/* * Copyright © 2006-2011 Intel Corporation * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * * Authors: * Eric Anholt */ #include #include #include #include "framebuffer.h" #include "psb_drv.h" #include "psb_intel_drv.h" #include "psb_intel_reg.h" #include "psb_intel_display.h" #include "power.h" #include "cdv_device.h" struct cdv_intel_range_t { int min, max; }; struct cdv_intel_p2_t { int dot_limit; int p2_slow, p2_fast; }; struct cdv_intel_clock_t { /* given values */ int n; int m1, m2; int p1, p2; /* derived values */ int dot; int vco; int m; int p; }; #define INTEL_P2_NUM 2 struct cdv_intel_limit_t { struct cdv_intel_range_t dot, vco, n, m, m1, m2, p, p1; struct cdv_intel_p2_t p2; }; #define CDV_LIMIT_SINGLE_LVDS_96 0 #define CDV_LIMIT_SINGLE_LVDS_100 1 #define CDV_LIMIT_DAC_HDMI_27 2 #define CDV_LIMIT_DAC_HDMI_96 3 static const struct cdv_intel_limit_t cdv_intel_limits[] = { { /* CDV_SIGNLE_LVDS_96MHz */ .dot = {.min = 20000, .max = 115500}, .vco = {.min = 1800000, .max = 3600000}, .n = {.min = 2, .max = 6}, .m = {.min = 60, .max = 160}, .m1 = {.min = 0, .max = 0}, .m2 = {.min = 58, .max = 158}, .p = {.min = 28, .max = 140}, .p1 = {.min = 2, .max = 10}, .p2 = {.dot_limit = 200000, .p2_slow = 14, .p2_fast = 14}, }, { /* CDV_SINGLE_LVDS_100MHz */ .dot = {.min = 20000, .max = 115500}, .vco = {.min = 1800000, .max = 3600000}, .n = {.min = 2, .max = 6}, .m = {.min = 60, .max = 160}, .m1 = {.min = 0, .max = 0}, .m2 = {.min = 58, .max = 158}, .p = {.min = 28, .max = 140}, .p1 = {.min = 2, .max = 10}, /* The single-channel range is 25-112Mhz, and dual-channel * is 80-224Mhz. Prefer single channel as much as possible. */ .p2 = {.dot_limit = 200000, .p2_slow = 14, .p2_fast = 14}, }, { /* CDV_DAC_HDMI_27MHz */ .dot = {.min = 20000, .max = 400000}, .vco = {.min = 1809000, .max = 3564000}, .n = {.min = 1, .max = 1}, .m = {.min = 67, .max = 132}, .m1 = {.min = 0, .max = 0}, .m2 = {.min = 65, .max = 130}, .p = {.min = 5, .max = 90}, .p1 = {.min = 1, .max = 9}, .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5}, }, { /* CDV_DAC_HDMI_96MHz */ .dot = {.min = 20000, .max = 400000}, .vco = {.min = 1800000, .max = 3600000}, .n = {.min = 2, .max = 6}, .m = {.min = 60, .max = 160}, .m1 = {.min = 0, .max = 0}, .m2 = {.min = 58, .max = 158}, .p = {.min = 5, .max = 100}, .p1 = {.min = 1, .max = 10}, .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5}, }, }; #define _wait_for(COND, MS, W) ({ \ unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \ int ret__ = 0; \ while (!(COND)) { \ if (time_after(jiffies, timeout__)) { \ ret__ = -ETIMEDOUT; \ break; \ } \ if (W && !in_dbg_master()) \ msleep(W); \ } \ ret__; \ }) #define wait_for(COND, MS) _wait_for(COND, MS, 1) static int cdv_sb_read(struct drm_device *dev, u32 reg, u32 *val) { int ret; ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000); if (ret) { DRM_ERROR("timeout waiting for SB to idle before read\n"); return ret; } REG_WRITE(SB_ADDR, reg); REG_WRITE(SB_PCKT, SET_FIELD(SB_OPCODE_READ, SB_OPCODE) | SET_FIELD(SB_DEST_DPLL, SB_DEST) | SET_FIELD(0xf, SB_BYTE_ENABLE)); ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000); if (ret) { DRM_ERROR("timeout waiting for SB to idle after read\n"); return ret; } *val = REG_READ(SB_DATA); return 0; } static int cdv_sb_write(struct drm_device *dev, u32 reg, u32 val) { int ret; static bool dpio_debug = true; u32 temp; if (dpio_debug) { if (cdv_sb_read(dev, reg, &temp) == 0) DRM_DEBUG_KMS("0x%08x: 0x%08x (before)\n", reg, temp); DRM_DEBUG_KMS("0x%08x: 0x%08x\n", reg, val); } ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000); if (ret) { DRM_ERROR("timeout waiting for SB to idle before write\n"); return ret; } REG_WRITE(SB_ADDR, reg); REG_WRITE(SB_DATA, val); REG_WRITE(SB_PCKT, SET_FIELD(SB_OPCODE_WRITE, SB_OPCODE) | SET_FIELD(SB_DEST_DPLL, SB_DEST) | SET_FIELD(0xf, SB_BYTE_ENABLE)); ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000); if (ret) { DRM_ERROR("timeout waiting for SB to idle after write\n"); return ret; } if (dpio_debug) { if (cdv_sb_read(dev, reg, &temp) == 0) DRM_DEBUG_KMS("0x%08x: 0x%08x (after)\n", reg, temp); } return 0; } /* Reset the DPIO configuration register. The BIOS does this at every * mode set. */ static void cdv_sb_reset(struct drm_device *dev) { REG_WRITE(DPIO_CFG, 0); REG_READ(DPIO_CFG); REG_WRITE(DPIO_CFG, DPIO_MODE_SELECT_0 | DPIO_CMN_RESET_N); } /* Unlike most Intel display engines, on Cedarview the DPLL registers * are behind this sideband bus. They must be programmed while the * DPLL reference clock is on in the DPLL control register, but before * the DPLL is enabled in the DPLL control register. */ static int cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc, struct cdv_intel_clock_t *clock, bool is_lvds) { struct psb_intel_crtc *psb_crtc = to_psb_intel_crtc(crtc); int pipe = psb_crtc->pipe; u32 m, n_vco, p; int ret = 0; int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; int ref_sfr = (pipe == 0) ? SB_REF_DPLLA : SB_REF_DPLLB; u32 ref_value; u32 lane_reg, lane_value; cdv_sb_reset(dev); REG_WRITE(dpll_reg, DPLL_SYNCLOCK_ENABLE | DPLL_VGA_MODE_DIS); udelay(100); /* Follow the BIOS and write the REF/SFR Register. Hardcoded value */ ref_value = 0x68A701; cdv_sb_write(dev, SB_REF_SFR(pipe), ref_value); /* We don't know what the other fields of these regs are, so * leave them in place. */ /* * The BIT 14:13 of 0x8010/0x8030 is used to select the ref clk * for the pipe A/B. Display spec 1.06 has wrong definition. * Correct definition is like below: * * refclka mean use clock from same PLL * * if DPLLA sets 01 and DPLLB sets 01, they use clock from their pll * * if DPLLA sets 01 and DPLLB sets 02, both use clk from DPLLA * */ ret = cdv_sb_read(dev, ref_sfr, &ref_value); if (ret) return ret; ref_value &= ~(REF_CLK_MASK); /* use DPLL_A for pipeB on CRT/HDMI */ if (pipe == 1 && !is_lvds) { DRM_DEBUG_KMS("use DPLLA for pipe B\n"); ref_value |= REF_CLK_DPLLA; } else { DRM_DEBUG_KMS("use their DPLL for pipe A/B\n"); ref_value |= REF_CLK_DPLL; } ret = cdv_sb_write(dev, ref_sfr, ref_value); if (ret) return ret; ret = cdv_sb_read(dev, SB_M(pipe), &m); if (ret) return ret; m &= ~SB_M_DIVIDER_MASK; m |= ((clock->m2) << SB_M_DIVIDER_SHIFT); ret = cdv_sb_write(dev, SB_M(pipe), m); if (ret) return ret; ret = cdv_sb_read(dev, SB_N_VCO(pipe), &n_vco); if (ret) return ret; /* Follow the BIOS to program the N_DIVIDER REG */ n_vco &= 0xFFFF; n_vco |= 0x107; n_vco &= ~(SB_N_VCO_SEL_MASK | SB_N_DIVIDER_MASK | SB_N_CB_TUNE_MASK); n_vco |= ((clock->n) << SB_N_DIVIDER_SHIFT); if (clock->vco < 2250000) { n_vco |= (2 << SB_N_CB_TUNE_SHIFT); n_vco |= (0 << SB_N_VCO_SEL_SHIFT); } else if (clock->vco < 2750000) { n_vco |= (1 << SB_N_CB_TUNE_SHIFT); n_vco |= (1 << SB_N_VCO_SEL_SHIFT); } else if (clock->vco < 3300000) { n_vco |= (0 << SB_N_CB_TUNE_SHIFT); n_vco |= (2 << SB_N_VCO_SEL_SHIFT); } else { n_vco |= (0 << SB_N_CB_TUNE_SHIFT); n_vco |= (3 << SB_N_VCO_SEL_SHIFT); } ret = cdv_sb_write(dev, SB_N_VCO(pipe), n_vco); if (ret) return ret; ret = cdv_sb_read(dev, SB_P(pipe), &p); if (ret) return ret; p &= ~(SB_P2_DIVIDER_MASK | SB_P1_DIVIDER_MASK); p |= SET_FIELD(clock->p1, SB_P1_DIVIDER); switch (clock->p2) { case 5: p |= SET_FIELD(SB_P2_5, SB_P2_DIVIDER); break; case 10: p |= SET_FIELD(SB_P2_10, SB_P2_DIVIDER); break; case 14: p |= SET_FIELD(SB_P2_14, SB_P2_DIVIDER); break; case 7: p |= SET_FIELD(SB_P2_7, SB_P2_DIVIDER); break; default: DRM_ERROR("Bad P2 clock: %d\n", clock->p2); return -EINVAL; } ret = cdv_sb_write(dev, SB_P(pipe), p); if (ret) return ret; lane_reg = PSB_LANE0; cdv_sb_read(dev, lane_reg, &lane_value); lane_value &= ~(LANE_PLL_MASK); lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe); cdv_sb_write(dev, lane_reg, lane_value); lane_reg = PSB_LANE1; cdv_sb_read(dev, lane_reg, &lane_value); lane_value &= ~(LANE_PLL_MASK); lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe); cdv_sb_write(dev, lane_reg, lane_value); lane_reg = PSB_LANE2; cdv_sb_read(dev, lane_reg, &lane_value); lane_value &= ~(LANE_PLL_MASK); lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe); cdv_sb_write(dev, lane_reg, lane_value); lane_reg = PSB_LANE3; cdv_sb_read(dev, lane_reg, &lane_value); lane_value &= ~(LANE_PLL_MASK); lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe); cdv_sb_write(dev, lane_reg, lane_value); return 0; } /* * Returns whether any encoder on the specified pipe is of the specified type */ static bool cdv_intel_pipe_has_type(struct drm_crtc *crtc, int type) { struct drm_device *dev = crtc->dev; struct drm_mode_config *mode_config = &dev->mode_config; struct drm_connector *l_entry; list_for_each_entry(l_entry, &mode_config->connector_list, head) { if (l_entry->encoder && l_entry->encoder->crtc == crtc) { struct psb_intel_encoder *psb_intel_encoder = psb_intel_attached_encoder(l_entry); if (psb_intel_encoder->type == type) return true; } } return false; } static const struct cdv_intel_limit_t *cdv_intel_limit(struct drm_crtc *crtc, int refclk) { const struct cdv_intel_limit_t *limit; if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { /* * Now only single-channel LVDS is supported on CDV. If it is * incorrect, please add the dual-channel LVDS. */ if (refclk == 96000) limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_96]; else limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_100]; } else { if (refclk == 27000) limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_27]; else limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_96]; } return limit; } /* m1 is reserved as 0 in CDV, n is a ring counter */ static void cdv_intel_clock(struct drm_device *dev, int refclk, struct cdv_intel_clock_t *clock) { clock->m = clock->m2 + 2; clock->p = clock->p1 * clock->p2; clock->vco = (refclk * clock->m) / clock->n; clock->dot = clock->vco / clock->p; } #define INTELPllInvalid(s) { /* ErrorF (s) */; return false; } static bool cdv_intel_PLL_is_valid(struct drm_crtc *crtc, const struct cdv_intel_limit_t *limit, struct cdv_intel_clock_t *clock) { if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) INTELPllInvalid("p1 out of range\n"); if (clock->p < limit->p.min || limit->p.max < clock->p) INTELPllInvalid("p out of range\n"); /* unnecessary to check the range of m(m1/M2)/n again */ if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) INTELPllInvalid("vco out of range\n"); /* XXX: We may need to be checking "Dot clock" * depending on the multiplier, connector, etc., * rather than just a single range. */ if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) INTELPllInvalid("dot out of range\n"); return true; } static bool cdv_intel_find_best_PLL(struct drm_crtc *crtc, int target, int refclk, struct cdv_intel_clock_t *best_clock) { struct drm_device *dev = crtc->dev; struct cdv_intel_clock_t clock; const struct cdv_intel_limit_t *limit = cdv_intel_limit(crtc, refclk); int err = target; if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && (REG_READ(LVDS) & LVDS_PORT_EN) != 0) { /* * For LVDS, if the panel is on, just rely on its current * settings for dual-channel. We haven't figured out how to * reliably set up different single/dual channel state, if we * even can. */ if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) clock.p2 = limit->p2.p2_fast; else clock.p2 = limit->p2.p2_slow; } else { if (target < limit->p2.dot_limit) clock.p2 = limit->p2.p2_slow; else clock.p2 = limit->p2.p2_fast; } memset(best_clock, 0, sizeof(*best_clock)); clock.m1 = 0; /* m1 is reserved as 0 in CDV, n is a ring counter. So skip the m1 loop */ for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) { for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max; clock.m2++) { for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max; clock.p1++) { int this_err; cdv_intel_clock(dev, refclk, &clock); if (!cdv_intel_PLL_is_valid(crtc, limit, &clock)) continue; this_err = abs(clock.dot - target); if (this_err < err) { *best_clock = clock; err = this_err; } } } } return err != target; } static int cdv_intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb); int pipe = psb_intel_crtc->pipe; unsigned long start, offset; int dspbase = (pipe == 0 ? DSPABASE : DSPBBASE); int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF); int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE; int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; u32 dspcntr; int ret = 0; if (!gma_power_begin(dev, true)) return 0; /* no fb bound */ if (!crtc->fb) { dev_err(dev->dev, "No FB bound\n"); goto psb_intel_pipe_cleaner; } /* We are displaying this buffer, make sure it is actually loaded into the GTT */ ret = psb_gtt_pin(psbfb->gtt); if (ret < 0) goto psb_intel_pipe_set_base_exit; start = psbfb->gtt->offset; offset = y * crtc->fb->pitches[0] + x * (crtc->fb->bits_per_pixel / 8); REG_WRITE(dspstride, crtc->fb->pitches[0]); dspcntr = REG_READ(dspcntr_reg); dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; switch (crtc->fb->bits_per_pixel) { case 8: dspcntr |= DISPPLANE_8BPP; break; case 16: if (crtc->fb->depth == 15) dspcntr |= DISPPLANE_15_16BPP; else dspcntr |= DISPPLANE_16BPP; break; case 24: case 32: dspcntr |= DISPPLANE_32BPP_NO_ALPHA; break; default: dev_err(dev->dev, "Unknown color depth\n"); ret = -EINVAL; goto psb_intel_pipe_set_base_exit; } REG_WRITE(dspcntr_reg, dspcntr); dev_dbg(dev->dev, "Writing base %08lX %08lX %d %d\n", start, offset, x, y); REG_WRITE(dspbase, offset); REG_READ(dspbase); REG_WRITE(dspsurf, start); REG_READ(dspsurf); psb_intel_pipe_cleaner: /* If there was a previous display we can now unpin it */ if (old_fb) psb_gtt_unpin(to_psb_fb(old_fb)->gtt); psb_intel_pipe_set_base_exit: gma_power_end(dev); return ret; } #define FIFO_PIPEA (1 << 0) #define FIFO_PIPEB (1 << 1) static bool cdv_intel_pipe_enabled(struct drm_device *dev, int pipe) { struct drm_crtc *crtc; struct drm_psb_private *dev_priv = dev->dev_private; struct psb_intel_crtc *psb_intel_crtc = NULL; crtc = dev_priv->pipe_to_crtc_mapping[pipe]; psb_intel_crtc = to_psb_intel_crtc(crtc); if (crtc->fb == NULL || !psb_intel_crtc->active) return false; return true; } static bool cdv_intel_single_pipe_active (struct drm_device *dev) { uint32_t pipe_enabled = 0; if (cdv_intel_pipe_enabled(dev, 0)) pipe_enabled |= FIFO_PIPEA; if (cdv_intel_pipe_enabled(dev, 1)) pipe_enabled |= FIFO_PIPEB; DRM_DEBUG_KMS("pipe enabled %x\n", pipe_enabled); if (pipe_enabled == FIFO_PIPEA || pipe_enabled == FIFO_PIPEB) return true; else return false; } static bool is_pipeb_lvds(struct drm_device *dev, struct drm_crtc *crtc) { struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); struct drm_mode_config *mode_config = &dev->mode_config; struct drm_connector *connector; if (psb_intel_crtc->pipe != 1) return false; list_for_each_entry(connector, &mode_config->connector_list, head) { struct psb_intel_encoder *psb_intel_encoder = psb_intel_attached_encoder(connector); if (!connector->encoder || connector->encoder->crtc != crtc) continue; if (psb_intel_encoder->type == INTEL_OUTPUT_LVDS) return true; } return false; } static void cdv_intel_disable_self_refresh (struct drm_device *dev) { if (REG_READ(FW_BLC_SELF) & FW_BLC_SELF_EN) { /* Disable self-refresh before adjust WM */ REG_WRITE(FW_BLC_SELF, (REG_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN)); REG_READ(FW_BLC_SELF); cdv_intel_wait_for_vblank(dev); /* Cedarview workaround to write ovelay plane, which force to leave * MAX_FIFO state. */ REG_WRITE(OV_OVADD, 0/*dev_priv->ovl_offset*/); REG_READ(OV_OVADD); cdv_intel_wait_for_vblank(dev); } } static void cdv_intel_update_watermark (struct drm_device *dev, struct drm_crtc *crtc) { if (cdv_intel_single_pipe_active(dev)) { u32 fw; fw = REG_READ(DSPFW1); fw &= ~DSP_FIFO_SR_WM_MASK; fw |= (0x7e << DSP_FIFO_SR_WM_SHIFT); fw &= ~CURSOR_B_FIFO_WM_MASK; fw |= (0x4 << CURSOR_B_FIFO_WM_SHIFT); REG_WRITE(DSPFW1, fw); fw = REG_READ(DSPFW2); fw &= ~CURSOR_A_FIFO_WM_MASK; fw |= (0x6 << CURSOR_A_FIFO_WM_SHIFT); fw &= ~DSP_PLANE_C_FIFO_WM_MASK; fw |= (0x8 << DSP_PLANE_C_FIFO_WM_SHIFT); REG_WRITE(DSPFW2, fw); REG_WRITE(DSPFW3, 0x36000000); /* ignore FW4 */ if (is_pipeb_lvds(dev, crtc)) { REG_WRITE(DSPFW5, 0x00040330); } else { fw = (3 << DSP_PLANE_B_FIFO_WM1_SHIFT) | (4 << DSP_PLANE_A_FIFO_WM1_SHIFT) | (3 << CURSOR_B_FIFO_WM1_SHIFT) | (4 << CURSOR_FIFO_SR_WM1_SHIFT); REG_WRITE(DSPFW5, fw); } REG_WRITE(DSPFW6, 0x10); cdv_intel_wait_for_vblank(dev); /* enable self-refresh for single pipe active */ REG_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); REG_READ(FW_BLC_SELF); cdv_intel_wait_for_vblank(dev); } else { /* HW team suggested values... */ REG_WRITE(DSPFW1, 0x3f880808); REG_WRITE(DSPFW2, 0x0b020202); REG_WRITE(DSPFW3, 0x24000000); REG_WRITE(DSPFW4, 0x08030202); REG_WRITE(DSPFW5, 0x01010101); REG_WRITE(DSPFW6, 0x1d0); cdv_intel_wait_for_vblank(dev); cdv_intel_disable_self_refresh(dev); } } /** Loads the palette/gamma unit for the CRTC with the prepared values */ static void cdv_intel_crtc_load_lut(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_psb_private *dev_priv = (struct drm_psb_private *)dev->dev_private; struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); int palreg = PALETTE_A; int i; /* The clocks have to be on to load the palette. */ if (!crtc->enabled) return; switch (psb_intel_crtc->pipe) { case 0: break; case 1: palreg = PALETTE_B; break; case 2: palreg = PALETTE_C; break; default: dev_err(dev->dev, "Illegal Pipe Number.\n"); return; } if (gma_power_begin(dev, false)) { for (i = 0; i < 256; i++) { REG_WRITE(palreg + 4 * i, ((psb_intel_crtc->lut_r[i] + psb_intel_crtc->lut_adj[i]) << 16) | ((psb_intel_crtc->lut_g[i] + psb_intel_crtc->lut_adj[i]) << 8) | (psb_intel_crtc->lut_b[i] + psb_intel_crtc->lut_adj[i])); } gma_power_end(dev); } else { for (i = 0; i < 256; i++) { dev_priv->regs.psb.save_palette_a[i] = ((psb_intel_crtc->lut_r[i] + psb_intel_crtc->lut_adj[i]) << 16) | ((psb_intel_crtc->lut_g[i] + psb_intel_crtc->lut_adj[i]) << 8) | (psb_intel_crtc->lut_b[i] + psb_intel_crtc->lut_adj[i]); } } } /** * Sets the power management mode of the pipe and plane. * * This code should probably grow support for turning the cursor off and back * on appropriately at the same time as we're turning the pipe off/on. */ static void cdv_intel_crtc_dpms(struct drm_crtc *crtc, int mode) { struct drm_device *dev = crtc->dev; struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); int pipe = psb_intel_crtc->pipe; int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; int dspbase_reg = (pipe == 0) ? DSPABASE : DSPBBASE; int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; int pipestat_reg = (pipe == 0) ? PIPEASTAT : PIPEBSTAT; u32 temp; /* XXX: When our outputs are all unaware of DPMS modes other than off * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. */ cdv_intel_disable_self_refresh(dev); switch (mode) { case DRM_MODE_DPMS_ON: case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: if (psb_intel_crtc->active) return; psb_intel_crtc->active = true; /* Enable the DPLL */ temp = REG_READ(dpll_reg); if ((temp & DPLL_VCO_ENABLE) == 0) { REG_WRITE(dpll_reg, temp); REG_READ(dpll_reg); /* Wait for the clocks to stabilize. */ udelay(150); REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); REG_READ(dpll_reg); /* Wait for the clocks to stabilize. */ udelay(150); REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); REG_READ(dpll_reg); /* Wait for the clocks to stabilize. */ udelay(150); } /* Jim Bish - switch plan and pipe per scott */ /* Enable the plane */ temp = REG_READ(dspcntr_reg); if ((temp & DISPLAY_PLANE_ENABLE) == 0) { REG_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE); /* Flush the plane changes */ REG_WRITE(dspbase_reg, REG_READ(dspbase_reg)); } udelay(150); /* Enable the pipe */ temp = REG_READ(pipeconf_reg); if ((temp & PIPEACONF_ENABLE) == 0) REG_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE); temp = REG_READ(pipestat_reg); temp &= ~(0xFFFF); temp |= PIPE_FIFO_UNDERRUN; REG_WRITE(pipestat_reg, temp); REG_READ(pipestat_reg); cdv_intel_update_watermark(dev, crtc); cdv_intel_crtc_load_lut(crtc); /* Give the overlay scaler a chance to enable * if it's on this pipe */ /* psb_intel_crtc_dpms_video(crtc, true); TODO */ psb_intel_crtc->crtc_enable = true; break; case DRM_MODE_DPMS_OFF: if (!psb_intel_crtc->active) return; psb_intel_crtc->active = false; /* Give the overlay scaler a chance to disable * if it's on this pipe */ /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */ /* Disable the VGA plane that we never use */ REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); /* Jim Bish - changed pipe/plane here as well. */ drm_vblank_off(dev, pipe); /* Wait for vblank for the disable to take effect */ cdv_intel_wait_for_vblank(dev); /* Next, disable display pipes */ temp = REG_READ(pipeconf_reg); if ((temp & PIPEACONF_ENABLE) != 0) { REG_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); REG_READ(pipeconf_reg); } /* Wait for vblank for the disable to take effect. */ cdv_intel_wait_for_vblank(dev); udelay(150); /* Disable display plane */ temp = REG_READ(dspcntr_reg); if ((temp & DISPLAY_PLANE_ENABLE) != 0) { REG_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE); /* Flush the plane changes */ REG_WRITE(dspbase_reg, REG_READ(dspbase_reg)); REG_READ(dspbase_reg); } temp = REG_READ(dpll_reg); if ((temp & DPLL_VCO_ENABLE) != 0) { REG_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE); REG_READ(dpll_reg); } /* Wait for the clocks to turn off. */ udelay(150); cdv_intel_update_watermark(dev, crtc); psb_intel_crtc->crtc_enable = false; break; } /*Set FIFO Watermarks*/ REG_WRITE(DSPARB, 0x3F3E); } static void cdv_intel_crtc_prepare(struct drm_crtc *crtc) { struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); } static void cdv_intel_crtc_commit(struct drm_crtc *crtc) { struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); } static bool cdv_intel_crtc_mode_fixup(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { return true; } /** * Return the pipe currently connected to the panel fitter, * or -1 if the panel fitter is not present or not in use */ static int cdv_intel_panel_fitter_pipe(struct drm_device *dev) { u32 pfit_control; pfit_control = REG_READ(PFIT_CONTROL); /* See if the panel fitter is in use */ if ((pfit_control & PFIT_ENABLE) == 0) return -1; return (pfit_control >> 29) & 0x3; } static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, int x, int y, struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; struct drm_psb_private *dev_priv = dev->dev_private; struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); int pipe = psb_intel_crtc->pipe; int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; int dpll_md_reg = (psb_intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD; int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE; int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS; int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; int refclk; struct cdv_intel_clock_t clock; u32 dpll = 0, dspcntr, pipeconf; bool ok; bool is_crt = false, is_lvds = false, is_tv = false; bool is_hdmi = false; struct drm_mode_config *mode_config = &dev->mode_config; struct drm_connector *connector; list_for_each_entry(connector, &mode_config->connector_list, head) { struct psb_intel_encoder *psb_intel_encoder = psb_intel_attached_encoder(connector); if (!connector->encoder || connector->encoder->crtc != crtc) continue; switch (psb_intel_encoder->type) { case INTEL_OUTPUT_LVDS: is_lvds = true; break; case INTEL_OUTPUT_TVOUT: is_tv = true; break; case INTEL_OUTPUT_ANALOG: is_crt = true; break; case INTEL_OUTPUT_HDMI: is_hdmi = true; break; } } if (dev_priv->dplla_96mhz) /* low-end sku, 96/100 mhz */ refclk = 96000; else /* high-end sku, 27/100 mhz */ refclk = 27000; if (is_lvds && dev_priv->lvds_use_ssc) { refclk = dev_priv->lvds_ssc_freq * 1000; DRM_DEBUG_KMS("Use SSC reference clock %d Mhz\n", dev_priv->lvds_ssc_freq); } drm_mode_debug_printmodeline(adjusted_mode); ok = cdv_intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, &clock); if (!ok) { dev_err(dev->dev, "Couldn't find PLL settings for mode!\n"); return 0; } dpll = DPLL_VGA_MODE_DIS; if (is_tv) { /* XXX: just matching BIOS for now */ /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ dpll |= 3; } /* dpll |= PLL_REF_INPUT_DREFCLK; */ dpll |= DPLL_SYNCLOCK_ENABLE; /* if (is_lvds) dpll |= DPLLB_MODE_LVDS; else dpll |= DPLLB_MODE_DAC_SERIAL; */ /* dpll |= (2 << 11); */ /* setup pipeconf */ pipeconf = REG_READ(pipeconf_reg); /* Set up the display plane register */ dspcntr = DISPPLANE_GAMMA_ENABLE; if (pipe == 0) dspcntr |= DISPPLANE_SEL_PIPE_A; else dspcntr |= DISPPLANE_SEL_PIPE_B; dspcntr |= DISPLAY_PLANE_ENABLE; pipeconf |= PIPEACONF_ENABLE; REG_WRITE(dpll_reg, dpll | DPLL_VGA_MODE_DIS | DPLL_SYNCLOCK_ENABLE); REG_READ(dpll_reg); cdv_dpll_set_clock_cdv(dev, crtc, &clock, is_lvds); udelay(150); /* The LVDS pin pair needs to be on before the DPLLs are enabled. * This is an exception to the general rule that mode_set doesn't turn * things on. */ if (is_lvds) { u32 lvds = REG_READ(LVDS); lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT; /* Set the B0-B3 data pairs corresponding to * whether we're going to * set the DPLLs for dual-channel mode or not. */ if (clock.p2 == 7) lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; else lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) * appropriately here, but we need to look more * thoroughly into how panels behave in the two modes. */ REG_WRITE(LVDS, lvds); REG_READ(LVDS); } dpll |= DPLL_VCO_ENABLE; /* Disable the panel fitter if it was on our pipe */ if (cdv_intel_panel_fitter_pipe(dev) == pipe) REG_WRITE(PFIT_CONTROL, 0); DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); drm_mode_debug_printmodeline(mode); REG_WRITE(dpll_reg, (REG_READ(dpll_reg) & ~DPLL_LOCK) | DPLL_VCO_ENABLE); REG_READ(dpll_reg); /* Wait for the clocks to stabilize. */ udelay(150); /* 42 usec w/o calibration, 110 with. rounded up. */ if (!(REG_READ(dpll_reg) & DPLL_LOCK)) { dev_err(dev->dev, "Failed to get DPLL lock\n"); return -EBUSY; } { int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; REG_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT)); } REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16)); REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16)); REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16)); REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16)); REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16)); REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); /* pipesrc and dspsize control the size that is scaled from, * which should always be the user's requested size. */ REG_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); REG_WRITE(dsppos_reg, 0); REG_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); REG_WRITE(pipeconf_reg, pipeconf); REG_READ(pipeconf_reg); cdv_intel_wait_for_vblank(dev); REG_WRITE(dspcntr_reg, dspcntr); /* Flush the plane changes */ { struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; crtc_funcs->mode_set_base(crtc, x, y, old_fb); } cdv_intel_wait_for_vblank(dev); return 0; } /** * Save HW states of giving crtc */ static void cdv_intel_crtc_save(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; /* struct drm_psb_private *dev_priv = (struct drm_psb_private *)dev->dev_private; */ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state; int pipeA = (psb_intel_crtc->pipe == 0); uint32_t paletteReg; int i; if (!crtc_state) { dev_dbg(dev->dev, "No CRTC state found\n"); return; } crtc_state->saveDSPCNTR = REG_READ(pipeA ? DSPACNTR : DSPBCNTR); crtc_state->savePIPECONF = REG_READ(pipeA ? PIPEACONF : PIPEBCONF); crtc_state->savePIPESRC = REG_READ(pipeA ? PIPEASRC : PIPEBSRC); crtc_state->saveFP0 = REG_READ(pipeA ? FPA0 : FPB0); crtc_state->saveFP1 = REG_READ(pipeA ? FPA1 : FPB1); crtc_state->saveDPLL = REG_READ(pipeA ? DPLL_A : DPLL_B); crtc_state->saveHTOTAL = REG_READ(pipeA ? HTOTAL_A : HTOTAL_B); crtc_state->saveHBLANK = REG_READ(pipeA ? HBLANK_A : HBLANK_B); crtc_state->saveHSYNC = REG_READ(pipeA ? HSYNC_A : HSYNC_B); crtc_state->saveVTOTAL = REG_READ(pipeA ? VTOTAL_A : VTOTAL_B); crtc_state->saveVBLANK = REG_READ(pipeA ? VBLANK_A : VBLANK_B); crtc_state->saveVSYNC = REG_READ(pipeA ? VSYNC_A : VSYNC_B); crtc_state->saveDSPSTRIDE = REG_READ(pipeA ? DSPASTRIDE : DSPBSTRIDE); /*NOTE: DSPSIZE DSPPOS only for psb*/ crtc_state->saveDSPSIZE = REG_READ(pipeA ? DSPASIZE : DSPBSIZE); crtc_state->saveDSPPOS = REG_READ(pipeA ? DSPAPOS : DSPBPOS); crtc_state->saveDSPBASE = REG_READ(pipeA ? DSPABASE : DSPBBASE); DRM_DEBUG("(%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n", crtc_state->saveDSPCNTR, crtc_state->savePIPECONF, crtc_state->savePIPESRC, crtc_state->saveFP0, crtc_state->saveFP1, crtc_state->saveDPLL, crtc_state->saveHTOTAL, crtc_state->saveHBLANK, crtc_state->saveHSYNC, crtc_state->saveVTOTAL, crtc_state->saveVBLANK, crtc_state->saveVSYNC, crtc_state->saveDSPSTRIDE, crtc_state->saveDSPSIZE, crtc_state->saveDSPPOS, crtc_state->saveDSPBASE ); paletteReg = pipeA ? PALETTE_A : PALETTE_B; for (i = 0; i < 256; ++i) crtc_state->savePalette[i] = REG_READ(paletteReg + (i << 2)); } /** * Restore HW states of giving crtc */ static void cdv_intel_crtc_restore(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; /* struct drm_psb_private * dev_priv = (struct drm_psb_private *)dev->dev_private; */ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state; /* struct drm_crtc_helper_funcs * crtc_funcs = crtc->helper_private; */ int pipeA = (psb_intel_crtc->pipe == 0); uint32_t paletteReg; int i; if (!crtc_state) { dev_dbg(dev->dev, "No crtc state\n"); return; } DRM_DEBUG( "current:(%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n", REG_READ(pipeA ? DSPACNTR : DSPBCNTR), REG_READ(pipeA ? PIPEACONF : PIPEBCONF), REG_READ(pipeA ? PIPEASRC : PIPEBSRC), REG_READ(pipeA ? FPA0 : FPB0), REG_READ(pipeA ? FPA1 : FPB1), REG_READ(pipeA ? DPLL_A : DPLL_B), REG_READ(pipeA ? HTOTAL_A : HTOTAL_B), REG_READ(pipeA ? HBLANK_A : HBLANK_B), REG_READ(pipeA ? HSYNC_A : HSYNC_B), REG_READ(pipeA ? VTOTAL_A : VTOTAL_B), REG_READ(pipeA ? VBLANK_A : VBLANK_B), REG_READ(pipeA ? VSYNC_A : VSYNC_B), REG_READ(pipeA ? DSPASTRIDE : DSPBSTRIDE), REG_READ(pipeA ? DSPASIZE : DSPBSIZE), REG_READ(pipeA ? DSPAPOS : DSPBPOS), REG_READ(pipeA ? DSPABASE : DSPBBASE) ); DRM_DEBUG( "saved: (%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n", crtc_state->saveDSPCNTR, crtc_state->savePIPECONF, crtc_state->savePIPESRC, crtc_state->saveFP0, crtc_state->saveFP1, crtc_state->saveDPLL, crtc_state->saveHTOTAL, crtc_state->saveHBLANK, crtc_state->saveHSYNC, crtc_state->saveVTOTAL, crtc_state->saveVBLANK, crtc_state->saveVSYNC, crtc_state->saveDSPSTRIDE, crtc_state->saveDSPSIZE, crtc_state->saveDSPPOS, crtc_state->saveDSPBASE ); if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) { REG_WRITE(pipeA ? DPLL_A : DPLL_B, crtc_state->saveDPLL & ~DPLL_VCO_ENABLE); REG_READ(pipeA ? DPLL_A : DPLL_B); DRM_DEBUG("write dpll: %x\n", REG_READ(pipeA ? DPLL_A : DPLL_B)); udelay(150); } REG_WRITE(pipeA ? FPA0 : FPB0, crtc_state->saveFP0); REG_READ(pipeA ? FPA0 : FPB0); REG_WRITE(pipeA ? FPA1 : FPB1, crtc_state->saveFP1); REG_READ(pipeA ? FPA1 : FPB1); REG_WRITE(pipeA ? DPLL_A : DPLL_B, crtc_state->saveDPLL); REG_READ(pipeA ? DPLL_A : DPLL_B); udelay(150); REG_WRITE(pipeA ? HTOTAL_A : HTOTAL_B, crtc_state->saveHTOTAL); REG_WRITE(pipeA ? HBLANK_A : HBLANK_B, crtc_state->saveHBLANK); REG_WRITE(pipeA ? HSYNC_A : HSYNC_B, crtc_state->saveHSYNC); REG_WRITE(pipeA ? VTOTAL_A : VTOTAL_B, crtc_state->saveVTOTAL); REG_WRITE(pipeA ? VBLANK_A : VBLANK_B, crtc_state->saveVBLANK); REG_WRITE(pipeA ? VSYNC_A : VSYNC_B, crtc_state->saveVSYNC); REG_WRITE(pipeA ? DSPASTRIDE : DSPBSTRIDE, crtc_state->saveDSPSTRIDE); REG_WRITE(pipeA ? DSPASIZE : DSPBSIZE, crtc_state->saveDSPSIZE); REG_WRITE(pipeA ? DSPAPOS : DSPBPOS, crtc_state->saveDSPPOS); REG_WRITE(pipeA ? PIPEASRC : PIPEBSRC, crtc_state->savePIPESRC); REG_WRITE(pipeA ? DSPABASE : DSPBBASE, crtc_state->saveDSPBASE); REG_WRITE(pipeA ? PIPEACONF : PIPEBCONF, crtc_state->savePIPECONF); cdv_intel_wait_for_vblank(dev); REG_WRITE(pipeA ? DSPACNTR : DSPBCNTR, crtc_state->saveDSPCNTR); REG_WRITE(pipeA ? DSPABASE : DSPBBASE, crtc_state->saveDSPBASE); cdv_intel_wait_for_vblank(dev); paletteReg = pipeA ? PALETTE_A : PALETTE_B; for (i = 0; i < 256; ++i) REG_WRITE(paletteReg + (i << 2), crtc_state->savePalette[i]); } static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv, uint32_t handle, uint32_t width, uint32_t height) { struct drm_device *dev = crtc->dev; struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); int pipe = psb_intel_crtc->pipe; uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; uint32_t temp; size_t addr = 0; struct gtt_range *gt; struct drm_gem_object *obj; int ret; /* if we want to turn of the cursor ignore width and height */ if (!handle) { /* turn off the cursor */ temp = CURSOR_MODE_DISABLE; if (gma_power_begin(dev, false)) { REG_WRITE(control, temp); REG_WRITE(base, 0); gma_power_end(dev); } /* unpin the old GEM object */ if (psb_intel_crtc->cursor_obj) { gt = container_of(psb_intel_crtc->cursor_obj, struct gtt_range, gem); psb_gtt_unpin(gt); drm_gem_object_unreference(psb_intel_crtc->cursor_obj); psb_intel_crtc->cursor_obj = NULL; } return 0; } /* Currently we only support 64x64 cursors */ if (width != 64 || height != 64) { dev_dbg(dev->dev, "we currently only support 64x64 cursors\n"); return -EINVAL; } obj = drm_gem_object_lookup(dev, file_priv, handle); if (!obj) return -ENOENT; if (obj->size < width * height * 4) { dev_dbg(dev->dev, "buffer is to small\n"); return -ENOMEM; } gt = container_of(obj, struct gtt_range, gem); /* Pin the memory into the GTT */ ret = psb_gtt_pin(gt); if (ret) { dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle); return ret; } addr = gt->offset; /* Or resource.start ??? */ psb_intel_crtc->cursor_addr = addr; temp = 0; /* set the pipe for the cursor */ temp |= (pipe << 28); temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; if (gma_power_begin(dev, false)) { REG_WRITE(control, temp); REG_WRITE(base, addr); gma_power_end(dev); } /* unpin the old GEM object */ if (psb_intel_crtc->cursor_obj) { gt = container_of(psb_intel_crtc->cursor_obj, struct gtt_range, gem); psb_gtt_unpin(gt); drm_gem_object_unreference(psb_intel_crtc->cursor_obj); psb_intel_crtc->cursor_obj = obj; } return 0; } static int cdv_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) { struct drm_device *dev = crtc->dev; struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); int pipe = psb_intel_crtc->pipe; uint32_t temp = 0; uint32_t adder; if (x < 0) { temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT); x = -x; } if (y < 0) { temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT); y = -y; } temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT); temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT); adder = psb_intel_crtc->cursor_addr; if (gma_power_begin(dev, false)) { REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp); REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder); gma_power_end(dev); } return 0; } static void cdv_intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue, uint32_t start, uint32_t size) { struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); int i; int end = (start + size > 256) ? 256 : start + size; for (i = start; i < end; i++) { psb_intel_crtc->lut_r[i] = red[i] >> 8; psb_intel_crtc->lut_g[i] = green[i] >> 8; psb_intel_crtc->lut_b[i] = blue[i] >> 8; } cdv_intel_crtc_load_lut(crtc); } static int cdv_crtc_set_config(struct drm_mode_set *set) { int ret = 0; struct drm_device *dev = set->crtc->dev; struct drm_psb_private *dev_priv = dev->dev_private; if (!dev_priv->rpm_enabled) return drm_crtc_helper_set_config(set); pm_runtime_forbid(&dev->pdev->dev); ret = drm_crtc_helper_set_config(set); pm_runtime_allow(&dev->pdev->dev); return ret; } /** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ /* FIXME: why are we using this, should it be cdv_ in this tree ? */ static void i8xx_clock(int refclk, struct cdv_intel_clock_t *clock) { clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); clock->p = clock->p1 * clock->p2; clock->vco = refclk * clock->m / (clock->n + 2); clock->dot = clock->vco / clock->p; } /* Returns the clock of the currently programmed mode of the given pipe. */ static int cdv_intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) { struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); int pipe = psb_intel_crtc->pipe; u32 dpll; u32 fp; struct cdv_intel_clock_t clock; bool is_lvds; struct drm_psb_private *dev_priv = dev->dev_private; if (gma_power_begin(dev, false)) { dpll = REG_READ((pipe == 0) ? DPLL_A : DPLL_B); if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) fp = REG_READ((pipe == 0) ? FPA0 : FPB0); else fp = REG_READ((pipe == 0) ? FPA1 : FPB1); is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN); gma_power_end(dev); } else { dpll = (pipe == 0) ? dev_priv->regs.psb.saveDPLL_A : dev_priv->regs.psb.saveDPLL_B; if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) fp = (pipe == 0) ? dev_priv->regs.psb.saveFPA0 : dev_priv->regs.psb.saveFPB0; else fp = (pipe == 0) ? dev_priv->regs.psb.saveFPA1 : dev_priv->regs.psb.saveFPB1; is_lvds = (pipe == 1) && (dev_priv->regs.psb.saveLVDS & LVDS_PORT_EN); } clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT; if (is_lvds) { clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> DPLL_FPA01_P1_POST_DIV_SHIFT); if (clock.p1 == 0) { clock.p1 = 4; dev_err(dev->dev, "PLL %d\n", dpll); } clock.p2 = 14; if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN) { /* XXX: might not be 66MHz */ i8xx_clock(66000, &clock); } else i8xx_clock(48000, &clock); } else { if (dpll & PLL_P1_DIVIDE_BY_TWO) clock.p1 = 2; else { clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >> DPLL_FPA01_P1_POST_DIV_SHIFT) + 2; } if (dpll & PLL_P2_DIVIDE_BY_4) clock.p2 = 4; else clock.p2 = 2; i8xx_clock(48000, &clock); } /* XXX: It would be nice to validate the clocks, but we can't reuse * i830PllIsValid() because it relies on the xf86_config connector * configuration being accurate, which it isn't necessarily. */ return clock.dot; } /** Returns the currently programmed mode of the given pipe. */ struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev, struct drm_crtc *crtc) { struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); int pipe = psb_intel_crtc->pipe; struct drm_display_mode *mode; int htot; int hsync; int vtot; int vsync; struct drm_psb_private *dev_priv = dev->dev_private; if (gma_power_begin(dev, false)) { htot = REG_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B); hsync = REG_READ((pipe == 0) ? HSYNC_A : HSYNC_B); vtot = REG_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B); vsync = REG_READ((pipe == 0) ? VSYNC_A : VSYNC_B); gma_power_end(dev); } else { htot = (pipe == 0) ? dev_priv->regs.psb.saveHTOTAL_A : dev_priv->regs.psb.saveHTOTAL_B; hsync = (pipe == 0) ? dev_priv->regs.psb.saveHSYNC_A : dev_priv->regs.psb.saveHSYNC_B; vtot = (pipe == 0) ? dev_priv->regs.psb.saveVTOTAL_A : dev_priv->regs.psb.saveVTOTAL_B; vsync = (pipe == 0) ? dev_priv->regs.psb.saveVSYNC_A : dev_priv->regs.psb.saveVSYNC_B; } mode = kzalloc(sizeof(*mode), GFP_KERNEL); if (!mode) return NULL; mode->clock = cdv_intel_crtc_clock_get(dev, crtc); mode->hdisplay = (htot & 0xffff) + 1; mode->htotal = ((htot & 0xffff0000) >> 16) + 1; mode->hsync_start = (hsync & 0xffff) + 1; mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1; mode->vdisplay = (vtot & 0xffff) + 1; mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1; mode->vsync_start = (vsync & 0xffff) + 1; mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1; drm_mode_set_name(mode); drm_mode_set_crtcinfo(mode, 0); return mode; } static void cdv_intel_crtc_destroy(struct drm_crtc *crtc) { struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); kfree(psb_intel_crtc->crtc_state); drm_crtc_cleanup(crtc); kfree(psb_intel_crtc); } const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = { .dpms = cdv_intel_crtc_dpms, .mode_fixup = cdv_intel_crtc_mode_fixup, .mode_set = cdv_intel_crtc_mode_set, .mode_set_base = cdv_intel_pipe_set_base, .prepare = cdv_intel_crtc_prepare, .commit = cdv_intel_crtc_commit, }; const struct drm_crtc_funcs cdv_intel_crtc_funcs = { .save = cdv_intel_crtc_save, .restore = cdv_intel_crtc_restore, .cursor_set = cdv_intel_crtc_cursor_set, .cursor_move = cdv_intel_crtc_cursor_move, .gamma_set = cdv_intel_crtc_gamma_set, .set_config = cdv_crtc_set_config, .destroy = cdv_intel_crtc_destroy, };