/* * Copyright 2011 Advanced Micro Devices, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. * * Authors: Alex Deucher */ #ifndef SI_H #define SI_H #define TAHITI_RB_BITMAP_WIDTH_PER_SH 2 #define TAHITI_GB_ADDR_CONFIG_GOLDEN 0x12011003 #define VERDE_GB_ADDR_CONFIG_GOLDEN 0x12010002 #define HAINAN_GB_ADDR_CONFIG_GOLDEN 0x02010001 #define SI_MAX_SH_GPRS 256 #define SI_MAX_TEMP_GPRS 16 #define SI_MAX_SH_THREADS 256 #define SI_MAX_SH_STACK_ENTRIES 4096 #define SI_MAX_FRC_EOV_CNT 16384 #define SI_MAX_BACKENDS 8 #define SI_MAX_BACKENDS_MASK 0xFF #define SI_MAX_BACKENDS_PER_SE_MASK 0x0F #define SI_MAX_SIMDS 12 #define SI_MAX_SIMDS_MASK 0x0FFF #define SI_MAX_SIMDS_PER_SE_MASK 0x00FF #define SI_MAX_PIPES 8 #define SI_MAX_PIPES_MASK 0xFF #define SI_MAX_PIPES_PER_SIMD_MASK 0x3F #define SI_MAX_LDS_NUM 0xFFFF #define SI_MAX_TCC 16 #define SI_MAX_TCC_MASK 0xFFFF /* SMC IND accessor regs */ #define SMC_IND_INDEX_0 0x200 #define SMC_IND_DATA_0 0x204 #define SMC_IND_ACCESS_CNTL 0x228 # define AUTO_INCREMENT_IND_0 (1 << 0) #define SMC_MESSAGE_0 0x22c #define SMC_RESP_0 0x230 /* CG IND registers are accessed via SMC indirect space + SMC_CG_IND_START */ #define SMC_CG_IND_START 0xc0030000 #define SMC_CG_IND_END 0xc0040000 #define CG_CGTT_LOCAL_0 0x400 #define CG_CGTT_LOCAL_1 0x401 /* SMC IND registers */ #define SMC_SYSCON_RESET_CNTL 0x80000000 # define RST_REG (1 << 0) #define SMC_SYSCON_CLOCK_CNTL_0 0x80000004 # define CK_DISABLE (1 << 0) # define CKEN (1 << 24) #define VGA_HDP_CONTROL 0x328 #define VGA_MEMORY_DISABLE (1 << 4) #define DCCG_DISP_SLOW_SELECT_REG 0x4fc #define DCCG_DISP1_SLOW_SELECT(x) ((x) << 0) #define DCCG_DISP1_SLOW_SELECT_MASK (7 << 0) #define DCCG_DISP1_SLOW_SELECT_SHIFT 0 #define DCCG_DISP2_SLOW_SELECT(x) ((x) << 4) #define DCCG_DISP2_SLOW_SELECT_MASK (7 << 4) #define DCCG_DISP2_SLOW_SELECT_SHIFT 4 #define CG_SPLL_FUNC_CNTL 0x600 #define SPLL_RESET (1 << 0) #define SPLL_SLEEP (1 << 1) #define SPLL_BYPASS_EN (1 << 3) #define SPLL_REF_DIV(x) ((x) << 4) #define SPLL_REF_DIV_MASK (0x3f << 4) #define SPLL_PDIV_A(x) ((x) << 20) #define SPLL_PDIV_A_MASK (0x7f << 20) #define SPLL_PDIV_A_SHIFT 20 #define CG_SPLL_FUNC_CNTL_2 0x604 #define SCLK_MUX_SEL(x) ((x) << 0) #define SCLK_MUX_SEL_MASK (0x1ff << 0) #define SPLL_CTLREQ_CHG (1 << 23) #define SCLK_MUX_UPDATE (1 << 26) #define CG_SPLL_FUNC_CNTL_3 0x608 #define SPLL_FB_DIV(x) ((x) << 0) #define SPLL_FB_DIV_MASK (0x3ffffff << 0) #define SPLL_FB_DIV_SHIFT 0 #define SPLL_DITHEN (1 << 28) #define CG_SPLL_FUNC_CNTL_4 0x60c #define SPLL_STATUS 0x614 #define SPLL_CHG_STATUS (1 << 1) #define SPLL_CNTL_MODE 0x618 #define SPLL_SW_DIR_CONTROL (1 << 0) # define SPLL_REFCLK_SEL(x) ((x) << 26) # define SPLL_REFCLK_SEL_MASK (3 << 26) #define CG_SPLL_SPREAD_SPECTRUM 0x620 #define SSEN (1 << 0) #define CLK_S(x) ((x) << 4) #define CLK_S_MASK (0xfff << 4) #define CLK_S_SHIFT 4 #define CG_SPLL_SPREAD_SPECTRUM_2 0x624 #define CLK_V(x) ((x) << 0) #define CLK_V_MASK (0x3ffffff << 0) #define CLK_V_SHIFT 0 #define CG_SPLL_AUTOSCALE_CNTL 0x62c # define AUTOSCALE_ON_SS_CLEAR (1 << 9) /* discrete uvd clocks */ #define CG_UPLL_FUNC_CNTL 0x634 # define UPLL_RESET_MASK 0x00000001 # define UPLL_SLEEP_MASK 0x00000002 # define UPLL_BYPASS_EN_MASK 0x00000004 # define UPLL_CTLREQ_MASK 0x00000008 # define UPLL_VCO_MODE_MASK 0x00000600 # define UPLL_REF_DIV_MASK 0x003F0000 # define UPLL_CTLACK_MASK 0x40000000 # define UPLL_CTLACK2_MASK 0x80000000 #define CG_UPLL_FUNC_CNTL_2 0x638 # define UPLL_PDIV_A(x) ((x) << 0) # define UPLL_PDIV_A_MASK 0x0000007F # define UPLL_PDIV_B(x) ((x) << 8) # define UPLL_PDIV_B_MASK 0x00007F00 # define VCLK_SRC_SEL(x) ((x) << 20) # define VCLK_SRC_SEL_MASK 0x01F00000 # define DCLK_SRC_SEL(x) ((x) << 25) # define DCLK_SRC_SEL_MASK 0x3E000000 #define CG_UPLL_FUNC_CNTL_3 0x63C # define UPLL_FB_DIV(x) ((x) << 0) # define UPLL_FB_DIV_MASK 0x01FFFFFF #define CG_UPLL_FUNC_CNTL_4 0x644 # define UPLL_SPARE_ISPARE9 0x00020000 #define CG_UPLL_FUNC_CNTL_5 0x648 # define RESET_ANTI_MUX_MASK 0x00000200 #define CG_UPLL_SPREAD_SPECTRUM 0x650 # define SSEN_MASK 0x00000001 #define MPLL_BYPASSCLK_SEL 0x65c # define MPLL_CLKOUT_SEL(x) ((x) << 8) # define MPLL_CLKOUT_SEL_MASK 0xFF00 #define CG_CLKPIN_CNTL 0x660 # define XTALIN_DIVIDE (1 << 1) # define BCLK_AS_XCLK (1 << 2) #define CG_CLKPIN_CNTL_2 0x664 # define FORCE_BIF_REFCLK_EN (1 << 3) # define MUX_TCLK_TO_XCLK (1 << 8) #define THM_CLK_CNTL 0x66c # define CMON_CLK_SEL(x) ((x) << 0) # define CMON_CLK_SEL_MASK 0xFF # define TMON_CLK_SEL(x) ((x) << 8) # define TMON_CLK_SEL_MASK 0xFF00 #define MISC_CLK_CNTL 0x670 # define DEEP_SLEEP_CLK_SEL(x) ((x) << 0) # define DEEP_SLEEP_CLK_SEL_MASK 0xFF # define ZCLK_SEL(x) ((x) << 8) # define ZCLK_SEL_MASK 0xFF00 #define CG_THERMAL_CTRL 0x700 #define DPM_EVENT_SRC(x) ((x) << 0) #define DPM_EVENT_SRC_MASK (7 << 0) #define DIG_THERM_DPM(x) ((x) << 14) #define DIG_THERM_DPM_MASK 0x003FC000 #define DIG_THERM_DPM_SHIFT 14 #define CG_THERMAL_STATUS 0x704 #define FDO_PWM_DUTY(x) ((x) << 9) #define FDO_PWM_DUTY_MASK (0xff << 9) #define FDO_PWM_DUTY_SHIFT 9 #define CG_THERMAL_INT 0x708 #define DIG_THERM_INTH(x) ((x) << 8) #define DIG_THERM_INTH_MASK 0x0000FF00 #define DIG_THERM_INTH_SHIFT 8 #define DIG_THERM_INTL(x) ((x) << 16) #define DIG_THERM_INTL_MASK 0x00FF0000 #define DIG_THERM_INTL_SHIFT 16 #define THERM_INT_MASK_HIGH (1 << 24) #define THERM_INT_MASK_LOW (1 << 25) #define CG_MULT_THERMAL_CTRL 0x710 #define TEMP_SEL(x) ((x) << 20) #define TEMP_SEL_MASK (0xff << 20) #define TEMP_SEL_SHIFT 20 #define CG_MULT_THERMAL_STATUS 0x714 #define ASIC_MAX_TEMP(x) ((x) << 0) #define ASIC_MAX_TEMP_MASK 0x000001ff #define ASIC_MAX_TEMP_SHIFT 0 #define CTF_TEMP(x) ((x) << 9) #define CTF_TEMP_MASK 0x0003fe00 #define CTF_TEMP_SHIFT 9 #define CG_FDO_CTRL0 0x754 #define FDO_STATIC_DUTY(x) ((x) << 0) #define FDO_STATIC_DUTY_MASK 0x0000000F #define FDO_STATIC_DUTY_SHIFT 0 #define CG_FDO_CTRL1 0x758 #define FMAX_DUTY100(x) ((x) << 0) #define FMAX_DUTY100_MASK 0x0000000F #define FMAX_DUTY100_SHIFT 0 #define CG_FDO_CTRL2 0x75C #define TMIN(x) ((x) << 0) #define TMIN_MASK 0x0000000F #define TMIN_SHIFT 0 #define FDO_PWM_MODE(x) ((x) << 11) #define FDO_PWM_MODE_MASK (3 << 11) #define FDO_PWM_MODE_SHIFT 11 #define TACH_PWM_RESP_RATE(x) ((x) << 25) #define TACH_PWM_RESP_RATE_MASK (0x7f << 25) #define TACH_PWM_RESP_RATE_SHIFT 25 #define CG_TACH_CTRL 0x770 # define EDGE_PER_REV(x) ((x) << 0) # define EDGE_PER_REV_MASK (0x7 << 0) # define EDGE_PER_REV_SHIFT 0 # define TARGET_PERIOD(x) ((x) << 3) # define TARGET_PERIOD_MASK 0xfffffff8 # define TARGET_PERIOD_SHIFT 3 #define CG_TACH_STATUS 0x774 # define TACH_PERIOD(x) ((x) << 0) # define TACH_PERIOD_MASK 0xffffffff # define TACH_PERIOD_SHIFT 0 #define GENERAL_PWRMGT 0x780 # define GLOBAL_PWRMGT_EN (1 << 0) # define STATIC_PM_EN (1 << 1) # define THERMAL_PROTECTION_DIS (1 << 2) # define THERMAL_PROTECTION_TYPE (1 << 3) # define SW_SMIO_INDEX(x) ((x) << 6) # define SW_SMIO_INDEX_MASK (1 << 6) # define SW_SMIO_INDEX_SHIFT 6 # define VOLT_PWRMGT_EN (1 << 10) # define DYN_SPREAD_SPECTRUM_EN (1 << 23) #define CG_TPC 0x784 #define SCLK_PWRMGT_CNTL 0x788 # define SCLK_PWRMGT_OFF (1 << 0) # define SCLK_LOW_D1 (1 << 1) # define FIR_RESET (1 << 4) # define FIR_FORCE_TREND_SEL (1 << 5) # define FIR_TREND_MODE (1 << 6) # define DYN_GFX_CLK_OFF_EN (1 << 7) # define GFX_CLK_FORCE_ON (1 << 8) # define GFX_CLK_REQUEST_OFF (1 << 9) # define GFX_CLK_FORCE_OFF (1 << 10) # define GFX_CLK_OFF_ACPI_D1 (1 << 11) # define GFX_CLK_OFF_ACPI_D2 (1 << 12) # define GFX_CLK_OFF_ACPI_D3 (1 << 13) # define DYN_LIGHT_SLEEP_EN (1 << 14) #define TARGET_AND_CURRENT_PROFILE_INDEX 0x798 # define CURRENT_STATE_INDEX_MASK (0xf << 4) # define CURRENT_STATE_INDEX_SHIFT 4 #define CG_FTV 0x7bc #define CG_FFCT_0 0x7c0 # define UTC_0(x) ((x) << 0) # define UTC_0_MASK (0x3ff << 0) # define DTC_0(x) ((x) << 10) # define DTC_0_MASK (0x3ff << 10) #define CG_BSP 0x7fc # define BSP(x) ((x) << 0) # define BSP_MASK (0xffff << 0) # define BSU(x) ((x) << 16) # define BSU_MASK (0xf << 16) #define CG_AT 0x800 # define CG_R(x) ((x) << 0) # define CG_R_MASK (0xffff << 0) # define CG_L(x) ((x) << 16) # define CG_L_MASK (0xffff << 16) #define CG_GIT 0x804 # define CG_GICST(x) ((x) << 0) # define CG_GICST_MASK (0xffff << 0) # define CG_GIPOT(x) ((x) << 16) # define CG_GIPOT_MASK (0xffff << 16) #define CG_SSP 0x80c # define SST(x) ((x) << 0) # define SST_MASK (0xffff << 0) # define SSTU(x) ((x) << 16) # define SSTU_MASK (0xf << 16) #define CG_DISPLAY_GAP_CNTL 0x828 # define DISP1_GAP(x) ((x) << 0) # define DISP1_GAP_MASK (3 << 0) # define DISP2_GAP(x) ((x) << 2) # define DISP2_GAP_MASK (3 << 2) # define VBI_TIMER_COUNT(x) ((x) << 4) # define VBI_TIMER_COUNT_MASK (0x3fff << 4) # define VBI_TIMER_UNIT(x) ((x) << 20) # define VBI_TIMER_UNIT_MASK (7 << 20) # define DISP1_GAP_MCHG(x) ((x) << 24) # define DISP1_GAP_MCHG_MASK (3 << 24) # define DISP2_GAP_MCHG(x) ((x) << 26) # define DISP2_GAP_MCHG_MASK (3 << 26) #define CG_ULV_CONTROL 0x878 #define CG_ULV_PARAMETER 0x87c #define SMC_SCRATCH0 0x884 #define CG_CAC_CTRL 0x8b8 # define CAC_WINDOW(x) ((x) << 0) # define CAC_WINDOW_MASK 0x00ffffff #define DMIF_ADDR_CONFIG 0xBD4 #define DMIF_ADDR_CALC 0xC00 #define PIPE0_DMIF_BUFFER_CONTROL 0x0ca0 # define DMIF_BUFFERS_ALLOCATED(x) ((x) << 0) # define DMIF_BUFFERS_ALLOCATED_COMPLETED (1 << 4) #define SRBM_STATUS 0xE50 #define GRBM_RQ_PENDING (1 << 5) #define VMC_BUSY (1 << 8) #define MCB_BUSY (1 << 9) #define MCB_NON_DISPLAY_BUSY (1 << 10) #define MCC_BUSY (1 << 11) #define MCD_BUSY (1 << 12) #define SEM_BUSY (1 << 14) #define IH_BUSY (1 << 17) #define SRBM_SOFT_RESET 0x0E60 #define SOFT_RESET_BIF (1 << 1) #define SOFT_RESET_DC (1 << 5) #define SOFT_RESET_DMA1 (1 << 6) #define SOFT_RESET_GRBM (1 << 8) #define SOFT_RESET_HDP (1 << 9) #define SOFT_RESET_IH (1 << 10) #define SOFT_RESET_MC (1 << 11) #define SOFT_RESET_ROM (1 << 14) #define SOFT_RESET_SEM (1 << 15) #define SOFT_RESET_VMC (1 << 17) #define SOFT_RESET_DMA (1 << 20) #define SOFT_RESET_TST (1 << 21) #define SOFT_RESET_REGBB (1 << 22) #define SOFT_RESET_ORB (1 << 23) #define CC_SYS_RB_BACKEND_DISABLE 0xe80 #define GC_USER_SYS_RB_BACKEND_DISABLE 0xe84 #define SRBM_STATUS2 0x0EC4 #define DMA_BUSY (1 << 5) #define DMA1_BUSY (1 << 6) #define VM_L2_CNTL 0x1400 #define ENABLE_L2_CACHE (1 << 0) #define ENABLE_L2_FRAGMENT_PROCESSING (1 << 1) #define L2_CACHE_PTE_ENDIAN_SWAP_MODE(x) ((x) << 2) #define L2_CACHE_PDE_ENDIAN_SWAP_MODE(x) ((x) << 4) #define ENABLE_L2_PTE_CACHE_LRU_UPDATE_BY_WRITE (1 << 9) #define ENABLE_L2_PDE0_CACHE_LRU_UPDATE_BY_WRITE (1 << 10) #define EFFECTIVE_L2_QUEUE_SIZE(x) (((x) & 7) << 15) #define CONTEXT1_IDENTITY_ACCESS_MODE(x) (((x) & 3) << 19) #define VM_L2_CNTL2 0x1404 #define INVALIDATE_ALL_L1_TLBS (1 << 0) #define INVALIDATE_L2_CACHE (1 << 1) #define INVALIDATE_CACHE_MODE(x) ((x) << 26) #define INVALIDATE_PTE_AND_PDE_CACHES 0 #define INVALIDATE_ONLY_PTE_CACHES 1 #define INVALIDATE_ONLY_PDE_CACHES 2 #define VM_L2_CNTL3 0x1408 #define BANK_SELECT(x) ((x) << 0) #define L2_CACHE_UPDATE_MODE(x) ((x) << 6) #define L2_CACHE_BIGK_FRAGMENT_SIZE(x) ((x) << 15) #define L2_CACHE_BIGK_ASSOCIATIVITY (1 << 20) #define VM_L2_STATUS 0x140C #define L2_BUSY (1 << 0) #define VM_CONTEXT0_CNTL 0x1410 #define ENABLE_CONTEXT (1 << 0) #define PAGE_TABLE_DEPTH(x) (((x) & 3) << 1) #define RANGE_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 3) #define RANGE_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 4) #define DUMMY_PAGE_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 6) #define DUMMY_PAGE_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 7) #define PDE0_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 9) #define PDE0_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 10) #define VALID_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 12) #define VALID_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 13) #define READ_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 15) #define READ_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 16) #define WRITE_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 18) #define WRITE_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 19) #define PAGE_TABLE_BLOCK_SIZE(x) (((x) & 0xF) << 24) #define VM_CONTEXT1_CNTL 0x1414 #define VM_CONTEXT0_CNTL2 0x1430 #define VM_CONTEXT1_CNTL2 0x1434 #define VM_CONTEXT8_PAGE_TABLE_BASE_ADDR 0x1438 #define VM_CONTEXT9_PAGE_TABLE_BASE_ADDR 0x143c #define VM_CONTEXT10_PAGE_TABLE_BASE_ADDR 0x1440 #define VM_CONTEXT11_PAGE_TABLE_BASE_ADDR 0x1444 #define VM_CONTEXT12_PAGE_TABLE_BASE_ADDR 0x1448 #define VM_CONTEXT13_PAGE_TABLE_BASE_ADDR 0x144c #define VM_CONTEXT14_PAGE_TABLE_BASE_ADDR 0x1450 #define VM_CONTEXT15_PAGE_TABLE_BASE_ADDR 0x1454 #define VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x14FC #define VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x14DC #define PROTECTIONS_MASK (0xf << 0) #define PROTECTIONS_SHIFT 0 /* bit 0: range * bit 1: pde0 * bit 2: valid * bit 3: read * bit 4: write */ #define MEMORY_CLIENT_ID_MASK (0xff << 12) #define MEMORY_CLIENT_ID_SHIFT 12 #define MEMORY_CLIENT_RW_MASK (1 << 24) #define MEMORY_CLIENT_RW_SHIFT 24 #define FAULT_VMID_MASK (0xf << 25) #define FAULT_VMID_SHIFT 25 #define VM_INVALIDATE_REQUEST 0x1478 #define VM_INVALIDATE_RESPONSE 0x147c #define VM_CONTEXT0_PROTECTION_FAULT_DEFAULT_ADDR 0x1518 #define VM_CONTEXT1_PROTECTION_FAULT_DEFAULT_ADDR 0x151c #define VM_CONTEXT0_PAGE_TABLE_BASE_ADDR 0x153c #define VM_CONTEXT1_PAGE_TABLE_BASE_ADDR 0x1540 #define VM_CONTEXT2_PAGE_TABLE_BASE_ADDR 0x1544 #define VM_CONTEXT3_PAGE_TABLE_BASE_ADDR 0x1548 #define VM_CONTEXT4_PAGE_TABLE_BASE_ADDR 0x154c #define VM_CONTEXT5_PAGE_TABLE_BASE_ADDR 0x1550 #define VM_CONTEXT6_PAGE_TABLE_BASE_ADDR 0x1554 #define VM_CONTEXT7_PAGE_TABLE_BASE_ADDR 0x1558 #define VM_CONTEXT0_PAGE_TABLE_START_ADDR 0x155c #define VM_CONTEXT1_PAGE_TABLE_START_ADDR 0x1560 #define VM_CONTEXT0_PAGE_TABLE_END_ADDR 0x157C #define VM_CONTEXT1_PAGE_TABLE_END_ADDR 0x1580 #define VM_L2_CG 0x15c0 #define MC_CG_ENABLE (1 << 18) #define MC_LS_ENABLE (1 << 19) #define MC_SHARED_CHMAP 0x2004 #define NOOFCHAN_SHIFT 12 #define NOOFCHAN_MASK 0x0000f000 #define MC_SHARED_CHREMAP 0x2008 #define MC_VM_FB_LOCATION 0x2024 #define MC_VM_AGP_TOP 0x2028 #define MC_VM_AGP_BOT 0x202C #define MC_VM_AGP_BASE 0x2030 #define MC_VM_SYSTEM_APERTURE_LOW_ADDR 0x2034 #define MC_VM_SYSTEM_APERTURE_HIGH_ADDR 0x2038 #define MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR 0x203C #define MC_VM_MX_L1_TLB_CNTL 0x2064 #define ENABLE_L1_TLB (1 << 0) #define ENABLE_L1_FRAGMENT_PROCESSING (1 << 1) #define SYSTEM_ACCESS_MODE_PA_ONLY (0 << 3) #define SYSTEM_ACCESS_MODE_USE_SYS_MAP (1 << 3) #define SYSTEM_ACCESS_MODE_IN_SYS (2 << 3) #define SYSTEM_ACCESS_MODE_NOT_IN_SYS (3 << 3) #define SYSTEM_APERTURE_UNMAPPED_ACCESS_PASS_THRU (0 << 5) #define ENABLE_ADVANCED_DRIVER_MODEL (1 << 6) #define MC_SHARED_BLACKOUT_CNTL 0x20ac #define MC_HUB_MISC_HUB_CG 0x20b8 #define MC_HUB_MISC_VM_CG 0x20bc #define MC_HUB_MISC_SIP_CG 0x20c0 #define MC_XPB_CLK_GAT 0x2478 #define MC_CITF_MISC_RD_CG 0x2648 #define MC_CITF_MISC_WR_CG 0x264c #define MC_CITF_MISC_VM_CG 0x2650 #define MC_ARB_RAMCFG 0x2760 #define NOOFBANK_SHIFT 0 #define NOOFBANK_MASK 0x00000003 #define NOOFRANK_SHIFT 2 #define NOOFRANK_MASK 0x00000004 #define NOOFROWS_SHIFT 3 #define NOOFROWS_MASK 0x00000038 #define NOOFCOLS_SHIFT 6 #define NOOFCOLS_MASK 0x000000C0 #define CHANSIZE_SHIFT 8 #define CHANSIZE_MASK 0x00000100 #define CHANSIZE_OVERRIDE (1 << 11) #define NOOFGROUPS_SHIFT 12 #define NOOFGROUPS_MASK 0x00001000 #define MC_ARB_DRAM_TIMING 0x2774 #define MC_ARB_DRAM_TIMING2 0x2778 #define MC_ARB_BURST_TIME 0x2808 #define STATE0(x) ((x) << 0) #define STATE0_MASK (0x1f << 0) #define STATE0_SHIFT 0 #define STATE1(x) ((x) << 5) #define STATE1_MASK (0x1f << 5) #define STATE1_SHIFT 5 #define STATE2(x) ((x) << 10) #define STATE2_MASK (0x1f << 10) #define STATE2_SHIFT 10 #define STATE3(x) ((x) << 15) #define STATE3_MASK (0x1f << 15) #define STATE3_SHIFT 15 #define MC_SEQ_TRAIN_WAKEUP_CNTL 0x28e8 #define TRAIN_DONE_D0 (1 << 30) #define TRAIN_DONE_D1 (1 << 31) #define MC_SEQ_SUP_CNTL 0x28c8 #define RUN_MASK (1 << 0) #define MC_SEQ_SUP_PGM 0x28cc #define MC_PMG_AUTO_CMD 0x28d0 #define MC_IO_PAD_CNTL_D0 0x29d0 #define MEM_FALL_OUT_CMD (1 << 8) #define MC_SEQ_RAS_TIMING 0x28a0 #define MC_SEQ_CAS_TIMING 0x28a4 #define MC_SEQ_MISC_TIMING 0x28a8 #define MC_SEQ_MISC_TIMING2 0x28ac #define MC_SEQ_PMG_TIMING 0x28b0 #define MC_SEQ_RD_CTL_D0 0x28b4 #define MC_SEQ_RD_CTL_D1 0x28b8 #define MC_SEQ_WR_CTL_D0 0x28bc #define MC_SEQ_WR_CTL_D1 0x28c0 #define MC_SEQ_MISC0 0x2a00 #define MC_SEQ_MISC0_VEN_ID_SHIFT 8 #define MC_SEQ_MISC0_VEN_ID_MASK 0x00000f00 #define MC_SEQ_MISC0_VEN_ID_VALUE 3 #define MC_SEQ_MISC0_REV_ID_SHIFT 12 #define MC_SEQ_MISC0_REV_ID_MASK 0x0000f000 #define MC_SEQ_MISC0_REV_ID_VALUE 1 #define MC_SEQ_MISC0_GDDR5_SHIFT 28 #define MC_SEQ_MISC0_GDDR5_MASK 0xf0000000 #define MC_SEQ_MISC0_GDDR5_VALUE 5 #define MC_SEQ_MISC1 0x2a04 #define MC_SEQ_RESERVE_M 0x2a08 #define MC_PMG_CMD_EMRS 0x2a0c #define MC_SEQ_IO_DEBUG_INDEX 0x2a44 #define MC_SEQ_IO_DEBUG_DATA 0x2a48 #define MC_SEQ_MISC5 0x2a54 #define MC_SEQ_MISC6 0x2a58 #define MC_SEQ_MISC7 0x2a64 #define MC_SEQ_RAS_TIMING_LP 0x2a6c #define MC_SEQ_CAS_TIMING_LP 0x2a70 #define MC_SEQ_MISC_TIMING_LP 0x2a74 #define MC_SEQ_MISC_TIMING2_LP 0x2a78 #define MC_SEQ_WR_CTL_D0_LP 0x2a7c #define MC_SEQ_WR_CTL_D1_LP 0x2a80 #define MC_SEQ_PMG_CMD_EMRS_LP 0x2a84 #define MC_SEQ_PMG_CMD_MRS_LP 0x2a88 #define MC_PMG_CMD_MRS 0x2aac #define MC_SEQ_RD_CTL_D0_LP 0x2b1c #define MC_SEQ_RD_CTL_D1_LP 0x2b20 #define MC_PMG_CMD_MRS1 0x2b44 #define MC_SEQ_PMG_CMD_MRS1_LP 0x2b48 #define MC_SEQ_PMG_TIMING_LP 0x2b4c #define MC_SEQ_WR_CTL_2 0x2b54 #define MC_SEQ_WR_CTL_2_LP 0x2b58 #define MC_PMG_CMD_MRS2 0x2b5c #define MC_SEQ_PMG_CMD_MRS2_LP 0x2b60 #define MCLK_PWRMGT_CNTL 0x2ba0 # define DLL_SPEED(x) ((x) << 0) # define DLL_SPEED_MASK (0x1f << 0) # define DLL_READY (1 << 6) # define MC_INT_CNTL (1 << 7) # define MRDCK0_PDNB (1 << 8) # define MRDCK1_PDNB (1 << 9) # define MRDCK0_RESET (1 << 16) # define MRDCK1_RESET (1 << 17) # define DLL_READY_READ (1 << 24) #define DLL_CNTL 0x2ba4 # define MRDCK0_BYPASS (1 << 24) # define MRDCK1_BYPASS (1 << 25) #define MPLL_CNTL_MODE 0x2bb0 # define MPLL_MCLK_SEL (1 << 11) #define MPLL_FUNC_CNTL 0x2bb4 #define BWCTRL(x) ((x) << 20) #define BWCTRL_MASK (0xff << 20) #define MPLL_FUNC_CNTL_1 0x2bb8 #define VCO_MODE(x) ((x) << 0) #define VCO_MODE_MASK (3 << 0) #define CLKFRAC(x) ((x) << 4) #define CLKFRAC_MASK (0xfff << 4) #define CLKF(x) ((x) << 16) #define CLKF_MASK (0xfff << 16) #define MPLL_FUNC_CNTL_2 0x2bbc #define MPLL_AD_FUNC_CNTL 0x2bc0 #define YCLK_POST_DIV(x) ((x) << 0) #define YCLK_POST_DIV_MASK (7 << 0) #define MPLL_DQ_FUNC_CNTL 0x2bc4 #define YCLK_SEL(x) ((x) << 4) #define YCLK_SEL_MASK (1 << 4) #define MPLL_SS1 0x2bcc #define CLKV(x) ((x) << 0) #define CLKV_MASK (0x3ffffff << 0) #define MPLL_SS2 0x2bd0 #define CLKS(x) ((x) << 0) #define CLKS_MASK (0xfff << 0) #define HDP_HOST_PATH_CNTL 0x2C00 #define CLOCK_GATING_DIS (1 << 23) #define HDP_NONSURFACE_BASE 0x2C04 #define HDP_NONSURFACE_INFO 0x2C08 #define HDP_NONSURFACE_SIZE 0x2C0C #define HDP_ADDR_CONFIG 0x2F48 #define HDP_MISC_CNTL 0x2F4C #define HDP_FLUSH_INVALIDATE_CACHE (1 << 0) #define HDP_MEM_POWER_LS 0x2F50 #define HDP_LS_ENABLE (1 << 0) #define ATC_MISC_CG 0x3350 #define IH_RB_CNTL 0x3e00 # define IH_RB_ENABLE (1 << 0) # define IH_IB_SIZE(x) ((x) << 1) /* log2 */ # define IH_RB_FULL_DRAIN_ENABLE (1 << 6) # define IH_WPTR_WRITEBACK_ENABLE (1 << 8) # define IH_WPTR_WRITEBACK_TIMER(x) ((x) << 9) /* log2 */ # define IH_WPTR_OVERFLOW_ENABLE (1 << 16) # define IH_WPTR_OVERFLOW_CLEAR (1 << 31) #define IH_RB_BASE 0x3e04 #define IH_RB_RPTR 0x3e08 #define IH_RB_WPTR 0x3e0c # define RB_OVERFLOW (1 << 0) # define WPTR_OFFSET_MASK 0x3fffc #define IH_RB_WPTR_ADDR_HI 0x3e10 #define IH_RB_WPTR_ADDR_LO 0x3e14 #define IH_CNTL 0x3e18 # define ENABLE_INTR (1 << 0) # define IH_MC_SWAP(x) ((x) << 1) # define IH_MC_SWAP_NONE 0 # define IH_MC_SWAP_16BIT 1 # define IH_MC_SWAP_32BIT 2 # define IH_MC_SWAP_64BIT 3 # define RPTR_REARM (1 << 4) # define MC_WRREQ_CREDIT(x) ((x) << 15) # define MC_WR_CLEAN_CNT(x) ((x) << 20) # define MC_VMID(x) ((x) << 25) #define CONFIG_MEMSIZE 0x5428 #define INTERRUPT_CNTL 0x5468 # define IH_DUMMY_RD_OVERRIDE (1 << 0) # define IH_DUMMY_RD_EN (1 << 1) # define IH_REQ_NONSNOOP_EN (1 << 3) # define GEN_IH_INT_EN (1 << 8) #define INTERRUPT_CNTL2 0x546c #define HDP_MEM_COHERENCY_FLUSH_CNTL 0x5480 #define BIF_FB_EN 0x5490 #define FB_READ_EN (1 << 0) #define FB_WRITE_EN (1 << 1) #define HDP_REG_COHERENCY_FLUSH_CNTL 0x54A0 /* DCE6 ELD audio interface */ #define AZ_F0_CODEC_ENDPOINT_INDEX 0x5E00 # define AZ_ENDPOINT_REG_INDEX(x) (((x) & 0xff) << 0) # define AZ_ENDPOINT_REG_WRITE_EN (1 << 8) #define AZ_F0_CODEC_ENDPOINT_DATA 0x5E04 #define AZ_F0_CODEC_PIN_CONTROL_CHANNEL_SPEAKER 0x25 #define SPEAKER_ALLOCATION(x) (((x) & 0x7f) << 0) #define SPEAKER_ALLOCATION_MASK (0x7f << 0) #define SPEAKER_ALLOCATION_SHIFT 0 #define HDMI_CONNECTION (1 << 16) #define DP_CONNECTION (1 << 17) #define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR0 0x28 /* LPCM */ #define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR1 0x29 /* AC3 */ #define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR2 0x2A /* MPEG1 */ #define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR3 0x2B /* MP3 */ #define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR4 0x2C /* MPEG2 */ #define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR5 0x2D /* AAC */ #define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR6 0x2E /* DTS */ #define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR7 0x2F /* ATRAC */ #define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR8 0x30 /* one bit audio - leave at 0 (default) */ #define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR9 0x31 /* Dolby Digital */ #define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR10 0x32 /* DTS-HD */ #define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR11 0x33 /* MAT-MLP */ #define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR12 0x34 /* DTS */ #define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR13 0x35 /* WMA Pro */ # define MAX_CHANNELS(x) (((x) & 0x7) << 0) /* max channels minus one. 7 = 8 channels */ # define SUPPORTED_FREQUENCIES(x) (((x) & 0xff) << 8) # define DESCRIPTOR_BYTE_2(x) (((x) & 0xff) << 16) # define SUPPORTED_FREQUENCIES_STEREO(x) (((x) & 0xff) << 24) /* LPCM only */ /* SUPPORTED_FREQUENCIES, SUPPORTED_FREQUENCIES_STEREO * bit0 = 32 kHz * bit1 = 44.1 kHz * bit2 = 48 kHz * bit3 = 88.2 kHz * bit4 = 96 kHz * bit5 = 176.4 kHz * bit6 = 192 kHz */ #define AZ_F0_CODEC_PIN_CONTROL_RESPONSE_LIPSYNC 0x37 # define VIDEO_LIPSYNC(x) (((x) & 0xff) << 0) # define AUDIO_LIPSYNC(x) (((x) & 0xff) << 8) /* VIDEO_LIPSYNC, AUDIO_LIPSYNC * 0 = invalid * x = legal delay value * 255 = sync not supported */ #define AZ_F0_CODEC_PIN_CONTROL_RESPONSE_HBR 0x38 # define HBR_CAPABLE (1 << 0) /* enabled by default */ #define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO0 0x3a # define MANUFACTURER_ID(x) (((x) & 0xffff) << 0) # define PRODUCT_ID(x) (((x) & 0xffff) << 16) #define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO1 0x3b # define SINK_DESCRIPTION_LEN(x) (((x) & 0xff) << 0) #define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO2 0x3c # define PORT_ID0(x) (((x) & 0xffffffff) << 0) #define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO3 0x3d # define PORT_ID1(x) (((x) & 0xffffffff) << 0) #define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO4 0x3e # define DESCRIPTION0(x) (((x) & 0xff) << 0) # define DESCRIPTION1(x) (((x) & 0xff) << 8) # define DESCRIPTION2(x) (((x) & 0xff) << 16) # define DESCRIPTION3(x) (((x) & 0xff) << 24) #define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO5 0x3f # define DESCRIPTION4(x) (((x) & 0xff) << 0) # define DESCRIPTION5(x) (((x) & 0xff) << 8) # define DESCRIPTION6(x) (((x) & 0xff) << 16) # define DESCRIPTION7(x) (((x) & 0xff) << 24) #define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO6 0x40 # define DESCRIPTION8(x) (((x) & 0xff) << 0) # define DESCRIPTION9(x) (((x) & 0xff) << 8) # define DESCRIPTION10(x) (((x) & 0xff) << 16) # define DESCRIPTION11(x) (((x) & 0xff) << 24) #define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO7 0x41 # define DESCRIPTION12(x) (((x) & 0xff) << 0) # define DESCRIPTION13(x) (((x) & 0xff) << 8) # define DESCRIPTION14(x) (((x) & 0xff) << 16) # define DESCRIPTION15(x) (((x) & 0xff) << 24) #define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO8 0x42 # define DESCRIPTION16(x) (((x) & 0xff) << 0) # define DESCRIPTION17(x) (((x) & 0xff) << 8) #define AZ_F0_CODEC_PIN_CONTROL_HOT_PLUG_CONTROL 0x54 # define AUDIO_ENABLED (1 << 31) #define AZ_F0_CODEC_PIN_CONTROL_RESPONSE_CONFIGURATION_DEFAULT 0x56 #define PORT_CONNECTIVITY_MASK (3 << 30) #define PORT_CONNECTIVITY_SHIFT 30 #define DC_LB_MEMORY_SPLIT 0x6b0c #define DC_LB_MEMORY_CONFIG(x) ((x) << 20) #define PRIORITY_A_CNT 0x6b18 #define PRIORITY_MARK_MASK 0x7fff #define PRIORITY_OFF (1 << 16) #define PRIORITY_ALWAYS_ON (1 << 20) #define PRIORITY_B_CNT 0x6b1c #define DPG_PIPE_ARBITRATION_CONTROL3 0x6cc8 # define LATENCY_WATERMARK_MASK(x) ((x) << 16) #define DPG_PIPE_LATENCY_CONTROL 0x6ccc # define LATENCY_LOW_WATERMARK(x) ((x) << 0) # define LATENCY_HIGH_WATERMARK(x) ((x) << 16) /* 0x6bb8, 0x77b8, 0x103b8, 0x10fb8, 0x11bb8, 0x127b8 */ #define VLINE_STATUS 0x6bb8 # define VLINE_OCCURRED (1 << 0) # define VLINE_ACK (1 << 4) # define VLINE_STAT (1 << 12) # define VLINE_INTERRUPT (1 << 16) # define VLINE_INTERRUPT_TYPE (1 << 17) /* 0x6bbc, 0x77bc, 0x103bc, 0x10fbc, 0x11bbc, 0x127bc */ #define VBLANK_STATUS 0x6bbc # define VBLANK_OCCURRED (1 << 0) # define VBLANK_ACK (1 << 4) # define VBLANK_STAT (1 << 12) # define VBLANK_INTERRUPT (1 << 16) # define VBLANK_INTERRUPT_TYPE (1 << 17) /* 0x6b40, 0x7740, 0x10340, 0x10f40, 0x11b40, 0x12740 */ #define INT_MASK 0x6b40 # define VBLANK_INT_MASK (1 << 0) # define VLINE_INT_MASK (1 << 4) #define DISP_INTERRUPT_STATUS 0x60f4 # define LB_D1_VLINE_INTERRUPT (1 << 2) # define LB_D1_VBLANK_INTERRUPT (1 << 3) # define DC_HPD1_INTERRUPT (1 << 17) # define DC_HPD1_RX_INTERRUPT (1 << 18) # define DACA_AUTODETECT_INTERRUPT (1 << 22) # define DACB_AUTODETECT_INTERRUPT (1 << 23) # define DC_I2C_SW_DONE_INTERRUPT (1 << 24) # define DC_I2C_HW_DONE_INTERRUPT (1 << 25) #define DISP_INTERRUPT_STATUS_CONTINUE 0x60f8 # define LB_D2_VLINE_INTERRUPT (1 << 2) # define LB_D2_VBLANK_INTERRUPT (1 << 3) # define DC_HPD2_INTERRUPT (1 << 17) # define DC_HPD2_RX_INTERRUPT (1 << 18) # define DISP_TIMER_INTERRUPT (1 << 24) #define DISP_INTERRUPT_STATUS_CONTINUE2 0x60fc # define LB_D3_VLINE_INTERRUPT (1 << 2) # define LB_D3_VBLANK_INTERRUPT (1 << 3) # define DC_HPD3_INTERRUPT (1 << 17) # define DC_HPD3_RX_INTERRUPT (1 << 18) #define DISP_INTERRUPT_STATUS_CONTINUE3 0x6100 # define LB_D4_VLINE_INTERRUPT (1 << 2) # define LB_D4_VBLANK_INTERRUPT (1 << 3) # define DC_HPD4_INTERRUPT (1 << 17) # define DC_HPD4_RX_INTERRUPT (1 << 18) #define DISP_INTERRUPT_STATUS_CONTINUE4 0x614c # define LB_D5_VLINE_INTERRUPT (1 << 2) # define LB_D5_VBLANK_INTERRUPT (1 << 3) # define DC_HPD5_INTERRUPT (1 << 17) # define DC_HPD5_RX_INTERRUPT (1 << 18) #define DISP_INTERRUPT_STATUS_CONTINUE5 0x6150 # define LB_D6_VLINE_INTERRUPT (1 << 2) # define LB_D6_VBLANK_INTERRUPT (1 << 3) # define DC_HPD6_INTERRUPT (1 << 17) # define DC_HPD6_RX_INTERRUPT (1 << 18) /* 0x6858, 0x7458, 0x10058, 0x10c58, 0x11858, 0x12458 */ #define GRPH_INT_STATUS 0x6858 # define GRPH_PFLIP_INT_OCCURRED (1 << 0) # define GRPH_PFLIP_INT_CLEAR (1 << 8) /* 0x685c, 0x745c, 0x1005c, 0x10c5c, 0x1185c, 0x1245c */ #define GRPH_INT_CONTROL 0x685c # define GRPH_PFLIP_INT_MASK (1 << 0) # define GRPH_PFLIP_INT_TYPE (1 << 8) #define DAC_AUTODETECT_INT_CONTROL 0x67c8 #define DC_HPD1_INT_STATUS 0x601c #define DC_HPD2_INT_STATUS 0x6028 #define DC_HPD3_INT_STATUS 0x6034 #define DC_HPD4_INT_STATUS 0x6040 #define DC_HPD5_INT_STATUS 0x604c #define DC_HPD6_INT_STATUS 0x6058 # define DC_HPDx_INT_STATUS (1 << 0) # define DC_HPDx_SENSE (1 << 1) # define DC_HPDx_RX_INT_STATUS (1 << 8) #define DC_HPD1_INT_CONTROL 0x6020 #define DC_HPD2_INT_CONTROL 0x602c #define DC_HPD3_INT_CONTROL 0x6038 #define DC_HPD4_INT_CONTROL 0x6044 #define DC_HPD5_INT_CONTROL 0x6050 #define DC_HPD6_INT_CONTROL 0x605c # define DC_HPDx_INT_ACK (1 << 0) # define DC_HPDx_INT_POLARITY (1 << 8) # define DC_HPDx_INT_EN (1 << 16) # define DC_HPDx_RX_INT_ACK (1 << 20) # define DC_HPDx_RX_INT_EN (1 << 24) #define DC_HPD1_CONTROL 0x6024 #define DC_HPD2_CONTROL 0x6030 #define DC_HPD3_CONTROL 0x603c #define DC_HPD4_CONTROL 0x6048 #define DC_HPD5_CONTROL 0x6054 #define DC_HPD6_CONTROL 0x6060 # define DC_HPDx_CONNECTION_TIMER(x) ((x) << 0) # define DC_HPDx_RX_INT_TIMER(x) ((x) << 16) # define DC_HPDx_EN (1 << 28) #define DPG_PIPE_STUTTER_CONTROL 0x6cd4 # define STUTTER_ENABLE (1 << 0) /* 0x6e98, 0x7a98, 0x10698, 0x11298, 0x11e98, 0x12a98 */ #define CRTC_STATUS_FRAME_COUNT 0x6e98 #define AFMT_AUDIO_SRC_CONTROL 0x713c #define AFMT_AUDIO_SRC_SELECT(x) (((x) & 7) << 0) /* AFMT_AUDIO_SRC_SELECT * 0 = stream0 * 1 = stream1 * 2 = stream2 * 3 = stream3 * 4 = stream4 * 5 = stream5 */ #define GRBM_CNTL 0x8000 #define GRBM_READ_TIMEOUT(x) ((x) << 0) #define GRBM_STATUS2 0x8008 #define RLC_RQ_PENDING (1 << 0) #define RLC_BUSY (1 << 8) #define TC_BUSY (1 << 9) #define GRBM_STATUS 0x8010 #define CMDFIFO_AVAIL_MASK 0x0000000F #define RING2_RQ_PENDING (1 << 4) #define SRBM_RQ_PENDING (1 << 5) #define RING1_RQ_PENDING (1 << 6) #define CF_RQ_PENDING (1 << 7) #define PF_RQ_PENDING (1 << 8) #define GDS_DMA_RQ_PENDING (1 << 9) #define GRBM_EE_BUSY (1 << 10) #define DB_CLEAN (1 << 12) #define CB_CLEAN (1 << 13) #define TA_BUSY (1 << 14) #define GDS_BUSY (1 << 15) #define VGT_BUSY (1 << 17) #define IA_BUSY_NO_DMA (1 << 18) #define IA_BUSY (1 << 19) #define SX_BUSY (1 << 20) #define SPI_BUSY (1 << 22) #define BCI_BUSY (1 << 23) #define SC_BUSY (1 << 24) #define PA_BUSY (1 << 25) #define DB_BUSY (1 << 26) #define CP_COHERENCY_BUSY (1 << 28) #define CP_BUSY (1 << 29) #define CB_BUSY (1 << 30) #define GUI_ACTIVE (1 << 31) #define GRBM_STATUS_SE0 0x8014 #define GRBM_STATUS_SE1 0x8018 #define SE_DB_CLEAN (1 << 1) #define SE_CB_CLEAN (1 << 2) #define SE_BCI_BUSY (1 << 22) #define SE_VGT_BUSY (1 << 23) #define SE_PA_BUSY (1 << 24) #define SE_TA_BUSY (1 << 25) #define SE_SX_BUSY (1 << 26) #define SE_SPI_BUSY (1 << 27) #define SE_SC_BUSY (1 << 29) #define SE_DB_BUSY (1 << 30) #define SE_CB_BUSY (1 << 31) #define GRBM_SOFT_RESET 0x8020 #define SOFT_RESET_CP (1 << 0) #define SOFT_RESET_CB (1 << 1) #define SOFT_RESET_RLC (1 << 2) #define SOFT_RESET_DB (1 << 3) #define SOFT_RESET_GDS (1 << 4) #define SOFT_RESET_PA (1 << 5) #define SOFT_RESET_SC (1 << 6) #define SOFT_RESET_BCI (1 << 7) #define SOFT_RESET_SPI (1 << 8) #define SOFT_RESET_SX (1 << 10) #define SOFT_RESET_TC (1 << 11) #define SOFT_RESET_TA (1 << 12) #define SOFT_RESET_VGT (1 << 14) #define SOFT_RESET_IA (1 << 15) #define GRBM_GFX_INDEX 0x802C #define INSTANCE_INDEX(x) ((x) << 0) #define SH_INDEX(x) ((x) << 8) #define SE_INDEX(x) ((x) << 16) #define SH_BROADCAST_WRITES (1 << 29) #define INSTANCE_BROADCAST_WRITES (1 << 30) #define SE_BROADCAST_WRITES (1 << 31) #define GRBM_INT_CNTL 0x8060 # define RDERR_INT_ENABLE (1 << 0) # define GUI_IDLE_INT_ENABLE (1 << 19) #define CP_STRMOUT_CNTL 0x84FC #define SCRATCH_REG0 0x8500 #define SCRATCH_REG1 0x8504 #define SCRATCH_REG2 0x8508 #define SCRATCH_REG3 0x850C #define SCRATCH_REG4 0x8510 #define SCRATCH_REG5 0x8514 #define SCRATCH_REG6 0x8518 #define SCRATCH_REG7 0x851C #define SCRATCH_UMSK 0x8540 #define SCRATCH_ADDR 0x8544 #define CP_SEM_WAIT_TIMER 0x85BC #define CP_SEM_INCOMPLETE_TIMER_CNTL 0x85C8 #define CP_ME_CNTL 0x86D8 #define CP_CE_HALT (1 << 24) #define CP_PFP_HALT (1 << 26) #define CP_ME_HALT (1 << 28) #define CP_COHER_CNTL2 0x85E8 #define CP_RB2_RPTR 0x86f8 #define CP_RB1_RPTR 0x86fc #define CP_RB0_RPTR 0x8700 #define CP_RB_WPTR_DELAY 0x8704 #define CP_QUEUE_THRESHOLDS 0x8760 #define ROQ_IB1_START(x) ((x) << 0) #define ROQ_IB2_START(x) ((x) << 8) #define CP_MEQ_THRESHOLDS 0x8764 #define MEQ1_START(x) ((x) << 0) #define MEQ2_START(x) ((x) << 8) #define CP_PERFMON_CNTL 0x87FC #define VGT_VTX_VECT_EJECT_REG 0x88B0 #define VGT_CACHE_INVALIDATION 0x88C4 #define CACHE_INVALIDATION(x) ((x) << 0) #define VC_ONLY 0 #define TC_ONLY 1 #define VC_AND_TC 2 #define AUTO_INVLD_EN(x) ((x) << 6) #define NO_AUTO 0 #define ES_AUTO 1 #define GS_AUTO 2 #define ES_AND_GS_AUTO 3 #define VGT_ESGS_RING_SIZE 0x88C8 #define VGT_GSVS_RING_SIZE 0x88CC #define VGT_GS_VERTEX_REUSE 0x88D4 #define VGT_PRIMITIVE_TYPE 0x8958 #define VGT_INDEX_TYPE 0x895C #define VGT_NUM_INDICES 0x8970 #define VGT_NUM_INSTANCES 0x8974 #define VGT_TF_RING_SIZE 0x8988 #define VGT_HS_OFFCHIP_PARAM 0x89B0 #define VGT_TF_MEMORY_BASE 0x89B8 #define CC_GC_SHADER_ARRAY_CONFIG 0x89bc #define INACTIVE_CUS_MASK 0xFFFF0000 #define INACTIVE_CUS_SHIFT 16 #define GC_USER_SHADER_ARRAY_CONFIG 0x89c0 #define PA_CL_ENHANCE 0x8A14 #define CLIP_VTX_REORDER_ENA (1 << 0) #define NUM_CLIP_SEQ(x) ((x) << 1) #define PA_SU_LINE_STIPPLE_VALUE 0x8A60 #define PA_SC_LINE_STIPPLE_STATE 0x8B10 #define PA_SC_FORCE_EOV_MAX_CNTS 0x8B24 #define FORCE_EOV_MAX_CLK_CNT(x) ((x) << 0) #define FORCE_EOV_MAX_REZ_CNT(x) ((x) << 16) #define PA_SC_FIFO_SIZE 0x8BCC #define SC_FRONTEND_PRIM_FIFO_SIZE(x) ((x) << 0) #define SC_BACKEND_PRIM_FIFO_SIZE(x) ((x) << 6) #define SC_HIZ_TILE_FIFO_SIZE(x) ((x) << 15) #define SC_EARLYZ_TILE_FIFO_SIZE(x) ((x) << 23) #define PA_SC_ENHANCE 0x8BF0 #define SQ_CONFIG 0x8C00 #define SQC_CACHES 0x8C08 #define SQ_POWER_THROTTLE 0x8e58 #define MIN_POWER(x) ((x) << 0) #define MIN_POWER_MASK (0x3fff << 0) #define MIN_POWER_SHIFT 0 #define MAX_POWER(x) ((x) << 16) #define MAX_POWER_MASK (0x3fff << 16) #define MAX_POWER_SHIFT 0 #define SQ_POWER_THROTTLE2 0x8e5c #define MAX_POWER_DELTA(x) ((x) << 0) #define MAX_POWER_DELTA_MASK (0x3fff << 0) #define MAX_POWER_DELTA_SHIFT 0 #define STI_SIZE(x) ((x) << 16) #define STI_SIZE_MASK (0x3ff << 16) #define STI_SIZE_SHIFT 16 #define LTI_RATIO(x) ((x) << 27) #define LTI_RATIO_MASK (0xf << 27) #define LTI_RATIO_SHIFT 27 #define SX_DEBUG_1 0x9060 #define SPI_STATIC_THREAD_MGMT_1 0x90E0 #define SPI_STATIC_THREAD_MGMT_2 0x90E4 #define SPI_STATIC_THREAD_MGMT_3 0x90E8 #define SPI_PS_MAX_WAVE_ID 0x90EC #define SPI_CONFIG_CNTL 0x9100 #define SPI_CONFIG_CNTL_1 0x913C #define VTX_DONE_DELAY(x) ((x) << 0) #define INTERP_ONE_PRIM_PER_ROW (1 << 4) #define CGTS_TCC_DISABLE 0x9148 #define CGTS_USER_TCC_DISABLE 0x914C #define TCC_DISABLE_MASK 0xFFFF0000 #define TCC_DISABLE_SHIFT 16 #define CGTS_SM_CTRL_REG 0x9150 #define OVERRIDE (1 << 21) #define LS_OVERRIDE (1 << 22) #define SPI_LB_CU_MASK 0x9354 #define TA_CNTL_AUX 0x9508 #define CC_RB_BACKEND_DISABLE 0x98F4 #define BACKEND_DISABLE(x) ((x) << 16) #define GB_ADDR_CONFIG 0x98F8 #define NUM_PIPES(x) ((x) << 0) #define NUM_PIPES_MASK 0x00000007 #define NUM_PIPES_SHIFT 0 #define PIPE_INTERLEAVE_SIZE(x) ((x) << 4) #define PIPE_INTERLEAVE_SIZE_MASK 0x00000070 #define PIPE_INTERLEAVE_SIZE_SHIFT 4 #define NUM_SHADER_ENGINES(x) ((x) << 12) #define NUM_SHADER_ENGINES_MASK 0x00003000 #define NUM_SHADER_ENGINES_SHIFT 12 #define SHADER_ENGINE_TILE_SIZE(x) ((x) << 16) #define SHADER_ENGINE_TILE_SIZE_MASK 0x00070000 #define SHADER_ENGINE_TILE_SIZE_SHIFT 16 #define NUM_GPUS(x) ((x) << 20) #define NUM_GPUS_MASK 0x00700000 #define NUM_GPUS_SHIFT 20 #define MULTI_GPU_TILE_SIZE(x) ((x) << 24) #define MULTI_GPU_TILE_SIZE_MASK 0x03000000 #define MULTI_GPU_TILE_SIZE_SHIFT 24 #define ROW_SIZE(x) ((x) << 28) #define ROW_SIZE_MASK 0x30000000 #define ROW_SIZE_SHIFT 28 #define GB_TILE_MODE0 0x9910 # define MICRO_TILE_MODE(x) ((x) << 0) # define ADDR_SURF_DISPLAY_MICRO_TILING 0 # define ADDR_SURF_THIN_MICRO_TILING 1 # define ADDR_SURF_DEPTH_MICRO_TILING 2 # define ARRAY_MODE(x) ((x) << 2) # define ARRAY_LINEAR_GENERAL 0 # define ARRAY_LINEAR_ALIGNED 1 # define ARRAY_1D_TILED_THIN1 2 # define ARRAY_2D_TILED_THIN1 4 # define PIPE_CONFIG(x) ((x) << 6) # define ADDR_SURF_P2 0 # define ADDR_SURF_P4_8x16 4 # define ADDR_SURF_P4_16x16 5 # define ADDR_SURF_P4_16x32 6 # define ADDR_SURF_P4_32x32 7 # define ADDR_SURF_P8_16x16_8x16 8 # define ADDR_SURF_P8_16x32_8x16 9 # define ADDR_SURF_P8_32x32_8x16 10 # define ADDR_SURF_P8_16x32_16x16 11 # define ADDR_SURF_P8_32x32_16x16 12 # define ADDR_SURF_P8_32x32_16x32 13 # define ADDR_SURF_P8_32x64_32x32 14 # define TILE_SPLIT(x) ((x) << 11) # define ADDR_SURF_TILE_SPLIT_64B 0 # define ADDR_SURF_TILE_SPLIT_128B 1 # define ADDR_SURF_TILE_SPLIT_256B 2 # define ADDR_SURF_TILE_SPLIT_512B 3 # define ADDR_SURF_TILE_SPLIT_1KB 4 # define ADDR_SURF_TILE_SPLIT_2KB 5 # define ADDR_SURF_TILE_SPLIT_4KB 6 # define BANK_WIDTH(x) ((x) << 14) # define ADDR_SURF_BANK_WIDTH_1 0 # define ADDR_SURF_BANK_WIDTH_2 1 # define ADDR_SURF_BANK_WIDTH_4 2 # define ADDR_SURF_BANK_WIDTH_8 3 # define BANK_HEIGHT(x) ((x) << 16) # define ADDR_SURF_BANK_HEIGHT_1 0 # define ADDR_SURF_BANK_HEIGHT_2 1 # define ADDR_SURF_BANK_HEIGHT_4 2 # define ADDR_SURF_BANK_HEIGHT_8 3 # define MACRO_TILE_ASPECT(x) ((x) << 18) # define ADDR_SURF_MACRO_ASPECT_1 0 # define ADDR_SURF_MACRO_ASPECT_2 1 # define ADDR_SURF_MACRO_ASPECT_4 2 # define ADDR_SURF_MACRO_ASPECT_8 3 # define NUM_BANKS(x) ((x) << 20) # define ADDR_SURF_2_BANK 0 # define ADDR_SURF_4_BANK 1 # define ADDR_SURF_8_BANK 2 # define ADDR_SURF_16_BANK 3 #define CB_PERFCOUNTER0_SELECT0 0x9a20 #define CB_PERFCOUNTER0_SELECT1 0x9a24 #define CB_PERFCOUNTER1_SELECT0 0x9a28 #define CB_PERFCOUNTER1_SELECT1 0x9a2c #define CB_PERFCOUNTER2_SELECT0 0x9a30 #define CB_PERFCOUNTER2_SELECT1 0x9a34 #define CB_PERFCOUNTER3_SELECT0 0x9a38 #define CB_PERFCOUNTER3_SELECT1 0x9a3c #define CB_CGTT_SCLK_CTRL 0x9a60 #define GC_USER_RB_BACKEND_DISABLE 0x9B7C #define BACKEND_DISABLE_MASK 0x00FF0000 #define BACKEND_DISABLE_SHIFT 16 #define TCP_CHAN_STEER_LO 0xac0c #define TCP_CHAN_STEER_HI 0xac10 #define CP_RB0_BASE 0xC100 #define CP_RB0_CNTL 0xC104 #define RB_BUFSZ(x) ((x) << 0) #define RB_BLKSZ(x) ((x) << 8) #define BUF_SWAP_32BIT (2 << 16) #define RB_NO_UPDATE (1 << 27) #define RB_RPTR_WR_ENA (1 << 31) #define CP_RB0_RPTR_ADDR 0xC10C #define CP_RB0_RPTR_ADDR_HI 0xC110 #define CP_RB0_WPTR 0xC114 #define CP_PFP_UCODE_ADDR 0xC150 #define CP_PFP_UCODE_DATA 0xC154 #define CP_ME_RAM_RADDR 0xC158 #define CP_ME_RAM_WADDR 0xC15C #define CP_ME_RAM_DATA 0xC160 #define CP_CE_UCODE_ADDR 0xC168 #define CP_CE_UCODE_DATA 0xC16C #define CP_RB1_BASE 0xC180 #define CP_RB1_CNTL 0xC184 #define CP_RB1_RPTR_ADDR 0xC188 #define CP_RB1_RPTR_ADDR_HI 0xC18C #define CP_RB1_WPTR 0xC190 #define CP_RB2_BASE 0xC194 #define CP_RB2_CNTL 0xC198 #define CP_RB2_RPTR_ADDR 0xC19C #define CP_RB2_RPTR_ADDR_HI 0xC1A0 #define CP_RB2_WPTR 0xC1A4 #define CP_INT_CNTL_RING0 0xC1A8 #define CP_INT_CNTL_RING1 0xC1AC #define CP_INT_CNTL_RING2 0xC1B0 # define CNTX_BUSY_INT_ENABLE (1 << 19) # define CNTX_EMPTY_INT_ENABLE (1 << 20) # define WAIT_MEM_SEM_INT_ENABLE (1 << 21) # define TIME_STAMP_INT_ENABLE (1 << 26) # define CP_RINGID2_INT_ENABLE (1 << 29) # define CP_RINGID1_INT_ENABLE (1 << 30) # define CP_RINGID0_INT_ENABLE (1 << 31) #define CP_INT_STATUS_RING0 0xC1B4 #define CP_INT_STATUS_RING1 0xC1B8 #define CP_INT_STATUS_RING2 0xC1BC # define WAIT_MEM_SEM_INT_STAT (1 << 21) # define TIME_STAMP_INT_STAT (1 << 26) # define CP_RINGID2_INT_STAT (1 << 29) # define CP_RINGID1_INT_STAT (1 << 30) # define CP_RINGID0_INT_STAT (1 << 31) #define CP_MEM_SLP_CNTL 0xC1E4 # define CP_MEM_LS_EN (1 << 0) #define CP_DEBUG 0xC1FC #define RLC_CNTL 0xC300 # define RLC_ENABLE (1 << 0) #define RLC_RL_BASE 0xC304 #define RLC_RL_SIZE 0xC308 #define RLC_LB_CNTL 0xC30C # define LOAD_BALANCE_ENABLE (1 << 0) #define RLC_SAVE_AND_RESTORE_BASE 0xC310 #define RLC_LB_CNTR_MAX 0xC314 #define RLC_LB_CNTR_INIT 0xC318 #define RLC_CLEAR_STATE_RESTORE_BASE 0xC320 #define RLC_UCODE_ADDR 0xC32C #define RLC_UCODE_DATA 0xC330 #define RLC_GPU_CLOCK_COUNT_LSB 0xC338 #define RLC_GPU_CLOCK_COUNT_MSB 0xC33C #define RLC_CAPTURE_GPU_CLOCK_COUNT 0xC340 #define RLC_MC_CNTL 0xC344 #define RLC_UCODE_CNTL 0xC348 #define RLC_STAT 0xC34C # define RLC_BUSY_STATUS (1 << 0) # define GFX_POWER_STATUS (1 << 1) # define GFX_CLOCK_STATUS (1 << 2) # define GFX_LS_STATUS (1 << 3) #define RLC_PG_CNTL 0xC35C # define GFX_PG_ENABLE (1 << 0) # define GFX_PG_SRC (1 << 1) #define RLC_CGTT_MGCG_OVERRIDE 0xC400 #define RLC_CGCG_CGLS_CTRL 0xC404 # define CGCG_EN (1 << 0) # define CGLS_EN (1 << 1) #define RLC_TTOP_D 0xC414 # define RLC_PUD(x) ((x) << 0) # define RLC_PUD_MASK (0xff << 0) # define RLC_PDD(x) ((x) << 8) # define RLC_PDD_MASK (0xff << 8) # define RLC_TTPD(x) ((x) << 16) # define RLC_TTPD_MASK (0xff << 16) # define RLC_MSD(x) ((x) << 24) # define RLC_MSD_MASK (0xff << 24) #define RLC_LB_INIT_CU_MASK 0xC41C #define RLC_PG_AO_CU_MASK 0xC42C #define RLC_MAX_PG_CU 0xC430 # define MAX_PU_CU(x) ((x) << 0) # define MAX_PU_CU_MASK (0xff << 0) #define RLC_AUTO_PG_CTRL 0xC434 # define AUTO_PG_EN (1 << 0) # define GRBM_REG_SGIT(x) ((x) << 3) # define GRBM_REG_SGIT_MASK (0xffff << 3) # define PG_AFTER_GRBM_REG_ST(x) ((x) << 19) # define PG_AFTER_GRBM_REG_ST_MASK (0x1fff << 19) #define RLC_SERDES_WR_MASTER_MASK_0 0xC454 #define RLC_SERDES_WR_MASTER_MASK_1 0xC458 #define RLC_SERDES_WR_CTRL 0xC45C #define RLC_SERDES_MASTER_BUSY_0 0xC464 #define RLC_SERDES_MASTER_BUSY_1 0xC468 #define RLC_GCPM_GENERAL_3 0xC478 #define DB_RENDER_CONTROL 0x28000 #define DB_DEPTH_INFO 0x2803c #define PA_SC_RASTER_CONFIG 0x28350 # define RASTER_CONFIG_RB_MAP_0 0 # define RASTER_CONFIG_RB_MAP_1 1 # define RASTER_CONFIG_RB_MAP_2 2 # define RASTER_CONFIG_RB_MAP_3 3 #define VGT_EVENT_INITIATOR 0x28a90 # define SAMPLE_STREAMOUTSTATS1 (1 << 0) # define SAMPLE_STREAMOUTSTATS2 (2 << 0) # define SAMPLE_STREAMOUTSTATS3 (3 << 0) # define CACHE_FLUSH_TS (4 << 0) # define CACHE_FLUSH (6 << 0) # define CS_PARTIAL_FLUSH (7 << 0) # define VGT_STREAMOUT_RESET (10 << 0) # define END_OF_PIPE_INCR_DE (11 << 0) # define END_OF_PIPE_IB_END (12 << 0) # define RST_PIX_CNT (13 << 0) # define VS_PARTIAL_FLUSH (15 << 0) # define PS_PARTIAL_FLUSH (16 << 0) # define CACHE_FLUSH_AND_INV_TS_EVENT (20 << 0) # define ZPASS_DONE (21 << 0) # define CACHE_FLUSH_AND_INV_EVENT (22 << 0) # define PERFCOUNTER_START (23 << 0) # define PERFCOUNTER_STOP (24 << 0) # define PIPELINESTAT_START (25 << 0) # define PIPELINESTAT_STOP (26 << 0) # define PERFCOUNTER_SAMPLE (27 << 0) # define SAMPLE_PIPELINESTAT (30 << 0) # define SAMPLE_STREAMOUTSTATS (32 << 0) # define RESET_VTX_CNT (33 << 0) # define VGT_FLUSH (36 << 0) # define BOTTOM_OF_PIPE_TS (40 << 0) # define DB_CACHE_FLUSH_AND_INV (42 << 0) # define FLUSH_AND_INV_DB_DATA_TS (43 << 0) # define FLUSH_AND_INV_DB_META (44 << 0) # define FLUSH_AND_INV_CB_DATA_TS (45 << 0) # define FLUSH_AND_INV_CB_META (46 << 0) # define CS_DONE (47 << 0) # define PS_DONE (48 << 0) # define FLUSH_AND_INV_CB_PIXEL_DATA (49 << 0) # define THREAD_TRACE_START (51 << 0) # define THREAD_TRACE_STOP (52 << 0) # define THREAD_TRACE_FLUSH (54 << 0) # define THREAD_TRACE_FINISH (55 << 0) /* PIF PHY0 registers idx/data 0x8/0xc */ #define PB0_PIF_CNTL 0x10 # define LS2_EXIT_TIME(x) ((x) << 17) # define LS2_EXIT_TIME_MASK (0x7 << 17) # define LS2_EXIT_TIME_SHIFT 17 #define PB0_PIF_PAIRING 0x11 # define MULTI_PIF (1 << 25) #define PB0_PIF_PWRDOWN_0 0x12 # define PLL_POWER_STATE_IN_TXS2_0(x) ((x) << 7) # define PLL_POWER_STATE_IN_TXS2_0_MASK (0x7 << 7) # define PLL_POWER_STATE_IN_TXS2_0_SHIFT 7 # define PLL_POWER_STATE_IN_OFF_0(x) ((x) << 10) # define PLL_POWER_STATE_IN_OFF_0_MASK (0x7 << 10) # define PLL_POWER_STATE_IN_OFF_0_SHIFT 10 # define PLL_RAMP_UP_TIME_0(x) ((x) << 24) # define PLL_RAMP_UP_TIME_0_MASK (0x7 << 24) # define PLL_RAMP_UP_TIME_0_SHIFT 24 #define PB0_PIF_PWRDOWN_1 0x13 # define PLL_POWER_STATE_IN_TXS2_1(x) ((x) << 7) # define PLL_POWER_STATE_IN_TXS2_1_MASK (0x7 << 7) # define PLL_POWER_STATE_IN_TXS2_1_SHIFT 7 # define PLL_POWER_STATE_IN_OFF_1(x) ((x) << 10) # define PLL_POWER_STATE_IN_OFF_1_MASK (0x7 << 10) # define PLL_POWER_STATE_IN_OFF_1_SHIFT 10 # define PLL_RAMP_UP_TIME_1(x) ((x) << 24) # define PLL_RAMP_UP_TIME_1_MASK (0x7 << 24) # define PLL_RAMP_UP_TIME_1_SHIFT 24 #define PB0_PIF_PWRDOWN_2 0x17 # define PLL_POWER_STATE_IN_TXS2_2(x) ((x) << 7) # define PLL_POWER_STATE_IN_TXS2_2_MASK (0x7 << 7) # define PLL_POWER_STATE_IN_TXS2_2_SHIFT 7 # define PLL_POWER_STATE_IN_OFF_2(x) ((x) << 10) # define PLL_POWER_STATE_IN_OFF_2_MASK (0x7 << 10) # define PLL_POWER_STATE_IN_OFF_2_SHIFT 10 # define PLL_RAMP_UP_TIME_2(x) ((x) << 24) # define PLL_RAMP_UP_TIME_2_MASK (0x7 << 24) # define PLL_RAMP_UP_TIME_2_SHIFT 24 #define PB0_PIF_PWRDOWN_3 0x18 # define PLL_POWER_STATE_IN_TXS2_3(x) ((x) << 7) # define PLL_POWER_STATE_IN_TXS2_3_MASK (0x7 << 7) # define PLL_POWER_STATE_IN_TXS2_3_SHIFT 7 # define PLL_POWER_STATE_IN_OFF_3(x) ((x) << 10) # define PLL_POWER_STATE_IN_OFF_3_MASK (0x7 << 10) # define PLL_POWER_STATE_IN_OFF_3_SHIFT 10 # define PLL_RAMP_UP_TIME_3(x) ((x) << 24) # define PLL_RAMP_UP_TIME_3_MASK (0x7 << 24) # define PLL_RAMP_UP_TIME_3_SHIFT 24 /* PIF PHY1 registers idx/data 0x10/0x14 */ #define PB1_PIF_CNTL 0x10 #define PB1_PIF_PAIRING 0x11 #define PB1_PIF_PWRDOWN_0 0x12 #define PB1_PIF_PWRDOWN_1 0x13 #define PB1_PIF_PWRDOWN_2 0x17 #define PB1_PIF_PWRDOWN_3 0x18 /* PCIE registers idx/data 0x30/0x34 */ #define PCIE_CNTL2 0x1c /* PCIE */ # define SLV_MEM_LS_EN (1 << 16) # define SLV_MEM_AGGRESSIVE_LS_EN (1 << 17) # define MST_MEM_LS_EN (1 << 18) # define REPLAY_MEM_LS_EN (1 << 19) #define PCIE_LC_STATUS1 0x28 /* PCIE */ # define LC_REVERSE_RCVR (1 << 0) # define LC_REVERSE_XMIT (1 << 1) # define LC_OPERATING_LINK_WIDTH_MASK (0x7 << 2) # define LC_OPERATING_LINK_WIDTH_SHIFT 2 # define LC_DETECTED_LINK_WIDTH_MASK (0x7 << 5) # define LC_DETECTED_LINK_WIDTH_SHIFT 5 #define PCIE_P_CNTL 0x40 /* PCIE */ # define P_IGNORE_EDB_ERR (1 << 6) /* PCIE PORT registers idx/data 0x38/0x3c */ #define PCIE_LC_CNTL 0xa0 # define LC_L0S_INACTIVITY(x) ((x) << 8) # define LC_L0S_INACTIVITY_MASK (0xf << 8) # define LC_L0S_INACTIVITY_SHIFT 8 # define LC_L1_INACTIVITY(x) ((x) << 12) # define LC_L1_INACTIVITY_MASK (0xf << 12) # define LC_L1_INACTIVITY_SHIFT 12 # define LC_PMI_TO_L1_DIS (1 << 16) # define LC_ASPM_TO_L1_DIS (1 << 24) #define PCIE_LC_LINK_WIDTH_CNTL 0xa2 /* PCIE_P */ # define LC_LINK_WIDTH_SHIFT 0 # define LC_LINK_WIDTH_MASK 0x7 # define LC_LINK_WIDTH_X0 0 # define LC_LINK_WIDTH_X1 1 # define LC_LINK_WIDTH_X2 2 # define LC_LINK_WIDTH_X4 3 # define LC_LINK_WIDTH_X8 4 # define LC_LINK_WIDTH_X16 6 # define LC_LINK_WIDTH_RD_SHIFT 4 # define LC_LINK_WIDTH_RD_MASK 0x70 # define LC_RECONFIG_ARC_MISSING_ESCAPE (1 << 7) # define LC_RECONFIG_NOW (1 << 8) # define LC_RENEGOTIATION_SUPPORT (1 << 9) # define LC_RENEGOTIATE_EN (1 << 10) # define LC_SHORT_RECONFIG_EN (1 << 11) # define LC_UPCONFIGURE_SUPPORT (1 << 12) # define LC_UPCONFIGURE_DIS (1 << 13) # define LC_DYN_LANES_PWR_STATE(x) ((x) << 21) # define LC_DYN_LANES_PWR_STATE_MASK (0x3 << 21) # define LC_DYN_LANES_PWR_STATE_SHIFT 21 #define PCIE_LC_N_FTS_CNTL 0xa3 /* PCIE_P */ # define LC_XMIT_N_FTS(x) ((x) << 0) # define LC_XMIT_N_FTS_MASK (0xff << 0) # define LC_XMIT_N_FTS_SHIFT 0 # define LC_XMIT_N_FTS_OVERRIDE_EN (1 << 8) # define LC_N_FTS_MASK (0xff << 24) #define PCIE_LC_SPEED_CNTL 0xa4 /* PCIE_P */ # define LC_GEN2_EN_STRAP (1 << 0) # define LC_GEN3_EN_STRAP (1 << 1) # define LC_TARGET_LINK_SPEED_OVERRIDE_EN (1 << 2) # define LC_TARGET_LINK_SPEED_OVERRIDE_MASK (0x3 << 3) # define LC_TARGET_LINK_SPEED_OVERRIDE_SHIFT 3 # define LC_FORCE_EN_SW_SPEED_CHANGE (1 << 5) # define LC_FORCE_DIS_SW_SPEED_CHANGE (1 << 6) # define LC_FORCE_EN_HW_SPEED_CHANGE (1 << 7) # define LC_FORCE_DIS_HW_SPEED_CHANGE (1 << 8) # define LC_INITIATE_LINK_SPEED_CHANGE (1 << 9) # define LC_SPEED_CHANGE_ATTEMPTS_ALLOWED_MASK (0x3 << 10) # define LC_SPEED_CHANGE_ATTEMPTS_ALLOWED_SHIFT 10 # define LC_CURRENT_DATA_RATE_MASK (0x3 << 13) /* 0/1/2 = gen1/2/3 */ # define LC_CURRENT_DATA_RATE_SHIFT 13 # define LC_CLR_FAILED_SPD_CHANGE_CNT (1 << 16) # define LC_OTHER_SIDE_EVER_SENT_GEN2 (1 << 18) # define LC_OTHER_SIDE_SUPPORTS_GEN2 (1 << 19) # define LC_OTHER_SIDE_EVER_SENT_GEN3 (1 << 20) # define LC_OTHER_SIDE_SUPPORTS_GEN3 (1 << 21) #define PCIE_LC_CNTL2 0xb1 # define LC_ALLOW_PDWN_IN_L1 (1 << 17) # define LC_ALLOW_PDWN_IN_L23 (1 << 18) #define PCIE_LC_CNTL3 0xb5 /* PCIE_P */ # define LC_GO_TO_RECOVERY (1 << 30) #define PCIE_LC_CNTL4 0xb6 /* PCIE_P */ # define LC_REDO_EQ (1 << 5) # define LC_SET_QUIESCE (1 << 13) /* * UVD */ #define UVD_UDEC_ADDR_CONFIG 0xEF4C #define UVD_UDEC_DB_ADDR_CONFIG 0xEF50 #define UVD_UDEC_DBW_ADDR_CONFIG 0xEF54 #define UVD_RBC_RB_RPTR 0xF690 #define UVD_RBC_RB_WPTR 0xF694 #define UVD_CGC_CTRL 0xF4B0 # define DCM (1 << 0) # define CG_DT(x) ((x) << 2) # define CG_DT_MASK (0xf << 2) # define CLK_OD(x) ((x) << 6) # define CLK_OD_MASK (0x1f << 6) /* UVD CTX indirect */ #define UVD_CGC_MEM_CTRL 0xC0 #define UVD_CGC_CTRL2 0xC1 # define DYN_OR_EN (1 << 0) # define DYN_RR_EN (1 << 1) # define G_DIV_ID(x) ((x) << 2) # define G_DIV_ID_MASK (0x7 << 2) /* * PM4 */ #define PACKET0(reg, n) ((RADEON_PACKET_TYPE0 << 30) | \ (((reg) >> 2) & 0xFFFF) | \ ((n) & 0x3FFF) << 16) #define CP_PACKET2 0x80000000 #define PACKET2_PAD_SHIFT 0 #define PACKET2_PAD_MASK (0x3fffffff << 0) #define PACKET2(v) (CP_PACKET2 | REG_SET(PACKET2_PAD, (v))) #define PACKET3(op, n) ((RADEON_PACKET_TYPE3 << 30) | \ (((op) & 0xFF) << 8) | \ ((n) & 0x3FFF) << 16) #define PACKET3_COMPUTE(op, n) (PACKET3(op, n) | 1 << 1) /* Packet 3 types */ #define PACKET3_NOP 0x10 #define PACKET3_SET_BASE 0x11 #define PACKET3_BASE_INDEX(x) ((x) << 0) #define GDS_PARTITION_BASE 2 #define CE_PARTITION_BASE 3 #define PACKET3_CLEAR_STATE 0x12 #define PACKET3_INDEX_BUFFER_SIZE 0x13 #define PACKET3_DISPATCH_DIRECT 0x15 #define PACKET3_DISPATCH_INDIRECT 0x16 #define PACKET3_ALLOC_GDS 0x1B #define PACKET3_WRITE_GDS_RAM 0x1C #define PACKET3_ATOMIC_GDS 0x1D #define PACKET3_ATOMIC 0x1E #define PACKET3_OCCLUSION_QUERY 0x1F #define PACKET3_SET_PREDICATION 0x20 #define PACKET3_REG_RMW 0x21 #define PACKET3_COND_EXEC 0x22 #define PACKET3_PRED_EXEC 0x23 #define PACKET3_DRAW_INDIRECT 0x24 #define PACKET3_DRAW_INDEX_INDIRECT 0x25 #define PACKET3_INDEX_BASE 0x26 #define PACKET3_DRAW_INDEX_2 0x27 #define PACKET3_CONTEXT_CONTROL 0x28 #define PACKET3_INDEX_TYPE 0x2A #define PACKET3_DRAW_INDIRECT_MULTI 0x2C #define PACKET3_DRAW_INDEX_AUTO 0x2D #define PACKET3_DRAW_INDEX_IMMD 0x2E #define PACKET3_NUM_INSTANCES 0x2F #define PACKET3_DRAW_INDEX_MULTI_AUTO 0x30 #define PACKET3_INDIRECT_BUFFER_CONST 0x31 #define PACKET3_INDIRECT_BUFFER 0x32 #define PACKET3_STRMOUT_BUFFER_UPDATE 0x34 #define PACKET3_DRAW_INDEX_OFFSET_2 0x35 #define PACKET3_DRAW_INDEX_MULTI_ELEMENT 0x36 #define PACKET3_WRITE_DATA 0x37 #define WRITE_DATA_DST_SEL(x) ((x) << 8) /* 0 - register * 1 - memory (sync - via GRBM) * 2 - tc/l2 * 3 - gds * 4 - reserved * 5 - memory (async - direct) */ #define WR_ONE_ADDR (1 << 16) #define WR_CONFIRM (1 << 20) #define WRITE_DATA_ENGINE_SEL(x) ((x) << 30) /* 0 - me * 1 - pfp * 2 - ce */ #define PACKET3_DRAW_INDEX_INDIRECT_MULTI 0x38 #define PACKET3_MEM_SEMAPHORE 0x39 #define PACKET3_MPEG_INDEX 0x3A #define PACKET3_COPY_DW 0x3B #define PACKET3_WAIT_REG_MEM 0x3C #define PACKET3_MEM_WRITE 0x3D #define PACKET3_COPY_DATA 0x40 #define PACKET3_CP_DMA 0x41 /* 1. header * 2. SRC_ADDR_LO or DATA [31:0] * 3. CP_SYNC [31] | SRC_SEL [30:29] | ENGINE [27] | DST_SEL [21:20] | * SRC_ADDR_HI [7:0] * 4. DST_ADDR_LO [31:0] * 5. DST_ADDR_HI [7:0] * 6. COMMAND [30:21] | BYTE_COUNT [20:0] */ # define PACKET3_CP_DMA_DST_SEL(x) ((x) << 20) /* 0 - DST_ADDR * 1 - GDS */ # define PACKET3_CP_DMA_ENGINE(x) ((x) << 27) /* 0 - ME * 1 - PFP */ # define PACKET3_CP_DMA_SRC_SEL(x) ((x) << 29) /* 0 - SRC_ADDR * 1 - GDS * 2 - DATA */ # define PACKET3_CP_DMA_CP_SYNC (1 << 31) /* COMMAND */ # define PACKET3_CP_DMA_DIS_WC (1 << 21) # define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 22) /* 0 - none * 1 - 8 in 16 * 2 - 8 in 32 * 3 - 8 in 64 */ # define PACKET3_CP_DMA_CMD_DST_SWAP(x) ((x) << 24) /* 0 - none * 1 - 8 in 16 * 2 - 8 in 32 * 3 - 8 in 64 */ # define PACKET3_CP_DMA_CMD_SAS (1 << 26) /* 0 - memory * 1 - register */ # define PACKET3_CP_DMA_CMD_DAS (1 << 27) /* 0 - memory * 1 - register */ # define PACKET3_CP_DMA_CMD_SAIC (1 << 28) # define PACKET3_CP_DMA_CMD_DAIC (1 << 29) # define PACKET3_CP_DMA_CMD_RAW_WAIT (1 << 30) #define PACKET3_PFP_SYNC_ME 0x42 #define PACKET3_SURFACE_SYNC 0x43 # define PACKET3_DEST_BASE_0_ENA (1 << 0) # define PACKET3_DEST_BASE_1_ENA (1 << 1) # define PACKET3_CB0_DEST_BASE_ENA (1 << 6) # define PACKET3_CB1_DEST_BASE_ENA (1 << 7) # define PACKET3_CB2_DEST_BASE_ENA (1 << 8) # define PACKET3_CB3_DEST_BASE_ENA (1 << 9) # define PACKET3_CB4_DEST_BASE_ENA (1 << 10) # define PACKET3_CB5_DEST_BASE_ENA (1 << 11) # define PACKET3_CB6_DEST_BASE_ENA (1 << 12) # define PACKET3_CB7_DEST_BASE_ENA (1 << 13) # define PACKET3_DB_DEST_BASE_ENA (1 << 14) # define PACKET3_DEST_BASE_2_ENA (1 << 19) # define PACKET3_DEST_BASE_3_ENA (1 << 21) # define PACKET3_TCL1_ACTION_ENA (1 << 22) # define PACKET3_TC_ACTION_ENA (1 << 23) # define PACKET3_CB_ACTION_ENA (1 << 25) # define PACKET3_DB_ACTION_ENA (1 << 26) # define PACKET3_SH_KCACHE_ACTION_ENA (1 << 27) # define PACKET3_SH_ICACHE_ACTION_ENA (1 << 29) #define PACKET3_ME_INITIALIZE 0x44 #define PACKET3_ME_INITIALIZE_DEVICE_ID(x) ((x) << 16) #define PACKET3_COND_WRITE 0x45 #define PACKET3_EVENT_WRITE 0x46 #define EVENT_TYPE(x) ((x) << 0) #define EVENT_INDEX(x) ((x) << 8) /* 0 - any non-TS event * 1 - ZPASS_DONE * 2 - SAMPLE_PIPELINESTAT * 3 - SAMPLE_STREAMOUTSTAT* * 4 - *S_PARTIAL_FLUSH * 5 - EOP events * 6 - EOS events * 7 - CACHE_FLUSH, CACHE_FLUSH_AND_INV_EVENT */ #define INV_L2 (1 << 20) /* INV TC L2 cache when EVENT_INDEX = 7 */ #define PACKET3_EVENT_WRITE_EOP 0x47 #define DATA_SEL(x) ((x) << 29) /* 0 - discard * 1 - send low 32bit data * 2 - send 64bit data * 3 - send 64bit counter value */ #define INT_SEL(x) ((x) << 24) /* 0 - none * 1 - interrupt only (DATA_SEL = 0) * 2 - interrupt when data write is confirmed */ #define PACKET3_EVENT_WRITE_EOS 0x48 #define PACKET3_PREAMBLE_CNTL 0x4A # define PACKET3_PREAMBLE_BEGIN_CLEAR_STATE (2 << 28) # define PACKET3_PREAMBLE_END_CLEAR_STATE (3 << 28) #define PACKET3_ONE_REG_WRITE 0x57 #define PACKET3_LOAD_CONFIG_REG 0x5F #define PACKET3_LOAD_CONTEXT_REG 0x60 #define PACKET3_LOAD_SH_REG 0x61 #define PACKET3_SET_CONFIG_REG 0x68 #define PACKET3_SET_CONFIG_REG_START 0x00008000 #define PACKET3_SET_CONFIG_REG_END 0x0000b000 #define PACKET3_SET_CONTEXT_REG 0x69 #define PACKET3_SET_CONTEXT_REG_START 0x00028000 #define PACKET3_SET_CONTEXT_REG_END 0x00029000 #define PACKET3_SET_CONTEXT_REG_INDIRECT 0x73 #define PACKET3_SET_RESOURCE_INDIRECT 0x74 #define PACKET3_SET_SH_REG 0x76 #define PACKET3_SET_SH_REG_START 0x0000b000 #define PACKET3_SET_SH_REG_END 0x0000c000 #define PACKET3_SET_SH_REG_OFFSET 0x77 #define PACKET3_ME_WRITE 0x7A #define PACKET3_SCRATCH_RAM_WRITE 0x7D #define PACKET3_SCRATCH_RAM_READ 0x7E #define PACKET3_CE_WRITE 0x7F #define PACKET3_LOAD_CONST_RAM 0x80 #define PACKET3_WRITE_CONST_RAM 0x81 #define PACKET3_WRITE_CONST_RAM_OFFSET 0x82 #define PACKET3_DUMP_CONST_RAM 0x83 #define PACKET3_INCREMENT_CE_COUNTER 0x84 #define PACKET3_INCREMENT_DE_COUNTER 0x85 #define PACKET3_WAIT_ON_CE_COUNTER 0x86 #define PACKET3_WAIT_ON_DE_COUNTER 0x87 #define PACKET3_WAIT_ON_DE_COUNTER_DIFF 0x88 #define PACKET3_SET_CE_DE_COUNTERS 0x89 #define PACKET3_WAIT_ON_AVAIL_BUFFER 0x8A #define PACKET3_SWITCH_BUFFER 0x8B /* ASYNC DMA - first instance at 0xd000, second at 0xd800 */ #define DMA0_REGISTER_OFFSET 0x0 /* not a register */ #define DMA1_REGISTER_OFFSET 0x800 /* not a register */ #define DMA_RB_CNTL 0xd000 # define DMA_RB_ENABLE (1 << 0) # define DMA_RB_SIZE(x) ((x) << 1) /* log2 */ # define DMA_RB_SWAP_ENABLE (1 << 9) /* 8IN32 */ # define DMA_RPTR_WRITEBACK_ENABLE (1 << 12) # define DMA_RPTR_WRITEBACK_SWAP_ENABLE (1 << 13) /* 8IN32 */ # define DMA_RPTR_WRITEBACK_TIMER(x) ((x) << 16) /* log2 */ #define DMA_RB_BASE 0xd004 #define DMA_RB_RPTR 0xd008 #define DMA_RB_WPTR 0xd00c #define DMA_RB_RPTR_ADDR_HI 0xd01c #define DMA_RB_RPTR_ADDR_LO 0xd020 #define DMA_IB_CNTL 0xd024 # define DMA_IB_ENABLE (1 << 0) # define DMA_IB_SWAP_ENABLE (1 << 4) #define DMA_IB_RPTR 0xd028 #define DMA_CNTL 0xd02c # define TRAP_ENABLE (1 << 0) # define SEM_INCOMPLETE_INT_ENABLE (1 << 1) # define SEM_WAIT_INT_ENABLE (1 << 2) # define DATA_SWAP_ENABLE (1 << 3) # define FENCE_SWAP_ENABLE (1 << 4) # define CTXEMPTY_INT_ENABLE (1 << 28) #define DMA_STATUS_REG 0xd034 # define DMA_IDLE (1 << 0) #define DMA_TILING_CONFIG 0xd0b8 #define DMA_POWER_CNTL 0xd0bc # define MEM_POWER_OVERRIDE (1 << 8) #define DMA_CLK_CTRL 0xd0c0 #define DMA_PG 0xd0d4 # define PG_CNTL_ENABLE (1 << 0) #define DMA_PGFSM_CONFIG 0xd0d8 #define DMA_PGFSM_WRITE 0xd0dc #define DMA_PACKET(cmd, b, t, s, n) ((((cmd) & 0xF) << 28) | \ (((b) & 0x1) << 26) | \ (((t) & 0x1) << 23) | \ (((s) & 0x1) << 22) | \ (((n) & 0xFFFFF) << 0)) #define DMA_IB_PACKET(cmd, vmid, n) ((((cmd) & 0xF) << 28) | \ (((vmid) & 0xF) << 20) | \ (((n) & 0xFFFFF) << 0)) #define DMA_PTE_PDE_PACKET(n) ((2 << 28) | \ (1 << 26) | \ (1 << 21) | \ (((n) & 0xFFFFF) << 0)) /* async DMA Packet types */ #define DMA_PACKET_WRITE 0x2 #define DMA_PACKET_COPY 0x3 #define DMA_PACKET_INDIRECT_BUFFER 0x4 #define DMA_PACKET_SEMAPHORE 0x5 #define DMA_PACKET_FENCE 0x6 #define DMA_PACKET_TRAP 0x7 #define DMA_PACKET_SRBM_WRITE 0x9 #define DMA_PACKET_CONSTANT_FILL 0xd #define DMA_PACKET_NOP 0xf #define VCE_STATUS 0x20004 #define VCE_VCPU_CNTL 0x20014 #define VCE_CLK_EN (1 << 0) #define VCE_VCPU_CACHE_OFFSET0 0x20024 #define VCE_VCPU_CACHE_SIZE0 0x20028 #define VCE_VCPU_CACHE_OFFSET1 0x2002c #define VCE_VCPU_CACHE_SIZE1 0x20030 #define VCE_VCPU_CACHE_OFFSET2 0x20034 #define VCE_VCPU_CACHE_SIZE2 0x20038 #define VCE_SOFT_RESET 0x20120 #define VCE_ECPU_SOFT_RESET (1 << 0) #define VCE_FME_SOFT_RESET (1 << 2) #define VCE_RB_BASE_LO2 0x2016c #define VCE_RB_BASE_HI2 0x20170 #define VCE_RB_SIZE2 0x20174 #define VCE_RB_RPTR2 0x20178 #define VCE_RB_WPTR2 0x2017c #define VCE_RB_BASE_LO 0x20180 #define VCE_RB_BASE_HI 0x20184 #define VCE_RB_SIZE 0x20188 #define VCE_RB_RPTR 0x2018c #define VCE_RB_WPTR 0x20190 #define VCE_CLOCK_GATING_A 0x202f8 #define VCE_CLOCK_GATING_B 0x202fc #define VCE_UENC_CLOCK_GATING 0x205bc #define VCE_UENC_REG_CLOCK_GATING 0x205c0 #define VCE_FW_REG_STATUS 0x20e10 # define VCE_FW_REG_STATUS_BUSY (1 << 0) # define VCE_FW_REG_STATUS_PASS (1 << 3) # define VCE_FW_REG_STATUS_DONE (1 << 11) #define VCE_LMI_FW_START_KEYSEL 0x20e18 #define VCE_LMI_FW_PERIODIC_CTRL 0x20e20 #define VCE_LMI_CTRL2 0x20e74 #define VCE_LMI_CTRL 0x20e98 #define VCE_LMI_VM_CTRL 0x20ea0 #define VCE_LMI_SWAP_CNTL 0x20eb4 #define VCE_LMI_SWAP_CNTL1 0x20eb8 #define VCE_LMI_CACHE_CTRL 0x20ef4 #define VCE_CMD_NO_OP 0x00000000 #define VCE_CMD_END 0x00000001 #define VCE_CMD_IB 0x00000002 #define VCE_CMD_FENCE 0x00000003 #define VCE_CMD_TRAP 0x00000004 #define VCE_CMD_IB_AUTO 0x00000005 #define VCE_CMD_SEMAPHORE 0x00000006 #endif