docs: Move README file to root

Move the README file from the subdirectory doc to the root.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

1 files changed, 0 insertions, 59 deletions

diff --git a/docs/README b/docs/README
deleted file mode 100644
index 944347dd61..0000000000
--- a/docs/README
+++ /dev/null
@@ -1,59 +0,0 @@
-To build and use the buildroot stuff, do the following:
-
-1) run 'make menuconfig'
-2) select the packages you wish to compile
-3) run 'make'
-4) wait while it compiles
-5) Use your shiny new root filesystem. Depending on which sort of
-    root filesystem you selected, you may want to loop mount it,
-    chroot into it, nfs mount it on your target device, burn it
-    to flash, or whatever is appropriate for your target system.
-
-You do not need to be root to build or run buildroot.  Have fun!
-
-Offline build:
-==============
-
-In order to do an offline-build (not connected to the net), fetch all
-selected source by issuing a
-$ make source
-
-before you disconnect.
-If your build-host is never connected, then you have to copy buildroot
-and your toplevel .config to a machine that has an internet-connection
-and issue "make source" there, then copy the content of your dl/ dir to
-the build-host.
-
-Building out-of-tree:
-=====================
-
-Buildroot supports building out of tree with a syntax similar
-to the Linux kernel. To use it, add O=<directory> to the
-make command line, E.G.:
-
-$ make O=/tmp/build
-
-And all the output files (including .config) will be located under /tmp/build.
-
-More finegrained configuration:
-===============================
-
-You can specify a config-file for uClibc:
-$ make UCLIBC_CONFIG_FILE=/my/uClibc.config
-
-And you can specify a config-file for busybox:
-$ make BUSYBOX_CONFIG_FILE=/my/busybox.config
-
-To use a non-standard host-compiler (if you do not have 'gcc'),
-make sure that the compiler is in your PATH and that the library paths are
-setup properly, if your compiler is built dynamically:
-$ make HOSTCC=gcc-4.3.orig HOSTCXX=gcc-4.3-mine
-
-Depending on your configuration, there are some targets you can use to
-use menuconfig of certain packages. This includes:
-$ make HOSTCC=gcc-4.3 linux-menuconfig
-$ make HOSTCC=gcc-4.3 uclibc-menuconfig
-$ make HOSTCC=gcc-4.3 busybox-menuconfig
-
-Please feed suggestions, bug reports, insults, and bribes back to the
-buildroot mailing list: buildroot@buildroot.org