From d24deb2580823ab0b8425790c6f5d18e2ff749d8 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Fri, 4 Dec 2009 23:46:54 +0100 Subject: mac80211: Add define for TX headroom reserved by mac80211 itself. Add a definition of the amount of TX headroom reserved by mac80211 itself for its own purposes. Also add BUILD_BUG_ON to validate the value. This define can then be used by drivers to request additional TX headroom in the most efficient manner. Signed-off-by: Gertjan van Wingerde Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'net/mac80211') diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 8116d1a96a4a..0d2d94881f1f 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -515,6 +515,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) * and we need some headroom for passing the frame to monitor * interfaces, but never both at the same time. */ + BUILD_BUG_ON(IEEE80211_TX_STATUS_HEADROOM != + sizeof(struct ieee80211_tx_status_rtap_hdr)); local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom, sizeof(struct ieee80211_tx_status_rtap_hdr)); -- cgit v1.2.1 From 9a418af5df03ad133cd8c8f6742b75e542db6392 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 17 Dec 2009 13:55:48 +0100 Subject: mac80211: fix peer HT capabilities I noticed yesterday, because Jeff had noticed a speed regression, cf. bug http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2138 that the SM PS settings for peers were wrong. Instead of overwriting the SM PS settings with the local bits, we need to keep the remote bits. The bug was part of the original HT code from over two years ago, but unfortunately nobody noticed that it makes no sense -- we shouldn't be overwriting the peer's setting with our own but rather keep it intact when masking the peer capabilities with our own. While fixing that, I noticed that the masking of capabilities is completely useless for most of the bits, so also fix those other bits. Finally, I also noticed that PSMP_SUPPORT no longer exists in the final 802.11n version, so also remove that. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ht.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 3787455fb696..d7dcee680728 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -34,9 +34,28 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband, ht_cap->ht_supported = true; - ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) & sband->ht_cap.cap; - ht_cap->cap &= ~IEEE80211_HT_CAP_SM_PS; - ht_cap->cap |= sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS; + /* + * The bits listed in this expression should be + * the same for the peer and us, if the station + * advertises more then we can't use those thus + * we mask them out. + */ + ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) & + (sband->ht_cap.cap | + ~(IEEE80211_HT_CAP_LDPC_CODING | + IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_GRN_FLD | + IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_DSSSCCK40)); + /* + * The STBC bits are asymmetric -- if we don't have + * TX then mask out the peer's RX and vice versa. + */ + if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_TX_STBC)) + ht_cap->cap &= ~IEEE80211_HT_CAP_RX_STBC; + if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC)) + ht_cap->cap &= ~IEEE80211_HT_CAP_TX_STBC; ampdu_info = ht_cap_ie->ampdu_params_info; ht_cap->ampdu_factor = -- cgit v1.2.1 From 0183826b58a2712ffe608bc3302447be3e6a3ab8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 17 Dec 2009 16:16:53 +0100 Subject: mac80211: fix WMM AP settings application My commit 77fdaa12cea26c204cc12c312fe40bc0f3dcdfd8 Author: Johannes Berg Date: Tue Jul 7 03:45:17 2009 +0200 mac80211: rework MLME for multiple authentications inadvertedly broke WMM because it removed, along with a bunch of other now useless initialisations, the line initialising sdata->u.mgd.wmm_last_param_set to -1 which would make it adopt any WMM parameter set. If, as is usually the case, the AP uses WMM parameter set sequence number zero, we'd never update it until the AP changes the sequence number. Add the missing initialisation back to get the WMM settings from the AP applied locally. Signed-off-by: Johannes Berg Cc: stable@kernel.org [2.6.31+] Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d8d50fb5e823..c79e59f82fd9 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -915,6 +915,14 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL | IEEE80211_STA_BEACON_POLL); + /* + * Always handle WMM once after association regardless + * of the first value the AP uses. Setting -1 here has + * that effect because the AP values is an unsigned + * 4-bit value. + */ + sdata->u.mgd.wmm_last_param_set = -1; + ieee80211_led_assoc(local, 1); sdata->vif.bss_conf.assoc = 1; -- cgit v1.2.1