From b872ca4081c480e3d76443282ffd7f206321f50f Mon Sep 17 00:00:00 2001 From: Joe Carnuccio Date: Thu, 22 Jan 2009 09:45:36 -0800 Subject: [SCSI] qla2xxx: Correct descriptions in flash manipulation routines. When clearing the flash device's SR, the comment is incorrect... clearing the SR is 2 steps: 1. the SR protect bit is 1, so the first write zero clears only that bit, 2. the SR protect bit is now 0, so the next write zero clears the remaining bits. The sector erase debug print more correctly identifies that the erase failed. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_sup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index ed9582603afa..9c3b694c049d 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -944,9 +944,9 @@ qla24xx_unprotect_flash(struct qla_hw_data *ha) if (!ha->fdt_wrt_disable) return; - /* Disable flash write-protection. */ + /* Disable flash write-protection, first clear SR protection bit */ qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0); - /* Some flash parts need an additional zero-write to clear bits.*/ + /* Then write zero again to clear remaining SR bits.*/ qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0); } @@ -1021,7 +1021,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, (fdata & 0xff00) |((fdata << 16) & 0xff0000) | ((fdata >> 16) & 0xff)); if (ret != QLA_SUCCESS) { - DEBUG9(qla_printk("Unable to flash sector: " + DEBUG9(qla_printk("Unable to erase sector: " "address=%x.\n", faddr)); break; } -- cgit v1.2.1