From c5489f9fc053c744c609f34b32efca395cc2fdad Mon Sep 17 00:00:00 2001 From: Michal Oleszczyk Date: Fri, 2 Feb 2018 13:10:29 +0100 Subject: sgtl5000: change digital_mute policy Current implementation mute codec in global way (DAC block). That means when user routes sound not from I2S but from AUX source (LINE_IN) it also will be muted by alsa core. This should not happen. Signed-off-by: Michal Oleszczyk Signed-off-by: Mark Brown --- sound/soc/codecs/sgtl5000.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'sound/soc/codecs/sgtl5000.c') diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index e1ab5537d27a..c445a0794a27 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -529,10 +529,15 @@ static const struct snd_kcontrol_new sgtl5000_snd_controls[] = { static int sgtl5000_digital_mute(struct snd_soc_dai *codec_dai, int mute) { struct snd_soc_codec *codec = codec_dai->codec; - u16 adcdac_ctrl = SGTL5000_DAC_MUTE_LEFT | SGTL5000_DAC_MUTE_RIGHT; + u16 i2s_pwr = SGTL5000_I2S_IN_POWERUP; - snd_soc_update_bits(codec, SGTL5000_CHIP_ADCDAC_CTRL, - adcdac_ctrl, mute ? adcdac_ctrl : 0); + /* + * During 'digital mute' do not mute DAC + * because LINE_IN would be muted aswell. We want to mute + * only I2S block - this can be done by powering it off + */ + snd_soc_update_bits(codec, SGTL5000_CHIP_DIG_POWER, + i2s_pwr, mute ? 0 : i2s_pwr); return 0; } @@ -1237,6 +1242,10 @@ static int sgtl5000_probe(struct snd_soc_codec *codec) */ snd_soc_write(codec, SGTL5000_DAP_CTRL, 0); + /* Unmute DAC after start */ + snd_soc_update_bits(codec, SGTL5000_CHIP_ADCDAC_CTRL, + SGTL5000_DAC_MUTE_LEFT | SGTL5000_DAC_MUTE_RIGHT, 0); + return 0; err: -- cgit v1.2.1 From a8992973edbb2555e956b90f6fe97c4bc14d761d Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 16 Feb 2018 11:58:54 -0200 Subject: ASoC: sgtl5000: Fix suspend/resume Commit 8419caa72702 ("ASoC: sgtl5000: Do not disable regulators in SND_SOC_BIAS_OFF") causes the sgtl5000 to fail after a suspend/resume sequence: Playing WAVE '/media/a2002011001-e02.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo aplay: pcm_write:2051: write error: Input/output error The problem is caused by the fact that the aforementioned commit dropped the cache handling, so re-introduce the register map resync to fix the problem. Suggested-by: Mark Brown Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown Cc: --- sound/soc/codecs/sgtl5000.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'sound/soc/codecs/sgtl5000.c') diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index c445a0794a27..c5c76ab8ccf1 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -876,15 +876,26 @@ static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream, static int sgtl5000_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { + struct sgtl5000_priv *sgtl = snd_soc_codec_get_drvdata(codec); + int ret; + switch (level) { case SND_SOC_BIAS_ON: case SND_SOC_BIAS_PREPARE: case SND_SOC_BIAS_STANDBY: + regcache_cache_only(sgtl->regmap, false); + ret = regcache_sync(sgtl->regmap); + if (ret) { + regcache_cache_only(sgtl->regmap, true); + return ret; + } + snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, SGTL5000_REFTOP_POWERUP, SGTL5000_REFTOP_POWERUP); break; case SND_SOC_BIAS_OFF: + regcache_cache_only(sgtl->regmap, true); snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, SGTL5000_REFTOP_POWERUP, 0); break; -- cgit v1.2.1