/* * Copyright (C) 2005 David Brownell * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #ifndef __LINUX_SPI_H #define __LINUX_SPI_H #include #include #include #include #include #include struct dma_chan; struct spi_master; struct spi_transfer; /* * INTERFACES between SPI master-side drivers and SPI infrastructure. * (There's no SPI slave support for Linux yet...) */ extern struct bus_type spi_bus_type; /** * struct spi_statistics - statistics for spi transfers * @lock: lock protecting this structure * * @messages: number of spi-messages handled * @transfers: number of spi_transfers handled * @errors: number of errors during spi_transfer * @timedout: number of timeouts during spi_transfer * * @spi_sync: number of times spi_sync is used * @spi_sync_immediate: * number of times spi_sync is executed immediately * in calling context without queuing and scheduling * @spi_async: number of times spi_async is used * * @bytes: number of bytes transferred to/from device * @bytes_tx: number of bytes sent to device * @bytes_rx: number of bytes received from device * * @transfer_bytes_histo: * transfer bytes histogramm * * @transfers_split_maxsize: * number of transfers that have been split because of * maxsize limit */ struct spi_statistics { spinlock_t lock; /* lock for the whole structure */ unsigned long messages; unsigned long transfers; unsigned long errors; unsigned long timedout; unsigned long spi_sync; unsigned long spi_sync_immediate; unsigned long spi_async; unsigned long long bytes; unsigned long long bytes_rx; unsigned long long bytes_tx; #define SPI_STATISTICS_HISTO_SIZE 17 unsigned long transfer_bytes_histo[SPI_STATISTICS_HISTO_SIZE]; unsigned long transfers_split_maxsize; }; void spi_statistics_add_transfer_stats(struct spi_statistics *stats, struct spi_transfer *xfer, struct spi_master *master); #define SPI_STATISTICS_ADD_TO_FIELD(stats, field, count) \ do { \ unsigned long flags; \ spin_lock_irqsave(&(stats)->lock, flags); \ (stats)->field += count; \ spin_unlock_irqrestore(&(stats)->lock, flags); \ } while (0) #define SPI_STATISTICS_INCREMENT_FIELD(stats, field) \ SPI_STATISTICS_ADD_TO_FIELD(stats, field, 1) /** * struct spi_device - Master side proxy for an SPI slave device * @dev: Driver model representation of the device. * @master: SPI controller used with the device. * @max_speed_hz: Maximum clock rate to be used with this chip * (on this board); may be changed by the device's driver. * The spi_transfer.speed_hz can override this for each transfer. * @chip_select: Chipselect, distinguishing chips handled by @master. * @mode: The spi mode defines how data is clocked out and in. * This may be changed by the device's driver. * The "active low" default for chipselect mode can be overridden * (by specifying SPI_CS_HIGH) as can the "MSB first" default for * each word in a transfer (by specifying SPI_LSB_FIRST). * @bits_per_word: Data transfers involve one or more words; word sizes * like eight or 12 bits are common. In-memory wordsizes are * powers of two bytes (e.g. 20 bit samples use 32 bits). * This may be changed by the device's driver, or left at the * default (0) indicating protocol words are eight bit bytes. * The spi_transfer.bits_per_word can override this for each transfer. * @irq: Negative, or the number passed to request_irq() to receive * interrupts from this device. * @controller_state: Controller's runtime state * @controller_data: Board-specific definitions for controller, such as * FIFO initialization parameters; from board_info.controller_data * @modalias: Name of the driver to use with this device, or an alias * for that name. This appears in the sysfs "modalias" attribute * for driver coldplugging, and in uevents used for hotplugging * @cs_gpio: gpio number of the chipselect line (optional, -ENOENT when * when not using a GPIO line) * * @statistics: statistics for the spi_device * * A @spi_device is used to interchange data between an SPI slave * (usually a discrete chip) and CPU memory. * * In @dev, the platform_data is used to hold information about this * device that's meaningful to the device's protocol driver, but not * to its controller. One example might be an identifier for a chip * variant with slightly different functionality; another might be * information about how this particular board wires the chip's pins. */ struct spi_device { struct device dev; struct spi_master *master; u32 max_speed_hz; u8 chip_select; u8 bits_per_word; u16 mode; #define SPI_CPHA 0x01 /* clock phase */ #define SPI_CPOL 0x02 /* clock polarity */ #define SPI_MODE_0 (0|0) /* (original MicroWire) */ #define SPI_MODE_1 (0|SPI_CPHA) #define SPI_MODE_2 (SPI_CPOL|0) #define SPI_MODE_3 (SPI_CPOL|SPI_CPHA) #define SPI_CS_HIGH 0x04 /* chipselect active high? */ #define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */ #define SPI_3WIRE 0x10 /* SI/SO signals shared */ #define SPI_LOOP 0x20 /* loopback mode */ #define SPI_NO_CS 0x40 /* 1 dev/bus, no chipselect */ #define SPI_READY 0x80 /* slave pulls low to pause */ #define SPI_TX_DUAL 0x100 /* transmit with 2 wires */ #define SPI_TX_QUAD 0x200 /* transmit with 4 wires */ #define SPI_RX_DUAL 0x400 /* receive with 2 wires */ #define SPI_RX_QUAD 0x800 /* receive with 4 wires */ int irq; void *controller_state; void *controller_data; char modalias[SPI_NAME_SIZE]; int cs_gpio; /* chip select gpio */ /* the statistics */ struct spi_statistics statistics; /* * likely need more hooks for more protocol options affecting how * the controller talks to each chip, like: * - memory packing (12 bit samples into low bits, others zeroed) * - priority * - drop chipselect after each word * - chipselect delays * - ... */ }; static inline struct spi_device *to_spi_device(struct device *dev) { return dev ? container_of(dev, struct spi_device, dev) : NULL; } /* most drivers won't need to care about device refcounting */ static inline struct spi_device *spi_dev_get(struct spi_device *spi) { return (spi && get_device(&spi->dev)) ? spi : NULL; } static inline void spi_dev_put(struct spi_device *spi) { if (spi) put_device(&spi->dev); } /* ctldata is for the bus_master driver's runtime state */ static inline void *spi_get_ctldata(struct spi_device *spi) { return spi->controller_state; } static inline void spi_set_ctldata(struct spi_device *spi, void *state) { spi->controller_state = state; } /* device driver data */ static inline void spi_set_drvdata(struct spi_device *spi, void *data) { dev_set_drvdata(&spi->dev, data); } static inline void *spi_get_drvdata(struct spi_device *spi) { return dev_get_drvdata(&spi->dev); } struct spi_message; struct spi_transfer; /** * struct spi_driver - Host side "protocol" driver * @id_table: List of SPI devices supported by this driver * @probe: Binds this driver to the spi device. Drivers can verify * that the device is actually present, and may need to configure * characteristics (such as bits_per_word) which weren't needed for * the initial configuration done during system setup. * @remove: Unbinds this driver from the spi device * @shutdown: Standard shutdown callback used during system state * transitions such as powerdown/halt and kexec * @driver: SPI device drivers should initialize the name and owner * field of this structure. * * This represents the kind of device driver that uses SPI messages to * interact with the hardware at the other end of a SPI link. It's called * a "protocol" driver because it works through messages rather than talking * directly to SPI hardware (which is what the underlying SPI controller * driver does to pass those messages). These protocols are defined in the * specification for the device(s) supported by the driver. * * As a rule, those device protocols represent the lowest level interface * supported by a driver, and it will support upper level interfaces too. * Examples of such upper levels include frameworks like MTD, networking, * MMC, RTC, filesystem character device nodes, and hardware monitoring. */ struct spi_driver { const struct spi_device_id *id_table; int (*probe)(struct spi_device *spi); int (*remove)(struct spi_device *spi); void (*shutdown)(struct spi_device *spi); struct device_driver driver; }; static inline struct spi_driver *to_spi_driver(struct device_driver *drv) { return drv ? container_of(drv, struct spi_driver, driver) : NULL; } extern int __spi_register_driver(struct module *owner, struct spi_driver *sdrv); /** * spi_unregister_driver - reverse effect of spi_register_driver * @sdrv: the driver to unregister * Context: can sleep */ static inline void spi_unregister_driver(struct spi_driver *sdrv) { if (sdrv) driver_unregister(&sdrv->driver); } /* use a define to avoid include chaining to get THIS_MODULE */ #define spi_register_driver(driver) \ __spi_register_driver(THIS_MODULE, driver) /** * module_spi_driver() - Helper macro for registering a SPI driver * @__spi_driver: spi_driver struct * * Helper macro for SPI drivers which do not do anything special in module * init/exit. This eliminates a lot of boilerplate. Each module may only * use this macro once, and calling it replaces module_init() and module_exit() */ #define module_spi_driver(__spi_driver) \ module_driver(__spi_driver, spi_register_driver, \ spi_unregister_driver) /** * struct spi_master - interface to SPI master controller * @dev: device interface to this driver * @list: link with the global spi_master list * @bus_num: board-specific (and often SOC-specific) identifier for a * given SPI controller. * @num_chipselect: chipselects are used to distinguish individual * SPI slaves, and are numbered from zero to num_chipselects. * each slave has a chipselect signal, but it's common that not * every chipselect is connected to a slave. * @dma_alignment: SPI controller constraint on DMA buffers alignment. * @mode_bits: flags understood by this controller driver * @bits_per_word_mask: A mask indicating which values of bits_per_word are * supported by the driver. Bit n indicates that a bits_per_word n+1 is * supported. If set, the SPI core will reject any transfer with an * unsupported bits_per_word. If not set, this value is simply ignored, * and it's up to the individual driver to perform any validation. * @min_speed_hz: Lowest supported transfer speed * @max_speed_hz: Highest supported transfer speed * @flags: other constraints relevant to this driver * @bus_lock_spinlock: spinlock for SPI bus locking * @bus_lock_mutex: mutex for SPI bus locking * @bus_lock_flag: indicates that the SPI bus is locked for exclusive use * @setup: updates the device mode and clocking records used by a * device's SPI controller; protocol code may call this. This * must fail if an unrecognized or unsupported mode is requested. * It's always safe to call this unless transfers are pending on * the device whose settings are being modified. * @transfer: adds a message to the controller's transfer queue. * @cleanup: frees controller-specific state * @can_dma: determine whether this master supports DMA * @queued: whether this master is providing an internal message queue * @kworker: thread struct for message pump * @kworker_task: pointer to task for message pump kworker thread * @pump_messages: work struct for scheduling work to the message pump * @queue_lock: spinlock to syncronise access to message queue * @queue: message queue * @idling: the device is entering idle state * @cur_msg: the currently in-flight message * @cur_msg_prepared: spi_prepare_message was called for the currently * in-flight message * @cur_msg_mapped: message has been mapped for DMA * @xfer_completion: used by core transfer_one_message() * @busy: message pump is busy * @running: message pump is running * @rt: whether this queue is set to run as a realtime task * @auto_runtime_pm: the core should ensure a runtime PM reference is held * while the hardware is prepared, using the parent * device for the spidev * @max_dma_len: Maximum length of a DMA transfer for the device. * @prepare_transfer_hardware: a message will soon arrive from the queue * so the subsystem requests the driver to prepare the transfer hardware * by issuing this call * @transfer_one_message: the subsystem calls the driver to transfer a single * message while queuing transfers that arrive in the meantime. When the * driver is finished with this message, it must call * spi_finalize_current_message() so the subsystem can issue the next * message * @unprepare_transfer_hardware: there are currently no more messages on the * queue so the subsystem notifies the driver that it may relax the * hardware by issuing this call * @set_cs: set the logic level of the chip select line. May be called * from interrupt context. * @prepare_message: set up the controller to transfer a single message, * for example doing DMA mapping. Called from threaded * context. * @transfer_one: transfer a single spi_transfer. * - return 0 if the transfer is finished, * - return 1 if the transfer is still in progress. When * the driver is finished with this transfer it must * call spi_finalize_current_transfer() so the subsystem * can issue the next transfer. Note: transfer_one and * transfer_one_message are mutually exclusive; when both * are set, the generic subsystem does not call your * transfer_one callback. * @handle_err: the subsystem calls the driver to handle an error that occurs * in the generic implementation of transfer_one_message(). * @unprepare_message: undo any work done by prepare_message(). * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS * number. Any individual value may be -ENOENT for CS lines that * are not GPIOs (driven by the SPI controller itself). * @statistics: statistics for the spi_master * @dma_tx: DMA transmit channel * @dma_rx: DMA receive channel * @dummy_rx: dummy receive buffer for full-duplex devices * @dummy_tx: dummy transmit buffer for full-duplex devices * * Each SPI master controller can communicate with one or more @spi_device * children. These make a small bus, sharing MOSI, MISO and SCK signals * but not chip select signals. Each device may be configured to use a * different clock rate, since those shared signals are ignored unless * the chip is selected. * * The driver for an SPI controller manages access to those devices through * a queue of spi_message transactions, copying data between CPU memory and * an SPI slave device. For each such message it queues, it calls the * message's completion function when the transaction completes. */ struct spi_master { struct device dev; struct list_head list; /* other than negative (== assign one dynamically), bus_num is fully * board-specific. usually that simplifies to being SOC-specific. * example: one SOC has three SPI controllers, numbered 0..2, * and one board's schematics might show it using SPI-2. software * would normally use bus_num=2 for that controller. */ s16 bus_num; /* chipselects will be integral to many controllers; some others * might use board-specific GPIOs. */ u16 num_chipselect; /* some SPI controllers pose alignment requirements on DMAable * buffers; let protocol drivers know about these requirements. */ u16 dma_alignment; /* spi_device.mode flags understood by this controller driver */ u16 mode_bits; /* bitmask of supported bits_per_word for transfers */ u32 bits_per_word_mask; #define SPI_BPW_MASK(bits) BIT((bits) - 1) #define SPI_BIT_MASK(bits) (((bits) == 32) ? ~0U : (BIT(bits) - 1)) #define SPI_BPW_RANGE_MASK(min, max) (SPI_BIT_MASK(max) - SPI_BIT_MASK(min - 1)) /* limits on transfer speed */ u32 min_speed_hz; u32 max_speed_hz; /* other constraints relevant to this driver */ u16 flags; #define SPI_MASTER_HALF_DUPLEX BIT(0) /* can't do full duplex */ #define SPI_MASTER_NO_RX BIT(1) /* can't do buffer read */ #define SPI_MASTER_NO_TX BIT(2) /* can't do buffer write */ #define SPI_MASTER_MUST_RX BIT(3) /* requires rx */ #define SPI_MASTER_MUST_TX BIT(4) /* requires tx */ /* * on some hardware transfer size may be constrained * the limit may depend on device transfer settings */ size_t (*max_transfer_size)(struct spi_device *spi); /* lock and mutex for SPI bus locking */ spinlock_t bus_lock_spinlock; struct mutex bus_lock_mutex; /* flag indicating that the SPI bus is locked for exclusive use */ bool bus_lock_flag; /* Setup mode and clock, etc (spi driver may call many times). * * IMPORTANT: this may be called when transfers to another * device are active. DO NOT UPDATE SHARED REGISTERS in ways * which could break those transfers. */ int (*setup)(struct spi_device *spi); /* bidirectional bulk transfers * * + The transfer() method may not sleep; its main role is * just to add the message to the queue. * + For now there's no remove-from-queue operation, or * any other request management * + To a given spi_device, message queueing is pure fifo * * + The master's main job is to process its message queue, * selecting a chip then transferring data * + If there are multiple spi_device children, the i/o queue * arbitration algorithm is unspecified (round robin, fifo, * priority, reservations, preemption, etc) * * + Chipselect stays active during the entire message * (unless modified by spi_transfer.cs_change != 0). * + The message transfers use clock and SPI mode parameters * previously established by setup() for this device */ int (*transfer)(struct spi_device *spi, struct spi_message *mesg); /* called on release() to free memory provided by spi_master */ void (*cleanup)(struct spi_device *spi); /* * Used to enable core support for DMA handling, if can_dma() * exists and returns true then the transfer will be mapped * prior to transfer_one() being called. The driver should * not modify or store xfer and dma_tx and dma_rx must be set * while the device is prepared. */ bool (*can_dma)(struct spi_master *master, struct spi_device *spi, struct spi_transfer *xfer); /* * These hooks are for drivers that want to use the generic * master transfer queueing mechanism. If these are used, the * transfer() function above must NOT be specified by the driver. * Over time we expect SPI drivers to be phased over to this API. */ bool queued; struct kthread_worker kworker; struct task_struct *kworker_task; struct kthread_work pump_messages; spinlock_t queue_lock; struct list_head queue; struct spi_message *cur_msg; bool idling; bool busy; bool running; bool rt; bool auto_runtime_pm; bool cur_msg_prepared; bool cur_msg_mapped; struct completion xfer_completion; size_t max_dma_len; int (*prepare_transfer_hardware)(struct spi_master *master); int (*transfer_one_message)(struct spi_master *master, struct spi_message *mesg); int (*unprepare_transfer_hardware)(struct spi_master *master); int (*prepare_message)(struct spi_master *master, struct spi_message *message); int (*unprepare_message)(struct spi_master *master, struct spi_message *message); /* * These hooks are for drivers that use a generic implementation * of transfer_one_message() provied by the core. */ void (*set_cs)(struct spi_device *spi, bool enable); int (*transfer_one)(struct spi_master *master, struct spi_device *spi, struct spi_transfer *transfer); void (*handle_err)(struct spi_master *master, struct spi_message *message); /* gpio chip select */ int *cs_gpios; /* statistics */ struct spi_statistics statistics; /* DMA channels for use with core dmaengine helpers */ struct dma_chan *dma_tx; struct dma_chan *dma_rx; /* dummy data for full duplex devices */ void *dummy_rx; void *dummy_tx; }; static inline void *spi_master_get_devdata(struct spi_master *master) { return dev_get_drvdata(&master->dev); } static inline void spi_master_set_devdata(struct spi_master *master, void *data) { dev_set_drvdata(&master->dev, data); } static inline struct spi_master *spi_master_get(struct spi_master *master) { if (!master || !get_device(&master->dev)) return NULL; return master; } static inline void spi_master_put(struct spi_master *master) { if (master) put_device(&master->dev); } /* PM calls that need to be issued by the driver */ extern int spi_master_suspend(struct spi_master *master); extern int spi_master_resume(struct spi_master *master); /* Calls the driver make to interact with the message queue */ extern struct spi_message *spi_get_next_queued_message(struct spi_master *master); extern void spi_finalize_current_message(struct spi_master *master); extern void spi_finalize_current_transfer(struct spi_master *master); /* the spi driver core manages memory for the spi_master classdev */ extern struct spi_master * spi_alloc_master(struct device *host, unsigned size); extern int spi_register_master(struct spi_master *master); extern int devm_spi_register_master(struct device *dev, struct spi_master *master); extern void spi_unregister_master(struct spi_master *master); extern struct spi_master *spi_busnum_to_master(u16 busnum); /* * SPI resource management while processing a SPI message */ /** * struct spi_res - spi resource management structure * @entry: list entry * @release: release code called prior to freeing this resource * @data: extra data allocated for the specific use-case * * this is based on ideas from devres, but focused on life-cycle * management during spi_message processing */ typedef void (*spi_res_release_t)(struct spi_master *master, struct spi_message *msg, void *res); struct spi_res { struct list_head entry; spi_res_release_t release; unsigned long long data[]; /* guarantee ull alignment */ }; extern void *spi_res_alloc(struct spi_device *spi, spi_res_release_t release, size_t size, gfp_t gfp); extern void spi_res_add(struct spi_message *message, void *res); extern void spi_res_free(void *res); extern void spi_res_release(struct spi_master *master, struct spi_message *message); /*---------------------------------------------------------------------------*/ /* * I/O INTERFACE between SPI controller and protocol drivers * * Protocol drivers use a queue of spi_messages, each transferring data * between the controller and memory buffers. * * The spi_messages themselves consist of a series of read+write transfer * segments. Those segments always read the same number of bits as they * write; but one or the other is easily ignored by passing a null buffer * pointer. (This is unlike most types of I/O API, because SPI hardware * is full duplex.) * * NOTE: Allocation of spi_transfer and spi_message memory is entirely * up to the protocol driver, which guarantees the integrity of both (as * well as the data buffers) for as long as the message is queued. */ /** * struct spi_transfer - a read/write buffer pair * @tx_buf: data to be written (dma-safe memory), or NULL * @rx_buf: data to be read (dma-safe memory), or NULL * @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped * @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped * @tx_nbits: number of bits used for writing. If 0 the default * (SPI_NBITS_SINGLE) is used. * @rx_nbits: number of bits used for reading. If 0 the default * (SPI_NBITS_SINGLE) is used. * @len: size of rx and tx buffers (in bytes) * @speed_hz: Select a speed other than the device default for this * transfer. If 0 the default (from @spi_device) is used. * @bits_per_word: select a bits_per_word other than the device default * for this transfer. If 0 the default (from @spi_device) is used. * @cs_change: affects chipselect after this transfer completes * @delay_usecs: microseconds to delay after this transfer before * (optionally) changing the chipselect status, then starting * the next transfer or completing this @spi_message. * @transfer_list: transfers are sequenced through @spi_message.transfers * @tx_sg: Scatterlist for transmit, currently not for client use * @rx_sg: Scatterlist for receive, currently not for client use * * SPI transfers always write the same number of bytes as they read. * Protocol drivers should always provide @rx_buf and/or @tx_buf. * In some cases, they may also want to provide DMA addresses for * the data being transferred; that may reduce overhead, when the * underlying driver uses dma. * * If the transmit buffer is null, zeroes will be shifted out * while filling @rx_buf. If the receive buffer is null, the data * shifted in will be discarded. Only "len" bytes shift out (or in). * It's an error to try to shift out a partial word. (For example, by * shifting out three bytes with word size of sixteen or twenty bits; * the former uses two bytes per word, the latter uses four bytes.) * * In-memory data values are always in native CPU byte order, translated * from the wire byte order (big-endian except with SPI_LSB_FIRST). So * for example when bits_per_word is sixteen, buffers are 2N bytes long * (@len = 2N) and hold N sixteen bit words in CPU byte order. * * When the word size of the SPI transfer is not a power-of-two multiple * of eight bits, those in-memory words include extra bits. In-memory * words are always seen by protocol drivers as right-justified, so the * undefined (rx) or unused (tx) bits are always the most significant bits. * * All SPI transfers start with the relevant chipselect active. Normally * it stays selected until after the last transfer in a message. Drivers * can affect the chipselect signal using cs_change. * * (i) If the transfer isn't the last one in the message, this flag is * used to make the chipselect briefly go inactive in the middle of the * message. Toggling chipselect in this way may be needed to terminate * a chip command, letting a single spi_message perform all of group of * chip transactions together. * * (ii) When the transfer is the last one in the message, the chip may * stay selected until the next transfer. On multi-device SPI busses * with nothing blocking messages going to other devices, this is just * a performance hint; starting a message to another device deselects * this one. But in other cases, this can be used to ensure correctness. * Some devices need protocol transactions to be built from a series of * spi_message submissions, where the content of one message is determined * by the results of previous messages and where the whole transaction * ends when the chipselect goes intactive. * * When SPI can transfer in 1x,2x or 4x. It can get this transfer information * from device through @tx_nbits and @rx_nbits. In Bi-direction, these * two should both be set. User can set transfer mode with SPI_NBITS_SINGLE(1x) * SPI_NBITS_DUAL(2x) and SPI_NBITS_QUAD(4x) to support these three transfer. * * The code that submits an spi_message (and its spi_transfers) * to the lower layers is responsible for managing its memory. * Zero-initialize every field you don't set up explicitly, to * insulate against future API updates. After you submit a message * and its transfers, ignore them until its completion callback. */ struct spi_transfer { /* it's ok if tx_buf == rx_buf (right?) * for MicroWire, one buffer must be null * buffers must work with dma_*map_single() calls, unless * spi_message.is_dma_mapped reports a pre-existing mapping */ const void *tx_buf; void *rx_buf; unsigned len; dma_addr_t tx_dma; dma_addr_t rx_dma; struct sg_table tx_sg; struct sg_table rx_sg; unsigned cs_change:1; unsigned tx_nbits:3; unsigned rx_nbits:3; #define SPI_NBITS_SINGLE 0x01 /* 1bit transfer */ #define SPI_NBITS_DUAL 0x02 /* 2bits transfer */ #define SPI_NBITS_QUAD 0x04 /* 4bits transfer */ u8 bits_per_word; u16 delay_usecs; u32 speed_hz; struct list_head transfer_list; }; /** * struct spi_message - one multi-segment SPI transaction * @transfers: list of transfer segments in this transaction * @spi: SPI device to which the transaction is queued * @is_dma_mapped: if true, the caller provided both dma and cpu virtual * addresses for each transfer buffer * @complete: called to report transaction completions * @context: the argument to complete() when it's called * @frame_length: the total number of bytes in the message * @actual_length: the total number of bytes that were transferred in all * successful segments * @status: zero for success, else negative errno * @queue: for use by whichever driver currently owns the message * @state: for use by whichever driver currently owns the message * @resources: for resource management when the spi message is processed * * A @spi_message is used to execute an atomic sequence of data transfers, * each represented by a struct spi_transfer. The sequence is "atomic" * in the sense that no other spi_message may use that SPI bus until that * sequence completes. On some systems, many such sequences can execute as * as single programmed DMA transfer. On all systems, these messages are * queued, and might complete after transactions to other devices. Messages * sent to a given spi_device are always executed in FIFO order. * * The code that submits an spi_message (and its spi_transfers) * to the lower layers is responsible for managing its memory. * Zero-initialize every field you don't set up explicitly, to * insulate against future API updates. After you submit a message * and its transfers, ignore them until its completion callback. */ struct spi_message { struct list_head transfers; struct spi_device *spi; unsigned is_dma_mapped:1; /* REVISIT: we might want a flag affecting the behavior of the * last transfer ... allowing things like "read 16 bit length L" * immediately followed by "read L bytes". Basically imposing * a specific message scheduling algorithm. * * Some controller drivers (message-at-a-time queue processing) * could provide that as their default scheduling algorithm. But * others (with multi-message pipelines) could need a flag to * tell them about such special cases. */ /* completion is reported through a callback */ void (*complete)(void *context); void *context; unsigned frame_length; unsigned actual_length; int status; /* for optional use by whatever driver currently owns the * spi_message ... between calls to spi_async and then later * complete(), that's the spi_master controller driver. */ struct list_head queue; void *state; /* list of spi_res reources when the spi message is processed */ struct list_head resources; }; static inline void spi_message_init_no_memset(struct spi_message *m) { INIT_LIST_HEAD(&m->transfers); INIT_LIST_HEAD(&m->resources); } static inline void spi_message_init(struct spi_message *m) { memset(m, 0, sizeof *m); spi_message_init_no_memset(m); } static inline void spi_message_add_tail(struct spi_transfer *t, struct spi_message *m) { list_add_tail(&t->transfer_list, &m->transfers); } static inline void spi_transfer_del(struct spi_transfer *t) { list_del(&t->transfer_list); } /** * spi_message_init_with_transfers - Initialize spi_message and append transfers * @m: spi_message to be initialized * @xfers: An array of spi transfers * @num_xfers: Number of items in the xfer array * * This function initializes the given spi_message and adds each spi_transfer in * the given array to the message. */ static inline void spi_message_init_with_transfers(struct spi_message *m, struct spi_transfer *xfers, unsigned int num_xfers) { unsigned int i; spi_message_init(m); for (i = 0; i < num_xfers; ++i) spi_message_add_tail(&xfers[i], m); } /* It's fine to embed message and transaction structures in other data * structures so long as you don't free them while they're in use. */ static inline struct spi_message *spi_message_alloc(unsigned ntrans, gfp_t flags) { struct spi_message *m; m = kzalloc(sizeof(struct spi_message) + ntrans * sizeof(struct spi_transfer), flags); if (m) { unsigned i; struct spi_transfer *t = (struct spi_transfer *)(m + 1); INIT_LIST_HEAD(&m->transfers); for (i = 0; i < ntrans; i++, t++) spi_message_add_tail(t, m); } return m; } static inline void spi_message_free(struct spi_message *m) { kfree(m); } extern int spi_setup(struct spi_device *spi); extern int spi_async(struct spi_device *spi, struct spi_message *message); extern int spi_async_locked(struct spi_device *spi, struct spi_message *message); static inline size_t spi_max_transfer_size(struct spi_device *spi) { struct spi_master *master = spi->master; if (!master->max_transfer_size) return SIZE_MAX; return master->max_transfer_size(spi); } /*---------------------------------------------------------------------------*/ /* SPI transfer replacement methods which make use of spi_res */ /** * struct spi_replaced_transfers - structure describing the spi_transfer * replacements that have occurred * so that they can get reverted * @release: some extra release code to get executed prior to * relasing this structure * @extradata: pointer to some extra data if requested or NULL * @replaced_transfers: transfers that have been replaced and which need * to get restored * @replaced_after: the transfer after which the @replaced_transfers * are to get re-inserted * @inserted: number of transfers inserted * @inserted_transfers: array of spi_transfers of array-size @inserted, * that have been replacing replaced_transfers * * note: that @extradata will point to @inserted_transfers[@inserted] * if some extra allocation is requested, so alignment will be the same * as for spi_transfers */ struct spi_replaced_transfers; typedef void (*spi_replaced_release_t)(struct spi_master *master, struct spi_message *msg, struct spi_replaced_transfers *res); struct spi_replaced_transfers { spi_replaced_release_t release; void *extradata; struct list_head replaced_transfers; struct list_head *replaced_after; size_t inserted; struct spi_transfer inserted_transfers[]; }; extern struct spi_replaced_transfers *spi_replace_transfers( struct spi_message *msg, struct spi_transfer *xfer_first, size_t remove, size_t insert, spi_replaced_release_t release, size_t extradatasize, gfp_t gfp); /*---------------------------------------------------------------------------*/ /* SPI transfer transformation methods */ extern int spi_split_transfers_maxsize(struct spi_master *master, struct spi_message *msg, size_t maxsize, gfp_t gfp); /*---------------------------------------------------------------------------*/ /* All these synchronous SPI transfer routines are utilities layered * over the core async transfer primitive. Here, "synchronous" means * they will sleep uninterruptibly until the async transfer completes. */ extern int spi_sync(struct spi_device *spi, struct spi_message *message); extern int spi_sync_locked(struct spi_device *spi, struct spi_message *message); extern int spi_bus_lock(struct spi_master *master); extern int spi_bus_unlock(struct spi_master *master); /** * spi_write - SPI synchronous write * @spi: device to which data will be written * @buf: data buffer * @len: data buffer size * Context: can sleep * * This function writes the buffer @buf. * Callable only from contexts that can sleep. * * Return: zero on success, else a negative error code. */ static inline int spi_write(struct spi_device *spi, const void *buf, size_t len) { struct spi_transfer t = { .tx_buf = buf, .len = len, }; struct spi_message m; spi_message_init(&m); spi_message_add_tail(&t, &m); return spi_sync(spi, &m); } /** * spi_read - SPI synchronous read * @spi: device from which data will be read * @buf: data buffer * @len: data buffer size * Context: can sleep * * This function reads the buffer @buf. * Callable only from contexts that can sleep. * * Return: zero on success, else a negative error code. */ static inline int spi_read(struct spi_device *spi, void *buf, size_t len) { struct spi_transfer t = { .rx_buf = buf, .len = len, }; struct spi_message m; spi_message_init(&m); spi_message_add_tail(&t, &m); return spi_sync(spi, &m); } /** * spi_sync_transfer - synchronous SPI data transfer * @spi: device with which data will be exchanged * @xfers: An array of spi_transfers * @num_xfers: Number of items in the xfer array * Context: can sleep * * Does a synchronous SPI data transfer of the given spi_transfer array. * * For more specific semantics see spi_sync(). * * Return: Return: zero on success, else a negative error code. */ static inline int spi_sync_transfer(struct spi_device *spi, struct spi_transfer *xfers, unsigned int num_xfers) { struct spi_message msg; spi_message_init_with_transfers(&msg, xfers, num_xfers); return spi_sync(spi, &msg); } /* this copies txbuf and rxbuf data; for small transfers only! */ extern int spi_write_then_read(struct spi_device *spi, const void *txbuf, unsigned n_tx, void *rxbuf, unsigned n_rx); /** * spi_w8r8 - SPI synchronous 8 bit write followed by 8 bit read * @spi: device with which data will be exchanged * @cmd: command to be written before data is read back * Context: can sleep * * Callable only from contexts that can sleep. * * Return: the (unsigned) eight bit number returned by the * device, or else a negative error code. */ static inline ssize_t spi_w8r8(struct spi_device *spi, u8 cmd) { ssize_t status; u8 result; status = spi_write_then_read(spi, &cmd, 1, &result, 1); /* return negative errno or unsigned value */ return (status < 0) ? status : result; } /** * spi_w8r16 - SPI synchronous 8 bit write followed by 16 bit read * @spi: device with which data will be exchanged * @cmd: command to be written before data is read back * Context: can sleep * * The number is returned in wire-order, which is at least sometimes * big-endian. * * Callable only from contexts that can sleep. * * Return: the (unsigned) sixteen bit number returned by the * device, or else a negative error code. */ static inline ssize_t spi_w8r16(struct spi_device *spi, u8 cmd) { ssize_t status; u16 result; status = spi_write_then_read(spi, &cmd, 1, &result, 2); /* return negative errno or unsigned value */ return (status < 0) ? status : result; } /** * spi_w8r16be - SPI synchronous 8 bit write followed by 16 bit big-endian read * @spi: device with which data will be exchanged * @cmd: command to be written before data is read back * Context: can sleep * * This function is similar to spi_w8r16, with the exception that it will * convert the read 16 bit data word from big-endian to native endianness. * * Callable only from contexts that can sleep. * * Return: the (unsigned) sixteen bit number returned by the device in cpu * endianness, or else a negative error code. */ static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd) { ssize_t status; __be16 result; status = spi_write_then_read(spi, &cmd, 1, &result, 2); if (status < 0) return status; return be16_to_cpu(result); } /*---------------------------------------------------------------------------*/ /* * INTERFACE between board init code and SPI infrastructure. * * No SPI driver ever sees these SPI device table segments, but * it's how the SPI core (or adapters that get hotplugged) grows * the driver model tree. * * As a rule, SPI devices can't be probed. Instead, board init code * provides a table listing the devices which are present, with enough * information to bind and set up the device's driver. There's basic * support for nonstatic configurations too; enough to handle adding * parport adapters, or microcontrollers acting as USB-to-SPI bridges. */ /** * struct spi_board_info - board-specific template for a SPI device * @modalias: Initializes spi_device.modalias; identifies the driver. * @platform_data: Initializes spi_device.platform_data; the particular * data stored there is driver-specific. * @controller_data: Initializes spi_device.controller_data; some * controllers need hints about hardware setup, e.g. for DMA. * @irq: Initializes spi_device.irq; depends on how the board is wired. * @max_speed_hz: Initializes spi_device.max_speed_hz; based on limits * from the chip datasheet and board-specific signal quality issues. * @bus_num: Identifies which spi_master parents the spi_device; unused * by spi_new_device(), and otherwise depends on board wiring. * @chip_select: Initializes spi_device.chip_select; depends on how * the board is wired. * @mode: Initializes spi_device.mode; based on the chip datasheet, board * wiring (some devices support both 3WIRE and standard modes), and * possibly presence of an inverter in the chipselect path. * * When adding new SPI devices to the device tree, these structures serve * as a partial device template. They hold information which can't always * be determined by drivers. Information that probe() can establish (such * as the default transfer wordsize) is not included here. * * These structures are used in two places. Their primary role is to * be stored in tables of board-specific device descriptors, which are * declared early in board initialization and then used (much later) to * populate a controller's device tree after the that controller's driver * initializes. A secondary (and atypical) role is as a parameter to * spi_new_device() call, which happens after those controller drivers * are active in some dynamic board configuration models. */ struct spi_board_info { /* the device name and module name are coupled, like platform_bus; * "modalias" is normally the driver name. * * platform_data goes to spi_device.dev.platform_data, * controller_data goes to spi_device.controller_data, * irq is copied too */ char modalias[SPI_NAME_SIZE]; const void *platform_data; void *controller_data; int irq; /* slower signaling on noisy or low voltage boards */ u32 max_speed_hz; /* bus_num is board specific and matches the bus_num of some * spi_master that will probably be registered later. * * chip_select reflects how this chip is wired to that master; * it's less than num_chipselect. */ u16 bus_num; u16 chip_select; /* mode becomes spi_device.mode, and is essential for chips * where the default of SPI_CS_HIGH = 0 is wrong. */ u16 mode; /* ... may need additional spi_device chip config data here. * avoid stuff protocol drivers can set; but include stuff * needed to behave without being bound to a driver: * - quirks like clock rate mattering when not selected */ }; #ifdef CONFIG_SPI extern int spi_register_board_info(struct spi_board_info const *info, unsigned n); #else /* board init code may ignore whether SPI is configured or not */ static inline int spi_register_board_info(struct spi_board_info const *info, unsigned n) { return 0; } #endif /* If you're hotplugging an adapter with devices (parport, usb, etc) * use spi_new_device() to describe each device. You can also call * spi_unregister_device() to start making that device vanish, but * normally that would be handled by spi_unregister_master(). * * You can also use spi_alloc_device() and spi_add_device() to use a two * stage registration sequence for each spi_device. This gives the caller * some more control over the spi_device structure before it is registered, * but requires that caller to initialize fields that would otherwise * be defined using the board info. */ extern struct spi_device * spi_alloc_device(struct spi_master *master); extern int spi_add_device(struct spi_device *spi); extern struct spi_device * spi_new_device(struct spi_master *, struct spi_board_info *); extern void spi_unregister_device(struct spi_device *spi); extern const struct spi_device_id * spi_get_device_id(const struct spi_device *sdev); static inline bool spi_transfer_is_last(struct spi_master *master, struct spi_transfer *xfer) { return list_is_last(&xfer->transfer_list, &master->cur_msg->transfers); } #endif /* __LINUX_SPI_H */