From 4f167fb491725ca0be9df0d76b4b2dd862cdfe0b Mon Sep 17 00:00:00 2001 From: "Zhang, Yanmin" Date: Mon, 16 May 2005 21:53:43 -0700 Subject: [PATCH] spurious interrupt fix On my IA64 machine, after kernel 2.6.12-rc3 boots, an edge-triggered interrupt (IRQ 46) keeps triggered over and over again. There is no IRQ 46 interrupt action handler. It has lots of impact on performance. Kernel 2.6.10 and its prior versions have no the problem. Basically, kernel 2.6.10 will mask the spurious edge interrupt if the interrupt is triggered for the second time and its status includes IRQ_DISABLE|IRQ_PENDING. Originally, IA64 kernel has its own specific _irq_desc definitions in file arch/ia64/kernel/irq.c. The definition initiates _irq_desc[irq].status to IRQ_DISABLE. Since kernel 2.6.11, it was moved to architecture independent codes, i.e. kernel/irq/handle.c, but kernel/irq/handle.c initiates _irq_desc[irq].status to 0 instead of IRQ_DISABLE. Signed-off-by: Zhang Yanmin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/irq/handle.c | 1 + 1 file changed, 1 insertion(+) (limited to 'kernel') diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c index 2fb0e46e11f3..06b5a6323998 100644 --- a/kernel/irq/handle.c +++ b/kernel/irq/handle.c @@ -30,6 +30,7 @@ */ irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = { [0 ... NR_IRQS-1] = { + .status = IRQ_DISABLED, .handler = &no_irq_type, .lock = SPIN_LOCK_UNLOCKED } -- cgit v1.2.1 From 3c0547ba8b3bbd8b26ae35e33ac17ff51f67f78c Mon Sep 17 00:00:00 2001 From: Matt Mackall Date: Mon, 16 May 2005 21:53:47 -0700 Subject: [PATCH] add_preferred_console() build fix Move add_preferred_console out of CONFIG_PRINTK so serial console does the right thing. Signed-off-by: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/printk.c | 72 ++++++++++++++++++++++++++++----------------------------- 1 file changed, 36 insertions(+), 36 deletions(-) (limited to 'kernel') diff --git a/kernel/printk.c b/kernel/printk.c index 290a07ce2c8a..01b58d7d17ff 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -160,42 +160,6 @@ static int __init console_setup(char *str) __setup("console=", console_setup); -/** - * add_preferred_console - add a device to the list of preferred consoles. - * - * The last preferred console added will be used for kernel messages - * and stdin/out/err for init. Normally this is used by console_setup - * above to handle user-supplied console arguments; however it can also - * be used by arch-specific code either to override the user or more - * commonly to provide a default console (ie from PROM variables) when - * the user has not supplied one. - */ -int __init add_preferred_console(char *name, int idx, char *options) -{ - struct console_cmdline *c; - int i; - - /* - * See if this tty is not yet registered, and - * if we have a slot free. - */ - for(i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; i++) - if (strcmp(console_cmdline[i].name, name) == 0 && - console_cmdline[i].index == idx) { - selected_console = i; - return 0; - } - if (i == MAX_CMDLINECONSOLES) - return -E2BIG; - selected_console = i; - c = &console_cmdline[i]; - memcpy(c->name, name, sizeof(c->name)); - c->name[sizeof(c->name) - 1] = 0; - c->options = options; - c->index = idx; - return 0; -} - static int __init log_buf_len_setup(char *str) { unsigned long size = memparse(str, &str); @@ -670,6 +634,42 @@ static void call_console_drivers(unsigned long start, unsigned long end) {} #endif +/** + * add_preferred_console - add a device to the list of preferred consoles. + * + * The last preferred console added will be used for kernel messages + * and stdin/out/err for init. Normally this is used by console_setup + * above to handle user-supplied console arguments; however it can also + * be used by arch-specific code either to override the user or more + * commonly to provide a default console (ie from PROM variables) when + * the user has not supplied one. + */ +int __init add_preferred_console(char *name, int idx, char *options) +{ + struct console_cmdline *c; + int i; + + /* + * See if this tty is not yet registered, and + * if we have a slot free. + */ + for(i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; i++) + if (strcmp(console_cmdline[i].name, name) == 0 && + console_cmdline[i].index == idx) { + selected_console = i; + return 0; + } + if (i == MAX_CMDLINECONSOLES) + return -E2BIG; + selected_console = i; + c = &console_cmdline[i]; + memcpy(c->name, name, sizeof(c->name)); + c->name[sizeof(c->name) - 1] = 0; + c->options = options; + c->index = idx; + return 0; +} + /** * acquire_console_sem - lock the console system for exclusive use. * -- cgit v1.2.1 From dfaa9c94b13071c9b5f8578d0ae99acc76c60139 Mon Sep 17 00:00:00 2001 From: William Lee Irwin III Date: Mon, 16 May 2005 21:53:58 -0700 Subject: [PATCH] profile.c: `schedule' parsing fix profile=schedule parsing is not quite what it should be. First, str[7] is 'e', not ',', but then even if it did fall through, prof_on = SCHED_PROFILING would be clobbered inside if (get_option(...)) So a small amount of rearrangement is done in this patch to correct it. Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/profile.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'kernel') diff --git a/kernel/profile.c b/kernel/profile.c index 0221a50ca867..ad8cbb75ffa2 100644 --- a/kernel/profile.c +++ b/kernel/profile.c @@ -49,15 +49,19 @@ static DECLARE_MUTEX(profile_flip_mutex); static int __init profile_setup(char * str) { + static char __initdata schedstr[] = "schedule"; int par; - if (!strncmp(str, "schedule", 8)) { + if (!strncmp(str, schedstr, strlen(schedstr))) { prof_on = SCHED_PROFILING; - printk(KERN_INFO "kernel schedule profiling enabled\n"); - if (str[7] == ',') - str += 8; - } - if (get_option(&str,&par)) { + if (str[strlen(schedstr)] == ',') + str += strlen(schedstr) + 1; + if (get_option(&str, &par)) + prof_shift = par; + printk(KERN_INFO + "kernel schedule profiling enabled (shift: %ld)\n", + prof_shift); + } else if (get_option(&str, &par)) { prof_shift = par; prof_on = CPU_PROFILING; printk(KERN_INFO "kernel profiling enabled (shift: %ld)\n", -- cgit v1.2.1 From 82428b62aa6294ea640c7e920a9224ecaf46db65 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 9 May 2005 08:07:00 -0700 Subject: [PATCH] Driver Core: pm diagnostics update, check for errors This patch includes various tweaks in the messaging that appears during system pm state transitions: * Warn about certain illegal calls in the device tree, like resuming child before parent or suspending parent before child. This could happen easily enough through sysfs, or in some cases when drivers use device_pm_set_parent(). * Be more consistent about dev_dbg() tracing ... do it for resume() and shutdown() too, and never if the driver doesn't have that method. * Say which type of system sleep state is being entered. Except for the warnings, these only affect debug messaging. Signed-off-by: David Brownell Acked-by: Pavel Machek Signed-off-by: Greg Kroah-Hartman --- kernel/power/main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'kernel') diff --git a/kernel/power/main.c b/kernel/power/main.c index 7960ddf04a57..4cdebc972ff2 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -156,14 +156,14 @@ static int enter_state(suspend_state_t state) goto Unlock; } - pr_debug("PM: Preparing system for suspend\n"); + pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]); if ((error = suspend_prepare(state))) goto Unlock; - pr_debug("PM: Entering state.\n"); + pr_debug("PM: Entering %s sleep\n", pm_states[state]); error = suspend_enter(state); - pr_debug("PM: Finishing up.\n"); + pr_debug("PM: Finishing wakeup.\n"); suspend_finish(state); Unlock: up(&pm_sem); -- cgit v1.2.1