From a7debe789dfcaee9c4d81e5738b0be8c5d93930b Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 7 Mar 2010 10:58:29 +0100 Subject: pcmcia: pass FORCED_PULSE parameter in pcmcia_request_configuration() As it's only used there it makes no sense relying on pcmcia_request_irq(). CC: alsa-devel@alsa-project.org Signed-off-by: Dominik Brodowski --- drivers/pcmcia/pcmcia_resource.c | 11 +++-------- drivers/staging/comedi/drivers/ni_labpc_cs.c | 5 +++-- 2 files changed, 6 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index cefc4cda9d3e..8dce223f3f44 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -426,10 +426,6 @@ static int pcmcia_release_irq(struct pcmcia_device *p_dev, irq_req_t *req) if (c->state & CONFIG_LOCKED) goto out; - if (c->irq.Attributes != req->Attributes) { - dev_dbg(&s->dev, "IRQ attributes must match assigned ones\n"); - goto out; - } if (s->pcmcia_irq != req->AssignedIRQ) { dev_dbg(&s->dev, "IRQ must match assigned one\n"); goto out; @@ -553,9 +549,9 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, if (req->Present & PRESENT_IOBASE_0) c->Option |= COR_ADDR_DECODE; } - if (req->Attributes & CONF_ENABLE_IRQ) - if (!(c->irq.Attributes & IRQ_FORCED_PULSE)) - c->Option |= COR_LEVEL_REQ; + if ((req->Attributes & CONF_ENABLE_IRQ) && + !(req->Attributes & CONF_ENABLE_PULSE_IRQ)) + c->Option |= COR_LEVEL_REQ; pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &c->Option); mdelay(40); } @@ -730,7 +726,6 @@ int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req) } } - c->irq.Attributes = req->Attributes; req->AssignedIRQ = irq; p_dev->_irq = 1; diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index 8ad1055a5cc1..6e4ed0d9105a 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -230,7 +230,7 @@ static int labpc_cs_attach(struct pcmcia_device *link) link->priv = local; /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_FORCED_PULSE; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->irq.Handler = NULL; /* @@ -307,7 +307,8 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev, /* Do we need to allocate an interrupt? */ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->conf.Attributes |= + (CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ); /* IO window settings */ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; -- cgit v1.2.1