From d0087b29f77176480c27c203988b5704847d617c Mon Sep 17 00:00:00 2001 From: Ville Nuorvala Date: Thu, 28 Jun 2012 18:15:52 +0000 Subject: ipv6_tunnel: Allow receiving packets on the fallback tunnel if they pass sanity checks At Facebook, we do Layer-3 DSR via IP-in-IP tunneling. Our load balancers wrap an extra IP header on incoming packets so they can be routed to the backend. In the v4 tunnel driver, when these packets fall on the default tunl0 device, the behavior is to decapsulate them and drop them back on the stack. So our setup is that tunl0 has the VIP and eth0 has (obviously) the backend's real address. In IPv6 we do the same thing, but the v6 tunnel driver didn't have this same behavior - if you didn't have an explicit tunnel setup, it would drop the packet. This patch brings that v4 feature to the v6 driver. The same IPv6 address checks are performed as with any normal tunnel, but as the fallback tunnel endpoint addresses are unspecified, the checks must be performed on a per-packet basis, rather than at tunnel configuration time. [Patch description modified by phil@ipom.com] Signed-off-by: Ville Nuorvala Tested-by: Phil Dibowitz Signed-off-by: David S. Miller --- include/net/ip6_tunnel.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/net/ip6_tunnel.h') diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h index fc73e667b50e..358fb86f57eb 100644 --- a/include/net/ip6_tunnel.h +++ b/include/net/ip6_tunnel.h @@ -9,6 +9,8 @@ #define IP6_TNL_F_CAP_XMIT 0x10000 /* capable of receiving packets */ #define IP6_TNL_F_CAP_RCV 0x20000 +/* determine capability on a per-packet basis */ +#define IP6_TNL_F_CAP_PER_PACKET 0x40000 /* IPv6 tunnel */ -- cgit v1.2.1