From c656941df9bc80f7ec65b92ca73c42f8b0b62628 Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Sun, 8 Apr 2018 16:57:35 -0700 Subject: ASoC: fsl_esai: Fix divisor calculation failure at lower ratio When the desired ratio is less than 256, the savesub (tolerance) in the calculation would become 0. This will then fail the loop- search immediately without reporting any errors. But if the ratio is smaller enough, there is no need to calculate the tolerance because PM divisor alone is enough to get the ratio. So a simple fix could be just to set PM directly instead of going into the loop-search. Reported-by: Marek Vasut Signed-off-by: Nicolin Chen Tested-by: Marek Vasut Reviewed-by: Fabio Estevam Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/fsl/fsl_esai.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'sound/soc/fsl') diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c index 40a700493f4c..da8fd98c7f51 100644 --- a/sound/soc/fsl/fsl_esai.c +++ b/sound/soc/fsl/fsl_esai.c @@ -144,6 +144,13 @@ static int fsl_esai_divisor_cal(struct snd_soc_dai *dai, bool tx, u32 ratio, psr = ratio <= 256 * maxfp ? ESAI_xCCR_xPSR_BYPASS : ESAI_xCCR_xPSR_DIV8; + /* Do not loop-search if PM (1 ~ 256) alone can serve the ratio */ + if (ratio <= 256) { + pm = ratio; + fp = 1; + goto out; + } + /* Set the max fluctuation -- 0.1% of the max devisor */ savesub = (psr ? 1 : 8) * 256 * maxfp / 1000; -- cgit v1.2.1 From fac8a5a5ea40b03dcbb0f46977094099ba2220b8 Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Sat, 7 Apr 2018 21:40:21 -0700 Subject: ASoC: fsl_ssi: Fix mode setting when changing channel number MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is a partial revert (in a cleaner way) of commit ebf08ae3bc90 ("ASoC: fsl_ssi: Keep ssi->i2s_net updated") to fix a regression at test cases when switching between mono and stereo audio. The problem is that ssi->i2s_net is initialized in set_dai_fmt() only, while this set_dai_fmt() is only called during the dai-link probe(). The original patch assumed set_dai_fmt() would be called during every playback instance, so it failed at the overriding use cases. This patch adds the local variable i2s_net back to let regular use cases still follow the mode settings from the set_dai_fmt(). Meanwhile, the original commit of keeping ssi->i2s_net updated was to make set_tdm_slot() clean by checking the ssi->i2s_net directly instead of reading SCR register. However, the change itself is not necessary (or even harmful) because the set_tdm_slot() might fail to check the slot number for Normal-Mode-None-Net settings while mono audio cases still need 2 slots. So this patch can also fix it. And it adds an extra line of comments to declare ssi->i2s_net does not reflect the register value but merely the initial setting from the set_dai_fmt(). Reported-by: Mika Penttilä Signed-off-by: Nicolin Chen Tested-by: Mika Penttilä Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_ssi.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'sound/soc/fsl') diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 0823b08923b5..89df2d9f63d7 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -217,6 +217,7 @@ struct fsl_ssi_soc_data { * @dai_fmt: DAI configuration this device is currently used with * @streams: Mask of current active streams: BIT(TX) and BIT(RX) * @i2s_net: I2S and Network mode configurations of SCR register + * (this is the initial settings based on the DAI format) * @synchronous: Use synchronous mode - both of TX and RX use STCK and SFCK * @use_dma: DMA is used or FIQ with stream filter * @use_dual_fifo: DMA with support for dual FIFO mode @@ -829,16 +830,23 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream, } if (!fsl_ssi_is_ac97(ssi)) { + /* + * Keep the ssi->i2s_net intact while having a local variable + * to override settings for special use cases. Otherwise, the + * ssi->i2s_net will lose the settings for regular use cases. + */ + u8 i2s_net = ssi->i2s_net; + /* Normal + Network mode to send 16-bit data in 32-bit frames */ if (fsl_ssi_is_i2s_cbm_cfs(ssi) && sample_size == 16) - ssi->i2s_net = SSI_SCR_I2S_MODE_NORMAL | SSI_SCR_NET; + i2s_net = SSI_SCR_I2S_MODE_NORMAL | SSI_SCR_NET; /* Use Normal mode to send mono data at 1st slot of 2 slots */ if (channels == 1) - ssi->i2s_net = SSI_SCR_I2S_MODE_NORMAL; + i2s_net = SSI_SCR_I2S_MODE_NORMAL; regmap_update_bits(regs, REG_SSI_SCR, - SSI_SCR_I2S_NET_MASK, ssi->i2s_net); + SSI_SCR_I2S_NET_MASK, i2s_net); } /* In synchronous mode, the SSI uses STCCR for capture */ -- cgit v1.2.1