1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
|
MAX8907 regulator
Required properties:
- compatible: "maxim,max8907"
- reg: I2C slave address
- interrupts: The interrupt output of the controller
- mbatt-supply: The input supply for MBATT, BBAT, SDBY, VRTC.
- in-v1-supply: The input supply for SD1.
- in-v2-supply: The input supply for SD2.
- in-v3-supply: The input supply for SD3.
- in1-supply: The input supply for LDO1.
...
- in20-supply: The input supply for LDO20.
- regulators: A node that houses a sub-node for each regulator within the
device. Each sub-node is identified using the regulator-compatible
property, with valid values listed below. The content of each sub-node
is defined by the standard binding for regulators; see regulator.txt.
Valid regulator-compatible values are:
sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10,
ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19, ldo20, out5v,
out33v, bbat, sdby, vrtc.
Example:
max8907@3c {
compatible = "maxim,max8907";
reg = <0x3c>;
interrupts = <0 86 0x4>;
mbatt-supply = <&some_reg>;
in-v1-supply = <&mbatt_reg>;
...
in1-supply = <&mbatt_reg>;
...
regulators {
#address-cells = <1>;
#size-cells = <0>;
mbatt_reg: regulator@0 {
reg = <0>;
regulator-compatible = "mbatt";
regulator-name = "vbat_pmu";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
regulator@1 {
reg = <1>;
regulator-compatible = "sd1";
regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
regulator@2 {
reg = <2>;
regulator-compatible = "sd2";
regulator-name = "nvvdd_sv2,vdd_core";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
...
};
};
};
|
