summaryrefslogtreecommitdiffstats
path: root/drivers/thermal/samsung/exynos_tmu.c
blob: a033dbbf979e2fca2a675504bae5f80fc7fbcc3c (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
/*
 * exynos_tmu.c - Samsung EXYNOS TMU (Thermal Management Unit)
 *
 *  Copyright (C) 2011 Samsung Electronics
 *  Donggeun Kim <dg77.kim@samsung.com>
 *  Amit Daniel Kachhap <amit.kachhap@linaro.org>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 */

#include <linux/clk.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>

#include "exynos_thermal_common.h"
#include "exynos_tmu.h"
#include "exynos_tmu_data.h"

/**
 * struct exynos_tmu_data : A structure to hold the private data of the TMU
	driver
 * @id: identifier of the one instance of the TMU controller.
 * @pdata: pointer to the tmu platform/configuration data
 * @base: base address of the single instance of the TMU controller.
 * @base_common: base address of the common registers of the TMU controller.
 * @irq: irq number of the TMU controller.
 * @soc: id of the SOC type.
 * @irq_work: pointer to the irq work structure.
 * @lock: lock to implement synchronization.
 * @clk: pointer to the clock structure.
 * @temp_error1: fused value of the first point trim.
 * @temp_error2: fused value of the second point trim.
 * @regulator: pointer to the TMU regulator structure.
 * @reg_conf: pointer to structure to register with core thermal.
 */
struct exynos_tmu_data {
	int id;
	struct exynos_tmu_platform_data *pdata;
	void __iomem *base;
	void __iomem *base_common;
	int irq;
	enum soc_type soc;
	struct work_struct irq_work;
	struct mutex lock;
	struct clk *clk;
	u8 temp_error1, temp_error2;
	struct regulator *regulator;
	struct thermal_sensor_conf *reg_conf;
};

/*
 * TMU treats temperature as a mapped temperature code.
 * The temperature is converted differently depending on the calibration type.
 */
static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
{
	struct exynos_tmu_platform_data *pdata = data->pdata;
	int temp_code;

	if (pdata->cal_mode == HW_MODE)
		return temp;

	if (data->soc == SOC_ARCH_EXYNOS4210)
		/* temp should range between 25 and 125 */
		if (temp < 25 || temp > 125) {
			temp_code = -EINVAL;
			goto out;
		}

	switch (pdata->cal_type) {
	case TYPE_TWO_POINT_TRIMMING:
		temp_code = (temp - pdata->first_point_trim) *
			(data->temp_error2 - data->temp_error1) /
			(pdata->second_point_trim - pdata->first_point_trim) +
			data->temp_error1;
		break;
	case TYPE_ONE_POINT_TRIMMING:
		temp_code = temp + data->temp_error1 - pdata->first_point_trim;
		break;
	default:
		temp_code = temp + pdata->default_temp_offset;
		break;
	}
out:
	return temp_code;
}

/*
 * Calculate a temperature value from a temperature code.
 * The unit of the temperature is degree Celsius.
 */
static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code)
{
	struct exynos_tmu_platform_data *pdata = data->pdata;
	int temp;

	if (pdata->cal_mode == HW_MODE)
		return temp_code;

	if (data->soc == SOC_ARCH_EXYNOS4210)
		/* temp_code should range between 75 and 175 */
		if (temp_code < 75 || temp_code > 175) {
			temp = -ENODATA;
			goto out;
		}

	switch (pdata->cal_type) {
	case TYPE_TWO_POINT_TRIMMING:
		temp = (temp_code - data->temp_error1) *
			(pdata->second_point_trim - pdata->first_point_trim) /
			(data->temp_error2 - data->temp_error1) +
			pdata->first_point_trim;
		break;
	case TYPE_ONE_POINT_TRIMMING:
		temp = temp_code - data->temp_error1 + pdata->first_point_trim;
		break;
	default:
		temp = temp_code - pdata->default_temp_offset;
		break;
	}
out:
	return temp;
}

static int exynos_tmu_initialize(struct platform_device *pdev)
{
	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
	struct exynos_tmu_platform_data *pdata = data->pdata;
	const struct exynos_tmu_registers *reg = pdata->registers;
	unsigned int status, trim_info = 0, con;
	unsigned int rising_threshold = 0, falling_threshold = 0;
	int ret = 0, threshold_code, i, trigger_levs = 0;

	mutex_lock(&data->lock);
	clk_enable(data->clk);

	if (TMU_SUPPORTS(pdata, READY_STATUS)) {
		status = readb(data->base + reg->tmu_status);
		if (!status) {
			ret = -EBUSY;
			goto out;
		}
	}

	if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
		__raw_writel(1, data->base + reg->triminfo_ctrl);

	if (pdata->cal_mode == HW_MODE)
		goto skip_calib_data;

	/* Save trimming info in order to perform calibration */
	if (data->soc == SOC_ARCH_EXYNOS5440) {
		/*
		 * For exynos5440 soc triminfo value is swapped between TMU0 and
		 * TMU2, so the below logic is needed.
		 */
		switch (data->id) {
		case 0:
			trim_info = readl(data->base +
			EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
			break;
		case 1:
			trim_info = readl(data->base + reg->triminfo_data);
			break;
		case 2:
			trim_info = readl(data->base -
			EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
		}
	} else {
		trim_info = readl(data->base + reg->triminfo_data);
	}
	data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
	data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
				EXYNOS_TMU_TEMP_MASK);

	if (!data->temp_error1 ||
		(pdata->min_efuse_value > data->temp_error1) ||
		(data->temp_error1 > pdata->max_efuse_value))
		data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;

	if (!data->temp_error2)
		data->temp_error2 =
			(pdata->efuse_value >> reg->triminfo_85_shift) &
			EXYNOS_TMU_TEMP_MASK;

skip_calib_data:
	if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) {
		dev_err(&pdev->dev, "Invalid max trigger level\n");
		goto out;
	}

	for (i = 0; i < pdata->max_trigger_level; i++) {
		if (!pdata->trigger_levels[i])
			continue;

		if ((pdata->trigger_type[i] == HW_TRIP) &&
		(!pdata->trigger_levels[pdata->max_trigger_level - 1])) {
			dev_err(&pdev->dev, "Invalid hw trigger level\n");
			ret = -EINVAL;
			goto out;
		}

		/* Count trigger levels except the HW trip*/
		if (!(pdata->trigger_type[i] == HW_TRIP))
			trigger_levs++;
	}

	if (data->soc == SOC_ARCH_EXYNOS4210) {
		/* Write temperature code for threshold */
		threshold_code = temp_to_code(data, pdata->threshold);
		if (threshold_code < 0) {
			ret = threshold_code;
			goto out;
		}
		writeb(threshold_code,
			data->base + reg->threshold_temp);
		for (i = 0; i < trigger_levs; i++)
			writeb(pdata->trigger_levels[i], data->base +
			reg->threshold_th0 + i * sizeof(reg->threshold_th0));

		writel(reg->inten_rise_mask, data->base + reg->tmu_intclear);
	} else {
		/* Write temperature code for rising and falling threshold */
		for (i = 0;
		i < trigger_levs && i < EXYNOS_MAX_TRIGGER_PER_REG; i++) {
			threshold_code = temp_to_code(data,
						pdata->trigger_levels[i]);
			if (threshold_code < 0) {
				ret = threshold_code;
				goto out;
			}
			rising_threshold |= threshold_code << 8 * i;
			if (pdata->threshold_falling) {
				threshold_code = temp_to_code(data,
						pdata->trigger_levels[i] -
						pdata->threshold_falling);
				if (threshold_code > 0)
					falling_threshold |=
						threshold_code << 8 * i;
			}
		}

		writel(rising_threshold,
				data->base + reg->threshold_th0);
		writel(falling_threshold,
				data->base + reg->threshold_th1);

		writel((reg->inten_rise_mask << reg->inten_rise_shift) |
			(reg->inten_fall_mask << reg->inten_fall_shift),
				data->base + reg->tmu_intclear);

		/* if last threshold limit is also present */
		i = pdata->max_trigger_level - 1;
		if (pdata->trigger_levels[i] &&
				(pdata->trigger_type[i] == HW_TRIP)) {
			threshold_code = temp_to_code(data,
						pdata->trigger_levels[i]);
			if (threshold_code < 0) {
				ret = threshold_code;
				goto out;
			}
			if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) {
				/* 1-4 level to be assigned in th0 reg */
				rising_threshold |= threshold_code << 8 * i;
				writel(rising_threshold,
					data->base + reg->threshold_th0);
			} else if (i == EXYNOS_MAX_TRIGGER_PER_REG) {
				/* 5th level to be assigned in th2 reg */
				rising_threshold =
				threshold_code << reg->threshold_th3_l0_shift;
				writel(rising_threshold,
					data->base + reg->threshold_th2);
			}
			con = readl(data->base + reg->tmu_ctrl);
			con |= (1 << reg->therm_trip_en_shift);
			writel(con, data->base + reg->tmu_ctrl);
		}
	}
	/*Clear the PMIN in the common TMU register*/
	if (reg->tmu_pmin && !data->id)
		writel(0, data->base_common + reg->tmu_pmin);
out:
	clk_disable(data->clk);
	mutex_unlock(&data->lock);

	return ret;
}

static void exynos_tmu_control(struct platform_device *pdev, bool on)
{
	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
	struct exynos_tmu_platform_data *pdata = data->pdata;
	const struct exynos_tmu_registers *reg = pdata->registers;
	unsigned int con, interrupt_en, cal_val;

	mutex_lock(&data->lock);
	clk_enable(data->clk);

	con = readl(data->base + reg->tmu_ctrl);

	if (pdata->reference_voltage) {
		con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift);
		con |= pdata->reference_voltage << reg->buf_vref_sel_shift;
	}

	if (pdata->gain) {
		con &= ~(reg->buf_slope_sel_mask << reg->buf_slope_sel_shift);
		con |= (pdata->gain << reg->buf_slope_sel_shift);
	}

	if (pdata->noise_cancel_mode) {
		con &= ~(reg->therm_trip_mode_mask <<
					reg->therm_trip_mode_shift);
		con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift);
	}

	if (pdata->cal_mode == HW_MODE) {
		con &= ~(reg->calib_mode_mask << reg->calib_mode_shift);
		cal_val = 0;
		switch (pdata->cal_type) {
		case TYPE_TWO_POINT_TRIMMING:
			cal_val = 3;
			break;
		case TYPE_ONE_POINT_TRIMMING_85:
			cal_val = 2;
			break;
		case TYPE_ONE_POINT_TRIMMING_25:
			cal_val = 1;
			break;
		case TYPE_NONE:
			break;
		default:
			dev_err(&pdev->dev, "Invalid calibration type, using none\n");
		}
		con |= cal_val << reg->calib_mode_shift;
	}

	if (on) {
		con |= (1 << reg->core_en_shift);
		interrupt_en =
			pdata->trigger_enable[3] << reg->inten_rise3_shift |
			pdata->trigger_enable[2] << reg->inten_rise2_shift |
			pdata->trigger_enable[1] << reg->inten_rise1_shift |
			pdata->trigger_enable[0] << reg->inten_rise0_shift;
		if (TMU_SUPPORTS(pdata, FALLING_TRIP))
			interrupt_en |=
				interrupt_en << reg->inten_fall0_shift;
	} else {
		con &= ~(1 << reg->core_en_shift);
		interrupt_en = 0; /* Disable all interrupts */
	}
	writel(interrupt_en, data->base + reg->tmu_inten);
	writel(con, data->base + reg->tmu_ctrl);

	clk_disable(data->clk);
	mutex_unlock(&data->lock);
}

static int exynos_tmu_read(struct exynos_tmu_data *data)
{
	struct exynos_tmu_platform_data *pdata = data->pdata;
	const struct exynos_tmu_registers *reg = pdata->registers;
	u8 temp_code;
	int temp;

	mutex_lock(&data->lock);
	clk_enable(data->clk);

	temp_code = readb(data->base + reg->tmu_cur_temp);
	temp = code_to_temp(data, temp_code);

	clk_disable(data->clk);
	mutex_unlock(&data->lock);

	return temp;
}

#ifdef CONFIG_THERMAL_EMULATION
static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
{
	struct exynos_tmu_data *data = drv_data;
	struct exynos_tmu_platform_data *pdata = data->pdata;
	const struct exynos_tmu_registers *reg = pdata->registers;
	unsigned int val;
	int ret = -EINVAL;

	if (!TMU_SUPPORTS(pdata, EMULATION))
		goto out;

	if (temp && temp < MCELSIUS)
		goto out;

	mutex_lock(&data->lock);
	clk_enable(data->clk);

	val = readl(data->base + reg->emul_con);

	if (temp) {
		temp /= MCELSIUS;

		if (TMU_SUPPORTS(pdata, EMUL_TIME)) {
			val &= ~(EXYNOS_EMUL_TIME_MASK << reg->emul_time_shift);
			val |= (EXYNOS_EMUL_TIME << reg->emul_time_shift);
		}
		val &= ~(EXYNOS_EMUL_DATA_MASK << reg->emul_temp_shift);
		val |= (temp_to_code(data, temp) << reg->emul_temp_shift) |
			EXYNOS_EMUL_ENABLE;
	} else {
		val &= ~EXYNOS_EMUL_ENABLE;
	}

	writel(val, data->base + reg->emul_con);

	clk_disable(data->clk);
	mutex_unlock(&data->lock);
	return 0;
out:
	return ret;
}
#else
static int exynos_tmu_set_emulation(void *drv_data,	unsigned long temp)
	{ return -EINVAL; }
#endif/*CONFIG_THERMAL_EMULATION*/

static void exynos_tmu_work(struct work_struct *work)
{
	struct exynos_tmu_data *data = container_of(work,
			struct exynos_tmu_data, irq_work);
	struct exynos_tmu_platform_data *pdata = data->pdata;
	const struct exynos_tmu_registers *reg = pdata->registers;
	unsigned int val_irq, val_type;

	/* Find which sensor generated this interrupt */
	if (reg->tmu_irqstatus) {
		val_type = readl(data->base_common + reg->tmu_irqstatus);
		if (!((val_type >> data->id) & 0x1))
			goto out;
	}

	exynos_report_trigger(data->reg_conf);
	mutex_lock(&data->lock);
	clk_enable(data->clk);

	/* TODO: take action based on particular interrupt */
	val_irq = readl(data->base + reg->tmu_intstat);
	/* clear the interrupts */
	writel(val_irq, data->base + reg->tmu_intclear);

	clk_disable(data->clk);
	mutex_unlock(&data->lock);
out:
	enable_irq(data->irq);
}

static irqreturn_t exynos_tmu_irq(int irq, void *id)
{
	struct exynos_tmu_data *data = id;

	disable_irq_nosync(irq);
	schedule_work(&data->irq_work);

	return IRQ_HANDLED;
}

#ifdef CONFIG_OF
static const struct of_device_id exynos_tmu_match[] = {
	{
		.compatible = "samsung,exynos4210-tmu",
		.data = (void *)EXYNOS4210_TMU_DRV_DATA,
	},
	{
		.compatible = "samsung,exynos4412-tmu",
		.data = (void *)EXYNOS5250_TMU_DRV_DATA,
	},
	{
		.compatible = "samsung,exynos5250-tmu",
		.data = (void *)EXYNOS5250_TMU_DRV_DATA,
	},
	{
		.compatible = "samsung,exynos5440-tmu",
		.data = (void *)EXYNOS5440_TMU_DRV_DATA,
	},
	{},
};
MODULE_DEVICE_TABLE(of, exynos_tmu_match);
#endif

static inline struct  exynos_tmu_platform_data *exynos_get_driver_data(
			struct platform_device *pdev, int id)
{
#ifdef CONFIG_OF
	struct  exynos_tmu_init_data *data_table;
	struct exynos_tmu_platform_data *tmu_data;
	if (pdev->dev.of_node) {
		const struct of_device_id *match;
		match = of_match_node(exynos_tmu_match, pdev->dev.of_node);
		if (!match)
			return NULL;
		data_table = (struct exynos_tmu_init_data *) match->data;
		if (!data_table || id >= data_table->tmu_count)
			return NULL;
		tmu_data = data_table->tmu_data;
		return (struct exynos_tmu_platform_data *) (tmu_data + id);
	}
#endif
	return NULL;
}

static int exynos_map_dt_data(struct platform_device *pdev)
{
	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
	struct exynos_tmu_platform_data *pdata;
	struct resource res;
	int ret;

	if (!data)
		return -ENODEV;

	/*
	 * Try enabling the regulator if found
	 * TODO: Add regulator as an SOC feature, so that regulator enable
	 * is a compulsory call.
	 */
	data->regulator = devm_regulator_get(&pdev->dev, "vtmu");
	if (!IS_ERR(data->regulator)) {
		ret = regulator_enable(data->regulator);
		if (ret) {
			dev_err(&pdev->dev, "failed to enable vtmu\n");
			return ret;
		}
	} else {
		dev_info(&pdev->dev, "Regulator node (vtmu) not found\n");
	}

	data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
	if (data->id < 0)
		data->id = 0;

	data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
	if (data->irq <= 0) {
		dev_err(&pdev->dev, "failed to get IRQ\n");
		return -ENODEV;
	}

	if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
		dev_err(&pdev->dev, "failed to get Resource 0\n");
		return -ENODEV;
	}

	data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res));
	if (!data->base) {
		dev_err(&pdev->dev, "Failed to ioremap memory\n");
		return -EADDRNOTAVAIL;
	}

	pdata = exynos_get_driver_data(pdev, data->id);
	if (!pdata) {
		dev_err(&pdev->dev, "No platform init data supplied.\n");
		return -ENODEV;
	}
	data->pdata = pdata;
	/*
	 * Check if the TMU shares some registers and then try to map the
	 * memory of common registers.
	 */
	if (!TMU_SUPPORTS(pdata, SHARED_MEMORY))
		return 0;

	if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
		dev_err(&pdev->dev, "failed to get Resource 1\n");
		return -ENODEV;
	}

	data->base_common = devm_ioremap(&pdev->dev, res.start,
					resource_size(&res));
	if (!data->base_common) {
		dev_err(&pdev->dev, "Failed to ioremap memory\n");
		return -ENOMEM;
	}

	return 0;
}

static int exynos_tmu_probe(struct platform_device *pdev)
{
	struct exynos_tmu_data *data;
	struct exynos_tmu_platform_data *pdata;
	struct thermal_sensor_conf *sensor_conf;
	int ret, i;

	data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data),
					GFP_KERNEL);
	if (!data) {
		dev_err(&pdev->dev, "Failed to allocate driver structure\n");
		return -ENOMEM;
	}

	platform_set_drvdata(pdev, data);
	mutex_init(&data->lock);

	ret = exynos_map_dt_data(pdev);
	if (ret)
		return ret;

	pdata = data->pdata;

	INIT_WORK(&data->irq_work, exynos_tmu_work);

	data->clk = devm_clk_get(&pdev->dev, "tmu_apbif");
	if (IS_ERR(data->clk)) {
		dev_err(&pdev->dev, "Failed to get clock\n");
		return  PTR_ERR(data->clk);
	}

	ret = clk_prepare(data->clk);
	if (ret)
		return ret;

	if (pdata->type == SOC_ARCH_EXYNOS ||
		pdata->type == SOC_ARCH_EXYNOS4210 ||
				pdata->type == SOC_ARCH_EXYNOS5440)
		data->soc = pdata->type;
	else {
		ret = -EINVAL;
		dev_err(&pdev->dev, "Platform not supported\n");
		goto err_clk;
	}

	ret = exynos_tmu_initialize(pdev);
	if (ret) {
		dev_err(&pdev->dev, "Failed to initialize TMU\n");
		goto err_clk;
	}

	exynos_tmu_control(pdev, true);

	/* Allocate a structure to register with the exynos core thermal */
	sensor_conf = devm_kzalloc(&pdev->dev,
				sizeof(struct thermal_sensor_conf), GFP_KERNEL);
	if (!sensor_conf) {
		dev_err(&pdev->dev, "Failed to allocate registration struct\n");
		ret = -ENOMEM;
		goto err_clk;
	}
	sprintf(sensor_conf->name, "therm_zone%d", data->id);
	sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read;
	sensor_conf->write_emul_temp =
		(int (*)(void *, unsigned long))exynos_tmu_set_emulation;
	sensor_conf->driver_data = data;
	sensor_conf->trip_data.trip_count = pdata->trigger_enable[0] +
			pdata->trigger_enable[1] + pdata->trigger_enable[2]+
			pdata->trigger_enable[3];

	for (i = 0; i < sensor_conf->trip_data.trip_count; i++) {
		sensor_conf->trip_data.trip_val[i] =
			pdata->threshold + pdata->trigger_levels[i];
		sensor_conf->trip_data.trip_type[i] =
					pdata->trigger_type[i];
	}

	sensor_conf->trip_data.trigger_falling = pdata->threshold_falling;

	sensor_conf->cooling_data.freq_clip_count = pdata->freq_tab_count;
	for (i = 0; i < pdata->freq_tab_count; i++) {
		sensor_conf->cooling_data.freq_data[i].freq_clip_max =
					pdata->freq_tab[i].freq_clip_max;
		sensor_conf->cooling_data.freq_data[i].temp_level =
					pdata->freq_tab[i].temp_level;
	}
	sensor_conf->dev = &pdev->dev;
	/* Register the sensor with thermal management interface */
	ret = exynos_register_thermal(sensor_conf);
	if (ret) {
		dev_err(&pdev->dev, "Failed to register thermal interface\n");
		goto err_clk;
	}
	data->reg_conf = sensor_conf;

	ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
		IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
	if (ret) {
		dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
		goto err_clk;
	}

	return 0;
err_clk:
	clk_unprepare(data->clk);
	return ret;
}

static int exynos_tmu_remove(struct platform_device *pdev)
{
	struct exynos_tmu_data *data = platform_get_drvdata(pdev);

	exynos_tmu_control(pdev, false);

	exynos_unregister_thermal(data->reg_conf);

	clk_unprepare(data->clk);

	if (!IS_ERR(data->regulator))
		regulator_disable(data->regulator);

	return 0;
}

#ifdef CONFIG_PM_SLEEP
static int exynos_tmu_suspend(struct device *dev)
{
	exynos_tmu_control(to_platform_device(dev), false);

	return 0;
}

static int exynos_tmu_resume(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);

	exynos_tmu_initialize(pdev);
	exynos_tmu_control(pdev, true);

	return 0;
}

static SIMPLE_DEV_PM_OPS(exynos_tmu_pm,
			 exynos_tmu_suspend, exynos_tmu_resume);
#define EXYNOS_TMU_PM	(&exynos_tmu_pm)
#else
#define EXYNOS_TMU_PM	NULL
#endif

static struct platform_driver exynos_tmu_driver = {
	.driver = {
		.name   = "exynos-tmu",
		.owner  = THIS_MODULE,
		.pm     = EXYNOS_TMU_PM,
		.of_match_table = of_match_ptr(exynos_tmu_match),
	},
	.probe = exynos_tmu_probe,
	.remove	= exynos_tmu_remove,
};

module_platform_driver(exynos_tmu_driver);

MODULE_DESCRIPTION("EXYNOS TMU Driver");
MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:exynos-tmu");
OpenPOWER on IntegriCloud