/* bnx2x_sp.h: Broadcom Everest network driver. * * Copyright 2011 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you * under the terms of the GNU General Public License version 2, available * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL"). * * Notwithstanding the above, under no circumstances may you combine this * software in any way with any other Broadcom software provided under a * license other than the GPL, without Broadcom's express prior written * consent. * * Maintained by: Eilon Greenstein * Written by: Vladislav Zolotarov * */ #ifndef BNX2X_SP_VERBS #define BNX2X_SP_VERBS struct bnx2x; struct eth_context; /* Bits representing general command's configuration */ enum { RAMROD_TX, RAMROD_RX, /* Wait until all pending commands complete */ RAMROD_COMP_WAIT, /* Don't send a ramrod, only update a registry */ RAMROD_DRV_CLR_ONLY, /* Configure HW according to the current object state */ RAMROD_RESTORE, /* Execute the next command now */ RAMROD_EXEC, /* * Don't add a new command and continue execution of posponed * commands. If not set a new command will be added to the * pending commands list. */ RAMROD_CONT, }; typedef enum { BNX2X_OBJ_TYPE_RX, BNX2X_OBJ_TYPE_TX, BNX2X_OBJ_TYPE_RX_TX, } bnx2x_obj_type; /* Filtering states */ enum { BNX2X_FILTER_MAC_PENDING, BNX2X_FILTER_VLAN_PENDING, BNX2X_FILTER_VLAN_MAC_PENDING, BNX2X_FILTER_RX_MODE_PENDING, BNX2X_FILTER_RX_MODE_SCHED, BNX2X_FILTER_ISCSI_ETH_START_SCHED, BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, BNX2X_FILTER_FCOE_ETH_START_SCHED, BNX2X_FILTER_FCOE_ETH_STOP_SCHED, BNX2X_FILTER_MCAST_PENDING, BNX2X_FILTER_MCAST_SCHED, BNX2X_FILTER_RSS_CONF_PENDING, }; struct bnx2x_raw_obj { u8 func_id; /* Queue params */ u8 cl_id; u32 cid; /* Ramrod data buffer params */ void *rdata; dma_addr_t rdata_mapping; /* Ramrod state params */ int state; /* "ramrod is pending" state bit */ unsigned long *pstate; /* pointer to state buffer */ bnx2x_obj_type obj_type; int (*wait_comp)(struct bnx2x *bp, struct bnx2x_raw_obj *o); bool (*check_pending)(struct bnx2x_raw_obj *o); void (*clear_pending)(struct bnx2x_raw_obj *o); void (*set_pending)(struct bnx2x_raw_obj *o); }; /************************* VLAN-MAC commands related parameters ***************/ struct bnx2x_mac_ramrod_data { u8 mac[ETH_ALEN]; }; struct bnx2x_vlan_ramrod_data { u16 vlan; }; struct bnx2x_vlan_mac_ramrod_data { u8 mac[ETH_ALEN]; u16 vlan; }; union bnx2x_classification_ramrod_data { struct bnx2x_mac_ramrod_data mac; struct bnx2x_vlan_ramrod_data vlan; struct bnx2x_vlan_mac_ramrod_data vlan_mac; }; /* VLAN_MAC commands */ enum bnx2x_vlan_mac_cmd { BNX2X_VLAN_MAC_ADD, BNX2X_VLAN_MAC_DEL, BNX2X_VLAN_MAC_MOVE, }; struct bnx2x_vlan_mac_data { /* Requested command: BNX2X_VLAN_MAC_XX */ enum bnx2x_vlan_mac_cmd cmd; /* * used to contain the data related vlan_mac_flags bits from * ramrod parameters. */ unsigned long vlan_mac_flags; /* Needed for MOVE command */ struct bnx2x_vlan_mac_obj *target_obj; union bnx2x_classification_ramrod_data u; }; /*************************** Exe Queue obj ************************************/ union bnx2x_exe_queue_cmd_data { struct bnx2x_vlan_mac_data vlan_mac; struct { /* TODO */ } mcast; }; struct bnx2x_exeq_elem { struct list_head link; /* Length of this element in the exe_chunk. */ int cmd_len; union bnx2x_exe_queue_cmd_data cmd_data; }; union bnx2x_qable_obj; union bnx2x_exeq_comp_elem { union event_ring_elem *elem; }; struct bnx2x_exe_queue_obj; typedef int (*exe_q_validate)(struct bnx2x *bp, union bnx2x_qable_obj *o, struct bnx2x_exeq_elem *elem); /** * @return positive is entry was optimized, 0 - if not, negative * in case of an error. */ typedef int (*exe_q_optimize)(struct bnx2x *bp, union bnx2x_qable_obj *o, struct bnx2x_exeq_elem *elem); typedef int (*exe_q_execute)(struct bnx2x *bp, union bnx2x_qable_obj *o, struct list_head *exe_chunk, unsigned long *ramrod_flags); typedef struct bnx2x_exeq_elem * (*exe_q_get)(struct bnx2x_exe_queue_obj *o, struct bnx2x_exeq_elem *elem); struct bnx2x_exe_queue_obj { /* * Commands pending for an execution. */ struct list_head exe_queue; /* * Commands pending for an completion. */ struct list_head pending_comp; spinlock_t lock; /* Maximum length of commands' list for one execution */ int exe_chunk_len; union bnx2x_qable_obj *owner; /****** Virtual functions ******/ /** * Called before commands execution for commands that are really * going to be executed (after 'optimize'). * * Must run under exe_queue->lock */ exe_q_validate validate; /** * This will try to cancel the current pending commands list * considering the new command. * * Must run under exe_queue->lock */ exe_q_optimize optimize; /** * Run the next commands chunk (owner specific). */ exe_q_execute execute; /** * Return the exe_queue element containing the specific command * if any. Otherwise return NULL. */ exe_q_get get; }; /***************** Classification verbs: Set/Del MAC/VLAN/VLAN-MAC ************/ /* * Element in the VLAN_MAC registry list having all currenty configured * rules. */ struct bnx2x_vlan_mac_registry_elem { struct list_head link; /* * Used to store the cam offset used for the mac/vlan/vlan-mac. * Relevant for 57710 and 57711 only. VLANs and MACs share the * same CAM for these chips. */ int cam_offset; /* Needed for DEL and RESTORE flows */ unsigned long vlan_mac_flags; union bnx2x_classification_ramrod_data u; }; /* Bits representing VLAN_MAC commands specific flags */ enum { BNX2X_UC_LIST_MAC, BNX2X_ETH_MAC, BNX2X_ISCSI_ETH_MAC, BNX2X_NETQ_ETH_MAC, BNX2X_DONT_CONSUME_CAM_CREDIT, BNX2X_DONT_CONSUME_CAM_CREDIT_DEST, }; struct bnx2x_vlan_mac_ramrod_params { /* Object to run the command from */ struct bnx2x_vlan_mac_obj *vlan_mac_obj; /* General command flags: COMP_WAIT, etc. */ unsigned long ramrod_flags; /* Command specific configuration request */ struct bnx2x_vlan_mac_data user_req; }; struct bnx2x_vlan_mac_obj { struct bnx2x_raw_obj raw; /* Bookkeeping list: will prevent the addition of already existing * entries. */ struct list_head head; /* TODO: Add it's initialization in the init functions */ struct bnx2x_exe_queue_obj exe_queue; /* MACs credit pool */ struct bnx2x_credit_pool_obj *macs_pool; /* VLANs credit pool */ struct bnx2x_credit_pool_obj *vlans_pool; /* RAMROD command to be used */ int ramrod_cmd; /** * Checks if ADD-ramrod with the given params may be performed. * * @return zero if the element may be added */ int (*check_add)(struct bnx2x_vlan_mac_obj *o, union bnx2x_classification_ramrod_data *data); /** * Checks if DEL-ramrod with the given params may be performed. * * @return true if the element may be deleted */ struct bnx2x_vlan_mac_registry_elem * (*check_del)(struct bnx2x_vlan_mac_obj *o, union bnx2x_classification_ramrod_data *data); /** * Checks if DEL-ramrod with the given params may be performed. * * @return true if the element may be deleted */ bool (*check_move)(struct bnx2x_vlan_mac_obj *src_o, struct bnx2x_vlan_mac_obj *dst_o, union bnx2x_classification_ramrod_data *data); /** * Update the relevant credit object(s) (consume/return * correspondingly). */ bool (*get_credit)(struct bnx2x_vlan_mac_obj *o); bool (*put_credit)(struct bnx2x_vlan_mac_obj *o); bool (*get_cam_offset)(struct bnx2x_vlan_mac_obj *o, int *offset); bool (*put_cam_offset)(struct bnx2x_vlan_mac_obj *o, int offset); /** * Configures one rule in the ramrod data buffer. */ void (*set_one_rule)(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o, struct bnx2x_exeq_elem *elem, int rule_idx, int cam_offset); /** * Delete all configured elements having the given * vlan_mac_flags specification. Assumes no pending for * execution commands. Will schedule all all currently * configured MACs/VLANs/VLAN-MACs matching the vlan_mac_flags * specification for deletion and will use the given * ramrod_flags for the last DEL operation. * * @param bp * @param o * @param ramrod_flags RAMROD_XX flags * * @return 0 if the last operation has completed successfully * and there are no more elements left, positive value * if there are pending for completion commands, * negative value in case of failure. */ int (*delete_all)(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o, unsigned long *vlan_mac_flags, unsigned long *ramrod_flags); /** * Reconfigures the next MAC/VLAN/VLAN-MAC element from the previously * configured elements list. * * @param bp * @param p Command parameters (RAMROD_COMP_WAIT bit in * ramrod_flags is only taken into an account) * @param ppos a pointer to the cooky that should be given back in the * next call to make function handle the next element. If * *ppos is set to NULL it will restart the iterator. * If returned *ppos == NULL this means that the last * element has been handled. * * @return int */ int (*restore)(struct bnx2x *bp, struct bnx2x_vlan_mac_ramrod_params *p, struct bnx2x_vlan_mac_registry_elem **ppos); /** * Should be called on a completion arival. * * @param bp * @param o * @param cqe Completion element we are handling * @param ramrod_flags if RAMROD_CONT is set the next bulk of * pending commands will be executed. * RAMROD_DRV_CLR_ONLY and RAMROD_RESTORE * may also be set if needed. * * @return 0 if there are neither pending nor waiting for * completion commands. Positive value if there are * pending for execution or for completion commands. * Negative value in case of an error (including an * error in the cqe). */ int (*complete)(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o, union event_ring_elem *cqe, unsigned long *ramrod_flags); /** * Wait for completion of all commands. Don't schedule new ones, * just wait. It assumes that the completion code will schedule * for new commands. */ int (*wait)(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o); }; /** RX_MODE verbs:DROP_ALL/ACCEPT_ALL/ACCEPT_ALL_MULTI/ACCEPT_ALL_VLAN/NORMAL */ /* RX_MODE ramrod spesial flags: set in rx_mode_flags field in * a bnx2x_rx_mode_ramrod_params. */ enum { BNX2X_RX_MODE_FCOE_ETH, BNX2X_RX_MODE_ISCSI_ETH, }; enum { BNX2X_ACCEPT_UNICAST, BNX2X_ACCEPT_MULTICAST, BNX2X_ACCEPT_ALL_UNICAST, BNX2X_ACCEPT_ALL_MULTICAST, BNX2X_ACCEPT_BROADCAST, BNX2X_ACCEPT_UNMATCHED, BNX2X_ACCEPT_ANY_VLAN }; struct bnx2x_rx_mode_ramrod_params { struct bnx2x_rx_mode_obj *rx_mode_obj; unsigned long *pstate; int state; u8 cl_id; u32 cid; u8 func_id; unsigned long ramrod_flags; unsigned long rx_mode_flags; /* * rdata is either a pointer to eth_filter_rules_ramrod_data(e2) or to * a tstorm_eth_mac_filter_config (e1x). */ void *rdata; dma_addr_t rdata_mapping; /* Rx mode settings */ unsigned long rx_accept_flags; /* internal switching settings */ unsigned long tx_accept_flags; }; struct bnx2x_rx_mode_obj { int (*config_rx_mode)(struct bnx2x *bp, struct bnx2x_rx_mode_ramrod_params *p); int (*wait_comp)(struct bnx2x *bp, struct bnx2x_rx_mode_ramrod_params *p); }; /********************** Set multicast group ***********************************/ struct bnx2x_mcast_list_elem { struct list_head link; u8 *mac; }; union bnx2x_mcast_config_data { u8 *mac; u8 bin; /* used in a RESTORE flow */ }; struct bnx2x_mcast_ramrod_params { struct bnx2x_mcast_obj *mcast_obj; /* Relevant options are RAMROD_COMP_WAIT and RAMROD_DRV_CLR_ONLY */ unsigned long ramrod_flags; struct list_head mcast_list; /* list of struct bnx2x_mcast_list_elem */ /** TODO: * - rename it to macs_num. * - Add a new command type for handling pending commands * (remove "zero semantics"). * * Length of mcast_list. If zero and ADD_CONT command - post * pending commands. */ int mcast_list_len; }; enum { BNX2X_MCAST_CMD_ADD, BNX2X_MCAST_CMD_CONT, BNX2X_MCAST_CMD_DEL, BNX2X_MCAST_CMD_RESTORE, }; struct bnx2x_mcast_obj { struct bnx2x_raw_obj raw; union { struct { #define BNX2X_MCAST_BINS_NUM 256 #define BNX2X_MCAST_VEC_SZ (BNX2X_MCAST_BINS_NUM / 64) u64 vec[BNX2X_MCAST_VEC_SZ]; /** Number of BINs to clear. Should be updated * immediately when a command arrives in order to * properly create DEL commands. */ int num_bins_set; } aprox_match; struct { struct list_head macs; int num_macs_set; } exact_match; } registry; /* Pending commands */ struct list_head pending_cmds_head; /* A state that is set in raw.pstate, when there are pending commands */ int sched_state; /* Maximal number of mcast MACs configured in one command */ int max_cmd_len; /* Total number of currently pending MACs to configure: both * in the pending commands list and in the current command. */ int total_pending_num; u8 engine_id; /** * @param cmd command to execute (BNX2X_MCAST_CMD_X, see above) */ int (*config_mcast)(struct bnx2x *bp, struct bnx2x_mcast_ramrod_params *p, int cmd); /** * Fills the ramrod data during the RESTORE flow. * * @param bp * @param o * @param start_idx Registry index to start from * @param rdata_idx Index in the ramrod data to start from * * @return -1 if we handled the whole registry or index of the last * handled registry element. */ int (*hdl_restore)(struct bnx2x *bp, struct bnx2x_mcast_obj *o, int start_bin, int *rdata_idx); int (*enqueue_cmd)(struct bnx2x *bp, struct bnx2x_mcast_obj *o, struct bnx2x_mcast_ramrod_params *p, int cmd); void (*set_one_rule)(struct bnx2x *bp, struct bnx2x_mcast_obj *o, int idx, union bnx2x_mcast_config_data *cfg_data, int cmd); /** Checks if there are more mcast MACs to be set or a previous * command is still pending. */ bool (*check_pending)(struct bnx2x_mcast_obj *o); /** * Set/Clear/Check SCHEDULED state of the object */ void (*set_sched)(struct bnx2x_mcast_obj *o); void (*clear_sched)(struct bnx2x_mcast_obj *o); bool (*check_sched)(struct bnx2x_mcast_obj *o); /* Wait until all pending commands complete */ int (*wait_comp)(struct bnx2x *bp, struct bnx2x_mcast_obj *o); /** * Handle the internal object counters needed for proper * commands handling. Checks that the provided parameters are * feasible. */ int (*validate)(struct bnx2x *bp, struct bnx2x_mcast_ramrod_params *p, int cmd); /** * Restore the values of internal counters in case of a failure. */ void (*revert)(struct bnx2x *bp, struct bnx2x_mcast_ramrod_params *p, int old_num_bins); int (*get_registry_size)(struct bnx2x_mcast_obj *o); void (*set_registry_size)(struct bnx2x_mcast_obj *o, int n); }; /*************************** Credit handling **********************************/ struct bnx2x_credit_pool_obj { /* Current amount of credit in the pool */ atomic_t credit; /* Maximum allowed credit. put() will check against it. */ int pool_sz; /* * Allocate a pool table statically. * * Currently the mamimum allowed size is MAX_MAC_CREDIT_E2(272) * * The set bit in the table will mean that the entry is available. */ #define BNX2X_POOL_VEC_SIZE (MAX_MAC_CREDIT_E2 / 64) u64 pool_mirror[BNX2X_POOL_VEC_SIZE]; /* Base pool offset (initialized differently */ int base_pool_offset; /** * Get the next free pool entry. * * @return true if there was a free entry in the pool */ bool (*get_entry)(struct bnx2x_credit_pool_obj *o, int *entry); /** * Return the entry back to the pool. * * @return true if entry is legal and has been successfully * returned to the pool. */ bool (*put_entry)(struct bnx2x_credit_pool_obj *o, int entry); /** * Get the requested amount of credit from the pool. * * @param cnt Amount of requested credit * @return true if the operation is successful */ bool (*get)(struct bnx2x_credit_pool_obj *o, int cnt); /** * Returns the credit to the pool. * * @param cnt Amount of credit to return * @return true if the operation is successful */ bool (*put)(struct bnx2x_credit_pool_obj *o, int cnt); /** * Reads the current amount of credit. */ int (*check)(struct bnx2x_credit_pool_obj *o); }; /*************************** RSS configuration ********************************/ enum { /* RSS_MODE bits are mutually exclusive */ BNX2X_RSS_MODE_DISABLED, BNX2X_RSS_MODE_REGULAR, BNX2X_RSS_MODE_VLAN_PRI, BNX2X_RSS_MODE_E1HOV_PRI, BNX2X_RSS_MODE_IP_DSCP, BNX2X_RSS_SET_SRCH, /* Setup searcher, E1x specific flag */ BNX2X_RSS_IPV4, BNX2X_RSS_IPV4_TCP, BNX2X_RSS_IPV6, BNX2X_RSS_IPV6_TCP, }; struct bnx2x_config_rss_params { struct bnx2x_rss_config_obj *rss_obj; /* may have RAMROD_COMP_WAIT set only */ unsigned long ramrod_flags; /* BNX2X_RSS_X bits */ unsigned long rss_flags; /* Number hash bits to take into an account */ u8 rss_result_mask; /* Indirection table */ u8 ind_table[T_ETH_INDIRECTION_TABLE_SIZE]; /* RSS hash values */ u32 rss_key[10]; /* valid only iff BNX2X_RSS_UPDATE_TOE is set */ u16 toe_rss_bitmap; }; struct bnx2x_rss_config_obj { struct bnx2x_raw_obj raw; /* RSS engine to use */ u8 engine_id; /* Last configured indirection table */ u8 ind_table[T_ETH_INDIRECTION_TABLE_SIZE]; int (*config_rss)(struct bnx2x *bp, struct bnx2x_config_rss_params *p); }; /*********************** Queue state update ***********************************/ /* UPDATE command options */ enum { BNX2X_Q_UPDATE_IN_VLAN_REM, BNX2X_Q_UPDATE_IN_VLAN_REM_CHNG, BNX2X_Q_UPDATE_OUT_VLAN_REM, BNX2X_Q_UPDATE_OUT_VLAN_REM_CHNG, BNX2X_Q_UPDATE_ANTI_SPOOF, BNX2X_Q_UPDATE_ANTI_SPOOF_CHNG, BNX2X_Q_UPDATE_ACTIVATE, BNX2X_Q_UPDATE_ACTIVATE_CHNG, BNX2X_Q_UPDATE_DEF_VLAN_EN, BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG, BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG, BNX2X_Q_UPDATE_SILENT_VLAN_REM }; /* Allowed Queue states */ enum bnx2x_q_state { BNX2X_Q_STATE_RESET, BNX2X_Q_STATE_INITIALIZED, BNX2X_Q_STATE_ACTIVE, BNX2X_Q_STATE_INACTIVE, BNX2X_Q_STATE_STOPPED, BNX2X_Q_STATE_TERMINATED, BNX2X_Q_STATE_FLRED, BNX2X_Q_STATE_MAX, }; /* Allowed commands */ enum bnx2x_queue_cmd { BNX2X_Q_CMD_INIT, BNX2X_Q_CMD_SETUP, BNX2X_Q_CMD_DEACTIVATE, BNX2X_Q_CMD_ACTIVATE, BNX2X_Q_CMD_UPDATE, BNX2X_Q_CMD_UPDATE_TPA, BNX2X_Q_CMD_HALT, BNX2X_Q_CMD_CFC_DEL, BNX2X_Q_CMD_TERMINATE, BNX2X_Q_CMD_EMPTY, BNX2X_Q_CMD_MAX, }; /* queue SETUP + INIT flags */ enum { BNX2X_Q_FLG_TPA, BNX2X_Q_FLG_STATS, BNX2X_Q_FLG_ZERO_STATS, BNX2X_Q_FLG_ACTIVE, BNX2X_Q_FLG_OV, BNX2X_Q_FLG_VLAN, BNX2X_Q_FLG_COS, BNX2X_Q_FLG_HC, BNX2X_Q_FLG_HC_EN, BNX2X_Q_FLG_DHC, BNX2X_Q_FLG_FCOE, BNX2X_Q_FLG_LEADING_RSS, BNX2X_Q_FLG_MCAST, BNX2X_Q_FLG_DEF_VLAN, BNX2X_Q_FLG_TX_SWITCH, BNX2X_Q_FLG_TX_SEC, BNX2X_Q_FLG_ANTI_SPOOF, BNX2X_Q_FLG_SILENT_VLAN_REM }; /* Queue type options: queue type may be a compination of below. */ enum bnx2x_q_type { /** TODO: Consider moving both these flags into the init() * ramrod params. */ BNX2X_Q_TYPE_HAS_RX, BNX2X_Q_TYPE_HAS_TX, }; struct bnx2x_queue_init_params { struct { unsigned long flags; u16 hc_rate; u8 fw_sb_id; u8 sb_cq_index; } tx; struct { unsigned long flags; u16 hc_rate; u8 fw_sb_id; u8 sb_cq_index; } rx; /* CID context in the host memory */ struct eth_context *cxt; }; struct bnx2x_queue_update_params { unsigned long update_flags; /* BNX2X_Q_UPDATE_XX bits */ u16 def_vlan; u16 silent_removal_value; u16 silent_removal_mask; }; struct rxq_pause_params { u16 bd_th_lo; u16 bd_th_hi; u16 rcq_th_lo; u16 rcq_th_hi; u16 sge_th_lo; /* valid iff BNX2X_Q_FLG_TPA */ u16 sge_th_hi; /* valid iff BNX2X_Q_FLG_TPA */ u16 pri_map; }; /* general */ struct bnx2x_general_setup_params { /* valid iff BNX2X_Q_FLG_STATS */ u8 stat_id; u8 spcl_id; u16 mtu; }; struct bnx2x_rxq_setup_params { /* dma */ dma_addr_t dscr_map; dma_addr_t sge_map; dma_addr_t rcq_map; dma_addr_t rcq_np_map; u16 drop_flags; u16 buf_sz; u8 fw_sb_id; u8 cl_qzone_id; /* valid iff BNX2X_Q_FLG_TPA */ u16 tpa_agg_sz; u16 sge_buf_sz; u8 max_sges_pkt; u8 max_tpa_queues; u8 rss_engine_id; u8 cache_line_log; u8 sb_cq_index; /* valid iff BXN2X_Q_FLG_SILENT_VLAN_REM */ u16 silent_removal_value; u16 silent_removal_mask; }; struct bnx2x_txq_setup_params { /* dma */ dma_addr_t dscr_map; u8 fw_sb_id; u8 sb_cq_index; u8 cos; /* valid iff BNX2X_Q_FLG_COS */ u16 traffic_type; /* equals to the leading rss client id, used for TX classification*/ u8 tss_leading_cl_id; /* valid iff BNX2X_Q_FLG_DEF_VLAN */ u16 default_vlan; }; struct bnx2x_queue_setup_params { struct rxq_pause_params pause; struct bnx2x_general_setup_params gen_params; struct bnx2x_rxq_setup_params rxq_params; struct bnx2x_txq_setup_params txq_params; unsigned long flags; }; struct bnx2x_queue_state_params { struct bnx2x_queue_sp_obj *q_obj; /* Current command */ enum bnx2x_queue_cmd cmd; /* may have RAMROD_COMP_WAIT set only */ unsigned long ramrod_flags; /* Params according to the current command */ union { struct bnx2x_queue_update_params update; struct bnx2x_queue_setup_params setup; struct bnx2x_queue_init_params init; } params; }; struct bnx2x_queue_sp_obj { u32 cid; u8 cl_id; u8 func_id; enum bnx2x_q_state state, next_state; /* bits from enum bnx2x_q_type */ unsigned long type; /* BNX2X_Q_CMD_XX bits. This object implements "one * pending" paradigm but for debug and tracing purposes it's * more convinient to have different bits for different * commands. */ unsigned long pending; /* Buffer to use as a ramrod data and its mapping */ void *rdata; dma_addr_t rdata_mapping; /** * Performs one state change according to the given parameters. * * @return 0 in case of success and negative value otherwise. */ int (*send_cmd)(struct bnx2x *bp, struct bnx2x_queue_state_params *params); /** * Sets the pending bit according to the requested transition. */ int (*set_pending)(struct bnx2x_queue_sp_obj *o, struct bnx2x_queue_state_params *params); /** * Checks that the requested state transition is legal. */ int (*check_transition)(struct bnx2x *bp, struct bnx2x_queue_sp_obj *o, struct bnx2x_queue_state_params *params); /** * Completes the pending command. */ int (*complete_cmd)(struct bnx2x *bp, struct bnx2x_queue_sp_obj *o, enum bnx2x_queue_cmd); int (*wait_comp)(struct bnx2x *bp, struct bnx2x_queue_sp_obj *o, enum bnx2x_queue_cmd cmd); }; /********************** Function state update *********************************/ /* Allowed Function states */ enum bnx2x_func_state { BNX2X_F_STATE_RESET, BNX2X_F_STATE_INITIALIZED, BNX2X_F_STATE_STARTED, BNX2X_F_STATE_MAX, }; /* Allowed Function commands */ enum bnx2x_func_cmd { BNX2X_F_CMD_HW_INIT, BNX2X_F_CMD_START, BNX2X_F_CMD_STOP, BNX2X_F_CMD_HW_RESET, BNX2X_F_CMD_MAX, }; struct bnx2x_func_hw_init_params { /* A load phase returned by MCP. * * May be: * FW_MSG_CODE_DRV_LOAD_COMMON_CHIP * FW_MSG_CODE_DRV_LOAD_COMMON * FW_MSG_CODE_DRV_LOAD_PORT * FW_MSG_CODE_DRV_LOAD_FUNCTION */ u32 load_phase; }; struct bnx2x_func_hw_reset_params { /* A load phase returned by MCP. * * May be: * FW_MSG_CODE_DRV_LOAD_COMMON_CHIP * FW_MSG_CODE_DRV_LOAD_COMMON * FW_MSG_CODE_DRV_LOAD_PORT * FW_MSG_CODE_DRV_LOAD_FUNCTION */ u32 reset_phase; }; struct bnx2x_func_start_params { /* Multi Function mode: * - Single Function * - Switch Dependent * - Switch Independent */ u16 mf_mode; /* Switch Dependent mode outer VLAN tag */ u16 sd_vlan_tag; /* Function cos mode */ u8 network_cos_mode; }; struct bnx2x_func_state_params { struct bnx2x_func_sp_obj *f_obj; /* Current command */ enum bnx2x_func_cmd cmd; /* may have RAMROD_COMP_WAIT set only */ unsigned long ramrod_flags; /* Params according to the current command */ union { struct bnx2x_func_hw_init_params hw_init; struct bnx2x_func_hw_reset_params hw_reset; struct bnx2x_func_start_params start; } params; }; struct bnx2x_func_sp_drv_ops { /* Init tool + runtime initialization: * - Common Chip * - Common (per Path) * - Port * - Function phases */ int (*init_hw_cmn_chip)(struct bnx2x *bp); int (*init_hw_cmn)(struct bnx2x *bp); int (*init_hw_port)(struct bnx2x *bp); int (*init_hw_func)(struct bnx2x *bp); /* Reset Function HW: Common, Port, Function phases. */ void (*reset_hw_cmn)(struct bnx2x *bp); void (*reset_hw_port)(struct bnx2x *bp); void (*reset_hw_func)(struct bnx2x *bp); /* Init/Free GUNZIP resources */ int (*gunzip_init)(struct bnx2x *bp); void (*gunzip_end)(struct bnx2x *bp); /* Prepare/Release FW resources */ int (*init_fw)(struct bnx2x *bp); void (*release_fw)(struct bnx2x *bp); }; struct bnx2x_func_sp_obj { enum bnx2x_func_state state, next_state; /* BNX2X_FUNC_CMD_XX bits. This object implements "one * pending" paradigm but for debug and tracing purposes it's * more convinient to have different bits for different * commands. */ unsigned long pending; /* Buffer to use as a ramrod data and its mapping */ void *rdata; dma_addr_t rdata_mapping; /* this mutex validates that when pending flag is taken, the next * ramrod to be sent will be the one set the pending bit */ struct mutex one_pending_mutex; /* Driver interface */ struct bnx2x_func_sp_drv_ops *drv; /** * Performs one state change according to the given parameters. * * @return 0 in case of success and negative value otherwise. */ int (*send_cmd)(struct bnx2x *bp, struct bnx2x_func_state_params *params); /** * Checks that the requested state transition is legal. */ int (*check_transition)(struct bnx2x *bp, struct bnx2x_func_sp_obj *o, struct bnx2x_func_state_params *params); /** * Completes the pending command. */ int (*complete_cmd)(struct bnx2x *bp, struct bnx2x_func_sp_obj *o, enum bnx2x_func_cmd cmd); int (*wait_comp)(struct bnx2x *bp, struct bnx2x_func_sp_obj *o, enum bnx2x_func_cmd cmd); }; /********************** Interfaces ********************************************/ /* Queueable objects set */ union bnx2x_qable_obj { struct bnx2x_vlan_mac_obj vlan_mac; }; /************** Function state update *********/ void bnx2x_init_func_obj(struct bnx2x *bp, struct bnx2x_func_sp_obj *obj, void *rdata, dma_addr_t rdata_mapping, struct bnx2x_func_sp_drv_ops *drv_iface); int bnx2x_func_state_change(struct bnx2x *bp, struct bnx2x_func_state_params *params); /******************* Queue State **************/ void bnx2x_init_queue_obj(struct bnx2x *bp, struct bnx2x_queue_sp_obj *obj, u8 cl_id, u32 cid, u8 func_id, void *rdata, dma_addr_t rdata_mapping, unsigned long type); int bnx2x_queue_state_change(struct bnx2x *bp, struct bnx2x_queue_state_params *params); /********************* VLAN-MAC ****************/ void bnx2x_init_mac_obj(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *mac_obj, u8 cl_id, u32 cid, u8 func_id, void *rdata, dma_addr_t rdata_mapping, int state, unsigned long *pstate, bnx2x_obj_type type, struct bnx2x_credit_pool_obj *macs_pool); void bnx2x_init_vlan_obj(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *vlan_obj, u8 cl_id, u32 cid, u8 func_id, void *rdata, dma_addr_t rdata_mapping, int state, unsigned long *pstate, bnx2x_obj_type type, struct bnx2x_credit_pool_obj *vlans_pool); void bnx2x_init_vlan_mac_obj(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *vlan_mac_obj, u8 cl_id, u32 cid, u8 func_id, void *rdata, dma_addr_t rdata_mapping, int state, unsigned long *pstate, bnx2x_obj_type type, struct bnx2x_credit_pool_obj *macs_pool, struct bnx2x_credit_pool_obj *vlans_pool); int bnx2x_config_vlan_mac(struct bnx2x *bp, struct bnx2x_vlan_mac_ramrod_params *p); int bnx2x_vlan_mac_move(struct bnx2x *bp, struct bnx2x_vlan_mac_ramrod_params *p, struct bnx2x_vlan_mac_obj *dest_o); /********************* RX MODE ****************/ void bnx2x_init_rx_mode_obj(struct bnx2x *bp, struct bnx2x_rx_mode_obj *o); /** * Send and RX_MODE ramrod according to the provided parameters. * * @param bp * @param p Command parameters * * @return 0 - if operation was successfull and there is no pending completions, * positive number - if there are pending completions, * negative - if there were errors */ int bnx2x_config_rx_mode(struct bnx2x *bp, struct bnx2x_rx_mode_ramrod_params *p); /****************** MULTICASTS ****************/ void bnx2x_init_mcast_obj(struct bnx2x *bp, struct bnx2x_mcast_obj *mcast_obj, u8 mcast_cl_id, u32 mcast_cid, u8 func_id, u8 engine_id, void *rdata, dma_addr_t rdata_mapping, int state, unsigned long *pstate, bnx2x_obj_type type); /** * Configure multicast MACs list. May configure a new list * provided in p->mcast_list (BNX2X_MCAST_CMD_ADD), clean up * (BNX2X_MCAST_CMD_DEL) or restore (BNX2X_MCAST_CMD_RESTORE) a current * configuration, continue to execute the pending commands * (BNX2X_MCAST_CMD_CONT). * * If previous command is still pending or if number of MACs to * configure is more that maximum number of MACs in one command, * the current command will be enqueued to the tail of the * pending commands list. * * @param bp * @param p * @param command to execute: BNX2X_MCAST_CMD_X * * @return 0 is operation was sucessfull and there are no pending completions, * negative if there were errors, positive if there are pending * completions. */ int bnx2x_config_mcast(struct bnx2x *bp, struct bnx2x_mcast_ramrod_params *p, int cmd); /****************** CREDIT POOL ****************/ void bnx2x_init_mac_credit_pool(struct bnx2x *bp, struct bnx2x_credit_pool_obj *p, u8 func_id, u8 func_num); void bnx2x_init_vlan_credit_pool(struct bnx2x *bp, struct bnx2x_credit_pool_obj *p, u8 func_id, u8 func_num); /****************** RSS CONFIGURATION ****************/ void bnx2x_init_rss_config_obj(struct bnx2x *bp, struct bnx2x_rss_config_obj *rss_obj, u8 cl_id, u32 cid, u8 func_id, u8 engine_id, void *rdata, dma_addr_t rdata_mapping, int state, unsigned long *pstate, bnx2x_obj_type type); /** * Updates RSS configuration according to provided parameters. * * @param bp * @param p * * @return 0 in case of success */ int bnx2x_config_rss(struct bnx2x *bp, struct bnx2x_config_rss_params *p); /** * Return the current ind_table configuration. * * @param bp * @param ind_table buffer to fill with the current indirection * table content. Should be at least * T_ETH_INDIRECTION_TABLE_SIZE bytes long. */ void bnx2x_get_rss_ind_table(struct bnx2x_rss_config_obj *rss_obj, u8 *ind_table); #endif /* BNX2X_SP_VERBS */