From d09f3ecf1a7ba658934fa3c45f67ed2620a50950 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 15 Aug 2011 11:01:02 +0900 Subject: ASoC: Disable pulls on WM8994 AIF2 when starting it Pull control is availalbe for WM8994 AIF2, generally disabled as part of the GPIO configuration in order to save power after system startup. As on newer devices in the series there is no GPIO functionality on these pins this will happen less naturally so have the driver disable the pulls as the AIF is probed. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'sound') diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index e5691ad8a2d3..0f36eeeb5fae 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -2459,6 +2459,21 @@ static int wm8994_set_tristate(struct snd_soc_dai *codec_dai, int tristate) return snd_soc_update_bits(codec, reg, mask, val); } +static int wm8994_aif2_probe(struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + + /* Disable the pulls on the AIF if we're using it to save power. */ + snd_soc_update_bits(codec, WM8994_GPIO_3, + WM8994_GPN_PU | WM8994_GPN_PD, 0); + snd_soc_update_bits(codec, WM8994_GPIO_4, + WM8994_GPN_PU | WM8994_GPN_PD, 0); + snd_soc_update_bits(codec, WM8994_GPIO_5, + WM8994_GPN_PU | WM8994_GPN_PD, 0); + + return 0; +} + #define WM8994_RATES SNDRV_PCM_RATE_8000_96000 #define WM8994_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ @@ -2526,6 +2541,7 @@ static struct snd_soc_dai_driver wm8994_dai[] = { .rates = WM8994_RATES, .formats = WM8994_FORMATS, }, + .probe = wm8994_aif2_probe, .ops = &wm8994_aif2_dai_ops, }, { -- cgit v1.2.1