From f20f258603ebc5da91e76884cf0c0d7ac9804b1c Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 5 Oct 2008 18:23:27 +0200 Subject: ide-cd: temporary tray close fix This one fixes http://bugzilla.kernel.org/show_bug.cgi?id=11602. A more generic fix for drives which cannot autoclose tray will follow. Signed-off-by: Borislav Petkov Cc: Jens Axboe [bart: add an extra parentheses for consistency with the rest of kernel code] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 49a8c589e346..e1cd7d520fc0 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1661,7 +1661,9 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive) cdi->mask &= ~CDC_PLAY_AUDIO; mechtype = buf[8 + 6] >> 5; - if (mechtype == mechtype_caddy || mechtype == mechtype_popup) + if (mechtype == mechtype_caddy || + mechtype == mechtype_popup || + (drive->atapi_flags & IDE_AFLAG_NO_AUTOCLOSE)) cdi->mask |= CDC_CLOSE_TRAY; if (cdi->sanyo_slot > 0) { @@ -1859,6 +1861,7 @@ static const struct cd_list_entry ide_cd_quirks_list[] = { { "MATSHITADVD-ROM SR-8176", NULL, IDE_AFLAG_PLAY_AUDIO_OK }, { "MATSHITADVD-ROM SR-8174", NULL, IDE_AFLAG_PLAY_AUDIO_OK }, { "Optiarc DVD RW AD-5200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK }, + { "Optiarc DVD RW AD-7543A", NULL, IDE_AFLAG_NO_AUTOCLOSE }, { NULL, NULL, 0 } }; -- cgit v1.2.1 From 22e05b4549bf2405d6aca128540b20cd2dd33f1f Mon Sep 17 00:00:00 2001 From: Sergei Shtylylov Date: Sun, 5 Oct 2008 18:23:27 +0200 Subject: ide-dma: fix ide_build_dmatable() for TRM290 Apparently, 'xcount' being 0 does not mean 0 bytes for TRM290; it means 4 bytes, judging from the code immediately preceding this check. So, we must never try to "split" the PRD for TRM290. This is probably never hit anyway -- with the DMA buffers aligned to at least 512 bytes and ATAPI DMA not being used for non block I/O commands... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index adc682755857..3fa07c0aeaa4 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -211,7 +211,7 @@ int ide_build_dmatable (ide_drive_t *drive, struct request *rq) xcount = bcount & 0xffff; if (is_trm290) xcount = ((xcount >> 2) - 1) << 16; - if (xcount == 0x0000) { + else if (xcount == 0x0000) { /* * Most chipsets correctly interpret a length of 0x0000 as 64KB, * but at least one (e.g. CS5530) misinterprets it as zero (!). -- cgit v1.2.1 From 2fef357cf391b56b8b6952a412f7324e50427a77 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 5 Oct 2008 18:23:28 +0200 Subject: IDE: Fix platform device registration in Swarm IDE driver (v2) The Swarm IDE driver uses a release method which is defined in the driver itself thus potentially oopsable. The simple fix would be to just leak the device but this patch goes the full length and moves the entire handling of the platform device in the platform code and retains only the platform driver code in drivers/ide/mips/swarm.c. Signed-off-by: Ralf Baechle Cc: "Maciej W. Rozycki" Acked-by: Sergei Shtylyov [bart: remove no longer needed BLK_DEV_IDE_SWARM from ide/Kconfig] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 4 - drivers/ide/mips/Makefile | 1 - drivers/ide/mips/swarm.c | 197 ---------------------------------------------- 3 files changed, 202 deletions(-) delete mode 100644 drivers/ide/mips/swarm.c (limited to 'drivers') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 8e93a797c93d..052879a6f853 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -780,10 +780,6 @@ config BLK_DEV_IDEDMA_PMAC to transfer data to and from memory. Saying Y is safe and improves performance. -config BLK_DEV_IDE_SWARM - tristate "IDE for Sibyte evaluation boards" - depends on SIBYTE_SB1xxx_SOC - config BLK_DEV_IDE_AU1XXX bool "IDE for AMD Alchemy Au1200" depends on SOC_AU1200 diff --git a/drivers/ide/mips/Makefile b/drivers/ide/mips/Makefile index 677c7b2bac92..5873fa0b8769 100644 --- a/drivers/ide/mips/Makefile +++ b/drivers/ide/mips/Makefile @@ -1,4 +1,3 @@ -obj-$(CONFIG_BLK_DEV_IDE_SWARM) += swarm.o obj-$(CONFIG_BLK_DEV_IDE_AU1XXX) += au1xxx-ide.o EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c deleted file mode 100644 index 39c9ee995857..000000000000 --- a/drivers/ide/mips/swarm.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * Copyright (C) 2001, 2002, 2003 Broadcom Corporation - * Copyright (C) 2004 MontaVista Software Inc. - * Author: Manish Lachwani, mlachwani@mvista.com - * Copyright (C) 2004 MIPS Technologies, Inc. All rights reserved. - * Author: Maciej W. Rozycki - * Copyright (c) 2006, 2008 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - * Derived loosely from ide-pmac.c, so: - * Copyright (C) 1998 Paul Mackerras. - * Copyright (C) 1995-1998 Mark Lord - */ - -/* - * Boards with SiByte processors so far have supported IDE devices via - * the Generic Bus, PCI bus, and built-in PCMCIA interface. In all - * cases, byte-swapping must be avoided for these devices (whereas - * other PCI devices, for example, will require swapping). Any - * SiByte-targetted kernel including IDE support will include this - * file. Probing of a Generic Bus for an IDE device is controlled by - * the definition of "SIBYTE_HAVE_IDE", which is provided by - * for Broadcom boards. - */ - -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - -#define DRV_NAME "ide-swarm" - -static char swarm_ide_string[] = DRV_NAME; - -static struct resource swarm_ide_resource = { - .name = "SWARM GenBus IDE", - .flags = IORESOURCE_MEM, -}; - -static struct platform_device *swarm_ide_dev; - -static const struct ide_port_info swarm_port_info = { - .name = DRV_NAME, - .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, -}; - -/* - * swarm_ide_probe - if the board header indicates the existence of - * Generic Bus IDE, allocate a HWIF for it. - */ -static int __devinit swarm_ide_probe(struct device *dev) -{ - u8 __iomem *base; - struct ide_host *host; - phys_t offset, size; - int i, rc; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; - - if (!SIBYTE_HAVE_IDE) - return -ENODEV; - - base = ioremap(A_IO_EXT_BASE, 0x800); - offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS)); - size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS)); - iounmap(base); - - offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE; - size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE; - if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) { - printk(KERN_INFO DRV_NAME - ": IDE interface at GenBus disabled\n"); - return -EBUSY; - } - - printk(KERN_INFO DRV_NAME ": IDE interface at GenBus slot %i\n", - IDE_CS); - - swarm_ide_resource.start = offset; - swarm_ide_resource.end = offset + size - 1; - if (request_resource(&iomem_resource, &swarm_ide_resource)) { - printk(KERN_ERR DRV_NAME - ": can't request I/O memory resource\n"); - return -EBUSY; - } - - base = ioremap(offset, size); - - memset(&hw, 0, sizeof(hw)); - for (i = 0; i <= 7; i++) - hw.io_ports_array[i] = - (unsigned long)(base + ((0x1f0 + i) << 5)); - hw.io_ports.ctl_addr = - (unsigned long)(base + (0x3f6 << 5)); - hw.irq = K_INT_GB_IDE; - hw.chipset = ide_generic; - - rc = ide_host_add(&swarm_port_info, hws, &host); - if (rc) - goto err; - - dev_set_drvdata(dev, host); - - return 0; -err: - release_resource(&swarm_ide_resource); - iounmap(base); - return rc; -} - -static struct device_driver swarm_ide_driver = { - .name = swarm_ide_string, - .bus = &platform_bus_type, - .probe = swarm_ide_probe, -}; - -static void swarm_ide_platform_release(struct device *device) -{ - struct platform_device *pldev; - - /* free device */ - pldev = to_platform_device(device); - kfree(pldev); -} - -static int __devinit swarm_ide_init_module(void) -{ - struct platform_device *pldev; - int err; - - printk(KERN_INFO "SWARM IDE driver\n"); - - if (driver_register(&swarm_ide_driver)) { - printk(KERN_ERR "Driver registration failed\n"); - err = -ENODEV; - goto out; - } - - if (!(pldev = kzalloc(sizeof (*pldev), GFP_KERNEL))) { - err = -ENOMEM; - goto out_unregister_driver; - } - - pldev->name = swarm_ide_string; - pldev->id = 0; - pldev->dev.release = swarm_ide_platform_release; - - if (platform_device_register(pldev)) { - err = -ENODEV; - goto out_free_pldev; - } - - if (!pldev->dev.driver) { - /* - * The driver was not bound to this device, there was - * no hardware at this address. Unregister it, as the - * release fuction will take care of freeing the - * allocated structure - */ - platform_device_unregister (pldev); - } - - swarm_ide_dev = pldev; - - return 0; - -out_free_pldev: - kfree(pldev); - -out_unregister_driver: - driver_unregister(&swarm_ide_driver); -out: - return err; -} - -module_init(swarm_ide_init_module); -- cgit v1.2.1 From f3e85ee70a8dd18e6ffa933ae4065a7031837cf3 Mon Sep 17 00:00:00 2001 From: Bodo Eggert <7eggert@gmx.de> Date: Sun, 5 Oct 2008 18:23:28 +0200 Subject: ide-cd: Optiarc DVD RW AD-7200A does play audio The Optiarc DVD RW AD-7200A can play audio, but tells it could not. Signed-off-by: Bodo Eggert <7eggert@gmx.de> Tested-by: Nick Warne Received-from: Borislav Petkov [bart: keep "audio" quirks together] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index e1cd7d520fc0..f16bb4667238 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1861,6 +1861,7 @@ static const struct cd_list_entry ide_cd_quirks_list[] = { { "MATSHITADVD-ROM SR-8176", NULL, IDE_AFLAG_PLAY_AUDIO_OK }, { "MATSHITADVD-ROM SR-8174", NULL, IDE_AFLAG_PLAY_AUDIO_OK }, { "Optiarc DVD RW AD-5200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK }, + { "Optiarc DVD RW AD-7200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK }, { "Optiarc DVD RW AD-7543A", NULL, IDE_AFLAG_NO_AUTOCLOSE }, { NULL, NULL, 0 } }; -- cgit v1.2.1 From ca09a237b8c6b053e101a4a83bc30d2c48435bd5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 5 Oct 2008 18:23:28 +0200 Subject: ide: workaround for bogus gcc warning in ide_sysfs_register_port() Reported-by: "Steven Noonan" Suggested-by: "Elias Oltmanns" Cc: mingo@elte.hu Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 994e41099b42..a51a30e9eab3 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1492,7 +1492,7 @@ static struct device_attribute *ide_port_attrs[] = { static int ide_sysfs_register_port(ide_hwif_t *hwif) { - int i, rc; + int i, uninitialized_var(rc); for (i = 0; ide_port_attrs[i]; i++) { rc = device_create_file(hwif->portdev, ide_port_attrs[i]); -- cgit v1.2.1