From a40f73419f02e40555f692785ea1c1813d5b4c12 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 31 May 2011 16:31:22 -0700 Subject: mtd: nand: consolidate redundant flash-based BBT flags This patch works with the following three flags from two headers (nand.h and bbm.h): (1) NAND_USE_FLASH_BBT (nand.h) (2) NAND_USE_FLASH_BBT_NO_OOB (nand.h) (3) NAND_BBT_NO_OOB (bbm.h) These flags are all related and interdependent, yet they were in different headers. Flag (2) is simply the combination of (1) and (3) and can be eliminated. This patch accomplishes the following: * eliminate NAND_USE_FLASH_BBT_NO_OOB (i.e., flag (2)) * move NAND_USE_FLASH_BBT (i.e., flag (1)) to bbm.h It's important to note that because (1) and (3) are now both found in bbm.h, they should NOT be used in the "nand_chip.options" field. I removed a small section from the mtdnand DocBook because it referes to NAND_USE_FLASH_BBT in nand.h, which has been moved to bbm.h. Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy --- drivers/mtd/nand/atmel_nand.c | 2 +- drivers/mtd/nand/autcpu12.c | 4 ++-- drivers/mtd/nand/bcm_umi_nand.c | 2 +- drivers/mtd/nand/cafe_nand.c | 3 ++- drivers/mtd/nand/cs553x_nand.c | 3 ++- drivers/mtd/nand/davinci_nand.c | 4 +++- drivers/mtd/nand/denali.c | 3 ++- drivers/mtd/nand/diskonchip.c | 2 +- drivers/mtd/nand/fsl_elbc_nand.c | 4 ++-- drivers/mtd/nand/mpc5121_nfc.c | 3 ++- drivers/mtd/nand/mxc_nand.c | 2 +- drivers/mtd/nand/nand_base.c | 2 +- drivers/mtd/nand/nand_bbt.c | 20 ++++++++++---------- drivers/mtd/nand/nandsim.c | 4 ++-- drivers/mtd/nand/pasemi_nand.c | 3 ++- drivers/mtd/nand/plat_nand.c | 1 + drivers/mtd/nand/s3c2410.c | 6 ++++-- 17 files changed, 39 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 55da20ccc7a8..78d551622e11 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -583,7 +583,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) if (on_flash_bbt) { printk(KERN_INFO "atmel_nand: Use On Flash BBT\n"); - nand_chip->options |= NAND_USE_FLASH_BBT; + nand_chip->bbt_options |= NAND_USE_FLASH_BBT; } if (!cpu_has_dma()) diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c index eddc9a224985..adf934df8958 100644 --- a/drivers/mtd/nand/autcpu12.c +++ b/drivers/mtd/nand/autcpu12.c @@ -172,9 +172,9 @@ static int __init autcpu12_init(void) /* Enable the following for a flash based bad block table */ /* - this->options = NAND_USE_FLASH_BBT; + this->bbt_options = NAND_USE_FLASH_BBT; */ - this->options = NAND_USE_FLASH_BBT; + this->bbt_options = NAND_USE_FLASH_BBT; /* Scan to find existence of the device */ if (nand_scan(autcpu12_mtd, 1)) { diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c index 8c569e454dc5..974d9bc8e48e 100644 --- a/drivers/mtd/nand/bcm_umi_nand.c +++ b/drivers/mtd/nand/bcm_umi_nand.c @@ -474,7 +474,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev) #if NAND_ECC_BCH if (board_mtd->writesize > 512) { - if (this->options & NAND_USE_FLASH_BBT) + if (this->bbt_options & NAND_USE_FLASH_BBT) largepage_bbt.options = NAND_BBT_SCAN2NDPAGE; this->badblock_pattern = &largepage_bbt; } diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index 87ebb4e5b0c3..7dd7d844d2cf 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -686,7 +686,8 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev, cafe->nand.chip_delay = 0; /* Enable the following for a flash based bad block table */ - cafe->nand.options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR | NAND_OWN_BUFFERS; + cafe->nand.bbt_options = NAND_USE_FLASH_BBT; + cafe->nand.options = NAND_NO_AUTOINCR | NAND_OWN_BUFFERS; if (skipbbt) { cafe->nand.options |= NAND_SKIP_BBTSCAN; diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c index f59ad1f2d5db..05adedd8c20c 100644 --- a/drivers/mtd/nand/cs553x_nand.c +++ b/drivers/mtd/nand/cs553x_nand.c @@ -239,7 +239,8 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr) this->ecc.correct = nand_correct_data; /* Enable the following for a flash based bad block table */ - this->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR; + this->bbt_options = NAND_USE_FLASH_BBT; + this->options = NAND_NO_AUTOINCR; /* Scan to find existence of the device */ if (nand_scan(new_mtd, 1)) { diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 1f34951ae1a7..69f70195ff35 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -581,7 +581,9 @@ static int __init nand_davinci_probe(struct platform_device *pdev) info->chip.chip_delay = 0; info->chip.select_chip = nand_davinci_select_chip; - /* options such as NAND_USE_FLASH_BBT or 16-bit widths */ + /* options such as NAND_USE_FLASH_BBT */ + info->chip.bbt_options = pdata->bbt_options; + /* options such as 16-bit widths */ info->chip.options = pdata->options; info->chip.bbt_td = pdata->bbt_td; info->chip.bbt_md = pdata->bbt_md; diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index d5276218945f..dbb6fbae7d25 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1577,7 +1577,8 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) denali->nand.bbt_md = &bbt_mirror_descr; /* skip the scan for now until we have OOB read and write support */ - denali->nand.options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN; + denali->nand.bbt_options |= NAND_USE_FLASH_BBT; + denali->nand.options |= NAND_SKIP_BBTSCAN; denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME; /* Denali Controller only support 15bit and 8bit ECC in MRST, diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index 7837728d02ff..f70bc73e7948 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -1652,7 +1652,7 @@ static int __init doc_probe(unsigned long physadr) nand->ecc.mode = NAND_ECC_HW_SYNDROME; nand->ecc.size = 512; nand->ecc.bytes = 6; - nand->options = NAND_USE_FLASH_BBT; + nand->bbt_options = NAND_USE_FLASH_BBT; doc->physadr = physadr; doc->virtadr = virtadr; diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 33d8aad8bba5..bff4791d73c3 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -791,8 +791,8 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) chip->bbt_md = &bbt_mirror_descr; /* set up nand options */ - chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR | - NAND_USE_FLASH_BBT; + chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR; + chip->bbt_options = NAND_USE_FLASH_BBT; chip->controller = &elbc_fcm_ctrl->controller; chip->priv = priv; diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c index eb1fbac63eb6..0ac64b54bd67 100644 --- a/drivers/mtd/nand/mpc5121_nfc.c +++ b/drivers/mtd/nand/mpc5121_nfc.c @@ -735,7 +735,8 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op) chip->write_buf = mpc5121_nfc_write_buf; chip->verify_buf = mpc5121_nfc_verify_buf; chip->select_chip = mpc5121_nfc_select_chip; - chip->options = NAND_NO_AUTOINCR | NAND_USE_FLASH_BBT; + chip->options = NAND_NO_AUTOINCR; + chip->bbt_options = NAND_USE_FLASH_BBT; chip->ecc.mode = NAND_ECC_SOFT; /* Support external chip-select logic on ADS5121 board */ diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 90df34c4d26c..ed68fde3d1be 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -1179,7 +1179,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) this->bbt_td = &bbt_main_descr; this->bbt_md = &bbt_mirror_descr; /* update flash based bbt */ - this->options |= NAND_USE_FLASH_BBT; + this->bbt_options |= NAND_USE_FLASH_BBT; } init_completion(&host->op_completion); diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 3a9a8fc6a36c..d39dffe71de4 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -405,7 +405,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); /* Do we have a flash based bad block table ? */ - if (chip->options & NAND_USE_FLASH_BBT) + if (chip->bbt_options & NAND_USE_FLASH_BBT) ret = nand_update_bbt(mtd, ofs); else { nand_get_device(chip, mtd, FL_WRITING); diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index 5df01d8efd92..66f93e2ac16b 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -36,9 +36,9 @@ * The table is marked in the OOB area with an ident pattern and a version * number which indicates which of both tables is more up to date. If the NAND * controller needs the complete OOB area for the ECC information then the - * option NAND_USE_FLASH_BBT_NO_OOB should be used: it moves the ident pattern - * and the version byte into the data area and the OOB area will remain - * untouched. + * option NAND_BBT_NO_OOB should be used (along with NAND_USE_FLASH_BBT, of + * course): it moves the ident pattern and the version byte into the data area + * and the OOB area will remain untouched. * * The table uses 2 bits per block * 11b: block is good @@ -1082,16 +1082,16 @@ static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd) pattern_len = bd->len; bits = bd->options & NAND_BBT_NRBITS_MSK; - BUG_ON((this->options & NAND_USE_FLASH_BBT_NO_OOB) && - !(this->options & NAND_USE_FLASH_BBT)); + BUG_ON((this->bbt_options & NAND_BBT_NO_OOB) && + !(this->bbt_options & NAND_USE_FLASH_BBT)); BUG_ON(!bits); if (bd->options & NAND_BBT_VERSION) pattern_len++; if (bd->options & NAND_BBT_NO_OOB) { - BUG_ON(!(this->options & NAND_USE_FLASH_BBT)); - BUG_ON(!(this->options & NAND_USE_FLASH_BBT_NO_OOB)); + BUG_ON(!(this->bbt_options & NAND_USE_FLASH_BBT)); + BUG_ON(!(this->bbt_options & NAND_BBT_NO_OOB)); BUG_ON(bd->offs); if (bd->options & NAND_BBT_VERSION) BUG_ON(bd->veroffs != bd->len); @@ -1357,15 +1357,15 @@ int nand_default_bbt(struct mtd_info *mtd) this->bbt_td = &bbt_main_descr; this->bbt_md = &bbt_mirror_descr; } - this->options |= NAND_USE_FLASH_BBT; + this->bbt_options |= NAND_USE_FLASH_BBT; return nand_scan_bbt(mtd, &agand_flashbased); } /* Is a flash based bad block table requested ? */ - if (this->options & NAND_USE_FLASH_BBT) { + if (this->bbt_options & NAND_USE_FLASH_BBT) { /* Use the default pattern descriptors */ if (!this->bbt_td) { - if (this->options & NAND_USE_FLASH_BBT_NO_OOB) { + if (this->bbt_options & NAND_BBT_NO_OOB) { this->bbt_td = &bbt_main_no_bbt_descr; this->bbt_md = &bbt_mirror_no_bbt_descr; } else { diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 357e8c5252a8..1856c42c62c4 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -2273,9 +2273,9 @@ static int __init ns_init_module(void) switch (bbt) { case 2: - chip->options |= NAND_USE_FLASH_BBT_NO_OOB; + chip->bbt_options |= NAND_BBT_NO_OOB; case 1: - chip->options |= NAND_USE_FLASH_BBT; + chip->bbt_options |= NAND_USE_FLASH_BBT; case 0: break; default: diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index b1aa41b8a4eb..1c17f091e16b 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -155,7 +155,8 @@ static int __devinit pasemi_nand_probe(struct platform_device *ofdev) chip->ecc.mode = NAND_ECC_SOFT; /* Enable the following for a flash based bad block table */ - chip->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR; + chip->options = NAND_NO_AUTOINCR; + chip->bbt_options = NAND_USE_FLASH_BBT; /* Scan to find existence of the device */ if (nand_scan(pasemi_nand_mtd, 1)) { diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c index 633c04bf76f6..ccdb16ec8143 100644 --- a/drivers/mtd/nand/plat_nand.c +++ b/drivers/mtd/nand/plat_nand.c @@ -79,6 +79,7 @@ static int __devinit plat_nand_probe(struct platform_device *pdev) data->chip.read_buf = pdata->ctrl.read_buf; data->chip.chip_delay = pdata->chip.chip_delay; data->chip.options |= pdata->chip.options; + data->chip.bbt_options |= pdata->chip.bbt_options; data->chip.ecc.hwctl = pdata->ctrl.hwcontrol; data->chip.ecc.layout = pdata->chip.ecclayout; diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 4405468f196b..370516c3f7c7 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -880,8 +880,10 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, /* If you use u-boot BBT creation code, specifying this flag will * let the kernel fish out the BBT from the NAND, and also skip the * full NAND scan that can take 1/2s or so. Little things... */ - if (set->flash_bbt) - chip->options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN; + if (set->flash_bbt) { + chip->bbt_options |= NAND_USE_FLASH_BBT; + chip->options |= NAND_SKIP_BBTSCAN; + } } /** -- cgit v1.2.1