/* * OLPC HGPK (XO-1) touchpad PS/2 mouse driver * * Copyright (c) 2006-2008 One Laptop Per Child * Authors: * Zephaniah E. Hull * Andres Salomon * * This driver is partly based on the ALPS driver, which is: * * Copyright (c) 2003 Neil Brown * Copyright (c) 2003-2005 Peter Osterlund * Copyright (c) 2004 Dmitry Torokhov * Copyright (c) 2005 Vojtech Pavlik * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ /* * The spec from ALPS is available from * . It refers to this * device as HGPK (Hybrid GS, PT, and Keymatrix). * * The earliest versions of the device had simultaneous reporting; that * was removed. After that, the device used the Advanced Mode GS/PT streaming * stuff. That turned out to be too buggy to support, so we've finally * switched to Mouse Mode (which utilizes only the center 1/3 of the touchpad). */ #define DEBUG #include #include #include #include #include #include #include "psmouse.h" #include "hgpk.h" static bool tpdebug; module_param(tpdebug, bool, 0644); MODULE_PARM_DESC(tpdebug, "enable debugging, dumping packets to KERN_DEBUG."); static int recalib_delta = 100; module_param(recalib_delta, int, 0644); MODULE_PARM_DESC(recalib_delta, "packets containing a delta this large will cause a recalibration."); static int jumpy_delay = 1000; module_param(jumpy_delay, int, 0644); MODULE_PARM_DESC(jumpy_delay, "delay (ms) before recal after jumpiness detected"); static int spew_delay = 1; module_param(spew_delay, int, 0644); MODULE_PARM_DESC(spew_delay, "delay (ms) before recal after packet spew detected"); static int recal_guard_time = 2000; module_param(recal_guard_time, int, 0644); MODULE_PARM_DESC(recal_guard_time, "interval (ms) during which recal will be restarted if packet received"); static int post_interrupt_delay = 1000; module_param(post_interrupt_delay, int, 0644); MODULE_PARM_DESC(post_interrupt_delay, "delay (ms) before recal after recal interrupt detected"); static char hgpk_mode_name[16]; module_param_string(hgpk_mode, hgpk_mode_name, sizeof(hgpk_mode_name), 0644); MODULE_PARM_DESC(hgpk_mode, "default hgpk mode: mouse, glidesensor or pentablet"); static int hgpk_default_mode = HGPK_MODE_MOUSE; static const char * const hgpk_mode_names[] = { [HGPK_MODE_MOUSE] = "Mouse", [HGPK_MODE_GLIDESENSOR] = "GlideSensor", [HGPK_MODE_PENTABLET] = "PenTablet", }; static int hgpk_mode_from_name(const char *buf, int len) { int i; for (i = 0; i < ARRAY_SIZE(hgpk_mode_names); i++) { const char *name = hgpk_mode_names[i]; if (strlen(name) == len && !strncasecmp(name, buf, len)) return i; } return HGPK_MODE_INVALID; } /* * When the touchpad gets ultra-sensitive, one can keep their finger 1/2" * above the pad and still have it send packets. This causes a jump cursor * when one places their finger on the pad. We can probably detect the * jump as we see a large deltas (>= 100px). In mouse mode, I've been * unable to even come close to 100px deltas during normal usage, so I think * this threshold is safe. If a large delta occurs, trigger a recalibration. */ static void hgpk_jumpy_hack(struct psmouse *psmouse, int x, int y) { struct hgpk_data *priv = psmouse->private; if (abs(x) > recalib_delta || abs(y) > recalib_delta) { hgpk_err(psmouse, ">%dpx jump detected (%d,%d)\n", recalib_delta, x, y); /* My car gets forty rods to the hogshead and that's the * way I likes it! */ psmouse_queue_work(psmouse, &priv->recalib_wq, msecs_to_jiffies(jumpy_delay)); } } static void hgpk_reset_spew_detection(struct hgpk_data *priv) { priv->spew_count = 0; priv->dupe_count = 0; priv->x_tally = 0; priv->y_tally = 0; priv->spew_flag = NO_SPEW; } static void hgpk_reset_hack_state(struct psmouse *psmouse) { struct hgpk_data *priv = psmouse->private; priv->abs_x = priv->abs_y = -1; hgpk_reset_spew_detection(priv); } /* * We have no idea why this particular hardware bug occurs. The touchpad * will randomly start spewing packets without anything touching the * pad. This wouldn't necessarily be bad, but it's indicative of a * severely miscalibrated pad; attempting to use the touchpad while it's * spewing means the cursor will jump all over the place, and act "drunk". * * The packets that are spewed tend to all have deltas between -2 and 2, and * the cursor will move around without really going very far. It will * tend to end up in the same location; if we tally up the changes over * 100 packets, we end up w/ a final delta of close to 0. This happens * pretty regularly when the touchpad is spewing, and is pretty hard to * manually trigger (at least for *my* fingers). So, it makes a perfect * scheme for detecting spews. */ static void hgpk_spewing_hack(struct psmouse *psmouse, int l, int r, int x, int y) { struct hgpk_data *priv = psmouse->private; /* ignore button press packets; many in a row could trigger * a false-positive! */ if (l || r) return; /* don't track spew if the workaround feature has been turned off */ if (!spew_delay) return; if (abs(x) > 3 || abs(y) > 3) { /* no spew, or spew ended */ hgpk_reset_spew_detection(priv); return; } /* Keep a tally of the overall delta to the cursor position caused by * the spew */ priv->x_tally += x; priv->y_tally += y; switch (priv->spew_flag) { case NO_SPEW: /* we're not spewing, but this packet might be the start */ priv->spew_flag = MAYBE_SPEWING; /* fall-through */ case MAYBE_SPEWING: priv->spew_count++; if (priv->spew_count < SPEW_WATCH_COUNT) break; /* excessive spew detected, request recalibration */ priv->spew_flag = SPEW_DETECTED; /* fall-through */ case SPEW_DETECTED: /* only recalibrate when the overall delta to the cursor * is really small. if the spew is causing significant cursor * movement, it is probably a case of the user moving the * cursor very slowly across the screen. */ if (abs(priv->x_tally) < 3 && abs(priv->y_tally) < 3) { hgpk_err(psmouse, "packet spew detected (%d,%d)\n", priv->x_tally, priv->y_tally); priv->spew_flag = RECALIBRATING; psmouse_queue_work(psmouse, &priv->recalib_wq, msecs_to_jiffies(spew_delay)); } break; case RECALIBRATING: /* we already detected a spew and requested a recalibration, * just wait for the queue to kick into action. */ break; } } /* * HGPK Mouse Mode format (standard mouse format, sans middle button) * * byte 0: y-over x-over y-neg x-neg 1 0 swr swl * byte 1: x7 x6 x5 x4 x3 x2 x1 x0 * byte 2: y7 y6 y5 y4 y3 y2 y1 y0 * * swr/swl are the left/right buttons. * x-neg/y-neg are the x and y delta negative bits * x-over/y-over are the x and y overflow bits * * --- * * HGPK Advanced Mode - single-mode format * * byte 0(PT): 1 1 0 0 1 1 1 1 * byte 0(GS): 1 1 1 1 1 1 1 1 * byte 1: 0 x6 x5 x4 x3 x2 x1 x0 * byte 2(PT): 0 0 x9 x8 x7 ? pt-dsw 0 * byte 2(GS): 0 x10 x9 x8 x7 ? gs-dsw pt-dsw * byte 3: 0 y9 y8 y7 1 0 swr swl * byte 4: 0 y6 y5 y4 y3 y2 y1 y0 * byte 5: 0 z6 z5 z4 z3 z2 z1 z0 * * ?'s are not defined in the protocol spec, may vary between models. * * swr/swl are the left/right buttons. * * pt-dsw/gs-dsw indicate that the pt/gs sensor is detecting a * pen/finger */ static bool hgpk_is_byte_valid(struct psmouse *psmouse, unsigned char *packet) { struct hgpk_data *priv = psmouse->private; int pktcnt = psmouse->pktcnt; bool valid; switch (priv->mode) { case HGPK_MODE_MOUSE: valid = (packet[0] & 0x0C) == 0x08; break; case HGPK_MODE_GLIDESENSOR: valid = pktcnt == 1 ? packet[0] == HGPK_GS : !(packet[pktcnt - 1] & 0x80); break; case HGPK_MODE_PENTABLET: valid = pktcnt == 1 ? packet[0] == HGPK_PT : !(packet[pktcnt - 1] & 0x80); break; default: valid = false; break; } if (!valid) hgpk_dbg(psmouse, "bad data, mode %d (%d) %02x %02x %02x %02x %02x %02x\n", priv->mode, pktcnt, psmouse->packet[0], psmouse->packet[1], psmouse->packet[2], psmouse->packet[3], psmouse->packet[4], psmouse->packet[5]); return valid; } static void hgpk_process_advanced_packet(struct psmouse *psmouse) { struct hgpk_data *priv = psmouse->private; struct input_dev *idev = psmouse->dev; unsigned char *packet = psmouse->packet; int down = !!(packet[2] & 2); int left = !!(packet[3] & 1); int right = !!(packet[3] & 2); int x = packet[1] | ((packet[2] & 0x78) << 4); int y = packet[4] | ((packet[3] & 0x70) << 3); if (priv->mode == HGPK_MODE_GLIDESENSOR) { int pt_down = !!(packet[2] & 1); int finger_down = !!(packet[2] & 2); int z = packet[5]; input_report_abs(idev, ABS_PRESSURE, z); if (tpdebug) hgpk_dbg(psmouse, "pd=%d fd=%d z=%d", pt_down, finger_down, z); } else { /* * PenTablet mode does not report pressure, so we don't * report it here */ if (tpdebug) hgpk_dbg(psmouse, "pd=%d ", down); } if (tpdebug) hgpk_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", left, right, x, y); input_report_key(idev, BTN_TOUCH, down); input_report_key(idev, BTN_LEFT, left); input_report_key(idev, BTN_RIGHT, right); /* * If this packet says that the finger was removed, reset our position * tracking so that we don't erroneously detect a jump on next press. */ if (!down) { hgpk_reset_hack_state(priv); goto done; } /* * Weed out duplicate packets (we get quite a few, and they mess up * our jump detection) */ if (x == priv->abs_x && y == priv->abs_y) { if (++priv->dupe_count > SPEW_WATCH_COUNT) { if (tpdebug) hgpk_dbg(psmouse, "hard spew detected\n"); priv->spew_flag = RECALIBRATING; psmouse_queue_work(psmouse, &priv->recalib_wq, msecs_to_jiffies(spew_delay)); } goto done; } /* not a duplicate, continue with position reporting */ priv->dupe_count = 0; /* Don't apply hacks in PT mode, it seems reliable */ if (priv->mode != HGPK_MODE_PENTABLET && priv->abs_x != -1) { hgpk_jumpy_hack(psmouse, priv->abs_x - x, priv->abs_y - y); hgpk_spewing_hack(psmouse, left, right, priv->abs_x - x, priv->abs_y - y); } input_report_abs(idev, ABS_X, x); input_report_abs(idev, ABS_Y, y); priv->abs_x = x; priv->abs_y = y; done: input_sync(idev); } static void hgpk_process_simple_packet(struct psmouse *psmouse) { struct input_dev *dev = psmouse->dev; unsigned char *packet = psmouse->packet; int left = packet[0] & 1; int right = (packet[0] >> 1) & 1; int x = packet[1] - ((packet[0] << 4) & 0x100); int y = ((packet[0] << 3) & 0x100) - packet[2]; hgpk_jumpy_hack(psmouse, x, y); hgpk_spewing_hack(psmouse, left, right, x, y); if (tpdebug) hgpk_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", left, right, x, y); input_report_key(dev, BTN_LEFT, left); input_report_key(dev, BTN_RIGHT, right); input_report_rel(dev, REL_X, x); input_report_rel(dev, REL_Y, y); input_sync(dev); } static psmouse_ret_t hgpk_process_byte(struct psmouse *psmouse) { struct hgpk_data *priv = psmouse->private; if (!hgpk_is_byte_valid(psmouse, psmouse->packet)) return PSMOUSE_BAD_DATA; if (psmouse->pktcnt >= psmouse->pktsize) { if (priv->mode == HGPK_MODE_MOUSE) hgpk_process_simple_packet(psmouse); else hgpk_process_advanced_packet(psmouse); return PSMOUSE_FULL_PACKET; } if (priv->recalib_window) { if (time_before(jiffies, priv->recalib_window)) { /* * ugh, got a packet inside our recalibration * window, schedule another recalibration. */ hgpk_dbg(psmouse, "packet inside calibration window, " "queueing another recalibration\n"); psmouse_queue_work(psmouse, &priv->recalib_wq, msecs_to_jiffies(post_interrupt_delay)); } priv->recalib_window = 0; } return PSMOUSE_GOOD_DATA; } static int hgpk_select_mode(struct psmouse *psmouse) { struct ps2dev *ps2dev = &psmouse->ps2dev; struct hgpk_data *priv = psmouse->private; int i; int cmd; /* * 4 disables to enable advanced mode * then 3 0xf2 bytes as the preamble for GS/PT selection */ const int advanced_init[] = { PSMOUSE_CMD_DISABLE, PSMOUSE_CMD_DISABLE, PSMOUSE_CMD_DISABLE, PSMOUSE_CMD_DISABLE, 0xf2, 0xf2, 0xf2, }; switch (priv->mode) { case HGPK_MODE_MOUSE: psmouse->pktsize = 3; break; case HGPK_MODE_GLIDESENSOR: case HGPK_MODE_PENTABLET: psmouse->pktsize = 6; /* Switch to 'Advanced mode.', four disables in a row. */ for (i = 0; i < ARRAY_SIZE(advanced_init); i++) if (ps2_command(ps2dev, NULL, advanced_init[i])) return -EIO; /* select between GlideSensor (mouse) or PenTablet */ cmd = priv->mode == HGPK_MODE_GLIDESENSOR ? PSMOUSE_CMD_SETSCALE11 : PSMOUSE_CMD_SETSCALE21; if (ps2_command(ps2dev, NULL, cmd)) return -EIO; break; default: return -EINVAL; } return 0; } static void hgpk_setup_input_device(struct input_dev *input, struct input_dev *old_input, enum hgpk_mode mode) { if (old_input) { input->name = old_input->name; input->phys = old_input->phys; input->id = old_input->id; input->dev.parent = old_input->dev.parent; } memset(input->evbit, 0, sizeof(input->evbit)); memset(input->relbit, 0, sizeof(input->relbit)); memset(input->keybit, 0, sizeof(input->keybit)); /* All modes report left and right buttons */ __set_bit(EV_KEY, input->evbit); __set_bit(BTN_LEFT, input->keybit); __set_bit(BTN_RIGHT, input->keybit); switch (mode) { case HGPK_MODE_MOUSE: __set_bit(EV_REL, input->evbit); __set_bit(REL_X, input->relbit); __set_bit(REL_Y, input->relbit); break; case HGPK_MODE_GLIDESENSOR: __set_bit(BTN_TOUCH, input->keybit); __set_bit(BTN_TOOL_FINGER, input->keybit); __set_bit(EV_ABS, input->evbit); /* GlideSensor has pressure sensor, PenTablet does not */ input_set_abs_params(input, ABS_PRESSURE, 0, 15, 0, 0); /* From device specs */ input_set_abs_params(input, ABS_X, 0, 399, 0, 0); input_set_abs_params(input, ABS_Y, 0, 290, 0, 0); /* Calculated by hand based on usable size (52mm x 38mm) */ input_abs_set_res(input, ABS_X, 8); input_abs_set_res(input, ABS_Y, 8); break; case HGPK_MODE_PENTABLET: __set_bit(BTN_TOUCH, input->keybit); __set_bit(BTN_TOOL_FINGER, input->keybit); __set_bit(EV_ABS, input->evbit); /* From device specs */ input_set_abs_params(input, ABS_X, 0, 999, 0, 0); input_set_abs_params(input, ABS_Y, 5, 239, 0, 0); /* Calculated by hand based on usable size (156mm x 38mm) */ input_abs_set_res(input, ABS_X, 6); input_abs_set_res(input, ABS_Y, 8); break; default: BUG(); } } static int hgpk_reset_device(struct psmouse *psmouse, bool recalibrate) { int err; psmouse_reset(psmouse); if (recalibrate) { struct ps2dev *ps2dev = &psmouse->ps2dev; /* send the recalibrate request */ if (ps2_command(ps2dev, NULL, 0xf5) || ps2_command(ps2dev, NULL, 0xf5) || ps2_command(ps2dev, NULL, 0xe6) || ps2_command(ps2dev, NULL, 0xf5)) { return -1; } /* according to ALPS, 150mS is required for recalibration */ msleep(150); } err = hgpk_select_mode(psmouse); if (err) { hgpk_err(psmouse, "failed to select mode\n"); return err; } hgpk_reset_hack_state(psmouse); return 0; } static int hgpk_force_recalibrate(struct psmouse *psmouse) { struct ps2dev *ps2dev = &psmouse->ps2dev; struct hgpk_data *priv = psmouse->private; int err; /* C-series touchpads added the recalibrate command */ if (psmouse->model < HGPK_MODEL_C) return 0; /* we don't want to race with the irq handler, nor with resyncs */ psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); /* start by resetting the device */ err = hgpk_reset_device(psmouse, true); if (err) return err; /* * XXX: If a finger is down during this delay, recalibration will * detect capacitance incorrectly. This is a hardware bug, and * we don't have a good way to deal with it. The 2s window stuff * (below) is our best option for now. */ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) return -1; psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); /* * After we recalibrate, we shouldn't get any packets for 2s. If * we do, it's likely that someone's finger was on the touchpad. * If someone's finger *was* on the touchpad, it's probably * miscalibrated. So, we should schedule another recalibration */ priv->recalib_window = jiffies + msecs_to_jiffies(recal_guard_time); return 0; } /* * This kills power to the touchpad; according to ALPS, current consumption * goes down to 50uA after running this. To turn power back on, we drive * MS-DAT low. */ static int hgpk_toggle_power(struct psmouse *psmouse, int enable) { struct ps2dev *ps2dev = &psmouse->ps2dev; int timeo; int err; /* Added on D-series touchpads */ if (psmouse->model < HGPK_MODEL_D) return 0; if (enable) { psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); /* * Sending a byte will drive MS-DAT low; this will wake up * the controller. Once we get an ACK back from it, it * means we can continue with the touchpad re-init. ALPS * tells us that 1s should be long enough, so set that as * the upper bound. */ for (timeo = 20; timeo > 0; timeo--) { if (!ps2_sendbyte(&psmouse->ps2dev, PSMOUSE_CMD_DISABLE, 20)) break; msleep(50); } err = hgpk_reset_device(psmouse, false); if (err) { hgpk_err(psmouse, "Failed to reset device!\n"); return err; } /* should be all set, enable the touchpad */ ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE); psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); } else { hgpk_dbg(psmouse, "Powering off touchpad.\n"); psmouse_set_state(psmouse, PSMOUSE_IGNORE); if (ps2_command(ps2dev, NULL, 0xec) || ps2_command(ps2dev, NULL, 0xec) || ps2_command(ps2dev, NULL, 0xea)) { return -1; } /* probably won't see an ACK, the touchpad will be off */ ps2_sendbyte(&psmouse->ps2dev, 0xec, 20); } return 0; } static int hgpk_poll(struct psmouse *psmouse) { /* We can't poll, so always return failure. */ return -1; } static int hgpk_reconnect(struct psmouse *psmouse) { /* * During suspend/resume the ps2 rails remain powered. We don't want * to do a reset because it's flush data out of buffers; however, * earlier prototypes (B1) had some brokenness that required a reset. */ if (olpc_board_at_least(olpc_board(0xb2))) if (psmouse->ps2dev.serio->dev.power.power_state.event != PM_EVENT_ON) return 0; return hgpk_reset_device(psmouse, false); } static ssize_t hgpk_show_powered(struct psmouse *psmouse, void *data, char *buf) { struct hgpk_data *priv = psmouse->private; return sprintf(buf, "%d\n", priv->powered); } static ssize_t hgpk_set_powered(struct psmouse *psmouse, void *data, const char *buf, size_t count) { struct hgpk_data *priv = psmouse->private; unsigned long value; int err; err = strict_strtoul(buf, 10, &value); if (err || value > 1) return -EINVAL; if (value != priv->powered) { /* * hgpk_toggle_power will deal w/ state so * we're not racing w/ irq */ err = hgpk_toggle_power(psmouse, value); if (!err) priv->powered = value; } return err ? err : count; } __PSMOUSE_DEFINE_ATTR(powered, S_IWUSR | S_IRUGO, NULL, hgpk_show_powered, hgpk_set_powered, false); static ssize_t attr_show_mode(struct psmouse *psmouse, void *data, char *buf) { struct hgpk_data *priv = psmouse->private; return sprintf(buf, "%s\n", hgpk_mode_names[priv->mode]); } static ssize_t attr_set_mode(struct psmouse *psmouse, void *data, const char *buf, size_t len) { struct hgpk_data *priv = psmouse->private; enum hgpk_mode old_mode = priv->mode; enum hgpk_mode new_mode = hgpk_mode_from_name(buf, len); struct input_dev *old_dev = psmouse->dev; struct input_dev *new_dev; int err; if (new_mode == HGPK_MODE_INVALID) return -EINVAL; if (old_mode == new_mode) return len; new_dev = input_allocate_device(); if (!new_dev) return -ENOMEM; psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); /* Switch device into the new mode */ priv->mode = new_mode; err = hgpk_reset_device(psmouse, false); if (err) goto err_try_restore; hgpk_setup_input_device(new_dev, old_dev, new_mode); psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); err = input_register_device(new_dev); if (err) goto err_try_restore; psmouse->dev = new_dev; input_unregister_device(old_dev); return len; err_try_restore: input_free_device(new_dev); priv->mode = old_mode; hgpk_reset_device(psmouse, false); return err; } PSMOUSE_DEFINE_ATTR(hgpk_mode, S_IWUSR | S_IRUGO, NULL, attr_show_mode, attr_set_mode); static ssize_t hgpk_trigger_recal_show(struct psmouse *psmouse, void *data, char *buf) { return -EINVAL; } static ssize_t hgpk_trigger_recal(struct psmouse *psmouse, void *data, const char *buf, size_t count) { struct hgpk_data *priv = psmouse->private; unsigned long value; int err; err = strict_strtoul(buf, 10, &value); if (err || value != 1) return -EINVAL; /* * We queue work instead of doing recalibration right here * to avoid adding locking to to hgpk_force_recalibrate() * since workqueue provides serialization. */ psmouse_queue_work(psmouse, &priv->recalib_wq, 0); return count; } __PSMOUSE_DEFINE_ATTR(recalibrate, S_IWUSR | S_IRUGO, NULL, hgpk_trigger_recal_show, hgpk_trigger_recal, false); static void hgpk_disconnect(struct psmouse *psmouse) { struct hgpk_data *priv = psmouse->private; device_remove_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_powered.dattr); device_remove_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_hgpk_mode.dattr); if (psmouse->model >= HGPK_MODEL_C) device_remove_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_recalibrate.dattr); psmouse_reset(psmouse); kfree(priv); } static void hgpk_recalib_work(struct work_struct *work) { struct delayed_work *w = to_delayed_work(work); struct hgpk_data *priv = container_of(w, struct hgpk_data, recalib_wq); struct psmouse *psmouse = priv->psmouse; hgpk_dbg(psmouse, "recalibrating touchpad..\n"); if (hgpk_force_recalibrate(psmouse)) hgpk_err(psmouse, "recalibration failed!\n"); } static int hgpk_register(struct psmouse *psmouse) { struct hgpk_data *priv = psmouse->private; int err; /* register handlers */ psmouse->protocol_handler = hgpk_process_byte; psmouse->poll = hgpk_poll; psmouse->disconnect = hgpk_disconnect; psmouse->reconnect = hgpk_reconnect; /* Disable the idle resync. */ psmouse->resync_time = 0; /* Reset after a lot of bad bytes. */ psmouse->resetafter = 1024; hgpk_setup_input_device(psmouse->dev, NULL, priv->mode); err = device_create_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_powered.dattr); if (err) { hgpk_err(psmouse, "Failed creating 'powered' sysfs node\n"); return err; } err = device_create_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_hgpk_mode.dattr); if (err) { hgpk_err(psmouse, "Failed creating 'hgpk_mode' sysfs node\n"); goto err_remove_powered; } /* C-series touchpads added the recalibrate command */ if (psmouse->model >= HGPK_MODEL_C) { err = device_create_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_recalibrate.dattr); if (err) { hgpk_err(psmouse, "Failed creating 'recalibrate' sysfs node\n"); goto err_remove_mode; } } return 0; err_remove_mode: device_remove_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_hgpk_mode.dattr); err_remove_powered: device_remove_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_powered.dattr); return err; } int hgpk_init(struct psmouse *psmouse) { struct hgpk_data *priv; int err; priv = kzalloc(sizeof(struct hgpk_data), GFP_KERNEL); if (!priv) { err = -ENOMEM; goto alloc_fail; } psmouse->private = priv; priv->psmouse = psmouse; priv->powered = true; priv->mode = hgpk_default_mode; INIT_DELAYED_WORK(&priv->recalib_wq, hgpk_recalib_work); err = hgpk_reset_device(psmouse, false); if (err) goto init_fail; err = hgpk_register(psmouse); if (err) goto init_fail; return 0; init_fail: kfree(priv); alloc_fail: return err; } static enum hgpk_model_t hgpk_get_model(struct psmouse *psmouse) { struct ps2dev *ps2dev = &psmouse->ps2dev; unsigned char param[3]; /* E7, E7, E7, E9 gets us a 3 byte identifier */ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) { return -EIO; } hgpk_dbg(psmouse, "ID: %02x %02x %02x\n", param[0], param[1], param[2]); /* HGPK signature: 0x67, 0x00, 0x */ if (param[0] != 0x67 || param[1] != 0x00) return -ENODEV; hgpk_info(psmouse, "OLPC touchpad revision 0x%x\n", param[2]); return param[2]; } int hgpk_detect(struct psmouse *psmouse, bool set_properties) { int version; version = hgpk_get_model(psmouse); if (version < 0) return version; if (set_properties) { psmouse->vendor = "ALPS"; psmouse->name = "HGPK"; psmouse->model = version; } return 0; } void hgpk_module_init(void) { hgpk_default_mode = hgpk_mode_from_name(hgpk_mode_name, strlen(hgpk_mode_name)); if (hgpk_default_mode == HGPK_MODE_INVALID) { hgpk_default_mode = HGPK_MODE_MOUSE; strlcpy(hgpk_mode_name, hgpk_mode_names[HGPK_MODE_MOUSE], sizeof(hgpk_mode_name)); } }