From 862c2c0a61c515f2e9f63f689215bcf99a607eaf Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Sat, 12 Jul 2008 22:43:50 +0200 Subject: ALSA: ALSA driver for SGI O2 audio board This patch adds a new ALSA driver for the audio device found inside most of the SGI O2 workstation. The hardware uses a SGI custom chip, which feeds a AD codec chip. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/mips/ad1843.c | 561 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 561 insertions(+) create mode 100644 sound/mips/ad1843.c (limited to 'sound/mips/ad1843.c') diff --git a/sound/mips/ad1843.c b/sound/mips/ad1843.c new file mode 100644 index 000000000000..c624510ec374 --- /dev/null +++ b/sound/mips/ad1843.c @@ -0,0 +1,561 @@ +/* + * AD1843 low level driver + * + * Copyright 2003 Vivien Chappelier + * Copyright 2008 Thomas Bogendoerfer + * + * inspired from vwsnd.c (SGI VW audio driver) + * Copyright 1999 Silicon Graphics, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include + +/* + * AD1843 bitfield definitions. All are named as in the AD1843 data + * sheet, with ad1843_ prepended and individual bit numbers removed. + * + * E.g., bits LSS0 through LSS2 become ad1843_LSS. + * + * Only the bitfields we need are defined. + */ + +struct ad1843_bitfield { + char reg; + char lo_bit; + char nbits; +}; + +static const struct ad1843_bitfield + ad1843_PDNO = { 0, 14, 1 }, /* Converter Power-Down Flag */ + ad1843_INIT = { 0, 15, 1 }, /* Clock Initialization Flag */ + ad1843_RIG = { 2, 0, 4 }, /* Right ADC Input Gain */ + ad1843_RMGE = { 2, 4, 1 }, /* Right ADC Mic Gain Enable */ + ad1843_RSS = { 2, 5, 3 }, /* Right ADC Source Select */ + ad1843_LIG = { 2, 8, 4 }, /* Left ADC Input Gain */ + ad1843_LMGE = { 2, 12, 1 }, /* Left ADC Mic Gain Enable */ + ad1843_LSS = { 2, 13, 3 }, /* Left ADC Source Select */ + ad1843_RD2M = { 3, 0, 5 }, /* Right DAC 2 Mix Gain/Atten */ + ad1843_RD2MM = { 3, 7, 1 }, /* Right DAC 2 Mix Mute */ + ad1843_LD2M = { 3, 8, 5 }, /* Left DAC 2 Mix Gain/Atten */ + ad1843_LD2MM = { 3, 15, 1 }, /* Left DAC 2 Mix Mute */ + ad1843_RX1M = { 4, 0, 5 }, /* Right Aux 1 Mix Gain/Atten */ + ad1843_RX1MM = { 4, 7, 1 }, /* Right Aux 1 Mix Mute */ + ad1843_LX1M = { 4, 8, 5 }, /* Left Aux 1 Mix Gain/Atten */ + ad1843_LX1MM = { 4, 15, 1 }, /* Left Aux 1 Mix Mute */ + ad1843_RX2M = { 5, 0, 5 }, /* Right Aux 2 Mix Gain/Atten */ + ad1843_RX2MM = { 5, 7, 1 }, /* Right Aux 2 Mix Mute */ + ad1843_LX2M = { 5, 8, 5 }, /* Left Aux 2 Mix Gain/Atten */ + ad1843_LX2MM = { 5, 15, 1 }, /* Left Aux 2 Mix Mute */ + ad1843_RMCM = { 7, 0, 5 }, /* Right Mic Mix Gain/Atten */ + ad1843_RMCMM = { 7, 7, 1 }, /* Right Mic Mix Mute */ + ad1843_LMCM = { 7, 8, 5 }, /* Left Mic Mix Gain/Atten */ + ad1843_LMCMM = { 7, 15, 1 }, /* Left Mic Mix Mute */ + ad1843_HPOS = { 8, 4, 1 }, /* Headphone Output Voltage Swing */ + ad1843_HPOM = { 8, 5, 1 }, /* Headphone Output Mute */ + ad1843_MPOM = { 8, 6, 1 }, /* Mono Output Mute */ + ad1843_RDA1G = { 9, 0, 6 }, /* Right DAC1 Analog/Digital Gain */ + ad1843_RDA1GM = { 9, 7, 1 }, /* Right DAC1 Analog Mute */ + ad1843_LDA1G = { 9, 8, 6 }, /* Left DAC1 Analog/Digital Gain */ + ad1843_LDA1GM = { 9, 15, 1 }, /* Left DAC1 Analog Mute */ + ad1843_RDA2G = { 10, 0, 6 }, /* Right DAC2 Analog/Digital Gain */ + ad1843_RDA2GM = { 10, 7, 1 }, /* Right DAC2 Analog Mute */ + ad1843_LDA2G = { 10, 8, 6 }, /* Left DAC2 Analog/Digital Gain */ + ad1843_LDA2GM = { 10, 15, 1 }, /* Left DAC2 Analog Mute */ + ad1843_RDA1AM = { 11, 7, 1 }, /* Right DAC1 Digital Mute */ + ad1843_LDA1AM = { 11, 15, 1 }, /* Left DAC1 Digital Mute */ + ad1843_RDA2AM = { 12, 7, 1 }, /* Right DAC2 Digital Mute */ + ad1843_LDA2AM = { 12, 15, 1 }, /* Left DAC2 Digital Mute */ + ad1843_ADLC = { 15, 0, 2 }, /* ADC Left Sample Rate Source */ + ad1843_ADRC = { 15, 2, 2 }, /* ADC Right Sample Rate Source */ + ad1843_DA1C = { 15, 8, 2 }, /* DAC1 Sample Rate Source */ + ad1843_DA2C = { 15, 10, 2 }, /* DAC2 Sample Rate Source */ + ad1843_C1C = { 17, 0, 16 }, /* Clock 1 Sample Rate Select */ + ad1843_C2C = { 20, 0, 16 }, /* Clock 2 Sample Rate Select */ + ad1843_C3C = { 23, 0, 16 }, /* Clock 3 Sample Rate Select */ + ad1843_DAADL = { 25, 4, 2 }, /* Digital ADC Left Source Select */ + ad1843_DAADR = { 25, 6, 2 }, /* Digital ADC Right Source Select */ + ad1843_DAMIX = { 25, 14, 1 }, /* DAC Digital Mix Enable */ + ad1843_DRSFLT = { 25, 15, 1 }, /* Digital Reampler Filter Mode */ + ad1843_ADLF = { 26, 0, 2 }, /* ADC Left Channel Data Format */ + ad1843_ADRF = { 26, 2, 2 }, /* ADC Right Channel Data Format */ + ad1843_ADTLK = { 26, 4, 1 }, /* ADC Transmit Lock Mode Select */ + ad1843_SCF = { 26, 7, 1 }, /* SCLK Frequency Select */ + ad1843_DA1F = { 26, 8, 2 }, /* DAC1 Data Format Select */ + ad1843_DA2F = { 26, 10, 2 }, /* DAC2 Data Format Select */ + ad1843_DA1SM = { 26, 14, 1 }, /* DAC1 Stereo/Mono Mode Select */ + ad1843_DA2SM = { 26, 15, 1 }, /* DAC2 Stereo/Mono Mode Select */ + ad1843_ADLEN = { 27, 0, 1 }, /* ADC Left Channel Enable */ + ad1843_ADREN = { 27, 1, 1 }, /* ADC Right Channel Enable */ + ad1843_AAMEN = { 27, 4, 1 }, /* Analog to Analog Mix Enable */ + ad1843_ANAEN = { 27, 7, 1 }, /* Analog Channel Enable */ + ad1843_DA1EN = { 27, 8, 1 }, /* DAC1 Enable */ + ad1843_DA2EN = { 27, 9, 1 }, /* DAC2 Enable */ + ad1843_DDMEN = { 27, 12, 1 }, /* DAC2 to DAC1 Mix Enable */ + ad1843_C1EN = { 28, 11, 1 }, /* Clock Generator 1 Enable */ + ad1843_C2EN = { 28, 12, 1 }, /* Clock Generator 2 Enable */ + ad1843_C3EN = { 28, 13, 1 }, /* Clock Generator 3 Enable */ + ad1843_PDNI = { 28, 15, 1 }; /* Converter Power Down */ + +/* + * The various registers of the AD1843 use three different formats for + * specifying gain. The ad1843_gain structure parameterizes the + * formats. + */ + +struct ad1843_gain { + int negative; /* nonzero if gain is negative. */ + const struct ad1843_bitfield *lfield; + const struct ad1843_bitfield *rfield; + const struct ad1843_bitfield *lmute; + const struct ad1843_bitfield *rmute; +}; + +static const struct ad1843_gain ad1843_gain_RECLEV = { + .negative = 0, + .lfield = &ad1843_LIG, + .rfield = &ad1843_RIG +}; +static const struct ad1843_gain ad1843_gain_LINE = { + .negative = 1, + .lfield = &ad1843_LX1M, + .rfield = &ad1843_RX1M, + .lmute = &ad1843_LX1MM, + .rmute = &ad1843_RX1MM +}; +static const struct ad1843_gain ad1843_gain_LINE_2 = { + .negative = 1, + .lfield = &ad1843_LDA2G, + .rfield = &ad1843_RDA2G, + .lmute = &ad1843_LDA2GM, + .rmute = &ad1843_RDA2GM +}; +static const struct ad1843_gain ad1843_gain_MIC = { + .negative = 1, + .lfield = &ad1843_LMCM, + .rfield = &ad1843_RMCM, + .lmute = &ad1843_LMCMM, + .rmute = &ad1843_RMCMM +}; +static const struct ad1843_gain ad1843_gain_PCM_0 = { + .negative = 1, + .lfield = &ad1843_LDA1G, + .rfield = &ad1843_RDA1G, + .lmute = &ad1843_LDA1GM, + .rmute = &ad1843_RDA1GM +}; +static const struct ad1843_gain ad1843_gain_PCM_1 = { + .negative = 1, + .lfield = &ad1843_LD2M, + .rfield = &ad1843_RD2M, + .lmute = &ad1843_LD2MM, + .rmute = &ad1843_RD2MM +}; + +static const struct ad1843_gain *ad1843_gain[AD1843_GAIN_SIZE] = +{ + &ad1843_gain_RECLEV, + &ad1843_gain_LINE, + &ad1843_gain_LINE_2, + &ad1843_gain_MIC, + &ad1843_gain_PCM_0, + &ad1843_gain_PCM_1, +}; + +/* read the current value of an AD1843 bitfield. */ + +static int ad1843_read_bits(struct snd_ad1843 *ad1843, + const struct ad1843_bitfield *field) +{ + int w; + + w = ad1843->read(ad1843->chip, field->reg); + return w >> field->lo_bit & ((1 << field->nbits) - 1); +} + +/* + * write a new value to an AD1843 bitfield and return the old value. + */ + +static int ad1843_write_bits(struct snd_ad1843 *ad1843, + const struct ad1843_bitfield *field, + int newval) +{ + int w, mask, oldval, newbits; + + w = ad1843->read(ad1843->chip, field->reg); + mask = ((1 << field->nbits) - 1) << field->lo_bit; + oldval = (w & mask) >> field->lo_bit; + newbits = (newval << field->lo_bit) & mask; + w = (w & ~mask) | newbits; + ad1843->write(ad1843->chip, field->reg, w); + + return oldval; +} + +/* + * ad1843_read_multi reads multiple bitfields from the same AD1843 + * register. It uses a single read cycle to do it. (Reading the + * ad1843 requires 256 bit times at 12.288 MHz, or nearly 20 + * microseconds.) + * + * Called like this. + * + * ad1843_read_multi(ad1843, nfields, + * &ad1843_FIELD1, &val1, + * &ad1843_FIELD2, &val2, ...); + */ + +static void ad1843_read_multi(struct snd_ad1843 *ad1843, int argcount, ...) +{ + va_list ap; + const struct ad1843_bitfield *fp; + int w = 0, mask, *value, reg = -1; + + va_start(ap, argcount); + while (--argcount >= 0) { + fp = va_arg(ap, const struct ad1843_bitfield *); + value = va_arg(ap, int *); + if (reg == -1) { + reg = fp->reg; + w = ad1843->read(ad1843->chip, reg); + } + + mask = (1 << fp->nbits) - 1; + *value = w >> fp->lo_bit & mask; + } + va_end(ap); +} + +/* + * ad1843_write_multi stores multiple bitfields into the same AD1843 + * register. It uses one read and one write cycle to do it. + * + * Called like this. + * + * ad1843_write_multi(ad1843, nfields, + * &ad1843_FIELD1, val1, + * &ad1843_FIELF2, val2, ...); + */ + +static void ad1843_write_multi(struct snd_ad1843 *ad1843, int argcount, ...) +{ + va_list ap; + int reg; + const struct ad1843_bitfield *fp; + int value; + int w, m, mask, bits; + + mask = 0; + bits = 0; + reg = -1; + + va_start(ap, argcount); + while (--argcount >= 0) { + fp = va_arg(ap, const struct ad1843_bitfield *); + value = va_arg(ap, int); + if (reg == -1) + reg = fp->reg; + else + BUG_ON(reg != fp->reg); + m = ((1 << fp->nbits) - 1) << fp->lo_bit; + mask |= m; + bits |= (value << fp->lo_bit) & m; + } + va_end(ap); + + if (~mask & 0xFFFF) + w = ad1843->read(ad1843->chip, reg); + else + w = 0; + w = (w & ~mask) | bits; + ad1843->write(ad1843->chip, reg, w); +} + +int ad1843_get_gain_max(struct snd_ad1843 *ad1843, int id) +{ + const struct ad1843_gain *gp = ad1843_gain[id]; + int ret; + + ret = (1 << gp->lfield->nbits); + if (!gp->lmute) + ret -= 1; + return ret; +} + +/* + * ad1843_get_gain reads the specified register and extracts the gain value + * using the supplied gain type. + */ + +int ad1843_get_gain(struct snd_ad1843 *ad1843, int id) +{ + int lg, rg, lm, rm; + const struct ad1843_gain *gp = ad1843_gain[id]; + unsigned short mask = (1 << gp->lfield->nbits) - 1; + + ad1843_read_multi(ad1843, 2, gp->lfield, &lg, gp->rfield, &rg); + if (gp->negative) { + lg = mask - lg; + rg = mask - rg; + } + if (gp->lmute) { + ad1843_read_multi(ad1843, 2, gp->lmute, &lm, gp->rmute, &rm); + if (lm) + lg = 0; + if (rm) + rg = 0; + } + return lg << 0 | rg << 8; +} + +/* + * Set an audio channel's gain. + * + * Returns the new gain, which may be lower than the old gain. + */ + +int ad1843_set_gain(struct snd_ad1843 *ad1843, int id, int newval) +{ + const struct ad1843_gain *gp = ad1843_gain[id]; + unsigned short mask = (1 << gp->lfield->nbits) - 1; + + int lg = (newval >> 0) & mask; + int rg = (newval >> 8) & mask; + int lm = (lg == 0) ? 1 : 0; + int rm = (rg == 0) ? 1 : 0; + + if (gp->negative) { + lg = mask - lg; + rg = mask - rg; + } + if (gp->lmute) + ad1843_write_multi(ad1843, 2, gp->lmute, lm, gp->rmute, rm); + ad1843_write_multi(ad1843, 2, gp->lfield, lg, gp->rfield, rg); + return ad1843_get_gain(ad1843, id); +} + +/* Returns the current recording source */ + +int ad1843_get_recsrc(struct snd_ad1843 *ad1843) +{ + int val = ad1843_read_bits(ad1843, &ad1843_LSS); + + if (val < 0 || val > 2) { + val = 2; + ad1843_write_multi(ad1843, 2, + &ad1843_LSS, val, &ad1843_RSS, val); + } + return val; +} + +/* + * Set recording source. + * + * Returns newsrc on success, -errno on failure. + */ + +int ad1843_set_recsrc(struct snd_ad1843 *ad1843, int newsrc) +{ + if (newsrc < 0 || newsrc > 2) + return -EINVAL; + + ad1843_write_multi(ad1843, 2, &ad1843_LSS, newsrc, &ad1843_RSS, newsrc); + return newsrc; +} + +/* Setup ad1843 for D/A conversion. */ + +void ad1843_setup_dac(struct snd_ad1843 *ad1843, + unsigned int id, + unsigned int framerate, + snd_pcm_format_t fmt, + unsigned int channels) +{ + int ad_fmt = 0, ad_mode = 0; + + switch (fmt) { + case SNDRV_PCM_FORMAT_S8: + ad_fmt = 0; + break; + case SNDRV_PCM_FORMAT_U8: + ad_fmt = 0; + break; + case SNDRV_PCM_FORMAT_S16_LE: + ad_fmt = 1; + break; + case SNDRV_PCM_FORMAT_MU_LAW: + ad_fmt = 2; + break; + case SNDRV_PCM_FORMAT_A_LAW: + ad_fmt = 3; + break; + default: + break; + } + + switch (channels) { + case 2: + ad_mode = 0; + break; + case 1: + ad_mode = 1; + break; + default: + break; + } + + if (id) { + ad1843_write_bits(ad1843, &ad1843_C2C, framerate); + ad1843_write_multi(ad1843, 2, + &ad1843_DA2SM, ad_mode, + &ad1843_DA2F, ad_fmt); + } else { + ad1843_write_bits(ad1843, &ad1843_C1C, framerate); + ad1843_write_multi(ad1843, 2, + &ad1843_DA1SM, ad_mode, + &ad1843_DA1F, ad_fmt); + } +} + +void ad1843_shutdown_dac(struct snd_ad1843 *ad1843, unsigned int id) +{ + if (id) + ad1843_write_bits(ad1843, &ad1843_DA2F, 1); + else + ad1843_write_bits(ad1843, &ad1843_DA1F, 1); +} + +void ad1843_setup_adc(struct snd_ad1843 *ad1843, + unsigned int framerate, + snd_pcm_format_t fmt, + unsigned int channels) +{ + int da_fmt = 0; + + switch (fmt) { + case SNDRV_PCM_FORMAT_S8: da_fmt = 0; break; + case SNDRV_PCM_FORMAT_U8: da_fmt = 0; break; + case SNDRV_PCM_FORMAT_S16_LE: da_fmt = 1; break; + case SNDRV_PCM_FORMAT_MU_LAW: da_fmt = 2; break; + case SNDRV_PCM_FORMAT_A_LAW: da_fmt = 3; break; + default: break; + } + + ad1843_write_bits(ad1843, &ad1843_C3C, framerate); + ad1843_write_multi(ad1843, 2, + &ad1843_ADLF, da_fmt, &ad1843_ADRF, da_fmt); +} + +void ad1843_shutdown_adc(struct snd_ad1843 *ad1843) +{ + /* nothing to do */ +} + +/* + * Fully initialize the ad1843. As described in the AD1843 data + * sheet, section "START-UP SEQUENCE". The numbered comments are + * subsection headings from the data sheet. See the data sheet, pages + * 52-54, for more info. + * + * return 0 on success, -errno on failure. */ + +int ad1843_init(struct snd_ad1843 *ad1843) +{ + unsigned long later; + + if (ad1843_read_bits(ad1843, &ad1843_INIT) != 0) { + printk(KERN_ERR "ad1843: AD1843 won't initialize\n"); + return -EIO; + } + + ad1843_write_bits(ad1843, &ad1843_SCF, 1); + + /* 4. Put the conversion resources into standby. */ + ad1843_write_bits(ad1843, &ad1843_PDNI, 0); + later = jiffies + msecs_to_jiffies(500); + + while (ad1843_read_bits(ad1843, &ad1843_PDNO)) { + if (time_after(jiffies, later)) { + printk(KERN_ERR + "ad1843: AD1843 won't power up\n"); + return -EIO; + } + schedule_timeout_interruptible(5); + } + + /* 5. Power up the clock generators and enable clock output pins. */ + ad1843_write_multi(ad1843, 3, + &ad1843_C1EN, 1, + &ad1843_C2EN, 1, + &ad1843_C3EN, 1); + + /* 6. Configure conversion resources while they are in standby. */ + + /* DAC1/2 use clock 1/2 as source, ADC uses clock 3. Always. */ + ad1843_write_multi(ad1843, 4, + &ad1843_DA1C, 1, + &ad1843_DA2C, 2, + &ad1843_ADLC, 3, + &ad1843_ADRC, 3); + + /* 7. Enable conversion resources. */ + ad1843_write_bits(ad1843, &ad1843_ADTLK, 1); + ad1843_write_multi(ad1843, 7, + &ad1843_ANAEN, 1, + &ad1843_AAMEN, 1, + &ad1843_DA1EN, 1, + &ad1843_DA2EN, 1, + &ad1843_DDMEN, 1, + &ad1843_ADLEN, 1, + &ad1843_ADREN, 1); + + /* 8. Configure conversion resources while they are enabled. */ + + /* set gain to 0 for all channels */ + ad1843_set_gain(ad1843, AD1843_GAIN_RECLEV, 0); + ad1843_set_gain(ad1843, AD1843_GAIN_LINE, 0); + ad1843_set_gain(ad1843, AD1843_GAIN_LINE_2, 0); + ad1843_set_gain(ad1843, AD1843_GAIN_MIC, 0); + ad1843_set_gain(ad1843, AD1843_GAIN_PCM_0, 0); + ad1843_set_gain(ad1843, AD1843_GAIN_PCM_1, 0); + + /* Unmute all channels. */ + /* DAC1 */ + ad1843_write_multi(ad1843, 2, &ad1843_LDA1GM, 0, &ad1843_RDA1GM, 0); + /* DAC2 */ + ad1843_write_multi(ad1843, 2, &ad1843_LDA2GM, 0, &ad1843_RDA2GM, 0); + + /* Set default recording source to Line In and set + * mic gain to +20 dB. + */ + ad1843_set_recsrc(ad1843, 2); + ad1843_write_multi(ad1843, 2, &ad1843_LMGE, 1, &ad1843_RMGE, 1); + + /* Set Speaker Out level to +/- 4V and unmute it. */ + ad1843_write_multi(ad1843, 3, + &ad1843_HPOS, 1, + &ad1843_HPOM, 0, + &ad1843_MPOM, 0); + + return 0; +} -- cgit v1.2.1