/* * spcp8x5 USB to serial adaptor driver * * Copyright (C) 2010 Johan Hovold (jhovold@gmail.com) * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn) * Copyright (C) 2006 S1 Corp. * * Original driver for 2.6.10 pl2303 driver by * Greg Kroah-Hartman (greg@kroah.com) * Changes for 2.6.20 by Harald Klein * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * */ #include #include #include #include #include #include #include #include #include #include #include #define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" #define SPCP8x5_007_VID 0x04FC #define SPCP8x5_007_PID 0x0201 #define SPCP8x5_008_VID 0x04fc #define SPCP8x5_008_PID 0x0235 #define SPCP8x5_PHILIPS_VID 0x0471 #define SPCP8x5_PHILIPS_PID 0x081e #define SPCP8x5_INTERMATIC_VID 0x04FC #define SPCP8x5_INTERMATIC_PID 0x0204 #define SPCP8x5_835_VID 0x04fc #define SPCP8x5_835_PID 0x0231 static const struct usb_device_id id_table[] = { { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)}, { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)}, { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)}, { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)}, { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID)}, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); struct spcp8x5_usb_ctrl_arg { u8 type; u8 cmd; u8 cmd_type; u16 value; u16 index; u16 length; }; /* spcp8x5 spec register define */ #define MCR_CONTROL_LINE_RTS 0x02 #define MCR_CONTROL_LINE_DTR 0x01 #define MCR_DTR 0x01 #define MCR_RTS 0x02 #define MSR_STATUS_LINE_DCD 0x80 #define MSR_STATUS_LINE_RI 0x40 #define MSR_STATUS_LINE_DSR 0x20 #define MSR_STATUS_LINE_CTS 0x10 /* verdor command here , we should define myself */ #define SET_DEFAULT 0x40 #define SET_DEFAULT_TYPE 0x20 #define SET_UART_FORMAT 0x40 #define SET_UART_FORMAT_TYPE 0x21 #define SET_UART_FORMAT_SIZE_5 0x00 #define SET_UART_FORMAT_SIZE_6 0x01 #define SET_UART_FORMAT_SIZE_7 0x02 #define SET_UART_FORMAT_SIZE_8 0x03 #define SET_UART_FORMAT_STOP_1 0x00 #define SET_UART_FORMAT_STOP_2 0x04 #define SET_UART_FORMAT_PAR_NONE 0x00 #define SET_UART_FORMAT_PAR_ODD 0x10 #define SET_UART_FORMAT_PAR_EVEN 0x30 #define SET_UART_FORMAT_PAR_MASK 0xD0 #define SET_UART_FORMAT_PAR_SPACE 0x90 #define GET_UART_STATUS_TYPE 0xc0 #define GET_UART_STATUS 0x22 #define GET_UART_STATUS_MSR 0x06 #define SET_UART_STATUS 0x40 #define SET_UART_STATUS_TYPE 0x23 #define SET_UART_STATUS_MCR 0x0004 #define SET_UART_STATUS_MCR_DTR 0x01 #define SET_UART_STATUS_MCR_RTS 0x02 #define SET_UART_STATUS_MCR_LOOP 0x10 #define SET_WORKING_MODE 0x40 #define SET_WORKING_MODE_TYPE 0x24 #define SET_WORKING_MODE_U2C 0x00 #define SET_WORKING_MODE_RS485 0x01 #define SET_WORKING_MODE_PDMA 0x02 #define SET_WORKING_MODE_SPP 0x03 #define SET_FLOWCTL_CHAR 0x40 #define SET_FLOWCTL_CHAR_TYPE 0x25 #define GET_VERSION 0xc0 #define GET_VERSION_TYPE 0x26 #define SET_REGISTER 0x40 #define SET_REGISTER_TYPE 0x27 #define GET_REGISTER 0xc0 #define GET_REGISTER_TYPE 0x28 #define SET_RAM 0x40 #define SET_RAM_TYPE 0x31 #define GET_RAM 0xc0 #define GET_RAM_TYPE 0x32 /* how come ??? */ #define UART_STATE 0x08 #define UART_STATE_TRANSIENT_MASK 0x75 #define UART_DCD 0x01 #define UART_DSR 0x02 #define UART_BREAK_ERROR 0x04 #define UART_RING 0x08 #define UART_FRAME_ERROR 0x10 #define UART_PARITY_ERROR 0x20 #define UART_OVERRUN_ERROR 0x40 #define UART_CTS 0x80 enum spcp8x5_type { SPCP825_007_TYPE, SPCP825_008_TYPE, SPCP825_PHILIP_TYPE, SPCP825_INTERMATIC_TYPE, SPCP835_TYPE, }; struct spcp8x5_private { spinlock_t lock; enum spcp8x5_type type; wait_queue_head_t delta_msr_wait; u8 line_control; u8 line_status; }; static int spcp8x5_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct spcp8x5_private *priv; enum spcp8x5_type type = SPCP825_007_TYPE; u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); if (product == 0x0201) type = SPCP825_007_TYPE; else if (product == 0x0231) type = SPCP835_TYPE; else if (product == 0x0235) type = SPCP825_008_TYPE; else if (product == 0x0204) type = SPCP825_INTERMATIC_TYPE; else if (product == 0x0471 && serial->dev->descriptor.idVendor == cpu_to_le16(0x081e)) type = SPCP825_PHILIP_TYPE; dev_dbg(&serial->dev->dev, "device type = %d\n", (int)type); priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; spin_lock_init(&priv->lock); init_waitqueue_head(&priv->delta_msr_wait); priv->type = type; usb_set_serial_port_data(port , priv); return 0; } static int spcp8x5_port_remove(struct usb_serial_port *port) { struct spcp8x5_private *priv; priv = usb_get_serial_port_data(port); kfree(priv); return 0; } /* set the modem control line of the device. * NOTE spcp825-007 not supported this */ static int spcp8x5_set_ctrlLine(struct usb_device *dev, u8 value, enum spcp8x5_type type) { int retval; u8 mcr = 0 ; if (type == SPCP825_007_TYPE) return -EPERM; mcr = (unsigned short)value; retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), SET_UART_STATUS_TYPE, SET_UART_STATUS, mcr, 0x04, NULL, 0, 100); if (retval != 0) dev_dbg(&dev->dev, "usb_control_msg return %#x\n", retval); return retval; } /* get the modem status register of the device * NOTE spcp825-007 not supported this */ static int spcp8x5_get_msr(struct usb_device *dev, u8 *status, enum spcp8x5_type type) { u8 *status_buffer; int ret; /* I return Permited not support here but seem inval device * is more fix */ if (type == SPCP825_007_TYPE) return -EPERM; if (status == NULL) return -EINVAL; status_buffer = kmalloc(1, GFP_KERNEL); if (!status_buffer) return -ENOMEM; status_buffer[0] = status[0]; ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), GET_UART_STATUS, GET_UART_STATUS_TYPE, 0, GET_UART_STATUS_MSR, status_buffer, 1, 100); if (ret < 0) dev_dbg(&dev->dev, "Get MSR = 0x%p failed (error = %d)", status_buffer, ret); dev_dbg(&dev->dev, "0xc0:0x22:0:6 %d - 0x%p ", ret, status_buffer); status[0] = status_buffer[0]; kfree(status_buffer); return ret; } /* select the work mode. * NOTE this function not supported by spcp825-007 */ static void spcp8x5_set_workMode(struct usb_device *dev, u16 value, u16 index, enum spcp8x5_type type) { int ret; /* I return Permited not support here but seem inval device * is more fix */ if (type == SPCP825_007_TYPE) return; ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), SET_WORKING_MODE_TYPE, SET_WORKING_MODE, value, index, NULL, 0, 100); dev_dbg(&dev->dev, "value = %#x , index = %#x\n", value, index); if (ret < 0) dev_dbg(&dev->dev, "RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret); } static int spcp8x5_carrier_raised(struct usb_serial_port *port) { struct spcp8x5_private *priv = usb_get_serial_port_data(port); if (priv->line_status & MSR_STATUS_LINE_DCD) return 1; return 0; } static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on) { struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; u8 control; spin_lock_irqsave(&priv->lock, flags); if (on) priv->line_control = MCR_CONTROL_LINE_DTR | MCR_CONTROL_LINE_RTS; else priv->line_control &= ~ (MCR_CONTROL_LINE_DTR | MCR_CONTROL_LINE_RTS); control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type); } static void spcp8x5_init_termios(struct tty_struct *tty) { /* for the 1st time call this function */ tty->termios = tty_std_termios; tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; tty->termios.c_ispeed = 115200; tty->termios.c_ospeed = 115200; } /* set the serial param for transfer. we should check if we really need to * transfer. if we set flow control we should do this too. */ static void spcp8x5_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct usb_serial *serial = port->serial; struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int cflag = tty->termios.c_cflag; unsigned int old_cflag = old_termios->c_cflag; unsigned short uartdata; unsigned char buf[2] = {0, 0}; int baud; int i; u8 control; /* check that they really want us to change something */ if (!tty_termios_hw_change(&tty->termios, old_termios)) return; /* set DTR/RTS active */ spin_lock_irqsave(&priv->lock, flags); control = priv->line_control; if ((old_cflag & CBAUD) == B0) { priv->line_control |= MCR_DTR; if (!(old_cflag & CRTSCTS)) priv->line_control |= MCR_RTS; } if (control != priv->line_control) { control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); spcp8x5_set_ctrlLine(serial->dev, control , priv->type); } else { spin_unlock_irqrestore(&priv->lock, flags); } /* Set Baud Rate */ baud = tty_get_baud_rate(tty); switch (baud) { case 300: buf[0] = 0x00; break; case 600: buf[0] = 0x01; break; case 1200: buf[0] = 0x02; break; case 2400: buf[0] = 0x03; break; case 4800: buf[0] = 0x04; break; case 9600: buf[0] = 0x05; break; case 19200: buf[0] = 0x07; break; case 38400: buf[0] = 0x09; break; case 57600: buf[0] = 0x0a; break; case 115200: buf[0] = 0x0b; break; case 230400: buf[0] = 0x0c; break; case 460800: buf[0] = 0x0d; break; case 921600: buf[0] = 0x0e; break; /* case 1200000: buf[0] = 0x0f; break; */ /* case 2400000: buf[0] = 0x10; break; */ case 3000000: buf[0] = 0x11; break; /* case 6000000: buf[0] = 0x12; break; */ case 0: case 1000000: buf[0] = 0x0b; break; default: dev_err(&port->dev, "spcp825 driver does not support the " "baudrate requested, using default of 9600.\n"); } /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */ if (cflag & CSIZE) { switch (cflag & CSIZE) { case CS5: buf[1] |= SET_UART_FORMAT_SIZE_5; break; case CS6: buf[1] |= SET_UART_FORMAT_SIZE_6; break; case CS7: buf[1] |= SET_UART_FORMAT_SIZE_7; break; default: case CS8: buf[1] |= SET_UART_FORMAT_SIZE_8; break; } } /* Set Stop bit2 : 0:1bit 1:2bit */ buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 : SET_UART_FORMAT_STOP_1; /* Set Parity bit3-4 01:Odd 11:Even */ if (cflag & PARENB) { buf[1] |= (cflag & PARODD) ? SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ; } else buf[1] |= SET_UART_FORMAT_PAR_NONE; uartdata = buf[0] | buf[1]<<8; i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), SET_UART_FORMAT_TYPE, SET_UART_FORMAT, uartdata, 0, NULL, 0, 100); if (i < 0) dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n", uartdata, i); dev_dbg(&port->dev, "0x21:0x40:0:0 %d\n", i); if (cflag & CRTSCTS) { /* enable hardware flow control */ spcp8x5_set_workMode(serial->dev, 0x000a, SET_WORKING_MODE_U2C, priv->type); } } /* open the serial port. do some usb system call. set termios and get the line * status of the device. */ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) { struct ktermios tmp_termios; struct usb_serial *serial = port->serial; struct spcp8x5_private *priv = usb_get_serial_port_data(port); int ret; unsigned long flags; u8 status = 0x30; /* status 0x30 means DSR and CTS = 1 other CDC RI and delta = 0 */ usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 0x09, 0x00, 0x01, 0x00, NULL, 0x00, 100); if (ret) return ret; spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type); /* Setup termios */ if (tty) spcp8x5_set_termios(tty, port, &tmp_termios); spcp8x5_get_msr(serial->dev, &status, priv->type); /* may be we should update uart status here but now we did not do */ spin_lock_irqsave(&priv->lock, flags); priv->line_status = status & 0xf0 ; spin_unlock_irqrestore(&priv->lock, flags); port->port.drain_delay = 256; return usb_serial_generic_open(tty, port); } static void spcp8x5_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; struct spcp8x5_private *priv = usb_get_serial_port_data(port); struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; unsigned long flags; u8 status; char tty_flag; /* get tty_flag from status */ tty_flag = TTY_NORMAL; spin_lock_irqsave(&priv->lock, flags); status = priv->line_status; priv->line_status &= ~UART_STATE_TRANSIENT_MASK; spin_unlock_irqrestore(&priv->lock, flags); /* wake up the wait for termios */ wake_up_interruptible(&priv->delta_msr_wait); if (!urb->actual_length) return; tty = tty_port_tty_get(&port->port); if (!tty) return; if (status & UART_STATE_TRANSIENT_MASK) { /* break takes precedence over parity, which takes precedence * over framing errors */ if (status & UART_BREAK_ERROR) tty_flag = TTY_BREAK; else if (status & UART_PARITY_ERROR) tty_flag = TTY_PARITY; else if (status & UART_FRAME_ERROR) tty_flag = TTY_FRAME; dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag); /* overrun is special, not associated with a char */ if (status & UART_OVERRUN_ERROR) tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); if (status & UART_DCD) usb_serial_handle_dcd_change(port, tty, priv->line_status & MSR_STATUS_LINE_DCD); } tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, urb->actual_length); tty_flip_buffer_push(tty); tty_kref_put(tty); } static int spcp8x5_wait_modem_info(struct usb_serial_port *port, unsigned int arg) { struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int prevstatus; unsigned int status; unsigned int changed; spin_lock_irqsave(&priv->lock, flags); prevstatus = priv->line_status; spin_unlock_irqrestore(&priv->lock, flags); while (1) { /* wake up in bulk read */ interruptible_sleep_on(&priv->delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; spin_lock_irqsave(&priv->lock, flags); status = priv->line_status; spin_unlock_irqrestore(&priv->lock, flags); changed = prevstatus^status; if (((arg & TIOCM_RNG) && (changed & MSR_STATUS_LINE_RI)) || ((arg & TIOCM_DSR) && (changed & MSR_STATUS_LINE_DSR)) || ((arg & TIOCM_CD) && (changed & MSR_STATUS_LINE_DCD)) || ((arg & TIOCM_CTS) && (changed & MSR_STATUS_LINE_CTS))) return 0; prevstatus = status; } /* NOTREACHED */ return 0; } static int spcp8x5_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__, port->number, cmd); switch (cmd) { case TIOCMIWAIT: dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, port->number); return spcp8x5_wait_modem_info(port, arg); default: dev_dbg(&port->dev, "%s not supported = 0x%04x", __func__, cmd); break; } return -ENOIOCTLCMD; } static int spcp8x5_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; u8 control; spin_lock_irqsave(&priv->lock, flags); if (set & TIOCM_RTS) priv->line_control |= MCR_RTS; if (set & TIOCM_DTR) priv->line_control |= MCR_DTR; if (clear & TIOCM_RTS) priv->line_control &= ~MCR_RTS; if (clear & TIOCM_DTR) priv->line_control &= ~MCR_DTR; control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type); } static int spcp8x5_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int mcr; unsigned int status; unsigned int result; spin_lock_irqsave(&priv->lock, flags); mcr = priv->line_control; status = priv->line_status; spin_unlock_irqrestore(&priv->lock, flags); result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) | ((status & MSR_STATUS_LINE_CTS) ? TIOCM_CTS : 0) | ((status & MSR_STATUS_LINE_DSR) ? TIOCM_DSR : 0) | ((status & MSR_STATUS_LINE_RI) ? TIOCM_RI : 0) | ((status & MSR_STATUS_LINE_DCD) ? TIOCM_CD : 0); return result; } /* All of the device info needed for the spcp8x5 SIO serial converter */ static struct usb_serial_driver spcp8x5_device = { .driver = { .owner = THIS_MODULE, .name = "SPCP8x5", }, .id_table = id_table, .num_ports = 1, .open = spcp8x5_open, .dtr_rts = spcp8x5_dtr_rts, .carrier_raised = spcp8x5_carrier_raised, .set_termios = spcp8x5_set_termios, .init_termios = spcp8x5_init_termios, .ioctl = spcp8x5_ioctl, .tiocmget = spcp8x5_tiocmget, .tiocmset = spcp8x5_tiocmset, .port_probe = spcp8x5_port_probe, .port_remove = spcp8x5_port_remove, .process_read_urb = spcp8x5_process_read_urb, }; static struct usb_serial_driver * const serial_drivers[] = { &spcp8x5_device, NULL }; module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL");