From 82b01149ec94d746867d7f9156c44d775d4d2d67 Mon Sep 17 00:00:00 2001 From: Jian-Hong Pan Date: Thu, 27 Dec 2018 16:46:31 +0800 Subject: ALSA: hda/realtek: Enable the headset mic auto detection for ASUS laptops The headset mic of ASUS laptops like UX533FD, UX433FN and UX333FA, whose CODEC is Realtek ALC294 has jack auto detection feature. This patch enables the feature. Fixes: 4e051106730d ("ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294") Signed-off-by: Daniel Drake Signed-off-by: Jian-Hong Pan Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a4f4a9dd488d..aee4cbd29d53 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6501,7 +6501,7 @@ static const struct hda_fixup alc269_fixups[] = { [ALC294_FIXUP_ASUS_HEADSET_MIC] = { .type = HDA_FIXUP_PINS, .v.pins = (const struct hda_pintbl[]) { - { 0x19, 0x01a1113c }, /* use as headset mic, without its own jack detect */ + { 0x19, 0x01a1103c }, /* use as headset mic */ { } }, .chained = true, -- cgit v1.2.1 From 63d2a9ec310d8bcc955574220d4631aa55c1a80c Mon Sep 17 00:00:00 2001 From: Sameer Pujar Date: Wed, 26 Dec 2018 16:04:49 +0530 Subject: ALSA: hda/tegra: clear pending irq handlers Even after disabling interrupts on the module, it could be possible that irq handlers are still running. System hang is seen during suspend path. It was found that, there were pending writes on the HDA bus and clock was disabled by that time. Above mentioned issue is fixed by clearing any pending irq handlers before disabling clocks and returning from hda suspend. Suggested-by: Mohan Kumar Suggested-by: Dara Ramesh Signed-off-by: Sameer Pujar Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_tegra.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'sound') diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c index 83befd8d43e8..97a176d817a0 100644 --- a/sound/pci/hda/hda_tegra.c +++ b/sound/pci/hda/hda_tegra.c @@ -234,10 +234,12 @@ static int hda_tegra_suspend(struct device *dev) struct snd_card *card = dev_get_drvdata(dev); struct azx *chip = card->private_data; struct hda_tegra *hda = container_of(chip, struct hda_tegra, chip); + struct hdac_bus *bus = azx_bus(chip); snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); azx_stop_chip(chip); + synchronize_irq(bus->irq); azx_enter_link_reset(chip); hda_tegra_disable_clocks(hda); -- cgit v1.2.1 From 3e9ad24b0e91c066311a958afbd6210dda8a43eb Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 31 Dec 2018 19:02:01 +0100 Subject: ALSA: hda - Revert DSP detection on legacy HD-audio driver This essentially reverts the commits c337104b1a16 ("ALSA: HD-Audio: SKL+: abort probe if DSP is present and Skylake driver selected") and d82b51c855a2 ("ALSA: HD-Audio: SKL+: force HDaudio legacy or SKL+ driver selection") for the path of legacy HD-audio controller (snd-hda-intel). The automatic DSP detection and skip of binding with the legacy driver caused regressions on several machines like Dell XPS13. They give the PCI class 0x40380 indicating the availability of DSP while they don't work with ASoC SKL driver (yet). As the support of ASoC driver for such devices isn't available, it's better to revert the whole DSP-detection-and-skip behavior of the legacy driver, so that we can get the old good driver working on such devices. The pci_binding option for ASoC SKL driver is still kept so that it can work without blacklisting. Fixes: c337104b1a16 ("ALSA: HD-Audio: SKL+: abort probe if DSP is present and Skylake driver selected") Reported-by: Linus Torvalds Reported-by: Hans de Goede Reported-by: Azat Khuzhin Cc: Pierre-Louis Bossart Signed-off-by: Takashi Iwai --- sound/pci/hda/Kconfig | 62 ------------------------------------------ sound/pci/hda/hda_controller.h | 2 +- sound/pci/hda/hda_intel.c | 54 +++++------------------------------- sound/soc/intel/Kconfig | 6 ---- 4 files changed, 8 insertions(+), 116 deletions(-) (limited to 'sound') diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig index 0d38c006e182..4235907b7858 100644 --- a/sound/pci/hda/Kconfig +++ b/sound/pci/hda/Kconfig @@ -226,68 +226,6 @@ config SND_HDA_POWER_SAVE_DEFAULT The default time-out value in seconds for HD-audio automatic power-save mode. 0 means to disable the power-save mode. -if SND_HDA_INTEL - -# The options below should not be enabled by distributions or -# users. They are selected by Intel/Skylake or SOF drivers when they -# register for a PCI ID which is also handled by the HDAudio legacy -# driver. When this option is selected and the DSP is detected based on -# the PCI class/subclass/prog-if, the probe of the HDAudio legacy -# aborts. This mechanism removes the need for distributions to use -# blacklists. It can be bypassed with module parameters should the -# Intel/Skylake or SOF drivers fail to handle a specific platform. - -config SND_HDA_INTEL_DSP_DETECTION_SKL - bool - help - This option is selected by SOF or SST drivers, not users or distros. - It enables DSP detection based on PCI class information for - Skylake machines. - -config SND_HDA_INTEL_DSP_DETECTION_APL - bool - help - This option is selected by SOF or SST drivers, not users or distros. - It enables DSP detection based on PCI class information for - Broxton/ApolloLake machines - -config SND_HDA_INTEL_DSP_DETECTION_KBL - bool - help - This option is selected by SOF or SST drivers, not users or distros. - It enables DSP detection based on PCI class information for - KabyLake machines - -config SND_HDA_INTEL_DSP_DETECTION_GLK - bool - help - This option is selected by SOF or SST drivers, not users or distros. - It enables DSP detection based on PCI class information for - GeminiLake machines - -config SND_HDA_INTEL_DSP_DETECTION_CNL - bool - help - This option is selected by SOF or SST drivers, not users or distros. - It enables DSP detection based on PCI class information for - CannonLake machines - -config SND_HDA_INTEL_DSP_DETECTION_CFL - bool - help - This option is selected by SOF or SST drivers, not users or distros. - It enables DSP detection based on PCI class information for - CoffeeLake machines - -config SND_HDA_INTEL_DSP_DETECTION_ICL - bool - help - This option is selected by SOF or SST drivers, not users or distros. - It enables DSP detection based on PCI class information for - IceLake machines - -endif ## SND_HDA_INTEL - endif endmenu diff --git a/sound/pci/hda/hda_controller.h b/sound/pci/hda/hda_controller.h index e0c3fcbaa028..7185ed574b41 100644 --- a/sound/pci/hda/hda_controller.h +++ b/sound/pci/hda/hda_controller.h @@ -37,7 +37,7 @@ #else #define AZX_DCAPS_I915_COMPONENT 0 /* NOP */ #endif -#define AZX_DCAPS_INTEL_SHARED (1 << 14) /* shared with ASoC */ +/* 14 unused */ #define AZX_DCAPS_CTX_WORKAROUND (1 << 15) /* X-Fi workaround */ #define AZX_DCAPS_POSFIX_LPIB (1 << 16) /* Use LPIB as default */ /* 17 unused */ diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index e42cc2230977..e784130ea4e0 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -172,9 +172,6 @@ module_param_array(beep_mode, bool, NULL, 0444); MODULE_PARM_DESC(beep_mode, "Select HDA Beep registration mode " "(0=off, 1=on) (default=1)."); #endif -static int skl_pci_binding; -module_param_named(pci_binding, skl_pci_binding, int, 0444); -MODULE_PARM_DESC(pci_binding, "PCI binding (0=auto, 1=only legacy, 2=only asoc"); #ifdef CONFIG_PM static int param_set_xint(const char *val, const struct kernel_param *kp); @@ -360,7 +357,6 @@ enum { AZX_DCAPS_NO_64BIT |\ AZX_DCAPS_4K_BDLE_BOUNDARY | AZX_DCAPS_SNOOP_OFF) -#define AZX_DCAPS_INTEL_DSP_DETECTION(conf) (IS_ENABLED(CONFIG_SND_HDA_INTEL_DSP_DETECTION_##conf) ? AZX_DCAPS_INTEL_SHARED : 0) /* * vga_switcheroo support */ @@ -2052,28 +2048,6 @@ static int azx_probe(struct pci_dev *pci, bool schedule_probe; int err; - /* check if this driver can be used on SKL+ Intel platforms */ - if (pci_id->driver_data & AZX_DCAPS_INTEL_SHARED) { - switch (skl_pci_binding) { - case SND_SKL_PCI_BIND_AUTO: - if (pci->class != 0x040300) { - dev_info(&pci->dev, "The DSP is enabled on this platform, aborting probe\n"); - return -ENODEV; - } - dev_info(&pci->dev, "No DSP detected, continuing HDaudio legacy probe\n"); - break; - case SND_SKL_PCI_BIND_LEGACY: - dev_info(&pci->dev, "Module parameter forced binding with HDaudio legacy, bypassed detection logic\n"); - break; - case SND_SKL_PCI_BIND_ASOC: - dev_info(&pci->dev, "Module parameter forced binding with SKL+ ASoC driver, aborting probe\n"); - return -ENODEV; - default: - dev_err(&pci->dev, "invalid value for skl_pci_binding module parameter, ignored\n"); - break; - } - } - if (dev >= SNDRV_CARDS) return -ENODEV; if (!enable[dev]) { @@ -2380,48 +2354,34 @@ static const struct pci_device_id azx_ids[] = { .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE }, /* Sunrise Point-LP */ { PCI_DEVICE(0x8086, 0x9d70), - .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE | - AZX_DCAPS_INTEL_DSP_DETECTION(SKL) - }, + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE }, /* Kabylake */ { PCI_DEVICE(0x8086, 0xa171), .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE }, /* Kabylake-LP */ { PCI_DEVICE(0x8086, 0x9d71), - .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE | - AZX_DCAPS_INTEL_DSP_DETECTION(KBL) - }, + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE }, /* Kabylake-H */ { PCI_DEVICE(0x8086, 0xa2f0), .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE }, /* Coffelake */ { PCI_DEVICE(0x8086, 0xa348), - .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE | - AZX_DCAPS_INTEL_DSP_DETECTION(CFL) - }, + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, /* Cannonlake */ { PCI_DEVICE(0x8086, 0x9dc8), - .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE | - AZX_DCAPS_INTEL_DSP_DETECTION(CNL) - }, + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, /* Icelake */ { PCI_DEVICE(0x8086, 0x34c8), - .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE | - AZX_DCAPS_INTEL_DSP_DETECTION(ICL) - }, + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, /* Broxton-P(Apollolake) */ { PCI_DEVICE(0x8086, 0x5a98), - .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_BROXTON | - AZX_DCAPS_INTEL_DSP_DETECTION(APL) - }, + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_BROXTON }, /* Broxton-T */ { PCI_DEVICE(0x8086, 0x1a98), .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_BROXTON }, /* Gemini-Lake */ { PCI_DEVICE(0x8086, 0x3198), - .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_BROXTON | - AZX_DCAPS_INTEL_DSP_DETECTION(GLK) - }, + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_BROXTON }, /* Haswell */ { PCI_DEVICE(0x8086, 0x0a0c), .driver_data = AZX_DRIVER_HDMI | AZX_DCAPS_INTEL_HASWELL }, diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index 2fd1b61e8331..99a62ba409df 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -188,12 +188,6 @@ config SND_SOC_INTEL_SKYLAKE_COMMON select SND_SOC_TOPOLOGY select SND_SOC_INTEL_SST select SND_SOC_HDAC_HDA if SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC - select SND_HDA_INTEL_DSP_DETECTION_SKL if SND_SOC_INTEL_SKL - select SND_HDA_INTEL_DSP_DETECTION_APL if SND_SOC_INTEL_APL - select SND_HDA_INTEL_DSP_DETECTION_KBL if SND_SOC_INTEL_KBL - select SND_HDA_INTEL_DSP_DETECTION_GLK if SND_SOC_INTEL_GLK - select SND_HDA_INTEL_DSP_DETECTION_CNL if SND_SOC_INTEL_CNL - select SND_HDA_INTEL_DSP_DETECTION_CFL if SND_SOC_INTEL_CFL select SND_SOC_ACPI_INTEL_MATCH help If you have a Intel Skylake/Broxton/ApolloLake/KabyLake/ -- cgit v1.2.1