From 60f9d69e016b11c468c98ea75ba0a60c44afbbc4 Mon Sep 17 00:00:00 2001 From: Patrick Williams Date: Wed, 17 Aug 2016 14:31:25 -0500 Subject: yocto-poky: Move to import-layers subdir We are going to import additional layers, so create a subdir to hold all of the layers that we import with git-subtree. Change-Id: I6f732153a22be8ca663035c518837e3cc5ec0799 Signed-off-by: Patrick Williams --- yocto-poky/meta-yocto-bsp/conf/layer.conf | 11 --- .../meta-yocto-bsp/conf/machine/beaglebone.conf | 39 --------- .../meta-yocto-bsp/conf/machine/edgerouter.conf | 22 ----- .../meta-yocto-bsp/conf/machine/genericx86-64.conf | 8 -- .../meta-yocto-bsp/conf/machine/genericx86.conf | 10 --- .../conf/machine/include/genericx86-common.inc | 20 ----- .../meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf | 33 -------- .../lib/oeqa/controllers/__init__.py | 0 .../lib/oeqa/controllers/beaglebonetarget.py | 98 ---------------------- .../lib/oeqa/controllers/edgeroutertarget.py | 90 -------------------- .../lib/oeqa/controllers/grubtarget.py | 71 ---------------- .../meta-yocto-bsp/lib/oeqa/selftest/__init__.py | 0 .../meta-yocto-bsp/lib/oeqa/selftest/gummiboot.py | 83 ------------------ yocto-poky/meta-yocto-bsp/lib/oeqa/yoctobsp.py | 39 --------- .../formfactor/formfactor/beaglebone/machconfig | 3 - .../formfactor/formfactor/genericx86-64/machconfig | 6 -- .../formfactor/formfactor/genericx86/machconfig | 6 -- .../recipes-bsp/formfactor/formfactor_0.0.bbappend | 1 - .../gma500-gfx-check/gma500-gfx-check.conf | 2 - .../gma500-gfx-check/gma500-gfx-check.sh | 15 ---- .../gma500-gfx-check/gma500-gfx-check_1.0.bb | 18 ---- .../packagegroup-core-tools-profile.bbappend | 2 - .../uclibc/uclibc/genericx86-64/uClibc.machine | 69 --------------- .../uclibc/uclibc/genericx86/uClibc.machine | 69 --------------- .../recipes-core/uclibc/uclibc_git.bbappend | 1 - .../xserver-xf86-config/genericx86-64/xorg.conf | 0 .../xserver-xf86-config/genericx86/xorg.conf | 0 .../xorg-xserver/xserver-xf86-config_0.1.bbappend | 1 - .../recipes-kernel/linux/linux-yocto_4.1.bbappend | 23 ----- .../recipes-kernel/linux/linux-yocto_4.4.bbappend | 23 ----- 30 files changed, 763 deletions(-) delete mode 100644 yocto-poky/meta-yocto-bsp/conf/layer.conf delete mode 100644 yocto-poky/meta-yocto-bsp/conf/machine/beaglebone.conf delete mode 100644 yocto-poky/meta-yocto-bsp/conf/machine/edgerouter.conf delete mode 100644 yocto-poky/meta-yocto-bsp/conf/machine/genericx86-64.conf delete mode 100644 yocto-poky/meta-yocto-bsp/conf/machine/genericx86.conf delete mode 100644 yocto-poky/meta-yocto-bsp/conf/machine/include/genericx86-common.inc delete mode 100644 yocto-poky/meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf delete mode 100644 yocto-poky/meta-yocto-bsp/lib/oeqa/controllers/__init__.py delete mode 100644 yocto-poky/meta-yocto-bsp/lib/oeqa/controllers/beaglebonetarget.py delete mode 100644 yocto-poky/meta-yocto-bsp/lib/oeqa/controllers/edgeroutertarget.py delete mode 100644 yocto-poky/meta-yocto-bsp/lib/oeqa/controllers/grubtarget.py delete mode 100644 yocto-poky/meta-yocto-bsp/lib/oeqa/selftest/__init__.py delete mode 100644 yocto-poky/meta-yocto-bsp/lib/oeqa/selftest/gummiboot.py delete mode 100644 yocto-poky/meta-yocto-bsp/lib/oeqa/yoctobsp.py delete mode 100644 yocto-poky/meta-yocto-bsp/recipes-bsp/formfactor/formfactor/beaglebone/machconfig delete mode 100644 yocto-poky/meta-yocto-bsp/recipes-bsp/formfactor/formfactor/genericx86-64/machconfig delete mode 100644 yocto-poky/meta-yocto-bsp/recipes-bsp/formfactor/formfactor/genericx86/machconfig delete mode 100644 yocto-poky/meta-yocto-bsp/recipes-bsp/formfactor/formfactor_0.0.bbappend delete mode 100644 yocto-poky/meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx-check/gma500-gfx-check.conf delete mode 100644 yocto-poky/meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx-check/gma500-gfx-check.sh delete mode 100644 yocto-poky/meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx-check_1.0.bb delete mode 100644 yocto-poky/meta-yocto-bsp/recipes-core/packagegroups/packagegroup-core-tools-profile.bbappend delete mode 100644 yocto-poky/meta-yocto-bsp/recipes-core/uclibc/uclibc/genericx86-64/uClibc.machine delete mode 100644 yocto-poky/meta-yocto-bsp/recipes-core/uclibc/uclibc/genericx86/uClibc.machine delete mode 100644 yocto-poky/meta-yocto-bsp/recipes-core/uclibc/uclibc_git.bbappend delete mode 100644 yocto-poky/meta-yocto-bsp/recipes-graphics/xorg-xserver/xserver-xf86-config/genericx86-64/xorg.conf delete mode 100644 yocto-poky/meta-yocto-bsp/recipes-graphics/xorg-xserver/xserver-xf86-config/genericx86/xorg.conf delete mode 100644 yocto-poky/meta-yocto-bsp/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend delete mode 100644 yocto-poky/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_4.1.bbappend delete mode 100644 yocto-poky/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_4.4.bbappend (limited to 'yocto-poky/meta-yocto-bsp') diff --git a/yocto-poky/meta-yocto-bsp/conf/layer.conf b/yocto-poky/meta-yocto-bsp/conf/layer.conf deleted file mode 100644 index 44dbca60f..000000000 --- a/yocto-poky/meta-yocto-bsp/conf/layer.conf +++ /dev/null @@ -1,11 +0,0 @@ -# We have a conf and classes directory, add to BBPATH -BBPATH .= ":${LAYERDIR}" - -# We have recipes-* directories, add to BBFILES -BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \ - ${LAYERDIR}/recipes-*/*/*.bbappend" - -BBFILE_COLLECTIONS += "yoctobsp" -BBFILE_PATTERN_yoctobsp = "^${LAYERDIR}/" -BBFILE_PRIORITY_yoctobsp = "5" -LAYERVERSION_yoctobsp = "3" diff --git a/yocto-poky/meta-yocto-bsp/conf/machine/beaglebone.conf b/yocto-poky/meta-yocto-bsp/conf/machine/beaglebone.conf deleted file mode 100644 index 179d135a5..000000000 --- a/yocto-poky/meta-yocto-bsp/conf/machine/beaglebone.conf +++ /dev/null @@ -1,39 +0,0 @@ -#@TYPE: Machine -#@NAME: Beaglebone machine -#@DESCRIPTION: Machine configuration for http://beagleboard.org/bone and http://beagleboard.org/black boards - -PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -XSERVER ?= "xserver-xorg \ - xf86-input-evdev \ - xf86-input-mouse \ - xf86-video-fbdev \ - xf86-input-keyboard" - -MACHINE_EXTRA_RRECOMMENDS = " kernel-modules kernel-devicetree" - -EXTRA_IMAGEDEPENDS += "u-boot" - -DEFAULTTUNE ?= "cortexa8hf-neon" -include conf/machine/include/tune-cortexa8.inc - -IMAGE_FSTYPES += "tar.bz2 jffs2" -EXTRA_IMAGECMD_jffs2 = "-lnp " - -SERIAL_CONSOLE = "115200 ttyO0" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" -PREFERRED_VERSION_linux-yocto ?= "4.4%" - -KERNEL_IMAGETYPE = "zImage" -KERNEL_DEVICETREE = "am335x-bone.dtb am335x-boneblack.dtb" -KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}" - -SPL_BINARY = "MLO" -UBOOT_SUFFIX = "img" -UBOOT_MACHINE = "am335x_evm_config" -UBOOT_ENTRYPOINT = "0x80008000" -UBOOT_LOADADDRESS = "0x80008000" - -MACHINE_FEATURES = "usbgadget usbhost vfat alsa" - -IMAGE_BOOT_FILES ?= "u-boot.${UBOOT_SUFFIX} MLO" diff --git a/yocto-poky/meta-yocto-bsp/conf/machine/edgerouter.conf b/yocto-poky/meta-yocto-bsp/conf/machine/edgerouter.conf deleted file mode 100644 index 6343dfc38..000000000 --- a/yocto-poky/meta-yocto-bsp/conf/machine/edgerouter.conf +++ /dev/null @@ -1,22 +0,0 @@ -#@TYPE: Machine -#@NAME: Edgerouter -#@DESCRIPTION: Edgerouter - -require conf/machine/include/tune-mips64.inc - -MACHINE_FEATURES = "pci ext2 ext3 serial" - -KERNEL_IMAGETYPE = "vmlinux" -KERNEL_ALT_IMAGETYPE = "vmlinux.bin" -KERNEL_IMAGE_STRIP_EXTRA_SECTIONS = ".comment" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" -PREFERRED_VERSION_linux-yocto ?= "4.4%" - -SERIAL_CONSOLE = "115200 ttyS0" -USE_VT ?= "0" - -MACHINE_EXTRA_RRECOMMENDS = " kernel-modules" - -IMAGE_FSTYPES ?= "jffs2 tar.bz2" -JFFS2_ERASEBLOCK = "0x10000" diff --git a/yocto-poky/meta-yocto-bsp/conf/machine/genericx86-64.conf b/yocto-poky/meta-yocto-bsp/conf/machine/genericx86-64.conf deleted file mode 100644 index f76e35af6..000000000 --- a/yocto-poky/meta-yocto-bsp/conf/machine/genericx86-64.conf +++ /dev/null @@ -1,8 +0,0 @@ -#@TYPE: Machine -#@NAME: Generic X86_64. - -#@DESCRIPTION: Machine configuration for generic X86_64 (64-bit) PCs and servers. Supports a moderately wide range of drivers that should boot and be usable on "typical" hardware. - -DEFAULTTUNE ?= "core2-64" -require conf/machine/include/tune-core2.inc -require conf/machine/include/genericx86-common.inc diff --git a/yocto-poky/meta-yocto-bsp/conf/machine/genericx86.conf b/yocto-poky/meta-yocto-bsp/conf/machine/genericx86.conf deleted file mode 100644 index 798b62ec2..000000000 --- a/yocto-poky/meta-yocto-bsp/conf/machine/genericx86.conf +++ /dev/null @@ -1,10 +0,0 @@ -#@TYPE: Machine -#@NAME: Generic X86. - -#@DESCRIPTION: Machine configuration for generic X86 (32-bit) PCs. Supports a moderately wide range of drivers that should boot and be usable on "typical" hardware. - -DEFAULTTUNE ?= "core2-32" -require conf/machine/include/tune-core2.inc -require conf/machine/include/genericx86-common.inc - -MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "gma500-gfx-check" diff --git a/yocto-poky/meta-yocto-bsp/conf/machine/include/genericx86-common.inc b/yocto-poky/meta-yocto-bsp/conf/machine/include/genericx86-common.inc deleted file mode 100644 index 16b689de0..000000000 --- a/yocto-poky/meta-yocto-bsp/conf/machine/include/genericx86-common.inc +++ /dev/null @@ -1,20 +0,0 @@ -include conf/machine/include/x86-base.inc -MACHINE_FEATURES += "wifi efi pcbios" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" -PREFERRED_VERSION_linux-yocto ?= "4.4%" -PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -XSERVER ?= "${XSERVER_X86_BASE} \ - ${XSERVER_X86_EXT} \ - ${XSERVER_X86_I915} \ - ${XSERVER_X86_I965} \ - ${XSERVER_X86_FBDEV} \ - ${XSERVER_X86_VESA} \ - ${XSERVER_X86_MODESETTING} \ - " - -MACHINE_EXTRA_RRECOMMENDS += "linux-firmware eee-acpi-scripts" - -GLIBC_ADDONS = "nptl" - -EXTRA_OECONF_append_pn-matchbox-panel-2 = " --with-battery=acpi" diff --git a/yocto-poky/meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf b/yocto-poky/meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf deleted file mode 100644 index f3ad12d98..000000000 --- a/yocto-poky/meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf +++ /dev/null @@ -1,33 +0,0 @@ -#@TYPE: Machine -#@DESCRIPTION: Machine configuration for running - -TARGET_FPU = "" - -require conf/machine/include/tune-ppce300c3.inc - -KERNEL_IMAGETYPE = "uImage" - -EXTRA_IMAGEDEPENDS += "u-boot" -UBOOT_MACHINE_mpc8315e-rdb = "MPC8315ERDB_config" - -SERIAL_CONSOLE = "115200 ttyS0" - -MACHINE_FEATURES = "keyboard pci ext2 ext3 serial" - -PREFERRED_VERSION_linux-yocto ?= "4.4%" -PREFERRED_PROVIDER_virtual/kernel = "linux-yocto" - -PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -XSERVER ?= "xserver-xorg \ - xf86-input-evdev \ - xf86-video-fbdev" - -PREFERRED_VERSION_u-boot ?= "v2013.07%" -UBOOT_ENTRYPOINT = "0x00000000" - -KERNEL_DEVICETREE = "mpc8315erdb.dtb" - -MACHINE_EXTRA_RRECOMMENDS = " kernel-modules" - -IMAGE_FSTYPES ?= "jffs2 tar.bz2" -JFFS2_ERASEBLOCK = "0x4000" diff --git a/yocto-poky/meta-yocto-bsp/lib/oeqa/controllers/__init__.py b/yocto-poky/meta-yocto-bsp/lib/oeqa/controllers/__init__.py deleted file mode 100644 index e69de29bb..000000000 diff --git a/yocto-poky/meta-yocto-bsp/lib/oeqa/controllers/beaglebonetarget.py b/yocto-poky/meta-yocto-bsp/lib/oeqa/controllers/beaglebonetarget.py deleted file mode 100644 index 0f1aeb398..000000000 --- a/yocto-poky/meta-yocto-bsp/lib/oeqa/controllers/beaglebonetarget.py +++ /dev/null @@ -1,98 +0,0 @@ -# Copyright (C) 2014 Intel Corporation -# -# Released under the MIT license (see COPYING.MIT) - -# This module adds support to testimage.bbclass to deploy images and run -# tests on a BeagleBone (original "white" or Black models). The device must -# be set up as per README.hardware and the master image should be deployed -# onto the card so that it boots into it by default. For booting into the -# image under test we interact with u-boot over serial, so for the -# BeagleBone Black you will need an additional TTL serial cable since a -# serial interface isn't automatically provided over the USB connection as -# it is on the original BeagleBone ("white") version. The separate ext3 -# partition that will contain the image to be tested must be labelled -# "testrootfs" so that the deployment code below can find it. -# -# NOTE: for the BeagleBone "white" (original version) you may need to use -# a script which handles the serial device disappearing on power down, such -# as scripts/contrib/serdevtry in OE-Core. - -import os -import bb -import time -import subprocess -import sys -import pexpect - -import oeqa.utils.sshcontrol as sshcontrol -from oeqa.controllers.masterimage import MasterImageHardwareTarget - - -class BeagleBoneTarget(MasterImageHardwareTarget): - - dtbs = {'uImage-am335x-bone.dtb': 'am335x-bone.dtb', 'uImage-am335x-boneblack.dtb': 'am335x-boneblack.dtb'} - - @classmethod - def get_extra_files(self): - return list(self.dtbs.keys()) - - def __init__(self, d): - super(BeagleBoneTarget, self).__init__(d) - - self.image_fstype = self.get_image_fstype(d) - self.deploy_cmds = [ - 'mkdir -p /mnt/testrootfs', - 'mount -L testrootfs /mnt/testrootfs', - 'rm -rf /mnt/testrootfs/*', - 'tar xvf ~/test-rootfs.%s -C /mnt/testrootfs' % self.image_fstype, - '[ -e /mnt/testrootfs/boot/uImage ] || [ -L /mnt/testrootfs/boot/uImage ] || cp ~/test-kernel /mnt/testrootfs/boot/uImage', - ] - - for _, dtbfn in self.dtbs.iteritems(): - # Kernel and dtb files may not be in the image, so copy them if not - self.deploy_cmds.append('[ -e /mnt/testrootfs/boot/{0} ] || cp ~/{0} /mnt/testrootfs/boot/'.format(dtbfn)) - - if not self.serialcontrol_cmd: - bb.fatal("This TEST_TARGET needs a TEST_SERIALCONTROL_CMD defined in local.conf.") - - - def _deploy(self): - self.master.run("umount /boot; umount /mnt/testrootfs;") - self.master.ignore_status = False - # Kernel and dtb files may not be in the image, so copy them just in case - self.master.copy_to(self.kernel, "~/test-kernel") - kernelpath = os.path.dirname(self.kernel) - for dtborig, dtbfn in self.dtbs.iteritems(): - dtbfile = os.path.join(kernelpath, dtborig) - if os.path.exists(dtbfile): - self.master.copy_to(dtbfile, "~/%s" % dtbfn) - self.master.copy_to(self.rootfs, "~/test-rootfs.%s" % self.image_fstype) - for cmd in self.deploy_cmds: - self.master.run(cmd) - - def _start(self, params=None): - self.power_cycle(self.master) - try: - serialconn = pexpect.spawn(self.serialcontrol_cmd, env=self.origenv, logfile=sys.stdout) - # We'd wait for "U-Boot" here but sometimes we connect too late on BeagleBone white to see it - serialconn.expect("NAND:") - serialconn.expect("MMC:") - serialconn.sendline("a") - serialconn.expect("U-Boot#") - serialconn.sendline("setenv bootpart 0:3") - serialconn.expect("U-Boot#") - serialconn.sendline("setenv mmcroot /dev/mmcblk0p3 ro") - serialconn.expect("U-Boot#") - serialconn.sendline("boot") - serialconn.expect("login:", timeout=120) - serialconn.close() - except pexpect.ExceptionPexpect as e: - bb.fatal('Serial interaction failed: %s' % str(e)) - - def _wait_until_booted(self): - try: - serialconn = pexpect.spawn(self.serialcontrol_cmd, env=self.origenv, logfile=sys.stdout) - serialconn.expect("login:", timeout=120) - serialconn.close() - except pexpect.ExceptionPexpect as e: - bb.fatal('Serial interaction failed: %s' % str(e)) diff --git a/yocto-poky/meta-yocto-bsp/lib/oeqa/controllers/edgeroutertarget.py b/yocto-poky/meta-yocto-bsp/lib/oeqa/controllers/edgeroutertarget.py deleted file mode 100644 index b3338ca85..000000000 --- a/yocto-poky/meta-yocto-bsp/lib/oeqa/controllers/edgeroutertarget.py +++ /dev/null @@ -1,90 +0,0 @@ -# Copyright (C) 2014 Intel Corporation -# -# Released under the MIT license (see COPYING.MIT) - -# This module adds support to testimage.bbclass to deploy images and run -# tests on a Ubiquiti Networks EdgeRouter Lite. The device must be set up -# to boot into the master image already - the easiest way to do that is as -# follows: -# -# 1. Take out the internal USB drive and plug it into your PC -# 2. Repartition the USB drive so that you have three partitions in this -# order: -# 1: vfat, labelled "boot" (it will need to be formatted with mkfs.vfat -# for this to be possible, since FAT partitions formatted under -# DOS/Windows will only support uppercase labels) -# 2: ext3 (for master image) labelled "testmaster" -# 3: ext3 (for image under test) labelled "testrootfs" -# 3. Copy the kernel to be used by the master image to the FAT partition -# (it should be named "vmlinux.64" with the factory u-boot configuration) -# 4. Install the master image onto the "testmaster" ext3 partition. If -# you do this by just extracting the contents of an image onto the -# partition, you will also likely need to create the master image marker -# file /etc/masterimage within this partition so that we can tell when -# we're booted into it that it is the master image. -# 5. Put the USB drive back into the device, and ensure the console port -# and first ethernet port are connected before powering on -# -# TEST_SERIALCONTROL_CMD will need to be set in local.conf so that we can -# interact with u-boot over the serial console port. - -import os -import bb -import time -import subprocess -import sys -import pexpect - -import oeqa.utils.sshcontrol as sshcontrol -from oeqa.controllers.masterimage import MasterImageHardwareTarget - - -class EdgeRouterTarget(MasterImageHardwareTarget): - - def __init__(self, d): - super(EdgeRouterTarget, self).__init__(d) - - self.image_fstype = self.get_image_fstype(d) - self.deploy_cmds = [ - 'mount -L boot /boot', - 'mkdir -p /mnt/testrootfs', - 'mount -L testrootfs /mnt/testrootfs', - 'cp ~/test-kernel /boot', - 'rm -rf /mnt/testrootfs/*', - 'tar xvf ~/test-rootfs.%s -C /mnt/testrootfs' % self.image_fstype - ] - if not self.serialcontrol_cmd: - bb.fatal("This TEST_TARGET needs a TEST_SERIALCONTROL_CMD defined in local.conf.") - - - def _deploy(self): - self.master.run("umount /mnt/testrootfs;") - self.master.ignore_status = False - self.master.copy_to(self.kernel, "~/test-kernel") - self.master.copy_to(self.rootfs, "~/test-rootfs.%s" % self.image_fstype) - for cmd in self.deploy_cmds: - self.master.run(cmd) - - def _start(self, params=None): - self.power_cycle(self.master) - try: - serialconn = pexpect.spawn(self.serialcontrol_cmd, env=self.origenv, logfile=sys.stdout) - serialconn.expect("U-Boot") - serialconn.sendline("a") - serialconn.expect("Octeon ubnt_e100#") - serialconn.sendline("fatload usb 0:1 $loadaddr test-kernel") - serialconn.expect(" bytes read") - serialconn.expect("Octeon ubnt_e100#") - serialconn.sendline("bootoctlinux $loadaddr coremask=0x3 root=/dev/sda3 rw rootwait mtdparts=phys_mapped_flash:512k(boot0),512k(boot1),64k@3072k(eeprom)") - serialconn.expect("login:", timeout=120) - serialconn.close() - except pexpect.ExceptionPexpect as e: - bb.fatal('Serial interaction failed: %s' % str(e)) - - def _wait_until_booted(self): - try: - serialconn = pexpect.spawn(self.serialcontrol_cmd, env=self.origenv, logfile=sys.stdout) - serialconn.expect("login:", timeout=120) - serialconn.close() - except pexpect.ExceptionPexpect as e: - bb.fatal('Serial interaction failed: %s' % str(e)) diff --git a/yocto-poky/meta-yocto-bsp/lib/oeqa/controllers/grubtarget.py b/yocto-poky/meta-yocto-bsp/lib/oeqa/controllers/grubtarget.py deleted file mode 100644 index 7bc807d2b..000000000 --- a/yocto-poky/meta-yocto-bsp/lib/oeqa/controllers/grubtarget.py +++ /dev/null @@ -1,71 +0,0 @@ -# Copyright (C) 2014 Intel Corporation -# -# Released under the MIT license (see COPYING.MIT) - -# This module adds support to testimage.bbclass to deploy images and run -# tests on a Generic PC that boots using grub bootloader. The device must -# be set up as per README.hardware and the master image should be deployed -# onto the harddisk so that it boots into it by default.For booting into the -# image under test we interact with grub over serial, so for the -# Generic PC you will need an additional serial cable and device under test -# needs to have a serial interface. The separate ext3 -# partition that will contain the image to be tested must be labelled -# "testrootfs" so that the deployment code below can find it. - -import os -import bb -import time -import subprocess -import sys -import pexpect - -import oeqa.utils.sshcontrol as sshcontrol -from oeqa.controllers.masterimage import MasterImageHardwareTarget - -class GrubTarget(MasterImageHardwareTarget): - - def __init__(self, d): - super(GrubTarget, self).__init__(d) - self.deploy_cmds = [ - 'mount -L boot /boot', - 'mkdir -p /mnt/testrootfs', - 'mount -L testrootfs /mnt/testrootfs', - 'cp ~/test-kernel /boot', - 'rm -rf /mnt/testrootfs/*', - 'tar xvf ~/test-rootfs.%s -C /mnt/testrootfs' % self.image_fstype, - ] - - if not self.serialcontrol_cmd: - bb.fatal("This TEST_TARGET needs a TEST_SERIALCONTROL_CMD defined in local.conf.") - - - def _deploy(self): - # make sure these aren't mounted - self.master.run("umount /boot; umount /mnt/testrootfs;") - self.master.ignore_status = False - # Kernel files may not be in the image, so copy them just in case - self.master.copy_to(self.rootfs, "~/test-rootfs." + self.image_fstype) - self.master.copy_to(self.kernel, "~/test-kernel") - for cmd in self.deploy_cmds: - self.master.run(cmd) - - def _start(self, params=None): - self.power_cycle(self.master) - try: - serialconn = pexpect.spawn(self.serialcontrol_cmd, env=self.origenv, logfile=sys.stdout) - serialconn.expect("GNU GRUB version 2.00") - serialconn.expect("Linux") - serialconn.sendline("x") - serialconn.expect("login:", timeout=120) - serialconn.close() - except pexpect.ExceptionPexpect as e: - bb.fatal('Serial interaction failed: %s' % str(e)) - - def _wait_until_booted(self): - try: - serialconn = pexpect.spawn(self.serialcontrol_cmd, env=self.origenv, logfile=sys.stdout) - serialconn.expect("login:", timeout=120) - serialconn.close() - except pexpect.ExceptionPexpect as e: - bb.fatal('Serial interaction failed: %s' % str(e)) - diff --git a/yocto-poky/meta-yocto-bsp/lib/oeqa/selftest/__init__.py b/yocto-poky/meta-yocto-bsp/lib/oeqa/selftest/__init__.py deleted file mode 100644 index e69de29bb..000000000 diff --git a/yocto-poky/meta-yocto-bsp/lib/oeqa/selftest/gummiboot.py b/yocto-poky/meta-yocto-bsp/lib/oeqa/selftest/gummiboot.py deleted file mode 100644 index 00aa36f60..000000000 --- a/yocto-poky/meta-yocto-bsp/lib/oeqa/selftest/gummiboot.py +++ /dev/null @@ -1,83 +0,0 @@ -from oeqa.selftest.base import oeSelfTest -from oeqa.utils.commands import runCmd, bitbake, get_bb_var, runqemu -from oeqa.utils.decorators import testcase -import re -import os -import sys -import logging - - -class Gummiboot(oeSelfTest): - - def _common_setup(self): - """ - Common setup for test cases: 1101, 1103 - """ - - # Set EFI_PROVIDER = "gummiboot" and MACHINE = "genericx86-64" in conf/local.conf - features = 'EFI_PROVIDER = "gummiboot"\n' - features += 'MACHINE = "genericx86-64"' - self.append_config(features) - - def _common_build(self): - """ - Common build for test cases: 1101, 1103 - """ - - # Build a genericx86-64/efi gummiboot image - bitbake('syslinux syslinux-native parted-native dosfstools-native mtools-native core-image-minimal') - - - @testcase(1101) - def test_efi_gummiboot_images_can_be_built(self): - """ - Summary: Check if efi/gummiboot images can be built - Expected: 1. File gummibootx64.efi should be available in build/tmp/deploy/images/genericx86-64 - 2. Efi/gummiboot images can be built - Product: oe-core - Author: Ionut Chisanovici - AutomatedBy: Daniel Istrate - """ - - # We'd use DEPLOY_DIR_IMAGE here, except that we need its value for - # MACHINE="genericx86-64 which is probably not the one configured - gummibootfile = os.path.join(get_bb_var('DEPLOY_DIR'), 'images', 'genericx86-64', 'gummibootx64.efi') - - self._common_setup() - - # Ensure we're actually testing that this gets built and not that - # it was around from an earlier build - bitbake('-c cleansstate gummiboot') - runCmd('rm -f %s' % gummibootfile) - - self._common_build() - - found = os.path.isfile(gummibootfile) - self.assertTrue(found, 'Gummiboot file %s not found' % gummibootfile) - - @testcase(1103) - def test_wic_command_can_create_efi_gummiboot_installation_images(self): - """ - Summary: Check that wic command can create efi/gummiboot installation images - Expected: A .direct file in folder /var/tmp/wic/ must be created. - Product: oe-core - Author: Ionut Chisanovici - AutomatedBy: Daniel Istrate - """ - - self._common_setup() - self._common_build() - - # Create efi/gummiboot installation images - wic_create_cmd = 'wic create mkgummidisk -e core-image-minimal' - result = runCmd(wic_create_cmd) - - # Find file written by wic from output - res = re.search('(/var/tmp/wic/.*\.direct)', result.output) - if res: - direct_file = res.group(1) - # Check it actually exists - if not os.path.exists(direct_file): - self.fail('wic reported direct file "%s" does not exist; wic output:\n%s' % (direct_file, result.output)) - else: - self.fail('No .direct file reported in wic output:\n%s' % result.output) diff --git a/yocto-poky/meta-yocto-bsp/lib/oeqa/yoctobsp.py b/yocto-poky/meta-yocto-bsp/lib/oeqa/yoctobsp.py deleted file mode 100644 index 4c539a1f3..000000000 --- a/yocto-poky/meta-yocto-bsp/lib/oeqa/yoctobsp.py +++ /dev/null @@ -1,39 +0,0 @@ -import unittest -import os -import logging -import tempfile -import shutil - -from oeqa.selftest.base import oeSelfTest -from oeqa.utils.commands import runCmd -from oeqa.utils.decorators import skipUnlessPassed - -class YoctoBSP(oeSelfTest): - - @classmethod - def setUpClass(self): - result = runCmd("yocto-bsp list karch") - self.karchs = [karch.lstrip() for karch in result.output.splitlines()][1:] - - def test_yoctobsp_listproperties(self): - for karch in self.karchs: - result = runCmd("yocto-bsp list %s properties" % karch) - self.assertEqual(0, result.status, msg="Properties from %s architecture could not be listed" % karch) - - def test_yoctobsp_create(self): - # Generate a temporal file and folders for each karch - json = "{\"use_default_kernel\":\"yes\"}\n" - fd = tempfile.NamedTemporaryFile(delete=False) - fd.write(json) - fd.close() - tmpfolders = dict([(karch, tempfile.mkdtemp()) for karch in self.karchs]) - # Create BSP - for karch in self.karchs: - result = runCmd("yocto-bsp create test %s -o %s -i %s" % (karch, "%s/unitest" % tmpfolders[karch], fd.name)) - self.assertEqual(0, result.status, msg="Could not create a BSP with architecture %s using %s " % (karch, fd.name)) - # Remove tmp file/folders - os.unlink(fd.name) - self.assertFalse(os.path.exists(fd.name), msg = "Temporal file %s could not be removed" % fd.name) - for tree in tmpfolders.values(): - shutil.rmtree(tree) - self.assertFalse(os.path.exists(tree), msg = "Temporal folder %s could not be removed" % tree) diff --git a/yocto-poky/meta-yocto-bsp/recipes-bsp/formfactor/formfactor/beaglebone/machconfig b/yocto-poky/meta-yocto-bsp/recipes-bsp/formfactor/formfactor/beaglebone/machconfig deleted file mode 100644 index ffce01227..000000000 --- a/yocto-poky/meta-yocto-bsp/recipes-bsp/formfactor/formfactor/beaglebone/machconfig +++ /dev/null @@ -1,3 +0,0 @@ -# Assume a USB mouse and keyboard are connected -HAVE_TOUCHSCREEN=0 -HAVE_KEYBOARD=1 diff --git a/yocto-poky/meta-yocto-bsp/recipes-bsp/formfactor/formfactor/genericx86-64/machconfig b/yocto-poky/meta-yocto-bsp/recipes-bsp/formfactor/formfactor/genericx86-64/machconfig deleted file mode 100644 index a81a23bf5..000000000 --- a/yocto-poky/meta-yocto-bsp/recipes-bsp/formfactor/formfactor/genericx86-64/machconfig +++ /dev/null @@ -1,6 +0,0 @@ -HAVE_TOUCHSCREEN=0 -HAVE_KEYBOARD=1 - -DISPLAY_CAN_ROTATE=0 -DISPLAY_ORIENTATION=0 -DISPLAY_DPI=133 diff --git a/yocto-poky/meta-yocto-bsp/recipes-bsp/formfactor/formfactor/genericx86/machconfig b/yocto-poky/meta-yocto-bsp/recipes-bsp/formfactor/formfactor/genericx86/machconfig deleted file mode 100644 index a81a23bf5..000000000 --- a/yocto-poky/meta-yocto-bsp/recipes-bsp/formfactor/formfactor/genericx86/machconfig +++ /dev/null @@ -1,6 +0,0 @@ -HAVE_TOUCHSCREEN=0 -HAVE_KEYBOARD=1 - -DISPLAY_CAN_ROTATE=0 -DISPLAY_ORIENTATION=0 -DISPLAY_DPI=133 diff --git a/yocto-poky/meta-yocto-bsp/recipes-bsp/formfactor/formfactor_0.0.bbappend b/yocto-poky/meta-yocto-bsp/recipes-bsp/formfactor/formfactor_0.0.bbappend deleted file mode 100644 index 72d991c7e..000000000 --- a/yocto-poky/meta-yocto-bsp/recipes-bsp/formfactor/formfactor_0.0.bbappend +++ /dev/null @@ -1 +0,0 @@ -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" diff --git a/yocto-poky/meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx-check/gma500-gfx-check.conf b/yocto-poky/meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx-check/gma500-gfx-check.conf deleted file mode 100644 index 74d33c871..000000000 --- a/yocto-poky/meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx-check/gma500-gfx-check.conf +++ /dev/null @@ -1,2 +0,0 @@ -# Mimic modprobe's install funcitonality with busybox's modprobe -install gma500_gfx dmesg | grep gma500_gfx_checked || { /etc/modprobe.d/gma500-gfx-check.sh || modprobe gma500_gfx; } diff --git a/yocto-poky/meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx-check/gma500-gfx-check.sh b/yocto-poky/meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx-check/gma500-gfx-check.sh deleted file mode 100644 index 75cda99f5..000000000 --- a/yocto-poky/meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx-check/gma500-gfx-check.sh +++ /dev/null @@ -1,15 +0,0 @@ -#!/bin/sh - -# Check for devices we wish to avoid gma500_gfx for -DEVICES="0x8119 0x4108" - -# Checked flag to avoid infinite modprobe -echo "gma500_gfx_checked" >> /dev/kmsg; - -for DEVICE in $DEVICES; do - if udevadm trigger --subsystem-match=pci --verbose --attr-match=device=$DEVICE | grep "pci" >> /dev/null ; then - echo "Found $DEVICE, avoiding gma500_gfx module" >> /dev/kmsg; - exit 0 - fi -done -exit 1 diff --git a/yocto-poky/meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx-check_1.0.bb b/yocto-poky/meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx-check_1.0.bb deleted file mode 100644 index 00680de89..000000000 --- a/yocto-poky/meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx-check_1.0.bb +++ /dev/null @@ -1,18 +0,0 @@ -SUMMARY = "Intel gma500_gfx fix for certain hardware" -DESCRIPTION = "Avoid inserting gma500_gfx module for certain hardware devices." -LICENSE="GPLv2" -LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-licenses/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6" - -SRC_URI = "file://gma500-gfx-check.conf \ - file://gma500-gfx-check.sh " - -do_install(){ - install -d ${D}${sysconfdir}/modprobe.d/ - install -m 755 ${WORKDIR}/gma500-gfx-check.sh ${D}${sysconfdir}/modprobe.d/gma500-gfx-check.sh - install -m 644 ${WORKDIR}/gma500-gfx-check.conf ${D}${sysconfdir}/modprobe.d/gma500-gfx-check.conf -} - -FILES_${PN}="${sysconfdir}/modprobe.d/gma500-gfx-check.conf \ - ${sysconfdir}/modprobe.d/gma500-gfx-check.sh" - -COMPATIBLE_MACHINE = "genericx86" diff --git a/yocto-poky/meta-yocto-bsp/recipes-core/packagegroups/packagegroup-core-tools-profile.bbappend b/yocto-poky/meta-yocto-bsp/recipes-core/packagegroups/packagegroup-core-tools-profile.bbappend deleted file mode 100644 index f86595c00..000000000 --- a/yocto-poky/meta-yocto-bsp/recipes-core/packagegroups/packagegroup-core-tools-profile.bbappend +++ /dev/null @@ -1,2 +0,0 @@ -RDEPENDS_${PN}_append_genericx86 = " lttng-ust systemtap" - diff --git a/yocto-poky/meta-yocto-bsp/recipes-core/uclibc/uclibc/genericx86-64/uClibc.machine b/yocto-poky/meta-yocto-bsp/recipes-core/uclibc/uclibc/genericx86-64/uClibc.machine deleted file mode 100644 index 305dc64de..000000000 --- a/yocto-poky/meta-yocto-bsp/recipes-core/uclibc/uclibc/genericx86-64/uClibc.machine +++ /dev/null @@ -1,69 +0,0 @@ -# -# Automatically generated make config: don't edit -# Fri Nov 23 15:49:33 2007 -# -# TARGET_alpha is not set -# TARGET_arm is not set -# TARGET_bfin is not set -# TARGET_cris is not set -# TARGET_e1 is not set -# TARGET_frv is not set -# TARGET_h8300 is not set -# TARGET_hppa is not set -# TARGET_i386=y -# TARGET_i960 is not set -# TARGET_ia64 is not set -# TARGET_m68k is not set -# TARGET_microblaze is not set -# TARGET_mips is not set -# TARGET_nios is not set -# TARGET_nios2 is not set -# TARGET_powerpc is not set -# TARGET_sh is not set -# TARGET_sh64 is not set -# TARGET_sparc is not set -# TARGET_v850 is not set -# TARGET_vax is not set -TARGET_x86_64=y - -# -# Target Architecture Features and Options -# -TARGET_ARCH="x86_64" -FORCE_OPTIONS_FOR_ARCH=y -# CONFIG_GENERIC_386 is not set -# CONFIG_386 is not set -# CONFIG_486 is not set -# CONFIG_586 is not set -# CONFIG_586MMX is not set -# CONFIG_686 is not set -# CONFIG_PENTIUMII is not set -# CONFIG_PENTIUMIII is not set -# CONFIG_PENTIUM4 is not set -# CONFIG_K6 is not set -# CONFIG_K7 is not set -# CONFIG_ELAN is not set -# CONFIG_CRUSOE is not set -# CONFIG_WINCHIPC6 is not set -# CONFIG_WINCHIP2 is not set -# CONFIG_CYRIXIII is not set -# CONFIG_NEHEMIAH is not set -TARGET_SUBARCH="" - -# -# Using ELF file format -# -ARCH_LITTLE_ENDIAN=y - -# -# Using Little Endian -# -ARCH_HAS_MMU=y -ARCH_USE_MMU=y -UCLIBC_HAS_FLOATS=y -UCLIBC_HAS_FPU=y -DO_C99_MATH=y -KERNEL_HEADERS="/usr/include" -HAVE_DOT_CONFIG=y - -UCLIBC_HAS_FENV=y diff --git a/yocto-poky/meta-yocto-bsp/recipes-core/uclibc/uclibc/genericx86/uClibc.machine b/yocto-poky/meta-yocto-bsp/recipes-core/uclibc/uclibc/genericx86/uClibc.machine deleted file mode 100644 index 5df15f94c..000000000 --- a/yocto-poky/meta-yocto-bsp/recipes-core/uclibc/uclibc/genericx86/uClibc.machine +++ /dev/null @@ -1,69 +0,0 @@ -# -# Automatically generated make config: don't edit -# Fri Nov 23 15:49:33 2007 -# -# TARGET_alpha is not set -# TARGET_arm is not set -# TARGET_bfin is not set -# TARGET_cris is not set -# TARGET_e1 is not set -# TARGET_frv is not set -# TARGET_h8300 is not set -# TARGET_hppa is not set -TARGET_i386=y -# TARGET_i960 is not set -# TARGET_ia64 is not set -# TARGET_m68k is not set -# TARGET_microblaze is not set -# TARGET_mips is not set -# TARGET_nios is not set -# TARGET_nios2 is not set -# TARGET_powerpc is not set -# TARGET_sh is not set -# TARGET_sh64 is not set -# TARGET_sparc is not set -# TARGET_v850 is not set -# TARGET_vax is not set -# TARGET_x86_64 is not set - -# -# Target Architecture Features and Options -# -TARGET_ARCH="i386" -FORCE_OPTIONS_FOR_ARCH=y -CONFIG_GENERIC_386=y -# CONFIG_386 is not set -# CONFIG_486 is not set -# CONFIG_586 is not set -# CONFIG_586MMX is not set -# CONFIG_686 is not set -# CONFIG_PENTIUMII is not set -# CONFIG_PENTIUMIII is not set -# CONFIG_PENTIUM4 is not set -# CONFIG_K6 is not set -# CONFIG_K7 is not set -# CONFIG_ELAN is not set -# CONFIG_CRUSOE is not set -# CONFIG_WINCHIPC6 is not set -# CONFIG_WINCHIP2 is not set -# CONFIG_CYRIXIII is not set -# CONFIG_NEHEMIAH is not set -TARGET_SUBARCH="" - -# -# Using ELF file format -# -ARCH_LITTLE_ENDIAN=y - -# -# Using Little Endian -# -ARCH_HAS_MMU=y -ARCH_USE_MMU=y -UCLIBC_HAS_FLOATS=y -UCLIBC_HAS_FPU=y -DO_C99_MATH=y -KERNEL_HEADERS="/usr/include" -HAVE_DOT_CONFIG=y - -UCLIBC_HAS_FENV=y diff --git a/yocto-poky/meta-yocto-bsp/recipes-core/uclibc/uclibc_git.bbappend b/yocto-poky/meta-yocto-bsp/recipes-core/uclibc/uclibc_git.bbappend deleted file mode 100644 index 72d991c7e..000000000 --- a/yocto-poky/meta-yocto-bsp/recipes-core/uclibc/uclibc_git.bbappend +++ /dev/null @@ -1 +0,0 @@ -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" diff --git a/yocto-poky/meta-yocto-bsp/recipes-graphics/xorg-xserver/xserver-xf86-config/genericx86-64/xorg.conf b/yocto-poky/meta-yocto-bsp/recipes-graphics/xorg-xserver/xserver-xf86-config/genericx86-64/xorg.conf deleted file mode 100644 index e69de29bb..000000000 diff --git a/yocto-poky/meta-yocto-bsp/recipes-graphics/xorg-xserver/xserver-xf86-config/genericx86/xorg.conf b/yocto-poky/meta-yocto-bsp/recipes-graphics/xorg-xserver/xserver-xf86-config/genericx86/xorg.conf deleted file mode 100644 index e69de29bb..000000000 diff --git a/yocto-poky/meta-yocto-bsp/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend b/yocto-poky/meta-yocto-bsp/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend deleted file mode 100644 index 72d991c7e..000000000 --- a/yocto-poky/meta-yocto-bsp/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend +++ /dev/null @@ -1 +0,0 @@ -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" diff --git a/yocto-poky/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_4.1.bbappend b/yocto-poky/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_4.1.bbappend deleted file mode 100644 index b20a18bfe..000000000 --- a/yocto-poky/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_4.1.bbappend +++ /dev/null @@ -1,23 +0,0 @@ -KBRANCH_genericx86 = "standard/base" -KBRANCH_genericx86-64 = "standard/base" -KBRANCH_edgerouter = "standard/edgerouter" -KBRANCH_beaglebone = "standard/beaglebone" -KBRANCH_mpc8315e-rdb = "standard/fsl-mpc8315e-rdb" - -KMACHINE_genericx86 ?= "common-pc" -KMACHINE_genericx86-64 ?= "common-pc-64" - -SRCREV_machine_genericx86 ?= "304caa9480f19875e717faf3cad8cb7ecd758733" -SRCREV_machine_genericx86-64 ?= "304caa9480f19875e717faf3cad8cb7ecd758733" -SRCREV_machine_edgerouter ?= "79a31b9d23db126f8a6be3eb88fd683056a213f1" -SRCREV_machine_beaglebone ?= "efb6ffb2ca96a364f916c9890ad023fc595e0e6e" -SRCREV_machine_mpc8315e-rdb ?= "79a31b9d23db126f8a6be3eb88fd683056a213f1" - -COMPATIBLE_MACHINE_genericx86 = "genericx86" -COMPATIBLE_MACHINE_genericx86-64 = "genericx86-64" -COMPATIBLE_MACHINE_edgerouter = "edgerouter" -COMPATIBLE_MACHINE_beaglebone = "beaglebone" -COMPATIBLE_MACHINE_mpc8315e-rdb = "mpc8315e-rdb" - -LINUX_VERSION_genericx86 = "4.1.18" -LINUX_VERSION_genericx86-64 = "4.1.18" diff --git a/yocto-poky/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_4.4.bbappend b/yocto-poky/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_4.4.bbappend deleted file mode 100644 index e31b0c8f2..000000000 --- a/yocto-poky/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_4.4.bbappend +++ /dev/null @@ -1,23 +0,0 @@ -KBRANCH_genericx86 = "standard/base" -KBRANCH_genericx86-64 = "standard/base" - -KMACHINE_genericx86 ?= "common-pc" -KMACHINE_genericx86-64 ?= "common-pc-64" -KBRANCH_edgerouter = "standard/edgerouter" -KBRANCH_beaglebone = "standard/beaglebone" -KBRANCH_mpc8315e-rdb = "standard/fsl-mpc8315e-rdb" - -SRCREV_machine_genericx86 ?= "3d2455f9da30f923c6bd69014fad4cc4ea738be6" -SRCREV_machine_genericx86-64 ?= "3d2455f9da30f923c6bd69014fad4cc4ea738be6" -SRCREV_machine_edgerouter ?= "ff4c4ef15b51f45b9106d71bf1f62fe7c02e63c2" -SRCREV_machine_beaglebone ?= "ff4c4ef15b51f45b9106d71bf1f62fe7c02e63c2" -SRCREV_machine_mpc8315e-rdb ?= "df00877ef9387b38b9601c82db57de2a1b23ce53" - -COMPATIBLE_MACHINE_genericx86 = "genericx86" -COMPATIBLE_MACHINE_genericx86-64 = "genericx86-64" -COMPATIBLE_MACHINE_edgerouter = "edgerouter" -COMPATIBLE_MACHINE_beaglebone = "beaglebone" -COMPATIBLE_MACHINE_mpc8315e-rdb = "mpc8315e-rdb" - -LINUX_VERSION_genericx86 = "4.4.3" -LINUX_VERSION_genericx86-64 = "4.4.3" -- cgit v1.2.1