buildroot/board/raspberrypi, branch 2017.11

raspberrypi: post-image.sh fix gpu_mem option

2017-10-21T19:37:10+00:00

The gpu_mem option is not using the proper option argument which causes sed to fail. + case "${arg}" in + gpu_mem=ome/gportay/output-rpi3-qtwe/images + sed -e '/^ome/gportay/output-rpi3-qtwe/images=/s,=.*,=ome/gportay/output-rpi3-qtwe/images,' -i /home/gportay/output-rpi3-qtwe/images/rpi-firmware/config.txt sed: -e expression #1, char 8: extra characters after command + case "${arg}" in + gpu_mem=ome/gportay/output-rpi3-qtwe/images + sed -e '/^ome/gportay/output-rpi3-qtwe/images=/s,=.*,=ome/gportay/output-rpi3-qtwe/images,' -i /home/gportay/output-rpi3-qtwe/images/rpi-firmware/config.txt sed: -e expression #1, char 8: extra characters after command The issue comes from the use of $1 instead of $arg to extract the gpu_mem value. $1 is the $(BINARIES_DIR) which leads to a sed expression error. Also, it adds the error flag to the shell script to prevent from such situation and terminate the build in error. Signed-off-by: Gaël PORTAY Acked-by: "Yann E. MORIN" Signed-off-by: Thomas Petazzoni

raspberrypi: post-image.sh add new gpu_mem option

2017-09-27T20:08:03+00:00

The amount of GPU memory can be set using the new option --gpu_mem_XXX (where XXX is the total amount of memory available on the board). Signed-off-by: Gaël PORTAY Signed-off-by: Arnout Vandecappelle (Essensium/Mind)

board/raspberrypi/post-image.sh: add multi arg support

2017-09-27T20:08:03+00:00

Add possibility to supply multiple arguments to post-image.sh Signed-off-by: Erik Stromdahl [Arnout: indent esac, suggested by Gaël PORTAY] Signed-off-by: Arnout Vandecappelle (Essensium/Mind)

configs: add raspberrypi3 64bits defconfig

2017-05-04T07:25:20+00:00

This configuration builds a 64bit image for RaspberryPi 3. The size of the ext4 filesystem has to be extended to fit the large amount (~60MB) of kernel modules enabled in the defconfig. [Peter: drop gcc version selection / glibc, explain ext4 size requirement] Signed-off-by: Gaël PORTAY Tested-by: Ricardo Martincoski Signed-off-by: Peter Korsgaard

configs/raspberrypi3_defconfig: add raspberry pi 3 compute module support

2017-03-05T20:25:51+00:00

Signed-off-by: Martin Bark Signed-off-by: Thomas Petazzoni

configs/raspberrypi0_defconfig: add raspberry pi zero w support

2017-03-05T20:25:51+00:00

Signed-off-by: Martin Bark Signed-off-by: Thomas Petazzoni

board: raspberrypi: mention the Zero model in readme.txt

2017-01-26T21:43:34+00:00

Cc: "Yann E. MORIN" Cc: Peter Seiderer Signed-off-by: Baruch Siach Acked-by: "Yann E. MORIN" Signed-off-by: Peter Korsgaard

board: raspberrypi: don't generate a marked kernel

2017-01-26T21:35:15+00:00

We no longer use the marked kernel. Cc: Peter Seiderer Signed-off-by: Baruch Siach Reviewed-by: "Yann E. MORIN" Signed-off-by: Peter Korsgaard

board: raspberrypi: use regular kernel image

2017-01-26T21:35:05+00:00

Since release 4.4 a kernel without a trailer is assumed to be device tree capable. Since our Raspberry Pi defconfigs all use the newer firmware we can just use the regular kernel image. https://www.raspberrypi.org/documentation/configuration/device-tree.md Tested on Raspberry Pi 3. Cc: Peter Seiderer Signed-off-by: Baruch Siach Reviewed-by: "Yann E. MORIN" Signed-off-by: Peter Korsgaard

raspberrypi3: fix serial console (load pi3-miniuart-bt overlay)

2016-09-18T17:21:18+00:00

- enable BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS in raspberrypi3_defconfig - add copy of rpi-firmware/overlays directory to boot partition in genimage-raspberrypi3.cfg - enhance post-image.sh script to add 'dtoverlay=pi3-miniuart-bt' on request - add BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay" in raspberrypi3_defconfig Signed-off-by: Peter Seiderer Signed-off-by: Thomas Petazzoni