buildroot/board/amarula, branch 2019.02-op-build

configs/amarula_a64_relic: add WiFi support

2018-11-01T13:21:32+00:00

Amarula A64-Relic board has AP6330 WiFi/BT combo, but does not have ethernet port. So it makes sense to enable wireless networking by default: - add broadcom wireless firmware package to image - add basic wireless tools to image - add rootfs overlay with proper NVRAM file for on-board AP6330 chip - add mdev to image to enable module autoloading - update readme.txt to test wifi Signed-off-by: Jagan Teki Signed-off-by: Thomas Petazzoni

configs/amarula_a64_relic: new defconfig

2018-11-01T13:21:32+00:00

Add initial support for Amarula A64-Relic board with below features: - U-Boot 2018.07 - Linux 4.17.0-rc6 - Default packages from buildroot Signed-off-by: Jagan Teki [Thomas: add missing BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y and BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y options.] Signed-off-by: Thomas Petazzoni

board: amarula: vyasa: Give raw space for falcon mode

2018-05-27T20:05:35+00:00

RK3288 Vyasa board support falcon mode in U-Boot and SD layout start from 16MB offset for args and 17MB for uImage. So give full u-boot partition space as 30M so-that it can occupy bigger uImage file and doesn't overlap rootfs partition. [Peter: use # as comment character, clarify comment wording] Reported-by: Shyam Saini Tested-by: Shyam Saini Signed-off-by: Jagan Teki Signed-off-by: Shyam saini Signed-off-by: Peter Korsgaard

board: Add Vyasa RK3288 board support

2018-02-06T10:39:48+00:00

Add Vyasa board, from rk3288 family SOC. Signed-off-by: Jagan Teki Signed-off-by: Peter Korsgaard