/* * Copyright (C) 2012 Invensense, Inc. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and * may be copied, distributed, and modified under those terms. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include /** * struct inv_mpu6050_reg_map - Notable registers. * @sample_rate_div: Divider applied to gyro output rate. * @lpf: Configures internal low pass filter. * @accel_lpf: Configures accelerometer low pass filter. * @user_ctrl: Enables/resets the FIFO. * @fifo_en: Determines which data will appear in FIFO. * @gyro_config: gyro config register. * @accl_config: accel config register * @fifo_count_h: Upper byte of FIFO count. * @fifo_r_w: FIFO register. * @raw_gyro: Address of first gyro register. * @raw_accl: Address of first accel register. * @temperature: temperature register * @int_enable: Interrupt enable register. * @pwr_mgmt_1: Controls chip's power state and clock source. * @pwr_mgmt_2: Controls power state of individual sensors. * @int_pin_cfg; Controls interrupt pin configuration. * @accl_offset: Controls the accelerometer calibration offset. * @gyro_offset: Controls the gyroscope calibration offset. */ struct inv_mpu6050_reg_map { u8 sample_rate_div; u8 lpf; u8 accel_lpf; u8 user_ctrl; u8 fifo_en; u8 gyro_config; u8 accl_config; u8 fifo_count_h; u8 fifo_r_w; u8 raw_gyro; u8 raw_accl; u8 temperature; u8 int_enable; u8 pwr_mgmt_1; u8 pwr_mgmt_2; u8 int_pin_cfg; u8 accl_offset; u8 gyro_offset; }; /*device enum */ enum inv_devices { INV_MPU6050, INV_MPU6500, INV_MPU6000, INV_MPU9150, INV_MPU9250, INV_ICM20608, INV_NUM_PARTS }; /** * struct inv_mpu6050_chip_config - Cached chip configuration data. * @fsr: Full scale range. * @lpf: Digital low pass filter frequency. * @accl_fs: accel full scale range. * @accl_fifo_enable: enable accel data output * @gyro_fifo_enable: enable gyro data output * @fifo_rate: FIFO update rate. */ struct inv_mpu6050_chip_config { unsigned int fsr:2; unsigned int lpf:3; unsigned int accl_fs:2; unsigned int accl_fifo_enable:1; unsigned int gyro_fifo_enable:1; u16 fifo_rate; }; /** * struct inv_mpu6050_hw - Other important hardware information. * @whoami: Self identification byte from WHO_AM_I register * @name: name of the chip. * @reg: register map of the chip. * @config: configuration of the chip. */ struct inv_mpu6050_hw { u8 whoami; u8 *name; const struct inv_mpu6050_reg_map *reg; const struct inv_mpu6050_chip_config *config; }; /* * struct inv_mpu6050_state - Driver state variables. * @TIMESTAMP_FIFO_SIZE: fifo size for timestamp. * @lock: Chip access lock. * @trig: IIO trigger. * @chip_config: Cached attribute information. * @reg: Map of important registers. * @hw: Other hardware-specific information. * @chip_type: chip type. * @time_stamp_lock: spin lock to time stamp. * @plat_data: platform data (deprecated in favor of @orientation). * @orientation: sensor chip orientation relative to main hardware. * @timestamps: kfifo queue to store time stamp. * @map regmap pointer. * @irq interrupt number. */ struct inv_mpu6050_state { #define TIMESTAMP_FIFO_SIZE 16 struct mutex lock; struct iio_trigger *trig; struct inv_mpu6050_chip_config chip_config; const struct inv_mpu6050_reg_map *reg; const struct inv_mpu6050_hw *hw; enum inv_devices chip_type; spinlock_t time_stamp_lock; struct i2c_mux_core *muxc; struct i2c_client *mux_client; unsigned int powerup_count; struct inv_mpu6050_platform_data plat_data; struct iio_mount_matrix orientation; DECLARE_KFIFO(timestamps, long long, TIMESTAMP_FIFO_SIZE); struct regmap *map; int irq; }; /*register and associated bit definition*/ #define INV_MPU6050_REG_ACCEL_OFFSET 0x06 #define INV_MPU6050_REG_GYRO_OFFSET 0x13 #define INV_MPU6050_REG_SAMPLE_RATE_DIV 0x19 #define INV_MPU6050_REG_CONFIG 0x1A #define INV_MPU6050_REG_GYRO_CONFIG 0x1B #define INV_MPU6050_REG_ACCEL_CONFIG 0x1C #define INV_MPU6050_REG_FIFO_EN 0x23 #define INV_MPU6050_BIT_ACCEL_OUT 0x08 #define INV_MPU6050_BITS_GYRO_OUT 0x70 #define INV_MPU6050_REG_INT_ENABLE 0x38 #define INV_MPU6050_BIT_DATA_RDY_EN 0x01 #define INV_MPU6050_BIT_DMP_INT_EN 0x02 #define INV_MPU6050_REG_RAW_ACCEL 0x3B #define INV_MPU6050_REG_TEMPERATURE 0x41 #define INV_MPU6050_REG_RAW_GYRO 0x43 #define INV_MPU6050_REG_USER_CTRL 0x6A #define INV_MPU6050_BIT_FIFO_RST 0x04 #define INV_MPU6050_BIT_DMP_RST 0x08 #define INV_MPU6050_BIT_I2C_MST_EN 0x20 #define INV_MPU6050_BIT_FIFO_EN 0x40 #define INV_MPU6050_BIT_DMP_EN 0x80 #define INV_MPU6050_BIT_I2C_IF_DIS 0x10 #define INV_MPU6050_REG_PWR_MGMT_1 0x6B #define INV_MPU6050_BIT_H_RESET 0x80 #define INV_MPU6050_BIT_SLEEP 0x40 #define INV_MPU6050_BIT_CLK_MASK 0x7 #define INV_MPU6050_REG_PWR_MGMT_2 0x6C #define INV_MPU6050_BIT_PWR_ACCL_STBY 0x38 #define INV_MPU6050_BIT_PWR_GYRO_STBY 0x07 #define INV_MPU6050_REG_FIFO_COUNT_H 0x72 #define INV_MPU6050_REG_FIFO_R_W 0x74 #define INV_MPU6050_BYTES_PER_3AXIS_SENSOR 6 #define INV_MPU6050_FIFO_COUNT_BYTE 2 #define INV_MPU6050_FIFO_THRESHOLD 500 /* mpu6500 registers */ #define INV_MPU6500_REG_ACCEL_CONFIG_2 0x1D #define INV_MPU6500_REG_ACCEL_OFFSET 0x77 /* delay time in milliseconds */ #define INV_MPU6050_POWER_UP_TIME 100 #define INV_MPU6050_TEMP_UP_TIME 100 #define INV_MPU6050_SENSOR_UP_TIME 30 /* delay time in microseconds */ #define INV_MPU6050_REG_UP_TIME_MIN 5000 #define INV_MPU6050_REG_UP_TIME_MAX 10000 #define INV_MPU6050_TEMP_OFFSET 12421 #define INV_MPU6050_TEMP_SCALE 2941 #define INV_MPU6050_MAX_GYRO_FS_PARAM 3 #define INV_MPU6050_MAX_ACCL_FS_PARAM 3 #define INV_MPU6050_THREE_AXIS 3 #define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT 3 #define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT 3 /* 6 + 6 round up and plus 8 */ #define INV_MPU6050_OUTPUT_DATA_SIZE 24 #define INV_MPU6050_REG_INT_PIN_CFG 0x37 #define INV_MPU6050_BIT_BYPASS_EN 0x2 #define INV_MPU6050_INT_PIN_CFG 0 /* init parameters */ #define INV_MPU6050_INIT_FIFO_RATE 50 #define INV_MPU6050_TIME_STAMP_TOR 5 #define INV_MPU6050_MAX_FIFO_RATE 1000 #define INV_MPU6050_MIN_FIFO_RATE 4 #define INV_MPU6050_ONE_K_HZ 1000 #define INV_MPU6050_REG_WHOAMI 117 #define INV_MPU6000_WHOAMI_VALUE 0x68 #define INV_MPU6050_WHOAMI_VALUE 0x68 #define INV_MPU6500_WHOAMI_VALUE 0x70 #define INV_MPU9150_WHOAMI_VALUE 0x68 #define INV_MPU9250_WHOAMI_VALUE 0x71 #define INV_ICM20608_WHOAMI_VALUE 0xAF /* scan element definition */ enum inv_mpu6050_scan { INV_MPU6050_SCAN_ACCL_X, INV_MPU6050_SCAN_ACCL_Y, INV_MPU6050_SCAN_ACCL_Z, INV_MPU6050_SCAN_GYRO_X, INV_MPU6050_SCAN_GYRO_Y, INV_MPU6050_SCAN_GYRO_Z, INV_MPU6050_SCAN_TIMESTAMP, }; enum inv_mpu6050_filter_e { INV_MPU6050_FILTER_256HZ_NOLPF2 = 0, INV_MPU6050_FILTER_188HZ, INV_MPU6050_FILTER_98HZ, INV_MPU6050_FILTER_42HZ, INV_MPU6050_FILTER_20HZ, INV_MPU6050_FILTER_10HZ, INV_MPU6050_FILTER_5HZ, INV_MPU6050_FILTER_2100HZ_NOLPF, NUM_MPU6050_FILTER }; /* IIO attribute address */ enum INV_MPU6050_IIO_ATTR_ADDR { ATTR_GYRO_MATRIX, ATTR_ACCL_MATRIX, }; enum inv_mpu6050_accl_fs_e { INV_MPU6050_FS_02G = 0, INV_MPU6050_FS_04G, INV_MPU6050_FS_08G, INV_MPU6050_FS_16G, NUM_ACCL_FSR }; enum inv_mpu6050_fsr_e { INV_MPU6050_FSR_250DPS = 0, INV_MPU6050_FSR_500DPS, INV_MPU6050_FSR_1000DPS, INV_MPU6050_FSR_2000DPS, NUM_MPU6050_FSR }; enum inv_mpu6050_clock_sel_e { INV_CLK_INTERNAL = 0, INV_CLK_PLL, NUM_CLK }; irqreturn_t inv_mpu6050_irq_handler(int irq, void *p); irqreturn_t inv_mpu6050_read_fifo(int irq, void *p); int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev); void inv_mpu6050_remove_trigger(struct inv_mpu6050_state *st); int inv_reset_fifo(struct iio_dev *indio_dev); int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask); int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val); int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on); int inv_mpu_acpi_create_mux_client(struct i2c_client *client); void inv_mpu_acpi_delete_mux_client(struct i2c_client *client); int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, int (*inv_mpu_bus_setup)(struct iio_dev *), int chip_type); int inv_mpu_core_remove(struct device *dev); extern const struct dev_pm_ops inv_mpu_pmops;