From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- include/asm-m68k/dvma.h | 243 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 243 insertions(+) create mode 100644 include/asm-m68k/dvma.h (limited to 'include/asm-m68k/dvma.h') diff --git a/include/asm-m68k/dvma.h b/include/asm-m68k/dvma.h new file mode 100644 index 000000000000..5978f87b0a8a --- /dev/null +++ b/include/asm-m68k/dvma.h @@ -0,0 +1,243 @@ +/* $Id: dvma.h,v 1.4 1999/03/27 20:23:41 tsbogend Exp $ + * include/asm-m68k/dma.h + * + * Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu) + * + * Hacked to fit Sun3x needs by Thomas Bogendoerfer + */ + +#ifndef __M68K_DVMA_H +#define __M68K_DVMA_H + +#include + +#define DVMA_PAGE_SHIFT 13 +#define DVMA_PAGE_SIZE (1UL << DVMA_PAGE_SHIFT) +#define DVMA_PAGE_MASK (~(DVMA_PAGE_SIZE-1)) +#define DVMA_PAGE_ALIGN(addr) (((addr)+DVMA_PAGE_SIZE-1)&DVMA_PAGE_MASK) + +extern void dvma_init(void); +extern int dvma_map_iommu(unsigned long kaddr, unsigned long baddr, + int len); + +#define dvma_malloc(x) dvma_malloc_align(x, 0) +#define dvma_map(x, y) dvma_map_align(x, y, 0) +#define dvma_map_vme(x, y) (dvma_map(x, y) & 0xfffff) +#define dvma_map_align_vme(x, y, z) (dvma_map_align (x, y, z) & 0xfffff) +extern unsigned long dvma_map_align(unsigned long kaddr, int len, + int align); +extern void *dvma_malloc_align(unsigned long len, unsigned long align); + +extern void dvma_unmap(void *baddr); +extern void dvma_free(void *vaddr); + + +#ifdef CONFIG_SUN3 +/* sun3 dvma page support */ + +/* memory and pmegs potentially reserved for dvma */ +#define DVMA_PMEG_START 10 +#define DVMA_PMEG_END 16 +#define DVMA_START 0xf00000 +#define DVMA_END 0xfe0000 +#define DVMA_SIZE (DVMA_END-DVMA_START) +#define IOMMU_TOTAL_ENTRIES 128 +#define IOMMU_ENTRIES 120 + +/* empirical kludge -- dvma regions only seem to work right on 0x10000 + byte boundaries */ +#define DVMA_REGION_SIZE 0x10000 +#define DVMA_ALIGN(addr) (((addr)+DVMA_REGION_SIZE-1) & \ + ~(DVMA_REGION_SIZE-1)) + +/* virt <-> phys conversions */ +#define dvma_vtop(x) ((unsigned long)(x) & 0xffffff) +#define dvma_ptov(x) ((unsigned long)(x) | 0xf000000) +#define dvma_vtovme(x) ((unsigned long)(x) & 0x00fffff) +#define dvma_vmetov(x) ((unsigned long)(x) | 0xff00000) +#define dvma_vtob(x) dvma_vtop(x) +#define dvma_btov(x) dvma_ptov(x) + +static inline int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr, + int len) +{ + return 0; +} + +extern unsigned long dvma_page(unsigned long kaddr, unsigned long vaddr); + +#else /* Sun3x */ + +/* sun3x dvma page support */ + +#define DVMA_START 0x0 +#define DVMA_END 0xf00000 +#define DVMA_SIZE (DVMA_END-DVMA_START) +#define IOMMU_TOTAL_ENTRIES 2048 +/* the prom takes the top meg */ +#define IOMMU_ENTRIES (IOMMU_TOTAL_ENTRIES - 0x80) + +#define dvma_vtob(x) ((unsigned long)(x) & 0x00ffffff) +#define dvma_btov(x) ((unsigned long)(x) | 0xff000000) + +extern int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr, int len); + + + +/* everything below this line is specific to dma used for the onboard + ESP scsi on sun3x */ + +/* Structure to describe the current status of DMA registers on the Sparc */ +struct sparc_dma_registers { + __volatile__ unsigned long cond_reg; /* DMA condition register */ + __volatile__ unsigned long st_addr; /* Start address of this transfer */ + __volatile__ unsigned long cnt; /* How many bytes to transfer */ + __volatile__ unsigned long dma_test; /* DMA test register */ +}; + +/* DVMA chip revisions */ +enum dvma_rev { + dvmarev0, + dvmaesc1, + dvmarev1, + dvmarev2, + dvmarev3, + dvmarevplus, + dvmahme +}; + +#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1) + +/* Linux DMA information structure, filled during probe. */ +struct Linux_SBus_DMA { + struct Linux_SBus_DMA *next; + struct linux_sbus_device *SBus_dev; + struct sparc_dma_registers *regs; + + /* Status, misc info */ + int node; /* Prom node for this DMA device */ + int running; /* Are we doing DMA now? */ + int allocated; /* Are we "owned" by anyone yet? */ + + /* Transfer information. */ + unsigned long addr; /* Start address of current transfer */ + int nbytes; /* Size of current transfer */ + int realbytes; /* For splitting up large transfers, etc. */ + + /* DMA revision */ + enum dvma_rev revision; +}; + +extern struct Linux_SBus_DMA *dma_chain; + +/* Broken hardware... */ +#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1) +#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1) + +/* Fields in the cond_reg register */ +/* First, the version identification bits */ +#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */ +#define DMA_VERS0 0x00000000 /* Sunray DMA version */ +#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */ +#define DMA_VERS1 0x80000000 /* DMA rev 1 */ +#define DMA_VERS2 0xa0000000 /* DMA rev 2 */ +#define DMA_VERHME 0xb0000000 /* DMA hme gate array */ +#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */ + +#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */ +#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */ +#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */ +#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */ +#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */ +#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */ +#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */ +#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */ +#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */ +#define DMA_ST_WRITE 0x00000100 /* write from device to memory */ +#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */ +#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */ +#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */ +#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */ +#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */ +#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */ +#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */ +#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */ +#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */ +#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */ +#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */ +#define DMA_E_BURST8 0x00040000 /* ENET: SBUS r/w burst size */ +#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */ +#define DMA_BRST64 0x00080000 /* SCSI: 64byte bursts (HME on UltraSparc only) */ +#define DMA_BRST32 0x00040000 /* SCSI: 32byte bursts */ +#define DMA_BRST16 0x00000000 /* SCSI: 16byte bursts */ +#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */ +#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */ +#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */ +#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */ +#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */ +#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */ +#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */ +#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */ +#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */ +#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */ +#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */ + +/* Values describing the burst-size property from the PROM */ +#define DMA_BURST1 0x01 +#define DMA_BURST2 0x02 +#define DMA_BURST4 0x04 +#define DMA_BURST8 0x08 +#define DMA_BURST16 0x10 +#define DMA_BURST32 0x20 +#define DMA_BURST64 0x40 +#define DMA_BURSTBITS 0x7f + +/* Determine highest possible final transfer address given a base */ +#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL)) + +/* Yes, I hack a lot of elisp in my spare time... */ +#define DMA_ERROR_P(regs) ((((regs)->cond_reg) & DMA_HNDL_ERROR)) +#define DMA_IRQ_P(regs) ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))) +#define DMA_WRITE_P(regs) ((((regs)->cond_reg) & DMA_ST_WRITE)) +#define DMA_OFF(regs) ((((regs)->cond_reg) &= (~DMA_ENABLE))) +#define DMA_INTSOFF(regs) ((((regs)->cond_reg) &= (~DMA_INT_ENAB))) +#define DMA_INTSON(regs) ((((regs)->cond_reg) |= (DMA_INT_ENAB))) +#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV)) +#define DMA_SETSTART(regs, addr) ((((regs)->st_addr) = (char *) addr)) +#define DMA_BEGINDMA_W(regs) \ + ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB)))) +#define DMA_BEGINDMA_R(regs) \ + ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE))))) + +/* For certain DMA chips, we need to disable ints upon irq entry + * and turn them back on when we are done. So in any ESP interrupt + * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT + * when leaving the handler. You have been warned... + */ +#define DMA_IRQ_ENTRY(dma, dregs) do { \ + if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \ + } while (0) + +#define DMA_IRQ_EXIT(dma, dregs) do { \ + if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \ + } while(0) + +/* Reset the friggin' thing... */ +#define DMA_RESET(dma) do { \ + struct sparc_dma_registers *regs = dma->regs; \ + /* Let the current FIFO drain itself */ \ + sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN)); \ + /* Reset the logic */ \ + regs->cond_reg |= (DMA_RST_SCSI); /* assert */ \ + __delay(400); /* let the bits set ;) */ \ + regs->cond_reg &= ~(DMA_RST_SCSI); /* de-assert */ \ + sparc_dma_enable_interrupts(regs); /* Re-enable interrupts */ \ + /* Enable FAST transfers if available */ \ + if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS; \ + dma->running = 0; \ +} while(0) + + +#endif /* !CONFIG_SUN3 */ + +#endif /* !(__M68K_DVMA_H) */ -- cgit v1.2.1