From e861b98d5e1be769ca6483b6df97149b956ea834 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Sat, 22 Dec 2007 21:51:30 +0100 Subject: ssb: Fix extraction of values from SPROM This fixes extraction of some values from the SPROM. It mainly fixes extraction of antenna related values, which is needed for another b43 fix sent later. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- include/linux/ssb/ssb.h | 19 +++++++++++++++++-- include/linux/ssb/ssb_regs.h | 38 ++++++++++++++++++++++++-------------- 2 files changed, 41 insertions(+), 16 deletions(-) (limited to 'include/linux/ssb') diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index a21ab29ff363..0eaa98424f0a 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -22,7 +22,12 @@ struct ssb_sprom { u8 et1mac[6]; /* MAC address for 802.11a */ u8 et0phyaddr; /* MII address for enet0 */ u8 et1phyaddr; /* MII address for enet1 */ + u8 et0mdcport; /* MDIO for enet0 */ + u8 et1mdcport; /* MDIO for enet1 */ + u8 board_rev; /* Board revision number from SPROM. */ u8 country_code; /* Country Code */ + u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */ + u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */ u16 pa0b0; u16 pa0b1; u16 pa0b2; @@ -38,8 +43,18 @@ struct ssb_sprom { u8 itssi_a; /* Idle TSSI Target for A-PHY */ u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ u16 boardflags_lo; /* Boardflags (low 16 bits) */ - u8 antenna_gain_a; /* A-PHY Antenna gain (in dBm Q5.2) */ - u8 antenna_gain_bg; /* B/G-PHY Antenna gain (in dBm Q5.2) */ + + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the + * loss in the connectors is bigger than the gain. */ + struct { + struct { + s8 a0, a1, a2, a3; + } ghz24; /* 2.4GHz band */ + struct { + s8 a0, a1, a2, a3; + } ghz5; /* 5GHz band */ + } antenna_gain; /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */ }; diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index 30222e89ad16..ebad0bac9801 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -193,10 +193,10 @@ #define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */ #define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */ #define SSB_SPROM1_BINF_CCODE_SHIFT 8 -#define SSB_SPROM1_BINF_ANTA 0x3000 /* Available A-PHY antennas */ -#define SSB_SPROM1_BINF_ANTA_SHIFT 12 -#define SSB_SPROM1_BINF_ANTBG 0xC000 /* Available B-PHY antennas */ -#define SSB_SPROM1_BINF_ANTBG_SHIFT 14 +#define SSB_SPROM1_BINF_ANTBG 0x3000 /* Available B-PHY and G-PHY antennas */ +#define SSB_SPROM1_BINF_ANTBG_SHIFT 12 +#define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */ +#define SSB_SPROM1_BINF_ANTA_SHIFT 14 #define SSB_SPROM1_PA0B0 0x105E #define SSB_SPROM1_PA0B1 0x1060 #define SSB_SPROM1_PA0B2 0x1062 @@ -221,9 +221,10 @@ #define SSB_SPROM1_ITSSI_A_SHIFT 8 #define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */ #define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */ -#define SSB_SPROM1_AGAIN_A 0x00FF /* A-PHY */ -#define SSB_SPROM1_AGAIN_BG 0xFF00 /* B-PHY and G-PHY */ -#define SSB_SPROM1_AGAIN_BG_SHIFT 8 +#define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */ +#define SSB_SPROM1_AGAIN_BG_SHIFT 0 +#define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ +#define SSB_SPROM1_AGAIN_A_SHIFT 8 /* SPROM Revision 2 (inherits from rev 1) */ #define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */ @@ -264,7 +265,7 @@ #define SSB_SPROM3_CCKPO_11M_SHIFT 12 #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ -/* SPROM Revision 4 entries with ?? in comment are unknown */ +/* SPROM Revision 4 */ #define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */ #define SSB_SPROM4_ET0MAC 0x1018 /* 6 bytes MAC address for Ethernet ?? */ #define SSB_SPROM4_ET1MAC 0x1018 /* 6 bytes MAC address for 802.11a ?? */ @@ -275,13 +276,22 @@ #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ #define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */ -#define SSB_SPROM4_ANT_A 0x105D /* A Antennas */ -#define SSB_SPROM4_ANT_BG 0x105C /* B/G Antennas */ +#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */ +#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ +#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 +#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ +#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 #define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */ -#define SSB_SPROM4_AGAIN 0x105E /* Antenna Gain (in dBm Q5.2) */ -#define SSB_SPROM4_AGAIN_0 0x00FF /* Antenna 0 */ -#define SSB_SPROM4_AGAIN_1 0xFF00 /* Antenna 1 */ -#define SSB_SPROM4_AGAIN_1_SHIFT 8 +#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */ +#define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */ +#define SSB_SPROM4_AGAIN0_SHIFT 0 +#define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */ +#define SSB_SPROM4_AGAIN1_SHIFT 8 +#define SSB_SPROM4_AGAIN23 0x1060 +#define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */ +#define SSB_SPROM4_AGAIN2_SHIFT 0 +#define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */ +#define SSB_SPROM4_AGAIN3_SHIFT 8 #define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */ #define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */ #define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ -- cgit v1.2.1