From ece9528e5f88cee11303fceefe39382f1030cd4e Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 12 Jul 2011 08:18:15 -0700 Subject: gpio/omap: replace MOD_REG_BIT macro with static inline This macro is ugly and confusing, especially since it passes in most arguments, but uses an implied 'base' from the caller. Replace it with an equivalent static inline. Signed-off-by: Kevin Hilman --- drivers/gpio/gpio-omap.c | 54 ++++++++++++++++++++++++++---------------------- 1 file changed, 29 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 0599854e2217..34a7110d9bc8 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -148,13 +148,17 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0; } -#define MOD_REG_BIT(reg, bit_mask, set) \ -do { \ - int l = __raw_readl(base + reg); \ - if (set) l |= bit_mask; \ - else l &= ~bit_mask; \ - __raw_writel(l, base + reg); \ -} while(0) +static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set) +{ + int l = __raw_readl(base + reg); + + if (set) + l |= mask; + else + l &= ~mask; + + __raw_writel(l, base + reg); +} /** * _set_gpio_debounce - low level gpio debounce time @@ -210,28 +214,28 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, u32 gpio_bit = 1 << gpio; if (cpu_is_omap44xx()) { - MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); + _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + _gpio_rmw(base, OMAP4_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + _gpio_rmw(base, OMAP4_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); } else { - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); + _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + _gpio_rmw(base, OMAP24XX_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + _gpio_rmw(base, OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); } if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { if (cpu_is_omap44xx()) { - MOD_REG_BIT(OMAP4_GPIO_IRQWAKEN0, gpio_bit, - trigger != 0); + _gpio_rmw(base, OMAP4_GPIO_IRQWAKEN0, gpio_bit, + trigger != 0); } else { /* * GPIO wakeup request can only be generated on edge -- cgit v1.2.1 From 832337490f22987a1b739ba840e105c0c9af01bc Mon Sep 17 00:00:00 2001 From: Todd Poynor Date: Mon, 18 Jul 2011 07:43:14 -0700 Subject: gpio/omap: check return value from irq_alloc_generic_chip Ensure return value of irq_alloc_generic_chip() is checked before continuing on to use it. Signed-off-by: Todd Poynor Signed-off-by: Kevin Hilman --- drivers/gpio/gpio-omap.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 34a7110d9bc8..f0208a958185 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -1090,6 +1090,11 @@ omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start, gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base, handle_simple_irq); + if (!gc) { + dev_err(bank->dev, "Memory alloc failed for gc\n"); + return; + } + ct = gc->chip_types; /* NOTE: No ack required, reading IRQ status clears it. */ -- cgit v1.2.1 From 0c54781bc5aaec1e23bc50a4ef757b8e8bfc693b Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 17:55:54 +0000 Subject: DocBook/drm: Clean up code comment Signed-off-by: Michael Witten --- drivers/gpu/drm/i915/i915_drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index ce045a8cf82c..acf4ea84c801 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -785,8 +785,8 @@ static struct vm_operations_struct i915_gem_vm_ops = { }; static struct drm_driver driver = { - /* don't use mtrr's here, the Xserver or user space app should - * deal with them for intel hardware. + /* Don't use MTRRs here; the Xserver or userspace app should + * deal with them for Intel hardware. */ .driver_features = DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/ -- cgit v1.2.1 From f0eb824beee3f596b9799e667a6fdac3116e9f7d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 14 Oct 2011 15:31:59 +0200 Subject: gpio: pca953x: remove unneeded check for chip type We can assume our own device_id table is correct, so remove checking if the chip type is valid. (The check was bogus anyway: If it found an invalid entry, it returned with 0!) This is in preparation for further cleanups. Signed-off-by: Wolfram Sang Cc: Grant Likely Signed-off-by: Grant Likely --- drivers/gpio/gpio-pca953x.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index c43b8ff626a7..45de6a4ac632 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -673,10 +673,8 @@ static int __devinit pca953x_probe(struct i2c_client *client, if (chip->chip_type == PCA953X_TYPE) device_pca953x_init(chip, invert); - else if (chip->chip_type == PCA957X_TYPE) - device_pca957x_init(chip, invert); else - goto out_failed; + device_pca957x_init(chip, invert); ret = pca953x_irq_setup(chip, id, irq_base); if (ret) -- cgit v1.2.1 From 7ea2aa2046a15af1c048115e7c05f1ba1566899d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 14 Oct 2011 15:32:00 +0200 Subject: gpio: pca953x: propagate the errno from the chip_init functions Initializing the chips may return with an error, but this error gets dropped in probe(). Propagate this further to the driver core. Also, simplify returning the error in one of the init functions. Signed-off-by: Wolfram Sang Cc: Grant Likely Signed-off-by: Grant Likely --- drivers/gpio/gpio-pca953x.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index 45de6a4ac632..a3fef0c94ba6 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -595,9 +595,6 @@ static int __devinit device_pca953x_init(struct pca953x_chip *chip, int invert) /* set platform specific polarity inversion */ ret = pca953x_write_reg(chip, PCA953X_INVERT, invert); - if (ret) - goto out; - return 0; out: return ret; } @@ -639,7 +636,7 @@ static int __devinit pca953x_probe(struct i2c_client *client, struct pca953x_platform_data *pdata; struct pca953x_chip *chip; int irq_base=0, invert=0; - int ret = 0; + int ret; chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL); if (chip == NULL) @@ -672,9 +669,11 @@ static int __devinit pca953x_probe(struct i2c_client *client, pca953x_setup_gpio(chip, id->driver_data & PCA_GPIO_MASK); if (chip->chip_type == PCA953X_TYPE) - device_pca953x_init(chip, invert); + ret = device_pca953x_init(chip, invert); else - device_pca957x_init(chip, invert); + ret = device_pca957x_init(chip, invert); + if (ret) + goto out_failed; ret = pca953x_irq_setup(chip, id, irq_base); if (ret) -- cgit v1.2.1 From 3af1f8a41feab47b232b0c3d3b2322426672480d Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Mon, 3 Oct 2011 15:16:47 +0100 Subject: serial: sh-sci: Fix up SH-2A SCIF support. This fixes up support for SH-2(A) SCIFs by introducing a new regtype. As expected, it's close to the SH-4A SCIF with fifodata, but still different enough to warrant its own type. Fixes up a number of FIFO overflows and similar for both SH7203/SH7264. Signed-off-by: Phil Edworthy Tested-by: Federico Fuga Signed-off-by: Paul Mundt --- drivers/tty/serial/sh-sci.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 9871c57b348e..1b6ec568f32a 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -206,6 +206,25 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [SCLSR] = sci_reg_invalid, }, + /* + * Common SH-2(A) SCIF definitions for ports with FIFO data + * count registers. + */ + [SCIx_SH2_SCIF_FIFODATA_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = { 0x20, 16 }, + [SCLSR] = { 0x24, 16 }, + }, + /* * Common SH-3 SCIF definitions. */ -- cgit v1.2.1 From dd2c0ca1b153b555c09fd8e08f6842e12cf8e87b Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 19 Sep 2011 18:51:13 -0700 Subject: sh: clkfwk: add clk_rate_mult_range_round() This provides a clk_rate_mult_range_round() helper for use by some of the CPG PLL ranged multipliers, following the same approach as used by the div ranges. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- drivers/sh/clk/core.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers') diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c index dc8d022c07a1..352036b1f9a2 100644 --- a/drivers/sh/clk/core.c +++ b/drivers/sh/clk/core.c @@ -173,6 +173,26 @@ long clk_rate_div_range_round(struct clk *clk, unsigned int div_min, return clk_rate_round_helper(&div_range_round); } +static long clk_rate_mult_range_iter(unsigned int pos, + struct clk_rate_round_data *rounder) +{ + return clk_get_rate(rounder->arg) * pos; +} + +long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min, + unsigned int mult_max, unsigned long rate) +{ + struct clk_rate_round_data mult_range_round = { + .min = mult_min, + .max = mult_max, + .func = clk_rate_mult_range_iter, + .arg = clk_get_parent(clk), + .rate = rate, + }; + + return clk_rate_round_helper(&mult_range_round); +} + int clk_rate_table_find(struct clk *clk, struct cpufreq_frequency_table *freq_table, unsigned long rate) -- cgit v1.2.1 From 241fa6e42f5462a82f00ddf5169628a8c3976548 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 11 Oct 2011 11:54:26 -0300 Subject: [media] uvcvideo: GET_RES should only be checked for BITMAP type menu controls Currently it is also being checked for non BITMAP type menu controls, breaking the logitech LED control menu added by uvcdynctrl, as well as potentially breaking the powerline frequency menu. Signed-off-by: Hans de Goede Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_ctrl.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index 10c2364f3e8a..254d32688843 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -1016,7 +1016,8 @@ int uvc_query_v4l2_menu(struct uvc_video_chain *chain, menu_info = &mapping->menu_info[query_menu->index]; - if (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES) { + if (mapping->data_type == UVC_CTRL_DATA_TYPE_BITMASK && + (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES)) { s32 bitmap; if (!ctrl->cached) { @@ -1225,7 +1226,8 @@ int uvc_ctrl_set(struct uvc_video_chain *chain, /* Valid menu indices are reported by the GET_RES request for * UVC controls that support it. */ - if (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES) { + if (mapping->data_type == UVC_CTRL_DATA_TYPE_BITMASK && + (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES)) { if (!ctrl->cached) { ret = uvc_ctrl_populate_cache(chain, ctrl); if (ret < 0) -- cgit v1.2.1 From a9380ba11fc384a52bcee0884ca6dd069deb6b1b Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 31 Oct 2011 23:20:41 -0300 Subject: [media] mxl111sf: fix return value of mxl111sf_idac_config mxl111sf_idac_config was incorrectly returning val instead of ret Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/mxl111sf-phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c index 91dc1fc2825b..ae8c2f839fcf 100644 --- a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c +++ b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c @@ -332,7 +332,7 @@ int mxl111sf_idac_config(struct mxl111sf_state *state, ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val); - return val; + return ret; } /* -- cgit v1.2.1 From 2f4133de28edafcaac3ce6b57faf8f40ed2ff1b9 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 31 Oct 2011 23:29:17 -0300 Subject: [media] mxl111sf: check for errors after mxl111sf_write_reg in mxl111sf_idac_config Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/mxl111sf-phy.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c index ae8c2f839fcf..09787be576ac 100644 --- a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c +++ b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c @@ -328,9 +328,11 @@ int mxl111sf_idac_config(struct mxl111sf_state *state, /* set hysteresis value reg: 0x0B<5:0> */ ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG, (hysteresis_value & 0x3F)); + mxl_fail(ret); } ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val); + mxl_fail(ret); return ret; } -- cgit v1.2.1 From cd834fa693160914029fee128f52e87a79d3e480 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 31 Oct 2011 23:31:04 -0300 Subject: [media] mxl111sf: remove pointless if condition in mxl111sf_config_spi Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/mxl111sf-phy.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c index 09787be576ac..b741b3a7a325 100644 --- a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c +++ b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c @@ -296,8 +296,7 @@ int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff) goto fail; ret = mxl111sf_write_reg(state, 0x00, 0x00); - if (mxl_fail(ret)) - goto fail; + mxl_fail(ret); fail: return ret; } -- cgit v1.2.1 From e836a1c078e230dd5a94bb086b186c2be3ec6a84 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 31 Oct 2011 23:46:46 -0300 Subject: [media] mxl111sf: fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fix build warning: variable ‘ret’ set but not used in function ‘mxl111sf_i2c_readagain’ Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/mxl111sf-i2c.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c index 2e8c288258a9..34434557ef65 100644 --- a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c +++ b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c @@ -398,7 +398,6 @@ static int mxl111sf_i2c_readagain(struct mxl111sf_state *state, u8 i2c_r_data[24]; u8 i = 0; u8 fifo_status = 0; - int ret; int status = 0; mxl_i2c("read %d bytes", count); @@ -418,7 +417,7 @@ static int mxl111sf_i2c_readagain(struct mxl111sf_state *state, i2c_w_data[4+(i*3)] = 0x00; } - ret = mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data); + mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data); /* Check for I2C NACK status */ if (mxl111sf_i2c_check_status(state) == 1) { -- cgit v1.2.1 From 4e549d6d4a32d1a610ad081841d575f64087744a Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Sun, 6 Nov 2011 12:57:31 +0100 Subject: MTD: MAPS: bcm963xx-flash.c: explicitly include module.h module.h was previously implicitly included through mtd/mtd.h. Fixes the following build failure after the module.h cleanup: CC drivers/mtd/maps/bcm963xx-flash.o drivers/mtd/maps/bcm963xx-flash.c: In function 'bcm963xx_probe': drivers/mtd/maps/bcm963xx-flash.c:208:29: error: 'THIS_MODULE' undeclared (first use in this function) [...] drivers/mtd/maps/bcm963xx-flash.c:276:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/mtd/maps/bcm963xx-flash.c:276:15: warning: function declaration isn't a prototype make[7]: *** [drivers/mtd/maps/bcm963xx-flash.o] Error 1 Signed-off-by: Jonas Gorski Signed-off-by: Paul Gortmaker --- drivers/mtd/maps/bcm963xx-flash.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mtd/maps/bcm963xx-flash.c b/drivers/mtd/maps/bcm963xx-flash.c index 608967fe74c6..736ca10ca9f1 100644 --- a/drivers/mtd/maps/bcm963xx-flash.c +++ b/drivers/mtd/maps/bcm963xx-flash.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.1 From 8f7346bdea64f2e3d02b0bcaf456e391c4cba134 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 6 Nov 2011 21:16:51 +0800 Subject: hwspinlock/u8500: include linux/module.h Include module.h to fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c:177: error: 'THIS_MODULE' undeclared here (not in a function) [...] drivers/hwspinlock/u8500_hsem.c:196: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/hwspinlock/u8500_hsem.c:196: warning: function declaration isn't a prototype make[2]: *** [drivers/hwspinlock/u8500_hsem.o] Error 1 make[1]: *** [drivers/hwspinlock] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin Signed-off-by: Paul Gortmaker --- drivers/hwspinlock/u8500_hsem.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hwspinlock/u8500_hsem.c b/drivers/hwspinlock/u8500_hsem.c index 143461a95ae4..0156af510032 100644 --- a/drivers/hwspinlock/u8500_hsem.c +++ b/drivers/hwspinlock/u8500_hsem.c @@ -21,6 +21,7 @@ * General Public License for more details. */ +#include #include #include #include -- cgit v1.2.1 From 3b8ce3aed986090d9249629f97c53b4dfb8c9783 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 7 Nov 2011 11:17:04 -0500 Subject: mfd: fix build failures in recently added ab5500 code These files had implicit dependencies on modular support which now show up as build failures with the module cleanup work merged to mainline. Reported-by: Axel Lin Signed-off-by: Paul Gortmaker --- drivers/mfd/ab5500-core.c | 1 + drivers/mfd/ab5500-debugfs.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c index 4175544b491b..ec10629a0b0b 100644 --- a/drivers/mfd/ab5500-core.c +++ b/drivers/mfd/ab5500-core.c @@ -13,6 +13,7 @@ * TODO: Event handling with irq_chip. Waiting for PRCMU fw support. */ +#include #include #include #include diff --git a/drivers/mfd/ab5500-debugfs.c b/drivers/mfd/ab5500-debugfs.c index 6be1fe6b5f9a..43c0ebb81956 100644 --- a/drivers/mfd/ab5500-debugfs.c +++ b/drivers/mfd/ab5500-debugfs.c @@ -4,6 +4,7 @@ * Debugfs support for the AB5500 MFD driver */ +#include #include #include #include -- cgit v1.2.1 From 6ea741a13690da9dbbac76175db8e313b0c4b817 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Fri, 21 Oct 2011 23:56:53 +0000 Subject: powerpc/ps3: irq: Remove IRQF_DISABLED Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang Acked-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- drivers/ps3/ps3-vuart.c | 2 +- drivers/ps3/ps3stor_lib.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ps3/ps3-vuart.c b/drivers/ps3/ps3-vuart.c index d9fb729535a1..fb7300837fee 100644 --- a/drivers/ps3/ps3-vuart.c +++ b/drivers/ps3/ps3-vuart.c @@ -952,7 +952,7 @@ static int ps3_vuart_bus_interrupt_get(void) } result = request_irq(vuart_bus_priv.virq, ps3_vuart_irq_handler, - IRQF_DISABLED, "vuart", &vuart_bus_priv); + 0, "vuart", &vuart_bus_priv); if (result) { pr_debug("%s:%d: request_irq failed (%d)\n", diff --git a/drivers/ps3/ps3stor_lib.c b/drivers/ps3/ps3stor_lib.c index cc328dec946b..8c3f5adf1bc6 100644 --- a/drivers/ps3/ps3stor_lib.c +++ b/drivers/ps3/ps3stor_lib.c @@ -167,7 +167,7 @@ int ps3stor_setup(struct ps3_storage_device *dev, irq_handler_t handler) goto fail_close_device; } - error = request_irq(dev->irq, handler, IRQF_DISABLED, + error = request_irq(dev->irq, handler, 0, dev->sbd.core.driver->name, dev); if (error) { dev_err(&dev->sbd.core, "%s:%u: request_irq failed %d\n", -- cgit v1.2.1 From 9a3f530f39f4490eaa18b02719fb74ce5f4d2d86 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 8 Nov 2011 16:22:01 +1100 Subject: md/raid5: abort any pending parity operations when array fails. When the number of failed devices exceeds the allowed number we must abort any active parity operations (checks or updates) as they are no longer meaningful, and can lead to a BUG_ON in handle_parity_checks6. This bug was introduce by commit 6c0069c0ae9659e3a91b68eaed06a5c6c37f45c8 in 2.6.29. Reported-by: Manish Katiyar Tested-by: Manish Katiyar Acked-by: Dan Williams Signed-off-by: NeilBrown Cc: stable@kernel.org --- drivers/md/raid5.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 472aedfb07cf..318bdae9b56c 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3159,10 +3159,14 @@ static void handle_stripe(struct stripe_head *sh) /* check if the array has lost more than max_degraded devices and, * if so, some requests might need to be failed. */ - if (s.failed > conf->max_degraded && s.to_read+s.to_write+s.written) - handle_failed_stripe(conf, sh, &s, disks, &s.return_bi); - if (s.failed > conf->max_degraded && s.syncing) - handle_failed_sync(conf, sh, &s); + if (s.failed > conf->max_degraded) { + sh->check_state = 0; + sh->reconstruct_state = 0; + if (s.to_read+s.to_write+s.written) + handle_failed_stripe(conf, sh, &s, disks, &s.return_bi); + if (s.syncing) + handle_failed_sync(conf, sh, &s); + } /* * might be able to return some write requests if the parity blocks -- cgit v1.2.1 From 257a4b42af7586fab4eaec7f04e6896b86551843 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 8 Nov 2011 16:22:06 +1100 Subject: md/raid5: STRIPE_ACTIVE has lock semantics, add barriers All updates that occur under STRIPE_ACTIVE should be globally visible when STRIPE_ACTIVE clears. test_and_set_bit() implies a barrier, but clear_bit() does not. This is suitable for 3.1-stable. Signed-off-by: Dan Williams Signed-off-by: NeilBrown Cc: stable@kernel.org --- drivers/md/raid5.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 318bdae9b56c..297e26092178 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3110,7 +3110,7 @@ static void handle_stripe(struct stripe_head *sh) struct r5dev *pdev, *qdev; clear_bit(STRIPE_HANDLE, &sh->state); - if (test_and_set_bit(STRIPE_ACTIVE, &sh->state)) { + if (test_and_set_bit_lock(STRIPE_ACTIVE, &sh->state)) { /* already being handled, ensure it gets handled * again when current action finishes */ set_bit(STRIPE_HANDLE, &sh->state); @@ -3375,7 +3375,7 @@ finish: return_io(s.return_bi); - clear_bit(STRIPE_ACTIVE, &sh->state); + clear_bit_unlock(STRIPE_ACTIVE, &sh->state); } static void raid5_activate_delayed(struct r5conf *conf) -- cgit v1.2.1 From fdcb23634c9b6649bb02c681033d4973491b0e35 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 6 Nov 2011 21:14:16 +0800 Subject: hwspinlock/u8500: fix build error due to undefined label Fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c: In function 'u8500_hsem_probe': drivers/hwspinlock/u8500_hsem.c:113: error: label 'free_state' used but not defined Signed-off-by: Axel Lin Signed-off-by: Ohad Ben-Cohen --- drivers/hwspinlock/u8500_hsem.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/hwspinlock/u8500_hsem.c b/drivers/hwspinlock/u8500_hsem.c index 143461a95ae4..a120f14814f9 100644 --- a/drivers/hwspinlock/u8500_hsem.c +++ b/drivers/hwspinlock/u8500_hsem.c @@ -108,10 +108,8 @@ static int __devinit u8500_hsem_probe(struct platform_device *pdev) return -ENODEV; io_base = ioremap(res->start, resource_size(res)); - if (!io_base) { - ret = -ENOMEM; - goto free_state; - } + if (!io_base) + return -ENOMEM; /* make sure protocol 1 is selected */ val = readl(io_base + HSEM_CTRL_REG); -- cgit v1.2.1 From 35b09c9bf619c4fc6040c52dcea6bd5bd6af7679 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 28 Oct 2011 14:42:41 +0300 Subject: drm/i915: fix if statement (bogus semi-colon) The semi-colon is a typo here and it makes the if statement unconditional. Signed-off-by: Dan Carpenter Signed-off-by: Keith Packard --- drivers/char/agp/intel-gtt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 66cd0b8096ca..3a8d44886010 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1236,7 +1236,7 @@ static int i9xx_setup(void) intel_private.gtt_bus_addr = reg_addr + gtt_offset; } - if (needs_idle_maps()); + if (needs_idle_maps()) intel_private.base.do_idle_maps = 1; intel_i9xx_setup_flush(); -- cgit v1.2.1 From a08185a3eb658854b29c05bcbfac0f85038ffe9f Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 28 Oct 2011 10:28:00 -0700 Subject: agp: iommu_gfx_mapped only available if CONFIG_INTEL_IOMMU is set Kernels with no iommu support cannot ever need the Ironlake work-around, so never enable it in that case. Might be better to completely remove the work-around from the kernel in this case? Signed-off-by: Keith Packard Reviewed-by: Ben Widawsky --- drivers/char/agp/intel-gtt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 3a8d44886010..c92424ca1a55 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1186,10 +1186,11 @@ static void gen6_cleanup(void) /* Certain Gen5 chipsets require require idling the GPU before * unmapping anything from the GTT when VT-d is enabled. */ -extern int intel_iommu_gfx_mapped; static inline int needs_idle_maps(void) { +#ifdef CONFIG_INTEL_IOMMU const unsigned short gpu_devid = intel_private.pcidev->device; + extern int intel_iommu_gfx_mapped; /* Query intel_iommu to see if we need the workaround. Presumably that * was loaded first. @@ -1198,7 +1199,7 @@ static inline int needs_idle_maps(void) gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG) && intel_iommu_gfx_mapped) return 1; - +#endif return 0; } -- cgit v1.2.1 From 14660ccd599dc7bd6ecef17408bd76dc853f9b77 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 31 Oct 2011 23:16:21 -0700 Subject: drm/i915: Fix object refcount leak on mmappable size limit error path. I've been seeing memory leaks on my system in the form of large (300-400MB) GEM objects created by now-dead processes laying around clogging up memory. I usually notice when it gets to about 1.2GB of them. Hopefully this clears up the issue, but I just found this bug by inspection. Signed-off-by: Eric Anholt Cc: stable@kernel.org Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6651c36b6e8a..d18b07adcffa 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1396,7 +1396,7 @@ i915_gem_mmap_gtt(struct drm_file *file, if (obj->base.size > dev_priv->mm.gtt_mappable_end) { ret = -E2BIG; - goto unlock; + goto out; } if (obj->madv != I915_MADV_WILLNEED) { -- cgit v1.2.1 From 2c2dd6ac738d8a22def46e073fb7383cac8fa180 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 12 Oct 2011 13:09:53 -0300 Subject: [media] media: vb2: add a check for uninitialized buffer __buffer_in_use() might be called for empty/uninitialized buffer in the following scenario: REQBUF(n, USER_PTR), QUERYBUF(). This patch fixes kernel ops in such case. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park CC: Pawel Osciak Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf2-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c index 979e544388cb..9bb92145ad5a 100644 --- a/drivers/media/video/videobuf2-core.c +++ b/drivers/media/video/videobuf2-core.c @@ -296,14 +296,14 @@ static bool __buffer_in_use(struct vb2_queue *q, struct vb2_buffer *vb) { unsigned int plane; for (plane = 0; plane < vb->num_planes; ++plane) { + void *mem_priv = vb->planes[plane].mem_priv; /* * If num_users() has not been provided, call_memop * will return 0, apparently nobody cares about this * case anyway. If num_users() returns more than 1, * we are not the only user of the plane's memory. */ - if (call_memop(q, plane, num_users, - vb->planes[plane].mem_priv) > 1) + if (mem_priv && call_memop(q, plane, num_users, mem_priv) > 1) return true; } return false; -- cgit v1.2.1 From 4907602f85d454c127d20ac943ead13e2919898d Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 13 Oct 2011 07:07:24 -0300 Subject: [media] media: vb2: set buffer length correctly for all buffer types v4l2_planes[plane].length field was not initialized for userptr buffers. This patch fixes this issue. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park CC: Pawel Osciak Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf2-core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c index 9bb92145ad5a..e7c52ff3c761 100644 --- a/drivers/media/video/videobuf2-core.c +++ b/drivers/media/video/videobuf2-core.c @@ -131,6 +131,7 @@ static void __setup_offsets(struct vb2_queue *q, unsigned int n) continue; for (plane = 0; plane < vb->num_planes; ++plane) { + vb->v4l2_planes[plane].length = q->plane_sizes[plane]; vb->v4l2_planes[plane].m.mem_offset = off; dprintk(3, "Buffer %d, plane %d offset 0x%08lx\n", -- cgit v1.2.1 From bd50d999d4d4f311fda9b777d1e567433cc0f142 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 25 Oct 2011 03:07:59 -0300 Subject: [media] media: vb2: reset queued list on REQBUFS(0) call Queued list was not reset on REQBUFS(0) call. This caused to enqueue a freed buffer to the driver. Reported-by: Angela Wan Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf2-core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c index e7c52ff3c761..95a3f5e82aef 100644 --- a/drivers/media/video/videobuf2-core.c +++ b/drivers/media/video/videobuf2-core.c @@ -265,6 +265,7 @@ static void __vb2_queue_free(struct vb2_queue *q, unsigned int buffers) q->num_buffers -= buffers; if (!q->num_buffers) q->memory = 0; + INIT_LIST_HEAD(&q->queued_list); } /** -- cgit v1.2.1 From 43defb118247b9c72d53328aa366bdb154d5ee98 Mon Sep 17 00:00:00 2001 From: Kamil Debski Date: Thu, 6 Oct 2011 11:34:05 -0300 Subject: [media] v4l: s5p-mfc: fix reported capabilities MFC uses the multi-plane API, but it reported single-plane when querying capabilities. Signed-off-by: Kamil Debski Signed-off-by: Kyungmin Park Signed-off-by: Marek Szyprowski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/s5p-mfc/s5p_mfc_dec.c | 4 ++-- drivers/media/video/s5p-mfc/s5p_mfc_enc.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c index 725634d9736d..844a4d7797bc 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c +++ b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c @@ -220,8 +220,8 @@ static int vidioc_querycap(struct file *file, void *priv, strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1); cap->bus_info[0] = 0; cap->version = KERNEL_VERSION(1, 0, 0); - cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT - | V4L2_CAP_STREAMING; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE_MPLANE | + V4L2_CAP_VIDEO_OUTPUT_MPLANE | V4L2_CAP_STREAMING; return 0; } diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c index ecef127dbc66..1e8cdb77d4b8 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c +++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c @@ -785,8 +785,8 @@ static int vidioc_querycap(struct file *file, void *priv, strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1); cap->bus_info[0] = 0; cap->version = KERNEL_VERSION(1, 0, 0); - cap->capabilities = V4L2_CAP_VIDEO_CAPTURE - | V4L2_CAP_VIDEO_OUTPUT + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE_MPLANE + | V4L2_CAP_VIDEO_OUTPUT_MPLANE | V4L2_CAP_STREAMING; return 0; } -- cgit v1.2.1 From b36b505965e374b284166c2e6b9c1d369d663ea9 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 24 Oct 2011 05:03:27 -0300 Subject: [media] v4l2-event: Deny subscribing with a type of V4L2_EVENT_ALL Signed-off-by: Hans de Goede Acked-by: Laurent Pinchart Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-event.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/v4l2-event.c b/drivers/media/video/v4l2-event.c index 53b190cf225e..9f56f18d509f 100644 --- a/drivers/media/video/v4l2-event.c +++ b/drivers/media/video/v4l2-event.c @@ -215,6 +215,9 @@ int v4l2_event_subscribe(struct v4l2_fh *fh, unsigned long flags; unsigned i; + if (sub->type == V4L2_EVENT_ALL) + return -EINVAL; + if (elems < 1) elems = 1; if (sub->type == V4L2_EVENT_CTRL) { -- cgit v1.2.1 From 78c87e863bb3350426fecd14912fd0a546c58ec0 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 26 Oct 2011 05:40:27 -0300 Subject: [media] v4l2-event: Remove pending events from fh event queue when unsubscribing The kev pointers inside the pending events queue (the available queue) of the fh point to data inside the sev, unsubscribing frees the sev, thus making these pointers point to freed memory! This patch fixes these dangling pointers in the available queue by removing all matching pending events on unsubscription. Signed-off-by: Hans de Goede Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-event.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/v4l2-event.c b/drivers/media/video/v4l2-event.c index 9f56f18d509f..4d01f17497f6 100644 --- a/drivers/media/video/v4l2-event.c +++ b/drivers/media/video/v4l2-event.c @@ -285,6 +285,7 @@ int v4l2_event_unsubscribe(struct v4l2_fh *fh, { struct v4l2_subscribed_event *sev; unsigned long flags; + int i; if (sub->type == V4L2_EVENT_ALL) { v4l2_event_unsubscribe_all(fh); @@ -295,6 +296,11 @@ int v4l2_event_unsubscribe(struct v4l2_fh *fh, sev = v4l2_event_subscribed(fh, sub->type, sub->id); if (sev != NULL) { + /* Remove any pending events for this subscription */ + for (i = 0; i < sev->in_use; i++) { + list_del(&sev->events[sev_pos(sev, i)].list); + fh->navailable--; + } list_del(&sev->list); sev->fh = NULL; } -- cgit v1.2.1 From e3e72f39b68ec2563d8ef22f9704a66b7f71b638 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 26 Oct 2011 05:52:47 -0300 Subject: [media] v4l2-event: Don't set sev->fh to NULL on unsubscribe Setting sev->fh to NULL causes problems for the del op added in the next patch of this series, since this op needs a way to get to its own data structures, and typically this will be done by using container_of on an embedded v4l2_fh struct. The reason the original code is setting sev->fh to NULL is to signal to users of the event framework that the unsubscription has happened, but since their is no shared lock between the event framework and users of it, this is inherently racy, and it also turns out to be unnecessary as long as both the event framework and the user of the framework do their own locking properly and the user guarantees that it holds no references to the subcribed_event structure after its del operation has been called. This is best explained by looking at the only code currently checking for sev->fh being set to NULL on unsubscribe, which is the v4l2-ctrls.c send_event function. Here is the relevant code from v4l2-ctrls: send_event(): if (sev->fh && (sev->fh != fh || (sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK))) v4l2_event_queue_fh(sev->fh, &ev); Now lets say that v4l2_event_unsubscribe and v4l2-ctrls: send_event() race on the same sev, then the following could happens: 1) send_event checks sev->fh, finds it is not NULL 2) v4l2_event_unsubscribe sets sev->fh NULL 3) v4l2_event_unsubscribe calls v4l2_ctrls del_event function, this blocks as the thread calling send_event holds the ctrl_lock 4) send_event calls v4l2_event_queue_fh(sev->fh, &ev) which not is equivalent to calling: v4l2_event_queue_fh(NULL, &ev) 5) oops, NULL pointer deref. Now again without setting sev->fh to NULL in v4l2_event_unsubscribe and without the (now senseless since always true) sev->fh != NULL check in 1) send_event is about to call v4l2_event_queue_fh(sev->fh, &ev) 2) v4l2_event_unsubscribe removes sev->list from the fh->subscribed list 3) send_event calls v4l2_event_queue_fh(sev->fh, &ev) 4) v4l2_event_queue_fh blocks on the fh_lock spinlock 5) v4l2_event_unsubscribe unlocks the fh_lock spinlock 6) v4l2_event_unsubscribe calls v4l2_ctrls del_event function, this blocks as the thread calling send_event holds the ctrl_lock 8) v4l2_event_queue_fh takes the fh_lock 7) v4l2_event_queue_fh calls v4l2_event_subscribed, does not find it since sev->list has been removed from fh->subscribed already -> does nothing 9) v4l2_event_queue_fh releases the fh_lock 10) the caller of send_event releases the ctrl lock (mutex) 11) v4l2_ctrls del_event takes the ctrl lock 12) v4l2_ctrls del_event removes sev->node from the ev_subs list 13) v4l2_ctrls del_event releases the ctrl lock 14) v4l2_event_unsubscribe frees the sev, to which no references are being held anymore Signed-off-by: Hans de Goede Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ctrls.c | 4 ++-- drivers/media/video/v4l2-event.c | 1 - 2 files changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c index 5552f8137571..c58c91bbcfbd 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/video/v4l2-ctrls.c @@ -820,8 +820,8 @@ static void send_event(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, u32 changes) fill_event(&ev, ctrl, changes); list_for_each_entry(sev, &ctrl->ev_subs, node) - if (sev->fh && (sev->fh != fh || - (sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK))) + if (sev->fh != fh || + (sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK)) v4l2_event_queue_fh(sev->fh, &ev); } diff --git a/drivers/media/video/v4l2-event.c b/drivers/media/video/v4l2-event.c index 4d01f17497f6..3d93251f292e 100644 --- a/drivers/media/video/v4l2-event.c +++ b/drivers/media/video/v4l2-event.c @@ -302,7 +302,6 @@ int v4l2_event_unsubscribe(struct v4l2_fh *fh, fh->navailable--; } list_del(&sev->list); - sev->fh = NULL; } spin_unlock_irqrestore(&fh->vdev->fh_lock, flags); -- cgit v1.2.1 From 1249a3a82d08d73ece65ae79e0553cd0f3407a15 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 31 Oct 2011 11:16:44 -0300 Subject: [media] v4l2-ctrl: Send change events to all fh for auto cluster slave controls Otherwise the fh changing the master control won't get the inactive state change event for the slave controls. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ctrls.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c index c58c91bbcfbd..2ece7093b513 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/video/v4l2-ctrls.c @@ -946,6 +946,7 @@ static void new_to_cur(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, if (ctrl->cluster[0]->has_volatiles) ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE; } + fh = NULL; } if (changed || update_inactive) { /* If a control was changed that was not one of the controls -- cgit v1.2.1 From 08f2e6312c67fed80df9342e06ad36daf11eb80b Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 8 Nov 2011 18:29:15 +0800 Subject: iommu: omap: Fix compile failure Fix compile failure in drivers/iommu/omap-iommu-debug.c because of missing module.h include. Signed-off-by: Ming Lei Signed-off-by: Joerg Roedel --- drivers/iommu/omap-iommu-debug.c | 1 + drivers/iommu/omap-iovmm.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/iommu/omap-iommu-debug.c b/drivers/iommu/omap-iommu-debug.c index 9c192e79f806..288da5c1499d 100644 --- a/drivers/iommu/omap-iommu-debug.c +++ b/drivers/iommu/omap-iommu-debug.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include diff --git a/drivers/iommu/omap-iovmm.c b/drivers/iommu/omap-iovmm.c index e8fdb8830f69..46be456fcc00 100644 --- a/drivers/iommu/omap-iovmm.c +++ b/drivers/iommu/omap-iovmm.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include -- cgit v1.2.1 From a8d12007c795f3d69ee0b2d29f0abfefd55c6120 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 8 Nov 2011 18:02:10 +0000 Subject: n_gsm: Fix timings Alek Du reported that the code erroneously applies time to jiffies conversions twice to the t1 and t2 values. In normal use on a modem link this cases no visible problem but on a slower link it will break as with HZ=1000 as is typical we are running t1/t2 ten times too fast. Alek's original patch removed the conversion from the timer setting but we in fact have to be more careful as the contents of t1/t2 are visible via the device API and we thus need to correct the constants. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/tty/n_gsm.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 4cb0d0a3e57b..fc7bbba585ce 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -66,14 +66,16 @@ static int debug; module_param(debug, int, 0600); -#define T1 (HZ/10) -#define T2 (HZ/3) -#define N2 3 +/* Defaults: these are from the specification */ + +#define T1 10 /* 100mS */ +#define T2 34 /* 333mS */ +#define N2 3 /* Retry 3 times */ /* Use long timers for testing at low speed with debug on */ #ifdef DEBUG_TIMING -#define T1 HZ -#define T2 (2 * HZ) +#define T1 100 +#define T2 200 #endif /* -- cgit v1.2.1 From 6aec187a90aeb883533c9180e2acac1e54c87f7d Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Tue, 8 Nov 2011 14:56:50 -0500 Subject: drivers/media: video/a5k6aa is a module and so needs module.h This file uses core functions like module_init() and module_exit() and so it explicitly needs to include the module.h header. Signed-off-by: Paul Gortmaker --- drivers/media/video/s5k6aa.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/video/s5k6aa.c b/drivers/media/video/s5k6aa.c index 2446736b7871..0df7f2a41814 100644 --- a/drivers/media/video/s5k6aa.c +++ b/drivers/media/video/s5k6aa.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include -- cgit v1.2.1 From b9c913f327ccc5cf422b6dc9b5acfbc9b86e7b62 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 8 Nov 2011 12:17:25 -0800 Subject: x86 platform drivers: make Dell laptop driver select needed LED support Otherwise we get compile errors like this: ERROR: "led_classdev_unregister" [drivers/platform/x86/dell-laptop.ko] undefined! ERROR: "led_classdev_register" [drivers/platform/x86/dell-laptop.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 when the dell-laptop support is enabled without the necessary LED support being enabled. Reported-by: Alessandro Suardi Acked-by: Matthew Garrett Signed-off-by: Linus Torvalds --- drivers/platform/x86/Kconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index f4e3d82379d7..598d5b82a6bc 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -85,6 +85,8 @@ config DELL_LAPTOP depends on RFKILL || RFKILL = n depends on POWER_SUPPLY depends on SERIO_I8042 + select LEDS_CLASS + select NEW_LEDS default n ---help--- This driver adds support for rfkill and backlight control to Dell -- cgit v1.2.1 From dccefb3729c8c2b17e45c68cdc0d575f2473a5f0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 8 Nov 2011 12:49:29 -0800 Subject: x86 platform drivers: add POWER_SUPPLY to selected drivers for Dell The Kconfig loop detection goes crazy without this. Signed-off-by: Linus Torvalds --- drivers/platform/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 598d5b82a6bc..7f43cf86d776 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -83,8 +83,8 @@ config DELL_LAPTOP depends on EXPERIMENTAL depends on BACKLIGHT_CLASS_DEVICE depends on RFKILL || RFKILL = n - depends on POWER_SUPPLY depends on SERIO_I8042 + select POWER_SUPPLY select LEDS_CLASS select NEW_LEDS default n -- cgit v1.2.1 From 156acb166ea9a43d7fcdf9b8051694ce4e91dbfc Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Tue, 8 Nov 2011 22:34:00 +0100 Subject: PM / OPP: Use ERR_CAST instead of ERR_PTR(PTR_ERR()) Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) [The semantic patch that makes this change is available in scripts/coccinelle/api/err_cast.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/] Signed-off-by: Thomas Meyer Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 434a6c011675..95706fa24c73 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -669,7 +669,7 @@ struct srcu_notifier_head *opp_get_notifier(struct device *dev) struct device_opp *dev_opp = find_device_opp(dev); if (IS_ERR(dev_opp)) - return ERR_PTR(PTR_ERR(dev_opp)); /* matching type */ + return ERR_CAST(dev_opp); /* matching type */ return &dev_opp->head; } -- cgit v1.2.1 From 3ec7215e5d1a714ef65069a1d0999a31e4930bb7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 25 May 2011 21:40:59 +0200 Subject: ide-{cd,floppy,tape}: Do not include MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The top of has this comment: * Please do not include this file in generic code. There is currently * no requirement for any architecture to implement anything held * within this file. * * Thanks. --rmk Remove inclusion of , to prevent the following compile error from happening soon: | include/linux/irq.h:132: error: redefinition of ‘struct irq_data’ | include/linux/irq.h:286: error: redefinition of ‘struct irq_chip’ Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner Acked-by: Borislav Petkov Cc: linux-ide@vger.kernel.org --- drivers/ide/ide-cd.c | 1 - drivers/ide/ide-floppy.c | 1 - drivers/ide/ide-tape.c | 1 - 3 files changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 04b09564bfa9..8126824daccb 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -43,7 +43,6 @@ /* For SCSI -> ATAPI command conversion */ #include -#include #include #include #include diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 61fdf544fbd6..3d42043fec51 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -35,7 +35,6 @@ #include #include -#include #include #include #include diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 7ecb1ade8874..ce8237d36159 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -41,7 +41,6 @@ #include #include -#include #include #include #include -- cgit v1.2.1 From 5a2394534b160ce18f9a705cf9de40e77648f8a2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Jul 2011 22:33:13 +0200 Subject: m68k/irq: Remove obsolete IRQ_FLG_* users The m68k core irq code stopped honoring these flags during the irq restructuring in 2006. Signed-off-by: Geert Uytterhoeven --- drivers/macintosh/via-macii.c | 2 +- drivers/macintosh/via-maciisi.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/macintosh/via-macii.c b/drivers/macintosh/via-macii.c index 817f37a875c9..c9570fcf1cce 100644 --- a/drivers/macintosh/via-macii.c +++ b/drivers/macintosh/via-macii.c @@ -159,7 +159,7 @@ int macii_init(void) err = macii_init_via(); if (err) goto out; - err = request_irq(IRQ_MAC_ADB, macii_interrupt, IRQ_FLG_LOCK, "ADB", + err = request_irq(IRQ_MAC_ADB, macii_interrupt, 0, "ADB", macii_interrupt); if (err) goto out; diff --git a/drivers/macintosh/via-maciisi.c b/drivers/macintosh/via-maciisi.c index 9ab5b0c34f0d..34d02a91b29f 100644 --- a/drivers/macintosh/via-maciisi.c +++ b/drivers/macintosh/via-maciisi.c @@ -122,8 +122,8 @@ maciisi_init(void) return err; } - if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, IRQ_FLG_LOCK | IRQ_FLG_FAST, - "ADB", maciisi_interrupt)) { + if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, 0, "ADB", + maciisi_interrupt)) { printk(KERN_ERR "maciisi_init: can't get irq %d\n", IRQ_MAC_ADB); return -EAGAIN; } -- cgit v1.2.1 From 6d2dd054295e26dad0a84e2fe2029a1428242f8b Mon Sep 17 00:00:00 2001 From: Marcos Paulo de Souza Date: Mon, 31 Oct 2011 23:50:16 -0200 Subject: [libata] libata-scsi.c: Add function parameter documentation Add the documentation of parameters of ata_change_queue_depth to silence the warning of make xmldocs Signed-off-by: Marcos paulo de Souza Acked-by: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 72a9770ac42f..2a5412e7e9c1 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1217,6 +1217,10 @@ void ata_scsi_slave_destroy(struct scsi_device *sdev) /** * __ata_change_queue_depth - helper for ata_scsi_change_queue_depth + * @ap: ATA port to which the device change the queue depth + * @sdev: SCSI device to configure queue depth for + * @queue_depth: new queue depth + * @reason: calling context * * libsas and libata have different approaches for associating a sdev to * its ata_port. -- cgit v1.2.1 From 003456145f0d23b73f080abd1fd7981788438693 Mon Sep 17 00:00:00 2001 From: JiSheng Zhang Date: Mon, 31 Oct 2011 21:20:10 +0800 Subject: ahci_platform: use dev_get_platdata() Use dev_get_platdata() to retrieve the struct ahci_platform_data data from the platform. Signed-off-by: JiSheng Zhang Signed-off-by: Jeff Garzik --- drivers/ata/ahci_platform.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 004f2ce3dc73..ec555951176e 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -65,7 +65,7 @@ static struct scsi_host_template ahci_platform_sht = { static int __init ahci_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct ahci_platform_data *pdata = dev->platform_data; + struct ahci_platform_data *pdata = dev_get_platdata(dev); const struct platform_device_id *id = platform_get_device_id(pdev); struct ata_port_info pi = ahci_port_info[id->driver_data]; const struct ata_port_info *ppi[] = { &pi, NULL }; @@ -191,7 +191,7 @@ err0: static int __devexit ahci_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct ahci_platform_data *pdata = dev->platform_data; + struct ahci_platform_data *pdata = dev_get_platdata(dev); struct ata_host *host = dev_get_drvdata(dev); ata_host_detach(host); -- cgit v1.2.1 From 142924cf402f9c0568004f0e2a27988fe3556c61 Mon Sep 17 00:00:00 2001 From: Chris Dunlop Date: Mon, 24 Oct 2011 10:38:18 +1100 Subject: sata_sis.c: trivial spelling fix Trivial spelling fix. Signed-off-by: Chris Dunlop Signed-off-by: Jeff Garzik --- drivers/ata/sata_sis.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c index 447d9c05fb5a..95ec435f0eb4 100644 --- a/drivers/ata/sata_sis.c +++ b/drivers/ata/sata_sis.c @@ -104,7 +104,7 @@ static const struct ata_port_info sis_port_info = { }; MODULE_AUTHOR("Uwe Koziolek"); -MODULE_DESCRIPTION("low-level driver for Silicon Integratad Systems SATA controller"); +MODULE_DESCRIPTION("low-level driver for Silicon Integrated Systems SATA controller"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, sis_pci_tbl); MODULE_VERSION(DRV_VERSION); -- cgit v1.2.1 From 7a46c0780babea7d0b3f277a33ea243be38eb942 Mon Sep 17 00:00:00 2001 From: Gwendal Grignou Date: Wed, 19 Oct 2011 17:17:02 -0700 Subject: [libata] Issue SRST to Sil3726 PMP Reenable sending SRST to devices connected behind a Sil3726 PMP. This allow staggered spinups and handles drives that spins up slowly. While the drives spin up, the PMP will not accept SRST. Most controller reissues the reset until the drive is ready, while some [Sil3124] returns an error. In ata_eh_error, wait 10s before reset the ATA port and try again. Signed-off-by: Gwendal Grignou Acked-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 12 +++++++++++- drivers/ata/libata-pmp.c | 7 ++----- 2 files changed, 13 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index f22957c2769a..a9b282038000 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2883,7 +2883,7 @@ int ata_eh_reset(struct ata_link *link, int classify, sata_scr_read(link, SCR_STATUS, &sstatus)) rc = -ERESTART; - if (rc == -ERESTART || try >= max_tries) { + if (try >= max_tries) { /* * Thaw host port even if reset failed, so that the port * can be retried on the next phy event. This risks @@ -2909,6 +2909,16 @@ int ata_eh_reset(struct ata_link *link, int classify, ata_eh_acquire(ap); } + /* + * While disks spinup behind PMP, some controllers fail sending SRST. + * They need to be reset - as well as the PMP - before retrying. + */ + if (rc == -ERESTART) { + if (ata_is_host_link(link)) + ata_eh_thaw_port(ap); + goto out; + } + if (try == max_tries - 1) { sata_down_spd_limit(link, 0); if (slave) diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 104462dbc524..21b80c555c60 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -389,12 +389,9 @@ static void sata_pmp_quirks(struct ata_port *ap) /* link reports offline after LPM */ link->flags |= ATA_LFLAG_NO_LPM; - /* Class code report is unreliable and SRST - * times out under certain configurations. - */ + /* Class code report is unreliable. */ if (link->pmp < 5) - link->flags |= ATA_LFLAG_NO_SRST | - ATA_LFLAG_ASSUME_ATA; + link->flags |= ATA_LFLAG_ASSUME_ATA; /* port 5 is for SEMB device and it doesn't like SRST */ if (link->pmp == 5) -- cgit v1.2.1 From c9703765f3d5ab27909011dee4a05affe48e4442 Mon Sep 17 00:00:00 2001 From: Keng-Yu Lin Date: Wed, 9 Nov 2011 01:47:36 -0500 Subject: [libata] ahci: Add ASMedia ASM1061 support Signed-off-by: Keng-Yu Lin Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index fb7b90b05922..cf26222a93c5 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -390,6 +390,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { /* Promise */ { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ + /* Asmedia */ + { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1061 */ + /* Generic, PCI class code for AHCI */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci }, -- cgit v1.2.1 From 1cb201af626eedf0ff78cc1712c731b463994c60 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 4 Nov 2011 01:20:21 +0800 Subject: atmel/spi: fix missing probe Commit 940ab889 "drivercore: Add helper macro for platform_driver boilerplate" converted this driver to use module_platform_driver, but due to the use of platform_driver_probe(), this resulted in the call to atmel_spi_probe being lost. Place the call to this function into the driver structure. fix section missmatch atmel_spi_probe is marked __init where it's supposed to be __devinit atmel_spi_remove is marked __exit where it's supposed to be __devexit Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Greg Kroah-Hartman Cc: Grant Likely Cc: Russell King - ARM Linux Acked-by: Nicolas Ferre --- drivers/spi/spi-atmel.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 79665e2e6ec5..16d6a839c7fa 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -907,7 +907,7 @@ static void atmel_spi_cleanup(struct spi_device *spi) /*-------------------------------------------------------------------------*/ -static int __init atmel_spi_probe(struct platform_device *pdev) +static int __devinit atmel_spi_probe(struct platform_device *pdev) { struct resource *regs; int irq; @@ -1003,7 +1003,7 @@ out_free: return ret; } -static int __exit atmel_spi_remove(struct platform_device *pdev) +static int __devexit atmel_spi_remove(struct platform_device *pdev) { struct spi_master *master = platform_get_drvdata(pdev); struct atmel_spi *as = spi_master_get_devdata(master); @@ -1072,6 +1072,7 @@ static struct platform_driver atmel_spi_driver = { }, .suspend = atmel_spi_suspend, .resume = atmel_spi_resume, + .probe = atmel_spi_probe, .remove = __exit_p(atmel_spi_remove), }; module_platform_driver(atmel_spi_driver); -- cgit v1.2.1 From bde4889aaa2d59c1febfeadd7f690be0ed143ed5 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 4 Jul 2011 12:52:27 +1000 Subject: drm: make sure drm_vblank_init() has been called before touching vbl_lock Signed-off-by: Ben Skeggs --- drivers/gpu/drm/drm_irq.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index cb3794a00f98..4d3760c63964 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -407,13 +407,16 @@ int drm_irq_uninstall(struct drm_device *dev) /* * Wake up any waiters so they don't hang. */ - spin_lock_irqsave(&dev->vbl_lock, irqflags); - for (i = 0; i < dev->num_crtcs; i++) { - DRM_WAKEUP(&dev->vbl_queue[i]); - dev->vblank_enabled[i] = 0; - dev->last_vblank[i] = dev->driver->get_vblank_counter(dev, i); + if (dev->num_crtcs) { + spin_lock_irqsave(&dev->vbl_lock, irqflags); + for (i = 0; i < dev->num_crtcs; i++) { + DRM_WAKEUP(&dev->vbl_queue[i]); + dev->vblank_enabled[i] = 0; + dev->last_vblank[i] = + dev->driver->get_vblank_counter(dev, i); + } + spin_unlock_irqrestore(&dev->vbl_lock, irqflags); } - spin_unlock_irqrestore(&dev->vbl_lock, irqflags); if (!irq_enabled) return -EINVAL; -- cgit v1.2.1 From 46b348865011bf0d706fe1ec8c9cef08cf86ad40 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 22 Sep 2011 12:51:31 +1000 Subject: drm/nouveau: fix oops if i2c bus not found in nouveau_i2c_identify() Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_i2c.c b/drivers/gpu/drm/nouveau/nouveau_i2c.c index c6143df48b9f..d39b2202b197 100644 --- a/drivers/gpu/drm/nouveau/nouveau_i2c.c +++ b/drivers/gpu/drm/nouveau/nouveau_i2c.c @@ -333,7 +333,7 @@ nouveau_i2c_identify(struct drm_device *dev, const char *what, NV_DEBUG(dev, "Probing %ss on I2C bus: %d\n", what, index); - for (i = 0; info[i].addr; i++) { + for (i = 0; i2c && info[i].addr; i++) { if (nouveau_probe_i2c_addr(i2c, info[i].addr) && (!match || match(i2c, &info[i]))) { NV_INFO(dev, "Detected %s: %s\n", what, info[i].type); -- cgit v1.2.1 From ee9f7ef99f4422463634c075b22197c22c5cfa71 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 23 Sep 2011 15:37:38 +1000 Subject: drm/nv50/bios: fixup mpll programming from the init table parser Reportedly this has been causing stability and corruption issues after resuming from suspend for a few people. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bios.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 032a82098136..5fc201b49d30 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -640,10 +640,9 @@ static int nv50_pll_set(struct drm_device *dev, uint32_t reg, uint32_t clk) { struct drm_nouveau_private *dev_priv = dev->dev_private; - uint32_t reg0 = nv_rd32(dev, reg + 0); - uint32_t reg1 = nv_rd32(dev, reg + 4); struct nouveau_pll_vals pll; struct pll_lims pll_limits; + u32 ctrl, mask, coef; int ret; ret = get_pll_limits(dev, reg, &pll_limits); @@ -654,15 +653,20 @@ nv50_pll_set(struct drm_device *dev, uint32_t reg, uint32_t clk) if (!clk) return -ERANGE; - reg0 = (reg0 & 0xfff8ffff) | (pll.log2P << 16); - reg1 = (reg1 & 0xffff0000) | (pll.N1 << 8) | pll.M1; - - if (dev_priv->vbios.execute) { - still_alive(); - nv_wr32(dev, reg + 4, reg1); - nv_wr32(dev, reg + 0, reg0); + coef = pll.N1 << 8 | pll.M1; + ctrl = pll.log2P << 16; + mask = 0x00070000; + if (reg == 0x004008) { + mask |= 0x01f80000; + ctrl |= (pll_limits.log2p_bias << 19); + ctrl |= (pll.log2P << 22); } + if (!dev_priv->vbios.execute) + return 0; + + nv_mask(dev, reg + 0, mask, ctrl); + nv_wr32(dev, reg + 4, coef); return 0; } -- cgit v1.2.1 From dce411cdf60eb64638443f953b52c18192378305 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 29 Sep 2011 13:15:17 +1000 Subject: drm/nv50/gr: typo fix, how about we not reset fifo during graph init? Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_graph.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nv50_graph.c b/drivers/gpu/drm/nouveau/nv50_graph.c index 8c979b31ff61..ac601f7c4e1a 100644 --- a/drivers/gpu/drm/nouveau/nv50_graph.c +++ b/drivers/gpu/drm/nouveau/nv50_graph.c @@ -131,8 +131,8 @@ nv50_graph_init(struct drm_device *dev, int engine) NV_DEBUG(dev, "\n"); /* master reset */ - nv_mask(dev, 0x000200, 0x00200100, 0x00000000); - nv_mask(dev, 0x000200, 0x00200100, 0x00200100); + nv_mask(dev, 0x000200, 0x00201000, 0x00000000); + nv_mask(dev, 0x000200, 0x00201000, 0x00201000); nv_wr32(dev, 0x40008c, 0x00000004); /* HW_CTX_SWITCH_ENABLED */ /* reset/enable traps and interrupts */ -- cgit v1.2.1 From 7b4b98fa0c4d3a975b36bfe9984e4cd117f2ddff Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 7 Oct 2011 16:00:31 +1000 Subject: drm/nv50/vram: fix incorrect detection of bank count on newer chipsets NVA3+ has an extra bit here compared to NV50:NVA3 chipsets. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_vram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nv50_vram.c b/drivers/gpu/drm/nouveau/nv50_vram.c index 9da23838e63e..2e45e57fd869 100644 --- a/drivers/gpu/drm/nouveau/nv50_vram.c +++ b/drivers/gpu/drm/nouveau/nv50_vram.c @@ -160,7 +160,7 @@ nv50_vram_rblock(struct drm_device *dev) colbits = (r4 & 0x0000f000) >> 12; rowbitsa = ((r4 & 0x000f0000) >> 16) + 8; rowbitsb = ((r4 & 0x00f00000) >> 20) + 8; - banks = ((r4 & 0x01000000) ? 8 : 4); + banks = 1 << (((r4 & 0x03000000) >> 24) + 2); rowsize = parts * banks * (1 << colbits) * 8; predicted = rowsize << rowbitsa; -- cgit v1.2.1 From 5e60ee780e792efe6dce97eceb110b1d30bab850 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Fri, 9 Sep 2011 14:16:42 +0200 Subject: drm/nouveau: initialize chan->fence.lock before use Fence lock needs to be initialized before any call to nouveau_channel_put because it calls nouveau_channel_idle->nouveau_fence_update which uses fence lock. BUG: spinlock bad magic on CPU#0, test/24134 lock: ffff88019f90dba8, .magic: 00000000, .owner: /-1, .owner_cpu: 0 Pid: 24134, comm: test Not tainted 3.0.0-nv+ #800 Call Trace: spin_bug+0x9c/0xa3 do_raw_spin_lock+0x29/0x13c _raw_spin_lock+0x1e/0x22 nouveau_fence_update+0x2d/0xf1 nouveau_channel_idle+0x22/0xa0 nouveau_channel_put_unlocked+0x84/0x1bd nouveau_channel_put+0x20/0x24 nouveau_channel_alloc+0x4ec/0x585 nouveau_ioctl_fifo_alloc+0x50/0x130 drm_ioctl+0x289/0x361 do_vfs_ioctl+0x4dd/0x52c sys_ioctl+0x42/0x65 system_call_fastpath+0x16/0x1b It's easily triggerable from userspace. Additionally remove double initialization of chan->fence.pending. Signed-off-by: Marcin Slusarz Cc: stable@kernel.org Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_channel.c | 1 + drivers/gpu/drm/nouveau/nouveau_fence.c | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c index a319d5646ea9..bb6ec9ef8676 100644 --- a/drivers/gpu/drm/nouveau/nouveau_channel.c +++ b/drivers/gpu/drm/nouveau/nouveau_channel.c @@ -158,6 +158,7 @@ nouveau_channel_alloc(struct drm_device *dev, struct nouveau_channel **chan_ret, INIT_LIST_HEAD(&chan->nvsw.vbl_wait); INIT_LIST_HEAD(&chan->nvsw.flip); INIT_LIST_HEAD(&chan->fence.pending); + spin_lock_init(&chan->fence.lock); /* setup channel's memory and vm */ ret = nouveau_gpuobj_channel_init(chan, vram_handle, gart_handle); diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c b/drivers/gpu/drm/nouveau/nouveau_fence.c index 81116cfea275..2f6daae68b9d 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fence.c +++ b/drivers/gpu/drm/nouveau/nouveau_fence.c @@ -539,8 +539,6 @@ nouveau_fence_channel_init(struct nouveau_channel *chan) return ret; } - INIT_LIST_HEAD(&chan->fence.pending); - spin_lock_init(&chan->fence.lock); atomic_set(&chan->fence.last_sequence_irq, 0); return 0; } -- cgit v1.2.1 From 71856abefb49bae5d67275752ada02853c16660d Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Sun, 9 Oct 2011 22:58:31 +0200 Subject: drm/nv50: fix stability issue on NV86. Confirmed to fix random hangs while running all Unegine demos on NV86. Signed-off-by: Maxim Levitsky Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_grctx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nv50_grctx.c b/drivers/gpu/drm/nouveau/nv50_grctx.c index d05c2c3b2444..4b46d6968566 100644 --- a/drivers/gpu/drm/nouveau/nv50_grctx.c +++ b/drivers/gpu/drm/nouveau/nv50_grctx.c @@ -601,7 +601,7 @@ nv50_graph_construct_mmio(struct nouveau_grctx *ctx) gr_def(ctx, offset + 0x1c, 0x00880000); break; case 0x86: - gr_def(ctx, offset + 0x1c, 0x008c0000); + gr_def(ctx, offset + 0x1c, 0x018c0000); break; case 0x92: case 0x96: -- cgit v1.2.1 From 12b6d9d881ccb64a833d53565a3579e12ab1d026 Mon Sep 17 00:00:00 2001 From: Christoph Bumiller Date: Fri, 7 Oct 2011 18:10:45 +0200 Subject: drm/nvc0/vram: storage type 0xc3 is not compressed Signed-off-by: Christoph Bumiller Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvc0_vram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvc0_vram.c b/drivers/gpu/drm/nouveau/nvc0_vram.c index edbfe9360ae2..041ff2b2b601 100644 --- a/drivers/gpu/drm/nouveau/nvc0_vram.c +++ b/drivers/gpu/drm/nouveau/nvc0_vram.c @@ -43,7 +43,7 @@ static const u8 types[256] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 3, 3, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, - 3, 3, 3, 3, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 3, 3, + 3, 3, 3, 1, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 3, 3, 3, 3, 0, 0, 0, 0, 0, 0, 3, 0, 0, 3, 0, 3, 0, 3, 3, 0, 3, 3, 3, 3, 3, 0, 0, 3, 0, 3, 0, 3, 3, 0, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 0, 1, 1, 0 -- cgit v1.2.1 From ef5ced4bfe48ba2acb16e867ceb9c473dd0ef192 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 18 Oct 2011 09:07:51 +0300 Subject: drm/nouveau: testing the wrong variable memtimings is a valid pointer here, the intent was to test for kcalloc() failure. Signed-off-by: Dan Carpenter Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_perf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_perf.c b/drivers/gpu/drm/nouveau/nouveau_perf.c index 9f178aa94162..33d03fbf00df 100644 --- a/drivers/gpu/drm/nouveau/nouveau_perf.c +++ b/drivers/gpu/drm/nouveau/nouveau_perf.c @@ -239,7 +239,7 @@ nouveau_perf_init(struct drm_device *dev) if(version == 0x15) { memtimings->timing = kcalloc(entries, sizeof(*memtimings->timing), GFP_KERNEL); - if(!memtimings) { + if (!memtimings->timing) { NV_WARN(dev,"Could not allocate memtiming table\n"); return; } -- cgit v1.2.1 From 2bfa7482224903097a50c14a4389a29f56e19c3b Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 19 Oct 2011 14:06:59 +1000 Subject: drm/nv40/pm: fix issues on igp chipsets, which don't have memory Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv40_pm.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nv40_pm.c b/drivers/gpu/drm/nouveau/nv40_pm.c index bbc0b9c7e1f7..e676b0d53478 100644 --- a/drivers/gpu/drm/nouveau/nv40_pm.c +++ b/drivers/gpu/drm/nouveau/nv40_pm.c @@ -57,12 +57,14 @@ read_pll_2(struct drm_device *dev, u32 reg) int P = (ctrl & 0x00070000) >> 16; u32 ref = 27000, clk = 0; - if (ctrl & 0x80000000) + if ((ctrl & 0x80000000) && M1) { clk = ref * N1 / M1; - - if (!(ctrl & 0x00000100)) { - if (ctrl & 0x40000000) - clk = clk * N2 / M2; + if ((ctrl & 0x40000100) == 0x40000000) { + if (M2) + clk = clk * N2 / M2; + else + clk = 0; + } } return clk >> P; @@ -177,6 +179,11 @@ nv40_pm_clocks_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl) } /* memory clock */ + if (!perflvl->memory) { + info->mpll_ctrl = 0x00000000; + goto out; + } + ret = nv40_calc_pll(dev, 0x004020, &pll, perflvl->memory, &N1, &M1, &N2, &M2, &log2P); if (ret < 0) @@ -264,6 +271,9 @@ nv40_pm_clocks_set(struct drm_device *dev, void *pre_state) mdelay(5); nv_mask(dev, 0x00c040, 0x00000333, info->ctrl); + if (!info->mpll_ctrl) + goto resume; + /* wait for vblank start on active crtcs, disable memory access */ for (i = 0; i < 2; i++) { if (!(crtc_mask & (1 << i))) -- cgit v1.2.1 From d4547ed8cc219f2e06078ac05147a873b2a03d5a Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 27 Oct 2011 11:26:17 +1000 Subject: drm/nvc0/vram: skip disabled PBFB subunits Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvc0_vram.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvc0_vram.c b/drivers/gpu/drm/nouveau/nvc0_vram.c index 041ff2b2b601..ce984d573a51 100644 --- a/drivers/gpu/drm/nouveau/nvc0_vram.c +++ b/drivers/gpu/drm/nouveau/nvc0_vram.c @@ -110,22 +110,26 @@ nvc0_vram_init(struct drm_device *dev) u32 bsize = nv_rd32(dev, 0x10f20c); u32 offset, length; bool uniform = true; - int ret, i; + int ret, part; NV_DEBUG(dev, "0x100800: 0x%08x\n", nv_rd32(dev, 0x100800)); NV_DEBUG(dev, "parts 0x%08x bcast_mem_amount 0x%08x\n", parts, bsize); /* read amount of vram attached to each memory controller */ - for (i = 0; i < parts; i++) { - u32 psize = nv_rd32(dev, 0x11020c + (i * 0x1000)); + part = 0; + while (parts) { + u32 psize = nv_rd32(dev, 0x11020c + (part++ * 0x1000)); + if (psize == 0) + continue; + parts--; + if (psize != bsize) { if (psize < bsize) bsize = psize; uniform = false; } - NV_DEBUG(dev, "%d: mem_amount 0x%08x\n", i, psize); - + NV_DEBUG(dev, "%d: mem_amount 0x%08x\n", part, psize); dev_priv->vram_size += (u64)psize << 20; } -- cgit v1.2.1 From 80859760daa01fb38497aa6326a32a16489d8c97 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 27 Oct 2011 11:31:49 +1000 Subject: drm/nvc0: enable acceleration on 0xc8 by default Worked well enough for glxgears and gnome-shell at least, no reason to have this off anymore. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_state.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 82478e0998e5..2afd5b13dc46 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -1103,7 +1103,6 @@ int nouveau_load(struct drm_device *dev, unsigned long flags) if (nouveau_noaccel == -1) { switch (dev_priv->chipset) { case 0xc1: /* known broken */ - case 0xc8: /* never tested */ NV_INFO(dev, "acceleration disabled by default, pass " "noaccel=0 to force enable\n"); dev_priv->noaccel = true; -- cgit v1.2.1 From af6d9fe5368aadd8f0f3647b38405ffcd3ed5f81 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 11 Jul 2011 15:40:43 +1000 Subject: drm/nvc0/gr: fix some bugs in grctx generation Most serious is for chips with only 1 TPC, we'd get stuck in an infinite loop. The fix here will slightly change the setup for all other chipsets too, but, it shouldn't matter too much, and this all needs figuring out and likely redone anyway. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvc0_grctx.c | 31 ++++++++++++++----------------- 1 file changed, 14 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvc0_grctx.c b/drivers/gpu/drm/nouveau/nvc0_grctx.c index dd0e6a736b3b..96b0b93d94ca 100644 --- a/drivers/gpu/drm/nouveau/nvc0_grctx.c +++ b/drivers/gpu/drm/nouveau/nvc0_grctx.c @@ -1812,6 +1812,7 @@ nvc0_grctx_generate(struct nouveau_channel *chan) /* calculate first set of magics */ memcpy(tpnr, priv->tp_nr, sizeof(priv->tp_nr)); + gpc = -1; for (tp = 0; tp < priv->tp_total; tp++) { do { gpc = (gpc + 1) % priv->gpc_nr; @@ -1861,30 +1862,26 @@ nvc0_grctx_generate(struct nouveau_channel *chan) if (1) { u32 tp_mask = 0, tp_set = 0; - u8 tpnr[GPC_MAX]; + u8 tpnr[GPC_MAX], a, b; memcpy(tpnr, priv->tp_nr, sizeof(priv->tp_nr)); for (gpc = 0; gpc < priv->gpc_nr; gpc++) tp_mask |= ((1 << priv->tp_nr[gpc]) - 1) << (gpc * 8); - gpc = -1; - for (i = 0, gpc = -1; i < 32; i++) { - int ltp = i * (priv->tp_total - 1) / 32; - - do { - gpc = (gpc + 1) % priv->gpc_nr; - } while (!tpnr[gpc]); - tp = priv->tp_nr[gpc] - tpnr[gpc]--; + for (i = 0, gpc = -1, b = -1; i < 32; i++) { + a = (i * (priv->tp_total - 1)) / 32; + if (a != b) { + b = a; + do { + gpc = (gpc + 1) % priv->gpc_nr; + } while (!tpnr[gpc]); + tp = priv->tp_nr[gpc] - tpnr[gpc]--; - tp_set |= 1 << ((gpc * 8) + tp); + tp_set |= 1 << ((gpc * 8) + tp); + } - do { - nv_wr32(dev, 0x406800 + (i * 0x20), tp_set); - tp_set ^= tp_mask; - nv_wr32(dev, 0x406c00 + (i * 0x20), tp_set); - tp_set ^= tp_mask; - } while (ltp == (++i * (priv->tp_total - 1) / 32)); - i--; + nv_wr32(dev, 0x406800 + (i * 0x20), tp_set); + nv_wr32(dev, 0x406c00 + (i * 0x20), tp_set ^ tp_mask); } } -- cgit v1.2.1 From 4c5df493eb30089ff0b8d03a50a86293f758a786 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 28 Oct 2011 10:59:45 +1000 Subject: drm/nvc1: hacky workaround to fix accel issues Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_state.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 2afd5b13dc46..9a5ab6121b8e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -579,6 +579,14 @@ nouveau_card_init(struct drm_device *dev) if (ret) goto out_display_early; + /* workaround an odd issue on nvc1 by disabling the device's + * nosnoop capability. hopefully won't cause issues until a + * better fix is found - assuming there is one... + */ + if (dev_priv->chipset == 0xc1) { + nv_mask(dev, 0x00088080, 0x00000800, 0x00000000); + } + nouveau_pm_init(dev); ret = engine->vram.init(dev); -- cgit v1.2.1 From 6688a4dd20bf774d654203a0629d454447b80502 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 28 Oct 2011 11:43:04 +1000 Subject: drm/nvc0/gr: fixup the mmio list register writes for 0xc1 Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvc0_graph.c | 41 ++++++++++++++++++++++++++++-------- 1 file changed, 32 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvc0_graph.c b/drivers/gpu/drm/nouveau/nvc0_graph.c index bbdbc51830c8..a74e501afd25 100644 --- a/drivers/gpu/drm/nouveau/nvc0_graph.c +++ b/drivers/gpu/drm/nouveau/nvc0_graph.c @@ -157,8 +157,8 @@ nvc0_graph_create_context_mmio_list(struct nouveau_channel *chan) struct nvc0_graph_priv *priv = nv_engine(chan->dev, NVOBJ_ENGINE_GR); struct nvc0_graph_chan *grch = chan->engctx[NVOBJ_ENGINE_GR]; struct drm_device *dev = chan->dev; + struct drm_nouveau_private *dev_priv = dev->dev_private; int i = 0, gpc, tp, ret; - u32 magic; ret = nouveau_gpuobj_new(dev, chan, 0x2000, 256, NVOBJ_FLAG_VM, &grch->unk408004); @@ -207,14 +207,37 @@ nvc0_graph_create_context_mmio_list(struct nouveau_channel *chan) nv_wo32(grch->mmio, i++ * 4, 0x0041880c); nv_wo32(grch->mmio, i++ * 4, 0x80000018); - magic = 0x02180000; - nv_wo32(grch->mmio, i++ * 4, 0x00405830); - nv_wo32(grch->mmio, i++ * 4, magic); - for (gpc = 0; gpc < priv->gpc_nr; gpc++) { - for (tp = 0; tp < priv->tp_nr[gpc]; tp++, magic += 0x0324) { - u32 reg = 0x504520 + (gpc * 0x8000) + (tp * 0x0800); - nv_wo32(grch->mmio, i++ * 4, reg); - nv_wo32(grch->mmio, i++ * 4, magic); + if (dev_priv->chipset != 0xc1) { + u32 magic = 0x02180000; + nv_wo32(grch->mmio, i++ * 4, 0x00405830); + nv_wo32(grch->mmio, i++ * 4, magic); + for (gpc = 0; gpc < priv->gpc_nr; gpc++) { + for (tp = 0; tp < priv->tp_nr[gpc]; tp++) { + u32 reg = TP_UNIT(gpc, tp, 0x520); + nv_wo32(grch->mmio, i++ * 4, reg); + nv_wo32(grch->mmio, i++ * 4, magic); + magic += 0x0324; + } + } + } else { + u32 magic = 0x02180000; + nv_wo32(grch->mmio, i++ * 4, 0x00405830); + nv_wo32(grch->mmio, i++ * 4, magic | 0x0000218); + nv_wo32(grch->mmio, i++ * 4, 0x004064c4); + nv_wo32(grch->mmio, i++ * 4, 0x0086ffff); + for (gpc = 0; gpc < priv->gpc_nr; gpc++) { + for (tp = 0; tp < priv->tp_nr[gpc]; tp++) { + u32 reg = TP_UNIT(gpc, tp, 0x520); + nv_wo32(grch->mmio, i++ * 4, reg); + nv_wo32(grch->mmio, i++ * 4, (1 << 28) | magic); + magic += 0x0324; + } + for (tp = 0; tp < priv->tp_nr[gpc]; tp++) { + u32 reg = TP_UNIT(gpc, tp, 0x544); + nv_wo32(grch->mmio, i++ * 4, reg); + nv_wo32(grch->mmio, i++ * 4, magic); + magic += 0x0324; + } } } -- cgit v1.2.1 From 1c77e0f7fa4b398652f8e03f125aed258fa7018e Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 28 Oct 2011 11:00:39 +1000 Subject: drm/nvc0: enable acceleration for nvc1 by default Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_state.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 9a5ab6121b8e..d8831ab42bb9 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -1110,11 +1110,13 @@ int nouveau_load(struct drm_device *dev, unsigned long flags) dev_priv->noaccel = !!nouveau_noaccel; if (nouveau_noaccel == -1) { switch (dev_priv->chipset) { - case 0xc1: /* known broken */ +#if 0 + case 0xXX: /* known broken */ NV_INFO(dev, "acceleration disabled by default, pass " "noaccel=0 to force enable\n"); dev_priv->noaccel = true; break; +#endif default: dev_priv->noaccel = false; break; -- cgit v1.2.1 From 4beb116a454867cc3a98d02d906e0f0459aefe72 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Sun, 6 Nov 2011 21:21:28 +0100 Subject: drm/nv10: Change the BO size threshold determining the memory placement range. Fixes the framebuffer memory allocation failure seen on some low-memory cards, followed by X refusing to start. https://bugs.freedesktop.org/show_bug.cgi?id=42384 Reported-by: Chris Paulson-Ellis Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 7226f419e178..7cc37e690860 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -148,7 +148,7 @@ set_placement_range(struct nouveau_bo *nvbo, uint32_t type) if (dev_priv->card_type == NV_10 && nvbo->tile_mode && (type & TTM_PL_FLAG_VRAM) && - nvbo->bo.mem.num_pages < vram_pages / 2) { + nvbo->bo.mem.num_pages < vram_pages / 4) { /* * Make sure that the color and depth buffers are handled * by independent memory controller units. Up to a 9x -- cgit v1.2.1 From 1e482f75f169861e992eb6b5602dc73a9e0b63a2 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 6 Nov 2011 20:32:04 +0100 Subject: drm/nouveau: by default use low bpp framebuffer on low memory cards Framebuffer's BPP is not that important but can waste significant part of memory on low-VRAM cards. Lower it to 8bpp on < 32MB cards and to 16bpp on 64MB cards. It can still be overridden by video= option. Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_fbcon.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 14a8627efe4d..3a4cc32b9e44 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -487,6 +487,7 @@ int nouveau_fbcon_init(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_fbdev *nfbdev; + int preferred_bpp; int ret; nfbdev = kzalloc(sizeof(struct nouveau_fbdev), GFP_KERNEL); @@ -505,7 +506,15 @@ int nouveau_fbcon_init(struct drm_device *dev) } drm_fb_helper_single_add_all_connectors(&nfbdev->helper); - drm_fb_helper_initial_config(&nfbdev->helper, 32); + + if (dev_priv->vram_size <= 32 * 1024 * 1024) + preferred_bpp = 8; + else if (dev_priv->vram_size <= 64 * 1024 * 1024) + preferred_bpp = 16; + else + preferred_bpp = 32; + + drm_fb_helper_initial_config(&nfbdev->helper, preferred_bpp); return 0; } -- cgit v1.2.1 From 5c79507b2c50ddab8f51bc692e3c0a39e3da2ad6 Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Tue, 25 Oct 2011 13:09:43 -0400 Subject: drm/nouveau: Fix bandwidth calculation for DisplayPort Ported from the equivalent fix in drm-intel-next: http://cgit.freedesktop.org/~keithp/linux/commit/?h=drm-intel-next&id=cd9dde44f47501394b9f0715b6a36a92aa74c0d0 Signed-off-by: Adam Jackson Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_connector.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index e0d275e1c96c..cea6696b1906 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -710,7 +710,7 @@ nouveau_connector_mode_valid(struct drm_connector *connector, case OUTPUT_DP: max_clock = nv_encoder->dp.link_nr; max_clock *= nv_encoder->dp.link_bw; - clock = clock * nouveau_connector_bpp(connector) / 8; + clock = clock * nouveau_connector_bpp(connector) / 10; break; default: BUG_ON(1); -- cgit v1.2.1 From 45f034ef205e5439a50d6f7e5f89add93131c0cc Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 5 Nov 2011 21:28:46 +0100 Subject: pinctrl: hide subsystem from the populace Machines that have embedded pin controllers need to select them explicitly, so why broadcast their config options to menuconfig. We provide a helpful submenu for those machines that do select it, making it possible to enable debugging for example. Reported-by: Linus Torvalds Acked-by: Stephen Warren Signed-off-by: Linus Walleij --- drivers/pinctrl/Kconfig | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index ef566443f945..e17e2f8001d2 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -2,23 +2,17 @@ # PINCTRL infrastructure and drivers # -menuconfig PINCTRL - bool "PINCTRL Support" +config PINCTRL + bool depends on EXPERIMENTAL - help - This enables the PINCTRL subsystem for controlling pins - on chip packages, for example multiplexing pins on primarily - PGA and BGA packages for systems on chip. - - If unsure, say N. if PINCTRL +menu "Pin controllers" + depends on PINCTRL + config PINMUX bool "Support pinmux controllers" - help - Say Y here if you want the pincontrol subsystem to handle pin - multiplexing drivers. config DEBUG_PINCTRL bool "Debug PINCTRL calls" @@ -30,14 +24,12 @@ config PINMUX_SIRF bool "CSR SiRFprimaII pinmux driver" depends on ARCH_PRIMA2 select PINMUX - help - Say Y here to enable the SiRFprimaII pinmux driver config PINMUX_U300 bool "U300 pinmux driver" depends on ARCH_U300 select PINMUX - help - Say Y here to enable the U300 pinmux driver + +endmenu endif -- cgit v1.2.1 From 2d5fcc986da944bca8257f358b155eec79fc4120 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 10 Nov 2011 20:28:59 +0400 Subject: pata_of_platform: Don't use NO_IRQ Drivers should not use NO_IRQ; moreover, some architectures don't have it nowadays. '0' is the 'no irq' case. Signed-off-by: Anton Vorontsov Acked-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_of_platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c index a72ab0dde4e5..2a472c5bb7db 100644 --- a/drivers/ata/pata_of_platform.c +++ b/drivers/ata/pata_of_platform.c @@ -52,7 +52,7 @@ static int __devinit pata_of_platform_probe(struct platform_device *ofdev) } ret = of_irq_to_resource(dn, 0, &irq_res); - if (ret == NO_IRQ) + if (!ret) irq_res.start = irq_res.end = 0; else irq_res.flags = 0; -- cgit v1.2.1 From 750a7eee7395492960a7aeb3a3a1aa74158ec326 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 11 Nov 2011 15:41:50 +0900 Subject: drivers: sh: Generalize runtime PM platform stub. The runtime PM platform support stub in use by ARM-based SH/R-Mobile platforms contains nothing that's specifically ARM-related and instead of wholly generic to anything using the clock framework. The recent runtime PM changes interact rather badly with the lazy disabling of clocks late in the boot process through the clock framework, leading to situations where the runtime suspend/resume paths are entered without a clock being actively driven due to having been lazily gated off. In order to correct this we can trivially tie in the aforementioned stub as a general fallback for all SH platforms that don't presently have their own runtime PM implementations (the corner case being SH-based SH-Mobile platforms, which have their own stub through the hwblk API -- which in turn has bitrotted and will be subsequently adapted to use the same stub as everyone else), regardless of whether the platforms choose to define power domains of their own or not. This fixes up regressions for clock framework users who also build in runtime PM support without any specific power domains of their own, which was previously causing the serial console to be lost when warring with lazy clock disabling. Signed-off-by: Paul Mundt --- drivers/sh/Makefile | 8 ++++++ drivers/sh/pm_runtime.c | 67 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 75 insertions(+) create mode 100644 drivers/sh/pm_runtime.c (limited to 'drivers') diff --git a/drivers/sh/Makefile b/drivers/sh/Makefile index 24e6cec0ae8d..67e272ab1623 100644 --- a/drivers/sh/Makefile +++ b/drivers/sh/Makefile @@ -7,3 +7,11 @@ obj-$(CONFIG_HAVE_CLK) += clk/ obj-$(CONFIG_MAPLE) += maple/ obj-$(CONFIG_SUPERHYWAY) += superhyway/ obj-$(CONFIG_GENERIC_GPIO) += pfc.o + +# +# For the moment we only use this framework for ARM-based SH/R-Mobile +# platforms and generic SH. SH-based SH-Mobile platforms are still using +# an older framework that is pending up-porting, at which point this +# special casing can go away. +# +obj-$(CONFIG_SUPERH)$(CONFIG_ARCH_SHMOBILE) += pm_runtime.o diff --git a/drivers/sh/pm_runtime.c b/drivers/sh/pm_runtime.c new file mode 100644 index 000000000000..bd5c6a3b8c55 --- /dev/null +++ b/drivers/sh/pm_runtime.c @@ -0,0 +1,67 @@ +/* + * arch/arm/mach-shmobile/pm_runtime.c + * + * Runtime PM support code for SuperH Mobile ARM + * + * Copyright (C) 2009-2010 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_PM_RUNTIME + +static int default_platform_runtime_idle(struct device *dev) +{ + /* suspend synchronously to disable clocks immediately */ + return pm_runtime_suspend(dev); +} + +static struct dev_pm_domain default_pm_domain = { + .ops = { + .runtime_suspend = pm_clk_suspend, + .runtime_resume = pm_clk_resume, + .runtime_idle = default_platform_runtime_idle, + USE_PLATFORM_PM_SLEEP_OPS + }, +}; + +#define DEFAULT_PM_DOMAIN_PTR (&default_pm_domain) + +#else + +#define DEFAULT_PM_DOMAIN_PTR NULL + +#endif /* CONFIG_PM_RUNTIME */ + +static struct pm_clk_notifier_block platform_bus_notifier = { + .pm_domain = DEFAULT_PM_DOMAIN_PTR, + .con_ids = { NULL, }, +}; + +static int __init sh_pm_runtime_init(void) +{ + pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier); + return 0; +} +core_initcall(sh_pm_runtime_init); + +static int __init sh_pm_runtime_late_init(void) +{ + pm_genpd_poweroff_unused(); + return 0; +} +late_initcall(sh_pm_runtime_late_init); -- cgit v1.2.1 From d03299ee6020b0cc64fc4180162fb2e8795394e1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 11 Nov 2011 15:58:50 +0900 Subject: drivers: sh: Kill off dead pathname for runtime PM stub. Signed-off-by: Paul Mundt --- drivers/sh/pm_runtime.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/sh/pm_runtime.c b/drivers/sh/pm_runtime.c index bd5c6a3b8c55..afe9282629b9 100644 --- a/drivers/sh/pm_runtime.c +++ b/drivers/sh/pm_runtime.c @@ -1,7 +1,5 @@ /* - * arch/arm/mach-shmobile/pm_runtime.c - * - * Runtime PM support code for SuperH Mobile ARM + * Runtime PM support code * * Copyright (C) 2009-2010 Magnus Damm * -- cgit v1.2.1 From 79e7066415a8b12adbeacc41b3dc44423534b8be Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 11 Nov 2011 16:11:41 +0900 Subject: sh: clkfwk: Kill off remaining debugfs cruft. Now that all of the named string association with clocks has been migrated to clkdev lookups there's no meaningful named topology that can be constructed for a debugfs tree view. Get rid of the left over bits, and shrink struct clk a bit in the process. Signed-off-by: Paul Mundt --- drivers/sh/clk/core.c | 87 --------------------------------------------------- 1 file changed, 87 deletions(-) (limited to 'drivers') diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c index 352036b1f9a2..db257a35e71a 100644 --- a/drivers/sh/clk/core.c +++ b/drivers/sh/clk/core.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include #include @@ -225,9 +224,6 @@ int clk_reparent(struct clk *child, struct clk *parent) list_add(&child->sibling, &parent->children); child->parent = parent; - /* now do the debugfs renaming to reattach the child - to the proper parent */ - return 0; } @@ -685,89 +681,6 @@ static int __init clk_syscore_init(void) subsys_initcall(clk_syscore_init); #endif -/* - * debugfs support to trace clock tree hierarchy and attributes - */ -static struct dentry *clk_debugfs_root; - -static int clk_debugfs_register_one(struct clk *c) -{ - int err; - struct dentry *d; - struct clk *pa = c->parent; - char s[255]; - char *p = s; - - p += sprintf(p, "%p", c); - d = debugfs_create_dir(s, pa ? pa->dentry : clk_debugfs_root); - if (!d) - return -ENOMEM; - c->dentry = d; - - d = debugfs_create_u8("usecount", S_IRUGO, c->dentry, (u8 *)&c->usecount); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_u32("rate", S_IRUGO, c->dentry, (u32 *)&c->rate); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_x32("flags", S_IRUGO, c->dentry, (u32 *)&c->flags); - if (!d) { - err = -ENOMEM; - goto err_out; - } - return 0; - -err_out: - debugfs_remove_recursive(c->dentry); - return err; -} - -static int clk_debugfs_register(struct clk *c) -{ - int err; - struct clk *pa = c->parent; - - if (pa && !pa->dentry) { - err = clk_debugfs_register(pa); - if (err) - return err; - } - - if (!c->dentry) { - err = clk_debugfs_register_one(c); - if (err) - return err; - } - return 0; -} - -static int __init clk_debugfs_init(void) -{ - struct clk *c; - struct dentry *d; - int err; - - d = debugfs_create_dir("clock", NULL); - if (!d) - return -ENOMEM; - clk_debugfs_root = d; - - list_for_each_entry(c, &clock_list, node) { - err = clk_debugfs_register(c); - if (err) - goto err_out; - } - return 0; -err_out: - debugfs_remove_recursive(clk_debugfs_root); - return err; -} -late_initcall(clk_debugfs_init); - static int __init clk_late_init(void) { unsigned long flags; -- cgit v1.2.1 From c0d18316ae99e1f19738f9cb5e0a2a9dc57dd8cd Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Wed, 9 Nov 2011 10:25:26 +0100 Subject: vmwgfx: Close screen object system Signed-off-by: Jakob Bornecrantz Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 03daefa73397..f3ab1fee60e1 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -1323,7 +1323,10 @@ int vmw_kms_close(struct vmw_private *dev_priv) * drm_encoder_cleanup which takes the lock we deadlock. */ drm_mode_config_cleanup(dev_priv->dev); - vmw_kms_close_legacy_display_system(dev_priv); + if (dev_priv->sou_priv) + vmw_kms_close_screen_object_display(dev_priv); + else + vmw_kms_close_legacy_display_system(dev_priv); return 0; } -- cgit v1.2.1 From f0c8a6524dca1d37ab7b0247aa7681e490af1ee4 Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Wed, 9 Nov 2011 10:25:27 +0100 Subject: vmwgfx: Initialize clip rect loop correctly in surface dirty Signed-off-by: Jakob Bornecrantz Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index f3ab1fee60e1..40c7e617e28b 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -410,8 +410,9 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv, top = clips->y1; bottom = clips->y2; - clips_ptr = clips; - for (i = 1; i < num_clips; i++, clips_ptr += inc) { + /* skip the first clip rect */ + for (i = 1, clips_ptr = clips + inc; + i < num_clips; i++, clips_ptr += inc) { left = min_t(int, left, (int)clips_ptr->x1); right = max_t(int, right, (int)clips_ptr->x2); top = min_t(int, top, (int)clips_ptr->y1); -- cgit v1.2.1 From baa91d640034dd8d0b58a9088f5fefe5cec3c8c4 Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Wed, 9 Nov 2011 10:25:28 +0100 Subject: vmwgfx: Only allow 64x64 cursors Snooping code expects this to be the case. Signed-off-by: Jakob Bornecrantz Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 40c7e617e28b..880e285d7578 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -105,6 +105,10 @@ int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv, struct vmw_dma_buffer *dmabuf = NULL; int ret; + /* A lot of the code assumes this */ + if (handle && (width != 64 || height != 64)) + return -EINVAL; + if (handle) { ret = vmw_user_surface_lookup_handle(dev_priv, tfile, handle, &surface); -- cgit v1.2.1 From 471dd2ef3761de01348b19e83128a778df1d45b2 Mon Sep 17 00:00:00 2001 From: Vinson Lee Date: Thu, 10 Nov 2011 11:55:40 -0800 Subject: drm: Ensure string is null terminated. Fixes Coverity buffer not null terminated defect. Signed-off-by: Vinson Lee Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 9a2e2a14b3bb..405c63b9d539 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -2118,8 +2118,10 @@ struct drm_property *drm_property_create(struct drm_device *dev, int flags, property->num_values = num_values; INIT_LIST_HEAD(&property->enum_blob_list); - if (name) + if (name) { strncpy(property->name, name, DRM_PROP_NAME_LEN); + property->name[DRM_PROP_NAME_LEN-1] = '\0'; + } list_add_tail(&property->head, &dev->mode_config.property_list); return property; -- cgit v1.2.1 From 7a1619b97e978bb9c05fa4bbe64171068bd5bf85 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Thu, 10 Nov 2011 18:57:26 +0100 Subject: drm/radeon: Make sure CS mutex is held across GPU reset. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This was only the case if the GPU reset was triggered from the CS ioctl, otherwise other processes could happily enter the CS ioctl and wreak havoc during the GPU reset. This is a little complicated because the GPU reset can be triggered from the CS ioctl, in which case we're already holding the mutex, or from other call paths, in which case we need to lock the mutex. AFAICT the mutex API doesn't allow recursive locking or finding out the mutex owner, so we need to handle this with helper functions which allow recursive locking from the same process. Signed-off-by: Michel Dänzer Reviewed-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon.h | 44 +++++++++++++++++++++++++++++++++- drivers/gpu/drm/radeon/radeon_cs.c | 14 +++++------ drivers/gpu/drm/radeon/radeon_device.c | 16 +++++++++---- 3 files changed, 62 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index b316b301152f..85ef693850e7 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1142,6 +1142,48 @@ struct r600_vram_scratch { u64 gpu_addr; }; + +/* + * Mutex which allows recursive locking from the same process. + */ +struct radeon_mutex { + struct mutex mutex; + struct task_struct *owner; + int level; +}; + +static inline void radeon_mutex_init(struct radeon_mutex *mutex) +{ + mutex_init(&mutex->mutex); + mutex->owner = NULL; + mutex->level = 0; +} + +static inline void radeon_mutex_lock(struct radeon_mutex *mutex) +{ + if (mutex_trylock(&mutex->mutex)) { + /* The mutex was unlocked before, so it's ours now */ + mutex->owner = current; + } else if (mutex->owner != current) { + /* Another process locked the mutex, take it */ + mutex_lock(&mutex->mutex); + mutex->owner = current; + } + /* Otherwise the mutex was already locked by this process */ + + mutex->level++; +} + +static inline void radeon_mutex_unlock(struct radeon_mutex *mutex) +{ + if (--mutex->level > 0) + return; + + mutex->owner = NULL; + mutex_unlock(&mutex->mutex); +} + + /* * Core structure, functions and helpers. */ @@ -1197,7 +1239,7 @@ struct radeon_device { struct radeon_gem gem; struct radeon_pm pm; uint32_t bios_scratch[RADEON_BIOS_NUM_SCRATCH]; - struct mutex cs_mutex; + struct radeon_mutex cs_mutex; struct radeon_wb wb; struct radeon_dummy_page dummy_page; bool gpu_lockup; diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index fae00c0d75aa..ccaa243c1442 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -222,7 +222,7 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) struct radeon_cs_chunk *ib_chunk; int r; - mutex_lock(&rdev->cs_mutex); + radeon_mutex_lock(&rdev->cs_mutex); /* initialize parser */ memset(&parser, 0, sizeof(struct radeon_cs_parser)); parser.filp = filp; @@ -233,14 +233,14 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) if (r) { DRM_ERROR("Failed to initialize parser !\n"); radeon_cs_parser_fini(&parser, r); - mutex_unlock(&rdev->cs_mutex); + radeon_mutex_unlock(&rdev->cs_mutex); return r; } r = radeon_ib_get(rdev, &parser.ib); if (r) { DRM_ERROR("Failed to get ib !\n"); radeon_cs_parser_fini(&parser, r); - mutex_unlock(&rdev->cs_mutex); + radeon_mutex_unlock(&rdev->cs_mutex); return r; } r = radeon_cs_parser_relocs(&parser); @@ -248,7 +248,7 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) if (r != -ERESTARTSYS) DRM_ERROR("Failed to parse relocation %d!\n", r); radeon_cs_parser_fini(&parser, r); - mutex_unlock(&rdev->cs_mutex); + radeon_mutex_unlock(&rdev->cs_mutex); return r; } /* Copy the packet into the IB, the parser will read from the @@ -260,14 +260,14 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) if (r || parser.parser_error) { DRM_ERROR("Invalid command stream !\n"); radeon_cs_parser_fini(&parser, r); - mutex_unlock(&rdev->cs_mutex); + radeon_mutex_unlock(&rdev->cs_mutex); return r; } r = radeon_cs_finish_pages(&parser); if (r) { DRM_ERROR("Invalid command stream !\n"); radeon_cs_parser_fini(&parser, r); - mutex_unlock(&rdev->cs_mutex); + radeon_mutex_unlock(&rdev->cs_mutex); return r; } r = radeon_ib_schedule(rdev, parser.ib); @@ -275,7 +275,7 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) DRM_ERROR("Failed to schedule IB !\n"); } radeon_cs_parser_fini(&parser, r); - mutex_unlock(&rdev->cs_mutex); + radeon_mutex_unlock(&rdev->cs_mutex); return r; } diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index c33bc914d93d..c4d00a171411 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -716,7 +716,7 @@ int radeon_device_init(struct radeon_device *rdev, /* mutex initialization are all done here so we * can recall function without having locking issues */ - mutex_init(&rdev->cs_mutex); + radeon_mutex_init(&rdev->cs_mutex); mutex_init(&rdev->ib_pool.mutex); mutex_init(&rdev->cp.mutex); mutex_init(&rdev->dc_hw_i2c_mutex); @@ -955,6 +955,9 @@ int radeon_gpu_reset(struct radeon_device *rdev) int r; int resched; + /* Prevent CS ioctl from interfering */ + radeon_mutex_lock(&rdev->cs_mutex); + radeon_save_bios_scratch_regs(rdev); /* block TTM */ resched = ttm_bo_lock_delayed_workqueue(&rdev->mman.bdev); @@ -967,10 +970,15 @@ int radeon_gpu_reset(struct radeon_device *rdev) radeon_restore_bios_scratch_regs(rdev); drm_helper_resume_force_mode(rdev->ddev); ttm_bo_unlock_delayed_workqueue(&rdev->mman.bdev, resched); - return 0; } - /* bad news, how to tell it to userspace ? */ - dev_info(rdev->dev, "GPU reset failed\n"); + + radeon_mutex_unlock(&rdev->cs_mutex); + + if (r) { + /* bad news, how to tell it to userspace ? */ + dev_info(rdev->dev, "GPU reset failed\n"); + } + return r; } -- cgit v1.2.1 From 3b9832f662d195755e7308f92368d44458268457 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 10 Nov 2011 08:59:39 -0500 Subject: drm/radeon/kms: fix use of vram scratch page on evergreen/ni This hunk seems to have gotten lost when I rebased the patch. Reported-by: Sylvain Bertrand Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/evergreen.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index e4c384b9511c..2e30160687c8 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -1219,7 +1219,7 @@ void evergreen_mc_program(struct radeon_device *rdev) WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR, rdev->mc.vram_end >> 12); } - WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, 0); + WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, rdev->vram_scratch.gpu_addr >> 12); if (rdev->flags & RADEON_IS_IGP) { tmp = RREG32(MC_FUS_VM_FB_OFFSET) & 0x000FFFFF; tmp |= ((rdev->mc.vram_end >> 20) & 0xF) << 24; -- cgit v1.2.1 From b3e067c0b276197b59046d7095b01b99f98b2821 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Wed, 9 Nov 2011 22:20:35 +0100 Subject: drm: serialize access to list of debugfs files Nouveau, when configured with debugfs, creates debugfs files for every channel, so structure holding list of files needs to be protected from simultaneous changes by multiple threads. Without this patch it's possible to hit kernel oops in drm_debugfs_remove_files just by running a couple of xterms with looped glxinfo. Signed-off-by: Marcin Slusarz Reviewed-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_debugfs.c | 12 +++++++++--- drivers/gpu/drm/i915/i915_debugfs.c | 5 ++++- 2 files changed, 13 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_debugfs.c b/drivers/gpu/drm/drm_debugfs.c index d067c12ba940..1c7a1c0d3edd 100644 --- a/drivers/gpu/drm/drm_debugfs.c +++ b/drivers/gpu/drm/drm_debugfs.c @@ -118,7 +118,10 @@ int drm_debugfs_create_files(struct drm_info_list *files, int count, tmp->minor = minor; tmp->dent = ent; tmp->info_ent = &files[i]; - list_add(&(tmp->list), &(minor->debugfs_nodes.list)); + + mutex_lock(&minor->debugfs_lock); + list_add(&tmp->list, &minor->debugfs_list); + mutex_unlock(&minor->debugfs_lock); } return 0; @@ -146,7 +149,8 @@ int drm_debugfs_init(struct drm_minor *minor, int minor_id, char name[64]; int ret; - INIT_LIST_HEAD(&minor->debugfs_nodes.list); + INIT_LIST_HEAD(&minor->debugfs_list); + mutex_init(&minor->debugfs_lock); sprintf(name, "%d", minor_id); minor->debugfs_root = debugfs_create_dir(name, root); if (!minor->debugfs_root) { @@ -192,8 +196,9 @@ int drm_debugfs_remove_files(struct drm_info_list *files, int count, struct drm_info_node *tmp; int i; + mutex_lock(&minor->debugfs_lock); for (i = 0; i < count; i++) { - list_for_each_safe(pos, q, &minor->debugfs_nodes.list) { + list_for_each_safe(pos, q, &minor->debugfs_list) { tmp = list_entry(pos, struct drm_info_node, list); if (tmp->info_ent == &files[i]) { debugfs_remove(tmp->dent); @@ -202,6 +207,7 @@ int drm_debugfs_remove_files(struct drm_info_list *files, int count, } } } + mutex_unlock(&minor->debugfs_lock); return 0; } EXPORT_SYMBOL(drm_debugfs_remove_files); diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index d14b44e13f51..4f40f1ce1d8e 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -1506,7 +1506,10 @@ drm_add_fake_info_node(struct drm_minor *minor, node->minor = minor; node->dent = ent; node->info_ent = (void *) key; - list_add(&node->list, &minor->debugfs_nodes.list); + + mutex_lock(&minor->debugfs_lock); + list_add(&node->list, &minor->debugfs_list); + mutex_unlock(&minor->debugfs_lock); return 0; } -- cgit v1.2.1 From 87cb73dafef765c6e20452ebf2581ba113c0360a Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Wed, 9 Nov 2011 01:16:50 +0100 Subject: drm: drop select of SLOW_WORK slow-work got killed in commit 181a51f6e0. This means that since v2.6.36 there is no Kconfig symbol SLOW_WORK. Apparently selecting that symbol is a nop. Drop that select. Signed-off-by: Paul Bolle Signed-off-by: Dave Airlie --- drivers/gpu/drm/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 785127cb281b..866095c2d645 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -9,7 +9,6 @@ menuconfig DRM depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU select I2C select I2C_ALGOBIT - select SLOW_WORK help Kernel-level support for the Direct Rendering Infrastructure (DRI) introduced in XFree86 4.0. If you say Y here, you need to select -- cgit v1.2.1 From 091264f0bc12419560ac64fcef4567809d611658 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 8 Nov 2011 10:09:58 -0500 Subject: drm/radeon/kms: make an aux failure debug only Can happen when there is no DP panel attached, confusing users. Make it debug only. Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index a0de48542f71..6fb335a4fdda 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -283,7 +283,7 @@ int radeon_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode, } } - DRM_ERROR("aux i2c too many retries, giving up\n"); + DRM_DEBUG_KMS("aux i2c too many retries, giving up\n"); return -EREMOTEIO; } -- cgit v1.2.1 From c5006cfe2f5fc3cc03ebe2342aaca83d051d99e0 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 7 Nov 2011 10:39:57 -0800 Subject: drm: try to restore previous CRTC config if mode set fails We restore the CRTC, encoder, and connector configurations, but if the mode set failed, the attached display may have been turned off, so we need to try set_config again to restore things to the way they were. Signed-off-by: Jesse Barnes Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 2957636161e8..3969f7553fe7 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -484,6 +484,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) struct drm_connector *save_connectors, *connector; int count = 0, ro, fail = 0; struct drm_crtc_helper_funcs *crtc_funcs; + struct drm_mode_set save_set; int ret = 0; int i; @@ -556,6 +557,12 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) save_connectors[count++] = *connector; } + save_set.crtc = set->crtc; + save_set.mode = &set->crtc->mode; + save_set.x = set->crtc->x; + save_set.y = set->crtc->y; + save_set.fb = set->crtc->fb; + /* We should be able to check here if the fb has the same properties * and then just flip_or_move it */ if (set->crtc->fb != set->fb) { @@ -721,6 +728,12 @@ fail: *connector = save_connectors[count++]; } + /* Try to restore the config */ + if (mode_changed && + !drm_crtc_helper_set_mode(save_set.crtc, save_set.mode, save_set.x, + save_set.y, save_set.fb)) + DRM_ERROR("failed to restore config after modeset failure\n"); + kfree(save_connectors); kfree(save_encoders); kfree(save_crtcs); -- cgit v1.2.1 From 8f4ff2b06afcd6f151868474a432c603057eaf56 Mon Sep 17 00:00:00 2001 From: Ilija Hadzic Date: Mon, 31 Oct 2011 17:46:18 -0400 Subject: drm: do not sleep on vblank while holding a mutex drm_wait_vblank must be DRM_UNLOCKED because otherwise it will grab the drm_global_mutex and then go to sleep until the vblank event it is waiting for. That can wreck havoc in the windowing system because if one process issues this ioctl, it will block all other processes for the duration of all vblanks between the current and the one it is waiting for. In some cases it can block the entire windowing system. v2: incorporate comments received from Daniel Vetter and Michel Daenzer. v3/v4: after a lengty discussion with Daniel Vetter, it was concluded that the only thing not yet protected with locks and atomic ops is the write to dev->last_vblank_wait. It's only used in a debug file in proc, and the current code already employs no correct locking: the proc file only takes dev->struct_mutex, whereas drm_wait_vblank implicitly took the drm_global_mutex. Given all this, it's not worth bothering to try to fix the locks at this time. Signed-off-by: Ilija Hadzic Reviewed-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index fc81af9dbf42..40c187c60f44 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -125,7 +125,7 @@ static struct drm_ioctl_desc drm_ioctls[] = { DRM_IOCTL_DEF(DRM_IOCTL_SG_ALLOC, drm_sg_alloc_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), DRM_IOCTL_DEF(DRM_IOCTL_SG_FREE, drm_sg_free, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), - DRM_IOCTL_DEF(DRM_IOCTL_WAIT_VBLANK, drm_wait_vblank, 0), + DRM_IOCTL_DEF(DRM_IOCTL_WAIT_VBLANK, drm_wait_vblank, DRM_UNLOCKED), DRM_IOCTL_DEF(DRM_IOCTL_MODESET_CTL, drm_modeset_ctl, 0), -- cgit v1.2.1 From bfba16582600ab2c75dc39250a2b8f3b2a42da11 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 29 Oct 2011 10:21:28 +0300 Subject: drm/radeon/benchmark: signedness bug in radeon_benchmark_move() radeon_benchmark_do_move() returns an int so "time" should be int too. Making it unsigned breaks the error handling. Signed-off-by: Dan Carpenter Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_benchmark.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c index 5cafc90de7f8..17e1a9b2d8fb 100644 --- a/drivers/gpu/drm/radeon/radeon_benchmark.c +++ b/drivers/gpu/drm/radeon/radeon_benchmark.c @@ -98,7 +98,7 @@ static void radeon_benchmark_move(struct radeon_device *rdev, unsigned size, struct radeon_bo *sobj = NULL; uint64_t saddr, daddr; int r, n; - unsigned int time; + int time; n = RADEON_BENCHMARK_ITERATIONS; r = radeon_bo_create(rdev, size, PAGE_SIZE, true, sdomain, &sobj); -- cgit v1.2.1 From a6778e9e7fb57603f15344ceb30098a3f6b7caf4 Mon Sep 17 00:00:00 2001 From: Ilija Hadzic Date: Mon, 31 Oct 2011 13:11:57 -0400 Subject: drm: add some comments to drm_wait_vblank and drm_queue_vblank_event during the review of the fix for locks problems in drm_wait_vblank, a couple of false concerns were raised about how the drm_vblank_get and drm_vblank_put are used in this function; it turned out that the code is correct and that it cannot be simplified add a few comments to explain non-obvious flows in the code, to prevent "false alarms" in the future v2: incorporate comments received from Daniel Vetter Signed-off-by: Ilija Hadzic Reviewed-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index cb3794a00f98..aa3ac0125d90 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -1125,6 +1125,7 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe, trace_drm_vblank_event_delivered(current->pid, pipe, vblwait->request.sequence); } else { + /* drm_handle_vblank_events will call drm_vblank_put */ list_add_tail(&e->base.link, &dev->vblank_event_list); vblwait->reply.sequence = vblwait->request.sequence; } @@ -1205,8 +1206,12 @@ int drm_wait_vblank(struct drm_device *dev, void *data, goto done; } - if (flags & _DRM_VBLANK_EVENT) + if (flags & _DRM_VBLANK_EVENT) { + /* must hold on to the vblank ref until the event fires + * drm_vblank_put will be called asynchronously + */ return drm_queue_vblank_event(dev, crtc, vblwait, file_priv); + } if ((flags & _DRM_VBLANK_NEXTONMISS) && (seq - vblwait->request.sequence) <= (1<<23)) { -- cgit v1.2.1 From 44a1dabf4cfb787459bfbff305a2a1cda628766d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 31 Oct 2011 12:51:30 -0700 Subject: drm: fix kconfig unmet dependency warning Fix kconfig unmet dependency warning. BACKLIGHT_CLASS_DEVICE depends on BACKLIGHT_LCD_SUPPORT, so select the latter along with the former. warning: (DRM_RADEON_KMS && DRM_I915 && STUB_POULSBO && FB_BACKLIGHT && PANEL_SHARP_LS037V7DW01 && PANEL_ACX565AKM && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_ASUS && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) Signed-off-by: Randy Dunlap Cc: David Airlie Signed-off-by: Andrew Morton Signed-off-by: Dave Airlie --- drivers/gpu/drm/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 866095c2d645..1368826ef284 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -95,6 +95,7 @@ config DRM_I915 select FB_CFB_IMAGEBLIT # i915 depends on ACPI_VIDEO when ACPI is enabled # but for select to work, need to select ACPI_VIDEO's dependencies, ick + select BACKLIGHT_LCD_SUPPORT if ACPI select BACKLIGHT_CLASS_DEVICE if ACPI select VIDEO_OUTPUT_CONTROL if ACPI select INPUT if ACPI -- cgit v1.2.1 From 10b391b946c459a39b631aaf81880f94dcfbff46 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 4 Nov 2011 10:09:40 -0400 Subject: drm/radeon/kms: remove extraneous calls to radeon_pm_compute_clocks() It's already called via the DPMS functions. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 6 ------ drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 6 ------ 2 files changed, 12 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 87921c88a95c..87631fede1f8 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1522,12 +1522,6 @@ static bool atombios_crtc_mode_fixup(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct drm_device *dev = crtc->dev; - struct radeon_device *rdev = dev->dev_private; - - /* adjust pm to upcoming mode change */ - radeon_pm_compute_clocks(rdev); - if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode)) return false; return true; diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index 41a5d48e657b..daadf2111040 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -991,12 +991,6 @@ static bool radeon_crtc_mode_fixup(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct drm_device *dev = crtc->dev; - struct radeon_device *rdev = dev->dev_private; - - /* adjust pm to upcoming mode change */ - radeon_pm_compute_clocks(rdev); - if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode)) return false; return true; -- cgit v1.2.1 From a4c9e2eed17457b30e17235158657801ec686a14 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 4 Nov 2011 10:09:41 -0400 Subject: drm/radeon/kms/pm: add a proper pm profile init function for fusion The new power tables need to be handled differently when setting up the profiles. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/evergreen.c | 51 +++++++++++++++++++++++++++++++ drivers/gpu/drm/radeon/r600.c | 58 +++++++++++++----------------------- drivers/gpu/drm/radeon/radeon.h | 3 ++ drivers/gpu/drm/radeon/radeon_asic.c | 2 +- drivers/gpu/drm/radeon/radeon_asic.h | 1 + drivers/gpu/drm/radeon/radeon_pm.c | 18 +++++++++++ 6 files changed, 94 insertions(+), 39 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 2e30160687c8..1d603a3335db 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -157,6 +157,57 @@ int sumo_get_temp(struct radeon_device *rdev) return actual_temp * 1000; } +void sumo_pm_init_profile(struct radeon_device *rdev) +{ + int idx; + + /* default */ + rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index; + rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index; + rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_cm_idx = 0; + + /* low,mid sh/mh */ + if (rdev->flags & RADEON_IS_MOBILITY) + idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); + else + idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); + + rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0; + + rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0; + + rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0; + + rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0; + + /* high sh/mh */ + idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); + rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_cm_idx = + rdev->pm.power_state[idx].num_clock_modes - 1; + + rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_cm_idx = + rdev->pm.power_state[idx].num_clock_modes - 1; +} + void evergreen_pm_misc(struct radeon_device *rdev) { int req_ps_idx = rdev->pm.requested_power_state_index; diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 19afc43ad173..dc162dd970da 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -288,24 +288,6 @@ void r600_pm_get_dynpm_state(struct radeon_device *rdev) pcie_lanes); } -static int r600_pm_get_type_index(struct radeon_device *rdev, - enum radeon_pm_state_type ps_type, - int instance) -{ - int i; - int found_instance = -1; - - for (i = 0; i < rdev->pm.num_power_states; i++) { - if (rdev->pm.power_state[i].type == ps_type) { - found_instance++; - if (found_instance == instance) - return i; - } - } - /* return default if no match */ - return rdev->pm.default_power_state_index; -} - void rs780_pm_init_profile(struct radeon_device *rdev) { if (rdev->pm.num_power_states == 2) { @@ -504,79 +486,79 @@ void r600_pm_init_profile(struct radeon_device *rdev) /* low sh */ if (rdev->flags & RADEON_IS_MOBILITY) { rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0; rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0; } else { rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0; rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0; } /* mid sh */ if (rdev->flags & RADEON_IS_MOBILITY) { rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0; rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1; } else { rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0; rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1; } /* high sh */ rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_cm_idx = 0; rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_cm_idx = 2; /* low mh */ if (rdev->flags & RADEON_IS_MOBILITY) { rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1); rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1); rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0; rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0; } else { rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0; rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0; } /* mid mh */ if (rdev->flags & RADEON_IS_MOBILITY) { rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1); rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1); rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0; rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1; } else { rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0; rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1; } /* high mh */ rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = - r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); + radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_cm_idx = 0; rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_cm_idx = 2; } diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 85ef693850e7..41f7cd26515b 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -855,6 +855,9 @@ struct radeon_pm { struct device *int_hwmon_dev; }; +int radeon_pm_get_type_index(struct radeon_device *rdev, + enum radeon_pm_state_type ps_type, + int instance); /* * Benchmarking diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c index e2944566ffea..a2e1eae114ef 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.c +++ b/drivers/gpu/drm/radeon/radeon_asic.c @@ -834,7 +834,7 @@ static struct radeon_asic sumo_asic = { .pm_misc = &evergreen_pm_misc, .pm_prepare = &evergreen_pm_prepare, .pm_finish = &evergreen_pm_finish, - .pm_init_profile = &rs780_pm_init_profile, + .pm_init_profile = &sumo_pm_init_profile, .pm_get_dynpm_state = &r600_pm_get_dynpm_state, .pre_page_flip = &evergreen_pre_page_flip, .page_flip = &evergreen_page_flip, diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index 85f14f0337e4..59914842a729 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -413,6 +413,7 @@ extern int evergreen_cs_parse(struct radeon_cs_parser *p); extern void evergreen_pm_misc(struct radeon_device *rdev); extern void evergreen_pm_prepare(struct radeon_device *rdev); extern void evergreen_pm_finish(struct radeon_device *rdev); +extern void sumo_pm_init_profile(struct radeon_device *rdev); extern void evergreen_pre_page_flip(struct radeon_device *rdev, int crtc); extern u32 evergreen_page_flip(struct radeon_device *rdev, int crtc, u64 crtc_base); extern void evergreen_post_page_flip(struct radeon_device *rdev, int crtc); diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index 6fabe89fa6a1..78a665bd9519 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -53,6 +53,24 @@ static void radeon_pm_set_clocks(struct radeon_device *rdev); #define ACPI_AC_CLASS "ac_adapter" +int radeon_pm_get_type_index(struct radeon_device *rdev, + enum radeon_pm_state_type ps_type, + int instance) +{ + int i; + int found_instance = -1; + + for (i = 0; i < rdev->pm.num_power_states; i++) { + if (rdev->pm.power_state[i].type == ps_type) { + found_instance++; + if (found_instance == instance) + return i; + } + } + /* return default if no match */ + return rdev->pm.default_power_state_index; +} + #ifdef CONFIG_ACPI static int radeon_acpi_event(struct notifier_block *nb, unsigned long val, -- cgit v1.2.1 From bbe26ffe9ffd231de7cf88c4361f1939858e8594 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 4 Nov 2011 10:09:42 -0400 Subject: drm/radeon/kms: optimize r600_pm_profile_init Avoid a lot of extra loops through the pm state array. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 100 ++++++++++++++---------------------------- 1 file changed, 32 insertions(+), 68 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index dc162dd970da..9cdda0b3b081 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -403,6 +403,8 @@ void rs780_pm_init_profile(struct radeon_device *rdev) void r600_pm_init_profile(struct radeon_device *rdev) { + int idx; + if (rdev->family == CHIP_R600) { /* XXX */ /* default */ @@ -484,81 +486,43 @@ void r600_pm_init_profile(struct radeon_device *rdev) rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_off_cm_idx = 0; rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_cm_idx = 2; /* low sh */ - if (rdev->flags & RADEON_IS_MOBILITY) { - rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); - rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); - rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0; - rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0; - } else { - rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); - rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); - rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0; - rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0; - } + if (rdev->flags & RADEON_IS_MOBILITY) + idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); + else + idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); + rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0; /* mid sh */ - if (rdev->flags & RADEON_IS_MOBILITY) { - rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); - rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0); - rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0; - rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1; - } else { - rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); - rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); - rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0; - rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1; - } + rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1; /* high sh */ - rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); - rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); + idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0); + rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = idx; rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_cm_idx = 0; rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_cm_idx = 2; /* low mh */ - if (rdev->flags & RADEON_IS_MOBILITY) { - rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1); - rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1); - rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0; - rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0; - } else { - rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); - rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); - rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0; - rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0; - } + if (rdev->flags & RADEON_IS_MOBILITY) + idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1); + else + idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); + rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0; /* mid mh */ - if (rdev->flags & RADEON_IS_MOBILITY) { - rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1); - rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1); - rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0; - rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1; - } else { - rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); - rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); - rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0; - rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1; - } + rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0; + rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1; /* high mh */ - rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); - rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = - radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); + idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1); + rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = idx; + rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = idx; rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_cm_idx = 0; rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_cm_idx = 2; } -- cgit v1.2.1 From 8f3f1c9a22a6420e28c2d3eff59b832893bc8efc Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 4 Nov 2011 10:09:43 -0400 Subject: drm/radeon/kms/pm: switch to dynamically allocating clock mode array On newer chips the number of clock modes per power state varies. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon.h | 3 +- drivers/gpu/drm/radeon/radeon_atombios.c | 118 +++++++++++++++++++++---------- 2 files changed, 82 insertions(+), 39 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 41f7cd26515b..fc5a1d642cb5 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -784,8 +784,7 @@ struct radeon_pm_clock_info { struct radeon_power_state { enum radeon_pm_state_type type; - /* XXX: use a define for num clock modes */ - struct radeon_pm_clock_info clock_info[8]; + struct radeon_pm_clock_info *clock_info; /* number of valid clock modes in this power state */ int num_clock_modes; struct radeon_pm_clock_info *default_clock_mode; diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 08d0b94332e6..d2d179267af3 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -1999,6 +1999,10 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev) rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE; switch (frev) { case 1: + rdev->pm.power_state[state_index].clock_info = + kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL); + if (!rdev->pm.power_state[state_index].clock_info) + return state_index; rdev->pm.power_state[state_index].num_clock_modes = 1; rdev->pm.power_state[state_index].clock_info[0].mclk = le16_to_cpu(power_info->info.asPowerPlayInfo[i].usMemoryClock); @@ -2035,6 +2039,10 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev) state_index++; break; case 2: + rdev->pm.power_state[state_index].clock_info = + kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL); + if (!rdev->pm.power_state[state_index].clock_info) + return state_index; rdev->pm.power_state[state_index].num_clock_modes = 1; rdev->pm.power_state[state_index].clock_info[0].mclk = le32_to_cpu(power_info->info_2.asPowerPlayInfo[i].ulMemoryClock); @@ -2072,6 +2080,10 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev) state_index++; break; case 3: + rdev->pm.power_state[state_index].clock_info = + kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL); + if (!rdev->pm.power_state[state_index].clock_info) + return state_index; rdev->pm.power_state[state_index].num_clock_modes = 1; rdev->pm.power_state[state_index].clock_info[0].mclk = le32_to_cpu(power_info->info_3.asPowerPlayInfo[i].ulMemoryClock); @@ -2257,7 +2269,7 @@ static void radeon_atombios_parse_pplib_non_clock_info(struct radeon_device *rde rdev->pm.default_power_state_index = state_index; rdev->pm.power_state[state_index].default_clock_mode = &rdev->pm.power_state[state_index].clock_info[mode_index - 1]; - if (ASIC_IS_DCE5(rdev)) { + if (ASIC_IS_DCE5(rdev) && !(rdev->flags & RADEON_IS_IGP)) { /* NI chips post without MC ucode, so default clocks are strobe mode only */ rdev->pm.default_sclk = rdev->pm.power_state[state_index].clock_info[0].sclk; rdev->pm.default_mclk = rdev->pm.power_state[state_index].clock_info[0].mclk; @@ -2377,17 +2389,31 @@ static int radeon_atombios_parse_power_table_4_5(struct radeon_device *rdev) le16_to_cpu(power_info->pplib.usNonClockInfoArrayOffset) + (power_state->v1.ucNonClockStateIndex * power_info->pplib.ucNonClockSize)); - for (j = 0; j < (power_info->pplib.ucStateEntrySize - 1); j++) { - clock_info = (union pplib_clock_info *) - (mode_info->atom_context->bios + data_offset + - le16_to_cpu(power_info->pplib.usClockInfoArrayOffset) + - (power_state->v1.ucClockStateIndices[j] * - power_info->pplib.ucClockInfoSize)); - valid = radeon_atombios_parse_pplib_clock_info(rdev, - state_index, mode_index, - clock_info); - if (valid) - mode_index++; + rdev->pm.power_state[i].clock_info = kzalloc(sizeof(struct radeon_pm_clock_info) * + ((power_info->pplib.ucStateEntrySize - 1) ? + (power_info->pplib.ucStateEntrySize - 1) : 1), + GFP_KERNEL); + if (!rdev->pm.power_state[i].clock_info) + return state_index; + if (power_info->pplib.ucStateEntrySize - 1) { + for (j = 0; j < (power_info->pplib.ucStateEntrySize - 1); j++) { + clock_info = (union pplib_clock_info *) + (mode_info->atom_context->bios + data_offset + + le16_to_cpu(power_info->pplib.usClockInfoArrayOffset) + + (power_state->v1.ucClockStateIndices[j] * + power_info->pplib.ucClockInfoSize)); + valid = radeon_atombios_parse_pplib_clock_info(rdev, + state_index, mode_index, + clock_info); + if (valid) + mode_index++; + } + } else { + rdev->pm.power_state[state_index].clock_info[0].mclk = + rdev->clock.default_mclk; + rdev->pm.power_state[state_index].clock_info[0].sclk = + rdev->clock.default_sclk; + mode_index++; } rdev->pm.power_state[state_index].num_clock_modes = mode_index; if (mode_index) { @@ -2456,18 +2482,32 @@ static int radeon_atombios_parse_power_table_6(struct radeon_device *rdev) non_clock_array_index = i; /* power_state->v2.nonClockInfoIndex */ non_clock_info = (struct _ATOM_PPLIB_NONCLOCK_INFO *) &non_clock_info_array->nonClockInfo[non_clock_array_index]; - for (j = 0; j < power_state->v2.ucNumDPMLevels; j++) { - clock_array_index = power_state->v2.clockInfoIndex[j]; - /* XXX this might be an inagua bug... */ - if (clock_array_index >= clock_info_array->ucNumEntries) - continue; - clock_info = (union pplib_clock_info *) - &clock_info_array->clockInfo[clock_array_index]; - valid = radeon_atombios_parse_pplib_clock_info(rdev, - state_index, mode_index, - clock_info); - if (valid) - mode_index++; + rdev->pm.power_state[i].clock_info = kzalloc(sizeof(struct radeon_pm_clock_info) * + (power_state->v2.ucNumDPMLevels ? + power_state->v2.ucNumDPMLevels : 1), + GFP_KERNEL); + if (!rdev->pm.power_state[i].clock_info) + return state_index; + if (power_state->v2.ucNumDPMLevels) { + for (j = 0; j < power_state->v2.ucNumDPMLevels; j++) { + clock_array_index = power_state->v2.clockInfoIndex[j]; + /* XXX this might be an inagua bug... */ + if (clock_array_index >= clock_info_array->ucNumEntries) + continue; + clock_info = (union pplib_clock_info *) + &clock_info_array->clockInfo[clock_array_index]; + valid = radeon_atombios_parse_pplib_clock_info(rdev, + state_index, mode_index, + clock_info); + if (valid) + mode_index++; + } + } else { + rdev->pm.power_state[state_index].clock_info[0].mclk = + rdev->clock.default_mclk; + rdev->pm.power_state[state_index].clock_info[0].sclk = + rdev->clock.default_sclk; + mode_index++; } rdev->pm.power_state[state_index].num_clock_modes = mode_index; if (mode_index) { @@ -2524,19 +2564,23 @@ void radeon_atombios_get_power_modes(struct radeon_device *rdev) } else { rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state), GFP_KERNEL); if (rdev->pm.power_state) { - /* add the default mode */ - rdev->pm.power_state[state_index].type = - POWER_STATE_TYPE_DEFAULT; - rdev->pm.power_state[state_index].num_clock_modes = 1; - rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk; - rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk; - rdev->pm.power_state[state_index].default_clock_mode = - &rdev->pm.power_state[state_index].clock_info[0]; - rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE; - rdev->pm.power_state[state_index].pcie_lanes = 16; - rdev->pm.default_power_state_index = state_index; - rdev->pm.power_state[state_index].flags = 0; - state_index++; + rdev->pm.power_state[0].clock_info = + kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL); + if (rdev->pm.power_state[0].clock_info) { + /* add the default mode */ + rdev->pm.power_state[state_index].type = + POWER_STATE_TYPE_DEFAULT; + rdev->pm.power_state[state_index].num_clock_modes = 1; + rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk; + rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk; + rdev->pm.power_state[state_index].default_clock_mode = + &rdev->pm.power_state[state_index].clock_info[0]; + rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE; + rdev->pm.power_state[state_index].pcie_lanes = 16; + rdev->pm.default_power_state_index = state_index; + rdev->pm.power_state[state_index].flags = 0; + state_index++; + } } } -- cgit v1.2.1 From f750ba9b8db2a926c315ccfa9e95d12fe4590a22 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 10 Nov 2011 16:39:32 +0800 Subject: arm/imx: fix imx6q mmc error when mounting rootfs The following error is seen in some case when mounting rootfs from SD/MMC cards. Waiting for root device /dev/mmcblk0p1... mmc1: host does not support reading read-only switch. assuming write-enable. mmc1: new high speed SDHC card at address b368 mmcblk0: mmc1:b368 SDC 3.74 GiB mmcblk0: p1 mmc1: Timeout waiting for hardware interrupt. mmcblk0: error -110 transferring data, sector 3678224, nr 40, cmd response 0x900, card status 0xc00 end_request: I/O error, dev mmcblk0, sector 3678225 Buffer I/O error on device mmcblk0p1, logical block 458754 lost page write due to I/O error on mmcblk0p1 This patch fixes the problem by lowering the usdhc clock and correcting watermark configuration. Signed-off-by: Shawn Guo Cc: Chris Ball Cc: Sascha Hauer Signed-off-by: Sascha Hauer --- drivers/mmc/host/sdhci-esdhc-imx.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index ae57769ba50d..4b976f00ea85 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -32,6 +32,7 @@ /* VENDOR SPEC register */ #define SDHCI_VENDOR_SPEC 0xC0 #define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002 +#define SDHCI_WTMK_LVL 0x44 #define SDHCI_MIX_CTRL 0x48 /* @@ -476,6 +477,13 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev) if (is_imx53_esdhc(imx_data)) imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT; + /* + * The imx6q ROM code will change the default watermark level setting + * to something insane. Change it back here. + */ + if (is_imx6q_usdhc(imx_data)) + writel(0x08100810, host->ioaddr + SDHCI_WTMK_LVL); + boarddata = &imx_data->boarddata; if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) { if (!host->mmc->parent->platform_data) { -- cgit v1.2.1 From 57e6319dd61d5ca10fe8dd57bcce8c0e2c480799 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Thu, 10 Nov 2011 13:23:39 +0000 Subject: vrtc: change its year offset from 1960 to 1972 Real world year equals the value in vrtc YEAR register plus an offset. We used 1960 as the offset to make leap year consistent, but for a device's first use, its YEAR register is 0 and the system year will be parsed as 1960 which is not a valid UNIX time and will cause many applications to fail mysteriously. So we use 1972 instead to fix this issue. Updated patch which adds a sanity check suggested by Mathias This isn't a change in behaviour for systems, because 1972 is the one we actually use. It's the old version in upstream which is out of sync with all devices. Signed-off-by: Feng Tang Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-mrst.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c index d33544802a2e..bb21f443fb70 100644 --- a/drivers/rtc/rtc-mrst.c +++ b/drivers/rtc/rtc-mrst.c @@ -76,12 +76,15 @@ static inline unsigned char vrtc_is_updating(void) /* * rtc_time's year contains the increment over 1900, but vRTC's YEAR * register can't be programmed to value larger than 0x64, so vRTC - * driver chose to use 1960 (1970 is UNIX time start point) as the base, + * driver chose to use 1972 (1970 is UNIX time start point) as the base, * and does the translation at read/write time. * - * Why not just use 1970 as the offset? it's because using 1960 will + * Why not just use 1970 as the offset? it's because using 1972 will * make it consistent in leap year setting for both vrtc and low-level - * physical rtc devices. + * physical rtc devices. Then why not use 1960 as the offset? If we use + * 1960, for a device's first use, its YEAR register is 0 and the system + * year will be parsed as 1960 which is not a valid UNIX time and will + * cause many applications to fail mysteriously. */ static int mrst_read_time(struct device *dev, struct rtc_time *time) { @@ -99,10 +102,10 @@ static int mrst_read_time(struct device *dev, struct rtc_time *time) time->tm_year = vrtc_cmos_read(RTC_YEAR); spin_unlock_irqrestore(&rtc_lock, flags); - /* Adjust for the 1960/1900 */ - time->tm_year += 60; + /* Adjust for the 1972/1900 */ + time->tm_year += 72; time->tm_mon--; - return RTC_24H; + return rtc_valid_tm(time); } static int mrst_set_time(struct device *dev, struct rtc_time *time) @@ -119,9 +122,9 @@ static int mrst_set_time(struct device *dev, struct rtc_time *time) min = time->tm_min; sec = time->tm_sec; - if (yrs < 70 || yrs > 138) + if (yrs < 72 || yrs > 138) return -EINVAL; - yrs -= 60; + yrs -= 72; spin_lock_irqsave(&rtc_lock, flags); -- cgit v1.2.1 From eb0b38a5d2c063cd8dc9e44415ce08e30d95f571 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 4 Nov 2011 20:04:41 +0800 Subject: [CPUFREQ] db8500: fix build error due to undeclared i variable The variable i is removed by commit ded8433 "[CPUFREQ] db8500: remove unneeded for loop iteration over freq_table", but current code to print available frequencies still uses the i variable. Thus add the i variable back to fix below buld error: CC drivers/cpufreq/db8500-cpufreq.o drivers/cpufreq/db8500-cpufreq.c: In function 'db8500_cpufreq_init': drivers/cpufreq/db8500-cpufreq.c:123: error: 'i' undeclared (first use in this function) drivers/cpufreq/db8500-cpufreq.c:123: error: (Each undeclared identifier is reported only once drivers/cpufreq/db8500-cpufreq.c:123: error: for each function it appears in.) make[2]: *** [drivers/cpufreq/db8500-cpufreq.o] Error 1 make[1]: *** [drivers/cpufreq] Error 2 make: *** [drivers] Error 2 This patch also fixes using uninitialized i variable as array index. Signed-off-by: Axel Lin Acked-by: Linus Walleij Signed-off-by: Dave Jones --- drivers/cpufreq/db8500-cpufreq.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c index edaa987621ea..f5002015d82e 100644 --- a/drivers/cpufreq/db8500-cpufreq.c +++ b/drivers/cpufreq/db8500-cpufreq.c @@ -109,7 +109,7 @@ static unsigned int db8500_cpufreq_getspeed(unsigned int cpu) static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy) { - int res; + int i, res; BUILD_BUG_ON(ARRAY_SIZE(idx2opp) + 1 != ARRAY_SIZE(freq_table)); @@ -120,8 +120,8 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy) freq_table[3].frequency = 1000000; } pr_info("db8500-cpufreq : Available frequencies:\n"); - while (freq_table[i].frequency != CPUFREQ_TABLE_END) - pr_info(" %d Mhz\n", freq_table[i++].frequency/1000); + for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) + pr_info(" %d Mhz\n", freq_table[i].frequency/1000); /* get policy fields based on the table */ res = cpufreq_frequency_table_cpuinfo(policy, freq_table); -- cgit v1.2.1 From a7c36fd8c5ee6dcca584137cb81aeefd785a0721 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Sat, 12 Nov 2011 11:57:29 -0500 Subject: drm/radeon/kms/combios: fix dynamic allocation of PM clock modes I missed the combios path when I updated the atombios pm code. Reported by amarsh04 on IRC. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 8bf83c4b4147..81fc100be7e1 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -2563,14 +2563,17 @@ void radeon_combios_get_power_modes(struct radeon_device *rdev) /* allocate 2 power states */ rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state) * 2, GFP_KERNEL); - if (!rdev->pm.power_state) { - rdev->pm.default_power_state_index = state_index; - rdev->pm.num_power_states = 0; - - rdev->pm.current_power_state_index = rdev->pm.default_power_state_index; - rdev->pm.current_clock_mode_index = 0; - return; - } + if (rdev->pm.power_state) { + /* allocate 1 clock mode per state */ + rdev->pm.power_state[0].clock_info = + kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL); + rdev->pm.power_state[1].clock_info = + kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL); + if (!rdev->pm.power_state[0].clock_info || + !rdev->pm.power_state[1].clock_info) + goto pm_failed; + } else + goto pm_failed; /* check for a thermal chip */ offset = combios_get_table_offset(dev, COMBIOS_OVERDRIVE_INFO_TABLE); @@ -2733,6 +2736,14 @@ default_mode: rdev->pm.default_power_state_index = state_index; rdev->pm.num_power_states = state_index + 1; + rdev->pm.current_power_state_index = rdev->pm.default_power_state_index; + rdev->pm.current_clock_mode_index = 0; + return; + +pm_failed: + rdev->pm.default_power_state_index = state_index; + rdev->pm.num_power_states = 0; + rdev->pm.current_power_state_index = rdev->pm.default_power_state_index; rdev->pm.current_clock_mode_index = 0; } -- cgit v1.2.1 From 3439a8da16bcad6b0982ece938c9f8299bb53584 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 12 Nov 2011 23:17:27 +0100 Subject: ACPI / cpuidle: Remove acpi_idle_suspend (to fix suspend regression) After commit e978aa7d7d57 ("cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state") setting acpi_idle_suspend to 1 by acpi_processor_suspend() causes the ACPI cpuidle routines to return error codes continuously, which in turn causes cpuidle to lock up (hard). However, acpi_idle_suspend doesn't appear to be useful for any particular purpose (it's racy and doesn't really provide any real protection), so it can be removed, which makes the problem go away. Reported-and-tested-by: Tomas M. Reported-and-tested-by: Ferenc Wagner Tested-by: Arnd Bergmann Signed-off-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- drivers/acpi/processor_idle.c | 29 ----------------------------- 1 file changed, 29 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 73b2909dddfe..0e8e2de2ed3e 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -224,7 +224,6 @@ static void lapic_timer_state_broadcast(struct acpi_processor *pr, /* * Suspend / resume control */ -static int acpi_idle_suspend; static u32 saved_bm_rld; static void acpi_idle_bm_rld_save(void) @@ -243,21 +242,13 @@ static void acpi_idle_bm_rld_restore(void) int acpi_processor_suspend(struct acpi_device * device, pm_message_t state) { - if (acpi_idle_suspend == 1) - return 0; - acpi_idle_bm_rld_save(); - acpi_idle_suspend = 1; return 0; } int acpi_processor_resume(struct acpi_device * device) { - if (acpi_idle_suspend == 0) - return 0; - acpi_idle_bm_rld_restore(); - acpi_idle_suspend = 0; return 0; } @@ -763,13 +754,6 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, local_irq_disable(); - /* Do not access any ACPI IO ports in suspend path */ - if (acpi_idle_suspend) { - local_irq_enable(); - cpu_relax(); - return -EINVAL; - } - lapic_timer_state_broadcast(pr, cx, 1); kt1 = ktime_get_real(); acpi_idle_do_entry(cx); @@ -810,13 +794,6 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, local_irq_disable(); - if (acpi_idle_suspend) { - local_irq_enable(); - cpu_relax(); - return -EINVAL; - } - - if (cx->entry_method != ACPI_CSTATE_FFH) { current_thread_info()->status &= ~TS_POLLING; /* @@ -895,12 +872,6 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, if (unlikely(!pr)) return -EINVAL; - - if (acpi_idle_suspend) { - cpu_relax(); - return -EINVAL; - } - if (!cx->bm_sts_skip && acpi_idle_bm_check()) { if (drv->safe_state_index >= 0) { return drv->states[drv->safe_state_index].enter(dev, -- cgit v1.2.1 From 72103bd1285211440621f2c46f4fce377584de54 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 7 Nov 2011 18:37:05 +0200 Subject: virtio-pci: fix use after free Commit 31a3ddda166cda86d2b5111e09ba4bda5239fae6 introduced a use after free in virtio-pci. The main issue is that the release method signals removal of the virtio device, while remove signals removal of the pci device. For example, on driver removal or hot-unplug, virtio_pci_release_dev is called before virtio_pci_remove. We then might get a crash as virtio_pci_remove tries to use the device freed by virtio_pci_release_dev. We allocate/free all resources together with the pci device, so we can leave the release method empty. Signed-off-by: Michael S. Tsirkin Acked-by: Amit Shah Signed-off-by: Rusty Russell Cc: stable@kernel.org --- drivers/virtio/virtio_pci.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 79a31e5b4b68..3d1bf41e8892 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -594,11 +594,11 @@ static struct virtio_config_ops virtio_pci_config_ops = { static void virtio_pci_release_dev(struct device *_d) { - struct virtio_device *dev = container_of(_d, struct virtio_device, - dev); - struct virtio_pci_device *vp_dev = to_vp_device(dev); - - kfree(vp_dev); + /* + * No need for a release method as we allocate/free + * all devices together with the pci devices. + * Provide an empty one to avoid getting a warning from core. + */ } /* the PCI probing function */ @@ -686,6 +686,7 @@ static void __devexit virtio_pci_remove(struct pci_dev *pci_dev) pci_iounmap(pci_dev, vp_dev->ioaddr); pci_release_regions(pci_dev); pci_disable_device(pci_dev); + kfree(vp_dev); } #ifdef CONFIG_PM -- cgit v1.2.1