From d280eadc4fba0bf99fb1c3b60e8c5e007f7da02c Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 6 Jun 2008 17:13:02 +0800 Subject: [NET] smc91x: remove "irq_flags" from "struct smc91x_platdata" IRQ trigger type can be specified in the IRQ resource definition by IORESOURCE_IRQ_*, we need only one way to specify this. This also fixes the following small issue: To allow dynamic support for multiple platforms, when those relevant macros are not defined for one specific platform, the default case will be: - SMC_DYNAMIC_BUS_CONFIG defined - and SMC_IRQ_FLAGS = IRQF_TRIGGER_RISING While if "irq_flags" is missing when defining the smc91x_platdata, usually as follows: static struct smc91x_platdata xxxx_smc91x_data = { .flags = SMC91X_USE_XXBIT, }; The lp->cfg.irq_flags will always be overriden by the above structure (due to a memcpy), thus rendering lp->cfg.irq_flags to be "0" always. (regardless of the default SMC_IRQ_FLAGS or IORESOURCE_IRQ_* flags) Fixes this by forcing to use IORESOURCE_IRQ_* flags if present, and make the only user of smc91x_platdata.irq_flags (renesas/migor) to use IORESOURCE_IRQ_*. Signed-off-by: Eric Miao Acked-by: Nicolas Pitre Acked-by: Jeff Garzik Signed-off-by: Russell King --- include/linux/smc91x.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux/smc91x.h') diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h index 8e0556b8781c..fc7682f04d89 100644 --- a/include/linux/smc91x.h +++ b/include/linux/smc91x.h @@ -7,7 +7,6 @@ struct smc91x_platdata { unsigned long flags; - unsigned long irq_flags; /* IRQF_... */ }; #endif /* __SMC91X_H__ */ -- cgit v1.2.1 From c4f0e76747e80578a8f7fddd82fd0ce8127bd2f8 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Thu, 19 Jun 2008 17:39:03 +0800 Subject: [NET] smc91x: add SMC91X_NOWAIT flag to platform data And also favors the usage of SMC91X_NOWAIT over the hardcoded SMC_NOWAIT by converting "nowait" (module parameter overridable) to platform flag. There are several possibilities: 1. platform data present - preferred and use as is 2. platform data absent - use "nowait", it can be: a. SMC_NOWAIT if defined b. default to 0 if SMC_NOWAIT isn't defined c. overriden by module parameter Signed-off-by: Eric Miao Acked-by: Nicolas Pitre Acked-by: Jeff Garzik Signed-off-by: Russell King --- include/linux/smc91x.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/smc91x.h') diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h index fc7682f04d89..90434db72db2 100644 --- a/include/linux/smc91x.h +++ b/include/linux/smc91x.h @@ -5,6 +5,8 @@ #define SMC91X_USE_16BIT (1 << 1) #define SMC91X_USE_32BIT (1 << 2) +#define SMC91X_NOWAIT (1 << 3) + struct smc91x_platdata { unsigned long flags; }; -- cgit v1.2.1 From 159198862adad7109bb347bb30a620f67beac45f Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 24 Jun 2008 13:38:50 +0800 Subject: [NET] smc91x: prepare for SMC_IO_SHIFT to be a platform configurable variable Now one can use the following code #define SMC_IO_SHIFT lp->io_shift to make SMC_IO_SHIFT a variable. This, however, will slightly increase the CPU overhead and have negative impact on the network performance. The tradeoff is, this can be specified in the smc91x platform data so that multiple boards support can be built in a single zImage. Signed-off-by: Eric Miao Acked-by: Nicolas Pitre Acked-by: Jeff Garzik Signed-off-by: Russell King --- include/linux/smc91x.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux/smc91x.h') diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h index 90434db72db2..0dea9459a8e4 100644 --- a/include/linux/smc91x.h +++ b/include/linux/smc91x.h @@ -7,6 +7,13 @@ #define SMC91X_NOWAIT (1 << 3) +/* two bits for IO_SHIFT, let's hope later designs will keep this sane */ +#define SMC91X_IO_SHIFT_0 (0 << 4) +#define SMC91X_IO_SHIFT_1 (1 << 4) +#define SMC91X_IO_SHIFT_2 (2 << 4) +#define SMC91X_IO_SHIFT_3 (3 << 4) +#define SMC91X_IO_SHIFT(x) (((x) >> 4) & 0x3) + struct smc91x_platdata { unsigned long flags; }; -- cgit v1.2.1 From 52256c0e06e4a4df67134b951a21b50c713a9588 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 24 Jun 2008 15:36:05 +0800 Subject: [NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform data Now that the original SMC_USE_PXA_DMA specific code will always being built if CONFIG_ARCH_PXA is defined, so to make this part of the code to be PXA public, and still prevent it from being built if support of PXA is not selected. A SMC91X_USE_DMA flag is added to the platform data to allow platform to choose its usage of DMA. Note this flag itself is so named to be generic enough (assuming other platforms can also use DMA). It keeps backward compatibility to set the SMC91X_USE_DMA flag if SMC_USE_PXA_DMA is still defined. Signed-off-by: Eric Miao Acked-by: Nicolas Pitre Acked-by: Jeff Garzik Signed-off-by: Russell King --- include/linux/smc91x.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/smc91x.h') diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h index 0dea9459a8e4..3827b922ba1f 100644 --- a/include/linux/smc91x.h +++ b/include/linux/smc91x.h @@ -14,6 +14,8 @@ #define SMC91X_IO_SHIFT_3 (3 << 4) #define SMC91X_IO_SHIFT(x) (((x) >> 4) & 0x3) +#define SMC91X_USE_DMA (1 << 6) + struct smc91x_platdata { unsigned long flags; }; -- cgit v1.2.1