From 0a79a0c011cb291675e3b80760a452fcba5c59d9 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 4 Dec 2014 10:27:20 +0200 Subject: iwlwifi: mvm: clear IN_HW_RESTART flag on stop() On stop(), we already cleared our internal state, and the restart_complete() callback won't be called, so simply clear the IN_HW_RESTART flag. Keeping the flag might result in invalid state on the next start(), preventing the driver starting properly. Additionally, don't take IWL_MVM_REF_UCODE_DOWN on stop() if hw restart was requested, as the ref was already taken in this case. Signed-off-by: Eliad Peller Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 31a5b3f4266c..e880f9d4717b 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1004,8 +1004,13 @@ void __iwl_mvm_mac_stop(struct iwl_mvm *mvm) { lockdep_assert_held(&mvm->mutex); - /* disallow low power states when the FW is down */ - iwl_mvm_ref(mvm, IWL_MVM_REF_UCODE_DOWN); + /* + * Disallow low power states when the FW is down by taking + * the UCODE_DOWN ref. in case of ongoing hw restart the + * ref is already taken, so don't take it again. + */ + if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) + iwl_mvm_ref(mvm, IWL_MVM_REF_UCODE_DOWN); /* async_handlers_wk is now blocked */ @@ -1023,6 +1028,12 @@ void __iwl_mvm_mac_stop(struct iwl_mvm *mvm) /* the fw is stopped, the aux sta is dead: clean up driver state */ iwl_mvm_del_aux_sta(mvm); + /* + * Clear IN_HW_RESTART flag when stopping the hw (as restart_complete() + * won't be called in this case). + */ + clear_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status); + mvm->ucode_loaded = false; } -- cgit v1.2.1 From 03d6c3b0fa4f5f0379cede079ec828a6c999fe43 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 3 Dec 2014 10:39:07 +0200 Subject: iwlwifi: pcie: re-ACK all interrupts after device reset When we reset the device, the CSR_INT gets cleared as well as CSR_INT_MASK. Meaning that we shouldn't get any interrupt but, due to a hardware bug, recent devices will keep sending interrupts. This leads to an interrupt storm while stopping the device. The way to fix this is to ACK all the interrupts after the device is reset so that the value of CSR_INT will stay 0xffffffff. Fixes: 522713c81e4e ("iwlwifi: pcie: properly reset the device") Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/pcie/trans.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 5d79a1f44b8e..d151af36b6cc 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1012,16 +1012,21 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) /* Stop the device, and put it in low power state */ iwl_pcie_apm_stop(trans); - /* Upon stop, the APM issues an interrupt if HW RF kill is set. - * Clean again the interrupt here + /* stop and reset the on-board processor */ + iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); + udelay(20); + + /* + * Upon stop, the APM issues an interrupt if HW RF kill is set. + * This is a bug in certain verions of the hardware. + * Certain devices also keep sending HW RF kill interrupt all + * the time, unless the interrupt is ACKed even if the interrupt + * should be masked. Re-ACK all the interrupts here. */ spin_lock(&trans_pcie->irq_lock); iwl_disable_interrupts(trans); spin_unlock(&trans_pcie->irq_lock); - /* stop and reset the on-board processor */ - iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); - udelay(20); /* clear all status bits */ clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status); -- cgit v1.2.1 From 31a5a09c1c5c888181e86a951a9a6c3ec27f7642 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 3 Dec 2014 08:25:44 +0200 Subject: iwlwifi: don't double free a pointer if no FW was found In the very unlikely case in which no firmware could be, found. the same pointer was freed twice. Fix that. Fixes: 490fefebb6db ("iwlwifi: define the .ucode file format for debug") Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index 38de1513e4de..850b85a47806 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -1323,10 +1323,10 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context) try_again: /* try next, if any */ - kfree(pieces); release_firmware(ucode_raw); if (iwl_request_firmware(drv, false)) goto out_unbind; + kfree(pieces); return; out_free_fw: -- cgit v1.2.1 From 55fd1ce820f461b77919a1997ba8285652219024 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 2 Dec 2014 22:09:55 +0200 Subject: iwlwifi: add new device IDs for 3165 A few device IDs were added, reflect this change in the driver. Cc; [3.13+] Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/pcie/drv.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index 3ee8e3848876..2f0c4b170344 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -367,7 +367,11 @@ static const struct pci_device_id iwl_hw_card_ids[] = { /* 3165 Series */ {IWL_PCI_DEVICE(0x3165, 0x4010, iwl3165_2ac_cfg)}, + {IWL_PCI_DEVICE(0x3165, 0x4012, iwl3165_2ac_cfg)}, + {IWL_PCI_DEVICE(0x3165, 0x4110, iwl3165_2ac_cfg)}, {IWL_PCI_DEVICE(0x3165, 0x4210, iwl3165_2ac_cfg)}, + {IWL_PCI_DEVICE(0x3165, 0x4410, iwl3165_2ac_cfg)}, + {IWL_PCI_DEVICE(0x3165, 0x4510, iwl3165_2ac_cfg)}, /* 7265 Series */ {IWL_PCI_DEVICE(0x095A, 0x5010, iwl7265_2ac_cfg)}, -- cgit v1.2.1 From baa21e834941ee5fbe4bd421c871f7c0c5f9a086 Mon Sep 17 00:00:00 2001 From: Liad Kaufman Date: Tue, 2 Dec 2014 14:28:45 +0200 Subject: iwlwifi: pcie: limit fw chunk sizes given to fh New FW has chunks that are larger than the size limit of the FH's DMA. To make sure we don't crash it - actively limit the max size of each chunk. Signed-off-by: Liad Kaufman Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-fh.h | 1 + drivers/net/wireless/iwlwifi/pcie/trans.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index 9564ae173d06..1f7f15eb86da 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -310,6 +310,7 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl) #define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) #define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT 28 +#define FH_MEM_TB_MAX_LENGTH (0x00020000) /* TFDB Area - TFDs buffer table */ #define FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF) diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index d151af36b6cc..523fe0c88dcb 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -614,7 +614,7 @@ static int iwl_pcie_load_section(struct iwl_trans *trans, u8 section_num, { u8 *v_addr; dma_addr_t p_addr; - u32 offset, chunk_sz = section->len; + u32 offset, chunk_sz = min_t(u32, FH_MEM_TB_MAX_LENGTH, section->len); int ret = 0; IWL_DEBUG_FW(trans, "[%d] uCode section being loaded...\n", -- cgit v1.2.1 From 4f2ff8ef9eab32e6bc01c71bb539fc68d0917f59 Mon Sep 17 00:00:00 2001 From: Li RongQing Date: Fri, 19 Dec 2014 13:19:35 +0800 Subject: sunvnet: fix a memory leak in vnet_handle_offloads when skb_gso_segment returns error, the original skb should be freed Signed-off-by: Li RongQing Acked-by: David L Stevens Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/sunvnet.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c index 45c408ef67d0..d2835bf7b4fb 100644 --- a/drivers/net/ethernet/sun/sunvnet.c +++ b/drivers/net/ethernet/sun/sunvnet.c @@ -1201,6 +1201,7 @@ static int vnet_handle_offloads(struct vnet_port *port, struct sk_buff *skb) segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO); if (IS_ERR(segs)) { dev->stats.tx_dropped++; + dev_kfree_skb_any(skb); return NETDEV_TX_OK; } -- cgit v1.2.1 From 17e96834fd35997ca7cdfbf15413bcd5a36ad448 Mon Sep 17 00:00:00 2001 From: Govindarajulu Varadarajan <_govind@gmx.com> Date: Thu, 18 Dec 2014 15:58:42 +0530 Subject: enic: fix rx skb checksum Hardware always provides compliment of IP pseudo checksum. Stack expects whole packet checksum without pseudo checksum if CHECKSUM_COMPLETE is set. This causes checksum error in nf & ovs. kernel: qg-19546f09-f2: hw csum failure kernel: CPU: 9 PID: 0 Comm: swapper/9 Tainted: GF O-------------- 3.10.0-123.8.1.el7.x86_64 #1 kernel: Hardware name: Cisco Systems Inc UCSB-B200-M3/UCSB-B200-M3, BIOS B200M3.2.2.3.0.080820141339 08/08/2014 kernel: ffff881218f40000 df68243feb35e3a8 ffff881237a43ab8 ffffffff815e237b kernel: ffff881237a43ad0 ffffffff814cd4ca ffff8829ec71eb00 ffff881237a43af0 kernel: ffffffff814c6232 0000000000000286 ffff8829ec71eb00 ffff881237a43b00 kernel: Call Trace: kernel: [] dump_stack+0x19/0x1b kernel: [] netdev_rx_csum_fault+0x3a/0x40 kernel: [] __skb_checksum_complete_head+0x62/0x70 kernel: [] __skb_checksum_complete+0x11/0x20 kernel: [] nf_ip_checksum+0xcc/0x100 kernel: [] icmp_error+0x1f7/0x35c [nf_conntrack_ipv4] kernel: [] ? netif_rx+0xb9/0x1d0 kernel: [] ? internal_dev_recv+0xdb/0x130 [openvswitch] kernel: [] nf_conntrack_in+0xf0/0xa80 [nf_conntrack] kernel: [] ? inet_del_offload+0x40/0x40 kernel: [] ipv4_conntrack_in+0x22/0x30 [nf_conntrack_ipv4] kernel: [] nf_iterate+0xaa/0xc0 kernel: [] ? inet_del_offload+0x40/0x40 kernel: [] nf_hook_slow+0x84/0x140 kernel: [] ? inet_del_offload+0x40/0x40 kernel: [] ip_rcv+0x344/0x380 Hardware verifies IP & tcp/udp header checksum but does not provide payload checksum, use CHECKSUM_UNNECESSARY. Set it only if its valid IP tcp/udp packet. Cc: Jiri Benc Cc: Stefan Assmann Reported-by: Sunil Choudhary Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Reviewed-by: Jiri Benc Signed-off-by: David S. Miller --- drivers/net/ethernet/cisco/enic/enic_main.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c index 868d0f605d60..705f334ebb85 100644 --- a/drivers/net/ethernet/cisco/enic/enic_main.c +++ b/drivers/net/ethernet/cisco/enic/enic_main.c @@ -1060,10 +1060,14 @@ static void enic_rq_indicate_buf(struct vnic_rq *rq, PKT_HASH_TYPE_L4 : PKT_HASH_TYPE_L3); } - if ((netdev->features & NETIF_F_RXCSUM) && !csum_not_calc) { - skb->csum = htons(checksum); - skb->ip_summed = CHECKSUM_COMPLETE; - } + /* Hardware does not provide whole packet checksum. It only + * provides pseudo checksum. Since hw validates the packet + * checksum but not provide us the checksum value. use + * CHECSUM_UNNECESSARY. + */ + if ((netdev->features & NETIF_F_RXCSUM) && tcp_udp_csum_ok && + ipv4_csum_ok) + skb->ip_summed = CHECKSUM_UNNECESSARY; if (vlan_stripped) __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tci); -- cgit v1.2.1 From fe13192911507c49002fc4882ef11f75f529a010 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Fri, 19 Dec 2014 22:38:18 +0800 Subject: stmmac: Don't init ptp again when resume from suspend/hibernation Both stmmac_open() and stmmac_resume() call stmmac_hw_setup(), and stmmac_hw_setup() call stmmac_init_ptp() unconditionally. However, only stmmac_release() calls stmmac_release_ptp(). Since stmmac_suspend() doesn't call stmmac_release_ptp(), stmmac_resume() also needn't call stmmac_init_ptp(). This patch also fix a "scheduling while atomic" problem when resume from suspend/hibernation. Because stmmac_init_ptp() will trigger scheduling while stmmac_resume() hold a spinlock. Callgraph of "scheduling while atomic": stmmac_resume() --> stmmac_hw_setup() --> stmmac_init_ptp() --> stmmac_ptp_register() --> ptp_clock_register() --> device_create() --> device_create_groups_vargs() --> device_add() --> devtmpfs_create_node() --> wait_for_common() --> schedule_timeout() --> __schedule() Signed-off-by: Huacai Chen Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 118a427d1942..8c6b7c1651e5 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1671,7 +1671,7 @@ static void stmmac_init_tx_coalesce(struct stmmac_priv *priv) * 0 on success and an appropriate (-)ve integer as defined in errno.h * file on failure. */ -static int stmmac_hw_setup(struct net_device *dev) +static int stmmac_hw_setup(struct net_device *dev, bool init_ptp) { struct stmmac_priv *priv = netdev_priv(dev); int ret; @@ -1708,9 +1708,11 @@ static int stmmac_hw_setup(struct net_device *dev) stmmac_mmc_setup(priv); - ret = stmmac_init_ptp(priv); - if (ret && ret != -EOPNOTSUPP) - pr_warn("%s: failed PTP initialisation\n", __func__); + if (init_ptp) { + ret = stmmac_init_ptp(priv); + if (ret && ret != -EOPNOTSUPP) + pr_warn("%s: failed PTP initialisation\n", __func__); + } #ifdef CONFIG_DEBUG_FS ret = stmmac_init_fs(dev); @@ -1787,7 +1789,7 @@ static int stmmac_open(struct net_device *dev) goto init_error; } - ret = stmmac_hw_setup(dev); + ret = stmmac_hw_setup(dev, true); if (ret < 0) { pr_err("%s: Hw setup failed\n", __func__); goto init_error; @@ -3036,7 +3038,7 @@ int stmmac_resume(struct net_device *ndev) netif_device_attach(ndev); init_dma_desc_rings(ndev, GFP_ATOMIC); - stmmac_hw_setup(ndev); + stmmac_hw_setup(ndev, false); stmmac_init_tx_coalesce(priv); napi_enable(&priv->napi); -- cgit v1.2.1 From 8acdf999accfd95093db17f33a58429a38782060 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 20 Dec 2014 11:23:27 +1100 Subject: virtio_net: Fix napi poll list corruption The commit d75b1ade567ffab085e8adbbdacf0092d10cd09c (net: less interrupt masking in NAPI) breaks virtio_net in an insidious way. It is now required that if the entire budget is consumed when poll returns, the napi poll_list must remain empty. However, like some other drivers virtio_net tries to do a last-ditch check and if there is more work it will call napi_schedule and then immediately process some of this new work. Should the entire budget be consumed while processing such new work then we will violate the new caller contract. This patch fixes this by not touching any work when we reschedule in virtio_net. The worst part of this bug is that the list corruption causes other napi users to be moved off-list. In my case I was chasing a stall in IPsec (IPsec uses netif_rx) and I only belatedly realised that it was virtio_net which caused the stall even though the virtio_net poll was still functioning perfectly after IPsec stalled. Signed-off-by: Herbert Xu Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index b8bd7191572d..5ca97713bfb3 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -760,7 +760,6 @@ static int virtnet_poll(struct napi_struct *napi, int budget) container_of(napi, struct receive_queue, napi); unsigned int r, received = 0; -again: received += virtnet_receive(rq, budget - received); /* Out of packets? */ @@ -771,7 +770,6 @@ again: napi_schedule_prep(napi)) { virtqueue_disable_cb(rq->vq); __napi_schedule(napi); - goto again; } } -- cgit v1.2.1 From c51ed18257e731e15541324cd58bd3761d9d3b1c Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Fri, 19 Dec 2014 18:25:18 -0800 Subject: hyperv: Fix some variable name typos in send-buffer init/revoke The changed names are union fields with the same size, so the existing code still works. But, we now update these variables to the correct names. Signed-off-by: Haiyang Zhang Reviewed-by: K. Y. Srinivasan Signed-off-by: David S. Miller --- drivers/net/hyperv/hyperv_net.h | 1 + drivers/net/hyperv/netvsc.c | 15 ++++++++------- 2 files changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h index 2f48f790c9b4..384ca4f4de4a 100644 --- a/drivers/net/hyperv/hyperv_net.h +++ b/drivers/net/hyperv/hyperv_net.h @@ -590,6 +590,7 @@ struct nvsp_message { #define NETVSC_RECEIVE_BUFFER_ID 0xcafe +#define NETVSC_SEND_BUFFER_ID 0 #define NETVSC_PACKET_SIZE 4096 diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index dd867e6cabd6..9f49c0129a78 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -161,8 +161,8 @@ static int netvsc_destroy_buf(struct netvsc_device *net_device) /* Deal with the send buffer we may have setup. * If we got a send section size, it means we received a - * SendsendBufferComplete msg (ie sent - * NvspMessage1TypeSendReceiveBuffer msg) therefore, we need + * NVSP_MSG1_TYPE_SEND_SEND_BUF_COMPLETE msg (ie sent + * NVSP_MSG1_TYPE_SEND_SEND_BUF msg) therefore, we need * to send a revoke msg here */ if (net_device->send_section_size) { @@ -172,7 +172,8 @@ static int netvsc_destroy_buf(struct netvsc_device *net_device) revoke_packet->hdr.msg_type = NVSP_MSG1_TYPE_REVOKE_SEND_BUF; - revoke_packet->msg.v1_msg.revoke_recv_buf.id = 0; + revoke_packet->msg.v1_msg.revoke_send_buf.id = + NETVSC_SEND_BUFFER_ID; ret = vmbus_sendpacket(net_device->dev->channel, revoke_packet, @@ -204,7 +205,7 @@ static int netvsc_destroy_buf(struct netvsc_device *net_device) net_device->send_buf_gpadl_handle = 0; } if (net_device->send_buf) { - /* Free up the receive buffer */ + /* Free up the send buffer */ vfree(net_device->send_buf); net_device->send_buf = NULL; } @@ -339,9 +340,9 @@ static int netvsc_init_buf(struct hv_device *device) init_packet = &net_device->channel_init_pkt; memset(init_packet, 0, sizeof(struct nvsp_message)); init_packet->hdr.msg_type = NVSP_MSG1_TYPE_SEND_SEND_BUF; - init_packet->msg.v1_msg.send_recv_buf.gpadl_handle = + init_packet->msg.v1_msg.send_send_buf.gpadl_handle = net_device->send_buf_gpadl_handle; - init_packet->msg.v1_msg.send_recv_buf.id = 0; + init_packet->msg.v1_msg.send_send_buf.id = NETVSC_SEND_BUFFER_ID; /* Send the gpadl notification request */ ret = vmbus_sendpacket(device->channel, init_packet, @@ -364,7 +365,7 @@ static int netvsc_init_buf(struct hv_device *device) netdev_err(ndev, "Unable to complete send buffer " "initialization with NetVsp - status %d\n", init_packet->msg.v1_msg. - send_recv_buf_complete.status); + send_send_buf_complete.status); ret = -EINVAL; goto cleanup; } -- cgit v1.2.1 From 05b0aa579397b734f127af58e401a30784a1e315 Mon Sep 17 00:00:00 2001 From: Prashant Sreedharan Date: Sat, 20 Dec 2014 12:16:17 -0800 Subject: tg3: tg3_disable_ints using uninitialized mailbox value to disable interrupts During driver load in tg3_init_one, if the driver detects DMA activity before intializing the chip tg3_halt is called. As part of tg3_halt interrupts are disabled using routine tg3_disable_ints. This routine was using mailbox value which was not initialized (default value is 0). As a result driver was writing 0x00000001 to pci config space register 0, which is the vendor id / device id. This driver bug was exposed because of the commit a7877b17a667 (PCI: Check only the Vendor ID to identify Configuration Request Retry). Also this issue is only seen in older generation chipsets like 5722 because config space write to offset 0 from driver is possible. The newer generation chips ignore writes to offset 0. Also without commit a7877b17a667, for these older chips when a GRC reset is issued the Bootcode would reprogram the vendor id/device id, which is the reason this bug was masked earlier. Fixed by initializing the interrupt mailbox registers before calling tg3_halt. Please queue for -stable. Reported-by: Nils Holland Reported-by: Marcelo Ricardo Leitner Signed-off-by: Prashant Sreedharan Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index bb48a610b72a..553dcd8a9df2 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -17800,23 +17800,6 @@ static int tg3_init_one(struct pci_dev *pdev, goto err_out_apeunmap; } - /* - * Reset chip in case UNDI or EFI driver did not shutdown - * DMA self test will enable WDMAC and we'll see (spurious) - * pending DMA on the PCI bus at that point. - */ - if ((tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE) || - (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { - tw32(MEMARB_MODE, MEMARB_MODE_ENABLE); - tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); - } - - err = tg3_test_dma(tp); - if (err) { - dev_err(&pdev->dev, "DMA engine test failed, aborting\n"); - goto err_out_apeunmap; - } - intmbx = MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW; rcvmbx = MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW; sndmbx = MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW; @@ -17861,6 +17844,23 @@ static int tg3_init_one(struct pci_dev *pdev, sndmbx += 0xc; } + /* + * Reset chip in case UNDI or EFI driver did not shutdown + * DMA self test will enable WDMAC and we'll see (spurious) + * pending DMA on the PCI bus at that point. + */ + if ((tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE) || + (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { + tw32(MEMARB_MODE, MEMARB_MODE_ENABLE); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); + } + + err = tg3_test_dma(tp); + if (err) { + dev_err(&pdev->dev, "DMA engine test failed, aborting\n"); + goto err_out_apeunmap; + } + tg3_init_coal(tp); pci_set_drvdata(pdev, dev); -- cgit v1.2.1 From 62633b8adb1b4c675b6f1bedc44eaa9062b02301 Mon Sep 17 00:00:00 2001 From: Rickard Strandqvist Date: Sun, 21 Dec 2014 18:41:38 +0100 Subject: net: ethernet: micrel: ksz884x.c: Remove unused function Remove the function port_cfg_dis_learn() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/ksz884x.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c index f1ebed6c63b1..2fa6ae026e4f 100644 --- a/drivers/net/ethernet/micrel/ksz884x.c +++ b/drivers/net/ethernet/micrel/ksz884x.c @@ -2303,12 +2303,6 @@ static inline int port_chk_force_flow_ctrl(struct ksz_hw *hw, int p) /* Spanning Tree */ -static inline void port_cfg_dis_learn(struct ksz_hw *hw, int p, int set) -{ - port_cfg(hw, p, - KS8842_PORT_CTRL_2_OFFSET, PORT_LEARN_DISABLE, set); -} - static inline void port_cfg_rx(struct ksz_hw *hw, int p, int set) { port_cfg(hw, p, -- cgit v1.2.1 From f3ba9d490d6e9371bbda5f45a22b6b3313125f97 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Daniel=20Gl=C3=B6ckner?= Date: Sun, 21 Dec 2014 20:27:39 +0100 Subject: net: s6gmac: remove driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The s6000 Xtensa support has been removed from the kernel in 4006e565e1500db4. There are no other chips using this driver. While the Mentor/Alcatel PE-MCXMAC IP core is also used in other designs (Freescale Gianfar/UCC, QLogic NetXen, Solarflare, Agere ET-1310, Netlogic XLR/XLS), none of these use this driver as it heavily depends on the s6000 DMA engine. In fact, there is no code sharing across any of the aforementioned devices. Signed-off-by: Daniel Glöckner Signed-off-by: David S. Miller --- drivers/net/ethernet/Kconfig | 12 - drivers/net/ethernet/Makefile | 1 - drivers/net/ethernet/s6gmac.c | 1058 ----------------------------------------- 3 files changed, 1071 deletions(-) delete mode 100644 drivers/net/ethernet/s6gmac.c (limited to 'drivers') diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index df76050d0a9d..eadcb053807e 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -156,18 +156,6 @@ source "drivers/net/ethernet/realtek/Kconfig" source "drivers/net/ethernet/renesas/Kconfig" source "drivers/net/ethernet/rdc/Kconfig" source "drivers/net/ethernet/rocker/Kconfig" - -config S6GMAC - tristate "S6105 GMAC ethernet support" - depends on XTENSA_VARIANT_S6000 - select PHYLIB - ---help--- - This driver supports the on chip ethernet device on the - S6105 xtensa processor. - - To compile this driver as a module, choose M here. The module - will be called s6gmac. - source "drivers/net/ethernet/samsung/Kconfig" source "drivers/net/ethernet/seeq/Kconfig" source "drivers/net/ethernet/silan/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index bf56f8b36e90..1367afcd0a8b 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -66,7 +66,6 @@ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/ obj-$(CONFIG_SH_ETH) += renesas/ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/ obj-$(CONFIG_NET_VENDOR_ROCKER) += rocker/ -obj-$(CONFIG_S6GMAC) += s6gmac.o obj-$(CONFIG_NET_VENDOR_SAMSUNG) += samsung/ obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/ obj-$(CONFIG_NET_VENDOR_SILAN) += silan/ diff --git a/drivers/net/ethernet/s6gmac.c b/drivers/net/ethernet/s6gmac.c deleted file mode 100644 index f537cbea20e5..000000000000 --- a/drivers/net/ethernet/s6gmac.c +++ /dev/null @@ -1,1058 +0,0 @@ -/* - * Ethernet driver for S6105 on chip network device - * (c)2008 emlix GmbH http://www.emlix.com - * Authors: Oskar Schirmer - * Daniel Gloeckner - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "s6gmac" -#define DRV_PRMT DRV_NAME ": " - - -/* register declarations */ - -#define S6_GMAC_MACCONF1 0x000 -#define S6_GMAC_MACCONF1_TXENA 0 -#define S6_GMAC_MACCONF1_SYNCTX 1 -#define S6_GMAC_MACCONF1_RXENA 2 -#define S6_GMAC_MACCONF1_SYNCRX 3 -#define S6_GMAC_MACCONF1_TXFLOWCTRL 4 -#define S6_GMAC_MACCONF1_RXFLOWCTRL 5 -#define S6_GMAC_MACCONF1_LOOPBACK 8 -#define S6_GMAC_MACCONF1_RESTXFUNC 16 -#define S6_GMAC_MACCONF1_RESRXFUNC 17 -#define S6_GMAC_MACCONF1_RESTXMACCTRL 18 -#define S6_GMAC_MACCONF1_RESRXMACCTRL 19 -#define S6_GMAC_MACCONF1_SIMULRES 30 -#define S6_GMAC_MACCONF1_SOFTRES 31 -#define S6_GMAC_MACCONF2 0x004 -#define S6_GMAC_MACCONF2_FULL 0 -#define S6_GMAC_MACCONF2_CRCENA 1 -#define S6_GMAC_MACCONF2_PADCRCENA 2 -#define S6_GMAC_MACCONF2_LENGTHFCHK 4 -#define S6_GMAC_MACCONF2_HUGEFRAMENA 5 -#define S6_GMAC_MACCONF2_IFMODE 8 -#define S6_GMAC_MACCONF2_IFMODE_NIBBLE 1 -#define S6_GMAC_MACCONF2_IFMODE_BYTE 2 -#define S6_GMAC_MACCONF2_IFMODE_MASK 3 -#define S6_GMAC_MACCONF2_PREAMBLELEN 12 -#define S6_GMAC_MACCONF2_PREAMBLELEN_MASK 0x0F -#define S6_GMAC_MACIPGIFG 0x008 -#define S6_GMAC_MACIPGIFG_B2BINTERPGAP 0 -#define S6_GMAC_MACIPGIFG_B2BINTERPGAP_MASK 0x7F -#define S6_GMAC_MACIPGIFG_MINIFGENFORCE 8 -#define S6_GMAC_MACIPGIFG_B2BINTERPGAP2 16 -#define S6_GMAC_MACIPGIFG_B2BINTERPGAP1 24 -#define S6_GMAC_MACHALFDUPLEX 0x00C -#define S6_GMAC_MACHALFDUPLEX_COLLISWIN 0 -#define S6_GMAC_MACHALFDUPLEX_COLLISWIN_MASK 0x3F -#define S6_GMAC_MACHALFDUPLEX_RETXMAX 12 -#define S6_GMAC_MACHALFDUPLEX_RETXMAX_MASK 0x0F -#define S6_GMAC_MACHALFDUPLEX_EXCESSDEF 16 -#define S6_GMAC_MACHALFDUPLEX_NOBACKOFF 17 -#define S6_GMAC_MACHALFDUPLEX_BPNOBCKOF 18 -#define S6_GMAC_MACHALFDUPLEX_ALTBEBENA 19 -#define S6_GMAC_MACHALFDUPLEX_ALTBEBTRN 20 -#define S6_GMAC_MACHALFDUPLEX_ALTBEBTR_MASK 0x0F -#define S6_GMAC_MACMAXFRAMELEN 0x010 -#define S6_GMAC_MACMIICONF 0x020 -#define S6_GMAC_MACMIICONF_CSEL 0 -#define S6_GMAC_MACMIICONF_CSEL_DIV10 0 -#define S6_GMAC_MACMIICONF_CSEL_DIV12 1 -#define S6_GMAC_MACMIICONF_CSEL_DIV14 2 -#define S6_GMAC_MACMIICONF_CSEL_DIV18 3 -#define S6_GMAC_MACMIICONF_CSEL_DIV24 4 -#define S6_GMAC_MACMIICONF_CSEL_DIV34 5 -#define S6_GMAC_MACMIICONF_CSEL_DIV68 6 -#define S6_GMAC_MACMIICONF_CSEL_DIV168 7 -#define S6_GMAC_MACMIICONF_CSEL_MASK 7 -#define S6_GMAC_MACMIICONF_PREAMBLESUPR 4 -#define S6_GMAC_MACMIICONF_SCANAUTOINCR 5 -#define S6_GMAC_MACMIICMD 0x024 -#define S6_GMAC_MACMIICMD_READ 0 -#define S6_GMAC_MACMIICMD_SCAN 1 -#define S6_GMAC_MACMIIADDR 0x028 -#define S6_GMAC_MACMIIADDR_REG 0 -#define S6_GMAC_MACMIIADDR_REG_MASK 0x1F -#define S6_GMAC_MACMIIADDR_PHY 8 -#define S6_GMAC_MACMIIADDR_PHY_MASK 0x1F -#define S6_GMAC_MACMIICTRL 0x02C -#define S6_GMAC_MACMIISTAT 0x030 -#define S6_GMAC_MACMIIINDI 0x034 -#define S6_GMAC_MACMIIINDI_BUSY 0 -#define S6_GMAC_MACMIIINDI_SCAN 1 -#define S6_GMAC_MACMIIINDI_INVAL 2 -#define S6_GMAC_MACINTERFSTAT 0x03C -#define S6_GMAC_MACINTERFSTAT_LINKFAIL 3 -#define S6_GMAC_MACINTERFSTAT_EXCESSDEF 9 -#define S6_GMAC_MACSTATADDR1 0x040 -#define S6_GMAC_MACSTATADDR2 0x044 - -#define S6_GMAC_FIFOCONF0 0x048 -#define S6_GMAC_FIFOCONF0_HSTRSTWT 0 -#define S6_GMAC_FIFOCONF0_HSTRSTSR 1 -#define S6_GMAC_FIFOCONF0_HSTRSTFR 2 -#define S6_GMAC_FIFOCONF0_HSTRSTST 3 -#define S6_GMAC_FIFOCONF0_HSTRSTFT 4 -#define S6_GMAC_FIFOCONF0_WTMENREQ 8 -#define S6_GMAC_FIFOCONF0_SRFENREQ 9 -#define S6_GMAC_FIFOCONF0_FRFENREQ 10 -#define S6_GMAC_FIFOCONF0_STFENREQ 11 -#define S6_GMAC_FIFOCONF0_FTFENREQ 12 -#define S6_GMAC_FIFOCONF0_WTMENRPLY 16 -#define S6_GMAC_FIFOCONF0_SRFENRPLY 17 -#define S6_GMAC_FIFOCONF0_FRFENRPLY 18 -#define S6_GMAC_FIFOCONF0_STFENRPLY 19 -#define S6_GMAC_FIFOCONF0_FTFENRPLY 20 -#define S6_GMAC_FIFOCONF1 0x04C -#define S6_GMAC_FIFOCONF2 0x050 -#define S6_GMAC_FIFOCONF2_CFGLWM 0 -#define S6_GMAC_FIFOCONF2_CFGHWM 16 -#define S6_GMAC_FIFOCONF3 0x054 -#define S6_GMAC_FIFOCONF3_CFGFTTH 0 -#define S6_GMAC_FIFOCONF3_CFGHWMFT 16 -#define S6_GMAC_FIFOCONF4 0x058 -#define S6_GMAC_FIFOCONF_RSV_PREVDROP 0 -#define S6_GMAC_FIFOCONF_RSV_RUNT 1 -#define S6_GMAC_FIFOCONF_RSV_FALSECAR 2 -#define S6_GMAC_FIFOCONF_RSV_CODEERR 3 -#define S6_GMAC_FIFOCONF_RSV_CRCERR 4 -#define S6_GMAC_FIFOCONF_RSV_LENGTHERR 5 -#define S6_GMAC_FIFOCONF_RSV_LENRANGE 6 -#define S6_GMAC_FIFOCONF_RSV_OK 7 -#define S6_GMAC_FIFOCONF_RSV_MULTICAST 8 -#define S6_GMAC_FIFOCONF_RSV_BROADCAST 9 -#define S6_GMAC_FIFOCONF_RSV_DRIBBLE 10 -#define S6_GMAC_FIFOCONF_RSV_CTRLFRAME 11 -#define S6_GMAC_FIFOCONF_RSV_PAUSECTRL 12 -#define S6_GMAC_FIFOCONF_RSV_UNOPCODE 13 -#define S6_GMAC_FIFOCONF_RSV_VLANTAG 14 -#define S6_GMAC_FIFOCONF_RSV_LONGEVENT 15 -#define S6_GMAC_FIFOCONF_RSV_TRUNCATED 16 -#define S6_GMAC_FIFOCONF_RSV_MASK 0x3FFFF -#define S6_GMAC_FIFOCONF5 0x05C -#define S6_GMAC_FIFOCONF5_DROPLT64 18 -#define S6_GMAC_FIFOCONF5_CFGBYTM 19 -#define S6_GMAC_FIFOCONF5_RXDROPSIZE 20 -#define S6_GMAC_FIFOCONF5_RXDROPSIZE_MASK 0xF - -#define S6_GMAC_STAT_REGS 0x080 -#define S6_GMAC_STAT_SIZE_MIN 12 -#define S6_GMAC_STATTR64 0x080 -#define S6_GMAC_STATTR64_SIZE 18 -#define S6_GMAC_STATTR127 0x084 -#define S6_GMAC_STATTR127_SIZE 18 -#define S6_GMAC_STATTR255 0x088 -#define S6_GMAC_STATTR255_SIZE 18 -#define S6_GMAC_STATTR511 0x08C -#define S6_GMAC_STATTR511_SIZE 18 -#define S6_GMAC_STATTR1K 0x090 -#define S6_GMAC_STATTR1K_SIZE 18 -#define S6_GMAC_STATTRMAX 0x094 -#define S6_GMAC_STATTRMAX_SIZE 18 -#define S6_GMAC_STATTRMGV 0x098 -#define S6_GMAC_STATTRMGV_SIZE 18 -#define S6_GMAC_STATRBYT 0x09C -#define S6_GMAC_STATRBYT_SIZE 24 -#define S6_GMAC_STATRPKT 0x0A0 -#define S6_GMAC_STATRPKT_SIZE 18 -#define S6_GMAC_STATRFCS 0x0A4 -#define S6_GMAC_STATRFCS_SIZE 12 -#define S6_GMAC_STATRMCA 0x0A8 -#define S6_GMAC_STATRMCA_SIZE 18 -#define S6_GMAC_STATRBCA 0x0AC -#define S6_GMAC_STATRBCA_SIZE 22 -#define S6_GMAC_STATRXCF 0x0B0 -#define S6_GMAC_STATRXCF_SIZE 18 -#define S6_GMAC_STATRXPF 0x0B4 -#define S6_GMAC_STATRXPF_SIZE 12 -#define S6_GMAC_STATRXUO 0x0B8 -#define S6_GMAC_STATRXUO_SIZE 12 -#define S6_GMAC_STATRALN 0x0BC -#define S6_GMAC_STATRALN_SIZE 12 -#define S6_GMAC_STATRFLR 0x0C0 -#define S6_GMAC_STATRFLR_SIZE 16 -#define S6_GMAC_STATRCDE 0x0C4 -#define S6_GMAC_STATRCDE_SIZE 12 -#define S6_GMAC_STATRCSE 0x0C8 -#define S6_GMAC_STATRCSE_SIZE 12 -#define S6_GMAC_STATRUND 0x0CC -#define S6_GMAC_STATRUND_SIZE 12 -#define S6_GMAC_STATROVR 0x0D0 -#define S6_GMAC_STATROVR_SIZE 12 -#define S6_GMAC_STATRFRG 0x0D4 -#define S6_GMAC_STATRFRG_SIZE 12 -#define S6_GMAC_STATRJBR 0x0D8 -#define S6_GMAC_STATRJBR_SIZE 12 -#define S6_GMAC_STATRDRP 0x0DC -#define S6_GMAC_STATRDRP_SIZE 12 -#define S6_GMAC_STATTBYT 0x0E0 -#define S6_GMAC_STATTBYT_SIZE 24 -#define S6_GMAC_STATTPKT 0x0E4 -#define S6_GMAC_STATTPKT_SIZE 18 -#define S6_GMAC_STATTMCA 0x0E8 -#define S6_GMAC_STATTMCA_SIZE 18 -#define S6_GMAC_STATTBCA 0x0EC -#define S6_GMAC_STATTBCA_SIZE 18 -#define S6_GMAC_STATTXPF 0x0F0 -#define S6_GMAC_STATTXPF_SIZE 12 -#define S6_GMAC_STATTDFR 0x0F4 -#define S6_GMAC_STATTDFR_SIZE 12 -#define S6_GMAC_STATTEDF 0x0F8 -#define S6_GMAC_STATTEDF_SIZE 12 -#define S6_GMAC_STATTSCL 0x0FC -#define S6_GMAC_STATTSCL_SIZE 12 -#define S6_GMAC_STATTMCL 0x100 -#define S6_GMAC_STATTMCL_SIZE 12 -#define S6_GMAC_STATTLCL 0x104 -#define S6_GMAC_STATTLCL_SIZE 12 -#define S6_GMAC_STATTXCL 0x108 -#define S6_GMAC_STATTXCL_SIZE 12 -#define S6_GMAC_STATTNCL 0x10C -#define S6_GMAC_STATTNCL_SIZE 13 -#define S6_GMAC_STATTPFH 0x110 -#define S6_GMAC_STATTPFH_SIZE 12 -#define S6_GMAC_STATTDRP 0x114 -#define S6_GMAC_STATTDRP_SIZE 12 -#define S6_GMAC_STATTJBR 0x118 -#define S6_GMAC_STATTJBR_SIZE 12 -#define S6_GMAC_STATTFCS 0x11C -#define S6_GMAC_STATTFCS_SIZE 12 -#define S6_GMAC_STATTXCF 0x120 -#define S6_GMAC_STATTXCF_SIZE 12 -#define S6_GMAC_STATTOVR 0x124 -#define S6_GMAC_STATTOVR_SIZE 12 -#define S6_GMAC_STATTUND 0x128 -#define S6_GMAC_STATTUND_SIZE 12 -#define S6_GMAC_STATTFRG 0x12C -#define S6_GMAC_STATTFRG_SIZE 12 -#define S6_GMAC_STATCARRY(n) (0x130 + 4*(n)) -#define S6_GMAC_STATCARRYMSK(n) (0x138 + 4*(n)) -#define S6_GMAC_STATCARRY1_RDRP 0 -#define S6_GMAC_STATCARRY1_RJBR 1 -#define S6_GMAC_STATCARRY1_RFRG 2 -#define S6_GMAC_STATCARRY1_ROVR 3 -#define S6_GMAC_STATCARRY1_RUND 4 -#define S6_GMAC_STATCARRY1_RCSE 5 -#define S6_GMAC_STATCARRY1_RCDE 6 -#define S6_GMAC_STATCARRY1_RFLR 7 -#define S6_GMAC_STATCARRY1_RALN 8 -#define S6_GMAC_STATCARRY1_RXUO 9 -#define S6_GMAC_STATCARRY1_RXPF 10 -#define S6_GMAC_STATCARRY1_RXCF 11 -#define S6_GMAC_STATCARRY1_RBCA 12 -#define S6_GMAC_STATCARRY1_RMCA 13 -#define S6_GMAC_STATCARRY1_RFCS 14 -#define S6_GMAC_STATCARRY1_RPKT 15 -#define S6_GMAC_STATCARRY1_RBYT 16 -#define S6_GMAC_STATCARRY1_TRMGV 25 -#define S6_GMAC_STATCARRY1_TRMAX 26 -#define S6_GMAC_STATCARRY1_TR1K 27 -#define S6_GMAC_STATCARRY1_TR511 28 -#define S6_GMAC_STATCARRY1_TR255 29 -#define S6_GMAC_STATCARRY1_TR127 30 -#define S6_GMAC_STATCARRY1_TR64 31 -#define S6_GMAC_STATCARRY2_TDRP 0 -#define S6_GMAC_STATCARRY2_TPFH 1 -#define S6_GMAC_STATCARRY2_TNCL 2 -#define S6_GMAC_STATCARRY2_TXCL 3 -#define S6_GMAC_STATCARRY2_TLCL 4 -#define S6_GMAC_STATCARRY2_TMCL 5 -#define S6_GMAC_STATCARRY2_TSCL 6 -#define S6_GMAC_STATCARRY2_TEDF 7 -#define S6_GMAC_STATCARRY2_TDFR 8 -#define S6_GMAC_STATCARRY2_TXPF 9 -#define S6_GMAC_STATCARRY2_TBCA 10 -#define S6_GMAC_STATCARRY2_TMCA 11 -#define S6_GMAC_STATCARRY2_TPKT 12 -#define S6_GMAC_STATCARRY2_TBYT 13 -#define S6_GMAC_STATCARRY2_TFRG 14 -#define S6_GMAC_STATCARRY2_TUND 15 -#define S6_GMAC_STATCARRY2_TOVR 16 -#define S6_GMAC_STATCARRY2_TXCF 17 -#define S6_GMAC_STATCARRY2_TFCS 18 -#define S6_GMAC_STATCARRY2_TJBR 19 - -#define S6_GMAC_HOST_PBLKCTRL 0x140 -#define S6_GMAC_HOST_PBLKCTRL_TXENA 0 -#define S6_GMAC_HOST_PBLKCTRL_RXENA 1 -#define S6_GMAC_HOST_PBLKCTRL_TXSRES 2 -#define S6_GMAC_HOST_PBLKCTRL_RXSRES 3 -#define S6_GMAC_HOST_PBLKCTRL_TXBSIZ 8 -#define S6_GMAC_HOST_PBLKCTRL_RXBSIZ 12 -#define S6_GMAC_HOST_PBLKCTRL_SIZ_16 4 -#define S6_GMAC_HOST_PBLKCTRL_SIZ_32 5 -#define S6_GMAC_HOST_PBLKCTRL_SIZ_64 6 -#define S6_GMAC_HOST_PBLKCTRL_SIZ_128 7 -#define S6_GMAC_HOST_PBLKCTRL_SIZ_MASK 0xF -#define S6_GMAC_HOST_PBLKCTRL_STATENA 16 -#define S6_GMAC_HOST_PBLKCTRL_STATAUTOZ 17 -#define S6_GMAC_HOST_PBLKCTRL_STATCLEAR 18 -#define S6_GMAC_HOST_PBLKCTRL_RGMII 19 -#define S6_GMAC_HOST_INTMASK 0x144 -#define S6_GMAC_HOST_INTSTAT 0x148 -#define S6_GMAC_HOST_INT_TXBURSTOVER 3 -#define S6_GMAC_HOST_INT_TXPREWOVER 4 -#define S6_GMAC_HOST_INT_RXBURSTUNDER 5 -#define S6_GMAC_HOST_INT_RXPOSTRFULL 6 -#define S6_GMAC_HOST_INT_RXPOSTRUNDER 7 -#define S6_GMAC_HOST_RXFIFOHWM 0x14C -#define S6_GMAC_HOST_CTRLFRAMXP 0x150 -#define S6_GMAC_HOST_DSTADDRLO(n) (0x160 + 8*(n)) -#define S6_GMAC_HOST_DSTADDRHI(n) (0x164 + 8*(n)) -#define S6_GMAC_HOST_DSTMASKLO(n) (0x180 + 8*(n)) -#define S6_GMAC_HOST_DSTMASKHI(n) (0x184 + 8*(n)) - -#define S6_GMAC_BURST_PREWR 0x1B0 -#define S6_GMAC_BURST_PREWR_LEN 0 -#define S6_GMAC_BURST_PREWR_LEN_MASK ((1 << 20) - 1) -#define S6_GMAC_BURST_PREWR_CFE 20 -#define S6_GMAC_BURST_PREWR_PPE 21 -#define S6_GMAC_BURST_PREWR_FCS 22 -#define S6_GMAC_BURST_PREWR_PAD 23 -#define S6_GMAC_BURST_POSTRD 0x1D0 -#define S6_GMAC_BURST_POSTRD_LEN 0 -#define S6_GMAC_BURST_POSTRD_LEN_MASK ((1 << 20) - 1) -#define S6_GMAC_BURST_POSTRD_DROP 20 - - -/* data handling */ - -#define S6_NUM_TX_SKB 8 /* must be larger than TX fifo size */ -#define S6_NUM_RX_SKB 16 -#define S6_MAX_FRLEN 1536 - -struct s6gmac { - u32 reg; - u32 tx_dma; - u32 rx_dma; - u32 io; - u8 tx_chan; - u8 rx_chan; - spinlock_t lock; - u8 tx_skb_i, tx_skb_o; - u8 rx_skb_i, rx_skb_o; - struct sk_buff *tx_skb[S6_NUM_TX_SKB]; - struct sk_buff *rx_skb[S6_NUM_RX_SKB]; - unsigned long carry[sizeof(struct net_device_stats) / sizeof(long)]; - unsigned long stats[sizeof(struct net_device_stats) / sizeof(long)]; - struct phy_device *phydev; - struct { - struct mii_bus *bus; - int irq[PHY_MAX_ADDR]; - } mii; - struct { - unsigned int mbit; - u8 giga; - u8 isup; - u8 full; - } link; -}; - -static void s6gmac_rx_fillfifo(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - struct sk_buff *skb; - while ((((u8)(pd->rx_skb_i - pd->rx_skb_o)) < S6_NUM_RX_SKB) && - (!s6dmac_fifo_full(pd->rx_dma, pd->rx_chan)) && - (skb = netdev_alloc_skb(dev, S6_MAX_FRLEN + 2))) { - pd->rx_skb[(pd->rx_skb_i++) % S6_NUM_RX_SKB] = skb; - s6dmac_put_fifo_cache(pd->rx_dma, pd->rx_chan, - pd->io, (u32)skb->data, S6_MAX_FRLEN); - } -} - -static void s6gmac_rx_interrupt(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - u32 pfx; - struct sk_buff *skb; - while (((u8)(pd->rx_skb_i - pd->rx_skb_o)) > - s6dmac_pending_count(pd->rx_dma, pd->rx_chan)) { - skb = pd->rx_skb[(pd->rx_skb_o++) % S6_NUM_RX_SKB]; - pfx = readl(pd->reg + S6_GMAC_BURST_POSTRD); - if (pfx & (1 << S6_GMAC_BURST_POSTRD_DROP)) { - dev_kfree_skb_irq(skb); - } else { - skb_put(skb, (pfx >> S6_GMAC_BURST_POSTRD_LEN) - & S6_GMAC_BURST_POSTRD_LEN_MASK); - skb->protocol = eth_type_trans(skb, dev); - skb->ip_summed = CHECKSUM_UNNECESSARY; - netif_rx(skb); - } - } -} - -static void s6gmac_tx_interrupt(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - while (((u8)(pd->tx_skb_i - pd->tx_skb_o)) > - s6dmac_pending_count(pd->tx_dma, pd->tx_chan)) { - dev_kfree_skb_irq(pd->tx_skb[(pd->tx_skb_o++) % S6_NUM_TX_SKB]); - } - if (!s6dmac_fifo_full(pd->tx_dma, pd->tx_chan)) - netif_wake_queue(dev); -} - -struct s6gmac_statinf { - unsigned reg_size : 4; /* 0: unused */ - unsigned reg_off : 6; - unsigned net_index : 6; -}; - -#define S6_STATS_B (8 * sizeof(u32)) -#define S6_STATS_C(b, r, f) [b] = { \ - BUILD_BUG_ON_ZERO(r##_SIZE < S6_GMAC_STAT_SIZE_MIN) + \ - BUILD_BUG_ON_ZERO((r##_SIZE - (S6_GMAC_STAT_SIZE_MIN - 1)) \ - >= (1<<4)) + \ - r##_SIZE - (S6_GMAC_STAT_SIZE_MIN - 1), \ - BUILD_BUG_ON_ZERO(((unsigned)((r - S6_GMAC_STAT_REGS) / sizeof(u32))) \ - >= ((1<<6)-1)) + \ - (r - S6_GMAC_STAT_REGS) / sizeof(u32), \ - BUILD_BUG_ON_ZERO((offsetof(struct net_device_stats, f)) \ - % sizeof(unsigned long)) + \ - BUILD_BUG_ON_ZERO((((unsigned)(offsetof(struct net_device_stats, f)) \ - / sizeof(unsigned long)) >= (1<<6))) + \ - BUILD_BUG_ON_ZERO((sizeof(((struct net_device_stats *)0)->f) \ - != sizeof(unsigned long))) + \ - (offsetof(struct net_device_stats, f)) / sizeof(unsigned long)}, - -static const struct s6gmac_statinf statinf[2][S6_STATS_B] = { { - S6_STATS_C(S6_GMAC_STATCARRY1_RBYT, S6_GMAC_STATRBYT, rx_bytes) - S6_STATS_C(S6_GMAC_STATCARRY1_RPKT, S6_GMAC_STATRPKT, rx_packets) - S6_STATS_C(S6_GMAC_STATCARRY1_RFCS, S6_GMAC_STATRFCS, rx_crc_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RMCA, S6_GMAC_STATRMCA, multicast) - S6_STATS_C(S6_GMAC_STATCARRY1_RALN, S6_GMAC_STATRALN, rx_frame_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RFLR, S6_GMAC_STATRFLR, rx_length_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RCDE, S6_GMAC_STATRCDE, rx_missed_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RUND, S6_GMAC_STATRUND, rx_length_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_ROVR, S6_GMAC_STATROVR, rx_length_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RFRG, S6_GMAC_STATRFRG, rx_crc_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RJBR, S6_GMAC_STATRJBR, rx_crc_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RDRP, S6_GMAC_STATRDRP, rx_dropped) -}, { - S6_STATS_C(S6_GMAC_STATCARRY2_TBYT, S6_GMAC_STATTBYT, tx_bytes) - S6_STATS_C(S6_GMAC_STATCARRY2_TPKT, S6_GMAC_STATTPKT, tx_packets) - S6_STATS_C(S6_GMAC_STATCARRY2_TEDF, S6_GMAC_STATTEDF, tx_aborted_errors) - S6_STATS_C(S6_GMAC_STATCARRY2_TXCL, S6_GMAC_STATTXCL, tx_aborted_errors) - S6_STATS_C(S6_GMAC_STATCARRY2_TNCL, S6_GMAC_STATTNCL, collisions) - S6_STATS_C(S6_GMAC_STATCARRY2_TDRP, S6_GMAC_STATTDRP, tx_dropped) - S6_STATS_C(S6_GMAC_STATCARRY2_TJBR, S6_GMAC_STATTJBR, tx_errors) - S6_STATS_C(S6_GMAC_STATCARRY2_TFCS, S6_GMAC_STATTFCS, tx_errors) - S6_STATS_C(S6_GMAC_STATCARRY2_TOVR, S6_GMAC_STATTOVR, tx_errors) - S6_STATS_C(S6_GMAC_STATCARRY2_TUND, S6_GMAC_STATTUND, tx_errors) - S6_STATS_C(S6_GMAC_STATCARRY2_TFRG, S6_GMAC_STATTFRG, tx_errors) -} }; - -static void s6gmac_stats_collect(struct s6gmac *pd, - const struct s6gmac_statinf *inf) -{ - int b; - for (b = 0; b < S6_STATS_B; b++) { - if (inf[b].reg_size) { - pd->stats[inf[b].net_index] += - readl(pd->reg + S6_GMAC_STAT_REGS - + sizeof(u32) * inf[b].reg_off); - } - } -} - -static void s6gmac_stats_carry(struct s6gmac *pd, - const struct s6gmac_statinf *inf, u32 mask) -{ - int b; - while (mask) { - b = fls(mask) - 1; - mask &= ~(1 << b); - pd->carry[inf[b].net_index] += (1 << inf[b].reg_size); - } -} - -static inline u32 s6gmac_stats_pending(struct s6gmac *pd, int carry) -{ - int r = readl(pd->reg + S6_GMAC_STATCARRY(carry)) & - ~readl(pd->reg + S6_GMAC_STATCARRYMSK(carry)); - return r; -} - -static inline void s6gmac_stats_interrupt(struct s6gmac *pd, int carry) -{ - u32 mask; - mask = s6gmac_stats_pending(pd, carry); - if (mask) { - writel(mask, pd->reg + S6_GMAC_STATCARRY(carry)); - s6gmac_stats_carry(pd, &statinf[carry][0], mask); - } -} - -static irqreturn_t s6gmac_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = (struct net_device *)dev_id; - struct s6gmac *pd = netdev_priv(dev); - if (!dev) - return IRQ_NONE; - spin_lock(&pd->lock); - if (s6dmac_termcnt_irq(pd->rx_dma, pd->rx_chan)) - s6gmac_rx_interrupt(dev); - s6gmac_rx_fillfifo(dev); - if (s6dmac_termcnt_irq(pd->tx_dma, pd->tx_chan)) - s6gmac_tx_interrupt(dev); - s6gmac_stats_interrupt(pd, 0); - s6gmac_stats_interrupt(pd, 1); - spin_unlock(&pd->lock); - return IRQ_HANDLED; -} - -static inline void s6gmac_set_dstaddr(struct s6gmac *pd, int n, - u32 addrlo, u32 addrhi, u32 masklo, u32 maskhi) -{ - writel(addrlo, pd->reg + S6_GMAC_HOST_DSTADDRLO(n)); - writel(addrhi, pd->reg + S6_GMAC_HOST_DSTADDRHI(n)); - writel(masklo, pd->reg + S6_GMAC_HOST_DSTMASKLO(n)); - writel(maskhi, pd->reg + S6_GMAC_HOST_DSTMASKHI(n)); -} - -static inline void s6gmac_stop_device(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - writel(0, pd->reg + S6_GMAC_MACCONF1); -} - -static inline void s6gmac_init_device(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - int is_rgmii = !!(pd->phydev->supported - & (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)); -#if 0 - writel(1 << S6_GMAC_MACCONF1_SYNCTX | - 1 << S6_GMAC_MACCONF1_SYNCRX | - 1 << S6_GMAC_MACCONF1_TXFLOWCTRL | - 1 << S6_GMAC_MACCONF1_RXFLOWCTRL | - 1 << S6_GMAC_MACCONF1_RESTXFUNC | - 1 << S6_GMAC_MACCONF1_RESRXFUNC | - 1 << S6_GMAC_MACCONF1_RESTXMACCTRL | - 1 << S6_GMAC_MACCONF1_RESRXMACCTRL, - pd->reg + S6_GMAC_MACCONF1); -#endif - writel(1 << S6_GMAC_MACCONF1_SOFTRES, pd->reg + S6_GMAC_MACCONF1); - udelay(1000); - writel(1 << S6_GMAC_MACCONF1_TXENA | 1 << S6_GMAC_MACCONF1_RXENA, - pd->reg + S6_GMAC_MACCONF1); - writel(1 << S6_GMAC_HOST_PBLKCTRL_TXSRES | - 1 << S6_GMAC_HOST_PBLKCTRL_RXSRES, - pd->reg + S6_GMAC_HOST_PBLKCTRL); - writel(S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_TXBSIZ | - S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_RXBSIZ | - 1 << S6_GMAC_HOST_PBLKCTRL_STATENA | - 1 << S6_GMAC_HOST_PBLKCTRL_STATCLEAR | - is_rgmii << S6_GMAC_HOST_PBLKCTRL_RGMII, - pd->reg + S6_GMAC_HOST_PBLKCTRL); - writel(1 << S6_GMAC_MACCONF1_TXENA | - 1 << S6_GMAC_MACCONF1_RXENA | - (dev->flags & IFF_LOOPBACK ? 1 : 0) - << S6_GMAC_MACCONF1_LOOPBACK, - pd->reg + S6_GMAC_MACCONF1); - writel(dev->mtu && (dev->mtu < (S6_MAX_FRLEN - ETH_HLEN-ETH_FCS_LEN)) ? - dev->mtu+ETH_HLEN+ETH_FCS_LEN : S6_MAX_FRLEN, - pd->reg + S6_GMAC_MACMAXFRAMELEN); - writel((pd->link.full ? 1 : 0) << S6_GMAC_MACCONF2_FULL | - 1 << S6_GMAC_MACCONF2_PADCRCENA | - 1 << S6_GMAC_MACCONF2_LENGTHFCHK | - (pd->link.giga ? - S6_GMAC_MACCONF2_IFMODE_BYTE : - S6_GMAC_MACCONF2_IFMODE_NIBBLE) - << S6_GMAC_MACCONF2_IFMODE | - 7 << S6_GMAC_MACCONF2_PREAMBLELEN, - pd->reg + S6_GMAC_MACCONF2); - writel(0, pd->reg + S6_GMAC_MACSTATADDR1); - writel(0, pd->reg + S6_GMAC_MACSTATADDR2); - writel(1 << S6_GMAC_FIFOCONF0_WTMENREQ | - 1 << S6_GMAC_FIFOCONF0_SRFENREQ | - 1 << S6_GMAC_FIFOCONF0_FRFENREQ | - 1 << S6_GMAC_FIFOCONF0_STFENREQ | - 1 << S6_GMAC_FIFOCONF0_FTFENREQ, - pd->reg + S6_GMAC_FIFOCONF0); - writel(128 << S6_GMAC_FIFOCONF3_CFGFTTH | - 128 << S6_GMAC_FIFOCONF3_CFGHWMFT, - pd->reg + S6_GMAC_FIFOCONF3); - writel((S6_GMAC_FIFOCONF_RSV_MASK & ~( - 1 << S6_GMAC_FIFOCONF_RSV_RUNT | - 1 << S6_GMAC_FIFOCONF_RSV_CRCERR | - 1 << S6_GMAC_FIFOCONF_RSV_OK | - 1 << S6_GMAC_FIFOCONF_RSV_DRIBBLE | - 1 << S6_GMAC_FIFOCONF_RSV_CTRLFRAME | - 1 << S6_GMAC_FIFOCONF_RSV_PAUSECTRL | - 1 << S6_GMAC_FIFOCONF_RSV_UNOPCODE | - 1 << S6_GMAC_FIFOCONF_RSV_TRUNCATED)) | - 1 << S6_GMAC_FIFOCONF5_DROPLT64 | - pd->link.giga << S6_GMAC_FIFOCONF5_CFGBYTM | - 1 << S6_GMAC_FIFOCONF5_RXDROPSIZE, - pd->reg + S6_GMAC_FIFOCONF5); - writel(1 << S6_GMAC_FIFOCONF_RSV_RUNT | - 1 << S6_GMAC_FIFOCONF_RSV_CRCERR | - 1 << S6_GMAC_FIFOCONF_RSV_DRIBBLE | - 1 << S6_GMAC_FIFOCONF_RSV_CTRLFRAME | - 1 << S6_GMAC_FIFOCONF_RSV_PAUSECTRL | - 1 << S6_GMAC_FIFOCONF_RSV_UNOPCODE | - 1 << S6_GMAC_FIFOCONF_RSV_TRUNCATED, - pd->reg + S6_GMAC_FIFOCONF4); - s6gmac_set_dstaddr(pd, 0, - 0xFFFFFFFF, 0x0000FFFF, 0xFFFFFFFF, 0x0000FFFF); - s6gmac_set_dstaddr(pd, 1, - dev->dev_addr[5] | - dev->dev_addr[4] << 8 | - dev->dev_addr[3] << 16 | - dev->dev_addr[2] << 24, - dev->dev_addr[1] | - dev->dev_addr[0] << 8, - 0xFFFFFFFF, 0x0000FFFF); - s6gmac_set_dstaddr(pd, 2, - 0x00000000, 0x00000100, 0x00000000, 0x00000100); - s6gmac_set_dstaddr(pd, 3, - 0x00000000, 0x00000000, 0x00000000, 0x00000000); - writel(1 << S6_GMAC_HOST_PBLKCTRL_TXENA | - 1 << S6_GMAC_HOST_PBLKCTRL_RXENA | - S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_TXBSIZ | - S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_RXBSIZ | - 1 << S6_GMAC_HOST_PBLKCTRL_STATENA | - 1 << S6_GMAC_HOST_PBLKCTRL_STATCLEAR | - is_rgmii << S6_GMAC_HOST_PBLKCTRL_RGMII, - pd->reg + S6_GMAC_HOST_PBLKCTRL); -} - -static void s6mii_enable(struct s6gmac *pd) -{ - writel(readl(pd->reg + S6_GMAC_MACCONF1) & - ~(1 << S6_GMAC_MACCONF1_SOFTRES), - pd->reg + S6_GMAC_MACCONF1); - writel((readl(pd->reg + S6_GMAC_MACMIICONF) - & ~(S6_GMAC_MACMIICONF_CSEL_MASK << S6_GMAC_MACMIICONF_CSEL)) - | (S6_GMAC_MACMIICONF_CSEL_DIV168 << S6_GMAC_MACMIICONF_CSEL), - pd->reg + S6_GMAC_MACMIICONF); -} - -static int s6mii_busy(struct s6gmac *pd, int tmo) -{ - while (readl(pd->reg + S6_GMAC_MACMIIINDI)) { - if (--tmo == 0) - return -ETIME; - udelay(64); - } - return 0; -} - -static int s6mii_read(struct mii_bus *bus, int phy_addr, int regnum) -{ - struct s6gmac *pd = bus->priv; - s6mii_enable(pd); - if (s6mii_busy(pd, 256)) - return -ETIME; - writel(phy_addr << S6_GMAC_MACMIIADDR_PHY | - regnum << S6_GMAC_MACMIIADDR_REG, - pd->reg + S6_GMAC_MACMIIADDR); - writel(1 << S6_GMAC_MACMIICMD_READ, pd->reg + S6_GMAC_MACMIICMD); - writel(0, pd->reg + S6_GMAC_MACMIICMD); - if (s6mii_busy(pd, 256)) - return -ETIME; - return (u16)readl(pd->reg + S6_GMAC_MACMIISTAT); -} - -static int s6mii_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value) -{ - struct s6gmac *pd = bus->priv; - s6mii_enable(pd); - if (s6mii_busy(pd, 256)) - return -ETIME; - writel(phy_addr << S6_GMAC_MACMIIADDR_PHY | - regnum << S6_GMAC_MACMIIADDR_REG, - pd->reg + S6_GMAC_MACMIIADDR); - writel(value, pd->reg + S6_GMAC_MACMIICTRL); - if (s6mii_busy(pd, 256)) - return -ETIME; - return 0; -} - -static int s6mii_reset(struct mii_bus *bus) -{ - struct s6gmac *pd = bus->priv; - s6mii_enable(pd); - if (s6mii_busy(pd, PHY_INIT_TIMEOUT)) - return -ETIME; - return 0; -} - -static void s6gmac_set_rgmii_txclock(struct s6gmac *pd) -{ - u32 pllsel = readl(S6_REG_GREG1 + S6_GREG1_PLLSEL); - pllsel &= ~(S6_GREG1_PLLSEL_GMAC_MASK << S6_GREG1_PLLSEL_GMAC); - switch (pd->link.mbit) { - case 10: - pllsel |= S6_GREG1_PLLSEL_GMAC_2500KHZ << S6_GREG1_PLLSEL_GMAC; - break; - case 100: - pllsel |= S6_GREG1_PLLSEL_GMAC_25MHZ << S6_GREG1_PLLSEL_GMAC; - break; - case 1000: - pllsel |= S6_GREG1_PLLSEL_GMAC_125MHZ << S6_GREG1_PLLSEL_GMAC; - break; - default: - return; - } - writel(pllsel, S6_REG_GREG1 + S6_GREG1_PLLSEL); -} - -static inline void s6gmac_linkisup(struct net_device *dev, int isup) -{ - struct s6gmac *pd = netdev_priv(dev); - struct phy_device *phydev = pd->phydev; - - pd->link.full = phydev->duplex; - pd->link.giga = (phydev->speed == 1000); - if (pd->link.mbit != phydev->speed) { - pd->link.mbit = phydev->speed; - s6gmac_set_rgmii_txclock(pd); - } - pd->link.isup = isup; - if (isup) - netif_carrier_on(dev); - phy_print_status(phydev); -} - -static void s6gmac_adjust_link(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - struct phy_device *phydev = pd->phydev; - if (pd->link.isup && - (!phydev->link || - (pd->link.mbit != phydev->speed) || - (pd->link.full != phydev->duplex))) { - pd->link.isup = 0; - netif_tx_disable(dev); - if (!phydev->link) { - netif_carrier_off(dev); - phy_print_status(phydev); - } - } - if (!pd->link.isup && phydev->link) { - if (pd->link.full != phydev->duplex) { - u32 maccfg = readl(pd->reg + S6_GMAC_MACCONF2); - if (phydev->duplex) - maccfg |= 1 << S6_GMAC_MACCONF2_FULL; - else - maccfg &= ~(1 << S6_GMAC_MACCONF2_FULL); - writel(maccfg, pd->reg + S6_GMAC_MACCONF2); - } - - if (pd->link.giga != (phydev->speed == 1000)) { - u32 fifocfg = readl(pd->reg + S6_GMAC_FIFOCONF5); - u32 maccfg = readl(pd->reg + S6_GMAC_MACCONF2); - maccfg &= ~(S6_GMAC_MACCONF2_IFMODE_MASK - << S6_GMAC_MACCONF2_IFMODE); - if (phydev->speed == 1000) { - fifocfg |= 1 << S6_GMAC_FIFOCONF5_CFGBYTM; - maccfg |= S6_GMAC_MACCONF2_IFMODE_BYTE - << S6_GMAC_MACCONF2_IFMODE; - } else { - fifocfg &= ~(1 << S6_GMAC_FIFOCONF5_CFGBYTM); - maccfg |= S6_GMAC_MACCONF2_IFMODE_NIBBLE - << S6_GMAC_MACCONF2_IFMODE; - } - writel(fifocfg, pd->reg + S6_GMAC_FIFOCONF5); - writel(maccfg, pd->reg + S6_GMAC_MACCONF2); - } - - if (!s6dmac_fifo_full(pd->tx_dma, pd->tx_chan)) - netif_wake_queue(dev); - s6gmac_linkisup(dev, 1); - } -} - -static inline int s6gmac_phy_start(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - int i = 0; - struct phy_device *p = NULL; - while ((i < PHY_MAX_ADDR) && (!(p = pd->mii.bus->phy_map[i]))) - i++; - p = phy_connect(dev, dev_name(&p->dev), &s6gmac_adjust_link, - PHY_INTERFACE_MODE_RGMII); - if (IS_ERR(p)) { - printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); - return PTR_ERR(p); - } - p->supported &= PHY_GBIT_FEATURES; - p->advertising = p->supported; - pd->phydev = p; - return 0; -} - -static inline void s6gmac_init_stats(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - u32 mask; - mask = 1 << S6_GMAC_STATCARRY1_RDRP | - 1 << S6_GMAC_STATCARRY1_RJBR | - 1 << S6_GMAC_STATCARRY1_RFRG | - 1 << S6_GMAC_STATCARRY1_ROVR | - 1 << S6_GMAC_STATCARRY1_RUND | - 1 << S6_GMAC_STATCARRY1_RCDE | - 1 << S6_GMAC_STATCARRY1_RFLR | - 1 << S6_GMAC_STATCARRY1_RALN | - 1 << S6_GMAC_STATCARRY1_RMCA | - 1 << S6_GMAC_STATCARRY1_RFCS | - 1 << S6_GMAC_STATCARRY1_RPKT | - 1 << S6_GMAC_STATCARRY1_RBYT; - writel(mask, pd->reg + S6_GMAC_STATCARRY(0)); - writel(~mask, pd->reg + S6_GMAC_STATCARRYMSK(0)); - mask = 1 << S6_GMAC_STATCARRY2_TDRP | - 1 << S6_GMAC_STATCARRY2_TNCL | - 1 << S6_GMAC_STATCARRY2_TXCL | - 1 << S6_GMAC_STATCARRY2_TEDF | - 1 << S6_GMAC_STATCARRY2_TPKT | - 1 << S6_GMAC_STATCARRY2_TBYT | - 1 << S6_GMAC_STATCARRY2_TFRG | - 1 << S6_GMAC_STATCARRY2_TUND | - 1 << S6_GMAC_STATCARRY2_TOVR | - 1 << S6_GMAC_STATCARRY2_TFCS | - 1 << S6_GMAC_STATCARRY2_TJBR; - writel(mask, pd->reg + S6_GMAC_STATCARRY(1)); - writel(~mask, pd->reg + S6_GMAC_STATCARRYMSK(1)); -} - -static inline void s6gmac_init_dmac(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - s6dmac_disable_chan(pd->tx_dma, pd->tx_chan); - s6dmac_disable_chan(pd->rx_dma, pd->rx_chan); - s6dmac_disable_error_irqs(pd->tx_dma, 1 << S6_HIFDMA_GMACTX); - s6dmac_disable_error_irqs(pd->rx_dma, 1 << S6_HIFDMA_GMACRX); -} - -static int s6gmac_tx(struct sk_buff *skb, struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - unsigned long flags; - - spin_lock_irqsave(&pd->lock, flags); - writel(skb->len << S6_GMAC_BURST_PREWR_LEN | - 0 << S6_GMAC_BURST_PREWR_CFE | - 1 << S6_GMAC_BURST_PREWR_PPE | - 1 << S6_GMAC_BURST_PREWR_FCS | - ((skb->len < ETH_ZLEN) ? 1 : 0) << S6_GMAC_BURST_PREWR_PAD, - pd->reg + S6_GMAC_BURST_PREWR); - s6dmac_put_fifo_cache(pd->tx_dma, pd->tx_chan, - (u32)skb->data, pd->io, skb->len); - if (s6dmac_fifo_full(pd->tx_dma, pd->tx_chan)) - netif_stop_queue(dev); - if (((u8)(pd->tx_skb_i - pd->tx_skb_o)) >= S6_NUM_TX_SKB) { - printk(KERN_ERR "GMAC BUG: skb tx ring overflow [%x, %x]\n", - pd->tx_skb_o, pd->tx_skb_i); - BUG(); - } - pd->tx_skb[(pd->tx_skb_i++) % S6_NUM_TX_SKB] = skb; - spin_unlock_irqrestore(&pd->lock, flags); - return 0; -} - -static void s6gmac_tx_timeout(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - unsigned long flags; - spin_lock_irqsave(&pd->lock, flags); - s6gmac_tx_interrupt(dev); - spin_unlock_irqrestore(&pd->lock, flags); -} - -static int s6gmac_open(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - unsigned long flags; - phy_read_status(pd->phydev); - spin_lock_irqsave(&pd->lock, flags); - pd->link.mbit = 0; - s6gmac_linkisup(dev, pd->phydev->link); - s6gmac_init_device(dev); - s6gmac_init_stats(dev); - s6gmac_init_dmac(dev); - s6gmac_rx_fillfifo(dev); - s6dmac_enable_chan(pd->rx_dma, pd->rx_chan, - 2, 1, 0, 1, 0, 0, 0, 7, -1, 2, 0, 1); - s6dmac_enable_chan(pd->tx_dma, pd->tx_chan, - 2, 0, 1, 0, 0, 0, 0, 7, -1, 2, 0, 1); - writel(0 << S6_GMAC_HOST_INT_TXBURSTOVER | - 0 << S6_GMAC_HOST_INT_TXPREWOVER | - 0 << S6_GMAC_HOST_INT_RXBURSTUNDER | - 0 << S6_GMAC_HOST_INT_RXPOSTRFULL | - 0 << S6_GMAC_HOST_INT_RXPOSTRUNDER, - pd->reg + S6_GMAC_HOST_INTMASK); - spin_unlock_irqrestore(&pd->lock, flags); - phy_start(pd->phydev); - netif_start_queue(dev); - return 0; -} - -static int s6gmac_stop(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - unsigned long flags; - netif_stop_queue(dev); - phy_stop(pd->phydev); - spin_lock_irqsave(&pd->lock, flags); - s6gmac_init_dmac(dev); - s6gmac_stop_device(dev); - while (pd->tx_skb_i != pd->tx_skb_o) - dev_kfree_skb(pd->tx_skb[(pd->tx_skb_o++) % S6_NUM_TX_SKB]); - while (pd->rx_skb_i != pd->rx_skb_o) - dev_kfree_skb(pd->rx_skb[(pd->rx_skb_o++) % S6_NUM_RX_SKB]); - spin_unlock_irqrestore(&pd->lock, flags); - return 0; -} - -static struct net_device_stats *s6gmac_stats(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - struct net_device_stats *st = (struct net_device_stats *)&pd->stats; - int i; - do { - unsigned long flags; - spin_lock_irqsave(&pd->lock, flags); - for (i = 0; i < ARRAY_SIZE(pd->stats); i++) - pd->stats[i] = - pd->carry[i] << (S6_GMAC_STAT_SIZE_MIN - 1); - s6gmac_stats_collect(pd, &statinf[0][0]); - s6gmac_stats_collect(pd, &statinf[1][0]); - i = s6gmac_stats_pending(pd, 0) | - s6gmac_stats_pending(pd, 1); - spin_unlock_irqrestore(&pd->lock, flags); - } while (i); - st->rx_errors = st->rx_crc_errors + - st->rx_frame_errors + - st->rx_length_errors + - st->rx_missed_errors; - st->tx_errors += st->tx_aborted_errors; - return st; -} - -static int s6gmac_probe(struct platform_device *pdev) -{ - struct net_device *dev; - struct s6gmac *pd; - int res; - unsigned long i; - struct mii_bus *mb; - - dev = alloc_etherdev(sizeof(*pd)); - if (!dev) - return -ENOMEM; - - dev->open = s6gmac_open; - dev->stop = s6gmac_stop; - dev->hard_start_xmit = s6gmac_tx; - dev->tx_timeout = s6gmac_tx_timeout; - dev->watchdog_timeo = HZ; - dev->get_stats = s6gmac_stats; - dev->irq = platform_get_irq(pdev, 0); - pd = netdev_priv(dev); - memset(pd, 0, sizeof(*pd)); - spin_lock_init(&pd->lock); - pd->reg = platform_get_resource(pdev, IORESOURCE_MEM, 0)->start; - i = platform_get_resource(pdev, IORESOURCE_DMA, 0)->start; - pd->tx_dma = DMA_MASK_DMAC(i); - pd->tx_chan = DMA_INDEX_CHNL(i); - i = platform_get_resource(pdev, IORESOURCE_DMA, 1)->start; - pd->rx_dma = DMA_MASK_DMAC(i); - pd->rx_chan = DMA_INDEX_CHNL(i); - pd->io = platform_get_resource(pdev, IORESOURCE_IO, 0)->start; - res = request_irq(dev->irq, s6gmac_interrupt, 0, dev->name, dev); - if (res) { - printk(KERN_ERR DRV_PRMT "irq request failed: %d\n", dev->irq); - goto errirq; - } - res = register_netdev(dev); - if (res) { - printk(KERN_ERR DRV_PRMT "error registering device %s\n", - dev->name); - goto errdev; - } - mb = mdiobus_alloc(); - if (!mb) { - printk(KERN_ERR DRV_PRMT "error allocating mii bus\n"); - res = -ENOMEM; - goto errmii; - } - mb->name = "s6gmac_mii"; - mb->read = s6mii_read; - mb->write = s6mii_write; - mb->reset = s6mii_reset; - mb->priv = pd; - snprintf(mb->id, MII_BUS_ID_SIZE, "%s-%x", pdev->name, pdev->id); - mb->phy_mask = ~(1 << 0); - mb->irq = &pd->mii.irq[0]; - for (i = 0; i < PHY_MAX_ADDR; i++) { - int n = platform_get_irq(pdev, i + 1); - if (n < 0) - n = PHY_POLL; - pd->mii.irq[i] = n; - } - mdiobus_register(mb); - pd->mii.bus = mb; - res = s6gmac_phy_start(dev); - if (res) - return res; - platform_set_drvdata(pdev, dev); - return 0; -errmii: - unregister_netdev(dev); -errdev: - free_irq(dev->irq, dev); -errirq: - free_netdev(dev); - return res; -} - -static int s6gmac_remove(struct platform_device *pdev) -{ - struct net_device *dev = platform_get_drvdata(pdev); - if (dev) { - struct s6gmac *pd = netdev_priv(dev); - mdiobus_unregister(pd->mii.bus); - unregister_netdev(dev); - free_irq(dev->irq, dev); - free_netdev(dev); - } - return 0; -} - -static struct platform_driver s6gmac_driver = { - .probe = s6gmac_probe, - .remove = s6gmac_remove, - .driver = { - .name = "s6gmac", - }, -}; - -module_platform_driver(s6gmac_driver); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("S6105 on chip Ethernet driver"); -MODULE_AUTHOR("Oskar Schirmer "); -- cgit v1.2.1 From f620e4fe161f4d488414d7893a690e76b53f0c5e Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 Dec 2014 22:14:31 +0100 Subject: net: ethernet: stmicro: stmmac: drop owner assignment from platform_drivers This platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 4032b170fe24..3039de2465ba 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -430,7 +430,6 @@ static struct platform_driver stmmac_pltfr_driver = { .remove = stmmac_pltfr_remove, .driver = { .name = STMMAC_RESOURCE_NAME, - .owner = THIS_MODULE, .pm = &stmmac_pltfr_pm_ops, .of_match_table = of_match_ptr(stmmac_dt_ids), }, -- cgit v1.2.1 From 6402a577f4688053e98c1ffda1f4a6a59684ba81 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Mon, 22 Dec 2014 08:28:52 +0800 Subject: 8139too: Fix the lack of pci_disable_device For linux-3.18.0 When pci_request_regions is failed in rtl8139_init_board, pci_disable_device is not called to disable the device which are enabled by pci_enable_device, because of disable_dev_on_err is not assigned 1. This patch fix this problem. Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139too.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c index 6d0b9dfac313..d4b0a29c6aa7 100644 --- a/drivers/net/ethernet/realtek/8139too.c +++ b/drivers/net/ethernet/realtek/8139too.c @@ -787,10 +787,10 @@ static struct net_device *rtl8139_init_board(struct pci_dev *pdev) if (rc) goto err_out; + disable_dev_on_err = 1; rc = pci_request_regions (pdev, DRV_NAME); if (rc) goto err_out; - disable_dev_on_err = 1; pci_set_master (pdev); -- cgit v1.2.1 From ea3c9e13afe739f1ff31130cea57084cfe8c5dcd Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Mon, 22 Dec 2014 08:43:14 +0800 Subject: 8139too: Add netif_napi_del in the driver For linux-3.18.0 The driver lacks netif_napi_del in the normal path and error path to match the call of netif_napi_add in rtl8139_init_one. This patch fixes this problem. Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139too.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c index d4b0a29c6aa7..78bb4ceb1cdd 100644 --- a/drivers/net/ethernet/realtek/8139too.c +++ b/drivers/net/ethernet/realtek/8139too.c @@ -1110,6 +1110,7 @@ static int rtl8139_init_one(struct pci_dev *pdev, return 0; err_out: + netif_napi_del(&tp->napi); __rtl8139_cleanup_dev (dev); pci_disable_device (pdev); return i; @@ -1124,6 +1125,7 @@ static void rtl8139_remove_one(struct pci_dev *pdev) assert (dev != NULL); cancel_delayed_work_sync(&tp->thread); + netif_napi_del(&tp->napi); unregister_netdev (dev); -- cgit v1.2.1 From 492f5add4be84652bbe13da8a250d60c6856a5c5 Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Mon, 22 Dec 2014 10:21:57 +0200 Subject: net/mlx4_en: Doorbell is byteswapped in Little Endian archs iowrite32() will byteswap it's argument on big endian archs. iowrite32be() will byteswap on little endian archs. Since we don't want to do this unnecessary byteswap on the fast path, doorbell is stored in the NIC's native endianness. Using the right iowrite() according to the arch endianness. CC: Wei Yang CC: David Laight Fixes: 6a4e812 ("net/mlx4_en: Avoid calling bswap in tx fast path") Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index a308d41e4de0..e3357bf523df 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -962,7 +962,17 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) tx_desc->ctrl.owner_opcode = op_own; if (send_doorbell) { wmb(); - iowrite32(ring->doorbell_qpn, + /* Since there is no iowrite*_native() that writes the + * value as is, without byteswapping - using the one + * the doesn't do byteswapping in the relevant arch + * endianness. + */ +#if defined(__LITTLE_ENDIAN) + iowrite32( +#else + iowrite32be( +#endif + ring->doorbell_qpn, ring->bf.uar->map + MLX4_SEND_DOORBELL); } else { ring->xmit_more++; -- cgit v1.2.1 From 3079c652141f9d6377417a7e8fd650c9948df65e Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 22 Dec 2014 20:35:25 +1100 Subject: caif: Fix napi poll list corruption The commit d75b1ade567ffab085e8adbbdacf0092d10cd09c (net: less interrupt masking in NAPI) breaks caif. It is now required that if the entire budget is consumed when poll returns, the napi poll_list must remain empty. However, like some other drivers caif tries to do a last-ditch check and if there is more work it will call napi_schedule and then immediately process some of this new work. Should the entire budget be consumed while processing such new work then we will violate the new caller contract. This patch fixes this by not touching any work when we reschedule in caif. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/caif/caif_virtio.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/caif/caif_virtio.c b/drivers/net/caif/caif_virtio.c index a5fefb9059c5..b306210b02b7 100644 --- a/drivers/net/caif/caif_virtio.c +++ b/drivers/net/caif/caif_virtio.c @@ -257,7 +257,6 @@ static int cfv_rx_poll(struct napi_struct *napi, int quota) struct vringh_kiov *riov = &cfv->ctx.riov; unsigned int skb_len; -again: do { skb = NULL; @@ -322,7 +321,6 @@ exit: napi_schedule_prep(napi)) { vringh_notify_disable_kern(cfv->vr_rx); __napi_schedule(napi); - goto again; } break; -- cgit v1.2.1 From 5ad24def21b205a8e91925cd276b0a794b5ace82 Mon Sep 17 00:00:00 2001 From: Hariprasad Shenai Date: Mon, 22 Dec 2014 15:14:37 +0530 Subject: cxgb4vf: Fix ethtool get_settings for VF driver Decode and display Port Type and Module Type for ethtool get_settings() call Signed-off-by: Hariprasad Shenai Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4vf/adapter.h | 4 + .../net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 142 ++++++++++++++++++--- drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h | 2 +- drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c | 54 ++++---- 4 files changed, 161 insertions(+), 41 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h b/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h index d00a751f0588..6049f70e110c 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h +++ b/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h @@ -96,6 +96,9 @@ struct port_info { s16 xact_addr_filt; /* index of our MAC address filter */ u16 rss_size; /* size of VI's RSS table slice */ u8 pidx; /* index into adapter port[] */ + s8 mdio_addr; + u8 port_type; /* firmware port type */ + u8 mod_type; /* firmware module type */ u8 port_id; /* physical port ID */ u8 nqsets; /* # of "Queue Sets" */ u8 first_qset; /* index of first "Queue Set" */ @@ -522,6 +525,7 @@ static inline struct adapter *netdev2adap(const struct net_device *dev) * is "contracted" to provide for the common code. */ void t4vf_os_link_changed(struct adapter *, int, int); +void t4vf_os_portmod_changed(struct adapter *, int); /* * SGE function prototype declarations. diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c index aa74ec34a467..2215d432a059 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c @@ -44,6 +44,7 @@ #include #include #include +#include #include "t4vf_common.h" #include "t4vf_defs.h" @@ -209,6 +210,38 @@ void t4vf_os_link_changed(struct adapter *adapter, int pidx, int link_ok) } } +/* + * THe port module type has changed on the indicated "port" (Virtual + * Interface). + */ +void t4vf_os_portmod_changed(struct adapter *adapter, int pidx) +{ + static const char * const mod_str[] = { + NULL, "LR", "SR", "ER", "passive DA", "active DA", "LRM" + }; + const struct net_device *dev = adapter->port[pidx]; + const struct port_info *pi = netdev_priv(dev); + + if (pi->mod_type == FW_PORT_MOD_TYPE_NONE) + dev_info(adapter->pdev_dev, "%s: port module unplugged\n", + dev->name); + else if (pi->mod_type < ARRAY_SIZE(mod_str)) + dev_info(adapter->pdev_dev, "%s: %s port module inserted\n", + dev->name, mod_str[pi->mod_type]); + else if (pi->mod_type == FW_PORT_MOD_TYPE_NOTSUPPORTED) + dev_info(adapter->pdev_dev, "%s: unsupported optical port " + "module inserted\n", dev->name); + else if (pi->mod_type == FW_PORT_MOD_TYPE_UNKNOWN) + dev_info(adapter->pdev_dev, "%s: unknown port module inserted," + "forcing TWINAX\n", dev->name); + else if (pi->mod_type == FW_PORT_MOD_TYPE_ERROR) + dev_info(adapter->pdev_dev, "%s: transceiver module error\n", + dev->name); + else + dev_info(adapter->pdev_dev, "%s: unknown module type %d " + "inserted\n", dev->name, pi->mod_type); +} + /* * Net device operations. * ====================== @@ -1193,24 +1226,103 @@ static void cxgb4vf_poll_controller(struct net_device *dev) * state of the port to which we're linked. */ -/* - * Return current port link settings. - */ -static int cxgb4vf_get_settings(struct net_device *dev, - struct ethtool_cmd *cmd) -{ - const struct port_info *pi = netdev_priv(dev); +static unsigned int t4vf_from_fw_linkcaps(enum fw_port_type type, + unsigned int caps) +{ + unsigned int v = 0; + + if (type == FW_PORT_TYPE_BT_SGMII || type == FW_PORT_TYPE_BT_XFI || + type == FW_PORT_TYPE_BT_XAUI) { + v |= SUPPORTED_TP; + if (caps & FW_PORT_CAP_SPEED_100M) + v |= SUPPORTED_100baseT_Full; + if (caps & FW_PORT_CAP_SPEED_1G) + v |= SUPPORTED_1000baseT_Full; + if (caps & FW_PORT_CAP_SPEED_10G) + v |= SUPPORTED_10000baseT_Full; + } else if (type == FW_PORT_TYPE_KX4 || type == FW_PORT_TYPE_KX) { + v |= SUPPORTED_Backplane; + if (caps & FW_PORT_CAP_SPEED_1G) + v |= SUPPORTED_1000baseKX_Full; + if (caps & FW_PORT_CAP_SPEED_10G) + v |= SUPPORTED_10000baseKX4_Full; + } else if (type == FW_PORT_TYPE_KR) + v |= SUPPORTED_Backplane | SUPPORTED_10000baseKR_Full; + else if (type == FW_PORT_TYPE_BP_AP) + v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC | + SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full; + else if (type == FW_PORT_TYPE_BP4_AP) + v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC | + SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full | + SUPPORTED_10000baseKX4_Full; + else if (type == FW_PORT_TYPE_FIBER_XFI || + type == FW_PORT_TYPE_FIBER_XAUI || + type == FW_PORT_TYPE_SFP || + type == FW_PORT_TYPE_QSFP_10G || + type == FW_PORT_TYPE_QSA) { + v |= SUPPORTED_FIBRE; + if (caps & FW_PORT_CAP_SPEED_1G) + v |= SUPPORTED_1000baseT_Full; + if (caps & FW_PORT_CAP_SPEED_10G) + v |= SUPPORTED_10000baseT_Full; + } else if (type == FW_PORT_TYPE_BP40_BA || + type == FW_PORT_TYPE_QSFP) { + v |= SUPPORTED_40000baseSR4_Full; + v |= SUPPORTED_FIBRE; + } + + if (caps & FW_PORT_CAP_ANEG) + v |= SUPPORTED_Autoneg; + return v; +} + +static int cxgb4vf_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + const struct port_info *p = netdev_priv(dev); + + if (p->port_type == FW_PORT_TYPE_BT_SGMII || + p->port_type == FW_PORT_TYPE_BT_XFI || + p->port_type == FW_PORT_TYPE_BT_XAUI) + cmd->port = PORT_TP; + else if (p->port_type == FW_PORT_TYPE_FIBER_XFI || + p->port_type == FW_PORT_TYPE_FIBER_XAUI) + cmd->port = PORT_FIBRE; + else if (p->port_type == FW_PORT_TYPE_SFP || + p->port_type == FW_PORT_TYPE_QSFP_10G || + p->port_type == FW_PORT_TYPE_QSA || + p->port_type == FW_PORT_TYPE_QSFP) { + if (p->mod_type == FW_PORT_MOD_TYPE_LR || + p->mod_type == FW_PORT_MOD_TYPE_SR || + p->mod_type == FW_PORT_MOD_TYPE_ER || + p->mod_type == FW_PORT_MOD_TYPE_LRM) + cmd->port = PORT_FIBRE; + else if (p->mod_type == FW_PORT_MOD_TYPE_TWINAX_PASSIVE || + p->mod_type == FW_PORT_MOD_TYPE_TWINAX_ACTIVE) + cmd->port = PORT_DA; + else + cmd->port = PORT_OTHER; + } else + cmd->port = PORT_OTHER; - cmd->supported = pi->link_cfg.supported; - cmd->advertising = pi->link_cfg.advertising; + if (p->mdio_addr >= 0) { + cmd->phy_address = p->mdio_addr; + cmd->transceiver = XCVR_EXTERNAL; + cmd->mdio_support = p->port_type == FW_PORT_TYPE_BT_SGMII ? + MDIO_SUPPORTS_C22 : MDIO_SUPPORTS_C45; + } else { + cmd->phy_address = 0; /* not really, but no better option */ + cmd->transceiver = XCVR_INTERNAL; + cmd->mdio_support = 0; + } + + cmd->supported = t4vf_from_fw_linkcaps(p->port_type, + p->link_cfg.supported); + cmd->advertising = t4vf_from_fw_linkcaps(p->port_type, + p->link_cfg.advertising); ethtool_cmd_speed_set(cmd, - netif_carrier_ok(dev) ? pi->link_cfg.speed : -1); + netif_carrier_ok(dev) ? p->link_cfg.speed : 0); cmd->duplex = DUPLEX_FULL; - - cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; - cmd->phy_address = pi->port_id; - cmd->transceiver = XCVR_EXTERNAL; - cmd->autoneg = pi->link_cfg.autoneg; + cmd->autoneg = p->link_cfg.autoneg; cmd->maxtxpkt = 0; cmd->maxrxpkt = 0; return 0; diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h index 8d3237f5e364..b9debb4f29a3 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h @@ -230,7 +230,7 @@ struct adapter_params { static inline bool is_10g_port(const struct link_config *lc) { - return (lc->supported & SUPPORTED_10000baseT_Full) != 0; + return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0; } static inline bool is_x_10g_port(const struct link_config *lc) diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c index 02e8833b7797..21dc9a20308c 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c @@ -245,6 +245,10 @@ static int hash_mac_addr(const u8 *addr) return a & 0x3f; } +#define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\ + FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G | \ + FW_PORT_CAP_SPEED_100G | FW_PORT_CAP_ANEG) + /** * init_link_config - initialize a link's SW state * @lc: structure holding the link state @@ -259,8 +263,8 @@ static void init_link_config(struct link_config *lc, unsigned int caps) lc->requested_speed = 0; lc->speed = 0; lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX; - if (lc->supported & SUPPORTED_Autoneg) { - lc->advertising = lc->supported; + if (lc->supported & FW_PORT_CAP_ANEG) { + lc->advertising = lc->supported & ADVERT_MASK; lc->autoneg = AUTONEG_ENABLE; lc->requested_fc |= PAUSE_AUTONEG; } else { @@ -280,7 +284,6 @@ int t4vf_port_init(struct adapter *adapter, int pidx) struct fw_vi_cmd vi_cmd, vi_rpl; struct fw_port_cmd port_cmd, port_rpl; int v; - u32 word; /* * Execute a VI Read command to get our Virtual Interface information @@ -319,19 +322,11 @@ int t4vf_port_init(struct adapter *adapter, int pidx) if (v) return v; - v = 0; - word = be16_to_cpu(port_rpl.u.info.pcap); - if (word & FW_PORT_CAP_SPEED_100M) - v |= SUPPORTED_100baseT_Full; - if (word & FW_PORT_CAP_SPEED_1G) - v |= SUPPORTED_1000baseT_Full; - if (word & FW_PORT_CAP_SPEED_10G) - v |= SUPPORTED_10000baseT_Full; - if (word & FW_PORT_CAP_SPEED_40G) - v |= SUPPORTED_40000baseSR4_Full; - if (word & FW_PORT_CAP_ANEG) - v |= SUPPORTED_Autoneg; - init_link_config(&pi->link_cfg, v); + v = be32_to_cpu(port_rpl.u.info.lstatus_to_modtype); + pi->port_type = FW_PORT_CMD_PTYPE_G(v); + pi->mod_type = FW_PORT_MOD_TYPE_NA; + + init_link_config(&pi->link_cfg, be16_to_cpu(port_rpl.u.info.pcap)); return 0; } @@ -1491,7 +1486,7 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl) */ const struct fw_port_cmd *port_cmd = (const struct fw_port_cmd *)rpl; - u32 word; + u32 stat, mod; int action, port_id, link_ok, speed, fc, pidx; /* @@ -1509,21 +1504,21 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl) port_id = FW_PORT_CMD_PORTID_G( be32_to_cpu(port_cmd->op_to_portid)); - word = be32_to_cpu(port_cmd->u.info.lstatus_to_modtype); - link_ok = (word & FW_PORT_CMD_LSTATUS_F) != 0; + stat = be32_to_cpu(port_cmd->u.info.lstatus_to_modtype); + link_ok = (stat & FW_PORT_CMD_LSTATUS_F) != 0; speed = 0; fc = 0; - if (word & FW_PORT_CMD_RXPAUSE_F) + if (stat & FW_PORT_CMD_RXPAUSE_F) fc |= PAUSE_RX; - if (word & FW_PORT_CMD_TXPAUSE_F) + if (stat & FW_PORT_CMD_TXPAUSE_F) fc |= PAUSE_TX; - if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M)) + if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M)) speed = 100; - else if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G)) + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G)) speed = 1000; - else if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G)) + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G)) speed = 10000; - else if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G)) + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G)) speed = 40000; /* @@ -1540,12 +1535,21 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl) continue; lc = &pi->link_cfg; + + mod = FW_PORT_CMD_MODTYPE_G(stat); + if (mod != pi->mod_type) { + pi->mod_type = mod; + t4vf_os_portmod_changed(adapter, pidx); + } + if (link_ok != lc->link_ok || speed != lc->speed || fc != lc->fc) { /* something changed */ lc->link_ok = link_ok; lc->speed = speed; lc->fc = fc; + lc->supported = + be16_to_cpu(port_cmd->u.info.pcap); t4vf_os_link_changed(adapter, pidx, link_ok); } } -- cgit v1.2.1 From 74f47278cb056ffe1d261df3e094d608c3569829 Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Tue, 23 Dec 2014 16:20:36 -0800 Subject: vxlan: Fix double free of skb. In case of error vxlan_xmit_one() can free already freed skb. Also fixes memory leak of dst-entry. Fixes: acbf74a7630 ("vxlan: Refactor vxlan driver to make use of the common UDP tunnel functions"). Signed-off-by: Pravin B Shelar Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 34 ++++++++++++++++++++++++---------- 1 file changed, 24 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 49d9f2291998..7fbd89fbe107 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1579,8 +1579,10 @@ static int vxlan6_xmit_skb(struct vxlan_sock *vs, bool udp_sum = !udp_get_no_check6_tx(vs->sock->sk); skb = udp_tunnel_handle_offloads(skb, udp_sum); - if (IS_ERR(skb)) - return -EINVAL; + if (IS_ERR(skb)) { + err = -EINVAL; + goto err; + } skb_scrub_packet(skb, xnet); @@ -1590,12 +1592,16 @@ static int vxlan6_xmit_skb(struct vxlan_sock *vs, /* Need space for new headers (invalidates iph ptr) */ err = skb_cow_head(skb, min_headroom); - if (unlikely(err)) - return err; + if (unlikely(err)) { + kfree_skb(skb); + goto err; + } skb = vlan_hwaccel_push_inside(skb); - if (WARN_ON(!skb)) - return -ENOMEM; + if (WARN_ON(!skb)) { + err = -ENOMEM; + goto err; + } vxh = (struct vxlanhdr *) __skb_push(skb, sizeof(*vxh)); vxh->vx_flags = htonl(VXLAN_FLAGS); @@ -1606,6 +1612,9 @@ static int vxlan6_xmit_skb(struct vxlan_sock *vs, udp_tunnel6_xmit_skb(vs->sock, dst, skb, dev, saddr, daddr, prio, ttl, src_port, dst_port); return 0; +err: + dst_release(dst); + return err; } #endif @@ -1621,7 +1630,7 @@ int vxlan_xmit_skb(struct vxlan_sock *vs, skb = udp_tunnel_handle_offloads(skb, udp_sum); if (IS_ERR(skb)) - return -EINVAL; + return PTR_ERR(skb); min_headroom = LL_RESERVED_SPACE(rt->dst.dev) + rt->dst.header_len + VXLAN_HLEN + sizeof(struct iphdr) @@ -1629,8 +1638,10 @@ int vxlan_xmit_skb(struct vxlan_sock *vs, /* Need space for new headers (invalidates iph ptr) */ err = skb_cow_head(skb, min_headroom); - if (unlikely(err)) + if (unlikely(err)) { + kfree_skb(skb); return err; + } skb = vlan_hwaccel_push_inside(skb); if (WARN_ON(!skb)) @@ -1776,9 +1787,12 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, tos, ttl, df, src_port, dst_port, htonl(vni << 8), !net_eq(vxlan->net, dev_net(vxlan->dev))); - - if (err < 0) + if (err < 0) { + /* skb is already freed. */ + skb = NULL; goto rt_tx_error; + } + iptunnel_xmit_stats(err, &dev->stats, dev->tstats); #if IS_ENABLED(CONFIG_IPV6) } else { -- cgit v1.2.1 From dddd60220f41775e634258efd1b54c6fa81ce706 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 22 Dec 2014 19:10:17 +0100 Subject: ipw2200: select CFG80211_WEXT Commit 24a0aa212ee2 ("cfg80211: make WEXT compatibility unselectable") made it impossible to depend on CFG80211_WEXT. It does still allow to select that symbol. (Yes, the commit summary is confusing.) So make IPW2200 select CFG80211_WEXT, so that the ipw2200 driver can be enabled in config again. Signed-off-by: Paul Bolle Signed-off-by: Kalle Valo --- drivers/net/wireless/ipw2x00/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ipw2x00/Kconfig b/drivers/net/wireless/ipw2x00/Kconfig index 91c0cb3c368e..21de4fe6cf2d 100644 --- a/drivers/net/wireless/ipw2x00/Kconfig +++ b/drivers/net/wireless/ipw2x00/Kconfig @@ -65,7 +65,8 @@ config IPW2100_DEBUG config IPW2200 tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection" - depends on PCI && CFG80211 && CFG80211_WEXT + depends on PCI && CFG80211 + select CFG80211_WEXT select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV -- cgit v1.2.1 From 8975842bed0840f314281c9fbf021a1d29537cf0 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 23 Dec 2014 16:48:32 +0200 Subject: brcmfmac: Do not crash if platform data is not populated The driver looks for pdata->oob_irq_supported to find out if wowl can be supported. However, not all platforms populate pdata in which case we crash the kernel because of NULL pointer dereference. Fixes: 330b4e4be937 ("brcmfmac: Add wowl support for SDIO devices.") Reported-by: Christophe Prigent Signed-off-by: Mika Westerberg Signed-off-by: Kalle Valo --- drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index 3c06e9365949..9880dae2a569 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -1070,7 +1070,7 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func, */ if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) && ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) || - (sdiodev->pdata->oob_irq_supported))) + (sdiodev->pdata && sdiodev->pdata->oob_irq_supported))) bus_if->wowl_supported = true; #endif @@ -1167,7 +1167,7 @@ static int brcmf_ops_sdio_resume(struct device *dev) struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; brcmf_dbg(SDIO, "Enter\n"); - if (sdiodev->pdata->oob_irq_supported) + if (sdiodev->pdata && sdiodev->pdata->oob_irq_supported) disable_irq_wake(sdiodev->pdata->oob_irq_nr); brcmf_sdio_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS); atomic_set(&sdiodev->suspend, false); -- cgit v1.2.1 From d0e1df9cf4a98fac8508f1d73d0f3a147d6c2c85 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 23 Dec 2014 12:59:17 +0100 Subject: net: phy: micrel: use generic config_init for KSZ8021/KSZ8031 Use generic config_init callback also for KSZ8021 and KSZ8031. This has been avoided this far due to commit b838b4aced99 ("phy/micrel: KSZ8031RNL RMII clock reconfiguration bug"), which claims that the PHY becomes unresponsive if the broadcast-disable flag is set before configuring the clock mode. Turns out that the problem seemingly worked-around by the above mentioned commit was really due to a hardware-configuration issue, where the PHY was in fact strapped to address 3 rather than 0. Tested-by: Bruno Thomsen Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 18 +++--------------- 1 file changed, 3 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index c530de1e63f5..3ad8ca76196d 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -88,6 +88,7 @@ struct kszphy_priv { static const struct kszphy_type ksz8021_type = { .led_mode_reg = MII_KSZPHY_CTRL_2, + .has_broadcast_disable = true, .has_rmii_ref_clk_sel = true, }; @@ -258,19 +259,6 @@ static int kszphy_config_init(struct phy_device *phydev) return 0; } -static int ksz8021_config_init(struct phy_device *phydev) -{ - int rc; - - rc = kszphy_config_init(phydev); - if (rc) - return rc; - - rc = kszphy_broadcast_disable(phydev); - - return rc < 0 ? rc : 0; -} - static int ksz9021_load_values_from_of(struct phy_device *phydev, struct device_node *of_node, u16 reg, char *field1, char *field2, @@ -584,7 +572,7 @@ static struct phy_driver ksphy_driver[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .driver_data = &ksz8021_type, .probe = kszphy_probe, - .config_init = ksz8021_config_init, + .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, @@ -601,7 +589,7 @@ static struct phy_driver ksphy_driver[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .driver_data = &ksz8021_type, .probe = kszphy_probe, - .config_init = ksz8021_config_init, + .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, -- cgit v1.2.1 From 16d8614b4f67fad7d12df34c53c9a1bab91fec49 Mon Sep 17 00:00:00 2001 From: Appana Durga Kedareswara Rao Date: Tue, 23 Dec 2014 18:07:55 +0530 Subject: net: xilinx: Remove unnecessary temac_property in the driver This property is no longer used in the code yet the code looks for it in the device tree. It does not cause an error if it's not in the tree. Signed-off-by: Kedareswara rao Appana Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_axienet.h | 2 -- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 4 ---- 2 files changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index 44b8d2bad8c3..4c9b4fa1d3c1 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -388,7 +388,6 @@ struct axidma_bd { * @dma_err_tasklet: Tasklet structure to process Axi DMA errors * @tx_irq: Axidma TX IRQ number * @rx_irq: Axidma RX IRQ number - * @temac_type: axienet type to identify between soft and hard temac * @phy_type: Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X * @options: AxiEthernet option word * @last_link: Phy link state in which the PHY was negotiated earlier @@ -431,7 +430,6 @@ struct axienet_local { int tx_irq; int rx_irq; - u32 temac_type; u32 phy_type; u32 options; /* Current options word */ diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 4ea2d4e6f1d1..c18a0c637c44 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -1555,10 +1555,6 @@ static int axienet_of_probe(struct platform_device *op) if ((be32_to_cpup(p)) >= 0x4000) lp->jumbo_support = 1; } - p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,temac-type", - NULL); - if (p) - lp->temac_type = be32_to_cpup(p); p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,phy-type", NULL); if (p) lp->phy_type = be32_to_cpup(p); -- cgit v1.2.1 From 6e4ab361b6f3eb41ffe63224a8b5770fc68ef710 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Tue, 23 Dec 2014 18:47:50 +0100 Subject: net: incorrect use of init_completion fixup The second init_completion call should be a reinit_completion here. patch is against 3.18.0 linux-next Signed-off-by: Nicholas Mc Guire Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bnad_debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c index 7d6aa8c87df8..619083a860a4 100644 --- a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c +++ b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c @@ -172,7 +172,7 @@ bnad_get_debug_drvinfo(struct bnad *bnad, void *buffer, u32 len) /* Retrieve flash partition info */ fcomp.comp_status = 0; - init_completion(&fcomp.comp); + reinit_completion(&fcomp.comp); spin_lock_irqsave(&bnad->bna_lock, flags); ret = bfa_nw_flash_get_attr(&bnad->bna.flash, &drvinfo->flash_attr, bnad_cb_completion, &fcomp); -- cgit v1.2.1 From 5f35227ea34bb616c436d9da47fc325866c428f3 Mon Sep 17 00:00:00 2001 From: Jesse Gross Date: Tue, 23 Dec 2014 22:37:26 -0800 Subject: net: Generalize ndo_gso_check to ndo_features_check GSO isn't the only offload feature with restrictions that potentially can't be expressed with the current features mechanism. Checksum is another although it's a general issue that could in theory apply to anything. Even if it may be possible to implement these restrictions in other ways, it can result in duplicate code or inefficient per-packet behavior. This generalizes ndo_gso_check so that drivers can remove any features that don't make sense for a given packet, similar to netif_skb_features(). It also converts existing driver restrictions to the new format, completing the work that was done to support tunnel protocols since the issues apply to checksums as well. By actually removing features from the set that are used to do offloading, it solves another problem with the existing interface. In these cases, GSO would run with the original set of features and not do anything because it appears that segmentation is not required. CC: Tom Herbert CC: Joe Stringer CC: Eric Dumazet CC: Hayes Wang Signed-off-by: Jesse Gross Acked-by: Tom Herbert Fixes: 04ffcb255f22 ("net: Add ndo_gso_check") Tested-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 8 +++++--- drivers/net/ethernet/emulex/benet/be_main.c | 8 +++++--- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 10 ++++++---- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 8 +++++--- 4 files changed, 21 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 9f5e38769a29..72eef9fc883e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12553,9 +12553,11 @@ static int bnx2x_get_phys_port_id(struct net_device *netdev, return 0; } -static bool bnx2x_gso_check(struct sk_buff *skb, struct net_device *dev) +static netdev_features_t bnx2x_features_check(struct sk_buff *skb, + struct net_device *dev, + netdev_features_t features) { - return vxlan_gso_check(skb); + return vxlan_features_check(skb, features); } static const struct net_device_ops bnx2x_netdev_ops = { @@ -12589,7 +12591,7 @@ static const struct net_device_ops bnx2x_netdev_ops = { #endif .ndo_get_phys_port_id = bnx2x_get_phys_port_id, .ndo_set_vf_link_state = bnx2x_set_vf_link_state, - .ndo_gso_check = bnx2x_gso_check, + .ndo_features_check = bnx2x_features_check, }; static int bnx2x_set_coherency_mask(struct bnx2x *bp) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 196073110e32..41a0a5498da7 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4459,9 +4459,11 @@ done: adapter->vxlan_port_count--; } -static bool be_gso_check(struct sk_buff *skb, struct net_device *dev) +static netdev_features_t be_features_check(struct sk_buff *skb, + struct net_device *dev, + netdev_features_t features) { - return vxlan_gso_check(skb); + return vxlan_features_check(skb, features); } #endif @@ -4492,7 +4494,7 @@ static const struct net_device_ops be_netdev_ops = { #ifdef CONFIG_BE2NET_VXLAN .ndo_add_vxlan_port = be_add_vxlan_port, .ndo_del_vxlan_port = be_del_vxlan_port, - .ndo_gso_check = be_gso_check, + .ndo_features_check = be_features_check, #endif }; diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 190cbd931f6b..d0d6dc1b8e46 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2365,9 +2365,11 @@ static void mlx4_en_del_vxlan_port(struct net_device *dev, queue_work(priv->mdev->workqueue, &priv->vxlan_del_task); } -static bool mlx4_en_gso_check(struct sk_buff *skb, struct net_device *dev) +static netdev_features_t mlx4_en_features_check(struct sk_buff *skb, + struct net_device *dev, + netdev_features_t features) { - return vxlan_gso_check(skb); + return vxlan_features_check(skb, features); } #endif @@ -2400,7 +2402,7 @@ static const struct net_device_ops mlx4_netdev_ops = { #ifdef CONFIG_MLX4_EN_VXLAN .ndo_add_vxlan_port = mlx4_en_add_vxlan_port, .ndo_del_vxlan_port = mlx4_en_del_vxlan_port, - .ndo_gso_check = mlx4_en_gso_check, + .ndo_features_check = mlx4_en_features_check, #endif }; @@ -2434,7 +2436,7 @@ static const struct net_device_ops mlx4_netdev_ops_master = { #ifdef CONFIG_MLX4_EN_VXLAN .ndo_add_vxlan_port = mlx4_en_add_vxlan_port, .ndo_del_vxlan_port = mlx4_en_del_vxlan_port, - .ndo_gso_check = mlx4_en_gso_check, + .ndo_features_check = mlx4_en_features_check, #endif }; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 1aa25b13ace1..9929b97cfb36 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -505,9 +505,11 @@ static void qlcnic_del_vxlan_port(struct net_device *netdev, adapter->flags |= QLCNIC_DEL_VXLAN_PORT; } -static bool qlcnic_gso_check(struct sk_buff *skb, struct net_device *dev) +static netdev_features_t qlcnic_features_check(struct sk_buff *skb, + struct net_device *dev, + netdev_features_t features) { - return vxlan_gso_check(skb); + return vxlan_features_check(skb, features); } #endif @@ -532,7 +534,7 @@ static const struct net_device_ops qlcnic_netdev_ops = { #ifdef CONFIG_QLCNIC_VXLAN .ndo_add_vxlan_port = qlcnic_add_vxlan_port, .ndo_del_vxlan_port = qlcnic_del_vxlan_port, - .ndo_gso_check = qlcnic_gso_check, + .ndo_features_check = qlcnic_features_check, #endif #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = qlcnic_poll_controller, -- cgit v1.2.1 From a22a9e4141474b9f314947f159817050a1db58d8 Mon Sep 17 00:00:00 2001 From: Wengang Wang Date: Tue, 23 Dec 2014 09:24:36 +0800 Subject: bonding: change error message to debug message in __bond_release_one() In __bond_release_one(), when the interface is not a slave or not a slave of "this" master, it log error message. The message actually should be a debug message matching what bond_enslave() does. Signed-off-by: Wengang Wang Acked-by: Ding Tianhong Signed-off-by: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 184c434ae305..0dceba1a2ba1 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1648,7 +1648,7 @@ static int __bond_release_one(struct net_device *bond_dev, /* slave is not a slave or master is not master of this slave */ if (!(slave_dev->flags & IFF_SLAVE) || !netdev_has_upper_dev(slave_dev, bond_dev)) { - netdev_err(bond_dev, "cannot release %s\n", + netdev_dbg(bond_dev, "cannot release %s\n", slave_dev->name); return -EINVAL; } -- cgit v1.2.1 From eb69c5bf8273edbe1c5c748fa299b5e5a08f35d6 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Tue, 23 Dec 2014 11:29:03 +0800 Subject: ne2k-pci: Add pci_disable_device in error handling For linux-3.18.0 The driver lacks pci_disable_device in error handling code of ne2k_pci_init_one, so the device enabled by pci_enable_device is not disabled when errors occur. This patch fixes this problem. Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller --- drivers/net/ethernet/8390/ne2k-pci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/8390/ne2k-pci.c b/drivers/net/ethernet/8390/ne2k-pci.c index 89c8d9fc97de..57e97910c728 100644 --- a/drivers/net/ethernet/8390/ne2k-pci.c +++ b/drivers/net/ethernet/8390/ne2k-pci.c @@ -246,13 +246,13 @@ static int ne2k_pci_init_one(struct pci_dev *pdev, if (!ioaddr || ((pci_resource_flags (pdev, 0) & IORESOURCE_IO) == 0)) { dev_err(&pdev->dev, "no I/O resource at PCI BAR #0\n"); - return -ENODEV; + goto err_out; } if (request_region (ioaddr, NE_IO_EXTENT, DRV_NAME) == NULL) { dev_err(&pdev->dev, "I/O resource 0x%x @ 0x%lx busy\n", NE_IO_EXTENT, ioaddr); - return -EBUSY; + goto err_out; } reg0 = inb(ioaddr); @@ -392,6 +392,8 @@ err_out_free_netdev: free_netdev (dev); err_out_free_res: release_region (ioaddr, NE_IO_EXTENT); +err_out: + pci_disable_device(pdev); return -ENODEV; } -- cgit v1.2.1