path: root/arch/arm/boot/dts/sama5d3.dtsi

/*
 * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
 *                applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC
 *
 *  Copyright (C) 2013 Atmel,
 *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
 *
 * Licensed under GPLv2 or later.
 */

/include/ "skeleton.dtsi"

/ {
	model = "Atmel SAMA5D3 family SoC";
	compatible = "atmel,sama5d3", "atmel,sama5";
	interrupt-parent = <&aic>;

	aliases {
		serial0 = &dbgu;
		serial1 = &usart0;
		serial2 = &usart1;
		serial3 = &usart2;
		serial4 = &usart3;
		gpio0 = &pioA;
		gpio1 = &pioB;
		gpio2 = &pioC;
		gpio3 = &pioD;
		gpio4 = &pioE;
		tcb0 = &tcb0;
		tcb1 = &tcb1;
		i2c0 = &i2c0;
		i2c1 = &i2c1;
		i2c2 = &i2c2;
		ssc0 = &ssc0;
		ssc1 = &ssc1;
	};
	cpus {
		cpu@0 {
			compatible = "arm,cortex-a5";
		};
	};

	memory {
		reg = <0x20000000 0x8000000>;
	};

	ahb {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		apb {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;

			mmc0: mmc@f0000000 {
				compatible = "atmel,hsmci";
				reg = <0xf0000000 0x600>;
				interrupts = <21 4 0>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
				status = "disabled";
				#address-cells = <1>;
				#size-cells = <0>;
			};

			spi0: spi@f0004000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "atmel,at91sam9x5-spi";
				reg = <0xf0004000 0x100>;
				interrupts = <24 4 3>;
				cs-gpios = <&pioD 13 0
					    &pioD 14 0 /* conflicts with SCK0 and CANRX0 */
					    &pioD 15 0 /* conflicts with CTS0 and CANTX0 */
					    &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */
					   >;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_spi0>;
				status = "disabled";
			};

			ssc0: ssc@f0008000 {
				compatible = "atmel,at91sam9g45-ssc";
				reg = <0xf0008000 0x4000>;
				interrupts = <38 4 4>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
				status = "disabled";
			};

			can0: can@f000c000 {
				compatible = "atmel,at91sam9x5-can";
				reg = <0xf000c000 0x300>;
				interrupts = <40 4 3>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_can0_rx_tx>;
				status = "disabled";
			};

			tcb0: timer@f0010000 {
				compatible = "atmel,at91sam9x5-tcb";
				reg = <0xf0010000 0x100>;
				interrupts = <26 4 0>;
			};

			i2c0: i2c@f0014000 {
				compatible = "atmel,at91sam9x5-i2c";
				reg = <0xf0014000 0x4000>;
				interrupts = <18 4 6>;
				dmas = <&dma0 2 7>,
				       <&dma0 2 8>;
				dma-names = "tx", "rx";
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_i2c0>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			i2c1: i2c@f0018000 {
				compatible = "atmel,at91sam9x5-i2c";
				reg = <0xf0018000 0x4000>;
				interrupts = <19 4 6>;
				dmas = <&dma0 2 9>,
				       <&dma0 2 10>;
				dma-names = "tx", "rx";
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_i2c1>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			usart0: serial@f001c000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xf001c000 0x100>;
				interrupts = <12 4 5>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usart0>;
				status = "disabled";
			};

			usart1: serial@f0020000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xf0020000 0x100>;
				interrupts = <13 4 5>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usart1>;
				status = "disabled";
			};

			macb0: ethernet@f0028000 {
				compatible = "cnds,pc302-gem", "cdns,gem";
				reg = <0xf0028000 0x100>;
				interrupts = <34 4 3>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
				status = "disabled";
			};

			isi: isi@f0034000 {
				compatible = "atmel,at91sam9g45-isi";
				reg = <0xf0034000 0x4000>;
				interrupts = <37 4 5>;
				status = "disabled";
			};

			mmc1: mmc@f8000000 {
				compatible = "atmel,hsmci";
				reg = <0xf8000000 0x600>;
				interrupts = <22 4 0>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
				status = "disabled";
				#address-cells = <1>;
				#size-cells = <0>;
			};

			mmc2: mmc@f8004000 {
				compatible = "atmel,hsmci";
				reg = <0xf8004000 0x600>;
				interrupts = <23 4 0>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
				status = "disabled";
				#address-cells = <1>;
				#size-cells = <0>;
			};

			spi1: spi@f8008000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "atmel,at91sam9x5-spi";
				reg = <0xf8008000 0x100>;
				interrupts = <25 4 3>;
				cs-gpios = <&pioC 25 0
					    &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */
					    &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */
					    &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */
					   >;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_spi1>;
				status = "disabled";
			};

			ssc1: ssc@f800c000 {
				compatible = "atmel,at91sam9g45-ssc";
				reg = <0xf800c000 0x4000>;
				interrupts = <39 4 4>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
				status = "disabled";
			};

			can1: can@f8010000 {
				compatible = "atmel,at91sam9x5-can";
				reg = <0xf8010000 0x300>;
				interrupts = <41 4 3>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_can1_rx_tx>;
			};

			tcb1: timer@f8014000 {
				compatible = "atmel,at91sam9x5-tcb";
				reg = <0xf8014000 0x100>;
				interrupts = <27 4 0>;
			};

			adc0: adc@f8018000 {
				compatible = "atmel,at91sam9260-adc";
				reg = <0xf8018000 0x100>;
				interrupts = <29 4 5>;
				pinctrl-names = "default";
				pinctrl-0 = <
					&pinctrl_adc0_adtrg
					&pinctrl_adc0_ad0
					&pinctrl_adc0_ad1
					&pinctrl_adc0_ad2
					&pinctrl_adc0_ad3
					&pinctrl_adc0_ad4
					&pinctrl_adc0_ad5
					&pinctrl_adc0_ad6
					&pinctrl_adc0_ad7
					&pinctrl_adc0_ad8
					&pinctrl_adc0_ad9
					&pinctrl_adc0_ad10
					&pinctrl_adc0_ad11
					>;
				atmel,adc-channel-base = <0x50>;
				atmel,adc-channels-used = <0xfff>;
				atmel,adc-drdy-mask = <0x1000000>;
				atmel,adc-num-channels = <12>;
				atmel,adc-startup-time = <40>;
				atmel,adc-status-register = <0x30>;
				atmel,adc-trigger-register = <0xc0>;
				atmel,adc-use-external;
				atmel,adc-vref = <3000>;
				atmel,adc-res = <10 12>;
				atmel,adc-res-names = "lowres", "highres";
				status = "disabled";

				trigger@0 {
					trigger-name = "external-rising";
					trigger-value = <0x1>;
					trigger-external;
				};
				trigger@1 {
					trigger-name = "external-falling";
					trigger-value = <0x2>;
					trigger-external;
				};
				trigger@2 {
					trigger-name = "external-any";
					trigger-value = <0x3>;
					trigger-external;
				};
				trigger@3 {
					trigger-name = "continuous";
					trigger-value = <0x6>;
				};
			};

			tsadcc: tsadcc@f8018000 {
				compatible = "atmel,at91sam9x5-tsadcc";
				reg = <0xf8018000 0x4000>;
				interrupts = <29 4 5>;
				atmel,tsadcc_clock = <300000>;
				atmel,filtering_average = <0x03>;
				atmel,pendet_debounce = <0x08>;
				atmel,pendet_sensitivity = <0x02>;
				atmel,ts_sample_hold_time = <0x0a>;
				status = "disabled";
			};

			i2c2: i2c@f801c000 {
				compatible = "atmel,at91sam9x5-i2c";
				reg = <0xf801c000 0x4000>;
				interrupts = <20 4 6>;
				dmas = <&dma1 2 11>,
				       <&dma1 2 12>;
				dma-names = "tx", "rx";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			usart2: serial@f8020000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xf8020000 0x100>;
				interrupts = <14 4 5>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usart2>;
				status = "disabled";
			};

			usart3: serial@f8024000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xf8024000 0x100>;
				interrupts = <15 4 5>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usart3>;
				status = "disabled";
			};

			macb1: ethernet@f802c000 {
				compatible = "cdns,at32ap7000-macb", "cdns,macb";
				reg = <0xf802c000 0x100>;
				interrupts = <35 4 3>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_macb1_rmii>;
				status = "disabled";
			};

			sha@f8034000 {
				compatible = "atmel,sam9g46-sha";
				reg = <0xf8034000 0x100>;
				interrupts = <42 4 0>;
			};

			aes@f8038000 {
				compatible = "atmel,sam9g46-aes";
				reg = <0xf8038000 0x100>;
				interrupts = <43 4 0>;
			};

			tdes@f803c000 {
				compatible = "atmel,sam9g46-tdes";
				reg = <0xf803c000 0x100>;
				interrupts = <44 4 0>;
			};

			dma0: dma-controller@ffffe600 {
				compatible = "atmel,at91sam9g45-dma";
				reg = <0xffffe600 0x200>;
				interrupts = <30 4 0>;
				#dma-cells = <2>;
			};

			dma1: dma-controller@ffffe800 {
				compatible = "atmel,at91sam9g45-dma";
				reg = <0xffffe800 0x200>;
				interrupts = <31 4 0>;
				#dma-cells = <2>;
			};

			ramc0: ramc@ffffea00 {
				compatible = "atmel,at91sam9g45-ddramc";
				reg = <0xffffea00 0x200>;
			};

			dbgu: serial@ffffee00 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xffffee00 0x200>;
				interrupts = <2 4 7>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_dbgu>;
				status = "disabled";
			};

			aic: interrupt-controller@fffff000 {
				#interrupt-cells = <3>;
				compatible = "atmel,sama5d3-aic";
				interrupt-controller;
				reg = <0xfffff000 0x200>;
				atmel,external-irqs = <47>;
			};

			pinctrl@fffff200 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
				ranges = <0xfffff200 0xfffff200 0xa00>;
				atmel,mux-mask = <
					/*   A          B          C  */
					0xffffffff 0xc0fc0000 0xc0ff0000	/* pioA */
					0xffffffff 0x0ff8ffff 0x00000000	/* pioB */
					0xffffffff 0xbc00f1ff 0x7c00fc00	/* pioC */
					0xffffffff 0xc001c0e0 0x0001c1e0	/* pioD */
					0xffffffff 0xbf9f8000 0x18000000	/* pioE */
					>;

				/* shared pinctrl settings */
				adc0 {
					pinctrl_adc0_adtrg: adc0_adtrg {
						atmel,pins =
							<3 19 0x1 0x0>;	/* PD19 periph A ADTRG */
					};
					pinctrl_adc0_ad0: adc0_ad0 {
						atmel,pins =
							<3 20 0x1 0x0>;	/* PD20 periph A AD0 */
					};
					pinctrl_adc0_ad1: adc0_ad1 {
						atmel,pins =
							<3 21 0x1 0x0>;	/* PD21 periph A AD1 */
					};
					pinctrl_adc0_ad2: adc0_ad2 {
						atmel,pins =
							<3 22 0x1 0x0>;	/* PD22 periph A AD2 */
					};
					pinctrl_adc0_ad3: adc0_ad3 {
						atmel,pins =
							<3 23 0x1 0x0>;	/* PD23 periph A AD3 */
					};
					pinctrl_adc0_ad4: adc0_ad4 {
						atmel,pins =
							<3 24 0x1 0x0>;	/* PD24 periph A AD4 */
					};
					pinctrl_adc0_ad5: adc0_ad5 {
						atmel,pins =
							<3 25 0x1 0x0>;	/* PD25 periph A AD5 */
					};
					pinctrl_adc0_ad6: adc0_ad6 {
						atmel,pins =
							<3 26 0x1 0x0>;	/* PD26 periph A AD6 */
					};
					pinctrl_adc0_ad7: adc0_ad7 {
						atmel,pins =
							<3 27 0x1 0x0>;	/* PD27 periph A AD7 */
					};
					pinctrl_adc0_ad8: adc0_ad8 {
						atmel,pins =
							<3 28 0x1 0x0>;	/* PD28 periph A AD8 */
					};
					pinctrl_adc0_ad9: adc0_ad9 {
						atmel,pins =
							<3 29 0x1 0x0>;	/* PD29 periph A AD9 */
					};
					pinctrl_adc0_ad10: adc0_ad10 {
						atmel,pins =
							<3 30 0x1 0x0>;	/* PD30 periph A AD10, conflicts with PCK0 */
					};
					pinctrl_adc0_ad11: adc0_ad11 {
						atmel,pins =
							<3 31 0x1 0x0>;	/* PD31 periph A AD11, conflicts with PCK1 */
					};
				};

				can0 {
					pinctrl_can0_rx_tx: can0_rx_tx {
						atmel,pins =
							<3 14 0x3 0x0	/* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
							 3 15 0x3 0x0>;	/* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
					};
				};

				can1 {
					pinctrl_can1_rx_tx: can1_rx_tx {
						atmel,pins =
							<1 14 0x2 0x0	/* PB14 periph B RX, conflicts with GCRS */
							 1 15 0x2 0x0>;	/* PB15 periph B TX, conflicts with GCOL */
					};
				};

				dbgu {
					pinctrl_dbgu: dbgu-0 {
						atmel,pins =
							<1 30 0x1 0x0	/* PB30 periph A */
							 1 31 0x1 0x1>;	/* PB31 periph A with pullup */
					};
				};

				i2c0 {
					pinctrl_i2c0: i2c0-0 {
						atmel,pins =
							<0 30 0x1 0x0	/* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
							 0 31 0x1 0x0>;	/* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
					};
				};

				i2c1 {
					pinctrl_i2c1: i2c1-0 {
						atmel,pins =
							<2 26 0x2 0x0	/* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
							 2 27 0x2 0x0>;	/* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
					};
				};

				isi {
					pinctrl_isi: isi-0 {
						atmel,pins =
							<0 16 0x3 0x0	/* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
							 0 17 0x3 0x0	/* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
							 0 18 0x3 0x0	/* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */
							 0 19 0x3 0x0	/* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */
							 0 20 0x3 0x0	/* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */
							 0 21 0x3 0x0	/* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */
							 0 22 0x3 0x0	/* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */
							 0 23 0x3 0x0	/* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
							 2 30 0x3 0x0	/* PC30 periph C ISI_PCK, conflicts with UTXD0 */
							 0 31 0x3 0x0	/* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
							 0 30 0x3 0x0	/* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
							 2 29 0x3 0x0	/* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
							 2 28 0x3 0x0>;	/* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
					};
					pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 {
						atmel,pins =
							<3 31 0x2 0x0>;	/* PD31 periph B ISI_MCK */
					};
				};

				lcd {
					pinctrl_lcd: lcd-0 {
						atmel,pins =
							<0 24 0x1 0x0	/* PA24 periph A LCDPWM */
							 0 26 0x1 0x0	/* PA26 periph A LCDVSYNC */
							 0 27 0x1 0x0	/* PA27 periph A LCDHSYNC */
							 0 25 0x1 0x0	/* PA25 periph A LCDDISP */
							 0 29 0x1 0x0	/* PA29 periph A LCDDEN */
							 0 28 0x1 0x0	/* PA28 periph A LCDPCK */
							 0 0 0x1 0x0	/* PA0 periph A LCDD0 pin */
							 0 1 0x1 0x0	/* PA1 periph A LCDD1 pin */
							 0 2 0x1 0x0	/* PA2 periph A LCDD2 pin */
							 0 3 0x1 0x0	/* PA3 periph A LCDD3 pin */
							 0 4 0x1 0x0	/* PA4 periph A LCDD4 pin */
							 0 5 0x1 0x0	/* PA5 periph A LCDD5 pin */
							 0 6 0x1 0x0	/* PA6 periph A LCDD6 pin */
							 0 7 0x1 0x0	/* PA7 periph A LCDD7 pin */
							 0 8 0x1 0x0	/* PA8 periph A LCDD8 pin */
							 0 9 0x1 0x0	/* PA9 periph A LCDD9 pin */
							 0 10 0x1 0x0	/* PA10 periph A LCDD10 pin */
							 0 11 0x1 0x0	/* PA11 periph A LCDD11 pin */
							 0 12 0x1 0x0	/* PA12 periph A LCDD12 pin */
							 0 13 0x1 0x0	/* PA13 periph A LCDD13 pin */
							 0 14 0x1 0x0	/* PA14 periph A LCDD14 pin */
							 0 15 0x1 0x0	/* PA15 periph A LCDD15 pin */
							 2 14 0x3 0x0	/* PC14 periph C LCDD16 pin */
							 2 13 0x3 0x0	/* PC13 periph C LCDD17 pin */
							 2 12 0x3 0x0	/* PC12 periph C LCDD18 pin */
							 2 11 0x3 0x0	/* PC11 periph C LCDD19 pin */
							 2 10 0x3 0x0	/* PC10 periph C LCDD20 pin */
							 2 15 0x3 0x0	/* PC15 periph C LCDD21 pin */
							 4 27 0x3 0x0	/* PE27 periph C LCDD22 pin */
							 4 28 0x3 0x0>;	/* PE28 periph C LCDD23 pin */
					};
				};

				macb0 {
					pinctrl_macb0_data_rgmii: macb0_data_rgmii {
						atmel,pins =
							<1 0 0x1 0x0	/* PB0 periph A GTX0, conflicts with PWMH0 */
							 1 1 0x1 0x0	/* PB1 periph A GTX1, conflicts with PWML0 */
							 1 2 0x1 0x0	/* PB2 periph A GTX2, conflicts with TK1 */
							 1 3 0x1 0x0	/* PB3 periph A GTX3, conflicts with TF1 */
							 1 4 0x1 0x0	/* PB4 periph A GRX0, conflicts with PWMH1 */
							 1 5 0x1 0x0	/* PB5 periph A GRX1, conflicts with PWML1 */
							 1 6 0x1 0x0	/* PB6 periph A GRX2, conflicts with TD1 */
							 1 7 0x1 0x0>;	/* PB7 periph A GRX3, conflicts with RK1 */
					};
					pinctrl_macb0_data_gmii: macb0_data_gmii {
						atmel,pins =
							<1 19 0x2 0x0	/* PB19 periph B GTX4, conflicts with MCI1_CDA */
							 1 20 0x2 0x0	/* PB20 periph B GTX5, conflicts with MCI1_DA0 */
							 1 21 0x2 0x0	/* PB21 periph B GTX6, conflicts with MCI1_DA1 */
							 1 22 0x2 0x0	/* PB22 periph B GTX7, conflicts with MCI1_DA2 */
							 1 23 0x2 0x0	/* PB23 periph B GRX4, conflicts with MCI1_DA3 */
							 1 24 0x2 0x0	/* PB24 periph B GRX5, conflicts with MCI1_CK */
							 1 25 0x2 0x0	/* PB25 periph B GRX6, conflicts with SCK1 */
							 1 26 0x2 0x0>;	/* PB26 periph B GRX7, conflicts with CTS1 */
					};
					pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
						atmel,pins =
							<1 8 0x1 0x0	/* PB8 periph A GTXCK, conflicts with PWMH2 */
							 1 9 0x1 0x0	/* PB9 periph A GTXEN, conflicts with PWML2 */
							 1 11 0x1 0x0	/* PB11 periph A GRXCK, conflicts with RD1 */
							 1 13 0x1 0x0	/* PB13 periph A GRXER, conflicts with PWML3 */
							 1 16 0x1 0x0	/* PB16 periph A GMDC */
							 1 17 0x1 0x0	/* PB17 periph A GMDIO */
							 1 18 0x1 0x0>;	/* PB18 periph A G125CK */
					};
					pinctrl_macb0_signal_gmii: macb0_signal_gmii {
						atmel,pins =
							<1 9 0x1 0x0	/* PB9 periph A GTXEN, conflicts with PWML2 */
							 1 10 0x1 0x0	/* PB10 periph A GTXER, conflicts with RF1 */
							 1 11 0x1 0x0	/* PB11 periph A GRXCK, conflicts with RD1 */
							 1 12 0x1 0x0	/* PB12 periph A GRXDV, conflicts with PWMH3 */
							 1 13 0x1 0x0	/* PB13 periph A GRXER, conflicts with PWML3 */
							 1 14 0x1 0x0	/* PB14 periph A GCRS, conflicts with CANRX1 */
							 1 15 0x1 0x0	/* PB15 periph A GCOL, conflicts with CANTX1 */
							 1 16 0x1 0x0	/* PB16 periph A GMDC */
							 1 17 0x1 0x0	/* PB17 periph A GMDIO */
							 1 27 0x2 0x0>;	/* PB27 periph B G125CKO */
					};

				};

				macb1 {
					pinctrl_macb1_rmii: macb1_rmii-0 {
						atmel,pins =
							<2 0 0x1 0x0	/* PC0 periph A ETX0, conflicts with TIOA3 */
							 2 1 0x1 0x0	/* PC1 periph A ETX1, conflicts with TIOB3 */
							 2 2 0x1 0x0	/* PC2 periph A ERX0, conflicts with TCLK3 */
							 2 3 0x1 0x0	/* PC3 periph A ERX1, conflicts with TIOA4 */
							 2 4 0x1 0x0	/* PC4 periph A ETXEN, conflicts with TIOB4 */
							 2 5 0x1 0x0	/* PC5 periph A ECRSDV,conflicts with TCLK4 */
							 2 6 0x1 0x0	/* PC6 periph A ERXER, conflicts with TIOA5 */
							 2 7 0x1 0x0	/* PC7 periph A EREFCK, conflicts with TIOB5 */
							 2 8 0x1 0x0	/* PC8 periph A EMDC, conflicts with TCLK5 */
							 2 9 0x1 0x0>;	/* PC9 periph A EMDIO  */
					};
				};

				mmc0 {
					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
						atmel,pins =
							<3 9 0x1 0x0	/* PD9 periph A MCI0_CK */
							 3 0 0x1 0x1	/* PD0 periph A MCI0_CDA with pullup */
							 3 1 0x1 0x1>;	/* PD1 periph A MCI0_DA0 with pullup */
					};
					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
						atmel,pins =
							<3 2 0x1 0x1	/* PD2 periph A MCI0_DA1 with pullup */
							 3 3 0x1 0x1	/* PD3 periph A MCI0_DA2 with pullup */
							 3 4 0x1 0x1>;	/* PD4 periph A MCI0_DA3 with pullup */
					};
					pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
						atmel,pins =
							<3 5 0x1 0x1	/* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
							 3 6 0x1 0x1	/* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
							 3 7 0x1 0x1	/* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */
							 3 8 0x1 0x1>;	/* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
					};
				};

				mmc1 {
					pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
						atmel,pins =
							<1 24 0x1 0x0	/* PB24 periph A MCI1_CK, conflicts with GRX5 */
							 1 19 0x1 0x1	/* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */
							 1 20 0x1 0x1>;	/* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */
					};
					pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
						atmel,pins =
							<1 21 0x1 0x1	/* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */
							 1 22 0x1 0x1	/* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */
							 1 23 0x1 0x1>;	/* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */
					};
				};

				mmc2 {
					pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
						atmel,pins =
							<2 15 0x1 0x0	/* PC15 periph A MCI2_CK, conflicts with PCK2 */
							 2 10 0x1 0x1	/* PC10 periph A MCI2_CDA with pullup */
							 2 11 0x1 0x1>;	/* PC11 periph A MCI2_DA0 with pullup */
					};
					pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
						atmel,pins =
							<2 12 0x1 0x0	/* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
							 2 13 0x1 0x0	/* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
							 2 14 0x1 0x0>;	/* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
					};
				};

				nand0 {
					pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
						atmel,pins =
							<4 21 0x1 0x1	/* PE21 periph A with pullup */
							 4 22 0x1 0x1>;	/* PE22 periph A with pullup */
					};
				};

				pioA: gpio@fffff200 {
					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
					reg = <0xfffff200 0x100>;
					interrupts = <6 4 1>;
					#gpio-cells = <2>;
					gpio-controller;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				pioB: gpio@fffff400 {
					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
					reg = <0xfffff400 0x100>;
					interrupts = <7 4 1>;
					#gpio-cells = <2>;
					gpio-controller;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				pioC: gpio@fffff600 {
					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
					reg = <0xfffff600 0x100>;
					interrupts = <8 4 1>;
					#gpio-cells = <2>;
					gpio-controller;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				pioD: gpio@fffff800 {
					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
					reg = <0xfffff800 0x100>;
					interrupts = <9 4 1>;
					#gpio-cells = <2>;
					gpio-controller;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				pioE: gpio@fffffa00 {
					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
					reg = <0xfffffa00 0x100>;
					interrupts = <10 4 1>;
					#gpio-cells = <2>;
					gpio-controller;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				spi0 {
					pinctrl_spi0: spi0-0 {
						atmel,pins =
							<3 10 0x1 0x0	/* PD10 periph A SPI0_MISO pin */
							 3 11 0x1 0x0	/* PD11 periph A SPI0_MOSI pin */
							 3 12 0x1 0x0	/* PD12 periph A SPI0_SPCK pin */
							 3 13 0x0 0x0>;	/* PD13 GPIO SPI0_NPCS0 pin */
					};
				};

				spi1 {
					pinctrl_spi1: spi1-0 {
						atmel,pins =
							<2 22 0x1 0x0	/* PC22 periph A SPI1_MISO pin */
							 2 23 0x1 0x0	/* PC23 periph A SPI1_MOSI pin */
							 2 24 0x1 0x0	/* PC24 periph A SPI1_SPCK pin */
							 2 25 0x0 0x0>;	/* PC25 GPIO SPI1_NPCS0 pin */
					};
				};

				ssc0 {
					pinctrl_ssc0_tx: ssc0_tx {
						atmel,pins =
							<2 16 0x1 0x0	/* PC16 periph A TK0 */
							 2 17 0x1 0x0	/* PC17 periph A TF0 */
							 2 18 0x1 0x0>;	/* PC18 periph A TD0 */
					};

					pinctrl_ssc0_rx: ssc0_rx {
						atmel,pins =
							<2 19 0x1 0x0	/* PC19 periph A RK0 */
							 2 20 0x1 0x0	/* PC20 periph A RF0 */
							 2 21 0x1 0x0>;	/* PC21 periph A RD0 */
					};
				};

				ssc1 {
					pinctrl_ssc1_tx: ssc1_tx {
						atmel,pins =
							<1 2 0x2 0x0	/* PB2 periph B TK1, conflicts with GTX2 */
							 1 3 0x2 0x0	/* PB3 periph B TF1, conflicts with GTX3 */
							 1 6 0x2 0x0>;	/* PB6 periph B TD1, conflicts with TD1 */
					};

					pinctrl_ssc1_rx: ssc1_rx {
						atmel,pins =
							<1 7 0x2 0x0	/* PB7 periph B RK1, conflicts with EREFCK */
							 1 10 0x2 0x0	/* PB10 periph B RF1, conflicts with GTXER */
							 1 11 0x2 0x0>;	/* PB11 periph B RD1, conflicts with GRXCK */
					};
				};

				uart0 {
					pinctrl_uart0: uart0-0 {
						atmel,pins =
							<2 29 0x1 0x0	/* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
							 2 30 0x1 0x1>;	/* PC30 periph A with pullup, conflicts with ISI_PCK */
					};
				};

				uart1 {
					pinctrl_uart1: uart1-0 {
						atmel,pins =
							<0 30 0x2 0x0	/* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
							 0 31 0x2 0x1>;	/* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
					};
				};

				usart0 {
					pinctrl_usart0: usart0-0 {
						atmel,pins =
							<3 17 0x1 0x0	/* PD17 periph A */
							 3 18 0x1 0x1>;	/* PD18 periph A with pullup */
					};

					pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
						atmel,pins =
							<3 15 0x1 0x0	/* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */
							 3 16 0x1 0x0>;	/* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */
					};
				};

				usart1 {
					pinctrl_usart1: usart1-0 {
						atmel,pins =
							<1 28 0x1 0x0	/* PB28 periph A */
							 1 29 0x1 0x1>;	/* PB29 periph A with pullup */
					};

					pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
						atmel,pins =
							<1 26 0x1 0x0	/* PB26 periph A, conflicts with GRX7 */
							 1 27 0x1 0x0>;	/* PB27 periph A, conflicts with G125CKO */
					};
				};

				usart2 {
					pinctrl_usart2: usart2-0 {
						atmel,pins =
							<4 25 0x2 0x0	/* PE25 periph B, conflicts with A25 */
							 4 26 0x2 0x1>;	/* PE26 periph B with pullup, conflicts NCS0 */
					};

					pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
						atmel,pins =
							<4 23 0x2 0x0	/* PE23 periph B, conflicts with A23 */
							 4 24 0x2 0x0>;	/* PE24 periph B, conflicts with A24 */
					};
				};

				usart3 {
					pinctrl_usart3: usart3-0 {
						atmel,pins =
							<4 18 0x2 0x0	/* PE18 periph B, conflicts with A18 */
							 4 19 0x2 0x1>;	/* PE19 periph B with pullup, conflicts with A19 */
					};

					pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
						atmel,pins =
							<4 16 0x2 0x0	/* PE16 periph B, conflicts with A16 */
							 4 17 0x2 0x0>;	/* PE17 periph B, conflicts with A17 */
					};
				};
			};

			pmc: pmc@fffffc00 {
				compatible = "atmel,at91rm9200-pmc";
				reg = <0xfffffc00 0x120>;
			};

			rstc@fffffe00 {
				compatible = "atmel,at91sam9g45-rstc";
				reg = <0xfffffe00 0x10>;
			};

			pit: timer@fffffe30 {
				compatible = "atmel,at91sam9260-pit";
				reg = <0xfffffe30 0xf>;
				interrupts = <3 4 5>;
			};

			watchdog@fffffe40 {
				compatible = "atmel,at91sam9260-wdt";
				reg = <0xfffffe40 0x10>;
				status = "disabled";
			};

			rtc@fffffeb0 {
				compatible = "atmel,at91rm9200-rtc";
				reg = <0xfffffeb0 0x30>;
				interrupts = <1 4 7>;
			};
		};

		usb0: gadget@00500000 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "atmel,at91sam9rl-udc";
			reg = <0x00500000 0x100000
			       0xf8030000 0x4000>;
			interrupts = <33 4 2>;
			status = "disabled";

			ep0 {
				reg = <0>;
				atmel,fifo-size = <64>;
				atmel,nb-banks = <1>;
			};

			ep1 {
				reg = <1>;
				atmel,fifo-size = <1024>;
				atmel,nb-banks = <3>;
				atmel,can-dma;
				atmel,can-isoc;
			};

			ep2 {
				reg = <2>;
				atmel,fifo-size = <1024>;
				atmel,nb-banks = <3>;
				atmel,can-dma;
				atmel,can-isoc;
			};

			ep3 {
				reg = <3>;
				atmel,fifo-size = <1024>;
				atmel,nb-banks = <2>;
				atmel,can-dma;
			};

			ep4 {
				reg = <4>;
				atmel,fifo-size = <1024>;
				atmel,nb-banks = <2>;
				atmel,can-dma;
			};

			ep5 {
				reg = <5>;
				atmel,fifo-size = <1024>;
				atmel,nb-banks = <2>;
				atmel,can-dma;
			};

			ep6 {
				reg = <6>;
				atmel,fifo-size = <1024>;
				atmel,nb-banks = <2>;
				atmel,can-dma;
			};

			ep7 {
				reg = <7>;
				atmel,fifo-size = <1024>;
				atmel,nb-banks = <2>;
				atmel,can-dma;
			};

			ep8 {
				reg = <8>;
				atmel,fifo-size = <1024>;
				atmel,nb-banks = <2>;
			};

			ep9 {
				reg = <9>;
				atmel,fifo-size = <1024>;
				atmel,nb-banks = <2>;
			};

			ep10 {
				reg = <10>;
				atmel,fifo-size = <1024>;
				atmel,nb-banks = <2>;
			};

			ep11 {
				reg = <11>;
				atmel,fifo-size = <1024>;
				atmel,nb-banks = <2>;
			};

			ep12 {
				reg = <12>;
				atmel,fifo-size = <1024>;
				atmel,nb-banks = <2>;
			};

			ep13 {
				reg = <13>;
				atmel,fifo-size = <1024>;
				atmel,nb-banks = <2>;
			};

			ep14 {
				reg = <14>;
				atmel,fifo-size = <1024>;
				atmel,nb-banks = <2>;
			};

			ep15 {
				reg = <15>;
				atmel,fifo-size = <1024>;
				atmel,nb-banks = <2>;
			};
		};

		usb1: ohci@00600000 {
			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
			reg = <0x00600000 0x100000>;
			interrupts = <32 4 2>;
			status = "disabled";
		};

		usb2: ehci@00700000 {
			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
			reg = <0x00700000 0x100000>;
			interrupts = <32 4 2>;
			status = "disabled";
		};

		nand0: nand@60000000 {
			compatible = "atmel,at91rm9200-nand";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <	0x60000000 0x01000000	/* EBI CS3 */
				0xffffc070 0x00000490	/* SMC PMECC regs */
				0xffffc500 0x00000100	/* SMC PMECC Error Location regs */
				0x00100000 0x00100000	/* ROM code */
				0x70000000 0x10000000	/* NFC Command Registers */
				0xffffc000 0x00000070	/* NFC HSMC regs */
				0x00200000 0x00100000	/* NFC SRAM banks */
				>;
			interrupts = <5 4 6>;
			atmel,nand-addr-offset = <21>;
			atmel,nand-cmd-offset = <22>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_nand0_ale_cle>;
			atmel,pmecc-lookup-table-offset = <0x10000 0x18000>;
			status = "disabled";
		};
	};
};