path: root/arch/mips/include/asm/mach-au1x00/gpio-au1000.h

/*
 * GPIO functions for Au1000, Au1500, Au1100, Au1550, Au1200
 *
 * Copyright (c) 2009 Manuel Lauss.
 *
 * Licensed under the terms outlined in the file COPYING.
 */

#ifndef _ALCHEMY_GPIO_AU1000_H_
#define _ALCHEMY_GPIO_AU1000_H_

#include <asm/mach-au1x00/au1000.h>

/* The default GPIO numberspace as documented in the Alchemy manuals.
 * GPIO0-31 from GPIO1 block,   GPIO200-215 from GPIO2 block.
 */
#define ALCHEMY_GPIO1_BASE	0
#define ALCHEMY_GPIO2_BASE	200

#define ALCHEMY_GPIO1_NUM	32
#define ALCHEMY_GPIO2_NUM	16
#define ALCHEMY_GPIO1_MAX 	(ALCHEMY_GPIO1_BASE + ALCHEMY_GPIO1_NUM - 1)
#define ALCHEMY_GPIO2_MAX	(ALCHEMY_GPIO2_BASE + ALCHEMY_GPIO2_NUM - 1)

#define MAKE_IRQ(intc, off)	(AU1000_INTC##intc##_INT_BASE + (off))

/* GPIO1 registers within SYS_ area */
#define SYS_TRIOUTRD		0x100
#define SYS_TRIOUTCLR		0x100
#define SYS_OUTPUTRD		0x108
#define SYS_OUTPUTSET		0x108
#define SYS_OUTPUTCLR		0x10C
#define SYS_PINSTATERD		0x110
#define SYS_PININPUTEN		0x110

/* register offsets within GPIO2 block */
#define GPIO2_DIR		0x00
#define GPIO2_OUTPUT		0x08
#define GPIO2_PINSTATE		0x0C
#define GPIO2_INTENABLE		0x10
#define GPIO2_ENABLE		0x14

struct gpio;

static inline int au1000_gpio1_to_irq(int gpio)
{
	return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE);
}

static inline int au1000_gpio2_to_irq(int gpio)
{
	return -ENXIO;
}

static inline int au1000_irq_to_gpio(int irq)
{
	if ((irq >= AU1000_GPIO0_INT) && (irq <= AU1000_GPIO31_INT))
		return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO0_INT) + 0;

	return -ENXIO;
}

static inline int au1500_gpio1_to_irq(int gpio)
{
	gpio -= ALCHEMY_GPIO1_BASE;

	switch (gpio) {
	case 0 ... 15:
	case 20:
	case 23 ... 28:	return MAKE_IRQ(1, gpio);
	}

	return -ENXIO;
}

static inline int au1500_gpio2_to_irq(int gpio)
{
	gpio -= ALCHEMY_GPIO2_BASE;

	switch (gpio) {
	case 0 ... 3:	return MAKE_IRQ(1, 16 + gpio - 0);
	case 4 ... 5:	return MAKE_IRQ(1, 21 + gpio - 4);
	case 6 ... 7:	return MAKE_IRQ(1, 29 + gpio - 6);
	}

	return -ENXIO;
}

static inline int au1500_irq_to_gpio(int irq)
{
	switch (irq) {
	case AU1500_GPIO0_INT ... AU1500_GPIO15_INT:
	case AU1500_GPIO20_INT:
	case AU1500_GPIO23_INT ... AU1500_GPIO28_INT:
		return ALCHEMY_GPIO1_BASE + (irq - AU1500_GPIO0_INT) + 0;
	case AU1500_GPIO200_INT ... AU1500_GPIO203_INT:
		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO200_INT) + 0;
	case AU1500_GPIO204_INT ... AU1500_GPIO205_INT:
		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO204_INT) + 4;
	case AU1500_GPIO206_INT ... AU1500_GPIO207_INT:
		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO206_INT) + 6;
	case AU1500_GPIO208_215_INT:
		return ALCHEMY_GPIO2_BASE + 8;
	}

	return -ENXIO;
}

static inline int au1100_gpio1_to_irq(int gpio)
{
	return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE);
}

static inline int au1100_gpio2_to_irq(int gpio)
{
	gpio -= ALCHEMY_GPIO2_BASE;

	if ((gpio >= 8) && (gpio <= 15))
		return MAKE_IRQ(0, 29);		/* shared GPIO208_215 */

	return -ENXIO;
}

static inline int au1100_irq_to_gpio(int irq)
{
	switch (irq) {
	case AU1100_GPIO0_INT ... AU1100_GPIO31_INT:
		return ALCHEMY_GPIO1_BASE + (irq - AU1100_GPIO0_INT) + 0;
	case AU1100_GPIO208_215_INT:
		return ALCHEMY_GPIO2_BASE + 8;
	}

	return -ENXIO;
}

static inline int au1550_gpio1_to_irq(int gpio)
{
	gpio -= ALCHEMY_GPIO1_BASE;

	switch (gpio) {
	case 0 ... 15:
	case 20 ... 28:	return MAKE_IRQ(1, gpio);
	case 16 ... 17:	return MAKE_IRQ(1, 18 + gpio - 16);
	}

	return -ENXIO;
}

static inline int au1550_gpio2_to_irq(int gpio)
{
	gpio -= ALCHEMY_GPIO2_BASE;

	switch (gpio) {
	case 0:		return MAKE_IRQ(1, 16);
	case 1 ... 5:	return MAKE_IRQ(1, 17);	/* shared GPIO201_205 */
	case 6 ... 7:	return MAKE_IRQ(1, 29 + gpio - 6);
	case 8 ... 15:	return MAKE_IRQ(1, 31);	/* shared GPIO208_215 */
	}

	return -ENXIO;
}

static inline int au1550_irq_to_gpio(int irq)
{
	switch (irq) {
	case AU1550_GPIO0_INT ... AU1550_GPIO15_INT:
		return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO0_INT) + 0;
	case AU1550_GPIO200_INT:
	case AU1550_GPIO201_205_INT:
		return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO200_INT) + 0;
	case AU1550_GPIO16_INT ... AU1550_GPIO28_INT:
		return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO16_INT) + 16;
	case AU1550_GPIO206_INT ... AU1550_GPIO208_215_INT:
		return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO206_INT) + 6;
	}

	return -ENXIO;
}

static inline int au1200_gpio1_to_irq(int gpio)
{
	return MAKE_IRQ(1, gpio - ALCHEMY_GPIO1_BASE);
}

static inline int au1200_gpio2_to_irq(int gpio)
{
	gpio -= ALCHEMY_GPIO2_BASE;

	switch (gpio) {
	case 0 ... 2:	return MAKE_IRQ(0, 5 + gpio - 0);
	case 3:		return MAKE_IRQ(0, 22);
	case 4 ... 7:	return MAKE_IRQ(0, 24 + gpio - 4);
	case 8 ... 15:	return MAKE_IRQ(0, 28);	/* shared GPIO208_215 */
	}

	return -ENXIO;
}

static inline int au1200_irq_to_gpio(int irq)
{
	switch (irq) {
	case AU1200_GPIO0_INT ... AU1200_GPIO31_INT:
		return ALCHEMY_GPIO1_BASE + (irq - AU1200_GPIO0_INT) + 0;
	case AU1200_GPIO200_INT ... AU1200_GPIO202_INT:
		return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO200_INT) + 0;
	case AU1200_GPIO203_INT:
		return ALCHEMY_GPIO2_BASE + 3;
	case AU1200_GPIO204_INT ... AU1200_GPIO208_215_INT:
		return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO204_INT) + 4;
	}

	return -ENXIO;
}

/*
 * GPIO1 block macros for common linux gpio functions.
 */
static inline void alchemy_gpio1_set_value(int gpio, int v)
{
	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
	unsigned long r = v ? SYS_OUTPUTSET : SYS_OUTPUTCLR;
	__raw_writel(mask, base + r);
	wmb();
}

static inline int alchemy_gpio1_get_value(int gpio)
{
	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
	return __raw_readl(base + SYS_PINSTATERD) & mask;
}

static inline int alchemy_gpio1_direction_input(int gpio)
{
	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
	__raw_writel(mask, base + SYS_TRIOUTCLR);
	wmb();
	return 0;
}

static inline int alchemy_gpio1_direction_output(int gpio, int v)
{
	/* hardware switches to "output" mode when one of the two
	 * "set_value" registers is accessed.
	 */
	alchemy_gpio1_set_value(gpio, v);
	return 0;
}

static inline int alchemy_gpio1_is_valid(int gpio)
{
	return ((gpio >= ALCHEMY_GPIO1_BASE) && (gpio <= ALCHEMY_GPIO1_MAX));
}

static inline int alchemy_gpio1_to_irq(int gpio)
{
	switch (alchemy_get_cputype()) {
	case ALCHEMY_CPU_AU1000:
		return au1000_gpio1_to_irq(gpio);
	case ALCHEMY_CPU_AU1100:
		return au1100_gpio1_to_irq(gpio);
	case ALCHEMY_CPU_AU1500:
		return au1500_gpio1_to_irq(gpio);
	case ALCHEMY_CPU_AU1550:
		return au1550_gpio1_to_irq(gpio);
	case ALCHEMY_CPU_AU1200:
		return au1200_gpio1_to_irq(gpio);
	}
	return -ENXIO;
}

/*
 * GPIO2 block macros for common linux GPIO functions. The 'gpio'
 * parameter must be in range of ALCHEMY_GPIO2_BASE..ALCHEMY_GPIO2_MAX.
 */
static inline void __alchemy_gpio2_mod_dir(int gpio, int to_out)
{
	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO2_BASE);
	unsigned long d = __raw_readl(base + GPIO2_DIR);

	if (to_out)
		d |= mask;
	else
		d &= ~mask;
	__raw_writel(d, base + GPIO2_DIR);
	wmb();
}

static inline void alchemy_gpio2_set_value(int gpio, int v)
{
	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
	unsigned long mask;
	mask = ((v) ? 0x00010001 : 0x00010000) << (gpio - ALCHEMY_GPIO2_BASE);
	__raw_writel(mask, base + GPIO2_OUTPUT);
	wmb();
}

static inline int alchemy_gpio2_get_value(int gpio)
{
	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
	return __raw_readl(base + GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE));
}

static inline int alchemy_gpio2_direction_input(int gpio)
{
	unsigned long flags;
	local_irq_save(flags);
	__alchemy_gpio2_mod_dir(gpio, 0);
	local_irq_restore(flags);
	return 0;
}

static inline int alchemy_gpio2_direction_output(int gpio, int v)
{
	unsigned long flags;
	alchemy_gpio2_set_value(gpio, v);
	local_irq_save(flags);
	__alchemy_gpio2_mod_dir(gpio, 1);
	local_irq_restore(flags);
	return 0;
}

static inline int alchemy_gpio2_is_valid(int gpio)
{
	return ((gpio >= ALCHEMY_GPIO2_BASE) && (gpio <= ALCHEMY_GPIO2_MAX));
}

static inline int alchemy_gpio2_to_irq(int gpio)
{
	switch (alchemy_get_cputype()) {
	case ALCHEMY_CPU_AU1000:
		return au1000_gpio2_to_irq(gpio);
	case ALCHEMY_CPU_AU1100:
		return au1100_gpio2_to_irq(gpio);
	case ALCHEMY_CPU_AU1500:
		return au1500_gpio2_to_irq(gpio);
	case ALCHEMY_CPU_AU1550:
		return au1550_gpio2_to_irq(gpio);
	case ALCHEMY_CPU_AU1200:
		return au1200_gpio2_to_irq(gpio);
	}
	return -ENXIO;
}

/**********************************************************************/

/* GPIO2 shared interrupts and control */

static inline void __alchemy_gpio2_mod_int(int gpio2, int en)
{
	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
	unsigned long r = __raw_readl(base + GPIO2_INTENABLE);
	if (en)
		r |= 1 << gpio2;
	else
		r &= ~(1 << gpio2);
	__raw_writel(r, base + GPIO2_INTENABLE);
	wmb();
}

/**
 * alchemy_gpio2_enable_int - Enable a GPIO2 pins' shared irq contribution.
 * @gpio2:	The GPIO2 pin to activate (200...215).
 *
 * GPIO208-215 have one shared interrupt line to the INTC.  They are
 * and'ed with a per-pin enable bit and finally or'ed together to form
 * a single irq request (useful for active-high sources).
 * With this function, a pins' individual contribution to the int request
 * can be enabled.  As with all other GPIO-based interrupts, the INTC
 * must be programmed to accept the GPIO208_215 interrupt as well.
 *
 * NOTE: Calling this macro is only necessary for GPIO208-215; all other
 * GPIO2-based interrupts have their own request to the INTC.  Please
 * consult your Alchemy databook for more information!
 *
 * NOTE: On the Au1550, GPIOs 201-205 also have a shared interrupt request
 * line to the INTC, GPIO201_205.  This function can be used for those
 * as well.
 *
 * NOTE: 'gpio2' parameter must be in range of the GPIO2 numberspace
 * (200-215 by default). No sanity checks are made,
 */
static inline void alchemy_gpio2_enable_int(int gpio2)
{
	unsigned long flags;

	gpio2 -= ALCHEMY_GPIO2_BASE;

	/* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */
	switch (alchemy_get_cputype()) {
	case ALCHEMY_CPU_AU1100:
	case ALCHEMY_CPU_AU1500:
		gpio2 -= 8;
	}

	local_irq_save(flags);
	__alchemy_gpio2_mod_int(gpio2, 1);
	local_irq_restore(flags);
}

/**
 * alchemy_gpio2_disable_int - Disable a GPIO2 pins' shared irq contribution.
 * @gpio2:	The GPIO2 pin to activate (200...215).
 *
 * see function alchemy_gpio2_enable_int() for more information.
 */
static inline void alchemy_gpio2_disable_int(int gpio2)
{
	unsigned long flags;

	gpio2 -= ALCHEMY_GPIO2_BASE;

	/* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */
	switch (alchemy_get_cputype()) {
	case ALCHEMY_CPU_AU1100:
	case ALCHEMY_CPU_AU1500:
		gpio2 -= 8;
	}

	local_irq_save(flags);
	__alchemy_gpio2_mod_int(gpio2, 0);
	local_irq_restore(flags);
}

/**
 * alchemy_gpio2_enable -  Activate GPIO2 block.
 *
 * The GPIO2 block must be enabled excplicitly to work.  On systems
 * where this isn't done by the bootloader, this macro can be used.
 */
static inline void alchemy_gpio2_enable(void)
{
	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
	__raw_writel(3, base + GPIO2_ENABLE);	/* reset, clock enabled */
	wmb();
	__raw_writel(1, base + GPIO2_ENABLE);	/* clock enabled */
	wmb();
}

/**
 * alchemy_gpio2_disable - disable GPIO2 block.
 *
 * Disable and put GPIO2 block in low-power mode.
 */
static inline void alchemy_gpio2_disable(void)
{
	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
	__raw_writel(2, base + GPIO2_ENABLE);	/* reset, clock disabled */
	wmb();
}

/**********************************************************************/

/* wrappers for on-chip gpios; can be used before gpio chips have been
 * registered with gpiolib.
 */
static inline int alchemy_gpio_direction_input(int gpio)
{
	return (gpio >= ALCHEMY_GPIO2_BASE) ?
		alchemy_gpio2_direction_input(gpio) :
		alchemy_gpio1_direction_input(gpio);
}

static inline int alchemy_gpio_direction_output(int gpio, int v)
{
	return (gpio >= ALCHEMY_GPIO2_BASE) ?
		alchemy_gpio2_direction_output(gpio, v) :
		alchemy_gpio1_direction_output(gpio, v);
}

static inline int alchemy_gpio_get_value(int gpio)
{
	return (gpio >= ALCHEMY_GPIO2_BASE) ?
		alchemy_gpio2_get_value(gpio) :
		alchemy_gpio1_get_value(gpio);
}

static inline void alchemy_gpio_set_value(int gpio, int v)
{
	if (gpio >= ALCHEMY_GPIO2_BASE)
		alchemy_gpio2_set_value(gpio, v);
	else
		alchemy_gpio1_set_value(gpio, v);
}

static inline int alchemy_gpio_is_valid(int gpio)
{
	return (gpio >= ALCHEMY_GPIO2_BASE) ?
		alchemy_gpio2_is_valid(gpio) :
		alchemy_gpio1_is_valid(gpio);
}

static inline int alchemy_gpio_cansleep(int gpio)
{
	return 0;	/* Alchemy never gets tired */
}

static inline int alchemy_gpio_to_irq(int gpio)
{
	return (gpio >= ALCHEMY_GPIO2_BASE) ?
		alchemy_gpio2_to_irq(gpio) :
		alchemy_gpio1_to_irq(gpio);
}

static inline int alchemy_irq_to_gpio(int irq)
{
	switch (alchemy_get_cputype()) {
	case ALCHEMY_CPU_AU1000:
		return au1000_irq_to_gpio(irq);
	case ALCHEMY_CPU_AU1100:
		return au1100_irq_to_gpio(irq);
	case ALCHEMY_CPU_AU1500:
		return au1500_irq_to_gpio(irq);
	case ALCHEMY_CPU_AU1550:
		return au1550_irq_to_gpio(irq);
	case ALCHEMY_CPU_AU1200:
		return au1200_irq_to_gpio(irq);
	}
	return -ENXIO;
}

/**********************************************************************/

/* Linux gpio framework integration.
 *
 * 4 use cases of Au1000-Au1200 GPIOS:
 *(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
 *	Board must register gpiochips.
 *(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
 *	2 (1 for Au1000) gpio_chips are registered.
 *
 *(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
 *	the boards' gpio.h must provide	the linux gpio wrapper functions,
 *
 *(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
 *	inlinable gpio functions are provided which enable access to the
 *	Au1000 gpios only by using the numbers straight out of the data-
 *	sheets.

 * Cases 1 and 3 are intended for boards which want to provide their own
 * GPIO namespace and -operations (i.e. for example you have 8 GPIOs
 * which are in part provided by spare Au1000 GPIO pins and in part by
 * an external FPGA but you still want them to be accssible in linux
 * as gpio0-7. The board can of course use the alchemy_gpioX_* functions
 * as required).
 */

#ifndef CONFIG_GPIOLIB

#ifdef CONFIG_ALCHEMY_GPIOINT_AU1000

#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT	/* case (4) */

static inline int gpio_direction_input(int gpio)
{
	return alchemy_gpio_direction_input(gpio);
}

static inline int gpio_direction_output(int gpio, int v)
{
	return alchemy_gpio_direction_output(gpio, v);
}

static inline int gpio_get_value(int gpio)
{
	return alchemy_gpio_get_value(gpio);
}

static inline void gpio_set_value(int gpio, int v)
{
	alchemy_gpio_set_value(gpio, v);
}

static inline int gpio_get_value_cansleep(unsigned gpio)
{
	return gpio_get_value(gpio);
}

static inline void gpio_set_value_cansleep(unsigned gpio, int value)
{
	gpio_set_value(gpio, value);
}

static inline int gpio_is_valid(int gpio)
{
	return alchemy_gpio_is_valid(gpio);
}

static inline int gpio_cansleep(int gpio)
{
	return alchemy_gpio_cansleep(gpio);
}

static inline int gpio_to_irq(int gpio)
{
	return alchemy_gpio_to_irq(gpio);
}

static inline int irq_to_gpio(int irq)
{
	return alchemy_irq_to_gpio(irq);
}

static inline int gpio_request(unsigned gpio, const char *label)
{
	return 0;
}

static inline int gpio_request_one(unsigned gpio,
					unsigned long flags, const char *label)
{
	return 0;
}

static inline int gpio_request_array(struct gpio *array, size_t num)
{
	return 0;
}

static inline void gpio_free(unsigned gpio)
{
}

static inline void gpio_free_array(struct gpio *array, size_t num)
{
}

static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
{
	return -ENOSYS;
}

static inline int gpio_export(unsigned gpio, bool direction_may_change)
{
	return -ENOSYS;
}

static inline int gpio_export_link(struct device *dev, const char *name,
				   unsigned gpio)
{
	return -ENOSYS;
}

static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
{
	return -ENOSYS;
}

static inline void gpio_unexport(unsigned gpio)
{
}

#endif	/* !CONFIG_ALCHEMY_GPIO_INDIRECT */

#endif	/* CONFIG_ALCHEMY_GPIOINT_AU1000 */

#endif	/* !CONFIG_GPIOLIB */

#endif /* _ALCHEMY_GPIO_AU1000_H_ */