From f534e52f091a7b9f51fb6726710bdf731b663e94 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Fri, 15 May 2009 23:39:31 +0000 Subject: can: SJA1000 generic platform bus driver This driver adds support for the SJA1000 chips connected to the "platform bus", which can be found on various embedded systems. Signed-off-by: Sascha Hauer Signed-off-by: Wolfgang Grandegger Signed-off-by: Marc Kleine-Budde Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller --- include/linux/can/platform/sja1000.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 include/linux/can/platform/sja1000.h (limited to 'include/linux/can') diff --git a/include/linux/can/platform/sja1000.h b/include/linux/can/platform/sja1000.h new file mode 100644 index 000000000000..37966e630ff5 --- /dev/null +++ b/include/linux/can/platform/sja1000.h @@ -0,0 +1,32 @@ +#ifndef _CAN_PLATFORM_SJA1000_H_ +#define _CAN_PLATFORM_SJA1000_H_ + +/* clock divider register */ +#define CDR_CLKOUT_MASK 0x07 +#define CDR_CLK_OFF 0x08 /* Clock off (CLKOUT pin) */ +#define CDR_RXINPEN 0x20 /* TX1 output is RX irq output */ +#define CDR_CBP 0x40 /* CAN input comparator bypass */ +#define CDR_PELICAN 0x80 /* PeliCAN mode */ + +/* output control register */ +#define OCR_MODE_BIPHASE 0x00 +#define OCR_MODE_TEST 0x01 +#define OCR_MODE_NORMAL 0x02 +#define OCR_MODE_CLOCK 0x03 +#define OCR_TX0_INVERT 0x04 +#define OCR_TX0_PULLDOWN 0x08 +#define OCR_TX0_PULLUP 0x10 +#define OCR_TX0_PUSHPULL 0x18 +#define OCR_TX1_INVERT 0x20 +#define OCR_TX1_PULLDOWN 0x40 +#define OCR_TX1_PULLUP 0x80 +#define OCR_TX1_PUSHPULL 0xc0 + +struct sja1000_platform_data { + u32 clock; /* CAN bus oscillator frequency in Hz */ + + u8 ocr; /* output control register */ + u8 cdr; /* clock divider register */ +}; + +#endif /* !_CAN_PLATFORM_SJA1000_H_ */ -- cgit v1.2.1