/* * MPC8377E RDB Device Tree Source * * Copyright 2007, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ /dts-v1/; / { compatible = "fsl,mpc8377rdb"; #address-cells = <1>; #size-cells = <1>; aliases { ethernet0 = &enet0; ethernet1 = &enet1; serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; }; cpus { #address-cells = <1>; #size-cells = <0>; PowerPC,8377@0 { device_type = "cpu"; reg = <0x0>; d-cache-line-size = <32>; i-cache-line-size = <32>; d-cache-size = <32768>; i-cache-size = <32768>; timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; }; }; memory { device_type = "memory"; reg = <0x00000000 0x10000000>; // 256MB at 0 }; localbus@e0005000 { #address-cells = <2>; #size-cells = <1>; compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus"; reg = <0xe0005000 0x1000>; interrupts = <77 0x8>; interrupt-parent = <&ipic>; // CS0 and CS1 are swapped when // booting from nand, but the // addresses are the same. ranges = <0x0 0x0 0xfe000000 0x00800000 0x1 0x0 0xe0600000 0x00008000 0x2 0x0 0xf0000000 0x00020000 0x3 0x0 0xfa000000 0x00008000>; flash@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x800000>; bank-width = <2>; device-width = <1>; }; nand@1,0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8377-fcm-nand", "fsl,elbc-fcm-nand"; reg = <0x1 0x0 0x8000>; u-boot@0 { reg = <0x0 0x100000>; read-only; }; kernel@100000 { reg = <0x100000 0x300000>; }; fs@400000 { reg = <0x400000 0x1c00000>; }; }; }; immr@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; wdt@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; reg = <0x200 0x100>; }; i2c@3000 { #address-cells = <1>; #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; reg = <0x3000 0x100>; interrupts = <14 0x8>; interrupt-parent = <&ipic>; dfsrr; rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; }; mcu_pio: mcu@a { #gpio-cells = <2>; compatible = "fsl,mc9s08qg8-mpc8377erdb", "fsl,mcu-mpc8349emitx"; reg = <0x0a>; gpio-controller; }; }; i2c@3100 { #address-cells = <1>; #size-cells = <0>; cell-index = <1>; compatible = "fsl-i2c"; reg = <0x3100 0x100>; interrupts = <15 0x8>; interrupt-parent = <&ipic>; dfsrr; }; spi@7000 { cell-index = <0>; compatible = "fsl,spi"; reg = <0x7000 0x1000>; interrupts = <16 0x8>; interrupt-parent = <&ipic>; mode = "cpu"; }; dma@82a8 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8377-dma", "fsl,elo-dma"; reg = <0x82a8 4>; ranges = <0 0x8100 0x1a8>; interrupt-parent = <&ipic>; interrupts = <71 8>; cell-index = <0>; dma-channel@0 { compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; reg = <0 0x80>; cell-index = <0>; interrupt-parent = <&ipic>; interrupts = <71 8>; }; dma-channel@80 { compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; reg = <0x80 0x80>; cell-index = <1>; interrupt-parent = <&ipic>; interrupts = <71 8>; }; dma-channel@100 { compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; reg = <0x100 0x80>; cell-index = <2>; interrupt-parent = <&ipic>; interrupts = <71 8>; }; dma-channel@180 { compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; reg = <0x180 0x28>; cell-index = <3>; interrupt-parent = <&ipic>; interrupts = <71 8>; }; }; usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; #address-cells = <1>; #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; phy_type = "ulpi"; }; mdio@24520 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; reg = <0x24520 0x20>; phy2: ethernet-phy@2 { interrupt-parent = <&ipic>; interrupts = <17 0x8>; reg = <0x2>; device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; device_type = "tbi-phy"; }; }; mdio@25520 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-tbi"; reg = <0x25520 0x20>; tbi1: tbi-phy@11 { reg = <0x11>; device_type = "tbi-phy"; }; }; enet0: ethernet@24000 { cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <32 0x8 33 0x8 34 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; tbi-handle = <&tbi0>; phy-handle = <&phy2>; }; enet1: ethernet@25000 { cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; fixed-link = <1 1 1000 0 0>; tbi-handle = <&tbi1>; }; serial0: serial@4500 { cell-index = <0>; device_type = "serial"; compatible = "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; interrupt-parent = <&ipic>; }; serial1: serial@4600 { cell-index = <1>; device_type = "serial"; compatible = "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; interrupt-parent = <&ipic>; }; crypto@30000 { compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; reg = <0x30000 0x10000>; interrupts = <11 0x8>; interrupt-parent = <&ipic>; fsl,num-channels = <4>; fsl,channel-fifo-len = <24>; fsl,exec-units-mask = <0x9fe>; fsl,descriptor-types-mask = <0x3ab0ebf>; }; sata@18000 { compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; reg = <0x18000 0x1000>; interrupts = <44 0x8>; interrupt-parent = <&ipic>; }; sata@19000 { compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; reg = <0x19000 0x1000>; interrupts = <45 0x8>; interrupt-parent = <&ipic>; }; /* IPIC * interrupts cell = <intr #, sense> * sense values match linux IORESOURCE_IRQ_* defines: * sense == 8: Level, low assertion * sense == 2: Edge, high-to-low change */ ipic: interrupt-controller@700 { compatible = "fsl,ipic"; interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; reg = <0x700 0x100>; }; }; pci0: pci@e0008500 { interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ /* IDSEL AD14 IRQ6 inta */ 0x7000 0x0 0x0 0x1 &ipic 22 0x8 /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */ 0x7800 0x0 0x0 0x1 &ipic 21 0x8 0x7800 0x0 0x0 0x2 &ipic 22 0x8 0x7800 0x0 0x0 0x4 &ipic 23 0x8 /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/ 0xE000 0x0 0x0 0x1 &ipic 23 0x8 0xE000 0x0 0x0 0x2 &ipic 21 0x8 0xE000 0x0 0x0 0x3 &ipic 22 0x8>; interrupt-parent = <&ipic>; interrupts = <66 0x8>; bus-range = <0 0>; ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0xe0008500 0x100 /* internal registers */ 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; };