/****************************************************************************** * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * Copyright(c) 2016 - 2017 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, * USA * * The full GNU General Public License is included in this distribution * in the file called COPYING. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * * BSD LICENSE * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * Copyright(c) 2016 - 2017 Intel Deutschland GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *****************************************************************************/ #ifndef __iwl_trans_h__ #define __iwl_trans_h__ #include #include /* for page_address */ #include #include #include "iwl-debug.h" #include "iwl-config.h" #include "iwl-fw.h" #include "iwl-op-mode.h" #include "iwl-fw-api.h" /** * DOC: Transport layer - what is it ? * * The transport layer is the layer that deals with the HW directly. It provides * an abstraction of the underlying HW to the upper layer. The transport layer * doesn't provide any policy, algorithm or anything of this kind, but only * mechanisms to make the HW do something. It is not completely stateless but * close to it. * We will have an implementation for each different supported bus. */ /** * DOC: Life cycle of the transport layer * * The transport layer has a very precise life cycle. * * 1) A helper function is called during the module initialization and * registers the bus driver's ops with the transport's alloc function. * 2) Bus's probe calls to the transport layer's allocation functions. * Of course this function is bus specific. * 3) This allocation functions will spawn the upper layer which will * register mac80211. * * 4) At some point (i.e. mac80211's start call), the op_mode will call * the following sequence: * start_hw * start_fw * * 5) Then when finished (or reset): * stop_device * * 6) Eventually, the free function will be called. */ #define FH_RSCSR_FRAME_SIZE_MSK 0x00003FFF /* bits 0-13 */ #define FH_RSCSR_FRAME_INVALID 0x55550000 #define FH_RSCSR_FRAME_ALIGN 0x40 #define FH_RSCSR_RPA_EN BIT(25) #define FH_RSCSR_RXQ_POS 16 #define FH_RSCSR_RXQ_MASK 0x3F0000 struct iwl_rx_packet { /* * The first 4 bytes of the RX frame header contain both the RX frame * size and some flags. * Bit fields: * 31: flag flush RB request * 30: flag ignore TC (terminal counter) request * 29: flag fast IRQ request * 28-26: Reserved * 25: Offload enabled * 24: RPF enabled * 23: RSS enabled * 22: Checksum enabled * 21-16: RX queue * 15-14: Reserved * 13-00: RX frame size */ __le32 len_n_flags; struct iwl_cmd_header hdr; u8 data[]; } __packed; static inline u32 iwl_rx_packet_len(const struct iwl_rx_packet *pkt) { return le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; } static inline u32 iwl_rx_packet_payload_len(const struct iwl_rx_packet *pkt) { return iwl_rx_packet_len(pkt) - sizeof(pkt->hdr); } /** * enum CMD_MODE - how to send the host commands ? * * @CMD_ASYNC: Return right away and don't wait for the response * @CMD_WANT_SKB: Not valid with CMD_ASYNC. The caller needs the buffer of * the response. The caller needs to call iwl_free_resp when done. * @CMD_HIGH_PRIO: The command is high priority - it goes to the front of the * command queue, but after other high priority commands. Valid only * with CMD_ASYNC. * @CMD_SEND_IN_IDLE: The command should be sent even when the trans is idle. * @CMD_MAKE_TRANS_IDLE: The command response should mark the trans as idle. * @CMD_WAKE_UP_TRANS: The command response should wake up the trans * (i.e. mark it as non-idle). * @CMD_WANT_ASYNC_CALLBACK: the op_mode's async callback function must be * called after this command completes. Valid only with CMD_ASYNC. */ enum CMD_MODE { CMD_ASYNC = BIT(0), CMD_WANT_SKB = BIT(1), CMD_SEND_IN_RFKILL = BIT(2), CMD_HIGH_PRIO = BIT(3), CMD_SEND_IN_IDLE = BIT(4), CMD_MAKE_TRANS_IDLE = BIT(5), CMD_WAKE_UP_TRANS = BIT(6), CMD_WANT_ASYNC_CALLBACK = BIT(7), }; #define DEF_CMD_PAYLOAD_SIZE 320 /** * struct iwl_device_cmd * * For allocation of the command and tx queues, this establishes the overall * size of the largest command we send to uCode, except for commands that * aren't fully copied and use other TFD space. */ struct iwl_device_cmd { union { struct { struct iwl_cmd_header hdr; /* uCode API */ u8 payload[DEF_CMD_PAYLOAD_SIZE]; }; struct { struct iwl_cmd_header_wide hdr_wide; u8 payload_wide[DEF_CMD_PAYLOAD_SIZE - sizeof(struct iwl_cmd_header_wide) + sizeof(struct iwl_cmd_header)]; }; }; } __packed; #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd)) /* * number of transfer buffers (fragments) per transmit frame descriptor; * this is just the driver's idea, the hardware supports 20 */ #define IWL_MAX_CMD_TBS_PER_TFD 2 /** * enum iwl_hcmd_dataflag - flag for each one of the chunks of the command * * @IWL_HCMD_DFL_NOCOPY: By default, the command is copied to the host command's * ring. The transport layer doesn't map the command's buffer to DMA, but * rather copies it to a previously allocated DMA buffer. This flag tells * the transport layer not to copy the command, but to map the existing * buffer (that is passed in) instead. This saves the memcpy and allows * commands that are bigger than the fixed buffer to be submitted. * Note that a TFD entry after a NOCOPY one cannot be a normal copied one. * @IWL_HCMD_DFL_DUP: Only valid without NOCOPY, duplicate the memory for this * chunk internally and free it again after the command completes. This * can (currently) be used only once per command. * Note that a TFD entry after a DUP one cannot be a normal copied one. */ enum iwl_hcmd_dataflag { IWL_HCMD_DFL_NOCOPY = BIT(0), IWL_HCMD_DFL_DUP = BIT(1), }; /** * struct iwl_host_cmd - Host command to the uCode * * @data: array of chunks that composes the data of the host command * @resp_pkt: response packet, if %CMD_WANT_SKB was set * @_rx_page_order: (internally used to free response packet) * @_rx_page_addr: (internally used to free response packet) * @flags: can be CMD_* * @len: array of the lengths of the chunks in data * @dataflags: IWL_HCMD_DFL_* * @id: command id of the host command, for wide commands encoding the * version and group as well */ struct iwl_host_cmd { const void *data[IWL_MAX_CMD_TBS_PER_TFD]; struct iwl_rx_packet *resp_pkt; unsigned long _rx_page_addr; u32 _rx_page_order; u32 flags; u32 id; u16 len[IWL_MAX_CMD_TBS_PER_TFD]; u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD]; }; static inline void iwl_free_resp(struct iwl_host_cmd *cmd) { free_pages(cmd->_rx_page_addr, cmd->_rx_page_order); } struct iwl_rx_cmd_buffer { struct page *_page; int _offset; bool _page_stolen; u32 _rx_page_order; unsigned int truesize; }; static inline void *rxb_addr(struct iwl_rx_cmd_buffer *r) { return (void *)((unsigned long)page_address(r->_page) + r->_offset); } static inline int rxb_offset(struct iwl_rx_cmd_buffer *r) { return r->_offset; } static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r) { r->_page_stolen = true; get_page(r->_page); return r->_page; } static inline void iwl_free_rxb(struct iwl_rx_cmd_buffer *r) { __free_pages(r->_page, r->_rx_page_order); } #define MAX_NO_RECLAIM_CMDS 6 #define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) /* * Maximum number of HW queues the transport layer * currently supports */ #define IWL_MAX_HW_QUEUES 32 #define IWL_MAX_TVQM_QUEUES 512 #define IWL_MAX_TID_COUNT 8 #define IWL_MGMT_TID 15 #define IWL_FRAME_LIMIT 64 #define IWL_MAX_RX_HW_QUEUES 16 /** * enum iwl_wowlan_status - WoWLAN image/device status * @IWL_D3_STATUS_ALIVE: firmware is still running after resume * @IWL_D3_STATUS_RESET: device was reset while suspended */ enum iwl_d3_status { IWL_D3_STATUS_ALIVE, IWL_D3_STATUS_RESET, }; /** * enum iwl_trans_status: transport status flags * @STATUS_SYNC_HCMD_ACTIVE: a SYNC command is being processed * @STATUS_DEVICE_ENABLED: APM is enabled * @STATUS_TPOWER_PMI: the device might be asleep (need to wake it up) * @STATUS_INT_ENABLED: interrupts are enabled * @STATUS_RFKILL_HW: the actual HW state of the RF-kill switch * @STATUS_RFKILL_OPMODE: RF-kill state reported to opmode * @STATUS_FW_ERROR: the fw is in error state * @STATUS_TRANS_GOING_IDLE: shutting down the trans, only special commands * are sent * @STATUS_TRANS_IDLE: the trans is idle - general commands are not to be sent * @STATUS_TRANS_DEAD: trans is dead - avoid any read/write operation */ enum iwl_trans_status { STATUS_SYNC_HCMD_ACTIVE, STATUS_DEVICE_ENABLED, STATUS_TPOWER_PMI, STATUS_INT_ENABLED, STATUS_RFKILL_HW, STATUS_RFKILL_OPMODE, STATUS_FW_ERROR, STATUS_TRANS_GOING_IDLE, STATUS_TRANS_IDLE, STATUS_TRANS_DEAD, }; static inline int iwl_trans_get_rb_size_order(enum iwl_amsdu_size rb_size) { switch (rb_size) { case IWL_AMSDU_4K: return get_order(4 * 1024); case IWL_AMSDU_8K: return get_order(8 * 1024); case IWL_AMSDU_12K: return get_order(12 * 1024); default: WARN_ON(1); return -1; } } struct iwl_hcmd_names { u8 cmd_id; const char *const cmd_name; }; #define HCMD_NAME(x) \ { .cmd_id = x, .cmd_name = #x } struct iwl_hcmd_arr { const struct iwl_hcmd_names *arr; int size; }; #define HCMD_ARR(x) \ { .arr = x, .size = ARRAY_SIZE(x) } /** * struct iwl_trans_config - transport configuration * * @op_mode: pointer to the upper layer. * @cmd_queue: the index of the command queue. * Must be set before start_fw. * @cmd_fifo: the fifo for host commands * @cmd_q_wdg_timeout: the timeout of the watchdog timer for the command queue. * @no_reclaim_cmds: Some devices erroneously don't set the * SEQ_RX_FRAME bit on some notifications, this is the * list of such notifications to filter. Max length is * %MAX_NO_RECLAIM_CMDS. * @n_no_reclaim_cmds: # of commands in list * @rx_buf_size: RX buffer size needed for A-MSDUs * if unset 4k will be the RX buffer size * @bc_table_dword: set to true if the BC table expects the byte count to be * in DWORD (as opposed to bytes) * @scd_set_active: should the transport configure the SCD for HCMD queue * @sw_csum_tx: transport should compute the TCP checksum * @command_groups: array of command groups, each member is an array of the * commands in the group; for debugging only * @command_groups_size: number of command groups, to avoid illegal access * @sdio_adma_addr: the default address to set for the ADMA in SDIO mode until * we get the ALIVE from the uCode * @cb_data_offs: offset inside skb->cb to store transport data at, must have * space for at least two pointers */ struct iwl_trans_config { struct iwl_op_mode *op_mode; u8 cmd_queue; u8 cmd_fifo; unsigned int cmd_q_wdg_timeout; const u8 *no_reclaim_cmds; unsigned int n_no_reclaim_cmds; enum iwl_amsdu_size rx_buf_size; bool bc_table_dword; bool scd_set_active; bool sw_csum_tx; const struct iwl_hcmd_arr *command_groups; int command_groups_size; u32 sdio_adma_addr; u8 cb_data_offs; }; struct iwl_trans_dump_data { u32 len; u8 data[]; }; struct iwl_trans; struct iwl_trans_txq_scd_cfg { u8 fifo; u8 sta_id; u8 tid; bool aggregate; int frame_limit; }; /** * struct iwl_trans_ops - transport specific operations * * All the handlers MUST be implemented * * @start_hw: starts the HW. If low_power is true, the NIC needs to be taken * out of a low power state. From that point on, the HW can send * interrupts. May sleep. * @op_mode_leave: Turn off the HW RF kill indication if on * May sleep * @start_fw: allocates and inits all the resources for the transport * layer. Also kick a fw image. * May sleep * @fw_alive: called when the fw sends alive notification. If the fw provides * the SCD base address in SRAM, then provide it here, or 0 otherwise. * May sleep * @stop_device: stops the whole device (embedded CPU put to reset) and stops * the HW. If low_power is true, the NIC will be put in low power state. * From that point on, the HW will be stopped but will still issue an * interrupt if the HW RF kill switch is triggered. * This callback must do the right thing and not crash even if %start_hw() * was called but not &start_fw(). May sleep. * @d3_suspend: put the device into the correct mode for WoWLAN during * suspend. This is optional, if not implemented WoWLAN will not be * supported. This callback may sleep. * @d3_resume: resume the device after WoWLAN, enabling the opmode to * talk to the WoWLAN image to get its status. This is optional, if not * implemented WoWLAN will not be supported. This callback may sleep. * @send_cmd:send a host command. Must return -ERFKILL if RFkill is asserted. * If RFkill is asserted in the middle of a SYNC host command, it must * return -ERFKILL straight away. * May sleep only if CMD_ASYNC is not set * @tx: send an skb. The transport relies on the op_mode to zero the * the ieee80211_tx_info->driver_data. If the MPDU is an A-MSDU, all * the CSUM will be taken care of (TCP CSUM and IP header in case of * IPv4). If the MPDU is a single MSDU, the op_mode must compute the IP * header if it is IPv4. * Must be atomic * @reclaim: free packet until ssn. Returns a list of freed packets. * Must be atomic * @txq_enable: setup a queue. To setup an AC queue, use the * iwl_trans_ac_txq_enable wrapper. fw_alive must have been called before * this one. The op_mode must not configure the HCMD queue. The scheduler * configuration may be %NULL, in which case the hardware will not be * configured. May sleep. * @txq_disable: de-configure a Tx queue to send AMPDUs * Must be atomic * @txq_set_shared_mode: change Tx queue shared/unshared marking * @wait_tx_queues_empty: wait until tx queues are empty. May sleep. * @wait_txq_empty: wait until specific tx queue is empty. May sleep. * @freeze_txq_timer: prevents the timer of the queue from firing until the * queue is set to awake. Must be atomic. * @block_txq_ptrs: stop updating the write pointers of the Tx queues. Note * that the transport needs to refcount the calls since this function * will be called several times with block = true, and then the queues * need to be unblocked only after the same number of calls with * block = false. * @write8: write a u8 to a register at offset ofs from the BAR * @write32: write a u32 to a register at offset ofs from the BAR * @read32: read a u32 register at offset ofs from the BAR * @read_prph: read a DWORD from a periphery register * @write_prph: write a DWORD to a periphery register * @read_mem: read device's SRAM in DWORD * @write_mem: write device's SRAM in DWORD. If %buf is %NULL, then the memory * will be zeroed. * @configure: configure parameters required by the transport layer from * the op_mode. May be called several times before start_fw, can't be * called after that. * @set_pmi: set the power pmi state * @grab_nic_access: wake the NIC to be able to access non-HBUS regs. * Sleeping is not allowed between grab_nic_access and * release_nic_access. * @release_nic_access: let the NIC go to sleep. The "flags" parameter * must be the same one that was sent before to the grab_nic_access. * @set_bits_mask - set SRAM register according to value and mask. * @ref: grab a reference to the transport/FW layers, disallowing * certain low power states * @unref: release a reference previously taken with @ref. Note that * initially the reference count is 1, making an initial @unref * necessary to allow low power states. * @dump_data: return a vmalloc'ed buffer with debug data, maybe containing last * TX'ed commands and similar. The buffer will be vfree'd by the caller. * Note that the transport must fill in the proper file headers. */ struct iwl_trans_ops { int (*start_hw)(struct iwl_trans *iwl_trans, bool low_power); void (*op_mode_leave)(struct iwl_trans *iwl_trans); int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw, bool run_in_rfkill); int (*update_sf)(struct iwl_trans *trans, struct iwl_sf_region *st_fwrd_space); void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr); void (*stop_device)(struct iwl_trans *trans, bool low_power); void (*d3_suspend)(struct iwl_trans *trans, bool test, bool reset); int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status, bool test, bool reset); int (*send_cmd)(struct iwl_trans *trans, struct iwl_host_cmd *cmd); int (*tx)(struct iwl_trans *trans, struct sk_buff *skb, struct iwl_device_cmd *dev_cmd, int queue); void (*reclaim)(struct iwl_trans *trans, int queue, int ssn, struct sk_buff_head *skbs); void (*txq_enable)(struct iwl_trans *trans, int queue, u16 ssn, const struct iwl_trans_txq_scd_cfg *cfg, unsigned int queue_wdg_timeout); void (*txq_disable)(struct iwl_trans *trans, int queue, bool configure_scd); /* a000 functions */ int (*txq_alloc)(struct iwl_trans *trans, struct iwl_tx_queue_cfg_cmd *cmd, int cmd_id, unsigned int queue_wdg_timeout); void (*txq_free)(struct iwl_trans *trans, int queue); void (*txq_set_shared_mode)(struct iwl_trans *trans, u32 txq_id, bool shared); int (*wait_tx_queues_empty)(struct iwl_trans *trans, u32 txq_bm); int (*wait_txq_empty)(struct iwl_trans *trans, int queue); void (*freeze_txq_timer)(struct iwl_trans *trans, unsigned long txqs, bool freeze); void (*block_txq_ptrs)(struct iwl_trans *trans, bool block); void (*write8)(struct iwl_trans *trans, u32 ofs, u8 val); void (*write32)(struct iwl_trans *trans, u32 ofs, u32 val); u32 (*read32)(struct iwl_trans *trans, u32 ofs); u32 (*read_prph)(struct iwl_trans *trans, u32 ofs); void (*write_prph)(struct iwl_trans *trans, u32 ofs, u32 val); int (*read_mem)(struct iwl_trans *trans, u32 addr, void *buf, int dwords); int (*write_mem)(struct iwl_trans *trans, u32 addr, const void *buf, int dwords); void (*configure)(struct iwl_trans *trans, const struct iwl_trans_config *trans_cfg); void (*set_pmi)(struct iwl_trans *trans, bool state); bool (*grab_nic_access)(struct iwl_trans *trans, unsigned long *flags); void (*release_nic_access)(struct iwl_trans *trans, unsigned long *flags); void (*set_bits_mask)(struct iwl_trans *trans, u32 reg, u32 mask, u32 value); void (*ref)(struct iwl_trans *trans); void (*unref)(struct iwl_trans *trans); int (*suspend)(struct iwl_trans *trans); void (*resume)(struct iwl_trans *trans); struct iwl_trans_dump_data *(*dump_data)(struct iwl_trans *trans, const struct iwl_fw_dbg_trigger_tlv *trigger); }; /** * enum iwl_trans_state - state of the transport layer * * @IWL_TRANS_NO_FW: no fw has sent an alive response * @IWL_TRANS_FW_ALIVE: a fw has sent an alive response */ enum iwl_trans_state { IWL_TRANS_NO_FW = 0, IWL_TRANS_FW_ALIVE = 1, }; /** * DOC: Platform power management * * There are two types of platform power management: system-wide * (WoWLAN) and runtime. * * In system-wide power management the entire platform goes into a low * power state (e.g. idle or suspend to RAM) at the same time and the * device is configured as a wakeup source for the entire platform. * This is usually triggered by userspace activity (e.g. the user * presses the suspend button or a power management daemon decides to * put the platform in low power mode). The device's behavior in this * mode is dictated by the wake-on-WLAN configuration. * * In runtime power management, only the devices which are themselves * idle enter a low power state. This is done at runtime, which means * that the entire system is still running normally. This mode is * usually triggered automatically by the device driver and requires * the ability to enter and exit the low power modes in a very short * time, so there is not much impact in usability. * * The terms used for the device's behavior are as follows: * * - D0: the device is fully powered and the host is awake; * - D3: the device is in low power mode and only reacts to * specific events (e.g. magic-packet received or scan * results found); * - D0I3: the device is in low power mode and reacts to any * activity (e.g. RX); * * These terms reflect the power modes in the firmware and are not to * be confused with the physical device power state. The NIC can be * in D0I3 mode even if, for instance, the PCI device is in D3 state. */ /** * enum iwl_plat_pm_mode - platform power management mode * * This enumeration describes the device's platform power management * behavior when in idle mode (i.e. runtime power management) or when * in system-wide suspend (i.e WoWLAN). * * @IWL_PLAT_PM_MODE_DISABLED: power management is disabled for this * device. At runtime, this means that nothing happens and the * device always remains in active. In system-wide suspend mode, * it means that the all connections will be closed automatically * by mac80211 before the platform is suspended. * @IWL_PLAT_PM_MODE_D3: the device goes into D3 mode (i.e. WoWLAN). * For runtime power management, this mode is not officially * supported. * @IWL_PLAT_PM_MODE_D0I3: the device goes into D0I3 mode. */ enum iwl_plat_pm_mode { IWL_PLAT_PM_MODE_DISABLED, IWL_PLAT_PM_MODE_D3, IWL_PLAT_PM_MODE_D0I3, }; /* Max time to wait for trans to become idle/non-idle on d0i3 * enter/exit (in msecs). */ #define IWL_TRANS_IDLE_TIMEOUT 2000 /** * struct iwl_trans - transport common data * * @ops - pointer to iwl_trans_ops * @op_mode - pointer to the op_mode * @cfg - pointer to the configuration * @drv - pointer to iwl_drv * @status: a bit-mask of transport status flags * @dev - pointer to struct device * that represents the device * @max_skb_frags: maximum number of fragments an SKB can have when transmitted. * 0 indicates that frag SKBs (NETIF_F_SG) aren't supported. * @hw_rf_id a u32 with the device RF ID * @hw_id: a u32 with the ID of the device / sub-device. * Set during transport allocation. * @hw_id_str: a string with info about HW ID. Set during transport allocation. * @pm_support: set to true in start_hw if link pm is supported * @ltr_enabled: set to true if the LTR is enabled * @wide_cmd_header: true when ucode supports wide command header format * @num_rx_queues: number of RX queues allocated by the transport; * the transport must set this before calling iwl_drv_start() * @dev_cmd_pool: pool for Tx cmd allocation - for internal use only. * The user should use iwl_trans_{alloc,free}_tx_cmd. * @rx_mpdu_cmd: MPDU RX command ID, must be assigned by opmode before * starting the firmware, used for tracing * @rx_mpdu_cmd_hdr_size: used for tracing, amount of data before the * start of the 802.11 header in the @rx_mpdu_cmd * @dflt_pwr_limit: default power limit fetched from the platform (ACPI) * @dbg_dest_tlv: points to the destination TLV for debug * @dbg_conf_tlv: array of pointers to configuration TLVs for debug * @dbg_trigger_tlv: array of pointers to triggers TLVs for debug * @dbg_dest_reg_num: num of reg_ops in %dbg_dest_tlv * @paging_req_addr: The location were the FW will upload / download the pages * from. The address is set by the opmode * @paging_db: Pointer to the opmode paging data base, the pointer is set by * the opmode. * @paging_download_buf: Buffer used for copying all of the pages before * downloading them to the FW. The buffer is allocated in the opmode * @system_pm_mode: the system-wide power management mode in use. * This mode is set dynamically, depending on the WoWLAN values * configured from the userspace at runtime. * @runtime_pm_mode: the runtime power management mode in use. This * mode is set during the initialization phase and is not * supposed to change during runtime. */ struct iwl_trans { const struct iwl_trans_ops *ops; struct iwl_op_mode *op_mode; const struct iwl_cfg *cfg; struct iwl_drv *drv; enum iwl_trans_state state; unsigned long status; struct device *dev; u32 max_skb_frags; u32 hw_rev; u32 hw_rf_id; u32 hw_id; char hw_id_str[52]; u8 rx_mpdu_cmd, rx_mpdu_cmd_hdr_size; bool pm_support; bool ltr_enabled; const struct iwl_hcmd_arr *command_groups; int command_groups_size; bool wide_cmd_header; u8 num_rx_queues; /* The following fields are internal only */ struct kmem_cache *dev_cmd_pool; char dev_cmd_pool_name[50]; struct dentry *dbgfs_dir; #ifdef CONFIG_LOCKDEP struct lockdep_map sync_cmd_lockdep_map; #endif u64 dflt_pwr_limit; const struct iwl_fw_dbg_dest_tlv *dbg_dest_tlv; const struct iwl_fw_dbg_conf_tlv *dbg_conf_tlv[FW_DBG_CONF_MAX]; struct iwl_fw_dbg_trigger_tlv * const *dbg_trigger_tlv; u8 dbg_dest_reg_num; /* * Paging parameters - All of the parameters should be set by the * opmode when paging is enabled */ u32 paging_req_addr; struct iwl_fw_paging *paging_db; void *paging_download_buf; enum iwl_plat_pm_mode system_pm_mode; enum iwl_plat_pm_mode runtime_pm_mode; bool suspending; /* pointer to trans specific struct */ /*Ensure that this pointer will always be aligned to sizeof pointer */ char trans_specific[0] __aligned(sizeof(void *)); }; const char *iwl_get_cmd_string(struct iwl_trans *trans, u32 id); int iwl_cmd_groups_verify_sorted(const struct iwl_trans_config *trans); static inline void iwl_trans_configure(struct iwl_trans *trans, const struct iwl_trans_config *trans_cfg) { trans->op_mode = trans_cfg->op_mode; trans->ops->configure(trans, trans_cfg); WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg)); } static inline int _iwl_trans_start_hw(struct iwl_trans *trans, bool low_power) { might_sleep(); return trans->ops->start_hw(trans, low_power); } static inline int iwl_trans_start_hw(struct iwl_trans *trans) { return trans->ops->start_hw(trans, true); } static inline void iwl_trans_op_mode_leave(struct iwl_trans *trans) { might_sleep(); if (trans->ops->op_mode_leave) trans->ops->op_mode_leave(trans); trans->op_mode = NULL; trans->state = IWL_TRANS_NO_FW; } static inline void iwl_trans_fw_alive(struct iwl_trans *trans, u32 scd_addr) { might_sleep(); trans->state = IWL_TRANS_FW_ALIVE; trans->ops->fw_alive(trans, scd_addr); } static inline int iwl_trans_start_fw(struct iwl_trans *trans, const struct fw_img *fw, bool run_in_rfkill) { might_sleep(); WARN_ON_ONCE(!trans->rx_mpdu_cmd); clear_bit(STATUS_FW_ERROR, &trans->status); return trans->ops->start_fw(trans, fw, run_in_rfkill); } static inline int iwl_trans_update_sf(struct iwl_trans *trans, struct iwl_sf_region *st_fwrd_space) { might_sleep(); if (trans->ops->update_sf) return trans->ops->update_sf(trans, st_fwrd_space); return 0; } static inline void _iwl_trans_stop_device(struct iwl_trans *trans, bool low_power) { might_sleep(); trans->ops->stop_device(trans, low_power); trans->state = IWL_TRANS_NO_FW; } static inline void iwl_trans_stop_device(struct iwl_trans *trans) { _iwl_trans_stop_device(trans, true); } static inline void iwl_trans_d3_suspend(struct iwl_trans *trans, bool test, bool reset) { might_sleep(); if (trans->ops->d3_suspend) trans->ops->d3_suspend(trans, test, reset); } static inline int iwl_trans_d3_resume(struct iwl_trans *trans, enum iwl_d3_status *status, bool test, bool reset) { might_sleep(); if (!trans->ops->d3_resume) return 0; return trans->ops->d3_resume(trans, status, test, reset); } static inline void iwl_trans_ref(struct iwl_trans *trans) { if (trans->ops->ref) trans->ops->ref(trans); } static inline void iwl_trans_unref(struct iwl_trans *trans) { if (trans->ops->unref) trans->ops->unref(trans); } static inline int iwl_trans_suspend(struct iwl_trans *trans) { if (!trans->ops->suspend) return 0; return trans->ops->suspend(trans); } static inline void iwl_trans_resume(struct iwl_trans *trans) { if (trans->ops->resume) trans->ops->resume(trans); } static inline struct iwl_trans_dump_data * iwl_trans_dump_data(struct iwl_trans *trans, const struct iwl_fw_dbg_trigger_tlv *trigger) { if (!trans->ops->dump_data) return NULL; return trans->ops->dump_data(trans, trigger); } static inline struct iwl_device_cmd * iwl_trans_alloc_tx_cmd(struct iwl_trans *trans) { return kmem_cache_alloc(trans->dev_cmd_pool, GFP_ATOMIC); } int iwl_trans_send_cmd(struct iwl_trans *trans, struct iwl_host_cmd *cmd); static inline void iwl_trans_free_tx_cmd(struct iwl_trans *trans, struct iwl_device_cmd *dev_cmd) { kmem_cache_free(trans->dev_cmd_pool, dev_cmd); } static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb, struct iwl_device_cmd *dev_cmd, int queue) { if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status))) return -EIO; if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); return -EIO; } return trans->ops->tx(trans, skb, dev_cmd, queue); } static inline void iwl_trans_reclaim(struct iwl_trans *trans, int queue, int ssn, struct sk_buff_head *skbs) { if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); return; } trans->ops->reclaim(trans, queue, ssn, skbs); } static inline void iwl_trans_txq_disable(struct iwl_trans *trans, int queue, bool configure_scd) { trans->ops->txq_disable(trans, queue, configure_scd); } static inline void iwl_trans_txq_enable_cfg(struct iwl_trans *trans, int queue, u16 ssn, const struct iwl_trans_txq_scd_cfg *cfg, unsigned int queue_wdg_timeout) { might_sleep(); if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); return; } trans->ops->txq_enable(trans, queue, ssn, cfg, queue_wdg_timeout); } static inline void iwl_trans_txq_free(struct iwl_trans *trans, int queue) { if (WARN_ON_ONCE(!trans->ops->txq_free)) return; trans->ops->txq_free(trans, queue); } static inline int iwl_trans_txq_alloc(struct iwl_trans *trans, struct iwl_tx_queue_cfg_cmd *cmd, int cmd_id, unsigned int queue_wdg_timeout) { might_sleep(); if (WARN_ON_ONCE(!trans->ops->txq_alloc)) return -ENOTSUPP; if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); return -EIO; } return trans->ops->txq_alloc(trans, cmd, cmd_id, queue_wdg_timeout); } static inline void iwl_trans_txq_set_shared_mode(struct iwl_trans *trans, int queue, bool shared_mode) { if (trans->ops->txq_set_shared_mode) trans->ops->txq_set_shared_mode(trans, queue, shared_mode); } static inline void iwl_trans_txq_enable(struct iwl_trans *trans, int queue, int fifo, int sta_id, int tid, int frame_limit, u16 ssn, unsigned int queue_wdg_timeout) { struct iwl_trans_txq_scd_cfg cfg = { .fifo = fifo, .sta_id = sta_id, .tid = tid, .frame_limit = frame_limit, .aggregate = sta_id >= 0, }; iwl_trans_txq_enable_cfg(trans, queue, ssn, &cfg, queue_wdg_timeout); } static inline void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue, int fifo, unsigned int queue_wdg_timeout) { struct iwl_trans_txq_scd_cfg cfg = { .fifo = fifo, .sta_id = -1, .tid = IWL_MAX_TID_COUNT, .frame_limit = IWL_FRAME_LIMIT, .aggregate = false, }; iwl_trans_txq_enable_cfg(trans, queue, 0, &cfg, queue_wdg_timeout); } static inline void iwl_trans_freeze_txq_timer(struct iwl_trans *trans, unsigned long txqs, bool freeze) { if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); return; } if (trans->ops->freeze_txq_timer) trans->ops->freeze_txq_timer(trans, txqs, freeze); } static inline void iwl_trans_block_txq_ptrs(struct iwl_trans *trans, bool block) { if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); return; } if (trans->ops->block_txq_ptrs) trans->ops->block_txq_ptrs(trans, block); } static inline int iwl_trans_wait_tx_queues_empty(struct iwl_trans *trans, u32 txqs) { if (WARN_ON_ONCE(!trans->ops->wait_tx_queues_empty)) return -ENOTSUPP; if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); return -EIO; } return trans->ops->wait_tx_queues_empty(trans, txqs); } static inline int iwl_trans_wait_txq_empty(struct iwl_trans *trans, int queue) { if (WARN_ON_ONCE(!trans->ops->wait_txq_empty)) return -ENOTSUPP; if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); return -EIO; } return trans->ops->wait_txq_empty(trans, queue); } static inline void iwl_trans_write8(struct iwl_trans *trans, u32 ofs, u8 val) { trans->ops->write8(trans, ofs, val); } static inline void iwl_trans_write32(struct iwl_trans *trans, u32 ofs, u32 val) { trans->ops->write32(trans, ofs, val); } static inline u32 iwl_trans_read32(struct iwl_trans *trans, u32 ofs) { return trans->ops->read32(trans, ofs); } static inline u32 iwl_trans_read_prph(struct iwl_trans *trans, u32 ofs) { return trans->ops->read_prph(trans, ofs); } static inline void iwl_trans_write_prph(struct iwl_trans *trans, u32 ofs, u32 val) { return trans->ops->write_prph(trans, ofs, val); } static inline int iwl_trans_read_mem(struct iwl_trans *trans, u32 addr, void *buf, int dwords) { return trans->ops->read_mem(trans, addr, buf, dwords); } #define iwl_trans_read_mem_bytes(trans, addr, buf, bufsize) \ do { \ if (__builtin_constant_p(bufsize)) \ BUILD_BUG_ON((bufsize) % sizeof(u32)); \ iwl_trans_read_mem(trans, addr, buf, (bufsize) / sizeof(u32));\ } while (0) static inline u32 iwl_trans_read_mem32(struct iwl_trans *trans, u32 addr) { u32 value; if (WARN_ON(iwl_trans_read_mem(trans, addr, &value, 1))) return 0xa5a5a5a5; return value; } static inline int iwl_trans_write_mem(struct iwl_trans *trans, u32 addr, const void *buf, int dwords) { return trans->ops->write_mem(trans, addr, buf, dwords); } static inline u32 iwl_trans_write_mem32(struct iwl_trans *trans, u32 addr, u32 val) { return iwl_trans_write_mem(trans, addr, &val, 1); } static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state) { if (trans->ops->set_pmi) trans->ops->set_pmi(trans, state); } static inline void iwl_trans_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value) { trans->ops->set_bits_mask(trans, reg, mask, value); } #define iwl_trans_grab_nic_access(trans, flags) \ __cond_lock(nic_access, \ likely((trans)->ops->grab_nic_access(trans, flags))) static inline void __releases(nic_access) iwl_trans_release_nic_access(struct iwl_trans *trans, unsigned long *flags) { trans->ops->release_nic_access(trans, flags); __release(nic_access); } static inline void iwl_trans_fw_error(struct iwl_trans *trans) { if (WARN_ON_ONCE(!trans->op_mode)) return; /* prevent double restarts due to the same erroneous FW */ if (!test_and_set_bit(STATUS_FW_ERROR, &trans->status)) iwl_op_mode_nic_error(trans->op_mode); } /***************************************************** * transport helper functions *****************************************************/ struct iwl_trans *iwl_trans_alloc(unsigned int priv_size, struct device *dev, const struct iwl_cfg *cfg, const struct iwl_trans_ops *ops); void iwl_trans_free(struct iwl_trans *trans); /***************************************************** * driver (transport) register/unregister functions ******************************************************/ int __must_check iwl_pci_register_driver(void); void iwl_pci_unregister_driver(void); #endif /* __iwl_trans_h__ */