/* * Copyright (c) 2000-2003,2005 Silicon Graphics, Inc. * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it would be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write the Free Software Foundation, * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef __XFS_LOG_PRIV_H__ #define __XFS_LOG_PRIV_H__ struct xfs_buf; struct ktrace; struct log; struct xlog_ticket; struct xfs_buf_cancel; struct xfs_mount; /* * Macros, structures, prototypes for internal log manager use. */ #define XLOG_MIN_ICLOGS 2 #define XLOG_MAX_ICLOGS 8 #define XLOG_HEADER_MAGIC_NUM 0xFEEDbabe /* Invalid cycle number */ #define XLOG_VERSION_1 1 #define XLOG_VERSION_2 2 /* Large IClogs, Log sunit */ #define XLOG_VERSION_OKBITS (XLOG_VERSION_1 | XLOG_VERSION_2) #define XLOG_MIN_RECORD_BSIZE (16*1024) /* eventually 32k */ #define XLOG_BIG_RECORD_BSIZE (32*1024) /* 32k buffers */ #define XLOG_MAX_RECORD_BSIZE (256*1024) #define XLOG_HEADER_CYCLE_SIZE (32*1024) /* cycle data in header */ #define XLOG_MIN_RECORD_BSHIFT 14 /* 16384 == 1 << 14 */ #define XLOG_BIG_RECORD_BSHIFT 15 /* 32k == 1 << 15 */ #define XLOG_MAX_RECORD_BSHIFT 18 /* 256k == 1 << 18 */ #define XLOG_BTOLSUNIT(log, b) (((b)+(log)->l_mp->m_sb.sb_logsunit-1) / \ (log)->l_mp->m_sb.sb_logsunit) #define XLOG_LSUNITTOB(log, su) ((su) * (log)->l_mp->m_sb.sb_logsunit) #define XLOG_HEADER_SIZE 512 #define XLOG_REC_SHIFT(log) \ BTOBB(1 << (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) ? \ XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT)) #define XLOG_TOTAL_REC_SHIFT(log) \ BTOBB(XLOG_MAX_ICLOGS << (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) ? \ XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT)) /* * set lsns */ #define ASSIGN_ANY_LSN_HOST(lsn,cycle,block) \ { \ (lsn) = ((xfs_lsn_t)(cycle)<<32)|(block); \ } #define ASSIGN_ANY_LSN_DISK(lsn,cycle,block) \ { \ INT_SET(((uint *)&(lsn))[0], ARCH_CONVERT, (cycle)); \ INT_SET(((uint *)&(lsn))[1], ARCH_CONVERT, (block)); \ } #define ASSIGN_LSN(lsn,log) \ ASSIGN_ANY_LSN_DISK(lsn,(log)->l_curr_cycle,(log)->l_curr_block); #define XLOG_SET(f,b) (((f) & (b)) == (b)) #define GET_CYCLE(ptr, arch) \ (INT_GET(*(uint *)(ptr), arch) == XLOG_HEADER_MAGIC_NUM ? \ INT_GET(*((uint *)(ptr)+1), arch) : \ INT_GET(*(uint *)(ptr), arch) \ ) #define BLK_AVG(blk1, blk2) ((blk1+blk2) >> 1) #ifdef __KERNEL__ /* * get client id from packed copy. * * this hack is here because the xlog_pack code copies four bytes * of xlog_op_header containing the fields oh_clientid, oh_flags * and oh_res2 into the packed copy. * * later on this four byte chunk is treated as an int and the * client id is pulled out. * * this has endian issues, of course. */ #ifndef XFS_NATIVE_HOST #define GET_CLIENT_ID(i,arch) \ ((i) & 0xff) #else #define GET_CLIENT_ID(i,arch) \ ((i) >> 24) #endif #define GRANT_LOCK(log) mutex_spinlock(&(log)->l_grant_lock) #define GRANT_UNLOCK(log, s) mutex_spinunlock(&(log)->l_grant_lock, s) #define xlog_panic(args...) cmn_err(CE_PANIC, ## args) #define xlog_exit(args...) cmn_err(CE_PANIC, ## args) #define xlog_warn(args...) cmn_err(CE_WARN, ## args) /* * In core log state */ #define XLOG_STATE_ACTIVE 0x0001 /* Current IC log being written to */ #define XLOG_STATE_WANT_SYNC 0x0002 /* Want to sync this iclog; no more writes */ #define XLOG_STATE_SYNCING 0x0004 /* This IC log is syncing */ #define XLOG_STATE_DONE_SYNC 0x0008 /* Done syncing to disk */ #define XLOG_STATE_DO_CALLBACK \ 0x0010 /* Process callback functions */ #define XLOG_STATE_CALLBACK 0x0020 /* Callback functions now */ #define XLOG_STATE_DIRTY 0x0040 /* Dirty IC log, not ready for ACTIVE status*/ #define XLOG_STATE_IOERROR 0x0080 /* IO error happened in sync'ing log */ #define XLOG_STATE_ALL 0x7FFF /* All possible valid flags */ #define XLOG_STATE_NOTUSED 0x8000 /* This IC log not being used */ #endif /* __KERNEL__ */ /* * Flags to log operation header * * The first write of a new transaction will be preceded with a start * record, XLOG_START_TRANS. Once a transaction is committed, a commit * record is written, XLOG_COMMIT_TRANS. If a single region can not fit into * the remainder of the current active in-core log, it is split up into * multiple regions. Each partial region will be marked with a * XLOG_CONTINUE_TRANS until the last one, which gets marked with XLOG_END_TRANS. * */ #define XLOG_START_TRANS 0x01 /* Start a new transaction */ #define XLOG_COMMIT_TRANS 0x02 /* Commit this transaction */ #define XLOG_CONTINUE_TRANS 0x04 /* Cont this trans into new region */ #define XLOG_WAS_CONT_TRANS 0x08 /* Cont this trans into new region */ #define XLOG_END_TRANS 0x10 /* End a continued transaction */ #define XLOG_UNMOUNT_TRANS 0x20 /* Unmount a filesystem transaction */ #ifdef __KERNEL__ /* * Flags to log ticket */ #define XLOG_TIC_INITED 0x1 /* has been initialized */ #define XLOG_TIC_PERM_RESERV 0x2 /* permanent reservation */ #define XLOG_TIC_IN_Q 0x4 #endif /* __KERNEL__ */ #define XLOG_UNMOUNT_TYPE 0x556e /* Un for Unmount */ /* * Flags for log structure */ #define XLOG_CHKSUM_MISMATCH 0x1 /* used only during recovery */ #define XLOG_ACTIVE_RECOVERY 0x2 /* in the middle of recovery */ #define XLOG_RECOVERY_NEEDED 0x4 /* log was recovered */ #define XLOG_IO_ERROR 0x8 /* log hit an I/O error, and being shutdown */ typedef __uint32_t xlog_tid_t; #ifdef __KERNEL__ /* * Below are states for covering allocation transactions. * By covering, we mean changing the h_tail_lsn in the last on-disk * log write such that no allocation transactions will be re-done during * recovery after a system crash. Recovery starts at the last on-disk * log write. * * These states are used to insert dummy log entries to cover * space allocation transactions which can undo non-transactional changes * after a crash. Writes to a file with space * already allocated do not result in any transactions. Allocations * might include space beyond the EOF. So if we just push the EOF a * little, the last transaction for the file could contain the wrong * size. If there is no file system activity, after an allocation * transaction, and the system crashes, the allocation transaction * will get replayed and the file will be truncated. This could * be hours/days/... after the allocation occurred. * * The fix for this is to do two dummy transactions when the * system is idle. We need two dummy transaction because the h_tail_lsn * in the log record header needs to point beyond the last possible * non-dummy transaction. The first dummy changes the h_tail_lsn to * the first transaction before the dummy. The second dummy causes * h_tail_lsn to point to the first dummy. Recovery starts at h_tail_lsn. * * These dummy transactions get committed when everything * is idle (after there has been some activity). * * There are 5 states used to control this. * * IDLE -- no logging has been done on the file system or * we are done covering previous transactions. * NEED -- logging has occurred and we need a dummy transaction * when the log becomes idle. * DONE -- we were in the NEED state and have committed a dummy * transaction. * NEED2 -- we detected that a dummy transaction has gone to the * on disk log with no other transactions. * DONE2 -- we committed a dummy transaction when in the NEED2 state. * * There are two places where we switch states: * * 1.) In xfs_sync, when we detect an idle log and are in NEED or NEED2. * We commit the dummy transaction and switch to DONE or DONE2, * respectively. In all other states, we don't do anything. * * 2.) When we finish writing the on-disk log (xlog_state_clean_log). * * No matter what state we are in, if this isn't the dummy * transaction going out, the next state is NEED. * So, if we aren't in the DONE or DONE2 states, the next state * is NEED. We can't be finishing a write of the dummy record * unless it was committed and the state switched to DONE or DONE2. * * If we are in the DONE state and this was a write of the * dummy transaction, we move to NEED2. * * If we are in the DONE2 state and this was a write of the * dummy transaction, we move to IDLE. * * * Writing only one dummy transaction can get appended to * one file space allocation. When this happens, the log recovery * code replays the space allocation and a file could be truncated. * This is why we have the NEED2 and DONE2 states before going idle. */ #define XLOG_STATE_COVER_IDLE 0 #define XLOG_STATE_COVER_NEED 1 #define XLOG_STATE_COVER_DONE 2 #define XLOG_STATE_COVER_NEED2 3 #define XLOG_STATE_COVER_DONE2 4 #define XLOG_COVER_OPS 5 /* Ticket reservation region accounting */ #define XLOG_TIC_LEN_MAX 15 /* * Reservation region * As would be stored in xfs_log_iovec but without the i_addr which * we don't care about. */ typedef struct xlog_res { uint r_len; /* region length :4 */ uint r_type; /* region's transaction type :4 */ } xlog_res_t; typedef struct xlog_ticket { sv_t t_sema; /* sleep on this semaphore : 20 */ struct xlog_ticket *t_next; /* :4|8 */ struct xlog_ticket *t_prev; /* :4|8 */ xlog_tid_t t_tid; /* transaction identifier : 4 */ int t_curr_res; /* current reservation in bytes : 4 */ int t_unit_res; /* unit reservation in bytes : 4 */ char t_ocnt; /* original count : 1 */ char t_cnt; /* current count : 1 */ char t_clientid; /* who does this belong to; : 1 */ char t_flags; /* properties of reservation : 1 */ uint t_trans_type; /* transaction type : 4 */ /* reservation array fields */ uint t_res_num; /* num in array : 4 */ uint t_res_num_ophdrs; /* num op hdrs : 4 */ uint t_res_arr_sum; /* array sum : 4 */ uint t_res_o_flow; /* sum overflow : 4 */ xlog_res_t t_res_arr[XLOG_TIC_LEN_MAX]; /* array of res : 8 * 15 */ } xlog_ticket_t; #endif typedef struct xlog_op_header { xlog_tid_t oh_tid; /* transaction id of operation : 4 b */ int oh_len; /* bytes in data region : 4 b */ __uint8_t oh_clientid; /* who sent me this : 1 b */ __uint8_t oh_flags; /* : 1 b */ ushort oh_res2; /* 32 bit align : 2 b */ } xlog_op_header_t; /* valid values for h_fmt */ #define XLOG_FMT_UNKNOWN 0 #define XLOG_FMT_LINUX_LE 1 #define XLOG_FMT_LINUX_BE 2 #define XLOG_FMT_IRIX_BE 3 /* our fmt */ #ifdef XFS_NATIVE_HOST #define XLOG_FMT XLOG_FMT_LINUX_BE #else #define XLOG_FMT XLOG_FMT_LINUX_LE #endif typedef struct xlog_rec_header { uint h_magicno; /* log record (LR) identifier : 4 */ uint h_cycle; /* write cycle of log : 4 */ int h_version; /* LR version : 4 */ int h_len; /* len in bytes; should be 64-bit aligned: 4 */ xfs_lsn_t h_lsn; /* lsn of this LR : 8 */ xfs_lsn_t h_tail_lsn; /* lsn of 1st LR w/ buffers not committed: 8 */ uint h_chksum; /* may not be used; non-zero if used : 4 */ int h_prev_block; /* block number to previous LR : 4 */ int h_num_logops; /* number of log operations in this LR : 4 */ uint h_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE]; /* new fields */ int h_fmt; /* format of log record : 4 */ uuid_t h_fs_uuid; /* uuid of FS : 16 */ int h_size; /* iclog size : 4 */ } xlog_rec_header_t; typedef struct xlog_rec_ext_header { uint xh_cycle; /* write cycle of log : 4 */ uint xh_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE]; /* : 256 */ } xlog_rec_ext_header_t; #ifdef __KERNEL__ /* * - A log record header is 512 bytes. There is plenty of room to grow the * xlog_rec_header_t into the reserved space. * - ic_data follows, so a write to disk can start at the beginning of * the iclog. * - ic_forcesema is used to implement synchronous forcing of the iclog to disk. * - ic_next is the pointer to the next iclog in the ring. * - ic_bp is a pointer to the buffer used to write this incore log to disk. * - ic_log is a pointer back to the global log structure. * - ic_callback is a linked list of callback function/argument pairs to be * called after an iclog finishes writing. * - ic_size is the full size of the header plus data. * - ic_offset is the current number of bytes written to in this iclog. * - ic_refcnt is bumped when someone is writing to the log. * - ic_state is the state of the iclog. */ typedef struct xlog_iclog_fields { sv_t ic_forcesema; sv_t ic_writesema; struct xlog_in_core *ic_next; struct xlog_in_core *ic_prev; struct xfs_buf *ic_bp; struct log *ic_log; xfs_log_callback_t *ic_callback; xfs_log_callback_t **ic_callback_tail; #ifdef XFS_LOG_TRACE struct ktrace *ic_trace; #endif int ic_size; int ic_offset; int ic_refcnt; int ic_bwritecnt; ushort_t ic_state; char *ic_datap; /* pointer to iclog data */ } xlog_iclog_fields_t; typedef union xlog_in_core2 { xlog_rec_header_t hic_header; xlog_rec_ext_header_t hic_xheader; char hic_sector[XLOG_HEADER_SIZE]; } xlog_in_core_2_t; typedef struct xlog_in_core { xlog_iclog_fields_t hic_fields; xlog_in_core_2_t *hic_data; } xlog_in_core_t; /* * Defines to save our code from this glop. */ #define ic_forcesema hic_fields.ic_forcesema #define ic_writesema hic_fields.ic_writesema #define ic_next hic_fields.ic_next #define ic_prev hic_fields.ic_prev #define ic_bp hic_fields.ic_bp #define ic_log hic_fields.ic_log #define ic_callback hic_fields.ic_callback #define ic_callback_tail hic_fields.ic_callback_tail #define ic_trace hic_fields.ic_trace #define ic_size hic_fields.ic_size #define ic_offset hic_fields.ic_offset #define ic_refcnt hic_fields.ic_refcnt #define ic_bwritecnt hic_fields.ic_bwritecnt #define ic_state hic_fields.ic_state #define ic_datap hic_fields.ic_datap #define ic_header hic_data->hic_header /* * The reservation head lsn is not made up of a cycle number and block number. * Instead, it uses a cycle number and byte number. Logs don't expect to * overflow 31 bits worth of byte offset, so using a byte number will mean * that round off problems won't occur when releasing partial reservations. */ typedef struct log { /* The following block of fields are changed while holding icloglock */ sema_t l_flushsema; /* iclog flushing semaphore */ int l_flushcnt; /* # of procs waiting on this * sema */ int l_ticket_cnt; /* free ticket count */ int l_ticket_tcnt; /* total ticket count */ int l_covered_state;/* state of "covering disk * log entries" */ xlog_ticket_t *l_freelist; /* free list of tickets */ xlog_ticket_t *l_unmount_free;/* kmem_free these addresses */ xlog_ticket_t *l_tail; /* free list of tickets */ xlog_in_core_t *l_iclog; /* head log queue */ spinlock_t l_icloglock; /* grab to change iclog state */ xfs_lsn_t l_tail_lsn; /* lsn of 1st LR with unflushed * buffers */ xfs_lsn_t l_last_sync_lsn;/* lsn of last LR on disk */ struct xfs_mount *l_mp; /* mount point */ struct xfs_buf *l_xbuf; /* extra buffer for log * wrapping */ struct xfs_buftarg *l_targ; /* buftarg of log */ xfs_daddr_t l_logBBstart; /* start block of log */ int l_logsize; /* size of log in bytes */ int l_logBBsize; /* size of log in BB chunks */ int l_curr_cycle; /* Cycle number of log writes */ int l_prev_cycle; /* Cycle number before last * block increment */ int l_curr_block; /* current logical log block */ int l_prev_block; /* previous logical log block */ int l_iclog_size; /* size of log in bytes */ int l_iclog_size_log; /* log power size of log */ int l_iclog_bufs; /* number of iclog buffers */ /* The following field are used for debugging; need to hold icloglock */ char *l_iclog_bak[XLOG_MAX_ICLOGS]; /* The following block of fields are changed while holding grant_lock */ lock_t l_grant_lock; xlog_ticket_t *l_reserve_headq; xlog_ticket_t *l_write_headq; int l_grant_reserve_cycle; int l_grant_reserve_bytes; int l_grant_write_cycle; int l_grant_write_bytes; /* The following fields don't need locking */ #ifdef XFS_LOG_TRACE struct ktrace *l_trace; struct ktrace *l_grant_trace; #endif uint l_flags; uint l_quotaoffs_flag; /* XFS_DQ_*, for QUOTAOFFs */ struct xfs_buf_cancel **l_buf_cancel_table; int l_iclog_hsize; /* size of iclog header */ int l_iclog_heads; /* # of iclog header sectors */ uint l_sectbb_log; /* log2 of sector size in BBs */ uint l_sectbb_mask; /* sector size (in BBs) * alignment mask */ } xlog_t; #define XLOG_FORCED_SHUTDOWN(log) ((log)->l_flags & XLOG_IO_ERROR) /* common routines */ extern xfs_lsn_t xlog_assign_tail_lsn(struct xfs_mount *mp); extern int xlog_find_tail(xlog_t *log, xfs_daddr_t *head_blk, xfs_daddr_t *tail_blk); extern int xlog_recover(xlog_t *log); extern int xlog_recover_finish(xlog_t *log, int mfsi_flags); extern void xlog_pack_data(xlog_t *log, xlog_in_core_t *iclog, int); extern void xlog_recover_process_iunlinks(xlog_t *log); extern struct xfs_buf *xlog_get_bp(xlog_t *, int); extern void xlog_put_bp(struct xfs_buf *); extern int xlog_bread(xlog_t *, xfs_daddr_t, int, struct xfs_buf *); /* iclog tracing */ #define XLOG_TRACE_GRAB_FLUSH 1 #define XLOG_TRACE_REL_FLUSH 2 #define XLOG_TRACE_SLEEP_FLUSH 3 #define XLOG_TRACE_WAKE_FLUSH 4 /* * Unmount record type is used as a pseudo transaction type for the ticket. * It's value must be outside the range of XFS_TRANS_* values. */ #define XLOG_UNMOUNT_REC_TYPE (-1U) #endif /* __KERNEL__ */ #endif /* __XFS_LOG_PRIV_H__ */