/* * isp.c * * TI OMAP3 ISP - Core * * Copyright (C) 2006-2010 Nokia Corporation * Copyright (C) 2007-2009 Texas Instruments, Inc. * * Contacts: Laurent Pinchart * Sakari Ailus * * Contributors: * Laurent Pinchart * Sakari Ailus * David Cohen * Stanimir Varbanov * Vimarsh Zutshi * Tuukka Toivonen * Sergio Aguirre * Antti Koskipaa * Ivan T. Ivanov * RaniSuneela * Atanas Filipov * Gjorgji Rosikopulos * Hiroshi DOYU * Nayden Kanchev * Phil Carmody * Artem Bityutskiy * Dominic Curran * Ilkka Myllyperkio * Pallavi Kulkarni * Vaibhav Hiremath * Mohit Jalori * Sameer Venkatraman * Senthilvadivu Guruswamy * Thara Gopinath * Toni Leinonen * Troy Laramy * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA * 02110-1301 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "isp.h" #include "ispreg.h" #include "ispccdc.h" #include "isppreview.h" #include "ispresizer.h" #include "ispcsi2.h" #include "ispccp2.h" #include "isph3a.h" #include "isphist.h" /* * this is provided as an interim solution until omap3isp doesn't need * any omap-specific iommu API */ #define to_iommu(dev) \ (struct omap_iommu *)platform_get_drvdata(to_platform_device(dev)) static unsigned int autoidle; module_param(autoidle, int, 0444); MODULE_PARM_DESC(autoidle, "Enable OMAP3ISP AUTOIDLE support"); static void isp_save_ctx(struct isp_device *isp); static void isp_restore_ctx(struct isp_device *isp); static const struct isp_res_mapping isp_res_maps[] = { { .isp_rev = ISP_REVISION_2_0, .map = 1 << OMAP3_ISP_IOMEM_MAIN | 1 << OMAP3_ISP_IOMEM_CCP2 | 1 << OMAP3_ISP_IOMEM_CCDC | 1 << OMAP3_ISP_IOMEM_HIST | 1 << OMAP3_ISP_IOMEM_H3A | 1 << OMAP3_ISP_IOMEM_PREV | 1 << OMAP3_ISP_IOMEM_RESZ | 1 << OMAP3_ISP_IOMEM_SBL | 1 << OMAP3_ISP_IOMEM_CSI2A_REGS1 | 1 << OMAP3_ISP_IOMEM_CSIPHY2, }, { .isp_rev = ISP_REVISION_15_0, .map = 1 << OMAP3_ISP_IOMEM_MAIN | 1 << OMAP3_ISP_IOMEM_CCP2 | 1 << OMAP3_ISP_IOMEM_CCDC | 1 << OMAP3_ISP_IOMEM_HIST | 1 << OMAP3_ISP_IOMEM_H3A | 1 << OMAP3_ISP_IOMEM_PREV | 1 << OMAP3_ISP_IOMEM_RESZ | 1 << OMAP3_ISP_IOMEM_SBL | 1 << OMAP3_ISP_IOMEM_CSI2A_REGS1 | 1 << OMAP3_ISP_IOMEM_CSIPHY2 | 1 << OMAP3_ISP_IOMEM_CSI2A_REGS2 | 1 << OMAP3_ISP_IOMEM_CSI2C_REGS1 | 1 << OMAP3_ISP_IOMEM_CSIPHY1 | 1 << OMAP3_ISP_IOMEM_CSI2C_REGS2, }, }; /* Structure for saving/restoring ISP module registers */ static struct isp_reg isp_reg_list[] = { {OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG, 0}, {OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, 0}, {OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, 0}, {0, ISP_TOK_TERM, 0} }; /* * omap3isp_flush - Post pending L3 bus writes by doing a register readback * @isp: OMAP3 ISP device * * In order to force posting of pending writes, we need to write and * readback the same register, in this case the revision register. * * See this link for reference: * http://www.mail-archive.com/linux-omap@vger.kernel.org/msg08149.html */ void omap3isp_flush(struct isp_device *isp) { isp_reg_writel(isp, 0, OMAP3_ISP_IOMEM_MAIN, ISP_REVISION); isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_REVISION); } /* * isp_enable_interrupts - Enable ISP interrupts. * @isp: OMAP3 ISP device */ static void isp_enable_interrupts(struct isp_device *isp) { static const u32 irq = IRQ0ENABLE_CSIA_IRQ | IRQ0ENABLE_CSIB_IRQ | IRQ0ENABLE_CCDC_LSC_PREF_ERR_IRQ | IRQ0ENABLE_CCDC_LSC_DONE_IRQ | IRQ0ENABLE_CCDC_VD0_IRQ | IRQ0ENABLE_CCDC_VD1_IRQ | IRQ0ENABLE_HS_VS_IRQ | IRQ0ENABLE_HIST_DONE_IRQ | IRQ0ENABLE_H3A_AWB_DONE_IRQ | IRQ0ENABLE_H3A_AF_DONE_IRQ | IRQ0ENABLE_PRV_DONE_IRQ | IRQ0ENABLE_RSZ_DONE_IRQ; isp_reg_writel(isp, irq, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS); isp_reg_writel(isp, irq, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE); } /* * isp_disable_interrupts - Disable ISP interrupts. * @isp: OMAP3 ISP device */ static void isp_disable_interrupts(struct isp_device *isp) { isp_reg_writel(isp, 0, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE); } /** * isp_set_xclk - Configures the specified cam_xclk to the desired frequency. * @isp: OMAP3 ISP device * @xclk: Desired frequency of the clock in Hz. 0 = stable low, 1 is stable high * @xclksel: XCLK to configure (0 = A, 1 = B). * * Configures the specified MCLK divisor in the ISP timing control register * (TCTRL_CTRL) to generate the desired xclk clock value. * * Divisor = cam_mclk_hz / xclk * * Returns the final frequency that is actually being generated **/ static u32 isp_set_xclk(struct isp_device *isp, u32 xclk, u8 xclksel) { u32 divisor; u32 currentxclk; unsigned long mclk_hz; if (!omap3isp_get(isp)) return 0; mclk_hz = clk_get_rate(isp->clock[ISP_CLK_CAM_MCLK]); if (xclk >= mclk_hz) { divisor = ISPTCTRL_CTRL_DIV_BYPASS; currentxclk = mclk_hz; } else if (xclk >= 2) { divisor = mclk_hz / xclk; if (divisor >= ISPTCTRL_CTRL_DIV_BYPASS) divisor = ISPTCTRL_CTRL_DIV_BYPASS - 1; currentxclk = mclk_hz / divisor; } else { divisor = xclk; currentxclk = 0; } switch (xclksel) { case ISP_XCLK_A: isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, ISPTCTRL_CTRL_DIVA_MASK, divisor << ISPTCTRL_CTRL_DIVA_SHIFT); dev_dbg(isp->dev, "isp_set_xclk(): cam_xclka set to %d Hz\n", currentxclk); break; case ISP_XCLK_B: isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, ISPTCTRL_CTRL_DIVB_MASK, divisor << ISPTCTRL_CTRL_DIVB_SHIFT); dev_dbg(isp->dev, "isp_set_xclk(): cam_xclkb set to %d Hz\n", currentxclk); break; case ISP_XCLK_NONE: default: omap3isp_put(isp); dev_dbg(isp->dev, "ISP_ERR: isp_set_xclk(): Invalid requested " "xclk. Must be 0 (A) or 1 (B).\n"); return -EINVAL; } /* Do we go from stable whatever to clock? */ if (divisor >= 2 && isp->xclk_divisor[xclksel - 1] < 2) omap3isp_get(isp); /* Stopping the clock. */ else if (divisor < 2 && isp->xclk_divisor[xclksel - 1] >= 2) omap3isp_put(isp); isp->xclk_divisor[xclksel - 1] = divisor; omap3isp_put(isp); return currentxclk; } /* * isp_power_settings - Sysconfig settings, for Power Management. * @isp: OMAP3 ISP device * @idle: Consider idle state. * * Sets the power settings for the ISP, and SBL bus. */ static void isp_power_settings(struct isp_device *isp, int idle) { isp_reg_writel(isp, ((idle ? ISP_SYSCONFIG_MIDLEMODE_SMARTSTANDBY : ISP_SYSCONFIG_MIDLEMODE_FORCESTANDBY) << ISP_SYSCONFIG_MIDLEMODE_SHIFT) | ((isp->revision == ISP_REVISION_15_0) ? ISP_SYSCONFIG_AUTOIDLE : 0), OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG); if (isp->autoidle) isp_reg_writel(isp, ISPCTRL_SBL_AUTOIDLE, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL); } /* * Configure the bridge and lane shifter. Valid inputs are * * CCDC_INPUT_PARALLEL: Parallel interface * CCDC_INPUT_CSI2A: CSI2a receiver * CCDC_INPUT_CCP2B: CCP2b receiver * CCDC_INPUT_CSI2C: CSI2c receiver * * The bridge and lane shifter are configured according to the selected input * and the ISP platform data. */ void omap3isp_configure_bridge(struct isp_device *isp, enum ccdc_input_entity input, const struct isp_parallel_platform_data *pdata, unsigned int shift) { u32 ispctrl_val; ispctrl_val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL); ispctrl_val &= ~ISPCTRL_SHIFT_MASK; ispctrl_val &= ~ISPCTRL_PAR_CLK_POL_INV; ispctrl_val &= ~ISPCTRL_PAR_SER_CLK_SEL_MASK; ispctrl_val &= ~ISPCTRL_PAR_BRIDGE_MASK; switch (input) { case CCDC_INPUT_PARALLEL: ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_PARALLEL; ispctrl_val |= pdata->clk_pol << ISPCTRL_PAR_CLK_POL_SHIFT; ispctrl_val |= pdata->bridge << ISPCTRL_PAR_BRIDGE_SHIFT; shift += pdata->data_lane_shift * 2; break; case CCDC_INPUT_CSI2A: ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_CSIA; break; case CCDC_INPUT_CCP2B: ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_CSIB; break; case CCDC_INPUT_CSI2C: ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_CSIC; break; default: return; } ispctrl_val |= ((shift/2) << ISPCTRL_SHIFT_SHIFT) & ISPCTRL_SHIFT_MASK; ispctrl_val &= ~ISPCTRL_SYNC_DETECT_MASK; ispctrl_val |= ISPCTRL_SYNC_DETECT_VSRISE; isp_reg_writel(isp, ispctrl_val, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL); } /** * isp_set_pixel_clock - Configures the ISP pixel clock * @isp: OMAP3 ISP device * @pixelclk: Average pixel clock in Hz * * Set the average pixel clock required by the sensor. The ISP will use the * lowest possible memory bandwidth settings compatible with the clock. **/ static void isp_set_pixel_clock(struct isp_device *isp, unsigned int pixelclk) { isp->isp_ccdc.vpcfg.pixelclk = pixelclk; } void omap3isp_hist_dma_done(struct isp_device *isp) { if (omap3isp_ccdc_busy(&isp->isp_ccdc) || omap3isp_stat_pcr_busy(&isp->isp_hist)) { /* Histogram cannot be enabled in this frame anymore */ atomic_set(&isp->isp_hist.buf_err, 1); dev_dbg(isp->dev, "hist: Out of synchronization with " "CCDC. Ignoring next buffer.\n"); } } static inline void isp_isr_dbg(struct isp_device *isp, u32 irqstatus) { static const char *name[] = { "CSIA_IRQ", "res1", "res2", "CSIB_LCM_IRQ", "CSIB_IRQ", "res5", "res6", "res7", "CCDC_VD0_IRQ", "CCDC_VD1_IRQ", "CCDC_VD2_IRQ", "CCDC_ERR_IRQ", "H3A_AF_DONE_IRQ", "H3A_AWB_DONE_IRQ", "res14", "res15", "HIST_DONE_IRQ", "CCDC_LSC_DONE", "CCDC_LSC_PREFETCH_COMPLETED", "CCDC_LSC_PREFETCH_ERROR", "PRV_DONE_IRQ", "CBUFF_IRQ", "res22", "res23", "RSZ_DONE_IRQ", "OVF_IRQ", "res26", "res27", "MMU_ERR_IRQ", "OCP_ERR_IRQ", "SEC_ERR_IRQ", "HS_VS_IRQ", }; int i; dev_dbg(isp->dev, "ISP IRQ: "); for (i = 0; i < ARRAY_SIZE(name); i++) { if ((1 << i) & irqstatus) printk(KERN_CONT "%s ", name[i]); } printk(KERN_CONT "\n"); } static void isp_isr_sbl(struct isp_device *isp) { struct device *dev = isp->dev; u32 sbl_pcr; /* * Handle shared buffer logic overflows for video buffers. * ISPSBL_PCR_CCDCPRV_2_RSZ_OVF can be safely ignored. */ sbl_pcr = isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_PCR); isp_reg_writel(isp, sbl_pcr, OMAP3_ISP_IOMEM_SBL, ISPSBL_PCR); sbl_pcr &= ~ISPSBL_PCR_CCDCPRV_2_RSZ_OVF; if (sbl_pcr) dev_dbg(dev, "SBL overflow (PCR = 0x%08x)\n", sbl_pcr); if (sbl_pcr & (ISPSBL_PCR_CCDC_WBL_OVF | ISPSBL_PCR_CSIA_WBL_OVF | ISPSBL_PCR_CSIB_WBL_OVF)) { isp->isp_ccdc.error = 1; if (isp->isp_ccdc.output & CCDC_OUTPUT_PREVIEW) isp->isp_prev.error = 1; if (isp->isp_ccdc.output & CCDC_OUTPUT_RESIZER) isp->isp_res.error = 1; } if (sbl_pcr & ISPSBL_PCR_PRV_WBL_OVF) { isp->isp_prev.error = 1; if (isp->isp_res.input == RESIZER_INPUT_VP && !(isp->isp_ccdc.output & CCDC_OUTPUT_RESIZER)) isp->isp_res.error = 1; } if (sbl_pcr & (ISPSBL_PCR_RSZ1_WBL_OVF | ISPSBL_PCR_RSZ2_WBL_OVF | ISPSBL_PCR_RSZ3_WBL_OVF | ISPSBL_PCR_RSZ4_WBL_OVF)) isp->isp_res.error = 1; if (sbl_pcr & ISPSBL_PCR_H3A_AF_WBL_OVF) omap3isp_stat_sbl_overflow(&isp->isp_af); if (sbl_pcr & ISPSBL_PCR_H3A_AEAWB_WBL_OVF) omap3isp_stat_sbl_overflow(&isp->isp_aewb); } /* * isp_isr - Interrupt Service Routine for Camera ISP module. * @irq: Not used currently. * @_isp: Pointer to the OMAP3 ISP device * * Handles the corresponding callback if plugged in. * * Returns IRQ_HANDLED when IRQ was correctly handled, or IRQ_NONE when the * IRQ wasn't handled. */ static irqreturn_t isp_isr(int irq, void *_isp) { static const u32 ccdc_events = IRQ0STATUS_CCDC_LSC_PREF_ERR_IRQ | IRQ0STATUS_CCDC_LSC_DONE_IRQ | IRQ0STATUS_CCDC_VD0_IRQ | IRQ0STATUS_CCDC_VD1_IRQ | IRQ0STATUS_HS_VS_IRQ; struct isp_device *isp = _isp; u32 irqstatus; int ret; irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS); isp_reg_writel(isp, irqstatus, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS); isp_isr_sbl(isp); if (irqstatus & IRQ0STATUS_CSIA_IRQ) { ret = omap3isp_csi2_isr(&isp->isp_csi2a); if (ret) isp->isp_ccdc.error = 1; } if (irqstatus & IRQ0STATUS_CSIB_IRQ) { ret = omap3isp_ccp2_isr(&isp->isp_ccp2); if (ret) isp->isp_ccdc.error = 1; } if (irqstatus & IRQ0STATUS_CCDC_VD0_IRQ) { if (isp->isp_ccdc.output & CCDC_OUTPUT_PREVIEW) omap3isp_preview_isr_frame_sync(&isp->isp_prev); if (isp->isp_ccdc.output & CCDC_OUTPUT_RESIZER) omap3isp_resizer_isr_frame_sync(&isp->isp_res); omap3isp_stat_isr_frame_sync(&isp->isp_aewb); omap3isp_stat_isr_frame_sync(&isp->isp_af); omap3isp_stat_isr_frame_sync(&isp->isp_hist); } if (irqstatus & ccdc_events) omap3isp_ccdc_isr(&isp->isp_ccdc, irqstatus & ccdc_events); if (irqstatus & IRQ0STATUS_PRV_DONE_IRQ) { if (isp->isp_prev.output & PREVIEW_OUTPUT_RESIZER) omap3isp_resizer_isr_frame_sync(&isp->isp_res); omap3isp_preview_isr(&isp->isp_prev); } if (irqstatus & IRQ0STATUS_RSZ_DONE_IRQ) omap3isp_resizer_isr(&isp->isp_res); if (irqstatus & IRQ0STATUS_H3A_AWB_DONE_IRQ) omap3isp_stat_isr(&isp->isp_aewb); if (irqstatus & IRQ0STATUS_H3A_AF_DONE_IRQ) omap3isp_stat_isr(&isp->isp_af); if (irqstatus & IRQ0STATUS_HIST_DONE_IRQ) omap3isp_stat_isr(&isp->isp_hist); omap3isp_flush(isp); #if defined(DEBUG) && defined(ISP_ISR_DEBUG) isp_isr_dbg(isp, irqstatus); #endif return IRQ_HANDLED; } /* ----------------------------------------------------------------------------- * Pipeline power management * * Entities must be powered up when part of a pipeline that contains at least * one open video device node. * * To achieve this use the entity use_count field to track the number of users. * For entities corresponding to video device nodes the use_count field stores * the users count of the node. For entities corresponding to subdevs the * use_count field stores the total number of users of all video device nodes * in the pipeline. * * The omap3isp_pipeline_pm_use() function must be called in the open() and * close() handlers of video device nodes. It increments or decrements the use * count of all subdev entities in the pipeline. * * To react to link management on powered pipelines, the link setup notification * callback updates the use count of all entities in the source and sink sides * of the link. */ /* * isp_pipeline_pm_use_count - Count the number of users of a pipeline * @entity: The entity * * Return the total number of users of all video device nodes in the pipeline. */ static int isp_pipeline_pm_use_count(struct media_entity *entity) { struct media_entity_graph graph; int use = 0; media_entity_graph_walk_start(&graph, entity); while ((entity = media_entity_graph_walk_next(&graph))) { if (media_entity_type(entity) == MEDIA_ENT_T_DEVNODE) use += entity->use_count; } return use; } /* * isp_pipeline_pm_power_one - Apply power change to an entity * @entity: The entity * @change: Use count change * * Change the entity use count by @change. If the entity is a subdev update its * power state by calling the core::s_power operation when the use count goes * from 0 to != 0 or from != 0 to 0. * * Return 0 on success or a negative error code on failure. */ static int isp_pipeline_pm_power_one(struct media_entity *entity, int change) { struct v4l2_subdev *subdev; int ret; subdev = media_entity_type(entity) == MEDIA_ENT_T_V4L2_SUBDEV ? media_entity_to_v4l2_subdev(entity) : NULL; if (entity->use_count == 0 && change > 0 && subdev != NULL) { ret = v4l2_subdev_call(subdev, core, s_power, 1); if (ret < 0 && ret != -ENOIOCTLCMD) return ret; } entity->use_count += change; WARN_ON(entity->use_count < 0); if (entity->use_count == 0 && change < 0 && subdev != NULL) v4l2_subdev_call(subdev, core, s_power, 0); return 0; } /* * isp_pipeline_pm_power - Apply power change to all entities in a pipeline * @entity: The entity * @change: Use count change * * Walk the pipeline to update the use count and the power state of all non-node * entities. * * Return 0 on success or a negative error code on failure. */ static int isp_pipeline_pm_power(struct media_entity *entity, int change) { struct media_entity_graph graph; struct media_entity *first = entity; int ret = 0; if (!change) return 0; media_entity_graph_walk_start(&graph, entity); while (!ret && (entity = media_entity_graph_walk_next(&graph))) if (media_entity_type(entity) != MEDIA_ENT_T_DEVNODE) ret = isp_pipeline_pm_power_one(entity, change); if (!ret) return 0; media_entity_graph_walk_start(&graph, first); while ((first = media_entity_graph_walk_next(&graph)) && first != entity) if (media_entity_type(first) != MEDIA_ENT_T_DEVNODE) isp_pipeline_pm_power_one(first, -change); return ret; } /* * omap3isp_pipeline_pm_use - Update the use count of an entity * @entity: The entity * @use: Use (1) or stop using (0) the entity * * Update the use count of all entities in the pipeline and power entities on or * off accordingly. * * Return 0 on success or a negative error code on failure. Powering entities * off is assumed to never fail. No failure can occur when the use parameter is * set to 0. */ int omap3isp_pipeline_pm_use(struct media_entity *entity, int use) { int change = use ? 1 : -1; int ret; mutex_lock(&entity->parent->graph_mutex); /* Apply use count to node. */ entity->use_count += change; WARN_ON(entity->use_count < 0); /* Apply power change to connected non-nodes. */ ret = isp_pipeline_pm_power(entity, change); if (ret < 0) entity->use_count -= change; mutex_unlock(&entity->parent->graph_mutex); return ret; } /* * isp_pipeline_link_notify - Link management notification callback * @source: Pad at the start of the link * @sink: Pad at the end of the link * @flags: New link flags that will be applied * * React to link management on powered pipelines by updating the use count of * all entities in the source and sink sides of the link. Entities are powered * on or off accordingly. * * Return 0 on success or a negative error code on failure. Powering entities * off is assumed to never fail. This function will not fail for disconnection * events. */ static int isp_pipeline_link_notify(struct media_pad *source, struct media_pad *sink, u32 flags) { int source_use = isp_pipeline_pm_use_count(source->entity); int sink_use = isp_pipeline_pm_use_count(sink->entity); int ret; if (!(flags & MEDIA_LNK_FL_ENABLED)) { /* Powering off entities is assumed to never fail. */ isp_pipeline_pm_power(source->entity, -sink_use); isp_pipeline_pm_power(sink->entity, -source_use); return 0; } ret = isp_pipeline_pm_power(source->entity, sink_use); if (ret < 0) return ret; ret = isp_pipeline_pm_power(sink->entity, source_use); if (ret < 0) isp_pipeline_pm_power(source->entity, -sink_use); return ret; } /* ----------------------------------------------------------------------------- * Pipeline stream management */ /* * isp_pipeline_enable - Enable streaming on a pipeline * @pipe: ISP pipeline * @mode: Stream mode (single shot or continuous) * * Walk the entities chain starting at the pipeline output video node and start * all modules in the chain in the given mode. * * Return 0 if successful, or the return value of the failed video::s_stream * operation otherwise. */ static int isp_pipeline_enable(struct isp_pipeline *pipe, enum isp_pipeline_stream_state mode) { struct isp_device *isp = pipe->output->isp; struct media_entity *entity; struct media_pad *pad; struct v4l2_subdev *subdev; unsigned long flags; int ret; spin_lock_irqsave(&pipe->lock, flags); pipe->state &= ~(ISP_PIPELINE_IDLE_INPUT | ISP_PIPELINE_IDLE_OUTPUT); spin_unlock_irqrestore(&pipe->lock, flags); pipe->do_propagation = false; entity = &pipe->output->video.entity; while (1) { pad = &entity->pads[0]; if (!(pad->flags & MEDIA_PAD_FL_SINK)) break; pad = media_entity_remote_source(pad); if (pad == NULL || media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV) break; entity = pad->entity; subdev = media_entity_to_v4l2_subdev(entity); ret = v4l2_subdev_call(subdev, video, s_stream, mode); if (ret < 0 && ret != -ENOIOCTLCMD) return ret; if (subdev == &isp->isp_ccdc.subdev) { v4l2_subdev_call(&isp->isp_aewb.subdev, video, s_stream, mode); v4l2_subdev_call(&isp->isp_af.subdev, video, s_stream, mode); v4l2_subdev_call(&isp->isp_hist.subdev, video, s_stream, mode); pipe->do_propagation = true; } } /* Frame number propagation. In continuous streaming mode the number * is incremented in the frame start ISR. In mem-to-mem mode * singleshot is used and frame start IRQs are not available. * Thus we have to increment the number here. */ if (pipe->do_propagation && mode == ISP_PIPELINE_STREAM_SINGLESHOT) atomic_inc(&pipe->frame_number); return 0; } static int isp_pipeline_wait_resizer(struct isp_device *isp) { return omap3isp_resizer_busy(&isp->isp_res); } static int isp_pipeline_wait_preview(struct isp_device *isp) { return omap3isp_preview_busy(&isp->isp_prev); } static int isp_pipeline_wait_ccdc(struct isp_device *isp) { return omap3isp_stat_busy(&isp->isp_af) || omap3isp_stat_busy(&isp->isp_aewb) || omap3isp_stat_busy(&isp->isp_hist) || omap3isp_ccdc_busy(&isp->isp_ccdc); } #define ISP_STOP_TIMEOUT msecs_to_jiffies(1000) static int isp_pipeline_wait(struct isp_device *isp, int(*busy)(struct isp_device *isp)) { unsigned long timeout = jiffies + ISP_STOP_TIMEOUT; while (!time_after(jiffies, timeout)) { if (!busy(isp)) return 0; } return 1; } /* * isp_pipeline_disable - Disable streaming on a pipeline * @pipe: ISP pipeline * * Walk the entities chain starting at the pipeline output video node and stop * all modules in the chain. Wait synchronously for the modules to be stopped if * necessary. * * Return 0 if all modules have been properly stopped, or -ETIMEDOUT if a module * can't be stopped (in which case a software reset of the ISP is probably * necessary). */ static int isp_pipeline_disable(struct isp_pipeline *pipe) { struct isp_device *isp = pipe->output->isp; struct media_entity *entity; struct media_pad *pad; struct v4l2_subdev *subdev; int failure = 0; int ret; /* * We need to stop all the modules after CCDC first or they'll * never stop since they may not get a full frame from CCDC. */ entity = &pipe->output->video.entity; while (1) { pad = &entity->pads[0]; if (!(pad->flags & MEDIA_PAD_FL_SINK)) break; pad = media_entity_remote_source(pad); if (pad == NULL || media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV) break; entity = pad->entity; subdev = media_entity_to_v4l2_subdev(entity); if (subdev == &isp->isp_ccdc.subdev) { v4l2_subdev_call(&isp->isp_aewb.subdev, video, s_stream, 0); v4l2_subdev_call(&isp->isp_af.subdev, video, s_stream, 0); v4l2_subdev_call(&isp->isp_hist.subdev, video, s_stream, 0); } v4l2_subdev_call(subdev, video, s_stream, 0); if (subdev == &isp->isp_res.subdev) ret = isp_pipeline_wait(isp, isp_pipeline_wait_resizer); else if (subdev == &isp->isp_prev.subdev) ret = isp_pipeline_wait(isp, isp_pipeline_wait_preview); else if (subdev == &isp->isp_ccdc.subdev) ret = isp_pipeline_wait(isp, isp_pipeline_wait_ccdc); else ret = 0; if (ret) { dev_info(isp->dev, "Unable to stop %s\n", subdev->name); failure = -ETIMEDOUT; } } if (failure < 0) isp->needs_reset = true; return failure; } /* * omap3isp_pipeline_set_stream - Enable/disable streaming on a pipeline * @pipe: ISP pipeline * @state: Stream state (stopped, single shot or continuous) * * Set the pipeline to the given stream state. Pipelines can be started in * single-shot or continuous mode. * * Return 0 if successful, or the return value of the failed video::s_stream * operation otherwise. The pipeline state is not updated when the operation * fails, except when stopping the pipeline. */ int omap3isp_pipeline_set_stream(struct isp_pipeline *pipe, enum isp_pipeline_stream_state state) { int ret; if (state == ISP_PIPELINE_STREAM_STOPPED) ret = isp_pipeline_disable(pipe); else ret = isp_pipeline_enable(pipe, state); if (ret == 0 || state == ISP_PIPELINE_STREAM_STOPPED) pipe->stream_state = state; return ret; } /* * isp_pipeline_resume - Resume streaming on a pipeline * @pipe: ISP pipeline * * Resume video output and input and re-enable pipeline. */ static void isp_pipeline_resume(struct isp_pipeline *pipe) { int singleshot = pipe->stream_state == ISP_PIPELINE_STREAM_SINGLESHOT; omap3isp_video_resume(pipe->output, !singleshot); if (singleshot) omap3isp_video_resume(pipe->input, 0); isp_pipeline_enable(pipe, pipe->stream_state); } /* * isp_pipeline_suspend - Suspend streaming on a pipeline * @pipe: ISP pipeline * * Suspend pipeline. */ static void isp_pipeline_suspend(struct isp_pipeline *pipe) { isp_pipeline_disable(pipe); } /* * isp_pipeline_is_last - Verify if entity has an enabled link to the output * video node * @me: ISP module's media entity * * Returns 1 if the entity has an enabled link to the output video node or 0 * otherwise. It's true only while pipeline can have no more than one output * node. */ static int isp_pipeline_is_last(struct media_entity *me) { struct isp_pipeline *pipe; struct media_pad *pad; if (!me->pipe) return 0; pipe = to_isp_pipeline(me); if (pipe->stream_state == ISP_PIPELINE_STREAM_STOPPED) return 0; pad = media_entity_remote_source(&pipe->output->pad); return pad->entity == me; } /* * isp_suspend_module_pipeline - Suspend pipeline to which belongs the module * @me: ISP module's media entity * * Suspend the whole pipeline if module's entity has an enabled link to the * output video node. It works only while pipeline can have no more than one * output node. */ static void isp_suspend_module_pipeline(struct media_entity *me) { if (isp_pipeline_is_last(me)) isp_pipeline_suspend(to_isp_pipeline(me)); } /* * isp_resume_module_pipeline - Resume pipeline to which belongs the module * @me: ISP module's media entity * * Resume the whole pipeline if module's entity has an enabled link to the * output video node. It works only while pipeline can have no more than one * output node. */ static void isp_resume_module_pipeline(struct media_entity *me) { if (isp_pipeline_is_last(me)) isp_pipeline_resume(to_isp_pipeline(me)); } /* * isp_suspend_modules - Suspend ISP submodules. * @isp: OMAP3 ISP device * * Returns 0 if suspend left in idle state all the submodules properly, * or returns 1 if a general Reset is required to suspend the submodules. */ static int isp_suspend_modules(struct isp_device *isp) { unsigned long timeout; omap3isp_stat_suspend(&isp->isp_aewb); omap3isp_stat_suspend(&isp->isp_af); omap3isp_stat_suspend(&isp->isp_hist); isp_suspend_module_pipeline(&isp->isp_res.subdev.entity); isp_suspend_module_pipeline(&isp->isp_prev.subdev.entity); isp_suspend_module_pipeline(&isp->isp_ccdc.subdev.entity); isp_suspend_module_pipeline(&isp->isp_csi2a.subdev.entity); isp_suspend_module_pipeline(&isp->isp_ccp2.subdev.entity); timeout = jiffies + ISP_STOP_TIMEOUT; while (omap3isp_stat_busy(&isp->isp_af) || omap3isp_stat_busy(&isp->isp_aewb) || omap3isp_stat_busy(&isp->isp_hist) || omap3isp_preview_busy(&isp->isp_prev) || omap3isp_resizer_busy(&isp->isp_res) || omap3isp_ccdc_busy(&isp->isp_ccdc)) { if (time_after(jiffies, timeout)) { dev_info(isp->dev, "can't stop modules.\n"); return 1; } msleep(1); } return 0; } /* * isp_resume_modules - Resume ISP submodules. * @isp: OMAP3 ISP device */ static void isp_resume_modules(struct isp_device *isp) { omap3isp_stat_resume(&isp->isp_aewb); omap3isp_stat_resume(&isp->isp_af); omap3isp_stat_resume(&isp->isp_hist); isp_resume_module_pipeline(&isp->isp_res.subdev.entity); isp_resume_module_pipeline(&isp->isp_prev.subdev.entity); isp_resume_module_pipeline(&isp->isp_ccdc.subdev.entity); isp_resume_module_pipeline(&isp->isp_csi2a.subdev.entity); isp_resume_module_pipeline(&isp->isp_ccp2.subdev.entity); } /* * isp_reset - Reset ISP with a timeout wait for idle. * @isp: OMAP3 ISP device */ static int isp_reset(struct isp_device *isp) { unsigned long timeout = 0; isp_reg_writel(isp, isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG) | ISP_SYSCONFIG_SOFTRESET, OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG); while (!(isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_SYSSTATUS) & 0x1)) { if (timeout++ > 10000) { dev_alert(isp->dev, "cannot reset ISP\n"); return -ETIMEDOUT; } udelay(1); } return 0; } /* * isp_save_context - Saves the values of the ISP module registers. * @isp: OMAP3 ISP device * @reg_list: Structure containing pairs of register address and value to * modify on OMAP. */ static void isp_save_context(struct isp_device *isp, struct isp_reg *reg_list) { struct isp_reg *next = reg_list; for (; next->reg != ISP_TOK_TERM; next++) next->val = isp_reg_readl(isp, next->mmio_range, next->reg); } /* * isp_restore_context - Restores the values of the ISP module registers. * @isp: OMAP3 ISP device * @reg_list: Structure containing pairs of register address and value to * modify on OMAP. */ static void isp_restore_context(struct isp_device *isp, struct isp_reg *reg_list) { struct isp_reg *next = reg_list; for (; next->reg != ISP_TOK_TERM; next++) isp_reg_writel(isp, next->val, next->mmio_range, next->reg); } /* * isp_save_ctx - Saves ISP, CCDC, HIST, H3A, PREV, RESZ & MMU context. * @isp: OMAP3 ISP device * * Routine for saving the context of each module in the ISP. * CCDC, HIST, H3A, PREV, RESZ and MMU. */ static void isp_save_ctx(struct isp_device *isp) { isp_save_context(isp, isp_reg_list); if (isp->iommu) omap_iommu_save_ctx(isp->iommu); } /* * isp_restore_ctx - Restores ISP, CCDC, HIST, H3A, PREV, RESZ & MMU context. * @isp: OMAP3 ISP device * * Routine for restoring the context of each module in the ISP. * CCDC, HIST, H3A, PREV, RESZ and MMU. */ static void isp_restore_ctx(struct isp_device *isp) { isp_restore_context(isp, isp_reg_list); if (isp->iommu) omap_iommu_restore_ctx(isp->iommu); omap3isp_ccdc_restore_context(isp); omap3isp_preview_restore_context(isp); } /* ----------------------------------------------------------------------------- * SBL resources management */ #define OMAP3_ISP_SBL_READ (OMAP3_ISP_SBL_CSI1_READ | \ OMAP3_ISP_SBL_CCDC_LSC_READ | \ OMAP3_ISP_SBL_PREVIEW_READ | \ OMAP3_ISP_SBL_RESIZER_READ) #define OMAP3_ISP_SBL_WRITE (OMAP3_ISP_SBL_CSI1_WRITE | \ OMAP3_ISP_SBL_CSI2A_WRITE | \ OMAP3_ISP_SBL_CSI2C_WRITE | \ OMAP3_ISP_SBL_CCDC_WRITE | \ OMAP3_ISP_SBL_PREVIEW_WRITE) void omap3isp_sbl_enable(struct isp_device *isp, enum isp_sbl_resource res) { u32 sbl = 0; isp->sbl_resources |= res; if (isp->sbl_resources & OMAP3_ISP_SBL_CSI1_READ) sbl |= ISPCTRL_SBL_SHARED_RPORTA; if (isp->sbl_resources & OMAP3_ISP_SBL_CCDC_LSC_READ) sbl |= ISPCTRL_SBL_SHARED_RPORTB; if (isp->sbl_resources & OMAP3_ISP_SBL_CSI2C_WRITE) sbl |= ISPCTRL_SBL_SHARED_WPORTC; if (isp->sbl_resources & OMAP3_ISP_SBL_RESIZER_WRITE) sbl |= ISPCTRL_SBL_WR0_RAM_EN; if (isp->sbl_resources & OMAP3_ISP_SBL_WRITE) sbl |= ISPCTRL_SBL_WR1_RAM_EN; if (isp->sbl_resources & OMAP3_ISP_SBL_READ) sbl |= ISPCTRL_SBL_RD_RAM_EN; isp_reg_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, sbl); } void omap3isp_sbl_disable(struct isp_device *isp, enum isp_sbl_resource res) { u32 sbl = 0; isp->sbl_resources &= ~res; if (!(isp->sbl_resources & OMAP3_ISP_SBL_CSI1_READ)) sbl |= ISPCTRL_SBL_SHARED_RPORTA; if (!(isp->sbl_resources & OMAP3_ISP_SBL_CCDC_LSC_READ)) sbl |= ISPCTRL_SBL_SHARED_RPORTB; if (!(isp->sbl_resources & OMAP3_ISP_SBL_CSI2C_WRITE)) sbl |= ISPCTRL_SBL_SHARED_WPORTC; if (!(isp->sbl_resources & OMAP3_ISP_SBL_RESIZER_WRITE)) sbl |= ISPCTRL_SBL_WR0_RAM_EN; if (!(isp->sbl_resources & OMAP3_ISP_SBL_WRITE)) sbl |= ISPCTRL_SBL_WR1_RAM_EN; if (!(isp->sbl_resources & OMAP3_ISP_SBL_READ)) sbl |= ISPCTRL_SBL_RD_RAM_EN; isp_reg_clr(isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, sbl); } /* * isp_module_sync_idle - Helper to sync module with its idle state * @me: ISP submodule's media entity * @wait: ISP submodule's wait queue for streamoff/interrupt synchronization * @stopping: flag which tells module wants to stop * * This function checks if ISP submodule needs to wait for next interrupt. If * yes, makes the caller to sleep while waiting for such event. */ int omap3isp_module_sync_idle(struct media_entity *me, wait_queue_head_t *wait, atomic_t *stopping) { struct isp_pipeline *pipe = to_isp_pipeline(me); if (pipe->stream_state == ISP_PIPELINE_STREAM_STOPPED || (pipe->stream_state == ISP_PIPELINE_STREAM_SINGLESHOT && !isp_pipeline_ready(pipe))) return 0; /* * atomic_set() doesn't include memory barrier on ARM platform for SMP * scenario. We'll call it here to avoid race conditions. */ atomic_set(stopping, 1); smp_mb(); /* * If module is the last one, it's writing to memory. In this case, * it's necessary to check if the module is already paused due to * DMA queue underrun or if it has to wait for next interrupt to be * idle. * If it isn't the last one, the function won't sleep but *stopping * will still be set to warn next submodule caller's interrupt the * module wants to be idle. */ if (isp_pipeline_is_last(me)) { struct isp_video *video = pipe->output; unsigned long flags; spin_lock_irqsave(&video->queue->irqlock, flags); if (video->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_UNDERRUN) { spin_unlock_irqrestore(&video->queue->irqlock, flags); atomic_set(stopping, 0); smp_mb(); return 0; } spin_unlock_irqrestore(&video->queue->irqlock, flags); if (!wait_event_timeout(*wait, !atomic_read(stopping), msecs_to_jiffies(1000))) { atomic_set(stopping, 0); smp_mb(); return -ETIMEDOUT; } } return 0; } /* * omap3isp_module_sync_is_stopped - Helper to verify if module was stopping * @wait: ISP submodule's wait queue for streamoff/interrupt synchronization * @stopping: flag which tells module wants to stop * * This function checks if ISP submodule was stopping. In case of yes, it * notices the caller by setting stopping to 0 and waking up the wait queue. * Returns 1 if it was stopping or 0 otherwise. */ int omap3isp_module_sync_is_stopping(wait_queue_head_t *wait, atomic_t *stopping) { if (atomic_cmpxchg(stopping, 1, 0)) { wake_up(wait); return 1; } return 0; } /* -------------------------------------------------------------------------- * Clock management */ #define ISPCTRL_CLKS_MASK (ISPCTRL_H3A_CLK_EN | \ ISPCTRL_HIST_CLK_EN | \ ISPCTRL_RSZ_CLK_EN | \ (ISPCTRL_CCDC_CLK_EN | ISPCTRL_CCDC_RAM_EN) | \ (ISPCTRL_PREV_CLK_EN | ISPCTRL_PREV_RAM_EN)) static void __isp_subclk_update(struct isp_device *isp) { u32 clk = 0; if (isp->subclk_resources & OMAP3_ISP_SUBCLK_H3A) clk |= ISPCTRL_H3A_CLK_EN; if (isp->subclk_resources & OMAP3_ISP_SUBCLK_HIST) clk |= ISPCTRL_HIST_CLK_EN; if (isp->subclk_resources & OMAP3_ISP_SUBCLK_RESIZER) clk |= ISPCTRL_RSZ_CLK_EN; /* NOTE: For CCDC & Preview submodules, we need to affect internal * RAM as well. */ if (isp->subclk_resources & OMAP3_ISP_SUBCLK_CCDC) clk |= ISPCTRL_CCDC_CLK_EN | ISPCTRL_CCDC_RAM_EN; if (isp->subclk_resources & OMAP3_ISP_SUBCLK_PREVIEW) clk |= ISPCTRL_PREV_CLK_EN | ISPCTRL_PREV_RAM_EN; isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, ISPCTRL_CLKS_MASK, clk); } void omap3isp_subclk_enable(struct isp_device *isp, enum isp_subclk_resource res) { isp->subclk_resources |= res; __isp_subclk_update(isp); } void omap3isp_subclk_disable(struct isp_device *isp, enum isp_subclk_resource res) { isp->subclk_resources &= ~res; __isp_subclk_update(isp); } /* * isp_enable_clocks - Enable ISP clocks * @isp: OMAP3 ISP device * * Return 0 if successful, or clk_enable return value if any of tthem fails. */ static int isp_enable_clocks(struct isp_device *isp) { int r; unsigned long rate; int divisor; /* * cam_mclk clock chain: * dpll4 -> dpll4_m5 -> dpll4_m5x2 -> cam_mclk * * In OMAP3630 dpll4_m5x2 != 2 x dpll4_m5 but both are * set to the same value. Hence the rate set for dpll4_m5 * has to be twice of what is set on OMAP3430 to get * the required value for cam_mclk */ if (cpu_is_omap3630()) divisor = 1; else divisor = 2; r = clk_enable(isp->clock[ISP_CLK_CAM_ICK]); if (r) { dev_err(isp->dev, "clk_enable cam_ick failed\n"); goto out_clk_enable_ick; } r = clk_set_rate(isp->clock[ISP_CLK_DPLL4_M5_CK], CM_CAM_MCLK_HZ/divisor); if (r) { dev_err(isp->dev, "clk_set_rate for dpll4_m5_ck failed\n"); goto out_clk_enable_mclk; } r = clk_enable(isp->clock[ISP_CLK_CAM_MCLK]); if (r) { dev_err(isp->dev, "clk_enable cam_mclk failed\n"); goto out_clk_enable_mclk; } rate = clk_get_rate(isp->clock[ISP_CLK_CAM_MCLK]); if (rate != CM_CAM_MCLK_HZ) dev_warn(isp->dev, "unexpected cam_mclk rate:\n" " expected : %d\n" " actual : %ld\n", CM_CAM_MCLK_HZ, rate); r = clk_enable(isp->clock[ISP_CLK_CSI2_FCK]); if (r) { dev_err(isp->dev, "clk_enable csi2_fck failed\n"); goto out_clk_enable_csi2_fclk; } return 0; out_clk_enable_csi2_fclk: clk_disable(isp->clock[ISP_CLK_CAM_MCLK]); out_clk_enable_mclk: clk_disable(isp->clock[ISP_CLK_CAM_ICK]); out_clk_enable_ick: return r; } /* * isp_disable_clocks - Disable ISP clocks * @isp: OMAP3 ISP device */ static void isp_disable_clocks(struct isp_device *isp) { clk_disable(isp->clock[ISP_CLK_CAM_ICK]); clk_disable(isp->clock[ISP_CLK_CAM_MCLK]); clk_disable(isp->clock[ISP_CLK_CSI2_FCK]); } static const char *isp_clocks[] = { "cam_ick", "cam_mclk", "dpll4_m5_ck", "csi2_96m_fck", "l3_ick", }; static void isp_put_clocks(struct isp_device *isp) { unsigned int i; for (i = 0; i < ARRAY_SIZE(isp_clocks); ++i) { if (isp->clock[i]) { clk_put(isp->clock[i]); isp->clock[i] = NULL; } } } static int isp_get_clocks(struct isp_device *isp) { struct clk *clk; unsigned int i; for (i = 0; i < ARRAY_SIZE(isp_clocks); ++i) { clk = clk_get(isp->dev, isp_clocks[i]); if (IS_ERR(clk)) { dev_err(isp->dev, "clk_get %s failed\n", isp_clocks[i]); isp_put_clocks(isp); return PTR_ERR(clk); } isp->clock[i] = clk; } return 0; } /* * omap3isp_get - Acquire the ISP resource. * * Initializes the clocks for the first acquire. * * Increment the reference count on the ISP. If the first reference is taken, * enable clocks and power-up all submodules. * * Return a pointer to the ISP device structure, or NULL if an error occurred. */ struct isp_device *omap3isp_get(struct isp_device *isp) { struct isp_device *__isp = isp; if (isp == NULL) return NULL; mutex_lock(&isp->isp_mutex); if (isp->ref_count > 0) goto out; if (isp_enable_clocks(isp) < 0) { __isp = NULL; goto out; } /* We don't want to restore context before saving it! */ if (isp->has_context) isp_restore_ctx(isp); else isp->has_context = 1; isp_enable_interrupts(isp); out: if (__isp != NULL) isp->ref_count++; mutex_unlock(&isp->isp_mutex); return __isp; } /* * omap3isp_put - Release the ISP * * Decrement the reference count on the ISP. If the last reference is released, * power-down all submodules, disable clocks and free temporary buffers. */ void omap3isp_put(struct isp_device *isp) { if (isp == NULL) return; mutex_lock(&isp->isp_mutex); BUG_ON(isp->ref_count == 0); if (--isp->ref_count == 0) { isp_disable_interrupts(isp); isp_save_ctx(isp); if (isp->needs_reset) { isp_reset(isp); isp->needs_reset = false; } isp_disable_clocks(isp); } mutex_unlock(&isp->isp_mutex); } /* -------------------------------------------------------------------------- * Platform device driver */ /* * omap3isp_print_status - Prints the values of the ISP Control Module registers * @isp: OMAP3 ISP device */ #define ISP_PRINT_REGISTER(isp, name)\ dev_dbg(isp->dev, "###ISP " #name "=0x%08x\n", \ isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_##name)) #define SBL_PRINT_REGISTER(isp, name)\ dev_dbg(isp->dev, "###SBL " #name "=0x%08x\n", \ isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_##name)) void omap3isp_print_status(struct isp_device *isp) { dev_dbg(isp->dev, "-------------ISP Register dump--------------\n"); ISP_PRINT_REGISTER(isp, SYSCONFIG); ISP_PRINT_REGISTER(isp, SYSSTATUS); ISP_PRINT_REGISTER(isp, IRQ0ENABLE); ISP_PRINT_REGISTER(isp, IRQ0STATUS); ISP_PRINT_REGISTER(isp, TCTRL_GRESET_LENGTH); ISP_PRINT_REGISTER(isp, TCTRL_PSTRB_REPLAY); ISP_PRINT_REGISTER(isp, CTRL); ISP_PRINT_REGISTER(isp, TCTRL_CTRL); ISP_PRINT_REGISTER(isp, TCTRL_FRAME); ISP_PRINT_REGISTER(isp, TCTRL_PSTRB_DELAY); ISP_PRINT_REGISTER(isp, TCTRL_STRB_DELAY); ISP_PRINT_REGISTER(isp, TCTRL_SHUT_DELAY); ISP_PRINT_REGISTER(isp, TCTRL_PSTRB_LENGTH); ISP_PRINT_REGISTER(isp, TCTRL_STRB_LENGTH); ISP_PRINT_REGISTER(isp, TCTRL_SHUT_LENGTH); SBL_PRINT_REGISTER(isp, PCR); SBL_PRINT_REGISTER(isp, SDR_REQ_EXP); dev_dbg(isp->dev, "--------------------------------------------\n"); } #ifdef CONFIG_PM /* * Power management support. * * As the ISP can't properly handle an input video stream interruption on a non * frame boundary, the ISP pipelines need to be stopped before sensors get * suspended. However, as suspending the sensors can require a running clock, * which can be provided by the ISP, the ISP can't be completely suspended * before the sensor. * * To solve this problem power management support is split into prepare/complete * and suspend/resume operations. The pipelines are stopped in prepare() and the * ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in * resume(), and the the pipelines are restarted in complete(). * * TODO: PM dependencies between the ISP and sensors are not modeled explicitly * yet. */ static int isp_pm_prepare(struct device *dev) { struct isp_device *isp = dev_get_drvdata(dev); int reset; WARN_ON(mutex_is_locked(&isp->isp_mutex)); if (isp->ref_count == 0) return 0; reset = isp_suspend_modules(isp); isp_disable_interrupts(isp); isp_save_ctx(isp); if (reset) isp_reset(isp); return 0; } static int isp_pm_suspend(struct device *dev) { struct isp_device *isp = dev_get_drvdata(dev); WARN_ON(mutex_is_locked(&isp->isp_mutex)); if (isp->ref_count) isp_disable_clocks(isp); return 0; } static int isp_pm_resume(struct device *dev) { struct isp_device *isp = dev_get_drvdata(dev); if (isp->ref_count == 0) return 0; return isp_enable_clocks(isp); } static void isp_pm_complete(struct device *dev) { struct isp_device *isp = dev_get_drvdata(dev); if (isp->ref_count == 0) return; isp_restore_ctx(isp); isp_enable_interrupts(isp); isp_resume_modules(isp); } #else #define isp_pm_prepare NULL #define isp_pm_suspend NULL #define isp_pm_resume NULL #define isp_pm_complete NULL #endif /* CONFIG_PM */ static void isp_unregister_entities(struct isp_device *isp) { omap3isp_csi2_unregister_entities(&isp->isp_csi2a); omap3isp_ccp2_unregister_entities(&isp->isp_ccp2); omap3isp_ccdc_unregister_entities(&isp->isp_ccdc); omap3isp_preview_unregister_entities(&isp->isp_prev); omap3isp_resizer_unregister_entities(&isp->isp_res); omap3isp_stat_unregister_entities(&isp->isp_aewb); omap3isp_stat_unregister_entities(&isp->isp_af); omap3isp_stat_unregister_entities(&isp->isp_hist); v4l2_device_unregister(&isp->v4l2_dev); media_device_unregister(&isp->media_dev); } /* * isp_register_subdev_group - Register a group of subdevices * @isp: OMAP3 ISP device * @board_info: I2C subdevs board information array * * Register all I2C subdevices in the board_info array. The array must be * terminated by a NULL entry, and the first entry must be the sensor. * * Return a pointer to the sensor media entity if it has been successfully * registered, or NULL otherwise. */ static struct v4l2_subdev * isp_register_subdev_group(struct isp_device *isp, struct isp_subdev_i2c_board_info *board_info) { struct v4l2_subdev *sensor = NULL; unsigned int first; if (board_info->board_info == NULL) return NULL; for (first = 1; board_info->board_info; ++board_info, first = 0) { struct v4l2_subdev *subdev; struct i2c_adapter *adapter; adapter = i2c_get_adapter(board_info->i2c_adapter_id); if (adapter == NULL) { printk(KERN_ERR "%s: Unable to get I2C adapter %d for " "device %s\n", __func__, board_info->i2c_adapter_id, board_info->board_info->type); continue; } subdev = v4l2_i2c_new_subdev_board(&isp->v4l2_dev, adapter, board_info->board_info, NULL); if (subdev == NULL) { printk(KERN_ERR "%s: Unable to register subdev %s\n", __func__, board_info->board_info->type); continue; } if (first) sensor = subdev; } return sensor; } static int isp_register_entities(struct isp_device *isp) { struct isp_platform_data *pdata = isp->pdata; struct isp_v4l2_subdevs_group *subdevs; int ret; isp->media_dev.dev = isp->dev; strlcpy(isp->media_dev.model, "TI OMAP3 ISP", sizeof(isp->media_dev.model)); isp->media_dev.link_notify = isp_pipeline_link_notify; ret = media_device_register(&isp->media_dev); if (ret < 0) { printk(KERN_ERR "%s: Media device registration failed (%d)\n", __func__, ret); return ret; } isp->v4l2_dev.mdev = &isp->media_dev; ret = v4l2_device_register(isp->dev, &isp->v4l2_dev); if (ret < 0) { printk(KERN_ERR "%s: V4L2 device registration failed (%d)\n", __func__, ret); goto done; } /* Register internal entities */ ret = omap3isp_ccp2_register_entities(&isp->isp_ccp2, &isp->v4l2_dev); if (ret < 0) goto done; ret = omap3isp_csi2_register_entities(&isp->isp_csi2a, &isp->v4l2_dev); if (ret < 0) goto done; ret = omap3isp_ccdc_register_entities(&isp->isp_ccdc, &isp->v4l2_dev); if (ret < 0) goto done; ret = omap3isp_preview_register_entities(&isp->isp_prev, &isp->v4l2_dev); if (ret < 0) goto done; ret = omap3isp_resizer_register_entities(&isp->isp_res, &isp->v4l2_dev); if (ret < 0) goto done; ret = omap3isp_stat_register_entities(&isp->isp_aewb, &isp->v4l2_dev); if (ret < 0) goto done; ret = omap3isp_stat_register_entities(&isp->isp_af, &isp->v4l2_dev); if (ret < 0) goto done; ret = omap3isp_stat_register_entities(&isp->isp_hist, &isp->v4l2_dev); if (ret < 0) goto done; /* Register external entities */ for (subdevs = pdata->subdevs; subdevs && subdevs->subdevs; ++subdevs) { struct v4l2_subdev *sensor; struct media_entity *input; unsigned int flags; unsigned int pad; sensor = isp_register_subdev_group(isp, subdevs->subdevs); if (sensor == NULL) continue; sensor->host_priv = subdevs; /* Connect the sensor to the correct interface module. Parallel * sensors are connected directly to the CCDC, while serial * sensors are connected to the CSI2a, CCP2b or CSI2c receiver * through CSIPHY1 or CSIPHY2. */ switch (subdevs->interface) { case ISP_INTERFACE_PARALLEL: input = &isp->isp_ccdc.subdev.entity; pad = CCDC_PAD_SINK; flags = 0; break; case ISP_INTERFACE_CSI2A_PHY2: input = &isp->isp_csi2a.subdev.entity; pad = CSI2_PAD_SINK; flags = MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED; break; case ISP_INTERFACE_CCP2B_PHY1: case ISP_INTERFACE_CCP2B_PHY2: input = &isp->isp_ccp2.subdev.entity; pad = CCP2_PAD_SINK; flags = 0; break; case ISP_INTERFACE_CSI2C_PHY1: input = &isp->isp_csi2c.subdev.entity; pad = CSI2_PAD_SINK; flags = MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED; break; default: printk(KERN_ERR "%s: invalid interface type %u\n", __func__, subdevs->interface); ret = -EINVAL; goto done; } ret = media_entity_create_link(&sensor->entity, 0, input, pad, flags); if (ret < 0) goto done; } ret = v4l2_device_register_subdev_nodes(&isp->v4l2_dev); done: if (ret < 0) isp_unregister_entities(isp); return ret; } static void isp_cleanup_modules(struct isp_device *isp) { omap3isp_h3a_aewb_cleanup(isp); omap3isp_h3a_af_cleanup(isp); omap3isp_hist_cleanup(isp); omap3isp_resizer_cleanup(isp); omap3isp_preview_cleanup(isp); omap3isp_ccdc_cleanup(isp); omap3isp_ccp2_cleanup(isp); omap3isp_csi2_cleanup(isp); } static int isp_initialize_modules(struct isp_device *isp) { int ret; ret = omap3isp_csiphy_init(isp); if (ret < 0) { dev_err(isp->dev, "CSI PHY initialization failed\n"); goto error_csiphy; } ret = omap3isp_csi2_init(isp); if (ret < 0) { dev_err(isp->dev, "CSI2 initialization failed\n"); goto error_csi2; } ret = omap3isp_ccp2_init(isp); if (ret < 0) { dev_err(isp->dev, "CCP2 initialization failed\n"); goto error_ccp2; } ret = omap3isp_ccdc_init(isp); if (ret < 0) { dev_err(isp->dev, "CCDC initialization failed\n"); goto error_ccdc; } ret = omap3isp_preview_init(isp); if (ret < 0) { dev_err(isp->dev, "Preview initialization failed\n"); goto error_preview; } ret = omap3isp_resizer_init(isp); if (ret < 0) { dev_err(isp->dev, "Resizer initialization failed\n"); goto error_resizer; } ret = omap3isp_hist_init(isp); if (ret < 0) { dev_err(isp->dev, "Histogram initialization failed\n"); goto error_hist; } ret = omap3isp_h3a_aewb_init(isp); if (ret < 0) { dev_err(isp->dev, "H3A AEWB initialization failed\n"); goto error_h3a_aewb; } ret = omap3isp_h3a_af_init(isp); if (ret < 0) { dev_err(isp->dev, "H3A AF initialization failed\n"); goto error_h3a_af; } /* Connect the submodules. */ ret = media_entity_create_link( &isp->isp_csi2a.subdev.entity, CSI2_PAD_SOURCE, &isp->isp_ccdc.subdev.entity, CCDC_PAD_SINK, 0); if (ret < 0) goto error_link; ret = media_entity_create_link( &isp->isp_ccp2.subdev.entity, CCP2_PAD_SOURCE, &isp->isp_ccdc.subdev.entity, CCDC_PAD_SINK, 0); if (ret < 0) goto error_link; ret = media_entity_create_link( &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP, &isp->isp_prev.subdev.entity, PREV_PAD_SINK, 0); if (ret < 0) goto error_link; ret = media_entity_create_link( &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_OF, &isp->isp_res.subdev.entity, RESZ_PAD_SINK, 0); if (ret < 0) goto error_link; ret = media_entity_create_link( &isp->isp_prev.subdev.entity, PREV_PAD_SOURCE, &isp->isp_res.subdev.entity, RESZ_PAD_SINK, 0); if (ret < 0) goto error_link; ret = media_entity_create_link( &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP, &isp->isp_aewb.subdev.entity, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); if (ret < 0) goto error_link; ret = media_entity_create_link( &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP, &isp->isp_af.subdev.entity, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); if (ret < 0) goto error_link; ret = media_entity_create_link( &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP, &isp->isp_hist.subdev.entity, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); if (ret < 0) goto error_link; return 0; error_link: omap3isp_h3a_af_cleanup(isp); error_h3a_af: omap3isp_h3a_aewb_cleanup(isp); error_h3a_aewb: omap3isp_hist_cleanup(isp); error_hist: omap3isp_resizer_cleanup(isp); error_resizer: omap3isp_preview_cleanup(isp); error_preview: omap3isp_ccdc_cleanup(isp); error_ccdc: omap3isp_ccp2_cleanup(isp); error_ccp2: omap3isp_csi2_cleanup(isp); error_csi2: error_csiphy: return ret; } /* * isp_remove - Remove ISP platform device * @pdev: Pointer to ISP platform device * * Always returns 0. */ static int isp_remove(struct platform_device *pdev) { struct isp_device *isp = platform_get_drvdata(pdev); int i; isp_unregister_entities(isp); isp_cleanup_modules(isp); omap3isp_get(isp); iommu_detach_device(isp->domain, isp->iommu_dev); iommu_domain_free(isp->domain); omap3isp_put(isp); free_irq(isp->irq_num, isp); isp_put_clocks(isp); for (i = 0; i < OMAP3_ISP_IOMEM_LAST; i++) { if (isp->mmio_base[i]) { iounmap(isp->mmio_base[i]); isp->mmio_base[i] = NULL; } if (isp->mmio_base_phys[i]) { release_mem_region(isp->mmio_base_phys[i], isp->mmio_size[i]); isp->mmio_base_phys[i] = 0; } } regulator_put(isp->isp_csiphy1.vdd); regulator_put(isp->isp_csiphy2.vdd); kfree(isp); return 0; } static int isp_map_mem_resource(struct platform_device *pdev, struct isp_device *isp, enum isp_mem_resources res) { struct resource *mem; /* request the mem region for the camera registers */ mem = platform_get_resource(pdev, IORESOURCE_MEM, res); if (!mem) { dev_err(isp->dev, "no mem resource?\n"); return -ENODEV; } if (!request_mem_region(mem->start, resource_size(mem), pdev->name)) { dev_err(isp->dev, "cannot reserve camera register I/O region\n"); return -ENODEV; } isp->mmio_base_phys[res] = mem->start; isp->mmio_size[res] = resource_size(mem); /* map the region */ isp->mmio_base[res] = ioremap_nocache(isp->mmio_base_phys[res], isp->mmio_size[res]); if (!isp->mmio_base[res]) { dev_err(isp->dev, "cannot map camera register I/O region\n"); return -ENODEV; } return 0; } /* * isp_probe - Probe ISP platform device * @pdev: Pointer to ISP platform device * * Returns 0 if successful, * -ENOMEM if no memory available, * -ENODEV if no platform device resources found * or no space for remapping registers, * -EINVAL if couldn't install ISR, * or clk_get return error value. */ static int isp_probe(struct platform_device *pdev) { struct isp_platform_data *pdata = pdev->dev.platform_data; struct isp_device *isp; int ret; int i, m; if (pdata == NULL) return -EINVAL; isp = kzalloc(sizeof(*isp), GFP_KERNEL); if (!isp) { dev_err(&pdev->dev, "could not allocate memory\n"); return -ENOMEM; } isp->autoidle = autoidle; isp->platform_cb.set_xclk = isp_set_xclk; isp->platform_cb.set_pixel_clock = isp_set_pixel_clock; mutex_init(&isp->isp_mutex); spin_lock_init(&isp->stat_lock); isp->dev = &pdev->dev; isp->pdata = pdata; isp->ref_count = 0; isp->raw_dmamask = DMA_BIT_MASK(32); isp->dev->dma_mask = &isp->raw_dmamask; isp->dev->coherent_dma_mask = DMA_BIT_MASK(32); platform_set_drvdata(pdev, isp); /* Regulators */ isp->isp_csiphy1.vdd = regulator_get(&pdev->dev, "VDD_CSIPHY1"); isp->isp_csiphy2.vdd = regulator_get(&pdev->dev, "VDD_CSIPHY2"); /* Clocks */ ret = isp_map_mem_resource(pdev, isp, OMAP3_ISP_IOMEM_MAIN); if (ret < 0) goto error; ret = isp_get_clocks(isp); if (ret < 0) goto error; if (omap3isp_get(isp) == NULL) goto error; ret = isp_reset(isp); if (ret < 0) goto error_isp; /* Memory resources */ isp->revision = isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_REVISION); dev_info(isp->dev, "Revision %d.%d found\n", (isp->revision & 0xf0) >> 4, isp->revision & 0x0f); for (m = 0; m < ARRAY_SIZE(isp_res_maps); m++) if (isp->revision == isp_res_maps[m].isp_rev) break; if (m == ARRAY_SIZE(isp_res_maps)) { dev_err(isp->dev, "No resource map found for ISP rev %d.%d\n", (isp->revision & 0xf0) >> 4, isp->revision & 0xf); ret = -ENODEV; goto error_isp; } for (i = 1; i < OMAP3_ISP_IOMEM_LAST; i++) { if (isp_res_maps[m].map & 1 << i) { ret = isp_map_mem_resource(pdev, isp, i); if (ret) goto error_isp; } } /* IOMMU */ isp->iommu_dev = omap_find_iommu_device("isp"); if (!isp->iommu_dev) { dev_err(isp->dev, "omap_find_iommu_device failed\n"); ret = -ENODEV; goto error_isp; } /* to be removed once iommu migration is complete */ isp->iommu = to_iommu(isp->iommu_dev); isp->domain = iommu_domain_alloc(pdev->dev.bus); if (!isp->domain) { dev_err(isp->dev, "can't alloc iommu domain\n"); ret = -ENOMEM; goto error_isp; } ret = iommu_attach_device(isp->domain, isp->iommu_dev); if (ret) { dev_err(&pdev->dev, "can't attach iommu device: %d\n", ret); goto free_domain; } /* Interrupt */ isp->irq_num = platform_get_irq(pdev, 0); if (isp->irq_num <= 0) { dev_err(isp->dev, "No IRQ resource\n"); ret = -ENODEV; goto detach_dev; } if (request_irq(isp->irq_num, isp_isr, IRQF_SHARED, "OMAP3 ISP", isp)) { dev_err(isp->dev, "Unable to request IRQ\n"); ret = -EINVAL; goto detach_dev; } /* Entities */ ret = isp_initialize_modules(isp); if (ret < 0) goto error_irq; ret = isp_register_entities(isp); if (ret < 0) goto error_modules; isp_power_settings(isp, 1); omap3isp_put(isp); return 0; error_modules: isp_cleanup_modules(isp); error_irq: free_irq(isp->irq_num, isp); detach_dev: iommu_detach_device(isp->domain, isp->iommu_dev); free_domain: iommu_domain_free(isp->domain); error_isp: omap3isp_put(isp); error: isp_put_clocks(isp); for (i = 0; i < OMAP3_ISP_IOMEM_LAST; i++) { if (isp->mmio_base[i]) { iounmap(isp->mmio_base[i]); isp->mmio_base[i] = NULL; } if (isp->mmio_base_phys[i]) { release_mem_region(isp->mmio_base_phys[i], isp->mmio_size[i]); isp->mmio_base_phys[i] = 0; } } regulator_put(isp->isp_csiphy2.vdd); regulator_put(isp->isp_csiphy1.vdd); platform_set_drvdata(pdev, NULL); kfree(isp); return ret; } static const struct dev_pm_ops omap3isp_pm_ops = { .prepare = isp_pm_prepare, .suspend = isp_pm_suspend, .resume = isp_pm_resume, .complete = isp_pm_complete, }; static struct platform_device_id omap3isp_id_table[] = { { "omap3isp", 0 }, { }, }; MODULE_DEVICE_TABLE(platform, omap3isp_id_table); static struct platform_driver omap3isp_driver = { .probe = isp_probe, .remove = isp_remove, .id_table = omap3isp_id_table, .driver = { .owner = THIS_MODULE, .name = "omap3isp", .pm = &omap3isp_pm_ops, }, }; /* * isp_init - ISP module initialization. */ static int __init isp_init(void) { return platform_driver_register(&omap3isp_driver); } /* * isp_cleanup - ISP module cleanup. */ static void __exit isp_cleanup(void) { platform_driver_unregister(&omap3isp_driver); } module_init(isp_init); module_exit(isp_cleanup); MODULE_AUTHOR("Nokia Corporation"); MODULE_DESCRIPTION("TI OMAP3 ISP driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(ISP_VIDEO_DRIVER_VERSION);