From 4098dce5be537a157eed4a326efd464109825b8b Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Mon, 8 Dec 2008 01:18:37 -0800 Subject: dccp: Remove manual influence on NDP Count feature Updating the NDP count feature is handled automatically now: * for CCID-2 it is disabled, since the code does not use NDP counts; * for CCID-3 it is enabled, as NDP counts are used to determine loss lengths. Allowing the user to change NDP values leads to unpredictable and failing behaviour, since it is then possible to disable NDP counts even when they are needed (e.g. in CCID-3). This means that only those user settings are sensible that agree with the values for Send NDP Count implied by the choice of CCID. But those settings are already activated by the feature negotiation (CCID dependency tracking), hence this form of support is redundant. At startup the initialisation of the NDP count feature uses the default value of 0, which is done implicitly by the zeroing-out of the socket when it is allocated. If the choice of CCID or feature negotiation enables NDP count, this will then be updated via the NDP activation handler. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald Signed-off-by: David S. Miller --- net/dccp/dccp.h | 1 - 1 file changed, 1 deletion(-) (limited to 'net/dccp/dccp.h') diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h index 94f6785f81ec..e0759d098b9a 100644 --- a/net/dccp/dccp.h +++ b/net/dccp/dccp.h @@ -99,7 +99,6 @@ extern int sysctl_dccp_feat_sequence_window; extern int sysctl_dccp_feat_rx_ccid; extern int sysctl_dccp_feat_tx_ccid; extern int sysctl_dccp_feat_send_ack_vector; -extern int sysctl_dccp_feat_send_ndp_count; extern int sysctl_dccp_tx_qlen; extern int sysctl_dccp_sync_ratelimit; -- cgit v1.2.1