From 8cdf92a98fa0f91068615443f2a8597b7f2c34ca Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 1 Jan 2007 19:31:15 +0000 Subject: Fix Maple PATA IRQ assignment. On the Maple board, the AMD8111 IDE is in legacy mode... except that it appears on IRQ 20 instead of IRQ 15. For drivers/ide this was handled by the architecture's "pci_get_legacy_ide_irq()" function, but in libata we just hard-code the numbers 14 and 15. This patch provides asm-powerpc/libata-portmap.h which maps the IRQ as appropriate, having added a pci_dev argument to the ATA_{PRIM,SECOND}ARY_IRQ macros. There's probably a better way to do this -- especially if we observe that the _only_ case in which this seemingly-generic "pci_get_legacy_ide_irq()" function returns anything other than 14 and 15 for primary and secondary respectively is the case of the AMD8111 on the Maple board -- couldn't we handle that with a special case in the pata_amd driver, or perhaps with a PCI quirk for Maple to switch it into native mode during early boot and assign resources properly? Signed-off-by: David Woodhouse Signed-off-by: Jeff Garzik --- include/asm-generic/libata-portmap.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/asm-generic/libata-portmap.h') diff --git a/include/asm-generic/libata-portmap.h b/include/asm-generic/libata-portmap.h index 9202fd02d5be..62fb3618293d 100644 --- a/include/asm-generic/libata-portmap.h +++ b/include/asm-generic/libata-portmap.h @@ -3,10 +3,10 @@ #define ATA_PRIMARY_CMD 0x1F0 #define ATA_PRIMARY_CTL 0x3F6 -#define ATA_PRIMARY_IRQ 14 +#define ATA_PRIMARY_IRQ(dev) 14 #define ATA_SECONDARY_CMD 0x170 #define ATA_SECONDARY_CTL 0x376 -#define ATA_SECONDARY_IRQ 15 +#define ATA_SECONDARY_IRQ(dev) 15 #endif -- cgit v1.2.1