buildroot/board, branch 2017.02

board/atmel/readme.txt: fix typos

2017-02-24T10:58:30+00:00

Signed-off-by: Luca Ceresoli Signed-off-by: Thomas Petazzoni

board/udoo/neo: specify an offset for the rootfs partition

2017-02-15T20:28:48+00:00

When manually writing SPL and u-boot.img to the SD card the rootfs gets corrupted. Fix this issue by passing a 1MB offset for the rootfs. Reported-by: Breno Lima Signed-off-by: Fabio Estevam Tested-by: Breno Lima Signed-off-by: Thomas Petazzoni

configs/odroidc2: update boot.ini to 5ce6bcc6d8048ba5ff351516b751d52f5cda6981

2017-02-06T13:03:55+00:00

changes: - add multicam support - add the new options - organization and add uhs and card remove controls - clarify hdmi/dvi/vga selection Signed-off-by: Dagg Stompler Signed-off-by: Thomas Petazzoni

configs: Update Synopsys VDK for ARC HS38

2017-02-04T09:23:22+00:00

This updates Linux kernel for Synopsys ARC HS38 VDK so it matches real platform and while at it bump kernel version to the latest. Main changes: * Linux kernel v4.9.6 (latest in 4.9.x series in buildroot) * Add support of MMC controller which is used for rootfs * Add support of UIO which is used to communicate with EVSS Now with this update image built by vanilla Buildroot VDK has working UART, MMC, LCD, Ethernet, UIO etc. And while at it we rename defconfing so it: 1) Doesn't mention SMP any more - that's the only option anyways now 2) Matches common naming scheme: vendor_arch_platform Signed-off-by: Alexey Brodkin Cc: Zakharov Vlad Cc: Peter Korsgaard Cc: Thomas Petazzoni Signed-off-by: Peter Korsgaard

configs/qemu: bump to the latest kernel version

2017-01-31T13:25:24+00:00

Also bump the pc samples since they're tied to the (base) qemu config. Results table: Defconfig Kernel Qemu Network Status -------------------------------------------------------------- aarch64_virt 4.9.6 2.6.0 YES OK (3) arm_versatile 4.9.6 2.5.0 YES OK arm_versatile_nommu 4.4.45 2.5.0 YES OK arm_vexpress 4.9.6 2.5.0 YES OK m68k_mcf5208 4.8.17 2.5.0 YES OK (6) m68k_q800 4.9.6 q800-v2.4.0 NO (2) OK microblazebe 4.9.6 2.5.0 YES OK microblazeel 4.9.6 2.5.0 YES OK mips32r2el_malta 4.9.6 2.5.0 YES OK mips32r2_malta 4.9.6 2.5.0 YES OK mips32r6el_malta 4.9.6 2.6.0 YES OK (3) mips32r6_malta 4.9.6 2.6.0 YES OK (3) mips64el_malta 4.9.6 2.5.0 YES OK mips64_malta 4.8.17 2.5.0 YES OK (6) mips64r6el_malta 4.9.6 2.7.0 YES OK (3)(4) mips64r6_malta 4.9.6 2.7.0 YES OK (3)(4) nios2-10m50 4.9.6 2.9.0 NO OK or1k 4.9.6 2.5.0 NO OK ppc_g3beige 4.9.6 2.5.0 YES OK ppc_mpc8544ds 4.9.6 2.5.0 YES OK ppc_virtex_ml507 4.9.6 2.5.0 NO OK ppc64_pseries 4.9.6 2.5.0 YES OK sh4 4.9.6 2.5.0 YES OK sh4eb 4.9.6 2.5.0 NO (1) OK sparc_ss10 4.9.6 2.5.0 YES OK sparc64_sun4u 4.9.6 2.5.0 YES OK sparc_sun4u 4.9.6 2.5.0 YES OK x86 4.9.6 2.5.0 YES OK x86_64 4.9.6 2.5.0 YES OK xtensa_lx60 4.8.17 2.6.0 YES OK (6) xtensa_lx60_nommu 4.8.17 2.6.0 YES OK (5) (1) - Probably an endian issue with 8139 emulation/driver (2) - There's a network interface, but enabling it in qemu fails (3) - Known to fail with qemu versions lower than 2.6.0 (4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0 (5) - Kept back on 4.8.x series since 4.9.x fails to build (6) - Kept back on 4.8.x series since 4.9.x fails to boot Signed-off-by: Gustavo Zacarias Signed-off-by: Peter Korsgaard

configs/imx6q-sabresd: Add new defconfig

2017-01-31T09:21:28+00:00

Add imx6q-sabresd_defconfig which supports imx6q-sabresd board using mainline U-Boot and mainline kernel. Keep freescale_imx6qsabresd_defconfig for those who want to run U-Boot and kernel versions from NXP. Signed-off-by: Fabio Estevam Signed-off-by: Peter Korsgaard

board: add support for chiliBoard

2017-01-30T20:24:43+00:00

Board support package includes: * Buildroot defconfig * Mainline Linux kernel v4.9.6 * Mainline U-Boot (current HEAD revision is used, as board support patches are not in stable release yet) * genimage config to create sdcard image * Board readme.txt [Peter: use http:// instead of git:// for u-boot] Signed-off-by: Marcin Niestroj Signed-off-by: Peter Korsgaard

configs/qemu: enable tmpfs for or1k

2017-01-27T13:17:11+00:00

This is used by buildroot default initscripts and results in some ugly errors on startup otherwise. Signed-off-by: Gustavo Zacarias Signed-off-by: Peter Korsgaard

board: raspberrypi: mention the Zero model in readme.txt

2017-01-26T21:43:34+00:00

Cc: "Yann E. MORIN" Cc: Peter Seiderer Signed-off-by: Baruch Siach Acked-by: "Yann E. MORIN" Signed-off-by: Peter Korsgaard

board: raspberrypi: don't generate a marked kernel

2017-01-26T21:35:15+00:00

We no longer use the marked kernel. Cc: Peter Seiderer Signed-off-by: Baruch Siach Reviewed-by: "Yann E. MORIN" Signed-off-by: Peter Korsgaard