash new bootloader
---------------------
-
-The bootloader image will be available in the 'output/images' folder. To flash
-the new bootloader, copy it to the device and use the following command on the
-device:
-
-# flashcp -v u-boot-pistachio_marduk-<version>.img /dev/mtd0
-
-Online docs
------------
-
-Mostly for OpenWRT but it is applicable to Buildroot
-https://docs.creatordev.io/ci40/guides/openwrt-platform/#overview
-