From 8b83afe0d21f07145ec34ac006656e4d3edc4bac Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 3 Jun 2008 20:52:10 +0300 Subject: [ALSA] maestro3: Fix hw volume on HP OmniBook Make the hw volume buttons work correctly on some HP OmniBook laptops. The original quirk was apparently applied a bit too early and it was also lacking some critial register writes. This improved sequence was discovered by trial and error (like the original sequence). Tested and found working on OB500 and OB6000 laptops. Signed-off-by: Ville Syrjala Signed-off-by: Takashi Iwai --- sound/pci/maestro3.c | 42 +++++++++++++++++++++++++++--------------- 1 file changed, 27 insertions(+), 15 deletions(-) (limited to 'sound/pci/maestro3.c') diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c index a536c59fbea1..f4788dee05c3 100644 --- a/sound/pci/maestro3.c +++ b/sound/pci/maestro3.c @@ -2427,6 +2427,29 @@ snd_m3_amp_enable(struct snd_m3 *chip, int enable) outw(0xffff, io + GPIO_MASK); } +static void +snd_m3_hv_init(struct snd_m3 *chip) +{ + unsigned long io = chip->iobase; + u16 val = GPI_VOL_DOWN | GPI_VOL_UP; + + if (!chip->is_omnibook) + return; + + /* + * Volume buttons on some HP OmniBook laptops + * require some GPIO magic to work correctly. + */ + outw(0xffff, io + GPIO_MASK); + outw(0x0000, io + GPIO_DATA); + + outw(~val, io + GPIO_MASK); + outw(inw(io + GPIO_DIRECTION) & ~val, io + GPIO_DIRECTION); + outw(val, io + GPIO_MASK); + + outw(0xffff, io + GPIO_MASK); +} + static int snd_m3_chip_init(struct snd_m3 *chip) { @@ -2442,21 +2465,6 @@ snd_m3_chip_init(struct snd_m3 *chip) DISABLE_LEGACY); pci_write_config_word(pcidev, PCI_LEGACY_AUDIO_CTRL, w); - if (chip->is_omnibook) { - /* - * Volume buttons on some HP OmniBook laptops don't work - * correctly. This makes them work for the most part. - * - * Volume up and down buttons on the laptop side work. - * Fn+cursor_up (volme up) works. - * Fn+cursor_down (volume down) doesn't work. - * Fn+F7 (mute) works acts as volume up. - */ - outw(~(GPI_VOL_DOWN|GPI_VOL_UP), io + GPIO_MASK); - outw(inw(io + GPIO_DIRECTION) & ~(GPI_VOL_DOWN|GPI_VOL_UP), io + GPIO_DIRECTION); - outw((GPI_VOL_DOWN|GPI_VOL_UP), io + GPIO_DATA); - outw(0xffff, io + GPIO_MASK); - } pci_read_config_dword(pcidev, PCI_ALLEGRO_CONFIG, &n); n &= ~(HV_CTRL_ENABLE | REDUCED_DEBOUNCE | HV_BUTTON_FROM_GD); n |= chip->hv_config; @@ -2642,6 +2650,8 @@ static int m3_resume(struct pci_dev *pci) snd_m3_enable_ints(chip); snd_m3_amp_enable(chip, 1); + snd_m3_hv_init(chip); + snd_power_change_state(card, SNDRV_CTL_POWER_D0); return 0; } @@ -2781,6 +2791,8 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci, snd_m3_amp_enable(chip, 1); + snd_m3_hv_init(chip); + tasklet_init(&chip->hwvol_tq, snd_m3_update_hw_volume, (unsigned long)chip); if (request_irq(pci->irq, snd_m3_interrupt, IRQF_SHARED, -- cgit v1.2.1