From 1c7c1fe51629d82e1dff22b2c4d409b252fb2b05 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 27 Jul 2005 11:31:19 +0100 Subject: [SERIAL] Rename pci_board to pciserial_board. Signed-off-by: Russell King --- drivers/serial/8250_pci.c | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 356f5556759a..84c8f8f592ca 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -54,7 +54,7 @@ /* Use the Base address register size to cap number of ports */ #define FL_REGION_SZ_CAP 0x0100 -struct pci_board { +struct pciserial_board { unsigned int flags; unsigned int num_ports; unsigned int base_baud; @@ -75,7 +75,7 @@ struct pci_serial_quirk { u32 subvendor; u32 subdevice; int (*init)(struct pci_dev *dev); - int (*setup)(struct pci_dev *dev, struct pci_board *board, + int (*setup)(struct pci_dev *dev, struct pciserial_board *, struct uart_port *port, int idx); void (*exit)(struct pci_dev *dev); }; @@ -136,7 +136,7 @@ setup_port(struct pci_dev *dev, struct uart_port *port, * Not that ugly ;) -- HW */ static int -afavlab_setup(struct pci_dev *dev, struct pci_board *board, +afavlab_setup(struct pci_dev *dev, struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int bar, offset = board->first_offset; @@ -189,7 +189,7 @@ static int __devinit pci_hp_diva_init(struct pci_dev *dev) * some serial ports are supposed to be hidden on certain models. */ static int -pci_hp_diva_setup(struct pci_dev *dev, struct pci_board *board, +pci_hp_diva_setup(struct pci_dev *dev, struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int offset = board->first_offset; @@ -307,7 +307,7 @@ static void __devexit pci_plx9050_exit(struct pci_dev *dev) /* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ static int -sbs_setup(struct pci_dev *dev, struct pci_board *board, +sbs_setup(struct pci_dev *dev, struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int bar, offset = board->first_offset; @@ -523,7 +523,7 @@ static int __devinit pci_timedia_init(struct pci_dev *dev) * Ugh, this is ugly as all hell --- TYT */ static int -pci_timedia_setup(struct pci_dev *dev, struct pci_board *board, +pci_timedia_setup(struct pci_dev *dev, struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int bar = 0, offset = board->first_offset; @@ -556,7 +556,8 @@ pci_timedia_setup(struct pci_dev *dev, struct pci_board *board, * Some Titan cards are also a little weird */ static int -titan_400l_800l_setup(struct pci_dev *dev, struct pci_board *board, +titan_400l_800l_setup(struct pci_dev *dev, + struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int bar, offset = board->first_offset; @@ -593,7 +594,7 @@ static int __devinit pci_netmos_init(struct pci_dev *dev) } static int -pci_default_setup(struct pci_dev *dev, struct pci_board *board, +pci_default_setup(struct pci_dev *dev, struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int bar, offset = board->first_offset, maxnr; @@ -990,7 +991,7 @@ static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) } static _INLINE_ int -get_pci_irq(struct pci_dev *dev, struct pci_board *board, int idx) +get_pci_irq(struct pci_dev *dev, struct pciserial_board *board, int idx) { if (board->flags & FL_NOIRQ) return 0; @@ -1113,7 +1114,7 @@ enum pci_board_num_t { * see first lines of serial_in() and serial_out() in 8250.c */ -static struct pci_board pci_boards[] __devinitdata = { +static struct pciserial_board pci_boards[] __devinitdata = { [pbn_default] = { .flags = FL_BASE0, .num_ports = 1, @@ -1565,7 +1566,7 @@ static struct pci_board pci_boards[] __devinitdata = { * serial specs. Returns 0 on success, 1 on failure. */ static int __devinit -serial_pci_guess_board(struct pci_dev *dev, struct pci_board *board) +serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) { int num_iomem, num_port, first_port = -1, i; @@ -1630,7 +1631,8 @@ serial_pci_guess_board(struct pci_dev *dev, struct pci_board *board) } static inline int -serial_pci_matches(struct pci_board *board, struct pci_board *guessed) +serial_pci_matches(struct pciserial_board *board, + struct pciserial_board *guessed) { return board->num_ports == guessed->num_ports && @@ -1648,7 +1650,7 @@ static int __devinit pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) { struct serial_private *priv; - struct pci_board *board, tmp; + struct pciserial_board *board, tmp; struct pci_serial_quirk *quirk; int rc, nr_ports, i; @@ -1669,7 +1671,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) * Use a copy of the pci_board entry for this; * avoid changing entries in the table. */ - memcpy(&tmp, board, sizeof(struct pci_board)); + memcpy(&tmp, board, sizeof(struct pciserial_board)); board = &tmp; /* @@ -1685,7 +1687,8 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) * detect this boards settings with our heuristic, * then we no longer need this entry. */ - memcpy(&tmp, &pci_boards[pbn_default], sizeof(struct pci_board)); + memcpy(&tmp, &pci_boards[pbn_default], + sizeof(struct pciserial_board)); rc = serial_pci_guess_board(dev, &tmp); if (rc == 0 && serial_pci_matches(board, &tmp)) moan_device("Redundant entry in serial pci_table.", -- cgit v1.2.1 From 72ce9a83331afdd4df944f210a5210bf5acb7d6a Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 27 Jul 2005 11:32:04 +0100 Subject: [SERIAL] Factor out the common setup from the per-serial port loop. Signed-off-by: Russell King --- drivers/serial/8250_pci.c | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 84c8f8f592ca..8f2617206e8f 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -110,8 +110,9 @@ setup_port(struct pci_dev *dev, struct uart_port *port, if (bar >= PCI_NUM_BAR_RESOURCES) return -EINVAL; + base = pci_resource_start(dev, bar); + if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { - base = pci_resource_start(dev, bar); len = pci_resource_len(dev, bar); if (!priv->remapped_bar[bar]) @@ -120,13 +121,16 @@ setup_port(struct pci_dev *dev, struct uart_port *port, return -ENOMEM; port->iotype = UPIO_MEM; + port->iobase = 0; port->mapbase = base + offset; port->membase = priv->remapped_bar[bar] + offset; port->regshift = regshift; } else { - base = pci_resource_start(dev, bar) + offset; port->iotype = UPIO_PORT; - port->iobase = base; + port->iobase = base + offset; + port->mapbase = 0; + port->membase = NULL; + port->regshift = 0; } return 0; } @@ -991,7 +995,7 @@ static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) } static _INLINE_ int -get_pci_irq(struct pci_dev *dev, struct pciserial_board *board, int idx) +get_pci_irq(struct pci_dev *dev, struct pciserial_board *board) { if (board->flags & FL_NOIRQ) return 0; @@ -1649,6 +1653,7 @@ serial_pci_matches(struct pciserial_board *board, static int __devinit pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) { + struct uart_port serial_port; struct serial_private *priv; struct pciserial_board *board, tmp; struct pci_serial_quirk *quirk; @@ -1731,17 +1736,16 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) priv->quirk = quirk; pci_set_drvdata(dev, priv); + memset(&serial_port, 0, sizeof(struct uart_port)); + serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + serial_port.uartclk = board->base_baud * 16; + serial_port.irq = get_pci_irq(dev, board); + serial_port.dev = &dev->dev; + for (i = 0; i < nr_ports; i++) { - struct uart_port serial_port; - memset(&serial_port, 0, sizeof(struct uart_port)); - - serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | - UPF_SHARE_IRQ; - serial_port.uartclk = board->base_baud * 16; - serial_port.irq = get_pci_irq(dev, board, i); - serial_port.dev = &dev->dev; if (quirk->setup(dev, board, &serial_port, i)) break; + #ifdef SERIAL_DEBUG_PCI printk("Setup PCI port: port %x, irq %d, type %d\n", serial_port.iobase, serial_port.irq, serial_port.iotype); -- cgit v1.2.1 From 67d74b870725448e0108984eec551609771e6b73 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 27 Jul 2005 11:33:03 +0100 Subject: [SERIAL] Collapse the SIIG quirk entries Collapse all the SIIG quirk entries into one. SIIG10x cards all have PCI device IDs of 0x10xx, SIIG20x cards all have PCI device IDs of 0x20xx. Signed-off-by: Russell King --- drivers/serial/8250_pci.c | 157 ++++++---------------------------------------- 1 file changed, 18 insertions(+), 139 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 8f2617206e8f..c43de35a6c9d 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -393,6 +393,9 @@ static void __devexit sbs_exit(struct pci_dev *dev) * - 10x cards have control registers in IO and/or memory space; * - 20x cards have control registers in standard PCI configuration space. * + * Note: all 10x cards have PCI device ids 0x10.. + * all 20x cards have PCI device ids 0x20.. + * * There are also Quartet Serial cards which use Oxford Semiconductor * 16954 quad UART PCI chip clocked by 18.432 MHz quartz. * @@ -449,6 +452,19 @@ static int pci_siig20x_init(struct pci_dev *dev) return 0; } +static int pci_siig_init(struct pci_dev *dev) +{ + unsigned int type = dev->device & 0xff00; + + if (type == 0x1000) + return pci_siig10x_init(dev); + else if (type == 0x2000) + return pci_siig20x_init(dev); + + moan_device("Unknown SIIG card", dev); + return -ENODEV; +} + int pci_siig10x_fn(struct pci_dev *dev, int enable) { int ret = 0; @@ -759,152 +775,15 @@ static struct pci_serial_quirk pci_serial_quirks[] = { .setup = sbs_setup, .exit = __devexit_p(sbs_exit), }, - /* * SIIG cards. - * It is not clear whether these could be collapsed. */ { .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_DEVICE_ID_SIIG_1S_10x_550, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig10x_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_DEVICE_ID_SIIG_1S_10x_650, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig10x_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_DEVICE_ID_SIIG_1S_10x_850, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig10x_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_DEVICE_ID_SIIG_2S_10x_550, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig10x_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_DEVICE_ID_SIIG_2S_10x_650, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig10x_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_DEVICE_ID_SIIG_2S_10x_850, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig10x_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_DEVICE_ID_SIIG_4S_10x_550, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig10x_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_DEVICE_ID_SIIG_4S_10x_650, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig10x_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_DEVICE_ID_SIIG_4S_10x_850, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig10x_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_DEVICE_ID_SIIG_1S_20x_550, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig20x_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_DEVICE_ID_SIIG_1S_20x_650, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig20x_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_DEVICE_ID_SIIG_1S_20x_850, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig20x_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_DEVICE_ID_SIIG_2S_20x_550, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig20x_init, - .setup = pci_default_setup, - }, - { .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_DEVICE_ID_SIIG_2S_20x_650, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig20x_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_DEVICE_ID_SIIG_2S_20x_850, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig20x_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_DEVICE_ID_SIIG_4S_20x_550, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig20x_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_DEVICE_ID_SIIG_4S_20x_650, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig20x_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_DEVICE_ID_SIIG_4S_20x_850, + .device = PCI_ANY_ID, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .init = pci_siig20x_init, + .init = pci_siig_init, .setup = pci_default_setup, }, /* -- cgit v1.2.1 From 70db3d91a5228c98603c55fa06c87184a1f9f6db Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 27 Jul 2005 11:34:27 +0100 Subject: [SERIAL] Pass around serial_private instead of pci_dev Pass the serial_private structure via the setup method instead of the pci_dev. We don't want to assume that the pci_dev's driver data is a pointer to serial_private. Instead, put the pci_dev inside serial_private. Signed-off-by: Russell King --- drivers/serial/8250_pci.c | 40 ++++++++++++++++++++++------------------ 1 file changed, 22 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index c43de35a6c9d..7ca07651c10c 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -63,6 +63,8 @@ struct pciserial_board { unsigned int first_offset; }; +struct serial_private; + /* * init function returns: * > 0 - number of ports @@ -75,7 +77,7 @@ struct pci_serial_quirk { u32 subvendor; u32 subdevice; int (*init)(struct pci_dev *dev); - int (*setup)(struct pci_dev *dev, struct pciserial_board *, + int (*setup)(struct serial_private *, struct pciserial_board *, struct uart_port *port, int idx); void (*exit)(struct pci_dev *dev); }; @@ -83,6 +85,7 @@ struct pci_serial_quirk { #define PCI_NUM_BAR_RESOURCES 6 struct serial_private { + struct pci_dev *dev; unsigned int nr; void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES]; struct pci_serial_quirk *quirk; @@ -101,10 +104,10 @@ static void moan_device(const char *str, struct pci_dev *dev) } static int -setup_port(struct pci_dev *dev, struct uart_port *port, +setup_port(struct serial_private *priv, struct uart_port *port, int bar, int offset, int regshift) { - struct serial_private *priv = pci_get_drvdata(dev); + struct pci_dev *dev = priv->dev; unsigned long base, len; if (bar >= PCI_NUM_BAR_RESOURCES) @@ -140,7 +143,7 @@ setup_port(struct pci_dev *dev, struct uart_port *port, * Not that ugly ;) -- HW */ static int -afavlab_setup(struct pci_dev *dev, struct pciserial_board *board, +afavlab_setup(struct serial_private *priv, struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int bar, offset = board->first_offset; @@ -153,7 +156,7 @@ afavlab_setup(struct pci_dev *dev, struct pciserial_board *board, offset += (idx - 4) * board->uart_offset; } - return setup_port(dev, port, bar, offset, board->reg_shift); + return setup_port(priv, port, bar, offset, board->reg_shift); } /* @@ -193,13 +196,13 @@ static int __devinit pci_hp_diva_init(struct pci_dev *dev) * some serial ports are supposed to be hidden on certain models. */ static int -pci_hp_diva_setup(struct pci_dev *dev, struct pciserial_board *board, +pci_hp_diva_setup(struct serial_private *priv, struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int offset = board->first_offset; unsigned int bar = FL_GET_BASE(board->flags); - switch (dev->subsystem_device) { + switch (priv->dev->subsystem_device) { case PCI_DEVICE_ID_HP_DIVA_MAESTRO: if (idx == 3) idx++; @@ -216,7 +219,7 @@ pci_hp_diva_setup(struct pci_dev *dev, struct pciserial_board *board, offset += idx * board->uart_offset; - return setup_port(dev, port, bar, offset, board->reg_shift); + return setup_port(priv, port, bar, offset, board->reg_shift); } /* @@ -311,7 +314,7 @@ static void __devexit pci_plx9050_exit(struct pci_dev *dev) /* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ static int -sbs_setup(struct pci_dev *dev, struct pciserial_board *board, +sbs_setup(struct serial_private *priv, struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int bar, offset = board->first_offset; @@ -327,7 +330,7 @@ sbs_setup(struct pci_dev *dev, struct pciserial_board *board, } else /* we have only 8 ports on PMC-OCTALPRO */ return 1; - return setup_port(dev, port, bar, offset, board->reg_shift); + return setup_port(priv, port, bar, offset, board->reg_shift); } /* @@ -543,7 +546,7 @@ static int __devinit pci_timedia_init(struct pci_dev *dev) * Ugh, this is ugly as all hell --- TYT */ static int -pci_timedia_setup(struct pci_dev *dev, struct pciserial_board *board, +pci_timedia_setup(struct serial_private *priv, struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int bar = 0, offset = board->first_offset; @@ -569,14 +572,14 @@ pci_timedia_setup(struct pci_dev *dev, struct pciserial_board *board, bar = idx - 2; } - return setup_port(dev, port, bar, offset, board->reg_shift); + return setup_port(priv, port, bar, offset, board->reg_shift); } /* * Some Titan cards are also a little weird */ static int -titan_400l_800l_setup(struct pci_dev *dev, +titan_400l_800l_setup(struct serial_private *priv, struct pciserial_board *board, struct uart_port *port, int idx) { @@ -594,7 +597,7 @@ titan_400l_800l_setup(struct pci_dev *dev, offset = (idx - 2) * board->uart_offset; } - return setup_port(dev, port, bar, offset, board->reg_shift); + return setup_port(priv, port, bar, offset, board->reg_shift); } static int __devinit pci_xircom_init(struct pci_dev *dev) @@ -614,7 +617,7 @@ static int __devinit pci_netmos_init(struct pci_dev *dev) } static int -pci_default_setup(struct pci_dev *dev, struct pciserial_board *board, +pci_default_setup(struct serial_private *priv, struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int bar, offset = board->first_offset, maxnr; @@ -625,13 +628,13 @@ pci_default_setup(struct pci_dev *dev, struct pciserial_board *board, else offset += idx * board->uart_offset; - maxnr = (pci_resource_len(dev, bar) - board->first_offset) / + maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) / (8 << board->reg_shift); if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) return 1; - return setup_port(dev, port, bar, offset, board->reg_shift); + return setup_port(priv, port, bar, offset, board->reg_shift); } /* This should be in linux/pci_ids.h */ @@ -1612,6 +1615,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) memset(priv, 0, sizeof(struct serial_private) + sizeof(unsigned int) * nr_ports); + priv->dev = dev; priv->quirk = quirk; pci_set_drvdata(dev, priv); @@ -1622,7 +1626,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) serial_port.dev = &dev->dev; for (i = 0; i < nr_ports; i++) { - if (quirk->setup(dev, board, &serial_port, i)) + if (quirk->setup(priv, board, &serial_port, i)) break; #ifdef SERIAL_DEBUG_PCI -- cgit v1.2.1 From 241fc4367b3ca5d407b043599ed980304a70b91f Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 27 Jul 2005 11:35:54 +0100 Subject: [SERIAL] Expose 8250_pci setup/removal/suspend/resume functions Re-jig the setup/removal/suspend/resume of 8250 pci ports so that they know slightly less about how they're attached to a PCI device. Expose this as the new interface for registering PCI serial ports, as well as the pciserial_board structure and associated flag definitions. Signed-off-by: Russell King --- drivers/serial/8250_pci.c | 233 ++++++++++++++++++++++++---------------------- 1 file changed, 121 insertions(+), 112 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 7ca07651c10c..4e9084edfc7e 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -33,38 +33,6 @@ #undef SERIAL_DEBUG_PCI -/* - * Definitions for PCI support. - */ -#define FL_BASE_MASK 0x0007 -#define FL_BASE0 0x0000 -#define FL_BASE1 0x0001 -#define FL_BASE2 0x0002 -#define FL_BASE3 0x0003 -#define FL_BASE4 0x0004 -#define FL_GET_BASE(x) (x & FL_BASE_MASK) - -/* Use successive BARs (PCI base address registers), - else use offset into some specified BAR */ -#define FL_BASE_BARS 0x0008 - -/* do not assign an irq */ -#define FL_NOIRQ 0x0080 - -/* Use the Base address register size to cap number of ports */ -#define FL_REGION_SZ_CAP 0x0100 - -struct pciserial_board { - unsigned int flags; - unsigned int num_ports; - unsigned int base_baud; - unsigned int uart_offset; - unsigned int reg_shift; - unsigned int first_offset; -}; - -struct serial_private; - /* * init function returns: * > 0 - number of ports @@ -1528,60 +1496,14 @@ serial_pci_matches(struct pciserial_board *board, board->first_offset == guessed->first_offset; } -/* - * Probe one serial board. Unfortunately, there is no rhyme nor reason - * to the arrangement of serial ports on a PCI card. - */ -static int __devinit -pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) +struct serial_private * +pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board) { struct uart_port serial_port; struct serial_private *priv; - struct pciserial_board *board, tmp; struct pci_serial_quirk *quirk; int rc, nr_ports, i; - if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { - printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n", - ent->driver_data); - return -EINVAL; - } - - board = &pci_boards[ent->driver_data]; - - rc = pci_enable_device(dev); - if (rc) - return rc; - - if (ent->driver_data == pbn_default) { - /* - * Use a copy of the pci_board entry for this; - * avoid changing entries in the table. - */ - memcpy(&tmp, board, sizeof(struct pciserial_board)); - board = &tmp; - - /* - * We matched one of our class entries. Try to - * determine the parameters of this board. - */ - rc = serial_pci_guess_board(dev, board); - if (rc) - goto disable; - } else { - /* - * We matched an explicit entry. If we are able to - * detect this boards settings with our heuristic, - * then we no longer need this entry. - */ - memcpy(&tmp, &pci_boards[pbn_default], - sizeof(struct pciserial_board)); - rc = serial_pci_guess_board(dev, &tmp); - if (rc == 0 && serial_pci_matches(board, &tmp)) - moan_device("Redundant entry in serial pci_table.", - dev); - } - nr_ports = board->num_ports; /* @@ -1598,8 +1520,10 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) */ if (quirk->init) { rc = quirk->init(dev); - if (rc < 0) - goto disable; + if (rc < 0) { + priv = ERR_PTR(rc); + goto err_out; + } if (rc) nr_ports = rc; } @@ -1608,8 +1532,8 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) sizeof(unsigned int) * nr_ports, GFP_KERNEL); if (!priv) { - rc = -ENOMEM; - goto deinit; + priv = ERR_PTR(-ENOMEM); + goto err_deinit; } memset(priv, 0, sizeof(struct serial_private) + @@ -1617,7 +1541,6 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) priv->dev = dev; priv->quirk = quirk; - pci_set_drvdata(dev, priv); memset(&serial_port, 0, sizeof(struct uart_port)); serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; @@ -1643,24 +1566,21 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) priv->nr = i; - return 0; + return priv; - deinit: + err_deinit: if (quirk->exit) quirk->exit(dev); - disable: - pci_disable_device(dev); - return rc; + err_out: + return priv; } +EXPORT_SYMBOL_GPL(pciserial_init_ports); -static void __devexit pciserial_remove_one(struct pci_dev *dev) +void pciserial_remove_ports(struct serial_private *priv) { - struct serial_private *priv = pci_get_drvdata(dev); struct pci_serial_quirk *quirk; int i; - pci_set_drvdata(dev, NULL); - for (i = 0; i < priv->nr; i++) serial8250_unregister_port(priv->line[i]); @@ -1673,25 +1593,123 @@ static void __devexit pciserial_remove_one(struct pci_dev *dev) /* * Find the exit quirks. */ - quirk = find_quirk(dev); + quirk = find_quirk(priv->dev); if (quirk->exit) - quirk->exit(dev); + quirk->exit(priv->dev); + + kfree(priv); +} +EXPORT_SYMBOL_GPL(pciserial_remove_ports); + +void pciserial_suspend_ports(struct serial_private *priv) +{ + int i; + + for (i = 0; i < priv->nr; i++) + if (priv->line[i] >= 0) + serial8250_suspend_port(priv->line[i]); +} +EXPORT_SYMBOL_GPL(pciserial_suspend_ports); + +void pciserial_resume_ports(struct serial_private *priv) +{ + int i; + + /* + * Ensure that the board is correctly configured. + */ + if (priv->quirk->init) + priv->quirk->init(priv->dev); + + for (i = 0; i < priv->nr; i++) + if (priv->line[i] >= 0) + serial8250_resume_port(priv->line[i]); +} +EXPORT_SYMBOL_GPL(pciserial_resume_ports); + +/* + * Probe one serial board. Unfortunately, there is no rhyme nor reason + * to the arrangement of serial ports on a PCI card. + */ +static int __devinit +pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) +{ + struct serial_private *priv; + struct pciserial_board *board, tmp; + int rc; + + if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { + printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n", + ent->driver_data); + return -EINVAL; + } + + board = &pci_boards[ent->driver_data]; + + rc = pci_enable_device(dev); + if (rc) + return rc; + + if (ent->driver_data == pbn_default) { + /* + * Use a copy of the pci_board entry for this; + * avoid changing entries in the table. + */ + memcpy(&tmp, board, sizeof(struct pciserial_board)); + board = &tmp; + + /* + * We matched one of our class entries. Try to + * determine the parameters of this board. + */ + rc = serial_pci_guess_board(dev, board); + if (rc) + goto disable; + } else { + /* + * We matched an explicit entry. If we are able to + * detect this boards settings with our heuristic, + * then we no longer need this entry. + */ + memcpy(&tmp, &pci_boards[pbn_default], + sizeof(struct pciserial_board)); + rc = serial_pci_guess_board(dev, &tmp); + if (rc == 0 && serial_pci_matches(board, &tmp)) + moan_device("Redundant entry in serial pci_table.", + dev); + } + + priv = pciserial_init_ports(dev, board); + if (!IS_ERR(priv)) { + pci_set_drvdata(dev, priv); + return 0; + } + + rc = PTR_ERR(priv); + disable: pci_disable_device(dev); + return rc; +} - kfree(priv); +static void __devexit pciserial_remove_one(struct pci_dev *dev) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + pci_set_drvdata(dev, NULL); + + pciserial_remove_ports(priv); + + pci_disable_device(dev); } static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state) { struct serial_private *priv = pci_get_drvdata(dev); - if (priv) { - int i; + if (priv) + pciserial_suspend_ports(priv); - for (i = 0; i < priv->nr; i++) - serial8250_suspend_port(priv->line[i]); - } pci_save_state(dev); pci_set_power_state(dev, pci_choose_state(dev, state)); return 0; @@ -1705,21 +1723,12 @@ static int pciserial_resume_one(struct pci_dev *dev) pci_restore_state(dev); if (priv) { - int i; - /* * The device may have been disabled. Re-enable it. */ pci_enable_device(dev); - /* - * Ensure that the board is correctly configured. - */ - if (priv->quirk->init) - priv->quirk->init(dev); - - for (i = 0; i < priv->nr; i++) - serial8250_resume_port(priv->line[i]); + pciserial_resume_ports(priv); } return 0; } -- cgit v1.2.1 From 05caac585f8abd6c0113856bc8858e3ef214d8a6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 27 Jul 2005 11:41:18 +0100 Subject: [SERIAL] Convert parport_serial to use new 8250_pci interfaces Convert parport_serial to use the new 8250_pci interface, converting the table to a pciserial_board table. This also unuses the SPCI_* definitions in serialP.h, which can now be removed. Signed-off-by: Russell King --- drivers/parport/parport_serial.c | 339 +++++++++++++++++++-------------------- drivers/serial/8250_pci.c | 21 +-- 2 files changed, 167 insertions(+), 193 deletions(-) (limited to 'drivers') diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c index 00498e2f1205..d3dad0aac7cb 100644 --- a/drivers/parport/parport_serial.c +++ b/drivers/parport/parport_serial.c @@ -23,13 +23,8 @@ #include #include #include -#include -#include -#include #include -#include - enum parport_pc_pci_cards { titan_110l = 0, titan_210l, @@ -168,182 +163,147 @@ static struct pci_device_id parport_serial_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl); -struct pci_board_no_ids { - int flags; - int num_ports; - int base_baud; - int uart_offset; - int reg_shift; - int (*init_fn)(struct pci_dev *dev, struct pci_board_no_ids *board, - int enable); - int first_uart_offset; -}; - -static int __devinit siig10x_init_fn(struct pci_dev *dev, struct pci_board_no_ids *board, int enable) -{ - return pci_siig10x_fn(dev, enable); -} - -static int __devinit siig20x_init_fn(struct pci_dev *dev, struct pci_board_no_ids *board, int enable) -{ - return pci_siig20x_fn(dev, enable); -} - -static int __devinit netmos_serial_init(struct pci_dev *dev, struct pci_board_no_ids *board, int enable) -{ - board->num_ports = dev->subsystem_device & 0xf; - return 0; -} - -static struct pci_board_no_ids pci_boards[] __devinitdata = { - /* - * PCI Flags, Number of Ports, Base (Maximum) Baud Rate, - * Offset to get to next UART's registers, - * Register shift to use for memory-mapped I/O, - * Initialization function, first UART offset - */ - -// Cards not tested are marked n/t -// If you have one of these cards and it works for you, please tell me.. - -/* titan_110l */ { SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 1, 921600 }, -/* titan_210l */ { SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 2, 921600 }, -/* netmos_9xx5_combo */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200, 0, 0, netmos_serial_init }, -/* netmos_9855 */ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 1, 115200, 0, 0, netmos_serial_init }, -/* avlab_1s1p (n/t) */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 }, -/* avlab_1s1p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 }, -/* avlab_1s1p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 }, -/* avlab_1s2p (n/t) */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 }, -/* avlab_1s2p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 }, -/* avlab_1s2p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 }, -/* avlab_2s1p (n/t) */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 }, -/* avlab_2s1p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 }, -/* avlab_2s1p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 }, -/* siig_1s1p_10x */ { SPCI_FL_BASE2, 1, 460800, 0, 0, siig10x_init_fn }, -/* siig_2s1p_10x */ { SPCI_FL_BASE2, 1, 921600, 0, 0, siig10x_init_fn }, -/* siig_2p1s_20x */ { SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn }, -/* siig_1s1p_20x */ { SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn }, -/* siig_2s1p_20x */ { SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn }, +/* + * This table describes the serial "geometry" of these boards. Any + * quirks for these can be found in drivers/serial/8250_pci.c + * + * Cards not tested are marked n/t + * If you have one of these cards and it works for you, please tell me.. + */ +static struct pciserial_board pci_parport_serial_boards[] __devinitdata = { + [titan_110l] = { + .flags = FL_BASE1 | FL_BASE_BARS, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [titan_210l] = { + .flags = FL_BASE1 | FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [netmos_9xx5_combo] = { + .flags = FL_BASE0 | FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [netmos_9855] = { + .flags = FL_BASE2 | FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [avlab_1s1p] = { /* n/t */ + .flags = FL_BASE0 | FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [avlab_1s1p_650] = { /* nt */ + .flags = FL_BASE0 | FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [avlab_1s1p_850] = { /* nt */ + .flags = FL_BASE0 | FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [avlab_1s2p] = { /* n/t */ + .flags = FL_BASE0 | FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [avlab_1s2p_650] = { /* nt */ + .flags = FL_BASE0 | FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [avlab_1s2p_850] = { /* nt */ + .flags = FL_BASE0 | FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [avlab_2s1p] = { /* n/t */ + .flags = FL_BASE0 | FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [avlab_2s1p_650] = { /* nt */ + .flags = FL_BASE0 | FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [avlab_2s1p_850] = { /* nt */ + .flags = FL_BASE0 | FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [siig_1s1p_10x] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 460800, + .uart_offset = 8, + }, + [siig_2s1p_10x] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [siig_2p1s_20x] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [siig_1s1p_20x] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [siig_2s1p_20x] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, }; struct parport_serial_private { - int num_ser; - int line[20]; - struct pci_board_no_ids ser; + struct serial_private *serial; int num_par; struct parport *port[PARPORT_MAX]; struct parport_pc_pci par; }; -static int __devinit get_pci_port (struct pci_dev *dev, - struct pci_board_no_ids *board, - struct serial_struct *req, - int idx) -{ - unsigned long port; - int base_idx; - int max_port; - int offset; - - base_idx = SPCI_FL_GET_BASE(board->flags); - if (board->flags & SPCI_FL_BASE_TABLE) - base_idx += idx; - - if (board->flags & SPCI_FL_REGION_SZ_CAP) { - max_port = pci_resource_len(dev, base_idx) / 8; - if (idx >= max_port) - return 1; - } - - offset = board->first_uart_offset; - - /* Timedia/SUNIX uses a mixture of BARs and offsets */ - /* Ugh, this is ugly as all hell --- TYT */ - if(dev->vendor == PCI_VENDOR_ID_TIMEDIA ) /* 0x1409 */ - switch(idx) { - case 0: base_idx=0; - break; - case 1: base_idx=0; offset=8; - break; - case 2: base_idx=1; - break; - case 3: base_idx=1; offset=8; - break; - case 4: /* BAR 2*/ - case 5: /* BAR 3 */ - case 6: /* BAR 4*/ - case 7: base_idx=idx-2; /* BAR 5*/ - } - - port = pci_resource_start(dev, base_idx) + offset; - - if ((board->flags & SPCI_FL_BASE_TABLE) == 0) - port += idx * (board->uart_offset ? board->uart_offset : 8); - - if (pci_resource_flags (dev, base_idx) & IORESOURCE_IO) { - int high_bits_offset = ((sizeof(long)-sizeof(int))*8); - req->port = port; - if (high_bits_offset) - req->port_high = port >> high_bits_offset; - else - req->port_high = 0; - return 0; - } - req->io_type = SERIAL_IO_MEM; - req->iomem_base = ioremap(port, board->uart_offset); - req->iomem_reg_shift = board->reg_shift; - req->port = 0; - return req->iomem_base ? 0 : 1; -} - /* Register the serial port(s) of a PCI card. */ static int __devinit serial_register (struct pci_dev *dev, const struct pci_device_id *id) { - struct pci_board_no_ids *board; struct parport_serial_private *priv = pci_get_drvdata (dev); - struct serial_struct serial_req; - int base_baud; - int k; - int success = 0; - - priv->ser = pci_boards[id->driver_data]; - board = &priv->ser; - if (board->init_fn && ((board->init_fn) (dev, board, 1) != 0)) - return 1; - - base_baud = board->base_baud; - if (!base_baud) - base_baud = BASE_BAUD; - memset (&serial_req, 0, sizeof (serial_req)); - - for (k = 0; k < board->num_ports; k++) { - int line; + struct pciserial_board *board; + struct serial_private *serial; - if (priv->num_ser == ARRAY_SIZE (priv->line)) { - printk (KERN_WARNING - "parport_serial: %s: only %u serial lines " - "supported (%d reported)\n", pci_name (dev), - ARRAY_SIZE (priv->line), board->num_ports); - break; - } + board = &pci_parport_serial_boards[id->driver_data]; + serial = pciserial_init_ports(dev, board); - serial_req.irq = dev->irq; - if (get_pci_port (dev, board, &serial_req, k)) - break; - serial_req.flags = ASYNC_SKIP_TEST | ASYNC_AUTOPROBE; - serial_req.baud_base = base_baud; - line = register_serial (&serial_req); - if (line < 0) { - printk (KERN_DEBUG - "parport_serial: register_serial failed\n"); - continue; - } - priv->line[priv->num_ser++] = line; - success = 1; - } + if (IS_ERR(serial)) + return PTR_ERR(serial); - return success ? 0 : 1; + priv->serial = serial; + return 0; } /* Register the parallel port(s) of a PCI card. */ @@ -411,7 +371,7 @@ static int __devinit parport_serial_pci_probe (struct pci_dev *dev, priv = kmalloc (sizeof *priv, GFP_KERNEL); if (!priv) return -ENOMEM; - priv->num_ser = priv->num_par = 0; + memset(priv, 0, sizeof(struct parport_serial_private)); pci_set_drvdata (dev, priv); err = pci_enable_device (dev); @@ -444,15 +404,12 @@ static void __devexit parport_serial_pci_remove (struct pci_dev *dev) struct parport_serial_private *priv = pci_get_drvdata (dev); int i; + pci_set_drvdata(dev, NULL); + // Serial ports - for (i = 0; i < priv->num_ser; i++) { - unregister_serial (priv->line[i]); + if (priv->serial) + pciserial_remove_ports(priv->serial); - if (priv->ser.init_fn) - (priv->ser.init_fn) (dev, &priv->ser, 0); - } - pci_set_drvdata (dev, NULL); - // Parallel ports for (i = 0; i < priv->num_par; i++) parport_pc_unregister_port (priv->port[i]); @@ -461,11 +418,47 @@ static void __devexit parport_serial_pci_remove (struct pci_dev *dev) return; } +static int parport_serial_pci_suspend(struct pci_dev *dev, pm_message_t state) +{ + struct parport_serial_private *priv = pci_get_drvdata(dev); + + if (priv->serial) + pciserial_suspend_ports(priv->serial); + + /* FIXME: What about parport? */ + + pci_save_state(dev); + pci_set_power_state(dev, pci_choose_state(dev, state)); + return 0; +} + +static int parport_serial_pci_resume(struct pci_dev *dev) +{ + struct parport_serial_private *priv = pci_get_drvdata(dev); + + pci_set_power_state(dev, PCI_D0); + pci_restore_state(dev); + + /* + * The device may have been disabled. Re-enable it. + */ + pci_enable_device(dev); + + if (priv->serial) + pciserial_resume_ports(priv->serial); + + /* FIXME: What about parport? */ + + return 0; +} + static struct pci_driver parport_serial_pci_driver = { .name = "parport_serial", .id_table = parport_serial_pci_tbl, .probe = parport_serial_pci_probe, .remove = __devexit_p(parport_serial_pci_remove), + .suspend = parport_serial_pci_suspend, + .resume = parport_serial_pci_resume, }; diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 4e9084edfc7e..52b0a0558ed4 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -46,7 +46,7 @@ struct pci_serial_quirk { u32 subdevice; int (*init)(struct pci_dev *dev); int (*setup)(struct serial_private *, struct pciserial_board *, - struct uart_port *port, int idx); + struct uart_port *, int); void (*exit)(struct pci_dev *dev); }; @@ -436,25 +436,6 @@ static int pci_siig_init(struct pci_dev *dev) return -ENODEV; } -int pci_siig10x_fn(struct pci_dev *dev, int enable) -{ - int ret = 0; - if (enable) - ret = pci_siig10x_init(dev); - return ret; -} - -int pci_siig20x_fn(struct pci_dev *dev, int enable) -{ - int ret = 0; - if (enable) - ret = pci_siig20x_init(dev); - return ret; -} - -EXPORT_SYMBOL(pci_siig10x_fn); -EXPORT_SYMBOL(pci_siig20x_fn); - /* * Timedia has an explosion of boards, and to avoid the PCI table from * growing *huge*, we use this function to collapse some 70 entries -- cgit v1.2.1 From 00db8189d984d6c51226dafbbe4a667ce9b7d5da Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Sat, 30 Jul 2005 19:31:23 -0400 Subject: This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 2 + drivers/net/Makefile | 1 + drivers/net/phy/Kconfig | 57 +++ drivers/net/phy/Makefile | 9 + drivers/net/phy/cicada.c | 134 +++++++ drivers/net/phy/davicom.c | 195 ++++++++++ drivers/net/phy/lxt.c | 179 +++++++++ drivers/net/phy/marvell.c | 140 +++++++ drivers/net/phy/mdio_bus.c | 173 +++++++++ drivers/net/phy/phy.c | 862 +++++++++++++++++++++++++++++++++++++++++++ drivers/net/phy/phy.c.orig | 860 ++++++++++++++++++++++++++++++++++++++++++ drivers/net/phy/phy_device.c | 682 ++++++++++++++++++++++++++++++++++ drivers/net/phy/qsemi.c | 143 +++++++ 13 files changed, 3437 insertions(+) create mode 100644 drivers/net/phy/Kconfig create mode 100644 drivers/net/phy/Makefile create mode 100644 drivers/net/phy/cicada.c create mode 100644 drivers/net/phy/davicom.c create mode 100644 drivers/net/phy/lxt.c create mode 100644 drivers/net/phy/marvell.c create mode 100644 drivers/net/phy/mdio_bus.c create mode 100644 drivers/net/phy/phy.c create mode 100644 drivers/net/phy/phy.c.orig create mode 100644 drivers/net/phy/phy_device.c create mode 100644 drivers/net/phy/qsemi.c (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 8a835eb58808..1e50b8e32add 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -131,6 +131,8 @@ config NET_SB1000 source "drivers/net/arcnet/Kconfig" +source "drivers/net/phy/Kconfig" + # # Ethernet # diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 63c6d1e6d4d9..a369ae284a9a 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -65,6 +65,7 @@ obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o # obj-$(CONFIG_MII) += mii.o +obj-$(CONFIG_PHYLIB) += phy/ obj-$(CONFIG_SUNDANCE) += sundance.o obj-$(CONFIG_HAMACHI) += hamachi.o diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig new file mode 100644 index 000000000000..8b5db2343cc3 --- /dev/null +++ b/drivers/net/phy/Kconfig @@ -0,0 +1,57 @@ +# +# PHY Layer Configuration +# + +menu "PHY device support" + +config PHYLIB + bool "PHY Device support and infrastructure" + depends on NET_ETHERNET + help + Ethernet controllers are usually attached to PHY + devices. This option provides infrastructure for + managing PHY devices. + +config PHYCONTROL + bool "Support for automatically handling PHY state changes" + depends on PHYLIB + help + Adds code to perform all the work for keeping PHY link + state (speed/duplex/etc) up-to-date. Also handles + interrupts. + +comment "MII PHY device drivers" + depends on PHYLIB + +config MARVELL_PHY + bool "Drivers for Marvell PHYs" + depends on PHYLIB + ---help--- + Currently has a driver for the 88E1011S + +config DAVICOM_PHY + bool "Drivers for Davicom PHYs" + depends on PHYLIB + ---help--- + Currently supports dm9161e and dm9131 + +config QSEMI_PHY + bool "Drivers for Quality Semiconductor PHYs" + depends on PHYLIB + ---help--- + Currently supports the qs6612 + +config LXT_PHY + bool "Drivers for the Intel LXT PHYs" + depends on PHYLIB + ---help--- + Currently supports the lxt970, lxt971 + +config CICADA_PHY + bool "Drivers for the Cicada PHYs" + depends on PHYLIB + ---help--- + Currently supports the cis8204 + +endmenu + diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile new file mode 100644 index 000000000000..1af05de6ced0 --- /dev/null +++ b/drivers/net/phy/Makefile @@ -0,0 +1,9 @@ +# Makefile for Linux PHY drivers + +obj-$(CONFIG_PHYLIB) += phy.o phy_device.o mdio_bus.o + +obj-$(CONFIG_MARVELL_PHY) += marvell.o +obj-$(CONFIG_DAVICOM_PHY) += davicom.o +obj-$(CONFIG_CICADA_PHY) += cicada.o +obj-$(CONFIG_LXT_PHY) += lxt.o +obj-$(CONFIG_QSEMI_PHY) += qsemi.o diff --git a/drivers/net/phy/cicada.c b/drivers/net/phy/cicada.c new file mode 100644 index 000000000000..c47fb2ecd147 --- /dev/null +++ b/drivers/net/phy/cicada.c @@ -0,0 +1,134 @@ +/* + * drivers/net/phy/cicada.c + * + * Driver for Cicada PHYs + * + * Author: Andy Fleming + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* Cicada Extended Control Register 1 */ +#define MII_CIS8201_EXT_CON1 0x17 +#define MII_CIS8201_EXTCON1_INIT 0x0000 + +/* Cicada Interrupt Mask Register */ +#define MII_CIS8201_IMASK 0x19 +#define MII_CIS8201_IMASK_IEN 0x8000 +#define MII_CIS8201_IMASK_SPEED 0x4000 +#define MII_CIS8201_IMASK_LINK 0x2000 +#define MII_CIS8201_IMASK_DUPLEX 0x1000 +#define MII_CIS8201_IMASK_MASK 0xf000 + +/* Cicada Interrupt Status Register */ +#define MII_CIS8201_ISTAT 0x1a +#define MII_CIS8201_ISTAT_STATUS 0x8000 +#define MII_CIS8201_ISTAT_SPEED 0x4000 +#define MII_CIS8201_ISTAT_LINK 0x2000 +#define MII_CIS8201_ISTAT_DUPLEX 0x1000 + +/* Cicada Auxiliary Control/Status Register */ +#define MII_CIS8201_AUX_CONSTAT 0x1c +#define MII_CIS8201_AUXCONSTAT_INIT 0x0004 +#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020 +#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018 +#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010 +#define MII_CIS8201_AUXCONSTAT_100 0x0008 + +MODULE_DESCRIPTION("Cicadia PHY driver"); +MODULE_AUTHOR("Andy Fleming"); +MODULE_LICENSE("GPL"); + +static int cis820x_config_init(struct phy_device *phydev) +{ + int err; + + err = phy_write(phydev, MII_CIS8201_AUX_CONSTAT, + MII_CIS8201_AUXCONSTAT_INIT); + + if (err < 0) + return err; + + err = phy_write(phydev, MII_CIS8201_EXT_CON1, + MII_CIS8201_EXTCON1_INIT); + + return err; +} + +static int cis820x_ack_interrupt(struct phy_device *phydev) +{ + int err = phy_read(phydev, MII_CIS8201_ISTAT); + + return (err < 0) ? err : 0; +} + +static int cis820x_config_intr(struct phy_device *phydev) +{ + int err; + + if(phydev->interrupts == PHY_INTERRUPT_ENABLED) + err = phy_write(phydev, MII_CIS8201_IMASK, + MII_CIS8201_IMASK_MASK); + else + err = phy_write(phydev, MII_CIS8201_IMASK, 0); + + return err; +} + +/* Cicada 820x */ +static struct phy_driver cis8204_driver = { + .phy_id = 0x000fc440, + .name = "Cicada Cis8204", + .phy_id_mask = 0x000fffc0, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &cis820x_config_init, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &cis820x_ack_interrupt, + .config_intr = &cis820x_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +static int __init cis8204_init(void) +{ + return phy_driver_register(&cis8204_driver); +} + +static void __exit cis8204_exit(void) +{ + phy_driver_unregister(&cis8204_driver); +} + +module_init(cis8204_init); +module_exit(cis8204_exit); diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c new file mode 100644 index 000000000000..6caf499fae32 --- /dev/null +++ b/drivers/net/phy/davicom.c @@ -0,0 +1,195 @@ +/* + * drivers/net/phy/davicom.c + * + * Driver for Davicom PHYs + * + * Author: Andy Fleming + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define MII_DM9161_SCR 0x10 +#define MII_DM9161_SCR_INIT 0x0610 + +/* DM9161 Interrupt Register */ +#define MII_DM9161_INTR 0x15 +#define MII_DM9161_INTR_PEND 0x8000 +#define MII_DM9161_INTR_DPLX_MASK 0x0800 +#define MII_DM9161_INTR_SPD_MASK 0x0400 +#define MII_DM9161_INTR_LINK_MASK 0x0200 +#define MII_DM9161_INTR_MASK 0x0100 +#define MII_DM9161_INTR_DPLX_CHANGE 0x0010 +#define MII_DM9161_INTR_SPD_CHANGE 0x0008 +#define MII_DM9161_INTR_LINK_CHANGE 0x0004 +#define MII_DM9161_INTR_INIT 0x0000 +#define MII_DM9161_INTR_STOP \ +(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \ + | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK) + +/* DM9161 10BT Configuration/Status */ +#define MII_DM9161_10BTCSR 0x12 +#define MII_DM9161_10BTCSR_INIT 0x7800 + +MODULE_DESCRIPTION("Davicom PHY driver"); +MODULE_AUTHOR("Andy Fleming"); +MODULE_LICENSE("GPL"); + + +#define DM9161_DELAY 1 +static int dm9161_config_intr(struct phy_device *phydev) +{ + int temp; + + temp = phy_read(phydev, MII_DM9161_INTR); + + if (temp < 0) + return temp; + + if(PHY_INTERRUPT_ENABLED == phydev->interrupts ) + temp &= ~(MII_DM9161_INTR_STOP); + else + temp |= MII_DM9161_INTR_STOP; + + temp = phy_write(phydev, MII_DM9161_INTR, temp); + + return temp; +} + +static int dm9161_config_aneg(struct phy_device *phydev) +{ + int err; + + /* Isolate the PHY */ + err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE); + + if (err < 0) + return err; + + /* Configure the new settings */ + err = genphy_config_aneg(phydev); + + if (err < 0) + return err; + + return 0; +} + +static int dm9161_config_init(struct phy_device *phydev) +{ + int err; + + /* Isolate the PHY */ + err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE); + + if (err < 0) + return err; + + /* Do not bypass the scrambler/descrambler */ + err = phy_write(phydev, MII_DM9161_SCR, MII_DM9161_SCR_INIT); + + if (err < 0) + return err; + + /* Clear 10BTCSR to default */ + err = phy_write(phydev, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT); + + if (err < 0) + return err; + + /* Reconnect the PHY, and enable Autonegotiation */ + err = phy_write(phydev, MII_BMCR, BMCR_ANENABLE); + + if (err < 0) + return err; + + return 0; +} + +static int dm9161_ack_interrupt(struct phy_device *phydev) +{ + int err = phy_read(phydev, MII_DM9161_INTR); + + return (err < 0) ? err : 0; +} + +static struct phy_driver dm9161_driver = { + .phy_id = 0x0181b880, + .name = "Davicom DM9161E", + .phy_id_mask = 0x0ffffff0, + .features = PHY_BASIC_FEATURES, + .config_init = dm9161_config_init, + .config_aneg = dm9161_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE,}, +}; + +static struct phy_driver dm9131_driver = { + .phy_id = 0x00181b80, + .name = "Davicom DM9131", + .phy_id_mask = 0x0ffffff0, + .features = PHY_BASIC_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = dm9161_ack_interrupt, + .config_intr = dm9161_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +static int __init davicom_init(void) +{ + int ret; + + ret = phy_driver_register(&dm9161_driver); + if (ret) + goto err1; + + ret = phy_driver_register(&dm9131_driver); + if (ret) + goto err2; + return 0; + + err2: + phy_driver_unregister(&dm9161_driver); + err1: + return ret; +} + +static void __exit davicom_exit(void) +{ + phy_driver_unregister(&dm9161_driver); + phy_driver_unregister(&dm9131_driver); +} + +module_init(davicom_init); +module_exit(davicom_exit); diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c new file mode 100644 index 000000000000..4c840448ec86 --- /dev/null +++ b/drivers/net/phy/lxt.c @@ -0,0 +1,179 @@ +/* + * drivers/net/phy/lxt.c + * + * Driver for Intel LXT PHYs + * + * Author: Andy Fleming + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* The Level one LXT970 is used by many boards */ + +#define MII_LXT970_IER 17 /* Interrupt Enable Register */ + +#define MII_LXT970_IER_IEN 0x0002 + +#define MII_LXT970_ISR 18 /* Interrupt Status Register */ + +#define MII_LXT970_CONFIG 19 /* Configuration Register */ + +/* ------------------------------------------------------------------------- */ +/* The Level one LXT971 is used on some of my custom boards */ + +/* register definitions for the 971 */ +#define MII_LXT971_IER 18 /* Interrupt Enable Register */ +#define MII_LXT971_IER_IEN 0x00f2 + +#define MII_LXT971_ISR 19 /* Interrupt Status Register */ + + +MODULE_DESCRIPTION("Intel LXT PHY driver"); +MODULE_AUTHOR("Andy Fleming"); +MODULE_LICENSE("GPL"); + +static int lxt970_ack_interrupt(struct phy_device *phydev) +{ + int err; + + err = phy_read(phydev, MII_BMSR); + + if (err < 0) + return err; + + err = phy_read(phydev, MII_LXT970_ISR); + + if (err < 0) + return err; + + return 0; +} + +static int lxt970_config_intr(struct phy_device *phydev) +{ + int err; + + if(phydev->interrupts == PHY_INTERRUPT_ENABLED) + err = phy_write(phydev, MII_LXT970_IER, MII_LXT970_IER_IEN); + else + err = phy_write(phydev, MII_LXT970_IER, 0); + + return err; +} + +static int lxt970_config_init(struct phy_device *phydev) +{ + int err; + + err = phy_write(phydev, MII_LXT970_CONFIG, 0); + + return err; +} + + +static int lxt971_ack_interrupt(struct phy_device *phydev) +{ + int err = phy_read(phydev, MII_LXT971_ISR); + + if (err < 0) + return err; + + return 0; +} + +static int lxt971_config_intr(struct phy_device *phydev) +{ + int err; + + if(phydev->interrupts == PHY_INTERRUPT_ENABLED) + err = phy_write(phydev, MII_LXT971_IER, MII_LXT971_IER_IEN); + else + err = phy_write(phydev, MII_LXT971_IER, 0); + + return err; +} + +static struct phy_driver lxt970_driver = { + .phy_id = 0x07810000, + .name = "LXT970", + .phy_id_mask = 0x0fffffff, + .features = PHY_BASIC_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = lxt970_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = lxt970_ack_interrupt, + .config_intr = lxt970_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +static struct phy_driver lxt971_driver = { + .phy_id = 0x0001378e, + .name = "LXT971", + .phy_id_mask = 0x0fffffff, + .features = PHY_BASIC_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = lxt971_ack_interrupt, + .config_intr = lxt971_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +static int __init lxt_init(void) +{ + int ret; + + ret = phy_driver_register(&lxt970_driver); + if (ret) + goto err1; + + ret = phy_driver_register(&lxt971_driver); + if (ret) + goto err2; + return 0; + + err2: + phy_driver_unregister(&lxt970_driver); + err1: + return ret; +} + +static void __exit lxt_exit(void) +{ + phy_driver_unregister(&lxt970_driver); + phy_driver_unregister(&lxt971_driver); +} + +module_init(lxt_init); +module_exit(lxt_exit); diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c new file mode 100644 index 000000000000..4a72b025006b --- /dev/null +++ b/drivers/net/phy/marvell.c @@ -0,0 +1,140 @@ +/* + * drivers/net/phy/marvell.c + * + * Driver for Marvell PHYs + * + * Author: Andy Fleming + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define MII_M1011_IEVENT 0x13 +#define MII_M1011_IEVENT_CLEAR 0x0000 + +#define MII_M1011_IMASK 0x12 +#define MII_M1011_IMASK_INIT 0x6400 +#define MII_M1011_IMASK_CLEAR 0x0000 + +MODULE_DESCRIPTION("Marvell PHY driver"); +MODULE_AUTHOR("Andy Fleming"); +MODULE_LICENSE("GPL"); + +static int marvell_ack_interrupt(struct phy_device *phydev) +{ + int err; + + /* Clear the interrupts by reading the reg */ + err = phy_read(phydev, MII_M1011_IEVENT); + + if (err < 0) + return err; + + return 0; +} + +static int marvell_config_intr(struct phy_device *phydev) +{ + int err; + + if(phydev->interrupts == PHY_INTERRUPT_ENABLED) + err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT); + else + err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); + + return err; +} + +static int marvell_config_aneg(struct phy_device *phydev) +{ + int err; + + /* The Marvell PHY has an errata which requires + * that certain registers get written in order + * to restart autonegotiation */ + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + + if (err < 0) + return err; + + err = phy_write(phydev, 0x1d, 0x1f); + if (err < 0) + return err; + + err = phy_write(phydev, 0x1e, 0x200c); + if (err < 0) + return err; + + err = phy_write(phydev, 0x1d, 0x5); + if (err < 0) + return err; + + err = phy_write(phydev, 0x1e, 0); + if (err < 0) + return err; + + err = phy_write(phydev, 0x1e, 0x100); + if (err < 0) + return err; + + + err = genphy_config_aneg(phydev); + + return err; +} + + +static struct phy_driver m88e1101_driver = { + .phy_id = 0x01410c00, + .phy_id_mask = 0xffffff00, + .name = "Marvell 88E1101", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &marvell_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +static int __init marvell_init(void) +{ + return phy_driver_register(&m88e1101_driver); +} + +static void __exit marvell_exit(void) +{ + phy_driver_unregister(&m88e1101_driver); +} + +module_init(marvell_init); +module_exit(marvell_exit); diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c new file mode 100644 index 000000000000..e75103ba6f86 --- /dev/null +++ b/drivers/net/phy/mdio_bus.c @@ -0,0 +1,173 @@ +/* + * drivers/net/phy/mdio_bus.c + * + * MDIO Bus interface + * + * Author: Andy Fleming + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* mdiobus_register + * + * description: Called by a bus driver to bring up all the PHYs + * on a given bus, and attach them to the bus + */ +int mdiobus_register(struct mii_bus *bus) +{ + int i; + int err = 0; + + spin_lock_init(&bus->mdio_lock); + + if (NULL == bus || NULL == bus->name || + NULL == bus->read || + NULL == bus->write) + return -EINVAL; + + if (bus->reset) + bus->reset(bus); + + for (i = 0; i < PHY_MAX_ADDR; i++) { + struct phy_device *phydev; + + phydev = get_phy_device(bus, i); + + if (IS_ERR(phydev)) + return PTR_ERR(phydev); + + /* There's a PHY at this address + * We need to set: + * 1) IRQ + * 2) bus_id + * 3) parent + * 4) bus + * 5) mii_bus + * And, we need to register it */ + if (phydev) { + phydev->irq = bus->irq[i]; + + phydev->dev.parent = bus->dev; + phydev->dev.bus = &mdio_bus_type; + sprintf(phydev->dev.bus_id, "phy%d:%d", bus->id, i); + + phydev->bus = bus; + + err = device_register(&phydev->dev); + + if (err) + printk(KERN_ERR "phy %d failed to register\n", + i); + } + + bus->phy_map[i] = phydev; + } + + pr_info("%s: probed\n", bus->name); + + return err; +} +EXPORT_SYMBOL(mdiobus_register); + +void mdiobus_unregister(struct mii_bus *bus) +{ + int i; + + for (i = 0; i < PHY_MAX_ADDR; i++) { + if (bus->phy_map[i]) { + device_unregister(&bus->phy_map[i]->dev); + kfree(bus->phy_map[i]); + } + } +} +EXPORT_SYMBOL(mdiobus_unregister); + +/* mdio_bus_match + * + * description: Given a PHY device, and a PHY driver, return 1 if + * the driver supports the device. Otherwise, return 0 + */ +static int mdio_bus_match(struct device *dev, struct device_driver *drv) +{ + struct phy_device *phydev = to_phy_device(dev); + struct phy_driver *phydrv = to_phy_driver(drv); + + return (phydrv->phy_id == (phydev->phy_id & phydrv->phy_id_mask)); +} + +/* Suspend and resume. Copied from platform_suspend and + * platform_resume + */ +static int mdio_bus_suspend(struct device * dev, u32 state) +{ + int ret = 0; + struct device_driver *drv = dev->driver; + + if (drv && drv->suspend) { + ret = drv->suspend(dev, state, SUSPEND_DISABLE); + if (ret == 0) + ret = drv->suspend(dev, state, SUSPEND_SAVE_STATE); + if (ret == 0) + ret = drv->suspend(dev, state, SUSPEND_POWER_DOWN); + } + return ret; +} + +static int mdio_bus_resume(struct device * dev) +{ + int ret = 0; + struct device_driver *drv = dev->driver; + + if (drv && drv->resume) { + ret = drv->resume(dev, RESUME_POWER_ON); + if (ret == 0) + ret = drv->resume(dev, RESUME_RESTORE_STATE); + if (ret == 0) + ret = drv->resume(dev, RESUME_ENABLE); + } + return ret; +} + +struct bus_type mdio_bus_type = { + .name = "mdio_bus", + .match = mdio_bus_match, + .suspend = mdio_bus_suspend, + .resume = mdio_bus_resume, +}; + +static int __init mdio_bus_init(void) +{ + return bus_register(&mdio_bus_type); +} + +subsys_initcall(mdio_bus_init); diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c new file mode 100644 index 000000000000..e2c6896b92d2 --- /dev/null +++ b/drivers/net/phy/phy.c @@ -0,0 +1,862 @@ +/* + * drivers/net/phy/phy.c + * + * Framework for configuring and reading PHY devices + * Based on code in sungem_phy.c and gianfar_phy.c + * + * Author: Andy Fleming + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static void phy_change(void *data); +static void phy_timer(unsigned long data); + +/* Convenience function to print out the current phy status + */ +void phy_print_status(struct phy_device *phydev) +{ + pr_info("%s: Link is %s", phydev->dev.bus_id, + phydev->link ? "Up" : "Down"); + if (phydev->link) + printk(" - %d/%s", phydev->speed, + DUPLEX_FULL == phydev->duplex ? + "Full" : "Half"); + + printk("\n"); +} +EXPORT_SYMBOL(phy_print_status); + + +/* Convenience functions for reading/writing a given PHY + * register. They MUST NOT be called from interrupt context, + * because the bus read/write functions may wait for an interrupt + * to conclude the operation. */ +int phy_read(struct phy_device *phydev, u16 regnum) +{ + int retval; + struct mii_bus *bus = phydev->bus; + + spin_lock_bh(&bus->mdio_lock); + retval = bus->read(bus, phydev->addr, regnum); + spin_unlock_bh(&bus->mdio_lock); + + return retval; +} +EXPORT_SYMBOL(phy_read); + +int phy_write(struct phy_device *phydev, u16 regnum, u16 val) +{ + int err; + struct mii_bus *bus = phydev->bus; + + spin_lock_bh(&bus->mdio_lock); + err = bus->write(bus, phydev->addr, regnum, val); + spin_unlock_bh(&bus->mdio_lock); + + return err; +} +EXPORT_SYMBOL(phy_write); + + +int phy_clear_interrupt(struct phy_device *phydev) +{ + int err = 0; + + if (phydev->drv->ack_interrupt) + err = phydev->drv->ack_interrupt(phydev); + + return err; +} + + +int phy_config_interrupt(struct phy_device *phydev, u32 interrupts) +{ + int err = 0; + + phydev->interrupts = interrupts; + if (phydev->drv->config_intr) + err = phydev->drv->config_intr(phydev); + + return err; +} + + +/* phy_aneg_done + * + * description: Reads the status register and returns 0 either if + * auto-negotiation is incomplete, or if there was an error. + * Returns BMSR_ANEGCOMPLETE if auto-negotiation is done. + */ +static inline int phy_aneg_done(struct phy_device *phydev) +{ + int retval; + + retval = phy_read(phydev, MII_BMSR); + + return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE); +} + +/* phy_start_aneg + * + * description: Calls the PHY driver's config_aneg, and then + * sets the PHY state to PHY_AN if auto-negotiation is enabled, + * and to PHY_FORCING if auto-negotiation is disabled. Unless + * the PHY is currently HALTED. + */ +int phy_start_aneg(struct phy_device *phydev) +{ + int err; + + spin_lock(&phydev->lock); + + if (AUTONEG_DISABLE == phydev->autoneg) + phy_sanitize_settings(phydev); + + err = phydev->drv->config_aneg(phydev); + + if (err < 0) + goto out_unlock; + + if (phydev->state != PHY_HALTED) { + if (AUTONEG_ENABLE == phydev->autoneg) { + phydev->state = PHY_AN; + phydev->link_timeout = PHY_AN_TIMEOUT; + } else { + phydev->state = PHY_FORCING; + phydev->link_timeout = PHY_FORCE_TIMEOUT; + } + } + +out_unlock: + spin_unlock(&phydev->lock); + return err; +} +EXPORT_SYMBOL(phy_start_aneg); + + +/* A structure for mapping a particular speed and duplex + * combination to a particular SUPPORTED and ADVERTISED value */ +struct phy_setting { + int speed; + int duplex; + u32 setting; +}; + +/* A mapping of all SUPPORTED settings to speed/duplex */ +static struct phy_setting settings[] = { + { + .speed = 10000, + .duplex = DUPLEX_FULL, + .setting = SUPPORTED_10000baseT_Full, + }, + { + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, + .setting = SUPPORTED_1000baseT_Full, + }, + { + .speed = SPEED_1000, + .duplex = DUPLEX_HALF, + .setting = SUPPORTED_1000baseT_Half, + }, + { + .speed = SPEED_100, + .duplex = DUPLEX_FULL, + .setting = SUPPORTED_100baseT_Full, + }, + { + .speed = SPEED_100, + .duplex = DUPLEX_HALF, + .setting = SUPPORTED_100baseT_Half, + }, + { + .speed = SPEED_10, + .duplex = DUPLEX_FULL, + .setting = SUPPORTED_10baseT_Full, + }, + { + .speed = SPEED_10, + .duplex = DUPLEX_HALF, + .setting = SUPPORTED_10baseT_Half, + }, +}; + +#define MAX_NUM_SETTINGS (sizeof(settings)/sizeof(struct phy_setting)) + +/* phy_find_setting + * + * description: Searches the settings array for the setting which + * matches the desired speed and duplex, and returns the index + * of that setting. Returns the index of the last setting if + * none of the others match. + */ +static inline int phy_find_setting(int speed, int duplex) +{ + int idx = 0; + + while (idx < ARRAY_SIZE(settings) && + (settings[idx].speed != speed || + settings[idx].duplex != duplex)) + idx++; + + return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1; +} + +/* phy_find_valid + * idx: The first index in settings[] to search + * features: A mask of the valid settings + * + * description: Returns the index of the first valid setting less + * than or equal to the one pointed to by idx, as determined by + * the mask in features. Returns the index of the last setting + * if nothing else matches. + */ +static inline int phy_find_valid(int idx, u32 features) +{ + while (idx < MAX_NUM_SETTINGS && !(settings[idx].setting & features)) + idx++; + + return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1; +} + +/* phy_sanitize_settings + * + * description: Make sure the PHY is set to supported speeds and + * duplexes. Drop down by one in this order: 1000/FULL, + * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF + */ +void phy_sanitize_settings(struct phy_device *phydev) +{ + u32 features = phydev->supported; + int idx; + + /* Sanitize settings based on PHY capabilities */ + if ((features & SUPPORTED_Autoneg) == 0) + phydev->autoneg = 0; + + idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex), + features); + + phydev->speed = settings[idx].speed; + phydev->duplex = settings[idx].duplex; +} +EXPORT_SYMBOL(phy_sanitize_settings); + +/* phy_force_reduction + * + * description: Reduces the speed/duplex settings by + * one notch. The order is so: + * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF, + * 10/FULL, 10/HALF. The function bottoms out at 10/HALF. + */ +static void phy_force_reduction(struct phy_device *phydev) +{ + int idx; + + idx = phy_find_setting(phydev->speed, phydev->duplex); + + idx++; + + idx = phy_find_valid(idx, phydev->supported); + + phydev->speed = settings[idx].speed; + phydev->duplex = settings[idx].duplex; + + pr_info("Trying %d/%s\n", phydev->speed, + DUPLEX_FULL == phydev->duplex ? + "FULL" : "HALF"); +} + +/* phy_ethtool_sset: + * A generic ethtool sset function. Handles all the details + * + * A few notes about parameter checking: + * - We don't set port or transceiver, so we don't care what they + * were set to. + * - phy_start_aneg() will make sure forced settings are sane, and + * choose the next best ones from the ones selected, so we don't + * care if ethtool tries to give us bad values + */ +int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd) +{ + if (cmd->phy_address != phydev->addr) + return -EINVAL; + + /* We make sure that we don't pass unsupported + * values in to the PHY */ + cmd->advertising &= phydev->supported; + + /* Verify the settings we care about. */ + if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE) + return -EINVAL; + + if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0) + return -EINVAL; + + if (cmd->autoneg == AUTONEG_DISABLE + && ((cmd->speed != SPEED_1000 + && cmd->speed != SPEED_100 + && cmd->speed != SPEED_10) + || (cmd->duplex != DUPLEX_HALF + && cmd->duplex != DUPLEX_FULL))) + return -EINVAL; + + phydev->autoneg = cmd->autoneg; + + phydev->speed = cmd->speed; + + phydev->advertising = cmd->advertising; + + if (AUTONEG_ENABLE == cmd->autoneg) + phydev->advertising |= ADVERTISED_Autoneg; + else + phydev->advertising &= ~ADVERTISED_Autoneg; + + phydev->duplex = cmd->duplex; + + /* Restart the PHY */ + phy_start_aneg(phydev); + + return 0; +} + +int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd) +{ + cmd->supported = phydev->supported; + + cmd->advertising = phydev->advertising; + + cmd->speed = phydev->speed; + cmd->duplex = phydev->duplex; + cmd->port = PORT_MII; + cmd->phy_address = phydev->addr; + cmd->transceiver = XCVR_EXTERNAL; + cmd->autoneg = phydev->autoneg; + + return 0; +} + + +/* Note that this function is currently incompatible with the + * PHYCONTROL layer. It changes registers without regard to + * current state. Use at own risk + */ +int phy_mii_ioctl(struct phy_device *phydev, + struct mii_ioctl_data *mii_data, int cmd) +{ + u16 val = mii_data->val_in; + + switch (cmd) { + case SIOCGMIIPHY: + mii_data->phy_id = phydev->addr; + break; + case SIOCGMIIREG: + mii_data->val_out = phy_read(phydev, mii_data->reg_num); + break; + + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + if (mii_data->phy_id == phydev->addr) { + switch(mii_data->reg_num) { + case MII_BMCR: + if (val & (BMCR_RESET|BMCR_ANENABLE)) + phydev->autoneg = AUTONEG_DISABLE; + else + phydev->autoneg = AUTONEG_ENABLE; + if ((!phydev->autoneg) && (val & BMCR_FULLDPLX)) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + break; + case MII_ADVERTISE: + phydev->advertising = val; + break; + default: + /* do nothing */ + break; + } + } + + phy_write(phydev, mii_data->reg_num, val); + + if (mii_data->reg_num == MII_BMCR + && val & BMCR_RESET + && phydev->drv->config_init) + phydev->drv->config_init(phydev); + break; + } + + return 0; +} + +/* phy_start_machine: + * + * description: The PHY infrastructure can run a state machine + * which tracks whether the PHY is starting up, negotiating, + * etc. This function starts the timer which tracks the state + * of the PHY. If you want to be notified when the state + * changes, pass in the callback, otherwise, pass NULL. If you + * want to maintain your own state machine, do not call this + * function. */ +void phy_start_machine(struct phy_device *phydev, + void (*handler)(struct net_device *)) +{ + phydev->adjust_state = handler; + + init_timer(&phydev->phy_timer); + phydev->phy_timer.function = &phy_timer; + phydev->phy_timer.data = (unsigned long) phydev; + mod_timer(&phydev->phy_timer, jiffies + HZ); +} + +/* phy_stop_machine + * + * description: Stops the state machine timer, sets the state to + * UP (unless it wasn't up yet), and then frees the interrupt, + * if it is in use. This function must be called BEFORE + * phy_detach. + */ +void phy_stop_machine(struct phy_device *phydev) +{ + del_timer_sync(&phydev->phy_timer); + + spin_lock(&phydev->lock); + if (phydev->state > PHY_UP) + phydev->state = PHY_UP; + spin_unlock(&phydev->lock); + + if (phydev->irq != PHY_POLL) + phy_stop_interrupts(phydev); + + phydev->adjust_state = NULL; +} + +#ifdef CONFIG_PHYCONTROL +/* phy_error: + * + * Moves the PHY to the HALTED state in response to a read + * or write error, and tells the controller the link is down. + * Must not be called from interrupt context, or while the + * phydev->lock is held. + */ +void phy_error(struct phy_device *phydev) +{ + spin_lock(&phydev->lock); + phydev->state = PHY_HALTED; + spin_unlock(&phydev->lock); +} + +/* phy_interrupt + * + * description: When a PHY interrupt occurs, the handler disables + * interrupts, and schedules a work task to clear the interrupt. + */ +static irqreturn_t phy_interrupt(int irq, void *phy_dat, struct pt_regs *regs) +{ + struct phy_device *phydev = phy_dat; + + /* The MDIO bus is not allowed to be written in interrupt + * context, so we need to disable the irq here. A work + * queue will write the PHY to disable and clear the + * interrupt, and then reenable the irq line. */ + disable_irq_nosync(irq); + + schedule_work(&phydev->phy_queue); + + return IRQ_HANDLED; +} + +/* Enable the interrupts from the PHY side */ +int phy_enable_interrupts(struct phy_device *phydev) +{ + int err; + + err = phy_clear_interrupt(phydev); + + if (err < 0) + return err; + + err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); + + return err; +} +EXPORT_SYMBOL(phy_enable_interrupts); + +/* Disable the PHY interrupts from the PHY side */ +int phy_disable_interrupts(struct phy_device *phydev) +{ + int err; + + /* Disable PHY interrupts */ + err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); + + if (err) + goto phy_err; + + /* Clear the interrupt */ + err = phy_clear_interrupt(phydev); + + if (err) + goto phy_err; + + return 0; + +phy_err: + phy_error(phydev); + + return err; +} +EXPORT_SYMBOL(phy_disable_interrupts); + +/* phy_start_interrupts + * + * description: Request the interrupt for the given PHY. If + * this fails, then we set irq to PHY_POLL. + * Otherwise, we enable the interrupts in the PHY. + * Returns 0 on success. + * This should only be called with a valid IRQ number. + */ +int phy_start_interrupts(struct phy_device *phydev) +{ + int err = 0; + + INIT_WORK(&phydev->phy_queue, phy_change, phydev); + + if (request_irq(phydev->irq, phy_interrupt, + SA_SHIRQ, + "phy_interrupt", + phydev) < 0) { + printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n", + phydev->bus->name, + phydev->irq); + phydev->irq = PHY_POLL; + return 0; + } + + err = phy_enable_interrupts(phydev); + + return err; +} +EXPORT_SYMBOL(phy_start_interrupts); + +int phy_stop_interrupts(struct phy_device *phydev) +{ + int err; + + err = phy_disable_interrupts(phydev); + + if (err) + phy_error(phydev); + + free_irq(phydev->irq, phydev); + + return err; +} +EXPORT_SYMBOL(phy_stop_interrupts); + + +/* Scheduled by the phy_interrupt/timer to handle PHY changes */ +static void phy_change(void *data) +{ + int err; + struct phy_device *phydev = data; + + err = phy_disable_interrupts(phydev); + + if (err) + goto phy_err; + + spin_lock(&phydev->lock); + if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state)) + phydev->state = PHY_CHANGELINK; + spin_unlock(&phydev->lock); + + enable_irq(phydev->irq); + + /* Reenable interrupts */ + err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); + + if (err) + goto irq_enable_err; + + return; + +irq_enable_err: + disable_irq(phydev->irq); +phy_err: + phy_error(phydev); +} + +/* Bring down the PHY link, and stop checking the status. */ +void phy_stop(struct phy_device *phydev) +{ + spin_lock(&phydev->lock); + + if (PHY_HALTED == phydev->state) + goto out_unlock; + + if (phydev->irq != PHY_POLL) { + /* Clear any pending interrupts */ + phy_clear_interrupt(phydev); + + /* Disable PHY Interrupts */ + phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); + } + + phydev->state = PHY_HALTED; + +out_unlock: + spin_unlock(&phydev->lock); +} + + +/* phy_start + * + * description: Indicates the attached device's readiness to + * handle PHY-related work. Used during startup to start the + * PHY, and after a call to phy_stop() to resume operation. + * Also used to indicate the MDIO bus has cleared an error + * condition. + */ +void phy_start(struct phy_device *phydev) +{ + spin_lock(&phydev->lock); + + switch (phydev->state) { + case PHY_STARTING: + phydev->state = PHY_PENDING; + break; + case PHY_READY: + phydev->state = PHY_UP; + break; + case PHY_HALTED: + phydev->state = PHY_RESUMING; + default: + break; + } + spin_unlock(&phydev->lock); +} +EXPORT_SYMBOL(phy_stop); +EXPORT_SYMBOL(phy_start); + +/* PHY timer which handles the state machine */ +static void phy_timer(unsigned long data) +{ + struct phy_device *phydev = (struct phy_device *)data; + int needs_aneg = 0; + int err = 0; + + spin_lock(&phydev->lock); + + if (phydev->adjust_state) + phydev->adjust_state(phydev->attached_dev); + + switch(phydev->state) { + case PHY_DOWN: + case PHY_STARTING: + case PHY_READY: + case PHY_PENDING: + break; + case PHY_UP: + needs_aneg = 1; + + phydev->link_timeout = PHY_AN_TIMEOUT; + + break; + case PHY_AN: + /* Check if negotiation is done. Break + * if there's an error */ + err = phy_aneg_done(phydev); + if (err < 0) + break; + + /* If auto-negotiation is done, we change to + * either RUNNING, or NOLINK */ + if (err > 0) { + err = phy_read_status(phydev); + + if (err) + break; + + if (phydev->link) { + phydev->state = PHY_RUNNING; + netif_carrier_on(phydev->attached_dev); + } else { + phydev->state = PHY_NOLINK; + netif_carrier_off(phydev->attached_dev); + } + + phydev->adjust_link(phydev->attached_dev); + + } else if (0 == phydev->link_timeout--) { + /* The counter expired, so either we + * switch to forced mode, or the + * magic_aneg bit exists, and we try aneg + * again */ + if (!(phydev->drv->flags & PHY_HAS_MAGICANEG)) { + int idx; + + /* We'll start from the + * fastest speed, and work + * our way down */ + idx = phy_find_valid(0, + phydev->supported); + + phydev->speed = settings[idx].speed; + phydev->duplex = settings[idx].duplex; + + phydev->autoneg = AUTONEG_DISABLE; + phydev->state = PHY_FORCING; + phydev->link_timeout = + PHY_FORCE_TIMEOUT; + + pr_info("Trying %d/%s\n", + phydev->speed, + DUPLEX_FULL == + phydev->duplex ? + "FULL" : "HALF"); + } + + needs_aneg = 1; + } + break; + case PHY_NOLINK: + err = phy_read_status(phydev); + + if (err) + break; + + if (phydev->link) { + phydev->state = PHY_RUNNING; + netif_carrier_on(phydev->attached_dev); + phydev->adjust_link(phydev->attached_dev); + } + break; + case PHY_FORCING: + err = phy_read_status(phydev); + + if (err) + break; + + if (phydev->link) { + phydev->state = PHY_RUNNING; + netif_carrier_on(phydev->attached_dev); + } else { + if (0 == phydev->link_timeout--) { + phy_force_reduction(phydev); + needs_aneg = 1; + } + } + + phydev->adjust_link(phydev->attached_dev); + break; + case PHY_RUNNING: + /* Only register a CHANGE if we are + * polling */ + if (PHY_POLL == phydev->irq) + phydev->state = PHY_CHANGELINK; + break; + case PHY_CHANGELINK: + err = phy_read_status(phydev); + + if (err) + break; + + if (phydev->link) { + phydev->state = PHY_RUNNING; + netif_carrier_on(phydev->attached_dev); + } else { + phydev->state = PHY_NOLINK; + netif_carrier_off(phydev->attached_dev); + } + + phydev->adjust_link(phydev->attached_dev); + + if (PHY_POLL != phydev->irq) + err = phy_config_interrupt(phydev, + PHY_INTERRUPT_ENABLED); + break; + case PHY_HALTED: + if (phydev->link) { + phydev->link = 0; + netif_carrier_off(phydev->attached_dev); + phydev->adjust_link(phydev->attached_dev); + } + break; + case PHY_RESUMING: + + err = phy_clear_interrupt(phydev); + + if (err) + break; + + err = phy_config_interrupt(phydev, + PHY_INTERRUPT_ENABLED); + + if (err) + break; + + if (AUTONEG_ENABLE == phydev->autoneg) { + err = phy_aneg_done(phydev); + if (err < 0) + break; + + /* err > 0 if AN is done. + * Otherwise, it's 0, and we're + * still waiting for AN */ + if (err > 0) { + phydev->state = PHY_RUNNING; + } else { + phydev->state = PHY_AN; + phydev->link_timeout = PHY_AN_TIMEOUT; + } + } else + phydev->state = PHY_RUNNING; + break; + } + + spin_unlock(&phydev->lock); + + if (needs_aneg) + err = phy_start_aneg(phydev); + + if (err < 0) + phy_error(phydev); + + mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ); +} + +#endif /* CONFIG_PHYCONTROL */ diff --git a/drivers/net/phy/phy.c.orig b/drivers/net/phy/phy.c.orig new file mode 100644 index 000000000000..6af17cec9ace --- /dev/null +++ b/drivers/net/phy/phy.c.orig @@ -0,0 +1,860 @@ +/* + * drivers/net/phy/phy.c + * + * Framework for configuring and reading PHY devices + * Based on code in sungem_phy.c and gianfar_phy.c + * + * Author: Andy Fleming + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static void phy_change(void *data); +static void phy_timer(unsigned long data); + +/* Convenience function to print out the current phy status + */ +void phy_print_status(struct phy_device *phydev) +{ + pr_info("%s: Link is %s", phydev->dev.bus_id, + phydev->link ? "Up" : "Down"); + if (phydev->link) + printk(" - %d/%s", phydev->speed, + DUPLEX_FULL == phydev->duplex ? + "Full" : "Half"); + + printk("\n"); +} +EXPORT_SYMBOL(phy_print_status); + + +/* Convenience functions for reading/writing a given PHY + * register. They MUST NOT be called from interrupt context, + * because the bus read/write functions may wait for an interrupt + * to conclude the operation. */ +int phy_read(struct phy_device *phydev, u16 regnum) +{ + int retval; + struct mii_bus *bus = phydev->bus; + + spin_lock_bh(&bus->mdio_lock); + retval = bus->read(bus, phydev->addr, regnum); + spin_unlock_bh(&bus->mdio_lock); + + return retval; +} +EXPORT_SYMBOL(phy_read); + +int phy_write(struct phy_device *phydev, u16 regnum, u16 val) +{ + int err; + struct mii_bus *bus = phydev->bus; + + spin_lock_bh(&bus->mdio_lock); + err = bus->write(bus, phydev->addr, regnum, val); + spin_unlock_bh(&bus->mdio_lock); + + return err; +} +EXPORT_SYMBOL(phy_write); + + +int phy_clear_interrupt(struct phy_device *phydev) +{ + int err = 0; + + if (phydev->drv->ack_interrupt) + err = phydev->drv->ack_interrupt(phydev); + + return err; +} + + +int phy_config_interrupt(struct phy_device *phydev, u32 interrupts) +{ + int err = 0; + + phydev->interrupts = interrupts; + if (phydev->drv->config_intr) + err = phydev->drv->config_intr(phydev); + + return err; +} + + +/* phy_aneg_done + * + * description: Reads the status register and returns 0 either if + * auto-negotiation is incomplete, or if there was an error. + * Returns BMSR_ANEGCOMPLETE if auto-negotiation is done. + */ +static inline int phy_aneg_done(struct phy_device *phydev) +{ + int retval; + + retval = phy_read(phydev, MII_BMSR); + + return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE); +} + +/* phy_start_aneg + * + * description: Calls the PHY driver's config_aneg, and then + * sets the PHY state to PHY_AN if auto-negotiation is enabled, + * and to PHY_FORCING if auto-negotiation is disabled. Unless + * the PHY is currently HALTED. + */ +int phy_start_aneg(struct phy_device *phydev) +{ + int err; + + spin_lock(&phydev->lock); + + if (AUTONEG_DISABLE == phydev->autoneg) + phy_sanitize_settings(phydev); + + err = phydev->drv->config_aneg(phydev); + + if (err < 0) + goto out_unlock; + + if (phydev->state != PHY_HALTED) { + if (AUTONEG_ENABLE == phydev->autoneg) { + phydev->state = PHY_AN; + phydev->link_timeout = PHY_AN_TIMEOUT; + } else { + phydev->state = PHY_FORCING; + phydev->link_timeout = PHY_FORCE_TIMEOUT; + } + } + +out_unlock: + spin_unlock(&phydev->lock); + return err; +} +EXPORT_SYMBOL(phy_start_aneg); + + +/* A structure for mapping a particular speed and duplex + * combination to a particular SUPPORTED and ADVERTISED value */ +struct phy_setting { + int speed; + int duplex; + u32 setting; +}; + +/* A mapping of all SUPPORTED settings to speed/duplex */ +static struct phy_setting settings[] = { + { + .speed = 10000, + .duplex = DUPLEX_FULL, + .setting = SUPPORTED_10000baseT_Full, + }, + { + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, + .setting = SUPPORTED_1000baseT_Full, + }, + { + .speed = SPEED_1000, + .duplex = DUPLEX_HALF, + .setting = SUPPORTED_1000baseT_Half, + }, + { + .speed = SPEED_100, + .duplex = DUPLEX_FULL, + .setting = SUPPORTED_100baseT_Full, + }, + { + .speed = SPEED_100, + .duplex = DUPLEX_HALF, + .setting = SUPPORTED_100baseT_Half, + }, + { + .speed = SPEED_10, + .duplex = DUPLEX_FULL, + .setting = SUPPORTED_10baseT_Full, + }, + { + .speed = SPEED_10, + .duplex = DUPLEX_HALF, + .setting = SUPPORTED_10baseT_Half, + }, +}; + +#define MAX_NUM_SETTINGS (sizeof(settings)/sizeof(struct phy_setting)) + +/* phy_find_setting + * + * description: Searches the settings array for the setting which + * matches the desired speed and duplex, and returns the index + * of that setting. Returns the index of the last setting if + * none of the others match. + */ +static inline int phy_find_setting(int speed, int duplex) +{ + int idx = 0; + + while (idx < ARRAY_SIZE(settings) && + (settings[idx].speed != speed || + settings[idx].duplex != duplex)) + idx++; + + return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1; +} + +/* phy_find_valid + * idx: The first index in settings[] to search + * features: A mask of the valid settings + * + * description: Returns the index of the first valid setting less + * than or equal to the one pointed to by idx, as determined by + * the mask in features. Returns the index of the last setting + * if nothing else matches. + */ +static inline int phy_find_valid(int idx, u32 features) +{ + while (idx < MAX_NUM_SETTINGS && !(settings[idx].setting & features)) + idx++; + + return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1; +} + +/* phy_sanitize_settings + * + * description: Make sure the PHY is set to supported speeds and + * duplexes. Drop down by one in this order: 1000/FULL, + * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF + */ +void phy_sanitize_settings(struct phy_device *phydev) +{ + u32 features = phydev->supported; + int idx; + + /* Sanitize settings based on PHY capabilities */ + if ((features & SUPPORTED_Autoneg) == 0) + phydev->autoneg = 0; + + idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex), + features); + + phydev->speed = settings[idx].speed; + phydev->duplex = settings[idx].duplex; +} +EXPORT_SYMBOL(phy_sanitize_settings); + +/* phy_force_reduction + * + * description: Reduces the speed/duplex settings by + * one notch. The order is so: + * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF, + * 10/FULL, 10/HALF. The function bottoms out at 10/HALF. + */ +static void phy_force_reduction(struct phy_device *phydev) +{ + int idx; + + idx = phy_find_setting(phydev->speed, phydev->duplex); + + idx++; + + idx = phy_find_valid(idx, phydev->supported); + + phydev->speed = settings[idx].speed; + phydev->duplex = settings[idx].duplex; + + pr_info("Trying %d/%s\n", phydev->speed, + DUPLEX_FULL == phydev->duplex ? + "FULL" : "HALF"); +} + +/* phy_ethtool_sset: + * A generic ethtool sset function. Handles all the details + * + * A few notes about parameter checking: + * - We don't set port or transceiver, so we don't care what they + * were set to. + * - phy_start_aneg() will make sure forced settings are sane, and + * choose the next best ones from the ones selected, so we don't + * care if ethtool tries to give us bad values + */ +int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd) +{ + if (cmd->phy_address != phydev->addr) + return -EINVAL; + + /* We make sure that we don't pass unsupported + * values in to the PHY */ + cmd->advertising &= phydev->supported; + + /* Verify the settings we care about. */ + if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE) + return -EINVAL; + + if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0) + return -EINVAL; + + if (cmd->autoneg == AUTONEG_DISABLE + && ((cmd->speed != SPEED_1000 + && cmd->speed != SPEED_100 + && cmd->speed != SPEED_10) + || (cmd->duplex != DUPLEX_HALF + && cmd->duplex != DUPLEX_FULL))) + return -EINVAL; + + phydev->autoneg = cmd->autoneg; + + phydev->speed = cmd->speed; + + phydev->advertising = cmd->advertising; + + if (AUTONEG_ENABLE == cmd->autoneg) + phydev->advertising |= ADVERTISED_Autoneg; + else + phydev->advertising &= ~ADVERTISED_Autoneg; + + phydev->duplex = cmd->duplex; + + /* Restart the PHY */ + phy_start_aneg(phydev); + + return 0; +} + +int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd) +{ + cmd->supported = phydev->supported; + + cmd->advertising = phydev->advertising; + + cmd->speed = phydev->speed; + cmd->duplex = phydev->duplex; + cmd->port = PORT_MII; + cmd->phy_address = phydev->addr; + cmd->transceiver = XCVR_EXTERNAL; + cmd->autoneg = phydev->autoneg; + + return 0; +} + + +/* Note that this function is currently incompatible with the + * PHYCONTROL layer. It changes registers without regard to + * current state. Use at own risk + */ +int phy_mii_ioctl(struct phy_device *phydev, + struct mii_ioctl_data *mii_data, int cmd) +{ + u16 val = mii_data->val_in; + + switch (cmd) { + case SIOCGMIIPHY: + mii_data->phy_id = phydev->addr; + break; + case SIOCGMIIREG: + mii_data->val_out = phy_read(phydev, mii_data->reg_num); + break; + + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + if (mii_data->phy_id == phydev->addr) { + switch(mii_data->reg_num) { + case MII_BMCR: + if (val & (BMCR_RESET|BMCR_ANENABLE)) + phydev->autoneg = AUTONEG_DISABLE; + else + phydev->autoneg = AUTONEG_ENABLE; + if ((!phydev->autoneg) && (val & BMCR_FULLDPLX)) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + break; + case MII_ADVERTISE: + phydev->advertising = val; + break; + default: + /* do nothing */ + break; + } + } + + phy_write(phydev, mii_data->reg_num, val); + + if (mii_data->reg_num == MII_BMCR + && val & BMCR_RESET + && phydev->drv->config_init) + phydev->drv->config_init(phydev); + break; + } + + return 0; +} + +/* phy_start_machine: + * + * description: The PHY infrastructure can run a state machine + * which tracks whether the PHY is starting up, negotiating, + * etc. This function starts the timer which tracks the state + * of the PHY. If you want to be notified when the state + * changes, pass in the callback, otherwise, pass NULL. If you + * want to maintain your own state machine, do not call this + * function. */ +void phy_start_machine(struct phy_device *phydev, + void (*handler)(struct net_device *)) +{ + phydev->adjust_state = handler; + + init_timer(&phydev->phy_timer); + phydev->phy_timer.function = &phy_timer; + phydev->phy_timer.data = (unsigned long) phydev; + mod_timer(&phydev->phy_timer, jiffies + HZ); +} + +/* phy_stop_machine + * + * description: Stops the state machine timer, sets the state to + * UP (unless it wasn't up yet), and then frees the interrupt, + * if it is in use. This function must be called BEFORE + * phy_detach. + */ +void phy_stop_machine(struct phy_device *phydev) +{ + del_timer_sync(&phydev->phy_timer); + + spin_lock(&phydev->lock); + if (phydev->state > PHY_UP) + phydev->state = PHY_UP; + spin_unlock(&phydev->lock); + + if (phydev->irq != PHY_POLL) + phy_stop_interrupts(phydev); + + phydev->adjust_state = NULL; +} + +#ifdef CONFIG_PHYCONTROL +/* phy_error: + * + * Moves the PHY to the HALTED state in response to a read + * or write error, and tells the controller the link is down. + * Must not be called from interrupt context, or while the + * phydev->lock is held. + */ +void phy_error(struct phy_device *phydev) +{ + spin_lock(&phydev->lock); + phydev->state = PHY_HALTED; + spin_unlock(&phydev->lock); +} + +/* phy_interrupt + * + * description: When a PHY interrupt occurs, the handler disables + * interrupts, and schedules a work task to clear the interrupt. + */ +static irqreturn_t phy_interrupt(int irq, void *phy_dat, struct pt_regs *regs) +{ + struct phy_device *phydev = phy_dat; + + /* The MDIO bus is not allowed to be written in interrupt + * context, so we need to disable the irq here. A work + * queue will write the PHY to disable and clear the + * interrupt, and then reenable the irq line. */ + disable_irq_nosync(irq); + + schedule_work(&phydev->phy_queue); + + return IRQ_HANDLED; +} + +/* Enable the interrupts from the PHY side */ +int phy_enable_interrupts(struct phy_device *phydev) +{ + int err; + + err = phy_clear_interrupt(phydev); + + if (err < 0) + return err; + + err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); + + return err; +} + +/* Disable the PHY interrupts from the PHY side */ +int phy_disable_interrupts(struct phy_device *phydev) +{ + int err; + + /* Disable PHY interrupts */ + err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); + + if (err) + goto phy_err; + + /* Clear the interrupt */ + err = phy_clear_interrupt(phydev); + + if (err) + goto phy_err; + + return 0; + +phy_err: + phy_error(phydev); + + return err; +} + +/* phy_start_interrupts + * + * description: Request the interrupt for the given PHY. If + * this fails, then we set irq to PHY_POLL. + * Otherwise, we enable the interrupts in the PHY. + * Returns 0 on success. + * This should only be called with a valid IRQ number. + */ +int phy_start_interrupts(struct phy_device *phydev) +{ + int err = 0; + + INIT_WORK(&phydev->phy_queue, phy_change, phydev); + + if (request_irq(phydev->irq, phy_interrupt, + SA_SHIRQ, + "phy_interrupt", + phydev) < 0) { + printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n", + phydev->bus->name, + phydev->irq); + phydev->irq = PHY_POLL; + return 0; + } + + err = phy_enable_interrupts(phydev); + + return err; +} +EXPORT_SYMBOL(phy_start_interrupts); + +int phy_stop_interrupts(struct phy_device *phydev) +{ + int err; + + err = phy_disable_interrupts(phydev); + + if (err) + phy_error(phydev); + + free_irq(phydev->irq, phydev); + + return err; +} +EXPORT_SYMBOL(phy_stop_interrupts); + + +/* Scheduled by the phy_interrupt/timer to handle PHY changes */ +static void phy_change(void *data) +{ + int err; + struct phy_device *phydev = data; + + err = phy_disable_interrupts(phydev); + + if (err) + goto phy_err; + + spin_lock(&phydev->lock); + if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state)) + phydev->state = PHY_CHANGELINK; + spin_unlock(&phydev->lock); + + enable_irq(phydev->irq); + + /* Reenable interrupts */ + err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); + + if (err) + goto irq_enable_err; + + return; + +irq_enable_err: + disable_irq(phydev->irq); +phy_err: + phy_error(phydev); +} + +/* Bring down the PHY link, and stop checking the status. */ +void phy_stop(struct phy_device *phydev) +{ + spin_lock(&phydev->lock); + + if (PHY_HALTED == phydev->state) + goto out_unlock; + + if (phydev->irq != PHY_POLL) { + /* Clear any pending interrupts */ + phy_clear_interrupt(phydev); + + /* Disable PHY Interrupts */ + phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); + } + + phydev->state = PHY_HALTED; + +out_unlock: + spin_unlock(&phydev->lock); +} + + +/* phy_start + * + * description: Indicates the attached device's readiness to + * handle PHY-related work. Used during startup to start the + * PHY, and after a call to phy_stop() to resume operation. + * Also used to indicate the MDIO bus has cleared an error + * condition. + */ +void phy_start(struct phy_device *phydev) +{ + spin_lock(&phydev->lock); + + switch (phydev->state) { + case PHY_STARTING: + phydev->state = PHY_PENDING; + break; + case PHY_READY: + phydev->state = PHY_UP; + break; + case PHY_HALTED: + phydev->state = PHY_RESUMING; + default: + break; + } + spin_unlock(&phydev->lock); +} +EXPORT_SYMBOL(phy_stop); +EXPORT_SYMBOL(phy_start); + +/* PHY timer which handles the state machine */ +static void phy_timer(unsigned long data) +{ + struct phy_device *phydev = (struct phy_device *)data; + int needs_aneg = 0; + int err = 0; + + spin_lock(&phydev->lock); + + if (phydev->adjust_state) + phydev->adjust_state(phydev->attached_dev); + + switch(phydev->state) { + case PHY_DOWN: + case PHY_STARTING: + case PHY_READY: + case PHY_PENDING: + break; + case PHY_UP: + needs_aneg = 1; + + phydev->link_timeout = PHY_AN_TIMEOUT; + + break; + case PHY_AN: + /* Check if negotiation is done. Break + * if there's an error */ + err = phy_aneg_done(phydev); + if (err < 0) + break; + + /* If auto-negotiation is done, we change to + * either RUNNING, or NOLINK */ + if (err > 0) { + err = phy_read_status(phydev); + + if (err) + break; + + if (phydev->link) { + phydev->state = PHY_RUNNING; + netif_carrier_on(phydev->attached_dev); + } else { + phydev->state = PHY_NOLINK; + netif_carrier_off(phydev->attached_dev); + } + + phydev->adjust_link(phydev->attached_dev); + + } else if (0 == phydev->link_timeout--) { + /* The counter expired, so either we + * switch to forced mode, or the + * magic_aneg bit exists, and we try aneg + * again */ + if (!(phydev->drv->flags & PHY_HAS_MAGICANEG)) { + int idx; + + /* We'll start from the + * fastest speed, and work + * our way down */ + idx = phy_find_valid(0, + phydev->supported); + + phydev->speed = settings[idx].speed; + phydev->duplex = settings[idx].duplex; + + phydev->autoneg = AUTONEG_DISABLE; + phydev->state = PHY_FORCING; + phydev->link_timeout = + PHY_FORCE_TIMEOUT; + + pr_info("Trying %d/%s\n", + phydev->speed, + DUPLEX_FULL == + phydev->duplex ? + "FULL" : "HALF"); + } + + needs_aneg = 1; + } + break; + case PHY_NOLINK: + err = phy_read_status(phydev); + + if (err) + break; + + if (phydev->link) { + phydev->state = PHY_RUNNING; + netif_carrier_on(phydev->attached_dev); + phydev->adjust_link(phydev->attached_dev); + } + break; + case PHY_FORCING: + err = phy_read_status(phydev); + + if (err) + break; + + if (phydev->link) { + phydev->state = PHY_RUNNING; + netif_carrier_on(phydev->attached_dev); + } else { + if (0 == phydev->link_timeout--) { + phy_force_reduction(phydev); + needs_aneg = 1; + } + } + + phydev->adjust_link(phydev->attached_dev); + break; + case PHY_RUNNING: + /* Only register a CHANGE if we are + * polling */ + if (PHY_POLL == phydev->irq) + phydev->state = PHY_CHANGELINK; + break; + case PHY_CHANGELINK: + err = phy_read_status(phydev); + + if (err) + break; + + if (phydev->link) { + phydev->state = PHY_RUNNING; + netif_carrier_on(phydev->attached_dev); + } else { + phydev->state = PHY_NOLINK; + netif_carrier_off(phydev->attached_dev); + } + + phydev->adjust_link(phydev->attached_dev); + + if (PHY_POLL != phydev->irq) + err = phy_config_interrupt(phydev, + PHY_INTERRUPT_ENABLED); + break; + case PHY_HALTED: + if (phydev->link) { + phydev->link = 0; + netif_carrier_off(phydev->attached_dev); + phydev->adjust_link(phydev->attached_dev); + } + break; + case PHY_RESUMING: + + err = phy_clear_interrupt(phydev); + + if (err) + break; + + err = phy_config_interrupt(phydev, + PHY_INTERRUPT_ENABLED); + + if (err) + break; + + if (AUTONEG_ENABLE == phydev->autoneg) { + err = phy_aneg_done(phydev); + if (err < 0) + break; + + /* err > 0 if AN is done. + * Otherwise, it's 0, and we're + * still waiting for AN */ + if (err > 0) { + phydev->state = PHY_RUNNING; + } else { + phydev->state = PHY_AN; + phydev->link_timeout = PHY_AN_TIMEOUT; + } + } else + phydev->state = PHY_RUNNING; + break; + } + + spin_unlock(&phydev->lock); + + if (needs_aneg) + err = phy_start_aneg(phydev); + + if (err < 0) + phy_error(phydev); + + mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ); +} + +#endif /* CONFIG_PHYCONTROL */ diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c new file mode 100644 index 000000000000..f0595af4c837 --- /dev/null +++ b/drivers/net/phy/phy_device.c @@ -0,0 +1,682 @@ +/* + * drivers/net/phy/phy_device.c + * + * Framework for finding and configuring PHYs. + * Also contains generic PHY driver + * + * Author: Andy Fleming + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* get_phy_device + * + * description: Reads the ID registers of the PHY at addr on the + * bus, then allocates and returns the phy_device to + * represent it. + */ +struct phy_device * get_phy_device(struct mii_bus *bus, int addr) +{ + int phy_reg; + u32 phy_id; + struct phy_device *dev = NULL; + + /* Grab the bits from PHYIR1, and put them + * in the upper half */ + phy_reg = bus->read(bus, addr, MII_PHYSID1); + + if (phy_reg < 0) + return ERR_PTR(phy_reg); + + phy_id = (phy_reg & 0xffff) << 16; + + /* Grab the bits from PHYIR2, and put them in the lower half */ + phy_reg = bus->read(bus, addr, MII_PHYSID2); + + if (phy_reg < 0) + return ERR_PTR(phy_reg); + + phy_id |= (phy_reg & 0xffff); + + /* If the phy_id is all Fs, there is no device there */ + if (0xffffffff == phy_id) + return NULL; + + /* Otherwise, we allocate the device, and initialize the + * default values */ + dev = kcalloc(1, sizeof(*dev), GFP_KERNEL); + + if (NULL == dev) + return ERR_PTR(-ENOMEM); + + dev->speed = 0; + dev->duplex = -1; + dev->pause = dev->asym_pause = 0; + dev->link = 1; + + dev->autoneg = AUTONEG_ENABLE; + + dev->addr = addr; + dev->phy_id = phy_id; + dev->bus = bus; + + dev->state = PHY_DOWN; + + spin_lock_init(&dev->lock); + + return dev; +} + +/* phy_prepare_link: + * + * description: Tells the PHY infrastructure to handle the + * gory details on monitoring link status (whether through + * polling or an interrupt), and to call back to the + * connected device driver when the link status changes. + * If you want to monitor your own link state, don't call + * this function */ +void phy_prepare_link(struct phy_device *phydev, + void (*handler)(struct net_device *)) +{ + phydev->adjust_link = handler; +} + +#ifdef CONFIG_PHYCONTROL +/* phy_connect: + * + * description: Convenience function for connecting ethernet + * devices to PHY devices. The default behavior is for + * the PHY infrastructure to handle everything, and only notify + * the connected driver when the link status changes. If you + * don't want, or can't use the provided functionality, you may + * choose to call only the subset of functions which provide + * the desired functionality. + */ +struct phy_device * phy_connect(struct net_device *dev, const char *phy_id, + void (*handler)(struct net_device *), u32 flags) +{ + struct phy_device *phydev; + + phydev = phy_attach(dev, phy_id, flags); + + if (IS_ERR(phydev)) + return phydev; + + phy_prepare_link(phydev, handler); + + phy_start_machine(phydev, NULL); + + if (phydev->irq > 0) + phy_start_interrupts(phydev); + + return phydev; +} +EXPORT_SYMBOL(phy_connect); + +void phy_disconnect(struct phy_device *phydev) +{ + if (phydev->irq > 0) + phy_stop_interrupts(phydev); + + phy_stop_machine(phydev); + + phydev->adjust_link = NULL; + + phy_detach(phydev); +} +EXPORT_SYMBOL(phy_disconnect); + +#endif /* CONFIG_PHYCONTROL */ + +/* phy_attach: + * + * description: Called by drivers to attach to a particular PHY + * device. The phy_device is found, and properly hooked up + * to the phy_driver. If no driver is attached, then the + * genphy_driver is used. The phy_device is given a ptr to + * the attaching device, and given a callback for link status + * change. The phy_device is returned to the attaching + * driver. + */ +static int phy_compare_id(struct device *dev, void *data) +{ + return strcmp((char *)data, dev->bus_id) ? 0 : 1; +} + +struct phy_device *phy_attach(struct net_device *dev, + const char *phy_id, u32 flags) +{ + struct bus_type *bus = &mdio_bus_type; + struct phy_device *phydev; + struct device *d; + + /* Search the list of PHY devices on the mdio bus for the + * PHY with the requested name */ + d = bus_find_device(bus, NULL, (void *)phy_id, phy_compare_id); + + if (d) { + phydev = to_phy_device(d); + } else { + printk(KERN_ERR "%s not found\n", phy_id); + return ERR_PTR(-ENODEV); + } + + /* Assume that if there is no driver, that it doesn't + * exist, and we should use the genphy driver. */ + if (NULL == d->driver) { + int err; + down_write(&d->bus->subsys.rwsem); + d->driver = &genphy_driver.driver; + + err = d->driver->probe(d); + + if (err < 0) + return ERR_PTR(err); + + device_bind_driver(d); + up_write(&d->bus->subsys.rwsem); + } + + if (phydev->attached_dev) { + printk(KERN_ERR "%s: %s already attached\n", + dev->name, phy_id); + return ERR_PTR(-EBUSY); + } + + phydev->attached_dev = dev; + + phydev->dev_flags = flags; + + return phydev; +} +EXPORT_SYMBOL(phy_attach); + +void phy_detach(struct phy_device *phydev) +{ + phydev->attached_dev = NULL; + + /* If the device had no specific driver before (i.e. - it + * was using the generic driver), we unbind the device + * from the generic driver so that there's a chance a + * real driver could be loaded */ + if (phydev->dev.driver == &genphy_driver.driver) { + down_write(&phydev->dev.bus->subsys.rwsem); + device_release_driver(&phydev->dev); + up_write(&phydev->dev.bus->subsys.rwsem); + } +} +EXPORT_SYMBOL(phy_detach); + + +/* Generic PHY support and helper functions */ + +/* genphy_config_advert + * + * description: Writes MII_ADVERTISE with the appropriate values, + * after sanitizing the values to make sure we only advertise + * what is supported + */ +int genphy_config_advert(struct phy_device *phydev) +{ + u32 advertise; + int adv; + int err; + + /* Only allow advertising what + * this PHY supports */ + phydev->advertising &= phydev->supported; + advertise = phydev->advertising; + + /* Setup standard advertisement */ + adv = phy_read(phydev, MII_ADVERTISE); + + if (adv < 0) + return adv; + + adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | + ADVERTISE_PAUSE_ASYM); + if (advertise & ADVERTISED_10baseT_Half) + adv |= ADVERTISE_10HALF; + if (advertise & ADVERTISED_10baseT_Full) + adv |= ADVERTISE_10FULL; + if (advertise & ADVERTISED_100baseT_Half) + adv |= ADVERTISE_100HALF; + if (advertise & ADVERTISED_100baseT_Full) + adv |= ADVERTISE_100FULL; + if (advertise & ADVERTISED_Pause) + adv |= ADVERTISE_PAUSE_CAP; + if (advertise & ADVERTISED_Asym_Pause) + adv |= ADVERTISE_PAUSE_ASYM; + + err = phy_write(phydev, MII_ADVERTISE, adv); + + if (err < 0) + return err; + + /* Configure gigabit if it's supported */ + if (phydev->supported & (SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full)) { + adv = phy_read(phydev, MII_CTRL1000); + + if (adv < 0) + return adv; + + adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); + if (advertise & SUPPORTED_1000baseT_Half) + adv |= ADVERTISE_1000HALF; + if (advertise & SUPPORTED_1000baseT_Full) + adv |= ADVERTISE_1000FULL; + err = phy_write(phydev, MII_CTRL1000, adv); + + if (err < 0) + return err; + } + + return adv; +} +EXPORT_SYMBOL(genphy_config_advert); + +/* genphy_setup_forced + * + * description: Configures MII_BMCR to force speed/duplex + * to the values in phydev. Assumes that the values are valid. + * Please see phy_sanitize_settings() */ +int genphy_setup_forced(struct phy_device *phydev) +{ + int ctl = BMCR_RESET; + + phydev->pause = phydev->asym_pause = 0; + + if (SPEED_1000 == phydev->speed) + ctl |= BMCR_SPEED1000; + else if (SPEED_100 == phydev->speed) + ctl |= BMCR_SPEED100; + + if (DUPLEX_FULL == phydev->duplex) + ctl |= BMCR_FULLDPLX; + + ctl = phy_write(phydev, MII_BMCR, ctl); + + if (ctl < 0) + return ctl; + + /* We just reset the device, so we'd better configure any + * settings the PHY requires to operate */ + if (phydev->drv->config_init) + ctl = phydev->drv->config_init(phydev); + + return ctl; +} + + +/* Enable and Restart Autonegotiation */ +int genphy_restart_aneg(struct phy_device *phydev) +{ + int ctl; + + ctl = phy_read(phydev, MII_BMCR); + + if (ctl < 0) + return ctl; + + ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); + + /* Don't isolate the PHY if we're negotiating */ + ctl &= ~(BMCR_ISOLATE); + + ctl = phy_write(phydev, MII_BMCR, ctl); + + return ctl; +} + + +/* genphy_config_aneg + * + * description: If auto-negotiation is enabled, we configure the + * advertising, and then restart auto-negotiation. If it is not + * enabled, then we write the BMCR + */ +int genphy_config_aneg(struct phy_device *phydev) +{ + int err = 0; + + if (AUTONEG_ENABLE == phydev->autoneg) { + err = genphy_config_advert(phydev); + + if (err < 0) + return err; + + err = genphy_restart_aneg(phydev); + } else + err = genphy_setup_forced(phydev); + + return err; +} +EXPORT_SYMBOL(genphy_config_aneg); + +/* genphy_update_link + * + * description: Update the value in phydev->link to reflect the + * current link value. In order to do this, we need to read + * the status register twice, keeping the second value + */ +int genphy_update_link(struct phy_device *phydev) +{ + int status; + + /* Do a fake read */ + status = phy_read(phydev, MII_BMSR); + + if (status < 0) + return status; + + /* Read link and autonegotiation status */ + status = phy_read(phydev, MII_BMSR); + + if (status < 0) + return status; + + if ((status & BMSR_LSTATUS) == 0) + phydev->link = 0; + else + phydev->link = 1; + + return 0; +} + +/* genphy_read_status + * + * description: Check the link, then figure out the current state + * by comparing what we advertise with what the link partner + * advertises. Start by checking the gigabit possibilities, + * then move on to 10/100. + */ +int genphy_read_status(struct phy_device *phydev) +{ + int adv; + int err; + int lpa; + int lpagb = 0; + + /* Update the link, but return if there + * was an error */ + err = genphy_update_link(phydev); + if (err) + return err; + + if (AUTONEG_ENABLE == phydev->autoneg) { + if (phydev->supported & (SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full)) { + lpagb = phy_read(phydev, MII_STAT1000); + + if (lpagb < 0) + return lpagb; + + adv = phy_read(phydev, MII_CTRL1000); + + if (adv < 0) + return adv; + + lpagb &= adv << 2; + } + + lpa = phy_read(phydev, MII_LPA); + + if (lpa < 0) + return lpa; + + adv = phy_read(phydev, MII_ADVERTISE); + + if (adv < 0) + return adv; + + lpa &= adv; + + phydev->speed = SPEED_10; + phydev->duplex = DUPLEX_HALF; + phydev->pause = phydev->asym_pause = 0; + + if (lpagb & (LPA_1000FULL | LPA_1000HALF)) { + phydev->speed = SPEED_1000; + + if (lpagb & LPA_1000FULL) + phydev->duplex = DUPLEX_FULL; + } else if (lpa & (LPA_100FULL | LPA_100HALF)) { + phydev->speed = SPEED_100; + + if (lpa & LPA_100FULL) + phydev->duplex = DUPLEX_FULL; + } else + if (lpa & LPA_10FULL) + phydev->duplex = DUPLEX_FULL; + + if (phydev->duplex == DUPLEX_FULL){ + phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; + phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; + } + } else { + int bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; + + if (bmcr & BMCR_FULLDPLX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + + if (bmcr & BMCR_SPEED1000) + phydev->speed = SPEED_1000; + else if (bmcr & BMCR_SPEED100) + phydev->speed = SPEED_100; + else + phydev->speed = SPEED_10; + + phydev->pause = phydev->asym_pause = 0; + } + + return 0; +} +EXPORT_SYMBOL(genphy_read_status); + +static int genphy_config_init(struct phy_device *phydev) +{ + u32 val; + u32 features; + + /* For now, I'll claim that the generic driver supports + * all possible port types */ + features = (SUPPORTED_TP | SUPPORTED_MII + | SUPPORTED_AUI | SUPPORTED_FIBRE | + SUPPORTED_BNC); + + /* Do we support autonegotiation? */ + val = phy_read(phydev, MII_BMSR); + + if (val < 0) + return val; + + if (val & BMSR_ANEGCAPABLE) + features |= SUPPORTED_Autoneg; + + if (val & BMSR_100FULL) + features |= SUPPORTED_100baseT_Full; + if (val & BMSR_100HALF) + features |= SUPPORTED_100baseT_Half; + if (val & BMSR_10FULL) + features |= SUPPORTED_10baseT_Full; + if (val & BMSR_10HALF) + features |= SUPPORTED_10baseT_Half; + + if (val & BMSR_ESTATEN) { + val = phy_read(phydev, MII_ESTATUS); + + if (val < 0) + return val; + + if (val & ESTATUS_1000_TFULL) + features |= SUPPORTED_1000baseT_Full; + if (val & ESTATUS_1000_THALF) + features |= SUPPORTED_1000baseT_Half; + } + + phydev->supported = features; + phydev->advertising = features; + + return 0; +} + + +/* phy_probe + * + * description: Take care of setting up the phy_device structure, + * set the state to READY (the driver's init function should + * set it to STARTING if needed). + */ +static int phy_probe(struct device *dev) +{ + struct phy_device *phydev; + struct phy_driver *phydrv; + struct device_driver *drv; + int err = 0; + + phydev = to_phy_device(dev); + + /* Make sure the driver is held. + * XXX -- Is this correct? */ + drv = get_driver(phydev->dev.driver); + phydrv = to_phy_driver(drv); + phydev->drv = phydrv; + + /* Disable the interrupt if the PHY doesn't support it */ + if (!(phydrv->flags & PHY_HAS_INTERRUPT)) + phydev->irq = PHY_POLL; + + spin_lock(&phydev->lock); + + /* Start out supporting everything. Eventually, + * a controller will attach, and may modify one + * or both of these values */ + phydev->supported = phydrv->features; + phydev->advertising = phydrv->features; + + /* Set the state to READY by default */ + phydev->state = PHY_READY; + + if (phydev->drv->probe) + err = phydev->drv->probe(phydev); + + spin_unlock(&phydev->lock); + + if (err < 0) + return err; + + if (phydev->drv->config_init) + err = phydev->drv->config_init(phydev); + + return err; +} + +static int phy_remove(struct device *dev) +{ + struct phy_device *phydev; + + phydev = to_phy_device(dev); + + spin_lock(&phydev->lock); + phydev->state = PHY_DOWN; + spin_unlock(&phydev->lock); + + if (phydev->drv->remove) + phydev->drv->remove(phydev); + + put_driver(dev->driver); + phydev->drv = NULL; + + return 0; +} + +int phy_driver_register(struct phy_driver *new_driver) +{ + int retval; + + memset(&new_driver->driver, 0, sizeof(new_driver->driver)); + new_driver->driver.name = new_driver->name; + new_driver->driver.bus = &mdio_bus_type; + new_driver->driver.probe = phy_probe; + new_driver->driver.remove = phy_remove; + + retval = driver_register(&new_driver->driver); + + if (retval) { + printk(KERN_ERR "%s: Error %d in registering driver\n", + new_driver->name, retval); + + return retval; + } + + pr_info("%s: Registered new driver\n", new_driver->name); + + return 0; +} +EXPORT_SYMBOL(phy_driver_register); + +void phy_driver_unregister(struct phy_driver *drv) +{ + driver_unregister(&drv->driver); +} +EXPORT_SYMBOL(phy_driver_unregister); + +static struct phy_driver genphy_driver = { + .phy_id = 0xffffffff, + .phy_id_mask = 0xffffffff, + .name = "Generic PHY", + .config_init = genphy_config_init, + .features = 0, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .driver = {.owner = THIS_MODULE, }, +}; + +static int __init genphy_init(void) +{ + return phy_driver_register(&genphy_driver); + +} + +static void __exit genphy_exit(void) +{ + phy_driver_unregister(&genphy_driver); +} + +module_init(genphy_init); +module_exit(genphy_exit); diff --git a/drivers/net/phy/qsemi.c b/drivers/net/phy/qsemi.c new file mode 100644 index 000000000000..d461ba457631 --- /dev/null +++ b/drivers/net/phy/qsemi.c @@ -0,0 +1,143 @@ +/* + * drivers/net/phy/qsemi.c + * + * Driver for Quality Semiconductor PHYs + * + * Author: Andy Fleming + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* ------------------------------------------------------------------------- */ +/* The Quality Semiconductor QS6612 is used on the RPX CLLF */ + +/* register definitions */ + +#define MII_QS6612_MCR 17 /* Mode Control Register */ +#define MII_QS6612_FTR 27 /* Factory Test Register */ +#define MII_QS6612_MCO 28 /* Misc. Control Register */ +#define MII_QS6612_ISR 29 /* Interrupt Source Register */ +#define MII_QS6612_IMR 30 /* Interrupt Mask Register */ +#define MII_QS6612_IMR_INIT 0x003a +#define MII_QS6612_PCR 31 /* 100BaseTx PHY Control Reg. */ + +#define QS6612_PCR_AN_COMPLETE 0x1000 +#define QS6612_PCR_RLBEN 0x0200 +#define QS6612_PCR_DCREN 0x0100 +#define QS6612_PCR_4B5BEN 0x0040 +#define QS6612_PCR_TX_ISOLATE 0x0020 +#define QS6612_PCR_MLT3_DIS 0x0002 +#define QS6612_PCR_SCRM_DESCRM 0x0001 + +MODULE_DESCRIPTION("Quality Semiconductor PHY driver"); +MODULE_AUTHOR("Andy Fleming"); +MODULE_LICENSE("GPL"); + +/* Returns 0, unless there's a write error */ +static int qs6612_config_init(struct phy_device *phydev) +{ + /* The PHY powers up isolated on the RPX, + * so send a command to allow operation. + * XXX - My docs indicate this should be 0x0940 + * ...or something. The current value sets three + * reserved bits, bit 11, which specifies it should be + * set to one, bit 10, which specifies it should be set + * to 0, and bit 7, which doesn't specify. However, my + * docs are preliminary, and I will leave it like this + * until someone more knowledgable corrects me or it. + * -- Andy Fleming + */ + return phy_write(phydev, MII_QS6612_PCR, 0x0dc0); +} + +static int qs6612_ack_interrupt(struct phy_device *phydev) +{ + int err; + + err = phy_read(phydev, MII_QS6612_ISR); + + if (err < 0) + return err; + + err = phy_read(phydev, MII_BMSR); + + if (err < 0) + return err; + + err = phy_read(phydev, MII_EXPANSION); + + if (err < 0) + return err; + + return 0; +} + +static int qs6612_config_intr(struct phy_device *phydev) +{ + int err; + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + err = phy_write(phydev, MII_QS6612_IMR, + MII_QS6612_IMR_INIT); + else + err = phy_write(phydev, MII_QS6612_IMR, 0); + + return err; + +} + +static struct phy_driver qs6612_driver = { + .phy_id = 0x00181440, + .name = "QS6612", + .phy_id_mask = 0xfffffff0, + .features = PHY_BASIC_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = qs6612_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = qs6612_ack_interrupt, + .config_intr = qs6612_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +static int __init qs6612_init(void) +{ + return phy_driver_register(&qs6612_driver); +} + +static void __exit qs6612_exit(void) +{ + phy_driver_unregister(&qs6612_driver); +} + +module_init(qs6612_init); +module_exit(qs6612_exit); -- cgit v1.2.1 From 6b38aefe924daf2e4fdd73b384f21c913f31b668 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 28 Jul 2005 15:00:15 -0400 Subject: [PATCH] bonding: ALB -- allow slave to use bond's MAC address if its own MAC address conflicts In ALB mode, allow new slave to use bond's MAC address if the new slave's MAC address is being used within the bond and no other slave is using the bond's MAC address. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/bonding/bond_alb.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 5ce606d9dc03..19e829b567d0 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -1106,18 +1106,13 @@ static int alb_handle_addr_collision_on_attach(struct bonding *bond, struct slav } } - if (found) { - /* a slave was found that is using the mac address - * of the new slave - */ - printk(KERN_ERR DRV_NAME - ": Error: the hw address of slave %s is not " - "unique - cannot enslave it!", - slave->dev->name); - return -EINVAL; - } + if (!found) + return 0; - return 0; + /* Try setting slave mac to bond address and fall-through + to code handling that situation below... */ + alb_set_slave_mac_addr(slave, bond->dev->dev_addr, + bond->alb_info.rlb_enabled); } /* The slave's address is equal to the address of the bond. -- cgit v1.2.1 From 504ff16cecf2a788181eddc9d6e47d94ce50a9f6 Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Wed, 27 Jul 2005 01:14:50 -0700 Subject: [PATCH] tms380tr: move to DMA API This patch makes tms380tr use the new DMA API. Now that on Alpha, this API also supports bus master DMA for ISA (platform) devices, i changed the driver to use this new API. This also works around a bug in the firmware loader: The example provided in Documentation/firmware_class no longer works, as the firmware loader now calls get_kobj_path_length() and the kernel promptly oopses, as the home-grown device doesn't have a parent. Of course, this doesn't happen with a "real" device which has its bus (or pseudo bus in the case of platform) as parent. Converted tms380tr to use new DMA API: - proteon.c, skisa.c: use platform pseudo bus to create a struct device - Space.c: delete init hooks - abyss.c, tmspci.c: pass struct device to tms380tr.c - tms380tr.c, tms380tr.h: new DMA API, use real device fo firmware loader Signed-off-by: Jochen Friedrich Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/Space.c | 6 --- drivers/net/tokenring/abyss.c | 2 +- drivers/net/tokenring/proteon.c | 104 ++++++++++++++++++--------------------- drivers/net/tokenring/skisa.c | 104 ++++++++++++++++++--------------------- drivers/net/tokenring/tms380tr.c | 37 +++++++------- drivers/net/tokenring/tms380tr.h | 8 +-- drivers/net/tokenring/tmspci.c | 4 +- 7 files changed, 122 insertions(+), 143 deletions(-) (limited to 'drivers') diff --git a/drivers/net/Space.c b/drivers/net/Space.c index 3707df6b0cfa..11c44becc08f 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -323,12 +323,6 @@ extern struct net_device *proteon_probe(int unit); extern struct net_device *smctr_probe(int unit); static struct devprobe2 tr_probes2[] __initdata = { -#ifdef CONFIG_SKISA - {sk_isa_probe, 0}, -#endif -#ifdef CONFIG_PROTEON - {proteon_probe, 0}, -#endif #ifdef CONFIG_SMCTR {smctr_probe, 0}, #endif diff --git a/drivers/net/tokenring/abyss.c b/drivers/net/tokenring/abyss.c index 87103c400999..f1e4ef1188e4 100644 --- a/drivers/net/tokenring/abyss.c +++ b/drivers/net/tokenring/abyss.c @@ -139,7 +139,7 @@ static int __devinit abyss_attach(struct pci_dev *pdev, const struct pci_device_ */ dev->base_addr += 0x10; - ret = tmsdev_init(dev, PCI_MAX_ADDRESS, pdev); + ret = tmsdev_init(dev, PCI_MAX_ADDRESS, &pdev->dev); if (ret) { printk("%s: unable to get memory for dev->priv.\n", dev->name); diff --git a/drivers/net/tokenring/proteon.c b/drivers/net/tokenring/proteon.c index 40ad0fde28af..0a9597738d6c 100644 --- a/drivers/net/tokenring/proteon.c +++ b/drivers/net/tokenring/proteon.c @@ -62,8 +62,7 @@ static int dmalist[] __initdata = { }; static char cardname[] = "Proteon 1392\0"; - -struct net_device *proteon_probe(int unit); +static u64 dma_mask = ISA_MAX_ADDRESS; static int proteon_open(struct net_device *dev); static void proteon_read_eeprom(struct net_device *dev); static unsigned short proteon_setnselout_pins(struct net_device *dev); @@ -116,7 +115,7 @@ nodev: return -ENODEV; } -static int __init setup_card(struct net_device *dev) +static int __init setup_card(struct net_device *dev, struct device *pdev) { struct net_local *tp; static int versionprinted; @@ -137,7 +136,7 @@ static int __init setup_card(struct net_device *dev) } } if (err) - goto out4; + goto out5; /* At this point we have found a valid card. */ @@ -145,14 +144,15 @@ static int __init setup_card(struct net_device *dev) printk(KERN_DEBUG "%s", version); err = -EIO; - if (tmsdev_init(dev, ISA_MAX_ADDRESS, NULL)) + pdev->dma_mask = &dma_mask; + if (tmsdev_init(dev, ISA_MAX_ADDRESS, pdev)) goto out4; dev->base_addr &= ~3; proteon_read_eeprom(dev); - printk(KERN_DEBUG "%s: Ring Station Address: ", dev->name); + printk(KERN_DEBUG "proteon.c: Ring Station Address: "); printk("%2.2x", dev->dev_addr[0]); for (j = 1; j < 6; j++) printk(":%2.2x", dev->dev_addr[j]); @@ -185,7 +185,7 @@ static int __init setup_card(struct net_device *dev) if(irqlist[j] == 0) { - printk(KERN_INFO "%s: AutoSelect no IRQ available\n", dev->name); + printk(KERN_INFO "proteon.c: AutoSelect no IRQ available\n"); goto out3; } } @@ -196,15 +196,15 @@ static int __init setup_card(struct net_device *dev) break; if (irqlist[j] == 0) { - printk(KERN_INFO "%s: Illegal IRQ %d specified\n", - dev->name, dev->irq); + printk(KERN_INFO "proteon.c: Illegal IRQ %d specified\n", + dev->irq); goto out3; } if (request_irq(dev->irq, tms380tr_interrupt, 0, cardname, dev)) { - printk(KERN_INFO "%s: Selected IRQ %d not available\n", - dev->name, dev->irq); + printk(KERN_INFO "proteon.c: Selected IRQ %d not available\n", + dev->irq); goto out3; } } @@ -220,7 +220,7 @@ static int __init setup_card(struct net_device *dev) if(dmalist[j] == 0) { - printk(KERN_INFO "%s: AutoSelect no DMA available\n", dev->name); + printk(KERN_INFO "proteon.c: AutoSelect no DMA available\n"); goto out2; } } @@ -231,25 +231,25 @@ static int __init setup_card(struct net_device *dev) break; if (dmalist[j] == 0) { - printk(KERN_INFO "%s: Illegal DMA %d specified\n", - dev->name, dev->dma); + printk(KERN_INFO "proteon.c: Illegal DMA %d specified\n", + dev->dma); goto out2; } if (request_dma(dev->dma, cardname)) { - printk(KERN_INFO "%s: Selected DMA %d not available\n", - dev->name, dev->dma); + printk(KERN_INFO "proteon.c: Selected DMA %d not available\n", + dev->dma); goto out2; } } - printk(KERN_DEBUG "%s: IO: %#4lx IRQ: %d DMA: %d\n", - dev->name, dev->base_addr, dev->irq, dev->dma); - err = register_netdev(dev); if (err) goto out; + printk(KERN_DEBUG "%s: IO: %#4lx IRQ: %d DMA: %d\n", + dev->name, dev->base_addr, dev->irq, dev->dma); + return 0; out: free_dma(dev->dma); @@ -258,34 +258,11 @@ out2: out3: tmsdev_term(dev); out4: - release_region(dev->base_addr, PROTEON_IO_EXTENT); + release_region(dev->base_addr, PROTEON_IO_EXTENT); +out5: return err; } -struct net_device * __init proteon_probe(int unit) -{ - struct net_device *dev = alloc_trdev(sizeof(struct net_local)); - int err = 0; - - if (!dev) - return ERR_PTR(-ENOMEM); - - if (unit >= 0) { - sprintf(dev->name, "tr%d", unit); - netdev_boot_setup_check(dev); - } - - err = setup_card(dev); - if (err) - goto out; - - return dev; - -out: - free_netdev(dev); - return ERR_PTR(err); -} - /* * Reads MAC address from adapter RAM, which should've read it from * the onboard ROM. @@ -352,8 +329,6 @@ static int proteon_open(struct net_device *dev) return tms380tr_open(dev); } -#ifdef MODULE - #define ISATR_MAX_ADAPTERS 3 static int io[ISATR_MAX_ADAPTERS]; @@ -366,13 +341,23 @@ module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); module_param_array(dma, int, NULL, 0); -static struct net_device *proteon_dev[ISATR_MAX_ADAPTERS]; +static struct platform_device *proteon_dev[ISATR_MAX_ADAPTERS]; + +static struct device_driver proteon_driver = { + .name = "proteon", + .bus = &platform_bus_type, +}; -int init_module(void) +static int __init proteon_init(void) { struct net_device *dev; + struct platform_device *pdev; int i, num = 0, err = 0; + err = driver_register(&proteon_driver); + if (err) + return err; + for (i = 0; i < ISATR_MAX_ADAPTERS ; i++) { dev = alloc_trdev(sizeof(struct net_local)); if (!dev) @@ -381,11 +366,15 @@ int init_module(void) dev->base_addr = io[i]; dev->irq = irq[i]; dev->dma = dma[i]; - err = setup_card(dev); + pdev = platform_device_register_simple("proteon", + i, NULL, 0); + err = setup_card(dev, &pdev->dev); if (!err) { - proteon_dev[i] = dev; + proteon_dev[i] = pdev; + dev_set_drvdata(&pdev->dev, dev); ++num; } else { + platform_device_unregister(pdev); free_netdev(dev); } } @@ -399,23 +388,28 @@ int init_module(void) return (0); } -void cleanup_module(void) +static void __exit proteon_cleanup(void) { + struct net_device *dev; int i; for (i = 0; i < ISATR_MAX_ADAPTERS ; i++) { - struct net_device *dev = proteon_dev[i]; + struct platform_device *pdev = proteon_dev[i]; - if (!dev) + if (!pdev) continue; - + dev = dev_get_drvdata(&pdev->dev); unregister_netdev(dev); release_region(dev->base_addr, PROTEON_IO_EXTENT); free_irq(dev->irq, dev); free_dma(dev->dma); tmsdev_term(dev); free_netdev(dev); + dev_set_drvdata(&pdev->dev, NULL); + platform_device_unregister(pdev); } + driver_unregister(&proteon_driver); } -#endif /* MODULE */ +module_init(proteon_init); +module_exit(proteon_cleanup); diff --git a/drivers/net/tokenring/skisa.c b/drivers/net/tokenring/skisa.c index f26796e2d0e5..03f061941d77 100644 --- a/drivers/net/tokenring/skisa.c +++ b/drivers/net/tokenring/skisa.c @@ -68,8 +68,7 @@ static int dmalist[] __initdata = { }; static char isa_cardname[] = "SK NET TR 4/16 ISA\0"; - -struct net_device *sk_isa_probe(int unit); +static u64 dma_mask = ISA_MAX_ADDRESS; static int sk_isa_open(struct net_device *dev); static void sk_isa_read_eeprom(struct net_device *dev); static unsigned short sk_isa_setnselout_pins(struct net_device *dev); @@ -133,7 +132,7 @@ static int __init sk_isa_probe1(struct net_device *dev, int ioaddr) return 0; } -static int __init setup_card(struct net_device *dev) +static int __init setup_card(struct net_device *dev, struct device *pdev) { struct net_local *tp; static int versionprinted; @@ -154,7 +153,7 @@ static int __init setup_card(struct net_device *dev) } } if (err) - goto out4; + goto out5; /* At this point we have found a valid card. */ @@ -162,14 +161,15 @@ static int __init setup_card(struct net_device *dev) printk(KERN_DEBUG "%s", version); err = -EIO; - if (tmsdev_init(dev, ISA_MAX_ADDRESS, NULL)) + pdev->dma_mask = &dma_mask; + if (tmsdev_init(dev, ISA_MAX_ADDRESS, pdev)) goto out4; dev->base_addr &= ~3; sk_isa_read_eeprom(dev); - printk(KERN_DEBUG "%s: Ring Station Address: ", dev->name); + printk(KERN_DEBUG "skisa.c: Ring Station Address: "); printk("%2.2x", dev->dev_addr[0]); for (j = 1; j < 6; j++) printk(":%2.2x", dev->dev_addr[j]); @@ -202,7 +202,7 @@ static int __init setup_card(struct net_device *dev) if(irqlist[j] == 0) { - printk(KERN_INFO "%s: AutoSelect no IRQ available\n", dev->name); + printk(KERN_INFO "skisa.c: AutoSelect no IRQ available\n"); goto out3; } } @@ -213,15 +213,15 @@ static int __init setup_card(struct net_device *dev) break; if (irqlist[j] == 0) { - printk(KERN_INFO "%s: Illegal IRQ %d specified\n", - dev->name, dev->irq); + printk(KERN_INFO "skisa.c: Illegal IRQ %d specified\n", + dev->irq); goto out3; } if (request_irq(dev->irq, tms380tr_interrupt, 0, isa_cardname, dev)) { - printk(KERN_INFO "%s: Selected IRQ %d not available\n", - dev->name, dev->irq); + printk(KERN_INFO "skisa.c: Selected IRQ %d not available\n", + dev->irq); goto out3; } } @@ -237,7 +237,7 @@ static int __init setup_card(struct net_device *dev) if(dmalist[j] == 0) { - printk(KERN_INFO "%s: AutoSelect no DMA available\n", dev->name); + printk(KERN_INFO "skisa.c: AutoSelect no DMA available\n"); goto out2; } } @@ -248,25 +248,25 @@ static int __init setup_card(struct net_device *dev) break; if (dmalist[j] == 0) { - printk(KERN_INFO "%s: Illegal DMA %d specified\n", - dev->name, dev->dma); + printk(KERN_INFO "skisa.c: Illegal DMA %d specified\n", + dev->dma); goto out2; } if (request_dma(dev->dma, isa_cardname)) { - printk(KERN_INFO "%s: Selected DMA %d not available\n", - dev->name, dev->dma); + printk(KERN_INFO "skisa.c: Selected DMA %d not available\n", + dev->dma); goto out2; } } - printk(KERN_DEBUG "%s: IO: %#4lx IRQ: %d DMA: %d\n", - dev->name, dev->base_addr, dev->irq, dev->dma); - err = register_netdev(dev); if (err) goto out; + printk(KERN_DEBUG "%s: IO: %#4lx IRQ: %d DMA: %d\n", + dev->name, dev->base_addr, dev->irq, dev->dma); + return 0; out: free_dma(dev->dma); @@ -275,33 +275,11 @@ out2: out3: tmsdev_term(dev); out4: - release_region(dev->base_addr, SK_ISA_IO_EXTENT); + release_region(dev->base_addr, SK_ISA_IO_EXTENT); +out5: return err; } -struct net_device * __init sk_isa_probe(int unit) -{ - struct net_device *dev = alloc_trdev(sizeof(struct net_local)); - int err = 0; - - if (!dev) - return ERR_PTR(-ENOMEM); - - if (unit >= 0) { - sprintf(dev->name, "tr%d", unit); - netdev_boot_setup_check(dev); - } - - err = setup_card(dev); - if (err) - goto out; - - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} - /* * Reads MAC address from adapter RAM, which should've read it from * the onboard ROM. @@ -361,8 +339,6 @@ static int sk_isa_open(struct net_device *dev) return tms380tr_open(dev); } -#ifdef MODULE - #define ISATR_MAX_ADAPTERS 3 static int io[ISATR_MAX_ADAPTERS]; @@ -375,13 +351,23 @@ module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); module_param_array(dma, int, NULL, 0); -static struct net_device *sk_isa_dev[ISATR_MAX_ADAPTERS]; +static struct platform_device *sk_isa_dev[ISATR_MAX_ADAPTERS]; -int init_module(void) +static struct device_driver sk_isa_driver = { + .name = "skisa", + .bus = &platform_bus_type, +}; + +static int __init sk_isa_init(void) { struct net_device *dev; + struct platform_device *pdev; int i, num = 0, err = 0; + err = driver_register(&sk_isa_driver); + if (err) + return err; + for (i = 0; i < ISATR_MAX_ADAPTERS ; i++) { dev = alloc_trdev(sizeof(struct net_local)); if (!dev) @@ -390,12 +376,15 @@ int init_module(void) dev->base_addr = io[i]; dev->irq = irq[i]; dev->dma = dma[i]; - err = setup_card(dev); - + pdev = platform_device_register_simple("skisa", + i, NULL, 0); + err = setup_card(dev, &pdev->dev); if (!err) { - sk_isa_dev[i] = dev; + sk_isa_dev[i] = pdev; + dev_set_drvdata(&sk_isa_dev[i]->dev, dev); ++num; } else { + platform_device_unregister(pdev); free_netdev(dev); } } @@ -409,23 +398,28 @@ int init_module(void) return (0); } -void cleanup_module(void) +static void __exit sk_isa_cleanup(void) { + struct net_device *dev; int i; for (i = 0; i < ISATR_MAX_ADAPTERS ; i++) { - struct net_device *dev = sk_isa_dev[i]; + struct platform_device *pdev = sk_isa_dev[i]; - if (!dev) + if (!pdev) continue; - + dev = dev_get_drvdata(&pdev->dev); unregister_netdev(dev); release_region(dev->base_addr, SK_ISA_IO_EXTENT); free_irq(dev->irq, dev); free_dma(dev->dma); tmsdev_term(dev); free_netdev(dev); + dev_set_drvdata(&pdev->dev, NULL); + platform_device_unregister(pdev); } + driver_unregister(&sk_isa_driver); } -#endif /* MODULE */ +module_init(sk_isa_init); +module_exit(sk_isa_cleanup); diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c index 5e0b0ce98ed7..9a543fe2d0e6 100644 --- a/drivers/net/tokenring/tms380tr.c +++ b/drivers/net/tokenring/tms380tr.c @@ -62,6 +62,7 @@ * normal operation. * 30-Dec-02 JF Removed incorrect __init from * tms380tr_init_card. + * 22-Jul-05 JF Converted to dma-mapping. * * To do: * 1. Multi/Broadcast packet handling (this may have fixed itself) @@ -89,7 +90,7 @@ static const char version[] = "tms380tr.c: v1.10 30/12/2002 by Christoph Goos, A #include #include #include -#include +#include #include #include #include @@ -114,8 +115,6 @@ static const char version[] = "tms380tr.c: v1.10 30/12/2002 by Christoph Goos, A #endif static unsigned int tms380tr_debug = TMS380TR_DEBUG; -static struct device tms_device; - /* Index to functions, as function prototypes. * Alphabetical by function name. */ @@ -434,7 +433,7 @@ static void tms380tr_init_net_local(struct net_device *dev) skb_put(tp->Rpl[i].Skb, tp->MaxPacketSize); /* data unreachable for DMA ? then use local buffer */ - dmabuf = pci_map_single(tp->pdev, tp->Rpl[i].Skb->data, tp->MaxPacketSize, PCI_DMA_FROMDEVICE); + dmabuf = dma_map_single(tp->pdev, tp->Rpl[i].Skb->data, tp->MaxPacketSize, DMA_FROM_DEVICE); if(tp->dmalimit && (dmabuf + tp->MaxPacketSize > tp->dmalimit)) { tp->Rpl[i].SkbStat = SKB_DATA_COPY; @@ -638,10 +637,10 @@ static int tms380tr_hardware_send_packet(struct sk_buff *skb, struct net_device /* Is buffer reachable for Busmaster-DMA? */ length = skb->len; - dmabuf = pci_map_single(tp->pdev, skb->data, length, PCI_DMA_TODEVICE); + dmabuf = dma_map_single(tp->pdev, skb->data, length, DMA_TO_DEVICE); if(tp->dmalimit && (dmabuf + length > tp->dmalimit)) { /* Copy frame to local buffer */ - pci_unmap_single(tp->pdev, dmabuf, length, PCI_DMA_TODEVICE); + dma_unmap_single(tp->pdev, dmabuf, length, DMA_TO_DEVICE); dmabuf = 0; i = tp->TplFree->TPLIndex; buf = tp->LocalTxBuffers[i]; @@ -1284,9 +1283,7 @@ static int tms380tr_reset_adapter(struct net_device *dev) unsigned short count, c, count2; const struct firmware *fw_entry = NULL; - strncpy(tms_device.bus_id,dev->name, BUS_ID_SIZE); - - if (request_firmware(&fw_entry, "tms380tr.bin", &tms_device) != 0) { + if (request_firmware(&fw_entry, "tms380tr.bin", tp->pdev) != 0) { printk(KERN_ALERT "%s: firmware %s is missing, cannot start.\n", dev->name, "tms380tr.bin"); return (-1); @@ -2021,7 +2018,7 @@ static void tms380tr_cancel_tx_queue(struct net_local* tp) printk(KERN_INFO "Cancel tx (%08lXh).\n", (unsigned long)tpl); if (tpl->DMABuff) - pci_unmap_single(tp->pdev, tpl->DMABuff, tpl->Skb->len, PCI_DMA_TODEVICE); + dma_unmap_single(tp->pdev, tpl->DMABuff, tpl->Skb->len, DMA_TO_DEVICE); dev_kfree_skb_any(tpl->Skb); } @@ -2090,7 +2087,7 @@ static void tms380tr_tx_status_irq(struct net_device *dev) tp->MacStat.tx_packets++; if (tpl->DMABuff) - pci_unmap_single(tp->pdev, tpl->DMABuff, tpl->Skb->len, PCI_DMA_TODEVICE); + dma_unmap_single(tp->pdev, tpl->DMABuff, tpl->Skb->len, DMA_TO_DEVICE); dev_kfree_skb_irq(tpl->Skb); tpl->BusyFlag = 0; /* "free" TPL */ } @@ -2209,7 +2206,7 @@ static void tms380tr_rcv_status_irq(struct net_device *dev) tp->MacStat.rx_errors++; } if (rpl->DMABuff) - pci_unmap_single(tp->pdev, rpl->DMABuff, tp->MaxPacketSize, PCI_DMA_TODEVICE); + dma_unmap_single(tp->pdev, rpl->DMABuff, tp->MaxPacketSize, DMA_TO_DEVICE); rpl->DMABuff = 0; /* Allocate new skb for rpl */ @@ -2227,7 +2224,7 @@ static void tms380tr_rcv_status_irq(struct net_device *dev) skb_put(rpl->Skb, tp->MaxPacketSize); /* Data unreachable for DMA ? then use local buffer */ - dmabuf = pci_map_single(tp->pdev, rpl->Skb->data, tp->MaxPacketSize, PCI_DMA_FROMDEVICE); + dmabuf = dma_map_single(tp->pdev, rpl->Skb->data, tp->MaxPacketSize, DMA_FROM_DEVICE); if(tp->dmalimit && (dmabuf + tp->MaxPacketSize > tp->dmalimit)) { rpl->SkbStat = SKB_DATA_COPY; @@ -2332,12 +2329,12 @@ void tmsdev_term(struct net_device *dev) struct net_local *tp; tp = netdev_priv(dev); - pci_unmap_single(tp->pdev, tp->dmabuffer, sizeof(struct net_local), - PCI_DMA_BIDIRECTIONAL); + dma_unmap_single(tp->pdev, tp->dmabuffer, sizeof(struct net_local), + DMA_BIDIRECTIONAL); } int tmsdev_init(struct net_device *dev, unsigned long dmalimit, - struct pci_dev *pdev) + struct device *pdev) { struct net_local *tms_local; @@ -2346,8 +2343,8 @@ int tmsdev_init(struct net_device *dev, unsigned long dmalimit, init_waitqueue_head(&tms_local->wait_for_tok_int); tms_local->dmalimit = dmalimit; tms_local->pdev = pdev; - tms_local->dmabuffer = pci_map_single(pdev, (void *)tms_local, - sizeof(struct net_local), PCI_DMA_BIDIRECTIONAL); + tms_local->dmabuffer = dma_map_single(pdev, (void *)tms_local, + sizeof(struct net_local), DMA_BIDIRECTIONAL); if (tms_local->dmabuffer + sizeof(struct net_local) > dmalimit) { printk(KERN_INFO "%s: Memory not accessible for DMA\n", @@ -2370,8 +2367,6 @@ int tmsdev_init(struct net_device *dev, unsigned long dmalimit, return 0; } -#ifdef MODULE - EXPORT_SYMBOL(tms380tr_open); EXPORT_SYMBOL(tms380tr_close); EXPORT_SYMBOL(tms380tr_interrupt); @@ -2379,6 +2374,8 @@ EXPORT_SYMBOL(tmsdev_init); EXPORT_SYMBOL(tmsdev_term); EXPORT_SYMBOL(tms380tr_wait); +#ifdef MODULE + static struct module *TMS380_module = NULL; int init_module(void) diff --git a/drivers/net/tokenring/tms380tr.h b/drivers/net/tokenring/tms380tr.h index f2c5ba0f37a5..077f568d89d1 100644 --- a/drivers/net/tokenring/tms380tr.h +++ b/drivers/net/tokenring/tms380tr.h @@ -18,7 +18,7 @@ int tms380tr_open(struct net_device *dev); int tms380tr_close(struct net_device *dev); irqreturn_t tms380tr_interrupt(int irq, void *dev_id, struct pt_regs *regs); int tmsdev_init(struct net_device *dev, unsigned long dmalimit, - struct pci_dev *pdev); + struct device *pdev); void tmsdev_term(struct net_device *dev); void tms380tr_wait(unsigned long time); @@ -719,7 +719,7 @@ struct s_TPL { /* Transmit Parameter List (align on even word boundaries) */ struct sk_buff *Skb; unsigned char TPLIndex; volatile unsigned char BusyFlag;/* Flag: TPL busy? */ - dma_addr_t DMABuff; /* DMA IO bus address from pci_map */ + dma_addr_t DMABuff; /* DMA IO bus address from dma_map */ }; /* ---------------------Receive Functions-------------------------------* @@ -1060,7 +1060,7 @@ struct s_RPL { /* Receive Parameter List */ struct sk_buff *Skb; SKB_STAT SkbStat; int RPLIndex; - dma_addr_t DMABuff; /* DMA IO bus address from pci_map */ + dma_addr_t DMABuff; /* DMA IO bus address from dma_map */ }; /* Information that need to be kept for each board. */ @@ -1091,7 +1091,7 @@ typedef struct net_local { RPL *RplTail; unsigned char LocalRxBuffers[RPL_NUM][DEFAULT_PACKET_SIZE]; - struct pci_dev *pdev; + struct device *pdev; int DataRate; unsigned char ScbInUse; unsigned short CMDqueue; diff --git a/drivers/net/tokenring/tmspci.c b/drivers/net/tokenring/tmspci.c index 2e18c0a46482..0014aef5c744 100644 --- a/drivers/net/tokenring/tmspci.c +++ b/drivers/net/tokenring/tmspci.c @@ -100,7 +100,7 @@ static int __devinit tms_pci_attach(struct pci_dev *pdev, const struct pci_devic unsigned int pci_irq_line; unsigned long pci_ioaddr; struct card_info *cardinfo = &card_info_table[ent->driver_data]; - + if (versionprinted++ == 0) printk("%s", version); @@ -143,7 +143,7 @@ static int __devinit tms_pci_attach(struct pci_dev *pdev, const struct pci_devic printk(":%2.2x", dev->dev_addr[i]); printk("\n"); - ret = tmsdev_init(dev, PCI_MAX_ADDRESS, pdev); + ret = tmsdev_init(dev, PCI_MAX_ADDRESS, &pdev->dev); if (ret) { printk("%s: unable to get memory for dev->priv.\n", dev->name); goto err_out_irq; -- cgit v1.2.1 From 6b9b97ce70b789014515f808b1b64c8e29e300d1 Mon Sep 17 00:00:00 2001 From: Peter Hagervall Date: Wed, 27 Jul 2005 01:14:46 -0700 Subject: [PATCH] orinoco: Sparse fixes A few sparse cleanups for orinoco.c Signed-off-by: Peter Hagervall Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 78 +++++++++++++++++++++--------------------- 1 file changed, 39 insertions(+), 39 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index aabcdc2be05e..9c2d07cde010 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -4322,36 +4322,36 @@ static const struct iw_priv_args orinoco_privtab[] = { */ static const iw_handler orinoco_handler[] = { - [SIOCSIWCOMMIT-SIOCIWFIRST] (iw_handler) orinoco_ioctl_commit, - [SIOCGIWNAME -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getname, - [SIOCSIWFREQ -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setfreq, - [SIOCGIWFREQ -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getfreq, - [SIOCSIWMODE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setmode, - [SIOCGIWMODE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getmode, - [SIOCSIWSENS -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setsens, - [SIOCGIWSENS -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getsens, - [SIOCGIWRANGE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getiwrange, - [SIOCSIWSPY -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setspy, - [SIOCGIWSPY -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getspy, - [SIOCSIWAP -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setwap, - [SIOCGIWAP -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getwap, - [SIOCSIWSCAN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setscan, - [SIOCGIWSCAN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getscan, - [SIOCSIWESSID -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setessid, - [SIOCGIWESSID -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getessid, - [SIOCSIWNICKN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setnick, - [SIOCGIWNICKN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getnick, - [SIOCSIWRATE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setrate, - [SIOCGIWRATE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getrate, - [SIOCSIWRTS -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setrts, - [SIOCGIWRTS -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getrts, - [SIOCSIWFRAG -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setfrag, - [SIOCGIWFRAG -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getfrag, - [SIOCGIWRETRY -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getretry, - [SIOCSIWENCODE-SIOCIWFIRST] (iw_handler) orinoco_ioctl_setiwencode, - [SIOCGIWENCODE-SIOCIWFIRST] (iw_handler) orinoco_ioctl_getiwencode, - [SIOCSIWPOWER -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setpower, - [SIOCGIWPOWER -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getpower, + [SIOCSIWCOMMIT-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_commit, + [SIOCGIWNAME -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getname, + [SIOCSIWFREQ -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfreq, + [SIOCGIWFREQ -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfreq, + [SIOCSIWMODE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setmode, + [SIOCGIWMODE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getmode, + [SIOCSIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setsens, + [SIOCGIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getsens, + [SIOCGIWRANGE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwrange, + [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setspy, + [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getspy, + [SIOCSIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setwap, + [SIOCGIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getwap, + [SIOCSIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setscan, + [SIOCGIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getscan, + [SIOCSIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setessid, + [SIOCGIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getessid, + [SIOCSIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setnick, + [SIOCGIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getnick, + [SIOCSIWRATE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrate, + [SIOCGIWRATE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrate, + [SIOCSIWRTS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrts, + [SIOCGIWRTS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrts, + [SIOCSIWFRAG -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfrag, + [SIOCGIWFRAG -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfrag, + [SIOCGIWRETRY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getretry, + [SIOCSIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setiwencode, + [SIOCGIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwencode, + [SIOCSIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setpower, + [SIOCGIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getpower, }; @@ -4359,15 +4359,15 @@ static const iw_handler orinoco_handler[] = { Added typecasting since we no longer use iwreq_data -- Moustafa */ static const iw_handler orinoco_private_handler[] = { - [0] (iw_handler) orinoco_ioctl_reset, - [1] (iw_handler) orinoco_ioctl_reset, - [2] (iw_handler) orinoco_ioctl_setport3, - [3] (iw_handler) orinoco_ioctl_getport3, - [4] (iw_handler) orinoco_ioctl_setpreamble, - [5] (iw_handler) orinoco_ioctl_getpreamble, - [6] (iw_handler) orinoco_ioctl_setibssport, - [7] (iw_handler) orinoco_ioctl_getibssport, - [9] (iw_handler) orinoco_ioctl_getrid, + [0] = (iw_handler) orinoco_ioctl_reset, + [1] = (iw_handler) orinoco_ioctl_reset, + [2] = (iw_handler) orinoco_ioctl_setport3, + [3] = (iw_handler) orinoco_ioctl_getport3, + [4] = (iw_handler) orinoco_ioctl_setpreamble, + [5] = (iw_handler) orinoco_ioctl_getpreamble, + [6] = (iw_handler) orinoco_ioctl_setibssport, + [7] = (iw_handler) orinoco_ioctl_getibssport, + [9] = (iw_handler) orinoco_ioctl_getrid, }; static const struct iw_handler_def orinoco_handler_def = { -- cgit v1.2.1 From cd8749b4aa6b7502e234d72cb53c00a3bc27ed1b Mon Sep 17 00:00:00 2001 From: Marcelo Feitoza Parisi Date: Fri, 15 Jul 2005 11:16:42 +0100 Subject: [PATCH] Use time_before in hamradio drivers Use of time_before() macro, defined at linux/jiffies.h, which deal with wrapping correctly and are nicer to read. Signed-off-by: Marcelo Feitoza Parisi Signed-off-by: Domen Puncer Signed-off-by: Ralf Baechle DL5RB baycom_epp.c | 3 ++- baycom_par.c | 3 ++- baycom_ser_fdx.c | 3 ++- baycom_ser_hdx.c | 3 ++- mkiss.c | 3 ++- 5 files changed, 10 insertions(+), 5 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/hamradio/baycom_epp.c | 3 ++- drivers/net/hamradio/baycom_par.c | 3 ++- drivers/net/hamradio/baycom_ser_fdx.c | 3 ++- drivers/net/hamradio/baycom_ser_hdx.c | 3 ++- drivers/net/hamradio/mkiss.c | 3 ++- 5 files changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index a7f15d9f13e5..5298096afbdb 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -54,6 +54,7 @@ #include #include #include +#include #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE) /* prototypes for ax25_encapsulate and ax25_rebuild_header */ #include @@ -287,7 +288,7 @@ static inline void baycom_int_freq(struct baycom_state *bc) * measure the interrupt frequency */ bc->debug_vals.cur_intcnt++; - if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) { + if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) { bc->debug_vals.last_jiffies = cur_jiffies; bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt; bc->debug_vals.cur_intcnt = 0; diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c index 612ad452bee0..3b1bef1ee215 100644 --- a/drivers/net/hamradio/baycom_par.c +++ b/drivers/net/hamradio/baycom_par.c @@ -84,6 +84,7 @@ #include #include #include +#include #include #include @@ -165,7 +166,7 @@ static void __inline__ baycom_int_freq(struct baycom_state *bc) * measure the interrupt frequency */ bc->debug_vals.cur_intcnt++; - if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) { + if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) { bc->debug_vals.last_jiffies = cur_jiffies; bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt; bc->debug_vals.cur_intcnt = 0; diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c index 25f270b05378..232793d2ce6b 100644 --- a/drivers/net/hamradio/baycom_ser_fdx.c +++ b/drivers/net/hamradio/baycom_ser_fdx.c @@ -79,6 +79,7 @@ #include #include #include +#include /* --------------------------------------------------------------------- */ @@ -159,7 +160,7 @@ static inline void baycom_int_freq(struct baycom_state *bc) * measure the interrupt frequency */ bc->debug_vals.cur_intcnt++; - if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) { + if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) { bc->debug_vals.last_jiffies = cur_jiffies; bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt; bc->debug_vals.cur_intcnt = 0; diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c index eead85d00962..be596a3eb3fd 100644 --- a/drivers/net/hamradio/baycom_ser_hdx.c +++ b/drivers/net/hamradio/baycom_ser_hdx.c @@ -69,6 +69,7 @@ #include #include #include +#include /* --------------------------------------------------------------------- */ @@ -150,7 +151,7 @@ static inline void baycom_int_freq(struct baycom_state *bc) * measure the interrupt frequency */ bc->debug_vals.cur_intcnt++; - if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) { + if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) { bc->debug_vals.last_jiffies = cur_jiffies; bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt; bc->debug_vals.cur_intcnt = 0; diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 3035422f5ad8..e94952e799fe 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -46,6 +46,7 @@ #include #include #include +#include #include @@ -429,7 +430,7 @@ static int ax_xmit(struct sk_buff *skb, struct net_device *dev) * May be we must check transmitter timeout here ? * 14 Oct 1994 Dmitry Gorodchanin. */ - if (jiffies - dev->trans_start < 20 * HZ) { + if (time_before(jiffies, dev->trans_start + 20 * HZ)) { /* 20 sec timeout not reached */ return 1; } -- cgit v1.2.1 From 2f761478a2b436efa23659b4d5c826e53b11f91a Mon Sep 17 00:00:00 2001 From: Victor Fusco Date: Fri, 1 Jul 2005 00:03:12 +0200 Subject: [PATCH] drivers/net/pci-skeleton.c: MODULE_PARM -> module_param Use module_param() instead of the old MODULE_PARM() Signed-off-by: Victor Fusco Signed-off-by: Domen Puncer Signed-off-by: Jeff Garzik --- drivers/net/pci-skeleton.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c index 4a391ea0f58a..a1ac4bd1696e 100644 --- a/drivers/net/pci-skeleton.c +++ b/drivers/net/pci-skeleton.c @@ -486,9 +486,9 @@ struct netdrv_private { MODULE_AUTHOR ("Jeff Garzik "); MODULE_DESCRIPTION ("Skeleton for a PCI Fast Ethernet driver"); MODULE_LICENSE("GPL"); -MODULE_PARM (multicast_filter_limit, "i"); -MODULE_PARM (max_interrupt_work, "i"); -MODULE_PARM (media, "1-" __MODULE_STRING(8) "i"); +module_param(multicast_filter_limit, int, 0); +module_param(max_interrupt_work, int, 0); +module_param_array(media, int, NULL, 0); MODULE_PARM_DESC (multicast_filter_limit, "pci-skeleton maximum number of filtered multicast addresses"); MODULE_PARM_DESC (max_interrupt_work, "pci-skeleton maximum events handled per interrupt"); MODULE_PARM_DESC (media, "pci-skeleton: Bits 0-3: media type, bit 17: full duplex"); -- cgit v1.2.1 From 541134cfe7af179f45458b68421ee1da7bab9cba Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Sun, 3 Jul 2005 13:44:39 +0100 Subject: [PATCH] sata_nv: Support MCP51/MCP55 device IDs This is a multi-part message in MIME format. Signed-off-by: Jeff Garzik --- drivers/scsi/sata_nv.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index b0403ccd8a25..9b9142790bd6 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -20,6 +20,12 @@ * If you do not delete the provisions above, a recipient may use your * version of this file under either the OSL or the GPL. * + * 0.08 + * - Added support for MCP51 and MCP55. + * + * 0.07 + * - Added support for RAID class code. + * * 0.06 * - Added generic SATA support by using a pci_device_id that filters on * the IDE storage class code. @@ -48,7 +54,7 @@ #include #define DRV_NAME "sata_nv" -#define DRV_VERSION "0.6" +#define DRV_VERSION "0.8" #define NV_PORTS 2 #define NV_PIO_MASK 0x1f @@ -116,7 +122,9 @@ enum nv_host_type GENERIC, NFORCE2, NFORCE3, - CK804 + CK804, + MCP51, + MCP55 }; static struct pci_device_id nv_pci_tbl[] = { @@ -134,9 +142,18 @@ static struct pci_device_id nv_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP51 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP51 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP55 }, { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC }, + { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_RAID<<8, 0xffff00, GENERIC }, { 0, } /* terminate list */ }; -- cgit v1.2.1 From d2ae1d2ff9282ca061b6f5244eee4c28ee2b3ffa Mon Sep 17 00:00:00 2001 From: Chuck Ebbert <76306.1226@compuserve.com> Date: Sat, 2 Jul 2005 21:28:21 -0400 Subject: [PATCH] loopback: #ifdef the TSO code This patch #ifdefs the TSO code in the loopback driver. Saves ~800 bytes of text on i386 and avoids a conditional in the fast path. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Jeff Garzik --- drivers/net/loopback.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c index b33111e21313..c1e3cee8ec33 100644 --- a/drivers/net/loopback.c +++ b/drivers/net/loopback.c @@ -68,6 +68,7 @@ static DEFINE_PER_CPU(struct net_device_stats, loopback_stats); * of largesending device modulo TCP checksum, which is ignored for loopback. */ +#ifdef LOOPBACK_TSO static void emulate_large_send_offload(struct sk_buff *skb) { struct iphdr *iph = skb->nh.iph; @@ -119,6 +120,7 @@ static void emulate_large_send_offload(struct sk_buff *skb) dev_kfree_skb(skb); } +#endif /* LOOPBACK_TSO */ /* * The higher levels take care of making this non-reentrant (it's @@ -136,6 +138,7 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev) skb->ip_summed = CHECKSUM_UNNECESSARY; #endif +#ifdef LOOPBACK_TSO if (skb_shinfo(skb)->tso_size) { BUG_ON(skb->protocol != htons(ETH_P_IP)); BUG_ON(skb->nh.iph->protocol != IPPROTO_TCP); @@ -143,7 +146,7 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev) emulate_large_send_offload(skb); return 0; } - +#endif dev->last_rx = jiffies; lb_stats = &per_cpu(loopback_stats, get_cpu()); @@ -209,6 +212,9 @@ struct net_device loopback_dev = { .rebuild_header = eth_rebuild_header, .flags = IFF_LOOPBACK, .features = NETIF_F_SG|NETIF_F_FRAGLIST +#ifdef LOOPBACK_TSO + |NETIF_F_TSO +#endif |NETIF_F_NO_CSUM|NETIF_F_HIGHDMA |NETIF_F_LLTX, .ethtool_ops = &loopback_ethtool_ops, -- cgit v1.2.1 From 18c16c696e8b2323a306af455c686df15c717206 Mon Sep 17 00:00:00 2001 From: Chuck Ebbert <76306.1226@compuserve.com> Date: Sat, 2 Jul 2005 21:28:22 -0400 Subject: [PATCH] loopback: optimize stats This patch slightly optimizes the loopback driver's stats update. Saves two loads, one add and one increment per packet sent. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Jeff Garzik --- drivers/net/loopback.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c index c1e3cee8ec33..dba76169e774 100644 --- a/drivers/net/loopback.c +++ b/drivers/net/loopback.c @@ -151,9 +151,9 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev) lb_stats = &per_cpu(loopback_stats, get_cpu()); lb_stats->rx_bytes += skb->len; - lb_stats->tx_bytes += skb->len; + lb_stats->tx_bytes = lb_stats->rx_bytes; lb_stats->rx_packets++; - lb_stats->tx_packets++; + lb_stats->tx_packets = lb_stats->rx_packets; put_cpu(); netif_rx(skb); -- cgit v1.2.1 From 0e920bfb0395fb16909fb98cb6e2782a1c6b73c7 Mon Sep 17 00:00:00 2001 From: Chuck Ebbert <76306.1226@compuserve.com> Date: Sat, 2 Jul 2005 21:28:23 -0400 Subject: [PATCH] loopback: whitespace cleanup Whitespace cleanup for loopback driver. Hopefully it fixes the last few annoyances. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Jeff Garzik --- drivers/net/loopback.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c index dba76169e774..2cb6f1c8c6ed 100644 --- a/drivers/net/loopback.c +++ b/drivers/net/loopback.c @@ -132,8 +132,8 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev) skb_orphan(skb); - skb->protocol=eth_type_trans(skb,dev); - skb->dev=dev; + skb->protocol = eth_type_trans(skb,dev); + skb->dev = dev; #ifndef LOOPBACK_MUST_CHECKSUM skb->ip_summed = CHECKSUM_UNNECESSARY; #endif @@ -211,12 +211,12 @@ struct net_device loopback_dev = { .type = ARPHRD_LOOPBACK, /* 0x0001*/ .rebuild_header = eth_rebuild_header, .flags = IFF_LOOPBACK, - .features = NETIF_F_SG|NETIF_F_FRAGLIST + .features = NETIF_F_SG | NETIF_F_FRAGLIST #ifdef LOOPBACK_TSO - |NETIF_F_TSO + | NETIF_F_TSO #endif - |NETIF_F_NO_CSUM|NETIF_F_HIGHDMA - |NETIF_F_LLTX, + | NETIF_F_NO_CSUM | NETIF_F_HIGHDMA + | NETIF_F_LLTX, .ethtool_ops = &loopback_ethtool_ops, }; -- cgit v1.2.1 From d81c0983de80c956cf37835b0d35adb3ab4bb03a Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Sun, 31 Jul 2005 18:20:30 +0200 Subject: [PATCH] forcedeth: Jumbo Frame Support This is a multi-part message in MIME format. Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 125 +++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 107 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 64f0f697c958..91f09e583cea 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -85,6 +85,7 @@ * 0.33: 16 May 2005: Support for MCP51 added. * 0.34: 18 Jun 2005: Add DEV_NEED_LINKTIMER to all nForce nics. * 0.35: 26 Jun 2005: Support for MCP55 added. + * 0.36: 28 Jul 2005: Add jumbo frame support. * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -96,7 +97,7 @@ * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few * superfluous timer interrupts from the nic. */ -#define FORCEDETH_VERSION "0.35" +#define FORCEDETH_VERSION "0.36" #define DRV_NAME "forcedeth" #include @@ -379,9 +380,13 @@ struct ring_desc { #define TX_LIMIT_START 62 /* rx/tx mac addr + type + vlan + align + slack*/ -#define RX_NIC_BUFSIZE (ETH_DATA_LEN + 64) -/* even more slack */ -#define RX_ALLOC_BUFSIZE (ETH_DATA_LEN + 128) +#define NV_RX_HEADERS (64) +/* even more slack. */ +#define NV_RX_ALLOC_PAD (64) + +/* maximum mtu size */ +#define NV_PKTLIMIT_1 ETH_DATA_LEN /* hard limit not known */ +#define NV_PKTLIMIT_2 9100 /* Actual limit according to NVidia: 9202 */ #define OOM_REFILL (1+HZ/20) #define POLL_WAIT (1+HZ/100) @@ -473,6 +478,7 @@ struct fe_priv { struct sk_buff *rx_skbuff[RX_RING]; dma_addr_t rx_dma[RX_RING]; unsigned int rx_buf_sz; + unsigned int pkt_limit; struct timer_list oom_kick; struct timer_list nic_poll; @@ -792,7 +798,7 @@ static int nv_alloc_rx(struct net_device *dev) nr = refill_rx % RX_RING; if (np->rx_skbuff[nr] == NULL) { - skb = dev_alloc_skb(RX_ALLOC_BUFSIZE); + skb = dev_alloc_skb(np->rx_buf_sz + NV_RX_ALLOC_PAD); if (!skb) break; @@ -805,7 +811,7 @@ static int nv_alloc_rx(struct net_device *dev) PCI_DMA_FROMDEVICE); np->rx_ring[nr].PacketBuffer = cpu_to_le32(np->rx_dma[nr]); wmb(); - np->rx_ring[nr].FlagLen = cpu_to_le32(RX_NIC_BUFSIZE | NV_RX_AVAIL); + np->rx_ring[nr].FlagLen = cpu_to_le32(np->rx_buf_sz | NV_RX_AVAIL); dprintk(KERN_DEBUG "%s: nv_alloc_rx: Packet %d marked as Available\n", dev->name, refill_rx); refill_rx++; @@ -831,19 +837,31 @@ static void nv_do_rx_refill(unsigned long data) enable_irq(dev->irq); } -static int nv_init_ring(struct net_device *dev) +static void nv_init_rx(struct net_device *dev) { struct fe_priv *np = get_nvpriv(dev); int i; - np->next_tx = np->nic_tx = 0; - for (i = 0; i < TX_RING; i++) - np->tx_ring[i].FlagLen = 0; - np->cur_rx = RX_RING; np->refill_rx = 0; for (i = 0; i < RX_RING; i++) np->rx_ring[i].FlagLen = 0; +} + +static void nv_init_tx(struct net_device *dev) +{ + struct fe_priv *np = get_nvpriv(dev); + int i; + + np->next_tx = np->nic_tx = 0; + for (i = 0; i < TX_RING; i++) + np->tx_ring[i].FlagLen = 0; +} + +static int nv_init_ring(struct net_device *dev) +{ + nv_init_tx(dev); + nv_init_rx(dev); return nv_alloc_rx(dev); } @@ -1207,15 +1225,82 @@ next_pkt: } } +static void set_bufsize(struct net_device *dev) +{ + struct fe_priv *np = netdev_priv(dev); + + if (dev->mtu <= ETH_DATA_LEN) + np->rx_buf_sz = ETH_DATA_LEN + NV_RX_HEADERS; + else + np->rx_buf_sz = dev->mtu + NV_RX_HEADERS; +} + /* * nv_change_mtu: dev->change_mtu function * Called with dev_base_lock held for read. */ static int nv_change_mtu(struct net_device *dev, int new_mtu) { - if (new_mtu > ETH_DATA_LEN) + struct fe_priv *np = get_nvpriv(dev); + int old_mtu; + + if (new_mtu < 64 || new_mtu > np->pkt_limit) return -EINVAL; + + old_mtu = dev->mtu; dev->mtu = new_mtu; + + /* return early if the buffer sizes will not change */ + if (old_mtu <= ETH_DATA_LEN && new_mtu <= ETH_DATA_LEN) + return 0; + if (old_mtu == new_mtu) + return 0; + + /* synchronized against open : rtnl_lock() held by caller */ + if (netif_running(dev)) { + u8 *base = get_hwbase(dev); + /* + * It seems that the nic preloads valid ring entries into an + * internal buffer. The procedure for flushing everything is + * guessed, there is probably a simpler approach. + * Changing the MTU is a rare event, it shouldn't matter. + */ + disable_irq(dev->irq); + spin_lock_bh(&dev->xmit_lock); + spin_lock(&np->lock); + /* stop engines */ + nv_stop_rx(dev); + nv_stop_tx(dev); + nv_txrx_reset(dev); + /* drain rx queue */ + nv_drain_rx(dev); + nv_drain_tx(dev); + /* reinit driver view of the rx queue */ + nv_init_rx(dev); + nv_init_tx(dev); + /* alloc new rx buffers */ + set_bufsize(dev); + if (nv_alloc_rx(dev)) { + if (!np->in_shutdown) + mod_timer(&np->oom_kick, jiffies + OOM_REFILL); + } + /* reinit nic view of the rx queue */ + writel(np->rx_buf_sz, base + NvRegOffloadConfig); + writel((u32) np->ring_addr, base + NvRegRxRingPhysAddr); + writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr); + writel( ((RX_RING-1) << NVREG_RINGSZ_RXSHIFT) + ((TX_RING-1) << NVREG_RINGSZ_TXSHIFT), + base + NvRegRingSizes); + pci_push(base); + writel(NVREG_TXRXCTL_KICK|np->desc_ver, get_hwbase(dev) + NvRegTxRxControl); + pci_push(base); + + /* restart rx engine */ + nv_start_rx(dev); + nv_start_tx(dev); + spin_unlock(&np->lock); + spin_unlock_bh(&dev->xmit_lock); + enable_irq(dev->irq); + } return 0; } @@ -1792,6 +1877,7 @@ static int nv_open(struct net_device *dev) writel(0, base + NvRegAdapterControl); /* 2) initialize descriptor rings */ + set_bufsize(dev); oom = nv_init_ring(dev); writel(0, base + NvRegLinkSpeed); @@ -1837,7 +1923,7 @@ static int nv_open(struct net_device *dev) writel(NVREG_MISC1_FORCE | NVREG_MISC1_HD, base + NvRegMisc1); writel(readl(base + NvRegTransmitterStatus), base + NvRegTransmitterStatus); writel(NVREG_PFF_ALWAYS, base + NvRegPacketFilterFlags); - writel(NVREG_OFFLOAD_NORMAL, base + NvRegOffloadConfig); + writel(np->rx_buf_sz, base + NvRegOffloadConfig); writel(readl(base + NvRegReceiverStatus), base + NvRegReceiverStatus); get_random_bytes(&i, sizeof(i)); @@ -2007,13 +2093,16 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i /* handle different descriptor versions */ if (pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_1 || - pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_2 || - pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_3 || - pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_12 || - pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_13) + pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_2 || + pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_3 || + pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_12 || + pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_13) { np->desc_ver = DESC_VER_1; - else + np->pkt_limit = NV_PKTLIMIT_1; + } else { np->desc_ver = DESC_VER_2; + np->pkt_limit = NV_PKTLIMIT_2; + } err = -ENOMEM; np->base = ioremap(addr, NV_PCI_REGSZ); -- cgit v1.2.1 From dc8216c192795b62f30ca34299fb79e897438372 Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Sun, 31 Jul 2005 18:26:05 +0200 Subject: [PATCH] forcedeth: Improve ethtool support This is a multi-part message in MIME format. Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 171 +++++++++++++++++++++++++----------------------- 1 file changed, 90 insertions(+), 81 deletions(-) (limited to 'drivers') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 91f09e583cea..9c49c5ec89bf 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -85,7 +85,8 @@ * 0.33: 16 May 2005: Support for MCP51 added. * 0.34: 18 Jun 2005: Add DEV_NEED_LINKTIMER to all nForce nics. * 0.35: 26 Jun 2005: Support for MCP55 added. - * 0.36: 28 Jul 2005: Add jumbo frame support. + * 0.36: 28 Jun 2005: Add jumbo frame support. + * 0.37: 10 Jul 2005: Additional ethtool support, cleanup of pci id list * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -97,7 +98,7 @@ * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few * superfluous timer interrupts from the nic. */ -#define FORCEDETH_VERSION "0.36" +#define FORCEDETH_VERSION "0.37" #define DRV_NAME "forcedeth" #include @@ -137,6 +138,7 @@ #define DEV_IRQMASK_2 0x0004 /* use NVREG_IRQMASK_WANTED_2 for irq mask */ #define DEV_NEED_TIMERIRQ 0x0008 /* set the timer irq flag in the irq mask */ #define DEV_NEED_LINKTIMER 0x0010 /* poll link settings. Relies on the timer irq */ +#define DEV_HAS_LARGEDESC 0x0020 /* device supports jumbo frames and needs packet format 2 */ enum { NvRegIrqStatus = 0x000, @@ -1846,6 +1848,50 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) return 0; } +#define FORCEDETH_REGS_VER 1 +#define FORCEDETH_REGS_SIZE 0x400 /* 256 32-bit registers */ + +static int nv_get_regs_len(struct net_device *dev) +{ + return FORCEDETH_REGS_SIZE; +} + +static void nv_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf) +{ + struct fe_priv *np = get_nvpriv(dev); + u8 __iomem *base = get_hwbase(dev); + u32 *rbuf = buf; + int i; + + regs->version = FORCEDETH_REGS_VER; + spin_lock_irq(&np->lock); + for (i=0;ilock); +} + +static int nv_nway_reset(struct net_device *dev) +{ + struct fe_priv *np = get_nvpriv(dev); + int ret; + + spin_lock_irq(&np->lock); + if (np->autoneg) { + int bmcr; + + bmcr = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ); + bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART); + mii_rw(dev, np->phyaddr, MII_BMCR, bmcr); + + ret = 0; + } else { + ret = -EINVAL; + } + spin_unlock_irq(&np->lock); + + return ret; +} + static struct ethtool_ops ops = { .get_drvinfo = nv_get_drvinfo, .get_link = ethtool_op_get_link, @@ -1853,6 +1899,9 @@ static struct ethtool_ops ops = { .set_wol = nv_set_wol, .get_settings = nv_get_settings, .set_settings = nv_set_settings, + .get_regs_len = nv_get_regs_len, + .get_regs = nv_get_regs, + .nway_reset = nv_nway_reset, }; static int nv_open(struct net_device *dev) @@ -2092,18 +2141,13 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i } /* handle different descriptor versions */ - if (pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_1 || - pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_2 || - pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_3 || - pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_12 || - pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_13) { - np->desc_ver = DESC_VER_1; - np->pkt_limit = NV_PKTLIMIT_1; - } else { + np->desc_ver = DESC_VER_1; + np->pkt_limit = NV_PKTLIMIT_1; + if (id->driver_data & DEV_HAS_LARGEDESC) { np->desc_ver = DESC_VER_2; np->pkt_limit = NV_PKTLIMIT_2; } - + err = -ENOMEM; np->base = ioremap(addr, NV_PCI_REGSZ); if (!np->base) @@ -2284,109 +2328,74 @@ static void __devexit nv_remove(struct pci_dev *pci_dev) static struct pci_device_id pci_tbl[] = { { /* nForce Ethernet Controller */ - .vendor = PCI_VENDOR_ID_NVIDIA, - .device = PCI_DEVICE_ID_NVIDIA_NVENET_1, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_1), .driver_data = DEV_IRQMASK_1|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, }, { /* nForce2 Ethernet Controller */ - .vendor = PCI_VENDOR_ID_NVIDIA, - .device = PCI_DEVICE_ID_NVIDIA_NVENET_2, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_2), .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, }, { /* nForce3 Ethernet Controller */ - .vendor = PCI_VENDOR_ID_NVIDIA, - .device = PCI_DEVICE_ID_NVIDIA_NVENET_3, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_3), .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, }, { /* nForce3 Ethernet Controller */ - .vendor = PCI_VENDOR_ID_NVIDIA, - .device = PCI_DEVICE_ID_NVIDIA_NVENET_4, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_4), + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| + DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, { /* nForce3 Ethernet Controller */ - .vendor = PCI_VENDOR_ID_NVIDIA, - .device = PCI_DEVICE_ID_NVIDIA_NVENET_5, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_5), + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| + DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, { /* nForce3 Ethernet Controller */ - .vendor = PCI_VENDOR_ID_NVIDIA, - .device = PCI_DEVICE_ID_NVIDIA_NVENET_6, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_6), + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| + DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, { /* nForce3 Ethernet Controller */ - .vendor = PCI_VENDOR_ID_NVIDIA, - .device = PCI_DEVICE_ID_NVIDIA_NVENET_7, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_7), + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| + DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, { /* CK804 Ethernet Controller */ - .vendor = PCI_VENDOR_ID_NVIDIA, - .device = PCI_DEVICE_ID_NVIDIA_NVENET_8, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_8), + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| + DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, { /* CK804 Ethernet Controller */ - .vendor = PCI_VENDOR_ID_NVIDIA, - .device = PCI_DEVICE_ID_NVIDIA_NVENET_9, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_9), + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| + DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, { /* MCP04 Ethernet Controller */ - .vendor = PCI_VENDOR_ID_NVIDIA, - .device = PCI_DEVICE_ID_NVIDIA_NVENET_10, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_10), + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| + DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, { /* MCP04 Ethernet Controller */ - .vendor = PCI_VENDOR_ID_NVIDIA, - .device = PCI_DEVICE_ID_NVIDIA_NVENET_11, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_11), + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| + DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, { /* MCP51 Ethernet Controller */ - .vendor = PCI_VENDOR_ID_NVIDIA, - .device = PCI_DEVICE_ID_NVIDIA_NVENET_12, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_12), .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, }, { /* MCP51 Ethernet Controller */ - .vendor = PCI_VENDOR_ID_NVIDIA, - .device = PCI_DEVICE_ID_NVIDIA_NVENET_13, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_13), .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, }, { /* MCP55 Ethernet Controller */ - .vendor = PCI_VENDOR_ID_NVIDIA, - .device = PCI_DEVICE_ID_NVIDIA_NVENET_14, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_14), + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| + DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, { /* MCP55 Ethernet Controller */ - .vendor = PCI_VENDOR_ID_NVIDIA, - .device = PCI_DEVICE_ID_NVIDIA_NVENET_15, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15), + .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| + DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, {0,}, }; -- cgit v1.2.1 From c2dba06dae7d6c4d15b83ea12d8c601cffd0aee9 Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Sun, 31 Jul 2005 18:29:47 +0200 Subject: [PATCH] forcedeth: rewritten tx irq handling This is a multi-part message in MIME format. Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 111 +++++++++++++++++++++++++++--------------------- 1 file changed, 63 insertions(+), 48 deletions(-) (limited to 'drivers') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 9c49c5ec89bf..746ad0178f8c 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -87,6 +87,8 @@ * 0.35: 26 Jun 2005: Support for MCP55 added. * 0.36: 28 Jun 2005: Add jumbo frame support. * 0.37: 10 Jul 2005: Additional ethtool support, cleanup of pci id list + * 0.38: 16 Jul 2005: tx irq rewrite: Use global flags instead of + * per-packet flags. * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -98,7 +100,7 @@ * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few * superfluous timer interrupts from the nic. */ -#define FORCEDETH_VERSION "0.37" +#define FORCEDETH_VERSION "0.38" #define DRV_NAME "forcedeth" #include @@ -133,12 +135,9 @@ * Hardware access: */ -#define DEV_NEED_LASTPACKET1 0x0001 /* set LASTPACKET1 in tx flags */ -#define DEV_IRQMASK_1 0x0002 /* use NVREG_IRQMASK_WANTED_1 for irq mask */ -#define DEV_IRQMASK_2 0x0004 /* use NVREG_IRQMASK_WANTED_2 for irq mask */ -#define DEV_NEED_TIMERIRQ 0x0008 /* set the timer irq flag in the irq mask */ -#define DEV_NEED_LINKTIMER 0x0010 /* poll link settings. Relies on the timer irq */ -#define DEV_HAS_LARGEDESC 0x0020 /* device supports jumbo frames and needs packet format 2 */ +#define DEV_NEED_TIMERIRQ 0x0001 /* set the timer irq flag in the irq mask */ +#define DEV_NEED_LINKTIMER 0x0002 /* poll link settings. Relies on the timer irq */ +#define DEV_HAS_LARGEDESC 0x0004 /* device supports jumbo frames and needs packet format 2 */ enum { NvRegIrqStatus = 0x000, @@ -149,13 +148,16 @@ enum { #define NVREG_IRQ_RX 0x0002 #define NVREG_IRQ_RX_NOBUF 0x0004 #define NVREG_IRQ_TX_ERR 0x0008 -#define NVREG_IRQ_TX2 0x0010 +#define NVREG_IRQ_TX_OK 0x0010 #define NVREG_IRQ_TIMER 0x0020 #define NVREG_IRQ_LINK 0x0040 +#define NVREG_IRQ_TX_ERROR 0x0080 #define NVREG_IRQ_TX1 0x0100 -#define NVREG_IRQMASK_WANTED_1 0x005f -#define NVREG_IRQMASK_WANTED_2 0x0147 -#define NVREG_IRQ_UNKNOWN (~(NVREG_IRQ_RX_ERROR|NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF|NVREG_IRQ_TX_ERR|NVREG_IRQ_TX2|NVREG_IRQ_TIMER|NVREG_IRQ_LINK|NVREG_IRQ_TX1)) +#define NVREG_IRQMASK_WANTED 0x00df + +#define NVREG_IRQ_UNKNOWN (~(NVREG_IRQ_RX_ERROR|NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF|NVREG_IRQ_TX_ERR| \ + NVREG_IRQ_TX_OK|NVREG_IRQ_TIMER|NVREG_IRQ_LINK|NVREG_IRQ_TX_ERROR| \ + NVREG_IRQ_TX1)) NvRegUnknownSetupReg6 = 0x008, #define NVREG_UNKSETUP6_VAL 3 @@ -296,7 +298,7 @@ struct ring_desc { #define NV_TX_LASTPACKET (1<<16) #define NV_TX_RETRYERROR (1<<19) -#define NV_TX_LASTPACKET1 (1<<24) +#define NV_TX_FORCED_INTERRUPT (1<<24) #define NV_TX_DEFERRED (1<<26) #define NV_TX_CARRIERLOST (1<<27) #define NV_TX_LATECOLLISION (1<<28) @@ -306,7 +308,7 @@ struct ring_desc { #define NV_TX2_LASTPACKET (1<<29) #define NV_TX2_RETRYERROR (1<<18) -#define NV_TX2_LASTPACKET1 (1<<23) +#define NV_TX2_FORCED_INTERRUPT (1<<30) #define NV_TX2_DEFERRED (1<<25) #define NV_TX2_CARRIERLOST (1<<26) #define NV_TX2_LATECOLLISION (1<<27) @@ -1013,9 +1015,39 @@ static void nv_tx_timeout(struct net_device *dev) struct fe_priv *np = get_nvpriv(dev); u8 __iomem *base = get_hwbase(dev); - dprintk(KERN_DEBUG "%s: Got tx_timeout. irq: %08x\n", dev->name, + printk(KERN_INFO "%s: Got tx_timeout. irq: %08x\n", dev->name, readl(base + NvRegIrqStatus) & NVREG_IRQSTAT_MASK); + { + int i; + + printk(KERN_INFO "%s: Ring at %lx: next %d nic %d\n", + dev->name, (unsigned long)np->ring_addr, + np->next_tx, np->nic_tx); + printk(KERN_INFO "%s: Dumping tx registers\n", dev->name); + for (i=0;i<0x400;i+= 32) { + printk(KERN_INFO "%3x: %08x %08x %08x %08x %08x %08x %08x %08x\n", + i, + readl(base + i + 0), readl(base + i + 4), + readl(base + i + 8), readl(base + i + 12), + readl(base + i + 16), readl(base + i + 20), + readl(base + i + 24), readl(base + i + 28)); + } + printk(KERN_INFO "%s: Dumping tx ring\n", dev->name); + for (i=0;itx_ring[i].PacketBuffer), + le32_to_cpu(np->tx_ring[i].FlagLen), + le32_to_cpu(np->tx_ring[i+1].PacketBuffer), + le32_to_cpu(np->tx_ring[i+1].FlagLen), + le32_to_cpu(np->tx_ring[i+2].PacketBuffer), + le32_to_cpu(np->tx_ring[i+2].FlagLen), + le32_to_cpu(np->tx_ring[i+3].PacketBuffer), + le32_to_cpu(np->tx_ring[i+3].FlagLen)); + } + } + spin_lock_irq(&np->lock); /* 1) stop tx engine */ @@ -1557,7 +1589,7 @@ static irqreturn_t nv_nic_irq(int foo, void *data, struct pt_regs *regs) if (!(events & np->irqmask)) break; - if (events & (NVREG_IRQ_TX1|NVREG_IRQ_TX2|NVREG_IRQ_TX_ERR)) { + if (events & (NVREG_IRQ_TX1|NVREG_IRQ_TX_OK|NVREG_IRQ_TX_ERROR|NVREG_IRQ_TX_ERR)) { spin_lock(&np->lock); nv_tx_done(dev); spin_unlock(&np->lock); @@ -2213,17 +2245,10 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i if (np->desc_ver == DESC_VER_1) { np->tx_flags = NV_TX_LASTPACKET|NV_TX_VALID; - if (id->driver_data & DEV_NEED_LASTPACKET1) - np->tx_flags |= NV_TX_LASTPACKET1; } else { np->tx_flags = NV_TX2_LASTPACKET|NV_TX2_VALID; - if (id->driver_data & DEV_NEED_LASTPACKET1) - np->tx_flags |= NV_TX2_LASTPACKET1; } - if (id->driver_data & DEV_IRQMASK_1) - np->irqmask = NVREG_IRQMASK_WANTED_1; - if (id->driver_data & DEV_IRQMASK_2) - np->irqmask = NVREG_IRQMASK_WANTED_2; + np->irqmask = NVREG_IRQMASK_WANTED; if (id->driver_data & DEV_NEED_TIMERIRQ) np->irqmask |= NVREG_IRQ_TIMER; if (id->driver_data & DEV_NEED_LINKTIMER) { @@ -2329,73 +2354,63 @@ static void __devexit nv_remove(struct pci_dev *pci_dev) static struct pci_device_id pci_tbl[] = { { /* nForce Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_1), - .driver_data = DEV_IRQMASK_1|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, }, { /* nForce2 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_2), - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, }, { /* nForce3 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_3), - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, }, { /* nForce3 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_4), - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| - DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, { /* nForce3 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_5), - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| - DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, { /* nForce3 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_6), - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| - DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, { /* nForce3 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_7), - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| - DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, { /* CK804 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_8), - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| - DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, { /* CK804 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_9), - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| - DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, { /* MCP04 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_10), - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| - DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, { /* MCP04 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_11), - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| - DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, { /* MCP51 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_12), - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, }, { /* MCP51 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_13), - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, }, { /* MCP55 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_14), - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| - DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, { /* MCP55 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15), - .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ| - DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, }, {0,}, }; -- cgit v1.2.1 From ee73362cdd7d9b8166424f5f9e3176c629ac5cb2 Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Sun, 31 Jul 2005 18:32:26 +0200 Subject: [PATCH] forcedeth: 64-bit DMA support This is a multi-part message in MIME format. Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 210 +++++++++++++++++++++++++++++++++++++----------- 1 file changed, 161 insertions(+), 49 deletions(-) (limited to 'drivers') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 746ad0178f8c..4d38acbac4ef 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -89,6 +89,7 @@ * 0.37: 10 Jul 2005: Additional ethtool support, cleanup of pci id list * 0.38: 16 Jul 2005: tx irq rewrite: Use global flags instead of * per-packet flags. + * 0.39: 18 Jul 2005: Add 64bit descriptor support. * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -100,7 +101,7 @@ * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few * superfluous timer interrupts from the nic. */ -#define FORCEDETH_VERSION "0.38" +#define FORCEDETH_VERSION "0.39" #define DRV_NAME "forcedeth" #include @@ -138,6 +139,7 @@ #define DEV_NEED_TIMERIRQ 0x0001 /* set the timer irq flag in the irq mask */ #define DEV_NEED_LINKTIMER 0x0002 /* poll link settings. Relies on the timer irq */ #define DEV_HAS_LARGEDESC 0x0004 /* device supports jumbo frames and needs packet format 2 */ +#define DEV_HAS_HIGH_DMA 0x0008 /* device supports 64bit dma */ enum { NvRegIrqStatus = 0x000, @@ -291,6 +293,18 @@ struct ring_desc { u32 FlagLen; }; +struct ring_desc_ex { + u32 PacketBufferHigh; + u32 PacketBufferLow; + u32 Reserved; + u32 FlagLen; +}; + +typedef union _ring_type { + struct ring_desc* orig; + struct ring_desc_ex* ex; +} ring_type; + #define FLAG_MASK_V1 0xffff0000 #define FLAG_MASK_V2 0xffffc000 #define LEN_MASK_V1 (0xffffffff ^ FLAG_MASK_V1) @@ -405,6 +419,7 @@ struct ring_desc { */ #define DESC_VER_1 0x0 #define DESC_VER_2 (0x02100|NVREG_TXRXCTL_RXCHECK) +#define DESC_VER_3 (0x02200|NVREG_TXRXCTL_RXCHECK) /* PHY defines */ #define PHY_OUI_MARVELL 0x5043 @@ -477,7 +492,7 @@ struct fe_priv { /* rx specific fields. * Locking: Within irq hander or disable_irq+spin_lock(&np->lock); */ - struct ring_desc *rx_ring; + ring_type rx_ring; unsigned int cur_rx, refill_rx; struct sk_buff *rx_skbuff[RX_RING]; dma_addr_t rx_dma[RX_RING]; @@ -494,7 +509,7 @@ struct fe_priv { /* * tx specific fields. */ - struct ring_desc *tx_ring; + ring_type tx_ring; unsigned int next_tx, nic_tx; struct sk_buff *tx_skbuff[TX_RING]; dma_addr_t tx_dma[TX_RING]; @@ -529,6 +544,11 @@ static inline u32 nv_descr_getlength(struct ring_desc *prd, u32 v) & ((v == DESC_VER_1) ? LEN_MASK_V1 : LEN_MASK_V2); } +static inline u32 nv_descr_getlength_ex(struct ring_desc_ex *prd, u32 v) +{ + return le32_to_cpu(prd->FlagLen) & LEN_MASK_V2; +} + static int reg_delay(struct net_device *dev, int offset, u32 mask, u32 target, int delay, int delaymax, const char *msg) { @@ -813,9 +833,16 @@ static int nv_alloc_rx(struct net_device *dev) } np->rx_dma[nr] = pci_map_single(np->pci_dev, skb->data, skb->len, PCI_DMA_FROMDEVICE); - np->rx_ring[nr].PacketBuffer = cpu_to_le32(np->rx_dma[nr]); - wmb(); - np->rx_ring[nr].FlagLen = cpu_to_le32(np->rx_buf_sz | NV_RX_AVAIL); + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { + np->rx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->rx_dma[nr]); + wmb(); + np->rx_ring.orig[nr].FlagLen = cpu_to_le32(np->rx_buf_sz | NV_RX_AVAIL); + } else { + np->rx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->rx_dma[nr]) >> 32; + np->rx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->rx_dma[nr]) & 0x0FFFFFFFF; + wmb(); + np->rx_ring.ex[nr].FlagLen = cpu_to_le32(np->rx_buf_sz | NV_RX2_AVAIL); + } dprintk(KERN_DEBUG "%s: nv_alloc_rx: Packet %d marked as Available\n", dev->name, refill_rx); refill_rx++; @@ -849,7 +876,10 @@ static void nv_init_rx(struct net_device *dev) np->cur_rx = RX_RING; np->refill_rx = 0; for (i = 0; i < RX_RING; i++) - np->rx_ring[i].FlagLen = 0; + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) + np->rx_ring.orig[i].FlagLen = 0; + else + np->rx_ring.ex[i].FlagLen = 0; } static void nv_init_tx(struct net_device *dev) @@ -859,7 +889,10 @@ static void nv_init_tx(struct net_device *dev) np->next_tx = np->nic_tx = 0; for (i = 0; i < TX_RING; i++) - np->tx_ring[i].FlagLen = 0; + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) + np->tx_ring.orig[i].FlagLen = 0; + else + np->tx_ring.ex[i].FlagLen = 0; } static int nv_init_ring(struct net_device *dev) @@ -874,7 +907,10 @@ static void nv_drain_tx(struct net_device *dev) struct fe_priv *np = get_nvpriv(dev); int i; for (i = 0; i < TX_RING; i++) { - np->tx_ring[i].FlagLen = 0; + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) + np->tx_ring.orig[i].FlagLen = 0; + else + np->tx_ring.ex[i].FlagLen = 0; if (np->tx_skbuff[i]) { pci_unmap_single(np->pci_dev, np->tx_dma[i], np->tx_skbuff[i]->len, @@ -891,7 +927,10 @@ static void nv_drain_rx(struct net_device *dev) struct fe_priv *np = get_nvpriv(dev); int i; for (i = 0; i < RX_RING; i++) { - np->rx_ring[i].FlagLen = 0; + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) + np->rx_ring.orig[i].FlagLen = 0; + else + np->rx_ring.ex[i].FlagLen = 0; wmb(); if (np->rx_skbuff[i]) { pci_unmap_single(np->pci_dev, np->rx_dma[i], @@ -922,11 +961,19 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) np->tx_dma[nr] = pci_map_single(np->pci_dev, skb->data,skb->len, PCI_DMA_TODEVICE); - np->tx_ring[nr].PacketBuffer = cpu_to_le32(np->tx_dma[nr]); + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) + np->tx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->tx_dma[nr]); + else { + np->tx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->tx_dma[nr]) >> 32; + np->tx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF; + } spin_lock_irq(&np->lock); wmb(); - np->tx_ring[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags ); + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) + np->tx_ring.orig[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags ); + else + np->tx_ring.ex[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags ); dprintk(KERN_DEBUG "%s: nv_start_xmit: packet packet %d queued for transmission.\n", dev->name, np->next_tx); { @@ -964,7 +1011,10 @@ static void nv_tx_done(struct net_device *dev) while (np->nic_tx != np->next_tx) { i = np->nic_tx % TX_RING; - Flags = le32_to_cpu(np->tx_ring[i].FlagLen); + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) + Flags = le32_to_cpu(np->tx_ring.orig[i].FlagLen); + else + Flags = le32_to_cpu(np->tx_ring.ex[i].FlagLen); dprintk(KERN_DEBUG "%s: nv_tx_done: looking at packet %d, Flags 0x%x.\n", dev->name, np->nic_tx, Flags); @@ -1035,16 +1085,33 @@ static void nv_tx_timeout(struct net_device *dev) } printk(KERN_INFO "%s: Dumping tx ring\n", dev->name); for (i=0;itx_ring[i].PacketBuffer), - le32_to_cpu(np->tx_ring[i].FlagLen), - le32_to_cpu(np->tx_ring[i+1].PacketBuffer), - le32_to_cpu(np->tx_ring[i+1].FlagLen), - le32_to_cpu(np->tx_ring[i+2].PacketBuffer), - le32_to_cpu(np->tx_ring[i+2].FlagLen), - le32_to_cpu(np->tx_ring[i+3].PacketBuffer), - le32_to_cpu(np->tx_ring[i+3].FlagLen)); + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { + printk(KERN_INFO "%03x: %08x %08x // %08x %08x // %08x %08x // %08x %08x\n", + i, + le32_to_cpu(np->tx_ring.orig[i].PacketBuffer), + le32_to_cpu(np->tx_ring.orig[i].FlagLen), + le32_to_cpu(np->tx_ring.orig[i+1].PacketBuffer), + le32_to_cpu(np->tx_ring.orig[i+1].FlagLen), + le32_to_cpu(np->tx_ring.orig[i+2].PacketBuffer), + le32_to_cpu(np->tx_ring.orig[i+2].FlagLen), + le32_to_cpu(np->tx_ring.orig[i+3].PacketBuffer), + le32_to_cpu(np->tx_ring.orig[i+3].FlagLen)); + } else { + printk(KERN_INFO "%03x: %08x %08x %08x // %08x %08x %08x // %08x %08x %08x // %08x %08x %08x\n", + i, + le32_to_cpu(np->tx_ring.ex[i].PacketBufferHigh), + le32_to_cpu(np->tx_ring.ex[i].PacketBufferLow), + le32_to_cpu(np->tx_ring.ex[i].FlagLen), + le32_to_cpu(np->tx_ring.ex[i+1].PacketBufferHigh), + le32_to_cpu(np->tx_ring.ex[i+1].PacketBufferLow), + le32_to_cpu(np->tx_ring.ex[i+1].FlagLen), + le32_to_cpu(np->tx_ring.ex[i+2].PacketBufferHigh), + le32_to_cpu(np->tx_ring.ex[i+2].PacketBufferLow), + le32_to_cpu(np->tx_ring.ex[i+2].FlagLen), + le32_to_cpu(np->tx_ring.ex[i+3].PacketBufferHigh), + le32_to_cpu(np->tx_ring.ex[i+3].PacketBufferLow), + le32_to_cpu(np->tx_ring.ex[i+3].FlagLen)); + } } } @@ -1061,7 +1128,10 @@ static void nv_tx_timeout(struct net_device *dev) printk(KERN_DEBUG "%s: tx_timeout: dead entries!\n", dev->name); nv_drain_tx(dev); np->next_tx = np->nic_tx = 0; - writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr); + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) + writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr); + else + writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc_ex)), base + NvRegTxRingPhysAddr); netif_wake_queue(dev); } @@ -1136,8 +1206,13 @@ static void nv_rx_process(struct net_device *dev) break; /* we scanned the whole ring - do not continue */ i = np->cur_rx % RX_RING; - Flags = le32_to_cpu(np->rx_ring[i].FlagLen); - len = nv_descr_getlength(&np->rx_ring[i], np->desc_ver); + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { + Flags = le32_to_cpu(np->rx_ring.orig[i].FlagLen); + len = nv_descr_getlength(&np->rx_ring.orig[i], np->desc_ver); + } else { + Flags = le32_to_cpu(np->rx_ring.ex[i].FlagLen); + len = nv_descr_getlength_ex(&np->rx_ring.ex[i], np->desc_ver); + } dprintk(KERN_DEBUG "%s: nv_rx_process: looking at packet %d, Flags 0x%x.\n", dev->name, np->cur_rx, Flags); @@ -1321,7 +1396,10 @@ static int nv_change_mtu(struct net_device *dev, int new_mtu) /* reinit nic view of the rx queue */ writel(np->rx_buf_sz, base + NvRegOffloadConfig); writel((u32) np->ring_addr, base + NvRegRxRingPhysAddr); - writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr); + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) + writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr); + else + writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc_ex)), base + NvRegTxRingPhysAddr); writel( ((RX_RING-1) << NVREG_RINGSZ_RXSHIFT) + ((TX_RING-1) << NVREG_RINGSZ_TXSHIFT), base + NvRegRingSizes); pci_push(base); @@ -1982,7 +2060,10 @@ static int nv_open(struct net_device *dev) /* 4) give hw rings */ writel((u32) np->ring_addr, base + NvRegRxRingPhysAddr); - writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr); + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) + writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr); + else + writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc_ex)), base + NvRegTxRingPhysAddr); writel( ((RX_RING-1) << NVREG_RINGSZ_RXSHIFT) + ((TX_RING-1) << NVREG_RINGSZ_TXSHIFT), base + NvRegRingSizes); @@ -2173,24 +2254,48 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i } /* handle different descriptor versions */ - np->desc_ver = DESC_VER_1; - np->pkt_limit = NV_PKTLIMIT_1; - if (id->driver_data & DEV_HAS_LARGEDESC) { + if (id->driver_data & DEV_HAS_HIGH_DMA) { + /* packet format 3: supports 40-bit addressing */ + np->desc_ver = DESC_VER_3; + if (pci_set_dma_mask(pci_dev, 0x0000007fffffffffULL)) { + printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n", + pci_name(pci_dev)); + } + } else if (id->driver_data & DEV_HAS_LARGEDESC) { + /* packet format 2: supports jumbo frames */ np->desc_ver = DESC_VER_2; - np->pkt_limit = NV_PKTLIMIT_2; + } else { + /* original packet format */ + np->desc_ver = DESC_VER_1; } - + + np->pkt_limit = NV_PKTLIMIT_1; + if (id->driver_data & DEV_HAS_LARGEDESC) + np->pkt_limit = NV_PKTLIMIT_2; + err = -ENOMEM; np->base = ioremap(addr, NV_PCI_REGSZ); if (!np->base) goto out_relreg; dev->base_addr = (unsigned long)np->base; + dev->irq = pci_dev->irq; - np->rx_ring = pci_alloc_consistent(pci_dev, sizeof(struct ring_desc) * (RX_RING + TX_RING), - &np->ring_addr); - if (!np->rx_ring) - goto out_unmap; - np->tx_ring = &np->rx_ring[RX_RING]; + + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { + np->rx_ring.orig = pci_alloc_consistent(pci_dev, + sizeof(struct ring_desc) * (RX_RING + TX_RING), + &np->ring_addr); + if (!np->rx_ring.orig) + goto out_unmap; + np->tx_ring.orig = &np->rx_ring.orig[RX_RING]; + } else { + np->rx_ring.ex = pci_alloc_consistent(pci_dev, + sizeof(struct ring_desc_ex) * (RX_RING + TX_RING), + &np->ring_addr); + if (!np->rx_ring.ex) + goto out_unmap; + np->tx_ring.ex = &np->rx_ring.ex[RX_RING]; + } dev->open = nv_open; dev->stop = nv_close; @@ -2313,8 +2418,12 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i return 0; out_freering: - pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (RX_RING + TX_RING), - np->rx_ring, np->ring_addr); + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) + pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (RX_RING + TX_RING), + np->rx_ring.orig, np->ring_addr); + else + pci_free_consistent(np->pci_dev, sizeof(struct ring_desc_ex) * (RX_RING + TX_RING), + np->rx_ring.ex, np->ring_addr); pci_set_drvdata(pci_dev, NULL); out_unmap: iounmap(get_hwbase(dev)); @@ -2343,7 +2452,10 @@ static void __devexit nv_remove(struct pci_dev *pci_dev) writel(np->orig_mac[1], base + NvRegMacAddrB); /* free all structures */ - pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (RX_RING + TX_RING), np->rx_ring, np->ring_addr); + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) + pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (RX_RING + TX_RING), np->rx_ring.orig, np->ring_addr); + else + pci_free_consistent(np->pci_dev, sizeof(struct ring_desc_ex) * (RX_RING + TX_RING), np->rx_ring.ex, np->ring_addr); iounmap(get_hwbase(dev)); pci_release_regions(pci_dev); pci_disable_device(pci_dev); @@ -2382,35 +2494,35 @@ static struct pci_device_id pci_tbl[] = { }, { /* CK804 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_8), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA, }, { /* CK804 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_9), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA, }, { /* MCP04 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_10), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA, }, { /* MCP04 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_11), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA, }, { /* MCP51 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_12), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA, }, { /* MCP51 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_13), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA, }, { /* MCP55 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_14), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA, }, { /* MCP55 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA, }, {0,}, }; -- cgit v1.2.1 From 72b317825728942383b0c2e35016d29bbfb4df00 Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Sun, 31 Jul 2005 18:33:34 +0200 Subject: [PATCH] forcedeth: Add set_mac_address support This is a multi-part message in MIME format. Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 63 ++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 52 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 4d38acbac4ef..1e691024868f 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -90,6 +90,7 @@ * 0.38: 16 Jul 2005: tx irq rewrite: Use global flags instead of * per-packet flags. * 0.39: 18 Jul 2005: Add 64bit descriptor support. + * 0.40: 19 Jul 2005: Add support for mac address change. * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -101,7 +102,7 @@ * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few * superfluous timer interrupts from the nic. */ -#define FORCEDETH_VERSION "0.39" +#define FORCEDETH_VERSION "0.40" #define DRV_NAME "forcedeth" #include @@ -1416,6 +1417,54 @@ static int nv_change_mtu(struct net_device *dev, int new_mtu) return 0; } +static void nv_copy_mac_to_hw(struct net_device *dev) +{ + u8 *base = get_hwbase(dev); + u32 mac[2]; + + mac[0] = (dev->dev_addr[0] << 0) + (dev->dev_addr[1] << 8) + + (dev->dev_addr[2] << 16) + (dev->dev_addr[3] << 24); + mac[1] = (dev->dev_addr[4] << 0) + (dev->dev_addr[5] << 8); + + writel(mac[0], base + NvRegMacAddrA); + writel(mac[1], base + NvRegMacAddrB); +} + +/* + * nv_set_mac_address: dev->set_mac_address function + * Called with rtnl_lock() held. + */ +static int nv_set_mac_address(struct net_device *dev, void *addr) +{ + struct fe_priv *np = get_nvpriv(dev); + struct sockaddr *macaddr = (struct sockaddr*)addr; + + if(!is_valid_ether_addr(macaddr->sa_data)) + return -EADDRNOTAVAIL; + + /* synchronized against open : rtnl_lock() held by caller */ + memcpy(dev->dev_addr, macaddr->sa_data, ETH_ALEN); + + if (netif_running(dev)) { + spin_lock_bh(&dev->xmit_lock); + spin_lock_irq(&np->lock); + + /* stop rx engine */ + nv_stop_rx(dev); + + /* set mac address */ + nv_copy_mac_to_hw(dev); + + /* restart rx engine */ + nv_start_rx(dev); + spin_unlock_irq(&np->lock); + spin_unlock_bh(&dev->xmit_lock); + } else { + nv_copy_mac_to_hw(dev); + } + return 0; +} + /* * nv_set_multicast: dev->set_multicast function * Called with dev->xmit_lock held. @@ -2047,16 +2096,7 @@ static int nv_open(struct net_device *dev) np->in_shutdown = 0; /* 3) set mac address */ - { - u32 mac[2]; - - mac[0] = (dev->dev_addr[0] << 0) + (dev->dev_addr[1] << 8) + - (dev->dev_addr[2] << 16) + (dev->dev_addr[3] << 24); - mac[1] = (dev->dev_addr[4] << 0) + (dev->dev_addr[5] << 8); - - writel(mac[0], base + NvRegMacAddrA); - writel(mac[1], base + NvRegMacAddrB); - } + nv_copy_mac_to_hw(dev); /* 4) give hw rings */ writel((u32) np->ring_addr, base + NvRegRxRingPhysAddr); @@ -2302,6 +2342,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i dev->hard_start_xmit = nv_start_xmit; dev->get_stats = nv_get_stats; dev->change_mtu = nv_change_mtu; + dev->set_mac_address = nv_set_mac_address; dev->set_multicast_list = nv_set_multicast; #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = nv_poll_controller; -- cgit v1.2.1 From b3df9f813bc7b9db62ae0c90b8990b1cebf97345 Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Sun, 31 Jul 2005 18:38:58 +0200 Subject: [PATCH] forcedeth: write back original mac address during ifdown This is a multi-part message in MIME format. Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 1e691024868f..f165ae973985 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -91,6 +91,8 @@ * per-packet flags. * 0.39: 18 Jul 2005: Add 64bit descriptor support. * 0.40: 19 Jul 2005: Add support for mac address change. + * 0.41: 30 Jul 2005: Write back original MAC in nv_close instead + * of nv_remove * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -102,7 +104,7 @@ * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few * superfluous timer interrupts from the nic. */ -#define FORCEDETH_VERSION "0.40" +#define FORCEDETH_VERSION "0.41" #define DRV_NAME "forcedeth" #include @@ -2230,6 +2232,12 @@ static int nv_close(struct net_device *dev) if (np->wolenabled) nv_start_rx(dev); + /* special op: write back the misordered MAC address - otherwise + * the next nv_probe would see a wrong address. + */ + writel(np->orig_mac[0], base + NvRegMacAddrA); + writel(np->orig_mac[1], base + NvRegMacAddrB); + /* FIXME: power down nic */ return 0; @@ -2482,16 +2490,9 @@ static void __devexit nv_remove(struct pci_dev *pci_dev) { struct net_device *dev = pci_get_drvdata(pci_dev); struct fe_priv *np = get_nvpriv(dev); - u8 __iomem *base = get_hwbase(dev); unregister_netdev(dev); - /* special op: write back the misordered MAC address - otherwise - * the next nv_probe would see a wrong address. - */ - writel(np->orig_mac[0], base + NvRegMacAddrA); - writel(np->orig_mac[1], base + NvRegMacAddrB); - /* free all structures */ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (RX_RING + TX_RING), np->rx_ring.orig, np->ring_addr); -- cgit v1.2.1 From 8a60a07129fad60bba779a2a4038c7518b167fc7 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 31 Jul 2005 13:13:24 -0400 Subject: libata: trim trailing whitespace. Also, fixup a tabs-to-spaces block of code in ata_piix. --- drivers/scsi/ata_piix.c | 14 ++--- drivers/scsi/libata-core.c | 4 +- drivers/scsi/libata.h | 2 +- drivers/scsi/sata_qstor.c | 2 +- drivers/scsi/sata_sil.c | 4 +- drivers/scsi/sata_sis.c | 2 +- drivers/scsi/sata_svw.c | 10 ++-- drivers/scsi/sata_sx4.c | 138 ++++++++++++++++++++++----------------------- drivers/scsi/sata_uli.c | 2 +- drivers/scsi/sata_via.c | 2 +- drivers/scsi/sata_vsc.c | 2 +- 11 files changed, 91 insertions(+), 91 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index a2cfade2c1c6..9f1bdfbd8d0a 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -629,13 +629,13 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) port_info[1] = NULL; if (port_info[0]->host_flags & PIIX_FLAG_AHCI) { - u8 tmp; - pci_read_config_byte(pdev, PIIX_SCC, &tmp); - if (tmp == PIIX_AHCI_DEVICE) { - int rc = piix_disable_ahci(pdev); - if (rc) - return rc; - } + u8 tmp; + pci_read_config_byte(pdev, PIIX_SCC, &tmp); + if (tmp == PIIX_AHCI_DEVICE) { + int rc = piix_disable_ahci(pdev); + if (rc) + return rc; + } } if (port_info[0]->host_flags & PIIX_FLAG_COMBINED) { diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 73b1f72b7e43..6e56af23957b 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1304,12 +1304,12 @@ static inline u8 ata_dev_knobble(struct ata_port *ap) /** * ata_dev_config - Run device specific handlers and check for * SATA->PATA bridges - * @ap: Bus + * @ap: Bus * @i: Device * * LOCKING: */ - + void ata_dev_config(struct ata_port *ap, unsigned int i) { /* limit bridge transfers to udma5, 200 sectors */ diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index d90430bbb0de..91b68eedb3c9 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -72,7 +72,7 @@ extern unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, extern void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq); -extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, +extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, unsigned int (*actor) (struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen)); diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 1383e8a28d72..dca9ed7ac760 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -431,7 +431,7 @@ static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set) continue; DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", ap->id, qc->tf.protocol, status); - + /* complete taskfile transaction */ pp->state = qs_state_idle; ata_qc_complete(qc, status); diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 49ed557a4b66..a1b81d43b11f 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -323,13 +323,13 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) while ((len > 0) && (s[len - 1] == ' ')) len--; - for (n = 0; sil_blacklist[n].product; n++) + for (n = 0; sil_blacklist[n].product; n++) if (!memcmp(sil_blacklist[n].product, s, strlen(sil_blacklist[n].product))) { quirks = sil_blacklist[n].quirk; break; } - + /* limit requests to 15 sectors */ if (quirks & SIL_QUIRK_MOD15WRITE) { printk(KERN_INFO "ata%u(%u): applying Seagate errata fix\n", diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index e418b89c6b9d..b250ae0c7773 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -234,7 +234,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) pci_read_config_dword(pdev, SIS_GENCTL, &genctl); if ((genctl & GENCTL_IOMAPPED_SCR) == 0) probe_ent->host_flags |= SIS_FLAG_CFGSCR; - + /* if hardware thinks SCRs are in IO space, but there are * no IO resources assigned, change to PCI cfg space. */ diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index 858e07185dbd..6fd2ce1ffcd8 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -195,18 +195,18 @@ static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc) /* start host DMA transaction */ dmactl = readb(mmio + ATA_DMA_CMD); writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); - /* There is a race condition in certain SATA controllers that can - be seen when the r/w command is given to the controller before the + /* There is a race condition in certain SATA controllers that can + be seen when the r/w command is given to the controller before the host DMA is started. On a Read command, the controller would initiate the command to the drive even before it sees the DMA start. When there - are very fast drives connected to the controller, or when the data request + are very fast drives connected to the controller, or when the data request hits in the drive cache, there is the possibility that the drive returns a part or all of the requested data to the controller before the DMA start is issued. In this case, the controller would become confused as to what to do with the data. In the worst case when all the data is returned back to the controller, the controller could hang. In other cases it could return partial data returning in data corruption. This problem has been seen in PPC systems and can also appear - on an system with very fast disks, where the SATA controller is sitting behind a + on an system with very fast disks, where the SATA controller is sitting behind a number of bridges, and hence there is significant latency between the r/w command and the start command. */ /* issue r/w command if the access is to ATA*/ @@ -214,7 +214,7 @@ static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc) ap->ops->exec_command(ap, &qc->tf); } - + static u8 k2_stat_check_status(struct ata_port *ap) { return readl((void *) ap->ioaddr.status_addr); diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 140cea05de3f..8e59868b24bb 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -94,7 +94,7 @@ enum { PDC_DIMM1_CONTROL_OFFSET = 0x84, PDC_SDRAM_CONTROL_OFFSET = 0x88, PDC_I2C_WRITE = 0x00000000, - PDC_I2C_READ = 0x00000040, + PDC_I2C_READ = 0x00000040, PDC_I2C_START = 0x00000080, PDC_I2C_MASK_INT = 0x00000020, PDC_I2C_COMPLETE = 0x00010000, @@ -105,16 +105,16 @@ enum { PDC_DIMM_SPD_COLUMN_NUM = 4, PDC_DIMM_SPD_MODULE_ROW = 5, PDC_DIMM_SPD_TYPE = 11, - PDC_DIMM_SPD_FRESH_RATE = 12, - PDC_DIMM_SPD_BANK_NUM = 17, + PDC_DIMM_SPD_FRESH_RATE = 12, + PDC_DIMM_SPD_BANK_NUM = 17, PDC_DIMM_SPD_CAS_LATENCY = 18, - PDC_DIMM_SPD_ATTRIBUTE = 21, + PDC_DIMM_SPD_ATTRIBUTE = 21, PDC_DIMM_SPD_ROW_PRE_CHARGE = 27, - PDC_DIMM_SPD_ROW_ACTIVE_DELAY = 28, + PDC_DIMM_SPD_ROW_ACTIVE_DELAY = 28, PDC_DIMM_SPD_RAS_CAS_DELAY = 29, PDC_DIMM_SPD_ACTIVE_PRECHARGE = 30, PDC_DIMM_SPD_SYSTEM_FREQ = 126, - PDC_CTL_STATUS = 0x08, + PDC_CTL_STATUS = 0x08, PDC_DIMM_WINDOW_CTLR = 0x0C, PDC_TIME_CONTROL = 0x3C, PDC_TIME_PERIOD = 0x40, @@ -157,15 +157,15 @@ static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf); static void pdc20621_host_stop(struct ata_host_set *host_set); static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe); static int pdc20621_detect_dimm(struct ata_probe_ent *pe); -static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, +static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device, u32 subaddr, u32 *pdata); static int pdc20621_prog_dimm0(struct ata_probe_ent *pe); static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe); #ifdef ATA_VERBOSE_DEBUG -static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, +static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource, u32 offset, u32 size); #endif -static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, +static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, u32 offset, u32 size); static void pdc20621_irq_clear(struct ata_port *ap); static int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc); @@ -922,7 +922,7 @@ static void pdc_sata_setup_port(struct ata_ioports *port, unsigned long base) #ifdef ATA_VERBOSE_DEBUG -static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource, +static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource, u32 offset, u32 size) { u32 window_size; @@ -936,9 +936,9 @@ static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource, /* hard-code chip #0 */ mmio += PDC_CHIP0_OFS; - page_mask = 0x00; - window_size = 0x2000 * 4; /* 32K byte uchar size */ - idx = (u16) (offset / window_size); + page_mask = 0x00; + window_size = 0x2000 * 4; /* 32K byte uchar size */ + idx = (u16) (offset / window_size); writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); @@ -947,19 +947,19 @@ static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource, offset -= (idx * window_size); idx++; - dist = ((long) (window_size - (offset + size))) >= 0 ? size : + dist = ((long) (window_size - (offset + size))) >= 0 ? size : (long) (window_size - offset); - memcpy_fromio((char *) psource, (char *) (dimm_mmio + offset / 4), + memcpy_fromio((char *) psource, (char *) (dimm_mmio + offset / 4), dist); - psource += dist; + psource += dist; size -= dist; for (; (long) size >= (long) window_size ;) { writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_fromio((char *) psource, (char *) (dimm_mmio), + memcpy_fromio((char *) psource, (char *) (dimm_mmio), window_size / 4); psource += window_size; size -= window_size; @@ -971,14 +971,14 @@ static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource, readl(mmio + PDC_GENERAL_CTLR); writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_fromio((char *) psource, (char *) (dimm_mmio), + memcpy_fromio((char *) psource, (char *) (dimm_mmio), size / 4); } } #endif -static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, +static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, u32 offset, u32 size) { u32 window_size; @@ -989,16 +989,16 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, struct pdc_host_priv *hpriv = pe->private_data; void *dimm_mmio = hpriv->dimm_mmio; - /* hard-code chip #0 */ + /* hard-code chip #0 */ mmio += PDC_CHIP0_OFS; - page_mask = 0x00; - window_size = 0x2000 * 4; /* 32K byte uchar size */ + page_mask = 0x00; + window_size = 0x2000 * 4; /* 32K byte uchar size */ idx = (u16) (offset / window_size); writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); readl(mmio + PDC_DIMM_WINDOW_CTLR); - offset -= (idx * window_size); + offset -= (idx * window_size); idx++; dist = ((long)(s32)(window_size - (offset + size))) >= 0 ? size : (long) (window_size - offset); @@ -1006,12 +1006,12 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); - psource += dist; + psource += dist; size -= dist; for (; (long) size >= (long) window_size ;) { writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_toio((char *) (dimm_mmio), (char *) psource, + memcpy_toio((char *) (dimm_mmio), (char *) psource, window_size / 4); writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); @@ -1019,7 +1019,7 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, size -= window_size; idx ++; } - + if (size) { writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); readl(mmio + PDC_DIMM_WINDOW_CTLR); @@ -1030,12 +1030,12 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, } -static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device, +static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device, u32 subaddr, u32 *pdata) { void *mmio = pe->mmio_base; u32 i2creg = 0; - u32 status; + u32 status; u32 count =0; /* hard-code chip #0 */ @@ -1049,7 +1049,7 @@ static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device, readl(mmio + PDC_I2C_ADDR_DATA_OFFSET); /* Write Control to perform read operation, mask int */ - writel(PDC_I2C_READ | PDC_I2C_START | PDC_I2C_MASK_INT, + writel(PDC_I2C_READ | PDC_I2C_START | PDC_I2C_MASK_INT, mmio + PDC_I2C_CONTROL_OFFSET); for (count = 0; count <= 1000; count ++) { @@ -1062,26 +1062,26 @@ static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device, } *pdata = (status >> 8) & 0x000000ff; - return 1; + return 1; } static int pdc20621_detect_dimm(struct ata_probe_ent *pe) { u32 data=0 ; - if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, + if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_SYSTEM_FREQ, &data)) { if (data == 100) return 100; } else return 0; - + if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, 9, &data)) { - if(data <= 0x75) + if(data <= 0x75) return 133; } else return 0; - + return 0; } @@ -1091,15 +1091,15 @@ static int pdc20621_prog_dimm0(struct ata_probe_ent *pe) u32 spd0[50]; u32 data = 0; int size, i; - u8 bdimmsize; + u8 bdimmsize; void *mmio = pe->mmio_base; static const struct { unsigned int reg; unsigned int ofs; } pdc_i2c_read_data [] = { - { PDC_DIMM_SPD_TYPE, 11 }, + { PDC_DIMM_SPD_TYPE, 11 }, { PDC_DIMM_SPD_FRESH_RATE, 12 }, - { PDC_DIMM_SPD_COLUMN_NUM, 4 }, + { PDC_DIMM_SPD_COLUMN_NUM, 4 }, { PDC_DIMM_SPD_ATTRIBUTE, 21 }, { PDC_DIMM_SPD_ROW_NUM, 3 }, { PDC_DIMM_SPD_BANK_NUM, 17 }, @@ -1108,7 +1108,7 @@ static int pdc20621_prog_dimm0(struct ata_probe_ent *pe) { PDC_DIMM_SPD_ROW_ACTIVE_DELAY, 28 }, { PDC_DIMM_SPD_RAS_CAS_DELAY, 29 }, { PDC_DIMM_SPD_ACTIVE_PRECHARGE, 30 }, - { PDC_DIMM_SPD_CAS_LATENCY, 18 }, + { PDC_DIMM_SPD_CAS_LATENCY, 18 }, }; /* hard-code chip #0 */ @@ -1116,17 +1116,17 @@ static int pdc20621_prog_dimm0(struct ata_probe_ent *pe) for(i=0; i spd0[28]) - ? spd0[29] : spd0[28]) + 9) / 10) - 1) << 10; + data |= (((((spd0[29] > spd0[28]) + ? spd0[29] : spd0[28]) + 9) / 10) - 1) << 10; data |= ((spd0[30] - spd0[29] + 9) / 10 - 2) << 12; - - if (spd0[18] & 0x08) + + if (spd0[18] & 0x08) data |= ((0x03) << 14); else if (spd0[18] & 0x04) data |= ((0x02) << 14); @@ -1135,7 +1135,7 @@ static int pdc20621_prog_dimm0(struct ata_probe_ent *pe) else data |= (0 << 14); - /* + /* Calculate the size of bDIMMSize (power of 2) and merge the DIMM size by program start/end address. */ @@ -1145,9 +1145,9 @@ static int pdc20621_prog_dimm0(struct ata_probe_ent *pe) data |= (((size / 16) - 1) << 16); data |= (0 << 23); data |= 8; - writel(data, mmio + PDC_DIMM0_CONTROL_OFFSET); + writel(data, mmio + PDC_DIMM0_CONTROL_OFFSET); readl(mmio + PDC_DIMM0_CONTROL_OFFSET); - return size; + return size; } @@ -1167,12 +1167,12 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe) Refresh Enable (bit 17) */ - data = 0x022259F1; + data = 0x022259F1; writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET); readl(mmio + PDC_SDRAM_CONTROL_OFFSET); /* Turn on for ECC */ - pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, + pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE, &spd0); if (spd0 == 0x02) { data |= (0x01 << 16); @@ -1186,22 +1186,22 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe) data |= (1<<19); writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET); - error = 1; + error = 1; for (i = 1; i <= 10; i++) { /* polling ~5 secs */ data = readl(mmio + PDC_SDRAM_CONTROL_OFFSET); if (!(data & (1<<19))) { error = 0; - break; + break; } msleep(i*100); } return error; } - + static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe) { - int speed, size, length; + int speed, size, length; u32 addr,spd0,pci_status; u32 tmp=0; u32 time_period=0; @@ -1228,7 +1228,7 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe) /* Wait 3 seconds */ msleep(3000); - /* + /* When timer is enabled, counter is decreased every internal clock cycle. */ @@ -1236,24 +1236,24 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe) tcount = readl(mmio + PDC_TIME_COUNTER); VPRINTK("Time Counter Register (0x44): 0x%x\n", tcount); - /* + /* If SX4 is on PCI-X bus, after 3 seconds, the timer counter register should be >= (0xffffffff - 3x10^8). */ if(tcount >= PCI_X_TCOUNT) { ticks = (time_period - tcount); VPRINTK("Num counters 0x%x (%d)\n", ticks, ticks); - + clock = (ticks / 300000); VPRINTK("10 * Internal clk = 0x%x (%d)\n", clock, clock); - + clock = (clock * 33); VPRINTK("10 * Internal clk * 33 = 0x%x (%d)\n", clock, clock); /* PLL F Param (bit 22:16) */ fparam = (1400000 / clock) - 2; VPRINTK("PLL F Param: 0x%x (%d)\n", fparam, fparam); - + /* OD param = 0x2 (bit 31:30), R param = 0x5 (bit 29:25) */ pci_status = (0x8a001824 | (fparam << 16)); } else @@ -1264,21 +1264,21 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe) writel(pci_status, mmio + PDC_CTL_STATUS); readl(mmio + PDC_CTL_STATUS); - /* + /* Read SPD of DIMM by I2C interface, and program the DIMM Module Controller. */ if (!(speed = pdc20621_detect_dimm(pe))) { - printk(KERN_ERR "Detect Local DIMM Fail\n"); + printk(KERN_ERR "Detect Local DIMM Fail\n"); return 1; /* DIMM error */ } VPRINTK("Local DIMM Speed = %d\n", speed); - /* Programming DIMM0 Module Control Register (index_CID0:80h) */ + /* Programming DIMM0 Module Control Register (index_CID0:80h) */ size = pdc20621_prog_dimm0(pe); VPRINTK("Local DIMM Size = %dMB\n",size); - /* Programming DIMM Module Global Control Register (index_CID0:88h) */ + /* Programming DIMM Module Global Control Register (index_CID0:88h) */ if (pdc20621_prog_dimm_global(pe)) { printk(KERN_ERR "Programming DIMM Module Global Control Register Fail\n"); return 1; @@ -1297,30 +1297,30 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe) pdc20621_put_to_dimm(pe, (void *) test_parttern1, 0x10040, 40); pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x40, 40); - printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], + printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], test_parttern2[1], &(test_parttern2[2])); - pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x10040, + pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x10040, 40); - printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], + printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], test_parttern2[1], &(test_parttern2[2])); pdc20621_put_to_dimm(pe, (void *) test_parttern1, 0x40, 40); pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x40, 40); - printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], + printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], test_parttern2[1], &(test_parttern2[2])); } #endif /* ECC initiliazation. */ - pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, + pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE, &spd0); if (spd0 == 0x02) { VPRINTK("Start ECC initialization\n"); addr = 0; length = size * 1024 * 1024; while (addr < length) { - pdc20621_put_to_dimm(pe, (void *) &tmp, addr, + pdc20621_put_to_dimm(pe, (void *) &tmp, addr, sizeof(u32)); addr += sizeof(u32); } diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index a71fb54eebd3..eb202a73bc0e 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -214,7 +214,7 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) rc = -ENOMEM; goto err_out_regions; } - + switch (board_idx) { case uli_5287: probe_ent->port[0].scr_addr = ULI5287_BASE; diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index f43183c19a12..feff10980487 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -347,7 +347,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent = vt6420_init_probe_ent(pdev); else probe_ent = vt6421_init_probe_ent(pdev); - + if (!probe_ent) { printk(KERN_ERR DRV_NAME "(%s): out of memory\n", pci_name(pdev)); diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index c5e09dc6f3de..cb3a6d89cf00 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -342,7 +342,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d pci_set_master(pdev); - /* + /* * Config offset 0x98 is "Extended Control and Status Register 0" * Default value is (1 << 28). All bits except bit 28 are reserved in * DPA mode. If bit 28 is set, LED 0 reflects all ports' activity. -- cgit v1.2.1 From 3db368f71a91f08c5a93a5bfb6ca1e2de2668e04 Mon Sep 17 00:00:00 2001 From: Jason Gaston Date: Wed, 10 Aug 2005 06:18:43 -0700 Subject: [PATCH] ahci: AHCI mode SATA patch for Intel ICH7-M DH MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Hello, This patch adds the Intel ICH7-M DH DID to the ahci.c file for AHCI mode SATA support.  This patch was built against the 2.6.13-rc6 kernel.   If acceptable, please apply. Thanks, Jason Gaston Signed-off-by:  Jason Gaston Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index c5623694d10f..0c79cafb1348 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -269,6 +269,8 @@ static struct pci_device_id ahci_pci_tbl[] = { board_ahci }, /* ESB2 */ { PCI_VENDOR_ID_INTEL, 0x2683, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_ahci }, /* ESB2 */ + { PCI_VENDOR_ID_INTEL, 0x27c6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* ICH7-M DH */ { } /* terminate list */ }; -- cgit v1.2.1 From 20346722ec474245446bcbf460594a935a5c0512 Mon Sep 17 00:00:00 2001 From: "raghavendra.koushik@neterion.com" Date: Wed, 3 Aug 2005 12:24:33 -0700 Subject: [PATCH] S2io: Code cleanup Hi, We are submitting a series of 13 patches to support our Xframe I and Xframe II line of products. The patches can be categorized as follows: Patches 1-8 : Changes applicable to both Xframe I and II Patches 9-11: Xframe II specific features Patch 12: Addresses issues found during testing cycle. Patch 13: Incorpoates mostly the review comments from community and some last moment bug fixes. Please review the patches and let us know your comments. Starting with patch 1 below. This patch involves cosmetic changes(tabs and indentation, regrouping of transmit and receive data structures, typecasting, code cleanup). Signed-off-by: Ravinandan Arakali Signed-off-by: Raghavendra Koushik Signed-off-by: Jeff Garzik --- drivers/net/s2io-regs.h | 19 +- drivers/net/s2io.c | 1800 ++++++++++++++++++++++------------------------- drivers/net/s2io.h | 286 +++++--- 3 files changed, 1003 insertions(+), 1102 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h index 7092ca6b277e..8746740e6efd 100644 --- a/drivers/net/s2io-regs.h +++ b/drivers/net/s2io-regs.h @@ -77,19 +77,18 @@ typedef struct _XENA_dev_config { #define ADAPTER_ECC_EN BIT(55) u64 serr_source; -#define SERR_SOURCE_PIC BIT(0) -#define SERR_SOURCE_TXDMA BIT(1) -#define SERR_SOURCE_RXDMA BIT(2) +#define SERR_SOURCE_PIC BIT(0) +#define SERR_SOURCE_TXDMA BIT(1) +#define SERR_SOURCE_RXDMA BIT(2) #define SERR_SOURCE_MAC BIT(3) #define SERR_SOURCE_MC BIT(4) #define SERR_SOURCE_XGXS BIT(5) -#define SERR_SOURCE_ANY (SERR_SOURCE_PIC | \ - SERR_SOURCE_TXDMA | \ - SERR_SOURCE_RXDMA | \ - SERR_SOURCE_MAC | \ - SERR_SOURCE_MC | \ - SERR_SOURCE_XGXS) - +#define SERR_SOURCE_ANY (SERR_SOURCE_PIC | \ + SERR_SOURCE_TXDMA | \ + SERR_SOURCE_RXDMA | \ + SERR_SOURCE_MAC | \ + SERR_SOURCE_MC | \ + SERR_SOURCE_XGXS) u8 unused_0[0x800 - 0x120]; diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index ea638b162d3f..0721e78dd8b0 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -11,29 +11,28 @@ * See the file COPYING in this distribution for more information. * * Credits: - * Jeff Garzik : For pointing out the improper error condition - * check in the s2io_xmit routine and also some - * issues in the Tx watch dog function. Also for - * patiently answering all those innumerable + * Jeff Garzik : For pointing out the improper error condition + * check in the s2io_xmit routine and also some + * issues in the Tx watch dog function. Also for + * patiently answering all those innumerable * questions regaring the 2.6 porting issues. * Stephen Hemminger : Providing proper 2.6 porting mechanism for some * macros available only in 2.6 Kernel. - * Francois Romieu : For pointing out all code part that were + * Francois Romieu : For pointing out all code part that were * deprecated and also styling related comments. - * Grant Grundler : For helping me get rid of some Architecture + * Grant Grundler : For helping me get rid of some Architecture * dependent code. * Christopher Hellwig : Some more 2.6 specific issues in the driver. - * + * * The module loadable parameters that are supported by the driver and a brief * explaination of all the variables. - * rx_ring_num : This can be used to program the number of receive rings used - * in the driver. - * rx_ring_len: This defines the number of descriptors each ring can have. This + * rx_ring_num : This can be used to program the number of receive rings used + * in the driver. + * rx_ring_len: This defines the number of descriptors each ring can have. This * is also an array of size 8. * tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver. - * tx_fifo_len: This too is an array of 8. Each element defines the number of + * tx_fifo_len: This too is an array of 8. Each element defines the number of * Tx descriptors that can be associated with each corresponding FIFO. - * in PCI Configuration space. ************************************************************************/ #include @@ -57,19 +56,19 @@ #include #include -#include #include #include +#include /* local include */ #include "s2io.h" #include "s2io-regs.h" /* S2io Driver name & version. */ -static char s2io_driver_name[] = "s2io"; -static char s2io_driver_version[] = "Version 1.7.7.1"; +static char s2io_driver_name[] = "Neterion"; +static char s2io_driver_version[] = "Version 1.7.7"; -/* +/* * Cards with following subsystem_id have a link state indication * problem, 600B, 600C, 600D, 640B, 640C and 640D. * macro below identifies these cards given the subsystem_id. @@ -86,9 +85,13 @@ static char s2io_driver_version[] = "Version 1.7.7.1"; static inline int rx_buffer_level(nic_t * sp, int rxb_size, int ring) { int level = 0; - if ((sp->pkt_cnt[ring] - rxb_size) > 16) { + mac_info_t *mac_control; + + mac_control = &sp->mac_control; + if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16) { level = LOW; - if ((sp->pkt_cnt[ring] - rxb_size) < MAX_RXDS_PER_BLOCK) { + if ((mac_control->rings[ring].pkt_cnt - rxb_size) < + MAX_RXDS_PER_BLOCK) { level = PANIC; } } @@ -153,8 +156,7 @@ static char ethtool_stats_keys[][ETH_GSTRING_LEN] = { #define S2IO_TEST_LEN sizeof(s2io_gstrings) / ETH_GSTRING_LEN #define S2IO_STRINGS_LEN S2IO_TEST_LEN * ETH_GSTRING_LEN - -/* +/* * Constants to be programmed into the Xena's registers, to configure * the XAUI. */ @@ -196,8 +198,7 @@ static u64 default_dtx_cfg[] = { END_SIGN }; - -/* +/* * Constants for Fixing the MacAddress problem seen mostly on * Alpha machines. */ @@ -227,6 +228,8 @@ static unsigned int rx_ring_num = 1; static unsigned int rx_ring_sz[MAX_RX_RINGS] = {[0 ...(MAX_RX_RINGS - 1)] = 0 }; static unsigned int Stats_refresh_time = 4; +static unsigned int rts_frm_len[MAX_RX_RINGS] = + {[0 ...(MAX_RX_RINGS - 1)] = 0 }; static unsigned int rmac_pause_time = 65535; static unsigned int mc_pause_threshold_q0q3 = 187; static unsigned int mc_pause_threshold_q4q7 = 187; @@ -237,9 +240,9 @@ static unsigned int rmac_util_period = 5; static unsigned int indicate_max_pkts; #endif -/* +/* * S2IO device table. - * This table lists all the devices that this driver supports. + * This table lists all the devices that this driver supports. */ static struct pci_device_id s2io_tbl[] __devinitdata = { {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN, @@ -247,9 +250,9 @@ static struct pci_device_id s2io_tbl[] __devinitdata = { {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI, PCI_ANY_ID, PCI_ANY_ID}, {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN, - PCI_ANY_ID, PCI_ANY_ID}, - {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI, - PCI_ANY_ID, PCI_ANY_ID}, + PCI_ANY_ID, PCI_ANY_ID}, + {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI, + PCI_ANY_ID, PCI_ANY_ID}, {0,} }; @@ -268,8 +271,8 @@ static struct pci_driver s2io_driver = { /** * init_shared_mem - Allocation and Initialization of Memory * @nic: Device private variable. - * Description: The function allocates all the memory areas shared - * between the NIC and the driver. This includes Tx descriptors, + * Description: The function allocates all the memory areas shared + * between the NIC and the driver. This includes Tx descriptors, * Rx descriptors and the statistics block. */ @@ -279,11 +282,11 @@ static int init_shared_mem(struct s2io_nic *nic) void *tmp_v_addr, *tmp_v_addr_next; dma_addr_t tmp_p_addr, tmp_p_addr_next; RxD_block_t *pre_rxd_blk = NULL; - int i, j, blk_cnt; + int i, j, blk_cnt, rx_sz, tx_sz; int lst_size, lst_per_page; struct net_device *dev = nic->dev; #ifdef CONFIG_2BUFF_MODE - unsigned long tmp; + u64 tmp; buffAdd_t *ba; #endif @@ -308,28 +311,34 @@ static int init_shared_mem(struct s2io_nic *nic) } lst_size = (sizeof(TxD_t) * config->max_txds); + tx_sz = lst_size * size; lst_per_page = PAGE_SIZE / lst_size; for (i = 0; i < config->tx_fifo_num; i++) { int fifo_len = config->tx_cfg[i].fifo_len; int list_holder_size = fifo_len * sizeof(list_info_hold_t); - nic->list_info[i] = kmalloc(list_holder_size, GFP_KERNEL); - if (!nic->list_info[i]) { + mac_control->fifos[i].list_info = kmalloc(list_holder_size, + GFP_KERNEL); + if (!mac_control->fifos[i].list_info) { DBG_PRINT(ERR_DBG, "Malloc failed for list_info\n"); return -ENOMEM; } - memset(nic->list_info[i], 0, list_holder_size); + memset(mac_control->fifos[i].list_info, 0, list_holder_size); } for (i = 0; i < config->tx_fifo_num; i++) { int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len, lst_per_page); - mac_control->tx_curr_put_info[i].offset = 0; - mac_control->tx_curr_put_info[i].fifo_len = + mac_control->fifos[i].tx_curr_put_info.offset = 0; + mac_control->fifos[i].tx_curr_put_info.fifo_len = config->tx_cfg[i].fifo_len - 1; - mac_control->tx_curr_get_info[i].offset = 0; - mac_control->tx_curr_get_info[i].fifo_len = + mac_control->fifos[i].tx_curr_get_info.offset = 0; + mac_control->fifos[i].tx_curr_get_info.fifo_len = config->tx_cfg[i].fifo_len - 1; + mac_control->fifos[i].fifo_no = i; + mac_control->fifos[i].nic = nic; + mac_control->fifos[i].max_txds = MAX_SKB_FRAGS; + for (j = 0; j < page_num; j++) { int k = 0; dma_addr_t tmp_p; @@ -345,16 +354,15 @@ static int init_shared_mem(struct s2io_nic *nic) while (k < lst_per_page) { int l = (j * lst_per_page) + k; if (l == config->tx_cfg[i].fifo_len) - goto end_txd_alloc; - nic->list_info[i][l].list_virt_addr = + break; + mac_control->fifos[i].list_info[l].list_virt_addr = tmp_v + (k * lst_size); - nic->list_info[i][l].list_phy_addr = + mac_control->fifos[i].list_info[l].list_phy_addr = tmp_p + (k * lst_size); k++; } } } - end_txd_alloc: /* Allocation and initialization of RXDs in Rings */ size = 0; @@ -367,21 +375,26 @@ static int init_shared_mem(struct s2io_nic *nic) return FAILURE; } size += config->rx_cfg[i].num_rxd; - nic->block_count[i] = + mac_control->rings[i].block_count = config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1); - nic->pkt_cnt[i] = - config->rx_cfg[i].num_rxd - nic->block_count[i]; + mac_control->rings[i].pkt_cnt = + config->rx_cfg[i].num_rxd - mac_control->rings[i].block_count; } + size = (size * (sizeof(RxD_t))); + rx_sz = size; for (i = 0; i < config->rx_ring_num; i++) { - mac_control->rx_curr_get_info[i].block_index = 0; - mac_control->rx_curr_get_info[i].offset = 0; - mac_control->rx_curr_get_info[i].ring_len = + mac_control->rings[i].rx_curr_get_info.block_index = 0; + mac_control->rings[i].rx_curr_get_info.offset = 0; + mac_control->rings[i].rx_curr_get_info.ring_len = config->rx_cfg[i].num_rxd - 1; - mac_control->rx_curr_put_info[i].block_index = 0; - mac_control->rx_curr_put_info[i].offset = 0; - mac_control->rx_curr_put_info[i].ring_len = + mac_control->rings[i].rx_curr_put_info.block_index = 0; + mac_control->rings[i].rx_curr_put_info.offset = 0; + mac_control->rings[i].rx_curr_put_info.ring_len = config->rx_cfg[i].num_rxd - 1; + mac_control->rings[i].nic = nic; + mac_control->rings[i].ring_no = i; + blk_cnt = config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1); /* Allocating all the Rx blocks */ @@ -395,32 +408,36 @@ static int init_shared_mem(struct s2io_nic *nic) &tmp_p_addr); if (tmp_v_addr == NULL) { /* - * In case of failure, free_shared_mem() - * is called, which should free any - * memory that was alloced till the + * In case of failure, free_shared_mem() + * is called, which should free any + * memory that was alloced till the * failure happened. */ - nic->rx_blocks[i][j].block_virt_addr = + mac_control->rings[i].rx_blocks[j].block_virt_addr = tmp_v_addr; return -ENOMEM; } memset(tmp_v_addr, 0, size); - nic->rx_blocks[i][j].block_virt_addr = tmp_v_addr; - nic->rx_blocks[i][j].block_dma_addr = tmp_p_addr; + mac_control->rings[i].rx_blocks[j].block_virt_addr = + tmp_v_addr; + mac_control->rings[i].rx_blocks[j].block_dma_addr = + tmp_p_addr; } /* Interlinking all Rx Blocks */ for (j = 0; j < blk_cnt; j++) { - tmp_v_addr = nic->rx_blocks[i][j].block_virt_addr; + tmp_v_addr = + mac_control->rings[i].rx_blocks[j].block_virt_addr; tmp_v_addr_next = - nic->rx_blocks[i][(j + 1) % + mac_control->rings[i].rx_blocks[(j + 1) % blk_cnt].block_virt_addr; - tmp_p_addr = nic->rx_blocks[i][j].block_dma_addr; + tmp_p_addr = + mac_control->rings[i].rx_blocks[j].block_dma_addr; tmp_p_addr_next = - nic->rx_blocks[i][(j + 1) % + mac_control->rings[i].rx_blocks[(j + 1) % blk_cnt].block_dma_addr; pre_rxd_blk = (RxD_block_t *) tmp_v_addr; - pre_rxd_blk->reserved_1 = END_OF_BLOCK; /* last RxD + pre_rxd_blk->reserved_1 = END_OF_BLOCK; /* last RxD * marker. */ #ifndef CONFIG_2BUFF_MODE @@ -433,43 +450,43 @@ static int init_shared_mem(struct s2io_nic *nic) } #ifdef CONFIG_2BUFF_MODE - /* + /* * Allocation of Storages for buffer addresses in 2BUFF mode * and the buffers as well. */ for (i = 0; i < config->rx_ring_num; i++) { blk_cnt = config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1); - nic->ba[i] = kmalloc((sizeof(buffAdd_t *) * blk_cnt), + mac_control->rings[i].ba = kmalloc((sizeof(buffAdd_t *) * blk_cnt), GFP_KERNEL); - if (!nic->ba[i]) + if (!mac_control->rings[i].ba) return -ENOMEM; for (j = 0; j < blk_cnt; j++) { int k = 0; - nic->ba[i][j] = kmalloc((sizeof(buffAdd_t) * + mac_control->rings[i].ba[j] = kmalloc((sizeof(buffAdd_t) * (MAX_RXDS_PER_BLOCK + 1)), GFP_KERNEL); - if (!nic->ba[i][j]) + if (!mac_control->rings[i].ba[j]) return -ENOMEM; while (k != MAX_RXDS_PER_BLOCK) { - ba = &nic->ba[i][j][k]; + ba = &mac_control->rings[i].ba[j][k]; - ba->ba_0_org = kmalloc + ba->ba_0_org = (void *) kmalloc (BUF0_LEN + ALIGN_SIZE, GFP_KERNEL); if (!ba->ba_0_org) return -ENOMEM; - tmp = (unsigned long) ba->ba_0_org; + tmp = (u64) ba->ba_0_org; tmp += ALIGN_SIZE; - tmp &= ~((unsigned long) ALIGN_SIZE); + tmp &= ~((u64) ALIGN_SIZE); ba->ba_0 = (void *) tmp; - ba->ba_1_org = kmalloc + ba->ba_1_org = (void *) kmalloc (BUF1_LEN + ALIGN_SIZE, GFP_KERNEL); if (!ba->ba_1_org) return -ENOMEM; - tmp = (unsigned long) ba->ba_1_org; + tmp = (u64) ba->ba_1_org; tmp += ALIGN_SIZE; - tmp &= ~((unsigned long) ALIGN_SIZE); + tmp &= ~((u64) ALIGN_SIZE); ba->ba_1 = (void *) tmp; k++; } @@ -483,9 +500,9 @@ static int init_shared_mem(struct s2io_nic *nic) (nic->pdev, size, &mac_control->stats_mem_phy); if (!mac_control->stats_mem) { - /* - * In case of failure, free_shared_mem() is called, which - * should free any memory that was alloced till the + /* + * In case of failure, free_shared_mem() is called, which + * should free any memory that was alloced till the * failure happened. */ return -ENOMEM; @@ -495,15 +512,14 @@ static int init_shared_mem(struct s2io_nic *nic) tmp_v_addr = mac_control->stats_mem; mac_control->stats_info = (StatInfo_t *) tmp_v_addr; memset(tmp_v_addr, 0, size); - DBG_PRINT(INIT_DBG, "%s:Ring Mem PHY: 0x%llx\n", dev->name, (unsigned long long) tmp_p_addr); return SUCCESS; } -/** - * free_shared_mem - Free the allocated Memory +/** + * free_shared_mem - Free the allocated Memory * @nic: Device private variable. * Description: This function is to free all memory locations allocated by * the init_shared_mem() function and return it to the kernel. @@ -533,15 +549,18 @@ static void free_shared_mem(struct s2io_nic *nic) lst_per_page); for (j = 0; j < page_num; j++) { int mem_blks = (j * lst_per_page); - if (!nic->list_info[i][mem_blks].list_virt_addr) + if (!mac_control->fifos[i].list_info[mem_blks]. + list_virt_addr) break; pci_free_consistent(nic->pdev, PAGE_SIZE, - nic->list_info[i][mem_blks]. + mac_control->fifos[i]. + list_info[mem_blks]. list_virt_addr, - nic->list_info[i][mem_blks]. + mac_control->fifos[i]. + list_info[mem_blks]. list_phy_addr); } - kfree(nic->list_info[i]); + kfree(mac_control->fifos[i].list_info); } #ifndef CONFIG_2BUFF_MODE @@ -550,10 +569,12 @@ static void free_shared_mem(struct s2io_nic *nic) size = SIZE_OF_BLOCK; #endif for (i = 0; i < config->rx_ring_num; i++) { - blk_cnt = nic->block_count[i]; + blk_cnt = mac_control->rings[i].block_count; for (j = 0; j < blk_cnt; j++) { - tmp_v_addr = nic->rx_blocks[i][j].block_virt_addr; - tmp_p_addr = nic->rx_blocks[i][j].block_dma_addr; + tmp_v_addr = mac_control->rings[i].rx_blocks[j]. + block_virt_addr; + tmp_p_addr = mac_control->rings[i].rx_blocks[j]. + block_dma_addr; if (tmp_v_addr == NULL) break; pci_free_consistent(nic->pdev, size, @@ -566,35 +587,21 @@ static void free_shared_mem(struct s2io_nic *nic) for (i = 0; i < config->rx_ring_num; i++) { blk_cnt = config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1); - if (!nic->ba[i]) - goto end_free; for (j = 0; j < blk_cnt; j++) { int k = 0; - if (!nic->ba[i][j]) { - kfree(nic->ba[i]); - goto end_free; - } + if (!mac_control->rings[i].ba[j]) + continue; while (k != MAX_RXDS_PER_BLOCK) { - buffAdd_t *ba = &nic->ba[i][j][k]; - if (!ba || !ba->ba_0_org || !ba->ba_1_org) - { - kfree(nic->ba[i]); - kfree(nic->ba[i][j]); - if(ba->ba_0_org) - kfree(ba->ba_0_org); - if(ba->ba_1_org) - kfree(ba->ba_1_org); - goto end_free; - } + buffAdd_t *ba = &mac_control->rings[i].ba[j][k]; kfree(ba->ba_0_org); kfree(ba->ba_1_org); k++; } - kfree(nic->ba[i][j]); + kfree(mac_control->rings[i].ba[j]); } - kfree(nic->ba[i]); + if (mac_control->rings[i].ba) + kfree(mac_control->rings[i].ba); } -end_free: #endif if (mac_control->stats_mem) { @@ -605,12 +612,12 @@ end_free: } } -/** - * init_nic - Initialization of hardware +/** + * init_nic - Initialization of hardware * @nic: device peivate variable - * Description: The function sequentially configures every block - * of the H/W from their reset values. - * Return Value: SUCCESS on success and + * Description: The function sequentially configures every block + * of the H/W from their reset values. + * Return Value: SUCCESS on success and * '-1' on failure (endian settings incorrect). */ @@ -626,12 +633,13 @@ static int init_nic(struct s2io_nic *nic) struct config_param *config; int mdio_cnt = 0, dtx_cnt = 0; unsigned long long mem_share; + int mem_size; mac_control = &nic->mac_control; config = &nic->config; - /* Initialize swapper control register */ - if (s2io_set_swapper(nic)) { + /* to set the swapper control on the card */ + if(s2io_set_swapper(nic)) { DBG_PRINT(ERR_DBG,"ERROR: Setting Swapper failed\n"); return -1; } @@ -639,8 +647,8 @@ static int init_nic(struct s2io_nic *nic) /* Remove XGXS from reset state */ val64 = 0; writeq(val64, &bar0->sw_reset); - val64 = readq(&bar0->sw_reset); msleep(500); + val64 = readq(&bar0->sw_reset); /* Enable Receiving broadcasts */ add = &bar0->mac_cfg; @@ -660,18 +668,18 @@ static int init_nic(struct s2io_nic *nic) val64 = dev->mtu; writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len); - /* - * Configuring the XAUI Interface of Xena. + /* + * Configuring the XAUI Interface of Xena. * *************************************** - * To Configure the Xena's XAUI, one has to write a series - * of 64 bit values into two registers in a particular - * sequence. Hence a macro 'SWITCH_SIGN' has been defined - * which will be defined in the array of configuration values - * (default_dtx_cfg & default_mdio_cfg) at appropriate places - * to switch writing from one regsiter to another. We continue + * To Configure the Xena's XAUI, one has to write a series + * of 64 bit values into two registers in a particular + * sequence. Hence a macro 'SWITCH_SIGN' has been defined + * which will be defined in the array of configuration values + * (default_dtx_cfg & default_mdio_cfg) at appropriate places + * to switch writing from one regsiter to another. We continue * writing these values until we encounter the 'END_SIGN' macro. - * For example, After making a series of 21 writes into - * dtx_control register the 'SWITCH_SIGN' appears and hence we + * For example, After making a series of 21 writes into + * dtx_control register the 'SWITCH_SIGN' appears and hence we * start writing into mdio_control until we encounter END_SIGN. */ while (1) { @@ -752,8 +760,8 @@ static int init_nic(struct s2io_nic *nic) DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n", &bar0->tx_fifo_partition_0, (unsigned long long) val64); - /* - * Initialization of Tx_PA_CONFIG register to ignore packet + /* + * Initialization of Tx_PA_CONFIG register to ignore packet * integrity checking. */ val64 = readq(&bar0->tx_pa_cfg); @@ -770,54 +778,54 @@ static int init_nic(struct s2io_nic *nic) } writeq(val64, &bar0->rx_queue_priority); - /* - * Allocating equal share of memory to all the + /* + * Allocating equal share of memory to all the * configured Rings. */ val64 = 0; + mem_size = 64; for (i = 0; i < config->rx_ring_num; i++) { switch (i) { case 0: - mem_share = (64 / config->rx_ring_num + - 64 % config->rx_ring_num); + mem_share = (mem_size / config->rx_ring_num + + mem_size % config->rx_ring_num); val64 |= RX_QUEUE_CFG_Q0_SZ(mem_share); continue; case 1: - mem_share = (64 / config->rx_ring_num); + mem_share = (mem_size / config->rx_ring_num); val64 |= RX_QUEUE_CFG_Q1_SZ(mem_share); continue; case 2: - mem_share = (64 / config->rx_ring_num); + mem_share = (mem_size / config->rx_ring_num); val64 |= RX_QUEUE_CFG_Q2_SZ(mem_share); continue; case 3: - mem_share = (64 / config->rx_ring_num); + mem_share = (mem_size / config->rx_ring_num); val64 |= RX_QUEUE_CFG_Q3_SZ(mem_share); continue; case 4: - mem_share = (64 / config->rx_ring_num); + mem_share = (mem_size / config->rx_ring_num); val64 |= RX_QUEUE_CFG_Q4_SZ(mem_share); continue; case 5: - mem_share = (64 / config->rx_ring_num); + mem_share = (mem_size / config->rx_ring_num); val64 |= RX_QUEUE_CFG_Q5_SZ(mem_share); continue; case 6: - mem_share = (64 / config->rx_ring_num); + mem_share = (mem_size / config->rx_ring_num); val64 |= RX_QUEUE_CFG_Q6_SZ(mem_share); continue; case 7: - mem_share = (64 / config->rx_ring_num); + mem_share = (mem_size / config->rx_ring_num); val64 |= RX_QUEUE_CFG_Q7_SZ(mem_share); continue; } } writeq(val64, &bar0->rx_queue_cfg); - /* - * Initializing the Tx round robin registers to 0. - * Filling Tx and Rx round robin registers as per the - * number of FIFOs and Rings is still TODO. + /* Initializing the Tx round robin registers to 0 + * filling tx and rx round robin registers as per + * the number of FIFOs and Rings is still TODO */ writeq(0, &bar0->tx_w_round_robin_0); writeq(0, &bar0->tx_w_round_robin_1); @@ -825,30 +833,30 @@ static int init_nic(struct s2io_nic *nic) writeq(0, &bar0->tx_w_round_robin_3); writeq(0, &bar0->tx_w_round_robin_4); - /* + /* * TODO - * Disable Rx steering. Hard coding all packets be steered to - * Queue 0 for now. + * Disable Rx steering. Hard coding all packets to be steered to + * Queue 0 for now. */ val64 = 0x8080808080808080ULL; writeq(val64, &bar0->rts_qos_steering); /* UDP Fix */ val64 = 0; - for (i = 1; i < 8; i++) + for (i = 0; i < 8; i++) writeq(val64, &bar0->rts_frm_len_n[i]); - /* Set rts_frm_len register for fifo 0 */ - writeq(MAC_RTS_FRM_LEN_SET(dev->mtu + 22), - &bar0->rts_frm_len_n[0]); + /* Set the default rts frame length for ring0 */ + writeq(MAC_RTS_FRM_LEN_SET(dev->mtu+22), + &bar0->rts_frm_len_n[0]); - /* Enable statistics */ + /* Program statistics memory */ writeq(mac_control->stats_mem_phy, &bar0->stat_addr); val64 = SET_UPDT_PERIOD(Stats_refresh_time) | STAT_CFG_STAT_RO | STAT_CFG_STAT_EN; writeq(val64, &bar0->stat_cfg); - /* + /* * Initializing the sampling rate for the device to calculate the * bandwidth utilization. */ @@ -857,11 +865,12 @@ static int init_nic(struct s2io_nic *nic) writeq(val64, &bar0->mac_link_util); - /* - * Initializing the Transmit and Receive Traffic Interrupt + /* + * Initializing the Transmit and Receive Traffic Interrupt * Scheme. */ - /* TTI Initialization. Default Tx timer gets us about + /* + * TTI Initialization. Default Tx timer gets us about * 250 interrupts per sec. Continuous interrupts are enabled * by default. */ @@ -880,7 +889,7 @@ static int init_nic(struct s2io_nic *nic) val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD; writeq(val64, &bar0->tti_command_mem); - /* + /* * Once the operation completes, the Strobe bit of the command * register will be reset. We poll for this particular condition * We wait for a maximum of 500ms for the operation to complete, @@ -917,7 +926,7 @@ static int init_nic(struct s2io_nic *nic) val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD; writeq(val64, &bar0->rti_command_mem); - /* + /* * Once the operation completes, the Strobe bit of the command * register will be reset. We poll for this particular condition * We wait for a maximum of 500ms for the operation to complete, @@ -926,7 +935,7 @@ static int init_nic(struct s2io_nic *nic) time = 0; while (TRUE) { val64 = readq(&bar0->rti_command_mem); - if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) { + if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) { break; } if (time > 10) { @@ -938,15 +947,15 @@ static int init_nic(struct s2io_nic *nic) msleep(50); } - /* - * Initializing proper values as Pause threshold into all + /* + * Initializing proper values as Pause threshold into all * the 8 Queues on Rx side. */ writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q0q3); writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7); /* Disable RMAC PAD STRIPPING */ - add = &bar0->mac_cfg; + add = (void *) &bar0->mac_cfg; val64 = readq(&bar0->mac_cfg); val64 &= ~(MAC_CFG_RMAC_STRIP_PAD); writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); @@ -955,8 +964,8 @@ static int init_nic(struct s2io_nic *nic) writel((u32) (val64 >> 32), (add + 4)); val64 = readq(&bar0->mac_cfg); - /* - * Set the time value to be inserted in the pause frame + /* + * Set the time value to be inserted in the pause frame * generated by xena. */ val64 = readq(&bar0->rmac_pause_cfg); @@ -964,7 +973,7 @@ static int init_nic(struct s2io_nic *nic) val64 |= RMAC_PAUSE_HG_PTIME(nic->mac_control.rmac_pause_time); writeq(val64, &bar0->rmac_pause_cfg); - /* + /* * Set the Threshold Limit for Generating the pause frame * If the amount of data in any Queue exceeds ratio of * (mac_control.mc_pause_threshold_q0q3 or q4q7)/256 @@ -988,8 +997,8 @@ static int init_nic(struct s2io_nic *nic) } writeq(val64, &bar0->mc_pause_thresh_q4q7); - /* - * TxDMA will stop Read request if the number of read split has + /* + * TxDMA will stop Read request if the number of read split has * exceeded the limit pointed by shared_splits */ val64 = readq(&bar0->pic_control); @@ -999,14 +1008,14 @@ static int init_nic(struct s2io_nic *nic) return SUCCESS; } -/** - * en_dis_able_nic_intrs - Enable or Disable the interrupts +/** + * en_dis_able_nic_intrs - Enable or Disable the interrupts * @nic: device private variable, * @mask: A mask indicating which Intr block must be modified and, * @flag: A flag indicating whether to enable or disable the Intrs. * Description: This function will either disable or enable the interrupts - * depending on the flag argument. The mask argument can be used to - * enable/disable any Intr block. + * depending on the flag argument. The mask argument can be used to + * enable/disable any Intr block. * Return Value: NONE. */ @@ -1024,20 +1033,20 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) temp64 = readq(&bar0->general_int_mask); temp64 &= ~((u64) val64); writeq(temp64, &bar0->general_int_mask); - /* + /* * Disabled all PCIX, Flash, MDIO, IIC and GPIO - * interrupts for now. - * TODO + * interrupts for now. + * TODO */ writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask); - /* + /* * No MSI Support is available presently, so TTI and * RTI interrupts are also disabled. */ } else if (flag == DISABLE_INTRS) { - /* - * Disable PIC Intrs in the general - * intr mask register + /* + * Disable PIC Intrs in the general + * intr mask register */ writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask); temp64 = readq(&bar0->general_int_mask); @@ -1055,27 +1064,27 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) temp64 = readq(&bar0->general_int_mask); temp64 &= ~((u64) val64); writeq(temp64, &bar0->general_int_mask); - /* - * Keep all interrupts other than PFC interrupt + /* + * Keep all interrupts other than PFC interrupt * and PCC interrupt disabled in DMA level. */ val64 = DISABLE_ALL_INTRS & ~(TXDMA_PFC_INT_M | TXDMA_PCC_INT_M); writeq(val64, &bar0->txdma_int_mask); - /* - * Enable only the MISC error 1 interrupt in PFC block + /* + * Enable only the MISC error 1 interrupt in PFC block */ val64 = DISABLE_ALL_INTRS & (~PFC_MISC_ERR_1); writeq(val64, &bar0->pfc_err_mask); - /* - * Enable only the FB_ECC error interrupt in PCC block + /* + * Enable only the FB_ECC error interrupt in PCC block */ val64 = DISABLE_ALL_INTRS & (~PCC_FB_ECC_ERR); writeq(val64, &bar0->pcc_err_mask); } else if (flag == DISABLE_INTRS) { - /* - * Disable TxDMA Intrs in the general intr mask - * register + /* + * Disable TxDMA Intrs in the general intr mask + * register */ writeq(DISABLE_ALL_INTRS, &bar0->txdma_int_mask); writeq(DISABLE_ALL_INTRS, &bar0->pfc_err_mask); @@ -1093,15 +1102,15 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) temp64 = readq(&bar0->general_int_mask); temp64 &= ~((u64) val64); writeq(temp64, &bar0->general_int_mask); - /* - * All RxDMA block interrupts are disabled for now - * TODO + /* + * All RxDMA block interrupts are disabled for now + * TODO */ writeq(DISABLE_ALL_INTRS, &bar0->rxdma_int_mask); } else if (flag == DISABLE_INTRS) { - /* - * Disable RxDMA Intrs in the general intr mask - * register + /* + * Disable RxDMA Intrs in the general intr mask + * register */ writeq(DISABLE_ALL_INTRS, &bar0->rxdma_int_mask); temp64 = readq(&bar0->general_int_mask); @@ -1118,8 +1127,8 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) temp64 = readq(&bar0->general_int_mask); temp64 &= ~((u64) val64); writeq(temp64, &bar0->general_int_mask); - /* - * All MAC block error interrupts are disabled for now + /* + * All MAC block error interrupts are disabled for now * except the link status change interrupt. * TODO */ @@ -1132,8 +1141,8 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) val64 &= ~((u64) RMAC_LINK_STATE_CHANGE_INT); writeq(val64, &bar0->mac_rmac_err_mask); } else if (flag == DISABLE_INTRS) { - /* - * Disable MAC Intrs in the general intr mask register + /* + * Disable MAC Intrs in the general intr mask register */ writeq(DISABLE_ALL_INTRS, &bar0->mac_int_mask); writeq(DISABLE_ALL_INTRS, @@ -1152,14 +1161,14 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) temp64 = readq(&bar0->general_int_mask); temp64 &= ~((u64) val64); writeq(temp64, &bar0->general_int_mask); - /* + /* * All XGXS block error interrupts are disabled for now - * TODO + * TODO */ writeq(DISABLE_ALL_INTRS, &bar0->xgxs_int_mask); } else if (flag == DISABLE_INTRS) { - /* - * Disable MC Intrs in the general intr mask register + /* + * Disable MC Intrs in the general intr mask register */ writeq(DISABLE_ALL_INTRS, &bar0->xgxs_int_mask); temp64 = readq(&bar0->general_int_mask); @@ -1175,9 +1184,9 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) temp64 = readq(&bar0->general_int_mask); temp64 &= ~((u64) val64); writeq(temp64, &bar0->general_int_mask); - /* - * All MC block error interrupts are disabled for now - * TODO + /* + * All MC block error interrupts are disabled for now. + * TODO */ writeq(DISABLE_ALL_INTRS, &bar0->mc_int_mask); } else if (flag == DISABLE_INTRS) { @@ -1199,14 +1208,14 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) temp64 = readq(&bar0->general_int_mask); temp64 &= ~((u64) val64); writeq(temp64, &bar0->general_int_mask); - /* + /* * Enable all the Tx side interrupts - * writing 0 Enables all 64 TX interrupt levels + * writing 0 Enables all 64 TX interrupt levels */ writeq(0x0, &bar0->tx_traffic_mask); } else if (flag == DISABLE_INTRS) { - /* - * Disable Tx Traffic Intrs in the general intr mask + /* + * Disable Tx Traffic Intrs in the general intr mask * register. */ writeq(DISABLE_ALL_INTRS, &bar0->tx_traffic_mask); @@ -1226,8 +1235,8 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) /* writing 0 Enables all 8 RX interrupt levels */ writeq(0x0, &bar0->rx_traffic_mask); } else if (flag == DISABLE_INTRS) { - /* - * Disable Rx Traffic Intrs in the general intr mask + /* + * Disable Rx Traffic Intrs in the general intr mask * register. */ writeq(DISABLE_ALL_INTRS, &bar0->rx_traffic_mask); @@ -1238,20 +1247,42 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) } } -/** - * verify_xena_quiescence - Checks whether the H/W is ready +static int check_prc_pcc_state(u64 val64, int flag) +{ + int ret = 0; + + if (flag == FALSE) { + if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) && + ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == + ADAPTER_STATUS_RC_PRC_QUIESCENT)) { + ret = 1; + } + } else { + if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) == + ADAPTER_STATUS_RMAC_PCC_IDLE) && + (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) || + ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == + ADAPTER_STATUS_RC_PRC_QUIESCENT))) { + ret = 1; + } + } + + return ret; +} +/** + * verify_xena_quiescence - Checks whether the H/W is ready * @val64 : Value read from adapter status register. * @flag : indicates if the adapter enable bit was ever written once * before. * Description: Returns whether the H/W is ready to go or not. Depending - * on whether adapter enable bit was written or not the comparison + * on whether adapter enable bit was written or not the comparison * differs and the calling function passes the input argument flag to * indicate this. - * Return: 1 If xena is quiescence + * Return: 1 If xena is quiescence * 0 If Xena is not quiescence */ -static int verify_xena_quiescence(u64 val64, int flag) +static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag) { int ret = 0; u64 tmp64 = ~((u64) val64); @@ -1263,25 +1294,7 @@ static int verify_xena_quiescence(u64 val64, int flag) ADAPTER_STATUS_PIC_QUIESCENT | ADAPTER_STATUS_MC_DRAM_READY | ADAPTER_STATUS_MC_QUEUES_READY | ADAPTER_STATUS_M_PLL_LOCK | ADAPTER_STATUS_P_PLL_LOCK))) { - if (flag == FALSE) { - if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) && - ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == - ADAPTER_STATUS_RC_PRC_QUIESCENT)) { - - ret = 1; - - } - } else { - if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) == - ADAPTER_STATUS_RMAC_PCC_IDLE) && - (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) || - ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == - ADAPTER_STATUS_RC_PRC_QUIESCENT))) { - - ret = 1; - - } - } + ret = check_prc_pcc_state(val64, flag); } return ret; @@ -1290,12 +1303,12 @@ static int verify_xena_quiescence(u64 val64, int flag) /** * fix_mac_address - Fix for Mac addr problem on Alpha platforms * @sp: Pointer to device specifc structure - * Description : + * Description : * New procedure to clear mac address reading problems on Alpha platforms * */ -static void fix_mac_address(nic_t * sp) +void fix_mac_address(nic_t * sp) { XENA_dev_config_t __iomem *bar0 = sp->bar0; u64 val64; @@ -1303,20 +1316,21 @@ static void fix_mac_address(nic_t * sp) while (fix_mac[i] != END_SIGN) { writeq(fix_mac[i++], &bar0->gpio_control); + udelay(10); val64 = readq(&bar0->gpio_control); } } /** - * start_nic - Turns the device on + * start_nic - Turns the device on * @nic : device private variable. - * Description: - * This function actually turns the device on. Before this function is - * called,all Registers are configured from their reset states - * and shared memory is allocated but the NIC is still quiescent. On + * Description: + * This function actually turns the device on. Before this function is + * called,all Registers are configured from their reset states + * and shared memory is allocated but the NIC is still quiescent. On * calling this function, the device interrupts are cleared and the NIC is * literally switched on by writing into the adapter control register. - * Return Value: + * Return Value: * SUCCESS on success and -1 on failure. */ @@ -1325,8 +1339,8 @@ static int start_nic(struct s2io_nic *nic) XENA_dev_config_t __iomem *bar0 = nic->bar0; struct net_device *dev = nic->dev; register u64 val64 = 0; - u16 interruptible, i; - u16 subid; + u16 interruptible; + u16 subid, i; mac_info_t *mac_control; struct config_param *config; @@ -1335,7 +1349,7 @@ static int start_nic(struct s2io_nic *nic) /* PRC Initialization and configuration */ for (i = 0; i < config->rx_ring_num; i++) { - writeq((u64) nic->rx_blocks[i][0].block_dma_addr, + writeq((u64) mac_control->rings[i].rx_blocks[0].block_dma_addr, &bar0->prc_rxd0_n[i]); val64 = readq(&bar0->prc_ctrl_n[i]); @@ -1354,7 +1368,7 @@ static int start_nic(struct s2io_nic *nic) writeq(val64, &bar0->rx_pa_cfg); #endif - /* + /* * Enabling MC-RLDRAM. After enabling the device, we timeout * for around 100ms, which is approximately the time required * for the device to be ready for operation. @@ -1364,27 +1378,27 @@ static int start_nic(struct s2io_nic *nic) SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF); val64 = readq(&bar0->mc_rldram_mrs); - msleep(100); /* Delay by around 100 ms. */ + msleep(100); /* Delay by around 100 ms. */ /* Enabling ECC Protection. */ val64 = readq(&bar0->adapter_control); val64 &= ~ADAPTER_ECC_EN; writeq(val64, &bar0->adapter_control); - /* - * Clearing any possible Link state change interrupts that + /* + * Clearing any possible Link state change interrupts that * could have popped up just before Enabling the card. */ val64 = readq(&bar0->mac_rmac_err_reg); if (val64) writeq(val64, &bar0->mac_rmac_err_reg); - /* - * Verify if the device is ready to be enabled, if so enable + /* + * Verify if the device is ready to be enabled, if so enable * it. */ val64 = readq(&bar0->adapter_status); - if (!verify_xena_quiescence(val64, nic->device_enabled_once)) { + if (!verify_xena_quiescence(nic, val64, nic->device_enabled_once)) { DBG_PRINT(ERR_DBG, "%s: device is not ready, ", dev->name); DBG_PRINT(ERR_DBG, "Adapter status reads: 0x%llx\n", (unsigned long long) val64); @@ -1396,12 +1410,12 @@ static int start_nic(struct s2io_nic *nic) RX_MAC_INTR; en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS); - /* + /* * With some switches, link might be already up at this point. - * Because of this weird behavior, when we enable laser, - * we may not get link. We need to handle this. We cannot - * figure out which switch is misbehaving. So we are forced to - * make a global change. + * Because of this weird behavior, when we enable laser, + * we may not get link. We need to handle this. We cannot + * figure out which switch is misbehaving. So we are forced to + * make a global change. */ /* Enabling Laser. */ @@ -1416,17 +1430,17 @@ static int start_nic(struct s2io_nic *nic) val64 |= 0x0000800000000000ULL; writeq(val64, &bar0->gpio_control); val64 = 0x0411040400000000ULL; - writeq(val64, (void __iomem *) bar0 + 0x2700); + writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700)); } - /* - * Don't see link state interrupts on certain switches, so + /* + * Don't see link state interrupts on certain switches, so * directly scheduling a link state task from here. */ schedule_work(&nic->set_link_task); - /* - * Here we are performing soft reset on XGXS to + /* + * Here we are performing soft reset on XGXS to * force link down. Since link is already up, we will get * link state change interrupt after this reset */ @@ -1443,12 +1457,12 @@ static int start_nic(struct s2io_nic *nic) return SUCCESS; } -/** - * free_tx_buffers - Free all queued Tx buffers +/** + * free_tx_buffers - Free all queued Tx buffers * @nic : device private variable. - * Description: + * Description: * Free all queued Tx buffers. - * Return Value: void + * Return Value: void */ static void free_tx_buffers(struct s2io_nic *nic) @@ -1466,7 +1480,7 @@ static void free_tx_buffers(struct s2io_nic *nic) for (i = 0; i < config->tx_fifo_num; i++) { for (j = 0; j < config->tx_cfg[i].fifo_len - 1; j++) { - txdp = (TxD_t *) nic->list_info[i][j]. + txdp = (TxD_t *) mac_control->fifos[i].list_info[j]. list_virt_addr; skb = (struct sk_buff *) ((unsigned long) txdp-> @@ -1482,16 +1496,16 @@ static void free_tx_buffers(struct s2io_nic *nic) DBG_PRINT(INTR_DBG, "%s:forcibly freeing %d skbs on FIFO%d\n", dev->name, cnt, i); - mac_control->tx_curr_get_info[i].offset = 0; - mac_control->tx_curr_put_info[i].offset = 0; + mac_control->fifos[i].tx_curr_get_info.offset = 0; + mac_control->fifos[i].tx_curr_put_info.offset = 0; } } -/** - * stop_nic - To stop the nic +/** + * stop_nic - To stop the nic * @nic ; device private variable. - * Description: - * This function does exactly the opposite of what the start_nic() + * Description: + * This function does exactly the opposite of what the start_nic() * function does. This function is called to stop the device. * Return Value: * void. @@ -1521,11 +1535,11 @@ static void stop_nic(struct s2io_nic *nic) } } -/** - * fill_rx_buffers - Allocates the Rx side skbs +/** + * fill_rx_buffers - Allocates the Rx side skbs * @nic: device private variable - * @ring_no: ring number - * Description: + * @ring_no: ring number + * Description: * The function allocates Rx side skbs and puts the physical * address of these buffers into the RxD buffer pointers, so that the NIC * can DMA the received frame into these locations. @@ -1533,8 +1547,8 @@ static void stop_nic(struct s2io_nic *nic) * 1. single buffer, * 2. three buffer and * 3. Five buffer modes. - * Each mode defines how many fragments the received frame will be split - * up into by the NIC. The frame is split into L3 header, L4 Header, + * Each mode defines how many fragments the received frame will be split + * up into by the NIC. The frame is split into L3 header, L4 Header, * L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself * is split into 3 fragments. As of now only single buffer mode is * supported. @@ -1542,7 +1556,7 @@ static void stop_nic(struct s2io_nic *nic) * SUCCESS on success or an appropriate -ve value on failure. */ -static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) +int fill_rx_buffers(struct s2io_nic *nic, int ring_no) { struct net_device *dev = nic->dev; struct sk_buff *skb; @@ -1550,14 +1564,13 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) int off, off1, size, block_no, block_no1; int offset, offset1; u32 alloc_tab = 0; - u32 alloc_cnt = nic->pkt_cnt[ring_no] - - atomic_read(&nic->rx_bufs_left[ring_no]); + u32 alloc_cnt; mac_info_t *mac_control; struct config_param *config; #ifdef CONFIG_2BUFF_MODE RxD_t *rxdpnext; int nextblk; - unsigned long tmp; + u64 tmp; buffAdd_t *ba; dma_addr_t rxdpphys; #endif @@ -1567,17 +1580,18 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) mac_control = &nic->mac_control; config = &nic->config; - + alloc_cnt = mac_control->rings[ring_no].pkt_cnt - + atomic_read(&nic->rx_bufs_left[ring_no]); size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE + HEADER_802_2_SIZE + HEADER_SNAP_SIZE; while (alloc_tab < alloc_cnt) { - block_no = mac_control->rx_curr_put_info[ring_no]. + block_no = mac_control->rings[ring_no].rx_curr_put_info. block_index; - block_no1 = mac_control->rx_curr_get_info[ring_no]. + block_no1 = mac_control->rings[ring_no].rx_curr_get_info. block_index; - off = mac_control->rx_curr_put_info[ring_no].offset; - off1 = mac_control->rx_curr_get_info[ring_no].offset; + off = mac_control->rings[ring_no].rx_curr_put_info.offset; + off1 = mac_control->rings[ring_no].rx_curr_get_info.offset; #ifndef CONFIG_2BUFF_MODE offset = block_no * (MAX_RXDS_PER_BLOCK + 1) + off; offset1 = block_no1 * (MAX_RXDS_PER_BLOCK + 1) + off1; @@ -1586,7 +1600,7 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) offset1 = block_no1 * (MAX_RXDS_PER_BLOCK) + off1; #endif - rxdp = nic->rx_blocks[ring_no][block_no]. + rxdp = mac_control->rings[ring_no].rx_blocks[block_no]. block_virt_addr + off; if ((offset == offset1) && (rxdp->Host_Control)) { DBG_PRINT(INTR_DBG, "%s: Get and Put", dev->name); @@ -1595,15 +1609,15 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) } #ifndef CONFIG_2BUFF_MODE if (rxdp->Control_1 == END_OF_BLOCK) { - mac_control->rx_curr_put_info[ring_no]. + mac_control->rings[ring_no].rx_curr_put_info. block_index++; - mac_control->rx_curr_put_info[ring_no]. - block_index %= nic->block_count[ring_no]; - block_no = mac_control->rx_curr_put_info - [ring_no].block_index; + mac_control->rings[ring_no].rx_curr_put_info. + block_index %= mac_control->rings[ring_no].block_count; + block_no = mac_control->rings[ring_no].rx_curr_put_info. + block_index; off++; off %= (MAX_RXDS_PER_BLOCK + 1); - mac_control->rx_curr_put_info[ring_no].offset = + mac_control->rings[ring_no].rx_curr_put_info.offset = off; rxdp = (RxD_t *) ((unsigned long) rxdp->Control_2); DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n", @@ -1611,30 +1625,30 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) } #ifndef CONFIG_S2IO_NAPI spin_lock_irqsave(&nic->put_lock, flags); - nic->put_pos[ring_no] = + mac_control->rings[ring_no].put_pos = (block_no * (MAX_RXDS_PER_BLOCK + 1)) + off; spin_unlock_irqrestore(&nic->put_lock, flags); #endif #else if (rxdp->Host_Control == END_OF_BLOCK) { - mac_control->rx_curr_put_info[ring_no]. + mac_control->rings[ring_no].rx_curr_put_info. block_index++; - mac_control->rx_curr_put_info[ring_no]. - block_index %= nic->block_count[ring_no]; - block_no = mac_control->rx_curr_put_info - [ring_no].block_index; + mac_control->rings[ring_no].rx_curr_put_info.block_index + %= mac_control->rings[ring_no].block_count; + block_no = mac_control->rings[ring_no].rx_curr_put_info + .block_index; off = 0; DBG_PRINT(INTR_DBG, "%s: block%d at: 0x%llx\n", dev->name, block_no, (unsigned long long) rxdp->Control_1); - mac_control->rx_curr_put_info[ring_no].offset = + mac_control->rings[ring_no].rx_curr_put_info.offset = off; - rxdp = nic->rx_blocks[ring_no][block_no]. + rxdp = mac_control->rings[ring_no].rx_blocks[block_no]. block_virt_addr; } #ifndef CONFIG_S2IO_NAPI spin_lock_irqsave(&nic->put_lock, flags); - nic->put_pos[ring_no] = (block_no * + mac_control->rings[ring_no].put_pos = (block_no * (MAX_RXDS_PER_BLOCK + 1)) + off; spin_unlock_irqrestore(&nic->put_lock, flags); #endif @@ -1646,27 +1660,27 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) if (rxdp->Control_2 & BIT(0)) #endif { - mac_control->rx_curr_put_info[ring_no]. + mac_control->rings[ring_no].rx_curr_put_info. offset = off; goto end; } #ifdef CONFIG_2BUFF_MODE - /* - * RxDs Spanning cache lines will be replenished only - * if the succeeding RxD is also owned by Host. It - * will always be the ((8*i)+3) and ((8*i)+6) - * descriptors for the 48 byte descriptor. The offending + /* + * RxDs Spanning cache lines will be replenished only + * if the succeeding RxD is also owned by Host. It + * will always be the ((8*i)+3) and ((8*i)+6) + * descriptors for the 48 byte descriptor. The offending * decsriptor is of-course the 3rd descriptor. */ - rxdpphys = nic->rx_blocks[ring_no][block_no]. + rxdpphys = mac_control->rings[ring_no].rx_blocks[block_no]. block_dma_addr + (off * sizeof(RxD_t)); if (((u64) (rxdpphys)) % 128 > 80) { - rxdpnext = nic->rx_blocks[ring_no][block_no]. + rxdpnext = mac_control->rings[ring_no].rx_blocks[block_no]. block_virt_addr + (off + 1); if (rxdpnext->Host_Control == END_OF_BLOCK) { nextblk = (block_no + 1) % - (nic->block_count[ring_no]); - rxdpnext = nic->rx_blocks[ring_no] + (mac_control->rings[ring_no].block_count); + rxdpnext = mac_control->rings[ring_no].rx_blocks [nextblk].block_virt_addr; } if (rxdpnext->Control_2 & BIT(0)) @@ -1695,9 +1709,9 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) rxdp->Control_1 |= RXD_OWN_XENA; off++; off %= (MAX_RXDS_PER_BLOCK + 1); - mac_control->rx_curr_put_info[ring_no].offset = off; + mac_control->rings[ring_no].rx_curr_put_info.offset = off; #else - ba = &nic->ba[ring_no][block_no][off]; + ba = &mac_control->rings[ring_no].ba[block_no][off]; skb_reserve(skb, BUF0_LEN); tmp = ((unsigned long) skb->data & ALIGN_SIZE); if (tmp) @@ -1721,8 +1735,9 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) rxdp->Host_Control = (u64) ((unsigned long) (skb)); rxdp->Control_1 |= RXD_OWN_XENA; off++; - mac_control->rx_curr_put_info[ring_no].offset = off; + mac_control->rings[ring_no].rx_curr_put_info.offset = off; #endif + atomic_inc(&nic->rx_bufs_left[ring_no]); alloc_tab++; } @@ -1732,9 +1747,9 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) } /** - * free_rx_buffers - Frees all Rx buffers + * free_rx_buffers - Frees all Rx buffers * @sp: device private variable. - * Description: + * Description: * This function will free all Rx buffers allocated by host. * Return Value: * NONE. @@ -1758,7 +1773,8 @@ static void free_rx_buffers(struct s2io_nic *sp) for (i = 0; i < config->rx_ring_num; i++) { for (j = 0, blk = 0; j < config->rx_cfg[i].num_rxd; j++) { off = j % (MAX_RXDS_PER_BLOCK + 1); - rxdp = sp->rx_blocks[i][blk].block_virt_addr + off; + rxdp = mac_control->rings[i].rx_blocks[blk]. + block_virt_addr + off; #ifndef CONFIG_2BUFF_MODE if (rxdp->Control_1 == END_OF_BLOCK) { @@ -1793,7 +1809,7 @@ static void free_rx_buffers(struct s2io_nic *sp) HEADER_SNAP_SIZE, PCI_DMA_FROMDEVICE); #else - ba = &sp->ba[i][blk][off]; + ba = &mac_control->rings[i].ba[blk][off]; pci_unmap_single(sp->pdev, (dma_addr_t) rxdp->Buffer0_ptr, BUF0_LEN, @@ -1813,10 +1829,10 @@ static void free_rx_buffers(struct s2io_nic *sp) } memset(rxdp, 0, sizeof(RxD_t)); } - mac_control->rx_curr_put_info[i].block_index = 0; - mac_control->rx_curr_get_info[i].block_index = 0; - mac_control->rx_curr_put_info[i].offset = 0; - mac_control->rx_curr_get_info[i].offset = 0; + mac_control->rings[i].rx_curr_put_info.block_index = 0; + mac_control->rings[i].rx_curr_get_info.block_index = 0; + mac_control->rings[i].rx_curr_put_info.offset = 0; + mac_control->rings[i].rx_curr_get_info.offset = 0; atomic_set(&sp->rx_bufs_left[i], 0); DBG_PRINT(INIT_DBG, "%s:Freed 0x%x Rx Buffers on ring%d\n", dev->name, buf_cnt, i); @@ -1826,7 +1842,7 @@ static void free_rx_buffers(struct s2io_nic *sp) /** * s2io_poll - Rx interrupt handler for NAPI support * @dev : pointer to the device structure. - * @budget : The number of packets that were budgeted to be processed + * @budget : The number of packets that were budgeted to be processed * during one pass through the 'Poll" function. * Description: * Comes into picture only if NAPI support has been incorporated. It does @@ -1836,160 +1852,35 @@ static void free_rx_buffers(struct s2io_nic *sp) * 0 on success and 1 if there are No Rx packets to be processed. */ -#ifdef CONFIG_S2IO_NAPI +#if defined(CONFIG_S2IO_NAPI) static int s2io_poll(struct net_device *dev, int *budget) { nic_t *nic = dev->priv; - XENA_dev_config_t __iomem *bar0 = nic->bar0; - int pkts_to_process = *budget, pkt_cnt = 0; - register u64 val64 = 0; - rx_curr_get_info_t get_info, put_info; - int i, get_block, put_block, get_offset, put_offset, ring_bufs; -#ifndef CONFIG_2BUFF_MODE - u16 val16, cksum; -#endif - struct sk_buff *skb; - RxD_t *rxdp; + int pkt_cnt = 0, org_pkts_to_process; mac_info_t *mac_control; struct config_param *config; -#ifdef CONFIG_2BUFF_MODE - buffAdd_t *ba; -#endif + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + u64 val64; + int i; mac_control = &nic->mac_control; config = &nic->config; - if (pkts_to_process > dev->quota) - pkts_to_process = dev->quota; + nic->pkts_to_process = *budget; + if (nic->pkts_to_process > dev->quota) + nic->pkts_to_process = dev->quota; + org_pkts_to_process = nic->pkts_to_process; val64 = readq(&bar0->rx_traffic_int); writeq(val64, &bar0->rx_traffic_int); for (i = 0; i < config->rx_ring_num; i++) { - get_info = mac_control->rx_curr_get_info[i]; - get_block = get_info.block_index; - put_info = mac_control->rx_curr_put_info[i]; - put_block = put_info.block_index; - ring_bufs = config->rx_cfg[i].num_rxd; - rxdp = nic->rx_blocks[i][get_block].block_virt_addr + - get_info.offset; -#ifndef CONFIG_2BUFF_MODE - get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) + - get_info.offset; - put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) + - put_info.offset; - while ((!(rxdp->Control_1 & RXD_OWN_XENA)) && - (((get_offset + 1) % ring_bufs) != put_offset)) { - if (--pkts_to_process < 0) { - goto no_rx; - } - if (rxdp->Control_1 == END_OF_BLOCK) { - rxdp = - (RxD_t *) ((unsigned long) rxdp-> - Control_2); - get_info.offset++; - get_info.offset %= - (MAX_RXDS_PER_BLOCK + 1); - get_block++; - get_block %= nic->block_count[i]; - mac_control->rx_curr_get_info[i]. - offset = get_info.offset; - mac_control->rx_curr_get_info[i]. - block_index = get_block; - continue; - } - get_offset = - (get_block * (MAX_RXDS_PER_BLOCK + 1)) + - get_info.offset; - skb = - (struct sk_buff *) ((unsigned long) rxdp-> - Host_Control); - if (skb == NULL) { - DBG_PRINT(ERR_DBG, "%s: The skb is ", - dev->name); - DBG_PRINT(ERR_DBG, "Null in Rx Intr\n"); - goto no_rx; - } - val64 = RXD_GET_BUFFER0_SIZE(rxdp->Control_2); - val16 = (u16) (val64 >> 48); - cksum = RXD_GET_L4_CKSUM(rxdp->Control_1); - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer0_ptr, - dev->mtu + - HEADER_ETHERNET_II_802_3_SIZE + - HEADER_802_2_SIZE + - HEADER_SNAP_SIZE, - PCI_DMA_FROMDEVICE); - rx_osm_handler(nic, val16, rxdp, i); - pkt_cnt++; - get_info.offset++; - get_info.offset %= (MAX_RXDS_PER_BLOCK + 1); - rxdp = - nic->rx_blocks[i][get_block].block_virt_addr + - get_info.offset; - mac_control->rx_curr_get_info[i].offset = - get_info.offset; + rx_intr_handler(&mac_control->rings[i]); + pkt_cnt = org_pkts_to_process - nic->pkts_to_process; + if (!nic->pkts_to_process) { + /* Quota for the current iteration has been met */ + goto no_rx; } -#else - get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) + - get_info.offset; - put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) + - put_info.offset; - while (((!(rxdp->Control_1 & RXD_OWN_XENA)) && - !(rxdp->Control_2 & BIT(0))) && - (((get_offset + 1) % ring_bufs) != put_offset)) { - if (--pkts_to_process < 0) { - goto no_rx; - } - skb = (struct sk_buff *) ((unsigned long) - rxdp->Host_Control); - if (skb == NULL) { - DBG_PRINT(ERR_DBG, "%s: The skb is ", - dev->name); - DBG_PRINT(ERR_DBG, "Null in Rx Intr\n"); - goto no_rx; - } - - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer0_ptr, - BUF0_LEN, PCI_DMA_FROMDEVICE); - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer1_ptr, - BUF1_LEN, PCI_DMA_FROMDEVICE); - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer2_ptr, - dev->mtu + BUF0_LEN + 4, - PCI_DMA_FROMDEVICE); - ba = &nic->ba[i][get_block][get_info.offset]; - - rx_osm_handler(nic, rxdp, i, ba); - - get_info.offset++; - mac_control->rx_curr_get_info[i].offset = - get_info.offset; - rxdp = - nic->rx_blocks[i][get_block].block_virt_addr + - get_info.offset; - - if (get_info.offset && - (!(get_info.offset % MAX_RXDS_PER_BLOCK))) { - get_info.offset = 0; - mac_control->rx_curr_get_info[i]. - offset = get_info.offset; - get_block++; - get_block %= nic->block_count[i]; - mac_control->rx_curr_get_info[i]. - block_index = get_block; - rxdp = - nic->rx_blocks[i][get_block]. - block_virt_addr; - } - get_offset = - (get_block * (MAX_RXDS_PER_BLOCK + 1)) + - get_info.offset; - pkt_cnt++; - } -#endif } if (!pkt_cnt) pkt_cnt = 1; @@ -2009,7 +1900,7 @@ static int s2io_poll(struct net_device *dev, int *budget) en_dis_able_nic_intrs(nic, RX_TRAFFIC_INTR, ENABLE_INTRS); return 0; - no_rx: +no_rx: dev->quota -= pkt_cnt; *budget -= pkt_cnt; @@ -2022,277 +1913,213 @@ static int s2io_poll(struct net_device *dev, int *budget) } return 1; } -#else -/** +#endif + +/** * rx_intr_handler - Rx interrupt handler * @nic: device private variable. - * Description: - * If the interrupt is because of a received frame or if the + * Description: + * If the interrupt is because of a received frame or if the * receive ring contains fresh as yet un-processed frames,this function is - * called. It picks out the RxD at which place the last Rx processing had - * stopped and sends the skb to the OSM's Rx handler and then increments + * called. It picks out the RxD at which place the last Rx processing had + * stopped and sends the skb to the OSM's Rx handler and then increments * the offset. * Return Value: * NONE. */ - -static void rx_intr_handler(struct s2io_nic *nic) +static void rx_intr_handler(ring_info_t *ring_data) { + nic_t *nic = ring_data->nic; struct net_device *dev = (struct net_device *) nic->dev; - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; + int get_block, get_offset, put_block, put_offset, ring_bufs; rx_curr_get_info_t get_info, put_info; RxD_t *rxdp; struct sk_buff *skb; -#ifndef CONFIG_2BUFF_MODE - u16 val16, cksum; -#endif - register u64 val64 = 0; - int get_block, get_offset, put_block, put_offset, ring_bufs; - int i, pkt_cnt = 0; - mac_info_t *mac_control; - struct config_param *config; -#ifdef CONFIG_2BUFF_MODE - buffAdd_t *ba; +#ifndef CONFIG_S2IO_NAPI + int pkt_cnt = 0; #endif + register u64 val64; - mac_control = &nic->mac_control; - config = &nic->config; - - /* - * rx_traffic_int reg is an R1 register, hence we read and write back - * the samevalue in the register to clear it. + /* + * rx_traffic_int reg is an R1 register, hence we read and write + * back the same value in the register to clear it */ - val64 = readq(&bar0->rx_traffic_int); - writeq(val64, &bar0->rx_traffic_int); + val64 = readq(&bar0->tx_traffic_int); + writeq(val64, &bar0->tx_traffic_int); - for (i = 0; i < config->rx_ring_num; i++) { - get_info = mac_control->rx_curr_get_info[i]; - get_block = get_info.block_index; - put_info = mac_control->rx_curr_put_info[i]; - put_block = put_info.block_index; - ring_bufs = config->rx_cfg[i].num_rxd; - rxdp = nic->rx_blocks[i][get_block].block_virt_addr + + get_info = ring_data->rx_curr_get_info; + get_block = get_info.block_index; + put_info = ring_data->rx_curr_put_info; + put_block = put_info.block_index; + ring_bufs = get_info.ring_len+1; + rxdp = ring_data->rx_blocks[get_block].block_virt_addr + get_info.offset; -#ifndef CONFIG_2BUFF_MODE - get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) + - get_info.offset; - spin_lock(&nic->put_lock); - put_offset = nic->put_pos[i]; - spin_unlock(&nic->put_lock); - while ((!(rxdp->Control_1 & RXD_OWN_XENA)) && - (((get_offset + 1) % ring_bufs) != put_offset)) { - if (rxdp->Control_1 == END_OF_BLOCK) { - rxdp = (RxD_t *) ((unsigned long) - rxdp->Control_2); - get_info.offset++; - get_info.offset %= - (MAX_RXDS_PER_BLOCK + 1); - get_block++; - get_block %= nic->block_count[i]; - mac_control->rx_curr_get_info[i]. - offset = get_info.offset; - mac_control->rx_curr_get_info[i]. - block_index = get_block; - continue; - } - get_offset = - (get_block * (MAX_RXDS_PER_BLOCK + 1)) + - get_info.offset; - skb = (struct sk_buff *) ((unsigned long) - rxdp->Host_Control); - if (skb == NULL) { - DBG_PRINT(ERR_DBG, "%s: The skb is ", - dev->name); - DBG_PRINT(ERR_DBG, "Null in Rx Intr\n"); - return; - } - val64 = RXD_GET_BUFFER0_SIZE(rxdp->Control_2); - val16 = (u16) (val64 >> 48); - cksum = RXD_GET_L4_CKSUM(rxdp->Control_1); - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer0_ptr, - dev->mtu + - HEADER_ETHERNET_II_802_3_SIZE + - HEADER_802_2_SIZE + - HEADER_SNAP_SIZE, - PCI_DMA_FROMDEVICE); - rx_osm_handler(nic, val16, rxdp, i); - get_info.offset++; - get_info.offset %= (MAX_RXDS_PER_BLOCK + 1); - rxdp = - nic->rx_blocks[i][get_block].block_virt_addr + - get_info.offset; - mac_control->rx_curr_get_info[i].offset = - get_info.offset; - pkt_cnt++; - if ((indicate_max_pkts) - && (pkt_cnt > indicate_max_pkts)) - break; + get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) + + get_info.offset; +#ifndef CONFIG_S2IO_NAPI + spin_lock(&nic->put_lock); + put_offset = ring_data->put_pos; + spin_unlock(&nic->put_lock); +#else + put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) + + put_info.offset; +#endif + while ((!(rxdp->Control_1 & RXD_OWN_XENA)) && +#ifdef CONFIG_2BUFF_MODE + (!rxdp->Control_2 & BIT(0)) && +#endif + (((get_offset + 1) % ring_bufs) != put_offset)) { + skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control); + if (skb == NULL) { + DBG_PRINT(ERR_DBG, "%s: The skb is ", + dev->name); + DBG_PRINT(ERR_DBG, "Null in Rx Intr\n"); + return; } +#ifndef CONFIG_2BUFF_MODE + pci_unmap_single(nic->pdev, (dma_addr_t) + rxdp->Buffer0_ptr, + dev->mtu + + HEADER_ETHERNET_II_802_3_SIZE + + HEADER_802_2_SIZE + + HEADER_SNAP_SIZE, + PCI_DMA_FROMDEVICE); #else - get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) + + pci_unmap_single(nic->pdev, (dma_addr_t) + rxdp->Buffer0_ptr, + BUF0_LEN, PCI_DMA_FROMDEVICE); + pci_unmap_single(nic->pdev, (dma_addr_t) + rxdp->Buffer1_ptr, + BUF1_LEN, PCI_DMA_FROMDEVICE); + pci_unmap_single(nic->pdev, (dma_addr_t) + rxdp->Buffer2_ptr, + dev->mtu + BUF0_LEN + 4, + PCI_DMA_FROMDEVICE); +#endif + rx_osm_handler(ring_data, rxdp); + get_info.offset++; + ring_data->rx_curr_get_info.offset = get_info.offset; - spin_lock(&nic->put_lock); - put_offset = nic->put_pos[i]; - spin_unlock(&nic->put_lock); - while (((!(rxdp->Control_1 & RXD_OWN_XENA)) && - !(rxdp->Control_2 & BIT(0))) && - (((get_offset + 1) % ring_bufs) != put_offset)) { - skb = (struct sk_buff *) ((unsigned long) - rxdp->Host_Control); - if (skb == NULL) { - DBG_PRINT(ERR_DBG, "%s: The skb is ", - dev->name); - DBG_PRINT(ERR_DBG, "Null in Rx Intr\n"); - return; - } - - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer0_ptr, - BUF0_LEN, PCI_DMA_FROMDEVICE); - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer1_ptr, - BUF1_LEN, PCI_DMA_FROMDEVICE); - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer2_ptr, - dev->mtu + BUF0_LEN + 4, - PCI_DMA_FROMDEVICE); - ba = &nic->ba[i][get_block][get_info.offset]; - - rx_osm_handler(nic, rxdp, i, ba); - - get_info.offset++; - mac_control->rx_curr_get_info[i].offset = - get_info.offset; - rxdp = - nic->rx_blocks[i][get_block].block_virt_addr + - get_info.offset; + rxdp = ring_data->rx_blocks[get_block].block_virt_addr + + get_info.offset; + if (get_info.offset && + (!(get_info.offset % MAX_RXDS_PER_BLOCK))) { + get_info.offset = 0; + ring_data->rx_curr_get_info.offset + = get_info.offset; + get_block++; + get_block %= ring_data->block_count; + ring_data->rx_curr_get_info.block_index + = get_block; + rxdp = ring_data->rx_blocks[get_block].block_virt_addr; + } - if (get_info.offset && - (!(get_info.offset % MAX_RXDS_PER_BLOCK))) { - get_info.offset = 0; - mac_control->rx_curr_get_info[i]. - offset = get_info.offset; - get_block++; - get_block %= nic->block_count[i]; - mac_control->rx_curr_get_info[i]. - block_index = get_block; - rxdp = - nic->rx_blocks[i][get_block]. - block_virt_addr; - } - get_offset = - (get_block * (MAX_RXDS_PER_BLOCK + 1)) + + get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) + get_info.offset; - pkt_cnt++; - if ((indicate_max_pkts) - && (pkt_cnt > indicate_max_pkts)) - break; - } -#endif +#ifdef CONFIG_S2IO_NAPI + nic->pkts_to_process -= 1; + if (!nic->pkts_to_process) + break; +#else + pkt_cnt++; if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts)) break; +#endif } } -#endif -/** + +/** * tx_intr_handler - Transmit interrupt handler * @nic : device private variable - * Description: - * If an interrupt was raised to indicate DMA complete of the - * Tx packet, this function is called. It identifies the last TxD - * whose buffer was freed and frees all skbs whose data have already + * Description: + * If an interrupt was raised to indicate DMA complete of the + * Tx packet, this function is called. It identifies the last TxD + * whose buffer was freed and frees all skbs whose data have already * DMA'ed into the NICs internal memory. * Return Value: * NONE */ -static void tx_intr_handler(struct s2io_nic *nic) +static void tx_intr_handler(fifo_info_t *fifo_data) { + nic_t *nic = fifo_data->nic; XENA_dev_config_t __iomem *bar0 = nic->bar0; struct net_device *dev = (struct net_device *) nic->dev; tx_curr_get_info_t get_info, put_info; struct sk_buff *skb; TxD_t *txdlp; - register u64 val64 = 0; - int i; u16 j, frg_cnt; - mac_info_t *mac_control; - struct config_param *config; - - mac_control = &nic->mac_control; - config = &nic->config; + register u64 val64 = 0; - /* - * tx_traffic_int reg is an R1 register, hence we read and write - * back the samevalue in the register to clear it. + /* + * tx_traffic_int reg is an R1 register, hence we read and write + * back the same value in the register to clear it */ val64 = readq(&bar0->tx_traffic_int); writeq(val64, &bar0->tx_traffic_int); - for (i = 0; i < config->tx_fifo_num; i++) { - get_info = mac_control->tx_curr_get_info[i]; - put_info = mac_control->tx_curr_put_info[i]; - txdlp = (TxD_t *) nic->list_info[i][get_info.offset]. - list_virt_addr; - while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) && - (get_info.offset != put_info.offset) && - (txdlp->Host_Control)) { - /* Check for TxD errors */ - if (txdlp->Control_1 & TXD_T_CODE) { - unsigned long long err; - err = txdlp->Control_1 & TXD_T_CODE; - DBG_PRINT(ERR_DBG, "***TxD error %llx\n", - err); - } + get_info = fifo_data->tx_curr_get_info; + put_info = fifo_data->tx_curr_put_info; + txdlp = (TxD_t *) fifo_data->list_info[get_info.offset]. + list_virt_addr; + while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) && + (get_info.offset != put_info.offset) && + (txdlp->Host_Control)) { + /* Check for TxD errors */ + if (txdlp->Control_1 & TXD_T_CODE) { + unsigned long long err; + err = txdlp->Control_1 & TXD_T_CODE; + DBG_PRINT(ERR_DBG, "***TxD error %llx\n", + err); + } - skb = (struct sk_buff *) ((unsigned long) - txdlp->Host_Control); - if (skb == NULL) { - DBG_PRINT(ERR_DBG, "%s: Null skb ", - dev->name); - DBG_PRINT(ERR_DBG, "in Tx Free Intr\n"); - return; - } - nic->tx_pkt_count++; - - frg_cnt = skb_shinfo(skb)->nr_frags; - - /* For unfragmented skb */ - pci_unmap_single(nic->pdev, (dma_addr_t) - txdlp->Buffer_Pointer, - skb->len - skb->data_len, - PCI_DMA_TODEVICE); - if (frg_cnt) { - TxD_t *temp = txdlp; - txdlp++; - for (j = 0; j < frg_cnt; j++, txdlp++) { - skb_frag_t *frag = - &skb_shinfo(skb)->frags[j]; - pci_unmap_page(nic->pdev, - (dma_addr_t) - txdlp-> - Buffer_Pointer, - frag->size, - PCI_DMA_TODEVICE); - } - txdlp = temp; + skb = (struct sk_buff *) ((unsigned long) + txdlp->Host_Control); + if (skb == NULL) { + DBG_PRINT(ERR_DBG, "%s: Null skb ", + __FUNCTION__); + DBG_PRINT(ERR_DBG, "in Tx Free Intr\n"); + return; + } + + frg_cnt = skb_shinfo(skb)->nr_frags; + nic->tx_pkt_count++; + + pci_unmap_single(nic->pdev, (dma_addr_t) + txdlp->Buffer_Pointer, + skb->len - skb->data_len, + PCI_DMA_TODEVICE); + if (frg_cnt) { + TxD_t *temp; + temp = txdlp; + txdlp++; + for (j = 0; j < frg_cnt; j++, txdlp++) { + skb_frag_t *frag = + &skb_shinfo(skb)->frags[j]; + pci_unmap_page(nic->pdev, + (dma_addr_t) + txdlp-> + Buffer_Pointer, + frag->size, + PCI_DMA_TODEVICE); } - memset(txdlp, 0, - (sizeof(TxD_t) * config->max_txds)); - - /* Updating the statistics block */ - nic->stats.tx_packets++; - nic->stats.tx_bytes += skb->len; - dev_kfree_skb_irq(skb); - - get_info.offset++; - get_info.offset %= get_info.fifo_len + 1; - txdlp = (TxD_t *) nic->list_info[i] - [get_info.offset].list_virt_addr; - mac_control->tx_curr_get_info[i].offset = - get_info.offset; + txdlp = temp; } + memset(txdlp, 0, + (sizeof(TxD_t) * fifo_data->max_txds)); + + /* Updating the statistics block */ + nic->stats.tx_packets++; + nic->stats.tx_bytes += skb->len; + dev_kfree_skb_irq(skb); + + get_info.offset++; + get_info.offset %= get_info.fifo_len + 1; + txdlp = (TxD_t *) fifo_data->list_info + [get_info.offset].list_virt_addr; + fifo_data->tx_curr_get_info.offset = + get_info.offset; } spin_lock(&nic->tx_lock); @@ -2301,13 +2128,13 @@ static void tx_intr_handler(struct s2io_nic *nic) spin_unlock(&nic->tx_lock); } -/** +/** * alarm_intr_handler - Alarm Interrrupt handler * @nic: device private variable - * Description: If the interrupt was neither because of Rx packet or Tx + * Description: If the interrupt was neither because of Rx packet or Tx * complete, this function is called. If the interrupt was to indicate - * a loss of link, the OSM link status handler is invoked for any other - * alarm interrupt the block that raised the interrupt is displayed + * a loss of link, the OSM link status handler is invoked for any other + * alarm interrupt the block that raised the interrupt is displayed * and a H/W reset is issued. * Return Value: * NONE @@ -2338,7 +2165,7 @@ static void alarm_intr_handler(struct s2io_nic *nic) /* * Also as mentioned in the latest Errata sheets if the PCC_FB_ECC * Error occurs, the adapter will be recycled by disabling the - * adapter enable bit and enabling it again after the device + * adapter enable bit and enabling it again after the device * becomes Quiescent. */ val64 = readq(&bar0->pcc_err_reg); @@ -2354,18 +2181,18 @@ static void alarm_intr_handler(struct s2io_nic *nic) /* Other type of interrupts are not being handled now, TODO */ } -/** +/** * wait_for_cmd_complete - waits for a command to complete. - * @sp : private member of the device structure, which is a pointer to the + * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. - * Description: Function that waits for a command to Write into RMAC - * ADDR DATA registers to be completed and returns either success or - * error depending on whether the command was complete or not. + * Description: Function that waits for a command to Write into RMAC + * ADDR DATA registers to be completed and returns either success or + * error depending on whether the command was complete or not. * Return value: * SUCCESS on success and FAILURE on failure. */ -static int wait_for_cmd_complete(nic_t * sp) +int wait_for_cmd_complete(nic_t * sp) { XENA_dev_config_t __iomem *bar0 = sp->bar0; int ret = FAILURE, cnt = 0; @@ -2385,17 +2212,17 @@ static int wait_for_cmd_complete(nic_t * sp) return ret; } -/** - * s2io_reset - Resets the card. +/** + * s2io_reset - Resets the card. * @sp : private member of the device structure. * Description: Function to Reset the card. This function then also - * restores the previously saved PCI configuration space registers as + * restores the previously saved PCI configuration space registers as * the card reset also resets the configuration space. * Return value: * void. */ -static void s2io_reset(nic_t * sp) +void s2io_reset(nic_t * sp) { XENA_dev_config_t __iomem *bar0 = sp->bar0; u64 val64; @@ -2404,10 +2231,10 @@ static void s2io_reset(nic_t * sp) val64 = SW_RESET_ALL; writeq(val64, &bar0->sw_reset); - /* - * At this stage, if the PCI write is indeed completed, the - * card is reset and so is the PCI Config space of the device. - * So a read cannot be issued at this stage on any of the + /* + * At this stage, if the PCI write is indeed completed, the + * card is reset and so is the PCI Config space of the device. + * So a read cannot be issued at this stage on any of the * registers to ensure the write into "sw_reset" register * has gone through. * Question: Is there any system call that will explicitly force @@ -2420,10 +2247,17 @@ static void s2io_reset(nic_t * sp) /* Restore the PCI state saved during initializarion. */ pci_restore_state(sp->pdev); + s2io_init_pci(sp); msleep(250); + /* Set swapper to enable I/O register access */ + s2io_set_swapper(sp); + + /* Reset device statistics maintained by OS */ + memset(&sp->stats, 0, sizeof (struct net_device_stats)); + /* SXE-002: Configure link and activity LED to turn it off */ subid = sp->pdev->subsystem_device; if ((subid & 0xFF) >= 0x07) { @@ -2431,29 +2265,29 @@ static void s2io_reset(nic_t * sp) val64 |= 0x0000800000000000ULL; writeq(val64, &bar0->gpio_control); val64 = 0x0411040400000000ULL; - writeq(val64, (void __iomem *) bar0 + 0x2700); + writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700)); } sp->device_enabled_once = FALSE; } /** - * s2io_set_swapper - to set the swapper controle on the card - * @sp : private member of the device structure, + * s2io_set_swapper - to set the swapper controle on the card + * @sp : private member of the device structure, * pointer to the s2io_nic structure. - * Description: Function to set the swapper control on the card + * Description: Function to set the swapper control on the card * correctly depending on the 'endianness' of the system. * Return value: * SUCCESS on success and FAILURE on failure. */ -static int s2io_set_swapper(nic_t * sp) +int s2io_set_swapper(nic_t * sp) { struct net_device *dev = sp->dev; XENA_dev_config_t __iomem *bar0 = sp->bar0; u64 val64, valt, valr; - /* + /* * Set proper endian settings and verify the same by reading * the PIF Feed-back register. */ @@ -2505,8 +2339,9 @@ static int s2io_set_swapper(nic_t * sp) i++; } if(i == 4) { + unsigned long long x = val64; DBG_PRINT(ERR_DBG, "Write failed, Xmsi_addr "); - DBG_PRINT(ERR_DBG, "reads:0x%llx\n",val64); + DBG_PRINT(ERR_DBG, "reads:0x%llx\n", x); return FAILURE; } } @@ -2514,8 +2349,8 @@ static int s2io_set_swapper(nic_t * sp) val64 &= 0xFFFF000000000000ULL; #ifdef __BIG_ENDIAN - /* - * The device by default set to a big endian format, so a + /* + * The device by default set to a big endian format, so a * big endian driver need not set anything. */ val64 |= (SWAPPER_CTRL_TXP_FE | @@ -2531,9 +2366,9 @@ static int s2io_set_swapper(nic_t * sp) SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE); writeq(val64, &bar0->swapper_ctrl); #else - /* + /* * Initially we enable all bits to make it accessible by the - * driver, then we selectively enable only those bits that + * driver, then we selectively enable only those bits that * we want to set. */ val64 |= (SWAPPER_CTRL_TXP_FE | @@ -2555,8 +2390,8 @@ static int s2io_set_swapper(nic_t * sp) #endif val64 = readq(&bar0->swapper_ctrl); - /* - * Verifying if endian settings are accurate by reading a + /* + * Verifying if endian settings are accurate by reading a * feedback register. */ val64 = readq(&bar0->pif_rd_swapper_fb); @@ -2576,25 +2411,25 @@ static int s2io_set_swapper(nic_t * sp) * Functions defined below concern the OS part of the driver * * ********************************************************* */ -/** +/** * s2io_open - open entry point of the driver * @dev : pointer to the device structure. * Description: * This function is the open entry point of the driver. It mainly calls a * function to allocate Rx buffers and inserts them into the buffer - * descriptors and then enables the Rx part of the NIC. + * descriptors and then enables the Rx part of the NIC. * Return value: * 0 on success and an appropriate (-)ve integer as defined in errno.h * file on failure. */ -static int s2io_open(struct net_device *dev) +int s2io_open(struct net_device *dev) { nic_t *sp = dev->priv; int err = 0; - /* - * Make sure you have link off by default every time + /* + * Make sure you have link off by default every time * Nic is initialized */ netif_carrier_off(dev); @@ -2604,27 +2439,34 @@ static int s2io_open(struct net_device *dev) if (s2io_card_up(sp)) { DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n", dev->name); - return -ENODEV; + err = -ENODEV; + goto hw_init_failed; } /* After proper initialization of H/W, register ISR */ - err = request_irq((int) sp->irq, s2io_isr, SA_SHIRQ, + err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ, sp->name, dev); if (err) { - s2io_reset(sp); DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n", dev->name); - return err; + goto isr_registration_failed; } if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) { DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n"); - s2io_reset(sp); - return -ENODEV; + err = -ENODEV; + goto setting_mac_address_failed; } netif_start_queue(dev); return 0; + +setting_mac_address_failed: + free_irq(sp->pdev->irq, dev); +isr_registration_failed: + s2io_reset(sp); +hw_init_failed: + return err; } /** @@ -2640,16 +2482,15 @@ static int s2io_open(struct net_device *dev) * file on failure. */ -static int s2io_close(struct net_device *dev) +int s2io_close(struct net_device *dev) { nic_t *sp = dev->priv; - flush_scheduled_work(); netif_stop_queue(dev); /* Reset card, kill tasklet and free Tx and Rx buffers. */ s2io_card_down(sp); - free_irq(dev->irq, dev); + free_irq(sp->pdev->irq, dev); sp->device_close_flag = TRUE; /* Device is shut down. */ return 0; } @@ -2667,7 +2508,7 @@ static int s2io_close(struct net_device *dev) * 0 on success & 1 on failure. */ -static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) +int s2io_xmit(struct sk_buff *skb, struct net_device *dev) { nic_t *sp = dev->priv; u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off; @@ -2685,22 +2526,24 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) mac_control = &sp->mac_control; config = &sp->config; - DBG_PRINT(TX_DBG, "%s: In S2IO Tx routine\n", dev->name); + DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name); spin_lock_irqsave(&sp->tx_lock, flags); - if (atomic_read(&sp->card_state) == CARD_DOWN) { - DBG_PRINT(ERR_DBG, "%s: Card going down for reset\n", + DBG_PRINT(TX_DBG, "%s: Card going down for reset\n", dev->name); spin_unlock_irqrestore(&sp->tx_lock, flags); - return 1; + dev_kfree_skb(skb); + return 0; } queue = 0; - put_off = (u16) mac_control->tx_curr_put_info[queue].offset; - get_off = (u16) mac_control->tx_curr_get_info[queue].offset; - txdp = (TxD_t *) sp->list_info[queue][put_off].list_virt_addr; - queue_len = mac_control->tx_curr_put_info[queue].fifo_len + 1; + put_off = (u16) mac_control->fifos[queue].tx_curr_put_info.offset; + get_off = (u16) mac_control->fifos[queue].tx_curr_get_info.offset; + txdp = (TxD_t *) mac_control->fifos[queue].list_info[put_off]. + list_virt_addr; + + queue_len = mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1; /* Avoid "put" pointer going beyond "get" pointer */ if (txdp->Host_Control || (((put_off + 1) % queue_len) == get_off)) { DBG_PRINT(ERR_DBG, "Error in xmit, No free TXDs.\n"); @@ -2720,9 +2563,9 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) frg_cnt = skb_shinfo(skb)->nr_frags; frg_len = skb->len - skb->data_len; - txdp->Host_Control = (unsigned long) skb; txdp->Buffer_Pointer = pci_map_single (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE); + txdp->Host_Control = (unsigned long) skb; if (skb->ip_summed == CHECKSUM_HW) { txdp->Control_2 |= (TXD_TX_CKO_IPV4_EN | TXD_TX_CKO_TCP_EN | @@ -2747,11 +2590,12 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) txdp->Control_1 |= TXD_GATHER_CODE_LAST; tx_fifo = mac_control->tx_FIFO_start[queue]; - val64 = sp->list_info[queue][put_off].list_phy_addr; + val64 = mac_control->fifos[queue].list_info[put_off].list_phy_addr; writeq(val64, &tx_fifo->TxDL_Pointer); val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST | TX_FIFO_LAST_LIST); + #ifdef NETIF_F_TSO if (mss) val64 |= TX_FIFO_SPECIAL_FUNC; @@ -2762,8 +2606,8 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) val64 = readq(&bar0->general_int_status); put_off++; - put_off %= mac_control->tx_curr_put_info[queue].fifo_len + 1; - mac_control->tx_curr_put_info[queue].offset = put_off; + put_off %= mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1; + mac_control->fifos[queue].tx_curr_put_info.offset = put_off; /* Avoid "put" pointer going beyond "get" pointer */ if (((put_off + 1) % queue_len) == get_off) { @@ -2784,13 +2628,13 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) * @irq: the irq of the device. * @dev_id: a void pointer to the dev structure of the NIC. * @pt_regs: pointer to the registers pushed on the stack. - * Description: This function is the ISR handler of the device. It - * identifies the reason for the interrupt and calls the relevant - * service routines. As a contongency measure, this ISR allocates the + * Description: This function is the ISR handler of the device. It + * identifies the reason for the interrupt and calls the relevant + * service routines. As a contongency measure, this ISR allocates the * recv buffers, if their numbers are below the panic value which is * presently set to 25% of the original number of rcv buffers allocated. * Return value: - * IRQ_HANDLED: will be returned if IRQ was handled by this routine + * IRQ_HANDLED: will be returned if IRQ was handled by this routine * IRQ_NONE: will be returned if interrupt is not from our device */ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) @@ -2798,9 +2642,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) struct net_device *dev = (struct net_device *) dev_id; nic_t *sp = dev->priv; XENA_dev_config_t __iomem *bar0 = sp->bar0; -#ifndef CONFIG_S2IO_NAPI - int i, ret; -#endif + int i; u64 reason = 0; mac_info_t *mac_control; struct config_param *config; @@ -2808,13 +2650,13 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) mac_control = &sp->mac_control; config = &sp->config; - /* + /* * Identify the cause for interrupt and call the appropriate * interrupt handler. Causes for the interrupt could be; * 1. Rx of packet. * 2. Tx complete. * 3. Link down. - * 4. Error in any functional blocks of the NIC. + * 4. Error in any functional blocks of the NIC. */ reason = readq(&bar0->general_int_status); @@ -2823,12 +2665,6 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) return IRQ_NONE; } - /* If Intr is because of Tx Traffic */ - if (reason & GEN_INTR_TXTRAFFIC) { - tx_intr_handler(sp); - } - - /* If Intr is because of an error */ if (reason & (GEN_ERROR_INTR)) alarm_intr_handler(sp); @@ -2843,17 +2679,26 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) #else /* If Intr is because of Rx Traffic */ if (reason & GEN_INTR_RXTRAFFIC) { - rx_intr_handler(sp); + for (i = 0; i < config->rx_ring_num; i++) { + rx_intr_handler(&mac_control->rings[i]); + } } #endif - /* - * If the Rx buffer count is below the panic threshold then - * reallocate the buffers from the interrupt handler itself, + /* If Intr is because of Tx Traffic */ + if (reason & GEN_INTR_TXTRAFFIC) { + for (i = 0; i < config->tx_fifo_num; i++) + tx_intr_handler(&mac_control->fifos[i]); + } + + /* + * If the Rx buffer count is below the panic threshold then + * reallocate the buffers from the interrupt handler itself, * else schedule a tasklet to reallocate the buffers. */ #ifndef CONFIG_S2IO_NAPI for (i = 0; i < config->rx_ring_num; i++) { + int ret; int rxb_size = atomic_read(&sp->rx_bufs_left[i]); int level = rx_buffer_level(sp, rxb_size, i); @@ -2878,29 +2723,33 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) } /** - * s2io_get_stats - Updates the device statistics structure. + * s2io_get_stats - Updates the device statistics structure. * @dev : pointer to the device structure. * Description: - * This function updates the device statistics structure in the s2io_nic + * This function updates the device statistics structure in the s2io_nic * structure and returns a pointer to the same. * Return value: * pointer to the updated net_device_stats structure. */ -static struct net_device_stats *s2io_get_stats(struct net_device *dev) +struct net_device_stats *s2io_get_stats(struct net_device *dev) { nic_t *sp = dev->priv; mac_info_t *mac_control; struct config_param *config; + mac_control = &sp->mac_control; config = &sp->config; - sp->stats.tx_errors = mac_control->stats_info->tmac_any_err_frms; - sp->stats.rx_errors = mac_control->stats_info->rmac_drop_frms; - sp->stats.multicast = mac_control->stats_info->rmac_vld_mcst_frms; + sp->stats.tx_errors = + le32_to_cpu(mac_control->stats_info->tmac_any_err_frms); + sp->stats.rx_errors = + le32_to_cpu(mac_control->stats_info->rmac_drop_frms); + sp->stats.multicast = + le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms); sp->stats.rx_length_errors = - mac_control->stats_info->rmac_long_frms; + le32_to_cpu(mac_control->stats_info->rmac_long_frms); return (&sp->stats); } @@ -2909,8 +2758,8 @@ static struct net_device_stats *s2io_get_stats(struct net_device *dev) * s2io_set_multicast - entry point for multicast address enable/disable. * @dev : pointer to the device structure * Description: - * This function is a driver entry point which gets called by the kernel - * whenever multicast addresses must be enabled/disabled. This also gets + * This function is a driver entry point which gets called by the kernel + * whenever multicast addresses must be enabled/disabled. This also gets * called to set/reset promiscuous mode. Depending on the deivce flag, we * determine, if multicast address must be enabled or if promiscuous mode * is to be disabled etc. @@ -3010,7 +2859,7 @@ static void s2io_set_multicast(struct net_device *dev) writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr), &bar0->rmac_addr_data0_mem); writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL), - &bar0->rmac_addr_data1_mem); + &bar0->rmac_addr_data1_mem); val64 = RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | RMAC_ADDR_CMD_MEM_OFFSET @@ -3039,8 +2888,7 @@ static void s2io_set_multicast(struct net_device *dev) writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr), &bar0->rmac_addr_data0_mem); writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL), - &bar0->rmac_addr_data1_mem); - + &bar0->rmac_addr_data1_mem); val64 = RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | RMAC_ADDR_CMD_MEM_OFFSET @@ -3059,12 +2907,12 @@ static void s2io_set_multicast(struct net_device *dev) } /** - * s2io_set_mac_addr - Programs the Xframe mac address + * s2io_set_mac_addr - Programs the Xframe mac address * @dev : pointer to the device structure. * @addr: a uchar pointer to the new mac address which is to be set. - * Description : This procedure will program the Xframe to receive + * Description : This procedure will program the Xframe to receive * frames with new Mac Address - * Return value: SUCCESS on success and an appropriate (-)ve integer + * Return value: SUCCESS on success and an appropriate (-)ve integer * as defined in errno.h file on failure. */ @@ -3075,10 +2923,10 @@ int s2io_set_mac_addr(struct net_device *dev, u8 * addr) register u64 val64, mac_addr = 0; int i; - /* + /* * Set the new MAC address as the new unicast filter and reflect this * change on the device address registered with the OS. It will be - * at offset 0. + * at offset 0. */ for (i = 0; i < ETH_ALEN; i++) { mac_addr <<= 8; @@ -3102,12 +2950,12 @@ int s2io_set_mac_addr(struct net_device *dev, u8 * addr) } /** - * s2io_ethtool_sset - Sets different link parameters. + * s2io_ethtool_sset - Sets different link parameters. * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. * @info: pointer to the structure with parameters given by ethtool to set * link information. * Description: - * The function sets different link parameters provided by the user onto + * The function sets different link parameters provided by the user onto * the NIC. * Return value: * 0 on success. @@ -3129,7 +2977,7 @@ static int s2io_ethtool_sset(struct net_device *dev, } /** - * s2io_ethtol_gset - Return link specific information. + * s2io_ethtol_gset - Return link specific information. * @sp : private member of the device structure, pointer to the * s2io_nic structure. * @info : pointer to the structure with parameters given by ethtool @@ -3161,8 +3009,8 @@ static int s2io_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info) } /** - * s2io_ethtool_gdrvinfo - Returns driver specific information. - * @sp : private member of the device structure, which is a pointer to the + * s2io_ethtool_gdrvinfo - Returns driver specific information. + * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. * @info : pointer to the structure with parameters given by ethtool to * return driver information. @@ -3190,9 +3038,9 @@ static void s2io_ethtool_gdrvinfo(struct net_device *dev, /** * s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer. - * @sp: private member of the device structure, which is a pointer to the + * @sp: private member of the device structure, which is a pointer to the * s2io_nic structure. - * @regs : pointer to the structure with parameters given by ethtool for + * @regs : pointer to the structure with parameters given by ethtool for * dumping the registers. * @reg_space: The input argumnet into which all the registers are dumped. * Description: @@ -3221,11 +3069,11 @@ static void s2io_ethtool_gregs(struct net_device *dev, /** * s2io_phy_id - timer function that alternates adapter LED. - * @data : address of the private member of the device structure, which + * @data : address of the private member of the device structure, which * is a pointer to the s2io_nic structure, provided as an u32. - * Description: This is actually the timer function that alternates the - * adapter LED bit of the adapter control bit to set/reset every time on - * invocation. The timer is set for 1/2 a second, hence tha NIC blinks + * Description: This is actually the timer function that alternates the + * adapter LED bit of the adapter control bit to set/reset every time on + * invocation. The timer is set for 1/2 a second, hence tha NIC blinks * once every second. */ static void s2io_phy_id(unsigned long data) @@ -3253,12 +3101,12 @@ static void s2io_phy_id(unsigned long data) * s2io_ethtool_idnic - To physically identify the nic on the system. * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. - * @id : pointer to the structure with identification parameters given by + * @id : pointer to the structure with identification parameters given by * ethtool. * Description: Used to physically identify the NIC on the system. - * The Link LED will blink for a time specified by the user for + * The Link LED will blink for a time specified by the user for * identification. - * NOTE: The Link has to be Up to be able to blink the LED. Hence + * NOTE: The Link has to be Up to be able to blink the LED. Hence * identification is possible only if it's link is up. * Return value: * int , returns 0 on success @@ -3288,9 +3136,9 @@ static int s2io_ethtool_idnic(struct net_device *dev, u32 data) } mod_timer(&sp->id_timer, jiffies); if (data) - msleep(data * 1000); + msleep_interruptible(data * HZ); else - msleep(0xFFFFFFFF); + msleep_interruptible(MAX_FLICKER_TIME); del_timer_sync(&sp->id_timer); if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) { @@ -3303,7 +3151,8 @@ static int s2io_ethtool_idnic(struct net_device *dev, u32 data) /** * s2io_ethtool_getpause_data -Pause frame frame generation and reception. - * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. + * @sp : private member of the device structure, which is a pointer to the + * s2io_nic structure. * @ep : pointer to the structure with pause parameters given by ethtool. * Description: * Returns the Pause frame generation and reception capability of the NIC. @@ -3327,7 +3176,7 @@ static void s2io_ethtool_getpause_data(struct net_device *dev, /** * s2io_ethtool_setpause_data - set/reset pause frame generation. - * @sp : private member of the device structure, which is a pointer to the + * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. * @ep : pointer to the structure with pause parameters given by ethtool. * Description: @@ -3338,7 +3187,7 @@ static void s2io_ethtool_getpause_data(struct net_device *dev, */ static int s2io_ethtool_setpause_data(struct net_device *dev, - struct ethtool_pauseparam *ep) + struct ethtool_pauseparam *ep) { u64 val64; nic_t *sp = dev->priv; @@ -3359,13 +3208,13 @@ static int s2io_ethtool_setpause_data(struct net_device *dev, /** * read_eeprom - reads 4 bytes of data from user given offset. - * @sp : private member of the device structure, which is a pointer to the + * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. * @off : offset at which the data must be written * @data : Its an output parameter where the data read at the given - * offset is stored. + * offset is stored. * Description: - * Will read 4 bytes of data from the user given offset and return the + * Will read 4 bytes of data from the user given offset and return the * read data. * NOTE: Will allow to read only part of the EEPROM visible through the * I2C bus. @@ -3406,7 +3255,7 @@ static int read_eeprom(nic_t * sp, int off, u32 * data) * s2io_nic structure. * @off : offset at which the data must be written * @data : The data that is to be written - * @cnt : Number of bytes of the data that are actually to be written into + * @cnt : Number of bytes of the data that are actually to be written into * the Eeprom. (max of 3) * Description: * Actually writes the relevant part of the data value into the Eeprom @@ -3443,7 +3292,7 @@ static int write_eeprom(nic_t * sp, int off, u32 data, int cnt) /** * s2io_ethtool_geeprom - reads the value stored in the Eeprom. * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. - * @eeprom : pointer to the user level structure provided by ethtool, + * @eeprom : pointer to the user level structure provided by ethtool, * containing all relevant information. * @data_buf : user defined value to be written into Eeprom. * Description: Reads the values stored in the Eeprom at given offset @@ -3454,7 +3303,7 @@ static int write_eeprom(nic_t * sp, int off, u32 data, int cnt) */ static int s2io_ethtool_geeprom(struct net_device *dev, - struct ethtool_eeprom *eeprom, u8 * data_buf) + struct ethtool_eeprom *eeprom, u8 * data_buf) { u32 data, i, valid; nic_t *sp = dev->priv; @@ -3479,7 +3328,7 @@ static int s2io_ethtool_geeprom(struct net_device *dev, * s2io_ethtool_seeprom - tries to write the user provided value in Eeprom * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. - * @eeprom : pointer to the user level structure provided by ethtool, + * @eeprom : pointer to the user level structure provided by ethtool, * containing all relevant information. * @data_buf ; user defined value to be written into Eeprom. * Description: @@ -3527,8 +3376,8 @@ static int s2io_ethtool_seeprom(struct net_device *dev, } /** - * s2io_register_test - reads and writes into all clock domains. - * @sp : private member of the device structure, which is a pointer to the + * s2io_register_test - reads and writes into all clock domains. + * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. * @data : variable that returns the result of each of the test conducted b * by the driver. @@ -3545,8 +3394,8 @@ static int s2io_register_test(nic_t * sp, uint64_t * data) u64 val64 = 0; int fail = 0; - val64 = readq(&bar0->pcc_enable); - if (val64 != 0xff00000000000000ULL) { + val64 = readq(&bar0->pif_rd_swapper_fb); + if (val64 != 0x123456789abcdefULL) { fail = 1; DBG_PRINT(INFO_DBG, "Read Test level 1 fails\n"); } @@ -3590,13 +3439,13 @@ static int s2io_register_test(nic_t * sp, uint64_t * data) } /** - * s2io_eeprom_test - to verify that EEprom in the xena can be programmed. + * s2io_eeprom_test - to verify that EEprom in the xena can be programmed. * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. * @data:variable that returns the result of each of the test conducted by * the driver. * Description: - * Verify that EEPROM in the xena can be programmed using I2C_CONTROL + * Verify that EEPROM in the xena can be programmed using I2C_CONTROL * register. * Return value: * 0 on success. @@ -3661,14 +3510,14 @@ static int s2io_eeprom_test(nic_t * sp, uint64_t * data) /** * s2io_bist_test - invokes the MemBist test of the card . - * @sp : private member of the device structure, which is a pointer to the + * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. - * @data:variable that returns the result of each of the test conducted by + * @data:variable that returns the result of each of the test conducted by * the driver. * Description: * This invokes the MemBist test of the card. We give around * 2 secs time for the Test to complete. If it's still not complete - * within this peiod, we consider that the test failed. + * within this peiod, we consider that the test failed. * Return value: * 0 on success and -1 on failure. */ @@ -3697,13 +3546,13 @@ static int s2io_bist_test(nic_t * sp, uint64_t * data) } /** - * s2io-link_test - verifies the link state of the nic - * @sp ; private member of the device structure, which is a pointer to the + * s2io-link_test - verifies the link state of the nic + * @sp ; private member of the device structure, which is a pointer to the * s2io_nic structure. * @data: variable that returns the result of each of the test conducted by * the driver. * Description: - * The function verifies the link state of the NIC and updates the input + * The function verifies the link state of the NIC and updates the input * argument 'data' appropriately. * Return value: * 0 on success. @@ -3722,13 +3571,13 @@ static int s2io_link_test(nic_t * sp, uint64_t * data) } /** - * s2io_rldram_test - offline test for access to the RldRam chip on the NIC - * @sp - private member of the device structure, which is a pointer to the + * s2io_rldram_test - offline test for access to the RldRam chip on the NIC + * @sp - private member of the device structure, which is a pointer to the * s2io_nic structure. - * @data - variable that returns the result of each of the test + * @data - variable that returns the result of each of the test * conducted by the driver. * Description: - * This is one of the offline test that tests the read and write + * This is one of the offline test that tests the read and write * access to the RldRam chip on the NIC. * Return value: * 0 on success. @@ -3833,7 +3682,7 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data) * s2io_nic structure. * @ethtest : pointer to a ethtool command specific structure that will be * returned to the user. - * @data : variable that returns the result of each of the test + * @data : variable that returns the result of each of the test * conducted by the driver. * Description: * This function conducts 6 tests ( 4 offline and 2 online) to determine @@ -3851,23 +3700,18 @@ static void s2io_ethtool_test(struct net_device *dev, if (ethtest->flags == ETH_TEST_FL_OFFLINE) { /* Offline Tests. */ - if (orig_state) { + if (orig_state) s2io_close(sp->dev); - s2io_set_swapper(sp); - } else - s2io_set_swapper(sp); if (s2io_register_test(sp, &data[0])) ethtest->flags |= ETH_TEST_FL_FAILED; s2io_reset(sp); - s2io_set_swapper(sp); if (s2io_rldram_test(sp, &data[3])) ethtest->flags |= ETH_TEST_FL_FAILED; s2io_reset(sp); - s2io_set_swapper(sp); if (s2io_eeprom_test(sp, &data[1])) ethtest->flags |= ETH_TEST_FL_FAILED; @@ -3951,20 +3795,19 @@ static void s2io_get_ethtool_stats(struct net_device *dev, tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_tcp); } -static int s2io_ethtool_get_regs_len(struct net_device *dev) +int s2io_ethtool_get_regs_len(struct net_device *dev) { return (XENA_REG_SPACE); } -static u32 s2io_ethtool_get_rx_csum(struct net_device * dev) +u32 s2io_ethtool_get_rx_csum(struct net_device * dev) { nic_t *sp = dev->priv; return (sp->rx_csum); } - -static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data) +int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data) { nic_t *sp = dev->priv; @@ -3975,19 +3818,17 @@ static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data) return 0; } - -static int s2io_get_eeprom_len(struct net_device *dev) +int s2io_get_eeprom_len(struct net_device *dev) { return (XENA_EEPROM_SPACE); } -static int s2io_ethtool_self_test_count(struct net_device *dev) +int s2io_ethtool_self_test_count(struct net_device *dev) { return (S2IO_TEST_LEN); } - -static void s2io_ethtool_get_strings(struct net_device *dev, - u32 stringset, u8 * data) +void s2io_ethtool_get_strings(struct net_device *dev, + u32 stringset, u8 * data) { switch (stringset) { case ETH_SS_TEST: @@ -3998,13 +3839,12 @@ static void s2io_ethtool_get_strings(struct net_device *dev, sizeof(ethtool_stats_keys)); } } - static int s2io_ethtool_get_stats_count(struct net_device *dev) { return (S2IO_STAT_LEN); } -static int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data) +int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data) { if (data) dev->features |= NETIF_F_IP_CSUM; @@ -4046,21 +3886,18 @@ static struct ethtool_ops netdev_ethtool_ops = { }; /** - * s2io_ioctl - Entry point for the Ioctl + * s2io_ioctl - Entry point for the Ioctl * @dev : Device pointer. * @ifr : An IOCTL specefic structure, that can contain a pointer to * a proprietary structure used to pass information to the driver. * @cmd : This is used to distinguish between the different commands that * can be passed to the IOCTL functions. * Description: - * This function has support for ethtool, adding multiple MAC addresses on - * the NIC and some DBG commands for the util tool. - * Return value: - * Currently the IOCTL supports no operations, hence by default this - * function returns OP NOT SUPPORTED value. + * Currently there are no special functionality supported in IOCTL, hence + * function always return EOPNOTSUPPORTED */ -static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { return -EOPNOTSUPP; } @@ -4076,7 +3913,7 @@ static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) * file on failure. */ -static int s2io_change_mtu(struct net_device *dev, int new_mtu) +int s2io_change_mtu(struct net_device *dev, int new_mtu) { nic_t *sp = dev->priv; XENA_dev_config_t __iomem *bar0 = sp->bar0; @@ -4084,7 +3921,7 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu) if (netif_running(dev)) { DBG_PRINT(ERR_DBG, "%s: Must be stopped to ", dev->name); - DBG_PRINT(ERR_DBG, "change its MTU \n"); + DBG_PRINT(ERR_DBG, "change its MTU\n"); return -EBUSY; } @@ -4108,9 +3945,9 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu) * @dev_adr : address of the device structure in dma_addr_t format. * Description: * This is the tasklet or the bottom half of the ISR. This is - * an extension of the ISR which is scheduled by the scheduler to be run + * an extension of the ISR which is scheduled by the scheduler to be run * when the load on the CPU is low. All low priority tasks of the ISR can - * be pushed into the tasklet. For now the tasklet is used only to + * be pushed into the tasklet. For now the tasklet is used only to * replenish the Rx buffers in the Rx buffer descriptors. * Return value: * void. @@ -4166,14 +4003,14 @@ static void s2io_set_link(unsigned long data) } subid = nic->pdev->subsystem_device; - /* - * Allow a small delay for the NICs self initiated + /* + * Allow a small delay for the NICs self initiated * cleanup to complete. */ msleep(100); val64 = readq(&bar0->adapter_status); - if (verify_xena_quiescence(val64, nic->device_enabled_once)) { + if (verify_xena_quiescence(nic, val64, nic->device_enabled_once)) { if (LINK_IS_UP(val64)) { val64 = readq(&bar0->adapter_control); val64 |= ADAPTER_CNTL_EN; @@ -4224,8 +4061,9 @@ static void s2io_card_down(nic_t * sp) register u64 val64 = 0; /* If s2io_set_link task is executing, wait till it completes. */ - while (test_and_set_bit(0, &(sp->link_state))) + while (test_and_set_bit(0, &(sp->link_state))) { msleep(50); + } atomic_set(&sp->card_state, CARD_DOWN); /* disable Tx and Rx traffic on the NIC */ @@ -4237,7 +4075,7 @@ static void s2io_card_down(nic_t * sp) /* Check if the device is Quiescent and then Reset the NIC */ do { val64 = readq(&bar0->adapter_status); - if (verify_xena_quiescence(val64, sp->device_enabled_once)) { + if (verify_xena_quiescence(sp, val64, sp->device_enabled_once)) { break; } @@ -4276,8 +4114,8 @@ static int s2io_card_up(nic_t * sp) return -ENODEV; } - /* - * Initializing the Rx buffers. For now we are considering only 1 + /* + * Initializing the Rx buffers. For now we are considering only 1 * Rx ring and initializing buffers into 30 Rx blocks */ mac_control = &sp->mac_control; @@ -4315,12 +4153,12 @@ static int s2io_card_up(nic_t * sp) return 0; } -/** +/** * s2io_restart_nic - Resets the NIC. * @data : long pointer to the device private structure * Description: * This function is scheduled to be run by the s2io_tx_watchdog - * function after 0.5 secs to reset the NIC. The idea is to reduce + * function after 0.5 secs to reset the NIC. The idea is to reduce * the run time of the watch dog routine which is run holding a * spin lock. */ @@ -4338,10 +4176,11 @@ static void s2io_restart_nic(unsigned long data) netif_wake_queue(dev); DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name); + } -/** - * s2io_tx_watchdog - Watchdog for transmit side. +/** + * s2io_tx_watchdog - Watchdog for transmit side. * @dev : Pointer to net device structure * Description: * This function is triggered if the Tx Queue is stopped @@ -4369,7 +4208,7 @@ static void s2io_tx_watchdog(struct net_device *dev) * @len : length of the packet * @cksum : FCS checksum of the frame. * @ring_no : the ring from which this RxD was extracted. - * Description: + * Description: * This function is called by the Tx interrupt serivce routine to perform * some OS related operations on the SKB before passing it to the upper * layers. It mainly checks if the checksum is OK, if so adds it to the @@ -4379,35 +4218,63 @@ static void s2io_tx_watchdog(struct net_device *dev) * Return value: * SUCCESS on success and -1 on failure. */ -#ifndef CONFIG_2BUFF_MODE -static int rx_osm_handler(nic_t * sp, u16 len, RxD_t * rxdp, int ring_no) -#else -static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no, - buffAdd_t * ba) -#endif +static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp) { + nic_t *sp = ring_data->nic; struct net_device *dev = (struct net_device *) sp->dev; - struct sk_buff *skb = - (struct sk_buff *) ((unsigned long) rxdp->Host_Control); + struct sk_buff *skb = (struct sk_buff *) + ((unsigned long) rxdp->Host_Control); + int ring_no = ring_data->ring_no; u16 l3_csum, l4_csum; #ifdef CONFIG_2BUFF_MODE - int buf0_len, buf2_len; + int buf0_len = RXD_GET_BUFFER0_SIZE(rxdp->Control_2); + int buf2_len = RXD_GET_BUFFER2_SIZE(rxdp->Control_2); + int get_block = ring_data->rx_curr_get_info.block_index; + int get_off = ring_data->rx_curr_get_info.offset; + buffAdd_t *ba = &ring_data->ba[get_block][get_off]; unsigned char *buff; +#else + u16 len = (u16) ((RXD_GET_BUFFER0_SIZE(rxdp->Control_2)) >> 48);; #endif + skb->dev = dev; + if (rxdp->Control_1 & RXD_T_CODE) { + unsigned long long err = rxdp->Control_1 & RXD_T_CODE; + DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%llx\n", + dev->name, err); + } - l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1); - if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) && (sp->rx_csum)) { + /* Updating statistics */ + rxdp->Host_Control = 0; + sp->rx_pkt_count++; + sp->stats.rx_packets++; +#ifndef CONFIG_2BUFF_MODE + sp->stats.rx_bytes += len; +#else + sp->stats.rx_bytes += buf0_len + buf2_len; +#endif + +#ifndef CONFIG_2BUFF_MODE + skb_put(skb, len); +#else + buff = skb_push(skb, buf0_len); + memcpy(buff, ba->ba_0, buf0_len); + skb_put(skb, buf2_len); +#endif + + if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) && + (sp->rx_csum)) { + l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1); l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1); if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) { - /* + /* * NIC verifies if the Checksum of the received * frame is Ok or not and accordingly returns * a flag in the RxD. */ skb->ip_summed = CHECKSUM_UNNECESSARY; } else { - /* - * Packet with erroneous checksum, let the + /* + * Packet with erroneous checksum, let the * upper layers deal with it. */ skb->ip_summed = CHECKSUM_NONE; @@ -4416,44 +4283,14 @@ static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no, skb->ip_summed = CHECKSUM_NONE; } - if (rxdp->Control_1 & RXD_T_CODE) { - unsigned long long err = rxdp->Control_1 & RXD_T_CODE; - DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%llx\n", - dev->name, err); - } -#ifdef CONFIG_2BUFF_MODE - buf0_len = RXD_GET_BUFFER0_SIZE(rxdp->Control_2); - buf2_len = RXD_GET_BUFFER2_SIZE(rxdp->Control_2); -#endif - - skb->dev = dev; -#ifndef CONFIG_2BUFF_MODE - skb_put(skb, len); skb->protocol = eth_type_trans(skb, dev); -#else - buff = skb_push(skb, buf0_len); - memcpy(buff, ba->ba_0, buf0_len); - skb_put(skb, buf2_len); - skb->protocol = eth_type_trans(skb, dev); -#endif - #ifdef CONFIG_S2IO_NAPI netif_receive_skb(skb); #else netif_rx(skb); #endif - dev->last_rx = jiffies; - sp->rx_pkt_count++; - sp->stats.rx_packets++; -#ifndef CONFIG_2BUFF_MODE - sp->stats.rx_bytes += len; -#else - sp->stats.rx_bytes += buf0_len + buf2_len; -#endif - atomic_dec(&sp->rx_bufs_left[ring_no]); - rxdp->Host_Control = 0; return SUCCESS; } @@ -4464,13 +4301,13 @@ static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no, * @link : inidicates whether link is UP/DOWN. * Description: * This function stops/starts the Tx queue depending on whether the link - * status of the NIC is is down or up. This is called by the Alarm - * interrupt handler whenever a link change interrupt comes up. + * status of the NIC is is down or up. This is called by the Alarm + * interrupt handler whenever a link change interrupt comes up. * Return value: * void. */ -static void s2io_link(nic_t * sp, int link) +void s2io_link(nic_t * sp, int link) { struct net_device *dev = (struct net_device *) sp->dev; @@ -4487,8 +4324,25 @@ static void s2io_link(nic_t * sp, int link) } /** - * s2io_init_pci -Initialization of PCI and PCI-X configuration registers . - * @sp : private member of the device structure, which is a pointer to the + * get_xena_rev_id - to identify revision ID of xena. + * @pdev : PCI Dev structure + * Description: + * Function to identify the Revision ID of xena. + * Return value: + * returns the revision ID of the device. + */ + +int get_xena_rev_id(struct pci_dev *pdev) +{ + u8 id = 0; + int ret; + ret = pci_read_config_byte(pdev, PCI_REVISION_ID, (u8 *) & id); + return id; +} + +/** + * s2io_init_pci -Initialization of PCI and PCI-X configuration registers . + * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. * Description: * This function initializes a few of the PCI and PCI-X configuration registers @@ -4499,15 +4353,15 @@ static void s2io_link(nic_t * sp, int link) static void s2io_init_pci(nic_t * sp) { - u16 pci_cmd = 0; + u16 pci_cmd = 0, pcix_cmd = 0; /* Enable Data Parity Error Recovery in PCI-X command register. */ pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - &(sp->pcix_cmd)); + &(pcix_cmd)); pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - (sp->pcix_cmd | 1)); + (pcix_cmd | 1)); pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - &(sp->pcix_cmd)); + &(pcix_cmd)); /* Set the PErr Response bit in PCI command register. */ pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd); @@ -4516,34 +4370,36 @@ static void s2io_init_pci(nic_t * sp) pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd); /* Set MMRB count to 1024 in PCI-X Command register. */ - sp->pcix_cmd &= 0xFFF3; - pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, (sp->pcix_cmd | (0x1 << 2))); /* MMRBC 1K */ + pcix_cmd &= 0xFFF3; + pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, + (pcix_cmd | (0x1 << 2))); /* MMRBC 1K */ pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - &(sp->pcix_cmd)); + &(pcix_cmd)); /* Setting Maximum outstanding splits based on system type. */ - sp->pcix_cmd &= 0xFF8F; - - sp->pcix_cmd |= XENA_MAX_OUTSTANDING_SPLITS(0x1); /* 2 splits. */ + pcix_cmd &= 0xFF8F; + pcix_cmd |= XENA_MAX_OUTSTANDING_SPLITS(0x1); /* 2 splits. */ pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - sp->pcix_cmd); + pcix_cmd); pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - &(sp->pcix_cmd)); + &(pcix_cmd)); + /* Forcibly disabling relaxed ordering capability of the card. */ - sp->pcix_cmd &= 0xfffd; + pcix_cmd &= 0xfffd; pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - sp->pcix_cmd); + pcix_cmd); pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - &(sp->pcix_cmd)); + &(pcix_cmd)); } MODULE_AUTHOR("Raghavendra Koushik "); MODULE_LICENSE("GPL"); module_param(tx_fifo_num, int, 0); -module_param_array(tx_fifo_len, int, NULL, 0); module_param(rx_ring_num, int, 0); -module_param_array(rx_ring_sz, int, NULL, 0); +module_param_array(tx_fifo_len, uint, NULL, 0); +module_param_array(rx_ring_sz, uint, NULL, 0); module_param(Stats_refresh_time, int, 0); +module_param_array(rts_frm_len, uint, NULL, 0); module_param(rmac_pause_time, int, 0); module_param(mc_pause_threshold_q0q3, int, 0); module_param(mc_pause_threshold_q4q7, int, 0); @@ -4553,15 +4409,16 @@ module_param(rmac_util_period, int, 0); #ifndef CONFIG_S2IO_NAPI module_param(indicate_max_pkts, int, 0); #endif + /** - * s2io_init_nic - Initialization of the adapter . + * s2io_init_nic - Initialization of the adapter . * @pdev : structure containing the PCI related information of the device. * @pre: List of PCI devices supported by the driver listed in s2io_tbl. * Description: * The function initializes an adapter identified by the pci_dec structure. - * All OS related initialization including memory and device structure and - * initlaization of the device private variable is done. Also the swapper - * control register is initialized to enable read and write into the I/O + * All OS related initialization including memory and device structure and + * initlaization of the device private variable is done. Also the swapper + * control register is initialized to enable read and write into the I/O * registers of the device. * Return value: * returns 0 on success and negative on failure. @@ -4572,7 +4429,6 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) { nic_t *sp; struct net_device *dev; - char *dev_name = "S2IO 10GE NIC"; int i, j, ret; int dma_flag = FALSE; u32 mac_up, mac_down; @@ -4582,9 +4438,9 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) mac_info_t *mac_control; struct config_param *config; - - DBG_PRINT(ERR_DBG, "Loading S2IO driver with %s\n", - s2io_driver_version); +#ifdef CONFIG_S2IO_NAPI + DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n"); +#endif if ((ret = pci_enable_device(pdev))) { DBG_PRINT(ERR_DBG, @@ -4595,7 +4451,6 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n"); dma_flag = TRUE; - if (pci_set_consistent_dma_mask (pdev, DMA_64BIT_MASK)) { DBG_PRINT(ERR_DBG, @@ -4635,21 +4490,17 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) memset(sp, 0, sizeof(nic_t)); sp->dev = dev; sp->pdev = pdev; - sp->vendor_id = pdev->vendor; - sp->device_id = pdev->device; sp->high_dma_flag = dma_flag; - sp->irq = pdev->irq; sp->device_enabled_once = FALSE; - strcpy(sp->name, dev_name); /* Initialize some PCI/PCI-X fields of the NIC. */ s2io_init_pci(sp); - /* + /* * Setting the device configuration parameters. - * Most of these parameters can be specified by the user during - * module insertion as they are module loadable parameters. If - * these parameters are not not specified during load time, they + * Most of these parameters can be specified by the user during + * module insertion as they are module loadable parameters. If + * these parameters are not not specified during load time, they * are initialized with default values. */ mac_control = &sp->mac_control; @@ -4663,6 +4514,10 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) config->tx_cfg[i].fifo_priority = i; } + /* mapping the QoS priority to the configured fifos */ + for (i = 0; i < MAX_TX_FIFOS; i++) + config->fifo_mapping[i] = fifo_map[config->tx_fifo_num][i]; + config->tx_intr_type = TXD_INT_TYPE_UTILZ; for (i = 0; i < config->tx_fifo_num; i++) { config->tx_cfg[i].f_no_snoop = @@ -4743,13 +4598,14 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) dev->do_ioctl = &s2io_ioctl; dev->change_mtu = &s2io_change_mtu; SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); + /* * will use eth_mac_addr() for dev->set_mac_address * mac address will be set every time dev->open() is called */ -#ifdef CONFIG_S2IO_NAPI +#if defined(CONFIG_S2IO_NAPI) dev->poll = s2io_poll; - dev->weight = 90; + dev->weight = 32; #endif dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; @@ -4776,22 +4632,14 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) goto set_swap_failed; } - /* Fix for all "FFs" MAC address problems observed on Alpha platforms */ + /* + * Fix for all "FFs" MAC address problems observed on + * Alpha platforms + */ fix_mac_address(sp); s2io_reset(sp); /* - * Setting swapper control on the NIC, so the MAC address can be read. - */ - if (s2io_set_swapper(sp)) { - DBG_PRINT(ERR_DBG, - "%s: S2IO: swapper settings are wrong\n", - dev->name); - ret = -EAGAIN; - goto set_swap_failed; - } - - /* * MAC address initialization. * For now only one mac address will be read and used. */ @@ -4828,23 +4676,22 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN); /* - * Initialize the tasklet status and link state flags + * Initialize the tasklet status and link state flags * and the card statte parameter */ atomic_set(&(sp->card_state), 0); sp->tasklet_status = 0; sp->link_state = 0; - /* Initialize spinlocks */ spin_lock_init(&sp->tx_lock); #ifndef CONFIG_S2IO_NAPI spin_lock_init(&sp->put_lock); #endif - /* - * SXE-002: Configure link and activity LED to init state - * on driver load. + /* + * SXE-002: Configure link and activity LED to init state + * on driver load. */ subid = sp->pdev->subsystem_device; if ((subid & 0xFF) >= 0x07) { @@ -4864,9 +4711,9 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) goto register_failed; } - /* - * Make Link state as off at this point, when the Link change - * interrupt comes the state will be automatically changed to + /* + * Make Link state as off at this point, when the Link change + * interrupt comes the state will be automatically changed to * the right state. */ netif_carrier_off(dev); @@ -4891,11 +4738,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) } /** - * s2io_rem_nic - Free the PCI device + * s2io_rem_nic - Free the PCI device * @pdev: structure containing the PCI related information of the device. - * Description: This function is called by the Pci subsystem to release a + * Description: This function is called by the Pci subsystem to release a * PCI device and free up all resource held up by the device. This could - * be in response to a Hot plug event or when the driver is to be removed + * be in response to a Hot plug event or when the driver is to be removed * from memory. */ @@ -4919,7 +4766,6 @@ static void __devexit s2io_rem_nic(struct pci_dev *pdev) pci_disable_device(pdev); pci_release_regions(pdev); pci_set_drvdata(pdev, NULL); - free_netdev(dev); } @@ -4935,11 +4781,11 @@ int __init s2io_starter(void) } /** - * s2io_closer - Cleanup routine for the driver + * s2io_closer - Cleanup routine for the driver * Description: This function is the cleanup routine for the driver. It unregist * ers the driver. */ -static void s2io_closer(void) +void s2io_closer(void) { pci_unregister_driver(&s2io_driver); DBG_PRINT(INIT_DBG, "cleanup done\n"); diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 1711c8c3dc99..4d2fc7a40434 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -31,6 +31,9 @@ #define SUCCESS 0 #define FAILURE -1 +/* Maximum time to flicker LED when asked to identify NIC using ethtool */ +#define MAX_FLICKER_TIME 60000 /* 60 Secs */ + /* Maximum outstanding splits to be configured into xena. */ typedef enum xena_max_outstanding_splits { XENA_ONE_SPLIT_TRANSACTION = 0, @@ -45,10 +48,10 @@ typedef enum xena_max_outstanding_splits { #define XENA_MAX_OUTSTANDING_SPLITS(n) (n << 4) /* OS concerned variables and constants */ -#define WATCH_DOG_TIMEOUT 5*HZ -#define EFILL 0x1234 -#define ALIGN_SIZE 127 -#define PCIX_COMMAND_REGISTER 0x62 +#define WATCH_DOG_TIMEOUT 15*HZ +#define EFILL 0x1234 +#define ALIGN_SIZE 127 +#define PCIX_COMMAND_REGISTER 0x62 /* * Debug related variables. @@ -61,7 +64,7 @@ typedef enum xena_max_outstanding_splits { #define INTR_DBG 4 /* Global variable that defines the present debug level of the driver. */ -static int debug_level = ERR_DBG; /* Default level. */ +int debug_level = ERR_DBG; /* Default level. */ /* DEBUG message print. */ #define DBG_PRINT(dbg_level, args...) if(!(debug_level> 48) @@ -382,7 +408,7 @@ typedef struct _RxD_t { #endif } RxD_t; -/* Structure that represents the Rx descriptor block which contains +/* Structure that represents the Rx descriptor block which contains * 128 Rx descriptors. */ #ifndef CONFIG_2BUFF_MODE @@ -392,11 +418,11 @@ typedef struct _RxD_block { u64 reserved_0; #define END_OF_BLOCK 0xFEFFFFFFFFFFFFFFULL - u64 reserved_1; /* 0xFEFFFFFFFFFFFFFF to mark last + u64 reserved_1; /* 0xFEFFFFFFFFFFFFFF to mark last * Rxd in this blk */ u64 reserved_2_pNext_RxD_block; /* Logical ptr to next */ u64 pNext_RxD_Blk_physical; /* Buff0_ptr.In a 32 bit arch - * the upper 32 bits should + * the upper 32 bits should * be 0 */ } RxD_block_t; #else @@ -405,13 +431,13 @@ typedef struct _RxD_block { RxD_t rxd[MAX_RXDS_PER_BLOCK]; #define END_OF_BLOCK 0xFEFFFFFFFFFFFFFFULL - u64 reserved_1; /* 0xFEFFFFFFFFFFFFFF to mark last Rxd + u64 reserved_1; /* 0xFEFFFFFFFFFFFFFF to mark last Rxd * in this blk */ u64 pNext_RxD_Blk_physical; /* Phy ponter to next blk. */ } RxD_block_t; #define SIZE_OF_BLOCK 4096 -/* Structure to hold virtual addresses of Buf0 and Buf1 in +/* Structure to hold virtual addresses of Buf0 and Buf1 in * 2buf mode. */ typedef struct bufAdd { void *ba_0_org; @@ -423,8 +449,8 @@ typedef struct bufAdd { /* Structure which stores all the MAC control parameters */ -/* This structure stores the offset of the RxD in the ring - * from which the Rx Interrupt processor can start picking +/* This structure stores the offset of the RxD in the ring + * from which the Rx Interrupt processor can start picking * up the RxDs for processing. */ typedef struct _rx_curr_get_info_t { @@ -436,7 +462,7 @@ typedef struct _rx_curr_get_info_t { typedef rx_curr_get_info_t rx_curr_put_info_t; /* This structure stores the offset of the TxDl in the FIFO - * from which the Tx Interrupt processor can start picking + * from which the Tx Interrupt processor can start picking * up the TxDLs for send complete interrupt processing. */ typedef struct { @@ -446,32 +472,96 @@ typedef struct { typedef tx_curr_get_info_t tx_curr_put_info_t; -/* Infomation related to the Tx and Rx FIFOs and Rings of Xena - * is maintained in this structure. - */ -typedef struct mac_info { -/* rx side stuff */ - /* Put pointer info which indictes which RxD has to be replenished +/* Structure that holds the Phy and virt addresses of the Blocks */ +typedef struct rx_block_info { + RxD_t *block_virt_addr; + dma_addr_t block_dma_addr; +} rx_block_info_t; + +/* pre declaration of the nic structure */ +typedef struct s2io_nic nic_t; + +/* Ring specific structure */ +typedef struct ring_info { + /* The ring number */ + int ring_no; + + /* + * Place holders for the virtual and physical addresses of + * all the Rx Blocks + */ + rx_block_info_t rx_blocks[MAX_RX_BLOCKS_PER_RING]; + int block_count; + int pkt_cnt; + + /* + * Put pointer info which indictes which RxD has to be replenished * with a new buffer. */ - rx_curr_put_info_t rx_curr_put_info[MAX_RX_RINGS]; + rx_curr_put_info_t rx_curr_put_info; - /* Get pointer info which indictes which is the last RxD that was + /* + * Get pointer info which indictes which is the last RxD that was * processed by the driver. */ - rx_curr_get_info_t rx_curr_get_info[MAX_RX_RINGS]; + rx_curr_get_info_t rx_curr_get_info; - u16 rmac_pause_time; - u16 mc_pause_threshold_q0q3; - u16 mc_pause_threshold_q4q7; +#ifndef CONFIG_S2IO_NAPI + /* Index to the absolute position of the put pointer of Rx ring */ + int put_pos; +#endif + +#ifdef CONFIG_2BUFF_MODE + /* Buffer Address store. */ + buffAdd_t **ba; +#endif + nic_t *nic; +} ring_info_t; +/* Fifo specific structure */ +typedef struct fifo_info { + /* FIFO number */ + int fifo_no; + + /* Maximum TxDs per TxDL */ + int max_txds; + + /* Place holder of all the TX List's Phy and Virt addresses. */ + list_info_hold_t *list_info; + + /* + * Current offset within the tx FIFO where driver would write + * new Tx frame + */ + tx_curr_put_info_t tx_curr_put_info; + + /* + * Current offset within tx FIFO from where the driver would start freeing + * the buffers + */ + tx_curr_get_info_t tx_curr_get_info; + + nic_t *nic; +}fifo_info_t; + +/* Infomation related to the Tx and Rx FIFOs and Rings of Xena + * is maintained in this structure. + */ +typedef struct mac_info { /* tx side stuff */ /* logical pointer of start of each Tx FIFO */ TxFIFO_element_t __iomem *tx_FIFO_start[MAX_TX_FIFOS]; -/* Current offset within tx_FIFO_start, where driver would write new Tx frame*/ - tx_curr_put_info_t tx_curr_put_info[MAX_TX_FIFOS]; - tx_curr_get_info_t tx_curr_get_info[MAX_TX_FIFOS]; + /* Fifo specific structure */ + fifo_info_t fifos[MAX_TX_FIFOS]; + +/* rx side stuff */ + /* Ring specific structure */ + ring_info_t rings[MAX_RX_RINGS]; + + u16 rmac_pause_time; + u16 mc_pause_threshold_q0q3; + u16 mc_pause_threshold_q4q7; void *stats_mem; /* orignal pointer to allocated mem */ dma_addr_t stats_mem_phy; /* Physical address of the stat block */ @@ -485,12 +575,6 @@ typedef struct { int usage_cnt; } usr_addr_t; -/* Structure that holds the Phy and virt addresses of the Blocks */ -typedef struct rx_block_info { - RxD_t *block_virt_addr; - dma_addr_t block_dma_addr; -} rx_block_info_t; - /* Default Tunable parameters of the NIC. */ #define DEFAULT_FIFO_LEN 4096 #define SMALL_RXD_CNT 30 * (MAX_RXDS_PER_BLOCK+1) @@ -499,7 +583,20 @@ typedef struct rx_block_info { #define LARGE_BLK_CNT 100 /* Structure representing one instance of the NIC */ -typedef struct s2io_nic { +struct s2io_nic { +#ifdef CONFIG_S2IO_NAPI + /* + * Count of packets to be processed in a given iteration, it will be indicated + * by the quota field of the device structure when NAPI is enabled. + */ + int pkts_to_process; +#endif + struct net_device *dev; + mac_info_t mac_control; + struct config_param config; + struct pci_dev *pdev; + void __iomem *bar0; + void __iomem *bar1; #define MAX_MAC_SUPPORTED 16 #define MAX_SUPPORTED_MULTICASTS MAX_MAC_SUPPORTED @@ -507,33 +604,17 @@ typedef struct s2io_nic { macaddr_t pre_mac_addr[MAX_MAC_SUPPORTED]; struct net_device_stats stats; - void __iomem *bar0; - void __iomem *bar1; - struct config_param config; - mac_info_t mac_control; int high_dma_flag; int device_close_flag; int device_enabled_once; - char name[32]; + char name[50]; struct tasklet_struct task; volatile unsigned long tasklet_status; - struct timer_list timer; - struct net_device *dev; - struct pci_dev *pdev; - u16 vendor_id; - u16 device_id; - u16 ccmd; - u32 cbar0_1; - u32 cbar0_2; - u32 cbar1_1; - u32 cbar1_2; - u32 cirq; - u8 cache_line; - u32 rom_expansion; - u16 pcix_cmd; - u32 irq; + /* Space to back up the PCI config space */ + u32 config_space[256 / sizeof(u32)]; + atomic_t rx_bufs_left[MAX_RX_RINGS]; spinlock_t tx_lock; @@ -558,27 +639,11 @@ typedef struct s2io_nic { u16 tx_err_count; u16 rx_err_count; -#ifndef CONFIG_S2IO_NAPI - /* Index to the absolute position of the put pointer of Rx ring. */ - int put_pos[MAX_RX_RINGS]; -#endif - - /* - * Place holders for the virtual and physical addresses of - * all the Rx Blocks - */ - rx_block_info_t rx_blocks[MAX_RX_RINGS][MAX_RX_BLOCKS_PER_RING]; - int block_count[MAX_RX_RINGS]; - int pkt_cnt[MAX_RX_RINGS]; - - /* Place holder of all the TX List's Phy and Virt addresses. */ - list_info_hold_t *list_info[MAX_TX_FIFOS]; - /* Id timer, used to blink NIC to physically identify NIC. */ struct timer_list id_timer; /* Restart timer, used to restart NIC if the device is stuck and - * a schedule task that will set the correct Link state once the + * a schedule task that will set the correct Link state once the * NIC's PHY has stabilized after a state change. */ #ifdef INIT_TQUEUE @@ -589,12 +654,12 @@ typedef struct s2io_nic { struct work_struct set_link_task; #endif - /* Flag that can be used to turn on or turn off the Rx checksum + /* Flag that can be used to turn on or turn off the Rx checksum * offload feature. */ int rx_csum; - /* after blink, the adapter must be restored with original + /* after blink, the adapter must be restored with original * values. */ u64 adapt_ctrl_org; @@ -604,16 +669,12 @@ typedef struct s2io_nic { #define LINK_DOWN 1 #define LINK_UP 2 -#ifdef CONFIG_2BUFF_MODE - /* Buffer Address store. */ - buffAdd_t **ba[MAX_RX_RINGS]; -#endif int task_flag; #define CARD_DOWN 1 #define CARD_UP 2 atomic_t card_state; volatile unsigned long link_state; -} nic_t; +}; #define RESET_ERROR 1; #define CMD_ERROR 2; @@ -622,9 +683,10 @@ typedef struct s2io_nic { #ifndef readq static inline u64 readq(void __iomem *addr) { - u64 ret = readl(addr + 4); - ret <<= 32; - ret |= readl(addr); + u64 ret = 0; + ret = readl(addr + 4); + (u64) ret <<= 32; + (u64) ret |= readl(addr); return ret; } @@ -637,10 +699,10 @@ static inline void writeq(u64 val, void __iomem *addr) writel((u32) (val >> 32), (addr + 4)); } -/* In 32 bit modes, some registers have to be written in a +/* In 32 bit modes, some registers have to be written in a * particular order to expect correct hardware operation. The - * macro SPECIAL_REG_WRITE is used to perform such ordered - * writes. Defines UF (Upper First) and LF (Lower First) will + * macro SPECIAL_REG_WRITE is used to perform such ordered + * writes. Defines UF (Upper First) and LF (Lower First) will * be used to specify the required write order. */ #define UF 1 @@ -716,6 +778,7 @@ static inline void SPECIAL_REG_WRITE(u64 val, void __iomem *addr, int order) #define PCC_FB_ECC_ERR vBIT(0xff, 16, 8) /* Interrupt to indicate PCC_FB_ECC Error. */ +#define RXD_GET_VLAN_TAG(Control_2) (u16)(Control_2 & MASK_VLAN_TAG) /* * Prototype declaration. */ @@ -725,36 +788,29 @@ static void __devexit s2io_rem_nic(struct pci_dev *pdev); static int init_shared_mem(struct s2io_nic *sp); static void free_shared_mem(struct s2io_nic *sp); static int init_nic(struct s2io_nic *nic); -#ifndef CONFIG_S2IO_NAPI -static void rx_intr_handler(struct s2io_nic *sp); -#endif -static void tx_intr_handler(struct s2io_nic *sp); +static void rx_intr_handler(ring_info_t *ring_data); +static void tx_intr_handler(fifo_info_t *fifo_data); static void alarm_intr_handler(struct s2io_nic *sp); static int s2io_starter(void); -static void s2io_closer(void); +void s2io_closer(void); static void s2io_tx_watchdog(struct net_device *dev); static void s2io_tasklet(unsigned long dev_addr); static void s2io_set_multicast(struct net_device *dev); -#ifndef CONFIG_2BUFF_MODE -static int rx_osm_handler(nic_t * sp, u16 len, RxD_t * rxdp, int ring_no); -#else -static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no, - buffAdd_t * ba); -#endif -static void s2io_link(nic_t * sp, int link); -static void s2io_reset(nic_t * sp); -#ifdef CONFIG_S2IO_NAPI +static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp); +void s2io_link(nic_t * sp, int link); +void s2io_reset(nic_t * sp); +#if defined(CONFIG_S2IO_NAPI) static int s2io_poll(struct net_device *dev, int *budget); #endif static void s2io_init_pci(nic_t * sp); -static int s2io_set_mac_addr(struct net_device *dev, u8 * addr); +int s2io_set_mac_addr(struct net_device *dev, u8 * addr); static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs); -static int verify_xena_quiescence(u64 val64, int flag); +static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag); static struct ethtool_ops netdev_ethtool_ops; static void s2io_set_link(unsigned long data); -static int s2io_set_swapper(nic_t * sp); -static void s2io_card_down(nic_t * nic); -static int s2io_card_up(nic_t * nic); - +int s2io_set_swapper(nic_t * sp); +static void s2io_card_down(nic_t *nic); +static int s2io_card_up(nic_t *nic); +int get_xena_rev_id(struct pci_dev *pdev); #endif /* _S2IO_H */ -- cgit v1.2.1 From 5e25b9ddb6683fe225a2266b53d73c57381a0c18 Mon Sep 17 00:00:00 2001 From: "raghavendra.koushik@neterion.com" Date: Wed, 3 Aug 2005 12:27:09 -0700 Subject: [PATCH] S2io: Hardware fixes Hi, Below patch addresses few h/w specific issues. 1. Check for additional ownership bit on Rx path before starting Rx processing. 2. Enable only 4 PCCs(Per Context Controller) for Xframe I revisions less than 4. 3. Program Rx and Tx round robin registers depending on no. of rings/FIFOs. 4. Tx continous interrupts is now a loadable parameter. 5. Reset the card if we get double-bit ECC errors. 6. A soft reset of XGXS being done to force a link state change has been eliminated. 7. After a reset, clear "parity error detected" bit, PCI-X ECC status register, and PCI_STATUS bit in tx_pic_int register. 8. The error in the disabling allmulticast implementation has been rectified. 9. Leave the PCI-X parameters MMRBC, OST etc. at their BIOS/system defaults. Signed-off-by: Ravinandan Arakali Signed-off-by: Raghavendra Koushik Signed-off-by: Jeff Garzik --- drivers/net/s2io-regs.h | 7 + drivers/net/s2io.c | 410 ++++++++++++++++++++++++++++++++++++++---------- drivers/net/s2io.h | 4 + 3 files changed, 341 insertions(+), 80 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h index 8746740e6efd..826deb0eb03a 100644 --- a/drivers/net/s2io-regs.h +++ b/drivers/net/s2io-regs.h @@ -62,6 +62,7 @@ typedef struct _XENA_dev_config { #define ADAPTER_STATUS_RMAC_REMOTE_FAULT BIT(6) #define ADAPTER_STATUS_RMAC_LOCAL_FAULT BIT(7) #define ADAPTER_STATUS_RMAC_PCC_IDLE vBIT(0xFF,8,8) +#define ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE vBIT(0x0F,8,8) #define ADAPTER_STATUS_RC_PRC_QUIESCENT vBIT(0xFF,16,8) #define ADAPTER_STATUS_MC_DRAM_READY BIT(24) #define ADAPTER_STATUS_MC_QUEUES_READY BIT(25) @@ -245,6 +246,7 @@ typedef struct _XENA_dev_config { #define STAT_TRSF_PER(n) TBD #define PER_SEC 0x208d5 #define SET_UPDT_PERIOD(n) vBIT((PER_SEC*n),32,32) +#define SET_UPDT_CLICKS(val) vBIT(val, 32, 32) u64 stat_addr; @@ -289,6 +291,7 @@ typedef struct _XENA_dev_config { u64 pcc_err_reg; #define PCC_FB_ECC_DB_ERR vBIT(0xFF, 16, 8) +#define PCC_ENABLE_FOUR vBIT(0x0F,0,8) u64 pcc_err_mask; u64 pcc_err_alarm; @@ -690,6 +693,10 @@ typedef struct _XENA_dev_config { #define MC_ERR_REG_MIRI_CRI_ERR_0 BIT(22) #define MC_ERR_REG_MIRI_CRI_ERR_1 BIT(23) #define MC_ERR_REG_SM_ERR BIT(31) +#define MC_ERR_REG_ECC_ALL_SNG (BIT(6) | \ + BIT(7) | BIT(17) | BIT(19)) +#define MC_ERR_REG_ECC_ALL_DBL (BIT(14) | \ + BIT(15) | BIT(18) | BIT(20)) u64 mc_err_mask; u64 mc_err_alarm; diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 0721e78dd8b0..e2144fc7df9a 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -68,6 +68,16 @@ static char s2io_driver_name[] = "Neterion"; static char s2io_driver_version[] = "Version 1.7.7"; +static inline int RXD_IS_UP2DT(RxD_t *rxdp) +{ + int ret; + + ret = ((!(rxdp->Control_1 & RXD_OWN_XENA)) && + (GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK)); + + return ret; +} + /* * Cards with following subsystem_id have a link state indication * problem, 600B, 600C, 600D, 640B, 640C and 640D. @@ -230,6 +240,7 @@ static unsigned int rx_ring_sz[MAX_RX_RINGS] = static unsigned int Stats_refresh_time = 4; static unsigned int rts_frm_len[MAX_RX_RINGS] = {[0 ...(MAX_RX_RINGS - 1)] = 0 }; +static unsigned int use_continuous_tx_intrs = 1; static unsigned int rmac_pause_time = 65535; static unsigned int mc_pause_threshold_q0q3 = 187; static unsigned int mc_pause_threshold_q4q7 = 187; @@ -638,7 +649,7 @@ static int init_nic(struct s2io_nic *nic) mac_control = &nic->mac_control; config = &nic->config; - /* to set the swapper control on the card */ + /* to set the swapper controle on the card */ if(s2io_set_swapper(nic)) { DBG_PRINT(ERR_DBG,"ERROR: Setting Swapper failed\n"); return -1; @@ -756,6 +767,13 @@ static int init_nic(struct s2io_nic *nic) val64 |= BIT(0); /* To enable the FIFO partition. */ writeq(val64, &bar0->tx_fifo_partition_0); + /* + * Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug + * SXE-008 TRANSMIT DMA ARBITRATION ISSUE. + */ + if (get_xena_rev_id(nic->pdev) < 4) + writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable); + val64 = readq(&bar0->tx_fifo_partition_0); DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n", &bar0->tx_fifo_partition_0, (unsigned long long) val64); @@ -823,37 +841,250 @@ static int init_nic(struct s2io_nic *nic) } writeq(val64, &bar0->rx_queue_cfg); - /* Initializing the Tx round robin registers to 0 - * filling tx and rx round robin registers as per - * the number of FIFOs and Rings is still TODO - */ - writeq(0, &bar0->tx_w_round_robin_0); - writeq(0, &bar0->tx_w_round_robin_1); - writeq(0, &bar0->tx_w_round_robin_2); - writeq(0, &bar0->tx_w_round_robin_3); - writeq(0, &bar0->tx_w_round_robin_4); - /* - * TODO - * Disable Rx steering. Hard coding all packets to be steered to - * Queue 0 for now. + * Filling Tx round robin registers + * as per the number of FIFOs */ - val64 = 0x8080808080808080ULL; - writeq(val64, &bar0->rts_qos_steering); + switch (config->tx_fifo_num) { + case 1: + val64 = 0x0000000000000000ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + writeq(val64, &bar0->tx_w_round_robin_1); + writeq(val64, &bar0->tx_w_round_robin_2); + writeq(val64, &bar0->tx_w_round_robin_3); + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 2: + val64 = 0x0000010000010000ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0100000100000100ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0001000001000001ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0000010000010000ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0100000000000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 3: + val64 = 0x0001000102000001ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0001020000010001ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0200000100010200ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0001000102000001ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0001020000000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 4: + val64 = 0x0001020300010200ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0100000102030001ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0200010000010203ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0001020001000001ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0203000100000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 5: + val64 = 0x0001000203000102ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0001020001030004ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0001000203000102ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0001020001030004ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0001000000000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 6: + val64 = 0x0001020304000102ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0304050001020001ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0203000100000102ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0304000102030405ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0001000200000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 7: + val64 = 0x0001020001020300ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0102030400010203ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0405060001020001ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0304050000010200ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0102030000000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 8: + val64 = 0x0001020300040105ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0200030106000204ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0103000502010007ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0304010002060500ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0103020400000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + } + + /* Filling the Rx round robin registers as per the + * number of Rings and steering based on QoS. + */ + switch (config->rx_ring_num) { + case 1: + val64 = 0x8080808080808080ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 2: + val64 = 0x0000010000010000ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0100000100000100ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0001000001000001ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0000010000010000ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0100000000000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8080808040404040ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 3: + val64 = 0x0001000102000001ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0001020000010001ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0200000100010200ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0001000102000001ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0001020000000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8080804040402020ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 4: + val64 = 0x0001020300010200ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0100000102030001ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0200010000010203ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0001020001000001ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0203000100000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8080404020201010ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 5: + val64 = 0x0001000203000102ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0001020001030004ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0001000203000102ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0001020001030004ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0001000000000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8080404020201008ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 6: + val64 = 0x0001020304000102ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0304050001020001ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0203000100000102ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0304000102030405ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0001000200000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8080404020100804ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 7: + val64 = 0x0001020001020300ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0102030400010203ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0405060001020001ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0304050000010200ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0102030000000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8080402010080402ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 8: + val64 = 0x0001020300040105ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0200030106000204ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0103000502010007ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0304010002060500ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0103020400000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8040201008040201ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + } /* UDP Fix */ val64 = 0; for (i = 0; i < 8; i++) writeq(val64, &bar0->rts_frm_len_n[i]); - /* Set the default rts frame length for ring0 */ - writeq(MAC_RTS_FRM_LEN_SET(dev->mtu+22), - &bar0->rts_frm_len_n[0]); + /* Set the default rts frame length for the rings configured */ + val64 = MAC_RTS_FRM_LEN_SET(dev->mtu+22); + for (i = 0 ; i < config->rx_ring_num ; i++) + writeq(val64, &bar0->rts_frm_len_n[i]); + + /* Set the frame length for the configured rings + * desired by the user + */ + for (i = 0; i < config->rx_ring_num; i++) { + /* If rts_frm_len[i] == 0 then it is assumed that user not + * specified frame length steering. + * If the user provides the frame length then program + * the rts_frm_len register for those values or else + * leave it as it is. + */ + if (rts_frm_len[i] != 0) { + writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len[i]), + &bar0->rts_frm_len_n[i]); + } + } /* Program statistics memory */ writeq(mac_control->stats_mem_phy, &bar0->stat_addr); val64 = SET_UPDT_PERIOD(Stats_refresh_time) | - STAT_CFG_STAT_RO | STAT_CFG_STAT_EN; + STAT_CFG_STAT_RO | STAT_CFG_STAT_EN; writeq(val64, &bar0->stat_cfg); /* @@ -877,13 +1108,14 @@ static int init_nic(struct s2io_nic *nic) val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078) | TTI_DATA1_MEM_TX_URNG_A(0xA) | TTI_DATA1_MEM_TX_URNG_B(0x10) | - TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN | - TTI_DATA1_MEM_TX_TIMER_CI_EN; + TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN; + if (use_continuous_tx_intrs) + val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN; writeq(val64, &bar0->tti_data1_mem); val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) | TTI_DATA2_MEM_TX_UFC_B(0x20) | - TTI_DATA2_MEM_TX_UFC_C(0x40) | TTI_DATA2_MEM_TX_UFC_D(0x80); + TTI_DATA2_MEM_TX_UFC_C(0x70) | TTI_DATA2_MEM_TX_UFC_D(0x80); writeq(val64, &bar0->tti_data2_mem); val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD; @@ -927,10 +1159,11 @@ static int init_nic(struct s2io_nic *nic) writeq(val64, &bar0->rti_command_mem); /* - * Once the operation completes, the Strobe bit of the command - * register will be reset. We poll for this particular condition - * We wait for a maximum of 500ms for the operation to complete, - * if it's not complete by then we return error. + * Once the operation completes, the Strobe bit of the + * command register will be reset. We poll for this + * particular condition. We wait for a maximum of 500ms + * for the operation to complete, if it's not complete + * by then we return error. */ time = 0; while (TRUE) { @@ -1185,10 +1418,10 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) temp64 &= ~((u64) val64); writeq(temp64, &bar0->general_int_mask); /* - * All MC block error interrupts are disabled for now. - * TODO + * Enable all MC Intrs. */ - writeq(DISABLE_ALL_INTRS, &bar0->mc_int_mask); + writeq(0x0, &bar0->mc_int_mask); + writeq(0x0, &bar0->mc_err_mask); } else if (flag == DISABLE_INTRS) { /* * Disable MC Intrs in the general intr mask register @@ -1247,23 +1480,41 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) } } -static int check_prc_pcc_state(u64 val64, int flag) +static int check_prc_pcc_state(u64 val64, int flag, int rev_id) { int ret = 0; if (flag == FALSE) { - if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) && - ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == - ADAPTER_STATUS_RC_PRC_QUIESCENT)) { - ret = 1; + if (rev_id >= 4) { + if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) && + ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == + ADAPTER_STATUS_RC_PRC_QUIESCENT)) { + ret = 1; + } + } else { + if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) && + ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == + ADAPTER_STATUS_RC_PRC_QUIESCENT)) { + ret = 1; + } } } else { - if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) == - ADAPTER_STATUS_RMAC_PCC_IDLE) && - (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) || - ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == - ADAPTER_STATUS_RC_PRC_QUIESCENT))) { - ret = 1; + if (rev_id >= 4) { + if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) == + ADAPTER_STATUS_RMAC_PCC_IDLE) && + (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) || + ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == + ADAPTER_STATUS_RC_PRC_QUIESCENT))) { + ret = 1; + } + } else { + if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) == + ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) && + (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) || + ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == + ADAPTER_STATUS_RC_PRC_QUIESCENT))) { + ret = 1; + } } } @@ -1286,6 +1537,7 @@ static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag) { int ret = 0; u64 tmp64 = ~((u64) val64); + int rev_id = get_xena_rev_id(sp->pdev); if (! (tmp64 & @@ -1294,7 +1546,7 @@ static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag) ADAPTER_STATUS_PIC_QUIESCENT | ADAPTER_STATUS_MC_DRAM_READY | ADAPTER_STATUS_MC_QUEUES_READY | ADAPTER_STATUS_M_PLL_LOCK | ADAPTER_STATUS_P_PLL_LOCK))) { - ret = check_prc_pcc_state(val64, flag); + ret = check_prc_pcc_state(val64, flag, rev_id); } return ret; @@ -1407,7 +1659,7 @@ static int start_nic(struct s2io_nic *nic) /* Enable select interrupts */ interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | TX_MAC_INTR | - RX_MAC_INTR; + RX_MAC_INTR | MC_INTR; en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS); /* @@ -1439,21 +1691,6 @@ static int start_nic(struct s2io_nic *nic) */ schedule_work(&nic->set_link_task); - /* - * Here we are performing soft reset on XGXS to - * force link down. Since link is already up, we will get - * link state change interrupt after this reset - */ - SPECIAL_REG_WRITE(0x80010515001E0000ULL, &bar0->dtx_control, UF); - val64 = readq(&bar0->dtx_control); - udelay(50); - SPECIAL_REG_WRITE(0x80010515001E00E0ULL, &bar0->dtx_control, UF); - val64 = readq(&bar0->dtx_control); - udelay(50); - SPECIAL_REG_WRITE(0x80070515001F00E4ULL, &bar0->dtx_control, UF); - val64 = readq(&bar0->dtx_control); - udelay(50); - return SUCCESS; } @@ -1524,7 +1761,7 @@ static void stop_nic(struct s2io_nic *nic) /* Disable all interrupts */ interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | TX_MAC_INTR | - RX_MAC_INTR; + RX_MAC_INTR | MC_INTR; en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS); /* Disable PRCs */ @@ -1737,6 +1974,7 @@ int fill_rx_buffers(struct s2io_nic *nic, int ring_no) off++; mac_control->rings[ring_no].rx_curr_put_info.offset = off; #endif + rxdp->Control_2 |= SET_RXD_MARKER; atomic_inc(&nic->rx_bufs_left[ring_no]); alloc_tab++; @@ -1965,11 +2203,8 @@ static void rx_intr_handler(ring_info_t *ring_data) put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) + put_info.offset; #endif - while ((!(rxdp->Control_1 & RXD_OWN_XENA)) && -#ifdef CONFIG_2BUFF_MODE - (!rxdp->Control_2 & BIT(0)) && -#endif - (((get_offset + 1) % ring_bufs) != put_offset)) { + while (RXD_IS_UP2DT(rxdp) && + (((get_offset + 1) % ring_bufs) != put_offset)) { skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control); if (skb == NULL) { DBG_PRINT(ERR_DBG, "%s: The skb is ", @@ -2153,6 +2388,21 @@ static void alarm_intr_handler(struct s2io_nic *nic) schedule_work(&nic->set_link_task); } + /* Handling Ecc errors */ + val64 = readq(&bar0->mc_err_reg); + writeq(val64, &bar0->mc_err_reg); + if (val64 & (MC_ERR_REG_ECC_ALL_SNG | MC_ERR_REG_ECC_ALL_DBL)) { + if (val64 & MC_ERR_REG_ECC_ALL_DBL) { + DBG_PRINT(ERR_DBG, "%s: Device indicates ", + dev->name); + DBG_PRINT(ERR_DBG, "double ECC error!!\n"); + netif_stop_queue(dev); + schedule_work(&nic->rst_timer_task); + } else { + /* Device can recover from Single ECC errors */ + } + } + /* In case of a serious error, the device will be Reset. */ val64 = readq(&bar0->serr_source); if (val64 & SERR_SOURCE_ANY) { @@ -2226,7 +2476,7 @@ void s2io_reset(nic_t * sp) { XENA_dev_config_t __iomem *bar0 = sp->bar0; u64 val64; - u16 subid; + u16 subid, pci_cmd; val64 = SW_RESET_ALL; writeq(val64, &bar0->sw_reset); @@ -2255,6 +2505,18 @@ void s2io_reset(nic_t * sp) /* Set swapper to enable I/O register access */ s2io_set_swapper(sp); + /* Clear certain PCI/PCI-X fields after reset */ + pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd); + pci_cmd &= 0x7FFF; /* Clear parity err detect bit */ + pci_write_config_word(sp->pdev, PCI_COMMAND, pci_cmd); + + val64 = readq(&bar0->txpic_int_reg); + val64 &= ~BIT(62); /* Clearing PCI_STATUS error reflected here */ + writeq(val64, &bar0->txpic_int_reg); + + /* Clearing PCIX Ecc status register */ + pci_write_config_dword(sp->pdev, 0x68, 0); + /* Reset device statistics maintained by OS */ memset(&sp->stats, 0, sizeof (struct net_device_stats)); @@ -2797,6 +3059,8 @@ static void s2io_set_multicast(struct net_device *dev) /* Disable all Multicast addresses */ writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr), &bar0->rmac_addr_data0_mem); + writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0), + &bar0->rmac_addr_data1_mem); val64 = RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos); @@ -4369,21 +4633,6 @@ static void s2io_init_pci(nic_t * sp) (pci_cmd | PCI_COMMAND_PARITY)); pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd); - /* Set MMRB count to 1024 in PCI-X Command register. */ - pcix_cmd &= 0xFFF3; - pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - (pcix_cmd | (0x1 << 2))); /* MMRBC 1K */ - pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - &(pcix_cmd)); - - /* Setting Maximum outstanding splits based on system type. */ - pcix_cmd &= 0xFF8F; - pcix_cmd |= XENA_MAX_OUTSTANDING_SPLITS(0x1); /* 2 splits. */ - pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - pcix_cmd); - pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - &(pcix_cmd)); - /* Forcibly disabling relaxed ordering capability of the card. */ pcix_cmd &= 0xfffd; pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, @@ -4400,6 +4649,7 @@ module_param_array(tx_fifo_len, uint, NULL, 0); module_param_array(rx_ring_sz, uint, NULL, 0); module_param(Stats_refresh_time, int, 0); module_param_array(rts_frm_len, uint, NULL, 0); +module_param(use_continuous_tx_intrs, int, 1); module_param(rmac_pause_time, int, 0); module_param(mc_pause_threshold_q0q3, int, 0); module_param(mc_pause_threshold_q4q7, int, 0); diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 4d2fc7a40434..92db59a0fb11 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -372,6 +372,10 @@ typedef struct _RxD_t { #define RXD_GET_L4_CKSUM(val) ((u16)(val) & 0xFFFF) u64 Control_2; +#define THE_RXD_MARK 0x3 +#define SET_RXD_MARKER vBIT(THE_RXD_MARK, 0, 2) +#define GET_RXD_MARKER(ctrl) ((ctrl & SET_RXD_MARKER) >> 62) + #ifndef CONFIG_2BUFF_MODE #define MASK_BUFFER0_SIZE vBIT(0x3FFF,2,14) #define SET_BUFFER0_SIZE(val) vBIT(val,2,14) -- cgit v1.2.1 From 7ba013ac029513eb4b70cfcd4b86e37c5f16c483 Mon Sep 17 00:00:00 2001 From: "raghavendra.koushik@neterion.com" Date: Wed, 3 Aug 2005 12:29:20 -0700 Subject: [PATCH] S2io: Software fixes Hi, Below patch includes fixes for few purely software bugs identified since last release. 1. Keep track and display(as part of ethtool command output) the no. of single-bit and double-bit ECC errors. 2. Handle race condition between intr handler and "interface down" routine. 3. Initial link state setting modified so that the link state displayed after "interface Up" is correct. 4. Fix for "Incorrect Tx packet count when TSO is enabled". 5. Disable periodic DMA of statistics and schedule one-shot DMA only when required. Signed-off-by: Ravinandan Arakali Signed-off-by: Raghavendra Koushik Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 95 +++++++++++++++++++++++++++++++++++++++++++++++------- drivers/net/s2io.h | 5 +++ 2 files changed, 88 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index e2144fc7df9a..e24c5e544734 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -158,6 +158,9 @@ static char ethtool_stats_keys[][ETH_GSTRING_LEN] = { {"rmac_pause_cnt"}, {"rmac_accepted_ip"}, {"rmac_err_tcp"}, + {"\n DRIVER STATISTICS"}, + {"single_bit_ecc_errs"}, + {"double_bit_ecc_errs"}, }; #define S2IO_STAT_LEN sizeof(ethtool_stats_keys)/ ETH_GSTRING_LEN @@ -237,7 +240,6 @@ static unsigned int tx_fifo_len[MAX_TX_FIFOS] = static unsigned int rx_ring_num = 1; static unsigned int rx_ring_sz[MAX_RX_RINGS] = {[0 ...(MAX_RX_RINGS - 1)] = 0 }; -static unsigned int Stats_refresh_time = 4; static unsigned int rts_frm_len[MAX_RX_RINGS] = {[0 ...(MAX_RX_RINGS - 1)] = 0 }; static unsigned int use_continuous_tx_intrs = 1; @@ -1083,9 +1085,6 @@ static int init_nic(struct s2io_nic *nic) /* Program statistics memory */ writeq(mac_control->stats_mem_phy, &bar0->stat_addr); - val64 = SET_UPDT_PERIOD(Stats_refresh_time) | - STAT_CFG_STAT_RO | STAT_CFG_STAT_EN; - writeq(val64, &bar0->stat_cfg); /* * Initializing the sampling rate for the device to calculate the @@ -2101,6 +2100,7 @@ static int s2io_poll(struct net_device *dev, int *budget) u64 val64; int i; + atomic_inc(&nic->isr_cnt); mac_control = &nic->mac_control; config = &nic->config; @@ -2136,6 +2136,7 @@ static int s2io_poll(struct net_device *dev, int *budget) } /* Re enable the Rx interrupts. */ en_dis_able_nic_intrs(nic, RX_TRAFFIC_INTR, ENABLE_INTRS); + atomic_dec(&nic->isr_cnt); return 0; no_rx: @@ -2149,6 +2150,7 @@ no_rx: break; } } + atomic_dec(&nic->isr_cnt); return 1; } #endif @@ -2179,6 +2181,13 @@ static void rx_intr_handler(ring_info_t *ring_data) #endif register u64 val64; + spin_lock(&nic->rx_lock); + if (atomic_read(&nic->card_state) == CARD_DOWN) { + DBG_PRINT(ERR_DBG, "%s: %s going down for reset\n", + __FUNCTION__, dev->name); + spin_unlock(&nic->rx_lock); + } + /* * rx_traffic_int reg is an R1 register, hence we read and write * back the same value in the register to clear it @@ -2210,6 +2219,7 @@ static void rx_intr_handler(ring_info_t *ring_data) DBG_PRINT(ERR_DBG, "%s: The skb is ", dev->name); DBG_PRINT(ERR_DBG, "Null in Rx Intr\n"); + spin_unlock(&nic->rx_lock); return; } #ifndef CONFIG_2BUFF_MODE @@ -2262,6 +2272,7 @@ static void rx_intr_handler(ring_info_t *ring_data) break; #endif } + spin_unlock(&nic->rx_lock); } /** @@ -2345,7 +2356,6 @@ static void tx_intr_handler(fifo_info_t *fifo_data) (sizeof(TxD_t) * fifo_data->max_txds)); /* Updating the statistics block */ - nic->stats.tx_packets++; nic->stats.tx_bytes += skb->len; dev_kfree_skb_irq(skb); @@ -2393,13 +2403,16 @@ static void alarm_intr_handler(struct s2io_nic *nic) writeq(val64, &bar0->mc_err_reg); if (val64 & (MC_ERR_REG_ECC_ALL_SNG | MC_ERR_REG_ECC_ALL_DBL)) { if (val64 & MC_ERR_REG_ECC_ALL_DBL) { + nic->mac_control.stats_info->sw_stat. + double_ecc_errs++; DBG_PRINT(ERR_DBG, "%s: Device indicates ", dev->name); DBG_PRINT(ERR_DBG, "double ECC error!!\n"); netif_stop_queue(dev); schedule_work(&nic->rst_timer_task); } else { - /* Device can recover from Single ECC errors */ + nic->mac_control.stats_info->sw_stat. + single_ecc_errs++; } } @@ -2695,7 +2708,7 @@ int s2io_open(struct net_device *dev) * Nic is initialized */ netif_carrier_off(dev); - sp->last_link_state = LINK_DOWN; + sp->last_link_state = 0; /* Unkown link state */ /* Initialize H/W and enable interrupts */ if (s2io_card_up(sp)) { @@ -2909,6 +2922,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) mac_info_t *mac_control; struct config_param *config; + atomic_inc(&sp->isr_cnt); mac_control = &sp->mac_control; config = &sp->config; @@ -2924,6 +2938,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) if (!reason) { /* The interrupt was not raised by Xena. */ + atomic_dec(&sp->isr_cnt); return IRQ_NONE; } @@ -2972,6 +2987,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) dev->name); DBG_PRINT(ERR_DBG, " in ISR!!\n"); clear_bit(0, (&sp->tasklet_status)); + atomic_dec(&sp->isr_cnt); return IRQ_HANDLED; } clear_bit(0, (&sp->tasklet_status)); @@ -2981,9 +2997,36 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) } #endif + atomic_dec(&sp->isr_cnt); return IRQ_HANDLED; } +/** + * s2io_updt_stats - + */ +static void s2io_updt_stats(nic_t *sp) +{ + XENA_dev_config_t __iomem *bar0 = sp->bar0; + u64 val64; + int cnt = 0; + + if (atomic_read(&sp->card_state) == CARD_UP) { + /* Apprx 30us on a 133 MHz bus */ + val64 = SET_UPDT_CLICKS(10) | + STAT_CFG_ONE_SHOT_EN | STAT_CFG_STAT_EN; + writeq(val64, &bar0->stat_cfg); + do { + udelay(100); + val64 = readq(&bar0->stat_cfg); + if (!(val64 & BIT(0))) + break; + cnt++; + if (cnt == 5) + break; /* Updt failed */ + } while(1); + } +} + /** * s2io_get_stats - Updates the device statistics structure. * @dev : pointer to the device structure. @@ -3004,6 +3047,11 @@ struct net_device_stats *s2io_get_stats(struct net_device *dev) mac_control = &sp->mac_control; config = &sp->config; + /* Configure Stats for immediate updt */ + s2io_updt_stats(sp); + + sp->stats.tx_packets = + le32_to_cpu(mac_control->stats_info->tmac_frms); sp->stats.tx_errors = le32_to_cpu(mac_control->stats_info->tmac_any_err_frms); sp->stats.rx_errors = @@ -4018,6 +4066,7 @@ static void s2io_get_ethtool_stats(struct net_device *dev, nic_t *sp = dev->priv; StatInfo_t *stat_info = sp->mac_control.stats_info; + s2io_updt_stats(sp); tmp_stats[i++] = le32_to_cpu(stat_info->tmac_frms); tmp_stats[i++] = le32_to_cpu(stat_info->tmac_data_octets); tmp_stats[i++] = le64_to_cpu(stat_info->tmac_drop_frms); @@ -4057,6 +4106,9 @@ static void s2io_get_ethtool_stats(struct net_device *dev, tmp_stats[i++] = le32_to_cpu(stat_info->rmac_pause_cnt); tmp_stats[i++] = le32_to_cpu(stat_info->rmac_accepted_ip); tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_tcp); + tmp_stats[i++] = 0; + tmp_stats[i++] = stat_info->sw_stat.single_ecc_errs; + tmp_stats[i++] = stat_info->sw_stat.double_ecc_errs; } int s2io_ethtool_get_regs_len(struct net_device *dev) @@ -4353,14 +4405,27 @@ static void s2io_card_down(nic_t * sp) break; } } while (1); - spin_lock_irqsave(&sp->tx_lock, flags); s2io_reset(sp); - /* Free all unused Tx and Rx buffers */ + /* Waiting till all Interrupt handlers are complete */ + cnt = 0; + do { + msleep(10); + if (!atomic_read(&sp->isr_cnt)) + break; + cnt++; + } while(cnt < 5); + + spin_lock_irqsave(&sp->tx_lock, flags); + /* Free all Tx buffers */ free_tx_buffers(sp); + spin_unlock_irqrestore(&sp->tx_lock, flags); + + /* Free all Rx buffers */ + spin_lock_irqsave(&sp->rx_lock, flags); free_rx_buffers(sp); + spin_unlock_irqrestore(&sp->rx_lock, flags); - spin_unlock_irqrestore(&sp->tx_lock, flags); clear_bit(0, &(sp->link_state)); } @@ -4647,7 +4712,6 @@ module_param(tx_fifo_num, int, 0); module_param(rx_ring_num, int, 0); module_param_array(tx_fifo_len, uint, NULL, 0); module_param_array(rx_ring_sz, uint, NULL, 0); -module_param(Stats_refresh_time, int, 0); module_param_array(rts_frm_len, uint, NULL, 0); module_param(use_continuous_tx_intrs, int, 1); module_param(rmac_pause_time, int, 0); @@ -4804,6 +4868,9 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) for (i = 0; i < config->rx_ring_num; i++) atomic_set(&sp->rx_bufs_left[i], 0); + /* Initialize the number of ISRs currently running */ + atomic_set(&sp->isr_cnt, 0); + /* initialize the shared memory used by the NIC and the host */ if (init_shared_mem(sp)) { DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", @@ -4938,6 +5005,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) #ifndef CONFIG_S2IO_NAPI spin_lock_init(&sp->put_lock); #endif + spin_lock_init(&sp->rx_lock); /* * SXE-002: Configure link and activity LED to init state @@ -4961,13 +5029,16 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) goto register_failed; } + /* Initialize device name */ + strcpy(sp->name, dev->name); + strcat(sp->name, ": Neterion Xframe I 10GbE adapter"); + /* * Make Link state as off at this point, when the Link change * interrupt comes the state will be automatically changed to * the right state. */ netif_carrier_off(dev); - sp->last_link_state = LINK_DOWN; return 0; diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 92db59a0fb11..69dd0e51dda0 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -195,6 +195,9 @@ typedef struct stat_block { u32 rxd_rd_cnt; u32 rxf_wr_cnt; u32 txf_rd_cnt; + +/* Software statistics maintained by driver */ + swStat_t sw_stat; } StatInfo_t; /* @@ -678,6 +681,8 @@ struct s2io_nic { #define CARD_UP 2 atomic_t card_state; volatile unsigned long link_state; + spinlock_t rx_lock; + atomic_t isr_cnt; }; #define RESET_ERROR 1; -- cgit v1.2.1 From 1ddc50d40a19b3524d302d1d6bfd52ac7bc6b6f7 Mon Sep 17 00:00:00 2001 From: "raghavendra.koushik@neterion.com" Date: Wed, 3 Aug 2005 12:30:43 -0700 Subject: [PATCH] S2io: Removed memory leaks Hi, This patch fixes certain memory leaks discovered in free_tx_buffers() and rx_osm_handler() Signed-off-by: Ravinandan Arakali Signed-off-by: Raghavendra Koushik Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 33 ++++++++++++++++++++++++++++++--- 1 file changed, 30 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index e24c5e544734..6668b99025c8 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -1709,7 +1709,7 @@ static void free_tx_buffers(struct s2io_nic *nic) int i, j; mac_info_t *mac_control; struct config_param *config; - int cnt = 0; + int cnt = 0, frg_cnt; mac_control = &nic->mac_control; config = &nic->config; @@ -1722,11 +1722,33 @@ static void free_tx_buffers(struct s2io_nic *nic) (struct sk_buff *) ((unsigned long) txdp-> Host_Control); if (skb == NULL) { - memset(txdp, 0, sizeof(TxD_t)); + memset(txdp, 0, sizeof(TxD_t) * + config->max_txds); continue; } + frg_cnt = skb_shinfo(skb)->nr_frags; + pci_unmap_single(nic->pdev, (dma_addr_t) + txdp->Buffer_Pointer, + skb->len - skb->data_len, + PCI_DMA_TODEVICE); + if (frg_cnt) { + TxD_t *temp; + temp = txdp; + txdp++; + for (j = 0; j < frg_cnt; j++, txdp++) { + skb_frag_t *frag = + &skb_shinfo(skb)->frags[j]; + pci_unmap_page(nic->pdev, + (dma_addr_t) + txdp-> + Buffer_Pointer, + frag->size, + PCI_DMA_TODEVICE); + } + txdp = temp; + } dev_kfree_skb(skb); - memset(txdp, 0, sizeof(TxD_t)); + memset(txdp, 0, sizeof(TxD_t) * config->max_txds); cnt++; } DBG_PRINT(INTR_DBG, @@ -4570,6 +4592,11 @@ static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp) unsigned long long err = rxdp->Control_1 & RXD_T_CODE; DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%llx\n", dev->name, err); + dev_kfree_skb(skb); + sp->stats.rx_crc_errors++; + atomic_dec(&sp->rx_bufs_left[ring_no]); + rxdp->Host_Control = 0; + return 0; } /* Updating statistics */ -- cgit v1.2.1 From fe113638328995b69d8797e6466b29661b1602d1 Mon Sep 17 00:00:00 2001 From: "raghavendra.koushik@neterion.com" Date: Wed, 3 Aug 2005 12:32:00 -0700 Subject: [PATCH] S2io: Performance improvements Hi, This patch relates to mostly performance related changes. 1. Fixed incorrect computation of PANIC level in rx_buffer_level(). 2. Removed unnecessary PIOs(read/write of tx_traffic_int and rx_traffic_int) from interrupt handler and removed read of general_int_status register from xmit routine. 3. Enable two-buffer mode(for Rx path) automatically for SGI systems. This improves Rx performance dramatically on SGI systems. Signed-off-by: Ravinandan Arakali Signed-off-by: Raghavendra Koushik Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 46 +++++++++++++++++++--------------------------- drivers/net/s2io.h | 5 +++++ 2 files changed, 24 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 6668b99025c8..28d6d3746c80 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -100,8 +100,7 @@ static inline int rx_buffer_level(nic_t * sp, int rxb_size, int ring) mac_control = &sp->mac_control; if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16) { level = LOW; - if ((mac_control->rings[ring].pkt_cnt - rxb_size) < - MAX_RXDS_PER_BLOCK) { + if (rxb_size <= MAX_RXDS_PER_BLOCK) { level = PANIC; } } @@ -2193,7 +2192,6 @@ static void rx_intr_handler(ring_info_t *ring_data) { nic_t *nic = ring_data->nic; struct net_device *dev = (struct net_device *) nic->dev; - XENA_dev_config_t __iomem *bar0 = nic->bar0; int get_block, get_offset, put_block, put_offset, ring_bufs; rx_curr_get_info_t get_info, put_info; RxD_t *rxdp; @@ -2201,8 +2199,6 @@ static void rx_intr_handler(ring_info_t *ring_data) #ifndef CONFIG_S2IO_NAPI int pkt_cnt = 0; #endif - register u64 val64; - spin_lock(&nic->rx_lock); if (atomic_read(&nic->card_state) == CARD_DOWN) { DBG_PRINT(ERR_DBG, "%s: %s going down for reset\n", @@ -2210,13 +2206,6 @@ static void rx_intr_handler(ring_info_t *ring_data) spin_unlock(&nic->rx_lock); } - /* - * rx_traffic_int reg is an R1 register, hence we read and write - * back the same value in the register to clear it - */ - val64 = readq(&bar0->tx_traffic_int); - writeq(val64, &bar0->tx_traffic_int); - get_info = ring_data->rx_curr_get_info; get_block = get_info.block_index; put_info = ring_data->rx_curr_put_info; @@ -2312,20 +2301,11 @@ static void rx_intr_handler(ring_info_t *ring_data) static void tx_intr_handler(fifo_info_t *fifo_data) { nic_t *nic = fifo_data->nic; - XENA_dev_config_t __iomem *bar0 = nic->bar0; struct net_device *dev = (struct net_device *) nic->dev; tx_curr_get_info_t get_info, put_info; struct sk_buff *skb; TxD_t *txdlp; u16 j, frg_cnt; - register u64 val64 = 0; - - /* - * tx_traffic_int reg is an R1 register, hence we read and write - * back the same value in the register to clear it - */ - val64 = readq(&bar0->tx_traffic_int); - writeq(val64, &bar0->tx_traffic_int); get_info = fifo_data->tx_curr_get_info; put_info = fifo_data->tx_curr_put_info; @@ -2818,7 +2798,6 @@ int s2io_xmit(struct sk_buff *skb, struct net_device *dev) #endif mac_info_t *mac_control; struct config_param *config; - XENA_dev_config_t __iomem *bar0 = sp->bar0; mac_control = &sp->mac_control; config = &sp->config; @@ -2870,7 +2849,6 @@ int s2io_xmit(struct sk_buff *skb, struct net_device *dev) } txdp->Control_2 |= config->tx_intr_type; - txdp->Control_1 |= (TXD_BUFFER0_SIZE(frg_len) | TXD_GATHER_CODE_FIRST); txdp->Control_1 |= TXD_LIST_OWN_XENA; @@ -2890,6 +2868,8 @@ int s2io_xmit(struct sk_buff *skb, struct net_device *dev) val64 = mac_control->fifos[queue].list_info[put_off].list_phy_addr; writeq(val64, &tx_fifo->TxDL_Pointer); + wmb(); + val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST | TX_FIFO_LAST_LIST); @@ -2899,9 +2879,6 @@ int s2io_xmit(struct sk_buff *skb, struct net_device *dev) #endif writeq(val64, &tx_fifo->List_Control); - /* Perform a PCI read to flush previous writes */ - val64 = readq(&bar0->general_int_status); - put_off++; put_off %= mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1; mac_control->fifos[queue].tx_curr_put_info.offset = put_off; @@ -2940,7 +2917,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) nic_t *sp = dev->priv; XENA_dev_config_t __iomem *bar0 = sp->bar0; int i; - u64 reason = 0; + u64 reason = 0, val64; mac_info_t *mac_control; struct config_param *config; @@ -2978,6 +2955,13 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) #else /* If Intr is because of Rx Traffic */ if (reason & GEN_INTR_RXTRAFFIC) { + /* + * rx_traffic_int reg is an R1 register, writing all 1's + * will ensure that the actual interrupt causing bit get's + * cleared and hence a read can be avoided. + */ + val64 = 0xFFFFFFFFFFFFFFFFULL; + writeq(val64, &bar0->rx_traffic_int); for (i = 0; i < config->rx_ring_num; i++) { rx_intr_handler(&mac_control->rings[i]); } @@ -2986,6 +2970,14 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) /* If Intr is because of Tx Traffic */ if (reason & GEN_INTR_TXTRAFFIC) { + /* + * tx_traffic_int reg is an R1 register, writing all 1's + * will ensure that the actual interrupt causing bit get's + * cleared and hence a read can be avoided. + */ + val64 = 0xFFFFFFFFFFFFFFFFULL; + writeq(val64, &bar0->tx_traffic_int); + for (i = 0; i < config->tx_fifo_num; i++) tx_intr_handler(&mac_control->fifos[i]); } diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 69dd0e51dda0..ce9bf6d5ee00 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -13,6 +13,11 @@ #ifndef _S2IO_H #define _S2IO_H +/* Enable 2 buffer mode by default for SGI system */ +#ifdef CONFIG_IA64_SGI_SN2 +#define CONFIG_2BUFF_MODE +#endif + #define TBD 0 #define BIT(loc) (0x8000000000000000ULL >> (loc)) #define vBIT(val, loc, sz) (((u64)val) << (64-loc-sz)) -- cgit v1.2.1 From d8892c6ee39614bc6d282dbef0ff9fa461a6467c Mon Sep 17 00:00:00 2001 From: "raghavendra.koushik@neterion.com" Date: Wed, 3 Aug 2005 12:33:12 -0700 Subject: [PATCH] S2io: Support for runtime MTU change Hi, Patch below supports MTU change on-the-fly(without bringing interface down) Signed-off-by: Ravinandan Arakali Signed-off-by: Raghavendra Koushik Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 28d6d3746c80..aff1fb74e14b 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -2849,6 +2849,7 @@ int s2io_xmit(struct sk_buff *skb, struct net_device *dev) } txdp->Control_2 |= config->tx_intr_type; + txdp->Control_1 |= (TXD_BUFFER0_SIZE(frg_len) | TXD_GATHER_CODE_FIRST); txdp->Control_1 |= TXD_LIST_OWN_XENA; @@ -4246,14 +4247,6 @@ int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) int s2io_change_mtu(struct net_device *dev, int new_mtu) { nic_t *sp = dev->priv; - XENA_dev_config_t __iomem *bar0 = sp->bar0; - register u64 val64; - - if (netif_running(dev)) { - DBG_PRINT(ERR_DBG, "%s: Must be stopped to ", dev->name); - DBG_PRINT(ERR_DBG, "change its MTU\n"); - return -EBUSY; - } if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) { DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n", @@ -4261,11 +4254,22 @@ int s2io_change_mtu(struct net_device *dev, int new_mtu) return -EPERM; } - /* Set the new MTU into the PYLD register of the NIC */ - val64 = new_mtu; - writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len); - dev->mtu = new_mtu; + if (netif_running(dev)) { + s2io_card_down(sp); + netif_stop_queue(dev); + if (s2io_card_up(sp)) { + DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", + __FUNCTION__); + } + if (netif_queue_stopped(dev)) + netif_wake_queue(dev); + } else { /* Device is down */ + XENA_dev_config_t __iomem *bar0 = sp->bar0; + u64 val64 = new_mtu; + + writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len); + } return 0; } -- cgit v1.2.1 From 25fff88eb7dbc63e03f1766e130515900d440dbb Mon Sep 17 00:00:00 2001 From: "raghavendra.koushik@neterion.com" Date: Wed, 3 Aug 2005 12:34:11 -0700 Subject: [PATCH] S2io: Timer based slowpath handling Hi, This patch implements the slow-path handling functions(link state change, hardware errors) as a timer. It is not handled in interrupt handler as was done previously. Signed-off-by: Ravinandan Arakali Signed-off-by: Raghavendra Koushik Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 22 +++++++++++++++++++--- drivers/net/s2io.h | 4 ++++ 2 files changed, 23 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index aff1fb74e14b..ee498d248d38 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -168,6 +168,12 @@ static char ethtool_stats_keys[][ETH_GSTRING_LEN] = { #define S2IO_TEST_LEN sizeof(s2io_gstrings) / ETH_GSTRING_LEN #define S2IO_STRINGS_LEN S2IO_TEST_LEN * ETH_GSTRING_LEN +#define S2IO_TIMER_CONF(timer, handle, arg, exp) \ + init_timer(&timer); \ + timer.function = handle; \ + timer.data = (unsigned long) arg; \ + mod_timer(&timer, (jiffies + exp)) \ + /* * Constants to be programmed into the Xena's registers, to configure * the XAUI. @@ -2741,6 +2747,7 @@ int s2io_open(struct net_device *dev) setting_mac_address_failed: free_irq(sp->pdev->irq, dev); isr_registration_failed: + del_timer_sync(&sp->alarm_timer); s2io_reset(sp); hw_init_failed: return err; @@ -2898,6 +2905,15 @@ int s2io_xmit(struct sk_buff *skb, struct net_device *dev) return 0; } +static void +s2io_alarm_handle(unsigned long data) +{ + nic_t *sp = (nic_t *)data; + + alarm_intr_handler(sp); + mod_timer(&sp->alarm_timer, jiffies + HZ / 2); +} + /** * s2io_isr - ISR handler of the device . * @irq: the irq of the device. @@ -2942,9 +2958,6 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) return IRQ_NONE; } - if (reason & (GEN_ERROR_INTR)) - alarm_intr_handler(sp); - #ifdef CONFIG_S2IO_NAPI if (reason & GEN_INTR_RXTRAFFIC) { if (netif_rx_schedule_prep(dev)) { @@ -4394,6 +4407,7 @@ static void s2io_card_down(nic_t * sp) unsigned long flags; register u64 val64 = 0; + del_timer_sync(&sp->alarm_timer); /* If s2io_set_link task is executing, wait till it completes. */ while (test_and_set_bit(0, &(sp->link_state))) { msleep(50); @@ -4496,6 +4510,8 @@ static int s2io_card_up(nic_t * sp) return -ENODEV; } + S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2)); + atomic_set(&sp->card_state, CARD_UP); return 0; } diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index ce9bf6d5ee00..263fe7a1b903 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -624,6 +624,9 @@ struct s2io_nic { struct tasklet_struct task; volatile unsigned long tasklet_status; + /* Timer that handles I/O errors/exceptions */ + struct timer_list alarm_timer; + /* Space to back up the PCI config space */ u32 config_space[256 / sizeof(u32)]; @@ -819,6 +822,7 @@ static int s2io_poll(struct net_device *dev, int *budget); #endif static void s2io_init_pci(nic_t * sp); int s2io_set_mac_addr(struct net_device *dev, u8 * addr); +static void s2io_alarm_handle(unsigned long data); static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs); static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag); static struct ethtool_ops netdev_ethtool_ops; -- cgit v1.2.1 From be3a6b02eb68a4d47397b771b6e4aa1f7f0f7ffb Mon Sep 17 00:00:00 2001 From: "raghavendra.koushik@neterion.com" Date: Wed, 3 Aug 2005 12:35:55 -0700 Subject: [PATCH] S2io: VLAN support Hi, Patch below adds VLAN support to the driver. Signed-off-by: Ravinandan Arakali Signed-off-by: Raghavendra Koushik Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++++-- drivers/net/s2io.h | 2 ++ 2 files changed, 59 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index ee498d248d38..db3e394c740b 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -55,6 +55,7 @@ #include #include #include +#include #include #include @@ -174,6 +175,30 @@ static char ethtool_stats_keys[][ETH_GSTRING_LEN] = { timer.data = (unsigned long) arg; \ mod_timer(&timer, (jiffies + exp)) \ +/* Add the vlan */ +static void s2io_vlan_rx_register(struct net_device *dev, + struct vlan_group *grp) +{ + nic_t *nic = dev->priv; + unsigned long flags; + + spin_lock_irqsave(&nic->tx_lock, flags); + nic->vlgrp = grp; + spin_unlock_irqrestore(&nic->tx_lock, flags); +} + +/* Unregister the vlan */ +static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid) +{ + nic_t *nic = dev->priv; + unsigned long flags; + + spin_lock_irqsave(&nic->tx_lock, flags); + if (nic->vlgrp) + nic->vlgrp->vlan_devices[vid] = NULL; + spin_unlock_irqrestore(&nic->tx_lock, flags); +} + /* * Constants to be programmed into the Xena's registers, to configure * the XAUI. @@ -2803,6 +2828,8 @@ int s2io_xmit(struct sk_buff *skb, struct net_device *dev) #ifdef NETIF_F_TSO int mss; #endif + u16 vlan_tag = 0; + int vlan_priority = 0; mac_info_t *mac_control; struct config_param *config; @@ -2821,6 +2848,13 @@ int s2io_xmit(struct sk_buff *skb, struct net_device *dev) queue = 0; + /* Get Fifo number to Transmit based on vlan priority */ + if (sp->vlgrp && vlan_tx_tag_present(skb)) { + vlan_tag = vlan_tx_tag_get(skb); + vlan_priority = vlan_tag >> 13; + queue = config->fifo_mapping[vlan_priority]; + } + put_off = (u16) mac_control->fifos[queue].tx_curr_put_info.offset; get_off = (u16) mac_control->fifos[queue].tx_curr_get_info.offset; txdp = (TxD_t *) mac_control->fifos[queue].list_info[put_off]. @@ -2857,6 +2891,11 @@ int s2io_xmit(struct sk_buff *skb, struct net_device *dev) txdp->Control_2 |= config->tx_intr_type; + if (sp->vlgrp && vlan_tx_tag_present(skb)) { + txdp->Control_2 |= TXD_VLAN_ENABLE; + txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag); + } + txdp->Control_1 |= (TXD_BUFFER0_SIZE(frg_len) | TXD_GATHER_CODE_FIRST); txdp->Control_1 |= TXD_LIST_OWN_XENA; @@ -4653,10 +4692,23 @@ static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp) skb->protocol = eth_type_trans(skb, dev); #ifdef CONFIG_S2IO_NAPI - netif_receive_skb(skb); + if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) { + /* Queueing the vlan frame to the upper layer */ + vlan_hwaccel_receive_skb(skb, sp->vlgrp, + RXD_GET_VLAN_TAG(rxdp->Control_2)); + } else { + netif_receive_skb(skb); + } #else - netif_rx(skb); + if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) { + /* Queueing the vlan frame to the upper layer */ + vlan_hwaccel_rx(skb, sp->vlgrp, + RXD_GET_VLAN_TAG(rxdp->Control_2)); + } else { + netif_rx(skb); + } #endif + dev->last_rx = jiffies; atomic_dec(&sp->rx_bufs_left[ring_no]); return SUCCESS; @@ -4954,6 +5006,9 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) dev->do_ioctl = &s2io_ioctl; dev->change_mtu = &s2io_change_mtu; SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); + dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + dev->vlan_rx_register = s2io_vlan_rx_register; + dev->vlan_rx_kill_vid = (void *)s2io_vlan_rx_kill_vid; /* * will use eth_mac_addr() for dev->set_mac_address diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 263fe7a1b903..b924ef21814a 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -689,6 +689,8 @@ struct s2io_nic { #define CARD_UP 2 atomic_t card_state; volatile unsigned long link_state; + struct vlan_group *vlgrp; + spinlock_t rx_lock; atomic_t isr_cnt; }; -- cgit v1.2.1 From 541ae68f6ddf1c27aa6879935ce541f110484202 Mon Sep 17 00:00:00 2001 From: "raghavendra.koushik@neterion.com" Date: Wed, 3 Aug 2005 12:36:55 -0700 Subject: [PATCH] S2io: Support for Xframe II NIC Hi, This patch provides basic support for the Xframe II adapter. Includes the following changes: 1. New values to program XAUI interface. 2. Print the PCI/PCI-X mode(bus frequency, width). 3. Remove EOI from reset during intialization. 4. Enable all 8 PCCs if Xframe II adapter. 5. Programs the RLDRAM size depending on the device. (Note: RLDRAM size on XFARME-I is 64Mb whereas on XFRAME-II it's 32 Mb). 6. Enable extended(64-bit) statistics counters. 7. Program timer interrupt duration based on PCI/PCI-X clock speed. 8. Not required to save/restore PCI config space before/after reset. Signed-off-by: Ravinandan Arakali Signed-off-by: Raghavendra Koushik Signed-off-by: Jeff Garzik --- drivers/net/s2io-regs.h | 53 ++++-- drivers/net/s2io.c | 462 ++++++++++++++++++++++++++++++++++++++---------- drivers/net/s2io.h | 64 +++++++ 3 files changed, 471 insertions(+), 108 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h index 826deb0eb03a..159d87648f64 100644 --- a/drivers/net/s2io-regs.h +++ b/drivers/net/s2io-regs.h @@ -91,7 +91,21 @@ typedef struct _XENA_dev_config { SERR_SOURCE_MC | \ SERR_SOURCE_XGXS) - u8 unused_0[0x800 - 0x120]; + u64 pci_mode; +#define GET_PCI_MODE(val) ((val & vBIT(0xF, 0, 4)) >> 60) +#define PCI_MODE_PCI_33 0 +#define PCI_MODE_PCI_66 0x1 +#define PCI_MODE_PCIX_M1_66 0x2 +#define PCI_MODE_PCIX_M1_100 0x3 +#define PCI_MODE_PCIX_M1_133 0x4 +#define PCI_MODE_PCIX_M2_66 0x5 +#define PCI_MODE_PCIX_M2_100 0x6 +#define PCI_MODE_PCIX_M2_133 0x7 +#define PCI_MODE_UNSUPPORTED BIT(0) +#define PCI_MODE_32_BITS BIT(8) +#define PCI_MODE_UNKNOWN_MODE BIT(9) + + u8 unused_0[0x800 - 0x128]; /* PCI-X Controller registers */ u64 pic_int_status; @@ -223,19 +237,16 @@ typedef struct _XENA_dev_config { u64 xmsi_data; u64 rx_mat; +#define RX_MAT_SET(ring, msi) vBIT(msi, (8 * ring), 8) u8 unused6[0x8]; - u64 tx_mat0_7; - u64 tx_mat8_15; - u64 tx_mat16_23; - u64 tx_mat24_31; - u64 tx_mat32_39; - u64 tx_mat40_47; - u64 tx_mat48_55; - u64 tx_mat56_63; + u64 tx_mat0_n[0x8]; +#define TX_MAT_SET(fifo, msi) vBIT(msi, (8 * fifo), 8) - u8 unused_1[0x10]; + u8 unused_1[0x8]; + u64 stat_byte_cnt; +#define STAT_BC(n) vBIT(n,4,12) /* Automated statistics collection */ u64 stat_cfg; @@ -269,7 +280,12 @@ typedef struct _XENA_dev_config { u64 gpio_control; #define GPIO_CTRL_GPIO_0 BIT(8) - u8 unused7[0x600]; + u8 unused7_1[0x240 - 0x200]; + + u64 wreq_split_mask; +#define WREQ_SPLIT_MASK_SET_MASK(val) vBIT(val, 52, 12) + + u8 unused7_2[0x800 - 0x248]; /* TxDMA registers */ u64 txdma_int_status; @@ -470,6 +486,7 @@ typedef struct _XENA_dev_config { #define PRC_CTRL_NO_SNOOP (BIT(22)|BIT(23)) #define PRC_CTRL_NO_SNOOP_DESC BIT(22) #define PRC_CTRL_NO_SNOOP_BUFF BIT(23) +#define PRC_CTRL_BIMODAL_INTERRUPT BIT(37) #define PRC_CTRL_RXD_BACKOFF_INTERVAL(val) vBIT(val,40,24) u64 prc_alarm_action; @@ -742,7 +759,19 @@ typedef struct _XENA_dev_config { u64 mc_rldram_test_d1; u8 unused24[0x300 - 0x288]; u64 mc_rldram_test_d2; - u8 unused25[0x700 - 0x308]; + + u8 unused24_1[0x360 - 0x308]; + u64 mc_rldram_ctrl; +#define MC_RLDRAM_ENABLE_ODT BIT(7) + + u8 unused24_2[0x640 - 0x368]; + u64 mc_rldram_ref_per_herc; +#define MC_RLDRAM_SET_REF_PERIOD(val) vBIT(val, 0, 16) + + u8 unused24_3[0x660 - 0x648]; + u64 mc_rldram_mrs_herc; + + u8 unused25[0x700 - 0x668]; u64 mc_debug_ctrl; u8 unused26[0x3000 - 0x2f08]; diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index db3e394c740b..15e2ee9f9703 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -84,9 +84,10 @@ static inline int RXD_IS_UP2DT(RxD_t *rxdp) * problem, 600B, 600C, 600D, 640B, 640C and 640D. * macro below identifies these cards given the subsystem_id. */ -#define CARDS_WITH_FAULTY_LINK_INDICATORS(subid) \ - (((subid >= 0x600B) && (subid <= 0x600D)) || \ - ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0 +#define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \ + (dev_type == XFRAME_I_DEVICE) ? \ + ((((subid >= 0x600B) && (subid <= 0x600D)) || \ + ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0 #define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \ ADAPTER_STATUS_RMAC_LOCAL_FAULT))) @@ -207,7 +208,24 @@ static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid) #define SWITCH_SIGN 0xA5A5A5A5A5A5A5A5ULL #define END_SIGN 0x0 -static u64 default_mdio_cfg[] = { +static u64 herc_act_dtx_cfg[] = { + /* Set address */ + 0x80000515BA750000ULL, 0x80000515BA7500E0ULL, + /* Write data */ + 0x80000515BA750004ULL, 0x80000515BA7500E4ULL, + /* Set address */ + 0x80010515003F0000ULL, 0x80010515003F00E0ULL, + /* Write data */ + 0x80010515003F0004ULL, 0x80010515003F00E4ULL, + /* Set address */ + 0x80020515F2100000ULL, 0x80020515F21000E0ULL, + /* Write data */ + 0x80020515F2100004ULL, 0x80020515F21000E4ULL, + /* Done */ + END_SIGN +}; + +static u64 xena_mdio_cfg[] = { /* Reset PMA PLL */ 0xC001010000000000ULL, 0xC0010100000000E0ULL, 0xC0010100008000E4ULL, @@ -217,7 +235,7 @@ static u64 default_mdio_cfg[] = { END_SIGN }; -static u64 default_dtx_cfg[] = { +static u64 xena_dtx_cfg[] = { 0x8000051500000000ULL, 0x80000515000000E0ULL, 0x80000515D93500E4ULL, 0x8001051500000000ULL, 0x80010515000000E0ULL, 0x80010515001E00E4ULL, @@ -655,6 +673,87 @@ static void free_shared_mem(struct s2io_nic *nic) } } +/** + * s2io_verify_pci_mode - + */ + +static int s2io_verify_pci_mode(nic_t *nic) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + register u64 val64 = 0; + int mode; + + val64 = readq(&bar0->pci_mode); + mode = (u8)GET_PCI_MODE(val64); + + if ( val64 & PCI_MODE_UNKNOWN_MODE) + return -1; /* Unknown PCI mode */ + return mode; +} + + +/** + * s2io_print_pci_mode - + */ +static int s2io_print_pci_mode(nic_t *nic) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + register u64 val64 = 0; + int mode; + struct config_param *config = &nic->config; + + val64 = readq(&bar0->pci_mode); + mode = (u8)GET_PCI_MODE(val64); + + if ( val64 & PCI_MODE_UNKNOWN_MODE) + return -1; /* Unknown PCI mode */ + + if (val64 & PCI_MODE_32_BITS) { + DBG_PRINT(ERR_DBG, "%s: Device is on 32 bit ", nic->dev->name); + } else { + DBG_PRINT(ERR_DBG, "%s: Device is on 64 bit ", nic->dev->name); + } + + switch(mode) { + case PCI_MODE_PCI_33: + DBG_PRINT(ERR_DBG, "33MHz PCI bus\n"); + config->bus_speed = 33; + break; + case PCI_MODE_PCI_66: + DBG_PRINT(ERR_DBG, "66MHz PCI bus\n"); + config->bus_speed = 133; + break; + case PCI_MODE_PCIX_M1_66: + DBG_PRINT(ERR_DBG, "66MHz PCIX(M1) bus\n"); + config->bus_speed = 133; /* Herc doubles the clock rate */ + break; + case PCI_MODE_PCIX_M1_100: + DBG_PRINT(ERR_DBG, "100MHz PCIX(M1) bus\n"); + config->bus_speed = 200; + break; + case PCI_MODE_PCIX_M1_133: + DBG_PRINT(ERR_DBG, "133MHz PCIX(M1) bus\n"); + config->bus_speed = 266; + break; + case PCI_MODE_PCIX_M2_66: + DBG_PRINT(ERR_DBG, "133MHz PCIX(M2) bus\n"); + config->bus_speed = 133; + break; + case PCI_MODE_PCIX_M2_100: + DBG_PRINT(ERR_DBG, "200MHz PCIX(M2) bus\n"); + config->bus_speed = 200; + break; + case PCI_MODE_PCIX_M2_133: + DBG_PRINT(ERR_DBG, "266MHz PCIX(M2) bus\n"); + config->bus_speed = 266; + break; + default: + return -1; /* Unsupported bus speed */ + } + + return mode; +} + /** * init_nic - Initialization of hardware * @nic: device peivate variable @@ -687,6 +786,16 @@ static int init_nic(struct s2io_nic *nic) return -1; } + /* + * Herc requires EOI to be removed from reset before XGXS, so.. + */ + if (nic->device_type & XFRAME_II_DEVICE) { + val64 = 0xA500000000ULL; + writeq(val64, &bar0->sw_reset); + msleep(500); + val64 = readq(&bar0->sw_reset); + } + /* Remove XGXS from reset state */ val64 = 0; writeq(val64, &bar0->sw_reset); @@ -718,41 +827,51 @@ static int init_nic(struct s2io_nic *nic) * of 64 bit values into two registers in a particular * sequence. Hence a macro 'SWITCH_SIGN' has been defined * which will be defined in the array of configuration values - * (default_dtx_cfg & default_mdio_cfg) at appropriate places + * (xena_dtx_cfg & xena_mdio_cfg) at appropriate places * to switch writing from one regsiter to another. We continue * writing these values until we encounter the 'END_SIGN' macro. * For example, After making a series of 21 writes into * dtx_control register the 'SWITCH_SIGN' appears and hence we * start writing into mdio_control until we encounter END_SIGN. */ - while (1) { - dtx_cfg: - while (default_dtx_cfg[dtx_cnt] != END_SIGN) { - if (default_dtx_cfg[dtx_cnt] == SWITCH_SIGN) { - dtx_cnt++; - goto mdio_cfg; - } - SPECIAL_REG_WRITE(default_dtx_cfg[dtx_cnt], + if (nic->device_type & XFRAME_II_DEVICE) { + while (herc_act_dtx_cfg[dtx_cnt] != END_SIGN) { + SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt], &bar0->dtx_control, UF); - val64 = readq(&bar0->dtx_control); + if (dtx_cnt & 0x1) + msleep(1); /* Necessary!! */ dtx_cnt++; } - mdio_cfg: - while (default_mdio_cfg[mdio_cnt] != END_SIGN) { - if (default_mdio_cfg[mdio_cnt] == SWITCH_SIGN) { + } else { + while (1) { + dtx_cfg: + while (xena_dtx_cfg[dtx_cnt] != END_SIGN) { + if (xena_dtx_cfg[dtx_cnt] == SWITCH_SIGN) { + dtx_cnt++; + goto mdio_cfg; + } + SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt], + &bar0->dtx_control, UF); + val64 = readq(&bar0->dtx_control); + dtx_cnt++; + } + mdio_cfg: + while (xena_mdio_cfg[mdio_cnt] != END_SIGN) { + if (xena_mdio_cfg[mdio_cnt] == SWITCH_SIGN) { + mdio_cnt++; + goto dtx_cfg; + } + SPECIAL_REG_WRITE(xena_mdio_cfg[mdio_cnt], + &bar0->mdio_control, UF); + val64 = readq(&bar0->mdio_control); mdio_cnt++; + } + if ((xena_dtx_cfg[dtx_cnt] == END_SIGN) && + (xena_mdio_cfg[mdio_cnt] == END_SIGN)) { + break; + } else { goto dtx_cfg; } - SPECIAL_REG_WRITE(default_mdio_cfg[mdio_cnt], - &bar0->mdio_control, UF); - val64 = readq(&bar0->mdio_control); - mdio_cnt++; - } - if ((default_dtx_cfg[dtx_cnt] == END_SIGN) && - (default_mdio_cfg[mdio_cnt] == END_SIGN)) { - break; - } else { - goto dtx_cfg; } } @@ -803,7 +922,8 @@ static int init_nic(struct s2io_nic *nic) * Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug * SXE-008 TRANSMIT DMA ARBITRATION ISSUE. */ - if (get_xena_rev_id(nic->pdev) < 4) + if ((nic->device_type == XFRAME_I_DEVICE) && + (get_xena_rev_id(nic->pdev) < 4)) writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable); val64 = readq(&bar0->tx_fifo_partition_0); @@ -833,7 +953,11 @@ static int init_nic(struct s2io_nic *nic) * configured Rings. */ val64 = 0; - mem_size = 64; + if (nic->device_type & XFRAME_II_DEVICE) + mem_size = 32; + else + mem_size = 64; + for (i = 0; i < config->rx_ring_num; i++) { switch (i) { case 0: @@ -1116,6 +1240,11 @@ static int init_nic(struct s2io_nic *nic) /* Program statistics memory */ writeq(mac_control->stats_mem_phy, &bar0->stat_addr); + if (nic->device_type == XFRAME_II_DEVICE) { + val64 = STAT_BC(0x320); + writeq(val64, &bar0->stat_byte_cnt); + } + /* * Initializing the sampling rate for the device to calculate the * bandwidth utilization. @@ -1134,12 +1263,18 @@ static int init_nic(struct s2io_nic *nic) * 250 interrupts per sec. Continuous interrupts are enabled * by default. */ - val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078) | - TTI_DATA1_MEM_TX_URNG_A(0xA) | + if (nic->device_type == XFRAME_II_DEVICE) { + int count = (nic->config.bus_speed * 125)/2; + val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count); + } else { + + val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078); + } + val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) | TTI_DATA1_MEM_TX_URNG_B(0x10) | TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN; - if (use_continuous_tx_intrs) - val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN; + if (use_continuous_tx_intrs) + val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN; writeq(val64, &bar0->tti_data1_mem); val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) | @@ -1171,9 +1306,19 @@ static int init_nic(struct s2io_nic *nic) time++; } + /* RTI Initialization */ - val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF) | - RTI_DATA1_MEM_RX_URNG_A(0xA) | + if (nic->device_type == XFRAME_II_DEVICE) { + /* + * Programmed to generate Apprx 500 Intrs per + * second + */ + int count = (nic->config.bus_speed * 125)/4; + val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count); + } else { + val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF); + } + val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) | RTI_DATA1_MEM_RX_URNG_B(0x10) | RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN; @@ -1267,6 +1412,15 @@ static int init_nic(struct s2io_nic *nic) val64 |= PIC_CNTL_SHARED_SPLITS(shared_splits); writeq(val64, &bar0->pic_control); + /* + * Programming the Herc to split every write transaction + * that does not start on an ADB to reduce disconnects. + */ + if (nic->device_type == XFRAME_II_DEVICE) { + val64 = WREQ_SPLIT_MASK_SET_MASK(255); + writeq(val64, &bar0->wreq_split_mask); + } + return SUCCESS; } @@ -1509,18 +1663,18 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) } } -static int check_prc_pcc_state(u64 val64, int flag, int rev_id) +static int check_prc_pcc_state(u64 val64, int flag, int rev_id, int herc) { int ret = 0; if (flag == FALSE) { - if (rev_id >= 4) { + if ((!herc && (rev_id >= 4)) || herc) { if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) && ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == ADAPTER_STATUS_RC_PRC_QUIESCENT)) { ret = 1; } - } else { + }else { if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) && ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == ADAPTER_STATUS_RC_PRC_QUIESCENT)) { @@ -1528,7 +1682,7 @@ static int check_prc_pcc_state(u64 val64, int flag, int rev_id) } } } else { - if (rev_id >= 4) { + if ((!herc && (rev_id >= 4)) || herc) { if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) == ADAPTER_STATUS_RMAC_PCC_IDLE) && (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) || @@ -1564,10 +1718,11 @@ static int check_prc_pcc_state(u64 val64, int flag, int rev_id) static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag) { - int ret = 0; + int ret = 0, herc; u64 tmp64 = ~((u64) val64); int rev_id = get_xena_rev_id(sp->pdev); + herc = (sp->device_type == XFRAME_II_DEVICE); if (! (tmp64 & (ADAPTER_STATUS_TDMA_READY | ADAPTER_STATUS_RDMA_READY | @@ -1575,7 +1730,7 @@ static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag) ADAPTER_STATUS_PIC_QUIESCENT | ADAPTER_STATUS_MC_DRAM_READY | ADAPTER_STATUS_MC_QUEUES_READY | ADAPTER_STATUS_M_PLL_LOCK | ADAPTER_STATUS_P_PLL_LOCK))) { - ret = check_prc_pcc_state(val64, flag, rev_id); + ret = check_prc_pcc_state(val64, flag, rev_id, herc); } return ret; @@ -1706,7 +1861,8 @@ static int start_nic(struct s2io_nic *nic) /* SXE-002: Initialize link and activity LED */ subid = nic->pdev->subsystem_device; - if ((subid & 0xFF) >= 0x07) { + if (((subid & 0xFF) >= 0x07) && + (nic->device_type == XFRAME_I_DEVICE)) { val64 = readq(&bar0->gpio_control); val64 |= 0x0000800000000000ULL; writeq(val64, &bar0->gpio_control); @@ -2541,9 +2697,12 @@ void s2io_reset(nic_t * sp) */ msleep(250); + if (!(sp->device_type & XFRAME_II_DEVICE)) { /* Restore the PCI state saved during initializarion. */ - pci_restore_state(sp->pdev); - + pci_restore_state(sp->pdev); + } else { + pci_set_master(sp->pdev); + } s2io_init_pci(sp); msleep(250); @@ -2568,7 +2727,8 @@ void s2io_reset(nic_t * sp) /* SXE-002: Configure link and activity LED to turn it off */ subid = sp->pdev->subsystem_device; - if ((subid & 0xFF) >= 0x07) { + if (((subid & 0xFF) >= 0x07) && + (sp->device_type == XFRAME_I_DEVICE)) { val64 = readq(&bar0->gpio_control); val64 |= 0x0000800000000000ULL; writeq(val64, &bar0->gpio_control); @@ -2576,6 +2736,15 @@ void s2io_reset(nic_t * sp) writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700)); } + /* + * Clear spurious ECC interrupts that would have occured on + * XFRAME II cards after reset. + */ + if (sp->device_type == XFRAME_II_DEVICE) { + val64 = readq(&bar0->pcc_err_reg); + writeq(val64, &bar0->pcc_err_reg); + } + sp->device_enabled_once = FALSE; } @@ -3463,7 +3632,8 @@ static void s2io_phy_id(unsigned long data) u16 subid; subid = sp->pdev->subsystem_device; - if ((subid & 0xFF) >= 0x07) { + if ((sp->device_type == XFRAME_II_DEVICE) || + ((subid & 0xFF) >= 0x07)) { val64 = readq(&bar0->gpio_control); val64 ^= GPIO_CTRL_GPIO_0; writeq(val64, &bar0->gpio_control); @@ -3500,7 +3670,8 @@ static int s2io_ethtool_idnic(struct net_device *dev, u32 data) subid = sp->pdev->subsystem_device; last_gpio_ctrl_val = readq(&bar0->gpio_control); - if ((subid & 0xFF) < 0x07) { + if ((sp->device_type == XFRAME_I_DEVICE) && + ((subid & 0xFF) < 0x07)) { val64 = readq(&bar0->adapter_control); if (!(val64 & ADAPTER_CNTL_EN)) { printk(KERN_ERR @@ -3520,7 +3691,7 @@ static int s2io_ethtool_idnic(struct net_device *dev, u32 data) msleep_interruptible(MAX_FLICKER_TIME); del_timer_sync(&sp->id_timer); - if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) { + if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid)) { writeq(last_gpio_ctrl_val, &bar0->gpio_control); last_gpio_ctrl_val = readq(&bar0->gpio_control); } @@ -4134,44 +4305,91 @@ static void s2io_get_ethtool_stats(struct net_device *dev, StatInfo_t *stat_info = sp->mac_control.stats_info; s2io_updt_stats(sp); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_data_octets); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->tmac_frms_oflow) << 32 | + le32_to_cpu(stat_info->tmac_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->tmac_data_octets_oflow) << 32 | + le32_to_cpu(stat_info->tmac_data_octets); tmp_stats[i++] = le64_to_cpu(stat_info->tmac_drop_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_mcst_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_bcst_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->tmac_mcst_frms_oflow) << 32 | + le32_to_cpu(stat_info->tmac_mcst_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->tmac_bcst_frms_oflow) << 32 | + le32_to_cpu(stat_info->tmac_bcst_frms); tmp_stats[i++] = le64_to_cpu(stat_info->tmac_pause_ctrl_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_any_err_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->tmac_any_err_frms_oflow) << 32 | + le32_to_cpu(stat_info->tmac_any_err_frms); tmp_stats[i++] = le64_to_cpu(stat_info->tmac_vld_ip_octets); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_vld_ip); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_drop_ip); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_icmp); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_rst_tcp); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->tmac_vld_ip_oflow) << 32 | + le32_to_cpu(stat_info->tmac_vld_ip); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->tmac_drop_ip_oflow) << 32 | + le32_to_cpu(stat_info->tmac_drop_ip); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->tmac_icmp_oflow) << 32 | + le32_to_cpu(stat_info->tmac_icmp); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->tmac_rst_tcp_oflow) << 32 | + le32_to_cpu(stat_info->tmac_rst_tcp); tmp_stats[i++] = le64_to_cpu(stat_info->tmac_tcp); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_udp); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_vld_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_data_octets); + tmp_stats[i++] = (u64)le32_to_cpu(stat_info->tmac_udp_oflow) << 32 | + le32_to_cpu(stat_info->tmac_udp); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_vld_frms_oflow) << 32 | + le32_to_cpu(stat_info->rmac_vld_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_data_octets_oflow) << 32 | + le32_to_cpu(stat_info->rmac_data_octets); tmp_stats[i++] = le64_to_cpu(stat_info->rmac_fcs_err_frms); tmp_stats[i++] = le64_to_cpu(stat_info->rmac_drop_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_vld_mcst_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_vld_bcst_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_vld_mcst_frms_oflow) << 32 | + le32_to_cpu(stat_info->rmac_vld_mcst_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_vld_bcst_frms_oflow) << 32 | + le32_to_cpu(stat_info->rmac_vld_bcst_frms); tmp_stats[i++] = le32_to_cpu(stat_info->rmac_in_rng_len_err_frms); tmp_stats[i++] = le64_to_cpu(stat_info->rmac_long_frms); tmp_stats[i++] = le64_to_cpu(stat_info->rmac_pause_ctrl_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_discarded_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_usized_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_osized_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_frag_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_jabber_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_ip); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_discarded_frms_oflow) << 32 | + le32_to_cpu(stat_info->rmac_discarded_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_usized_frms_oflow) << 32 | + le32_to_cpu(stat_info->rmac_usized_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_osized_frms_oflow) << 32 | + le32_to_cpu(stat_info->rmac_osized_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_frag_frms_oflow) << 32 | + le32_to_cpu(stat_info->rmac_frag_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_jabber_frms_oflow) << 32 | + le32_to_cpu(stat_info->rmac_jabber_frms); + tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_ip_oflow) << 32 | + le32_to_cpu(stat_info->rmac_ip); tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ip_octets); tmp_stats[i++] = le32_to_cpu(stat_info->rmac_hdr_err_ip); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_drop_ip); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_icmp); + tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_drop_ip_oflow) << 32 | + le32_to_cpu(stat_info->rmac_drop_ip); + tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_icmp_oflow) << 32 | + le32_to_cpu(stat_info->rmac_icmp); tmp_stats[i++] = le64_to_cpu(stat_info->rmac_tcp); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_udp); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_drp_udp); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_pause_cnt); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_accepted_ip); + tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_udp_oflow) << 32 | + le32_to_cpu(stat_info->rmac_udp); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_err_drp_udp_oflow) << 32 | + le32_to_cpu(stat_info->rmac_err_drp_udp); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_pause_cnt_oflow) << 32 | + le32_to_cpu(stat_info->rmac_pause_cnt); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_accepted_ip_oflow) << 32 | + le32_to_cpu(stat_info->rmac_accepted_ip); tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_tcp); tmp_stats[i++] = 0; tmp_stats[i++] = stat_info->sw_stat.single_ecc_errs; @@ -4401,7 +4619,8 @@ static void s2io_set_link(unsigned long data) val64 = readq(&bar0->adapter_control); val64 |= ADAPTER_CNTL_EN; writeq(val64, &bar0->adapter_control); - if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) { + if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type, + subid)) { val64 = readq(&bar0->gpio_control); val64 |= GPIO_CTRL_GPIO_0; writeq(val64, &bar0->gpio_control); @@ -4423,7 +4642,8 @@ static void s2io_set_link(unsigned long data) } s2io_link(nic, LINK_UP); } else { - if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) { + if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type, + subid)) { val64 = readq(&bar0->gpio_control); val64 &= ~GPIO_CTRL_GPIO_0; writeq(val64, &bar0->gpio_control); @@ -4708,7 +4928,6 @@ static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp) netif_rx(skb); } #endif - dev->last_rx = jiffies; atomic_dec(&sp->rx_bufs_left[ring_no]); return SUCCESS; @@ -4842,6 +5061,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) u16 subid; mac_info_t *mac_control; struct config_param *config; + int mode; #ifdef CONFIG_S2IO_NAPI DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n"); @@ -4898,6 +5118,12 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) sp->high_dma_flag = dma_flag; sp->device_enabled_once = FALSE; + if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) || + (pdev->device == PCI_DEVICE_ID_HERC_UNI)) + sp->device_type = XFRAME_II_DEVICE; + else + sp->device_type = XFRAME_I_DEVICE; + /* Initialize some PCI/PCI-X fields of the NIC. */ s2io_init_pci(sp); @@ -5033,7 +5259,9 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) INIT_WORK(&sp->set_link_task, (void (*)(void *)) s2io_set_link, sp); - pci_save_state(sp->pdev); + if (!(sp->device_type & XFRAME_II_DEVICE)) { + pci_save_state(sp->pdev); + } /* Setting swapper control on the NIC, for proper reset operation */ if (s2io_set_swapper(sp)) { @@ -5043,12 +5271,26 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) goto set_swap_failed; } - /* - * Fix for all "FFs" MAC address problems observed on - * Alpha platforms - */ - fix_mac_address(sp); - s2io_reset(sp); + /* Verify if the Herc works on the slot its placed into */ + if (sp->device_type & XFRAME_II_DEVICE) { + mode = s2io_verify_pci_mode(sp); + if (mode < 0) { + DBG_PRINT(ERR_DBG, "%s: ", __FUNCTION__); + DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n"); + ret = -EBADSLT; + goto set_swap_failed; + } + } + + /* Not needed for Herc */ + if (sp->device_type & XFRAME_I_DEVICE) { + /* + * Fix for all "FFs" MAC address problems observed on + * Alpha platforms + */ + fix_mac_address(sp); + s2io_reset(sp); + } /* * MAC address initialization. @@ -5073,22 +5315,13 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) sp->def_mac_addr[0].mac_addr[5] = (u8) (mac_down >> 16); sp->def_mac_addr[0].mac_addr[4] = (u8) (mac_down >> 24); - DBG_PRINT(INIT_DBG, - "DEFAULT MAC ADDR:0x%02x-%02x-%02x-%02x-%02x-%02x\n", - sp->def_mac_addr[0].mac_addr[0], - sp->def_mac_addr[0].mac_addr[1], - sp->def_mac_addr[0].mac_addr[2], - sp->def_mac_addr[0].mac_addr[3], - sp->def_mac_addr[0].mac_addr[4], - sp->def_mac_addr[0].mac_addr[5]); - /* Set the factory defined MAC address initially */ dev->addr_len = ETH_ALEN; memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN); /* * Initialize the tasklet status and link state flags - * and the card statte parameter + * and the card state parameter */ atomic_set(&(sp->card_state), 0); sp->tasklet_status = 0; @@ -5123,9 +5356,46 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) goto register_failed; } + if (sp->device_type & XFRAME_II_DEVICE) { + DBG_PRINT(ERR_DBG, "%s: Neterion Xframe II 10GbE adapter ", + dev->name); + DBG_PRINT(ERR_DBG, "(rev %d), Driver %s\n", + get_xena_rev_id(sp->pdev), + s2io_driver_version); + DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n", + sp->def_mac_addr[0].mac_addr[0], + sp->def_mac_addr[0].mac_addr[1], + sp->def_mac_addr[0].mac_addr[2], + sp->def_mac_addr[0].mac_addr[3], + sp->def_mac_addr[0].mac_addr[4], + sp->def_mac_addr[0].mac_addr[5]); + int mode = s2io_print_pci_mode(sp); + if (mode < 0) { + DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode "); + ret = -EBADSLT; + goto set_swap_failed; + } + } else { + DBG_PRINT(ERR_DBG, "%s: Neterion Xframe I 10GbE adapter ", + dev->name); + DBG_PRINT(ERR_DBG, "(rev %d), Driver %s\n", + get_xena_rev_id(sp->pdev), + s2io_driver_version); + DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n", + sp->def_mac_addr[0].mac_addr[0], + sp->def_mac_addr[0].mac_addr[1], + sp->def_mac_addr[0].mac_addr[2], + sp->def_mac_addr[0].mac_addr[3], + sp->def_mac_addr[0].mac_addr[4], + sp->def_mac_addr[0].mac_addr[5]); + } + /* Initialize device name */ strcpy(sp->name, dev->name); - strcat(sp->name, ": Neterion Xframe I 10GbE adapter"); + if (sp->device_type & XFRAME_II_DEVICE) + strcat(sp->name, ": Neterion Xframe II 10GbE adapter"); + else + strcat(sp->name, ": Neterion Xframe I 10GbE adapter"); /* * Make Link state as off at this point, when the Link change diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index b924ef21814a..df8cfd0475be 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -201,6 +201,67 @@ typedef struct stat_block { u32 rxf_wr_cnt; u32 txf_rd_cnt; +/* Tx MAC statistics overflow counters. */ + u32 tmac_data_octets_oflow; + u32 tmac_frms_oflow; + u32 tmac_bcst_frms_oflow; + u32 tmac_mcst_frms_oflow; + u32 tmac_ucst_frms_oflow; + u32 tmac_ttl_octets_oflow; + u32 tmac_any_err_frms_oflow; + u32 tmac_nucst_frms_oflow; + u64 tmac_vlan_frms; + u32 tmac_drop_ip_oflow; + u32 tmac_vld_ip_oflow; + u32 tmac_rst_tcp_oflow; + u32 tmac_icmp_oflow; + u32 tpa_unknown_protocol; + u32 tmac_udp_oflow; + u32 reserved_10; + u32 tpa_parse_failure; + +/* Rx MAC Statistics overflow counters. */ + u32 rmac_data_octets_oflow; + u32 rmac_vld_frms_oflow; + u32 rmac_vld_bcst_frms_oflow; + u32 rmac_vld_mcst_frms_oflow; + u32 rmac_accepted_ucst_frms_oflow; + u32 rmac_ttl_octets_oflow; + u32 rmac_discarded_frms_oflow; + u32 rmac_accepted_nucst_frms_oflow; + u32 rmac_usized_frms_oflow; + u32 rmac_drop_events_oflow; + u32 rmac_frag_frms_oflow; + u32 rmac_osized_frms_oflow; + u32 rmac_ip_oflow; + u32 rmac_jabber_frms_oflow; + u32 rmac_icmp_oflow; + u32 rmac_drop_ip_oflow; + u32 rmac_err_drp_udp_oflow; + u32 rmac_udp_oflow; + u32 reserved_11; + u32 rmac_pause_cnt_oflow; + u64 rmac_ttl_1519_4095_frms; + u64 rmac_ttl_4096_8191_frms; + u64 rmac_ttl_8192_max_frms; + u64 rmac_ttl_gt_max_frms; + u64 rmac_osized_alt_frms; + u64 rmac_jabber_alt_frms; + u64 rmac_gt_max_alt_frms; + u64 rmac_vlan_frms; + u32 rmac_len_discard; + u32 rmac_fcs_discard; + u32 rmac_pf_discard; + u32 rmac_da_discard; + u32 rmac_red_discard; + u32 rmac_rts_discard; + u32 reserved_12; + u32 rmac_ingm_full_discard; + u32 reserved_13; + u32 rmac_accepted_ip_oflow; + u32 reserved_14; + u32 link_fault_cnt; + /* Software statistics maintained by driver */ swStat_t sw_stat; } StatInfo_t; @@ -690,6 +751,9 @@ struct s2io_nic { atomic_t card_state; volatile unsigned long link_state; struct vlan_group *vlgrp; +#define XFRAME_I_DEVICE 1 +#define XFRAME_II_DEVICE 2 + u8 device_type; spinlock_t rx_lock; atomic_t isr_cnt; -- cgit v1.2.1 From b6e3f9828b9dc188cfe80364365cc68bf45df949 Mon Sep 17 00:00:00 2001 From: "raghavendra.koushik@neterion.com" Date: Wed, 3 Aug 2005 12:38:01 -0700 Subject: [PATCH] S2io: Support for bimodal interrupts Hi, This is a patch to provide bimodal interrupt moderation support for Xframe II adapter. Basically, in this moderation scheme, the adapter raises a traffic interrupt if the no. of packets transmitted and/or received reaches a programmable threshold. Signed-off-by: Ravinandan Arakali Signed-off-by: Raghavendra Koushik Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 122 ++++++++++++++++++++++++++++++++++++----------------- drivers/net/s2io.h | 3 +- 2 files changed, 85 insertions(+), 40 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 15e2ee9f9703..f430ffe7d6f8 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -297,6 +297,7 @@ static unsigned int mc_pause_threshold_q4q7 = 187; static unsigned int shared_splits; static unsigned int tmac_util_period = 5; static unsigned int rmac_util_period = 5; +static unsigned int bimodal = 0; #ifndef CONFIG_S2IO_NAPI static unsigned int indicate_max_pkts; #endif @@ -1306,52 +1307,86 @@ static int init_nic(struct s2io_nic *nic) time++; } + if (nic->config.bimodal) { + int k = 0; + for (k = 0; k < config->rx_ring_num; k++) { + val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD; + val64 |= TTI_CMD_MEM_OFFSET(0x38+k); + writeq(val64, &bar0->tti_command_mem); - /* RTI Initialization */ - if (nic->device_type == XFRAME_II_DEVICE) { /* - * Programmed to generate Apprx 500 Intrs per - * second - */ - int count = (nic->config.bus_speed * 125)/4; - val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count); + * Once the operation completes, the Strobe bit of the command + * register will be reset. We poll for this particular condition + * We wait for a maximum of 500ms for the operation to complete, + * if it's not complete by then we return error. + */ + time = 0; + while (TRUE) { + val64 = readq(&bar0->tti_command_mem); + if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) { + break; + } + if (time > 10) { + DBG_PRINT(ERR_DBG, + "%s: TTI init Failed\n", + dev->name); + return -1; + } + time++; + msleep(50); + } + } } else { - val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF); - } - val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) | - RTI_DATA1_MEM_RX_URNG_B(0x10) | - RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN; - writeq(val64, &bar0->rti_data1_mem); + /* RTI Initialization */ + if (nic->device_type == XFRAME_II_DEVICE) { + /* + * Programmed to generate Apprx 500 Intrs per + * second + */ + int count = (nic->config.bus_speed * 125)/4; + val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count); + } else { + val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF); + } + val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) | + RTI_DATA1_MEM_RX_URNG_B(0x10) | + RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN; - val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) | - RTI_DATA2_MEM_RX_UFC_B(0x2) | - RTI_DATA2_MEM_RX_UFC_C(0x40) | RTI_DATA2_MEM_RX_UFC_D(0x80); - writeq(val64, &bar0->rti_data2_mem); + writeq(val64, &bar0->rti_data1_mem); - val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD; - writeq(val64, &bar0->rti_command_mem); + val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) | + RTI_DATA2_MEM_RX_UFC_B(0x2) | + RTI_DATA2_MEM_RX_UFC_C(0x40) | RTI_DATA2_MEM_RX_UFC_D(0x80); + writeq(val64, &bar0->rti_data2_mem); - /* - * Once the operation completes, the Strobe bit of the - * command register will be reset. We poll for this - * particular condition. We wait for a maximum of 500ms - * for the operation to complete, if it's not complete - * by then we return error. - */ - time = 0; - while (TRUE) { - val64 = readq(&bar0->rti_command_mem); - if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) { - break; - } - if (time > 10) { - DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n", - dev->name); - return -1; + for (i = 0; i < config->rx_ring_num; i++) { + val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD + | RTI_CMD_MEM_OFFSET(i); + writeq(val64, &bar0->rti_command_mem); + + /* + * Once the operation completes, the Strobe bit of the + * command register will be reset. We poll for this + * particular condition. We wait for a maximum of 500ms + * for the operation to complete, if it's not complete + * by then we return error. + */ + time = 0; + while (TRUE) { + val64 = readq(&bar0->rti_command_mem); + if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) { + break; + } + if (time > 10) { + DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n", + dev->name); + return -1; + } + time++; + msleep(50); + } } - time++; - msleep(50); } /* @@ -1789,6 +1824,8 @@ static int start_nic(struct s2io_nic *nic) &bar0->prc_rxd0_n[i]); val64 = readq(&bar0->prc_ctrl_n[i]); + if (nic->config.bimodal) + val64 |= PRC_CTRL_BIMODAL_INTERRUPT; #ifndef CONFIG_2BUFF_MODE val64 |= PRC_CTRL_RC_ENABLED; #else @@ -5030,6 +5067,7 @@ module_param(mc_pause_threshold_q4q7, int, 0); module_param(shared_splits, int, 0); module_param(tmac_util_period, int, 0); module_param(rmac_util_period, int, 0); +module_param(bimodal, bool, 0); #ifndef CONFIG_S2IO_NAPI module_param(indicate_max_pkts, int, 0); #endif @@ -5397,6 +5435,14 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) else strcat(sp->name, ": Neterion Xframe I 10GbE adapter"); + /* Initialize bimodal Interrupts */ + sp->config.bimodal = bimodal; + if (!(sp->device_type & XFRAME_II_DEVICE) && bimodal) { + sp->config.bimodal = 0; + DBG_PRINT(ERR_DBG,"%s:Bimodal intr not supported by Xframe I\n", + dev->name); + } + /* * Make Link state as off at this point, when the Link change * interrupt comes the state will be automatically changed to diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index df8cfd0475be..946314503daa 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -261,8 +261,6 @@ typedef struct stat_block { u32 rmac_accepted_ip_oflow; u32 reserved_14; u32 link_fault_cnt; - -/* Software statistics maintained by driver */ swStat_t sw_stat; } StatInfo_t; @@ -349,6 +347,7 @@ struct config_param { #define MAX_RX_BLOCKS_PER_RING 150 rx_ring_config_t rx_cfg[MAX_RX_RINGS]; /*Per-Rx Ring config */ + u8 bimodal; /*Flag for setting bimodal interrupts*/ #define HEADER_ETHERNET_II_802_3_SIZE 14 #define HEADER_802_2_SIZE 3 -- cgit v1.2.1 From a371a07de9bce837ea4e84569a2b390a42e360ef Mon Sep 17 00:00:00 2001 From: "raghavendra.koushik@neterion.com" Date: Wed, 3 Aug 2005 12:38:59 -0700 Subject: [PATCH] S2io: New link handling scheme for Xframe II Hi, The below patch implements a new "Link state change handling" scheme supported by the Xframe II adapter. It also bumps up the driver version to 2.0.2.0. Signed-off-by: Ravinandan Arakali Signed-off-by: Raghavendra Koushik Signed-off-by: Jeff Garzik --- drivers/net/s2io-regs.h | 8 ++- drivers/net/s2io.c | 147 +++++++++++++++++++++++++++++++++++++----------- 2 files changed, 121 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h index 159d87648f64..2234a8f05eb2 100644 --- a/drivers/net/s2io-regs.h +++ b/drivers/net/s2io-regs.h @@ -167,7 +167,11 @@ typedef struct _XENA_dev_config { u8 unused4[0x08]; u64 gpio_int_reg; +#define GPIO_INT_REG_LINK_DOWN BIT(1) +#define GPIO_INT_REG_LINK_UP BIT(2) u64 gpio_int_mask; +#define GPIO_INT_MASK_LINK_DOWN BIT(1) +#define GPIO_INT_MASK_LINK_UP BIT(2) u64 gpio_alarms; u8 unused5[0x38]; @@ -279,8 +283,10 @@ typedef struct _XENA_dev_config { u64 gpio_control; #define GPIO_CTRL_GPIO_0 BIT(8) + u64 misc_control; +#define MISC_LINK_STABILITY_PRD(val) vBIT(val,29,3) - u8 unused7_1[0x240 - 0x200]; + u8 unused7_1[0x240 - 0x208]; u64 wreq_split_mask; #define WREQ_SPLIT_MASK_SET_MASK(val) vBIT(val, 52, 12) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index f430ffe7d6f8..e7c428561e3f 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -67,7 +67,7 @@ /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; -static char s2io_driver_version[] = "Version 1.7.7"; +static char s2io_driver_version[] = "Version 2.0.2.0"; static inline int RXD_IS_UP2DT(RxD_t *rxdp) { @@ -1456,8 +1456,28 @@ static int init_nic(struct s2io_nic *nic) writeq(val64, &bar0->wreq_split_mask); } + /* Setting Link stability period to 64 ms */ + if (nic->device_type == XFRAME_II_DEVICE) { + val64 = MISC_LINK_STABILITY_PRD(3); + writeq(val64, &bar0->misc_control); + } + return SUCCESS; } +#define LINK_UP_DOWN_INTERRUPT 1 +#define MAC_RMAC_ERR_TIMER 2 + +#if defined(CONFIG_MSI_MODE) || defined(CONFIG_MSIX_MODE) +#define s2io_link_fault_indication(x) MAC_RMAC_ERR_TIMER +#else +int s2io_link_fault_indication(nic_t *nic) +{ + if (nic->device_type == XFRAME_II_DEVICE) + return LINK_UP_DOWN_INTERRUPT; + else + return MAC_RMAC_ERR_TIMER; +} +#endif /** * en_dis_able_nic_intrs - Enable or Disable the interrupts @@ -1485,11 +1505,22 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) temp64 &= ~((u64) val64); writeq(temp64, &bar0->general_int_mask); /* - * Disabled all PCIX, Flash, MDIO, IIC and GPIO + * If Hercules adapter enable GPIO otherwise + * disabled all PCIX, Flash, MDIO, IIC and GPIO * interrupts for now. * TODO */ - writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask); + if (s2io_link_fault_indication(nic) == + LINK_UP_DOWN_INTERRUPT ) { + temp64 = readq(&bar0->pic_int_mask); + temp64 &= ~((u64) PIC_INT_GPIO); + writeq(temp64, &bar0->pic_int_mask); + temp64 = readq(&bar0->gpio_int_mask); + temp64 &= ~((u64) GPIO_INT_MASK_LINK_UP); + writeq(temp64, &bar0->gpio_int_mask); + } else { + writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask); + } /* * No MSI Support is available presently, so TTI and * RTI interrupts are also disabled. @@ -1580,17 +1611,8 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) writeq(temp64, &bar0->general_int_mask); /* * All MAC block error interrupts are disabled for now - * except the link status change interrupt. * TODO */ - val64 = MAC_INT_STATUS_RMAC_INT; - temp64 = readq(&bar0->mac_int_mask); - temp64 &= ~((u64) val64); - writeq(temp64, &bar0->mac_int_mask); - - val64 = readq(&bar0->mac_rmac_err_mask); - val64 &= ~((u64) RMAC_LINK_STATE_CHANGE_INT); - writeq(val64, &bar0->mac_rmac_err_mask); } else if (flag == DISABLE_INTRS) { /* * Disable MAC Intrs in the general intr mask register @@ -1879,8 +1901,10 @@ static int start_nic(struct s2io_nic *nic) } /* Enable select interrupts */ - interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | TX_MAC_INTR | - RX_MAC_INTR | MC_INTR; + interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | MC_INTR; + interruptible |= TX_PIC_INTR | RX_PIC_INTR; + interruptible |= TX_MAC_INTR | RX_MAC_INTR; + en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS); /* @@ -2004,8 +2028,9 @@ static void stop_nic(struct s2io_nic *nic) config = &nic->config; /* Disable all interrupts */ - interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | TX_MAC_INTR | - RX_MAC_INTR | MC_INTR; + interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | MC_INTR; + interruptible |= TX_PIC_INTR | RX_PIC_INTR; + interruptible |= TX_MAC_INTR | RX_MAC_INTR; en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS); /* Disable PRCs */ @@ -2618,10 +2643,12 @@ static void alarm_intr_handler(struct s2io_nic *nic) register u64 val64 = 0, err_reg = 0; /* Handling link status change error Intr */ - err_reg = readq(&bar0->mac_rmac_err_reg); - writeq(err_reg, &bar0->mac_rmac_err_reg); - if (err_reg & RMAC_LINK_STATE_CHANGE_INT) { - schedule_work(&nic->set_link_task); + if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) { + err_reg = readq(&bar0->mac_rmac_err_reg); + writeq(err_reg, &bar0->mac_rmac_err_reg); + if (err_reg & RMAC_LINK_STATE_CHANGE_INT) { + schedule_work(&nic->set_link_task); + } } /* Handling Ecc errors */ @@ -2947,7 +2974,7 @@ int s2io_open(struct net_device *dev) * Nic is initialized */ netif_carrier_off(dev); - sp->last_link_state = 0; /* Unkown link state */ + sp->last_link_state = LINK_DOWN; /* Initialize H/W and enable interrupts */ if (s2io_card_up(sp)) { @@ -3159,6 +3186,53 @@ s2io_alarm_handle(unsigned long data) mod_timer(&sp->alarm_timer, jiffies + HZ / 2); } +static void s2io_txpic_intr_handle(nic_t *sp) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) sp->bar0; + u64 val64; + + val64 = readq(&bar0->pic_int_status); + if (val64 & PIC_INT_GPIO) { + val64 = readq(&bar0->gpio_int_reg); + if ((val64 & GPIO_INT_REG_LINK_DOWN) && + (val64 & GPIO_INT_REG_LINK_UP)) { + val64 |= GPIO_INT_REG_LINK_DOWN; + val64 |= GPIO_INT_REG_LINK_UP; + writeq(val64, &bar0->gpio_int_reg); + goto masking; + } + + if (((sp->last_link_state == LINK_UP) && + (val64 & GPIO_INT_REG_LINK_DOWN)) || + ((sp->last_link_state == LINK_DOWN) && + (val64 & GPIO_INT_REG_LINK_UP))) { + val64 = readq(&bar0->gpio_int_mask); + val64 |= GPIO_INT_MASK_LINK_DOWN; + val64 |= GPIO_INT_MASK_LINK_UP; + writeq(val64, &bar0->gpio_int_mask); + s2io_set_link((unsigned long)sp); + } +masking: + if (sp->last_link_state == LINK_UP) { + /*enable down interrupt */ + val64 = readq(&bar0->gpio_int_mask); + /* unmasks link down intr */ + val64 &= ~GPIO_INT_MASK_LINK_DOWN; + /* masks link up intr */ + val64 |= GPIO_INT_MASK_LINK_UP; + writeq(val64, &bar0->gpio_int_mask); + } else { + /*enable UP Interrupt */ + val64 = readq(&bar0->gpio_int_mask); + /* unmasks link up interrupt */ + val64 &= ~GPIO_INT_MASK_LINK_UP; + /* masks link down interrupt */ + val64 |= GPIO_INT_MASK_LINK_DOWN; + writeq(val64, &bar0->gpio_int_mask); + } + } +} + /** * s2io_isr - ISR handler of the device . * @irq: the irq of the device. @@ -3241,6 +3315,8 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) tx_intr_handler(&mac_control->fifos[i]); } + if (reason & GEN_INTR_TXPIC) + s2io_txpic_intr_handle(sp); /* * If the Rx buffer count is below the panic threshold then * reallocate the buffers from the interrupt handler itself, @@ -4644,11 +4720,13 @@ static void s2io_set_link(unsigned long data) } subid = nic->pdev->subsystem_device; - /* - * Allow a small delay for the NICs self initiated - * cleanup to complete. - */ - msleep(100); + if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) { + /* + * Allow a small delay for the NICs self initiated + * cleanup to complete. + */ + msleep(100); + } val64 = readq(&bar0->adapter_status); if (verify_xena_quiescence(nic, val64, nic->device_enabled_once)) { @@ -4666,13 +4744,16 @@ static void s2io_set_link(unsigned long data) val64 |= ADAPTER_LED_ON; writeq(val64, &bar0->adapter_control); } - val64 = readq(&bar0->adapter_status); - if (!LINK_IS_UP(val64)) { - DBG_PRINT(ERR_DBG, "%s:", dev->name); - DBG_PRINT(ERR_DBG, " Link down"); - DBG_PRINT(ERR_DBG, "after "); - DBG_PRINT(ERR_DBG, "enabling "); - DBG_PRINT(ERR_DBG, "device \n"); + if (s2io_link_fault_indication(nic) == + MAC_RMAC_ERR_TIMER) { + val64 = readq(&bar0->adapter_status); + if (!LINK_IS_UP(val64)) { + DBG_PRINT(ERR_DBG, "%s:", dev->name); + DBG_PRINT(ERR_DBG, " Link down"); + DBG_PRINT(ERR_DBG, "after "); + DBG_PRINT(ERR_DBG, "enabling "); + DBG_PRINT(ERR_DBG, "device \n"); + } } if (nic->device_enabled_once == FALSE) { nic->device_enabled_once = TRUE; -- cgit v1.2.1 From 0b1f7ebe455ba4f1f46e7024150eeddbbf08addc Mon Sep 17 00:00:00 2001 From: "raghavendra.koushik@neterion.com" Date: Wed, 3 Aug 2005 12:39:56 -0700 Subject: [PATCH] S2io: Miscellaneous fixes Hi, The last patch in this series fixes the following issues found during testing. 1. Ensure we don't pass zero sized buffers to the card(which can lockup) 2. Restore the PCI-X parameters(in case of Xframe I adapter) after a reset. 3. Make sure total size of all FIFOs does not exceed 8192. Signed-off-by: Ravinandan Arakali Signed-off-by: Raghavendra Koushik Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 46 ++++++++++++++++++++++++++++++++++------------ 1 file changed, 34 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index e7c428561e3f..abf910e40334 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -365,10 +365,9 @@ static int init_shared_mem(struct s2io_nic *nic) size += config->tx_cfg[i].fifo_len; } if (size > MAX_AVAILABLE_TXDS) { - DBG_PRINT(ERR_DBG, "%s: Total number of Tx FIFOs ", - dev->name); - DBG_PRINT(ERR_DBG, "exceeds the maximum value "); - DBG_PRINT(ERR_DBG, "that can be used\n"); + DBG_PRINT(ERR_DBG, "%s: Requested TxDs too high, ", + __FUNCTION__); + DBG_PRINT(ERR_DBG, "Requested: %d, max supported: 8192\n", size); return FAILURE; } @@ -611,8 +610,9 @@ static void free_shared_mem(struct s2io_nic *nic) lst_per_page); for (j = 0; j < page_num; j++) { int mem_blks = (j * lst_per_page); - if (!mac_control->fifos[i].list_info[mem_blks]. - list_virt_addr) + if ((!mac_control->fifos[i].list_info) || + (!mac_control->fifos[i].list_info[mem_blks]. + list_virt_addr)) break; pci_free_consistent(nic->pdev, PAGE_SIZE, mac_control->fifos[i]. @@ -2594,6 +2594,8 @@ static void tx_intr_handler(fifo_info_t *fifo_data) for (j = 0; j < frg_cnt; j++, txdlp++) { skb_frag_t *frag = &skb_shinfo(skb)->frags[j]; + if (!txdlp->Buffer_Pointer) + break; pci_unmap_page(nic->pdev, (dma_addr_t) txdlp-> @@ -2744,6 +2746,10 @@ void s2io_reset(nic_t * sp) u64 val64; u16 subid, pci_cmd; + /* Back up the PCI-X CMD reg, dont want to lose MMRBC, OST settings */ + if (sp->device_type == XFRAME_I_DEVICE) + pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd)); + val64 = SW_RESET_ALL; writeq(val64, &bar0->sw_reset); @@ -2762,8 +2768,10 @@ void s2io_reset(nic_t * sp) msleep(250); if (!(sp->device_type & XFRAME_II_DEVICE)) { - /* Restore the PCI state saved during initializarion. */ + /* Restore the PCI state saved during initializarion. */ pci_restore_state(sp->pdev); + pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, + pci_cmd); } else { pci_set_master(sp->pdev); } @@ -2974,7 +2982,7 @@ int s2io_open(struct net_device *dev) * Nic is initialized */ netif_carrier_off(dev); - sp->last_link_state = LINK_DOWN; + sp->last_link_state = 0; /* Initialize H/W and enable interrupts */ if (s2io_card_up(sp)) { @@ -3102,6 +3110,15 @@ int s2io_xmit(struct sk_buff *skb, struct net_device *dev) spin_unlock_irqrestore(&sp->tx_lock, flags); return 0; } + + /* A buffer with no data will be dropped */ + if (!skb->len) { + DBG_PRINT(TX_DBG, "%s:Buffer has no data..\n", dev->name); + dev_kfree_skb(skb); + spin_unlock_irqrestore(&sp->tx_lock, flags); + return 0; + } + #ifdef NETIF_F_TSO mss = skb_shinfo(skb)->tso_size; if (mss) { @@ -3136,6 +3153,9 @@ int s2io_xmit(struct sk_buff *skb, struct net_device *dev) /* For fragmented SKB. */ for (i = 0; i < frg_cnt; i++) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + /* A '0' length fragment will be ignored */ + if (!frag->size) + continue; txdp++; txdp->Buffer_Pointer = (u64) pci_map_page (sp->pdev, frag->page, frag->page_offset, @@ -5257,7 +5277,8 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) config = &sp->config; /* Tx side parameters. */ - tx_fifo_len[0] = DEFAULT_FIFO_LEN; /* Default value. */ + if (tx_fifo_len[0] == 0) + tx_fifo_len[0] = DEFAULT_FIFO_LEN; /* Default value. */ config->tx_fifo_num = tx_fifo_num; for (i = 0; i < MAX_TX_FIFOS; i++) { config->tx_cfg[i].fifo_len = tx_fifo_len[i]; @@ -5280,7 +5301,8 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) config->max_txds = MAX_SKB_FRAGS; /* Rx side parameters. */ - rx_ring_sz[0] = SMALL_BLK_CNT; /* Default value. */ + if (rx_ring_sz[0] == 0) + rx_ring_sz[0] = SMALL_BLK_CNT; /* Default value. */ config->rx_ring_num = rx_ring_num; for (i = 0; i < MAX_RX_RINGS; i++) { config->rx_cfg[i].num_rxd = rx_ring_sz[i] * @@ -5310,7 +5332,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) /* initialize the shared memory used by the NIC and the host */ if (init_shared_mem(sp)) { DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", - dev->name); + __FUNCTION__); ret = -ENOMEM; goto mem_alloc_failed; } @@ -5488,7 +5510,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) sp->def_mac_addr[0].mac_addr[3], sp->def_mac_addr[0].mac_addr[4], sp->def_mac_addr[0].mac_addr[5]); - int mode = s2io_print_pci_mode(sp); + mode = s2io_print_pci_mode(sp); if (mode < 0) { DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode "); ret = -EBADSLT; -- cgit v1.2.1 From 303bcb4b675d7284a1097dd1c18c995c0179883a Mon Sep 17 00:00:00 2001 From: "raghavendra.koushik@neterion.com" Date: Wed, 3 Aug 2005 12:41:38 -0700 Subject: [PATCH] S2io: Errors found during review Hi, This is a patch to incorporate comments from earlier 12 patches. It also fixes a few issues we found during this time. Following is a list of changes in this patch. Item 1 incorporates earlier comments. Issues addressed in items 2 to 4 were discovered recently. 1. wmb() call in s2io_xmit() replaced with mmiowb(). 2. The dtx_control register was earlier programmed incorrectly for Xframe II adapter. 3. As suggested by hardware team, after a reset, in case of Xframe II adapter, we clear certain spurious errors by clearing PCI-X ECC status register, "detected parity error" bit in PCI_STATUS register and PCI_STATUS bit in txpic_int register. 4. On IBM PPC platforms, we found that in the Rx buffer replenish function, two memory writes(one to the the descriptor length and another to the ownership) were getting reordered. This was causing the adapter to see the ownership transfered to it before the length was updated. One solution was to add a wmb() but since this would turnout expensive on some platforms if called for every descriptor, we set the ownership bit and other fields of '2' to 'N' Rx descriptors followed by a wmb() and then set the ownership of first descriptor ('1'). Here the value 'N' is configurable by making it a module loadable parameter (rxsync_frequency). (NOTE: This parameter is a power of 2). 5. Bumped up the driver version no. to 2.0.2.1 Signed-off-by: Ravinandan Arakali Signed-off-by: Raghavendra Koushik Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 54 ++++++++++++++++++++++++++++++++++++++++-------------- drivers/net/s2io.h | 5 ----- 2 files changed, 40 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index abf910e40334..e083351e3f42 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -67,7 +67,7 @@ /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; -static char s2io_driver_version[] = "Version 2.0.2.0"; +static char s2io_driver_version[] = "Version 2.0.2.1"; static inline int RXD_IS_UP2DT(RxD_t *rxdp) { @@ -301,6 +301,8 @@ static unsigned int bimodal = 0; #ifndef CONFIG_S2IO_NAPI static unsigned int indicate_max_pkts; #endif +/* Frequency of Rx desc syncs expressed as power of 2 */ +static unsigned int rxsync_frequency = 3; /* * S2IO device table. @@ -837,7 +839,7 @@ static int init_nic(struct s2io_nic *nic) */ if (nic->device_type & XFRAME_II_DEVICE) { while (herc_act_dtx_cfg[dtx_cnt] != END_SIGN) { - SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt], + SPECIAL_REG_WRITE(herc_act_dtx_cfg[dtx_cnt], &bar0->dtx_control, UF); if (dtx_cnt & 0x1) msleep(1); /* Necessary!! */ @@ -2083,6 +2085,7 @@ int fill_rx_buffers(struct s2io_nic *nic, int ring_no) #ifndef CONFIG_S2IO_NAPI unsigned long flags; #endif + RxD_t *first_rxdp = NULL; mac_control = &nic->mac_control; config = &nic->config; @@ -2202,6 +2205,10 @@ int fill_rx_buffers(struct s2io_nic *nic, int ring_no) if (!skb) { DBG_PRINT(ERR_DBG, "%s: Out of ", dev->name); DBG_PRINT(ERR_DBG, "memory to allocate SKBs\n"); + if (first_rxdp) { + wmb(); + first_rxdp->Control_1 |= RXD_OWN_XENA; + } return -ENOMEM; } #ifndef CONFIG_2BUFF_MODE @@ -2212,7 +2219,8 @@ int fill_rx_buffers(struct s2io_nic *nic, int ring_no) rxdp->Control_2 &= (~MASK_BUFFER0_SIZE); rxdp->Control_2 |= SET_BUFFER0_SIZE(size); rxdp->Host_Control = (unsigned long) (skb); - rxdp->Control_1 |= RXD_OWN_XENA; + if (alloc_tab & ((1 << rxsync_frequency) - 1)) + rxdp->Control_1 |= RXD_OWN_XENA; off++; off %= (MAX_RXDS_PER_BLOCK + 1); mac_control->rings[ring_no].rx_curr_put_info.offset = off; @@ -2239,17 +2247,34 @@ int fill_rx_buffers(struct s2io_nic *nic, int ring_no) rxdp->Control_2 |= SET_BUFFER1_SIZE(1); /* dummy. */ rxdp->Control_2 |= BIT(0); /* Set Buffer_Empty bit. */ rxdp->Host_Control = (u64) ((unsigned long) (skb)); - rxdp->Control_1 |= RXD_OWN_XENA; + if (alloc_tab & ((1 << rxsync_frequency) - 1)) + rxdp->Control_1 |= RXD_OWN_XENA; off++; mac_control->rings[ring_no].rx_curr_put_info.offset = off; #endif rxdp->Control_2 |= SET_RXD_MARKER; + if (!(alloc_tab & ((1 << rxsync_frequency) - 1))) { + if (first_rxdp) { + wmb(); + first_rxdp->Control_1 |= RXD_OWN_XENA; + } + first_rxdp = rxdp; + } atomic_inc(&nic->rx_bufs_left[ring_no]); alloc_tab++; } end: + /* Transfer ownership of first descriptor to adapter just before + * exiting. Before that, use memory barrier so that ownership + * and other fields are seen by adapter correctly. + */ + if (first_rxdp) { + wmb(); + first_rxdp->Control_1 |= RXD_OWN_XENA; + } + return SUCCESS; } @@ -2783,16 +2808,16 @@ void s2io_reset(nic_t * sp) s2io_set_swapper(sp); /* Clear certain PCI/PCI-X fields after reset */ - pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd); - pci_cmd &= 0x7FFF; /* Clear parity err detect bit */ - pci_write_config_word(sp->pdev, PCI_COMMAND, pci_cmd); + if (sp->device_type == XFRAME_II_DEVICE) { + /* Clear parity err detect bit */ + pci_write_config_word(sp->pdev, PCI_STATUS, 0x8000); - val64 = readq(&bar0->txpic_int_reg); - val64 &= ~BIT(62); /* Clearing PCI_STATUS error reflected here */ - writeq(val64, &bar0->txpic_int_reg); + /* Clearing PCIX Ecc status register */ + pci_write_config_dword(sp->pdev, 0x68, 0x7C); - /* Clearing PCIX Ecc status register */ - pci_write_config_dword(sp->pdev, 0x68, 0); + /* Clearing PCI_STATUS error reflected here */ + writeq(BIT(62), &bar0->txpic_int_reg); + } /* Reset device statistics maintained by OS */ memset(&sp->stats, 0, sizeof (struct net_device_stats)); @@ -3168,8 +3193,6 @@ int s2io_xmit(struct sk_buff *skb, struct net_device *dev) val64 = mac_control->fifos[queue].list_info[put_off].list_phy_addr; writeq(val64, &tx_fifo->TxDL_Pointer); - wmb(); - val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST | TX_FIFO_LAST_LIST); @@ -3179,6 +3202,8 @@ int s2io_xmit(struct sk_buff *skb, struct net_device *dev) #endif writeq(val64, &tx_fifo->List_Control); + mmiowb(); + put_off++; put_off %= mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1; mac_control->fifos[queue].tx_curr_put_info.offset = put_off; @@ -5172,6 +5197,7 @@ module_param(bimodal, bool, 0); #ifndef CONFIG_S2IO_NAPI module_param(indicate_max_pkts, int, 0); #endif +module_param(rxsync_frequency, int, 0); /** * s2io_init_nic - Initialization of the adapter . diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 946314503daa..5d9270730ca2 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -13,11 +13,6 @@ #ifndef _S2IO_H #define _S2IO_H -/* Enable 2 buffer mode by default for SGI system */ -#ifdef CONFIG_IA64_SGI_SN2 -#define CONFIG_2BUFF_MODE -#endif - #define TBD 0 #define BIT(loc) (0x8000000000000000ULL >> (loc)) #define vBIT(val, loc, sz) (((u64)val) << (64-loc-sz)) -- cgit v1.2.1 From 67c4f3fa25502ce7ed82fb0307e09cf36f1f81da Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 11 Aug 2005 02:07:25 -0400 Subject: Fix numerous minor problems with new phy subsystem. Includes fixes for problems noted by Adrian Bunk, Andrew Morton, and one other person lost in the annals of history (and email folders). --- drivers/net/phy/Kconfig | 12 +- drivers/net/phy/Makefile | 12 +- drivers/net/phy/mdio_bus.c | 4 +- drivers/net/phy/phy.c | 9 +- drivers/net/phy/phy.c.orig | 860 ------------------------------------------- drivers/net/phy/phy_device.c | 48 ++- 6 files changed, 53 insertions(+), 892 deletions(-) delete mode 100644 drivers/net/phy/phy.c.orig (limited to 'drivers') diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 8b5db2343cc3..c2f1bf1d02d2 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -5,7 +5,7 @@ menu "PHY device support" config PHYLIB - bool "PHY Device support and infrastructure" + tristate "PHY Device support and infrastructure" depends on NET_ETHERNET help Ethernet controllers are usually attached to PHY @@ -24,31 +24,31 @@ comment "MII PHY device drivers" depends on PHYLIB config MARVELL_PHY - bool "Drivers for Marvell PHYs" + tristate "Drivers for Marvell PHYs" depends on PHYLIB ---help--- Currently has a driver for the 88E1011S config DAVICOM_PHY - bool "Drivers for Davicom PHYs" + tristate "Drivers for Davicom PHYs" depends on PHYLIB ---help--- Currently supports dm9161e and dm9131 config QSEMI_PHY - bool "Drivers for Quality Semiconductor PHYs" + tristate "Drivers for Quality Semiconductor PHYs" depends on PHYLIB ---help--- Currently supports the qs6612 config LXT_PHY - bool "Drivers for the Intel LXT PHYs" + tristate "Drivers for the Intel LXT PHYs" depends on PHYLIB ---help--- Currently supports the lxt970, lxt971 config CICADA_PHY - bool "Drivers for the Cicada PHYs" + tristate "Drivers for the Cicada PHYs" depends on PHYLIB ---help--- Currently supports the cis8204 diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 1af05de6ced0..fb7cb385a659 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -1,9 +1,9 @@ # Makefile for Linux PHY drivers -obj-$(CONFIG_PHYLIB) += phy.o phy_device.o mdio_bus.o +libphy-objs := phy.o phy_device.o mdio_bus.o -obj-$(CONFIG_MARVELL_PHY) += marvell.o -obj-$(CONFIG_DAVICOM_PHY) += davicom.o -obj-$(CONFIG_CICADA_PHY) += cicada.o -obj-$(CONFIG_LXT_PHY) += lxt.o -obj-$(CONFIG_QSEMI_PHY) += qsemi.o +obj-$(CONFIG_MARVELL_PHY) += libphy.o marvell.o +obj-$(CONFIG_DAVICOM_PHY) += libphy.o davicom.o +obj-$(CONFIG_CICADA_PHY) += libphy.o cicada.o +obj-$(CONFIG_LXT_PHY) += libphy.o lxt.o +obj-$(CONFIG_QSEMI_PHY) += libphy.o qsemi.o diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index e75103ba6f86..5fbea6acfe80 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -165,9 +165,9 @@ struct bus_type mdio_bus_type = { .resume = mdio_bus_resume, }; -static int __init mdio_bus_init(void) +int __init mdio_bus_init(void) { return bus_register(&mdio_bus_type); } -subsys_initcall(mdio_bus_init); + diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index e2c6896b92d2..934065dd6371 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -39,7 +39,6 @@ #include #include -static void phy_change(void *data); static void phy_timer(unsigned long data); /* Convenience function to print out the current phy status @@ -464,7 +463,6 @@ void phy_stop_machine(struct phy_device *phydev) phydev->adjust_state = NULL; } -#ifdef CONFIG_PHYCONTROL /* phy_error: * * Moves the PHY to the HALTED state in response to a read @@ -479,6 +477,10 @@ void phy_error(struct phy_device *phydev) spin_unlock(&phydev->lock); } +#ifdef CONFIG_PHYCONTROL + +static void phy_change(void *data); + /* phy_interrupt * * description: When a PHY interrupt occurs, the handler disables @@ -672,6 +674,8 @@ void phy_start(struct phy_device *phydev) EXPORT_SYMBOL(phy_stop); EXPORT_SYMBOL(phy_start); +#endif /* CONFIG_PHYCONTROL */ + /* PHY timer which handles the state machine */ static void phy_timer(unsigned long data) { @@ -859,4 +863,3 @@ static void phy_timer(unsigned long data) mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ); } -#endif /* CONFIG_PHYCONTROL */ diff --git a/drivers/net/phy/phy.c.orig b/drivers/net/phy/phy.c.orig deleted file mode 100644 index 6af17cec9ace..000000000000 --- a/drivers/net/phy/phy.c.orig +++ /dev/null @@ -1,860 +0,0 @@ -/* - * drivers/net/phy/phy.c - * - * Framework for configuring and reading PHY devices - * Based on code in sungem_phy.c and gianfar_phy.c - * - * Author: Andy Fleming - * - * Copyright (c) 2004 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -static void phy_change(void *data); -static void phy_timer(unsigned long data); - -/* Convenience function to print out the current phy status - */ -void phy_print_status(struct phy_device *phydev) -{ - pr_info("%s: Link is %s", phydev->dev.bus_id, - phydev->link ? "Up" : "Down"); - if (phydev->link) - printk(" - %d/%s", phydev->speed, - DUPLEX_FULL == phydev->duplex ? - "Full" : "Half"); - - printk("\n"); -} -EXPORT_SYMBOL(phy_print_status); - - -/* Convenience functions for reading/writing a given PHY - * register. They MUST NOT be called from interrupt context, - * because the bus read/write functions may wait for an interrupt - * to conclude the operation. */ -int phy_read(struct phy_device *phydev, u16 regnum) -{ - int retval; - struct mii_bus *bus = phydev->bus; - - spin_lock_bh(&bus->mdio_lock); - retval = bus->read(bus, phydev->addr, regnum); - spin_unlock_bh(&bus->mdio_lock); - - return retval; -} -EXPORT_SYMBOL(phy_read); - -int phy_write(struct phy_device *phydev, u16 regnum, u16 val) -{ - int err; - struct mii_bus *bus = phydev->bus; - - spin_lock_bh(&bus->mdio_lock); - err = bus->write(bus, phydev->addr, regnum, val); - spin_unlock_bh(&bus->mdio_lock); - - return err; -} -EXPORT_SYMBOL(phy_write); - - -int phy_clear_interrupt(struct phy_device *phydev) -{ - int err = 0; - - if (phydev->drv->ack_interrupt) - err = phydev->drv->ack_interrupt(phydev); - - return err; -} - - -int phy_config_interrupt(struct phy_device *phydev, u32 interrupts) -{ - int err = 0; - - phydev->interrupts = interrupts; - if (phydev->drv->config_intr) - err = phydev->drv->config_intr(phydev); - - return err; -} - - -/* phy_aneg_done - * - * description: Reads the status register and returns 0 either if - * auto-negotiation is incomplete, or if there was an error. - * Returns BMSR_ANEGCOMPLETE if auto-negotiation is done. - */ -static inline int phy_aneg_done(struct phy_device *phydev) -{ - int retval; - - retval = phy_read(phydev, MII_BMSR); - - return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE); -} - -/* phy_start_aneg - * - * description: Calls the PHY driver's config_aneg, and then - * sets the PHY state to PHY_AN if auto-negotiation is enabled, - * and to PHY_FORCING if auto-negotiation is disabled. Unless - * the PHY is currently HALTED. - */ -int phy_start_aneg(struct phy_device *phydev) -{ - int err; - - spin_lock(&phydev->lock); - - if (AUTONEG_DISABLE == phydev->autoneg) - phy_sanitize_settings(phydev); - - err = phydev->drv->config_aneg(phydev); - - if (err < 0) - goto out_unlock; - - if (phydev->state != PHY_HALTED) { - if (AUTONEG_ENABLE == phydev->autoneg) { - phydev->state = PHY_AN; - phydev->link_timeout = PHY_AN_TIMEOUT; - } else { - phydev->state = PHY_FORCING; - phydev->link_timeout = PHY_FORCE_TIMEOUT; - } - } - -out_unlock: - spin_unlock(&phydev->lock); - return err; -} -EXPORT_SYMBOL(phy_start_aneg); - - -/* A structure for mapping a particular speed and duplex - * combination to a particular SUPPORTED and ADVERTISED value */ -struct phy_setting { - int speed; - int duplex; - u32 setting; -}; - -/* A mapping of all SUPPORTED settings to speed/duplex */ -static struct phy_setting settings[] = { - { - .speed = 10000, - .duplex = DUPLEX_FULL, - .setting = SUPPORTED_10000baseT_Full, - }, - { - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, - .setting = SUPPORTED_1000baseT_Full, - }, - { - .speed = SPEED_1000, - .duplex = DUPLEX_HALF, - .setting = SUPPORTED_1000baseT_Half, - }, - { - .speed = SPEED_100, - .duplex = DUPLEX_FULL, - .setting = SUPPORTED_100baseT_Full, - }, - { - .speed = SPEED_100, - .duplex = DUPLEX_HALF, - .setting = SUPPORTED_100baseT_Half, - }, - { - .speed = SPEED_10, - .duplex = DUPLEX_FULL, - .setting = SUPPORTED_10baseT_Full, - }, - { - .speed = SPEED_10, - .duplex = DUPLEX_HALF, - .setting = SUPPORTED_10baseT_Half, - }, -}; - -#define MAX_NUM_SETTINGS (sizeof(settings)/sizeof(struct phy_setting)) - -/* phy_find_setting - * - * description: Searches the settings array for the setting which - * matches the desired speed and duplex, and returns the index - * of that setting. Returns the index of the last setting if - * none of the others match. - */ -static inline int phy_find_setting(int speed, int duplex) -{ - int idx = 0; - - while (idx < ARRAY_SIZE(settings) && - (settings[idx].speed != speed || - settings[idx].duplex != duplex)) - idx++; - - return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1; -} - -/* phy_find_valid - * idx: The first index in settings[] to search - * features: A mask of the valid settings - * - * description: Returns the index of the first valid setting less - * than or equal to the one pointed to by idx, as determined by - * the mask in features. Returns the index of the last setting - * if nothing else matches. - */ -static inline int phy_find_valid(int idx, u32 features) -{ - while (idx < MAX_NUM_SETTINGS && !(settings[idx].setting & features)) - idx++; - - return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1; -} - -/* phy_sanitize_settings - * - * description: Make sure the PHY is set to supported speeds and - * duplexes. Drop down by one in this order: 1000/FULL, - * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF - */ -void phy_sanitize_settings(struct phy_device *phydev) -{ - u32 features = phydev->supported; - int idx; - - /* Sanitize settings based on PHY capabilities */ - if ((features & SUPPORTED_Autoneg) == 0) - phydev->autoneg = 0; - - idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex), - features); - - phydev->speed = settings[idx].speed; - phydev->duplex = settings[idx].duplex; -} -EXPORT_SYMBOL(phy_sanitize_settings); - -/* phy_force_reduction - * - * description: Reduces the speed/duplex settings by - * one notch. The order is so: - * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF, - * 10/FULL, 10/HALF. The function bottoms out at 10/HALF. - */ -static void phy_force_reduction(struct phy_device *phydev) -{ - int idx; - - idx = phy_find_setting(phydev->speed, phydev->duplex); - - idx++; - - idx = phy_find_valid(idx, phydev->supported); - - phydev->speed = settings[idx].speed; - phydev->duplex = settings[idx].duplex; - - pr_info("Trying %d/%s\n", phydev->speed, - DUPLEX_FULL == phydev->duplex ? - "FULL" : "HALF"); -} - -/* phy_ethtool_sset: - * A generic ethtool sset function. Handles all the details - * - * A few notes about parameter checking: - * - We don't set port or transceiver, so we don't care what they - * were set to. - * - phy_start_aneg() will make sure forced settings are sane, and - * choose the next best ones from the ones selected, so we don't - * care if ethtool tries to give us bad values - */ -int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd) -{ - if (cmd->phy_address != phydev->addr) - return -EINVAL; - - /* We make sure that we don't pass unsupported - * values in to the PHY */ - cmd->advertising &= phydev->supported; - - /* Verify the settings we care about. */ - if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE) - return -EINVAL; - - if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0) - return -EINVAL; - - if (cmd->autoneg == AUTONEG_DISABLE - && ((cmd->speed != SPEED_1000 - && cmd->speed != SPEED_100 - && cmd->speed != SPEED_10) - || (cmd->duplex != DUPLEX_HALF - && cmd->duplex != DUPLEX_FULL))) - return -EINVAL; - - phydev->autoneg = cmd->autoneg; - - phydev->speed = cmd->speed; - - phydev->advertising = cmd->advertising; - - if (AUTONEG_ENABLE == cmd->autoneg) - phydev->advertising |= ADVERTISED_Autoneg; - else - phydev->advertising &= ~ADVERTISED_Autoneg; - - phydev->duplex = cmd->duplex; - - /* Restart the PHY */ - phy_start_aneg(phydev); - - return 0; -} - -int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd) -{ - cmd->supported = phydev->supported; - - cmd->advertising = phydev->advertising; - - cmd->speed = phydev->speed; - cmd->duplex = phydev->duplex; - cmd->port = PORT_MII; - cmd->phy_address = phydev->addr; - cmd->transceiver = XCVR_EXTERNAL; - cmd->autoneg = phydev->autoneg; - - return 0; -} - - -/* Note that this function is currently incompatible with the - * PHYCONTROL layer. It changes registers without regard to - * current state. Use at own risk - */ -int phy_mii_ioctl(struct phy_device *phydev, - struct mii_ioctl_data *mii_data, int cmd) -{ - u16 val = mii_data->val_in; - - switch (cmd) { - case SIOCGMIIPHY: - mii_data->phy_id = phydev->addr; - break; - case SIOCGMIIREG: - mii_data->val_out = phy_read(phydev, mii_data->reg_num); - break; - - case SIOCSMIIREG: - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - - if (mii_data->phy_id == phydev->addr) { - switch(mii_data->reg_num) { - case MII_BMCR: - if (val & (BMCR_RESET|BMCR_ANENABLE)) - phydev->autoneg = AUTONEG_DISABLE; - else - phydev->autoneg = AUTONEG_ENABLE; - if ((!phydev->autoneg) && (val & BMCR_FULLDPLX)) - phydev->duplex = DUPLEX_FULL; - else - phydev->duplex = DUPLEX_HALF; - break; - case MII_ADVERTISE: - phydev->advertising = val; - break; - default: - /* do nothing */ - break; - } - } - - phy_write(phydev, mii_data->reg_num, val); - - if (mii_data->reg_num == MII_BMCR - && val & BMCR_RESET - && phydev->drv->config_init) - phydev->drv->config_init(phydev); - break; - } - - return 0; -} - -/* phy_start_machine: - * - * description: The PHY infrastructure can run a state machine - * which tracks whether the PHY is starting up, negotiating, - * etc. This function starts the timer which tracks the state - * of the PHY. If you want to be notified when the state - * changes, pass in the callback, otherwise, pass NULL. If you - * want to maintain your own state machine, do not call this - * function. */ -void phy_start_machine(struct phy_device *phydev, - void (*handler)(struct net_device *)) -{ - phydev->adjust_state = handler; - - init_timer(&phydev->phy_timer); - phydev->phy_timer.function = &phy_timer; - phydev->phy_timer.data = (unsigned long) phydev; - mod_timer(&phydev->phy_timer, jiffies + HZ); -} - -/* phy_stop_machine - * - * description: Stops the state machine timer, sets the state to - * UP (unless it wasn't up yet), and then frees the interrupt, - * if it is in use. This function must be called BEFORE - * phy_detach. - */ -void phy_stop_machine(struct phy_device *phydev) -{ - del_timer_sync(&phydev->phy_timer); - - spin_lock(&phydev->lock); - if (phydev->state > PHY_UP) - phydev->state = PHY_UP; - spin_unlock(&phydev->lock); - - if (phydev->irq != PHY_POLL) - phy_stop_interrupts(phydev); - - phydev->adjust_state = NULL; -} - -#ifdef CONFIG_PHYCONTROL -/* phy_error: - * - * Moves the PHY to the HALTED state in response to a read - * or write error, and tells the controller the link is down. - * Must not be called from interrupt context, or while the - * phydev->lock is held. - */ -void phy_error(struct phy_device *phydev) -{ - spin_lock(&phydev->lock); - phydev->state = PHY_HALTED; - spin_unlock(&phydev->lock); -} - -/* phy_interrupt - * - * description: When a PHY interrupt occurs, the handler disables - * interrupts, and schedules a work task to clear the interrupt. - */ -static irqreturn_t phy_interrupt(int irq, void *phy_dat, struct pt_regs *regs) -{ - struct phy_device *phydev = phy_dat; - - /* The MDIO bus is not allowed to be written in interrupt - * context, so we need to disable the irq here. A work - * queue will write the PHY to disable and clear the - * interrupt, and then reenable the irq line. */ - disable_irq_nosync(irq); - - schedule_work(&phydev->phy_queue); - - return IRQ_HANDLED; -} - -/* Enable the interrupts from the PHY side */ -int phy_enable_interrupts(struct phy_device *phydev) -{ - int err; - - err = phy_clear_interrupt(phydev); - - if (err < 0) - return err; - - err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); - - return err; -} - -/* Disable the PHY interrupts from the PHY side */ -int phy_disable_interrupts(struct phy_device *phydev) -{ - int err; - - /* Disable PHY interrupts */ - err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); - - if (err) - goto phy_err; - - /* Clear the interrupt */ - err = phy_clear_interrupt(phydev); - - if (err) - goto phy_err; - - return 0; - -phy_err: - phy_error(phydev); - - return err; -} - -/* phy_start_interrupts - * - * description: Request the interrupt for the given PHY. If - * this fails, then we set irq to PHY_POLL. - * Otherwise, we enable the interrupts in the PHY. - * Returns 0 on success. - * This should only be called with a valid IRQ number. - */ -int phy_start_interrupts(struct phy_device *phydev) -{ - int err = 0; - - INIT_WORK(&phydev->phy_queue, phy_change, phydev); - - if (request_irq(phydev->irq, phy_interrupt, - SA_SHIRQ, - "phy_interrupt", - phydev) < 0) { - printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n", - phydev->bus->name, - phydev->irq); - phydev->irq = PHY_POLL; - return 0; - } - - err = phy_enable_interrupts(phydev); - - return err; -} -EXPORT_SYMBOL(phy_start_interrupts); - -int phy_stop_interrupts(struct phy_device *phydev) -{ - int err; - - err = phy_disable_interrupts(phydev); - - if (err) - phy_error(phydev); - - free_irq(phydev->irq, phydev); - - return err; -} -EXPORT_SYMBOL(phy_stop_interrupts); - - -/* Scheduled by the phy_interrupt/timer to handle PHY changes */ -static void phy_change(void *data) -{ - int err; - struct phy_device *phydev = data; - - err = phy_disable_interrupts(phydev); - - if (err) - goto phy_err; - - spin_lock(&phydev->lock); - if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state)) - phydev->state = PHY_CHANGELINK; - spin_unlock(&phydev->lock); - - enable_irq(phydev->irq); - - /* Reenable interrupts */ - err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); - - if (err) - goto irq_enable_err; - - return; - -irq_enable_err: - disable_irq(phydev->irq); -phy_err: - phy_error(phydev); -} - -/* Bring down the PHY link, and stop checking the status. */ -void phy_stop(struct phy_device *phydev) -{ - spin_lock(&phydev->lock); - - if (PHY_HALTED == phydev->state) - goto out_unlock; - - if (phydev->irq != PHY_POLL) { - /* Clear any pending interrupts */ - phy_clear_interrupt(phydev); - - /* Disable PHY Interrupts */ - phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); - } - - phydev->state = PHY_HALTED; - -out_unlock: - spin_unlock(&phydev->lock); -} - - -/* phy_start - * - * description: Indicates the attached device's readiness to - * handle PHY-related work. Used during startup to start the - * PHY, and after a call to phy_stop() to resume operation. - * Also used to indicate the MDIO bus has cleared an error - * condition. - */ -void phy_start(struct phy_device *phydev) -{ - spin_lock(&phydev->lock); - - switch (phydev->state) { - case PHY_STARTING: - phydev->state = PHY_PENDING; - break; - case PHY_READY: - phydev->state = PHY_UP; - break; - case PHY_HALTED: - phydev->state = PHY_RESUMING; - default: - break; - } - spin_unlock(&phydev->lock); -} -EXPORT_SYMBOL(phy_stop); -EXPORT_SYMBOL(phy_start); - -/* PHY timer which handles the state machine */ -static void phy_timer(unsigned long data) -{ - struct phy_device *phydev = (struct phy_device *)data; - int needs_aneg = 0; - int err = 0; - - spin_lock(&phydev->lock); - - if (phydev->adjust_state) - phydev->adjust_state(phydev->attached_dev); - - switch(phydev->state) { - case PHY_DOWN: - case PHY_STARTING: - case PHY_READY: - case PHY_PENDING: - break; - case PHY_UP: - needs_aneg = 1; - - phydev->link_timeout = PHY_AN_TIMEOUT; - - break; - case PHY_AN: - /* Check if negotiation is done. Break - * if there's an error */ - err = phy_aneg_done(phydev); - if (err < 0) - break; - - /* If auto-negotiation is done, we change to - * either RUNNING, or NOLINK */ - if (err > 0) { - err = phy_read_status(phydev); - - if (err) - break; - - if (phydev->link) { - phydev->state = PHY_RUNNING; - netif_carrier_on(phydev->attached_dev); - } else { - phydev->state = PHY_NOLINK; - netif_carrier_off(phydev->attached_dev); - } - - phydev->adjust_link(phydev->attached_dev); - - } else if (0 == phydev->link_timeout--) { - /* The counter expired, so either we - * switch to forced mode, or the - * magic_aneg bit exists, and we try aneg - * again */ - if (!(phydev->drv->flags & PHY_HAS_MAGICANEG)) { - int idx; - - /* We'll start from the - * fastest speed, and work - * our way down */ - idx = phy_find_valid(0, - phydev->supported); - - phydev->speed = settings[idx].speed; - phydev->duplex = settings[idx].duplex; - - phydev->autoneg = AUTONEG_DISABLE; - phydev->state = PHY_FORCING; - phydev->link_timeout = - PHY_FORCE_TIMEOUT; - - pr_info("Trying %d/%s\n", - phydev->speed, - DUPLEX_FULL == - phydev->duplex ? - "FULL" : "HALF"); - } - - needs_aneg = 1; - } - break; - case PHY_NOLINK: - err = phy_read_status(phydev); - - if (err) - break; - - if (phydev->link) { - phydev->state = PHY_RUNNING; - netif_carrier_on(phydev->attached_dev); - phydev->adjust_link(phydev->attached_dev); - } - break; - case PHY_FORCING: - err = phy_read_status(phydev); - - if (err) - break; - - if (phydev->link) { - phydev->state = PHY_RUNNING; - netif_carrier_on(phydev->attached_dev); - } else { - if (0 == phydev->link_timeout--) { - phy_force_reduction(phydev); - needs_aneg = 1; - } - } - - phydev->adjust_link(phydev->attached_dev); - break; - case PHY_RUNNING: - /* Only register a CHANGE if we are - * polling */ - if (PHY_POLL == phydev->irq) - phydev->state = PHY_CHANGELINK; - break; - case PHY_CHANGELINK: - err = phy_read_status(phydev); - - if (err) - break; - - if (phydev->link) { - phydev->state = PHY_RUNNING; - netif_carrier_on(phydev->attached_dev); - } else { - phydev->state = PHY_NOLINK; - netif_carrier_off(phydev->attached_dev); - } - - phydev->adjust_link(phydev->attached_dev); - - if (PHY_POLL != phydev->irq) - err = phy_config_interrupt(phydev, - PHY_INTERRUPT_ENABLED); - break; - case PHY_HALTED: - if (phydev->link) { - phydev->link = 0; - netif_carrier_off(phydev->attached_dev); - phydev->adjust_link(phydev->attached_dev); - } - break; - case PHY_RESUMING: - - err = phy_clear_interrupt(phydev); - - if (err) - break; - - err = phy_config_interrupt(phydev, - PHY_INTERRUPT_ENABLED); - - if (err) - break; - - if (AUTONEG_ENABLE == phydev->autoneg) { - err = phy_aneg_done(phydev); - if (err < 0) - break; - - /* err > 0 if AN is done. - * Otherwise, it's 0, and we're - * still waiting for AN */ - if (err > 0) { - phydev->state = PHY_RUNNING; - } else { - phydev->state = PHY_AN; - phydev->link_timeout = PHY_AN_TIMEOUT; - } - } else - phydev->state = PHY_RUNNING; - break; - } - - spin_unlock(&phydev->lock); - - if (needs_aneg) - err = phy_start_aneg(phydev); - - if (err < 0) - phy_error(phydev); - - mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ); -} - -#endif /* CONFIG_PHYCONTROL */ diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index f0595af4c837..c11138330fed 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -39,6 +39,19 @@ #include #include +static int genphy_config_init(struct phy_device *phydev); + +static struct phy_driver genphy_driver = { + .phy_id = 0xffffffff, + .phy_id_mask = 0xffffffff, + .name = "Generic PHY", + .config_init = genphy_config_init, + .features = 0, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .driver = {.owner = THIS_MODULE, }, +}; + /* get_phy_device * * description: Reads the ID registers of the PHY at addr on the @@ -656,27 +669,32 @@ void phy_driver_unregister(struct phy_driver *drv) } EXPORT_SYMBOL(phy_driver_unregister); -static struct phy_driver genphy_driver = { - .phy_id = 0xffffffff, - .phy_id_mask = 0xffffffff, - .name = "Generic PHY", - .config_init = genphy_config_init, - .features = 0, - .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, - .driver = {.owner = THIS_MODULE, }, -}; -static int __init genphy_init(void) +static int __init phy_init(void) { - return phy_driver_register(&genphy_driver); + int rc; + extern int mdio_bus_init(void); + + rc = phy_driver_register(&genphy_driver); + if (rc) + goto out; + + rc = mdio_bus_init(); + if (rc) + goto out_unreg; + return 0; + +out_unreg: + phy_driver_unregister(&genphy_driver); +out: + return rc; } -static void __exit genphy_exit(void) +static void __exit phy_exit(void) { phy_driver_unregister(&genphy_driver); } -module_init(genphy_init); -module_exit(genphy_exit); +module_init(phy_init); +module_exit(phy_exit); -- cgit v1.2.1 From 2bf69b5fe90b3246ab50064c5a690a363e8c53e2 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 11 Aug 2005 02:47:54 -0400 Subject: phy subsystem: more cleanups - unexport symbols never used outside of home module - remove dead code - remove CONFIG_PHYCONTROL, make it unconditionally enabled --- drivers/net/phy/Kconfig | 8 -- drivers/net/phy/mdio_bus.c | 74 ---------------- drivers/net/phy/phy.c | 197 +++---------------------------------------- drivers/net/phy/phy_device.c | 130 +--------------------------- 4 files changed, 12 insertions(+), 397 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index c2f1bf1d02d2..6450bd71deb4 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -12,14 +12,6 @@ config PHYLIB devices. This option provides infrastructure for managing PHY devices. -config PHYCONTROL - bool "Support for automatically handling PHY state changes" - depends on PHYLIB - help - Adds code to perform all the work for keeping PHY link - state (speed/duplex/etc) up-to-date. Also handles - interrupts. - comment "MII PHY device drivers" depends on PHYLIB diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 5fbea6acfe80..d5a05be28818 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -38,80 +38,6 @@ #include #include -/* mdiobus_register - * - * description: Called by a bus driver to bring up all the PHYs - * on a given bus, and attach them to the bus - */ -int mdiobus_register(struct mii_bus *bus) -{ - int i; - int err = 0; - - spin_lock_init(&bus->mdio_lock); - - if (NULL == bus || NULL == bus->name || - NULL == bus->read || - NULL == bus->write) - return -EINVAL; - - if (bus->reset) - bus->reset(bus); - - for (i = 0; i < PHY_MAX_ADDR; i++) { - struct phy_device *phydev; - - phydev = get_phy_device(bus, i); - - if (IS_ERR(phydev)) - return PTR_ERR(phydev); - - /* There's a PHY at this address - * We need to set: - * 1) IRQ - * 2) bus_id - * 3) parent - * 4) bus - * 5) mii_bus - * And, we need to register it */ - if (phydev) { - phydev->irq = bus->irq[i]; - - phydev->dev.parent = bus->dev; - phydev->dev.bus = &mdio_bus_type; - sprintf(phydev->dev.bus_id, "phy%d:%d", bus->id, i); - - phydev->bus = bus; - - err = device_register(&phydev->dev); - - if (err) - printk(KERN_ERR "phy %d failed to register\n", - i); - } - - bus->phy_map[i] = phydev; - } - - pr_info("%s: probed\n", bus->name); - - return err; -} -EXPORT_SYMBOL(mdiobus_register); - -void mdiobus_unregister(struct mii_bus *bus) -{ - int i; - - for (i = 0; i < PHY_MAX_ADDR; i++) { - if (bus->phy_map[i]) { - device_unregister(&bus->phy_map[i]->dev); - kfree(bus->phy_map[i]); - } - } -} -EXPORT_SYMBOL(mdiobus_unregister); - /* mdio_bus_match * * description: Given a PHY device, and a PHY driver, return 1 if diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 934065dd6371..d3e43631b89b 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -40,21 +40,9 @@ #include static void phy_timer(unsigned long data); - -/* Convenience function to print out the current phy status - */ -void phy_print_status(struct phy_device *phydev) -{ - pr_info("%s: Link is %s", phydev->dev.bus_id, - phydev->link ? "Up" : "Down"); - if (phydev->link) - printk(" - %d/%s", phydev->speed, - DUPLEX_FULL == phydev->duplex ? - "Full" : "Half"); - - printk("\n"); -} -EXPORT_SYMBOL(phy_print_status); +static int phy_disable_interrupts(struct phy_device *phydev); +static void phy_sanitize_settings(struct phy_device *phydev); +static int phy_stop_interrupts(struct phy_device *phydev); /* Convenience functions for reading/writing a given PHY @@ -133,7 +121,7 @@ static inline int phy_aneg_done(struct phy_device *phydev) * and to PHY_FORCING if auto-negotiation is disabled. Unless * the PHY is currently HALTED. */ -int phy_start_aneg(struct phy_device *phydev) +static int phy_start_aneg(struct phy_device *phydev) { int err; @@ -161,8 +149,6 @@ out_unlock: spin_unlock(&phydev->lock); return err; } -EXPORT_SYMBOL(phy_start_aneg); - /* A structure for mapping a particular speed and duplex * combination to a particular SUPPORTED and ADVERTISED value */ @@ -255,7 +241,7 @@ static inline int phy_find_valid(int idx, u32 features) * duplexes. Drop down by one in this order: 1000/FULL, * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF */ -void phy_sanitize_settings(struct phy_device *phydev) +static void phy_sanitize_settings(struct phy_device *phydev) { u32 features = phydev->supported; int idx; @@ -270,7 +256,6 @@ void phy_sanitize_settings(struct phy_device *phydev) phydev->speed = settings[idx].speed; phydev->duplex = settings[idx].duplex; } -EXPORT_SYMBOL(phy_sanitize_settings); /* phy_force_reduction * @@ -477,48 +462,22 @@ void phy_error(struct phy_device *phydev) spin_unlock(&phydev->lock); } -#ifdef CONFIG_PHYCONTROL - -static void phy_change(void *data); - -/* phy_interrupt - * - * description: When a PHY interrupt occurs, the handler disables - * interrupts, and schedules a work task to clear the interrupt. - */ -static irqreturn_t phy_interrupt(int irq, void *phy_dat, struct pt_regs *regs) -{ - struct phy_device *phydev = phy_dat; - - /* The MDIO bus is not allowed to be written in interrupt - * context, so we need to disable the irq here. A work - * queue will write the PHY to disable and clear the - * interrupt, and then reenable the irq line. */ - disable_irq_nosync(irq); - - schedule_work(&phydev->phy_queue); - - return IRQ_HANDLED; -} - -/* Enable the interrupts from the PHY side */ -int phy_enable_interrupts(struct phy_device *phydev) +static int phy_stop_interrupts(struct phy_device *phydev) { int err; - err = phy_clear_interrupt(phydev); + err = phy_disable_interrupts(phydev); - if (err < 0) - return err; + if (err) + phy_error(phydev); - err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); + free_irq(phydev->irq, phydev); return err; } -EXPORT_SYMBOL(phy_enable_interrupts); /* Disable the PHY interrupts from the PHY side */ -int phy_disable_interrupts(struct phy_device *phydev) +static int phy_disable_interrupts(struct phy_device *phydev) { int err; @@ -541,140 +500,6 @@ phy_err: return err; } -EXPORT_SYMBOL(phy_disable_interrupts); - -/* phy_start_interrupts - * - * description: Request the interrupt for the given PHY. If - * this fails, then we set irq to PHY_POLL. - * Otherwise, we enable the interrupts in the PHY. - * Returns 0 on success. - * This should only be called with a valid IRQ number. - */ -int phy_start_interrupts(struct phy_device *phydev) -{ - int err = 0; - - INIT_WORK(&phydev->phy_queue, phy_change, phydev); - - if (request_irq(phydev->irq, phy_interrupt, - SA_SHIRQ, - "phy_interrupt", - phydev) < 0) { - printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n", - phydev->bus->name, - phydev->irq); - phydev->irq = PHY_POLL; - return 0; - } - - err = phy_enable_interrupts(phydev); - - return err; -} -EXPORT_SYMBOL(phy_start_interrupts); - -int phy_stop_interrupts(struct phy_device *phydev) -{ - int err; - - err = phy_disable_interrupts(phydev); - - if (err) - phy_error(phydev); - - free_irq(phydev->irq, phydev); - - return err; -} -EXPORT_SYMBOL(phy_stop_interrupts); - - -/* Scheduled by the phy_interrupt/timer to handle PHY changes */ -static void phy_change(void *data) -{ - int err; - struct phy_device *phydev = data; - - err = phy_disable_interrupts(phydev); - - if (err) - goto phy_err; - - spin_lock(&phydev->lock); - if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state)) - phydev->state = PHY_CHANGELINK; - spin_unlock(&phydev->lock); - - enable_irq(phydev->irq); - - /* Reenable interrupts */ - err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); - - if (err) - goto irq_enable_err; - - return; - -irq_enable_err: - disable_irq(phydev->irq); -phy_err: - phy_error(phydev); -} - -/* Bring down the PHY link, and stop checking the status. */ -void phy_stop(struct phy_device *phydev) -{ - spin_lock(&phydev->lock); - - if (PHY_HALTED == phydev->state) - goto out_unlock; - - if (phydev->irq != PHY_POLL) { - /* Clear any pending interrupts */ - phy_clear_interrupt(phydev); - - /* Disable PHY Interrupts */ - phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); - } - - phydev->state = PHY_HALTED; - -out_unlock: - spin_unlock(&phydev->lock); -} - - -/* phy_start - * - * description: Indicates the attached device's readiness to - * handle PHY-related work. Used during startup to start the - * PHY, and after a call to phy_stop() to resume operation. - * Also used to indicate the MDIO bus has cleared an error - * condition. - */ -void phy_start(struct phy_device *phydev) -{ - spin_lock(&phydev->lock); - - switch (phydev->state) { - case PHY_STARTING: - phydev->state = PHY_PENDING; - break; - case PHY_READY: - phydev->state = PHY_UP; - break; - case PHY_HALTED: - phydev->state = PHY_RESUMING; - default: - break; - } - spin_unlock(&phydev->lock); -} -EXPORT_SYMBOL(phy_stop); -EXPORT_SYMBOL(phy_start); - -#endif /* CONFIG_PHYCONTROL */ /* PHY timer which handles the state machine */ static void phy_timer(unsigned long data) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index c11138330fed..c44d54f6310a 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -124,133 +124,6 @@ void phy_prepare_link(struct phy_device *phydev, phydev->adjust_link = handler; } -#ifdef CONFIG_PHYCONTROL -/* phy_connect: - * - * description: Convenience function for connecting ethernet - * devices to PHY devices. The default behavior is for - * the PHY infrastructure to handle everything, and only notify - * the connected driver when the link status changes. If you - * don't want, or can't use the provided functionality, you may - * choose to call only the subset of functions which provide - * the desired functionality. - */ -struct phy_device * phy_connect(struct net_device *dev, const char *phy_id, - void (*handler)(struct net_device *), u32 flags) -{ - struct phy_device *phydev; - - phydev = phy_attach(dev, phy_id, flags); - - if (IS_ERR(phydev)) - return phydev; - - phy_prepare_link(phydev, handler); - - phy_start_machine(phydev, NULL); - - if (phydev->irq > 0) - phy_start_interrupts(phydev); - - return phydev; -} -EXPORT_SYMBOL(phy_connect); - -void phy_disconnect(struct phy_device *phydev) -{ - if (phydev->irq > 0) - phy_stop_interrupts(phydev); - - phy_stop_machine(phydev); - - phydev->adjust_link = NULL; - - phy_detach(phydev); -} -EXPORT_SYMBOL(phy_disconnect); - -#endif /* CONFIG_PHYCONTROL */ - -/* phy_attach: - * - * description: Called by drivers to attach to a particular PHY - * device. The phy_device is found, and properly hooked up - * to the phy_driver. If no driver is attached, then the - * genphy_driver is used. The phy_device is given a ptr to - * the attaching device, and given a callback for link status - * change. The phy_device is returned to the attaching - * driver. - */ -static int phy_compare_id(struct device *dev, void *data) -{ - return strcmp((char *)data, dev->bus_id) ? 0 : 1; -} - -struct phy_device *phy_attach(struct net_device *dev, - const char *phy_id, u32 flags) -{ - struct bus_type *bus = &mdio_bus_type; - struct phy_device *phydev; - struct device *d; - - /* Search the list of PHY devices on the mdio bus for the - * PHY with the requested name */ - d = bus_find_device(bus, NULL, (void *)phy_id, phy_compare_id); - - if (d) { - phydev = to_phy_device(d); - } else { - printk(KERN_ERR "%s not found\n", phy_id); - return ERR_PTR(-ENODEV); - } - - /* Assume that if there is no driver, that it doesn't - * exist, and we should use the genphy driver. */ - if (NULL == d->driver) { - int err; - down_write(&d->bus->subsys.rwsem); - d->driver = &genphy_driver.driver; - - err = d->driver->probe(d); - - if (err < 0) - return ERR_PTR(err); - - device_bind_driver(d); - up_write(&d->bus->subsys.rwsem); - } - - if (phydev->attached_dev) { - printk(KERN_ERR "%s: %s already attached\n", - dev->name, phy_id); - return ERR_PTR(-EBUSY); - } - - phydev->attached_dev = dev; - - phydev->dev_flags = flags; - - return phydev; -} -EXPORT_SYMBOL(phy_attach); - -void phy_detach(struct phy_device *phydev) -{ - phydev->attached_dev = NULL; - - /* If the device had no specific driver before (i.e. - it - * was using the generic driver), we unbind the device - * from the generic driver so that there's a chance a - * real driver could be loaded */ - if (phydev->dev.driver == &genphy_driver.driver) { - down_write(&phydev->dev.bus->subsys.rwsem); - device_release_driver(&phydev->dev); - up_write(&phydev->dev.bus->subsys.rwsem); - } -} -EXPORT_SYMBOL(phy_detach); - - /* Generic PHY support and helper functions */ /* genphy_config_advert @@ -259,7 +132,7 @@ EXPORT_SYMBOL(phy_detach); * after sanitizing the values to make sure we only advertise * what is supported */ -int genphy_config_advert(struct phy_device *phydev) +static int genphy_config_advert(struct phy_device *phydev) { u32 advertise; int adv; @@ -317,7 +190,6 @@ int genphy_config_advert(struct phy_device *phydev) return adv; } -EXPORT_SYMBOL(genphy_config_advert); /* genphy_setup_forced * -- cgit v1.2.1 From 972dcafb6d743a6c7611a2e4681ed814e30d6230 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Thu, 11 Aug 2005 03:35:53 -0400 Subject: [libata scsi] add START STOP UNIT translation --- drivers/scsi/libata-scsi.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 6a75ec2187fd..f58311b8c050 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -391,6 +391,60 @@ int ata_scsi_error(struct Scsi_Host *host) return 0; } +/** + * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command + * @qc: Storage for translated ATA taskfile + * @scsicmd: SCSI command to translate + * + * Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY + * (to start). Perhaps these commands should be preceded by + * CHECK POWER MODE to see what power mode the device is already in. + * [See SAT revision 5 at www.t10.org] + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Zero on success, non-zero on error. + */ + +static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, + u8 *scsicmd) +{ + struct ata_taskfile *tf = &qc->tf; + + tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; + tf->protocol = ATA_PROT_NODATA; + if (scsicmd[1] & 0x1) { + ; /* ignore IMMED bit, violates sat-r05 */ + } + if (scsicmd[4] & 0x2) + return 1; /* LOEJ bit set not supported */ + if (((scsicmd[4] >> 4) & 0xf) != 0) + return 1; /* power conditions not supported */ + if (scsicmd[4] & 0x1) { + tf->nsect = 1; /* 1 sector, lba=0 */ + tf->lbah = 0x0; + tf->lbam = 0x0; + tf->lbal = 0x0; + tf->device |= ATA_LBA; + tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ + } else { + tf->nsect = 0; /* time period value (0 implies now) */ + tf->command = ATA_CMD_STANDBY; + /* Consider: ATA STANDBY IMMEDIATE command */ + } + /* + * Standby and Idle condition timers could be implemented but that + * would require libata to implement the Power condition mode page + * and allow the user to change it. Changing mode pages requires + * MODE SELECT to be implemented. + */ + + return 0; +} + + /** * ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command * @qc: Storage for translated ATA taskfile @@ -1435,6 +1489,8 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) case VERIFY: case VERIFY_16: return ata_scsi_verify_xlat; + case START_STOP: + return ata_scsi_start_stop_xlat; } return NULL; -- cgit v1.2.1 From 9c15d24f2420c2155eccd32d7ab909a9c0e63c2b Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 11 Aug 2005 13:58:02 -0700 Subject: [PATCH] ixgb: Set RXDCTL:PTHRESH/HTHRESH to zero Set RXDCTL:PTHRESH/HTHRESH to zero Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/ixgb/ixgb_main.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index 097b90ccf575..492783be205e 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -145,10 +145,12 @@ MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); /* some defines for controlling descriptor fetches in h/w */ -#define RXDCTL_PTHRESH_DEFAULT 128 /* chip considers prefech below this */ -#define RXDCTL_HTHRESH_DEFAULT 16 /* chip will only prefetch if tail is - pushed this many descriptors from head */ #define RXDCTL_WTHRESH_DEFAULT 16 /* chip writes back at this many or RXT0 */ +#define RXDCTL_PTHRESH_DEFAULT 0 /* chip considers prefech below + * this */ +#define RXDCTL_HTHRESH_DEFAULT 0 /* chip will only prefetch if tail + * is pushed this many descriptors + * from head */ /** * ixgb_init_module - Driver Registration Routine -- cgit v1.2.1 From 51b54b512cd26c4477ccd57b8d3736b99ccef7a0 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 11 Aug 2005 13:58:23 -0700 Subject: [PATCH] ixgb: Fix unnecessary link state messages Fix unnecessary link state messages Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/ixgb/ixgb_ethtool.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index 3fa113854eeb..94bc3d41cfa3 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -130,6 +130,12 @@ ixgb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ixgb_down(adapter, TRUE); ixgb_reset(adapter); ixgb_up(adapter); + /* be optimistic about our link, since we were up before */ + adapter->link_speed = 10000; + adapter->link_duplex = FULL_DUPLEX; + netif_carrier_on(netdev); + netif_wake_queue(netdev); + } else ixgb_reset(adapter); @@ -177,6 +183,11 @@ ixgb_set_pauseparam(struct net_device *netdev, if(netif_running(adapter->netdev)) { ixgb_down(adapter, TRUE); ixgb_up(adapter); + /* be optimistic about our link, since we were up before */ + adapter->link_speed = 10000; + adapter->link_duplex = FULL_DUPLEX; + netif_carrier_on(netdev); + netif_wake_queue(netdev); } else ixgb_reset(adapter); @@ -199,6 +210,11 @@ ixgb_set_rx_csum(struct net_device *netdev, uint32_t data) if(netif_running(netdev)) { ixgb_down(adapter,TRUE); ixgb_up(adapter); + /* be optimistic about our link, since we were up before */ + adapter->link_speed = 10000; + adapter->link_duplex = FULL_DUPLEX; + netif_carrier_on(netdev); + netif_wake_queue(netdev); } else ixgb_reset(adapter); return 0; @@ -573,6 +589,11 @@ ixgb_set_ringparam(struct net_device *netdev, adapter->tx_ring = tx_new; if((err = ixgb_up(adapter))) return err; + /* be optimistic about our link, since we were up before */ + adapter->link_speed = 10000; + adapter->link_duplex = FULL_DUPLEX; + netif_carrier_on(netdev); + netif_wake_queue(netdev); } return 0; -- cgit v1.2.1 From 8908c6cd1d6889850148aeb50bb14301959adaa7 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 11 Aug 2005 13:58:40 -0700 Subject: [PATCH] ixgb: Use netdev_priv() instead of netdev->priv Use netdev_priv() instead of netdev->priv Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/ixgb/ixgb_ethtool.c | 30 ++++++++++++++++-------------- drivers/net/ixgb/ixgb_main.c | 32 ++++++++++++++++---------------- 2 files changed, 32 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index 94bc3d41cfa3..c80fa0007904 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -98,7 +98,7 @@ static struct ixgb_stats ixgb_gstrings_stats[] = { static int ixgb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE); ecmd->advertising = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE); @@ -120,7 +120,7 @@ ixgb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) static int ixgb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); if(ecmd->autoneg == AUTONEG_ENABLE || ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL) @@ -146,7 +146,7 @@ static void ixgb_get_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); struct ixgb_hw *hw = &adapter->hw; pause->autoneg = AUTONEG_DISABLE; @@ -165,7 +165,7 @@ static int ixgb_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); struct ixgb_hw *hw = &adapter->hw; if(pause->autoneg == AUTONEG_ENABLE) @@ -197,14 +197,16 @@ ixgb_set_pauseparam(struct net_device *netdev, static uint32_t ixgb_get_rx_csum(struct net_device *netdev) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); + return adapter->rx_csum; } static int ixgb_set_rx_csum(struct net_device *netdev, uint32_t data) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); + adapter->rx_csum = data; if(netif_running(netdev)) { @@ -262,7 +264,7 @@ static void ixgb_get_regs(struct net_device *netdev, struct ethtool_regs *regs, void *p) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); struct ixgb_hw *hw = &adapter->hw; uint32_t *reg = p; uint32_t *reg_start = reg; @@ -407,7 +409,7 @@ static int ixgb_get_eeprom(struct net_device *netdev, struct ethtool_eeprom *eeprom, uint8_t *bytes) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); struct ixgb_hw *hw = &adapter->hw; uint16_t *eeprom_buff; int i, max_len, first_word, last_word; @@ -455,7 +457,7 @@ static int ixgb_set_eeprom(struct net_device *netdev, struct ethtool_eeprom *eeprom, uint8_t *bytes) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); struct ixgb_hw *hw = &adapter->hw; uint16_t *eeprom_buff; void *ptr; @@ -513,7 +515,7 @@ static void ixgb_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); strncpy(drvinfo->driver, ixgb_driver_name, 32); strncpy(drvinfo->version, ixgb_driver_version, 32); @@ -528,7 +530,7 @@ static void ixgb_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); struct ixgb_desc_ring *txdr = &adapter->tx_ring; struct ixgb_desc_ring *rxdr = &adapter->rx_ring; @@ -546,7 +548,7 @@ static int ixgb_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); struct ixgb_desc_ring *txdr = &adapter->tx_ring; struct ixgb_desc_ring *rxdr = &adapter->rx_ring; struct ixgb_desc_ring tx_old, tx_new, rx_old, rx_new; @@ -628,7 +630,7 @@ ixgb_led_blink_callback(unsigned long data) static int ixgb_phys_id(struct net_device *netdev, uint32_t data) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); if(!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ)) data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ); @@ -664,7 +666,7 @@ static void ixgb_get_ethtool_stats(struct net_device *netdev, struct ethtool_stats *stats, uint64_t *data) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); int i; ixgb_update_stats(adapter); diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index 492783be205e..d1fc431cb1c9 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -378,7 +378,7 @@ ixgb_probe(struct pci_dev *pdev, SET_NETDEV_DEV(netdev, &pdev->dev); pci_set_drvdata(pdev, netdev); - adapter = netdev->priv; + adapter = netdev_priv(netdev); adapter->netdev = netdev; adapter->pdev = pdev; adapter->hw.back = adapter; @@ -514,7 +514,7 @@ static void __devexit ixgb_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); unregister_netdev(netdev); @@ -585,7 +585,7 @@ ixgb_sw_init(struct ixgb_adapter *adapter) static int ixgb_open(struct net_device *netdev) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); int err; /* allocate transmit descriptors */ @@ -628,7 +628,7 @@ err_setup_tx: static int ixgb_close(struct net_device *netdev) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); ixgb_down(adapter, TRUE); @@ -1019,7 +1019,7 @@ ixgb_clean_rx_ring(struct ixgb_adapter *adapter) static int ixgb_set_mac(struct net_device *netdev, void *p) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); struct sockaddr *addr = p; if(!is_valid_ether_addr(addr->sa_data)) @@ -1045,7 +1045,7 @@ ixgb_set_mac(struct net_device *netdev, void *p) static void ixgb_set_multi(struct net_device *netdev) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); struct ixgb_hw *hw = &adapter->hw; struct dev_mc_list *mc_ptr; uint32_t rctl; @@ -1373,7 +1373,7 @@ ixgb_tx_queue(struct ixgb_adapter *adapter, int count, int vlan_id,int tx_flags) static int ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); unsigned int first; unsigned int tx_flags = 0; unsigned long flags; @@ -1427,7 +1427,7 @@ ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev) static void ixgb_tx_timeout(struct net_device *netdev) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); /* Do the reset outside of interrupt context */ schedule_work(&adapter->tx_timeout_task); @@ -1436,7 +1436,7 @@ ixgb_tx_timeout(struct net_device *netdev) static void ixgb_tx_timeout_task(struct net_device *netdev) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); ixgb_down(adapter, TRUE); ixgb_up(adapter); @@ -1453,7 +1453,7 @@ ixgb_tx_timeout_task(struct net_device *netdev) static struct net_device_stats * ixgb_get_stats(struct net_device *netdev) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); return &adapter->net_stats; } @@ -1469,7 +1469,7 @@ ixgb_get_stats(struct net_device *netdev) static int ixgb_change_mtu(struct net_device *netdev, int new_mtu) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); int max_frame = new_mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH; int old_max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH; @@ -1643,7 +1643,7 @@ static irqreturn_t ixgb_intr(int irq, void *data, struct pt_regs *regs) { struct net_device *netdev = data; - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); struct ixgb_hw *hw = &adapter->hw; uint32_t icr = IXGB_READ_REG(hw, ICR); #ifndef CONFIG_IXGB_NAPI @@ -1690,7 +1690,7 @@ ixgb_intr(int irq, void *data, struct pt_regs *regs) static int ixgb_clean(struct net_device *netdev, int *budget) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); int work_to_do = min(*budget, netdev->quota); int tx_cleaned; int work_done = 0; @@ -2019,7 +2019,7 @@ ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter) static void ixgb_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); uint32_t ctrl, rctl; ixgb_irq_disable(adapter); @@ -2057,7 +2057,7 @@ ixgb_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) static void ixgb_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); uint32_t vfta, index; /* add VID to filter table */ @@ -2071,7 +2071,7 @@ ixgb_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid) static void ixgb_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid) { - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); uint32_t vfta, index; ixgb_irq_disable(adapter); -- cgit v1.2.1 From 7b89178d1d803c854dfd6f4e81633109a1238884 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 11 Aug 2005 13:58:55 -0700 Subject: [PATCH] ixgb: Fix Broadcast/Multicast packets received statistics Fix Broadcast/Multicast packets received statistics Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/ixgb/ixgb_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index d1fc431cb1c9..d7a0f4e36118 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -1524,7 +1524,8 @@ ixgb_update_stats(struct ixgb_adapter *adapter) multi |= ((u64)IXGB_READ_REG(&adapter->hw, MPRCH) << 32); /* fix up multicast stats by removing broadcasts */ - multi -= bcast; + if(multi >= bcast) + multi -= bcast; adapter->stats.mprcl += (multi & 0xFFFFFFFF); adapter->stats.mprch += (multi >> 32); -- cgit v1.2.1 From 9ef2eec39383f8fe2bd7c9fac4dfdd4fdf7173e6 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 11 Aug 2005 13:59:07 -0700 Subject: [PATCH] ixgb: Fix data output by ethtool -d Fix data output by ethtool -d Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/ixgb/ixgb_ethtool.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index c80fa0007904..44a07a9dcbc1 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -301,7 +301,8 @@ ixgb_get_regs(struct net_device *netdev, *reg++ = IXGB_READ_REG(hw, RAIDC); /* 19 */ *reg++ = IXGB_READ_REG(hw, RXCSUM); /* 20 */ - for (i = 0; i < IXGB_RAR_ENTRIES; i++) { + /* there are 16 RAR entries in hardware, we only use 3 */ + for(i = 0; i < 16; i++) { *reg++ = IXGB_READ_REG_ARRAY(hw, RAL, (i << 1)); /*21,...,51 */ *reg++ = IXGB_READ_REG_ARRAY(hw, RAH, (i << 1)); /*22,...,52 */ } -- cgit v1.2.1 From db0bacaa8313e00bb571e2d1102dc9f567353a24 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 11 Aug 2005 13:59:20 -0700 Subject: [PATCH] ixgb: Ethtool cleanup patch from Stephen Hemminger Ethtool cleanup patch from Stephen Hemminger * use ADVERTISED_xxx fields when setting advertised fields Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/ixgb/ixgb_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index 44a07a9dcbc1..762e3a0e92b0 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -101,7 +101,7 @@ ixgb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) struct ixgb_adapter *adapter = netdev_priv(netdev); ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE); - ecmd->advertising = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE); + ecmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE); ecmd->port = PORT_FIBRE; ecmd->transceiver = XCVR_EXTERNAL; -- cgit v1.2.1 From fcb01756e8e95e8d4e423377bc435e8856194328 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 11 Aug 2005 13:59:31 -0700 Subject: [PATCH] ixgb: Remove unused functions Remove unused functions, render some variable static instead of global - based on patch from Adrian Bunk Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/ixgb/ixgb_ee.c | 170 +-------------------------------------------- drivers/net/ixgb/ixgb_hw.h | 9 --- 2 files changed, 1 insertion(+), 178 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ixgb/ixgb_ee.c b/drivers/net/ixgb/ixgb_ee.c index 3aae110c5560..661a46b95a61 100644 --- a/drivers/net/ixgb/ixgb_ee.c +++ b/drivers/net/ixgb/ixgb_ee.c @@ -565,24 +565,6 @@ ixgb_get_ee_mac_addr(struct ixgb_hw *hw, } } -/****************************************************************************** - * return the compatibility flags from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * compatibility flags if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint16_t -ixgb_get_ee_compatibility(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; - - if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return (le16_to_cpu(ee_map->compatibility)); - - return(0); -} /****************************************************************************** * return the Printed Board Assembly number from EEPROM @@ -602,81 +584,6 @@ ixgb_get_ee_pba_number(struct ixgb_hw *hw) return(0); } -/****************************************************************************** - * return the Initialization Control Word 1 from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * Initialization Control Word 1 if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint16_t -ixgb_get_ee_init_ctrl_reg_1(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; - - if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return (le16_to_cpu(ee_map->init_ctrl_reg_1)); - - return(0); -} - -/****************************************************************************** - * return the Initialization Control Word 2 from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * Initialization Control Word 2 if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint16_t -ixgb_get_ee_init_ctrl_reg_2(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; - - if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return (le16_to_cpu(ee_map->init_ctrl_reg_2)); - - return(0); -} - -/****************************************************************************** - * return the Subsystem Id from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * Subsystem Id if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint16_t -ixgb_get_ee_subsystem_id(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; - - if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return (le16_to_cpu(ee_map->subsystem_id)); - - return(0); -} - -/****************************************************************************** - * return the Sub Vendor Id from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * Sub Vendor Id if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint16_t -ixgb_get_ee_subvendor_id(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; - - if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return (le16_to_cpu(ee_map->subvendor_id)); - - return(0); -} /****************************************************************************** * return the Device Id from EEPROM @@ -694,81 +601,6 @@ ixgb_get_ee_device_id(struct ixgb_hw *hw) if(ixgb_check_and_get_eeprom_data(hw) == TRUE) return (le16_to_cpu(ee_map->device_id)); - return(0); -} - -/****************************************************************************** - * return the Vendor Id from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * Device Id if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint16_t -ixgb_get_ee_vendor_id(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; - - if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return (le16_to_cpu(ee_map->vendor_id)); - - return(0); -} - -/****************************************************************************** - * return the Software Defined Pins Register from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * SDP Register if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint16_t -ixgb_get_ee_swdpins_reg(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; - - if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return (le16_to_cpu(ee_map->swdpins_reg)); - - return(0); + return (0); } -/****************************************************************************** - * return the D3 Power Management Bits from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * D3 Power Management Bits if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint8_t -ixgb_get_ee_d3_power(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; - - if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return (le16_to_cpu(ee_map->d3_power)); - - return(0); -} - -/****************************************************************************** - * return the D0 Power Management Bits from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * D0 Power Management Bits if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint8_t -ixgb_get_ee_d0_power(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; - - if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return (le16_to_cpu(ee_map->d0_power)); - - return(0); -} diff --git a/drivers/net/ixgb/ixgb_hw.h b/drivers/net/ixgb/ixgb_hw.h index 97898efe7cc8..8bcf31ed10c2 100644 --- a/drivers/net/ixgb/ixgb_hw.h +++ b/drivers/net/ixgb/ixgb_hw.h @@ -822,17 +822,8 @@ extern void ixgb_clear_vfta(struct ixgb_hw *hw); /* Access functions to eeprom data */ void ixgb_get_ee_mac_addr(struct ixgb_hw *hw, uint8_t *mac_addr); -uint16_t ixgb_get_ee_compatibility(struct ixgb_hw *hw); uint32_t ixgb_get_ee_pba_number(struct ixgb_hw *hw); -uint16_t ixgb_get_ee_init_ctrl_reg_1(struct ixgb_hw *hw); -uint16_t ixgb_get_ee_init_ctrl_reg_2(struct ixgb_hw *hw); -uint16_t ixgb_get_ee_subsystem_id(struct ixgb_hw *hw); -uint16_t ixgb_get_ee_subvendor_id(struct ixgb_hw *hw); uint16_t ixgb_get_ee_device_id(struct ixgb_hw *hw); -uint16_t ixgb_get_ee_vendor_id(struct ixgb_hw *hw); -uint16_t ixgb_get_ee_swdpins_reg(struct ixgb_hw *hw); -uint8_t ixgb_get_ee_d3_power(struct ixgb_hw *hw); -uint8_t ixgb_get_ee_d0_power(struct ixgb_hw *hw); boolean_t ixgb_get_eeprom_data(struct ixgb_hw *hw); uint16_t ixgb_get_eeprom_word(struct ixgb_hw *hw, uint16_t index); -- cgit v1.2.1 From b40a1f06c062d5fb2dc11fcb826d97b28918524f Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 11 Aug 2005 13:59:44 -0700 Subject: [PATCH] ixgb: Redefined buffer_info-dma to be dma_addr_t instead of uint64 Redefined buffer_info-dma to be dma_addr_t instead of uint64 Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/ixgb/ixgb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h index f8d3385c7842..c83271b38621 100644 --- a/drivers/net/ixgb/ixgb.h +++ b/drivers/net/ixgb/ixgb.h @@ -119,7 +119,7 @@ struct ixgb_adapter; * so a DMA handle can be stored along with the buffer */ struct ixgb_buffer { struct sk_buff *skb; - uint64_t dma; + dma_addr_t dma; unsigned long time_stamp; uint16_t length; uint16_t next_to_watch; -- cgit v1.2.1 From ab707da7cf0a1a1d27c6021356cfb3692cf1bd26 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 11 Aug 2005 13:59:59 -0700 Subject: [PATCH] ixgb: Driver version, white space, comments Driver version, white space, comments & added Module_version Patch from linville Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/ixgb/ixgb_ethtool.c | 3 ++- drivers/net/ixgb/ixgb_main.c | 10 +++++++--- 2 files changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index 762e3a0e92b0..9d026ed77ddd 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -271,7 +271,8 @@ ixgb_get_regs(struct net_device *netdev, uint8_t i; /* the 1 (one) below indicates an attempt at versioning, if the - * interface in ethtool or the driver this 1 should be incremented */ + * interface in ethtool or the driver changes, this 1 should be + * incremented */ regs->version = (1<<24) | hw->revision_id << 16 | hw->device_id; /* General Registers */ diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index d7a0f4e36118..5c555373adbe 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -29,6 +29,11 @@ #include "ixgb.h" /* Change Log + * 1.0.96 04/19/05 + * - Make needlessly global code static -- bunk@stusta.de + * - ethtool cleanup -- shemminger@osdl.org + * - Support for MODULE_VERSION -- linville@tuxdriver.com + * - add skb_header_cloned check to the tso path -- herbert@apana.org.au * 1.0.88 01/05/05 * - include fix to the condition that determines when to quit NAPI - Robert Olsson * - use netif_poll_{disable/enable} to synchronize between NAPI and i/f up/down @@ -47,10 +52,9 @@ char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif - -#define DRV_VERSION "1.0.95-k2"DRIVERNAPI +#define DRV_VERSION "1.0.100-k2"DRIVERNAPI char ixgb_driver_version[] = DRV_VERSION; -char ixgb_copyright[] = "Copyright (c) 1999-2005 Intel Corporation."; +static char ixgb_copyright[] = "Copyright (c) 1999-2005 Intel Corporation."; /* ixgb_pci_tbl - PCI Device ID Table * -- cgit v1.2.1 From 6ae4cfb5711b6f2878c9e384617971d98c34a7f5 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Fri, 12 Aug 2005 14:15:34 +0800 Subject: [PATCH] libata ata_data_xfer() fix PATCH 1/2: ata_data_xfer() fix Changes: - Modify ata_mmio_data_xfer() and ata_pio_data_xfer() to handle odd-lengthed buffer. - Add some function comments This patch does not reuse ap->pad as alignment buffer since using local variable seems good enough. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 111 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 108 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 73b1f72b7e43..8f6e536d8924 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2519,6 +2519,20 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) #endif /* __BIG_ENDIAN */ } +/** + * ata_mmio_data_xfer - Transfer data by MMIO + * @ap: port to read/write + * @buf: data buffer + * @buflen: buffer length + * @do_write: read/write + * + * Transfer data from/to the device data register by MMIO. + * + * LOCKING: + * Inherited from caller. + * + */ + static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, unsigned int buflen, int write_data) { @@ -2527,6 +2541,7 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, u16 *buf16 = (u16 *) buf; void __iomem *mmio = (void __iomem *)ap->ioaddr.data_addr; + /* Transfer multiple of 2 bytes */ if (write_data) { for (i = 0; i < words; i++) writew(le16_to_cpu(buf16[i]), mmio); @@ -2534,19 +2549,76 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, for (i = 0; i < words; i++) buf16[i] = cpu_to_le16(readw(mmio)); } + + /* Transfer trailing 1 byte, if any. */ + if (unlikely(buflen & 0x01)) { + u16 align_buf[1] = { 0 }; + unsigned char *trailing_buf = buf + buflen - 1; + + if (write_data) { + memcpy(align_buf, trailing_buf, 1); + writew(le16_to_cpu(align_buf[0]), mmio); + } else { + align_buf[0] = cpu_to_le16(readw(mmio)); + memcpy(trailing_buf, align_buf, 1); + } + } } +/** + * ata_pio_data_xfer - Transfer data by PIO + * @ap: port to read/write + * @buf: data buffer + * @buflen: buffer length + * @do_write: read/write + * + * Transfer data from/to the device data register by PIO. + * + * LOCKING: + * Inherited from caller. + * + */ + static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf, unsigned int buflen, int write_data) { - unsigned int dwords = buflen >> 1; + unsigned int words = buflen >> 1; + /* Transfer multiple of 2 bytes */ if (write_data) - outsw(ap->ioaddr.data_addr, buf, dwords); + outsw(ap->ioaddr.data_addr, buf, words); else - insw(ap->ioaddr.data_addr, buf, dwords); + insw(ap->ioaddr.data_addr, buf, words); + + /* Transfer trailing 1 byte, if any. */ + if (unlikely(buflen & 0x01)) { + u16 align_buf[1] = { 0 }; + unsigned char *trailing_buf = buf + buflen - 1; + + if (write_data) { + memcpy(align_buf, trailing_buf, 1); + outw(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr); + } else { + align_buf[0] = cpu_to_le16(inw(ap->ioaddr.data_addr)); + memcpy(trailing_buf, align_buf, 1); + } + } } +/** + * ata_data_xfer - Transfer data from/to the data register. + * @ap: port to read/write + * @buf: data buffer + * @buflen: buffer length + * @do_write: read/write + * + * Transfer data from/to the device data register. + * + * LOCKING: + * Inherited from caller. + * + */ + static void ata_data_xfer(struct ata_port *ap, unsigned char *buf, unsigned int buflen, int do_write) { @@ -2556,6 +2628,16 @@ static void ata_data_xfer(struct ata_port *ap, unsigned char *buf, ata_pio_data_xfer(ap, buf, buflen, do_write); } +/** + * ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data. + * @qc: Command on going + * + * Transfer ATA_SECT_SIZE of data from/to the ATA device. + * + * LOCKING: + * Inherited from caller. + */ + static void ata_pio_sector(struct ata_queued_cmd *qc) { int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); @@ -2594,6 +2676,18 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) kunmap(page); } +/** + * __atapi_pio_bytes - Transfer data from/to the ATAPI device. + * @qc: Command on going + * @bytes: number of bytes + * + * Transfer Transfer data from/to the ATAPI device. + * + * LOCKING: + * Inherited from caller. + * + */ + static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) { int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); @@ -2645,6 +2739,17 @@ next_sg: } } +/** + * atapi_pio_bytes - Transfer data from/to the ATAPI device. + * @qc: Command on going + * + * Transfer Transfer data from/to the ATAPI device. + * + * LOCKING: + * Inherited from caller. + * + */ + static void atapi_pio_bytes(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; -- cgit v1.2.1 From 563a6e1fb0af58433beec1ab418e1fafbd100b56 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Fri, 12 Aug 2005 14:17:50 +0800 Subject: [PATCH] libata handle the case when device returns/needs extra data PATCH 2/2: handle the case when device returns/needs extra data Description: Sometimes the device returns/needs extra data than expected. Changes: Modify __atapi_pio_bytes() to handle the case where device returns/needs extra data. - for read case, discard trailing data from the device - for write case, padding zero data to the device Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 28 +++++++++++++++++++++++++--- 1 file changed, 25 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 8f6e536d8924..9add4c521b6b 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2697,10 +2697,33 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) unsigned char *buf; unsigned int offset, count; - if (qc->curbytes == qc->nbytes - bytes) + if (qc->curbytes + bytes >= qc->nbytes) ap->pio_task_state = PIO_ST_LAST; next_sg: + if (unlikely(qc->cursg >= qc->n_elem)) { + /* + * The end of qc->sg is reached and the device expects + * more data to transfer. In order not to overrun qc->sg + * and fulfill length specified in the byte count register, + * - for read case, discard trailing data from the device + * - for write case, padding zero data to the device + */ + u16 pad_buf[1] = { 0 }; + unsigned int words = bytes >> 1; + unsigned int i; + + if (words) /* warning if bytes > 1 */ + printk(KERN_WARNING "ata%u: %u bytes trailing data\n", + ap->id, bytes); + + for (i = 0; i < words; i++) + ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write); + + ap->pio_task_state = PIO_ST_LAST; + return; + } + sg = &qc->sg[qc->cursg]; page = sg->page; @@ -2734,9 +2757,8 @@ next_sg: kunmap(page); - if (bytes) { + if (bytes) goto next_sg; - } } /** -- cgit v1.2.1 From 050ec18a35f3106437da8e9c55e441c076c7b93e Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 16 Aug 2005 14:00:54 -0700 Subject: [PATCH] skge: stop bogus sensor messages Some versions of the Marvell yukon generate bogus sensor warning interrupts. The driver would flood log with these messages. Handle this situation cleanly by masking away at boot time. Fixes: http://bugs.gentoo.org/show_bug.cgi?id=87182 Signed-off-by: Stephen Hemminger drivers/net/skge.c | 24 ++++++++++-------------- drivers/net/skge.h | 8 ++++++-- 2 files changed, 16 insertions(+), 16 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 24 ++++++++++-------------- drivers/net/skge.h | 8 ++++++-- 2 files changed, 16 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/skge.c b/drivers/net/skge.c index f15739481d62..9ff1261f07ca 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -2670,18 +2670,6 @@ static void skge_error_irq(struct skge_hw *hw) /* Timestamp (unused) overflow */ if (hwstatus & IS_IRQ_TIST_OV) skge_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ); - - if (hwstatus & IS_IRQ_SENSOR) { - /* no sensors on 32-bit Yukon */ - if (!(skge_read16(hw, B0_CTST) & CS_BUS_SLOT_SZ)) { - printk(KERN_ERR PFX "ignoring bogus sensor interrups\n"); - skge_write32(hw, B0_HWE_IMSK, - IS_ERR_MSK & ~IS_IRQ_SENSOR); - } else - printk(KERN_WARNING PFX "sensor interrupt\n"); - } - - } if (hwstatus & IS_RAM_RD_PAR) { @@ -2712,9 +2700,10 @@ static void skge_error_irq(struct skge_hw *hw) skge_pci_clear(hw); + /* if error still set then just ignore it */ hwstatus = skge_read32(hw, B0_HWE_ISRC); if (hwstatus & IS_IRQ_STAT) { - printk(KERN_WARNING PFX "IRQ status %x: still set ignoring hardware errors\n", + pr_debug("IRQ status %x: still set ignoring hardware errors\n", hwstatus); hw->intr_mask &= ~IS_HW_ERR; } @@ -2948,12 +2937,20 @@ static int skge_reset(struct skge_hw *hw) else hw->ram_size = t8 * 4096; + hw->intr_mask = IS_HW_ERR | IS_EXT_REG; if (hw->chip_id == CHIP_ID_GENESIS) genesis_init(hw); else { /* switch power to VCC (WA for VAUX problem) */ skge_write8(hw, B0_POWER_CTRL, PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON); + /* avoid boards with stuck Hardware error bits */ + if ((skge_read32(hw, B0_ISRC) & IS_HW_ERR) && + (skge_read32(hw, B0_HWE_ISRC) & IS_IRQ_SENSOR)) { + printk(KERN_WARNING PFX "stuck hardware sensor bit\n"); + hw->intr_mask &= ~IS_HW_ERR; + } + for (i = 0; i < hw->ports; i++) { skge_write16(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET); skge_write16(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR); @@ -2994,7 +2991,6 @@ static int skge_reset(struct skge_hw *hw) skge_write32(hw, B2_IRQM_INI, skge_usecs2clk(hw, 100)); skge_write32(hw, B2_IRQM_CTRL, TIM_START); - hw->intr_mask = IS_HW_ERR | IS_EXT_REG; skge_write32(hw, B0_IMSK, hw->intr_mask); if (hw->chip_id != CHIP_ID_GENESIS) diff --git a/drivers/net/skge.h b/drivers/net/skge.h index b432f1bb8168..636729fcbbaa 100644 --- a/drivers/net/skge.h +++ b/drivers/net/skge.h @@ -214,8 +214,6 @@ enum { /* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */ enum { - IS_ERR_MSK = 0x00003fff,/* All Error bits */ - IS_IRQ_TIST_OV = 1<<13, /* Time Stamp Timer Overflow (YUKON only) */ IS_IRQ_SENSOR = 1<<12, /* IRQ from Sensor (YUKON only) */ IS_IRQ_MST_ERR = 1<<11, /* IRQ master error detected */ @@ -230,6 +228,12 @@ enum { IS_M2_PAR_ERR = 1<<2, /* MAC 2 Parity Error */ IS_R1_PAR_ERR = 1<<1, /* Queue R1 Parity Error */ IS_R2_PAR_ERR = 1<<0, /* Queue R2 Parity Error */ + + IS_ERR_MSK = IS_IRQ_MST_ERR | IS_IRQ_STAT + | IS_NO_STAT_M1 | IS_NO_STAT_M2 + | IS_RAM_RD_PAR | IS_RAM_WR_PAR + | IS_M1_PAR_ERR | IS_M2_PAR_ERR + | IS_R1_PAR_ERR | IS_R2_PAR_ERR, }; /* B2_TST_CTRL1 8 bit Test Control Register 1 */ -- cgit v1.2.1 From 5e1705ddc83f77da4b29a6d687da14e971912e41 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 16 Aug 2005 14:00:58 -0700 Subject: [PATCH] skge: fibre vs copper detection cleanup Cleanup the code that handles fibre vs copper detection. Signed-off-by: Stephen Hemminger drivers/net/skge.c | 26 ++++++++++++-------------- drivers/net/skge.h | 11 ++--------- 2 files changed, 14 insertions(+), 23 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 26 ++++++++++++-------------- drivers/net/skge.h | 11 ++--------- 2 files changed, 14 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 9ff1261f07ca..3990829d3c46 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -189,7 +189,7 @@ static u32 skge_supported_modes(const struct skge_hw *hw) { u32 supported; - if (iscopper(hw)) { + if (hw->copper) { supported = SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half @@ -222,7 +222,7 @@ static int skge_get_settings(struct net_device *dev, ecmd->transceiver = XCVR_INTERNAL; ecmd->supported = skge_supported_modes(hw); - if (iscopper(hw)) { + if (hw->copper) { ecmd->port = PORT_TP; ecmd->phy_address = hw->phy_addr; } else @@ -1599,7 +1599,7 @@ static void yukon_init(struct skge_hw *hw, int port) adv = PHY_AN_CSMA; if (skge->autoneg == AUTONEG_ENABLE) { - if (iscopper(hw)) { + if (hw->copper) { if (skge->advertising & ADVERTISED_1000baseT_Full) ct1000 |= PHY_M_1000C_AFD; if (skge->advertising & ADVERTISED_1000baseT_Half) @@ -1691,7 +1691,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port) /* Set hardware config mode */ reg = GPC_INT_POL_HI | GPC_DIS_FC | GPC_DIS_SLEEP | GPC_ENA_XC | GPC_ANEG_ADV_ALL_M | GPC_ENA_PAUSE; - reg |= iscopper(hw) ? GPC_HWCFG_GMII_COP : GPC_HWCFG_GMII_FIB; + reg |= hw->copper ? GPC_HWCFG_GMII_COP : GPC_HWCFG_GMII_FIB; /* Clear GMC reset */ skge_write32(hw, SK_REG(port, GPHY_CTRL), reg | GPC_RST_SET); @@ -2865,7 +2865,7 @@ static const char *skge_board_name(const struct skge_hw *hw) static int skge_reset(struct skge_hw *hw) { u16 ctst; - u8 t8, mac_cfg; + u8 t8, mac_cfg, pmd_type, phy_type; int i; ctst = skge_read16(hw, B0_CTST); @@ -2884,18 +2884,19 @@ static int skge_reset(struct skge_hw *hw) ctst & (CS_CLK_RUN_HOT|CS_CLK_RUN_RST|CS_CLK_RUN_ENA)); hw->chip_id = skge_read8(hw, B2_CHIP_ID); - hw->phy_type = skge_read8(hw, B2_E_1) & 0xf; - hw->pmd_type = skge_read8(hw, B2_PMD_TYP); + phy_type = skge_read8(hw, B2_E_1) & 0xf; + pmd_type = skge_read8(hw, B2_PMD_TYP); + hw->copper = (pmd_type == 'T' || pmd_type == '1'); switch (hw->chip_id) { case CHIP_ID_GENESIS: - switch (hw->phy_type) { + switch (phy_type) { case SK_PHY_BCOM: hw->phy_addr = PHY_ADDR_BCOM; break; default: printk(KERN_ERR PFX "%s: unsupported phy type 0x%x\n", - pci_name(hw->pdev), hw->phy_type); + pci_name(hw->pdev), phy_type); return -EOPNOTSUPP; } break; @@ -2903,13 +2904,10 @@ static int skge_reset(struct skge_hw *hw) case CHIP_ID_YUKON: case CHIP_ID_YUKON_LITE: case CHIP_ID_YUKON_LP: - if (hw->phy_type < SK_PHY_MARV_COPPER && hw->pmd_type != 'S') - hw->phy_type = SK_PHY_MARV_COPPER; + if (phy_type < SK_PHY_MARV_COPPER && pmd_type != 'S') + hw->copper = 1; hw->phy_addr = PHY_ADDR_MARV; - if (!iscopper(hw)) - hw->phy_type = SK_PHY_MARV_FIBER; - break; default: diff --git a/drivers/net/skge.h b/drivers/net/skge.h index 636729fcbbaa..f1680beb8e68 100644 --- a/drivers/net/skge.h +++ b/drivers/net/skge.h @@ -2460,24 +2460,17 @@ struct skge_hw { u8 chip_id; u8 chip_rev; - u8 phy_type; - u8 pmd_type; - u16 phy_addr; + u8 copper; u8 ports; u32 ram_size; u32 ram_offset; + u16 phy_addr; struct tasklet_struct ext_tasklet; spinlock_t phy_lock; }; - -static inline int iscopper(const struct skge_hw *hw) -{ - return (hw->pmd_type == 'T'); -} - enum { FLOW_MODE_NONE = 0, /* No Flow-Control */ FLOW_MODE_LOC_SEND = 1, /* Local station sends PAUSE */ -- cgit v1.2.1 From c59230818f7a8969c2f9d3b601745679127a4016 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 16 Aug 2005 14:01:02 -0700 Subject: [PATCH] skge: increase receive flush threshold default The flush threshold in the MAC chip should be increased. Found while reviewing vendor version of sk98lin driver. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 3990829d3c46..38fc66a1e14c 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -1780,7 +1780,12 @@ static void yukon_mac_init(struct skge_hw *hw, int port) reg &= ~GMF_RX_F_FL_ON; skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); skge_write16(hw, SK_REG(port, RX_GMF_CTRL_T), reg); - skge_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF); + /* + * because Pause Packet Truncation in GMAC is not working + * we have to increase the Flush Threshold to 64 bytes + * in order to flush pause packets in Rx FIFO on Yukon-1 + */ + skge_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF+1); /* Configure Tx MAC FIFO */ skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); -- cgit v1.2.1 From 54cfb5aa0f4859bd38706eabe0118175780a542f Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 16 Aug 2005 14:01:05 -0700 Subject: [PATCH] skge: turn on link status LED Turn on the link status LED when link comes up. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 38fc66a1e14c..48a43b84ea5f 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -42,7 +42,7 @@ #include "skge.h" #define DRV_NAME "skge" -#define DRV_VERSION "0.8" +#define DRV_VERSION "0.9" #define PFX DRV_NAME " " #define DEFAULT_TX_RING_SIZE 128 @@ -876,6 +876,9 @@ static int skge_rx_fill(struct skge_port *skge) static void skge_link_up(struct skge_port *skge) { + skge_write8(skge->hw, SK_REG(skge->port, LNK_LED_REG), + LED_BLK_OFF|LED_SYNC_OFF|LED_ON); + netif_carrier_on(skge->netdev); if (skge->tx_avail > MAX_SKB_FRAGS + 1) netif_wake_queue(skge->netdev); @@ -894,6 +897,7 @@ static void skge_link_up(struct skge_port *skge) static void skge_link_down(struct skge_port *skge) { + skge_write8(skge->hw, SK_REG(skge->port, LNK_LED_REG), LED_OFF); netif_carrier_off(skge->netdev); netif_stop_queue(skge->netdev); -- cgit v1.2.1 From a4e137ab1447fc5009f21e257971aa60a9ec98fb Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 18 Aug 2005 10:06:59 +0100 Subject: [MFD] Add multimedia communication port core support Add support for the core of the multimedia communication port framework. This is a port used to communicate with devices with two DMA paths and a control path. Signed-off-by: Russell King --- drivers/Kconfig | 2 + drivers/Makefile | 2 +- drivers/mfd/Kconfig | 10 ++ drivers/mfd/Makefile | 5 + drivers/mfd/mcp-core.c | 255 +++++++++++++++++++++++++++++++++++++++++++++++++ drivers/mfd/mcp.h | 66 +++++++++++++ 6 files changed, 339 insertions(+), 1 deletion(-) create mode 100644 drivers/mfd/Kconfig create mode 100644 drivers/mfd/Makefile create mode 100644 drivers/mfd/mcp-core.c create mode 100644 drivers/mfd/mcp.h (limited to 'drivers') diff --git a/drivers/Kconfig b/drivers/Kconfig index cecab0acc3fe..46d655fab115 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -48,6 +48,8 @@ source "drivers/hwmon/Kconfig" source "drivers/misc/Kconfig" +source "drivers/mfd/Kconfig" + source "drivers/media/Kconfig" source "drivers/video/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 126a851d5653..9663132ed825 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -26,7 +26,7 @@ obj-$(CONFIG_FB_INTEL) += video/intelfb/ obj-$(CONFIG_SERIO) += input/serio/ obj-y += serial/ obj-$(CONFIG_PARPORT) += parport/ -obj-y += base/ block/ misc/ net/ media/ +obj-y += base/ block/ misc/ mfd/ net/ media/ obj-$(CONFIG_NUBUS) += nubus/ obj-$(CONFIG_ATM) += atm/ obj-$(CONFIG_PPC_PMAC) += macintosh/ diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig new file mode 100644 index 000000000000..e7d1f31aafff --- /dev/null +++ b/drivers/mfd/Kconfig @@ -0,0 +1,10 @@ +# +# Multifunction miscellaneous devices +# + +menu "Multimedia Capabilities Port drivers" + +config MCP + tristate + +endmenu diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile new file mode 100644 index 000000000000..ff31f281e28c --- /dev/null +++ b/drivers/mfd/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for multifunction miscellaneous devices +# + +obj-$(CONFIG_MCP) += mcp-core.o diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c new file mode 100644 index 000000000000..c75d713c01e4 --- /dev/null +++ b/drivers/mfd/mcp-core.c @@ -0,0 +1,255 @@ +/* + * linux/drivers/mfd/mcp-core.c + * + * Copyright (C) 2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * Generic MCP (Multimedia Communications Port) layer. All MCP locking + * is solely held within this file. + */ +#include +#include +#include +#include +#include + +#include +#include + +#include "mcp.h" + +#define to_mcp(d) container_of(d, struct mcp, attached_device) +#define to_mcp_driver(d) container_of(d, struct mcp_driver, drv) + +static int mcp_bus_match(struct device *dev, struct device_driver *drv) +{ + return 1; +} + +static int mcp_bus_probe(struct device *dev) +{ + struct mcp *mcp = to_mcp(dev); + struct mcp_driver *drv = to_mcp_driver(dev->driver); + + return drv->probe(mcp); +} + +static int mcp_bus_remove(struct device *dev) +{ + struct mcp *mcp = to_mcp(dev); + struct mcp_driver *drv = to_mcp_driver(dev->driver); + + drv->remove(mcp); + return 0; +} + +static int mcp_bus_suspend(struct device *dev, pm_message_t state) +{ + struct mcp *mcp = to_mcp(dev); + int ret = 0; + + if (dev->driver) { + struct mcp_driver *drv = to_mcp_driver(dev->driver); + + ret = drv->suspend(mcp, state); + } + return ret; +} + +static int mcp_bus_resume(struct device *dev) +{ + struct mcp *mcp = to_mcp(dev); + int ret = 0; + + if (dev->driver) { + struct mcp_driver *drv = to_mcp_driver(dev->driver); + + ret = drv->resume(mcp); + } + return ret; +} + +static struct bus_type mcp_bus_type = { + .name = "mcp", + .match = mcp_bus_match, + .suspend = mcp_bus_suspend, + .resume = mcp_bus_resume, +}; + +/** + * mcp_set_telecom_divisor - set the telecom divisor + * @mcp: MCP interface structure + * @div: SIB clock divisor + * + * Set the telecom divisor on the MCP interface. The resulting + * sample rate is SIBCLOCK/div. + */ +void mcp_set_telecom_divisor(struct mcp *mcp, unsigned int div) +{ + spin_lock_irq(&mcp->lock); + mcp->ops->set_telecom_divisor(mcp, div); + spin_unlock_irq(&mcp->lock); +} +EXPORT_SYMBOL(mcp_set_telecom_divisor); + +/** + * mcp_set_audio_divisor - set the audio divisor + * @mcp: MCP interface structure + * @div: SIB clock divisor + * + * Set the audio divisor on the MCP interface. + */ +void mcp_set_audio_divisor(struct mcp *mcp, unsigned int div) +{ + spin_lock_irq(&mcp->lock); + mcp->ops->set_audio_divisor(mcp, div); + spin_unlock_irq(&mcp->lock); +} +EXPORT_SYMBOL(mcp_set_audio_divisor); + +/** + * mcp_reg_write - write a device register + * @mcp: MCP interface structure + * @reg: 4-bit register index + * @val: 16-bit data value + * + * Write a device register. The MCP interface must be enabled + * to prevent this function hanging. + */ +void mcp_reg_write(struct mcp *mcp, unsigned int reg, unsigned int val) +{ + unsigned long flags; + + spin_lock_irqsave(&mcp->lock, flags); + mcp->ops->reg_write(mcp, reg, val); + spin_unlock_irqrestore(&mcp->lock, flags); +} +EXPORT_SYMBOL(mcp_reg_write); + +/** + * mcp_reg_read - read a device register + * @mcp: MCP interface structure + * @reg: 4-bit register index + * + * Read a device register and return its value. The MCP interface + * must be enabled to prevent this function hanging. + */ +unsigned int mcp_reg_read(struct mcp *mcp, unsigned int reg) +{ + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&mcp->lock, flags); + val = mcp->ops->reg_read(mcp, reg); + spin_unlock_irqrestore(&mcp->lock, flags); + + return val; +} +EXPORT_SYMBOL(mcp_reg_read); + +/** + * mcp_enable - enable the MCP interface + * @mcp: MCP interface to enable + * + * Enable the MCP interface. Each call to mcp_enable will need + * a corresponding call to mcp_disable to disable the interface. + */ +void mcp_enable(struct mcp *mcp) +{ + spin_lock_irq(&mcp->lock); + if (mcp->use_count++ == 0) + mcp->ops->enable(mcp); + spin_unlock_irq(&mcp->lock); +} +EXPORT_SYMBOL(mcp_enable); + +/** + * mcp_disable - disable the MCP interface + * @mcp: MCP interface to disable + * + * Disable the MCP interface. The MCP interface will only be + * disabled once the number of calls to mcp_enable matches the + * number of calls to mcp_disable. + */ +void mcp_disable(struct mcp *mcp) +{ + unsigned long flags; + + spin_lock_irqsave(&mcp->lock, flags); + if (--mcp->use_count == 0) + mcp->ops->disable(mcp); + spin_unlock_irqrestore(&mcp->lock, flags); +} +EXPORT_SYMBOL(mcp_disable); + +static void mcp_release(struct device *dev) +{ + struct mcp *mcp = container_of(dev, struct mcp, attached_device); + + kfree(mcp); +} + +struct mcp *mcp_host_alloc(struct device *parent, size_t size) +{ + struct mcp *mcp; + + mcp = kmalloc(sizeof(struct mcp) + size, GFP_KERNEL); + if (mcp) { + memset(mcp, 0, sizeof(struct mcp) + size); + spin_lock_init(&mcp->lock); + mcp->attached_device.parent = parent; + mcp->attached_device.bus = &mcp_bus_type; + mcp->attached_device.dma_mask = parent->dma_mask; + mcp->attached_device.release = mcp_release; + } + return mcp; +} +EXPORT_SYMBOL(mcp_host_alloc); + +int mcp_host_register(struct mcp *mcp) +{ + strcpy(mcp->attached_device.bus_id, "mcp0"); + return device_register(&mcp->attached_device); +} +EXPORT_SYMBOL(mcp_host_register); + +void mcp_host_unregister(struct mcp *mcp) +{ + device_unregister(&mcp->attached_device); +} +EXPORT_SYMBOL(mcp_host_unregister); + +int mcp_driver_register(struct mcp_driver *mcpdrv) +{ + mcpdrv->drv.bus = &mcp_bus_type; + mcpdrv->drv.probe = mcp_bus_probe; + mcpdrv->drv.remove = mcp_bus_remove; + return driver_register(&mcpdrv->drv); +} +EXPORT_SYMBOL(mcp_driver_register); + +void mcp_driver_unregister(struct mcp_driver *mcpdrv) +{ + driver_unregister(&mcpdrv->drv); +} +EXPORT_SYMBOL(mcp_driver_unregister); + +static int __init mcp_init(void) +{ + return bus_register(&mcp_bus_type); +} + +static void __exit mcp_exit(void) +{ + bus_unregister(&mcp_bus_type); +} + +module_init(mcp_init); +module_exit(mcp_exit); + +MODULE_AUTHOR("Russell King "); +MODULE_DESCRIPTION("Core multimedia communications port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/mcp.h b/drivers/mfd/mcp.h new file mode 100644 index 000000000000..c093a93b8808 --- /dev/null +++ b/drivers/mfd/mcp.h @@ -0,0 +1,66 @@ +/* + * linux/drivers/mfd/mcp.h + * + * Copyright (C) 2001 Russell King, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ +#ifndef MCP_H +#define MCP_H + +struct mcp_ops; + +struct mcp { + struct module *owner; + struct mcp_ops *ops; + spinlock_t lock; + int use_count; + unsigned int sclk_rate; + unsigned int rw_timeout; + dma_device_t dma_audio_rd; + dma_device_t dma_audio_wr; + dma_device_t dma_telco_rd; + dma_device_t dma_telco_wr; + struct device attached_device; +}; + +struct mcp_ops { + void (*set_telecom_divisor)(struct mcp *, unsigned int); + void (*set_audio_divisor)(struct mcp *, unsigned int); + void (*reg_write)(struct mcp *, unsigned int, unsigned int); + unsigned int (*reg_read)(struct mcp *, unsigned int); + void (*enable)(struct mcp *); + void (*disable)(struct mcp *); +}; + +void mcp_set_telecom_divisor(struct mcp *, unsigned int); +void mcp_set_audio_divisor(struct mcp *, unsigned int); +void mcp_reg_write(struct mcp *, unsigned int, unsigned int); +unsigned int mcp_reg_read(struct mcp *, unsigned int); +void mcp_enable(struct mcp *); +void mcp_disable(struct mcp *); +#define mcp_get_sclk_rate(mcp) ((mcp)->sclk_rate) + +struct mcp *mcp_host_alloc(struct device *, size_t); +int mcp_host_register(struct mcp *); +void mcp_host_unregister(struct mcp *); + +struct mcp_driver { + struct device_driver drv; + int (*probe)(struct mcp *); + void (*remove)(struct mcp *); + int (*suspend)(struct mcp *, pm_message_t); + int (*resume)(struct mcp *); +}; + +int mcp_driver_register(struct mcp_driver *); +void mcp_driver_unregister(struct mcp_driver *); + +#define mcp_get_drvdata(mcp) dev_get_drvdata(&(mcp)->attached_device) +#define mcp_set_drvdata(mcp,d) dev_set_drvdata(&(mcp)->attached_device, d) + +#define mcp_priv(mcp) ((void *)((mcp)+1)) + +#endif -- cgit v1.2.1 From 5e742ad66b4a8ba6f9d729660f822676d9e405d4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 18 Aug 2005 10:08:15 +0100 Subject: [MFD] Add SA11x0 MCP support This adds support for the MCP interface found on SA11x0 devices. Signed-off-by: Russell King --- drivers/mfd/Kconfig | 6 ++ drivers/mfd/Makefile | 1 + drivers/mfd/mcp-sa11x0.c | 275 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 282 insertions(+) create mode 100644 drivers/mfd/mcp-sa11x0.c (limited to 'drivers') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index e7d1f31aafff..1588a59e3767 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -7,4 +7,10 @@ menu "Multimedia Capabilities Port drivers" config MCP tristate +# Interface drivers +config MCP_SA11X0 + tristate "Support SA11x0 MCP interface" + depends on ARCH_SA1100 + select MCP + endmenu diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index ff31f281e28c..98bdd6a42188 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_MCP) += mcp-core.o +obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c new file mode 100644 index 000000000000..25699fa37fef --- /dev/null +++ b/drivers/mfd/mcp-sa11x0.c @@ -0,0 +1,275 @@ +/* + * linux/drivers/mfd/mcp-sa11x0.c + * + * Copyright (C) 2001-2005 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * SA11x0 MCP (Multimedia Communications Port) driver. + * + * MCP read/write timeouts from Jordi Colomer, rehacked by rmk. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include "mcp.h" + +struct mcp_sa11x0 { + u32 mccr0; + u32 mccr1; +}; + +#define priv(mcp) ((struct mcp_sa11x0 *)mcp_priv(mcp)) + +static void +mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor) +{ + unsigned int mccr0; + + divisor /= 32; + + mccr0 = Ser4MCCR0 & ~0x00007f00; + mccr0 |= divisor << 8; + Ser4MCCR0 = mccr0; +} + +static void +mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor) +{ + unsigned int mccr0; + + divisor /= 32; + + mccr0 = Ser4MCCR0 & ~0x0000007f; + mccr0 |= divisor; + Ser4MCCR0 = mccr0; +} + +/* + * Write data to the device. The bit should be set after 3 subframe + * times (each frame is 64 clocks). We wait a maximum of 6 subframes. + * We really should try doing something more productive while we + * wait. + */ +static void +mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val) +{ + int ret = -ETIME; + int i; + + Ser4MCDR2 = reg << 17 | MCDR2_Wr | (val & 0xffff); + + for (i = 0; i < 2; i++) { + udelay(mcp->rw_timeout); + if (Ser4MCSR & MCSR_CWC) { + ret = 0; + break; + } + } + + if (ret < 0) + printk(KERN_WARNING "mcp: write timed out\n"); +} + +/* + * Read data from the device. The bit should be set after 3 subframe + * times (each frame is 64 clocks). We wait a maximum of 6 subframes. + * We really should try doing something more productive while we + * wait. + */ +static unsigned int +mcp_sa11x0_read(struct mcp *mcp, unsigned int reg) +{ + int ret = -ETIME; + int i; + + Ser4MCDR2 = reg << 17 | MCDR2_Rd; + + for (i = 0; i < 2; i++) { + udelay(mcp->rw_timeout); + if (Ser4MCSR & MCSR_CRC) { + ret = Ser4MCDR2 & 0xffff; + break; + } + } + + if (ret < 0) + printk(KERN_WARNING "mcp: read timed out\n"); + + return ret; +} + +static void mcp_sa11x0_enable(struct mcp *mcp) +{ + Ser4MCSR = -1; + Ser4MCCR0 |= MCCR0_MCE; +} + +static void mcp_sa11x0_disable(struct mcp *mcp) +{ + Ser4MCCR0 &= ~MCCR0_MCE; +} + +/* + * Our methods. + */ +static struct mcp_ops mcp_sa11x0 = { + .set_telecom_divisor = mcp_sa11x0_set_telecom_divisor, + .set_audio_divisor = mcp_sa11x0_set_audio_divisor, + .reg_write = mcp_sa11x0_write, + .reg_read = mcp_sa11x0_read, + .enable = mcp_sa11x0_enable, + .disable = mcp_sa11x0_disable, +}; + +static int mcp_sa11x0_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct mcp *mcp; + int ret; + + if (!machine_is_adsbitsy() && !machine_is_assabet() && + !machine_is_cerf() && !machine_is_flexanet() && + !machine_is_freebird() && !machine_is_graphicsclient() && + !machine_is_graphicsmaster() && !machine_is_lart() && + !machine_is_omnimeter() && !machine_is_pfs168() && + !machine_is_shannon() && !machine_is_simpad() && + !machine_is_yopy()) + return -ENODEV; + + if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp")) + return -EBUSY; + + mcp = mcp_host_alloc(&pdev->dev, sizeof(struct mcp_sa11x0)); + if (!mcp) { + ret = -ENOMEM; + goto release; + } + + mcp->owner = THIS_MODULE; + mcp->ops = &mcp_sa11x0; + mcp->sclk_rate = 11981000, + mcp->dma_audio_rd = DMA_Ser4MCP0Rd; + mcp->dma_audio_wr = DMA_Ser4MCP0Wr; + mcp->dma_telco_rd = DMA_Ser4MCP1Rd; + mcp->dma_telco_wr = DMA_Ser4MCP1Wr; + + dev_set_drvdata(dev, mcp); + + if (machine_is_assabet()) { + ASSABET_BCR_set(ASSABET_BCR_CODEC_RST); + } + + /* + * Setup the PPC unit correctly. + */ + PPDR &= ~PPC_RXD4; + PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; + PSDR |= PPC_RXD4; + PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + + Ser4MCSR = -1; + Ser4MCCR1 = 0; + Ser4MCCR0 = 0x00007f7f | MCCR0_ADM; + + /* + * Calculate the read/write timeout (us) from the bit clock + * rate. This is the period for 3 64-bit frames. Always + * round this time up. + */ + mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) / + mcp->sclk_rate; + + ret = mcp_host_register(mcp); + if (ret == 0) + goto out; + + release: + release_mem_region(0x80060000, 0x60); + dev_set_drvdata(dev, NULL); + + out: + return ret; +} + +static int mcp_sa11x0_remove(struct device *dev) +{ + struct mcp *mcp = dev_get_drvdata(dev); + + dev_set_drvdata(dev, NULL); + mcp_host_unregister(mcp); + release_mem_region(0x80060000, 0x60); + + return 0; +} + +static int mcp_sa11x0_suspend(struct device *dev, pm_message_t state, u32 level) +{ + struct mcp *mcp = dev_get_drvdata(dev); + + if (level == SUSPEND_DISABLE) { + priv(mcp)->mccr0 = Ser4MCCR0; + priv(mcp)->mccr1 = Ser4MCCR1; + Ser4MCCR0 &= ~MCCR0_MCE; + } + return 0; +} + +static int mcp_sa11x0_resume(struct device *dev, u32 level) +{ + struct mcp *mcp = dev_get_drvdata(dev); + + if (level == RESUME_RESTORE_STATE) { + Ser4MCCR1 = priv(mcp)->mccr1; + Ser4MCCR0 = priv(mcp)->mccr0; + } + return 0; +} + +/* + * The driver for the SA11x0 MCP port. + */ +static struct device_driver mcp_sa11x0_driver = { + .name = "sa11x0-mcp", + .bus = &platform_bus_type, + .probe = mcp_sa11x0_probe, + .remove = mcp_sa11x0_remove, + .suspend = mcp_sa11x0_suspend, + .resume = mcp_sa11x0_resume, +}; + +/* + * This needs re-working + */ +static int __init mcp_sa11x0_init(void) +{ + return driver_register(&mcp_sa11x0_driver); +} + +static void __exit mcp_sa11x0_exit(void) +{ + driver_unregister(&mcp_sa11x0_driver); +} + +module_init(mcp_sa11x0_init); +module_exit(mcp_sa11x0_exit); + +MODULE_AUTHOR("Russell King "); +MODULE_DESCRIPTION("SA11x0 multimedia communications port driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.1 From 323cdfc191b7c1597dc748175062c368568d6af4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 18 Aug 2005 10:10:46 +0100 Subject: [MFD] Add SA11x0 MCP platform device support Add platform device data for the SA11x0 MCP device. This allows platforms to customise the configuration of the SA11x0 MCP device according to their needs. Signed-off-by: Russell King --- drivers/mfd/mcp-sa11x0.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c index 25699fa37fef..e9806fbbe696 100644 --- a/drivers/mfd/mcp-sa11x0.c +++ b/drivers/mfd/mcp-sa11x0.c @@ -24,6 +24,7 @@ #include #include #include +#include #include @@ -140,16 +141,11 @@ static struct mcp_ops mcp_sa11x0 = { static int mcp_sa11x0_probe(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); + struct mcp_plat_data *data = pdev->dev.platform_data; struct mcp *mcp; int ret; - if (!machine_is_adsbitsy() && !machine_is_assabet() && - !machine_is_cerf() && !machine_is_flexanet() && - !machine_is_freebird() && !machine_is_graphicsclient() && - !machine_is_graphicsmaster() && !machine_is_lart() && - !machine_is_omnimeter() && !machine_is_pfs168() && - !machine_is_shannon() && !machine_is_simpad() && - !machine_is_yopy()) + if (!data) return -ENODEV; if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp")) @@ -163,7 +159,7 @@ static int mcp_sa11x0_probe(struct device *dev) mcp->owner = THIS_MODULE; mcp->ops = &mcp_sa11x0; - mcp->sclk_rate = 11981000, + mcp->sclk_rate = data->sclk_rate; mcp->dma_audio_rd = DMA_Ser4MCP0Rd; mcp->dma_audio_wr = DMA_Ser4MCP0Wr; mcp->dma_telco_rd = DMA_Ser4MCP1Rd; @@ -184,9 +180,13 @@ static int mcp_sa11x0_probe(struct device *dev) PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + /* + * Initialise device. Note that we initially + * set the sampling rate to minimum. + */ Ser4MCSR = -1; - Ser4MCCR1 = 0; - Ser4MCCR0 = 0x00007f7f | MCCR0_ADM; + Ser4MCCR1 = data->mccr1; + Ser4MCCR0 = data->mccr0 | 0x7f7f; /* * Calculate the read/write timeout (us) from the bit clock -- cgit v1.2.1 From 1b1b3c9b6d346d441a99e2de0b34f3ba93963ad8 Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Sat, 6 Aug 2005 23:47:55 +0200 Subject: [PATCH] forcedeth: Initialize link settings in every nv_open() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Rüdiger found a bug in nv_open that explains some of the reports with duplex mismatches: nv_open calls nv_update_link_speed for initializing the hardware link speed registers. If current link setting matches the values in np->linkspeed and np->duplex, then the function does nothing. Usually, doing nothing is the right thing, but not in nv_open: During nv_open, the registers must be initialized because the nic was reset. The attached patch fixes that by setting np->linkspeed to an invalid value before calling nv_update_link_speed from nv_open. Signed-Off-By: Manfred Spraul Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index f165ae973985..7d93948aec83 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -93,6 +93,8 @@ * 0.40: 19 Jul 2005: Add support for mac address change. * 0.41: 30 Jul 2005: Write back original MAC in nv_close instead * of nv_remove + * 0.42: 06 Aug 2005: Fix lack of link speed initialization + * in the second (and later) nv_open call * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -2178,6 +2180,9 @@ static int nv_open(struct net_device *dev) writel(NVREG_MIISTAT_MASK, base + NvRegMIIStatus); dprintk(KERN_INFO "startup: got 0x%08x.\n", miistat); } + /* set linkspeed to invalid value, thus force nv_update_linkspeed + * to init hw */ + np->linkspeed = 0; ret = nv_update_linkspeed(dev); nv_start_rx(dev); nv_start_tx(dev); -- cgit v1.2.1 From a51d74409d856e472bad753aecf1f2715718c242 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Mon, 27 Jun 2005 09:20:04 -0700 Subject: [PATCH] net/cycx_drv: replace delay_cycx() with msleep_interruptible() Use msleep_interruptible() instead of delay_cycx() to guarantee the task delays as expected. Remove the prototype and definition of delay_cycx(). Signed-off-by: Nishanth Aravamudan Signed-off-by: Jeff Garzik --- drivers/net/wan/cycx_drv.c | 24 ++++++++---------------- 1 file changed, 8 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c index 6e74af62ca08..9e56fc346ba4 100644 --- a/drivers/net/wan/cycx_drv.c +++ b/drivers/net/wan/cycx_drv.c @@ -56,7 +56,7 @@ #include /* for jiffies, HZ, etc. */ #include /* API definitions */ #include /* CYCX firmware module definitions */ -#include /* udelay */ +#include /* udelay, msleep_interruptible */ #include /* read[wl], write[wl], ioremap, iounmap */ #define MOD_VERSION 0 @@ -74,7 +74,6 @@ static int reset_cyc2x(void __iomem *addr); static int detect_cyc2x(void __iomem *addr); /* Miscellaneous functions */ -static void delay_cycx(int sec); static int get_option_index(long *optlist, long optval); static u16 checksum(u8 *buf, u32 len); @@ -259,7 +258,7 @@ static int memory_exists(void __iomem *addr) if (readw(addr + 0x10) == TEST_PATTERN) return 1; - delay_cycx(1); + msleep_interruptible(1 * 1000); } return 0; @@ -316,7 +315,7 @@ static void cycx_reset_boot(void __iomem *addr, u8 *code, u32 len) /* 80186 was in hold, go */ writeb(0, addr + START_CPU); - delay_cycx(1); + msleep_interruptible(1 * 1000); } /* Load data.bin file through boot (reset) interface. */ @@ -462,13 +461,13 @@ static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len) cycx_reset_boot(hw->dpmbase, reset_image, img_hdr->reset_size); /* reset is waiting for boot */ writew(GEN_POWER_ON, pt_cycld); - delay_cycx(1); + msleep_interruptible(1 * 1000); for (j = 0 ; j < 3 ; j++) if (!readw(pt_cycld)) goto reset_loaded; else - delay_cycx(1); + msleep_interruptible(1 * 1000); } printk(KERN_ERR "%s: reset not started.\n", modname); @@ -495,7 +494,7 @@ reset_loaded: /* Arthur Ganzert's tip: wait a while after the firmware loading... seg abr 26 17:17:12 EST 1999 - acme */ - delay_cycx(7); + msleep_interruptible(7 * 1000); printk(KERN_INFO "%s: firmware loaded!\n", modname); /* enable interrupts */ @@ -547,20 +546,13 @@ static int get_option_index(long *optlist, long optval) static int reset_cyc2x(void __iomem *addr) { writeb(0, addr + RST_ENABLE); - delay_cycx(2); + msleep_interruptible(2 * 1000); writeb(0, addr + RST_DISABLE); - delay_cycx(2); + msleep_interruptible(2 * 1000); return memory_exists(addr); } -/* Delay */ -static void delay_cycx(int sec) -{ - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(sec * HZ); -} - /* Calculate 16-bit CRC using CCITT polynomial. */ static u16 checksum(u8 *buf, u32 len) { -- cgit v1.2.1 From 913168de6284cd27810e9ee7ae029d408a2a0555 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 01:12:11 +0200 Subject: [PATCH] r8169: PCI ID for the Linksys EG1032 The Linksys EG1032 uses Realtek's 8169 chipset. Credit goes to Bob Wilson for the report. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/r8169.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index d5afe05cd826..2f9b3227243b 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -186,6 +186,7 @@ const static struct { static struct pci_device_id rtl8169_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169), }, { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4300), }, + { PCI_DEVICE(PCI_VENDOR_ID_LINKSYS, 0x1032), }, { PCI_DEVICE(0x16ec, 0x0116), }, {0,}, }; -- cgit v1.2.1 From d9a8a0a3574525bf422fd2f05eec739c0d25814f Mon Sep 17 00:00:00 2001 From: Komuro Date: Sat, 6 Aug 2005 12:01:43 +0900 Subject: [PATCH] network: fix fmvj18x_cs multicast code The multicast code of the fmvj18x_cs driver is broken. I fixed it to work properly. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: Jeff Garzik --- drivers/net/pcmcia/fmvj18x_cs.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index 9d8197bb293a..384a736a0d2f 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -134,7 +134,7 @@ typedef struct local_info_t { u_char mc_filter[8]; } local_info_t; -#define MC_FILTERBREAK 64 +#define MC_FILTERBREAK 8 /*====================================================================*/ /* @@ -1012,7 +1012,7 @@ static void fjn_reset(struct net_device *dev) outb(BANK_1U, ioaddr + CONFIG_1); /* set the multicast table to accept none. */ - for (i = 0; i < 6; i++) + for (i = 0; i < 8; i++) outb(0x00, ioaddr + MAR_ADR + i); /* Switch to bank 2 (runtime mode) */ @@ -1269,6 +1269,16 @@ static void set_rx_mode(struct net_device *dev) u_long flags; int i; + int saved_config_0 = inb(ioaddr + CONFIG_0); + + local_irq_save(flags); + + /* Disable Tx and Rx */ + if (sram_config == 0) + outb(CONFIG0_RST, ioaddr + CONFIG_0); + else + outb(CONFIG0_RST_1, ioaddr + CONFIG_0); + if (dev->flags & IFF_PROMISC) { /* Unconditionally log net taps. */ printk("%s: Promiscuous mode enabled.\n", dev->name); @@ -1290,20 +1300,23 @@ static void set_rx_mode(struct net_device *dev) for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) { unsigned int bit = - ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x3f; - mc_filter[bit >> 3] |= (1 << bit); + ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 26; + mc_filter[bit >> 3] |= (1 << (bit & 7)); } + outb(2, ioaddr + RX_MODE); /* Use normal mode. */ } - local_irq_save(flags); if (memcmp(mc_filter, lp->mc_filter, sizeof(mc_filter))) { int saved_bank = inb(ioaddr + CONFIG_1); /* Switch to bank 1 and set the multicast table. */ outb(0xe4, ioaddr + CONFIG_1); for (i = 0; i < 8; i++) - outb(mc_filter[i], ioaddr + 8 + i); + outb(mc_filter[i], ioaddr + MAR_ADR + i); memcpy(lp->mc_filter, mc_filter, sizeof(mc_filter)); outb(saved_bank, ioaddr + CONFIG_1); } + + outb(saved_config_0, ioaddr + CONFIG_0); + local_irq_restore(flags); } -- cgit v1.2.1 From b4ee21f442ba7a8c43e00b32088d437259890cd0 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 27 Jul 2005 01:14:44 -0700 Subject: [PATCH] e1000 printk warning fix 2 drivers/net/e1000/e1000_main.c: In function `e1000_clean_tx_irq': drivers/net/e1000/e1000_main.c:2774: warning: size_t format, dma_addr_t arg (arg 8) Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index b82fd15d0891..9b596e0bbf95 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -2767,7 +2767,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) " next_to_use <%x>\n" " next_to_clean <%x>\n" "buffer_info[next_to_clean]\n" - " dma <%zx>\n" + " dma <%llx>\n" " time_stamp <%lx>\n" " next_to_watch <%x>\n" " jiffies <%lx>\n" @@ -2776,7 +2776,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) E1000_READ_REG(&adapter->hw, TDT), tx_ring->next_to_use, i, - tx_ring->buffer_info[i].dma, + (unsigned long long)tx_ring->buffer_info[i].dma, tx_ring->buffer_info[i].time_stamp, eop, jiffies, -- cgit v1.2.1 From 9f7f0098eaadd9200ab52ad0dad523f797d3bf39 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 19 Aug 2005 03:52:49 -0400 Subject: [netdrvr eepro100] check for skb==NULL before calling rx_align(skb) --- drivers/net/eepro100.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c index 1795425f512e..8c62ced2c9b2 100644 --- a/drivers/net/eepro100.c +++ b/drivers/net/eepro100.c @@ -1263,8 +1263,8 @@ speedo_init_rx_ring(struct net_device *dev) for (i = 0; i < RX_RING_SIZE; i++) { struct sk_buff *skb; skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD)); - /* XXX: do we really want to call this before the NULL check? --hch */ - rx_align(skb); /* Align IP on 16 byte boundary */ + if (skb) + rx_align(skb); /* Align IP on 16 byte boundary */ sp->rx_skbuff[i] = skb; if (skb == NULL) break; /* OK. Just initially short of Rx bufs. */ @@ -1654,8 +1654,8 @@ static inline struct RxFD *speedo_rx_alloc(struct net_device *dev, int entry) struct sk_buff *skb; /* Get a fresh skbuff to replace the consumed one. */ skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD)); - /* XXX: do we really want to call this before the NULL check? --hch */ - rx_align(skb); /* Align IP on 16 byte boundary */ + if (skb) + rx_align(skb); /* Align IP on 16 byte boundary */ sp->rx_skbuff[entry] = skb; if (skb == NULL) { sp->rx_ringp[entry] = NULL; -- cgit v1.2.1 From d366b6436386875b1310ce8f70e3f9dea4647bac Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 19 Aug 2005 09:40:08 +0100 Subject: [MMC] Add mmc_hostname() macro mmc_hostname() returns a pointer to the hostname for the mmc_host. Signed-off-by: Russell King --- drivers/mmc/mmc.c | 6 +++--- drivers/mmc/mmc_sysfs.c | 2 +- drivers/mmc/mmci.c | 4 ++-- drivers/mmc/wbsd.c | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index eeb9f6668e69..e02e5df80be9 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -361,7 +361,7 @@ static void mmc_decode_cid(struct mmc_card *card) default: printk("%s: card has unknown MMCA version %d\n", - card->host->host_name, card->csd.mmca_vsn); + mmc_hostname(card->host), card->csd.mmca_vsn); mmc_card_set_bad(card); break; } @@ -383,7 +383,7 @@ static void mmc_decode_csd(struct mmc_card *card) csd_struct = UNSTUFF_BITS(resp, 126, 2); if (csd_struct != 1 && csd_struct != 2) { printk("%s: unrecognised CSD structure version %d\n", - card->host->host_name, csd_struct); + mmc_hostname(card->host), csd_struct); mmc_card_set_bad(card); return; } @@ -551,7 +551,7 @@ static void mmc_discover_cards(struct mmc_host *host) } if (err != MMC_ERR_NONE) { printk(KERN_ERR "%s: error requesting CID: %d\n", - host->host_name, err); + mmc_hostname(host), err); break; } diff --git a/drivers/mmc/mmc_sysfs.c b/drivers/mmc/mmc_sysfs.c index 5556cd3b5559..3a6b325a9149 100644 --- a/drivers/mmc/mmc_sysfs.c +++ b/drivers/mmc/mmc_sysfs.c @@ -206,7 +206,7 @@ void mmc_init_card(struct mmc_card *card, struct mmc_host *host) int mmc_register_card(struct mmc_card *card) { snprintf(card->dev.bus_id, sizeof(card->dev.bus_id), - "%s:%04x", card->host->host_name, card->rca); + "%s:%04x", mmc_hostname(card->host), card->rca); return device_add(&card->dev); } diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c index 7a42966d755b..716c4ef4faf6 100644 --- a/drivers/mmc/mmci.c +++ b/drivers/mmc/mmci.c @@ -34,7 +34,7 @@ #ifdef CONFIG_MMC_DEBUG #define DBG(host,fmt,args...) \ - pr_debug("%s: %s: " fmt, host->mmc->host_name, __func__ , args) + pr_debug("%s: %s: " fmt, mmc_hostname(host->mmc), __func__ , args) #else #define DBG(host,fmt,args...) do { } while (0) #endif @@ -541,7 +541,7 @@ static int mmci_probe(struct amba_device *dev, void *id) mmc_add_host(mmc); printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%08lx irq %d,%d\n", - mmc->host_name, amba_rev(dev), amba_config(dev), + mmc_hostname(mmc), amba_rev(dev), amba_config(dev), dev->res.start, dev->irq[0], dev->irq[1]); init_timer(&host->timer); diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c index 974f2f36bdbe..402c2d661fb2 100644 --- a/drivers/mmc/wbsd.c +++ b/drivers/mmc/wbsd.c @@ -1796,7 +1796,7 @@ static int __devinit wbsd_init(struct device* dev, int base, int irq, int dma, mmc_add_host(mmc); - printk(KERN_INFO "%s: W83L51xD", mmc->host_name); + printk(KERN_INFO "%s: W83L51xD", mmc_hostname(mmc)); if (host->chip_id != 0) printk(" id %x", (int)host->chip_id); printk(" at 0x%x irq %d", (int)host->base, (int)host->irq); -- cgit v1.2.1 From 00b137cfda5276b3d2c87d44236fe4c5ee68b405 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 19 Aug 2005 09:41:24 +0100 Subject: [MMC] Add MMC class devices Create a mmc_host class to allow enumeration of MMC host controllers even though they have no card(s) inserted. Patch based on work by Pierre Ossman. Signed-off-by: Russell King --- drivers/mmc/mmc.c | 23 +++++++--------- drivers/mmc/mmc.h | 5 ++++ drivers/mmc/mmc_sysfs.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 86 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index e02e5df80be9..3c5904834fe8 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -796,17 +796,13 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) { struct mmc_host *host; - host = kmalloc(sizeof(struct mmc_host) + extra, GFP_KERNEL); + host = mmc_alloc_host_sysfs(extra, dev); if (host) { - memset(host, 0, sizeof(struct mmc_host) + extra); - spin_lock_init(&host->lock); init_waitqueue_head(&host->wq); INIT_LIST_HEAD(&host->cards); INIT_WORK(&host->detect, mmc_rescan, host); - host->dev = dev; - /* * By default, hosts do not support SGIO or large requests. * They have to set these according to their abilities. @@ -828,15 +824,15 @@ EXPORT_SYMBOL(mmc_alloc_host); */ int mmc_add_host(struct mmc_host *host) { - static unsigned int host_num; + int ret; - snprintf(host->host_name, sizeof(host->host_name), - "mmc%d", host_num++); - - mmc_power_off(host); - mmc_detect_change(host); + ret = mmc_add_host_sysfs(host); + if (ret == 0) { + mmc_power_off(host); + mmc_detect_change(host); + } - return 0; + return ret; } EXPORT_SYMBOL(mmc_add_host); @@ -859,6 +855,7 @@ void mmc_remove_host(struct mmc_host *host) } mmc_power_off(host); + mmc_remove_host_sysfs(host); } EXPORT_SYMBOL(mmc_remove_host); @@ -872,7 +869,7 @@ EXPORT_SYMBOL(mmc_remove_host); void mmc_free_host(struct mmc_host *host) { flush_scheduled_work(); - kfree(host); + mmc_free_host_sysfs(host); } EXPORT_SYMBOL(mmc_free_host); diff --git a/drivers/mmc/mmc.h b/drivers/mmc/mmc.h index b498dffe0b11..97bae00292fa 100644 --- a/drivers/mmc/mmc.h +++ b/drivers/mmc/mmc.h @@ -13,4 +13,9 @@ void mmc_init_card(struct mmc_card *card, struct mmc_host *host); int mmc_register_card(struct mmc_card *card); void mmc_remove_card(struct mmc_card *card); + +struct mmc_host *mmc_alloc_host_sysfs(int extra, struct device *dev); +int mmc_add_host_sysfs(struct mmc_host *host); +void mmc_remove_host_sysfs(struct mmc_host *host); +void mmc_free_host_sysfs(struct mmc_host *host); #endif diff --git a/drivers/mmc/mmc_sysfs.c b/drivers/mmc/mmc_sysfs.c index 3a6b325a9149..96c192057df3 100644 --- a/drivers/mmc/mmc_sysfs.c +++ b/drivers/mmc/mmc_sysfs.c @@ -20,6 +20,7 @@ #define dev_to_mmc_card(d) container_of(d, struct mmc_card, dev) #define to_mmc_driver(d) container_of(d, struct mmc_driver, drv) +#define cls_dev_to_mmc_host(d) container_of(d, struct mmc_host, class_dev) #define MMC_ATTR(name, fmt, args...) \ static ssize_t mmc_##name##_show (struct device *dev, struct device_attribute *attr, char *buf) \ @@ -224,13 +225,82 @@ void mmc_remove_card(struct mmc_card *card) } +static void mmc_host_classdev_release(struct class_device *dev) +{ + struct mmc_host *host = cls_dev_to_mmc_host(dev); + kfree(host); +} + +static struct class mmc_host_class = { + .name = "mmc_host", + .release = mmc_host_classdev_release, +}; + +/* + * Internal function. Allocate a new MMC host. + */ +struct mmc_host *mmc_alloc_host_sysfs(int extra, struct device *dev) +{ + struct mmc_host *host; + + host = kmalloc(sizeof(struct mmc_host) + extra, GFP_KERNEL); + if (host) { + memset(host, 0, sizeof(struct mmc_host) + extra); + + host->dev = dev; + host->class_dev.dev = host->dev; + host->class_dev.class = &mmc_host_class; + class_device_initialize(&host->class_dev); + } + + return host; +} + +/* + * Internal function. Register a new MMC host with the MMC class. + */ +int mmc_add_host_sysfs(struct mmc_host *host) +{ + static unsigned int host_num; + + snprintf(host->host_name, sizeof(host->host_name), + "mmc%d", host_num++); + + strlcpy(host->class_dev.class_id, host->host_name, BUS_ID_SIZE); + return class_device_add(&host->class_dev); +} + +/* + * Internal function. Unregister a MMC host with the MMC class. + */ +void mmc_remove_host_sysfs(struct mmc_host *host) +{ + class_device_del(&host->class_dev); +} + +/* + * Internal function. Free a MMC host. + */ +void mmc_free_host_sysfs(struct mmc_host *host) +{ + class_device_put(&host->class_dev); +} + + static int __init mmc_init(void) { - return bus_register(&mmc_bus_type); + int ret = bus_register(&mmc_bus_type); + if (ret == 0) { + ret = class_register(&mmc_host_class); + if (ret) + bus_unregister(&mmc_bus_type); + } + return ret; } static void __exit mmc_exit(void) { + class_unregister(&mmc_host_class); bus_unregister(&mmc_bus_type); } -- cgit v1.2.1 From 1ad434d7cf5f490c71cfbbb2fb91076c01c8704e Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 19 Aug 2005 09:42:21 +0100 Subject: [MMC] Use class device name for mmc host name There's no point in having the host name duplicated between the mmc_host structure and the encapsulated class device structure. Signed-off-by: Russell King --- drivers/mmc/mmc_sysfs.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/mmc_sysfs.c b/drivers/mmc/mmc_sysfs.c index 96c192057df3..34fa4a3a02d5 100644 --- a/drivers/mmc/mmc_sysfs.c +++ b/drivers/mmc/mmc_sysfs.c @@ -263,10 +263,9 @@ int mmc_add_host_sysfs(struct mmc_host *host) { static unsigned int host_num; - snprintf(host->host_name, sizeof(host->host_name), + snprintf(host->class_dev.class_id, BUS_ID_SIZE, "mmc%d", host_num++); - strlcpy(host->class_dev.class_id, host->host_name, BUS_ID_SIZE); return class_device_add(&host->class_dev); } -- cgit v1.2.1 From dce773771834221817e2d359a7e07a618ba08807 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 19 Aug 2005 09:42:52 +0100 Subject: [MMC] Use an IDR for host name indicies Signed-off-by: Russell King --- drivers/mmc/mmc_sysfs.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/mmc_sysfs.c b/drivers/mmc/mmc_sysfs.c index 34fa4a3a02d5..ad8949810fc5 100644 --- a/drivers/mmc/mmc_sysfs.c +++ b/drivers/mmc/mmc_sysfs.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -236,6 +237,9 @@ static struct class mmc_host_class = { .release = mmc_host_classdev_release, }; +static DEFINE_IDR(mmc_host_idr); +static DEFINE_SPINLOCK(mmc_host_lock); + /* * Internal function. Allocate a new MMC host. */ @@ -261,10 +265,19 @@ struct mmc_host *mmc_alloc_host_sysfs(int extra, struct device *dev) */ int mmc_add_host_sysfs(struct mmc_host *host) { - static unsigned int host_num; + int err; + + if (!idr_pre_get(&mmc_host_idr, GFP_KERNEL)) + return -ENOMEM; + + spin_lock(&mmc_host_lock); + err = idr_get_new(&mmc_host_idr, host, &host->index); + spin_unlock(&mmc_host_lock); + if (err) + return err; snprintf(host->class_dev.class_id, BUS_ID_SIZE, - "mmc%d", host_num++); + "mmc%d", host->index); return class_device_add(&host->class_dev); } @@ -275,6 +288,10 @@ int mmc_add_host_sysfs(struct mmc_host *host) void mmc_remove_host_sysfs(struct mmc_host *host) { class_device_del(&host->class_dev); + + spin_lock(&mmc_host_lock); + idr_remove(&mmc_host_idr, host->index); + spin_unlock(&mmc_host_lock); } /* -- cgit v1.2.1 From 84c3ea01d163a24323d827e1d280dc3346905972 Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Fri, 19 Aug 2005 21:05:56 -0400 Subject: [netdrvr] Convert madgemc to new MCA API. Now that all tms380 devices have a valid struct device with dma_mask, remove dmalimit from tmsdev_init(). Kconfig: depend tms380tr and madgemc on MCA. abyss.c, proteon.c, skisa.c, tmspci.c, tms380tr.h: remove dmalimit parameter from tmsdev_init(). tms380tr.c: use device->dma_mask instead of dmalimit. madgemc.c: move to new MCA API using struct device. Signed-off-by: Jochen Friedrich Signed-off-by: Jeff Garzik --- drivers/net/tokenring/Kconfig | 4 +- drivers/net/tokenring/abyss.c | 2 +- drivers/net/tokenring/madgemc.c | 521 +++++++++++++++++++-------------------- drivers/net/tokenring/proteon.c | 2 +- drivers/net/tokenring/skisa.c | 2 +- drivers/net/tokenring/tms380tr.c | 11 +- drivers/net/tokenring/tms380tr.h | 3 +- drivers/net/tokenring/tmspci.c | 2 +- 8 files changed, 273 insertions(+), 274 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig index 23d0fa4bbceb..7d5c23e8cdd7 100644 --- a/drivers/net/tokenring/Kconfig +++ b/drivers/net/tokenring/Kconfig @@ -84,7 +84,7 @@ config 3C359 config TMS380TR tristate "Generic TMS380 Token Ring ISA/PCI adapter support" - depends on TR && (PCI || ISA) + depends on TR && (PCI || ISA || MCA) select FW_LOADER ---help--- This driver provides generic support for token ring adapters @@ -158,7 +158,7 @@ config ABYSS config MADGEMC tristate "Madge Smart 16/4 Ringnode MicroChannel" - depends on TR && TMS380TR && MCA_LEGACY + depends on TR && TMS380TR && MCA help This tms380 module supports the Madge Smart 16/4 MC16 and MC32 MicroChannel adapters. diff --git a/drivers/net/tokenring/abyss.c b/drivers/net/tokenring/abyss.c index f1e4ef1188e4..9345e68c451e 100644 --- a/drivers/net/tokenring/abyss.c +++ b/drivers/net/tokenring/abyss.c @@ -139,7 +139,7 @@ static int __devinit abyss_attach(struct pci_dev *pdev, const struct pci_device_ */ dev->base_addr += 0x10; - ret = tmsdev_init(dev, PCI_MAX_ADDRESS, &pdev->dev); + ret = tmsdev_init(dev, &pdev->dev); if (ret) { printk("%s: unable to get memory for dev->priv.\n", dev->name); diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c index 659cbdbef7f3..3a25d191ea4a 100644 --- a/drivers/net/tokenring/madgemc.c +++ b/drivers/net/tokenring/madgemc.c @@ -20,7 +20,7 @@ static const char version[] = "madgemc.c: v0.91 23/01/2000 by Adam Fritzler\n"; #include -#include +#include #include #include #include @@ -38,9 +38,7 @@ static const char version[] = "madgemc.c: v0.91 23/01/2000 by Adam Fritzler\n"; #define MADGEMC_IO_EXTENT 32 #define MADGEMC_SIF_OFFSET 0x08 -struct madgemc_card { - struct net_device *dev; - +struct card_info { /* * These are read from the BIA ROM. */ @@ -57,16 +55,12 @@ struct madgemc_card { unsigned int arblevel:4; unsigned int ringspeed:2; /* 0 = 4mb, 1 = 16, 2 = Auto/none */ unsigned int cabletype:1; /* 0 = RJ45, 1 = DB9 */ - - struct madgemc_card *next; }; -static struct madgemc_card *madgemc_card_list; - static int madgemc_open(struct net_device *dev); static int madgemc_close(struct net_device *dev); static int madgemc_chipset_init(struct net_device *dev); -static void madgemc_read_rom(struct madgemc_card *card); +static void madgemc_read_rom(struct net_device *dev, struct card_info *card); static unsigned short madgemc_setnselout_pins(struct net_device *dev); static void madgemc_setcabletype(struct net_device *dev, int type); @@ -151,261 +145,237 @@ static void madgemc_sifwritew(struct net_device *dev, unsigned short val, unsign -static int __init madgemc_probe(void) +static int __devinit madgemc_probe(struct device *device) { static int versionprinted; struct net_device *dev; struct net_local *tp; - struct madgemc_card *card; - int i,slot = 0; - __u8 posreg[4]; - - if (!MCA_bus) - return -1; - - while (slot != MCA_NOTFOUND) { - /* - * Currently we only support the MC16/32 (MCA ID 002d) - */ - slot = mca_find_unused_adapter(0x002d, slot); - if (slot == MCA_NOTFOUND) - break; - - /* - * If we get here, we have an adapter. - */ - if (versionprinted++ == 0) - printk("%s", version); - - dev = alloc_trdev(sizeof(struct net_local)); - if (dev == NULL) { - printk("madgemc: unable to allocate dev space\n"); - if (madgemc_card_list) - return 0; - return -1; - } + struct card_info *card; + struct mca_device *mdev = to_mca_device(device); + int ret = 0, i = 0; + + if (versionprinted++ == 0) + printk("%s", version); + + if(mca_device_claimed(mdev)) + return -EBUSY; + mca_device_set_claim(mdev, 1); + + dev = alloc_trdev(sizeof(struct net_local)); + if (!dev) { + printk("madgemc: unable to allocate dev space\n"); + mca_device_set_claim(mdev, 0); + ret = -ENOMEM; + goto getout; + } - SET_MODULE_OWNER(dev); - dev->dma = 0; + SET_MODULE_OWNER(dev); + dev->dma = 0; - /* - * Fetch MCA config registers - */ - for(i=0;i<4;i++) - posreg[i] = mca_read_stored_pos(slot, i+2); - - card = kmalloc(sizeof(struct madgemc_card), GFP_KERNEL); - if (card==NULL) { - printk("madgemc: unable to allocate card struct\n"); - free_netdev(dev); - if (madgemc_card_list) - return 0; - return -1; - } - card->dev = dev; - - /* - * Parse configuration information. This all comes - * directly from the publicly available @002d.ADF. - * Get it from Madge or your local ADF library. - */ - - /* - * Base address - */ - dev->base_addr = 0x0a20 + - ((posreg[2] & MC16_POS2_ADDR2)?0x0400:0) + - ((posreg[0] & MC16_POS0_ADDR1)?0x1000:0) + - ((posreg[3] & MC16_POS3_ADDR3)?0x2000:0); - - /* - * Interrupt line - */ - switch(posreg[0] >> 6) { /* upper two bits */ + card = kmalloc(sizeof(struct card_info), GFP_KERNEL); + if (card==NULL) { + printk("madgemc: unable to allocate card struct\n"); + ret = -ENOMEM; + goto getout1; + } + + /* + * Parse configuration information. This all comes + * directly from the publicly available @002d.ADF. + * Get it from Madge or your local ADF library. + */ + + /* + * Base address + */ + dev->base_addr = 0x0a20 + + ((mdev->pos[2] & MC16_POS2_ADDR2)?0x0400:0) + + ((mdev->pos[0] & MC16_POS0_ADDR1)?0x1000:0) + + ((mdev->pos[3] & MC16_POS3_ADDR3)?0x2000:0); + + /* + * Interrupt line + */ + switch(mdev->pos[0] >> 6) { /* upper two bits */ case 0x1: dev->irq = 3; break; case 0x2: dev->irq = 9; break; /* IRQ 2 = IRQ 9 */ case 0x3: dev->irq = 10; break; default: dev->irq = 0; break; - } + } - if (dev->irq == 0) { - printk("%s: invalid IRQ\n", dev->name); - goto getout1; - } + if (dev->irq == 0) { + printk("%s: invalid IRQ\n", dev->name); + ret = -EBUSY; + goto getout2; + } - if (!request_region(dev->base_addr, MADGEMC_IO_EXTENT, - "madgemc")) { - printk(KERN_INFO "madgemc: unable to setup Smart MC in slot %d because of I/O base conflict at 0x%04lx\n", slot, dev->base_addr); - dev->base_addr += MADGEMC_SIF_OFFSET; - goto getout1; - } + if (!request_region(dev->base_addr, MADGEMC_IO_EXTENT, + "madgemc")) { + printk(KERN_INFO "madgemc: unable to setup Smart MC in slot %d because of I/O base conflict at 0x%04lx\n", mdev->slot, dev->base_addr); dev->base_addr += MADGEMC_SIF_OFFSET; + ret = -EBUSY; + goto getout2; + } + dev->base_addr += MADGEMC_SIF_OFFSET; + + /* + * Arbitration Level + */ + card->arblevel = ((mdev->pos[0] >> 1) & 0x7) + 8; + + /* + * Burst mode and Fairness + */ + card->burstmode = ((mdev->pos[2] >> 6) & 0x3); + card->fairness = ((mdev->pos[2] >> 4) & 0x1); + + /* + * Ring Speed + */ + if ((mdev->pos[1] >> 2)&0x1) + card->ringspeed = 2; /* not selected */ + else if ((mdev->pos[2] >> 5) & 0x1) + card->ringspeed = 1; /* 16Mb */ + else + card->ringspeed = 0; /* 4Mb */ + + /* + * Cable type + */ + if ((mdev->pos[1] >> 6)&0x1) + card->cabletype = 1; /* STP/DB9 */ + else + card->cabletype = 0; /* UTP/RJ-45 */ + + + /* + * ROM Info. This requires us to actually twiddle + * bits on the card, so we must ensure above that + * the base address is free of conflict (request_region above). + */ + madgemc_read_rom(dev, card); - /* - * Arbitration Level - */ - card->arblevel = ((posreg[0] >> 1) & 0x7) + 8; - - /* - * Burst mode and Fairness - */ - card->burstmode = ((posreg[2] >> 6) & 0x3); - card->fairness = ((posreg[2] >> 4) & 0x1); - - /* - * Ring Speed - */ - if ((posreg[1] >> 2)&0x1) - card->ringspeed = 2; /* not selected */ - else if ((posreg[2] >> 5) & 0x1) - card->ringspeed = 1; /* 16Mb */ - else - card->ringspeed = 0; /* 4Mb */ - - /* - * Cable type - */ - if ((posreg[1] >> 6)&0x1) - card->cabletype = 1; /* STP/DB9 */ - else - card->cabletype = 0; /* UTP/RJ-45 */ - - - /* - * ROM Info. This requires us to actually twiddle - * bits on the card, so we must ensure above that - * the base address is free of conflict (request_region above). - */ - madgemc_read_rom(card); - - if (card->manid != 0x4d) { /* something went wrong */ - printk(KERN_INFO "%s: Madge MC ROM read failed (unknown manufacturer ID %02x)\n", dev->name, card->manid); - goto getout; - } + if (card->manid != 0x4d) { /* something went wrong */ + printk(KERN_INFO "%s: Madge MC ROM read failed (unknown manufacturer ID %02x)\n", dev->name, card->manid); + goto getout3; + } - if ((card->cardtype != 0x08) && (card->cardtype != 0x0d)) { - printk(KERN_INFO "%s: Madge MC ROM read failed (unknown card ID %02x)\n", dev->name, card->cardtype); - goto getout; - } + if ((card->cardtype != 0x08) && (card->cardtype != 0x0d)) { + printk(KERN_INFO "%s: Madge MC ROM read failed (unknown card ID %02x)\n", dev->name, card->cardtype); + ret = -EIO; + goto getout3; + } - /* All cards except Rev 0 and 1 MC16's have 256kb of RAM */ - if ((card->cardtype == 0x08) && (card->cardrev <= 0x01)) - card->ramsize = 128; - else - card->ramsize = 256; - - printk("%s: %s Rev %d at 0x%04lx IRQ %d\n", - dev->name, - (card->cardtype == 0x08)?MADGEMC16_CARDNAME: - MADGEMC32_CARDNAME, card->cardrev, - dev->base_addr, dev->irq); - - if (card->cardtype == 0x0d) - printk("%s: Warning: MC32 support is experimental and highly untested\n", dev->name); - - if (card->ringspeed==2) { /* Unknown */ - printk("%s: Warning: Ring speed not set in POS -- Please run the reference disk and set it!\n", dev->name); - card->ringspeed = 1; /* default to 16mb */ - } + /* All cards except Rev 0 and 1 MC16's have 256kb of RAM */ + if ((card->cardtype == 0x08) && (card->cardrev <= 0x01)) + card->ramsize = 128; + else + card->ramsize = 256; + + printk("%s: %s Rev %d at 0x%04lx IRQ %d\n", + dev->name, + (card->cardtype == 0x08)?MADGEMC16_CARDNAME: + MADGEMC32_CARDNAME, card->cardrev, + dev->base_addr, dev->irq); + + if (card->cardtype == 0x0d) + printk("%s: Warning: MC32 support is experimental and highly untested\n", dev->name); + + if (card->ringspeed==2) { /* Unknown */ + printk("%s: Warning: Ring speed not set in POS -- Please run the reference disk and set it!\n", dev->name); + card->ringspeed = 1; /* default to 16mb */ + } - printk("%s: RAM Size: %dKB\n", dev->name, card->ramsize); + printk("%s: RAM Size: %dKB\n", dev->name, card->ramsize); - printk("%s: Ring Speed: %dMb/sec on %s\n", dev->name, - (card->ringspeed)?16:4, - card->cabletype?"STP/DB9":"UTP/RJ-45"); - printk("%s: Arbitration Level: %d\n", dev->name, - card->arblevel); + printk("%s: Ring Speed: %dMb/sec on %s\n", dev->name, + (card->ringspeed)?16:4, + card->cabletype?"STP/DB9":"UTP/RJ-45"); + printk("%s: Arbitration Level: %d\n", dev->name, + card->arblevel); - printk("%s: Burst Mode: ", dev->name); - switch(card->burstmode) { + printk("%s: Burst Mode: ", dev->name); + switch(card->burstmode) { case 0: printk("Cycle steal"); break; case 1: printk("Limited burst"); break; case 2: printk("Delayed release"); break; case 3: printk("Immediate release"); break; - } - printk(" (%s)\n", (card->fairness)?"Unfair":"Fair"); - - - /* - * Enable SIF before we assign the interrupt handler, - * just in case we get spurious interrupts that need - * handling. - */ - outb(0, dev->base_addr + MC_CONTROL_REG0); /* sanity */ - madgemc_setsifsel(dev, 1); - if (request_irq(dev->irq, madgemc_interrupt, SA_SHIRQ, - "madgemc", dev)) - goto getout; - - madgemc_chipset_init(dev); /* enables interrupts! */ - madgemc_setcabletype(dev, card->cabletype); + } + printk(" (%s)\n", (card->fairness)?"Unfair":"Fair"); - /* Setup MCA structures */ - mca_set_adapter_name(slot, (card->cardtype == 0x08)?MADGEMC16_CARDNAME:MADGEMC32_CARDNAME); - mca_set_adapter_procfn(slot, madgemc_mcaproc, dev); - mca_mark_as_used(slot); - printk("%s: Ring Station Address: ", dev->name); - printk("%2.2x", dev->dev_addr[0]); - for (i = 1; i < 6; i++) - printk(":%2.2x", dev->dev_addr[i]); - printk("\n"); - - /* XXX is ISA_MAX_ADDRESS correct here? */ - if (tmsdev_init(dev, ISA_MAX_ADDRESS, NULL)) { - printk("%s: unable to get memory for dev->priv.\n", - dev->name); - release_region(dev->base_addr-MADGEMC_SIF_OFFSET, - MADGEMC_IO_EXTENT); - - kfree(card); - tmsdev_term(dev); - free_netdev(dev); - if (madgemc_card_list) - return 0; - return -1; - } - tp = netdev_priv(dev); - - /* - * The MC16 is physically a 32bit card. However, Madge - * insists on calling it 16bit, so I'll assume here that - * they know what they're talking about. Cut off DMA - * at 16mb. - */ - tp->setnselout = madgemc_setnselout_pins; - tp->sifwriteb = madgemc_sifwriteb; - tp->sifreadb = madgemc_sifreadb; - tp->sifwritew = madgemc_sifwritew; - tp->sifreadw = madgemc_sifreadw; - tp->DataRate = (card->ringspeed)?SPEED_16:SPEED_4; - - memcpy(tp->ProductID, "Madge MCA 16/4 ", PROD_ID_SIZE + 1); - - dev->open = madgemc_open; - dev->stop = madgemc_close; - - if (register_netdev(dev) == 0) { - /* Enlist in the card list */ - card->next = madgemc_card_list; - madgemc_card_list = card; - slot++; - continue; /* successful, try to find another */ - } - - free_irq(dev->irq, dev); - getout: - release_region(dev->base_addr-MADGEMC_SIF_OFFSET, - MADGEMC_IO_EXTENT); - getout1: - kfree(card); - free_netdev(dev); - slot++; + /* + * Enable SIF before we assign the interrupt handler, + * just in case we get spurious interrupts that need + * handling. + */ + outb(0, dev->base_addr + MC_CONTROL_REG0); /* sanity */ + madgemc_setsifsel(dev, 1); + if (request_irq(dev->irq, madgemc_interrupt, SA_SHIRQ, + "madgemc", dev)) { + ret = -EBUSY; + goto getout3; } - if (madgemc_card_list) + madgemc_chipset_init(dev); /* enables interrupts! */ + madgemc_setcabletype(dev, card->cabletype); + + /* Setup MCA structures */ + mca_device_set_name(mdev, (card->cardtype == 0x08)?MADGEMC16_CARDNAME:MADGEMC32_CARDNAME); + mca_set_adapter_procfn(mdev->slot, madgemc_mcaproc, dev); + + printk("%s: Ring Station Address: ", dev->name); + printk("%2.2x", dev->dev_addr[0]); + for (i = 1; i < 6; i++) + printk(":%2.2x", dev->dev_addr[i]); + printk("\n"); + + if (tmsdev_init(dev, device)) { + printk("%s: unable to get memory for dev->priv.\n", + dev->name); + ret = -ENOMEM; + goto getout4; + } + tp = netdev_priv(dev); + + /* + * The MC16 is physically a 32bit card. However, Madge + * insists on calling it 16bit, so I'll assume here that + * they know what they're talking about. Cut off DMA + * at 16mb. + */ + tp->setnselout = madgemc_setnselout_pins; + tp->sifwriteb = madgemc_sifwriteb; + tp->sifreadb = madgemc_sifreadb; + tp->sifwritew = madgemc_sifwritew; + tp->sifreadw = madgemc_sifreadw; + tp->DataRate = (card->ringspeed)?SPEED_16:SPEED_4; + + memcpy(tp->ProductID, "Madge MCA 16/4 ", PROD_ID_SIZE + 1); + + dev->open = madgemc_open; + dev->stop = madgemc_close; + + tp->tmspriv = card; + dev_set_drvdata(device, dev); + + if (register_netdev(dev) == 0) return 0; - return -1; + + dev_set_drvdata(device, NULL); + ret = -ENOMEM; +getout4: + free_irq(dev->irq, dev); +getout3: + release_region(dev->base_addr-MADGEMC_SIF_OFFSET, + MADGEMC_IO_EXTENT); +getout2: + kfree(card); +getout1: + free_netdev(dev); +getout: + mca_device_set_claim(mdev, 0); + return ret; } /* @@ -664,12 +634,12 @@ static void madgemc_chipset_close(struct net_device *dev) * is complete. * */ -static void madgemc_read_rom(struct madgemc_card *card) +static void madgemc_read_rom(struct net_device *dev, struct card_info *card) { unsigned long ioaddr; unsigned char reg0, reg1, tmpreg0, i; - ioaddr = card->dev->base_addr; + ioaddr = dev->base_addr; reg0 = inb(ioaddr + MC_CONTROL_REG0); reg1 = inb(ioaddr + MC_CONTROL_REG1); @@ -686,9 +656,9 @@ static void madgemc_read_rom(struct madgemc_card *card) outb(tmpreg0 | MC_CONTROL_REG0_PAGE, ioaddr + MC_CONTROL_REG0); /* Read BIA */ - card->dev->addr_len = 6; + dev->addr_len = 6; for (i = 0; i < 6; i++) - card->dev->dev_addr[i] = inb(ioaddr + MC_ROM_BIA_START + i); + dev->dev_addr[i] = inb(ioaddr + MC_ROM_BIA_START + i); /* Restore original register values */ outb(reg0, ioaddr + MC_CONTROL_REG0); @@ -721,14 +691,10 @@ static int madgemc_close(struct net_device *dev) static int madgemc_mcaproc(char *buf, int slot, void *d) { struct net_device *dev = (struct net_device *)d; - struct madgemc_card *curcard = madgemc_card_list; + struct net_local *tp = dev->priv; + struct card_info *curcard = tp->tmspriv; int len = 0; - while (curcard) { /* search for card struct */ - if (curcard->dev == dev) - break; - curcard = curcard->next; - } len += sprintf(buf+len, "-------\n"); if (curcard) { struct net_local *tp = netdev_priv(dev); @@ -763,25 +729,56 @@ static int madgemc_mcaproc(char *buf, int slot, void *d) return len; } -static void __exit madgemc_exit(void) +static int __devexit madgemc_remove(struct device *device) { - struct net_device *dev; - struct madgemc_card *this_card; - - while (madgemc_card_list) { - dev = madgemc_card_list->dev; - unregister_netdev(dev); - release_region(dev->base_addr-MADGEMC_SIF_OFFSET, MADGEMC_IO_EXTENT); - free_irq(dev->irq, dev); - tmsdev_term(dev); - free_netdev(dev); - this_card = madgemc_card_list; - madgemc_card_list = this_card->next; - kfree(this_card); - } + struct net_device *dev = dev_get_drvdata(device); + struct net_local *tp; + struct card_info *card; + + if (!dev) + BUG(); + + tp = dev->priv; + card = tp->tmspriv; + kfree(card); + tp->tmspriv = NULL; + + unregister_netdev(dev); + release_region(dev->base_addr-MADGEMC_SIF_OFFSET, MADGEMC_IO_EXTENT); + free_irq(dev->irq, dev); + tmsdev_term(dev); + free_netdev(dev); + dev_set_drvdata(device, NULL); + + return 0; +} + +static short madgemc_adapter_ids[] __initdata = { + 0x002d, + 0x0000 +}; + +static struct mca_driver madgemc_driver = { + .id_table = madgemc_adapter_ids, + .driver = { + .name = "madgemc", + .bus = &mca_bus_type, + .probe = madgemc_probe, + .remove = __devexit_p(madgemc_remove), + }, +}; + +static int __init madgemc_init (void) +{ + return mca_register_driver (&madgemc_driver); +} + +static void __exit madgemc_exit (void) +{ + mca_unregister_driver (&madgemc_driver); } -module_init(madgemc_probe); +module_init(madgemc_init); module_exit(madgemc_exit); MODULE_LICENSE("GPL"); diff --git a/drivers/net/tokenring/proteon.c b/drivers/net/tokenring/proteon.c index 0a9597738d6c..eb1423ede75c 100644 --- a/drivers/net/tokenring/proteon.c +++ b/drivers/net/tokenring/proteon.c @@ -145,7 +145,7 @@ static int __init setup_card(struct net_device *dev, struct device *pdev) err = -EIO; pdev->dma_mask = &dma_mask; - if (tmsdev_init(dev, ISA_MAX_ADDRESS, pdev)) + if (tmsdev_init(dev, pdev)) goto out4; dev->base_addr &= ~3; diff --git a/drivers/net/tokenring/skisa.c b/drivers/net/tokenring/skisa.c index 03f061941d77..3c7c66204f74 100644 --- a/drivers/net/tokenring/skisa.c +++ b/drivers/net/tokenring/skisa.c @@ -162,7 +162,7 @@ static int __init setup_card(struct net_device *dev, struct device *pdev) err = -EIO; pdev->dma_mask = &dma_mask; - if (tmsdev_init(dev, ISA_MAX_ADDRESS, pdev)) + if (tmsdev_init(dev, pdev)) goto out4; dev->base_addr &= ~3; diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c index 9a543fe2d0e6..2e39bf1f7462 100644 --- a/drivers/net/tokenring/tms380tr.c +++ b/drivers/net/tokenring/tms380tr.c @@ -2333,19 +2333,22 @@ void tmsdev_term(struct net_device *dev) DMA_BIDIRECTIONAL); } -int tmsdev_init(struct net_device *dev, unsigned long dmalimit, - struct device *pdev) +int tmsdev_init(struct net_device *dev, struct device *pdev) { struct net_local *tms_local; memset(dev->priv, 0, sizeof(struct net_local)); tms_local = netdev_priv(dev); init_waitqueue_head(&tms_local->wait_for_tok_int); - tms_local->dmalimit = dmalimit; + if (pdev->dma_mask) + tms_local->dmalimit = *pdev->dma_mask; + else + return -ENOMEM; tms_local->pdev = pdev; tms_local->dmabuffer = dma_map_single(pdev, (void *)tms_local, sizeof(struct net_local), DMA_BIDIRECTIONAL); - if (tms_local->dmabuffer + sizeof(struct net_local) > dmalimit) + if (tms_local->dmabuffer + sizeof(struct net_local) > + tms_local->dmalimit) { printk(KERN_INFO "%s: Memory not accessible for DMA\n", dev->name); diff --git a/drivers/net/tokenring/tms380tr.h b/drivers/net/tokenring/tms380tr.h index 077f568d89d1..30452c67bb68 100644 --- a/drivers/net/tokenring/tms380tr.h +++ b/drivers/net/tokenring/tms380tr.h @@ -17,8 +17,7 @@ int tms380tr_open(struct net_device *dev); int tms380tr_close(struct net_device *dev); irqreturn_t tms380tr_interrupt(int irq, void *dev_id, struct pt_regs *regs); -int tmsdev_init(struct net_device *dev, unsigned long dmalimit, - struct device *pdev); +int tmsdev_init(struct net_device *dev, struct device *pdev); void tmsdev_term(struct net_device *dev); void tms380tr_wait(unsigned long time); diff --git a/drivers/net/tokenring/tmspci.c b/drivers/net/tokenring/tmspci.c index 0014aef5c744..ab47c0547a3b 100644 --- a/drivers/net/tokenring/tmspci.c +++ b/drivers/net/tokenring/tmspci.c @@ -143,7 +143,7 @@ static int __devinit tms_pci_attach(struct pci_dev *pdev, const struct pci_devic printk(":%2.2x", dev->dev_addr[i]); printk("\n"); - ret = tmsdev_init(dev, PCI_MAX_ADDRESS, &pdev->dev); + ret = tmsdev_init(dev, &pdev->dev); if (ret) { printk("%s: unable to get memory for dev->priv.\n", dev->name); goto err_out_irq; -- cgit v1.2.1 From 3d52365c4f62edb9ff9710e1c57952e957b2879f Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Fri, 19 Aug 2005 15:51:46 +0200 Subject: [PATCH] tms380tr: remove prototypes in Space.c Cleanup: remove two prototypes. Signed-off-by: Jochen Friedrich Signed-off-by: Jeff Garzik --- drivers/net/Space.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/Space.c b/drivers/net/Space.c index 11c44becc08f..b28e5fde0b9e 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -318,8 +318,6 @@ static void __init ethif_probe2(int unit) #ifdef CONFIG_TR /* Token-ring device probe */ extern int ibmtr_probe_card(struct net_device *); -extern struct net_device *sk_isa_probe(int unit); -extern struct net_device *proteon_probe(int unit); extern struct net_device *smctr_probe(int unit); static struct devprobe2 tr_probes2[] __initdata = { -- cgit v1.2.1 From e960fc5c7d9144b1ce80dda9891ca7dfc656c078 Mon Sep 17 00:00:00 2001 From: "ravinandan.arakali@neterion.com" Date: Fri, 12 Aug 2005 10:15:59 -0700 Subject: [PATCH] S2io: Hardware fixes for Xframe II adapter Hi, Patch Description: This patch incorporates the following hardware fixes required for Xframe II adapter. 1. New values to program the dtx_control register. 2. Disable memory controller interrupts(MC_INTR) since these are now monitored thru' a poll routine. 3. Don't reset an XframeII card on an ECC double-bit error(It can recover). 4. Save/restore PCI config space before/after a reset irrespective of Xframe I or II card. 5. Bumped up the driver version no. to 2.0.3.1 Please review the patch and apply the same if it looks ok. Signed-off-by: Ravinandan Arakali Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 37 ++++++++++++++++++------------------- 1 file changed, 18 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index e083351e3f42..7ca78228b104 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -67,7 +67,7 @@ /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; -static char s2io_driver_version[] = "Version 2.0.2.1"; +static char s2io_driver_version[] = "Version 2.0.3.1"; static inline int RXD_IS_UP2DT(RxD_t *rxdp) { @@ -210,14 +210,18 @@ static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid) static u64 herc_act_dtx_cfg[] = { /* Set address */ - 0x80000515BA750000ULL, 0x80000515BA7500E0ULL, + 0x8000051536750000ULL, 0x80000515367500E0ULL, /* Write data */ - 0x80000515BA750004ULL, 0x80000515BA7500E4ULL, + 0x8000051536750004ULL, 0x80000515367500E4ULL, /* Set address */ 0x80010515003F0000ULL, 0x80010515003F00E0ULL, /* Write data */ 0x80010515003F0004ULL, 0x80010515003F00E4ULL, /* Set address */ + 0x801205150D440000ULL, 0x801205150D4400E0ULL, + /* Write data */ + 0x801205150D440004ULL, 0x801205150D4400E4ULL, + /* Set address */ 0x80020515F2100000ULL, 0x80020515F21000E0ULL, /* Write data */ 0x80020515F2100004ULL, 0x80020515F21000E4ULL, @@ -1903,7 +1907,7 @@ static int start_nic(struct s2io_nic *nic) } /* Enable select interrupts */ - interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | MC_INTR; + interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; interruptible |= TX_PIC_INTR | RX_PIC_INTR; interruptible |= TX_MAC_INTR | RX_MAC_INTR; @@ -2030,7 +2034,7 @@ static void stop_nic(struct s2io_nic *nic) config = &nic->config; /* Disable all interrupts */ - interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | MC_INTR; + interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; interruptible |= TX_PIC_INTR | RX_PIC_INTR; interruptible |= TX_MAC_INTR | RX_MAC_INTR; en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS); @@ -2688,8 +2692,10 @@ static void alarm_intr_handler(struct s2io_nic *nic) DBG_PRINT(ERR_DBG, "%s: Device indicates ", dev->name); DBG_PRINT(ERR_DBG, "double ECC error!!\n"); - netif_stop_queue(dev); - schedule_work(&nic->rst_timer_task); + if (nic->device_type != XFRAME_II_DEVICE) { + netif_stop_queue(dev); + schedule_work(&nic->rst_timer_task); + } } else { nic->mac_control.stats_info->sw_stat. single_ecc_errs++; @@ -2772,8 +2778,7 @@ void s2io_reset(nic_t * sp) u16 subid, pci_cmd; /* Back up the PCI-X CMD reg, dont want to lose MMRBC, OST settings */ - if (sp->device_type == XFRAME_I_DEVICE) - pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd)); + pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd)); val64 = SW_RESET_ALL; writeq(val64, &bar0->sw_reset); @@ -2792,14 +2797,10 @@ void s2io_reset(nic_t * sp) */ msleep(250); - if (!(sp->device_type & XFRAME_II_DEVICE)) { - /* Restore the PCI state saved during initializarion. */ - pci_restore_state(sp->pdev); - pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, + /* Restore the PCI state saved during initialization. */ + pci_restore_state(sp->pdev); + pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, pci_cmd); - } else { - pci_set_master(sp->pdev); - } s2io_init_pci(sp); msleep(250); @@ -5426,9 +5427,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) INIT_WORK(&sp->set_link_task, (void (*)(void *)) s2io_set_link, sp); - if (!(sp->device_type & XFRAME_II_DEVICE)) { - pci_save_state(sp->pdev); - } + pci_save_state(sp->pdev); /* Setting swapper control on the NIC, for proper reset operation */ if (s2io_set_swapper(sp)) { -- cgit v1.2.1 From 2600636065406dc14948ac2d2913c66c51be80d5 Mon Sep 17 00:00:00 2001 From: Dale Farnsworth Date: Mon, 22 Aug 2005 15:53:29 -0700 Subject: [PATCH] mv643xx: add workaround for HW checksum generation bug [PATCH] [NET] mv643xx: add workaround for HW checksum generation bug The hardware checksum generator on the mv64xxx occasionally generates an incorrect checksum. This patch works around the issue and enables hardware checksum generation. Signed-off-by: Dale Farnsworth Signed-off-by: Jeff Garzik --- drivers/net/mv643xx_eth.c | 29 ++++++++++++++++++----------- drivers/net/mv643xx_eth.h | 4 +++- 2 files changed, 21 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 0405e1f0d3df..fb6b232069d6 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -1157,16 +1157,20 @@ static int mv643xx_eth_start_xmit(struct sk_buff *skb, struct net_device *dev) if (!skb_shinfo(skb)->nr_frags) { linear: if (skb->ip_summed != CHECKSUM_HW) { + /* Errata BTS #50, IHL must be 5 if no HW checksum */ pkt_info.cmd_sts = ETH_TX_ENABLE_INTERRUPT | - ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; + ETH_TX_FIRST_DESC | + ETH_TX_LAST_DESC | + 5 << ETH_TX_IHL_SHIFT; pkt_info.l4i_chk = 0; } else { - u32 ipheader = skb->nh.iph->ihl << 11; pkt_info.cmd_sts = ETH_TX_ENABLE_INTERRUPT | - ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC | - ETH_GEN_TCP_UDP_CHECKSUM | - ETH_GEN_IP_V_4_CHECKSUM | ipheader; + ETH_TX_FIRST_DESC | + ETH_TX_LAST_DESC | + ETH_GEN_TCP_UDP_CHECKSUM | + ETH_GEN_IP_V_4_CHECKSUM | + skb->nh.iph->ihl << ETH_TX_IHL_SHIFT; /* CPU already calculated pseudo header checksum. */ if (skb->nh.iph->protocol == IPPROTO_UDP) { pkt_info.cmd_sts |= ETH_UDP_FRAME; @@ -1193,7 +1197,6 @@ linear: stats->tx_bytes += pkt_info.byte_cnt; } else { unsigned int frag; - u32 ipheader; /* Since hardware can't handle unaligned fragments smaller * than 9 bytes, if we find any, we linearize the skb @@ -1222,12 +1225,16 @@ linear: DMA_TO_DEVICE); pkt_info.l4i_chk = 0; pkt_info.return_info = 0; - pkt_info.cmd_sts = ETH_TX_FIRST_DESC; - if (skb->ip_summed == CHECKSUM_HW) { - ipheader = skb->nh.iph->ihl << 11; - pkt_info.cmd_sts |= ETH_GEN_TCP_UDP_CHECKSUM | - ETH_GEN_IP_V_4_CHECKSUM | ipheader; + if (skb->ip_summed != CHECKSUM_HW) + /* Errata BTS #50, IHL must be 5 if no HW checksum */ + pkt_info.cmd_sts = ETH_TX_FIRST_DESC | + 5 << ETH_TX_IHL_SHIFT; + else { + pkt_info.cmd_sts = ETH_TX_FIRST_DESC | + ETH_GEN_TCP_UDP_CHECKSUM | + ETH_GEN_IP_V_4_CHECKSUM | + skb->nh.iph->ihl << ETH_TX_IHL_SHIFT; /* CPU already calculated pseudo header checksum. */ if (skb->nh.iph->protocol == IPPROTO_UDP) { pkt_info.cmd_sts |= ETH_UDP_FRAME; diff --git a/drivers/net/mv643xx_eth.h b/drivers/net/mv643xx_eth.h index 57c4f8fbfdb6..7678b59c2952 100644 --- a/drivers/net/mv643xx_eth.h +++ b/drivers/net/mv643xx_eth.h @@ -49,7 +49,7 @@ /* Checksum offload for Tx works for most packets, but * fails if previous packet sent did not use hw csum */ -#undef MV643XX_CHECKSUM_OFFLOAD_TX +#define MV643XX_CHECKSUM_OFFLOAD_TX #define MV643XX_NAPI #define MV643XX_TX_FAST_REFILL #undef MV643XX_RX_QUEUE_FILL_ON_TASK /* Does not work, yet */ @@ -217,6 +217,8 @@ #define ETH_TX_ENABLE_INTERRUPT (BIT23) #define ETH_AUTO_MODE (BIT30) +#define ETH_TX_IHL_SHIFT 11 + /* typedefs */ typedef enum _eth_func_ret_status { -- cgit v1.2.1 From 3f3791d30036a367f05b9d0be28ce7ff2e017a5a Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 16 Aug 2005 14:25:38 +0800 Subject: [PATCH] libata: Clear ATA_QCFLAG_ACTIVE flag before calling the completion callback Description: After calling the completion callback, the libata error handler might be running and getting atapi sense data. Clearing the ATA_QCFLAG_ACTIVE flag at this point might interfere with the libata error handler. Changes: - Clear the ATA_QCFLAG_ACTIVE flag before calling the completion callback (and also before the error handler) - Add some comment Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 3544f5d020c6..9a6aacf467b8 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3213,9 +3213,14 @@ void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) ata_sg_clean(qc); + /* atapi: mark qc as inactive to prevent the interrupt handler + * from completing the command twice later, before the error handler + * is called. (when rc != 0 and atapi request sense is needed) + */ + qc->flags &= ~ATA_QCFLAG_ACTIVE; + /* call completion callback */ rc = qc->complete_fn(qc, drv_stat); - qc->flags &= ~ATA_QCFLAG_ACTIVE; /* if callback indicates not to complete command (non-zero), * return immediately -- cgit v1.2.1 From 08b791c02b86e25f456cba64f5f1a1f90326db1d Mon Sep 17 00:00:00 2001 From: Otto Meier Date: Mon, 22 Aug 2005 14:58:57 +0100 Subject: [PATCH] sata_promise: Add PDC40718 id Otto Meier recently submitted a patch to support the PDC40718 chip (marketed as SATA300 TX4, a 4-port SATA controller). Signed-off-by: Otto Meier Signed-off-by: Daniel Drake Signed-off-by: Jeff Garzik --- drivers/scsi/sata_promise.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 5c1d4411457a..0392a7530318 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -181,6 +181,8 @@ static struct pci_device_id pdc_ata_pci_tbl[] = { board_20319 }, { PCI_VENDOR_ID_PROMISE, 0x3319, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20319 }, + { PCI_VENDOR_ID_PROMISE, 0x3d17, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_20319 }, { PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20319 }, -- cgit v1.2.1 From 9309049544935f804b745aa4dea043fb39b2bf2a Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Mon, 22 Aug 2005 14:59:23 +0100 Subject: [PATCH] sata_promise: Add PDC40519 id MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Promise TX4200 is a 4-port SATA controller based on the PDC40519 chip. It meets the description of the 20319, so just a simple ID needs to be added to support this hardware. Thanks to Martin Povolný for testing. Signed-off-by: Daniel Drake Signed-off-by: Jeff Garzik --- drivers/scsi/sata_promise.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 0392a7530318..cc613b3c6ce6 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -181,6 +181,8 @@ static struct pci_device_id pdc_ata_pci_tbl[] = { board_20319 }, { PCI_VENDOR_ID_PROMISE, 0x3319, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20319 }, + { PCI_VENDOR_ID_PROMISE, 0x3519, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_20319 }, { PCI_VENDOR_ID_PROMISE, 0x3d17, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20319 }, { PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0, -- cgit v1.2.1 From c0b34ad2956036cdba87792d6c46d8f491539df1 Mon Sep 17 00:00:00 2001 From: Martin Wilck Date: Thu, 4 Aug 2005 09:04:56 +0200 Subject: [PATCH] Fix HD activity LED with ahci Patch: fix wrong HD activity control by ahci driver The ahci driver 1.0 sets the SActive bit on every transaction, causing the LED to light up. The SActive bit is used only for native command queuing (NCQ) which the current driver version doesn't implement. Resetting the SActive bit is the device's responsibility (by sending a "Set Device Bits FIS" to the host adapter) but this is not required in response to non-NCQ commands, and (most) devices don't. Thus the LED stays always on. This patch fixes the LED behavior. Spec references: http://www.intel.com/technology/serialata/pdf/rev1_1.pdf, sec. 3.3.13, 5.5.1 http://www.serialata.org/docs/serialata10a.pdf http://www.intel.com/design/storage/papers/25266401.pdf Signed-off-by: Martin.Wilck@fujitsu-siemens.com Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 0c79cafb1348..0b228ff67143 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -698,9 +698,6 @@ static int ahci_qc_issue(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; void *port_mmio = (void *) ap->ioaddr.cmd_addr; - writel(1, port_mmio + PORT_SCR_ACT); - readl(port_mmio + PORT_SCR_ACT); /* flush */ - writel(1, port_mmio + PORT_CMD_ISSUE); readl(port_mmio + PORT_CMD_ISSUE); /* flush */ -- cgit v1.2.1 From c1389503710ef4b4e5d21bea284afde19e9619cf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 22 Aug 2005 14:59:24 +0900 Subject: [PATCH] fix atapi_packet_task vs. intr race (take 2) Interrupts from devices sharing the same IRQ could cause ata_host_intr to finish commands being processed by atapi_packet_task if the commands are using ATA_PROT_ATAPI_NODATA or ATA_PROT_ATAPI_DMA protocol. This is because libata interrupt handler is unaware that interrupts are not expected during that period. This patch adds ATA_FLAG_NOINTR flag to tell the interrupt handler that we're not expecting interrupts. Note that once proper HSM is implemented for interrupt-driven PIO, this should be merged into it and this flag will be removed. ahci.c is a different kind of beast, so it's left alone. * The following drivers use ata_qc_issue_prot and ata_interrupt, so changes in libata core will do. ata_piix sata_sil sata_svw sata_via sata_sis sata_uli * The following drivers use ata_qc_issue_prot and custom intr handler. They need this change to work correctly. sata_nv sata_vsc * The following drivers use custom issue function and intr handler. Currently all custom issue functions don't support ATAPI, so this change is irrelevant, updated for consistency and to avoid later mistakes. sata_promise sata_qstor sata_sx4 Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 33 ++++++++++++++++++++++----------- drivers/scsi/sata_nv.c | 3 ++- drivers/scsi/sata_promise.c | 3 ++- drivers/scsi/sata_qstor.c | 6 ++++-- drivers/scsi/sata_sx4.c | 3 ++- drivers/scsi/sata_vsc.c | 3 ++- 6 files changed, 34 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 9a6aacf467b8..c92439fe5dae 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3350,11 +3350,13 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) break; case ATA_PROT_ATAPI_NODATA: + ap->flags |= ATA_FLAG_NOINTR; ata_tf_to_host_nolock(ap, &qc->tf); queue_work(ata_wq, &ap->packet_task); break; case ATA_PROT_ATAPI_DMA: + ap->flags |= ATA_FLAG_NOINTR; ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ ap->ops->bmdma_setup(qc); /* set up bmdma */ queue_work(ata_wq, &ap->packet_task); @@ -3708,7 +3710,8 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) struct ata_port *ap; ap = host_set->ports[i]; - if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) { + if (ap && + !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); @@ -3760,19 +3763,27 @@ static void atapi_packet_task(void *_data) /* send SCSI cdb */ DPRINTK("send cdb\n"); assert(ap->cdb_len >= 12); - ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); - /* if we are DMA'ing, irq handler takes over from here */ - if (qc->tf.protocol == ATA_PROT_ATAPI_DMA) - ap->ops->bmdma_start(qc); /* initiate bmdma */ + if (qc->tf.protocol == ATA_PROT_ATAPI_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_NODATA) { + unsigned long flags; - /* non-data commands are also handled via irq */ - else if (qc->tf.protocol == ATA_PROT_ATAPI_NODATA) { - /* do nothing */ - } + /* Once we're done issuing command and kicking bmdma, + * irq handler takes over. To not lose irq, we need + * to clear NOINTR flag before sending cdb, but + * interrupt handler shouldn't be invoked before we're + * finished. Hence, the following locking. + */ + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags &= ~ATA_FLAG_NOINTR; + ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); + if (qc->tf.protocol == ATA_PROT_ATAPI_DMA) + ap->ops->bmdma_start(qc); /* initiate bmdma */ + spin_unlock_irqrestore(&ap->host_set->lock, flags); + } else { + ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); - /* PIO commands are handled by polling */ - else { + /* PIO commands are handled by polling */ ap->pio_task_state = PIO_ST; queue_work(ata_wq, &ap->pio_task); } diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 9b9142790bd6..41a3421b02b4 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -291,7 +291,8 @@ static irqreturn_t nv_interrupt (int irq, void *dev_instance, struct ata_port *ap; ap = host_set->ports[i]; - if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) { + if (ap && + !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index cc613b3c6ce6..6defd7962359 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -445,7 +445,8 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r VPRINTK("port %u\n", i); ap = host_set->ports[i]; tmp = mask & (1 << (i + 1)); - if (tmp && ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) { + if (tmp && ap && + !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index dca9ed7ac760..08a84042ce09 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -386,7 +386,8 @@ static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set) DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n", sff1, sff0, port_no, sHST, sDST); handled = 1; - if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) { + if (ap && !(ap->flags & + (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; struct qs_port_priv *pp = ap->private_data; if (!pp || pp->state != qs_state_pkt) @@ -417,7 +418,8 @@ static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set) for (port_no = 0; port_no < host_set->n_ports; ++port_no) { struct ata_port *ap; ap = host_set->ports[port_no]; - if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) { + if (ap && + !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; struct qs_port_priv *pp = ap->private_data; if (!pp || pp->state != qs_state_mmio) diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 76644ea62d67..e2db499f22dd 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -825,7 +825,8 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_re ap = host_set->ports[port_no]; tmp = mask & (1 << i); VPRINTK("seq %u, port_no %u, ap %p, tmp %x\n", i, port_no, ap, tmp); - if (tmp && ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) { + if (tmp && ap && + !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index cb3a6d89cf00..6f2562171be0 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -173,7 +173,8 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, struct ata_port *ap; ap = host_set->ports[i]; - if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) { + if (ap && !(ap->flags & + (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); -- cgit v1.2.1 From 40e8c82c74b9be793601e098fd1313bc2632c5dc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 22 Aug 2005 17:12:45 +0900 Subject: [PATCH] libata: implement ata_poll_qc_complete and use it in polling functions [PATCH libata-dev-2.6:upstream] implement ata_poll_qc_complete and use it in polling functions Previously, libata polling functions turned irq back on and completed qc commands without holding host lock. This creates a race condition between the polling task and interrupts from other ports on the same host set or spurious interrupt from itself. This patch implements ata_poll_qc_complete which enables irq and completes qc atomically and convert all polling functions. Note: atapi_packet_task() didn't use to turn irq back on or clear ATA_FLAG_NOINTR on error exits. This patch makes it use ata_poll_qc_complete which does both. Note: With this change, ALL invocations of ata_qc_complete() are now done under host_set lock. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 34 ++++++++++++++++++++++++---------- 1 file changed, 24 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index c92439fe5dae..2f68563ac3a3 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2401,6 +2401,26 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) return 0; } +/** + * ata_poll_qc_complete - turn irq back on and finish qc + * @qc: Command to complete + * @drv_stat: ATA status register content + * + * LOCKING: + * None. (grabs host lock) + */ + +void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) +{ + struct ata_port *ap = qc->ap; + + spin_lock_irq(&ap->host_set->lock); + ap->flags &= ~ATA_FLAG_NOINTR; + ata_irq_on(ap); + ata_qc_complete(qc, drv_stat); + spin_unlock_irq(&ap->host_set->lock); +} + /** * ata_pio_poll - * @ap: @@ -2492,9 +2512,7 @@ static void ata_pio_complete (struct ata_port *ap) ap->pio_task_state = PIO_ST_IDLE; - ata_irq_on(ap); - - ata_qc_complete(qc, drv_stat); + ata_poll_qc_complete(qc, drv_stat); } @@ -2844,9 +2862,7 @@ static void ata_pio_block(struct ata_port *ap) if ((status & ATA_DRQ) == 0) { ap->pio_task_state = PIO_ST_IDLE; - ata_irq_on(ap); - - ata_qc_complete(qc, status); + ata_poll_qc_complete(qc, status); return; } @@ -2876,9 +2892,7 @@ static void ata_pio_error(struct ata_port *ap) ap->pio_task_state = PIO_ST_IDLE; - ata_irq_on(ap); - - ata_qc_complete(qc, drv_stat | ATA_ERR); + ata_poll_qc_complete(qc, drv_stat | ATA_ERR); } static void ata_pio_task(void *_data) @@ -3791,7 +3805,7 @@ static void atapi_packet_task(void *_data) return; err_out: - ata_qc_complete(qc, ATA_ERR); + ata_poll_qc_complete(qc, ATA_ERR); } -- cgit v1.2.1 From e4deec6304cbd5fd08bf573eccc68787945071c2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 23 Aug 2005 07:27:25 +0900 Subject: [PATCH] sil: apply M15W quirk selectively (take 2) As SII reports that only original 3112's are affected by M15W quirk, This patch adds SIL_FLAG_MOD15WRITE to selectively apply M15W quirk depending on chipsets. As of yet, we don't know exactly which PCI IDs are for original 3112, so M15W quirk is applied to all except for 3512 and 3124. Once more info is avaliable, we can change some of these sil_3112_m15w's to sil_3112. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index a1b81d43b11f..e6902645f397 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -41,8 +41,11 @@ #define DRV_VERSION "0.9" enum { + SIL_FLAG_MOD15WRITE = (1 << 30), + sil_3112 = 0, - sil_3114 = 1, + sil_3112_m15w = 1, + sil_3114 = 2, SIL_FIFO_R0 = 0x40, SIL_FIFO_W0 = 0x41, @@ -76,13 +79,13 @@ static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static void sil_post_set_mode (struct ata_port *ap); static struct pci_device_id sil_pci_tbl[] = { - { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, - { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, + { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 }, - { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, - { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, - { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, + { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, + { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, { } /* terminate list */ }; @@ -174,6 +177,16 @@ static struct ata_port_info sil_port_info[] = { .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ .port_ops = &sil_ops, + }, /* sil_3112_15w - keep it sync'd w/ sil_3112 */ + { + .sht = &sil_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SRST | ATA_FLAG_MMIO | + SIL_FLAG_MOD15WRITE, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil_ops, }, /* sil_3114 */ { .sht = &sil_sht, @@ -331,7 +344,7 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) } /* limit requests to 15 sectors */ - if (quirks & SIL_QUIRK_MOD15WRITE) { + if ((ap->flags & SIL_FLAG_MOD15WRITE) && (quirks & SIL_QUIRK_MOD15WRITE)) { printk(KERN_INFO "ata%u(%u): applying Seagate errata fix\n", ap->id, dev->devno); ap->host->max_sectors = 15; -- cgit v1.2.1 From efcce839360fb3a7b6dedeacaec80f68b0f2d052 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Sat, 20 Aug 2005 15:53:22 +1000 Subject: [PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain Acked-by: Thomas Bogendoerfer Signed-off-by: Jeff Garzik --- drivers/net/Space.c | 4 - drivers/net/jazzsonic.c | 186 ++++++------- drivers/net/macsonic.c | 538 +++++++++++++++++++------------------- drivers/net/sonic.c | 676 +++++++++++++++++++++++++++++------------------- drivers/net/sonic.h | 460 +++++++++++++++----------------- 5 files changed, 972 insertions(+), 892 deletions(-) (limited to 'drivers') diff --git a/drivers/net/Space.c b/drivers/net/Space.c index b28e5fde0b9e..60304f7e7e5b 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -87,7 +87,6 @@ extern struct net_device *mvme147lance_probe(int unit); extern struct net_device *tc515_probe(int unit); extern struct net_device *lance_probe(int unit); extern struct net_device *mace_probe(int unit); -extern struct net_device *macsonic_probe(int unit); extern struct net_device *mac8390_probe(int unit); extern struct net_device *mac89x0_probe(int unit); extern struct net_device *mc32_probe(int unit); @@ -284,9 +283,6 @@ static struct devprobe2 m68k_probes[] __initdata = { #ifdef CONFIG_MACMACE /* Mac 68k Quadra AV builtin Ethernet */ {mace_probe, 0}, #endif -#ifdef CONFIG_MACSONIC /* Mac SONIC-based Ethernet of all sorts */ - {macsonic_probe, 0}, -#endif #ifdef CONFIG_MAC8390 /* NuBus NS8390-based cards */ {mac8390_probe, 0}, #endif diff --git a/drivers/net/jazzsonic.c b/drivers/net/jazzsonic.c index 7fec613e1675..8423cb6875f0 100644 --- a/drivers/net/jazzsonic.c +++ b/drivers/net/jazzsonic.c @@ -1,5 +1,10 @@ /* - * sonic.c + * jazzsonic.c + * + * (C) 2005 Finn Thain + * + * Converted to DMA API, and (from the mac68k project) introduced + * dhd's support for 16-bit cards. * * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de) * @@ -28,8 +33,8 @@ #include #include #include -#include #include +#include #include #include @@ -44,22 +49,20 @@ static struct platform_device *jazz_sonic_device; #define SONIC_MEM_SIZE 0x100 -#define SREGS_PAD(n) u16 n; - #include "sonic.h" /* * Macros to access SONIC registers */ -#define SONIC_READ(reg) (*((volatile unsigned int *)base_addr+reg)) +#define SONIC_READ(reg) (*((volatile unsigned int *)dev->base_addr+reg)) #define SONIC_WRITE(reg,val) \ do { \ - *((volatile unsigned int *)base_addr+(reg)) = (val); \ + *((volatile unsigned int *)dev->base_addr+(reg)) = (val); \ } while (0) -/* use 0 for production, 1 for verification, >2 for debug */ +/* use 0 for production, 1 for verification, >1 for debug */ #ifdef SONIC_DEBUG static unsigned int sonic_debug = SONIC_DEBUG; #else @@ -85,18 +88,18 @@ static unsigned short known_revisions[] = 0xffff /* end of list */ }; -static int __init sonic_probe1(struct net_device *dev, unsigned long base_addr, - unsigned int irq) +static int __init sonic_probe1(struct net_device *dev) { static unsigned version_printed; unsigned int silicon_revision; unsigned int val; - struct sonic_local *lp; + struct sonic_local *lp = netdev_priv(dev); int err = -ENODEV; int i; - if (!request_mem_region(base_addr, SONIC_MEM_SIZE, jazz_sonic_string)) + if (!request_mem_region(dev->base_addr, SONIC_MEM_SIZE, jazz_sonic_string)) return -EBUSY; + /* * get the Silicon Revision ID. If this is one of the known * one assume that we found a SONIC ethernet controller at @@ -120,11 +123,7 @@ static int __init sonic_probe1(struct net_device *dev, unsigned long base_addr, if (sonic_debug && version_printed++ == 0) printk(version); - printk("%s: Sonic ethernet found at 0x%08lx, ", dev->name, base_addr); - - /* Fill in the 'dev' fields. */ - dev->base_addr = base_addr; - dev->irq = irq; + printk(KERN_INFO "%s: Sonic ethernet found at 0x%08lx, ", lp->device->bus_id, dev->base_addr); /* * Put the sonic into software reset, then @@ -138,84 +137,44 @@ static int __init sonic_probe1(struct net_device *dev, unsigned long base_addr, dev->dev_addr[i*2+1] = val >> 8; } - printk("HW Address "); - for (i = 0; i < 6; i++) { - printk("%2.2x", dev->dev_addr[i]); - if (i<5) - printk(":"); - } - - printk(" IRQ %d\n", irq); - err = -ENOMEM; /* Initialize the device structure. */ - if (dev->priv == NULL) { - /* - * the memory be located in the same 64kb segment - */ - lp = NULL; - i = 0; - do { - lp = kmalloc(sizeof(*lp), GFP_KERNEL); - if ((unsigned long) lp >> 16 - != ((unsigned long)lp + sizeof(*lp) ) >> 16) { - /* FIXME, free the memory later */ - kfree(lp); - lp = NULL; - } - } while (lp == NULL && i++ < 20); - - if (lp == NULL) { - printk("%s: couldn't allocate memory for descriptors\n", - dev->name); - goto out; - } - memset(lp, 0, sizeof(struct sonic_local)); - - /* get the virtual dma address */ - lp->cda_laddr = vdma_alloc(CPHYSADDR(lp),sizeof(*lp)); - if (lp->cda_laddr == ~0UL) { - printk("%s: couldn't get DMA page entry for " - "descriptors\n", dev->name); - goto out1; - } - - lp->tda_laddr = lp->cda_laddr + sizeof (lp->cda); - lp->rra_laddr = lp->tda_laddr + sizeof (lp->tda); - lp->rda_laddr = lp->rra_laddr + sizeof (lp->rra); - - /* allocate receive buffer area */ - /* FIXME, maybe we should use skbs */ - lp->rba = kmalloc(SONIC_NUM_RRS * SONIC_RBSIZE, GFP_KERNEL); - if (!lp->rba) { - printk("%s: couldn't allocate receive buffers\n", - dev->name); - goto out2; - } + lp->dma_bitmode = SONIC_BITMODE32; - /* get virtual dma address */ - lp->rba_laddr = vdma_alloc(CPHYSADDR(lp->rba), - SONIC_NUM_RRS * SONIC_RBSIZE); - if (lp->rba_laddr == ~0UL) { - printk("%s: couldn't get DMA page entry for receive " - "buffers\n",dev->name); - goto out3; - } - - /* now convert pointer to KSEG1 pointer */ - lp->rba = (char *)KSEG1ADDR(lp->rba); - flush_cache_all(); - dev->priv = (struct sonic_local *)KSEG1ADDR(lp); + /* Allocate the entire chunk of memory for the descriptors. + Note that this cannot cross a 64K boundary. */ + if ((lp->descriptors = dma_alloc_coherent(lp->device, + SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + &lp->descriptors_laddr, GFP_KERNEL)) == NULL) { + printk(KERN_ERR "%s: couldn't alloc DMA memory for descriptors.\n", lp->device->bus_id); + goto out; } - lp = (struct sonic_local *)dev->priv; + /* Now set up the pointers to point to the appropriate places */ + lp->cda = lp->descriptors; + lp->tda = lp->cda + (SIZEOF_SONIC_CDA + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + + lp->cda_laddr = lp->descriptors_laddr; + lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + dev->open = sonic_open; dev->stop = sonic_close; dev->hard_start_xmit = sonic_send_packet; - dev->get_stats = sonic_get_stats; + dev->get_stats = sonic_get_stats; dev->set_multicast_list = &sonic_multicast_list; + dev->tx_timeout = sonic_tx_timeout; dev->watchdog_timeo = TX_TIMEOUT; /* @@ -226,14 +185,8 @@ static int __init sonic_probe1(struct net_device *dev, unsigned long base_addr, SONIC_WRITE(SONIC_MPT,0xffff); return 0; -out3: - kfree(lp->rba); -out2: - vdma_free(lp->cda_laddr); -out1: - kfree(lp); out: - release_region(base_addr, SONIC_MEM_SIZE); + release_region(dev->base_addr, SONIC_MEM_SIZE); return err; } @@ -245,7 +198,6 @@ static int __init jazz_sonic_probe(struct device *device) { struct net_device *dev; struct sonic_local *lp; - unsigned long base_addr; int err = 0; int i; @@ -255,21 +207,26 @@ static int __init jazz_sonic_probe(struct device *device) if (mips_machgroup != MACH_GROUP_JAZZ) return -ENODEV; - dev = alloc_etherdev(0); + dev = alloc_etherdev(sizeof(struct sonic_local)); if (!dev) return -ENOMEM; + lp = netdev_priv(dev); + lp->device = device; + SET_NETDEV_DEV(dev, device); + SET_MODULE_OWNER(dev); + netdev_boot_setup_check(dev); - base_addr = dev->base_addr; - if (base_addr >= KSEG0) { /* Check a single specified location. */ - err = sonic_probe1(dev, base_addr, dev->irq); - } else if (base_addr != 0) { /* Don't probe at all. */ + if (dev->base_addr >= KSEG0) { /* Check a single specified location. */ + err = sonic_probe1(dev); + } else if (dev->base_addr != 0) { /* Don't probe at all. */ err = -ENXIO; } else { for (i = 0; sonic_portlist[i].port; i++) { - int io = sonic_portlist[i].port; - if (sonic_probe1(dev, io, sonic_portlist[i].irq) == 0) + dev->base_addr = sonic_portlist[i].port; + dev->irq = sonic_portlist[i].irq; + if (sonic_probe1(dev) == 0) break; } if (!sonic_portlist[i].port) @@ -281,14 +238,17 @@ static int __init jazz_sonic_probe(struct device *device) if (err) goto out1; + printk("%s: MAC ", dev->name); + for (i = 0; i < 6; i++) { + printk("%2.2x", dev->dev_addr[i]); + if (i < 5) + printk(":"); + } + printk(" IRQ %d\n", dev->irq); + return 0; out1: - lp = dev->priv; - vdma_free(lp->rba_laddr); - kfree(lp->rba); - vdma_free(lp->cda_laddr); - kfree(lp); release_region(dev->base_addr, SONIC_MEM_SIZE); out: free_netdev(dev); @@ -296,21 +256,22 @@ out: return err; } -/* - * SONIC uses a normal IRQ - */ -#define sonic_request_irq request_irq -#define sonic_free_irq free_irq +MODULE_DESCRIPTION("Jazz SONIC ethernet driver"); +module_param(sonic_debug, int, 0); +MODULE_PARM_DESC(sonic_debug, "jazzsonic debug level (1-4)"); -#define sonic_chiptomem(x) KSEG1ADDR(vdma_log2phys(x)) +#define SONIC_IRQ_FLAG SA_INTERRUPT #include "sonic.c" static int __devexit jazz_sonic_device_remove (struct device *device) { struct net_device *dev = device->driver_data; + struct sonic_local* lp = netdev_priv(dev); unregister_netdev (dev); + dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + lp->descriptors, lp->descriptors_laddr); release_region (dev->base_addr, SONIC_MEM_SIZE); free_netdev (dev); @@ -323,7 +284,7 @@ static struct device_driver jazz_sonic_driver = { .probe = jazz_sonic_probe, .remove = __devexit_p(jazz_sonic_device_remove), }; - + static void jazz_sonic_platform_release (struct device *device) { struct platform_device *pldev; @@ -336,10 +297,11 @@ static void jazz_sonic_platform_release (struct device *device) static int __init jazz_sonic_init_module(void) { struct platform_device *pldev; + int err; - if (driver_register(&jazz_sonic_driver)) { + if ((err = driver_register(&jazz_sonic_driver))) { printk(KERN_ERR "Driver registration failed\n"); - return -ENOMEM; + return err; } jazz_sonic_device = NULL; diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c index be28c65de729..405e18365ede 100644 --- a/drivers/net/macsonic.c +++ b/drivers/net/macsonic.c @@ -1,6 +1,12 @@ /* * macsonic.c * + * (C) 2005 Finn Thain + * + * Converted to DMA API, converted to unified driver model, made it work as + * a module again, and from the mac68k project, introduced more 32-bit cards + * and dhd's support for 16-bit cards. + * * (C) 1998 Alan Cox * * Debugging Andreas Ehliar, Michael Schmitz @@ -26,8 +32,8 @@ */ #include +#include #include -#include #include #include #include @@ -41,8 +47,8 @@ #include #include #include -#include -#include +#include +#include #include #include @@ -54,25 +60,28 @@ #include #include -#define SREGS_PAD(n) u16 n; +static char mac_sonic_string[] = "macsonic"; +static struct platform_device *mac_sonic_device; #include "sonic.h" -#define SONIC_READ(reg) \ - nubus_readl(base_addr+(reg)) -#define SONIC_WRITE(reg,val) \ - nubus_writel((val), base_addr+(reg)) -#define sonic_read(dev, reg) \ - nubus_readl((dev)->base_addr+(reg)) -#define sonic_write(dev, reg, val) \ - nubus_writel((val), (dev)->base_addr+(reg)) - +/* These should basically be bus-size and endian independent (since + the SONIC is at least smart enough that it uses the same endianness + as the host, unlike certain less enlightened Macintosh NICs) */ +#define SONIC_READ(reg) (nubus_readw(dev->base_addr + (reg * 4) \ + + lp->reg_offset)) +#define SONIC_WRITE(reg,val) (nubus_writew(val, dev->base_addr + (reg * 4) \ + + lp->reg_offset)) + +/* use 0 for production, 1 for verification, >1 for debug */ +#ifdef SONIC_DEBUG +static unsigned int sonic_debug = SONIC_DEBUG; +#else +static unsigned int sonic_debug = 1; +#endif -static int sonic_debug; static int sonic_version_printed; -static int reg_offset; - extern int mac_onboard_sonic_probe(struct net_device* dev); extern int mac_nubus_sonic_probe(struct net_device* dev); @@ -108,40 +117,6 @@ enum macsonic_type { #define SONIC_READ_PROM(addr) nubus_readb(prom_addr+addr) -struct net_device * __init macsonic_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(0); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - if (unit >= 0) - sprintf(dev->name, "eth%d", unit); - - SET_MODULE_OWNER(dev); - - /* This will catch fatal stuff like -ENOMEM as well as success */ - err = mac_onboard_sonic_probe(dev); - if (err == 0) - goto found; - if (err != -ENODEV) - goto out; - err = mac_nubus_sonic_probe(dev); - if (err) - goto out; -found: - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - kfree(dev->priv); -out: - free_netdev(dev); - return ERR_PTR(err); -} - /* * For reversing the PROM address */ @@ -160,103 +135,55 @@ static inline void bit_reverse_addr(unsigned char addr[6]) int __init macsonic_init(struct net_device* dev) { - struct sonic_local* lp = NULL; - int i; + struct sonic_local* lp = netdev_priv(dev); /* Allocate the entire chunk of memory for the descriptors. Note that this cannot cross a 64K boundary. */ - for (i = 0; i < 20; i++) { - unsigned long desc_base, desc_top; - if((lp = kmalloc(sizeof(struct sonic_local), GFP_KERNEL | GFP_DMA)) == NULL) { - printk(KERN_ERR "%s: couldn't allocate descriptor buffers\n", dev->name); - return -ENOMEM; - } - - desc_base = (unsigned long) lp; - desc_top = desc_base + sizeof(struct sonic_local); - if ((desc_top & 0xffff) >= (desc_base & 0xffff)) - break; - /* Hmm. try again (FIXME: does this actually work?) */ - kfree(lp); - printk(KERN_DEBUG - "%s: didn't get continguous chunk [%08lx - %08lx], trying again\n", - dev->name, desc_base, desc_top); - } - - if (lp == NULL) { - printk(KERN_ERR "%s: tried 20 times to allocate descriptor buffers, giving up.\n", - dev->name); + if ((lp->descriptors = dma_alloc_coherent(lp->device, + SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + &lp->descriptors_laddr, GFP_KERNEL)) == NULL) { + printk(KERN_ERR "%s: couldn't alloc DMA memory for descriptors.\n", lp->device->bus_id); return -ENOMEM; - } - - dev->priv = lp; - -#if 0 - /* this code is only here as a curiousity... mainly, where the - fuck did SONIC_BUS_SCALE come from, and what was it supposed - to do? the normal allocation works great for 32 bit stuffs.. */ + } /* Now set up the pointers to point to the appropriate places */ - lp->cda = lp->sonic_desc; - lp->tda = lp->cda + (SIZEOF_SONIC_CDA * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->cda = lp->descriptors; + lp->tda = lp->cda + (SIZEOF_SONIC_CDA + * SONIC_BUS_SCALE(lp->dma_bitmode)); lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS - * SONIC_BUS_SCALE(lp->dma_bitmode)); + * SONIC_BUS_SCALE(lp->dma_bitmode)); lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS - * SONIC_BUS_SCALE(lp->dma_bitmode)); + * SONIC_BUS_SCALE(lp->dma_bitmode)); -#endif - - memset(lp, 0, sizeof(struct sonic_local)); - - lp->cda_laddr = (unsigned int)&(lp->cda); - lp->tda_laddr = (unsigned int)lp->tda; - lp->rra_laddr = (unsigned int)lp->rra; - lp->rda_laddr = (unsigned int)lp->rda; - - /* FIXME, maybe we should use skbs */ - if ((lp->rba = (char *) - kmalloc(SONIC_NUM_RRS * SONIC_RBSIZE, GFP_KERNEL | GFP_DMA)) == NULL) { - printk(KERN_ERR "%s: couldn't allocate receive buffers\n", dev->name); - dev->priv = NULL; - kfree(lp); - return -ENOMEM; - } - - lp->rba_laddr = (unsigned int)lp->rba; - - { - int rs, ds; - - /* almost always 12*4096, but let's not take chances */ - rs = ((SONIC_NUM_RRS * SONIC_RBSIZE + 4095) / 4096) * 4096; - /* almost always under a page, but let's not take chances */ - ds = ((sizeof(struct sonic_local) + 4095) / 4096) * 4096; - kernel_set_cachemode(lp->rba, rs, IOMAP_NOCACHE_SER); - kernel_set_cachemode(lp, ds, IOMAP_NOCACHE_SER); - } - -#if 0 - flush_cache_all(); -#endif + lp->cda_laddr = lp->descriptors_laddr; + lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); dev->open = sonic_open; dev->stop = sonic_close; dev->hard_start_xmit = sonic_send_packet; dev->get_stats = sonic_get_stats; dev->set_multicast_list = &sonic_multicast_list; + dev->tx_timeout = sonic_tx_timeout; + dev->watchdog_timeo = TX_TIMEOUT; /* * clear tally counter */ - sonic_write(dev, SONIC_CRCT, 0xffff); - sonic_write(dev, SONIC_FAET, 0xffff); - sonic_write(dev, SONIC_MPT, 0xffff); + SONIC_WRITE(SONIC_CRCT, 0xffff); + SONIC_WRITE(SONIC_FAET, 0xffff); + SONIC_WRITE(SONIC_MPT, 0xffff); return 0; } int __init mac_onboard_sonic_ethernet_addr(struct net_device* dev) { + struct sonic_local *lp = netdev_priv(dev); const int prom_addr = ONBOARD_SONIC_PROM_BASE; int i; @@ -270,6 +197,7 @@ int __init mac_onboard_sonic_ethernet_addr(struct net_device* dev) why this is so. */ if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && + memcmp(dev->dev_addr, "\x00\x80\x19", 3) && memcmp(dev->dev_addr, "\x00\x05\x02", 3)) bit_reverse_addr(dev->dev_addr); else @@ -281,22 +209,23 @@ int __init mac_onboard_sonic_ethernet_addr(struct net_device* dev) the card... */ if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && + memcmp(dev->dev_addr, "\x00\x80\x19", 3) && memcmp(dev->dev_addr, "\x00\x05\x02", 3)) { unsigned short val; printk(KERN_INFO "macsonic: PROM seems to be wrong, trying CAM entry 15\n"); - sonic_write(dev, SONIC_CMD, SONIC_CR_RST); - sonic_write(dev, SONIC_CEP, 15); + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + SONIC_WRITE(SONIC_CEP, 15); - val = sonic_read(dev, SONIC_CAP2); + val = SONIC_READ(SONIC_CAP2); dev->dev_addr[5] = val >> 8; dev->dev_addr[4] = val & 0xff; - val = sonic_read(dev, SONIC_CAP1); + val = SONIC_READ(SONIC_CAP1); dev->dev_addr[3] = val >> 8; dev->dev_addr[2] = val & 0xff; - val = sonic_read(dev, SONIC_CAP0); + val = SONIC_READ(SONIC_CAP0); dev->dev_addr[1] = val >> 8; dev->dev_addr[0] = val & 0xff; @@ -311,6 +240,7 @@ int __init mac_onboard_sonic_ethernet_addr(struct net_device* dev) if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && + memcmp(dev->dev_addr, "\x00\x80\x19", 3) && memcmp(dev->dev_addr, "\x00\x05\x02", 3)) { /* @@ -325,8 +255,9 @@ int __init mac_onboard_sonic_probe(struct net_device* dev) { /* Bwahahaha */ static int once_is_more_than_enough; - int i; - int dma_bitmode; + struct sonic_local* lp = netdev_priv(dev); + int sr; + int commslot = 0; if (once_is_more_than_enough) return -ENODEV; @@ -335,20 +266,18 @@ int __init mac_onboard_sonic_probe(struct net_device* dev) if (!MACH_IS_MAC) return -ENODEV; - printk(KERN_INFO "Checking for internal Macintosh ethernet (SONIC).. "); - if (macintosh_config->ether_type != MAC_ETHER_SONIC) - { - printk("none.\n"); return -ENODEV; - } - + + printk(KERN_INFO "Checking for internal Macintosh ethernet (SONIC).. "); + /* Bogus probing, on the models which may or may not have Ethernet (BTW, the Ethernet *is* always at the same address, and nothing else lives there, at least if Apple's documentation is to be believed) */ if (macintosh_config->ident == MAC_MODEL_Q630 || macintosh_config->ident == MAC_MODEL_P588 || + macintosh_config->ident == MAC_MODEL_P575 || macintosh_config->ident == MAC_MODEL_C610) { unsigned long flags; int card_present; @@ -361,13 +290,13 @@ int __init mac_onboard_sonic_probe(struct net_device* dev) printk("none.\n"); return -ENODEV; } + commslot = 1; } printk("yes\n"); - /* Danger! My arms are flailing wildly! You *must* set this - before using sonic_read() */ - + /* Danger! My arms are flailing wildly! You *must* set lp->reg_offset + * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */ dev->base_addr = ONBOARD_SONIC_REGISTERS; if (via_alt_mapping) dev->irq = IRQ_AUTO_3; @@ -379,84 +308,66 @@ int __init mac_onboard_sonic_probe(struct net_device* dev) sonic_version_printed = 1; } printk(KERN_INFO "%s: onboard / comm-slot SONIC at 0x%08lx\n", - dev->name, dev->base_addr); - - /* Now do a song and dance routine in an attempt to determine - the bus width */ + lp->device->bus_id, dev->base_addr); /* The PowerBook's SONIC is 16 bit always. */ if (macintosh_config->ident == MAC_MODEL_PB520) { - reg_offset = 0; - dma_bitmode = 0; - } else if (macintosh_config->ident == MAC_MODEL_C610) { - reg_offset = 0; - dma_bitmode = 1; - } else { + lp->reg_offset = 0; + lp->dma_bitmode = SONIC_BITMODE16; + sr = SONIC_READ(SONIC_SR); + } else if (commslot) { /* Some of the comm-slot cards are 16 bit. But some - of them are not. The 32-bit cards use offset 2 and - pad with zeroes or sometimes ones (I think...) - Therefore, if we try offset 0 and get a silicon - revision of 0, we assume 16 bit. */ - int sr; - - /* Technically this is not necessary since we zeroed - it above */ - reg_offset = 0; - dma_bitmode = 0; - sr = sonic_read(dev, SONIC_SR); - if (sr == 0 || sr == 0xffff) { - reg_offset = 2; - /* 83932 is 0x0004, 83934 is 0x0100 or 0x0101 */ - sr = sonic_read(dev, SONIC_SR); - dma_bitmode = 1; - + of them are not. The 32-bit cards use offset 2 and + have known revisions, we try reading the revision + register at offset 2, if we don't get a known revision + we assume 16 bit at offset 0. */ + lp->reg_offset = 2; + lp->dma_bitmode = SONIC_BITMODE16; + + sr = SONIC_READ(SONIC_SR); + if (sr == 0x0004 || sr == 0x0006 || sr == 0x0100 || sr == 0x0101) + /* 83932 is 0x0004 or 0x0006, 83934 is 0x0100 or 0x0101 */ + lp->dma_bitmode = SONIC_BITMODE32; + else { + lp->dma_bitmode = SONIC_BITMODE16; + lp->reg_offset = 0; + sr = SONIC_READ(SONIC_SR); } - printk(KERN_INFO - "%s: revision 0x%04x, using %d bit DMA and register offset %d\n", - dev->name, sr, dma_bitmode?32:16, reg_offset); + } else { + /* All onboard cards are at offset 2 with 32 bit DMA. */ + lp->reg_offset = 2; + lp->dma_bitmode = SONIC_BITMODE32; + sr = SONIC_READ(SONIC_SR); } - + printk(KERN_INFO + "%s: revision 0x%04x, using %d bit DMA and register offset %d\n", + lp->device->bus_id, sr, lp->dma_bitmode?32:16, lp->reg_offset); - /* this carries my sincere apologies -- by the time I got to updating - the driver, support for "reg_offsets" appeares nowhere in the sonic - code, going back for over a year. Fortunately, my Mac does't seem - to use whatever this was. +#if 0 /* This is sometimes useful to find out how MacOS configured the card. */ + printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", lp->device->bus_id, + SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff); +#endif - If you know how this is supposed to be implemented, either fix it, - or contact me (sammy@oh.verio.com) to explain what it is. --Sam */ - - if(reg_offset) { - printk("%s: register offset unsupported. please fix this if you know what it is.\n", dev->name); - return -ENODEV; - } - /* Software reset, then initialize control registers. */ - sonic_write(dev, SONIC_CMD, SONIC_CR_RST); - sonic_write(dev, SONIC_DCR, SONIC_DCR_BMS | - SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_EXBUS | - (dma_bitmode ? SONIC_DCR_DW : 0)); + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + + SONIC_WRITE(SONIC_DCR, SONIC_DCR_EXBUS | SONIC_DCR_BMS | + SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | + (lp->dma_bitmode ? SONIC_DCR_DW : 0)); /* This *must* be written back to in order to restore the - extended programmable output bits */ - sonic_write(dev, SONIC_DCR2, 0); + * extended programmable output bits, as it may not have been + * initialised since the hardware reset. */ + SONIC_WRITE(SONIC_DCR2, 0); /* Clear *and* disable interrupts to be on the safe side */ - sonic_write(dev, SONIC_ISR,0x7fff); - sonic_write(dev, SONIC_IMR,0); + SONIC_WRITE(SONIC_IMR, 0); + SONIC_WRITE(SONIC_ISR, 0x7fff); /* Now look for the MAC address. */ if (mac_onboard_sonic_ethernet_addr(dev) != 0) return -ENODEV; - printk(KERN_INFO "MAC "); - for (i = 0; i < 6; i++) { - printk("%2.2x", dev->dev_addr[i]); - if (i < 5) - printk(":"); - } - - printk(" IRQ %d\n", dev->irq); - /* Shared init code */ return macsonic_init(dev); } @@ -468,8 +379,10 @@ int __init mac_nubus_sonic_ethernet_addr(struct net_device* dev, int i; for(i = 0; i < 6; i++) dev->dev_addr[i] = SONIC_READ_PROM(i); - /* For now we are going to assume that they're all bit-reversed */ - bit_reverse_addr(dev->dev_addr); + + /* Some of the addresses are bit-reversed */ + if (id != MACSONIC_DAYNA) + bit_reverse_addr(dev->dev_addr); return 0; } @@ -487,6 +400,15 @@ int __init macsonic_ident(struct nubus_dev* ndev) else return MACSONIC_APPLE; } + + if (ndev->dr_hw == NUBUS_DRHW_SMC9194 && + ndev->dr_sw == NUBUS_DRSW_DAYNA) + return MACSONIC_DAYNA; + + if (ndev->dr_hw == NUBUS_DRHW_SONIC_LC && + ndev->dr_sw == 0) { /* huh? */ + return MACSONIC_APPLE16; + } return -1; } @@ -494,12 +416,12 @@ int __init mac_nubus_sonic_probe(struct net_device* dev) { static int slots; struct nubus_dev* ndev = NULL; + struct sonic_local* lp = netdev_priv(dev); unsigned long base_addr, prom_addr; u16 sonic_dcr; - int id; - int i; - int dma_bitmode; - + int id = -1; + int reg_offset, dma_bitmode; + /* Find the first SONIC that hasn't been initialized already */ while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, NUBUS_TYPE_ETHERNET, ndev)) != NULL) @@ -521,51 +443,52 @@ int __init mac_nubus_sonic_probe(struct net_device* dev) case MACSONIC_DUODOCK: base_addr = ndev->board->slot_addr + DUODOCK_SONIC_REGISTERS; prom_addr = ndev->board->slot_addr + DUODOCK_SONIC_PROM_BASE; - sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1 - | SONIC_DCR_TFT0; + sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1 | + SONIC_DCR_TFT0; reg_offset = 2; - dma_bitmode = 1; + dma_bitmode = SONIC_BITMODE32; break; case MACSONIC_APPLE: base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS; prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE; sonic_dcr = SONIC_DCR_BMS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0; reg_offset = 0; - dma_bitmode = 1; + dma_bitmode = SONIC_BITMODE32; break; case MACSONIC_APPLE16: base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS; prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE; - sonic_dcr = SONIC_DCR_EXBUS - | SONIC_DCR_RFT1 | SONIC_DCR_TFT0 - | SONIC_DCR_PO1 | SONIC_DCR_BMS; + sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | + SONIC_DCR_PO1 | SONIC_DCR_BMS; reg_offset = 0; - dma_bitmode = 0; + dma_bitmode = SONIC_BITMODE16; break; case MACSONIC_DAYNALINK: base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS; prom_addr = ndev->board->slot_addr + DAYNALINK_PROM_BASE; - sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0 - | SONIC_DCR_PO1 | SONIC_DCR_BMS; + sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | + SONIC_DCR_PO1 | SONIC_DCR_BMS; reg_offset = 0; - dma_bitmode = 0; + dma_bitmode = SONIC_BITMODE16; break; case MACSONIC_DAYNA: base_addr = ndev->board->slot_addr + DAYNA_SONIC_REGISTERS; prom_addr = ndev->board->slot_addr + DAYNA_SONIC_MAC_ADDR; - sonic_dcr = SONIC_DCR_BMS - | SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1; + sonic_dcr = SONIC_DCR_BMS | + SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1; reg_offset = 0; - dma_bitmode = 0; + dma_bitmode = SONIC_BITMODE16; break; default: printk(KERN_ERR "macsonic: WTF, id is %d\n", id); return -ENODEV; } - /* Danger! My arms are flailing wildly! You *must* set this - before using sonic_read() */ + /* Danger! My arms are flailing wildly! You *must* set lp->reg_offset + * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */ dev->base_addr = base_addr; + lp->reg_offset = reg_offset; + lp->dma_bitmode = dma_bitmode; dev->irq = SLOT2IRQ(ndev->board->slot); if (!sonic_version_printed) { @@ -573,29 +496,66 @@ int __init mac_nubus_sonic_probe(struct net_device* dev) sonic_version_printed = 1; } printk(KERN_INFO "%s: %s in slot %X\n", - dev->name, ndev->board->name, ndev->board->slot); + lp->device->bus_id, ndev->board->name, ndev->board->slot); printk(KERN_INFO "%s: revision 0x%04x, using %d bit DMA and register offset %d\n", - dev->name, sonic_read(dev, SONIC_SR), dma_bitmode?32:16, reg_offset); + lp->device->bus_id, SONIC_READ(SONIC_SR), dma_bitmode?32:16, reg_offset); - if(reg_offset) { - printk("%s: register offset unsupported. please fix this if you know what it is.\n", dev->name); - return -ENODEV; - } +#if 0 /* This is sometimes useful to find out how MacOS configured the card. */ + printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", lp->device->bus_id, + SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff); +#endif /* Software reset, then initialize control registers. */ - sonic_write(dev, SONIC_CMD, SONIC_CR_RST); - sonic_write(dev, SONIC_DCR, sonic_dcr - | (dma_bitmode ? SONIC_DCR_DW : 0)); + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + SONIC_WRITE(SONIC_DCR, sonic_dcr | (dma_bitmode ? SONIC_DCR_DW : 0)); + /* This *must* be written back to in order to restore the + * extended programmable output bits, since it may not have been + * initialised since the hardware reset. */ + SONIC_WRITE(SONIC_DCR2, 0); /* Clear *and* disable interrupts to be on the safe side */ - sonic_write(dev, SONIC_ISR,0x7fff); - sonic_write(dev, SONIC_IMR,0); + SONIC_WRITE(SONIC_IMR, 0); + SONIC_WRITE(SONIC_ISR, 0x7fff); /* Now look for the MAC address. */ if (mac_nubus_sonic_ethernet_addr(dev, prom_addr, id) != 0) return -ENODEV; - printk(KERN_INFO "MAC "); + /* Shared init code */ + return macsonic_init(dev); +} + +static int __init mac_sonic_probe(struct device *device) +{ + struct net_device *dev; + struct sonic_local *lp; + int err; + int i; + + dev = alloc_etherdev(sizeof(struct sonic_local)); + if (!dev) + return -ENOMEM; + + lp = netdev_priv(dev); + lp->device = device; + SET_NETDEV_DEV(dev, device); + SET_MODULE_OWNER(dev); + + /* This will catch fatal stuff like -ENOMEM as well as success */ + err = mac_onboard_sonic_probe(dev); + if (err == 0) + goto found; + if (err != -ENODEV) + goto out; + err = mac_nubus_sonic_probe(dev); + if (err) + goto out; +found: + err = register_netdev(dev); + if (err) + goto out; + + printk("%s: MAC ", dev->name); for (i = 0; i < 6; i++) { printk("%2.2x", dev->dev_addr[i]); if (i < 5) @@ -603,55 +563,95 @@ int __init mac_nubus_sonic_probe(struct net_device* dev) } printk(" IRQ %d\n", dev->irq); - /* Shared init code */ - return macsonic_init(dev); -} + return 0; -#ifdef MODULE -static struct net_device *dev_macsonic; +out: + free_netdev(dev); -MODULE_PARM(sonic_debug, "i"); + return err; +} + +MODULE_DESCRIPTION("Macintosh SONIC ethernet driver"); +module_param(sonic_debug, int, 0); MODULE_PARM_DESC(sonic_debug, "macsonic debug level (1-4)"); -int -init_module(void) +#define SONIC_IRQ_FLAG IRQ_FLG_FAST + +#include "sonic.c" + +static int __devexit mac_sonic_device_remove (struct device *device) { - dev_macsonic = macsonic_probe(-1); - if (IS_ERR(dev_macsonic)) { - printk(KERN_WARNING "macsonic.c: No card found\n"); - return PTR_ERR(dev_macsonic); - } + struct net_device *dev = device->driver_data; + struct sonic_local* lp = netdev_priv(dev); + + unregister_netdev (dev); + dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + lp->descriptors, lp->descriptors_laddr); + free_netdev (dev); + return 0; } -void -cleanup_module(void) +static struct device_driver mac_sonic_driver = { + .name = mac_sonic_string, + .bus = &platform_bus_type, + .probe = mac_sonic_probe, + .remove = __devexit_p(mac_sonic_device_remove), +}; + +static void mac_sonic_platform_release(struct device *device) { - unregister_netdev(dev_macsonic); - kfree(dev_macsonic->priv); - free_netdev(dev_macsonic); + struct platform_device *pldev; + + /* free device */ + pldev = to_platform_device (device); + kfree (pldev); } -#endif /* MODULE */ +static int __init mac_sonic_init_module(void) +{ + struct platform_device *pldev; + int err; -#define vdma_alloc(foo, bar) ((u32)foo) -#define vdma_free(baz) -#define sonic_chiptomem(bat) (bat) -#define PHYSADDR(quux) (quux) -#define CPHYSADDR(quux) (quux) + if ((err = driver_register(&mac_sonic_driver))) { + printk(KERN_ERR "Driver registration failed\n"); + return err; + } -#define sonic_request_irq request_irq -#define sonic_free_irq free_irq + mac_sonic_device = NULL; -#include "sonic.c" + if (!(pldev = kmalloc (sizeof (*pldev), GFP_KERNEL))) { + goto out_unregister; + } -/* - * Local variables: - * compile-command: "m68k-linux-gcc -D__KERNEL__ -I../../include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -pipe -fno-strength-reduce -ffixed-a2 -DMODULE -DMODVERSIONS -include ../../include/linux/modversions.h -c -o macsonic.o macsonic.c" - * version-control: t - * kept-new-versions: 5 - * c-indent-level: 8 - * tab-width: 8 - * End: - * - */ + memset(pldev, 0, sizeof (*pldev)); + pldev->name = mac_sonic_string; + pldev->id = 0; + pldev->dev.release = mac_sonic_platform_release; + mac_sonic_device = pldev; + + if (platform_device_register (pldev)) { + kfree(pldev); + mac_sonic_device = NULL; + } + + return 0; + +out_unregister: + platform_device_unregister(pldev); + + return -ENOMEM; +} + +static void __exit mac_sonic_cleanup_module(void) +{ + driver_unregister(&mac_sonic_driver); + + if (mac_sonic_device) { + platform_device_unregister(mac_sonic_device); + mac_sonic_device = NULL; + } +} + +module_init(mac_sonic_init_module); +module_exit(mac_sonic_cleanup_module); diff --git a/drivers/net/sonic.c b/drivers/net/sonic.c index cdc9cc873e06..90b818a8de6e 100644 --- a/drivers/net/sonic.c +++ b/drivers/net/sonic.c @@ -1,6 +1,11 @@ /* * sonic.c * + * (C) 2005 Finn Thain + * + * Converted to DMA API, added zero-copy buffer handling, and + * (from the mac68k project) introduced dhd's support for 16-bit cards. + * * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de) * * This driver is based on work from Andreas Busse, but most of @@ -9,12 +14,23 @@ * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de) * * Core code included by system sonic drivers + * + * And... partially rewritten again by David Huggins-Daines in order + * to cope with screwed up Macintosh NICs that may or may not use + * 16-bit DMA. + * + * (C) 1999 David Huggins-Daines + * */ /* * Sources: Olivetti M700-10 Risc Personal Computer hardware handbook, * National Semiconductors data sheet for the DP83932B Sonic Ethernet * controller, and the files "8390.c" and "skeleton.c" in this directory. + * + * Additional sources: Nat Semi data sheet for the DP83932C and Nat Semi + * Application Note AN-746, the files "lance.c" and "ibmlana.c". See also + * the NetBSD file "sys/arch/mac68k/dev/if_sn.c". */ @@ -28,6 +44,9 @@ */ static int sonic_open(struct net_device *dev) { + struct sonic_local *lp = netdev_priv(dev); + int i; + if (sonic_debug > 2) printk("sonic_open: initializing sonic driver.\n"); @@ -40,14 +59,59 @@ static int sonic_open(struct net_device *dev) * This means that during execution of the handler interrupt are disabled * covering another bug otherwise corrupting data. This doesn't mean * this glue works ok under all situations. + * + * Note (dhd): this also appears to prevent lockups on the Macintrash + * when more than one Ethernet card is installed (knock on wood) + * + * Note (fthain): whether the above is still true is anyones guess. Certainly + * the buffer handling algorithms will not tolerate re-entrance without some + * mutual exclusion added. Anyway, the memcpy has now been eliminated from the + * rx code to make this a faster "fast interrupt". */ -// if (sonic_request_irq(dev->irq, &sonic_interrupt, 0, "sonic", dev)) { - if (sonic_request_irq(dev->irq, &sonic_interrupt, SA_INTERRUPT, - "sonic", dev)) { - printk("\n%s: unable to get IRQ %d .\n", dev->name, dev->irq); + if (request_irq(dev->irq, &sonic_interrupt, SONIC_IRQ_FLAG, "sonic", dev)) { + printk(KERN_ERR "\n%s: unable to get IRQ %d .\n", dev->name, dev->irq); return -EAGAIN; } + for (i = 0; i < SONIC_NUM_RRS; i++) { + struct sk_buff *skb = dev_alloc_skb(SONIC_RBSIZE + 2); + if (skb == NULL) { + while(i > 0) { /* free any that were allocated successfully */ + i--; + dev_kfree_skb(lp->rx_skb[i]); + lp->rx_skb[i] = NULL; + } + printk(KERN_ERR "%s: couldn't allocate receive buffers\n", + dev->name); + return -ENOMEM; + } + skb->dev = dev; + /* align IP header unless DMA requires otherwise */ + if (SONIC_BUS_SCALE(lp->dma_bitmode) == 2) + skb_reserve(skb, 2); + lp->rx_skb[i] = skb; + } + + for (i = 0; i < SONIC_NUM_RRS; i++) { + dma_addr_t laddr = dma_map_single(lp->device, skb_put(lp->rx_skb[i], SONIC_RBSIZE), + SONIC_RBSIZE, DMA_FROM_DEVICE); + if (!laddr) { + while(i > 0) { /* free any that were mapped successfully */ + i--; + dma_unmap_single(lp->device, lp->rx_laddr[i], SONIC_RBSIZE, DMA_FROM_DEVICE); + lp->rx_laddr[i] = (dma_addr_t)0; + } + for (i = 0; i < SONIC_NUM_RRS; i++) { + dev_kfree_skb(lp->rx_skb[i]); + lp->rx_skb[i] = NULL; + } + printk(KERN_ERR "%s: couldn't map rx DMA buffers\n", + dev->name); + return -ENOMEM; + } + lp->rx_laddr[i] = laddr; + } + /* * Initialize the SONIC */ @@ -67,7 +131,8 @@ static int sonic_open(struct net_device *dev) */ static int sonic_close(struct net_device *dev) { - unsigned int base_addr = dev->base_addr; + struct sonic_local *lp = netdev_priv(dev); + int i; if (sonic_debug > 2) printk("sonic_close\n"); @@ -77,20 +142,56 @@ static int sonic_close(struct net_device *dev) /* * stop the SONIC, disable interrupts */ - SONIC_WRITE(SONIC_ISR, 0x7fff); SONIC_WRITE(SONIC_IMR, 0); + SONIC_WRITE(SONIC_ISR, 0x7fff); SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); - sonic_free_irq(dev->irq, dev); /* release the IRQ */ + /* unmap and free skbs that haven't been transmitted */ + for (i = 0; i < SONIC_NUM_TDS; i++) { + if(lp->tx_laddr[i]) { + dma_unmap_single(lp->device, lp->tx_laddr[i], lp->tx_len[i], DMA_TO_DEVICE); + lp->tx_laddr[i] = (dma_addr_t)0; + } + if(lp->tx_skb[i]) { + dev_kfree_skb(lp->tx_skb[i]); + lp->tx_skb[i] = NULL; + } + } + + /* unmap and free the receive buffers */ + for (i = 0; i < SONIC_NUM_RRS; i++) { + if(lp->rx_laddr[i]) { + dma_unmap_single(lp->device, lp->rx_laddr[i], SONIC_RBSIZE, DMA_FROM_DEVICE); + lp->rx_laddr[i] = (dma_addr_t)0; + } + if(lp->rx_skb[i]) { + dev_kfree_skb(lp->rx_skb[i]); + lp->rx_skb[i] = NULL; + } + } + + free_irq(dev->irq, dev); /* release the IRQ */ return 0; } static void sonic_tx_timeout(struct net_device *dev) { - struct sonic_local *lp = (struct sonic_local *) dev->priv; - printk("%s: transmit timed out.\n", dev->name); - + struct sonic_local *lp = netdev_priv(dev); + int i; + /* Stop the interrupts for this */ + SONIC_WRITE(SONIC_IMR, 0); + /* We could resend the original skbs. Easier to re-initialise. */ + for (i = 0; i < SONIC_NUM_TDS; i++) { + if(lp->tx_laddr[i]) { + dma_unmap_single(lp->device, lp->tx_laddr[i], lp->tx_len[i], DMA_TO_DEVICE); + lp->tx_laddr[i] = (dma_addr_t)0; + } + if(lp->tx_skb[i]) { + dev_kfree_skb(lp->tx_skb[i]); + lp->tx_skb[i] = NULL; + } + } /* Try to restart the adaptor. */ sonic_init(dev); lp->stats.tx_errors++; @@ -100,60 +201,92 @@ static void sonic_tx_timeout(struct net_device *dev) /* * transmit packet + * + * Appends new TD during transmission thus avoiding any TX interrupts + * until we run out of TDs. + * This routine interacts closely with the ISR in that it may, + * set tx_skb[i] + * reset the status flags of the new TD + * set and reset EOL flags + * stop the tx queue + * The ISR interacts with this routine in various ways. It may, + * reset tx_skb[i] + * test the EOL and status flags of the TDs + * wake the tx queue + * Concurrently with all of this, the SONIC is potentially writing to + * the status flags of the TDs. + * Until some mutual exclusion is added, this code will not work with SMP. However, + * MIPS Jazz machines and m68k Macs were all uni-processor machines. */ + static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev) { - struct sonic_local *lp = (struct sonic_local *) dev->priv; - unsigned int base_addr = dev->base_addr; - unsigned int laddr; - int entry, length; - - netif_stop_queue(dev); + struct sonic_local *lp = netdev_priv(dev); + dma_addr_t laddr; + int length; + int entry = lp->next_tx; if (sonic_debug > 2) printk("sonic_send_packet: skb=%p, dev=%p\n", skb, dev); + length = skb->len; + if (length < ETH_ZLEN) { + skb = skb_padto(skb, ETH_ZLEN); + if (skb == NULL) + return 0; + length = ETH_ZLEN; + } + /* * Map the packet data into the logical DMA address space */ - if ((laddr = vdma_alloc(CPHYSADDR(skb->data), skb->len)) == ~0UL) { - printk("%s: no VDMA entry for transmit available.\n", - dev->name); + + laddr = dma_map_single(lp->device, skb->data, length, DMA_TO_DEVICE); + if (!laddr) { + printk(KERN_ERR "%s: failed to map tx DMA buffer.\n", dev->name); dev_kfree_skb(skb); - netif_start_queue(dev); return 1; } - entry = lp->cur_tx & SONIC_TDS_MASK; + + sonic_tda_put(dev, entry, SONIC_TD_STATUS, 0); /* clear status */ + sonic_tda_put(dev, entry, SONIC_TD_FRAG_COUNT, 1); /* single fragment */ + sonic_tda_put(dev, entry, SONIC_TD_PKTSIZE, length); /* length of packet */ + sonic_tda_put(dev, entry, SONIC_TD_FRAG_PTR_L, laddr & 0xffff); + sonic_tda_put(dev, entry, SONIC_TD_FRAG_PTR_H, laddr >> 16); + sonic_tda_put(dev, entry, SONIC_TD_FRAG_SIZE, length); + sonic_tda_put(dev, entry, SONIC_TD_LINK, + sonic_tda_get(dev, entry, SONIC_TD_LINK) | SONIC_EOL); + + /* + * Must set tx_skb[entry] only after clearing status, and + * before clearing EOL and before stopping queue + */ + wmb(); + lp->tx_len[entry] = length; lp->tx_laddr[entry] = laddr; lp->tx_skb[entry] = skb; - length = (skb->len < ETH_ZLEN) ? ETH_ZLEN : skb->len; - flush_cache_all(); + wmb(); + sonic_tda_put(dev, lp->eol_tx, SONIC_TD_LINK, + sonic_tda_get(dev, lp->eol_tx, SONIC_TD_LINK) & ~SONIC_EOL); + lp->eol_tx = entry; - /* - * Setup the transmit descriptor and issue the transmit command. - */ - lp->tda[entry].tx_status = 0; /* clear status */ - lp->tda[entry].tx_frag_count = 1; /* single fragment */ - lp->tda[entry].tx_pktsize = length; /* length of packet */ - lp->tda[entry].tx_frag_ptr_l = laddr & 0xffff; - lp->tda[entry].tx_frag_ptr_h = laddr >> 16; - lp->tda[entry].tx_frag_size = length; - lp->cur_tx++; - lp->stats.tx_bytes += length; + lp->next_tx = (entry + 1) & SONIC_TDS_MASK; + if (lp->tx_skb[lp->next_tx] != NULL) { + /* The ring is full, the ISR has yet to process the next TD. */ + if (sonic_debug > 3) + printk("%s: stopping queue\n", dev->name); + netif_stop_queue(dev); + /* after this packet, wait for ISR to free up some TDAs */ + } else netif_start_queue(dev); if (sonic_debug > 2) - printk("sonic_send_packet: issueing Tx command\n"); + printk("sonic_send_packet: issuing Tx command\n"); SONIC_WRITE(SONIC_CMD, SONIC_CR_TXP); dev->trans_start = jiffies; - if (lp->cur_tx < lp->dirty_tx + SONIC_NUM_TDS) - netif_start_queue(dev); - else - lp->tx_full = 1; - return 0; } @@ -164,175 +297,199 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev) static irqreturn_t sonic_interrupt(int irq, void *dev_id, struct pt_regs *regs) { struct net_device *dev = (struct net_device *) dev_id; - unsigned int base_addr = dev->base_addr; - struct sonic_local *lp; + struct sonic_local *lp = netdev_priv(dev); int status; if (dev == NULL) { - printk("sonic_interrupt: irq %d for unknown device.\n", irq); + printk(KERN_ERR "sonic_interrupt: irq %d for unknown device.\n", irq); return IRQ_NONE; } - lp = (struct sonic_local *) dev->priv; - - status = SONIC_READ(SONIC_ISR); - SONIC_WRITE(SONIC_ISR, 0x7fff); /* clear all bits */ - - if (sonic_debug > 2) - printk("sonic_interrupt: ISR=%x\n", status); - - if (status & SONIC_INT_PKTRX) { - sonic_rx(dev); /* got packet(s) */ - } - - if (status & SONIC_INT_TXDN) { - int dirty_tx = lp->dirty_tx; - - while (dirty_tx < lp->cur_tx) { - int entry = dirty_tx & SONIC_TDS_MASK; - int status = lp->tda[entry].tx_status; + if (!(status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT)) + return IRQ_NONE; - if (sonic_debug > 3) - printk - ("sonic_interrupt: status %d, cur_tx %d, dirty_tx %d\n", - status, lp->cur_tx, lp->dirty_tx); + do { + if (status & SONIC_INT_PKTRX) { + if (sonic_debug > 2) + printk("%s: packet rx\n", dev->name); + sonic_rx(dev); /* got packet(s) */ + SONIC_WRITE(SONIC_ISR, SONIC_INT_PKTRX); /* clear the interrupt */ + } - if (status == 0) { - /* It still hasn't been Txed, kick the sonic again */ - SONIC_WRITE(SONIC_CMD, SONIC_CR_TXP); - break; - } + if (status & SONIC_INT_TXDN) { + int entry = lp->cur_tx; + int td_status; + int freed_some = 0; - /* put back EOL and free descriptor */ - lp->tda[entry].tx_frag_count = 0; - lp->tda[entry].tx_status = 0; - - if (status & 0x0001) - lp->stats.tx_packets++; - else { - lp->stats.tx_errors++; - if (status & 0x0642) - lp->stats.tx_aborted_errors++; - if (status & 0x0180) - lp->stats.tx_carrier_errors++; - if (status & 0x0020) - lp->stats.tx_window_errors++; - if (status & 0x0004) - lp->stats.tx_fifo_errors++; - } + /* At this point, cur_tx is the index of a TD that is one of: + * unallocated/freed (status set & tx_skb[entry] clear) + * allocated and sent (status set & tx_skb[entry] set ) + * allocated and not yet sent (status clear & tx_skb[entry] set ) + * still being allocated by sonic_send_packet (status clear & tx_skb[entry] clear) + */ - /* We must free the original skb */ - if (lp->tx_skb[entry]) { + if (sonic_debug > 2) + printk("%s: tx done\n", dev->name); + + while (lp->tx_skb[entry] != NULL) { + if ((td_status = sonic_tda_get(dev, entry, SONIC_TD_STATUS)) == 0) + break; + + if (td_status & 0x0001) { + lp->stats.tx_packets++; + lp->stats.tx_bytes += sonic_tda_get(dev, entry, SONIC_TD_PKTSIZE); + } else { + lp->stats.tx_errors++; + if (td_status & 0x0642) + lp->stats.tx_aborted_errors++; + if (td_status & 0x0180) + lp->stats.tx_carrier_errors++; + if (td_status & 0x0020) + lp->stats.tx_window_errors++; + if (td_status & 0x0004) + lp->stats.tx_fifo_errors++; + } + + /* We must free the original skb */ dev_kfree_skb_irq(lp->tx_skb[entry]); - lp->tx_skb[entry] = 0; + lp->tx_skb[entry] = NULL; + /* and unmap DMA buffer */ + dma_unmap_single(lp->device, lp->tx_laddr[entry], lp->tx_len[entry], DMA_TO_DEVICE); + lp->tx_laddr[entry] = (dma_addr_t)0; + freed_some = 1; + + if (sonic_tda_get(dev, entry, SONIC_TD_LINK) & SONIC_EOL) { + entry = (entry + 1) & SONIC_TDS_MASK; + break; + } + entry = (entry + 1) & SONIC_TDS_MASK; } - /* and the VDMA address */ - vdma_free(lp->tx_laddr[entry]); - dirty_tx++; - } - if (lp->tx_full - && dirty_tx + SONIC_NUM_TDS > lp->cur_tx + 2) { - /* The ring is no longer full, clear tbusy. */ - lp->tx_full = 0; - netif_wake_queue(dev); + if (freed_some || lp->tx_skb[entry] == NULL) + netif_wake_queue(dev); /* The ring is no longer full */ + lp->cur_tx = entry; + SONIC_WRITE(SONIC_ISR, SONIC_INT_TXDN); /* clear the interrupt */ } - lp->dirty_tx = dirty_tx; - } + /* + * check error conditions + */ + if (status & SONIC_INT_RFO) { + if (sonic_debug > 1) + printk("%s: rx fifo overrun\n", dev->name); + lp->stats.rx_fifo_errors++; + SONIC_WRITE(SONIC_ISR, SONIC_INT_RFO); /* clear the interrupt */ + } + if (status & SONIC_INT_RDE) { + if (sonic_debug > 1) + printk("%s: rx descriptors exhausted\n", dev->name); + lp->stats.rx_dropped++; + SONIC_WRITE(SONIC_ISR, SONIC_INT_RDE); /* clear the interrupt */ + } + if (status & SONIC_INT_RBAE) { + if (sonic_debug > 1) + printk("%s: rx buffer area exceeded\n", dev->name); + lp->stats.rx_dropped++; + SONIC_WRITE(SONIC_ISR, SONIC_INT_RBAE); /* clear the interrupt */ + } - /* - * check error conditions - */ - if (status & SONIC_INT_RFO) { - printk("%s: receive fifo underrun\n", dev->name); - lp->stats.rx_fifo_errors++; - } - if (status & SONIC_INT_RDE) { - printk("%s: receive descriptors exhausted\n", dev->name); - lp->stats.rx_dropped++; - } - if (status & SONIC_INT_RBE) { - printk("%s: receive buffer exhausted\n", dev->name); - lp->stats.rx_dropped++; - } - if (status & SONIC_INT_RBAE) { - printk("%s: receive buffer area exhausted\n", dev->name); - lp->stats.rx_dropped++; - } + /* counter overruns; all counters are 16bit wide */ + if (status & SONIC_INT_FAE) { + lp->stats.rx_frame_errors += 65536; + SONIC_WRITE(SONIC_ISR, SONIC_INT_FAE); /* clear the interrupt */ + } + if (status & SONIC_INT_CRC) { + lp->stats.rx_crc_errors += 65536; + SONIC_WRITE(SONIC_ISR, SONIC_INT_CRC); /* clear the interrupt */ + } + if (status & SONIC_INT_MP) { + lp->stats.rx_missed_errors += 65536; + SONIC_WRITE(SONIC_ISR, SONIC_INT_MP); /* clear the interrupt */ + } - /* counter overruns; all counters are 16bit wide */ - if (status & SONIC_INT_FAE) - lp->stats.rx_frame_errors += 65536; - if (status & SONIC_INT_CRC) - lp->stats.rx_crc_errors += 65536; - if (status & SONIC_INT_MP) - lp->stats.rx_missed_errors += 65536; + /* transmit error */ + if (status & SONIC_INT_TXER) { + if ((SONIC_READ(SONIC_TCR) & SONIC_TCR_FU) && (sonic_debug > 2)) + printk(KERN_ERR "%s: tx fifo underrun\n", dev->name); + SONIC_WRITE(SONIC_ISR, SONIC_INT_TXER); /* clear the interrupt */ + } - /* transmit error */ - if (status & SONIC_INT_TXER) - lp->stats.tx_errors++; + /* bus retry */ + if (status & SONIC_INT_BR) { + printk(KERN_ERR "%s: Bus retry occurred! Device interrupt disabled.\n", + dev->name); + /* ... to help debug DMA problems causing endless interrupts. */ + /* Bounce the eth interface to turn on the interrupt again. */ + SONIC_WRITE(SONIC_IMR, 0); + SONIC_WRITE(SONIC_ISR, SONIC_INT_BR); /* clear the interrupt */ + } - /* - * clear interrupt bits and return - */ - SONIC_WRITE(SONIC_ISR, status); + /* load CAM done */ + if (status & SONIC_INT_LCD) + SONIC_WRITE(SONIC_ISR, SONIC_INT_LCD); /* clear the interrupt */ + } while((status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT)); return IRQ_HANDLED; } /* - * We have a good packet(s), get it/them out of the buffers. + * We have a good packet(s), pass it/them up the network stack. */ static void sonic_rx(struct net_device *dev) { - unsigned int base_addr = dev->base_addr; - struct sonic_local *lp = (struct sonic_local *) dev->priv; - sonic_rd_t *rd = &lp->rda[lp->cur_rx & SONIC_RDS_MASK]; + struct sonic_local *lp = netdev_priv(dev); int status; - - while (rd->in_use == 0) { - struct sk_buff *skb; + int entry = lp->cur_rx; + + while (sonic_rda_get(dev, entry, SONIC_RD_IN_USE) == 0) { + struct sk_buff *used_skb; + struct sk_buff *new_skb; + dma_addr_t new_laddr; + u16 bufadr_l; + u16 bufadr_h; int pkt_len; - unsigned char *pkt_ptr; - status = rd->rx_status; - if (sonic_debug > 3) - printk("status %x, cur_rx %d, cur_rra %x\n", - status, lp->cur_rx, lp->cur_rra); + status = sonic_rda_get(dev, entry, SONIC_RD_STATUS); if (status & SONIC_RCR_PRX) { - pkt_len = rd->rx_pktlen; - pkt_ptr = - (char *) - sonic_chiptomem((rd->rx_pktptr_h << 16) + - rd->rx_pktptr_l); - - if (sonic_debug > 3) - printk - ("pktptr %p (rba %p) h:%x l:%x, bsize h:%x l:%x\n", - pkt_ptr, lp->rba, rd->rx_pktptr_h, - rd->rx_pktptr_l, - SONIC_READ(SONIC_RBWC1), - SONIC_READ(SONIC_RBWC0)); - /* Malloc up new buffer. */ - skb = dev_alloc_skb(pkt_len + 2); - if (skb == NULL) { - printk - ("%s: Memory squeeze, dropping packet.\n", - dev->name); + new_skb = dev_alloc_skb(SONIC_RBSIZE + 2); + if (new_skb == NULL) { + printk(KERN_ERR "%s: Memory squeeze, dropping packet.\n", dev->name); + lp->stats.rx_dropped++; + break; + } + new_skb->dev = dev; + /* provide 16 byte IP header alignment unless DMA requires otherwise */ + if(SONIC_BUS_SCALE(lp->dma_bitmode) == 2) + skb_reserve(new_skb, 2); + + new_laddr = dma_map_single(lp->device, skb_put(new_skb, SONIC_RBSIZE), + SONIC_RBSIZE, DMA_FROM_DEVICE); + if (!new_laddr) { + dev_kfree_skb(new_skb); + printk(KERN_ERR "%s: Failed to map rx buffer, dropping packet.\n", dev->name); lp->stats.rx_dropped++; break; } - skb->dev = dev; - skb_reserve(skb, 2); /* 16 byte align */ - skb_put(skb, pkt_len); /* Make room */ - eth_copy_and_sum(skb, pkt_ptr, pkt_len, 0); - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); /* pass the packet to upper layers */ + + /* now we have a new skb to replace it, pass the used one up the stack */ + dma_unmap_single(lp->device, lp->rx_laddr[entry], SONIC_RBSIZE, DMA_FROM_DEVICE); + used_skb = lp->rx_skb[entry]; + pkt_len = sonic_rda_get(dev, entry, SONIC_RD_PKTLEN); + skb_trim(used_skb, pkt_len); + used_skb->protocol = eth_type_trans(used_skb, dev); + netif_rx(used_skb); dev->last_rx = jiffies; lp->stats.rx_packets++; lp->stats.rx_bytes += pkt_len; + /* and insert the new skb */ + lp->rx_laddr[entry] = new_laddr; + lp->rx_skb[entry] = new_skb; + + bufadr_l = (unsigned long)new_laddr & 0xffff; + bufadr_h = (unsigned long)new_laddr >> 16; + sonic_rra_put(dev, entry, SONIC_RR_BUFADR_L, bufadr_l); + sonic_rra_put(dev, entry, SONIC_RR_BUFADR_H, bufadr_h); } else { /* This should only happen, if we enable accepting broken packets. */ lp->stats.rx_errors++; @@ -341,29 +498,35 @@ static void sonic_rx(struct net_device *dev) if (status & SONIC_RCR_CRCR) lp->stats.rx_crc_errors++; } - - rd->in_use = 1; - rd = &lp->rda[(++lp->cur_rx) & SONIC_RDS_MASK]; - /* now give back the buffer to the receive buffer area */ if (status & SONIC_RCR_LPKT) { /* - * this was the last packet out of the current receice buffer + * this was the last packet out of the current receive buffer * give the buffer back to the SONIC */ - lp->cur_rra += sizeof(sonic_rr_t); - if (lp->cur_rra > - (lp->rra_laddr + - (SONIC_NUM_RRS - - 1) * sizeof(sonic_rr_t))) lp->cur_rra = - lp->rra_laddr; - SONIC_WRITE(SONIC_RWP, lp->cur_rra & 0xffff); + lp->cur_rwp += SIZEOF_SONIC_RR * SONIC_BUS_SCALE(lp->dma_bitmode); + if (lp->cur_rwp >= lp->rra_end) lp->cur_rwp = lp->rra_laddr & 0xffff; + SONIC_WRITE(SONIC_RWP, lp->cur_rwp); + if (SONIC_READ(SONIC_ISR) & SONIC_INT_RBE) { + if (sonic_debug > 2) + printk("%s: rx buffer exhausted\n", dev->name); + SONIC_WRITE(SONIC_ISR, SONIC_INT_RBE); /* clear the flag */ + } } else - printk - ("%s: rx desc without RCR_LPKT. Shouldn't happen !?\n", + printk(KERN_ERR "%s: rx desc without RCR_LPKT. Shouldn't happen !?\n", dev->name); + /* + * give back the descriptor + */ + sonic_rda_put(dev, entry, SONIC_RD_LINK, + sonic_rda_get(dev, entry, SONIC_RD_LINK) | SONIC_EOL); + sonic_rda_put(dev, entry, SONIC_RD_IN_USE, 1); + sonic_rda_put(dev, lp->eol_rx, SONIC_RD_LINK, + sonic_rda_get(dev, lp->eol_rx, SONIC_RD_LINK) & ~SONIC_EOL); + lp->eol_rx = entry; + lp->cur_rx = entry = (entry + 1) & SONIC_RDS_MASK; } /* - * If any worth-while packets have been received, dev_rint() + * If any worth-while packets have been received, netif_rx() * has done a mark_bh(NET_BH) for us and will work on them * when we get to the bottom-half routine. */ @@ -376,8 +539,7 @@ static void sonic_rx(struct net_device *dev) */ static struct net_device_stats *sonic_get_stats(struct net_device *dev) { - struct sonic_local *lp = (struct sonic_local *) dev->priv; - unsigned int base_addr = dev->base_addr; + struct sonic_local *lp = netdev_priv(dev); /* read the tally counter from the SONIC and reset them */ lp->stats.rx_crc_errors += SONIC_READ(SONIC_CRCT); @@ -396,8 +558,7 @@ static struct net_device_stats *sonic_get_stats(struct net_device *dev) */ static void sonic_multicast_list(struct net_device *dev) { - struct sonic_local *lp = (struct sonic_local *) dev->priv; - unsigned int base_addr = dev->base_addr; + struct sonic_local *lp = netdev_priv(dev); unsigned int rcr; struct dev_mc_list *dmi = dev->mc_list; unsigned char *addr; @@ -413,20 +574,15 @@ static void sonic_multicast_list(struct net_device *dev) rcr |= SONIC_RCR_AMC; } else { if (sonic_debug > 2) - printk - ("sonic_multicast_list: mc_count %d\n", - dev->mc_count); - lp->cda.cam_enable = 1; /* always enable our own address */ + printk("sonic_multicast_list: mc_count %d\n", dev->mc_count); + sonic_set_cam_enable(dev, 1); /* always enable our own address */ for (i = 1; i <= dev->mc_count; i++) { addr = dmi->dmi_addr; dmi = dmi->next; - lp->cda.cam_desc[i].cam_cap0 = - addr[1] << 8 | addr[0]; - lp->cda.cam_desc[i].cam_cap1 = - addr[3] << 8 | addr[2]; - lp->cda.cam_desc[i].cam_cap2 = - addr[5] << 8 | addr[4]; - lp->cda.cam_enable |= (1 << i); + sonic_cda_put(dev, i, SONIC_CD_CAP0, addr[1] << 8 | addr[0]); + sonic_cda_put(dev, i, SONIC_CD_CAP1, addr[3] << 8 | addr[2]); + sonic_cda_put(dev, i, SONIC_CD_CAP2, addr[5] << 8 | addr[4]); + sonic_set_cam_enable(dev, sonic_get_cam_enable(dev) | (1 << i)); } SONIC_WRITE(SONIC_CDC, 16); /* issue Load CAM command */ @@ -447,19 +603,16 @@ static void sonic_multicast_list(struct net_device *dev) */ static int sonic_init(struct net_device *dev) { - unsigned int base_addr = dev->base_addr; unsigned int cmd; - struct sonic_local *lp = (struct sonic_local *) dev->priv; - unsigned int rra_start; - unsigned int rra_end; + struct sonic_local *lp = netdev_priv(dev); int i; /* * put the Sonic into software-reset mode and * disable all interrupts */ - SONIC_WRITE(SONIC_ISR, 0x7fff); SONIC_WRITE(SONIC_IMR, 0); + SONIC_WRITE(SONIC_ISR, 0x7fff); SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); /* @@ -475,34 +628,32 @@ static int sonic_init(struct net_device *dev) if (sonic_debug > 2) printk("sonic_init: initialize receive resource area\n"); - rra_start = lp->rra_laddr & 0xffff; - rra_end = - (rra_start + (SONIC_NUM_RRS * sizeof(sonic_rr_t))) & 0xffff; - for (i = 0; i < SONIC_NUM_RRS; i++) { - lp->rra[i].rx_bufadr_l = - (lp->rba_laddr + i * SONIC_RBSIZE) & 0xffff; - lp->rra[i].rx_bufadr_h = - (lp->rba_laddr + i * SONIC_RBSIZE) >> 16; - lp->rra[i].rx_bufsize_l = SONIC_RBSIZE >> 1; - lp->rra[i].rx_bufsize_h = 0; + u16 bufadr_l = (unsigned long)lp->rx_laddr[i] & 0xffff; + u16 bufadr_h = (unsigned long)lp->rx_laddr[i] >> 16; + sonic_rra_put(dev, i, SONIC_RR_BUFADR_L, bufadr_l); + sonic_rra_put(dev, i, SONIC_RR_BUFADR_H, bufadr_h); + sonic_rra_put(dev, i, SONIC_RR_BUFSIZE_L, SONIC_RBSIZE >> 1); + sonic_rra_put(dev, i, SONIC_RR_BUFSIZE_H, 0); } /* initialize all RRA registers */ - SONIC_WRITE(SONIC_RSA, rra_start); - SONIC_WRITE(SONIC_REA, rra_end); - SONIC_WRITE(SONIC_RRP, rra_start); - SONIC_WRITE(SONIC_RWP, rra_end); + lp->rra_end = (lp->rra_laddr + SONIC_NUM_RRS * SIZEOF_SONIC_RR * + SONIC_BUS_SCALE(lp->dma_bitmode)) & 0xffff; + lp->cur_rwp = (lp->rra_laddr + (SONIC_NUM_RRS - 1) * SIZEOF_SONIC_RR * + SONIC_BUS_SCALE(lp->dma_bitmode)) & 0xffff; + + SONIC_WRITE(SONIC_RSA, lp->rra_laddr & 0xffff); + SONIC_WRITE(SONIC_REA, lp->rra_end); + SONIC_WRITE(SONIC_RRP, lp->rra_laddr & 0xffff); + SONIC_WRITE(SONIC_RWP, lp->cur_rwp); SONIC_WRITE(SONIC_URRA, lp->rra_laddr >> 16); - SONIC_WRITE(SONIC_EOBC, (SONIC_RBSIZE - 2) >> 1); - - lp->cur_rra = - lp->rra_laddr + (SONIC_NUM_RRS - 1) * sizeof(sonic_rr_t); + SONIC_WRITE(SONIC_EOBC, (SONIC_RBSIZE >> 1) - (lp->dma_bitmode ? 2 : 1)); /* load the resource pointers */ if (sonic_debug > 3) - printk("sonic_init: issueing RRRA command\n"); - + printk("sonic_init: issuing RRRA command\n"); + SONIC_WRITE(SONIC_CMD, SONIC_CR_RRRA); i = 0; while (i++ < 100) { @@ -511,27 +662,30 @@ static int sonic_init(struct net_device *dev) } if (sonic_debug > 2) - printk("sonic_init: status=%x\n", SONIC_READ(SONIC_CMD)); - + printk("sonic_init: status=%x i=%d\n", SONIC_READ(SONIC_CMD), i); + /* * Initialize the receive descriptors so that they * become a circular linked list, ie. let the last * descriptor point to the first again. */ if (sonic_debug > 2) - printk("sonic_init: initialize receive descriptors\n"); - for (i = 0; i < SONIC_NUM_RDS; i++) { - lp->rda[i].rx_status = 0; - lp->rda[i].rx_pktlen = 0; - lp->rda[i].rx_pktptr_l = 0; - lp->rda[i].rx_pktptr_h = 0; - lp->rda[i].rx_seqno = 0; - lp->rda[i].in_use = 1; - lp->rda[i].link = - lp->rda_laddr + (i + 1) * sizeof(sonic_rd_t); + printk("sonic_init: initialize receive descriptors\n"); + for (i=0; irda_laddr + + ((i+1) * SIZEOF_SONIC_RD * SONIC_BUS_SCALE(lp->dma_bitmode))); } /* fix last descriptor */ - lp->rda[SONIC_NUM_RDS - 1].link = lp->rda_laddr; + sonic_rda_put(dev, SONIC_NUM_RDS - 1, SONIC_RD_LINK, + (lp->rda_laddr & 0xffff) | SONIC_EOL); + lp->eol_rx = SONIC_NUM_RDS - 1; lp->cur_rx = 0; SONIC_WRITE(SONIC_URDA, lp->rda_laddr >> 16); SONIC_WRITE(SONIC_CRDA, lp->rda_laddr & 0xffff); @@ -542,34 +696,34 @@ static int sonic_init(struct net_device *dev) if (sonic_debug > 2) printk("sonic_init: initialize transmit descriptors\n"); for (i = 0; i < SONIC_NUM_TDS; i++) { - lp->tda[i].tx_status = 0; - lp->tda[i].tx_config = 0; - lp->tda[i].tx_pktsize = 0; - lp->tda[i].tx_frag_count = 0; - lp->tda[i].link = - (lp->tda_laddr + - (i + 1) * sizeof(sonic_td_t)) | SONIC_END_OF_LINKS; + sonic_tda_put(dev, i, SONIC_TD_STATUS, 0); + sonic_tda_put(dev, i, SONIC_TD_CONFIG, 0); + sonic_tda_put(dev, i, SONIC_TD_PKTSIZE, 0); + sonic_tda_put(dev, i, SONIC_TD_FRAG_COUNT, 0); + sonic_tda_put(dev, i, SONIC_TD_LINK, + (lp->tda_laddr & 0xffff) + + (i + 1) * SIZEOF_SONIC_TD * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->tx_skb[i] = NULL; } - lp->tda[SONIC_NUM_TDS - 1].link = - (lp->tda_laddr & 0xffff) | SONIC_END_OF_LINKS; + /* fix last descriptor */ + sonic_tda_put(dev, SONIC_NUM_TDS - 1, SONIC_TD_LINK, + (lp->tda_laddr & 0xffff)); SONIC_WRITE(SONIC_UTDA, lp->tda_laddr >> 16); SONIC_WRITE(SONIC_CTDA, lp->tda_laddr & 0xffff); - lp->cur_tx = lp->dirty_tx = 0; - + lp->cur_tx = lp->next_tx = 0; + lp->eol_tx = SONIC_NUM_TDS - 1; + /* * put our own address to CAM desc[0] */ - lp->cda.cam_desc[0].cam_cap0 = - dev->dev_addr[1] << 8 | dev->dev_addr[0]; - lp->cda.cam_desc[0].cam_cap1 = - dev->dev_addr[3] << 8 | dev->dev_addr[2]; - lp->cda.cam_desc[0].cam_cap2 = - dev->dev_addr[5] << 8 | dev->dev_addr[4]; - lp->cda.cam_enable = 1; + sonic_cda_put(dev, 0, SONIC_CD_CAP0, dev->dev_addr[1] << 8 | dev->dev_addr[0]); + sonic_cda_put(dev, 0, SONIC_CD_CAP1, dev->dev_addr[3] << 8 | dev->dev_addr[2]); + sonic_cda_put(dev, 0, SONIC_CD_CAP2, dev->dev_addr[5] << 8 | dev->dev_addr[4]); + sonic_set_cam_enable(dev, 1); for (i = 0; i < 16; i++) - lp->cda.cam_desc[i].cam_entry_pointer = i; + sonic_cda_put(dev, i, SONIC_CD_ENTRY_POINTER, i); /* * initialize CAM registers @@ -588,8 +742,8 @@ static int sonic_init(struct net_device *dev) break; } if (sonic_debug > 2) { - printk("sonic_init: CMD=%x, ISR=%x\n", - SONIC_READ(SONIC_CMD), SONIC_READ(SONIC_ISR)); + printk("sonic_init: CMD=%x, ISR=%x\n, i=%d", + SONIC_READ(SONIC_CMD), SONIC_READ(SONIC_ISR), i); } /* @@ -604,7 +758,7 @@ static int sonic_init(struct net_device *dev) cmd = SONIC_READ(SONIC_CMD); if ((cmd & SONIC_CR_RXEN) == 0 || (cmd & SONIC_CR_STP) == 0) - printk("sonic_init: failed, status=%x\n", cmd); + printk(KERN_ERR "sonic_init: failed, status=%x\n", cmd); if (sonic_debug > 2) printk("sonic_init: new status=%x\n", diff --git a/drivers/net/sonic.h b/drivers/net/sonic.h index c4a6d58e4afb..cede969a8baa 100644 --- a/drivers/net/sonic.h +++ b/drivers/net/sonic.h @@ -1,5 +1,5 @@ /* - * Helpfile for sonic.c + * Header file for sonic.c * * (C) Waldorf Electronics, Germany * Written by Andreas Busse @@ -9,10 +9,16 @@ * and pad structure members must be exchanged. Also, the structures * need to be changed accordingly to the bus size. * - * 981229 MSch: did just that for the 68k Mac port (32 bit, big endian), - * see CONFIG_MACSONIC branch below. + * 981229 MSch: did just that for the 68k Mac port (32 bit, big endian) * + * 990611 David Huggins-Daines : This machine abstraction + * does not cope with 16-bit bus sizes very well. Therefore I have + * rewritten it with ugly macros and evil inlines. + * + * 050625 Finn Thain: introduced more 32-bit cards and dhd's support + * for 16-bit cards (from the mac68k project). */ + #ifndef SONIC_H #define SONIC_H @@ -83,6 +89,7 @@ /* * Error counters */ + #define SONIC_CRCT 0x2c #define SONIC_FAET 0x2d #define SONIC_MPT 0x2e @@ -182,14 +189,14 @@ #define SONIC_INT_BR 0x4000 #define SONIC_INT_HBL 0x2000 -#define SONIC_INT_LCD 0x1000 -#define SONIC_INT_PINT 0x0800 -#define SONIC_INT_PKTRX 0x0400 -#define SONIC_INT_TXDN 0x0200 -#define SONIC_INT_TXER 0x0100 -#define SONIC_INT_TC 0x0080 -#define SONIC_INT_RDE 0x0040 -#define SONIC_INT_RBE 0x0020 +#define SONIC_INT_LCD 0x1000 +#define SONIC_INT_PINT 0x0800 +#define SONIC_INT_PKTRX 0x0400 +#define SONIC_INT_TXDN 0x0200 +#define SONIC_INT_TXER 0x0100 +#define SONIC_INT_TC 0x0080 +#define SONIC_INT_RDE 0x0040 +#define SONIC_INT_RBE 0x0020 #define SONIC_INT_RBAE 0x0010 #define SONIC_INT_CRC 0x0008 #define SONIC_INT_FAE 0x0004 @@ -201,224 +208,61 @@ * The interrupts we allow. */ -#define SONIC_IMR_DEFAULT (SONIC_INT_BR | \ - SONIC_INT_LCD | \ - SONIC_INT_PINT | \ +#define SONIC_IMR_DEFAULT ( SONIC_INT_BR | \ + SONIC_INT_LCD | \ + SONIC_INT_RFO | \ SONIC_INT_PKTRX | \ SONIC_INT_TXDN | \ SONIC_INT_TXER | \ SONIC_INT_RDE | \ - SONIC_INT_RBE | \ SONIC_INT_RBAE | \ SONIC_INT_CRC | \ SONIC_INT_FAE | \ SONIC_INT_MP) -#define SONIC_END_OF_LINKS 0x0001 - - -#ifdef CONFIG_MACSONIC -/* - * Big endian like structures on 680x0 Macs - */ - -typedef struct { - u32 rx_bufadr_l; /* receive buffer ptr */ - u32 rx_bufadr_h; - - u32 rx_bufsize_l; /* no. of words in the receive buffer */ - u32 rx_bufsize_h; -} sonic_rr_t; - -/* - * Sonic receive descriptor. Receive descriptors are - * kept in a linked list of these structures. - */ - -typedef struct { - SREGS_PAD(pad0); - u16 rx_status; /* status after reception of a packet */ - SREGS_PAD(pad1); - u16 rx_pktlen; /* length of the packet incl. CRC */ - - /* - * Pointers to the location in the receive buffer area (RBA) - * where the packet resides. A packet is always received into - * a contiguous piece of memory. - */ - SREGS_PAD(pad2); - u16 rx_pktptr_l; - SREGS_PAD(pad3); - u16 rx_pktptr_h; - - SREGS_PAD(pad4); - u16 rx_seqno; /* sequence no. */ - - SREGS_PAD(pad5); - u16 link; /* link to next RDD (end if EOL bit set) */ - - /* - * Owner of this descriptor, 0= driver, 1=sonic - */ - - SREGS_PAD(pad6); - u16 in_use; - - caddr_t rda_next; /* pointer to next RD */ -} sonic_rd_t; - - -/* - * Describes a Transmit Descriptor - */ -typedef struct { - SREGS_PAD(pad0); - u16 tx_status; /* status after transmission of a packet */ - SREGS_PAD(pad1); - u16 tx_config; /* transmit configuration for this packet */ - SREGS_PAD(pad2); - u16 tx_pktsize; /* size of the packet to be transmitted */ - SREGS_PAD(pad3); - u16 tx_frag_count; /* no. of fragments */ - - SREGS_PAD(pad4); - u16 tx_frag_ptr_l; - SREGS_PAD(pad5); - u16 tx_frag_ptr_h; - SREGS_PAD(pad6); - u16 tx_frag_size; - - SREGS_PAD(pad7); - u16 link; /* ptr to next descriptor */ -} sonic_td_t; - - -/* - * Describes an entry in the CAM Descriptor Area. - */ - -typedef struct { - SREGS_PAD(pad0); - u16 cam_entry_pointer; - SREGS_PAD(pad1); - u16 cam_cap0; - SREGS_PAD(pad2); - u16 cam_cap1; - SREGS_PAD(pad3); - u16 cam_cap2; -} sonic_cd_t; - +#define SONIC_EOL 0x0001 #define CAM_DESCRIPTORS 16 - -typedef struct { - sonic_cd_t cam_desc[CAM_DESCRIPTORS]; - SREGS_PAD(pad); - u16 cam_enable; -} sonic_cda_t; - -#else /* original declarations, little endian 32 bit */ - -/* - * structure definitions - */ - -typedef struct { - u32 rx_bufadr_l; /* receive buffer ptr */ - u32 rx_bufadr_h; - - u32 rx_bufsize_l; /* no. of words in the receive buffer */ - u32 rx_bufsize_h; -} sonic_rr_t; - -/* - * Sonic receive descriptor. Receive descriptors are - * kept in a linked list of these structures. - */ - -typedef struct { - u16 rx_status; /* status after reception of a packet */ - SREGS_PAD(pad0); - u16 rx_pktlen; /* length of the packet incl. CRC */ - SREGS_PAD(pad1); - - /* - * Pointers to the location in the receive buffer area (RBA) - * where the packet resides. A packet is always received into - * a contiguous piece of memory. - */ - u16 rx_pktptr_l; - SREGS_PAD(pad2); - u16 rx_pktptr_h; - SREGS_PAD(pad3); - - u16 rx_seqno; /* sequence no. */ - SREGS_PAD(pad4); - - u16 link; /* link to next RDD (end if EOL bit set) */ - SREGS_PAD(pad5); - - /* - * Owner of this descriptor, 0= driver, 1=sonic - */ - - u16 in_use; - SREGS_PAD(pad6); - - caddr_t rda_next; /* pointer to next RD */ -} sonic_rd_t; - - -/* - * Describes a Transmit Descriptor - */ -typedef struct { - u16 tx_status; /* status after transmission of a packet */ - SREGS_PAD(pad0); - u16 tx_config; /* transmit configuration for this packet */ - SREGS_PAD(pad1); - u16 tx_pktsize; /* size of the packet to be transmitted */ - SREGS_PAD(pad2); - u16 tx_frag_count; /* no. of fragments */ - SREGS_PAD(pad3); - - u16 tx_frag_ptr_l; - SREGS_PAD(pad4); - u16 tx_frag_ptr_h; - SREGS_PAD(pad5); - u16 tx_frag_size; - SREGS_PAD(pad6); - - u16 link; /* ptr to next descriptor */ - SREGS_PAD(pad7); -} sonic_td_t; - - -/* - * Describes an entry in the CAM Descriptor Area. - */ - -typedef struct { - u16 cam_entry_pointer; - SREGS_PAD(pad0); - u16 cam_cap0; - SREGS_PAD(pad1); - u16 cam_cap1; - SREGS_PAD(pad2); - u16 cam_cap2; - SREGS_PAD(pad3); -} sonic_cd_t; - -#define CAM_DESCRIPTORS 16 - - -typedef struct { - sonic_cd_t cam_desc[CAM_DESCRIPTORS]; - u16 cam_enable; - SREGS_PAD(pad); -} sonic_cda_t; -#endif /* endianness */ +/* Offsets in the various DMA buffers accessed by the SONIC */ + +#define SONIC_BITMODE16 0 +#define SONIC_BITMODE32 1 +#define SONIC_BUS_SCALE(bitmode) ((bitmode) ? 4 : 2) +/* Note! These are all measured in bus-size units, so use SONIC_BUS_SCALE */ +#define SIZEOF_SONIC_RR 4 +#define SONIC_RR_BUFADR_L 0 +#define SONIC_RR_BUFADR_H 1 +#define SONIC_RR_BUFSIZE_L 2 +#define SONIC_RR_BUFSIZE_H 3 + +#define SIZEOF_SONIC_RD 7 +#define SONIC_RD_STATUS 0 +#define SONIC_RD_PKTLEN 1 +#define SONIC_RD_PKTPTR_L 2 +#define SONIC_RD_PKTPTR_H 3 +#define SONIC_RD_SEQNO 4 +#define SONIC_RD_LINK 5 +#define SONIC_RD_IN_USE 6 + +#define SIZEOF_SONIC_TD 8 +#define SONIC_TD_STATUS 0 +#define SONIC_TD_CONFIG 1 +#define SONIC_TD_PKTSIZE 2 +#define SONIC_TD_FRAG_COUNT 3 +#define SONIC_TD_FRAG_PTR_L 4 +#define SONIC_TD_FRAG_PTR_H 5 +#define SONIC_TD_FRAG_SIZE 6 +#define SONIC_TD_LINK 7 + +#define SIZEOF_SONIC_CD 4 +#define SONIC_CD_ENTRY_POINTER 0 +#define SONIC_CD_CAP0 1 +#define SONIC_CD_CAP1 2 +#define SONIC_CD_CAP2 3 + +#define SIZEOF_SONIC_CDA ((CAM_DESCRIPTORS * SIZEOF_SONIC_CD) + 1) +#define SONIC_CDA_CAM_ENABLE (CAM_DESCRIPTORS * SIZEOF_SONIC_CD) /* * Some tunables for the buffer areas. Power of 2 is required @@ -426,44 +270,60 @@ typedef struct { * * MSch: use more buffer space for the slow m68k Macs! */ -#ifdef CONFIG_MACSONIC -#define SONIC_NUM_RRS 32 /* number of receive resources */ -#define SONIC_NUM_RDS SONIC_NUM_RRS /* number of receive descriptors */ -#define SONIC_NUM_TDS 32 /* number of transmit descriptors */ -#else -#define SONIC_NUM_RRS 16 /* number of receive resources */ -#define SONIC_NUM_RDS SONIC_NUM_RRS /* number of receive descriptors */ -#define SONIC_NUM_TDS 16 /* number of transmit descriptors */ -#endif -#define SONIC_RBSIZE 1520 /* size of one resource buffer */ +#define SONIC_NUM_RRS 16 /* number of receive resources */ +#define SONIC_NUM_RDS SONIC_NUM_RRS /* number of receive descriptors */ +#define SONIC_NUM_TDS 16 /* number of transmit descriptors */ -#define SONIC_RDS_MASK (SONIC_NUM_RDS-1) -#define SONIC_TDS_MASK (SONIC_NUM_TDS-1) +#define SONIC_RDS_MASK (SONIC_NUM_RDS-1) +#define SONIC_TDS_MASK (SONIC_NUM_TDS-1) +#define SONIC_RBSIZE 1520 /* size of one resource buffer */ + +/* Again, measured in bus size units! */ +#define SIZEOF_SONIC_DESC (SIZEOF_SONIC_CDA \ + + (SIZEOF_SONIC_TD * SONIC_NUM_TDS) \ + + (SIZEOF_SONIC_RD * SONIC_NUM_RDS) \ + + (SIZEOF_SONIC_RR * SONIC_NUM_RRS)) /* Information that need to be kept for each board. */ struct sonic_local { - sonic_cda_t cda; /* virtual CPU address of CDA */ - sonic_td_t tda[SONIC_NUM_TDS]; /* transmit descriptor area */ - sonic_rr_t rra[SONIC_NUM_RRS]; /* receive resource area */ - sonic_rd_t rda[SONIC_NUM_RDS]; /* receive descriptor area */ - struct sk_buff *tx_skb[SONIC_NUM_TDS]; /* skbuffs for packets to transmit */ - unsigned int tx_laddr[SONIC_NUM_TDS]; /* logical DMA address fro skbuffs */ - unsigned char *rba; /* start of receive buffer areas */ - unsigned int cda_laddr; /* logical DMA address of CDA */ - unsigned int tda_laddr; /* logical DMA address of TDA */ - unsigned int rra_laddr; /* logical DMA address of RRA */ - unsigned int rda_laddr; /* logical DMA address of RDA */ - unsigned int rba_laddr; /* logical DMA address of RBA */ - unsigned int cur_rra; /* current indexes to resource areas */ + /* Bus size. 0 == 16 bits, 1 == 32 bits. */ + int dma_bitmode; + /* Register offset within the longword (independent of endianness, + and varies from one type of Macintosh SONIC to another + (Aarrgh)) */ + int reg_offset; + void *descriptors; + /* Crud. These areas have to be within the same 64K. Therefore + we allocate a desriptors page, and point these to places within it. */ + void *cda; /* CAM descriptor area */ + void *tda; /* Transmit descriptor area */ + void *rra; /* Receive resource area */ + void *rda; /* Receive descriptor area */ + struct sk_buff* volatile rx_skb[SONIC_NUM_RRS]; /* packets to be received */ + struct sk_buff* volatile tx_skb[SONIC_NUM_TDS]; /* packets to be transmitted */ + unsigned int tx_len[SONIC_NUM_TDS]; /* lengths of tx DMA mappings */ + /* Logical DMA addresses on MIPS, bus addresses on m68k + * (so "laddr" is a bit misleading) */ + dma_addr_t descriptors_laddr; + u32 cda_laddr; /* logical DMA address of CDA */ + u32 tda_laddr; /* logical DMA address of TDA */ + u32 rra_laddr; /* logical DMA address of RRA */ + u32 rda_laddr; /* logical DMA address of RDA */ + dma_addr_t rx_laddr[SONIC_NUM_RRS]; /* logical DMA addresses of rx skbuffs */ + dma_addr_t tx_laddr[SONIC_NUM_TDS]; /* logical DMA addresses of tx skbuffs */ + unsigned int rra_end; + unsigned int cur_rwp; unsigned int cur_rx; - unsigned int cur_tx; - unsigned int dirty_tx; /* last unacked transmit packet */ - char tx_full; + unsigned int cur_tx; /* first unacked transmit packet */ + unsigned int eol_rx; + unsigned int eol_tx; /* last unacked transmit packet */ + unsigned int next_tx; /* next free TD */ + struct device *device; /* generic device */ struct net_device_stats stats; }; -#define TX_TIMEOUT 6 +#define TX_TIMEOUT (3 * HZ) /* Index to functions, as function prototypes. */ @@ -477,6 +337,114 @@ static void sonic_multicast_list(struct net_device *dev); static int sonic_init(struct net_device *dev); static void sonic_tx_timeout(struct net_device *dev); +/* Internal inlines for reading/writing DMA buffers. Note that bus + size and endianness matter here, whereas they don't for registers, + as far as we can tell. */ +/* OpenBSD calls this "SWO". I'd like to think that sonic_buf_put() + is a much better name. */ +static inline void sonic_buf_put(void* base, int bitmode, + int offset, __u16 val) +{ + if (bitmode) +#ifdef __BIG_ENDIAN + ((__u16 *) base + (offset*2))[1] = val; +#else + ((__u16 *) base + (offset*2))[0] = val; +#endif + else + ((__u16 *) base)[offset] = val; +} + +static inline __u16 sonic_buf_get(void* base, int bitmode, + int offset) +{ + if (bitmode) +#ifdef __BIG_ENDIAN + return ((volatile __u16 *) base + (offset*2))[1]; +#else + return ((volatile __u16 *) base + (offset*2))[0]; +#endif + else + return ((volatile __u16 *) base)[offset]; +} + +/* Inlines that you should actually use for reading/writing DMA buffers */ +static inline void sonic_cda_put(struct net_device* dev, int entry, + int offset, __u16 val) +{ + struct sonic_local* lp = (struct sonic_local *) dev->priv; + sonic_buf_put(lp->cda, lp->dma_bitmode, + (entry * SIZEOF_SONIC_CD) + offset, val); +} + +static inline __u16 sonic_cda_get(struct net_device* dev, int entry, + int offset) +{ + struct sonic_local* lp = (struct sonic_local *) dev->priv; + return sonic_buf_get(lp->cda, lp->dma_bitmode, + (entry * SIZEOF_SONIC_CD) + offset); +} + +static inline void sonic_set_cam_enable(struct net_device* dev, __u16 val) +{ + struct sonic_local* lp = (struct sonic_local *) dev->priv; + sonic_buf_put(lp->cda, lp->dma_bitmode, SONIC_CDA_CAM_ENABLE, val); +} + +static inline __u16 sonic_get_cam_enable(struct net_device* dev) +{ + struct sonic_local* lp = (struct sonic_local *) dev->priv; + return sonic_buf_get(lp->cda, lp->dma_bitmode, SONIC_CDA_CAM_ENABLE); +} + +static inline void sonic_tda_put(struct net_device* dev, int entry, + int offset, __u16 val) +{ + struct sonic_local* lp = (struct sonic_local *) dev->priv; + sonic_buf_put(lp->tda, lp->dma_bitmode, + (entry * SIZEOF_SONIC_TD) + offset, val); +} + +static inline __u16 sonic_tda_get(struct net_device* dev, int entry, + int offset) +{ + struct sonic_local* lp = (struct sonic_local *) dev->priv; + return sonic_buf_get(lp->tda, lp->dma_bitmode, + (entry * SIZEOF_SONIC_TD) + offset); +} + +static inline void sonic_rda_put(struct net_device* dev, int entry, + int offset, __u16 val) +{ + struct sonic_local* lp = (struct sonic_local *) dev->priv; + sonic_buf_put(lp->rda, lp->dma_bitmode, + (entry * SIZEOF_SONIC_RD) + offset, val); +} + +static inline __u16 sonic_rda_get(struct net_device* dev, int entry, + int offset) +{ + struct sonic_local* lp = (struct sonic_local *) dev->priv; + return sonic_buf_get(lp->rda, lp->dma_bitmode, + (entry * SIZEOF_SONIC_RD) + offset); +} + +static inline void sonic_rra_put(struct net_device* dev, int entry, + int offset, __u16 val) +{ + struct sonic_local* lp = (struct sonic_local *) dev->priv; + sonic_buf_put(lp->rra, lp->dma_bitmode, + (entry * SIZEOF_SONIC_RR) + offset, val); +} + +static inline __u16 sonic_rra_get(struct net_device* dev, int entry, + int offset) +{ + struct sonic_local* lp = (struct sonic_local *) dev->priv; + return sonic_buf_get(lp->rra, lp->dma_bitmode, + (entry * SIZEOF_SONIC_RR) + offset); +} + static const char *version = "sonic.c:v0.92 20.9.98 tsbogend@alpha.franken.de\n"; -- cgit v1.2.1 From 8531c5ffbca65f6df868637c26e6df6f88bff738 Mon Sep 17 00:00:00 2001 From: Arthur Kepner Date: Tue, 23 Aug 2005 01:34:53 -0400 Subject: [PATCH] bonding: inherit zero-copy flags of slaves This change allows a bonding device to inherit the "zero-copy" features of its slave devices. It was inspired by a couple of previous postings on this topic: http://marc.theaimsgroup.com/?l=bonding-devel&m=111924607327794&w=2 http://marc.theaimsgroup.com/?l=bonding-devel&m=111925242706297&w=2 and it's largely a combination of the patches that appear in those emails. Signed-off-by: Arthur Kepner --- drivers/net/bonding/bond_main.c | 58 ++++++++++++++++++++++++++++++++++++++++- drivers/net/bonding/bonding.h | 3 +++ 2 files changed, 60 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 2c930da90a85..94c9f68dd16b 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1604,6 +1604,44 @@ static int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_ return 0; } +#define BOND_INTERSECT_FEATURES \ + (NETIF_F_SG|NETIF_F_IP_CSUM|NETIF_F_NO_CSUM|NETIF_F_HW_CSUM) + +/* + * Compute the features available to the bonding device by + * intersection of all of the slave devices' BOND_INTERSECT_FEATURES. + * Call this after attaching or detaching a slave to update the + * bond's features. + */ +static int bond_compute_features(struct bonding *bond) +{ + int i; + struct slave *slave; + struct net_device *bond_dev = bond->dev; + int features = bond->bond_features; + + bond_for_each_slave(bond, slave, i) { + struct net_device * slave_dev = slave->dev; + if (i == 0) { + features |= BOND_INTERSECT_FEATURES; + } + features &= + ~(~slave_dev->features & BOND_INTERSECT_FEATURES); + } + + /* turn off NETIF_F_SG if we need a csum and h/w can't do it */ + if ((features & NETIF_F_SG) && + !(features & (NETIF_F_IP_CSUM | + NETIF_F_NO_CSUM | + NETIF_F_HW_CSUM))) { + features &= ~NETIF_F_SG; + } + + bond_dev->features = features; + + return 0; +} + /* enslave device to bond device */ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) { @@ -1811,6 +1849,8 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de new_slave->delay = 0; new_slave->link_failure_count = 0; + bond_compute_features(bond); + if (bond->params.miimon && !bond->params.use_carrier) { link_reporting = bond_check_dev_link(bond, slave_dev, 1); @@ -2015,7 +2055,7 @@ err_free: err_undo_flags: bond_dev->features = old_features; - + return res; } @@ -2100,6 +2140,8 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de /* release the slave from its bond */ bond_detach_slave(bond, slave); + bond_compute_features(bond); + if (bond->primary_slave == slave) { bond->primary_slave = NULL; } @@ -2243,6 +2285,8 @@ static int bond_release_all(struct net_device *bond_dev) bond_alb_deinit_slave(bond, slave); } + bond_compute_features(bond); + /* now that the slave is detached, unlock and perform * all the undo steps that should not be called from * within a lock. @@ -3588,6 +3632,7 @@ static int bond_master_netdev_event(unsigned long event, struct net_device *bond static int bond_slave_netdev_event(unsigned long event, struct net_device *slave_dev) { struct net_device *bond_dev = slave_dev->master; + struct bonding *bond = bond_dev->priv; switch (event) { case NETDEV_UNREGISTER: @@ -3626,6 +3671,9 @@ static int bond_slave_netdev_event(unsigned long event, struct net_device *slave * TODO: handle changing the primary's name */ break; + case NETDEV_FEAT_CHANGE: + bond_compute_features(bond); + break; default: break; } @@ -4526,6 +4574,11 @@ static inline void bond_set_mode_ops(struct bonding *bond, int mode) } } +static struct ethtool_ops bond_ethtool_ops = { + .get_tx_csum = ethtool_op_get_tx_csum, + .get_sg = ethtool_op_get_sg, +}; + /* * Does not allocate but creates a /proc entry. * Allowed to fail. @@ -4555,6 +4608,7 @@ static int __init bond_init(struct net_device *bond_dev, struct bond_params *par bond_dev->stop = bond_close; bond_dev->get_stats = bond_get_stats; bond_dev->do_ioctl = bond_do_ioctl; + bond_dev->ethtool_ops = &bond_ethtool_ops; bond_dev->set_multicast_list = bond_set_multicast_list; bond_dev->change_mtu = bond_change_mtu; bond_dev->set_mac_address = bond_set_mac_address; @@ -4591,6 +4645,8 @@ static int __init bond_init(struct net_device *bond_dev, struct bond_params *par NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER); + bond->bond_features = bond_dev->features; + #ifdef CONFIG_PROC_FS bond_create_proc_entry(bond); #endif diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index d27f377b3eeb..388196980862 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -211,6 +211,9 @@ struct bonding { struct bond_params params; struct list_head vlan_list; struct vlan_group *vlgrp; + /* the features the bonding device supports, independently + * of any slaves */ + int bond_features; }; /** -- cgit v1.2.1 From b8f6153ee421014f42b620238f4203a4106db309 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 25 Aug 2005 22:01:20 -0400 Subject: libata: fix EH locking Wrap ata_qc_complete() calls in EH context in spinlocks, to prevent races (mainly in ATAPI code paths). --- drivers/scsi/ahci.c | 7 ++++++- drivers/scsi/libata-core.c | 14 ++++++++++++-- drivers/scsi/sata_promise.c | 5 +++++ drivers/scsi/sata_sx4.c | 5 +++++ 4 files changed, 28 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 348493982b56..841f4e2cfe08 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -586,12 +586,16 @@ static void ahci_intr_error(struct ata_port *ap, u32 irq_stat) static void ahci_eng_timeout(struct ata_port *ap) { - void *mmio = ap->host_set->mmio_base; + struct ata_host_set *host_set = ap->host_set; + void *mmio = host_set->mmio_base; void *port_mmio = ahci_port_base(mmio, ap->port_no); struct ata_queued_cmd *qc; + unsigned long flags; DPRINTK("ENTER\n"); + spin_lock_irqsave(&host_set->lock, flags); + ahci_intr_error(ap, readl(port_mmio + PORT_IRQ_STAT)); qc = ata_qc_from_tag(ap, ap->active_tag); @@ -609,6 +613,7 @@ static void ahci_eng_timeout(struct ata_port *ap) ata_qc_complete(qc, ATA_ERR); } + spin_unlock_irqrestore(&host_set->lock, flags); } static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 157a3e914cb7..ec7bff73ae18 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2388,12 +2388,13 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) { struct ata_port *ap = qc->ap; + unsigned long flags; - spin_lock_irq(&ap->host_set->lock); + spin_lock_irqsave(&ap->host_set->lock, flags); ap->flags &= ~ATA_FLAG_NOINTR; ata_irq_on(ap); ata_qc_complete(qc, drv_stat); - spin_unlock_irq(&ap->host_set->lock); + spin_unlock_irqrestore(&ap->host_set->lock, flags); } /** @@ -2973,8 +2974,10 @@ static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, static void ata_qc_timeout(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; + struct ata_host_set *host_set = ap->host_set; struct ata_device *dev = qc->dev; u8 host_stat = 0, drv_stat; + unsigned long flags; DPRINTK("ENTER\n"); @@ -2985,7 +2988,9 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) if (!(cmd->eh_eflags & SCSI_EH_CANCEL_CMD)) { /* finish completing original command */ + spin_lock_irqsave(&host_set->lock, flags); __ata_qc_complete(qc); + spin_unlock_irqrestore(&host_set->lock, flags); atapi_request_sense(ap, dev, cmd); @@ -2996,6 +3001,8 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) } } + spin_lock_irqsave(&host_set->lock, flags); + /* hack alert! We cannot use the supplied completion * function from inside the ->eh_strategy_handler() thread. * libata is the only user of ->eh_strategy_handler() in @@ -3029,6 +3036,9 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) ata_qc_complete(qc, drv_stat); break; } + + spin_unlock_irqrestore(&host_set->lock, flags); + out: DPRINTK("EXIT\n"); } diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index defcc1fb3f16..b8dc49fed769 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -325,11 +325,15 @@ static void pdc_qc_prep(struct ata_queued_cmd *qc) static void pdc_eng_timeout(struct ata_port *ap) { + struct ata_host_set *host_set = ap->host_set; u8 drv_stat; struct ata_queued_cmd *qc; + unsigned long flags; DPRINTK("ENTER\n"); + spin_lock_irqsave(&host_set->lock, flags); + qc = ata_qc_from_tag(ap, ap->active_tag); if (!qc) { printk(KERN_ERR "ata%u: BUG: timeout without command\n", @@ -363,6 +367,7 @@ static void pdc_eng_timeout(struct ata_port *ap) } out: + spin_unlock_irqrestore(&host_set->lock, flags); DPRINTK("EXIT\n"); } diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index e2db499f22dd..a20d4285090a 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -848,10 +848,14 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_re static void pdc_eng_timeout(struct ata_port *ap) { u8 drv_stat; + struct ata_host_set *host_set = ap->host_set; struct ata_queued_cmd *qc; + unsigned long flags; DPRINTK("ENTER\n"); + spin_lock_irqsave(&host_set->lock, flags); + qc = ata_qc_from_tag(ap, ap->active_tag); if (!qc) { printk(KERN_ERR "ata%u: BUG: timeout without command\n", @@ -885,6 +889,7 @@ static void pdc_eng_timeout(struct ata_port *ap) } out: + spin_unlock_irqrestore(&host_set->lock, flags); DPRINTK("EXIT\n"); } -- cgit v1.2.1 From 31433ea369d250ad011577eee6110d3efcb9d861 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 26 Aug 2005 15:56:47 +0100 Subject: [PATCH] libata: typo You spelt heuristic wrongly. Also reformatted to 80 columns, ignore the diff and fix the typo if you prefer that. Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index ec7bff73ae18..19b45c2bfa26 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2459,11 +2459,10 @@ static void ata_pio_complete (struct ata_port *ap) u8 drv_stat; /* - * This is purely hueristic. This is a fast path. - * Sometimes when we enter, BSY will be cleared in - * a chk-status or two. If not, the drive is probably seeking - * or something. Snooze for a couple msecs, then - * chk-status again. If still busy, fall back to + * This is purely heuristic. This is a fast path. Sometimes when + * we enter, BSY will be cleared in a chk-status or two. If not, + * the drive is probably seeking or something. Snooze for a couple + * msecs, then chk-status again. If still busy, fall back to * PIO_ST_POLL state. */ drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10); -- cgit v1.2.1 From b73fc89f6d1f84326e5e897ad249d00a9f218fd7 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 26 Aug 2005 16:03:19 +0100 Subject: [PATCH] libata: regularize dma_start/stop arguments Needed for a few PATA drivers. Also fix up a wrong comment. Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 11 ++++++----- drivers/scsi/sata_qstor.c | 4 ++-- 2 files changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 19b45c2bfa26..f15a07f9f471 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3017,7 +3017,7 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) host_stat = ap->ops->bmdma_status(ap); /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(ap); + ap->ops->bmdma_stop(qc); /* fall through */ @@ -3399,7 +3399,7 @@ static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc) } /** - * ata_bmdma_start - Start a PCI IDE BMDMA transaction + * ata_bmdma_start_mmio - Start a PCI IDE BMDMA transaction * @qc: Info associated with this ATA transaction. * * LOCKING: @@ -3570,7 +3570,7 @@ u8 ata_bmdma_status(struct ata_port *ap) /** * ata_bmdma_stop - Stop PCI IDE BMDMA transfer - * @ap: Port associated with this ATA transaction. + * @qc: Command we are ending DMA for * * Clears the ATA_DMA_START flag in the dma control register * @@ -3580,8 +3580,9 @@ u8 ata_bmdma_status(struct ata_port *ap) * spin_lock_irqsave(host_set lock) */ -void ata_bmdma_stop(struct ata_port *ap) +void ata_bmdma_stop(struct ata_queued_cmd *qc) { + struct ata_port *ap = qc->ap; if (ap->flags & ATA_FLAG_MMIO) { void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; @@ -3633,7 +3634,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, goto idle_irq; /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(ap); + ap->ops->bmdma_stop(qc); /* fall through */ diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 08a84042ce09..2926846cdd6a 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -117,7 +117,7 @@ static void qs_phy_reset(struct ata_port *ap); static void qs_qc_prep(struct ata_queued_cmd *qc); static int qs_qc_issue(struct ata_queued_cmd *qc); static int qs_check_atapi_dma(struct ata_queued_cmd *qc); -static void qs_bmdma_stop(struct ata_port *ap); +static void qs_bmdma_stop(struct ata_queued_cmd *qc); static u8 qs_bmdma_status(struct ata_port *ap); static void qs_irq_clear(struct ata_port *ap); static void qs_eng_timeout(struct ata_port *ap); @@ -198,7 +198,7 @@ static int qs_check_atapi_dma(struct ata_queued_cmd *qc) return 1; /* ATAPI DMA not supported */ } -static void qs_bmdma_stop(struct ata_port *ap) +static void qs_bmdma_stop(struct ata_queud_cmd *qc) { /* nothing */ } -- cgit v1.2.1 From 953d1137fc4aba16deace262e93974913596dcfe Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 26 Aug 2005 19:46:24 -0400 Subject: [libata sata_sil] list documentation URL, since its public --- drivers/scsi/sata_sil.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index e6902645f397..9d24d6c328b4 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -24,6 +24,11 @@ * If you do not delete the provisions above, a recipient may use your * version of this file under either the OSL or the GPL. * + * Documentation for SiI 3112: + * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2 + * + * Other errata and documentation available under NDA. + * */ #include -- cgit v1.2.1 From bebf4688e9dbbfdd421736685d607bced91a3c91 Mon Sep 17 00:00:00 2001 From: "Mark M. Hoffman" Date: Fri, 26 Aug 2005 18:34:08 -0700 Subject: [PATCH] I2C hwmon: kfree fixes This patch fixes several instances of hwmon drivers kfree'ing the "wrong" pointer; the existing code works somewhat by accident. (akpm: plucked from Greg's queue based on lkml discussion. Finishes off the patch from Jon Corbet) Signed-off-by: Mark M. Hoffman Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/adm1026.c | 2 +- drivers/hwmon/adm1031.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index ded6e8adc854..c8a7f47911f9 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -325,7 +325,7 @@ int adm1026_attach_adapter(struct i2c_adapter *adapter) int adm1026_detach_client(struct i2c_client *client) { i2c_detach_client(client); - kfree(client); + kfree(i2c_get_clientdata(client)); return 0; } diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index 4211c8b4601a..936250957270 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -845,7 +845,7 @@ static int adm1031_detach_client(struct i2c_client *client) if ((ret = i2c_detach_client(client)) != 0) { return ret; } - kfree(client); + kfree(i2c_get_clientdata(client)); return 0; } -- cgit v1.2.1 From e1bcfcaa0b3bec2a67b22c565a0bf508ea90db1d Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 26 Aug 2005 18:34:14 -0700 Subject: [PATCH] IB: fix use-after-free in user verbs cleanup Fix a use-after-free bug in userspace verbs cleanup: we can't touch mr->device after we free mr by calling ib_dereg_mr(). Signed-off-by: Roland Dreier Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/infiniband/core/uverbs_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index eb99e693dec2..5f6e9ea29cd7 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -130,13 +130,14 @@ static int ib_dealloc_ucontext(struct ib_ucontext *context) list_for_each_entry_safe(uobj, tmp, &context->mr_list, list) { struct ib_mr *mr = idr_find(&ib_uverbs_mr_idr, uobj->id); + struct ib_device *mrdev = mr->device; struct ib_umem_object *memobj; idr_remove(&ib_uverbs_mr_idr, uobj->id); ib_dereg_mr(mr); memobj = container_of(uobj, struct ib_umem_object, uobject); - ib_umem_release_on_close(mr->device, &memobj->umem); + ib_umem_release_on_close(mrdev, &memobj->umem); list_del(&uobj->list); kfree(memobj); -- cgit v1.2.1 From 72008652dae7d10fa668d7b2ada3bddff7403d86 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 26 Aug 2005 18:34:15 -0700 Subject: [PATCH] md: create a MODULE_ALIAS for md corresponding to its block major number. I just discovered this is needed for module auto-loading. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/md.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 486ee50cfdda..deccd560c0de 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4011,3 +4011,4 @@ EXPORT_SYMBOL(md_print_devices); EXPORT_SYMBOL(md_check_recovery); MODULE_LICENSE("GPL"); MODULE_ALIAS("md"); +MODULE_ALIAS_BLOCKDEV_MAJOR(MD_MAJOR); -- cgit v1.2.1 From 657390d25d4241705cb4fc5b3b4ba5b30575dc17 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 26 Aug 2005 18:34:16 -0700 Subject: [PATCH] md: clear the 'recovery' flags when starting an md array. It's possible for this to still have flags in it and a previous instance has been stopped, and that confused the new array using the same mddev. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/md.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index deccd560c0de..20ca80b7dc20 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1689,6 +1689,7 @@ static int do_md_run(mddev_t * mddev) mddev->pers = pers[pnum]; spin_unlock(&pers_lock); + mddev->recovery = 0; mddev->resync_max_sectors = mddev->size << 1; /* may be over-ridden by personality */ /* before we start the array running, initialise the bitmap */ -- cgit v1.2.1 From 49f6a7fbe123dde25ca4193a7d60705784e18317 Mon Sep 17 00:00:00 2001 From: Tziporet Koren Date: Wed, 10 Aug 2005 23:00:50 -0700 Subject: [PATCH] IB: Update current firmware versions in mthca driver Update FW versions in mthca according to July 05 Mellanox release Signed-off-by: Tziporet Koren Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 2ef916859e17..687544157307 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -887,9 +887,9 @@ static struct { int is_memfree; int is_pcie; } mthca_hca_table[] = { - [TAVOR] = { .latest_fw = MTHCA_FW_VER(3, 3, 2), .is_memfree = 0, .is_pcie = 0 }, - [ARBEL_COMPAT] = { .latest_fw = MTHCA_FW_VER(4, 6, 2), .is_memfree = 0, .is_pcie = 1 }, - [ARBEL_NATIVE] = { .latest_fw = MTHCA_FW_VER(5, 0, 1), .is_memfree = 1, .is_pcie = 1 }, + [TAVOR] = { .latest_fw = MTHCA_FW_VER(3, 3, 3), .is_memfree = 0, .is_pcie = 0 }, + [ARBEL_COMPAT] = { .latest_fw = MTHCA_FW_VER(4, 7, 0), .is_memfree = 0, .is_pcie = 1 }, + [ARBEL_NATIVE] = { .latest_fw = MTHCA_FW_VER(5, 1, 0), .is_memfree = 1, .is_pcie = 1 }, [SINAI] = { .latest_fw = MTHCA_FW_VER(1, 0, 1), .is_memfree = 1, .is_pcie = 1 } }; -- cgit v1.2.1 From 2a1d9b7f09aaaacf235656cb32a40ba2c79590b3 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 10 Aug 2005 23:03:10 -0700 Subject: [PATCH] IB: Add copyright notices Make some lawyers happy and add copyright notices for people who forgot to include them when they actually touched the code. Signed-off-by: Roland Dreier --- drivers/infiniband/core/agent.c | 11 ++++++----- drivers/infiniband/core/agent_priv.h | 10 +++++----- drivers/infiniband/core/cache.c | 3 +++ drivers/infiniband/core/device.c | 1 + drivers/infiniband/core/packer.c | 1 + drivers/infiniband/core/sa_query.c | 2 +- drivers/infiniband/core/smi.c | 11 ++++++----- drivers/infiniband/core/sysfs.c | 2 ++ drivers/infiniband/core/ud_header.c | 1 + drivers/infiniband/core/user_mad.c | 2 +- drivers/infiniband/core/uverbs.h | 2 ++ drivers/infiniband/core/uverbs_main.c | 2 ++ drivers/infiniband/core/uverbs_mem.c | 1 + drivers/infiniband/core/verbs.c | 1 + drivers/infiniband/hw/mthca/mthca_cmd.c | 1 + drivers/infiniband/hw/mthca/mthca_cmd.h | 1 + drivers/infiniband/hw/mthca/mthca_config_reg.h | 1 + drivers/infiniband/hw/mthca/mthca_cq.c | 2 ++ drivers/infiniband/hw/mthca/mthca_dev.h | 2 ++ drivers/infiniband/hw/mthca/mthca_doorbell.h | 1 + drivers/infiniband/hw/mthca/mthca_eq.c | 1 + drivers/infiniband/hw/mthca/mthca_mad.c | 2 ++ drivers/infiniband/hw/mthca/mthca_main.c | 1 + drivers/infiniband/hw/mthca/mthca_memfree.c | 1 + drivers/infiniband/hw/mthca/mthca_memfree.h | 1 + drivers/infiniband/hw/mthca/mthca_mr.c | 1 + drivers/infiniband/hw/mthca/mthca_pd.c | 1 + drivers/infiniband/hw/mthca/mthca_profile.c | 1 + drivers/infiniband/hw/mthca/mthca_profile.h | 1 + drivers/infiniband/hw/mthca/mthca_provider.c | 2 ++ drivers/infiniband/hw/mthca/mthca_provider.h | 1 + drivers/infiniband/hw/mthca/mthca_qp.c | 2 ++ drivers/infiniband/include/ib_cache.h | 2 ++ drivers/infiniband/include/ib_verbs.h | 1 + drivers/infiniband/ulp/ipoib/ipoib.h | 2 ++ drivers/infiniband/ulp/ipoib/ipoib_ib.c | 3 +++ drivers/infiniband/ulp/ipoib/ipoib_main.c | 2 ++ drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 2 ++ drivers/infiniband/ulp/ipoib/ipoib_verbs.c | 1 + 39 files changed, 69 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/agent.c b/drivers/infiniband/core/agent.c index 729f0b0d983a..3d36feb8c5ba 100644 --- a/drivers/infiniband/core/agent.c +++ b/drivers/infiniband/core/agent.c @@ -1,9 +1,10 @@ /* - * Copyright (c) 2004 Mellanox Technologies Ltd. All rights reserved. - * Copyright (c) 2004 Infinicon Corporation. All rights reserved. - * Copyright (c) 2004 Intel Corporation. All rights reserved. - * Copyright (c) 2004 Topspin Corporation. All rights reserved. - * Copyright (c) 2004 Voltaire Corporation. All rights reserved. + * Copyright (c) 2004, 2005 Mellanox Technologies Ltd. All rights reserved. + * Copyright (c) 2004, 2005 Infinicon Corporation. All rights reserved. + * Copyright (c) 2004, 2005 Intel Corporation. All rights reserved. + * Copyright (c) 2004, 2005 Topspin Corporation. All rights reserved. + * Copyright (c) 2004, 2005 Voltaire Corporation. All rights reserved. + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/core/agent_priv.h b/drivers/infiniband/core/agent_priv.h index 17435af1e914..2ec6d7f1b7d0 100644 --- a/drivers/infiniband/core/agent_priv.h +++ b/drivers/infiniband/core/agent_priv.h @@ -1,9 +1,9 @@ /* - * Copyright (c) 2004 Mellanox Technologies Ltd. All rights reserved. - * Copyright (c) 2004 Infinicon Corporation. All rights reserved. - * Copyright (c) 2004 Intel Corporation. All rights reserved. - * Copyright (c) 2004 Topspin Corporation. All rights reserved. - * Copyright (c) 2004 Voltaire Corporation. All rights reserved. + * Copyright (c) 2004, 2005 Mellanox Technologies Ltd. All rights reserved. + * Copyright (c) 2004, 2005 Infinicon Corporation. All rights reserved. + * Copyright (c) 2004, 2005 Intel Corporation. All rights reserved. + * Copyright (c) 2004, 2005 Topspin Corporation. All rights reserved. + * Copyright (c) 2004, 2005 Voltaire Corporation. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/core/cache.c b/drivers/infiniband/core/cache.c index 3042360c97e1..3a129db5ec27 100644 --- a/drivers/infiniband/core/cache.c +++ b/drivers/infiniband/core/cache.c @@ -1,5 +1,8 @@ /* * Copyright (c) 2004 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Intel Corporation. All rights reserved. + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. + * Copyright (c) 2005 Voltaire, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c index 9197e92d708a..d3cf84e01587 100644 --- a/drivers/infiniband/core/device.c +++ b/drivers/infiniband/core/device.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2004 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/core/packer.c b/drivers/infiniband/core/packer.c index eb5ff54c10d7..ed1684b09f92 100644 --- a/drivers/infiniband/core/packer.c +++ b/drivers/infiniband/core/packer.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2004 Topspin Corporation. All rights reserved. + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c index 795184931c83..b03bed2ed87a 100644 --- a/drivers/infiniband/core/sa_query.c +++ b/drivers/infiniband/core/sa_query.c @@ -1,6 +1,6 @@ /* * Copyright (c) 2004 Topspin Communications. All rights reserved. - * Copyright (c) 2005 Voltaire, Inc. All rights reserved. + * Copyright (c) 2005 Voltaire, Inc.  All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/core/smi.c b/drivers/infiniband/core/smi.c index b4b284324a33..1c0d733c3fce 100644 --- a/drivers/infiniband/core/smi.c +++ b/drivers/infiniband/core/smi.c @@ -1,9 +1,10 @@ /* - * Copyright (c) 2004 Mellanox Technologies Ltd. All rights reserved. - * Copyright (c) 2004 Infinicon Corporation. All rights reserved. - * Copyright (c) 2004 Intel Corporation. All rights reserved. - * Copyright (c) 2004 Topspin Corporation. All rights reserved. - * Copyright (c) 2004 Voltaire Corporation. All rights reserved. + * Copyright (c) 2004, 2005 Mellanox Technologies Ltd. All rights reserved. + * Copyright (c) 2004, 2005 Infinicon Corporation. All rights reserved. + * Copyright (c) 2004, 2005 Intel Corporation. All rights reserved. + * Copyright (c) 2004, 2005 Topspin Corporation. All rights reserved. + * Copyright (c) 2004, 2005 Voltaire Corporation. All rights reserved. + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index 90d51b179abe..b2e779996cbe 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -1,5 +1,7 @@ /* * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies Ltd. All rights reserved. + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/core/ud_header.c b/drivers/infiniband/core/ud_header.c index dc4eb1db5e96..b32d43ec0a33 100644 --- a/drivers/infiniband/core/ud_header.c +++ b/drivers/infiniband/core/ud_header.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2004 Topspin Corporation. All rights reserved. + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index 2e38792df533..8a19dd4d38f8 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -1,6 +1,6 @@ /* * Copyright (c) 2004 Topspin Communications. All rights reserved. - * Copyright (c) 2005 Voltaire, Inc. All rights reserved. + * Copyright (c) 2005 Voltaire, Inc. All rights reserved. * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. * * This software is available to you under a choice of one of two diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h index 7696022f9a4e..3e158f5acfc6 100644 --- a/drivers/infiniband/core/uverbs.h +++ b/drivers/infiniband/core/uverbs.h @@ -1,6 +1,8 @@ /* * Copyright (c) 2005 Topspin Communications. All rights reserved. * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. + * Copyright (c) 2005 Voltaire, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index 5f6e9ea29cd7..fd8e96359304 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -1,6 +1,8 @@ /* * Copyright (c) 2005 Topspin Communications. All rights reserved. * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. + * Copyright (c) 2005 Voltaire, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/core/uverbs_mem.c b/drivers/infiniband/core/uverbs_mem.c index ed550f6595bd..36a32c315668 100644 --- a/drivers/infiniband/core/uverbs_mem.c +++ b/drivers/infiniband/core/uverbs_mem.c @@ -1,6 +1,7 @@ /* * Copyright (c) 2005 Topspin Communications. All rights reserved. * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c index 506fdf1f2a26..c301a2c41f34 100644 --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -4,6 +4,7 @@ * Copyright (c) 2004 Intel Corporation. All rights reserved. * Copyright (c) 2004 Topspin Corporation. All rights reserved. * Copyright (c) 2004 Voltaire Corporation. All rights reserved. + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. * Copyright (c) 2005 Cisco Systems. All rights reserved. * * This software is available to you under a choice of one of two diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index 1557a522d831..0ff5900e0930 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.h b/drivers/infiniband/hw/mthca/mthca_cmd.h index ed517f175dd6..75a629639445 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.h +++ b/drivers/infiniband/hw/mthca/mthca_cmd.h @@ -1,5 +1,6 @@ /* * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/mthca/mthca_config_reg.h b/drivers/infiniband/hw/mthca/mthca_config_reg.h index b4bfbbfe2c3d..afa56bfaab2e 100644 --- a/drivers/infiniband/hw/mthca/mthca_config_reg.h +++ b/drivers/infiniband/hw/mthca/mthca_config_reg.h @@ -1,5 +1,6 @@ /* * Copyright (c) 2004 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/mthca/mthca_cq.c b/drivers/infiniband/hw/mthca/mthca_cq.c index 5687c3014522..bd7807cec50c 100644 --- a/drivers/infiniband/hw/mthca/mthca_cq.c +++ b/drivers/infiniband/hw/mthca/mthca_cq.c @@ -2,6 +2,8 @@ * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. * Copyright (c) 2005 Cisco Systems, Inc. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. + * Copyright (c) 2004 Voltaire, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index 5ecdd2eeeb0f..33162a960c72 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -2,6 +2,8 @@ * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. + * Copyright (c) 2004 Voltaire, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/mthca/mthca_doorbell.h b/drivers/infiniband/hw/mthca/mthca_doorbell.h index 535fad7710fb..3be4a4a606a2 100644 --- a/drivers/infiniband/hw/mthca/mthca_doorbell.h +++ b/drivers/infiniband/hw/mthca/mthca_doorbell.h @@ -1,6 +1,7 @@ /* * Copyright (c) 2004 Topspin Communications. All rights reserved. * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c index cbcf2b4722e4..54a809adab6d 100644 --- a/drivers/infiniband/hw/mthca/mthca_eq.c +++ b/drivers/infiniband/hw/mthca/mthca_eq.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/mthca/mthca_mad.c b/drivers/infiniband/hw/mthca/mthca_mad.c index 7df223642015..3c7fae6cb12f 100644 --- a/drivers/infiniband/hw/mthca/mthca_mad.c +++ b/drivers/infiniband/hw/mthca/mthca_mad.c @@ -1,5 +1,7 @@ /* * Copyright (c) 2004 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. + * Copyright (c) 2004 Voltaire, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 687544157307..2d539403bdac 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -1,6 +1,7 @@ /* * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c index 2a8646150355..9efb0322c761 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.c +++ b/drivers/infiniband/hw/mthca/mthca_memfree.c @@ -1,6 +1,7 @@ /* * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.h b/drivers/infiniband/hw/mthca/mthca_memfree.h index 4761d844cb5f..59c2f555b13b 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.h +++ b/drivers/infiniband/hw/mthca/mthca_memfree.h @@ -1,6 +1,7 @@ /* * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c index cbe50feaf680..15d9f8f290a0 100644 --- a/drivers/infiniband/hw/mthca/mthca_mr.c +++ b/drivers/infiniband/hw/mthca/mthca_mr.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2004 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/mthca/mthca_pd.c b/drivers/infiniband/hw/mthca/mthca_pd.c index c2c899844e98..3dbf06a6e6f4 100644 --- a/drivers/infiniband/hw/mthca/mthca_pd.c +++ b/drivers/infiniband/hw/mthca/mthca_pd.c @@ -1,6 +1,7 @@ /* * Copyright (c) 2004 Topspin Communications. All rights reserved. * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/mthca/mthca_profile.c b/drivers/infiniband/hw/mthca/mthca_profile.c index 4fedc32d5871..9b280661f2a1 100644 --- a/drivers/infiniband/hw/mthca/mthca_profile.c +++ b/drivers/infiniband/hw/mthca/mthca_profile.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/mthca/mthca_profile.h b/drivers/infiniband/hw/mthca/mthca_profile.h index 17aef3357661..0d4f070a3fa1 100644 --- a/drivers/infiniband/hw/mthca/mthca_profile.h +++ b/drivers/infiniband/hw/mthca/mthca_profile.h @@ -1,5 +1,6 @@ /* * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 81919a7b4935..34e6b8685ba3 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -2,6 +2,8 @@ * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. + * Copyright (c) 2004 Voltaire, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/mthca/mthca_provider.h b/drivers/infiniband/hw/mthca/mthca_provider.h index 1d032791cc8b..727aad8d4f33 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.h +++ b/drivers/infiniband/hw/mthca/mthca_provider.h @@ -1,6 +1,7 @@ /* * Copyright (c) 2004 Topspin Communications. All rights reserved. * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index f7126b14d5ae..2f429815d195 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -1,6 +1,8 @@ /* * Copyright (c) 2004 Topspin Communications. All rights reserved. * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. + * Copyright (c) 2004 Voltaire, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/include/ib_cache.h b/drivers/infiniband/include/ib_cache.h index 44ef6bb9b9df..fff031bc95df 100644 --- a/drivers/infiniband/include/ib_cache.h +++ b/drivers/infiniband/include/ib_cache.h @@ -1,5 +1,7 @@ /* * Copyright (c) 2004 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Intel Corporation. All rights reserved. + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/include/ib_verbs.h b/drivers/infiniband/include/ib_verbs.h index 5d24edaa66e6..8d5ea9568337 100644 --- a/drivers/infiniband/include/ib_verbs.h +++ b/drivers/infiniband/include/ib_verbs.h @@ -4,6 +4,7 @@ * Copyright (c) 2004 Intel Corporation. All rights reserved. * Copyright (c) 2004 Topspin Corporation. All rights reserved. * Copyright (c) 2004 Voltaire Corporation. All rights reserved. + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. * Copyright (c) 2005 Cisco Systems. All rights reserved. * * This software is available to you under a choice of one of two diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 04c98f54e9c4..b91d3ef01b92 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -1,5 +1,7 @@ /* * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. + * Copyright (c) 2004 Voltaire, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index eee82363167d..cb4f8062677c 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -1,5 +1,8 @@ /* * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. + * Copyright (c) 2004, 2005 Voltaire, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index fa00816a3cf7..b07383e5c76a 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1,5 +1,7 @@ /* * Copyright (c) 2004 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. + * Copyright (c) 2004 Voltaire, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 70208c3d21e2..e03b070d5222 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -1,5 +1,7 @@ /* * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. + * Copyright (c) 2004 Voltaire, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c index 4933edf062c2..21b58aa76fee 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU -- cgit v1.2.1 From 92a6b34bf4d0d11c54b2a6bdd6240f98cb326200 Mon Sep 17 00:00:00 2001 From: Hal Rosenstock Date: Sat, 13 Aug 2005 20:50:27 -0700 Subject: [PATCH] IB: Eliminate redundant NULL checks IPoIB: Eliminate NULL checks prior to calling kfree Signed-off-by: Hal Rosenstock Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index b07383e5c76a..d4300e4a36d8 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -782,15 +782,11 @@ void ipoib_dev_cleanup(struct net_device *dev) ipoib_ib_dev_cleanup(dev); - if (priv->rx_ring) { - kfree(priv->rx_ring); - priv->rx_ring = NULL; - } + kfree(priv->rx_ring); + kfree(priv->tx_ring); - if (priv->tx_ring) { - kfree(priv->tx_ring); - priv->tx_ring = NULL; - } + priv->rx_ring = NULL; + priv->tx_ring = NULL; } static void ipoib_setup(struct net_device *dev) -- cgit v1.2.1 From 97f52eb438be7caebe026421545619d8a0c1398a Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Sat, 13 Aug 2005 21:05:57 -0700 Subject: [PATCH] IB: sparse endianness cleanup Fix sparse warnings. Use __be* where appropriate. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/cm.c | 121 ++++++++-------- drivers/infiniband/core/cm_msgs.h | 192 ++++++++++++------------- drivers/infiniband/core/mad.c | 10 +- drivers/infiniband/core/mad_priv.h | 6 +- drivers/infiniband/core/mad_rmpp.c | 2 +- drivers/infiniband/core/sysfs.c | 36 ++--- drivers/infiniband/core/ud_header.c | 8 +- drivers/infiniband/core/user_mad.c | 4 +- drivers/infiniband/hw/mthca/mthca_av.c | 24 ++-- drivers/infiniband/hw/mthca/mthca_cmd.c | 40 +++--- drivers/infiniband/hw/mthca/mthca_cq.c | 89 ++++++------ drivers/infiniband/hw/mthca/mthca_dev.h | 15 +- drivers/infiniband/hw/mthca/mthca_doorbell.h | 12 +- drivers/infiniband/hw/mthca/mthca_eq.c | 62 ++++---- drivers/infiniband/hw/mthca/mthca_mad.c | 2 +- drivers/infiniband/hw/mthca/mthca_mcg.c | 36 ++--- drivers/infiniband/hw/mthca/mthca_memfree.c | 4 +- drivers/infiniband/hw/mthca/mthca_memfree.h | 4 +- drivers/infiniband/hw/mthca/mthca_mr.c | 32 ++--- drivers/infiniband/hw/mthca/mthca_provider.c | 16 +-- drivers/infiniband/hw/mthca/mthca_provider.h | 6 +- drivers/infiniband/hw/mthca/mthca_qp.c | 187 ++++++++++++------------ drivers/infiniband/include/ib_cm.h | 89 ++++++------ drivers/infiniband/include/ib_mad.h | 22 +-- drivers/infiniband/include/ib_sa.h | 18 +-- drivers/infiniband/include/ib_smi.h | 18 ++- drivers/infiniband/include/ib_user_cm.h | 28 ++-- drivers/infiniband/include/ib_user_mad.h | 10 +- drivers/infiniband/include/ib_user_verbs.h | 4 +- drivers/infiniband/include/ib_verbs.h | 14 +- drivers/infiniband/ulp/ipoib/ipoib.h | 4 +- drivers/infiniband/ulp/ipoib/ipoib_fs.c | 2 +- drivers/infiniband/ulp/ipoib/ipoib_main.c | 4 +- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 6 +- 34 files changed, 565 insertions(+), 562 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 403ed125d8f4..781be773a186 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -83,7 +83,7 @@ struct cm_port { struct cm_device { struct list_head list; struct ib_device *device; - u64 ca_guid; + __be64 ca_guid; struct cm_port port[0]; }; @@ -100,8 +100,8 @@ struct cm_work { struct list_head list; struct cm_port *port; struct ib_mad_recv_wc *mad_recv_wc; /* Received MADs */ - u32 local_id; /* Established / timewait */ - u32 remote_id; + __be32 local_id; /* Established / timewait */ + __be32 remote_id; struct ib_cm_event cm_event; struct ib_sa_path_rec path[0]; }; @@ -110,8 +110,8 @@ struct cm_timewait_info { struct cm_work work; /* Must be first. */ struct rb_node remote_qp_node; struct rb_node remote_id_node; - u64 remote_ca_guid; - u32 remote_qpn; + __be64 remote_ca_guid; + __be32 remote_qpn; u8 inserted_remote_qp; u8 inserted_remote_id; }; @@ -132,11 +132,11 @@ struct cm_id_private { struct cm_av alt_av; void *private_data; - u64 tid; - u32 local_qpn; - u32 remote_qpn; - u32 sq_psn; - u32 rq_psn; + __be64 tid; + __be32 local_qpn; + __be32 remote_qpn; + __be32 sq_psn; + __be32 rq_psn; int timeout_ms; enum ib_mtu path_mtu; u8 private_data_len; @@ -253,7 +253,7 @@ static void cm_set_ah_attr(struct ib_ah_attr *ah_attr, u8 port_num, u16 dlid, u8 sl, u16 src_path_bits) { memset(ah_attr, 0, sizeof ah_attr); - ah_attr->dlid = be16_to_cpu(dlid); + ah_attr->dlid = dlid; ah_attr->sl = sl; ah_attr->src_path_bits = src_path_bits; ah_attr->port_num = port_num; @@ -264,7 +264,7 @@ static void cm_init_av_for_response(struct cm_port *port, { av->port = port; av->pkey_index = wc->pkey_index; - cm_set_ah_attr(&av->ah_attr, port->port_num, cpu_to_be16(wc->slid), + cm_set_ah_attr(&av->ah_attr, port->port_num, wc->slid, wc->sl, wc->dlid_path_bits); } @@ -295,8 +295,9 @@ static int cm_init_av_by_path(struct ib_sa_path_rec *path, struct cm_av *av) return ret; av->port = port; - cm_set_ah_attr(&av->ah_attr, av->port->port_num, path->dlid, - path->sl, path->slid & 0x7F); + cm_set_ah_attr(&av->ah_attr, av->port->port_num, + be16_to_cpu(path->dlid), path->sl, + be16_to_cpu(path->slid) & 0x7F); av->packet_life_time = path->packet_life_time; return 0; } @@ -309,26 +310,26 @@ static int cm_alloc_id(struct cm_id_private *cm_id_priv) do { spin_lock_irqsave(&cm.lock, flags); ret = idr_get_new_above(&cm.local_id_table, cm_id_priv, 1, - (int *) &cm_id_priv->id.local_id); + (__force int *) &cm_id_priv->id.local_id); spin_unlock_irqrestore(&cm.lock, flags); } while( (ret == -EAGAIN) && idr_pre_get(&cm.local_id_table, GFP_KERNEL) ); return ret; } -static void cm_free_id(u32 local_id) +static void cm_free_id(__be32 local_id) { unsigned long flags; spin_lock_irqsave(&cm.lock, flags); - idr_remove(&cm.local_id_table, (int) local_id); + idr_remove(&cm.local_id_table, (__force int) local_id); spin_unlock_irqrestore(&cm.lock, flags); } -static struct cm_id_private * cm_get_id(u32 local_id, u32 remote_id) +static struct cm_id_private * cm_get_id(__be32 local_id, __be32 remote_id) { struct cm_id_private *cm_id_priv; - cm_id_priv = idr_find(&cm.local_id_table, (int) local_id); + cm_id_priv = idr_find(&cm.local_id_table, (__force int) local_id); if (cm_id_priv) { if (cm_id_priv->id.remote_id == remote_id) atomic_inc(&cm_id_priv->refcount); @@ -339,7 +340,7 @@ static struct cm_id_private * cm_get_id(u32 local_id, u32 remote_id) return cm_id_priv; } -static struct cm_id_private * cm_acquire_id(u32 local_id, u32 remote_id) +static struct cm_id_private * cm_acquire_id(__be32 local_id, __be32 remote_id) { struct cm_id_private *cm_id_priv; unsigned long flags; @@ -356,8 +357,8 @@ static struct cm_id_private * cm_insert_listen(struct cm_id_private *cm_id_priv) struct rb_node **link = &cm.listen_service_table.rb_node; struct rb_node *parent = NULL; struct cm_id_private *cur_cm_id_priv; - u64 service_id = cm_id_priv->id.service_id; - u64 service_mask = cm_id_priv->id.service_mask; + __be64 service_id = cm_id_priv->id.service_id; + __be64 service_mask = cm_id_priv->id.service_mask; while (*link) { parent = *link; @@ -376,7 +377,7 @@ static struct cm_id_private * cm_insert_listen(struct cm_id_private *cm_id_priv) return NULL; } -static struct cm_id_private * cm_find_listen(u64 service_id) +static struct cm_id_private * cm_find_listen(__be64 service_id) { struct rb_node *node = cm.listen_service_table.rb_node; struct cm_id_private *cm_id_priv; @@ -400,8 +401,8 @@ static struct cm_timewait_info * cm_insert_remote_id(struct cm_timewait_info struct rb_node **link = &cm.remote_id_table.rb_node; struct rb_node *parent = NULL; struct cm_timewait_info *cur_timewait_info; - u64 remote_ca_guid = timewait_info->remote_ca_guid; - u32 remote_id = timewait_info->work.remote_id; + __be64 remote_ca_guid = timewait_info->remote_ca_guid; + __be32 remote_id = timewait_info->work.remote_id; while (*link) { parent = *link; @@ -424,8 +425,8 @@ static struct cm_timewait_info * cm_insert_remote_id(struct cm_timewait_info return NULL; } -static struct cm_timewait_info * cm_find_remote_id(u64 remote_ca_guid, - u32 remote_id) +static struct cm_timewait_info * cm_find_remote_id(__be64 remote_ca_guid, + __be32 remote_id) { struct rb_node *node = cm.remote_id_table.rb_node; struct cm_timewait_info *timewait_info; @@ -453,8 +454,8 @@ static struct cm_timewait_info * cm_insert_remote_qpn(struct cm_timewait_info struct rb_node **link = &cm.remote_qp_table.rb_node; struct rb_node *parent = NULL; struct cm_timewait_info *cur_timewait_info; - u64 remote_ca_guid = timewait_info->remote_ca_guid; - u32 remote_qpn = timewait_info->remote_qpn; + __be64 remote_ca_guid = timewait_info->remote_ca_guid; + __be32 remote_qpn = timewait_info->remote_qpn; while (*link) { parent = *link; @@ -484,7 +485,7 @@ static struct cm_id_private * cm_insert_remote_sidr(struct cm_id_private struct rb_node *parent = NULL; struct cm_id_private *cur_cm_id_priv; union ib_gid *port_gid = &cm_id_priv->av.dgid; - u32 remote_id = cm_id_priv->id.remote_id; + __be32 remote_id = cm_id_priv->id.remote_id; while (*link) { parent = *link; @@ -598,7 +599,7 @@ static void cm_cleanup_timewait(struct cm_timewait_info *timewait_info) spin_unlock_irqrestore(&cm.lock, flags); } -static struct cm_timewait_info * cm_create_timewait_info(u32 local_id) +static struct cm_timewait_info * cm_create_timewait_info(__be32 local_id) { struct cm_timewait_info *timewait_info; @@ -715,14 +716,15 @@ retest: EXPORT_SYMBOL(ib_destroy_cm_id); int ib_cm_listen(struct ib_cm_id *cm_id, - u64 service_id, - u64 service_mask) + __be64 service_id, + __be64 service_mask) { struct cm_id_private *cm_id_priv, *cur_cm_id_priv; unsigned long flags; int ret = 0; - service_mask = service_mask ? service_mask : ~0ULL; + service_mask = service_mask ? service_mask : + __constant_cpu_to_be64(~0ULL); service_id &= service_mask; if ((service_id & IB_SERVICE_ID_AGN_MASK) == IB_CM_ASSIGN_SERVICE_ID && (service_id != IB_CM_ASSIGN_SERVICE_ID)) @@ -735,8 +737,8 @@ int ib_cm_listen(struct ib_cm_id *cm_id, spin_lock_irqsave(&cm.lock, flags); if (service_id == IB_CM_ASSIGN_SERVICE_ID) { - cm_id->service_id = __cpu_to_be64(cm.listen_service_id++); - cm_id->service_mask = ~0ULL; + cm_id->service_id = cpu_to_be64(cm.listen_service_id++); + cm_id->service_mask = __constant_cpu_to_be64(~0ULL); } else { cm_id->service_id = service_id; cm_id->service_mask = service_mask; @@ -752,18 +754,19 @@ int ib_cm_listen(struct ib_cm_id *cm_id, } EXPORT_SYMBOL(ib_cm_listen); -static u64 cm_form_tid(struct cm_id_private *cm_id_priv, - enum cm_msg_sequence msg_seq) +static __be64 cm_form_tid(struct cm_id_private *cm_id_priv, + enum cm_msg_sequence msg_seq) { u64 hi_tid, low_tid; hi_tid = ((u64) cm_id_priv->av.port->mad_agent->hi_tid) << 32; - low_tid = (u64) (cm_id_priv->id.local_id | (msg_seq << 30)); + low_tid = (u64) ((__force u32)cm_id_priv->id.local_id | + (msg_seq << 30)); return cpu_to_be64(hi_tid | low_tid); } static void cm_format_mad_hdr(struct ib_mad_hdr *hdr, - enum cm_msg_attr_id attr_id, u64 tid) + __be16 attr_id, __be64 tid) { hdr->base_version = IB_MGMT_BASE_VERSION; hdr->mgmt_class = IB_MGMT_CLASS_CM; @@ -896,7 +899,7 @@ int ib_send_cm_req(struct ib_cm_id *cm_id, goto error1; } cm_id->service_id = param->service_id; - cm_id->service_mask = ~0ULL; + cm_id->service_mask = __constant_cpu_to_be64(~0ULL); cm_id_priv->timeout_ms = cm_convert_to_ms( param->primary_path->packet_life_time) * 2 + cm_convert_to_ms( @@ -963,7 +966,7 @@ static int cm_issue_rej(struct cm_port *port, rej_msg->remote_comm_id = rcv_msg->local_comm_id; rej_msg->local_comm_id = rcv_msg->remote_comm_id; cm_rej_set_msg_rejected(rej_msg, msg_rejected); - rej_msg->reason = reason; + rej_msg->reason = cpu_to_be16(reason); if (ari && ari_length) { cm_rej_set_reject_info_len(rej_msg, ari_length); @@ -977,8 +980,8 @@ static int cm_issue_rej(struct cm_port *port, return ret; } -static inline int cm_is_active_peer(u64 local_ca_guid, u64 remote_ca_guid, - u32 local_qpn, u32 remote_qpn) +static inline int cm_is_active_peer(__be64 local_ca_guid, __be64 remote_ca_guid, + __be32 local_qpn, __be32 remote_qpn) { return (be64_to_cpu(local_ca_guid) > be64_to_cpu(remote_ca_guid) || ((local_ca_guid == remote_ca_guid) && @@ -1137,7 +1140,7 @@ static void cm_format_rej(struct cm_rej_msg *rej_msg, break; } - rej_msg->reason = reason; + rej_msg->reason = cpu_to_be16(reason); if (ari && ari_length) { cm_rej_set_reject_info_len(rej_msg, ari_length); memcpy(rej_msg->ari, ari, ari_length); @@ -1276,7 +1279,7 @@ static int cm_req_handler(struct cm_work *work) cm_id_priv->id.cm_handler = listen_cm_id_priv->id.cm_handler; cm_id_priv->id.context = listen_cm_id_priv->id.context; cm_id_priv->id.service_id = req_msg->service_id; - cm_id_priv->id.service_mask = ~0ULL; + cm_id_priv->id.service_mask = __constant_cpu_to_be64(~0ULL); cm_format_paths_from_req(req_msg, &work->path[0], &work->path[1]); ret = cm_init_av_by_path(&work->path[0], &cm_id_priv->av); @@ -1969,7 +1972,7 @@ static void cm_format_rej_event(struct cm_work *work) param = &work->cm_event.param.rej_rcvd; param->ari = rej_msg->ari; param->ari_length = cm_rej_get_reject_info_len(rej_msg); - param->reason = rej_msg->reason; + param->reason = __be16_to_cpu(rej_msg->reason); work->cm_event.private_data = &rej_msg->private_data; } @@ -1978,20 +1981,20 @@ static struct cm_id_private * cm_acquire_rejected_id(struct cm_rej_msg *rej_msg) struct cm_timewait_info *timewait_info; struct cm_id_private *cm_id_priv; unsigned long flags; - u32 remote_id; + __be32 remote_id; remote_id = rej_msg->local_comm_id; - if (rej_msg->reason == IB_CM_REJ_TIMEOUT) { + if (__be16_to_cpu(rej_msg->reason) == IB_CM_REJ_TIMEOUT) { spin_lock_irqsave(&cm.lock, flags); - timewait_info = cm_find_remote_id( *((u64 *) rej_msg->ari), + timewait_info = cm_find_remote_id( *((__be64 *) rej_msg->ari), remote_id); if (!timewait_info) { spin_unlock_irqrestore(&cm.lock, flags); return NULL; } cm_id_priv = idr_find(&cm.local_id_table, - (int) timewait_info->work.local_id); + (__force int) timewait_info->work.local_id); if (cm_id_priv) { if (cm_id_priv->id.remote_id == remote_id) atomic_inc(&cm_id_priv->refcount); @@ -2032,7 +2035,7 @@ static int cm_rej_handler(struct cm_work *work) /* fall through */ case IB_CM_REQ_RCVD: case IB_CM_MRA_REQ_SENT: - if (rej_msg->reason == IB_CM_REJ_STALE_CONN) + if (__be16_to_cpu(rej_msg->reason) == IB_CM_REJ_STALE_CONN) cm_enter_timewait(cm_id_priv); else cm_reset_to_idle(cm_id_priv); @@ -2553,7 +2556,7 @@ static void cm_format_sidr_req(struct cm_sidr_req_msg *sidr_req_msg, cm_format_mad_hdr(&sidr_req_msg->hdr, CM_SIDR_REQ_ATTR_ID, cm_form_tid(cm_id_priv, CM_MSG_SEQUENCE_SIDR)); sidr_req_msg->request_id = cm_id_priv->id.local_id; - sidr_req_msg->pkey = param->pkey; + sidr_req_msg->pkey = cpu_to_be16(param->pkey); sidr_req_msg->service_id = param->service_id; if (param->private_data && param->private_data_len) @@ -2580,7 +2583,7 @@ int ib_send_cm_sidr_req(struct ib_cm_id *cm_id, goto out; cm_id->service_id = param->service_id; - cm_id->service_mask = ~0ULL; + cm_id->service_mask = __constant_cpu_to_be64(~0ULL); cm_id_priv->timeout_ms = param->timeout_ms; cm_id_priv->max_cm_retries = param->max_cm_retries; ret = cm_alloc_msg(cm_id_priv, &msg); @@ -2621,7 +2624,7 @@ static void cm_format_sidr_req_event(struct cm_work *work, sidr_req_msg = (struct cm_sidr_req_msg *) work->mad_recv_wc->recv_buf.mad; param = &work->cm_event.param.sidr_req_rcvd; - param->pkey = sidr_req_msg->pkey; + param->pkey = __be16_to_cpu(sidr_req_msg->pkey); param->listen_id = listen_id; param->device = work->port->mad_agent->device; param->port = work->port->port_num; @@ -2645,7 +2648,7 @@ static int cm_sidr_req_handler(struct cm_work *work) sidr_req_msg = (struct cm_sidr_req_msg *) work->mad_recv_wc->recv_buf.mad; wc = work->mad_recv_wc->wc; - cm_id_priv->av.dgid.global.subnet_prefix = wc->slid; + cm_id_priv->av.dgid.global.subnet_prefix = cpu_to_be64(wc->slid); cm_id_priv->av.dgid.global.interface_id = 0; cm_init_av_for_response(work->port, work->mad_recv_wc->wc, &cm_id_priv->av); @@ -2673,7 +2676,7 @@ static int cm_sidr_req_handler(struct cm_work *work) cm_id_priv->id.cm_handler = cur_cm_id_priv->id.cm_handler; cm_id_priv->id.context = cur_cm_id_priv->id.context; cm_id_priv->id.service_id = sidr_req_msg->service_id; - cm_id_priv->id.service_mask = ~0ULL; + cm_id_priv->id.service_mask = __constant_cpu_to_be64(~0ULL); cm_format_sidr_req_event(work, &cur_cm_id_priv->id); cm_process_work(cm_id_priv, work); @@ -3175,10 +3178,10 @@ int ib_cm_init_qp_attr(struct ib_cm_id *cm_id, } EXPORT_SYMBOL(ib_cm_init_qp_attr); -static u64 cm_get_ca_guid(struct ib_device *device) +static __be64 cm_get_ca_guid(struct ib_device *device) { struct ib_device_attr *device_attr; - u64 guid; + __be64 guid; int ret; device_attr = kmalloc(sizeof *device_attr, GFP_KERNEL); diff --git a/drivers/infiniband/core/cm_msgs.h b/drivers/infiniband/core/cm_msgs.h index 15a309a77b2b..807a9fbb38f5 100644 --- a/drivers/infiniband/core/cm_msgs.h +++ b/drivers/infiniband/core/cm_msgs.h @@ -43,19 +43,17 @@ #define IB_CM_CLASS_VERSION 2 /* IB specification 1.2 */ -enum cm_msg_attr_id { - CM_REQ_ATTR_ID = __constant_htons(0x0010), - CM_MRA_ATTR_ID = __constant_htons(0x0011), - CM_REJ_ATTR_ID = __constant_htons(0x0012), - CM_REP_ATTR_ID = __constant_htons(0x0013), - CM_RTU_ATTR_ID = __constant_htons(0x0014), - CM_DREQ_ATTR_ID = __constant_htons(0x0015), - CM_DREP_ATTR_ID = __constant_htons(0x0016), - CM_SIDR_REQ_ATTR_ID = __constant_htons(0x0017), - CM_SIDR_REP_ATTR_ID = __constant_htons(0x0018), - CM_LAP_ATTR_ID = __constant_htons(0x0019), - CM_APR_ATTR_ID = __constant_htons(0x001A) -}; +#define CM_REQ_ATTR_ID __constant_htons(0x0010) +#define CM_MRA_ATTR_ID __constant_htons(0x0011) +#define CM_REJ_ATTR_ID __constant_htons(0x0012) +#define CM_REP_ATTR_ID __constant_htons(0x0013) +#define CM_RTU_ATTR_ID __constant_htons(0x0014) +#define CM_DREQ_ATTR_ID __constant_htons(0x0015) +#define CM_DREP_ATTR_ID __constant_htons(0x0016) +#define CM_SIDR_REQ_ATTR_ID __constant_htons(0x0017) +#define CM_SIDR_REP_ATTR_ID __constant_htons(0x0018) +#define CM_LAP_ATTR_ID __constant_htons(0x0019) +#define CM_APR_ATTR_ID __constant_htons(0x001A) enum cm_msg_sequence { CM_MSG_SEQUENCE_REQ, @@ -67,35 +65,35 @@ enum cm_msg_sequence { struct cm_req_msg { struct ib_mad_hdr hdr; - u32 local_comm_id; - u32 rsvd4; - u64 service_id; - u64 local_ca_guid; - u32 rsvd24; - u32 local_qkey; + __be32 local_comm_id; + __be32 rsvd4; + __be64 service_id; + __be64 local_ca_guid; + __be32 rsvd24; + __be32 local_qkey; /* local QPN:24, responder resources:8 */ - u32 offset32; + __be32 offset32; /* local EECN:24, initiator depth:8 */ - u32 offset36; + __be32 offset36; /* * remote EECN:24, remote CM response timeout:5, * transport service type:2, end-to-end flow control:1 */ - u32 offset40; + __be32 offset40; /* starting PSN:24, local CM response timeout:5, retry count:3 */ - u32 offset44; - u16 pkey; + __be32 offset44; + __be16 pkey; /* path MTU:4, RDC exists:1, RNR retry count:3. */ u8 offset50; /* max CM Retries:4, SRQ:1, rsvd:3 */ u8 offset51; - u16 primary_local_lid; - u16 primary_remote_lid; + __be16 primary_local_lid; + __be16 primary_remote_lid; union ib_gid primary_local_gid; union ib_gid primary_remote_gid; /* flow label:20, rsvd:6, packet rate:6 */ - u32 primary_offset88; + __be32 primary_offset88; u8 primary_traffic_class; u8 primary_hop_limit; /* SL:4, subnet local:1, rsvd:3 */ @@ -103,12 +101,12 @@ struct cm_req_msg { /* local ACK timeout:5, rsvd:3 */ u8 primary_offset95; - u16 alt_local_lid; - u16 alt_remote_lid; + __be16 alt_local_lid; + __be16 alt_remote_lid; union ib_gid alt_local_gid; union ib_gid alt_remote_gid; /* flow label:20, rsvd:6, packet rate:6 */ - u32 alt_offset132; + __be32 alt_offset132; u8 alt_traffic_class; u8 alt_hop_limit; /* SL:4, subnet local:1, rsvd:3 */ @@ -120,12 +118,12 @@ struct cm_req_msg { } __attribute__ ((packed)); -static inline u32 cm_req_get_local_qpn(struct cm_req_msg *req_msg) +static inline __be32 cm_req_get_local_qpn(struct cm_req_msg *req_msg) { return cpu_to_be32(be32_to_cpu(req_msg->offset32) >> 8); } -static inline void cm_req_set_local_qpn(struct cm_req_msg *req_msg, u32 qpn) +static inline void cm_req_set_local_qpn(struct cm_req_msg *req_msg, __be32 qpn) { req_msg->offset32 = cpu_to_be32((be32_to_cpu(qpn) << 8) | (be32_to_cpu(req_msg->offset32) & @@ -208,13 +206,13 @@ static inline void cm_req_set_flow_ctrl(struct cm_req_msg *req_msg, 0xFFFFFFFE)); } -static inline u32 cm_req_get_starting_psn(struct cm_req_msg *req_msg) +static inline __be32 cm_req_get_starting_psn(struct cm_req_msg *req_msg) { return cpu_to_be32(be32_to_cpu(req_msg->offset44) >> 8); } static inline void cm_req_set_starting_psn(struct cm_req_msg *req_msg, - u32 starting_psn) + __be32 starting_psn) { req_msg->offset44 = cpu_to_be32((be32_to_cpu(starting_psn) << 8) | (be32_to_cpu(req_msg->offset44) & 0x000000FF)); @@ -288,13 +286,13 @@ static inline void cm_req_set_srq(struct cm_req_msg *req_msg, u8 srq) ((srq & 0x1) << 3)); } -static inline u32 cm_req_get_primary_flow_label(struct cm_req_msg *req_msg) +static inline __be32 cm_req_get_primary_flow_label(struct cm_req_msg *req_msg) { - return cpu_to_be32((be32_to_cpu(req_msg->primary_offset88) >> 12)); + return cpu_to_be32(be32_to_cpu(req_msg->primary_offset88) >> 12); } static inline void cm_req_set_primary_flow_label(struct cm_req_msg *req_msg, - u32 flow_label) + __be32 flow_label) { req_msg->primary_offset88 = cpu_to_be32( (be32_to_cpu(req_msg->primary_offset88) & @@ -350,13 +348,13 @@ static inline void cm_req_set_primary_local_ack_timeout(struct cm_req_msg *req_m (local_ack_timeout << 3)); } -static inline u32 cm_req_get_alt_flow_label(struct cm_req_msg *req_msg) +static inline __be32 cm_req_get_alt_flow_label(struct cm_req_msg *req_msg) { - return cpu_to_be32((be32_to_cpu(req_msg->alt_offset132) >> 12)); + return cpu_to_be32(be32_to_cpu(req_msg->alt_offset132) >> 12); } static inline void cm_req_set_alt_flow_label(struct cm_req_msg *req_msg, - u32 flow_label) + __be32 flow_label) { req_msg->alt_offset132 = cpu_to_be32( (be32_to_cpu(req_msg->alt_offset132) & @@ -422,8 +420,8 @@ enum cm_msg_response { struct cm_mra_msg { struct ib_mad_hdr hdr; - u32 local_comm_id; - u32 remote_comm_id; + __be32 local_comm_id; + __be32 remote_comm_id; /* message MRAed:2, rsvd:6 */ u8 offset8; /* service timeout:5, rsvd:3 */ @@ -458,13 +456,13 @@ static inline void cm_mra_set_service_timeout(struct cm_mra_msg *mra_msg, struct cm_rej_msg { struct ib_mad_hdr hdr; - u32 local_comm_id; - u32 remote_comm_id; + __be32 local_comm_id; + __be32 remote_comm_id; /* message REJected:2, rsvd:6 */ u8 offset8; /* reject info length:7, rsvd:1. */ u8 offset9; - u16 reason; + __be16 reason; u8 ari[IB_CM_REJ_ARI_LENGTH]; u8 private_data[IB_CM_REJ_PRIVATE_DATA_SIZE]; @@ -495,45 +493,45 @@ static inline void cm_rej_set_reject_info_len(struct cm_rej_msg *rej_msg, struct cm_rep_msg { struct ib_mad_hdr hdr; - u32 local_comm_id; - u32 remote_comm_id; - u32 local_qkey; + __be32 local_comm_id; + __be32 remote_comm_id; + __be32 local_qkey; /* local QPN:24, rsvd:8 */ - u32 offset12; + __be32 offset12; /* local EECN:24, rsvd:8 */ - u32 offset16; + __be32 offset16; /* starting PSN:24 rsvd:8 */ - u32 offset20; + __be32 offset20; u8 resp_resources; u8 initiator_depth; /* target ACK delay:5, failover accepted:2, end-to-end flow control:1 */ u8 offset26; /* RNR retry count:3, SRQ:1, rsvd:5 */ u8 offset27; - u64 local_ca_guid; + __be64 local_ca_guid; u8 private_data[IB_CM_REP_PRIVATE_DATA_SIZE]; } __attribute__ ((packed)); -static inline u32 cm_rep_get_local_qpn(struct cm_rep_msg *rep_msg) +static inline __be32 cm_rep_get_local_qpn(struct cm_rep_msg *rep_msg) { return cpu_to_be32(be32_to_cpu(rep_msg->offset12) >> 8); } -static inline void cm_rep_set_local_qpn(struct cm_rep_msg *rep_msg, u32 qpn) +static inline void cm_rep_set_local_qpn(struct cm_rep_msg *rep_msg, __be32 qpn) { rep_msg->offset12 = cpu_to_be32((be32_to_cpu(qpn) << 8) | (be32_to_cpu(rep_msg->offset12) & 0x000000FF)); } -static inline u32 cm_rep_get_starting_psn(struct cm_rep_msg *rep_msg) +static inline __be32 cm_rep_get_starting_psn(struct cm_rep_msg *rep_msg) { return cpu_to_be32(be32_to_cpu(rep_msg->offset20) >> 8); } static inline void cm_rep_set_starting_psn(struct cm_rep_msg *rep_msg, - u32 starting_psn) + __be32 starting_psn) { rep_msg->offset20 = cpu_to_be32((be32_to_cpu(starting_psn) << 8) | (be32_to_cpu(rep_msg->offset20) & 0x000000FF)); @@ -600,8 +598,8 @@ static inline void cm_rep_set_srq(struct cm_rep_msg *rep_msg, u8 srq) struct cm_rtu_msg { struct ib_mad_hdr hdr; - u32 local_comm_id; - u32 remote_comm_id; + __be32 local_comm_id; + __be32 remote_comm_id; u8 private_data[IB_CM_RTU_PRIVATE_DATA_SIZE]; @@ -610,21 +608,21 @@ struct cm_rtu_msg { struct cm_dreq_msg { struct ib_mad_hdr hdr; - u32 local_comm_id; - u32 remote_comm_id; + __be32 local_comm_id; + __be32 remote_comm_id; /* remote QPN/EECN:24, rsvd:8 */ - u32 offset8; + __be32 offset8; u8 private_data[IB_CM_DREQ_PRIVATE_DATA_SIZE]; } __attribute__ ((packed)); -static inline u32 cm_dreq_get_remote_qpn(struct cm_dreq_msg *dreq_msg) +static inline __be32 cm_dreq_get_remote_qpn(struct cm_dreq_msg *dreq_msg) { return cpu_to_be32(be32_to_cpu(dreq_msg->offset8) >> 8); } -static inline void cm_dreq_set_remote_qpn(struct cm_dreq_msg *dreq_msg, u32 qpn) +static inline void cm_dreq_set_remote_qpn(struct cm_dreq_msg *dreq_msg, __be32 qpn) { dreq_msg->offset8 = cpu_to_be32((be32_to_cpu(qpn) << 8) | (be32_to_cpu(dreq_msg->offset8) & 0x000000FF)); @@ -633,8 +631,8 @@ static inline void cm_dreq_set_remote_qpn(struct cm_dreq_msg *dreq_msg, u32 qpn) struct cm_drep_msg { struct ib_mad_hdr hdr; - u32 local_comm_id; - u32 remote_comm_id; + __be32 local_comm_id; + __be32 remote_comm_id; u8 private_data[IB_CM_DREP_PRIVATE_DATA_SIZE]; @@ -643,37 +641,37 @@ struct cm_drep_msg { struct cm_lap_msg { struct ib_mad_hdr hdr; - u32 local_comm_id; - u32 remote_comm_id; + __be32 local_comm_id; + __be32 remote_comm_id; - u32 rsvd8; + __be32 rsvd8; /* remote QPN/EECN:24, remote CM response timeout:5, rsvd:3 */ - u32 offset12; - u32 rsvd16; + __be32 offset12; + __be32 rsvd16; - u16 alt_local_lid; - u16 alt_remote_lid; + __be16 alt_local_lid; + __be16 alt_remote_lid; union ib_gid alt_local_gid; union ib_gid alt_remote_gid; /* flow label:20, rsvd:4, traffic class:8 */ - u32 offset56; + __be32 offset56; u8 alt_hop_limit; /* rsvd:2, packet rate:6 */ - uint8_t offset61; + u8 offset61; /* SL:4, subnet local:1, rsvd:3 */ - uint8_t offset62; + u8 offset62; /* local ACK timeout:5, rsvd:3 */ - uint8_t offset63; + u8 offset63; u8 private_data[IB_CM_LAP_PRIVATE_DATA_SIZE]; } __attribute__ ((packed)); -static inline u32 cm_lap_get_remote_qpn(struct cm_lap_msg *lap_msg) +static inline __be32 cm_lap_get_remote_qpn(struct cm_lap_msg *lap_msg) { return cpu_to_be32(be32_to_cpu(lap_msg->offset12) >> 8); } -static inline void cm_lap_set_remote_qpn(struct cm_lap_msg *lap_msg, u32 qpn) +static inline void cm_lap_set_remote_qpn(struct cm_lap_msg *lap_msg, __be32 qpn) { lap_msg->offset12 = cpu_to_be32((be32_to_cpu(qpn) << 8) | (be32_to_cpu(lap_msg->offset12) & @@ -693,17 +691,17 @@ static inline void cm_lap_set_remote_resp_timeout(struct cm_lap_msg *lap_msg, 0xFFFFFF07)); } -static inline u32 cm_lap_get_flow_label(struct cm_lap_msg *lap_msg) +static inline __be32 cm_lap_get_flow_label(struct cm_lap_msg *lap_msg) { - return be32_to_cpu(lap_msg->offset56) >> 12; + return cpu_to_be32(be32_to_cpu(lap_msg->offset56) >> 12); } static inline void cm_lap_set_flow_label(struct cm_lap_msg *lap_msg, - u32 flow_label) + __be32 flow_label) { - lap_msg->offset56 = cpu_to_be32((flow_label << 12) | - (be32_to_cpu(lap_msg->offset56) & - 0x00000FFF)); + lap_msg->offset56 = cpu_to_be32( + (be32_to_cpu(lap_msg->offset56) & 0x00000FFF) | + (be32_to_cpu(flow_label) << 12)); } static inline u8 cm_lap_get_traffic_class(struct cm_lap_msg *lap_msg) @@ -766,8 +764,8 @@ static inline void cm_lap_set_local_ack_timeout(struct cm_lap_msg *lap_msg, struct cm_apr_msg { struct ib_mad_hdr hdr; - u32 local_comm_id; - u32 remote_comm_id; + __be32 local_comm_id; + __be32 remote_comm_id; u8 info_length; u8 ap_status; @@ -779,10 +777,10 @@ struct cm_apr_msg { struct cm_sidr_req_msg { struct ib_mad_hdr hdr; - u32 request_id; - u16 pkey; - u16 rsvd; - u64 service_id; + __be32 request_id; + __be16 pkey; + __be16 rsvd; + __be64 service_id; u8 private_data[IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE]; } __attribute__ ((packed)); @@ -790,26 +788,26 @@ struct cm_sidr_req_msg { struct cm_sidr_rep_msg { struct ib_mad_hdr hdr; - u32 request_id; + __be32 request_id; u8 status; u8 info_length; - u16 rsvd; + __be16 rsvd; /* QPN:24, rsvd:8 */ - u32 offset8; - u64 service_id; - u32 qkey; + __be32 offset8; + __be64 service_id; + __be32 qkey; u8 info[IB_CM_SIDR_REP_INFO_LENGTH]; u8 private_data[IB_CM_SIDR_REP_PRIVATE_DATA_SIZE]; } __attribute__ ((packed)); -static inline u32 cm_sidr_rep_get_qpn(struct cm_sidr_rep_msg *sidr_rep_msg) +static inline __be32 cm_sidr_rep_get_qpn(struct cm_sidr_rep_msg *sidr_rep_msg) { return cpu_to_be32(be32_to_cpu(sidr_rep_msg->offset8) >> 8); } static inline void cm_sidr_rep_set_qpn(struct cm_sidr_rep_msg *sidr_rep_msg, - u32 qpn) + __be32 qpn) { sidr_rep_msg->offset8 = cpu_to_be32((be32_to_cpu(qpn) << 8) | (be32_to_cpu(sidr_rep_msg->offset8) & diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index b97e210ce9c8..214493cb3a0b 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -693,7 +693,8 @@ static int handle_outgoing_dr_smp(struct ib_mad_agent_private *mad_agent_priv, goto out; } - build_smp_wc(send_wr->wr_id, smp->dr_slid, send_wr->wr.ud.pkey_index, + build_smp_wc(send_wr->wr_id, be16_to_cpu(smp->dr_slid), + send_wr->wr.ud.pkey_index, send_wr->wr.ud.port_num, &mad_wc); /* No GRH for DR SMP */ @@ -1554,7 +1555,7 @@ static int is_data_mad(struct ib_mad_agent_private *mad_agent_priv, } struct ib_mad_send_wr_private* -ib_find_send_mad(struct ib_mad_agent_private *mad_agent_priv, u64 tid) +ib_find_send_mad(struct ib_mad_agent_private *mad_agent_priv, __be64 tid) { struct ib_mad_send_wr_private *mad_send_wr; @@ -1597,7 +1598,7 @@ static void ib_mad_complete_recv(struct ib_mad_agent_private *mad_agent_priv, struct ib_mad_send_wr_private *mad_send_wr; struct ib_mad_send_wc mad_send_wc; unsigned long flags; - u64 tid; + __be64 tid; INIT_LIST_HEAD(&mad_recv_wc->rmpp_list); list_add(&mad_recv_wc->recv_buf.list, &mad_recv_wc->rmpp_list); @@ -2165,7 +2166,8 @@ static void local_completions(void *data) * Defined behavior is to complete response * before request */ - build_smp_wc(local->wr_id, IB_LID_PERMISSIVE, + build_smp_wc(local->wr_id, + be16_to_cpu(IB_LID_PERMISSIVE), 0 /* pkey index */, recv_mad_agent->agent.port_num, &wc); diff --git a/drivers/infiniband/core/mad_priv.h b/drivers/infiniband/core/mad_priv.h index 568da10b05ab..807b0f366353 100644 --- a/drivers/infiniband/core/mad_priv.h +++ b/drivers/infiniband/core/mad_priv.h @@ -121,7 +121,7 @@ struct ib_mad_send_wr_private { struct ib_send_wr send_wr; struct ib_sge sg_list[IB_MAD_SEND_REQ_MAX_SG]; u64 wr_id; /* client WR ID */ - u64 tid; + __be64 tid; unsigned long timeout; int retries; int retry; @@ -144,7 +144,7 @@ struct ib_mad_local_private { struct ib_send_wr send_wr; struct ib_sge sg_list[IB_MAD_SEND_REQ_MAX_SG]; u64 wr_id; /* client WR ID */ - u64 tid; + __be64 tid; }; struct ib_mad_mgmt_method_table { @@ -210,7 +210,7 @@ extern kmem_cache_t *ib_mad_cache; int ib_send_mad(struct ib_mad_send_wr_private *mad_send_wr); struct ib_mad_send_wr_private * -ib_find_send_mad(struct ib_mad_agent_private *mad_agent_priv, u64 tid); +ib_find_send_mad(struct ib_mad_agent_private *mad_agent_priv, __be64 tid); void ib_mad_complete_send_wr(struct ib_mad_send_wr_private *mad_send_wr, struct ib_mad_send_wc *mad_send_wc); diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c index 8f1eb80e421f..d68bf7e220f9 100644 --- a/drivers/infiniband/core/mad_rmpp.c +++ b/drivers/infiniband/core/mad_rmpp.c @@ -61,7 +61,7 @@ struct mad_rmpp_recv { int seg_num; int newwin; - u64 tid; + __be64 tid; u32 src_qp; u16 slid; u8 mgmt_class; diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index b2e779996cbe..bf7334e7fac6 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -255,14 +255,14 @@ static ssize_t show_port_gid(struct ib_port *p, struct port_attribute *attr, return ret; return sprintf(buf, "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n", - be16_to_cpu(((u16 *) gid.raw)[0]), - be16_to_cpu(((u16 *) gid.raw)[1]), - be16_to_cpu(((u16 *) gid.raw)[2]), - be16_to_cpu(((u16 *) gid.raw)[3]), - be16_to_cpu(((u16 *) gid.raw)[4]), - be16_to_cpu(((u16 *) gid.raw)[5]), - be16_to_cpu(((u16 *) gid.raw)[6]), - be16_to_cpu(((u16 *) gid.raw)[7])); + be16_to_cpu(((__be16 *) gid.raw)[0]), + be16_to_cpu(((__be16 *) gid.raw)[1]), + be16_to_cpu(((__be16 *) gid.raw)[2]), + be16_to_cpu(((__be16 *) gid.raw)[3]), + be16_to_cpu(((__be16 *) gid.raw)[4]), + be16_to_cpu(((__be16 *) gid.raw)[5]), + be16_to_cpu(((__be16 *) gid.raw)[6]), + be16_to_cpu(((__be16 *) gid.raw)[7])); } static ssize_t show_port_pkey(struct ib_port *p, struct port_attribute *attr, @@ -334,11 +334,11 @@ static ssize_t show_pma_counter(struct ib_port *p, struct port_attribute *attr, break; case 16: ret = sprintf(buf, "%u\n", - be16_to_cpup((u16 *)(out_mad->data + 40 + offset / 8))); + be16_to_cpup((__be16 *)(out_mad->data + 40 + offset / 8))); break; case 32: ret = sprintf(buf, "%u\n", - be32_to_cpup((u32 *)(out_mad->data + 40 + offset / 8))); + be32_to_cpup((__be32 *)(out_mad->data + 40 + offset / 8))); break; default: ret = 0; @@ -600,10 +600,10 @@ static ssize_t show_sys_image_guid(struct class_device *cdev, char *buf) return ret; return sprintf(buf, "%04x:%04x:%04x:%04x\n", - be16_to_cpu(((u16 *) &attr.sys_image_guid)[0]), - be16_to_cpu(((u16 *) &attr.sys_image_guid)[1]), - be16_to_cpu(((u16 *) &attr.sys_image_guid)[2]), - be16_to_cpu(((u16 *) &attr.sys_image_guid)[3])); + be16_to_cpu(((__be16 *) &attr.sys_image_guid)[0]), + be16_to_cpu(((__be16 *) &attr.sys_image_guid)[1]), + be16_to_cpu(((__be16 *) &attr.sys_image_guid)[2]), + be16_to_cpu(((__be16 *) &attr.sys_image_guid)[3])); } static ssize_t show_node_guid(struct class_device *cdev, char *buf) @@ -617,10 +617,10 @@ static ssize_t show_node_guid(struct class_device *cdev, char *buf) return ret; return sprintf(buf, "%04x:%04x:%04x:%04x\n", - be16_to_cpu(((u16 *) &attr.node_guid)[0]), - be16_to_cpu(((u16 *) &attr.node_guid)[1]), - be16_to_cpu(((u16 *) &attr.node_guid)[2]), - be16_to_cpu(((u16 *) &attr.node_guid)[3])); + be16_to_cpu(((__be16 *) &attr.node_guid)[0]), + be16_to_cpu(((__be16 *) &attr.node_guid)[1]), + be16_to_cpu(((__be16 *) &attr.node_guid)[2]), + be16_to_cpu(((__be16 *) &attr.node_guid)[3])); } static CLASS_DEVICE_ATTR(node_type, S_IRUGO, show_node_type, NULL); diff --git a/drivers/infiniband/core/ud_header.c b/drivers/infiniband/core/ud_header.c index b32d43ec0a33..89cd76d7c5a5 100644 --- a/drivers/infiniband/core/ud_header.c +++ b/drivers/infiniband/core/ud_header.c @@ -195,6 +195,7 @@ void ib_ud_header_init(int payload_bytes, struct ib_ud_header *header) { int header_len; + u16 packet_length; memset(header, 0, sizeof *header); @@ -209,7 +210,7 @@ void ib_ud_header_init(int payload_bytes, header->lrh.link_version = 0; header->lrh.link_next_header = grh_present ? IB_LNH_IBA_GLOBAL : IB_LNH_IBA_LOCAL; - header->lrh.packet_length = (IB_LRH_BYTES + + packet_length = (IB_LRH_BYTES + IB_BTH_BYTES + IB_DETH_BYTES + payload_bytes + @@ -218,8 +219,7 @@ void ib_ud_header_init(int payload_bytes, header->grh_present = grh_present; if (grh_present) { - header->lrh.packet_length += IB_GRH_BYTES / 4; - + packet_length += IB_GRH_BYTES / 4; header->grh.ip_version = 6; header->grh.payload_length = cpu_to_be16((IB_BTH_BYTES + @@ -230,7 +230,7 @@ void ib_ud_header_init(int payload_bytes, header->grh.next_header = 0x1b; } - cpu_to_be16s(&header->lrh.packet_length); + header->lrh.packet_length = cpu_to_be16(packet_length); if (header->immediate_present) header->bth.opcode = IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE; diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index 8a19dd4d38f8..16d91f187758 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -271,7 +271,7 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, struct ib_send_wr *bad_wr; struct ib_rmpp_mad *rmpp_mad; u8 method; - u64 *tid; + __be64 *tid; int ret, length, hdr_len, data_len, rmpp_hdr_size; int rmpp_active = 0; @@ -316,7 +316,7 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, if (packet->mad.hdr.grh_present) { ah_attr.ah_flags = IB_AH_GRH; memcpy(ah_attr.grh.dgid.raw, packet->mad.hdr.gid, 16); - ah_attr.grh.flow_label = packet->mad.hdr.flow_label; + ah_attr.grh.flow_label = be32_to_cpu(packet->mad.hdr.flow_label); ah_attr.grh.hop_limit = packet->mad.hdr.hop_limit; ah_attr.grh.traffic_class = packet->mad.hdr.traffic_class; } diff --git a/drivers/infiniband/hw/mthca/mthca_av.c b/drivers/infiniband/hw/mthca/mthca_av.c index d58dcbe66488..e596210f11b3 100644 --- a/drivers/infiniband/hw/mthca/mthca_av.c +++ b/drivers/infiniband/hw/mthca/mthca_av.c @@ -41,16 +41,16 @@ #include "mthca_dev.h" struct mthca_av { - u32 port_pd; - u8 reserved1; - u8 g_slid; - u16 dlid; - u8 reserved2; - u8 gid_index; - u8 msg_sr; - u8 hop_limit; - u32 sl_tclass_flowlabel; - u32 dgid[4]; + __be32 port_pd; + u8 reserved1; + u8 g_slid; + __be16 dlid; + u8 reserved2; + u8 gid_index; + u8 msg_sr; + u8 hop_limit; + __be32 sl_tclass_flowlabel; + __be32 dgid[4]; }; int mthca_create_ah(struct mthca_dev *dev, @@ -128,7 +128,7 @@ on_hca_fail: av, (unsigned long) ah->avdma); for (j = 0; j < 8; ++j) printk(KERN_DEBUG " [%2x] %08x\n", - j * 4, be32_to_cpu(((u32 *) av)[j])); + j * 4, be32_to_cpu(((__be32 *) av)[j])); } if (ah->type == MTHCA_AH_ON_HCA) { @@ -169,7 +169,7 @@ int mthca_read_ah(struct mthca_dev *dev, struct mthca_ah *ah, header->lrh.service_level = be32_to_cpu(ah->av->sl_tclass_flowlabel) >> 28; header->lrh.destination_lid = ah->av->dlid; - header->lrh.source_lid = ah->av->g_slid & 0x7f; + header->lrh.source_lid = cpu_to_be16(ah->av->g_slid & 0x7f); if (ah->av->g_slid & 0x80) { header->grh_present = 1; header->grh.traffic_class = diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index 0ff5900e0930..1e60487ecd7f 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -220,20 +220,20 @@ static int mthca_cmd_post(struct mthca_dev *dev, * (and some architectures such as ia64 implement memcpy_toio * in terms of writeb). */ - __raw_writel(cpu_to_be32(in_param >> 32), dev->hcr + 0 * 4); - __raw_writel(cpu_to_be32(in_param & 0xfffffffful), dev->hcr + 1 * 4); - __raw_writel(cpu_to_be32(in_modifier), dev->hcr + 2 * 4); - __raw_writel(cpu_to_be32(out_param >> 32), dev->hcr + 3 * 4); - __raw_writel(cpu_to_be32(out_param & 0xfffffffful), dev->hcr + 4 * 4); - __raw_writel(cpu_to_be32(token << 16), dev->hcr + 5 * 4); + __raw_writel((__force u32) cpu_to_be32(in_param >> 32), dev->hcr + 0 * 4); + __raw_writel((__force u32) cpu_to_be32(in_param & 0xfffffffful), dev->hcr + 1 * 4); + __raw_writel((__force u32) cpu_to_be32(in_modifier), dev->hcr + 2 * 4); + __raw_writel((__force u32) cpu_to_be32(out_param >> 32), dev->hcr + 3 * 4); + __raw_writel((__force u32) cpu_to_be32(out_param & 0xfffffffful), dev->hcr + 4 * 4); + __raw_writel((__force u32) cpu_to_be32(token << 16), dev->hcr + 5 * 4); /* __raw_writel may not order writes. */ wmb(); - __raw_writel(cpu_to_be32((1 << HCR_GO_BIT) | - (event ? (1 << HCA_E_BIT) : 0) | - (op_modifier << HCR_OPMOD_SHIFT) | - op), dev->hcr + 6 * 4); + __raw_writel((__force u32) cpu_to_be32((1 << HCR_GO_BIT) | + (event ? (1 << HCA_E_BIT) : 0) | + (op_modifier << HCR_OPMOD_SHIFT) | + op), dev->hcr + 6 * 4); out: up(&dev->cmd.hcr_sem); @@ -274,12 +274,14 @@ static int mthca_cmd_poll(struct mthca_dev *dev, goto out; } - if (out_is_imm) { - memcpy_fromio(out_param, dev->hcr + HCR_OUT_PARAM_OFFSET, sizeof (u64)); - be64_to_cpus(out_param); - } + if (out_is_imm) + *out_param = + (u64) be32_to_cpu((__force __be32) + __raw_readl(dev->hcr + HCR_OUT_PARAM_OFFSET)) << 32 | + (u64) be32_to_cpu((__force __be32) + __raw_readl(dev->hcr + HCR_OUT_PARAM_OFFSET + 4)); - *status = be32_to_cpu(__raw_readl(dev->hcr + HCR_STATUS_OFFSET)) >> 24; + *status = be32_to_cpu((__force __be32) __raw_readl(dev->hcr + HCR_STATUS_OFFSET)) >> 24; out: up(&dev->cmd.poll_sem); @@ -1122,7 +1124,7 @@ int mthca_INIT_HCA(struct mthca_dev *dev, u8 *status) { struct mthca_mailbox *mailbox; - u32 *inbox; + __be32 *inbox; int err; #define INIT_HCA_IN_SIZE 0x200 @@ -1343,7 +1345,7 @@ int mthca_MAP_ICM(struct mthca_dev *dev, struct mthca_icm *icm, u64 virt, u8 *st int mthca_MAP_ICM_page(struct mthca_dev *dev, u64 dma_addr, u64 virt, u8 *status) { struct mthca_mailbox *mailbox; - u64 *inbox; + __be64 *inbox; int err; mailbox = mthca_alloc_mailbox(dev, GFP_KERNEL); @@ -1514,7 +1516,7 @@ int mthca_MODIFY_QP(struct mthca_dev *dev, int trans, u32 num, if (i % 8 == 0) printk(" [%02x] ", i * 4); printk(" %08x", - be32_to_cpu(((u32 *) mailbox->buf)[i + 2])); + be32_to_cpu(((__be32 *) mailbox->buf)[i + 2])); if ((i + 1) % 8 == 0) printk("\n"); } @@ -1534,7 +1536,7 @@ int mthca_MODIFY_QP(struct mthca_dev *dev, int trans, u32 num, if (i % 8 == 0) printk("[%02x] ", i * 4); printk(" %08x", - be32_to_cpu(((u32 *) mailbox->buf)[i + 2])); + be32_to_cpu(((__be32 *) mailbox->buf)[i + 2])); if ((i + 1) % 8 == 0) printk("\n"); } diff --git a/drivers/infiniband/hw/mthca/mthca_cq.c b/drivers/infiniband/hw/mthca/mthca_cq.c index bd7807cec50c..907867d1f2e0 100644 --- a/drivers/infiniband/hw/mthca/mthca_cq.c +++ b/drivers/infiniband/hw/mthca/mthca_cq.c @@ -57,21 +57,21 @@ enum { * Must be packed because start is 64 bits but only aligned to 32 bits. */ struct mthca_cq_context { - u32 flags; - u64 start; - u32 logsize_usrpage; - u32 error_eqn; /* Tavor only */ - u32 comp_eqn; - u32 pd; - u32 lkey; - u32 last_notified_index; - u32 solicit_producer_index; - u32 consumer_index; - u32 producer_index; - u32 cqn; - u32 ci_db; /* Arbel only */ - u32 state_db; /* Arbel only */ - u32 reserved; + __be32 flags; + __be64 start; + __be32 logsize_usrpage; + __be32 error_eqn; /* Tavor only */ + __be32 comp_eqn; + __be32 pd; + __be32 lkey; + __be32 last_notified_index; + __be32 solicit_producer_index; + __be32 consumer_index; + __be32 producer_index; + __be32 cqn; + __be32 ci_db; /* Arbel only */ + __be32 state_db; /* Arbel only */ + u32 reserved; } __attribute__((packed)); #define MTHCA_CQ_STATUS_OK ( 0 << 28) @@ -110,31 +110,31 @@ enum { }; struct mthca_cqe { - u32 my_qpn; - u32 my_ee; - u32 rqpn; - u16 sl_g_mlpath; - u16 rlid; - u32 imm_etype_pkey_eec; - u32 byte_cnt; - u32 wqe; - u8 opcode; - u8 is_send; - u8 reserved; - u8 owner; + __be32 my_qpn; + __be32 my_ee; + __be32 rqpn; + __be16 sl_g_mlpath; + __be16 rlid; + __be32 imm_etype_pkey_eec; + __be32 byte_cnt; + __be32 wqe; + u8 opcode; + u8 is_send; + u8 reserved; + u8 owner; }; struct mthca_err_cqe { - u32 my_qpn; - u32 reserved1[3]; - u8 syndrome; - u8 reserved2; - u16 db_cnt; - u32 reserved3; - u32 wqe; - u8 opcode; - u8 reserved4[2]; - u8 owner; + __be32 my_qpn; + u32 reserved1[3]; + u8 syndrome; + u8 reserved2; + __be16 db_cnt; + u32 reserved3; + __be32 wqe; + u8 opcode; + u8 reserved4[2]; + u8 owner; }; #define MTHCA_CQ_ENTRY_OWNER_SW (0 << 7) @@ -193,7 +193,7 @@ static void dump_cqe(struct mthca_dev *dev, void *cqe_ptr) static inline void update_cons_index(struct mthca_dev *dev, struct mthca_cq *cq, int incr) { - u32 doorbell[2]; + __be32 doorbell[2]; if (mthca_is_memfree(dev)) { *cq->set_ci_db = cpu_to_be32(cq->cons_index); @@ -293,7 +293,7 @@ static int handle_error_cqe(struct mthca_dev *dev, struct mthca_cq *cq, { int err; int dbd; - u32 new_wqe; + __be32 new_wqe; if (cqe->syndrome == SYNDROME_LOCAL_QP_OP_ERR) { mthca_dbg(dev, "local QP operation err " @@ -586,13 +586,13 @@ int mthca_poll_cq(struct ib_cq *ibcq, int num_entries, int mthca_tavor_arm_cq(struct ib_cq *cq, enum ib_cq_notify notify) { - u32 doorbell[2]; + __be32 doorbell[2]; doorbell[0] = cpu_to_be32((notify == IB_CQ_SOLICITED ? MTHCA_TAVOR_CQ_DB_REQ_NOT_SOL : MTHCA_TAVOR_CQ_DB_REQ_NOT) | to_mcq(cq)->cqn); - doorbell[1] = 0xffffffff; + doorbell[1] = (__force __be32) 0xffffffff; mthca_write64(doorbell, to_mdev(cq->device)->kar + MTHCA_CQ_DOORBELL, @@ -604,9 +604,9 @@ int mthca_tavor_arm_cq(struct ib_cq *cq, enum ib_cq_notify notify) int mthca_arbel_arm_cq(struct ib_cq *ibcq, enum ib_cq_notify notify) { struct mthca_cq *cq = to_mcq(ibcq); - u32 doorbell[2]; + __be32 doorbell[2]; u32 sn; - u32 ci; + __be32 ci; sn = cq->arm_sn & 3; ci = cpu_to_be32(cq->cons_index); @@ -813,7 +813,6 @@ int mthca_init_cq(struct mthca_dev *dev, int nent, cq_context->flags = cpu_to_be32(MTHCA_CQ_STATUS_OK | MTHCA_CQ_STATE_DISARMED | MTHCA_CQ_FLAG_TR); - cq_context->start = cpu_to_be64(0); cq_context->logsize_usrpage = cpu_to_be32((ffs(nent) - 1) << 24); if (ctx) cq_context->logsize_usrpage |= cpu_to_be32(ctx->uar.index); @@ -906,7 +905,7 @@ void mthca_free_cq(struct mthca_dev *dev, mthca_warn(dev, "HW2SW_CQ returned status 0x%02x\n", status); if (0) { - u32 *ctx = mailbox->buf; + __be32 *ctx = mailbox->buf; int j; printk(KERN_ERR "context for CQN %x (cons index %x, next sw %d)\n", diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index 33162a960c72..3519ca4e086c 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -333,14 +333,13 @@ extern void __buggy_use_of_MTHCA_PUT(void); #define MTHCA_PUT(dest, source, offset) \ do { \ - __typeof__(source) *__p = \ - (__typeof__(source) *) ((char *) (dest) + (offset)); \ + void *__d = ((char *) (dest) + (offset)); \ switch (sizeof(source)) { \ - case 1: *__p = (source); break; \ - case 2: *__p = cpu_to_be16(source); break; \ - case 4: *__p = cpu_to_be32(source); break; \ - case 8: *__p = cpu_to_be64(source); break; \ - default: __buggy_use_of_MTHCA_PUT(); \ + case 1: *(u8 *) __d = (source); break; \ + case 2: *(__be16 *) __d = cpu_to_be16(source); break; \ + case 4: *(__be32 *) __d = cpu_to_be32(source); break; \ + case 8: *(__be64 *) __d = cpu_to_be64(source); break; \ + default: __buggy_use_of_MTHCA_PUT(); \ } \ } while (0) @@ -435,7 +434,7 @@ int mthca_arbel_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, int mthca_arbel_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr, struct ib_recv_wr **bad_wr); int mthca_free_err_wqe(struct mthca_dev *dev, struct mthca_qp *qp, int is_send, - int index, int *dbd, u32 *new_wqe); + int index, int *dbd, __be32 *new_wqe); int mthca_alloc_qp(struct mthca_dev *dev, struct mthca_pd *pd, struct mthca_cq *send_cq, diff --git a/drivers/infiniband/hw/mthca/mthca_doorbell.h b/drivers/infiniband/hw/mthca/mthca_doorbell.h index 3be4a4a606a2..dd9a44d170c9 100644 --- a/drivers/infiniband/hw/mthca/mthca_doorbell.h +++ b/drivers/infiniband/hw/mthca/mthca_doorbell.h @@ -58,13 +58,13 @@ static inline void mthca_write64_raw(__be64 val, void __iomem *dest) __raw_writeq((__force u64) val, dest); } -static inline void mthca_write64(u32 val[2], void __iomem *dest, +static inline void mthca_write64(__be32 val[2], void __iomem *dest, spinlock_t *doorbell_lock) { __raw_writeq(*(u64 *) val, dest); } -static inline void mthca_write_db_rec(u32 val[2], u32 *db) +static inline void mthca_write_db_rec(__be32 val[2], __be32 *db) { *(u64 *) db = *(u64 *) val; } @@ -87,18 +87,18 @@ static inline void mthca_write64_raw(__be64 val, void __iomem *dest) __raw_writel(((__force u32 *) &val)[1], dest + 4); } -static inline void mthca_write64(u32 val[2], void __iomem *dest, +static inline void mthca_write64(__be32 val[2], void __iomem *dest, spinlock_t *doorbell_lock) { unsigned long flags; spin_lock_irqsave(doorbell_lock, flags); - __raw_writel(val[0], dest); - __raw_writel(val[1], dest + 4); + __raw_writel((__force u32) val[0], dest); + __raw_writel((__force u32) val[1], dest + 4); spin_unlock_irqrestore(doorbell_lock, flags); } -static inline void mthca_write_db_rec(u32 val[2], u32 *db) +static inline void mthca_write_db_rec(__be32 val[2], __be32 *db) { db[0] = val[0]; wmb(); diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c index 54a809adab6d..18f0981eb0c1 100644 --- a/drivers/infiniband/hw/mthca/mthca_eq.c +++ b/drivers/infiniband/hw/mthca/mthca_eq.c @@ -52,18 +52,18 @@ enum { * Must be packed because start is 64 bits but only aligned to 32 bits. */ struct mthca_eq_context { - u32 flags; - u64 start; - u32 logsize_usrpage; - u32 tavor_pd; /* reserved for Arbel */ - u8 reserved1[3]; - u8 intr; - u32 arbel_pd; /* lost_count for Tavor */ - u32 lkey; - u32 reserved2[2]; - u32 consumer_index; - u32 producer_index; - u32 reserved3[4]; + __be32 flags; + __be64 start; + __be32 logsize_usrpage; + __be32 tavor_pd; /* reserved for Arbel */ + u8 reserved1[3]; + u8 intr; + __be32 arbel_pd; /* lost_count for Tavor */ + __be32 lkey; + u32 reserved2[2]; + __be32 consumer_index; + __be32 producer_index; + u32 reserved3[4]; } __attribute__((packed)); #define MTHCA_EQ_STATUS_OK ( 0 << 28) @@ -128,28 +128,28 @@ struct mthca_eqe { union { u32 raw[6]; struct { - u32 cqn; + __be32 cqn; } __attribute__((packed)) comp; struct { - u16 reserved1; - u16 token; - u32 reserved2; - u8 reserved3[3]; - u8 status; - u64 out_param; + u16 reserved1; + __be16 token; + u32 reserved2; + u8 reserved3[3]; + u8 status; + __be64 out_param; } __attribute__((packed)) cmd; struct { - u32 qpn; + __be32 qpn; } __attribute__((packed)) qp; struct { - u32 cqn; - u32 reserved1; - u8 reserved2[3]; - u8 syndrome; + __be32 cqn; + u32 reserved1; + u8 reserved2[3]; + u8 syndrome; } __attribute__((packed)) cq_err; struct { - u32 reserved1[2]; - u32 port; + u32 reserved1[2]; + __be32 port; } __attribute__((packed)) port_change; } event; u8 reserved3[3]; @@ -168,7 +168,7 @@ static inline u64 async_mask(struct mthca_dev *dev) static inline void tavor_set_eq_ci(struct mthca_dev *dev, struct mthca_eq *eq, u32 ci) { - u32 doorbell[2]; + __be32 doorbell[2]; doorbell[0] = cpu_to_be32(MTHCA_EQ_DB_SET_CI | eq->eqn); doorbell[1] = cpu_to_be32(ci & (eq->nent - 1)); @@ -191,8 +191,8 @@ static inline void arbel_set_eq_ci(struct mthca_dev *dev, struct mthca_eq *eq, u { /* See comment in tavor_set_eq_ci() above. */ wmb(); - __raw_writel(cpu_to_be32(ci), dev->eq_regs.arbel.eq_set_ci_base + - eq->eqn * 8); + __raw_writel((__force u32) cpu_to_be32(ci), + dev->eq_regs.arbel.eq_set_ci_base + eq->eqn * 8); /* We still want ordering, just not swabbing, so add a barrier */ mb(); } @@ -207,7 +207,7 @@ static inline void set_eq_ci(struct mthca_dev *dev, struct mthca_eq *eq, u32 ci) static inline void tavor_eq_req_not(struct mthca_dev *dev, int eqn) { - u32 doorbell[2]; + __be32 doorbell[2]; doorbell[0] = cpu_to_be32(MTHCA_EQ_DB_REQ_NOT | eqn); doorbell[1] = 0; @@ -225,7 +225,7 @@ static inline void arbel_eq_req_not(struct mthca_dev *dev, u32 eqn_mask) static inline void disarm_cq(struct mthca_dev *dev, int eqn, int cqn) { if (!mthca_is_memfree(dev)) { - u32 doorbell[2]; + __be32 doorbell[2]; doorbell[0] = cpu_to_be32(MTHCA_EQ_DB_DISARM_CQ | eqn); doorbell[1] = cpu_to_be32(cqn); diff --git a/drivers/infiniband/hw/mthca/mthca_mad.c b/drivers/infiniband/hw/mthca/mthca_mad.c index 3c7fae6cb12f..64fa78722cf6 100644 --- a/drivers/infiniband/hw/mthca/mthca_mad.c +++ b/drivers/infiniband/hw/mthca/mthca_mad.c @@ -194,7 +194,7 @@ int mthca_process_mad(struct ib_device *ibdev, { int err; u8 status; - u16 slid = in_wc ? in_wc->slid : IB_LID_PERMISSIVE; + u16 slid = in_wc ? in_wc->slid : be16_to_cpu(IB_LID_PERMISSIVE); /* Forward locally generated traps to the SM */ if (in_mad->mad_hdr.method == IB_MGMT_METHOD_TRAP && diff --git a/drivers/infiniband/hw/mthca/mthca_mcg.c b/drivers/infiniband/hw/mthca/mthca_mcg.c index 5be7d949dbf6..a2707605f4c8 100644 --- a/drivers/infiniband/hw/mthca/mthca_mcg.c +++ b/drivers/infiniband/hw/mthca/mthca_mcg.c @@ -42,10 +42,10 @@ enum { }; struct mthca_mgm { - u32 next_gid_index; - u32 reserved[3]; - u8 gid[16]; - u32 qp[MTHCA_QP_PER_MGM]; + __be32 next_gid_index; + u32 reserved[3]; + u8 gid[16]; + __be32 qp[MTHCA_QP_PER_MGM]; }; static const u8 zero_gid[16]; /* automatically initialized to 0 */ @@ -94,10 +94,14 @@ static int find_mgm(struct mthca_dev *dev, if (0) mthca_dbg(dev, "Hash for %04x:%04x:%04x:%04x:" "%04x:%04x:%04x:%04x is %04x\n", - be16_to_cpu(((u16 *) gid)[0]), be16_to_cpu(((u16 *) gid)[1]), - be16_to_cpu(((u16 *) gid)[2]), be16_to_cpu(((u16 *) gid)[3]), - be16_to_cpu(((u16 *) gid)[4]), be16_to_cpu(((u16 *) gid)[5]), - be16_to_cpu(((u16 *) gid)[6]), be16_to_cpu(((u16 *) gid)[7]), + be16_to_cpu(((__be16 *) gid)[0]), + be16_to_cpu(((__be16 *) gid)[1]), + be16_to_cpu(((__be16 *) gid)[2]), + be16_to_cpu(((__be16 *) gid)[3]), + be16_to_cpu(((__be16 *) gid)[4]), + be16_to_cpu(((__be16 *) gid)[5]), + be16_to_cpu(((__be16 *) gid)[6]), + be16_to_cpu(((__be16 *) gid)[7]), *hash); *index = *hash; @@ -258,14 +262,14 @@ int mthca_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) if (index == -1) { mthca_err(dev, "MGID %04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x " "not found\n", - be16_to_cpu(((u16 *) gid->raw)[0]), - be16_to_cpu(((u16 *) gid->raw)[1]), - be16_to_cpu(((u16 *) gid->raw)[2]), - be16_to_cpu(((u16 *) gid->raw)[3]), - be16_to_cpu(((u16 *) gid->raw)[4]), - be16_to_cpu(((u16 *) gid->raw)[5]), - be16_to_cpu(((u16 *) gid->raw)[6]), - be16_to_cpu(((u16 *) gid->raw)[7])); + be16_to_cpu(((__be16 *) gid->raw)[0]), + be16_to_cpu(((__be16 *) gid->raw)[1]), + be16_to_cpu(((__be16 *) gid->raw)[2]), + be16_to_cpu(((__be16 *) gid->raw)[3]), + be16_to_cpu(((__be16 *) gid->raw)[4]), + be16_to_cpu(((__be16 *) gid->raw)[5]), + be16_to_cpu(((__be16 *) gid->raw)[6]), + be16_to_cpu(((__be16 *) gid->raw)[7])); err = -EINVAL; goto out; } diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c index 9efb0322c761..fba0a53ba6ea 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.c +++ b/drivers/infiniband/hw/mthca/mthca_memfree.c @@ -482,7 +482,7 @@ void mthca_cleanup_user_db_tab(struct mthca_dev *dev, struct mthca_uar *uar, } } -int mthca_alloc_db(struct mthca_dev *dev, int type, u32 qn, u32 **db) +int mthca_alloc_db(struct mthca_dev *dev, int type, u32 qn, __be32 **db) { int group; int start, end, dir; @@ -565,7 +565,7 @@ found: page->db_rec[j] = cpu_to_be64((qn << 8) | (type << 5)); - *db = (u32 *) &page->db_rec[j]; + *db = (__be32 *) &page->db_rec[j]; out: up(&dev->db_tab->mutex); diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.h b/drivers/infiniband/hw/mthca/mthca_memfree.h index 59c2f555b13b..bafa51544aa3 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.h +++ b/drivers/infiniband/hw/mthca/mthca_memfree.h @@ -138,7 +138,7 @@ enum { struct mthca_db_page { DECLARE_BITMAP(used, MTHCA_DB_REC_PER_PAGE); - u64 *db_rec; + __be64 *db_rec; dma_addr_t mapping; }; @@ -173,7 +173,7 @@ void mthca_cleanup_user_db_tab(struct mthca_dev *dev, struct mthca_uar *uar, int mthca_init_db_tab(struct mthca_dev *dev); void mthca_cleanup_db_tab(struct mthca_dev *dev); -int mthca_alloc_db(struct mthca_dev *dev, int type, u32 qn, u32 **db); +int mthca_alloc_db(struct mthca_dev *dev, int type, u32 qn, __be32 **db); void mthca_free_db(struct mthca_dev *dev, int type, int db_index); #endif /* MTHCA_MEMFREE_H */ diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c index 15d9f8f290a0..0965e66061b7 100644 --- a/drivers/infiniband/hw/mthca/mthca_mr.c +++ b/drivers/infiniband/hw/mthca/mthca_mr.c @@ -51,18 +51,18 @@ struct mthca_mtt { * Must be packed because mtt_seg is 64 bits but only aligned to 32 bits. */ struct mthca_mpt_entry { - u32 flags; - u32 page_size; - u32 key; - u32 pd; - u64 start; - u64 length; - u32 lkey; - u32 window_count; - u32 window_count_limit; - u64 mtt_seg; - u32 mtt_sz; /* Arbel only */ - u32 reserved[2]; + __be32 flags; + __be32 page_size; + __be32 key; + __be32 pd; + __be64 start; + __be64 length; + __be32 lkey; + __be32 window_count; + __be32 window_count_limit; + __be64 mtt_seg; + __be32 mtt_sz; /* Arbel only */ + u32 reserved[2]; } __attribute__((packed)); #define MTHCA_MPT_FLAG_SW_OWNS (0xfUL << 28) @@ -248,7 +248,7 @@ int mthca_write_mtt(struct mthca_dev *dev, struct mthca_mtt *mtt, int start_index, u64 *buffer_list, int list_len) { struct mthca_mailbox *mailbox; - u64 *mtt_entry; + __be64 *mtt_entry; int err = 0; u8 status; int i; @@ -390,7 +390,7 @@ int mthca_mr_alloc(struct mthca_dev *dev, u32 pd, int buffer_size_shift, for (i = 0; i < sizeof (struct mthca_mpt_entry) / 4; ++i) { if (i % 4 == 0) printk("[%02x] ", i * 4); - printk(" %08x", be32_to_cpu(((u32 *) mpt_entry)[i])); + printk(" %08x", be32_to_cpu(((__be32 *) mpt_entry)[i])); if ((i + 1) % 4 == 0) printk("\n"); } @@ -563,7 +563,7 @@ int mthca_fmr_alloc(struct mthca_dev *dev, u32 pd, for (i = 0; i < sizeof (struct mthca_mpt_entry) / 4; ++i) { if (i % 4 == 0) printk("[%02x] ", i * 4); - printk(" %08x", be32_to_cpu(((u32 *) mpt_entry)[i])); + printk(" %08x", be32_to_cpu(((__be32 *) mpt_entry)[i])); if ((i + 1) % 4 == 0) printk("\n"); } @@ -670,7 +670,7 @@ int mthca_tavor_map_phys_fmr(struct ib_fmr *ibfmr, u64 *page_list, mpt_entry.length = cpu_to_be64(list_len * (1ull << fmr->attr.page_size)); mpt_entry.start = cpu_to_be64(iova); - writel(mpt_entry.lkey, &fmr->mem.tavor.mpt->key); + __raw_writel((__force u32) mpt_entry.lkey, &fmr->mem.tavor.mpt->key); memcpy_toio(&fmr->mem.tavor.mpt->start, &mpt_entry.start, offsetof(struct mthca_mpt_entry, window_count) - offsetof(struct mthca_mpt_entry, start)); diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 34e6b8685ba3..e2db5e001869 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -81,10 +81,10 @@ static int mthca_query_device(struct ib_device *ibdev, } props->device_cap_flags = mdev->device_cap_flags; - props->vendor_id = be32_to_cpup((u32 *) (out_mad->data + 36)) & + props->vendor_id = be32_to_cpup((__be32 *) (out_mad->data + 36)) & 0xffffff; - props->vendor_part_id = be16_to_cpup((u16 *) (out_mad->data + 30)); - props->hw_ver = be16_to_cpup((u16 *) (out_mad->data + 32)); + props->vendor_part_id = be16_to_cpup((__be16 *) (out_mad->data + 30)); + props->hw_ver = be16_to_cpup((__be16 *) (out_mad->data + 32)); memcpy(&props->sys_image_guid, out_mad->data + 4, 8); memcpy(&props->node_guid, out_mad->data + 12, 8); @@ -138,16 +138,16 @@ static int mthca_query_port(struct ib_device *ibdev, goto out; } - props->lid = be16_to_cpup((u16 *) (out_mad->data + 16)); + props->lid = be16_to_cpup((__be16 *) (out_mad->data + 16)); props->lmc = out_mad->data[34] & 0x7; - props->sm_lid = be16_to_cpup((u16 *) (out_mad->data + 18)); + props->sm_lid = be16_to_cpup((__be16 *) (out_mad->data + 18)); props->sm_sl = out_mad->data[36] & 0xf; props->state = out_mad->data[32] & 0xf; props->phys_state = out_mad->data[33] >> 4; - props->port_cap_flags = be32_to_cpup((u32 *) (out_mad->data + 20)); + props->port_cap_flags = be32_to_cpup((__be32 *) (out_mad->data + 20)); props->gid_tbl_len = to_mdev(ibdev)->limits.gid_table_len; props->pkey_tbl_len = to_mdev(ibdev)->limits.pkey_table_len; - props->qkey_viol_cntr = be16_to_cpup((u16 *) (out_mad->data + 48)); + props->qkey_viol_cntr = be16_to_cpup((__be16 *) (out_mad->data + 48)); props->active_width = out_mad->data[31] & 0xf; props->active_speed = out_mad->data[35] >> 4; @@ -223,7 +223,7 @@ static int mthca_query_pkey(struct ib_device *ibdev, goto out; } - *pkey = be16_to_cpu(((u16 *) out_mad->data)[index % 32]); + *pkey = be16_to_cpu(((__be16 *) out_mad->data)[index % 32]); out: kfree(in_mad); diff --git a/drivers/infiniband/hw/mthca/mthca_provider.h b/drivers/infiniband/hw/mthca/mthca_provider.h index 727aad8d4f33..624651edf577 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.h +++ b/drivers/infiniband/hw/mthca/mthca_provider.h @@ -182,9 +182,9 @@ struct mthca_cq { /* Next fields are Arbel only */ int set_ci_db_index; - u32 *set_ci_db; + __be32 *set_ci_db; int arm_db_index; - u32 *arm_db; + __be32 *arm_db; int arm_sn; union { @@ -207,7 +207,7 @@ struct mthca_wq { int wqe_shift; int db_index; /* Arbel only */ - u32 *db; + __be32 *db; }; struct mthca_qp { diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 2f429815d195..8fbb4f1f5398 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -97,62 +97,62 @@ enum { }; struct mthca_qp_path { - u32 port_pkey; - u8 rnr_retry; - u8 g_mylmc; - u16 rlid; - u8 ackto; - u8 mgid_index; - u8 static_rate; - u8 hop_limit; - u32 sl_tclass_flowlabel; - u8 rgid[16]; + __be32 port_pkey; + u8 rnr_retry; + u8 g_mylmc; + __be16 rlid; + u8 ackto; + u8 mgid_index; + u8 static_rate; + u8 hop_limit; + __be32 sl_tclass_flowlabel; + u8 rgid[16]; } __attribute__((packed)); struct mthca_qp_context { - u32 flags; - u32 tavor_sched_queue; /* Reserved on Arbel */ - u8 mtu_msgmax; - u8 rq_size_stride; /* Reserved on Tavor */ - u8 sq_size_stride; /* Reserved on Tavor */ - u8 rlkey_arbel_sched_queue; /* Reserved on Tavor */ - u32 usr_page; - u32 local_qpn; - u32 remote_qpn; - u32 reserved1[2]; + __be32 flags; + __be32 tavor_sched_queue; /* Reserved on Arbel */ + u8 mtu_msgmax; + u8 rq_size_stride; /* Reserved on Tavor */ + u8 sq_size_stride; /* Reserved on Tavor */ + u8 rlkey_arbel_sched_queue; /* Reserved on Tavor */ + __be32 usr_page; + __be32 local_qpn; + __be32 remote_qpn; + u32 reserved1[2]; struct mthca_qp_path pri_path; struct mthca_qp_path alt_path; - u32 rdd; - u32 pd; - u32 wqe_base; - u32 wqe_lkey; - u32 params1; - u32 reserved2; - u32 next_send_psn; - u32 cqn_snd; - u32 snd_wqe_base_l; /* Next send WQE on Tavor */ - u32 snd_db_index; /* (debugging only entries) */ - u32 last_acked_psn; - u32 ssn; - u32 params2; - u32 rnr_nextrecvpsn; - u32 ra_buff_indx; - u32 cqn_rcv; - u32 rcv_wqe_base_l; /* Next recv WQE on Tavor */ - u32 rcv_db_index; /* (debugging only entries) */ - u32 qkey; - u32 srqn; - u32 rmsn; - u16 rq_wqe_counter; /* reserved on Tavor */ - u16 sq_wqe_counter; /* reserved on Tavor */ - u32 reserved3[18]; + __be32 rdd; + __be32 pd; + __be32 wqe_base; + __be32 wqe_lkey; + __be32 params1; + __be32 reserved2; + __be32 next_send_psn; + __be32 cqn_snd; + __be32 snd_wqe_base_l; /* Next send WQE on Tavor */ + __be32 snd_db_index; /* (debugging only entries) */ + __be32 last_acked_psn; + __be32 ssn; + __be32 params2; + __be32 rnr_nextrecvpsn; + __be32 ra_buff_indx; + __be32 cqn_rcv; + __be32 rcv_wqe_base_l; /* Next recv WQE on Tavor */ + __be32 rcv_db_index; /* (debugging only entries) */ + __be32 qkey; + __be32 srqn; + __be32 rmsn; + __be16 rq_wqe_counter; /* reserved on Tavor */ + __be16 sq_wqe_counter; /* reserved on Tavor */ + u32 reserved3[18]; } __attribute__((packed)); struct mthca_qp_param { - u32 opt_param_mask; - u32 reserved1; + __be32 opt_param_mask; + u32 reserved1; struct mthca_qp_context context; - u32 reserved2[62]; + u32 reserved2[62]; } __attribute__((packed)); enum { @@ -191,62 +191,62 @@ enum { }; struct mthca_next_seg { - u32 nda_op; /* [31:6] next WQE [4:0] next opcode */ - u32 ee_nds; /* [31:8] next EE [7] DBD [6] F [5:0] next WQE size */ - u32 flags; /* [3] CQ [2] Event [1] Solicit */ - u32 imm; /* immediate data */ + __be32 nda_op; /* [31:6] next WQE [4:0] next opcode */ + __be32 ee_nds; /* [31:8] next EE [7] DBD [6] F [5:0] next WQE size */ + __be32 flags; /* [3] CQ [2] Event [1] Solicit */ + __be32 imm; /* immediate data */ }; struct mthca_tavor_ud_seg { - u32 reserved1; - u32 lkey; - u64 av_addr; - u32 reserved2[4]; - u32 dqpn; - u32 qkey; - u32 reserved3[2]; + u32 reserved1; + __be32 lkey; + __be64 av_addr; + u32 reserved2[4]; + __be32 dqpn; + __be32 qkey; + u32 reserved3[2]; }; struct mthca_arbel_ud_seg { - u32 av[8]; - u32 dqpn; - u32 qkey; - u32 reserved[2]; + __be32 av[8]; + __be32 dqpn; + __be32 qkey; + u32 reserved[2]; }; struct mthca_bind_seg { - u32 flags; /* [31] Atomic [30] rem write [29] rem read */ - u32 reserved; - u32 new_rkey; - u32 lkey; - u64 addr; - u64 length; + __be32 flags; /* [31] Atomic [30] rem write [29] rem read */ + u32 reserved; + __be32 new_rkey; + __be32 lkey; + __be64 addr; + __be64 length; }; struct mthca_raddr_seg { - u64 raddr; - u32 rkey; - u32 reserved; + __be64 raddr; + __be32 rkey; + u32 reserved; }; struct mthca_atomic_seg { - u64 swap_add; - u64 compare; + __be64 swap_add; + __be64 compare; }; struct mthca_data_seg { - u32 byte_count; - u32 lkey; - u64 addr; + __be32 byte_count; + __be32 lkey; + __be64 addr; }; struct mthca_mlx_seg { - u32 nda_op; - u32 nds; - u32 flags; /* [17] VL15 [16] SLR [14:12] static rate + __be32 nda_op; + __be32 nds; + __be32 flags; /* [17] VL15 [16] SLR [14:12] static rate [11:8] SL [3] C [2] E */ - u16 rlid; - u16 vcrc; + __be16 rlid; + __be16 vcrc; }; static const u8 mthca_opcode[] = { @@ -1459,6 +1459,7 @@ static int build_mlx_header(struct mthca_dev *dev, struct mthca_sqp *sqp, { int header_size; int err; + u16 pkey; ib_ud_header_init(256, /* assume a MAD */ sqp->ud_header.grh_present, @@ -1469,8 +1470,8 @@ static int build_mlx_header(struct mthca_dev *dev, struct mthca_sqp *sqp, return err; mlx->flags &= ~cpu_to_be32(MTHCA_NEXT_SOLICIT | 1); mlx->flags |= cpu_to_be32((!sqp->qp.ibqp.qp_num ? MTHCA_MLX_VL15 : 0) | - (sqp->ud_header.lrh.destination_lid == 0xffff ? - MTHCA_MLX_SLR : 0) | + (sqp->ud_header.lrh.destination_lid == + IB_LID_PERMISSIVE ? MTHCA_MLX_SLR : 0) | (sqp->ud_header.lrh.service_level << 8)); mlx->rlid = sqp->ud_header.lrh.destination_lid; mlx->vcrc = 0; @@ -1490,18 +1491,16 @@ static int build_mlx_header(struct mthca_dev *dev, struct mthca_sqp *sqp, } sqp->ud_header.lrh.virtual_lane = !sqp->qp.ibqp.qp_num ? 15 : 0; - if (sqp->ud_header.lrh.destination_lid == 0xffff) - sqp->ud_header.lrh.source_lid = 0xffff; + if (sqp->ud_header.lrh.destination_lid == IB_LID_PERMISSIVE) + sqp->ud_header.lrh.source_lid = IB_LID_PERMISSIVE; sqp->ud_header.bth.solicited_event = !!(wr->send_flags & IB_SEND_SOLICITED); if (!sqp->qp.ibqp.qp_num) ib_get_cached_pkey(&dev->ib_dev, sqp->port, - sqp->pkey_index, - &sqp->ud_header.bth.pkey); + sqp->pkey_index, &pkey); else ib_get_cached_pkey(&dev->ib_dev, sqp->port, - wr->wr.ud.pkey_index, - &sqp->ud_header.bth.pkey); - cpu_to_be16s(&sqp->ud_header.bth.pkey); + wr->wr.ud.pkey_index, &pkey); + sqp->ud_header.bth.pkey = cpu_to_be16(pkey); sqp->ud_header.bth.destination_qpn = cpu_to_be32(wr->wr.ud.remote_qpn); sqp->ud_header.bth.psn = cpu_to_be32((sqp->send_psn++) & ((1 << 24) - 1)); sqp->ud_header.deth.qkey = cpu_to_be32(wr->wr.ud.remote_qkey & 0x80000000 ? @@ -1744,7 +1743,7 @@ int mthca_tavor_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, out: if (likely(nreq)) { - u32 doorbell[2]; + __be32 doorbell[2]; doorbell[0] = cpu_to_be32(((qp->sq.next_ind << qp->sq.wqe_shift) + qp->send_wqe_offset) | f0 | op0); @@ -1845,7 +1844,7 @@ int mthca_tavor_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr, out: if (likely(nreq)) { - u32 doorbell[2]; + __be32 doorbell[2]; doorbell[0] = cpu_to_be32((qp->rq.next_ind << qp->rq.wqe_shift) | size0); doorbell[1] = cpu_to_be32((qp->qpn << 8) | nreq); @@ -2066,7 +2065,7 @@ int mthca_arbel_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, out: if (likely(nreq)) { - u32 doorbell[2]; + __be32 doorbell[2]; doorbell[0] = cpu_to_be32((nreq << 24) | ((qp->sq.head & 0xffff) << 8) | @@ -2176,7 +2175,7 @@ out: } int mthca_free_err_wqe(struct mthca_dev *dev, struct mthca_qp *qp, int is_send, - int index, int *dbd, u32 *new_wqe) + int index, int *dbd, __be32 *new_wqe) { struct mthca_next_seg *next; diff --git a/drivers/infiniband/include/ib_cm.h b/drivers/infiniband/include/ib_cm.h index da650115e79a..8202ad2e6435 100644 --- a/drivers/infiniband/include/ib_cm.h +++ b/drivers/infiniband/include/ib_cm.h @@ -115,7 +115,7 @@ struct ib_cm_req_event_param { struct ib_sa_path_rec *primary_path; struct ib_sa_path_rec *alternate_path; - u64 remote_ca_guid; + __be64 remote_ca_guid; u32 remote_qkey; u32 remote_qpn; enum ib_qp_type qp_type; @@ -132,7 +132,7 @@ struct ib_cm_req_event_param { }; struct ib_cm_rep_event_param { - u64 remote_ca_guid; + __be64 remote_ca_guid; u32 remote_qkey; u32 remote_qpn; u32 starting_psn; @@ -146,39 +146,39 @@ struct ib_cm_rep_event_param { }; enum ib_cm_rej_reason { - IB_CM_REJ_NO_QP = __constant_htons(1), - IB_CM_REJ_NO_EEC = __constant_htons(2), - IB_CM_REJ_NO_RESOURCES = __constant_htons(3), - IB_CM_REJ_TIMEOUT = __constant_htons(4), - IB_CM_REJ_UNSUPPORTED = __constant_htons(5), - IB_CM_REJ_INVALID_COMM_ID = __constant_htons(6), - IB_CM_REJ_INVALID_COMM_INSTANCE = __constant_htons(7), - IB_CM_REJ_INVALID_SERVICE_ID = __constant_htons(8), - IB_CM_REJ_INVALID_TRANSPORT_TYPE = __constant_htons(9), - IB_CM_REJ_STALE_CONN = __constant_htons(10), - IB_CM_REJ_RDC_NOT_EXIST = __constant_htons(11), - IB_CM_REJ_INVALID_GID = __constant_htons(12), - IB_CM_REJ_INVALID_LID = __constant_htons(13), - IB_CM_REJ_INVALID_SL = __constant_htons(14), - IB_CM_REJ_INVALID_TRAFFIC_CLASS = __constant_htons(15), - IB_CM_REJ_INVALID_HOP_LIMIT = __constant_htons(16), - IB_CM_REJ_INVALID_PACKET_RATE = __constant_htons(17), - IB_CM_REJ_INVALID_ALT_GID = __constant_htons(18), - IB_CM_REJ_INVALID_ALT_LID = __constant_htons(19), - IB_CM_REJ_INVALID_ALT_SL = __constant_htons(20), - IB_CM_REJ_INVALID_ALT_TRAFFIC_CLASS = __constant_htons(21), - IB_CM_REJ_INVALID_ALT_HOP_LIMIT = __constant_htons(22), - IB_CM_REJ_INVALID_ALT_PACKET_RATE = __constant_htons(23), - IB_CM_REJ_PORT_CM_REDIRECT = __constant_htons(24), - IB_CM_REJ_PORT_REDIRECT = __constant_htons(25), - IB_CM_REJ_INVALID_MTU = __constant_htons(26), - IB_CM_REJ_INSUFFICIENT_RESP_RESOURCES = __constant_htons(27), - IB_CM_REJ_CONSUMER_DEFINED = __constant_htons(28), - IB_CM_REJ_INVALID_RNR_RETRY = __constant_htons(29), - IB_CM_REJ_DUPLICATE_LOCAL_COMM_ID = __constant_htons(30), - IB_CM_REJ_INVALID_CLASS_VERSION = __constant_htons(31), - IB_CM_REJ_INVALID_FLOW_LABEL = __constant_htons(32), - IB_CM_REJ_INVALID_ALT_FLOW_LABEL = __constant_htons(33) + IB_CM_REJ_NO_QP = 1, + IB_CM_REJ_NO_EEC = 2, + IB_CM_REJ_NO_RESOURCES = 3, + IB_CM_REJ_TIMEOUT = 4, + IB_CM_REJ_UNSUPPORTED = 5, + IB_CM_REJ_INVALID_COMM_ID = 6, + IB_CM_REJ_INVALID_COMM_INSTANCE = 7, + IB_CM_REJ_INVALID_SERVICE_ID = 8, + IB_CM_REJ_INVALID_TRANSPORT_TYPE = 9, + IB_CM_REJ_STALE_CONN = 10, + IB_CM_REJ_RDC_NOT_EXIST = 11, + IB_CM_REJ_INVALID_GID = 12, + IB_CM_REJ_INVALID_LID = 13, + IB_CM_REJ_INVALID_SL = 14, + IB_CM_REJ_INVALID_TRAFFIC_CLASS = 15, + IB_CM_REJ_INVALID_HOP_LIMIT = 16, + IB_CM_REJ_INVALID_PACKET_RATE = 17, + IB_CM_REJ_INVALID_ALT_GID = 18, + IB_CM_REJ_INVALID_ALT_LID = 19, + IB_CM_REJ_INVALID_ALT_SL = 20, + IB_CM_REJ_INVALID_ALT_TRAFFIC_CLASS = 21, + IB_CM_REJ_INVALID_ALT_HOP_LIMIT = 22, + IB_CM_REJ_INVALID_ALT_PACKET_RATE = 23, + IB_CM_REJ_PORT_CM_REDIRECT = 24, + IB_CM_REJ_PORT_REDIRECT = 25, + IB_CM_REJ_INVALID_MTU = 26, + IB_CM_REJ_INSUFFICIENT_RESP_RESOURCES = 27, + IB_CM_REJ_CONSUMER_DEFINED = 28, + IB_CM_REJ_INVALID_RNR_RETRY = 29, + IB_CM_REJ_DUPLICATE_LOCAL_COMM_ID = 30, + IB_CM_REJ_INVALID_CLASS_VERSION = 31, + IB_CM_REJ_INVALID_FLOW_LABEL = 32, + IB_CM_REJ_INVALID_ALT_FLOW_LABEL = 33 }; struct ib_cm_rej_event_param { @@ -222,8 +222,7 @@ struct ib_cm_sidr_req_event_param { struct ib_cm_id *listen_id; struct ib_device *device; u8 port; - - u16 pkey; + u16 pkey; }; enum ib_cm_sidr_status { @@ -285,12 +284,12 @@ typedef int (*ib_cm_handler)(struct ib_cm_id *cm_id, struct ib_cm_id { ib_cm_handler cm_handler; void *context; - u64 service_id; - u64 service_mask; + __be64 service_id; + __be64 service_mask; enum ib_cm_state state; /* internal CM/debug use */ enum ib_cm_lap_state lap_state; /* internal CM/debug use */ - u32 local_id; - u32 remote_id; + __be32 local_id; + __be32 remote_id; }; /** @@ -330,13 +329,13 @@ void ib_destroy_cm_id(struct ib_cm_id *cm_id); * IB_CM_ASSIGN_SERVICE_ID. */ int ib_cm_listen(struct ib_cm_id *cm_id, - u64 service_id, - u64 service_mask); + __be64 service_id, + __be64 service_mask); struct ib_cm_req_param { struct ib_sa_path_rec *primary_path; struct ib_sa_path_rec *alternate_path; - u64 service_id; + __be64 service_id; u32 qp_num; enum ib_qp_type qp_type; u32 starting_psn; @@ -528,7 +527,7 @@ int ib_send_cm_apr(struct ib_cm_id *cm_id, struct ib_cm_sidr_req_param { struct ib_sa_path_rec *path; - u64 service_id; + __be64 service_id; int timeout_ms; const void *private_data; u8 private_data_len; diff --git a/drivers/infiniband/include/ib_mad.h b/drivers/infiniband/include/ib_mad.h index 491b6f25b3b8..63237805d6af 100644 --- a/drivers/infiniband/include/ib_mad.h +++ b/drivers/infiniband/include/ib_mad.h @@ -111,12 +111,12 @@ struct ib_mad_hdr { u8 mgmt_class; u8 class_version; u8 method; - u16 status; - u16 class_specific; - u64 tid; - u16 attr_id; - u16 resv; - u32 attr_mod; + __be16 status; + __be16 class_specific; + __be64 tid; + __be16 attr_id; + __be16 resv; + __be32 attr_mod; }; struct ib_rmpp_hdr { @@ -124,8 +124,8 @@ struct ib_rmpp_hdr { u8 rmpp_type; u8 rmpp_rtime_flags; u8 rmpp_status; - u32 seg_num; - u32 paylen_newwin; + __be32 seg_num; + __be32 paylen_newwin; }; typedef u64 __bitwise ib_sa_comp_mask; @@ -139,9 +139,9 @@ typedef u64 __bitwise ib_sa_comp_mask; * the wire so we can't change the layout) */ struct ib_sa_hdr { - u64 sm_key; - u16 attr_offset; - u16 reserved; + __be64 sm_key; + __be16 attr_offset; + __be16 reserved; ib_sa_comp_mask comp_mask; } __attribute__ ((packed)); diff --git a/drivers/infiniband/include/ib_sa.h b/drivers/infiniband/include/ib_sa.h index 6d999f7b5d93..326159c04aca 100644 --- a/drivers/infiniband/include/ib_sa.h +++ b/drivers/infiniband/include/ib_sa.h @@ -133,16 +133,16 @@ struct ib_sa_path_rec { /* reserved */ union ib_gid dgid; union ib_gid sgid; - u16 dlid; - u16 slid; + __be16 dlid; + __be16 slid; int raw_traffic; /* reserved */ - u32 flow_label; + __be32 flow_label; u8 hop_limit; u8 traffic_class; int reversible; u8 numb_path; - u16 pkey; + __be16 pkey; /* reserved */ u8 sl; u8 mtu_selector; @@ -176,18 +176,18 @@ struct ib_sa_path_rec { struct ib_sa_mcmember_rec { union ib_gid mgid; union ib_gid port_gid; - u32 qkey; - u16 mlid; + __be32 qkey; + __be16 mlid; u8 mtu_selector; u8 mtu; u8 traffic_class; - u16 pkey; + __be16 pkey; u8 rate_selector; u8 rate; u8 packet_life_time_selector; u8 packet_life_time; u8 sl; - u32 flow_label; + __be32 flow_label; u8 hop_limit; u8 scope; u8 join_state; @@ -238,7 +238,7 @@ struct ib_sa_mcmember_rec { struct ib_sa_service_rec { u64 id; union ib_gid gid; - u16 pkey; + __be16 pkey; /* reserved */ u32 lease; u8 key[16]; diff --git a/drivers/infiniband/include/ib_smi.h b/drivers/infiniband/include/ib_smi.h index ca8216514963..c07b31cb9499 100644 --- a/drivers/infiniband/include/ib_smi.h +++ b/drivers/infiniband/include/ib_smi.h @@ -41,8 +41,6 @@ #include -#define IB_LID_PERMISSIVE 0xFFFF - #define IB_SMP_DATA_SIZE 64 #define IB_SMP_MAX_PATH_HOPS 64 @@ -51,16 +49,16 @@ struct ib_smp { u8 mgmt_class; u8 class_version; u8 method; - u16 status; + __be16 status; u8 hop_ptr; u8 hop_cnt; - u64 tid; - u16 attr_id; - u16 resv; - u32 attr_mod; - u64 mkey; - u16 dr_slid; - u16 dr_dlid; + __be64 tid; + __be16 attr_id; + __be16 resv; + __be32 attr_mod; + __be64 mkey; + __be16 dr_slid; + __be16 dr_dlid; u8 reserved[28]; u8 data[IB_SMP_DATA_SIZE]; u8 initial_path[IB_SMP_MAX_PATH_HOPS]; diff --git a/drivers/infiniband/include/ib_user_cm.h b/drivers/infiniband/include/ib_user_cm.h index 500b1af6ff77..72182d16778b 100644 --- a/drivers/infiniband/include/ib_user_cm.h +++ b/drivers/infiniband/include/ib_user_cm.h @@ -88,15 +88,15 @@ struct ib_ucm_attr_id { }; struct ib_ucm_attr_id_resp { - __u64 service_id; - __u64 service_mask; - __u32 local_id; - __u32 remote_id; + __be64 service_id; + __be64 service_mask; + __be32 local_id; + __be32 remote_id; }; struct ib_ucm_listen { - __u64 service_id; - __u64 service_mask; + __be64 service_id; + __be64 service_mask; __u32 id; }; @@ -114,13 +114,13 @@ struct ib_ucm_private_data { struct ib_ucm_path_rec { __u8 dgid[16]; __u8 sgid[16]; - __u16 dlid; - __u16 slid; + __be16 dlid; + __be16 slid; __u32 raw_traffic; - __u32 flow_label; + __be32 flow_label; __u32 reversible; __u32 mtu; - __u16 pkey; + __be16 pkey; __u8 hop_limit; __u8 traffic_class; __u8 numb_path; @@ -138,7 +138,7 @@ struct ib_ucm_req { __u32 qpn; __u32 qp_type; __u32 psn; - __u64 sid; + __be64 sid; __u64 data; __u64 primary_path; __u64 alternate_path; @@ -200,7 +200,7 @@ struct ib_ucm_lap { struct ib_ucm_sidr_req { __u32 id; __u32 timeout; - __u64 sid; + __be64 sid; __u64 data; __u64 path; __u16 pkey; @@ -237,7 +237,7 @@ struct ib_ucm_req_event_resp { /* port */ struct ib_ucm_path_rec primary_path; struct ib_ucm_path_rec alternate_path; - __u64 remote_ca_guid; + __be64 remote_ca_guid; __u32 remote_qkey; __u32 remote_qpn; __u32 qp_type; @@ -253,7 +253,7 @@ struct ib_ucm_req_event_resp { }; struct ib_ucm_rep_event_resp { - __u64 remote_ca_guid; + __be64 remote_ca_guid; __u32 remote_qkey; __u32 remote_qpn; __u32 starting_psn; diff --git a/drivers/infiniband/include/ib_user_mad.h b/drivers/infiniband/include/ib_user_mad.h index a9a56b50aacc..44537aa32e62 100644 --- a/drivers/infiniband/include/ib_user_mad.h +++ b/drivers/infiniband/include/ib_user_mad.h @@ -70,8 +70,6 @@ * @traffic_class - Traffic class in GRH * @gid - Remote GID in GRH * @flow_label - Flow label in GRH - * - * All multi-byte quantities are stored in network (big endian) byte order. */ struct ib_user_mad_hdr { __u32 id; @@ -79,9 +77,9 @@ struct ib_user_mad_hdr { __u32 timeout_ms; __u32 retries; __u32 length; - __u32 qpn; - __u32 qkey; - __u16 lid; + __be32 qpn; + __be32 qkey; + __be16 lid; __u8 sl; __u8 path_bits; __u8 grh_present; @@ -89,7 +87,7 @@ struct ib_user_mad_hdr { __u8 hop_limit; __u8 traffic_class; __u8 gid[16]; - __u32 flow_label; + __be32 flow_label; }; /** diff --git a/drivers/infiniband/include/ib_user_verbs.h b/drivers/infiniband/include/ib_user_verbs.h index 7c613706af72..35857857aa3e 100644 --- a/drivers/infiniband/include/ib_user_verbs.h +++ b/drivers/infiniband/include/ib_user_verbs.h @@ -143,8 +143,8 @@ struct ib_uverbs_query_device { struct ib_uverbs_query_device_resp { __u64 fw_ver; - __u64 node_guid; - __u64 sys_image_guid; + __be64 node_guid; + __be64 sys_image_guid; __u64 max_mr_size; __u64 page_size_cap; __u32 vendor_id; diff --git a/drivers/infiniband/include/ib_verbs.h b/drivers/infiniband/include/ib_verbs.h index 8d5ea9568337..042a7d11fbcc 100644 --- a/drivers/infiniband/include/ib_verbs.h +++ b/drivers/infiniband/include/ib_verbs.h @@ -51,8 +51,8 @@ union ib_gid { u8 raw[16]; struct { - u64 subnet_prefix; - u64 interface_id; + __be64 subnet_prefix; + __be64 interface_id; } global; }; @@ -88,8 +88,8 @@ enum ib_atomic_cap { struct ib_device_attr { u64 fw_ver; - u64 node_guid; - u64 sys_image_guid; + __be64 node_guid; + __be64 sys_image_guid; u64 max_mr_size; u64 page_size_cap; u32 vendor_id; @@ -291,8 +291,8 @@ struct ib_global_route { }; struct ib_grh { - u32 version_tclass_flow; - u16 paylen; + __be32 version_tclass_flow; + __be16 paylen; u8 next_hdr; u8 hop_limit; union ib_gid sgid; @@ -303,6 +303,8 @@ enum { IB_MULTICAST_QPN = 0xffffff }; +#define IB_LID_PERMISSIVE __constant_htons(0xFFFF) + enum ib_ah_flags { IB_AH_GRH = 1 }; diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index b91d3ef01b92..e23041c7be8f 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -90,8 +90,8 @@ enum { /* structs */ struct ipoib_header { - u16 proto; - u16 reserved; + __be16 proto; + u16 reserved; }; struct ipoib_pseudoheader { diff --git a/drivers/infiniband/ulp/ipoib/ipoib_fs.c b/drivers/infiniband/ulp/ipoib/ipoib_fs.c index a84e5fe0f193..38b150f775e7 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_fs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_fs.c @@ -97,7 +97,7 @@ static int ipoib_mcg_seq_show(struct seq_file *file, void *iter_ptr) for (n = 0, i = 0; i < sizeof mgid / 2; ++i) { n += sprintf(gid_buf + n, "%x", - be16_to_cpu(((u16 *)mgid.raw)[i])); + be16_to_cpu(((__be16 *) mgid.raw)[i])); if (i < sizeof mgid / 2 - 1) gid_buf[n++] = ':'; } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index d4300e4a36d8..7f349693b40a 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -609,8 +609,8 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev) ipoib_warn(priv, "Unicast, no %s: type %04x, QPN %06x " IPOIB_GID_FMT "\n", skb->dst ? "neigh" : "dst", - be16_to_cpup((u16 *) skb->data), - be32_to_cpup((u32 *) phdr->hwaddr), + be16_to_cpup((__be16 *) skb->data), + be32_to_cpup((__be32 *) phdr->hwaddr), IPOIB_GID_ARG(*(union ib_gid *) (phdr->hwaddr + 4))); dev_kfree_skb_any(skb); ++priv->stats.tx_dropped; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index e03b070d5222..aca7aea18a69 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -359,7 +359,7 @@ static int ipoib_mcast_sendonly_join(struct ipoib_mcast *mcast) rec.mgid = mcast->mcmember.mgid; rec.port_gid = priv->local_gid; - rec.pkey = be16_to_cpu(priv->pkey); + rec.pkey = cpu_to_be16(priv->pkey); ret = ib_sa_mcmember_rec_set(priv->ca, priv->port, &rec, IB_SA_MCMEMBER_REC_MGID | @@ -459,7 +459,7 @@ static void ipoib_mcast_join(struct net_device *dev, struct ipoib_mcast *mcast, rec.mgid = mcast->mcmember.mgid; rec.port_gid = priv->local_gid; - rec.pkey = be16_to_cpu(priv->pkey); + rec.pkey = cpu_to_be16(priv->pkey); comp_mask = IB_SA_MCMEMBER_REC_MGID | @@ -648,7 +648,7 @@ static int ipoib_mcast_leave(struct net_device *dev, struct ipoib_mcast *mcast) rec.mgid = mcast->mcmember.mgid; rec.port_gid = priv->local_gid; - rec.pkey = be16_to_cpu(priv->pkey); + rec.pkey = cpu_to_be16(priv->pkey); /* Remove ourselves from the multicast group */ ret = ipoib_mcast_detach(dev, be16_to_cpu(mcast->mcmember.mlid), -- cgit v1.2.1 From 2e8b981c5d5c6fe5479ad47c44e3e76ebb5408ef Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sat, 13 Aug 2005 21:19:38 -0700 Subject: [PATCH] IB/mthca: add HCA board ID to sysfs info Add support for reporting HCA board ID returned from QUERY_ADAPTER firmware command through sysfs. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_cmd.c | 32 +++++++ drivers/infiniband/hw/mthca/mthca_cmd.h | 9 +- drivers/infiniband/hw/mthca/mthca_dev.h | 5 ++ drivers/infiniband/hw/mthca/mthca_main.c | 122 +++++++++++++-------------- drivers/infiniband/hw/mthca/mthca_provider.c | 10 ++- 5 files changed, 109 insertions(+), 69 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index 1e60487ecd7f..e15c1e2deab4 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -1085,6 +1085,34 @@ out: return err; } +static void get_board_id(void *vsd, char *board_id) +{ + int i; + +#define VSD_OFFSET_SIG1 0x00 +#define VSD_OFFSET_SIG2 0xde +#define VSD_OFFSET_MLX_BOARD_ID 0xd0 +#define VSD_OFFSET_TS_BOARD_ID 0x20 + +#define VSD_SIGNATURE_TOPSPIN 0x5ad + + memset(board_id, 0, MTHCA_BOARD_ID_LEN); + + if (be16_to_cpup(vsd + VSD_OFFSET_SIG1) == VSD_SIGNATURE_TOPSPIN && + be16_to_cpup(vsd + VSD_OFFSET_SIG2) == VSD_SIGNATURE_TOPSPIN) { + strlcpy(board_id, vsd + VSD_OFFSET_TS_BOARD_ID, MTHCA_BOARD_ID_LEN); + } else { + /* + * The board ID is a string but the firmware byte + * swaps each 4-byte word before passing it back to + * us. Therefore we need to swab it before printing. + */ + for (i = 0; i < 4; ++i) + ((u32 *) board_id)[i] = + swab32(*(u32 *) (vsd + VSD_OFFSET_MLX_BOARD_ID + i * 4)); + } +} + int mthca_QUERY_ADAPTER(struct mthca_dev *dev, struct mthca_adapter *adapter, u8 *status) { @@ -1097,6 +1125,7 @@ int mthca_QUERY_ADAPTER(struct mthca_dev *dev, #define QUERY_ADAPTER_DEVICE_ID_OFFSET 0x04 #define QUERY_ADAPTER_REVISION_ID_OFFSET 0x08 #define QUERY_ADAPTER_INTA_PIN_OFFSET 0x10 +#define QUERY_ADAPTER_VSD_OFFSET 0x20 mailbox = mthca_alloc_mailbox(dev, GFP_KERNEL); if (IS_ERR(mailbox)) @@ -1114,6 +1143,9 @@ int mthca_QUERY_ADAPTER(struct mthca_dev *dev, MTHCA_GET(adapter->revision_id, outbox, QUERY_ADAPTER_REVISION_ID_OFFSET); MTHCA_GET(adapter->inta_pin, outbox, QUERY_ADAPTER_INTA_PIN_OFFSET); + get_board_id(outbox + QUERY_ADAPTER_VSD_OFFSET / 4, + adapter->board_id); + out: mthca_free_mailbox(dev, mailbox); return err; diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.h b/drivers/infiniband/hw/mthca/mthca_cmd.h index 75a629639445..4e0062778ff9 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.h +++ b/drivers/infiniband/hw/mthca/mthca_cmd.h @@ -184,10 +184,11 @@ struct mthca_dev_lim { }; struct mthca_adapter { - u32 vendor_id; - u32 device_id; - u32 revision_id; - u8 inta_pin; + u32 vendor_id; + u32 device_id; + u32 revision_id; + char board_id[MTHCA_BOARD_ID_LEN]; + u8 inta_pin; }; struct mthca_init_hca_param { diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index 3519ca4e086c..c8f67c034183 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -68,6 +68,10 @@ enum { MTHCA_MAX_PORTS = 2 }; +enum { + MTHCA_BOARD_ID_LEN = 64 +}; + enum { MTHCA_EQ_CONTEXT_SIZE = 0x40, MTHCA_CQ_CONTEXT_SIZE = 0x40, @@ -248,6 +252,7 @@ struct mthca_dev { unsigned long device_cap_flags; u32 rev_id; + char board_id[MTHCA_BOARD_ID_LEN]; /* firmware info */ u64 fw_ver; diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 2d539403bdac..2f039680239c 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -213,7 +213,6 @@ static int __devinit mthca_init_tavor(struct mthca_dev *mdev) struct mthca_dev_lim dev_lim; struct mthca_profile profile; struct mthca_init_hca_param init_hca; - struct mthca_adapter adapter; err = mthca_SYS_EN(mdev, &status); if (err) { @@ -271,26 +270,8 @@ static int __devinit mthca_init_tavor(struct mthca_dev *mdev) goto err_disable; } - err = mthca_QUERY_ADAPTER(mdev, &adapter, &status); - if (err) { - mthca_err(mdev, "QUERY_ADAPTER command failed, aborting.\n"); - goto err_close; - } - if (status) { - mthca_err(mdev, "QUERY_ADAPTER returned status 0x%02x, " - "aborting.\n", status); - err = -EINVAL; - goto err_close; - } - - mdev->eq_table.inta_pin = adapter.inta_pin; - mdev->rev_id = adapter.revision_id; - return 0; -err_close: - mthca_CLOSE_HCA(mdev, 0, &status); - err_disable: mthca_SYS_DIS(mdev, &status); @@ -507,7 +488,6 @@ static int __devinit mthca_init_arbel(struct mthca_dev *mdev) struct mthca_dev_lim dev_lim; struct mthca_profile profile; struct mthca_init_hca_param init_hca; - struct mthca_adapter adapter; u64 icm_size; u8 status; int err; @@ -575,21 +555,6 @@ static int __devinit mthca_init_arbel(struct mthca_dev *mdev) goto err_free_icm; } - err = mthca_QUERY_ADAPTER(mdev, &adapter, &status); - if (err) { - mthca_err(mdev, "QUERY_ADAPTER command failed, aborting.\n"); - goto err_free_icm; - } - if (status) { - mthca_err(mdev, "QUERY_ADAPTER returned status 0x%02x, " - "aborting.\n", status); - err = -EINVAL; - goto err_free_icm; - } - - mdev->eq_table.inta_pin = adapter.inta_pin; - mdev->rev_id = adapter.revision_id; - return 0; err_free_icm: @@ -615,12 +580,68 @@ err_disable: return err; } +static void mthca_close_hca(struct mthca_dev *mdev) +{ + u8 status; + + mthca_CLOSE_HCA(mdev, 0, &status); + + if (mthca_is_memfree(mdev)) { + mthca_free_icm_table(mdev, mdev->cq_table.table); + mthca_free_icm_table(mdev, mdev->qp_table.rdb_table); + mthca_free_icm_table(mdev, mdev->qp_table.eqp_table); + mthca_free_icm_table(mdev, mdev->qp_table.qp_table); + mthca_free_icm_table(mdev, mdev->mr_table.mpt_table); + mthca_free_icm_table(mdev, mdev->mr_table.mtt_table); + mthca_unmap_eq_icm(mdev); + + mthca_UNMAP_ICM_AUX(mdev, &status); + mthca_free_icm(mdev, mdev->fw.arbel.aux_icm); + + mthca_UNMAP_FA(mdev, &status); + mthca_free_icm(mdev, mdev->fw.arbel.fw_icm); + + if (!(mdev->mthca_flags & MTHCA_FLAG_NO_LAM)) + mthca_DISABLE_LAM(mdev, &status); + } else + mthca_SYS_DIS(mdev, &status); +} + static int __devinit mthca_init_hca(struct mthca_dev *mdev) { + u8 status; + int err; + struct mthca_adapter adapter; + if (mthca_is_memfree(mdev)) - return mthca_init_arbel(mdev); + err = mthca_init_arbel(mdev); else - return mthca_init_tavor(mdev); + err = mthca_init_tavor(mdev); + + if (err) + return err; + + err = mthca_QUERY_ADAPTER(mdev, &adapter, &status); + if (err) { + mthca_err(mdev, "QUERY_ADAPTER command failed, aborting.\n"); + goto err_close; + } + if (status) { + mthca_err(mdev, "QUERY_ADAPTER returned status 0x%02x, " + "aborting.\n", status); + err = -EINVAL; + goto err_close; + } + + mdev->eq_table.inta_pin = adapter.inta_pin; + mdev->rev_id = adapter.revision_id; + memcpy(mdev->board_id, adapter.board_id, sizeof mdev->board_id); + + return 0; + +err_close: + mthca_close_hca(mdev); + return err; } static int __devinit mthca_setup_hca(struct mthca_dev *dev) @@ -845,33 +866,6 @@ static int __devinit mthca_enable_msi_x(struct mthca_dev *mdev) return 0; } -static void mthca_close_hca(struct mthca_dev *mdev) -{ - u8 status; - - mthca_CLOSE_HCA(mdev, 0, &status); - - if (mthca_is_memfree(mdev)) { - mthca_free_icm_table(mdev, mdev->cq_table.table); - mthca_free_icm_table(mdev, mdev->qp_table.rdb_table); - mthca_free_icm_table(mdev, mdev->qp_table.eqp_table); - mthca_free_icm_table(mdev, mdev->qp_table.qp_table); - mthca_free_icm_table(mdev, mdev->mr_table.mpt_table); - mthca_free_icm_table(mdev, mdev->mr_table.mtt_table); - mthca_unmap_eq_icm(mdev); - - mthca_UNMAP_ICM_AUX(mdev, &status); - mthca_free_icm(mdev, mdev->fw.arbel.aux_icm); - - mthca_UNMAP_FA(mdev, &status); - mthca_free_icm(mdev, mdev->fw.arbel.fw_icm); - - if (!(mdev->mthca_flags & MTHCA_FLAG_NO_LAM)) - mthca_DISABLE_LAM(mdev, &status); - } else - mthca_SYS_DIS(mdev, &status); -} - /* Types of supported HCA */ enum { TAVOR, /* MT23108 */ diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index e2db5e001869..f5e135f1dc59 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -958,14 +958,22 @@ static ssize_t show_hca(struct class_device *cdev, char *buf) } } +static ssize_t show_board(struct class_device *cdev, char *buf) +{ + struct mthca_dev *dev = container_of(cdev, struct mthca_dev, ib_dev.class_dev); + return sprintf(buf, "%.*s\n", MTHCA_BOARD_ID_LEN, dev->board_id); +} + static CLASS_DEVICE_ATTR(hw_rev, S_IRUGO, show_rev, NULL); static CLASS_DEVICE_ATTR(fw_ver, S_IRUGO, show_fw_ver, NULL); static CLASS_DEVICE_ATTR(hca_type, S_IRUGO, show_hca, NULL); +static CLASS_DEVICE_ATTR(board_id, S_IRUGO, show_board, NULL); static struct class_device_attribute *mthca_class_attributes[] = { &class_device_attr_hw_rev, &class_device_attr_fw_ver, - &class_device_attr_hca_type + &class_device_attr_hca_type, + &class_device_attr_board_id }; int mthca_register_device(struct mthca_dev *dev) -- cgit v1.2.1 From ffbf4c34f1916fa1e0554269c94c57da4a21a348 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 15 Aug 2005 07:35:16 -0700 Subject: [PATCH] IB: unmap FMRs when destroying FMR pool Make sure that all FMRs are unmapped before we deallocate them so that we don't leak references to our protection domain when destroying an FMR pool. (Bug reported by Guy German ) Signed-off-by: Roland Dreier --- drivers/infiniband/core/fmr_pool.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/core/fmr_pool.c b/drivers/infiniband/core/fmr_pool.c index 7763b31abba7..1f7374927f38 100644 --- a/drivers/infiniband/core/fmr_pool.c +++ b/drivers/infiniband/core/fmr_pool.c @@ -334,6 +334,7 @@ void ib_destroy_fmr_pool(struct ib_fmr_pool *pool) { struct ib_pool_fmr *fmr; struct ib_pool_fmr *tmp; + LIST_HEAD(fmr_list); int i; kthread_stop(pool->thread); @@ -341,6 +342,11 @@ void ib_destroy_fmr_pool(struct ib_fmr_pool *pool) i = 0; list_for_each_entry_safe(fmr, tmp, &pool->free_list, list) { + if (fmr->remap_count) { + INIT_LIST_HEAD(&fmr_list); + list_add_tail(&fmr->fmr->list, &fmr_list); + ib_unmap_fmr(&fmr_list); + } ib_dealloc_fmr(fmr->fmr); list_del(&fmr->list); kfree(fmr); -- cgit v1.2.1 From 7f9f2dba729cee6ea10596ccb07447d467705b08 Mon Sep 17 00:00:00 2001 From: Guy German Date: Mon, 15 Aug 2005 07:38:50 -0700 Subject: [PATCH] IB/mthca: use generic function instead of arbel_ version in mthca_free_region() Use the generic key_to_hw_index() function instead of the Arbel-specific version in mthca_free_region(). Signed-off-by: Guy German Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_mr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c index 0965e66061b7..1f97a44477f5 100644 --- a/drivers/infiniband/hw/mthca/mthca_mr.c +++ b/drivers/infiniband/hw/mthca/mthca_mr.c @@ -459,7 +459,7 @@ int mthca_mr_alloc_phys(struct mthca_dev *dev, u32 pd, static void mthca_free_region(struct mthca_dev *dev, u32 lkey) { mthca_table_put(dev, dev->mr_table.mpt_table, - arbel_key_to_hw_index(lkey)); + key_to_hw_index(dev, lkey)); mthca_free(&dev->mr_table.mpt_alloc, key_to_hw_index(dev, lkey)); } -- cgit v1.2.1 From 5dd2ce1200f4b12687d74de89a527f99e16c344e Mon Sep 17 00:00:00 2001 From: Hal Rosenstock Date: Mon, 15 Aug 2005 14:16:36 -0700 Subject: [PATCH] IB: Fix ib_mad_thread_completion_handler declaration Change ib_mad_thread_completion_handler to conform to ib_comp_handler declaration. Signed-off-by: Hal Rosenstock Signed-off-by: Roland Dreier --- drivers/infiniband/core/mad.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index 214493cb3a0b..a4a4d9c1eef3 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -2296,7 +2296,7 @@ static void timeout_sends(void *data) spin_unlock_irqrestore(&mad_agent_priv->lock, flags); } -static void ib_mad_thread_completion_handler(struct ib_cq *cq) +static void ib_mad_thread_completion_handler(struct ib_cq *cq, void *arg) { struct ib_mad_port_private *port_priv = cq->cq_context; @@ -2576,8 +2576,7 @@ static int ib_mad_port_open(struct ib_device *device, cq_size = (IB_MAD_QP_SEND_SIZE + IB_MAD_QP_RECV_SIZE) * 2; port_priv->cq = ib_create_cq(port_priv->device, - (ib_comp_handler) - ib_mad_thread_completion_handler, + ib_mad_thread_completion_handler, NULL, port_priv, cq_size); if (IS_ERR(port_priv->cq)) { printk(KERN_ERR PFX "Couldn't create ib_mad CQ\n"); -- cgit v1.2.1 From 2aeba9a03b0d249fc710b9939fc089ce53d8cd30 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Mon, 15 Aug 2005 14:29:03 -0700 Subject: [PATCH] IB: Remove unnecessary includes of changing CONFIG_LOCALVERSION rebuilds too much, for no appearent reason. Remove unneeded includes of . Signed-off-by: Olaf Hering Signed-off-by: Roland Dreier --- drivers/infiniband/core/cache.c | 1 - drivers/infiniband/hw/mthca/mthca_main.c | 1 - drivers/infiniband/ulp/ipoib/ipoib_main.c | 1 - drivers/infiniband/ulp/ipoib/ipoib_vlan.c | 1 - 4 files changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/cache.c b/drivers/infiniband/core/cache.c index 3a129db5ec27..9376e53f50f2 100644 --- a/drivers/infiniband/core/cache.c +++ b/drivers/infiniband/core/cache.c @@ -35,7 +35,6 @@ * $Id: cache.c 1349 2004-12-16 21:09:43Z roland $ */ -#include #include #include #include diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 2f039680239c..279f158aa12b 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -35,7 +35,6 @@ */ #include -#include #include #include #include diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 7f349693b40a..968b27947f8d 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -36,7 +36,6 @@ #include "ipoib.h" -#include #include #include diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c index 94b8ea812fef..332d730e60c2 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c @@ -32,7 +32,6 @@ * $Id: ipoib_vlan.c 1349 2004-12-16 21:09:43Z roland $ */ -#include #include #include -- cgit v1.2.1 From da6561c285a6e28a075b97fd5a1560a2b0ce843e Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 17 Aug 2005 07:39:10 -0700 Subject: [PATCH] IB/mthca: Use correct port width capability value When we call the INIT_IB firmware command to bring up a port, use the actual port width capability returned by the QUERY_DEV_LIM command instead of always trying to enable both 1X and 4X. This fixes breakage seen when the firmware is build to allow 4X only. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_cmd.c | 7 ++----- drivers/infiniband/hw/mthca/mthca_cmd.h | 3 +-- drivers/infiniband/hw/mthca/mthca_dev.h | 1 + drivers/infiniband/hw/mthca/mthca_main.c | 1 + drivers/infiniband/hw/mthca/mthca_qp.c | 11 +++++------ 5 files changed, 10 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index e15c1e2deab4..c258c1b7022e 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -1282,10 +1282,8 @@ int mthca_INIT_IB(struct mthca_dev *dev, #define INIT_IB_FLAG_SIG (1 << 18) #define INIT_IB_FLAG_NG (1 << 17) #define INIT_IB_FLAG_G0 (1 << 16) -#define INIT_IB_FLAG_1X (1 << 8) -#define INIT_IB_FLAG_4X (1 << 9) -#define INIT_IB_FLAG_12X (1 << 11) #define INIT_IB_VL_SHIFT 4 +#define INIT_IB_PORT_WIDTH_SHIFT 8 #define INIT_IB_MTU_SHIFT 12 #define INIT_IB_MAX_GID_OFFSET 0x06 #define INIT_IB_MAX_PKEY_OFFSET 0x0a @@ -1301,12 +1299,11 @@ int mthca_INIT_IB(struct mthca_dev *dev, memset(inbox, 0, INIT_IB_IN_SIZE); flags = 0; - flags |= param->enable_1x ? INIT_IB_FLAG_1X : 0; - flags |= param->enable_4x ? INIT_IB_FLAG_4X : 0; flags |= param->set_guid0 ? INIT_IB_FLAG_G0 : 0; flags |= param->set_node_guid ? INIT_IB_FLAG_NG : 0; flags |= param->set_si_guid ? INIT_IB_FLAG_SIG : 0; flags |= param->vl_cap << INIT_IB_VL_SHIFT; + flags |= param->port_width << INIT_IB_PORT_WIDTH_SHIFT; flags |= param->mtu_cap << INIT_IB_MTU_SHIFT; MTHCA_PUT(inbox, flags, INIT_IB_FLAGS_OFFSET); diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.h b/drivers/infiniband/hw/mthca/mthca_cmd.h index 4e0062778ff9..11f02a61432a 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.h +++ b/drivers/infiniband/hw/mthca/mthca_cmd.h @@ -220,8 +220,7 @@ struct mthca_init_hca_param { }; struct mthca_init_ib_param { - int enable_1x; - int enable_4x; + int port_width; int vl_cap; int mtu_cap; u16 gid_cap; diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index c8f67c034183..0f90a173ecee 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -148,6 +148,7 @@ struct mthca_limits { int reserved_mcgs; int num_pds; int reserved_pds; + u8 port_width_cap; }; struct mthca_alloc { diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 279f158aa12b..16c5d4a805f0 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -171,6 +171,7 @@ static int __devinit mthca_dev_lim(struct mthca_dev *mdev, struct mthca_dev_lim mdev->limits.reserved_mrws = dev_lim->reserved_mrws; mdev->limits.reserved_uars = dev_lim->reserved_uars; mdev->limits.reserved_pds = dev_lim->reserved_pds; + mdev->limits.port_width_cap = dev_lim->max_port_width; /* IB_DEVICE_RESIZE_MAX_WR not supported by driver. May be doable since hardware supports it for SRQ. diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 8fbb4f1f5398..b7e3d2342799 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -575,12 +575,11 @@ static void init_port(struct mthca_dev *dev, int port) memset(¶m, 0, sizeof param); - param.enable_1x = 1; - param.enable_4x = 1; - param.vl_cap = dev->limits.vl_cap; - param.mtu_cap = dev->limits.mtu_cap; - param.gid_cap = dev->limits.gid_table_len; - param.pkey_cap = dev->limits.pkey_table_len; + param.port_width = dev->limits.port_width_cap; + param.vl_cap = dev->limits.vl_cap; + param.mtu_cap = dev->limits.mtu_cap; + param.gid_cap = dev->limits.gid_table_len; + param.pkey_cap = dev->limits.pkey_table_len; err = mthca_INIT_IB(dev, ¶m, port, &status); if (err) -- cgit v1.2.1 From d1887ec2125988adccbd8bf0de638c41440bf80e Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 18 Aug 2005 12:14:11 -0700 Subject: [PATCH] IB/mthca: Report correct max_msg_sz Set the max_msg_sz port property correctly in mthca's port_query function. Also zero out the attr struct so that we don't leave any other members uninitialized. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_provider.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index f5e135f1dc59..08a7340e19ff 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -120,6 +120,8 @@ static int mthca_query_port(struct ib_device *ibdev, if (!in_mad || !out_mad) goto out; + memset(props, 0, sizeof *props); + memset(in_mad, 0, sizeof *in_mad); in_mad->base_version = 1; in_mad->mgmt_class = IB_MGMT_CLASS_SUBN_LID_ROUTED; @@ -146,6 +148,7 @@ static int mthca_query_port(struct ib_device *ibdev, props->phys_state = out_mad->data[33] >> 4; props->port_cap_flags = be32_to_cpup((__be32 *) (out_mad->data + 20)); props->gid_tbl_len = to_mdev(ibdev)->limits.gid_table_len; + props->max_msg_sz = 0x80000000; props->pkey_tbl_len = to_mdev(ibdev)->limits.pkey_table_len; props->qkey_viol_cntr = be16_to_cpup((__be16 *) (out_mad->data + 48)); props->active_width = out_mad->data[31] & 0xf; -- cgit v1.2.1 From d41fcc6705eddd04f7218c985b6da35435ed73cc Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 18 Aug 2005 12:23:08 -0700 Subject: [PATCH] IB: Add SRQ support to midlayer Make the required core API additions and changes for shared receive queues (SRQs). Signed-off-by: Roland Dreier --- drivers/infiniband/core/verbs.c | 60 ++++++++++++++++++++ drivers/infiniband/include/ib_verbs.h | 103 ++++++++++++++++++++++++++++++++-- 2 files changed, 158 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c index c301a2c41f34..c035510c5a36 100644 --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -154,6 +154,66 @@ int ib_destroy_ah(struct ib_ah *ah) } EXPORT_SYMBOL(ib_destroy_ah); +/* Shared receive queues */ + +struct ib_srq *ib_create_srq(struct ib_pd *pd, + struct ib_srq_init_attr *srq_init_attr) +{ + struct ib_srq *srq; + + if (!pd->device->create_srq) + return ERR_PTR(-ENOSYS); + + srq = pd->device->create_srq(pd, srq_init_attr, NULL); + + if (!IS_ERR(srq)) { + srq->device = pd->device; + srq->pd = pd; + srq->uobject = NULL; + srq->event_handler = srq_init_attr->event_handler; + srq->srq_context = srq_init_attr->srq_context; + atomic_inc(&pd->usecnt); + atomic_set(&srq->usecnt, 0); + } + + return srq; +} +EXPORT_SYMBOL(ib_create_srq); + +int ib_modify_srq(struct ib_srq *srq, + struct ib_srq_attr *srq_attr, + enum ib_srq_attr_mask srq_attr_mask) +{ + return srq->device->modify_srq(srq, srq_attr, srq_attr_mask); +} +EXPORT_SYMBOL(ib_modify_srq); + +int ib_query_srq(struct ib_srq *srq, + struct ib_srq_attr *srq_attr) +{ + return srq->device->query_srq ? + srq->device->query_srq(srq, srq_attr) : -ENOSYS; +} +EXPORT_SYMBOL(ib_query_srq); + +int ib_destroy_srq(struct ib_srq *srq) +{ + struct ib_pd *pd; + int ret; + + if (atomic_read(&srq->usecnt)) + return -EBUSY; + + pd = srq->pd; + + ret = srq->device->destroy_srq(srq); + if (!ret) + atomic_dec(&pd->usecnt); + + return ret; +} +EXPORT_SYMBOL(ib_destroy_srq); + /* Queue pairs */ struct ib_qp *ib_create_qp(struct ib_pd *pd, diff --git a/drivers/infiniband/include/ib_verbs.h b/drivers/infiniband/include/ib_verbs.h index 042a7d11fbcc..e16cf94870f2 100644 --- a/drivers/infiniband/include/ib_verbs.h +++ b/drivers/infiniband/include/ib_verbs.h @@ -256,7 +256,10 @@ enum ib_event_type { IB_EVENT_PORT_ERR, IB_EVENT_LID_CHANGE, IB_EVENT_PKEY_CHANGE, - IB_EVENT_SM_CHANGE + IB_EVENT_SM_CHANGE, + IB_EVENT_SRQ_ERR, + IB_EVENT_SRQ_LIMIT_REACHED, + IB_EVENT_QP_LAST_WQE_REACHED }; struct ib_event { @@ -264,6 +267,7 @@ struct ib_event { union { struct ib_cq *cq; struct ib_qp *qp; + struct ib_srq *srq; u8 port_num; } element; enum ib_event_type event; @@ -386,6 +390,23 @@ enum ib_cq_notify { IB_CQ_NEXT_COMP }; +enum ib_srq_attr_mask { + IB_SRQ_MAX_WR = 1 << 0, + IB_SRQ_LIMIT = 1 << 1, +}; + +struct ib_srq_attr { + u32 max_wr; + u32 max_sge; + u32 srq_limit; +}; + +struct ib_srq_init_attr { + void (*event_handler)(struct ib_event *, void *); + void *srq_context; + struct ib_srq_attr attr; +}; + struct ib_qp_cap { u32 max_send_wr; u32 max_recv_wr; @@ -713,10 +734,11 @@ struct ib_cq { }; struct ib_srq { - struct ib_device *device; - struct ib_uobject *uobject; - struct ib_pd *pd; - void *srq_context; + struct ib_device *device; + struct ib_pd *pd; + struct ib_uobject *uobject; + void (*event_handler)(struct ib_event *, void *); + void *srq_context; atomic_t usecnt; }; @@ -830,6 +852,18 @@ struct ib_device { int (*query_ah)(struct ib_ah *ah, struct ib_ah_attr *ah_attr); int (*destroy_ah)(struct ib_ah *ah); + struct ib_srq * (*create_srq)(struct ib_pd *pd, + struct ib_srq_init_attr *srq_init_attr, + struct ib_udata *udata); + int (*modify_srq)(struct ib_srq *srq, + struct ib_srq_attr *srq_attr, + enum ib_srq_attr_mask srq_attr_mask); + int (*query_srq)(struct ib_srq *srq, + struct ib_srq_attr *srq_attr); + int (*destroy_srq)(struct ib_srq *srq); + int (*post_srq_recv)(struct ib_srq *srq, + struct ib_recv_wr *recv_wr, + struct ib_recv_wr **bad_recv_wr); struct ib_qp * (*create_qp)(struct ib_pd *pd, struct ib_qp_init_attr *qp_init_attr, struct ib_udata *udata); @@ -1041,6 +1075,65 @@ int ib_query_ah(struct ib_ah *ah, struct ib_ah_attr *ah_attr); */ int ib_destroy_ah(struct ib_ah *ah); +/** + * ib_create_srq - Creates a SRQ associated with the specified protection + * domain. + * @pd: The protection domain associated with the SRQ. + * @srq_init_attr: A list of initial attributes required to create the SRQ. + * + * srq_attr->max_wr and srq_attr->max_sge are read the determine the + * requested size of the SRQ, and set to the actual values allocated + * on return. If ib_create_srq() succeeds, then max_wr and max_sge + * will always be at least as large as the requested values. + */ +struct ib_srq *ib_create_srq(struct ib_pd *pd, + struct ib_srq_init_attr *srq_init_attr); + +/** + * ib_modify_srq - Modifies the attributes for the specified SRQ. + * @srq: The SRQ to modify. + * @srq_attr: On input, specifies the SRQ attributes to modify. On output, + * the current values of selected SRQ attributes are returned. + * @srq_attr_mask: A bit-mask used to specify which attributes of the SRQ + * are being modified. + * + * The mask may contain IB_SRQ_MAX_WR to resize the SRQ and/or + * IB_SRQ_LIMIT to set the SRQ's limit and request notification when + * the number of receives queued drops below the limit. + */ +int ib_modify_srq(struct ib_srq *srq, + struct ib_srq_attr *srq_attr, + enum ib_srq_attr_mask srq_attr_mask); + +/** + * ib_query_srq - Returns the attribute list and current values for the + * specified SRQ. + * @srq: The SRQ to query. + * @srq_attr: The attributes of the specified SRQ. + */ +int ib_query_srq(struct ib_srq *srq, + struct ib_srq_attr *srq_attr); + +/** + * ib_destroy_srq - Destroys the specified SRQ. + * @srq: The SRQ to destroy. + */ +int ib_destroy_srq(struct ib_srq *srq); + +/** + * ib_post_srq_recv - Posts a list of work requests to the specified SRQ. + * @srq: The SRQ to post the work request on. + * @recv_wr: A list of work requests to post on the receive queue. + * @bad_recv_wr: On an immediate failure, this parameter will reference + * the work request that failed to be posted on the QP. + */ +static inline int ib_post_srq_recv(struct ib_srq *srq, + struct ib_recv_wr *recv_wr, + struct ib_recv_wr **bad_recv_wr) +{ + return srq->device->post_srq_recv(srq, recv_wr, bad_recv_wr); +} + /** * ib_create_qp - Creates a QP associated with the specified protection * domain. -- cgit v1.2.1 From f520ba5aa48e2891c3fb3e364eeaaab4212c7c45 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 18 Aug 2005 12:24:13 -0700 Subject: [PATCH] IB: userspace SRQ support Add SRQ support to userspace verbs module. This adds several commands and associated structures, but it's OK to do this without bumping the ABI version because the commands are added at the end of the list so they don't change the existing numbering. There are two cases to worry about: 1. New kernel, old userspace. This is OK because old userspace simply won't try to use the new SRQ commands. None of the old commands are changed. 2. Old kernel, new userspace. This works perfectly as long as userspace doesn't try to use SRQ commands. If userspace tries to use SRQ commands, it will get EINVAL, which is perfectly reasonable: the kernel doesn't support SRQs, so we couldn't do any better. Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs.h | 5 + drivers/infiniband/core/uverbs_cmd.c | 182 ++++++++++++++++++++++++++++- drivers/infiniband/core/uverbs_main.c | 20 +++- drivers/infiniband/include/ib_user_verbs.h | 35 +++++- 4 files changed, 238 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h index 3e158f5acfc6..db161810c0c0 100644 --- a/drivers/infiniband/core/uverbs.h +++ b/drivers/infiniband/core/uverbs.h @@ -99,10 +99,12 @@ extern struct idr ib_uverbs_mw_idr; extern struct idr ib_uverbs_ah_idr; extern struct idr ib_uverbs_cq_idr; extern struct idr ib_uverbs_qp_idr; +extern struct idr ib_uverbs_srq_idr; void ib_uverbs_comp_handler(struct ib_cq *cq, void *cq_context); void ib_uverbs_cq_event_handler(struct ib_event *event, void *context_ptr); void ib_uverbs_qp_event_handler(struct ib_event *event, void *context_ptr); +void ib_uverbs_srq_event_handler(struct ib_event *event, void *context_ptr); int ib_umem_get(struct ib_device *dev, struct ib_umem *mem, void *addr, size_t size, int write); @@ -131,5 +133,8 @@ IB_UVERBS_DECLARE_CMD(modify_qp); IB_UVERBS_DECLARE_CMD(destroy_qp); IB_UVERBS_DECLARE_CMD(attach_mcast); IB_UVERBS_DECLARE_CMD(detach_mcast); +IB_UVERBS_DECLARE_CMD(create_srq); +IB_UVERBS_DECLARE_CMD(modify_srq); +IB_UVERBS_DECLARE_CMD(destroy_srq); #endif /* UVERBS_H */ diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index 5f2bbcda4c73..ebccf9f38af9 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -724,6 +724,7 @@ ssize_t ib_uverbs_create_qp(struct ib_uverbs_file *file, struct ib_uobject *uobj; struct ib_pd *pd; struct ib_cq *scq, *rcq; + struct ib_srq *srq; struct ib_qp *qp; struct ib_qp_init_attr attr; int ret; @@ -747,10 +748,12 @@ ssize_t ib_uverbs_create_qp(struct ib_uverbs_file *file, pd = idr_find(&ib_uverbs_pd_idr, cmd.pd_handle); scq = idr_find(&ib_uverbs_cq_idr, cmd.send_cq_handle); rcq = idr_find(&ib_uverbs_cq_idr, cmd.recv_cq_handle); + srq = cmd.is_srq ? idr_find(&ib_uverbs_srq_idr, cmd.srq_handle) : NULL; if (!pd || pd->uobject->context != file->ucontext || !scq || scq->uobject->context != file->ucontext || - !rcq || rcq->uobject->context != file->ucontext) { + !rcq || rcq->uobject->context != file->ucontext || + (cmd.is_srq && (!srq || srq->uobject->context != file->ucontext))) { ret = -EINVAL; goto err_up; } @@ -759,7 +762,7 @@ ssize_t ib_uverbs_create_qp(struct ib_uverbs_file *file, attr.qp_context = file; attr.send_cq = scq; attr.recv_cq = rcq; - attr.srq = NULL; + attr.srq = srq; attr.sq_sig_type = cmd.sq_sig_all ? IB_SIGNAL_ALL_WR : IB_SIGNAL_REQ_WR; attr.qp_type = cmd.qp_type; @@ -1004,3 +1007,178 @@ ssize_t ib_uverbs_detach_mcast(struct ib_uverbs_file *file, return ret ? ret : in_len; } + +ssize_t ib_uverbs_create_srq(struct ib_uverbs_file *file, + const char __user *buf, int in_len, + int out_len) +{ + struct ib_uverbs_create_srq cmd; + struct ib_uverbs_create_srq_resp resp; + struct ib_udata udata; + struct ib_uobject *uobj; + struct ib_pd *pd; + struct ib_srq *srq; + struct ib_srq_init_attr attr; + int ret; + + if (out_len < sizeof resp) + return -ENOSPC; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + INIT_UDATA(&udata, buf + sizeof cmd, + (unsigned long) cmd.response + sizeof resp, + in_len - sizeof cmd, out_len - sizeof resp); + + uobj = kmalloc(sizeof *uobj, GFP_KERNEL); + if (!uobj) + return -ENOMEM; + + down(&ib_uverbs_idr_mutex); + + pd = idr_find(&ib_uverbs_pd_idr, cmd.pd_handle); + + if (!pd || pd->uobject->context != file->ucontext) { + ret = -EINVAL; + goto err_up; + } + + attr.event_handler = ib_uverbs_srq_event_handler; + attr.srq_context = file; + attr.attr.max_wr = cmd.max_wr; + attr.attr.max_sge = cmd.max_sge; + attr.attr.srq_limit = cmd.srq_limit; + + uobj->user_handle = cmd.user_handle; + uobj->context = file->ucontext; + + srq = pd->device->create_srq(pd, &attr, &udata); + if (IS_ERR(srq)) { + ret = PTR_ERR(srq); + goto err_up; + } + + srq->device = pd->device; + srq->pd = pd; + srq->uobject = uobj; + srq->event_handler = attr.event_handler; + srq->srq_context = attr.srq_context; + atomic_inc(&pd->usecnt); + atomic_set(&srq->usecnt, 0); + + memset(&resp, 0, sizeof resp); + +retry: + if (!idr_pre_get(&ib_uverbs_srq_idr, GFP_KERNEL)) { + ret = -ENOMEM; + goto err_destroy; + } + + ret = idr_get_new(&ib_uverbs_srq_idr, srq, &uobj->id); + + if (ret == -EAGAIN) + goto retry; + if (ret) + goto err_destroy; + + resp.srq_handle = uobj->id; + + spin_lock_irq(&file->ucontext->lock); + list_add_tail(&uobj->list, &file->ucontext->srq_list); + spin_unlock_irq(&file->ucontext->lock); + + if (copy_to_user((void __user *) (unsigned long) cmd.response, + &resp, sizeof resp)) { + ret = -EFAULT; + goto err_list; + } + + up(&ib_uverbs_idr_mutex); + + return in_len; + +err_list: + spin_lock_irq(&file->ucontext->lock); + list_del(&uobj->list); + spin_unlock_irq(&file->ucontext->lock); + +err_destroy: + ib_destroy_srq(srq); + +err_up: + up(&ib_uverbs_idr_mutex); + + kfree(uobj); + return ret; +} + +ssize_t ib_uverbs_modify_srq(struct ib_uverbs_file *file, + const char __user *buf, int in_len, + int out_len) +{ + struct ib_uverbs_modify_srq cmd; + struct ib_srq *srq; + struct ib_srq_attr attr; + int ret; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + down(&ib_uverbs_idr_mutex); + + srq = idr_find(&ib_uverbs_srq_idr, cmd.srq_handle); + if (!srq || srq->uobject->context != file->ucontext) { + ret = -EINVAL; + goto out; + } + + attr.max_wr = cmd.max_wr; + attr.max_sge = cmd.max_sge; + attr.srq_limit = cmd.srq_limit; + + ret = ib_modify_srq(srq, &attr, cmd.attr_mask); + +out: + up(&ib_uverbs_idr_mutex); + + return ret ? ret : in_len; +} + +ssize_t ib_uverbs_destroy_srq(struct ib_uverbs_file *file, + const char __user *buf, int in_len, + int out_len) +{ + struct ib_uverbs_destroy_srq cmd; + struct ib_srq *srq; + struct ib_uobject *uobj; + int ret = -EINVAL; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + down(&ib_uverbs_idr_mutex); + + srq = idr_find(&ib_uverbs_srq_idr, cmd.srq_handle); + if (!srq || srq->uobject->context != file->ucontext) + goto out; + + uobj = srq->uobject; + + ret = ib_destroy_srq(srq); + if (ret) + goto out; + + idr_remove(&ib_uverbs_srq_idr, cmd.srq_handle); + + spin_lock_irq(&file->ucontext->lock); + list_del(&uobj->list); + spin_unlock_irq(&file->ucontext->lock); + + kfree(uobj); + +out: + up(&ib_uverbs_idr_mutex); + + return ret ? ret : in_len; +} diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index fd8e96359304..09caf5b1ef36 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -69,6 +69,7 @@ DEFINE_IDR(ib_uverbs_mw_idr); DEFINE_IDR(ib_uverbs_ah_idr); DEFINE_IDR(ib_uverbs_cq_idr); DEFINE_IDR(ib_uverbs_qp_idr); +DEFINE_IDR(ib_uverbs_srq_idr); static spinlock_t map_lock; static DECLARE_BITMAP(dev_map, IB_UVERBS_MAX_DEVICES); @@ -93,6 +94,9 @@ static ssize_t (*uverbs_cmd_table[])(struct ib_uverbs_file *file, [IB_USER_VERBS_CMD_DESTROY_QP] = ib_uverbs_destroy_qp, [IB_USER_VERBS_CMD_ATTACH_MCAST] = ib_uverbs_attach_mcast, [IB_USER_VERBS_CMD_DETACH_MCAST] = ib_uverbs_detach_mcast, + [IB_USER_VERBS_CMD_CREATE_SRQ] = ib_uverbs_create_srq, + [IB_USER_VERBS_CMD_MODIFY_SRQ] = ib_uverbs_modify_srq, + [IB_USER_VERBS_CMD_DESTROY_SRQ] = ib_uverbs_destroy_srq, }; static struct vfsmount *uverbs_event_mnt; @@ -127,7 +131,14 @@ static int ib_dealloc_ucontext(struct ib_ucontext *context) kfree(uobj); } - /* XXX Free SRQs */ + list_for_each_entry_safe(uobj, tmp, &context->srq_list, list) { + struct ib_srq *srq = idr_find(&ib_uverbs_srq_idr, uobj->id); + idr_remove(&ib_uverbs_srq_idr, uobj->id); + ib_destroy_srq(srq); + list_del(&uobj->list); + kfree(uobj); + } + /* XXX Free MWs */ list_for_each_entry_safe(uobj, tmp, &context->mr_list, list) { @@ -346,6 +357,13 @@ void ib_uverbs_qp_event_handler(struct ib_event *event, void *context_ptr) event->event); } +void ib_uverbs_srq_event_handler(struct ib_event *event, void *context_ptr) +{ + ib_uverbs_async_handler(context_ptr, + event->element.srq->uobject->user_handle, + event->event); +} + static void ib_uverbs_event_handler(struct ib_event_handler *handler, struct ib_event *event) { diff --git a/drivers/infiniband/include/ib_user_verbs.h b/drivers/infiniband/include/ib_user_verbs.h index 35857857aa3e..7ebb01c8f996 100644 --- a/drivers/infiniband/include/ib_user_verbs.h +++ b/drivers/infiniband/include/ib_user_verbs.h @@ -78,7 +78,12 @@ enum { IB_USER_VERBS_CMD_POST_SEND, IB_USER_VERBS_CMD_POST_RECV, IB_USER_VERBS_CMD_ATTACH_MCAST, - IB_USER_VERBS_CMD_DETACH_MCAST + IB_USER_VERBS_CMD_DETACH_MCAST, + IB_USER_VERBS_CMD_CREATE_SRQ, + IB_USER_VERBS_CMD_MODIFY_SRQ, + IB_USER_VERBS_CMD_QUERY_SRQ, + IB_USER_VERBS_CMD_DESTROY_SRQ, + IB_USER_VERBS_CMD_POST_SRQ_RECV }; /* @@ -386,4 +391,32 @@ struct ib_uverbs_detach_mcast { __u64 driver_data[0]; }; +struct ib_uverbs_create_srq { + __u64 response; + __u64 user_handle; + __u32 pd_handle; + __u32 max_wr; + __u32 max_sge; + __u32 srq_limit; + __u64 driver_data[0]; +}; + +struct ib_uverbs_create_srq_resp { + __u32 srq_handle; +}; + +struct ib_uverbs_modify_srq { + __u32 srq_handle; + __u32 attr_mask; + __u32 max_wr; + __u32 max_sge; + __u32 srq_limit; + __u32 reserved; + __u64 driver_data[0]; +}; + +struct ib_uverbs_destroy_srq { + __u32 srq_handle; +}; + #endif /* IB_USER_VERBS_H */ -- cgit v1.2.1 From 87b816706bb2b79fbaff8e0b8e279e783273383e Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 18 Aug 2005 13:39:31 -0700 Subject: [PATCH] IB/mthca: Factor out common queue alloc code Clean up the allocation of memory for queues by factoring out the common code into mthca_buf_alloc() and mthca_buf_free(). Now CQs and QPs share the same queue allocation code, which we'll also use for SRQs. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_allocator.c | 116 +++++++++++++++++++++++++ drivers/infiniband/hw/mthca/mthca_cq.c | 118 ++------------------------ drivers/infiniband/hw/mthca/mthca_dev.h | 5 ++ drivers/infiniband/hw/mthca/mthca_provider.h | 15 ++-- drivers/infiniband/hw/mthca/mthca_qp.c | 111 ++---------------------- 5 files changed, 141 insertions(+), 224 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_allocator.c b/drivers/infiniband/hw/mthca/mthca_allocator.c index b1db48dd91d6..9ba3211cef7c 100644 --- a/drivers/infiniband/hw/mthca/mthca_allocator.c +++ b/drivers/infiniband/hw/mthca/mthca_allocator.c @@ -177,3 +177,119 @@ void mthca_array_cleanup(struct mthca_array *array, int nent) kfree(array->page_list); } + +/* + * Handling for queue buffers -- we allocate a bunch of memory and + * register it in a memory region at HCA virtual address 0. If the + * requested size is > max_direct, we split the allocation into + * multiple pages, so we don't require too much contiguous memory. + */ + +int mthca_buf_alloc(struct mthca_dev *dev, int size, int max_direct, + union mthca_buf *buf, int *is_direct, struct mthca_pd *pd, + int hca_write, struct mthca_mr *mr) +{ + int err = -ENOMEM; + int npages, shift; + u64 *dma_list = NULL; + dma_addr_t t; + int i; + + if (size <= max_direct) { + *is_direct = 1; + npages = 1; + shift = get_order(size) + PAGE_SHIFT; + + buf->direct.buf = dma_alloc_coherent(&dev->pdev->dev, + size, &t, GFP_KERNEL); + if (!buf->direct.buf) + return -ENOMEM; + + pci_unmap_addr_set(&buf->direct, mapping, t); + + memset(buf->direct.buf, 0, size); + + while (t & ((1 << shift) - 1)) { + --shift; + npages *= 2; + } + + dma_list = kmalloc(npages * sizeof *dma_list, GFP_KERNEL); + if (!dma_list) + goto err_free; + + for (i = 0; i < npages; ++i) + dma_list[i] = t + i * (1 << shift); + } else { + *is_direct = 0; + npages = (size + PAGE_SIZE - 1) / PAGE_SIZE; + shift = PAGE_SHIFT; + + dma_list = kmalloc(npages * sizeof *dma_list, GFP_KERNEL); + if (!dma_list) + return -ENOMEM; + + buf->page_list = kmalloc(npages * sizeof *buf->page_list, + GFP_KERNEL); + if (!buf->page_list) + goto err_out; + + for (i = 0; i < npages; ++i) + buf->page_list[i].buf = NULL; + + for (i = 0; i < npages; ++i) { + buf->page_list[i].buf = + dma_alloc_coherent(&dev->pdev->dev, PAGE_SIZE, + &t, GFP_KERNEL); + if (!buf->page_list[i].buf) + goto err_free; + + dma_list[i] = t; + pci_unmap_addr_set(&buf->page_list[i], mapping, t); + + memset(buf->page_list[i].buf, 0, PAGE_SIZE); + } + } + + err = mthca_mr_alloc_phys(dev, pd->pd_num, + dma_list, shift, npages, + 0, size, + MTHCA_MPT_FLAG_LOCAL_READ | + (hca_write ? MTHCA_MPT_FLAG_LOCAL_WRITE : 0), + mr); + if (err) + goto err_free; + + kfree(dma_list); + + return 0; + +err_free: + mthca_buf_free(dev, size, buf, *is_direct, NULL); + +err_out: + kfree(dma_list); + + return err; +} + +void mthca_buf_free(struct mthca_dev *dev, int size, union mthca_buf *buf, + int is_direct, struct mthca_mr *mr) +{ + int i; + + if (mr) + mthca_free_mr(dev, mr); + + if (is_direct) + dma_free_coherent(&dev->pdev->dev, size, buf->direct.buf, + pci_unmap_addr(&buf->direct, mapping)); + else { + for (i = 0; i < (size + PAGE_SIZE - 1) / PAGE_SIZE; ++i) + dma_free_coherent(&dev->pdev->dev, PAGE_SIZE, + buf->page_list[i].buf, + pci_unmap_addr(&buf->page_list[i], + mapping)); + kfree(buf->page_list); + } +} diff --git a/drivers/infiniband/hw/mthca/mthca_cq.c b/drivers/infiniband/hw/mthca/mthca_cq.c index 907867d1f2e0..8afb9ee2fbc6 100644 --- a/drivers/infiniband/hw/mthca/mthca_cq.c +++ b/drivers/infiniband/hw/mthca/mthca_cq.c @@ -639,113 +639,8 @@ int mthca_arbel_arm_cq(struct ib_cq *ibcq, enum ib_cq_notify notify) static void mthca_free_cq_buf(struct mthca_dev *dev, struct mthca_cq *cq) { - int i; - int size; - - if (cq->is_direct) - dma_free_coherent(&dev->pdev->dev, - (cq->ibcq.cqe + 1) * MTHCA_CQ_ENTRY_SIZE, - cq->queue.direct.buf, - pci_unmap_addr(&cq->queue.direct, - mapping)); - else { - size = (cq->ibcq.cqe + 1) * MTHCA_CQ_ENTRY_SIZE; - for (i = 0; i < (size + PAGE_SIZE - 1) / PAGE_SIZE; ++i) - if (cq->queue.page_list[i].buf) - dma_free_coherent(&dev->pdev->dev, PAGE_SIZE, - cq->queue.page_list[i].buf, - pci_unmap_addr(&cq->queue.page_list[i], - mapping)); - - kfree(cq->queue.page_list); - } -} - -static int mthca_alloc_cq_buf(struct mthca_dev *dev, int size, - struct mthca_cq *cq) -{ - int err = -ENOMEM; - int npages, shift; - u64 *dma_list = NULL; - dma_addr_t t; - int i; - - if (size <= MTHCA_MAX_DIRECT_CQ_SIZE) { - cq->is_direct = 1; - npages = 1; - shift = get_order(size) + PAGE_SHIFT; - - cq->queue.direct.buf = dma_alloc_coherent(&dev->pdev->dev, - size, &t, GFP_KERNEL); - if (!cq->queue.direct.buf) - return -ENOMEM; - - pci_unmap_addr_set(&cq->queue.direct, mapping, t); - - memset(cq->queue.direct.buf, 0, size); - - while (t & ((1 << shift) - 1)) { - --shift; - npages *= 2; - } - - dma_list = kmalloc(npages * sizeof *dma_list, GFP_KERNEL); - if (!dma_list) - goto err_free; - - for (i = 0; i < npages; ++i) - dma_list[i] = t + i * (1 << shift); - } else { - cq->is_direct = 0; - npages = (size + PAGE_SIZE - 1) / PAGE_SIZE; - shift = PAGE_SHIFT; - - dma_list = kmalloc(npages * sizeof *dma_list, GFP_KERNEL); - if (!dma_list) - return -ENOMEM; - - cq->queue.page_list = kmalloc(npages * sizeof *cq->queue.page_list, - GFP_KERNEL); - if (!cq->queue.page_list) - goto err_out; - - for (i = 0; i < npages; ++i) - cq->queue.page_list[i].buf = NULL; - - for (i = 0; i < npages; ++i) { - cq->queue.page_list[i].buf = - dma_alloc_coherent(&dev->pdev->dev, PAGE_SIZE, - &t, GFP_KERNEL); - if (!cq->queue.page_list[i].buf) - goto err_free; - - dma_list[i] = t; - pci_unmap_addr_set(&cq->queue.page_list[i], mapping, t); - - memset(cq->queue.page_list[i].buf, 0, PAGE_SIZE); - } - } - - err = mthca_mr_alloc_phys(dev, dev->driver_pd.pd_num, - dma_list, shift, npages, - 0, size, - MTHCA_MPT_FLAG_LOCAL_WRITE | - MTHCA_MPT_FLAG_LOCAL_READ, - &cq->mr); - if (err) - goto err_free; - - kfree(dma_list); - - return 0; - -err_free: - mthca_free_cq_buf(dev, cq); - -err_out: - kfree(dma_list); - - return err; + mthca_buf_free(dev, (cq->ibcq.cqe + 1) * MTHCA_CQ_ENTRY_SIZE, + &cq->queue, cq->is_direct, &cq->mr); } int mthca_init_cq(struct mthca_dev *dev, int nent, @@ -797,7 +692,9 @@ int mthca_init_cq(struct mthca_dev *dev, int nent, cq_context = mailbox->buf; if (cq->is_kernel) { - err = mthca_alloc_cq_buf(dev, size, cq); + err = mthca_buf_alloc(dev, size, MTHCA_MAX_DIRECT_CQ_SIZE, + &cq->queue, &cq->is_direct, + &dev->driver_pd, 1, &cq->mr); if (err) goto err_out_mailbox; @@ -858,10 +755,8 @@ int mthca_init_cq(struct mthca_dev *dev, int nent, return 0; err_out_free_mr: - if (cq->is_kernel) { - mthca_free_mr(dev, &cq->mr); + if (cq->is_kernel) mthca_free_cq_buf(dev, cq); - } err_out_mailbox: mthca_free_mailbox(dev, mailbox); @@ -929,7 +824,6 @@ void mthca_free_cq(struct mthca_dev *dev, wait_event(cq->wait, !atomic_read(&cq->refcount)); if (cq->is_kernel) { - mthca_free_mr(dev, &cq->mr); mthca_free_cq_buf(dev, cq); if (mthca_is_memfree(dev)) { mthca_free_db(dev, MTHCA_DB_TYPE_CQ_ARM, cq->arm_db_index); diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index 0f90a173ecee..cb78b5d07201 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -361,6 +361,11 @@ int mthca_array_set(struct mthca_array *array, int index, void *value); void mthca_array_clear(struct mthca_array *array, int index); int mthca_array_init(struct mthca_array *array, int nent); void mthca_array_cleanup(struct mthca_array *array, int nent); +int mthca_buf_alloc(struct mthca_dev *dev, int size, int max_direct, + union mthca_buf *buf, int *is_direct, struct mthca_pd *pd, + int hca_write, struct mthca_mr *mr); +void mthca_buf_free(struct mthca_dev *dev, int size, union mthca_buf *buf, + int is_direct, struct mthca_mr *mr); int mthca_init_uar_table(struct mthca_dev *dev); int mthca_init_pd_table(struct mthca_dev *dev); diff --git a/drivers/infiniband/hw/mthca/mthca_provider.h b/drivers/infiniband/hw/mthca/mthca_provider.h index 624651edf577..b95249ee46cf 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.h +++ b/drivers/infiniband/hw/mthca/mthca_provider.h @@ -51,6 +51,11 @@ struct mthca_buf_list { DECLARE_PCI_UNMAP_ADDR(mapping) }; +union mthca_buf { + struct mthca_buf_list direct; + struct mthca_buf_list *page_list; +}; + struct mthca_uar { unsigned long pfn; int index; @@ -187,10 +192,7 @@ struct mthca_cq { __be32 *arm_db; int arm_sn; - union { - struct mthca_buf_list direct; - struct mthca_buf_list *page_list; - } queue; + union mthca_buf queue; struct mthca_mr mr; wait_queue_head_t wait; }; @@ -228,10 +230,7 @@ struct mthca_qp { int send_wqe_offset; u64 *wrid; - union { - struct mthca_buf_list direct; - struct mthca_buf_list *page_list; - } queue; + union mthca_buf queue; wait_queue_head_t wait; }; diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index b7e3d2342799..b5a0bef15b7e 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -926,10 +926,6 @@ static int mthca_alloc_wqe_buf(struct mthca_dev *dev, struct mthca_qp *qp) { int size; - int i; - int npages, shift; - dma_addr_t t; - u64 *dma_list = NULL; int err = -ENOMEM; size = sizeof (struct mthca_next_seg) + @@ -979,116 +975,24 @@ static int mthca_alloc_wqe_buf(struct mthca_dev *dev, if (!qp->wrid) goto err_out; - if (size <= MTHCA_MAX_DIRECT_QP_SIZE) { - qp->is_direct = 1; - npages = 1; - shift = get_order(size) + PAGE_SHIFT; - - if (0) - mthca_dbg(dev, "Creating direct QP of size %d (shift %d)\n", - size, shift); - - qp->queue.direct.buf = dma_alloc_coherent(&dev->pdev->dev, size, - &t, GFP_KERNEL); - if (!qp->queue.direct.buf) - goto err_out; - - pci_unmap_addr_set(&qp->queue.direct, mapping, t); - - memset(qp->queue.direct.buf, 0, size); - - while (t & ((1 << shift) - 1)) { - --shift; - npages *= 2; - } - - dma_list = kmalloc(npages * sizeof *dma_list, GFP_KERNEL); - if (!dma_list) - goto err_out_free; - - for (i = 0; i < npages; ++i) - dma_list[i] = t + i * (1 << shift); - } else { - qp->is_direct = 0; - npages = size / PAGE_SIZE; - shift = PAGE_SHIFT; - - if (0) - mthca_dbg(dev, "Creating indirect QP with %d pages\n", npages); - - dma_list = kmalloc(npages * sizeof *dma_list, GFP_KERNEL); - if (!dma_list) - goto err_out; - - qp->queue.page_list = kmalloc(npages * - sizeof *qp->queue.page_list, - GFP_KERNEL); - if (!qp->queue.page_list) - goto err_out; - - for (i = 0; i < npages; ++i) { - qp->queue.page_list[i].buf = - dma_alloc_coherent(&dev->pdev->dev, PAGE_SIZE, - &t, GFP_KERNEL); - if (!qp->queue.page_list[i].buf) - goto err_out_free; - - memset(qp->queue.page_list[i].buf, 0, PAGE_SIZE); - - pci_unmap_addr_set(&qp->queue.page_list[i], mapping, t); - dma_list[i] = t; - } - } - - err = mthca_mr_alloc_phys(dev, pd->pd_num, dma_list, shift, - npages, 0, size, - MTHCA_MPT_FLAG_LOCAL_READ, - &qp->mr); + err = mthca_buf_alloc(dev, size, MTHCA_MAX_DIRECT_QP_SIZE, + &qp->queue, &qp->is_direct, pd, 0, &qp->mr); if (err) - goto err_out_free; + goto err_out; - kfree(dma_list); return 0; - err_out_free: - if (qp->is_direct) { - dma_free_coherent(&dev->pdev->dev, size, qp->queue.direct.buf, - pci_unmap_addr(&qp->queue.direct, mapping)); - } else - for (i = 0; i < npages; ++i) { - if (qp->queue.page_list[i].buf) - dma_free_coherent(&dev->pdev->dev, PAGE_SIZE, - qp->queue.page_list[i].buf, - pci_unmap_addr(&qp->queue.page_list[i], - mapping)); - - } - - err_out: +err_out: kfree(qp->wrid); - kfree(dma_list); return err; } static void mthca_free_wqe_buf(struct mthca_dev *dev, struct mthca_qp *qp) { - int i; - int size = PAGE_ALIGN(qp->send_wqe_offset + - (qp->sq.max << qp->sq.wqe_shift)); - - if (qp->is_direct) { - dma_free_coherent(&dev->pdev->dev, size, qp->queue.direct.buf, - pci_unmap_addr(&qp->queue.direct, mapping)); - } else { - for (i = 0; i < size / PAGE_SIZE; ++i) { - dma_free_coherent(&dev->pdev->dev, PAGE_SIZE, - qp->queue.page_list[i].buf, - pci_unmap_addr(&qp->queue.page_list[i], - mapping)); - } - } - + mthca_buf_free(dev, PAGE_ALIGN(qp->send_wqe_offset + + (qp->sq.max << qp->sq.wqe_shift)), + &qp->queue, qp->is_direct, &qp->mr); kfree(qp->wrid); } @@ -1433,7 +1337,6 @@ void mthca_free_qp(struct mthca_dev *dev, if (qp->ibqp.send_cq != qp->ibqp.recv_cq) mthca_cq_clean(dev, to_mcq(qp->ibqp.recv_cq)->cqn, qp->qpn); - mthca_free_mr(dev, &qp->mr); mthca_free_memfree(dev, qp); mthca_free_wqe_buf(dev, qp); } -- cgit v1.2.1 From 288bdeb4bc5b89befd7ee2f0f0183604034ff6c5 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 19 Aug 2005 09:19:05 -0700 Subject: [PATCH] IB/mthca: Simplify handling of completions with error Mem-free HCAs never generate error CQEs that complete multiple WQEs, so just skip the call to mthca_free_err_wqe() for them rather than having logic to handle the mem-free case in mthca_free_err_wqe(). Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_cq.c | 13 ++++++++----- drivers/infiniband/hw/mthca/mthca_qp.c | 5 +---- 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_cq.c b/drivers/infiniband/hw/mthca/mthca_cq.c index 8afb9ee2fbc6..5dee908c2f34 100644 --- a/drivers/infiniband/hw/mthca/mthca_cq.c +++ b/drivers/infiniband/hw/mthca/mthca_cq.c @@ -367,6 +367,13 @@ static int handle_error_cqe(struct mthca_dev *dev, struct mthca_cq *cq, break; } + /* + * Mem-free HCAs always generate one CQE per WQE, even in the + * error case, so we don't have to check the doorbell count, etc. + */ + if (mthca_is_memfree(dev)) + return 0; + err = mthca_free_err_wqe(dev, qp, is_send, wqe_index, &dbd, &new_wqe); if (err) return err; @@ -375,12 +382,8 @@ static int handle_error_cqe(struct mthca_dev *dev, struct mthca_cq *cq, * If we're at the end of the WQE chain, or we've used up our * doorbell count, free the CQE. Otherwise just update it for * the next poll operation. - * - * This does not apply to mem-free HCAs: they don't use the - * doorbell count field, and so we should always free the CQE. */ - if (mthca_is_memfree(dev) || - !(new_wqe & cpu_to_be32(0x3f)) || (!cqe->db_cnt && dbd)) + if (!(new_wqe & cpu_to_be32(0x3f)) || (!cqe->db_cnt && dbd)) return 0; cqe->db_cnt = cpu_to_be16(be16_to_cpu(cqe->db_cnt) - dbd); diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index b5a0bef15b7e..43af076acd5f 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -2086,10 +2086,7 @@ int mthca_free_err_wqe(struct mthca_dev *dev, struct mthca_qp *qp, int is_send, else next = get_recv_wqe(qp, index); - if (mthca_is_memfree(dev)) - *dbd = 1; - else - *dbd = !!(next->ee_nds & cpu_to_be32(MTHCA_NEXT_DBD)); + *dbd = !!(next->ee_nds & cpu_to_be32(MTHCA_NEXT_DBD)); if (next->ee_nds & cpu_to_be32(0x3f)) *new_wqe = (next->nda_op & cpu_to_be32(~0x3f)) | (next->ee_nds & cpu_to_be32(0x3f)); -- cgit v1.2.1 From c04bc3d1f417a8a90eef9ab46523dfd44858b28d Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 19 Aug 2005 10:33:35 -0700 Subject: [PATCH] IB/mthca: Move WQE structures into their own header Move the definitions of the WQE structures from mthca_qp.c into mthca_wqe.h, so that we'll be able to share them when we add the SRQ code in mthca_srq.c. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_qp.c | 75 +-------------------- drivers/infiniband/hw/mthca/mthca_wqe.h | 114 ++++++++++++++++++++++++++++++++ 2 files changed, 115 insertions(+), 74 deletions(-) create mode 100644 drivers/infiniband/hw/mthca/mthca_wqe.h (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 43af076acd5f..ebb8f4a3dd80 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -44,6 +44,7 @@ #include "mthca_dev.h" #include "mthca_cmd.h" #include "mthca_memfree.h" +#include "mthca_wqe.h" enum { MTHCA_MAX_DIRECT_QP_SIZE = 4 * PAGE_SIZE, @@ -175,80 +176,6 @@ enum { MTHCA_QP_OPTPAR_SCHED_QUEUE = 1 << 16 }; -enum { - MTHCA_NEXT_DBD = 1 << 7, - MTHCA_NEXT_FENCE = 1 << 6, - MTHCA_NEXT_CQ_UPDATE = 1 << 3, - MTHCA_NEXT_EVENT_GEN = 1 << 2, - MTHCA_NEXT_SOLICIT = 1 << 1, - - MTHCA_MLX_VL15 = 1 << 17, - MTHCA_MLX_SLR = 1 << 16 -}; - -enum { - MTHCA_INVAL_LKEY = 0x100 -}; - -struct mthca_next_seg { - __be32 nda_op; /* [31:6] next WQE [4:0] next opcode */ - __be32 ee_nds; /* [31:8] next EE [7] DBD [6] F [5:0] next WQE size */ - __be32 flags; /* [3] CQ [2] Event [1] Solicit */ - __be32 imm; /* immediate data */ -}; - -struct mthca_tavor_ud_seg { - u32 reserved1; - __be32 lkey; - __be64 av_addr; - u32 reserved2[4]; - __be32 dqpn; - __be32 qkey; - u32 reserved3[2]; -}; - -struct mthca_arbel_ud_seg { - __be32 av[8]; - __be32 dqpn; - __be32 qkey; - u32 reserved[2]; -}; - -struct mthca_bind_seg { - __be32 flags; /* [31] Atomic [30] rem write [29] rem read */ - u32 reserved; - __be32 new_rkey; - __be32 lkey; - __be64 addr; - __be64 length; -}; - -struct mthca_raddr_seg { - __be64 raddr; - __be32 rkey; - u32 reserved; -}; - -struct mthca_atomic_seg { - __be64 swap_add; - __be64 compare; -}; - -struct mthca_data_seg { - __be32 byte_count; - __be32 lkey; - __be64 addr; -}; - -struct mthca_mlx_seg { - __be32 nda_op; - __be32 nds; - __be32 flags; /* [17] VL15 [16] SLR [14:12] static rate - [11:8] SL [3] C [2] E */ - __be16 rlid; - __be16 vcrc; -}; - static const u8 mthca_opcode[] = { [IB_WR_SEND] = MTHCA_OPCODE_SEND, [IB_WR_SEND_WITH_IMM] = MTHCA_OPCODE_SEND_IMM, diff --git a/drivers/infiniband/hw/mthca/mthca_wqe.h b/drivers/infiniband/hw/mthca/mthca_wqe.h new file mode 100644 index 000000000000..1f4c0ff28f79 --- /dev/null +++ b/drivers/infiniband/hw/mthca/mthca_wqe.h @@ -0,0 +1,114 @@ +/* + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * $Id: mthca_wqe.h 3047 2005-08-10 03:59:35Z roland $ + */ + +#ifndef MTHCA_WQE_H +#define MTHCA_WQE_H + +#include + +enum { + MTHCA_NEXT_DBD = 1 << 7, + MTHCA_NEXT_FENCE = 1 << 6, + MTHCA_NEXT_CQ_UPDATE = 1 << 3, + MTHCA_NEXT_EVENT_GEN = 1 << 2, + MTHCA_NEXT_SOLICIT = 1 << 1, + + MTHCA_MLX_VL15 = 1 << 17, + MTHCA_MLX_SLR = 1 << 16 +}; + +enum { + MTHCA_INVAL_LKEY = 0x100 +}; + +struct mthca_next_seg { + __be32 nda_op; /* [31:6] next WQE [4:0] next opcode */ + __be32 ee_nds; /* [31:8] next EE [7] DBD [6] F [5:0] next WQE size */ + __be32 flags; /* [3] CQ [2] Event [1] Solicit */ + __be32 imm; /* immediate data */ +}; + +struct mthca_tavor_ud_seg { + u32 reserved1; + __be32 lkey; + __be64 av_addr; + u32 reserved2[4]; + __be32 dqpn; + __be32 qkey; + u32 reserved3[2]; +}; + +struct mthca_arbel_ud_seg { + __be32 av[8]; + __be32 dqpn; + __be32 qkey; + u32 reserved[2]; +}; + +struct mthca_bind_seg { + __be32 flags; /* [31] Atomic [30] rem write [29] rem read */ + u32 reserved; + __be32 new_rkey; + __be32 lkey; + __be64 addr; + __be64 length; +}; + +struct mthca_raddr_seg { + __be64 raddr; + __be32 rkey; + u32 reserved; +}; + +struct mthca_atomic_seg { + __be64 swap_add; + __be64 compare; +}; + +struct mthca_data_seg { + __be32 byte_count; + __be32 lkey; + __be64 addr; +}; + +struct mthca_mlx_seg { + __be32 nda_op; + __be32 nds; + __be32 flags; /* [17] VL15 [16] SLR [14:12] static rate + [11:8] SL [3] C [2] E */ + __be16 rlid; + __be16 vcrc; +}; + +#endif /* MTHCA_WQE_H */ -- cgit v1.2.1 From d20a40192868082eff6fec729b311cb8463b4a21 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 19 Aug 2005 10:36:11 -0700 Subject: [PATCH] IB/mthca: Handle context tables smaller than our chunk size When creating a table in context memory where the table is smaller than our chunk size, we don't want to allocate and map a full chunk. Instead, allocate just enough memory to cover the table. This can be pretty simple because all tables are a power-of-2 size, so either the table is a multiple of the chunk size, or it's smaller than one chunk. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_memfree.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c index fba0a53ba6ea..1827400f189b 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.c +++ b/drivers/infiniband/hw/mthca/mthca_memfree.c @@ -286,6 +286,7 @@ struct mthca_icm_table *mthca_alloc_icm_table(struct mthca_dev *dev, { struct mthca_icm_table *table; int num_icm; + unsigned chunk_size; int i; u8 status; @@ -306,7 +307,11 @@ struct mthca_icm_table *mthca_alloc_icm_table(struct mthca_dev *dev, table->icm[i] = NULL; for (i = 0; i * MTHCA_TABLE_CHUNK_SIZE < reserved * obj_size; ++i) { - table->icm[i] = mthca_alloc_icm(dev, MTHCA_TABLE_CHUNK_SIZE >> PAGE_SHIFT, + chunk_size = MTHCA_TABLE_CHUNK_SIZE; + if ((i + 1) * MTHCA_TABLE_CHUNK_SIZE > nobj * obj_size) + chunk_size = nobj * obj_size - i * MTHCA_TABLE_CHUNK_SIZE; + + table->icm[i] = mthca_alloc_icm(dev, chunk_size >> PAGE_SHIFT, (use_lowmem ? GFP_KERNEL : GFP_HIGHUSER) | __GFP_NOWARN); if (!table->icm[i]) -- cgit v1.2.1 From ec34a922d243c3401a694450734e9effb2bafbfe Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 19 Aug 2005 10:59:31 -0700 Subject: [PATCH] IB/mthca: Add SRQ implementation Add mthca support for shared receive queues (SRQs), including userspace SRQs. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/Makefile | 2 +- drivers/infiniband/hw/mthca/mthca_cmd.c | 24 ++ drivers/infiniband/hw/mthca/mthca_cmd.h | 5 + drivers/infiniband/hw/mthca/mthca_cq.c | 32 +- drivers/infiniband/hw/mthca/mthca_dev.h | 24 +- drivers/infiniband/hw/mthca/mthca_main.c | 48 ++- drivers/infiniband/hw/mthca/mthca_profile.c | 1 + drivers/infiniband/hw/mthca/mthca_profile.h | 1 + drivers/infiniband/hw/mthca/mthca_provider.c | 82 ++++ drivers/infiniband/hw/mthca/mthca_provider.h | 28 ++ drivers/infiniband/hw/mthca/mthca_qp.c | 33 +- drivers/infiniband/hw/mthca/mthca_srq.c | 591 +++++++++++++++++++++++++++ drivers/infiniband/hw/mthca/mthca_user.h | 11 + 13 files changed, 857 insertions(+), 25 deletions(-) create mode 100644 drivers/infiniband/hw/mthca/mthca_srq.c (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/Makefile b/drivers/infiniband/hw/mthca/Makefile index 5dcbd43073e2..1eb87408e069 100644 --- a/drivers/infiniband/hw/mthca/Makefile +++ b/drivers/infiniband/hw/mthca/Makefile @@ -9,4 +9,4 @@ obj-$(CONFIG_INFINIBAND_MTHCA) += ib_mthca.o ib_mthca-y := mthca_main.o mthca_cmd.o mthca_profile.o mthca_reset.o \ mthca_allocator.o mthca_eq.o mthca_pd.o mthca_cq.o \ mthca_mr.o mthca_qp.o mthca_av.o mthca_mcg.o mthca_mad.o \ - mthca_provider.o mthca_memfree.o mthca_uar.o + mthca_provider.o mthca_memfree.o mthca_uar.o mthca_srq.o diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index c258c1b7022e..60e4b213635a 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -109,6 +109,7 @@ enum { CMD_SW2HW_SRQ = 0x35, CMD_HW2SW_SRQ = 0x36, CMD_QUERY_SRQ = 0x37, + CMD_ARM_SRQ = 0x40, /* QP/EE commands */ CMD_RST2INIT_QPEE = 0x19, @@ -1032,6 +1033,8 @@ int mthca_QUERY_DEV_LIM(struct mthca_dev *dev, mthca_dbg(dev, "Max QPs: %d, reserved QPs: %d, entry size: %d\n", dev_lim->max_qps, dev_lim->reserved_qps, dev_lim->qpc_entry_sz); + mthca_dbg(dev, "Max SRQs: %d, reserved SRQs: %d, entry size: %d\n", + dev_lim->max_srqs, dev_lim->reserved_srqs, dev_lim->srq_entry_sz); mthca_dbg(dev, "Max CQs: %d, reserved CQs: %d, entry size: %d\n", dev_lim->max_cqs, dev_lim->reserved_cqs, dev_lim->cqc_entry_sz); mthca_dbg(dev, "Max EQs: %d, reserved EQs: %d, entry size: %d\n", @@ -1500,6 +1503,27 @@ int mthca_HW2SW_CQ(struct mthca_dev *dev, struct mthca_mailbox *mailbox, CMD_TIME_CLASS_A, status); } +int mthca_SW2HW_SRQ(struct mthca_dev *dev, struct mthca_mailbox *mailbox, + int srq_num, u8 *status) +{ + return mthca_cmd(dev, mailbox->dma, srq_num, 0, CMD_SW2HW_SRQ, + CMD_TIME_CLASS_A, status); +} + +int mthca_HW2SW_SRQ(struct mthca_dev *dev, struct mthca_mailbox *mailbox, + int srq_num, u8 *status) +{ + return mthca_cmd_box(dev, 0, mailbox->dma, srq_num, 0, + CMD_HW2SW_SRQ, + CMD_TIME_CLASS_A, status); +} + +int mthca_ARM_SRQ(struct mthca_dev *dev, int srq_num, int limit, u8 *status) +{ + return mthca_cmd(dev, limit, srq_num, 0, CMD_ARM_SRQ, + CMD_TIME_CLASS_B, status); +} + int mthca_MODIFY_QP(struct mthca_dev *dev, int trans, u32 num, int is_ee, struct mthca_mailbox *mailbox, u32 optmask, u8 *status) diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.h b/drivers/infiniband/hw/mthca/mthca_cmd.h index 11f02a61432a..ef2a765d6953 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.h +++ b/drivers/infiniband/hw/mthca/mthca_cmd.h @@ -298,6 +298,11 @@ int mthca_SW2HW_CQ(struct mthca_dev *dev, struct mthca_mailbox *mailbox, int cq_num, u8 *status); int mthca_HW2SW_CQ(struct mthca_dev *dev, struct mthca_mailbox *mailbox, int cq_num, u8 *status); +int mthca_SW2HW_SRQ(struct mthca_dev *dev, struct mthca_mailbox *mailbox, + int srq_num, u8 *status); +int mthca_HW2SW_SRQ(struct mthca_dev *dev, struct mthca_mailbox *mailbox, + int srq_num, u8 *status); +int mthca_ARM_SRQ(struct mthca_dev *dev, int srq_num, int limit, u8 *status); int mthca_MODIFY_QP(struct mthca_dev *dev, int trans, u32 num, int is_ee, struct mthca_mailbox *mailbox, u32 optmask, u8 *status); diff --git a/drivers/infiniband/hw/mthca/mthca_cq.c b/drivers/infiniband/hw/mthca/mthca_cq.c index 5dee908c2f34..5ece609c2ee0 100644 --- a/drivers/infiniband/hw/mthca/mthca_cq.c +++ b/drivers/infiniband/hw/mthca/mthca_cq.c @@ -224,7 +224,8 @@ void mthca_cq_event(struct mthca_dev *dev, u32 cqn) cq->ibcq.comp_handler(&cq->ibcq, cq->ibcq.cq_context); } -void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn) +void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn, + struct mthca_srq *srq) { struct mthca_cq *cq; struct mthca_cqe *cqe; @@ -265,8 +266,11 @@ void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn) */ while (prod_index > cq->cons_index) { cqe = get_cqe(cq, (prod_index - 1) & cq->ibcq.cqe); - if (cqe->my_qpn == cpu_to_be32(qpn)) + if (cqe->my_qpn == cpu_to_be32(qpn)) { + if (srq) + mthca_free_srq_wqe(srq, be32_to_cpu(cqe->wqe)); ++nfreed; + } else if (nfreed) memcpy(get_cqe(cq, (prod_index - 1 + nfreed) & cq->ibcq.cqe), @@ -455,23 +459,27 @@ static inline int mthca_poll_one(struct mthca_dev *dev, >> wq->wqe_shift); entry->wr_id = (*cur_qp)->wrid[wqe_index + (*cur_qp)->rq.max]; + } else if ((*cur_qp)->ibqp.srq) { + struct mthca_srq *srq = to_msrq((*cur_qp)->ibqp.srq); + u32 wqe = be32_to_cpu(cqe->wqe); + wq = NULL; + wqe_index = wqe >> srq->wqe_shift; + entry->wr_id = srq->wrid[wqe_index]; + mthca_free_srq_wqe(srq, wqe); } else { wq = &(*cur_qp)->rq; wqe_index = be32_to_cpu(cqe->wqe) >> wq->wqe_shift; entry->wr_id = (*cur_qp)->wrid[wqe_index]; } - if (wq->last_comp < wqe_index) - wq->tail += wqe_index - wq->last_comp; - else - wq->tail += wqe_index + wq->max - wq->last_comp; - - wq->last_comp = wqe_index; + if (wq) { + if (wq->last_comp < wqe_index) + wq->tail += wqe_index - wq->last_comp; + else + wq->tail += wqe_index + wq->max - wq->last_comp; - if (0) - mthca_dbg(dev, "%s completion for QP %06x, index %d (nr %d)\n", - is_send ? "Send" : "Receive", - (*cur_qp)->qpn, wqe_index, wq->max); + wq->last_comp = wqe_index; + } if (is_error) { err = handle_error_cqe(dev, cq, *cur_qp, wqe_index, is_send, diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index cb78b5d07201..7bff5a8425f4 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -218,6 +218,13 @@ struct mthca_cq_table { struct mthca_icm_table *table; }; +struct mthca_srq_table { + struct mthca_alloc alloc; + spinlock_t lock; + struct mthca_array srq; + struct mthca_icm_table *table; +}; + struct mthca_qp_table { struct mthca_alloc alloc; u32 rdb_base; @@ -299,6 +306,7 @@ struct mthca_dev { struct mthca_mr_table mr_table; struct mthca_eq_table eq_table; struct mthca_cq_table cq_table; + struct mthca_srq_table srq_table; struct mthca_qp_table qp_table; struct mthca_av_table av_table; struct mthca_mcg_table mcg_table; @@ -372,6 +380,7 @@ int mthca_init_pd_table(struct mthca_dev *dev); int mthca_init_mr_table(struct mthca_dev *dev); int mthca_init_eq_table(struct mthca_dev *dev); int mthca_init_cq_table(struct mthca_dev *dev); +int mthca_init_srq_table(struct mthca_dev *dev); int mthca_init_qp_table(struct mthca_dev *dev); int mthca_init_av_table(struct mthca_dev *dev); int mthca_init_mcg_table(struct mthca_dev *dev); @@ -381,6 +390,7 @@ void mthca_cleanup_pd_table(struct mthca_dev *dev); void mthca_cleanup_mr_table(struct mthca_dev *dev); void mthca_cleanup_eq_table(struct mthca_dev *dev); void mthca_cleanup_cq_table(struct mthca_dev *dev); +void mthca_cleanup_srq_table(struct mthca_dev *dev); void mthca_cleanup_qp_table(struct mthca_dev *dev); void mthca_cleanup_av_table(struct mthca_dev *dev); void mthca_cleanup_mcg_table(struct mthca_dev *dev); @@ -431,7 +441,19 @@ int mthca_init_cq(struct mthca_dev *dev, int nent, void mthca_free_cq(struct mthca_dev *dev, struct mthca_cq *cq); void mthca_cq_event(struct mthca_dev *dev, u32 cqn); -void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn); +void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn, + struct mthca_srq *srq); + +int mthca_alloc_srq(struct mthca_dev *dev, struct mthca_pd *pd, + struct ib_srq_attr *attr, struct mthca_srq *srq); +void mthca_free_srq(struct mthca_dev *dev, struct mthca_srq *srq); +void mthca_srq_event(struct mthca_dev *dev, u32 srqn, + enum ib_event_type event_type); +void mthca_free_srq_wqe(struct mthca_srq *srq, u32 wqe_addr); +int mthca_tavor_post_srq_recv(struct ib_srq *srq, struct ib_recv_wr *wr, + struct ib_recv_wr **bad_wr); +int mthca_arbel_post_srq_recv(struct ib_srq *srq, struct ib_recv_wr *wr, + struct ib_recv_wr **bad_wr); void mthca_qp_event(struct mthca_dev *dev, u32 qpn, enum ib_event_type event_type); diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 16c5d4a805f0..3241d6c9dc11 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -253,6 +253,8 @@ static int __devinit mthca_init_tavor(struct mthca_dev *mdev) profile = default_profile; profile.num_uar = dev_lim.uar_size / PAGE_SIZE; profile.uarc_size = 0; + if (mdev->mthca_flags & MTHCA_FLAG_SRQ) + profile.num_srq = dev_lim.max_srqs; err = mthca_make_profile(mdev, &profile, &dev_lim, &init_hca); if (err < 0) @@ -424,15 +426,29 @@ static int __devinit mthca_init_icm(struct mthca_dev *mdev, } mdev->cq_table.table = mthca_alloc_icm_table(mdev, init_hca->cqc_base, - dev_lim->cqc_entry_sz, - mdev->limits.num_cqs, - mdev->limits.reserved_cqs, 0); + dev_lim->cqc_entry_sz, + mdev->limits.num_cqs, + mdev->limits.reserved_cqs, 0); if (!mdev->cq_table.table) { mthca_err(mdev, "Failed to map CQ context memory, aborting.\n"); err = -ENOMEM; goto err_unmap_rdb; } + if (mdev->mthca_flags & MTHCA_FLAG_SRQ) { + mdev->srq_table.table = + mthca_alloc_icm_table(mdev, init_hca->srqc_base, + dev_lim->srq_entry_sz, + mdev->limits.num_srqs, + mdev->limits.reserved_srqs, 0); + if (!mdev->srq_table.table) { + mthca_err(mdev, "Failed to map SRQ context memory, " + "aborting.\n"); + err = -ENOMEM; + goto err_unmap_cq; + } + } + /* * It's not strictly required, but for simplicity just map the * whole multicast group table now. The table isn't very big @@ -448,11 +464,15 @@ static int __devinit mthca_init_icm(struct mthca_dev *mdev, if (!mdev->mcg_table.table) { mthca_err(mdev, "Failed to map MCG context memory, aborting.\n"); err = -ENOMEM; - goto err_unmap_cq; + goto err_unmap_srq; } return 0; +err_unmap_srq: + if (mdev->mthca_flags & MTHCA_FLAG_SRQ) + mthca_free_icm_table(mdev, mdev->srq_table.table); + err_unmap_cq: mthca_free_icm_table(mdev, mdev->cq_table.table); @@ -532,6 +552,8 @@ static int __devinit mthca_init_arbel(struct mthca_dev *mdev) profile = default_profile; profile.num_uar = dev_lim.uar_size / PAGE_SIZE; profile.num_udav = 0; + if (mdev->mthca_flags & MTHCA_FLAG_SRQ) + profile.num_srq = dev_lim.max_srqs; icm_size = mthca_make_profile(mdev, &profile, &dev_lim, &init_hca); if ((int) icm_size < 0) { @@ -558,6 +580,8 @@ static int __devinit mthca_init_arbel(struct mthca_dev *mdev) return 0; err_free_icm: + if (mdev->mthca_flags & MTHCA_FLAG_SRQ) + mthca_free_icm_table(mdev, mdev->srq_table.table); mthca_free_icm_table(mdev, mdev->cq_table.table); mthca_free_icm_table(mdev, mdev->qp_table.rdb_table); mthca_free_icm_table(mdev, mdev->qp_table.eqp_table); @@ -587,6 +611,8 @@ static void mthca_close_hca(struct mthca_dev *mdev) mthca_CLOSE_HCA(mdev, 0, &status); if (mthca_is_memfree(mdev)) { + if (mdev->mthca_flags & MTHCA_FLAG_SRQ) + mthca_free_icm_table(mdev, mdev->srq_table.table); mthca_free_icm_table(mdev, mdev->cq_table.table); mthca_free_icm_table(mdev, mdev->qp_table.rdb_table); mthca_free_icm_table(mdev, mdev->qp_table.eqp_table); @@ -731,11 +757,18 @@ static int __devinit mthca_setup_hca(struct mthca_dev *dev) goto err_cmd_poll; } + err = mthca_init_srq_table(dev); + if (err) { + mthca_err(dev, "Failed to initialize " + "shared receive queue table, aborting.\n"); + goto err_cq_table_free; + } + err = mthca_init_qp_table(dev); if (err) { mthca_err(dev, "Failed to initialize " "queue pair table, aborting.\n"); - goto err_cq_table_free; + goto err_srq_table_free; } err = mthca_init_av_table(dev); @@ -760,6 +793,9 @@ err_av_table_free: err_qp_table_free: mthca_cleanup_qp_table(dev); +err_srq_table_free: + mthca_cleanup_srq_table(dev); + err_cq_table_free: mthca_cleanup_cq_table(dev); @@ -1046,6 +1082,7 @@ err_cleanup: mthca_cleanup_mcg_table(mdev); mthca_cleanup_av_table(mdev); mthca_cleanup_qp_table(mdev); + mthca_cleanup_srq_table(mdev); mthca_cleanup_cq_table(mdev); mthca_cmd_use_polling(mdev); mthca_cleanup_eq_table(mdev); @@ -1095,6 +1132,7 @@ static void __devexit mthca_remove_one(struct pci_dev *pdev) mthca_cleanup_mcg_table(mdev); mthca_cleanup_av_table(mdev); mthca_cleanup_qp_table(mdev); + mthca_cleanup_srq_table(mdev); mthca_cleanup_cq_table(mdev); mthca_cmd_use_polling(mdev); mthca_cleanup_eq_table(mdev); diff --git a/drivers/infiniband/hw/mthca/mthca_profile.c b/drivers/infiniband/hw/mthca/mthca_profile.c index 9b280661f2a1..0576056b34f4 100644 --- a/drivers/infiniband/hw/mthca/mthca_profile.c +++ b/drivers/infiniband/hw/mthca/mthca_profile.c @@ -102,6 +102,7 @@ u64 mthca_make_profile(struct mthca_dev *dev, profile[MTHCA_RES_UARC].size = request->uarc_size; profile[MTHCA_RES_QP].num = request->num_qp; + profile[MTHCA_RES_SRQ].num = request->num_srq; profile[MTHCA_RES_EQP].num = request->num_qp; profile[MTHCA_RES_RDB].num = request->num_qp * request->rdb_per_qp; profile[MTHCA_RES_CQ].num = request->num_cq; diff --git a/drivers/infiniband/hw/mthca/mthca_profile.h b/drivers/infiniband/hw/mthca/mthca_profile.h index 0d4f070a3fa1..94641808f97f 100644 --- a/drivers/infiniband/hw/mthca/mthca_profile.h +++ b/drivers/infiniband/hw/mthca/mthca_profile.h @@ -42,6 +42,7 @@ struct mthca_profile { int num_qp; int rdb_per_qp; + int num_srq; int num_cq; int num_mcg; int num_mpt; diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 08a7340e19ff..23ceb26af8fe 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -425,6 +425,77 @@ static int mthca_ah_destroy(struct ib_ah *ah) return 0; } +static struct ib_srq *mthca_create_srq(struct ib_pd *pd, + struct ib_srq_init_attr *init_attr, + struct ib_udata *udata) +{ + struct mthca_create_srq ucmd; + struct mthca_ucontext *context = NULL; + struct mthca_srq *srq; + int err; + + srq = kmalloc(sizeof *srq, GFP_KERNEL); + if (!srq) + return ERR_PTR(-ENOMEM); + + if (pd->uobject) { + context = to_mucontext(pd->uobject->context); + + if (ib_copy_from_udata(&ucmd, udata, sizeof ucmd)) + return ERR_PTR(-EFAULT); + + err = mthca_map_user_db(to_mdev(pd->device), &context->uar, + context->db_tab, ucmd.db_index, + ucmd.db_page); + + if (err) + goto err_free; + + srq->mr.ibmr.lkey = ucmd.lkey; + srq->db_index = ucmd.db_index; + } + + err = mthca_alloc_srq(to_mdev(pd->device), to_mpd(pd), + &init_attr->attr, srq); + + if (err && pd->uobject) + mthca_unmap_user_db(to_mdev(pd->device), &context->uar, + context->db_tab, ucmd.db_index); + + if (err) + goto err_free; + + if (context && ib_copy_to_udata(udata, &srq->srqn, sizeof (__u32))) { + mthca_free_srq(to_mdev(pd->device), srq); + err = -EFAULT; + goto err_free; + } + + return &srq->ibsrq; + +err_free: + kfree(srq); + + return ERR_PTR(err); +} + +static int mthca_destroy_srq(struct ib_srq *srq) +{ + struct mthca_ucontext *context; + + if (srq->uobject) { + context = to_mucontext(srq->uobject->context); + + mthca_unmap_user_db(to_mdev(srq->device), &context->uar, + context->db_tab, to_msrq(srq)->db_index); + } + + mthca_free_srq(to_mdev(srq->device), to_msrq(srq)); + kfree(srq); + + return 0; +} + static struct ib_qp *mthca_create_qp(struct ib_pd *pd, struct ib_qp_init_attr *init_attr, struct ib_udata *udata) @@ -1003,6 +1074,17 @@ int mthca_register_device(struct mthca_dev *dev) dev->ib_dev.dealloc_pd = mthca_dealloc_pd; dev->ib_dev.create_ah = mthca_ah_create; dev->ib_dev.destroy_ah = mthca_ah_destroy; + + if (dev->mthca_flags & MTHCA_FLAG_SRQ) { + dev->ib_dev.create_srq = mthca_create_srq; + dev->ib_dev.destroy_srq = mthca_destroy_srq; + + if (mthca_is_memfree(dev)) + dev->ib_dev.post_srq_recv = mthca_arbel_post_srq_recv; + else + dev->ib_dev.post_srq_recv = mthca_tavor_post_srq_recv; + } + dev->ib_dev.create_qp = mthca_create_qp; dev->ib_dev.modify_qp = mthca_modify_qp; dev->ib_dev.destroy_qp = mthca_destroy_qp; diff --git a/drivers/infiniband/hw/mthca/mthca_provider.h b/drivers/infiniband/hw/mthca/mthca_provider.h index b95249ee46cf..024015678c8a 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.h +++ b/drivers/infiniband/hw/mthca/mthca_provider.h @@ -197,6 +197,29 @@ struct mthca_cq { wait_queue_head_t wait; }; +struct mthca_srq { + struct ib_srq ibsrq; + spinlock_t lock; + atomic_t refcount; + int srqn; + int max; + int max_gs; + int wqe_shift; + int first_free; + int last_free; + u16 counter; /* Arbel only */ + int db_index; /* Arbel only */ + __be32 *db; /* Arbel only */ + void *last; + + int is_direct; + u64 *wrid; + union mthca_buf queue; + struct mthca_mr mr; + + wait_queue_head_t wait; +}; + struct mthca_wq { spinlock_t lock; int max; @@ -277,6 +300,11 @@ static inline struct mthca_cq *to_mcq(struct ib_cq *ibcq) return container_of(ibcq, struct mthca_cq, ibcq); } +static inline struct mthca_srq *to_msrq(struct ib_srq *ibsrq) +{ + return container_of(ibsrq, struct mthca_srq, ibsrq); +} + static inline struct mthca_qp *to_mqp(struct ib_qp *ibqp) { return container_of(ibqp, struct mthca_qp, ibqp); diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index ebb8f4a3dd80..7607b9800736 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -612,10 +612,13 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask) qp_context->mtu_msgmax = (attr->path_mtu << 5) | 31; if (mthca_is_memfree(dev)) { - qp_context->rq_size_stride = - ((ffs(qp->rq.max) - 1) << 3) | (qp->rq.wqe_shift - 4); - qp_context->sq_size_stride = - ((ffs(qp->sq.max) - 1) << 3) | (qp->sq.wqe_shift - 4); + if (qp->rq.max) + qp_context->rq_size_stride = long_log2(qp->rq.max) << 3; + qp_context->rq_size_stride |= qp->rq.wqe_shift - 4; + + if (qp->sq.max) + qp_context->sq_size_stride = long_log2(qp->sq.max) << 3; + qp_context->sq_size_stride |= qp->sq.wqe_shift - 4; } /* leave arbel_sched_queue as 0 */ @@ -784,6 +787,9 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask) qp_context->params2 |= cpu_to_be32(MTHCA_QP_BIT_RSC); + if (ibqp->srq) + qp_context->params2 |= cpu_to_be32(MTHCA_QP_BIT_RIC); + if (attr_mask & IB_QP_MIN_RNR_TIMER) { qp_context->rnr_nextrecvpsn |= cpu_to_be32(attr->min_rnr_timer << 24); qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RNR_TIMEOUT); @@ -806,6 +812,10 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask) qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_Q_KEY); } + if (ibqp->srq) + qp_context->srqn = cpu_to_be32(1 << 24 | + to_msrq(ibqp->srq)->srqn); + err = mthca_MODIFY_QP(dev, state_table[cur_state][new_state].trans, qp->qpn, 0, mailbox, 0, &status); if (status) { @@ -1260,9 +1270,11 @@ void mthca_free_qp(struct mthca_dev *dev, * unref the mem-free tables and free the QPN in our table. */ if (!qp->ibqp.uobject) { - mthca_cq_clean(dev, to_mcq(qp->ibqp.send_cq)->cqn, qp->qpn); + mthca_cq_clean(dev, to_mcq(qp->ibqp.send_cq)->cqn, qp->qpn, + qp->ibqp.srq ? to_msrq(qp->ibqp.srq) : NULL); if (qp->ibqp.send_cq != qp->ibqp.recv_cq) - mthca_cq_clean(dev, to_mcq(qp->ibqp.recv_cq)->cqn, qp->qpn); + mthca_cq_clean(dev, to_mcq(qp->ibqp.recv_cq)->cqn, qp->qpn, + qp->ibqp.srq ? to_msrq(qp->ibqp.srq) : NULL); mthca_free_memfree(dev, qp); mthca_free_wqe_buf(dev, qp); @@ -2008,6 +2020,15 @@ int mthca_free_err_wqe(struct mthca_dev *dev, struct mthca_qp *qp, int is_send, { struct mthca_next_seg *next; + /* + * For SRQs, all WQEs generate a CQE, so we're always at the + * end of the doorbell chain. + */ + if (qp->ibqp.srq) { + *new_wqe = 0; + return 0; + } + if (is_send) next = get_send_wqe(qp, index); else diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c new file mode 100644 index 000000000000..75cd2d84ef12 --- /dev/null +++ b/drivers/infiniband/hw/mthca/mthca_srq.c @@ -0,0 +1,591 @@ +/* + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * $Id: mthca_srq.c 3047 2005-08-10 03:59:35Z roland $ + */ + +#include "mthca_dev.h" +#include "mthca_cmd.h" +#include "mthca_memfree.h" +#include "mthca_wqe.h" + +enum { + MTHCA_MAX_DIRECT_SRQ_SIZE = 4 * PAGE_SIZE +}; + +struct mthca_tavor_srq_context { + __be64 wqe_base_ds; /* low 6 bits is descriptor size */ + __be32 state_pd; + __be32 lkey; + __be32 uar; + __be32 wqe_cnt; + u32 reserved[2]; +}; + +struct mthca_arbel_srq_context { + __be32 state_logsize_srqn; + __be32 lkey; + __be32 db_index; + __be32 logstride_usrpage; + __be64 wqe_base; + __be32 eq_pd; + __be16 limit_watermark; + __be16 wqe_cnt; + u16 reserved1; + __be16 wqe_counter; + u32 reserved2[3]; +}; + +static void *get_wqe(struct mthca_srq *srq, int n) +{ + if (srq->is_direct) + return srq->queue.direct.buf + (n << srq->wqe_shift); + else + return srq->queue.page_list[(n << srq->wqe_shift) >> PAGE_SHIFT].buf + + ((n << srq->wqe_shift) & (PAGE_SIZE - 1)); +} + +/* + * Return a pointer to the location within a WQE that we're using as a + * link when the WQE is in the free list. We use an offset of 4 + * because in the Tavor case, posting a WQE may overwrite the first + * four bytes of the previous WQE. The offset avoids corrupting our + * free list if the WQE has already completed and been put on the free + * list when we post the next WQE. + */ +static inline int *wqe_to_link(void *wqe) +{ + return (int *) (wqe + 4); +} + +static void mthca_tavor_init_srq_context(struct mthca_dev *dev, + struct mthca_pd *pd, + struct mthca_srq *srq, + struct mthca_tavor_srq_context *context) +{ + memset(context, 0, sizeof *context); + + context->wqe_base_ds = cpu_to_be64(1 << (srq->wqe_shift - 4)); + context->state_pd = cpu_to_be32(pd->pd_num); + context->lkey = cpu_to_be32(srq->mr.ibmr.lkey); + + if (pd->ibpd.uobject) + context->uar = + cpu_to_be32(to_mucontext(pd->ibpd.uobject->context)->uar.index); + else + context->uar = cpu_to_be32(dev->driver_uar.index); +} + +static void mthca_arbel_init_srq_context(struct mthca_dev *dev, + struct mthca_pd *pd, + struct mthca_srq *srq, + struct mthca_arbel_srq_context *context) +{ + int logsize; + + memset(context, 0, sizeof *context); + + logsize = long_log2(srq->max) + srq->wqe_shift; + context->state_logsize_srqn = cpu_to_be32(logsize << 24 | srq->srqn); + context->lkey = cpu_to_be32(srq->mr.ibmr.lkey); + context->db_index = cpu_to_be32(srq->db_index); + context->logstride_usrpage = cpu_to_be32((srq->wqe_shift - 4) << 29); + if (pd->ibpd.uobject) + context->logstride_usrpage |= + cpu_to_be32(to_mucontext(pd->ibpd.uobject->context)->uar.index); + else + context->logstride_usrpage |= cpu_to_be32(dev->driver_uar.index); + context->eq_pd = cpu_to_be32(MTHCA_EQ_ASYNC << 24 | pd->pd_num); +} + +static void mthca_free_srq_buf(struct mthca_dev *dev, struct mthca_srq *srq) +{ + mthca_buf_free(dev, srq->max << srq->wqe_shift, &srq->queue, + srq->is_direct, &srq->mr); + kfree(srq->wrid); +} + +static int mthca_alloc_srq_buf(struct mthca_dev *dev, struct mthca_pd *pd, + struct mthca_srq *srq) +{ + struct mthca_data_seg *scatter; + void *wqe; + int err; + int i; + + if (pd->ibpd.uobject) + return 0; + + srq->wrid = kmalloc(srq->max * sizeof (u64), GFP_KERNEL); + if (!srq->wrid) + return -ENOMEM; + + err = mthca_buf_alloc(dev, srq->max << srq->wqe_shift, + MTHCA_MAX_DIRECT_SRQ_SIZE, + &srq->queue, &srq->is_direct, pd, 1, &srq->mr); + if (err) { + kfree(srq->wrid); + return err; + } + + /* + * Now initialize the SRQ buffer so that all of the WQEs are + * linked into the list of free WQEs. In addition, set the + * scatter list L_Keys to the sentry value of 0x100. + */ + for (i = 0; i < srq->max; ++i) { + wqe = get_wqe(srq, i); + + *wqe_to_link(wqe) = i < srq->max - 1 ? i + 1 : -1; + + for (scatter = wqe + sizeof (struct mthca_next_seg); + (void *) scatter < wqe + (1 << srq->wqe_shift); + ++scatter) + scatter->lkey = cpu_to_be32(MTHCA_INVAL_LKEY); + } + + return 0; +} + +int mthca_alloc_srq(struct mthca_dev *dev, struct mthca_pd *pd, + struct ib_srq_attr *attr, struct mthca_srq *srq) +{ + struct mthca_mailbox *mailbox; + u8 status; + int ds; + int err; + + /* Sanity check SRQ size before proceeding */ + if (attr->max_wr > 16 << 20 || attr->max_sge > 64) + return -EINVAL; + + srq->max = attr->max_wr; + srq->max_gs = attr->max_sge; + srq->last = NULL; + srq->counter = 0; + + if (mthca_is_memfree(dev)) + srq->max = roundup_pow_of_two(srq->max + 1); + + ds = min(64UL, + roundup_pow_of_two(sizeof (struct mthca_next_seg) + + srq->max_gs * sizeof (struct mthca_data_seg))); + srq->wqe_shift = long_log2(ds); + + srq->srqn = mthca_alloc(&dev->srq_table.alloc); + if (srq->srqn == -1) + return -ENOMEM; + + if (mthca_is_memfree(dev)) { + err = mthca_table_get(dev, dev->srq_table.table, srq->srqn); + if (err) + goto err_out; + + if (!pd->ibpd.uobject) { + srq->db_index = mthca_alloc_db(dev, MTHCA_DB_TYPE_SRQ, + srq->srqn, &srq->db); + if (srq->db_index < 0) { + err = -ENOMEM; + goto err_out_icm; + } + } + } + + mailbox = mthca_alloc_mailbox(dev, GFP_KERNEL); + if (IS_ERR(mailbox)) { + err = PTR_ERR(mailbox); + goto err_out_db; + } + + err = mthca_alloc_srq_buf(dev, pd, srq); + if (err) + goto err_out_mailbox; + + spin_lock_init(&srq->lock); + atomic_set(&srq->refcount, 1); + init_waitqueue_head(&srq->wait); + + if (mthca_is_memfree(dev)) + mthca_arbel_init_srq_context(dev, pd, srq, mailbox->buf); + else + mthca_tavor_init_srq_context(dev, pd, srq, mailbox->buf); + + err = mthca_SW2HW_SRQ(dev, mailbox, srq->srqn, &status); + + if (err) { + mthca_warn(dev, "SW2HW_SRQ failed (%d)\n", err); + goto err_out_free_buf; + } + if (status) { + mthca_warn(dev, "SW2HW_SRQ returned status 0x%02x\n", + status); + err = -EINVAL; + goto err_out_free_buf; + } + + spin_lock_irq(&dev->srq_table.lock); + if (mthca_array_set(&dev->srq_table.srq, + srq->srqn & (dev->limits.num_srqs - 1), + srq)) { + spin_unlock_irq(&dev->srq_table.lock); + goto err_out_free_srq; + } + spin_unlock_irq(&dev->srq_table.lock); + + mthca_free_mailbox(dev, mailbox); + + srq->first_free = 0; + srq->last_free = srq->max - 1; + + return 0; + +err_out_free_srq: + err = mthca_HW2SW_SRQ(dev, mailbox, srq->srqn, &status); + if (err) + mthca_warn(dev, "HW2SW_SRQ failed (%d)\n", err); + else if (status) + mthca_warn(dev, "HW2SW_SRQ returned status 0x%02x\n", status); + +err_out_free_buf: + if (!pd->ibpd.uobject) + mthca_free_srq_buf(dev, srq); + +err_out_mailbox: + mthca_free_mailbox(dev, mailbox); + +err_out_db: + if (!pd->ibpd.uobject && mthca_is_memfree(dev)) + mthca_free_db(dev, MTHCA_DB_TYPE_SRQ, srq->db_index); + +err_out_icm: + mthca_table_put(dev, dev->srq_table.table, srq->srqn); + +err_out: + mthca_free(&dev->srq_table.alloc, srq->srqn); + + return err; +} + +void mthca_free_srq(struct mthca_dev *dev, struct mthca_srq *srq) +{ + struct mthca_mailbox *mailbox; + int err; + u8 status; + + mailbox = mthca_alloc_mailbox(dev, GFP_KERNEL); + if (IS_ERR(mailbox)) { + mthca_warn(dev, "No memory for mailbox to free SRQ.\n"); + return; + } + + err = mthca_HW2SW_SRQ(dev, mailbox, srq->srqn, &status); + if (err) + mthca_warn(dev, "HW2SW_SRQ failed (%d)\n", err); + else if (status) + mthca_warn(dev, "HW2SW_SRQ returned status 0x%02x\n", status); + + spin_lock_irq(&dev->srq_table.lock); + mthca_array_clear(&dev->srq_table.srq, + srq->srqn & (dev->limits.num_srqs - 1)); + spin_unlock_irq(&dev->srq_table.lock); + + atomic_dec(&srq->refcount); + wait_event(srq->wait, !atomic_read(&srq->refcount)); + + if (!srq->ibsrq.uobject) { + mthca_free_srq_buf(dev, srq); + if (mthca_is_memfree(dev)) + mthca_free_db(dev, MTHCA_DB_TYPE_SRQ, srq->db_index); + } + + mthca_table_put(dev, dev->srq_table.table, srq->srqn); + mthca_free(&dev->srq_table.alloc, srq->srqn); + mthca_free_mailbox(dev, mailbox); +} + +void mthca_srq_event(struct mthca_dev *dev, u32 srqn, + enum ib_event_type event_type) +{ + struct mthca_srq *srq; + struct ib_event event; + + spin_lock(&dev->srq_table.lock); + srq = mthca_array_get(&dev->srq_table.srq, srqn & (dev->limits.num_srqs - 1)); + if (srq) + atomic_inc(&srq->refcount); + spin_unlock(&dev->srq_table.lock); + + if (!srq) { + mthca_warn(dev, "Async event for bogus SRQ %08x\n", srqn); + return; + } + + if (!srq->ibsrq.event_handler) + goto out; + + event.device = &dev->ib_dev; + event.event = event_type; + event.element.srq = &srq->ibsrq; + srq->ibsrq.event_handler(&event, srq->ibsrq.srq_context); + +out: + if (atomic_dec_and_test(&srq->refcount)) + wake_up(&srq->wait); +} + +/* + * This function must be called with IRQs disabled. + */ +void mthca_free_srq_wqe(struct mthca_srq *srq, u32 wqe_addr) +{ + int ind; + + ind = wqe_addr >> srq->wqe_shift; + + spin_lock(&srq->lock); + + if (likely(srq->first_free >= 0)) + *wqe_to_link(get_wqe(srq, srq->last_free)) = ind; + else + srq->first_free = ind; + + *wqe_to_link(get_wqe(srq, ind)) = -1; + srq->last_free = ind; + + spin_unlock(&srq->lock); +} + +int mthca_tavor_post_srq_recv(struct ib_srq *ibsrq, struct ib_recv_wr *wr, + struct ib_recv_wr **bad_wr) +{ + struct mthca_dev *dev = to_mdev(ibsrq->device); + struct mthca_srq *srq = to_msrq(ibsrq); + unsigned long flags; + int err = 0; + int first_ind; + int ind; + int next_ind; + int nreq; + int i; + void *wqe; + void *prev_wqe; + + spin_lock_irqsave(&srq->lock, flags); + + first_ind = srq->first_free; + + for (nreq = 0; wr; ++nreq, wr = wr->next) { + ind = srq->first_free; + + if (ind < 0) { + mthca_err(dev, "SRQ %06x full\n", srq->srqn); + err = -ENOMEM; + *bad_wr = wr; + return nreq; + } + + wqe = get_wqe(srq, ind); + next_ind = *wqe_to_link(wqe); + prev_wqe = srq->last; + srq->last = wqe; + + ((struct mthca_next_seg *) wqe)->nda_op = 0; + ((struct mthca_next_seg *) wqe)->ee_nds = 0; + /* flags field will always remain 0 */ + + wqe += sizeof (struct mthca_next_seg); + + if (unlikely(wr->num_sge > srq->max_gs)) { + err = -EINVAL; + *bad_wr = wr; + srq->last = prev_wqe; + return nreq; + } + + for (i = 0; i < wr->num_sge; ++i) { + ((struct mthca_data_seg *) wqe)->byte_count = + cpu_to_be32(wr->sg_list[i].length); + ((struct mthca_data_seg *) wqe)->lkey = + cpu_to_be32(wr->sg_list[i].lkey); + ((struct mthca_data_seg *) wqe)->addr = + cpu_to_be64(wr->sg_list[i].addr); + wqe += sizeof (struct mthca_data_seg); + } + + if (i < srq->max_gs) { + ((struct mthca_data_seg *) wqe)->byte_count = 0; + ((struct mthca_data_seg *) wqe)->lkey = cpu_to_be32(MTHCA_INVAL_LKEY); + ((struct mthca_data_seg *) wqe)->addr = 0; + } + + if (likely(prev_wqe)) { + ((struct mthca_next_seg *) prev_wqe)->nda_op = + cpu_to_be32((ind << srq->wqe_shift) | 1); + wmb(); + ((struct mthca_next_seg *) prev_wqe)->ee_nds = + cpu_to_be32(MTHCA_NEXT_DBD); + } + + srq->wrid[ind] = wr->wr_id; + srq->first_free = next_ind; + } + + return nreq; + + if (likely(nreq)) { + __be32 doorbell[2]; + + doorbell[0] = cpu_to_be32(first_ind << srq->wqe_shift); + doorbell[1] = cpu_to_be32((srq->srqn << 8) | nreq); + + /* + * Make sure that descriptors are written before + * doorbell is rung. + */ + wmb(); + + mthca_write64(doorbell, + dev->kar + MTHCA_RECEIVE_DOORBELL, + MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock)); + } + + spin_unlock_irqrestore(&srq->lock, flags); + return err; +} + +int mthca_arbel_post_srq_recv(struct ib_srq *ibsrq, struct ib_recv_wr *wr, + struct ib_recv_wr **bad_wr) +{ + struct mthca_dev *dev = to_mdev(ibsrq->device); + struct mthca_srq *srq = to_msrq(ibsrq); + unsigned long flags; + int err = 0; + int ind; + int next_ind; + int nreq; + int i; + void *wqe; + + spin_lock_irqsave(&srq->lock, flags); + + for (nreq = 0; wr; ++nreq, wr = wr->next) { + ind = srq->first_free; + + if (ind < 0) { + mthca_err(dev, "SRQ %06x full\n", srq->srqn); + err = -ENOMEM; + *bad_wr = wr; + return nreq; + } + + wqe = get_wqe(srq, ind); + next_ind = *wqe_to_link(wqe); + + ((struct mthca_next_seg *) wqe)->nda_op = + cpu_to_be32((next_ind << srq->wqe_shift) | 1); + ((struct mthca_next_seg *) wqe)->ee_nds = 0; + /* flags field will always remain 0 */ + + wqe += sizeof (struct mthca_next_seg); + + if (unlikely(wr->num_sge > srq->max_gs)) { + err = -EINVAL; + *bad_wr = wr; + return nreq; + } + + for (i = 0; i < wr->num_sge; ++i) { + ((struct mthca_data_seg *) wqe)->byte_count = + cpu_to_be32(wr->sg_list[i].length); + ((struct mthca_data_seg *) wqe)->lkey = + cpu_to_be32(wr->sg_list[i].lkey); + ((struct mthca_data_seg *) wqe)->addr = + cpu_to_be64(wr->sg_list[i].addr); + wqe += sizeof (struct mthca_data_seg); + } + + if (i < srq->max_gs) { + ((struct mthca_data_seg *) wqe)->byte_count = 0; + ((struct mthca_data_seg *) wqe)->lkey = cpu_to_be32(MTHCA_INVAL_LKEY); + ((struct mthca_data_seg *) wqe)->addr = 0; + } + + srq->wrid[ind] = wr->wr_id; + srq->first_free = next_ind; + } + + if (likely(nreq)) { + srq->counter += nreq; + + /* + * Make sure that descriptors are written before + * we write doorbell record. + */ + wmb(); + *srq->db = cpu_to_be32(srq->counter); + } + + spin_unlock_irqrestore(&srq->lock, flags); + return err; +} + +int __devinit mthca_init_srq_table(struct mthca_dev *dev) +{ + int err; + + if (!(dev->mthca_flags & MTHCA_FLAG_SRQ)) + return 0; + + spin_lock_init(&dev->srq_table.lock); + + err = mthca_alloc_init(&dev->srq_table.alloc, + dev->limits.num_srqs, + dev->limits.num_srqs - 1, + dev->limits.reserved_srqs); + if (err) + return err; + + err = mthca_array_init(&dev->srq_table.srq, + dev->limits.num_srqs); + if (err) + mthca_alloc_cleanup(&dev->srq_table.alloc); + + return err; +} + +void __devexit mthca_cleanup_srq_table(struct mthca_dev *dev) +{ + if (!(dev->mthca_flags & MTHCA_FLAG_SRQ)) + return; + + mthca_array_cleanup(&dev->srq_table.srq, dev->limits.num_srqs); + mthca_alloc_cleanup(&dev->srq_table.alloc); +} diff --git a/drivers/infiniband/hw/mthca/mthca_user.h b/drivers/infiniband/hw/mthca/mthca_user.h index 3024c1b4547d..41613ec8a04e 100644 --- a/drivers/infiniband/hw/mthca/mthca_user.h +++ b/drivers/infiniband/hw/mthca/mthca_user.h @@ -69,6 +69,17 @@ struct mthca_create_cq_resp { __u32 reserved; }; +struct mthca_create_srq { + __u32 lkey; + __u32 db_index; + __u64 db_page; +}; + +struct mthca_create_srq_resp { + __u32 srqn; + __u32 reserved; +}; + struct mthca_create_qp { __u32 lkey; __u32 reserved; -- cgit v1.2.1 From 4ce059378c04b40c2e9f658b1c6a2e9078b85c7c Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 19 Aug 2005 12:03:17 -0700 Subject: [PATCH] IPoIB: Set full membership bit in P_Keys Always make sure that the full membership bit is set in the P_Keys that IPoIB uses. This makes sure that all hosts join the correct multicast groups so that hosts that are partial partition members can talk to the rest of the network. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 968b27947f8d..57c3ac98991f 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -883,6 +883,12 @@ static ssize_t create_child(struct class_device *cdev, if (pkey < 0 || pkey > 0xffff) return -EINVAL; + /* + * Set the full membership bit, so that we join the right + * broadcast group, etc. + */ + pkey |= 0x8000; + ret = ipoib_vlan_add(container_of(cdev, struct net_device, class_dev), pkey); @@ -935,6 +941,12 @@ static struct net_device *ipoib_add_port(const char *format, goto alloc_mem_failed; } + /* + * Set the full membership bit, so that we join the right + * broadcast group, etc. + */ + priv->pkey |= 0x8000; + priv->dev->broadcast[8] = priv->pkey >> 8; priv->dev->broadcast[9] = priv->pkey & 0xff; -- cgit v1.2.1 From b9ef520f9caf20aba8ac7cb2bbba45b52ff19d53 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Fri, 19 Aug 2005 13:46:34 -0700 Subject: [PATCH] IB: fix userspace CM deadlock Fix deadlock condition resulting from trying to destroy a cm_id from the context of a CM thread. The synchronization around the ucm context structure is simplified as a result, and some simple code cleanup is included. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/ucm.c | 464 ++++++++++++++---------------------------- drivers/infiniband/core/ucm.h | 9 +- 2 files changed, 160 insertions(+), 313 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c index 61d07c732f49..79595826ccc7 100644 --- a/drivers/infiniband/core/ucm.c +++ b/drivers/infiniband/core/ucm.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2005 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Intel Corporation. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU @@ -73,14 +74,18 @@ static struct semaphore ctx_id_mutex; static struct idr ctx_id_table; static int ctx_id_rover = 0; -static struct ib_ucm_context *ib_ucm_ctx_get(int id) +static struct ib_ucm_context *ib_ucm_ctx_get(struct ib_ucm_file *file, int id) { struct ib_ucm_context *ctx; down(&ctx_id_mutex); ctx = idr_find(&ctx_id_table, id); - if (ctx) - ctx->ref++; + if (!ctx) + ctx = ERR_PTR(-ENOENT); + else if (ctx->file != file) + ctx = ERR_PTR(-EINVAL); + else + atomic_inc(&ctx->ref); up(&ctx_id_mutex); return ctx; @@ -88,21 +93,37 @@ static struct ib_ucm_context *ib_ucm_ctx_get(int id) static void ib_ucm_ctx_put(struct ib_ucm_context *ctx) { + if (atomic_dec_and_test(&ctx->ref)) + wake_up(&ctx->wait); +} + +static ssize_t ib_ucm_destroy_ctx(struct ib_ucm_file *file, int id) +{ + struct ib_ucm_context *ctx; struct ib_ucm_event *uevent; down(&ctx_id_mutex); - - ctx->ref--; - if (!ctx->ref) + ctx = idr_find(&ctx_id_table, id); + if (!ctx) + ctx = ERR_PTR(-ENOENT); + else if (ctx->file != file) + ctx = ERR_PTR(-EINVAL); + else idr_remove(&ctx_id_table, ctx->id); - up(&ctx_id_mutex); - if (ctx->ref) - return; + if (IS_ERR(ctx)) + return PTR_ERR(ctx); - down(&ctx->file->mutex); + atomic_dec(&ctx->ref); + wait_event(ctx->wait, !atomic_read(&ctx->ref)); + + /* No new events will be generated after destroying the cm_id. */ + if (!IS_ERR(ctx->cm_id)) + ib_destroy_cm_id(ctx->cm_id); + /* Cleanup events not yet reported to the user. */ + down(&file->mutex); list_del(&ctx->file_list); while (!list_empty(&ctx->events)) { @@ -117,13 +138,10 @@ static void ib_ucm_ctx_put(struct ib_ucm_context *ctx) kfree(uevent); } + up(&file->mutex); - up(&ctx->file->mutex); - - ucm_dbg("Destroyed CM ID <%d>\n", ctx->id); - - ib_destroy_cm_id(ctx->cm_id); kfree(ctx); + return 0; } static struct ib_ucm_context *ib_ucm_ctx_alloc(struct ib_ucm_file *file) @@ -135,11 +153,11 @@ static struct ib_ucm_context *ib_ucm_ctx_alloc(struct ib_ucm_file *file) if (!ctx) return NULL; - ctx->ref = 1; /* user reference */ + atomic_set(&ctx->ref, 1); + init_waitqueue_head(&ctx->wait); ctx->file = file; INIT_LIST_HEAD(&ctx->events); - init_MUTEX(&ctx->mutex); list_add_tail(&ctx->file_list, &file->ctxs); @@ -177,8 +195,8 @@ static void ib_ucm_event_path_get(struct ib_ucm_path_rec *upath, if (!kpath || !upath) return; - memcpy(upath->dgid, kpath->dgid.raw, sizeof(union ib_gid)); - memcpy(upath->sgid, kpath->sgid.raw, sizeof(union ib_gid)); + memcpy(upath->dgid, kpath->dgid.raw, sizeof *upath->dgid); + memcpy(upath->sgid, kpath->sgid.raw, sizeof *upath->sgid); upath->dlid = kpath->dlid; upath->slid = kpath->slid; @@ -201,10 +219,11 @@ static void ib_ucm_event_path_get(struct ib_ucm_path_rec *upath, kpath->packet_life_time_selector; } -static void ib_ucm_event_req_get(struct ib_ucm_req_event_resp *ureq, +static void ib_ucm_event_req_get(struct ib_ucm_context *ctx, + struct ib_ucm_req_event_resp *ureq, struct ib_cm_req_event_param *kreq) { - ureq->listen_id = (long)kreq->listen_id->context; + ureq->listen_id = ctx->id; ureq->remote_ca_guid = kreq->remote_ca_guid; ureq->remote_qkey = kreq->remote_qkey; @@ -240,34 +259,11 @@ static void ib_ucm_event_rep_get(struct ib_ucm_rep_event_resp *urep, urep->srq = krep->srq; } -static void ib_ucm_event_rej_get(struct ib_ucm_rej_event_resp *urej, - struct ib_cm_rej_event_param *krej) -{ - urej->reason = krej->reason; -} - -static void ib_ucm_event_mra_get(struct ib_ucm_mra_event_resp *umra, - struct ib_cm_mra_event_param *kmra) -{ - umra->timeout = kmra->service_timeout; -} - -static void ib_ucm_event_lap_get(struct ib_ucm_lap_event_resp *ulap, - struct ib_cm_lap_event_param *klap) -{ - ib_ucm_event_path_get(&ulap->path, klap->alternate_path); -} - -static void ib_ucm_event_apr_get(struct ib_ucm_apr_event_resp *uapr, - struct ib_cm_apr_event_param *kapr) -{ - uapr->status = kapr->ap_status; -} - -static void ib_ucm_event_sidr_req_get(struct ib_ucm_sidr_req_event_resp *ureq, +static void ib_ucm_event_sidr_req_get(struct ib_ucm_context *ctx, + struct ib_ucm_sidr_req_event_resp *ureq, struct ib_cm_sidr_req_event_param *kreq) { - ureq->listen_id = (long)kreq->listen_id->context; + ureq->listen_id = ctx->id; ureq->pkey = kreq->pkey; } @@ -279,19 +275,18 @@ static void ib_ucm_event_sidr_rep_get(struct ib_ucm_sidr_rep_event_resp *urep, urep->qpn = krep->qpn; }; -static int ib_ucm_event_process(struct ib_cm_event *evt, +static int ib_ucm_event_process(struct ib_ucm_context *ctx, + struct ib_cm_event *evt, struct ib_ucm_event *uvt) { void *info = NULL; - int result; switch (evt->event) { case IB_CM_REQ_RECEIVED: - ib_ucm_event_req_get(&uvt->resp.u.req_resp, + ib_ucm_event_req_get(ctx, &uvt->resp.u.req_resp, &evt->param.req_rcvd); uvt->data_len = IB_CM_REQ_PRIVATE_DATA_SIZE; - uvt->resp.present |= (evt->param.req_rcvd.primary_path ? - IB_UCM_PRES_PRIMARY : 0); + uvt->resp.present = IB_UCM_PRES_PRIMARY; uvt->resp.present |= (evt->param.req_rcvd.alternate_path ? IB_UCM_PRES_ALTERNATE : 0); break; @@ -299,57 +294,46 @@ static int ib_ucm_event_process(struct ib_cm_event *evt, ib_ucm_event_rep_get(&uvt->resp.u.rep_resp, &evt->param.rep_rcvd); uvt->data_len = IB_CM_REP_PRIVATE_DATA_SIZE; - break; case IB_CM_RTU_RECEIVED: uvt->data_len = IB_CM_RTU_PRIVATE_DATA_SIZE; uvt->resp.u.send_status = evt->param.send_status; - break; case IB_CM_DREQ_RECEIVED: uvt->data_len = IB_CM_DREQ_PRIVATE_DATA_SIZE; uvt->resp.u.send_status = evt->param.send_status; - break; case IB_CM_DREP_RECEIVED: uvt->data_len = IB_CM_DREP_PRIVATE_DATA_SIZE; uvt->resp.u.send_status = evt->param.send_status; - break; case IB_CM_MRA_RECEIVED: - ib_ucm_event_mra_get(&uvt->resp.u.mra_resp, - &evt->param.mra_rcvd); + uvt->resp.u.mra_resp.timeout = + evt->param.mra_rcvd.service_timeout; uvt->data_len = IB_CM_MRA_PRIVATE_DATA_SIZE; - break; case IB_CM_REJ_RECEIVED: - ib_ucm_event_rej_get(&uvt->resp.u.rej_resp, - &evt->param.rej_rcvd); + uvt->resp.u.rej_resp.reason = evt->param.rej_rcvd.reason; uvt->data_len = IB_CM_REJ_PRIVATE_DATA_SIZE; uvt->info_len = evt->param.rej_rcvd.ari_length; info = evt->param.rej_rcvd.ari; - break; case IB_CM_LAP_RECEIVED: - ib_ucm_event_lap_get(&uvt->resp.u.lap_resp, - &evt->param.lap_rcvd); + ib_ucm_event_path_get(&uvt->resp.u.lap_resp.path, + evt->param.lap_rcvd.alternate_path); uvt->data_len = IB_CM_LAP_PRIVATE_DATA_SIZE; - uvt->resp.present |= (evt->param.lap_rcvd.alternate_path ? - IB_UCM_PRES_ALTERNATE : 0); + uvt->resp.present = IB_UCM_PRES_ALTERNATE; break; case IB_CM_APR_RECEIVED: - ib_ucm_event_apr_get(&uvt->resp.u.apr_resp, - &evt->param.apr_rcvd); + uvt->resp.u.apr_resp.status = evt->param.apr_rcvd.ap_status; uvt->data_len = IB_CM_APR_PRIVATE_DATA_SIZE; uvt->info_len = evt->param.apr_rcvd.info_len; info = evt->param.apr_rcvd.apr_info; - break; case IB_CM_SIDR_REQ_RECEIVED: - ib_ucm_event_sidr_req_get(&uvt->resp.u.sidr_req_resp, + ib_ucm_event_sidr_req_get(ctx, &uvt->resp.u.sidr_req_resp, &evt->param.sidr_req_rcvd); uvt->data_len = IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE; - break; case IB_CM_SIDR_REP_RECEIVED: ib_ucm_event_sidr_rep_get(&uvt->resp.u.sidr_rep_resp, @@ -357,43 +341,35 @@ static int ib_ucm_event_process(struct ib_cm_event *evt, uvt->data_len = IB_CM_SIDR_REP_PRIVATE_DATA_SIZE; uvt->info_len = evt->param.sidr_rep_rcvd.info_len; info = evt->param.sidr_rep_rcvd.info; - break; default: uvt->resp.u.send_status = evt->param.send_status; - break; } - if (uvt->data_len && evt->private_data) { - + if (uvt->data_len) { uvt->data = kmalloc(uvt->data_len, GFP_KERNEL); - if (!uvt->data) { - result = -ENOMEM; - goto error; - } + if (!uvt->data) + goto err1; memcpy(uvt->data, evt->private_data, uvt->data_len); uvt->resp.present |= IB_UCM_PRES_DATA; } - if (uvt->info_len && info) { - + if (uvt->info_len) { uvt->info = kmalloc(uvt->info_len, GFP_KERNEL); - if (!uvt->info) { - result = -ENOMEM; - goto error; - } + if (!uvt->info) + goto err2; memcpy(uvt->info, info, uvt->info_len); uvt->resp.present |= IB_UCM_PRES_INFO; } - return 0; -error: - kfree(uvt->info); + +err2: kfree(uvt->data); - return result; +err1: + return -ENOMEM; } static int ib_ucm_event_handler(struct ib_cm_id *cm_id, @@ -403,63 +379,42 @@ static int ib_ucm_event_handler(struct ib_cm_id *cm_id, struct ib_ucm_context *ctx; int result = 0; int id; - /* - * lookup correct context based on event type. - */ - switch (event->event) { - case IB_CM_REQ_RECEIVED: - id = (long)event->param.req_rcvd.listen_id->context; - break; - case IB_CM_SIDR_REQ_RECEIVED: - id = (long)event->param.sidr_req_rcvd.listen_id->context; - break; - default: - id = (long)cm_id->context; - break; - } - ucm_dbg("Event. CM ID <%d> event <%d>\n", id, event->event); - - ctx = ib_ucm_ctx_get(id); - if (!ctx) - return -ENOENT; + ctx = cm_id->context; if (event->event == IB_CM_REQ_RECEIVED || event->event == IB_CM_SIDR_REQ_RECEIVED) id = IB_UCM_CM_ID_INVALID; + else + id = ctx->id; uevent = kmalloc(sizeof(*uevent), GFP_KERNEL); - if (!uevent) { - result = -ENOMEM; - goto done; - } + if (!uevent) + goto err1; memset(uevent, 0, sizeof(*uevent)); - uevent->resp.id = id; uevent->resp.event = event->event; - result = ib_ucm_event_process(event, uevent); + result = ib_ucm_event_process(ctx, event, uevent); if (result) - goto done; + goto err2; uevent->ctx = ctx; - uevent->cm_id = ((event->event == IB_CM_REQ_RECEIVED || - event->event == IB_CM_SIDR_REQ_RECEIVED ) ? - cm_id : NULL); + uevent->cm_id = (id == IB_UCM_CM_ID_INVALID) ? cm_id : NULL; down(&ctx->file->mutex); - list_add_tail(&uevent->file_list, &ctx->file->events); list_add_tail(&uevent->ctx_list, &ctx->events); - wake_up_interruptible(&ctx->file->poll_wait); - up(&ctx->file->mutex); -done: - ctx->error = result; - ib_ucm_ctx_put(ctx); /* func reference */ - return result; + return 0; + +err2: + kfree(uevent); +err1: + /* Destroy new cm_id's */ + return (id == IB_UCM_CM_ID_INVALID); } static ssize_t ib_ucm_event(struct ib_ucm_file *file, @@ -517,9 +472,8 @@ static ssize_t ib_ucm_event(struct ib_ucm_file *file, goto done; } - ctx->cm_id = uevent->cm_id; - ctx->cm_id->cm_handler = ib_ucm_event_handler; - ctx->cm_id->context = (void *)(unsigned long)ctx->id; + ctx->cm_id = uevent->cm_id; + ctx->cm_id->context = ctx; uevent->resp.id = ctx->id; @@ -585,30 +539,29 @@ static ssize_t ib_ucm_create_id(struct ib_ucm_file *file, if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; + down(&file->mutex); ctx = ib_ucm_ctx_alloc(file); + up(&file->mutex); if (!ctx) return -ENOMEM; - ctx->cm_id = ib_create_cm_id(ib_ucm_event_handler, - (void *)(unsigned long)ctx->id); - if (!ctx->cm_id) { - result = -ENOMEM; - goto err_cm; + ctx->cm_id = ib_create_cm_id(ib_ucm_event_handler, ctx); + if (IS_ERR(ctx->cm_id)) { + result = PTR_ERR(ctx->cm_id); + goto err; } resp.id = ctx->id; if (copy_to_user((void __user *)(unsigned long)cmd.response, &resp, sizeof(resp))) { result = -EFAULT; - goto err_ret; + goto err; } return 0; -err_ret: - ib_destroy_cm_id(ctx->cm_id); -err_cm: - ib_ucm_ctx_put(ctx); /* user reference */ +err: + ib_ucm_destroy_ctx(file, ctx->id); return result; } @@ -617,19 +570,11 @@ static ssize_t ib_ucm_destroy_id(struct ib_ucm_file *file, int in_len, int out_len) { struct ib_ucm_destroy_id cmd; - struct ib_ucm_context *ctx; if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; - ctx = ib_ucm_ctx_get(cmd.id); - if (!ctx) - return -ENOENT; - - ib_ucm_ctx_put(ctx); /* user reference */ - ib_ucm_ctx_put(ctx); /* func reference */ - - return 0; + return ib_ucm_destroy_ctx(file, cmd.id); } static ssize_t ib_ucm_attr_id(struct ib_ucm_file *file, @@ -647,15 +592,9 @@ static ssize_t ib_ucm_attr_id(struct ib_ucm_file *file, if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; - ctx = ib_ucm_ctx_get(cmd.id); - if (!ctx) - return -ENOENT; - - down(&ctx->file->mutex); - if (ctx->file != file) { - result = -EINVAL; - goto done; - } + ctx = ib_ucm_ctx_get(file, cmd.id); + if (IS_ERR(ctx)) + return PTR_ERR(ctx); resp.service_id = ctx->cm_id->service_id; resp.service_mask = ctx->cm_id->service_mask; @@ -666,9 +605,7 @@ static ssize_t ib_ucm_attr_id(struct ib_ucm_file *file, &resp, sizeof(resp))) result = -EFAULT; -done: - up(&ctx->file->mutex); - ib_ucm_ctx_put(ctx); /* func reference */ + ib_ucm_ctx_put(ctx); return result; } @@ -683,19 +620,12 @@ static ssize_t ib_ucm_listen(struct ib_ucm_file *file, if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; - ctx = ib_ucm_ctx_get(cmd.id); - if (!ctx) - return -ENOENT; + ctx = ib_ucm_ctx_get(file, cmd.id); + if (IS_ERR(ctx)) + return PTR_ERR(ctx); - down(&ctx->file->mutex); - if (ctx->file != file) - result = -EINVAL; - else - result = ib_cm_listen(ctx->cm_id, cmd.service_id, - cmd.service_mask); - - up(&ctx->file->mutex); - ib_ucm_ctx_put(ctx); /* func reference */ + result = ib_cm_listen(ctx->cm_id, cmd.service_id, cmd.service_mask); + ib_ucm_ctx_put(ctx); return result; } @@ -710,18 +640,12 @@ static ssize_t ib_ucm_establish(struct ib_ucm_file *file, if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; - ctx = ib_ucm_ctx_get(cmd.id); - if (!ctx) - return -ENOENT; - - down(&ctx->file->mutex); - if (ctx->file != file) - result = -EINVAL; - else - result = ib_cm_establish(ctx->cm_id); + ctx = ib_ucm_ctx_get(file, cmd.id); + if (IS_ERR(ctx)) + return PTR_ERR(ctx); - up(&ctx->file->mutex); - ib_ucm_ctx_put(ctx); /* func reference */ + result = ib_cm_establish(ctx->cm_id); + ib_ucm_ctx_put(ctx); return result; } @@ -768,8 +692,8 @@ static int ib_ucm_path_get(struct ib_sa_path_rec **path, u64 src) return -EFAULT; } - memcpy(sa_path->dgid.raw, ucm_path.dgid, sizeof(union ib_gid)); - memcpy(sa_path->sgid.raw, ucm_path.sgid, sizeof(union ib_gid)); + memcpy(sa_path->dgid.raw, ucm_path.dgid, sizeof sa_path->dgid); + memcpy(sa_path->sgid.raw, ucm_path.sgid, sizeof sa_path->sgid); sa_path->dlid = ucm_path.dlid; sa_path->slid = ucm_path.slid; @@ -839,25 +763,17 @@ static ssize_t ib_ucm_send_req(struct ib_ucm_file *file, param.max_cm_retries = cmd.max_cm_retries; param.srq = cmd.srq; - ctx = ib_ucm_ctx_get(cmd.id); - if (!ctx) { - result = -ENOENT; - goto done; - } - - down(&ctx->file->mutex); - if (ctx->file != file) - result = -EINVAL; - else + ctx = ib_ucm_ctx_get(file, cmd.id); + if (!IS_ERR(ctx)) { result = ib_send_cm_req(ctx->cm_id, ¶m); + ib_ucm_ctx_put(ctx); + } else + result = PTR_ERR(ctx); - up(&ctx->file->mutex); - ib_ucm_ctx_put(ctx); /* func reference */ done: kfree(param.private_data); kfree(param.primary_path); kfree(param.alternate_path); - return result; } @@ -890,23 +806,14 @@ static ssize_t ib_ucm_send_rep(struct ib_ucm_file *file, param.rnr_retry_count = cmd.rnr_retry_count; param.srq = cmd.srq; - ctx = ib_ucm_ctx_get(cmd.id); - if (!ctx) { - result = -ENOENT; - goto done; - } - - down(&ctx->file->mutex); - if (ctx->file != file) - result = -EINVAL; - else + ctx = ib_ucm_ctx_get(file, cmd.id); + if (!IS_ERR(ctx)) { result = ib_send_cm_rep(ctx->cm_id, ¶m); + ib_ucm_ctx_put(ctx); + } else + result = PTR_ERR(ctx); - up(&ctx->file->mutex); - ib_ucm_ctx_put(ctx); /* func reference */ -done: kfree(param.private_data); - return result; } @@ -928,23 +835,14 @@ static ssize_t ib_ucm_send_private_data(struct ib_ucm_file *file, if (result) return result; - ctx = ib_ucm_ctx_get(cmd.id); - if (!ctx) { - result = -ENOENT; - goto done; - } - - down(&ctx->file->mutex); - if (ctx->file != file) - result = -EINVAL; - else + ctx = ib_ucm_ctx_get(file, cmd.id); + if (!IS_ERR(ctx)) { result = func(ctx->cm_id, private_data, cmd.len); + ib_ucm_ctx_put(ctx); + } else + result = PTR_ERR(ctx); - up(&ctx->file->mutex); - ib_ucm_ctx_put(ctx); /* func reference */ -done: kfree(private_data); - return result; } @@ -995,26 +893,17 @@ static ssize_t ib_ucm_send_info(struct ib_ucm_file *file, if (result) goto done; - ctx = ib_ucm_ctx_get(cmd.id); - if (!ctx) { - result = -ENOENT; - goto done; - } - - down(&ctx->file->mutex); - if (ctx->file != file) - result = -EINVAL; - else - result = func(ctx->cm_id, cmd.status, - info, cmd.info_len, + ctx = ib_ucm_ctx_get(file, cmd.id); + if (!IS_ERR(ctx)) { + result = func(ctx->cm_id, cmd.status, info, cmd.info_len, data, cmd.data_len); + ib_ucm_ctx_put(ctx); + } else + result = PTR_ERR(ctx); - up(&ctx->file->mutex); - ib_ucm_ctx_put(ctx); /* func reference */ done: kfree(data); kfree(info); - return result; } @@ -1048,24 +937,14 @@ static ssize_t ib_ucm_send_mra(struct ib_ucm_file *file, if (result) return result; - ctx = ib_ucm_ctx_get(cmd.id); - if (!ctx) { - result = -ENOENT; - goto done; - } + ctx = ib_ucm_ctx_get(file, cmd.id); + if (!IS_ERR(ctx)) { + result = ib_send_cm_mra(ctx->cm_id, cmd.timeout, data, cmd.len); + ib_ucm_ctx_put(ctx); + } else + result = PTR_ERR(ctx); - down(&ctx->file->mutex); - if (ctx->file != file) - result = -EINVAL; - else - result = ib_send_cm_mra(ctx->cm_id, cmd.timeout, - data, cmd.len); - - up(&ctx->file->mutex); - ib_ucm_ctx_put(ctx); /* func reference */ -done: kfree(data); - return result; } @@ -1090,24 +969,16 @@ static ssize_t ib_ucm_send_lap(struct ib_ucm_file *file, if (result) goto done; - ctx = ib_ucm_ctx_get(cmd.id); - if (!ctx) { - result = -ENOENT; - goto done; - } - - down(&ctx->file->mutex); - if (ctx->file != file) - result = -EINVAL; - else + ctx = ib_ucm_ctx_get(file, cmd.id); + if (!IS_ERR(ctx)) { result = ib_send_cm_lap(ctx->cm_id, path, data, cmd.len); + ib_ucm_ctx_put(ctx); + } else + result = PTR_ERR(ctx); - up(&ctx->file->mutex); - ib_ucm_ctx_put(ctx); /* func reference */ done: kfree(data); kfree(path); - return result; } @@ -1140,24 +1011,16 @@ static ssize_t ib_ucm_send_sidr_req(struct ib_ucm_file *file, param.max_cm_retries = cmd.max_cm_retries; param.pkey = cmd.pkey; - ctx = ib_ucm_ctx_get(cmd.id); - if (!ctx) { - result = -ENOENT; - goto done; - } - - down(&ctx->file->mutex); - if (ctx->file != file) - result = -EINVAL; - else + ctx = ib_ucm_ctx_get(file, cmd.id); + if (!IS_ERR(ctx)) { result = ib_send_cm_sidr_req(ctx->cm_id, ¶m); + ib_ucm_ctx_put(ctx); + } else + result = PTR_ERR(ctx); - up(&ctx->file->mutex); - ib_ucm_ctx_put(ctx); /* func reference */ done: kfree(param.private_data); kfree(param.path); - return result; } @@ -1184,30 +1047,22 @@ static ssize_t ib_ucm_send_sidr_rep(struct ib_ucm_file *file, if (result) goto done; - param.qp_num = cmd.qpn; - param.qkey = cmd.qkey; - param.status = cmd.status; - param.info_length = cmd.info_len; - param.private_data_len = cmd.data_len; - - ctx = ib_ucm_ctx_get(cmd.id); - if (!ctx) { - result = -ENOENT; - goto done; - } + param.qp_num = cmd.qpn; + param.qkey = cmd.qkey; + param.status = cmd.status; + param.info_length = cmd.info_len; + param.private_data_len = cmd.data_len; - down(&ctx->file->mutex); - if (ctx->file != file) - result = -EINVAL; - else + ctx = ib_ucm_ctx_get(file, cmd.id); + if (!IS_ERR(ctx)) { result = ib_send_cm_sidr_rep(ctx->cm_id, ¶m); + ib_ucm_ctx_put(ctx); + } else + result = PTR_ERR(ctx); - up(&ctx->file->mutex); - ib_ucm_ctx_put(ctx); /* func reference */ done: kfree(param.private_data); kfree(param.info); - return result; } @@ -1305,22 +1160,17 @@ static int ib_ucm_close(struct inode *inode, struct file *filp) struct ib_ucm_context *ctx; down(&file->mutex); - while (!list_empty(&file->ctxs)) { ctx = list_entry(file->ctxs.next, struct ib_ucm_context, file_list); - up(&ctx->file->mutex); - ib_ucm_ctx_put(ctx); /* user reference */ + up(&file->mutex); + ib_ucm_destroy_ctx(file, ctx->id); down(&file->mutex); } - up(&file->mutex); - kfree(file); - - ucm_dbg("Deleted struct\n"); return 0; } diff --git a/drivers/infiniband/core/ucm.h b/drivers/infiniband/core/ucm.h index 6d36606151b2..039e8a3783c0 100644 --- a/drivers/infiniband/core/ucm.h +++ b/drivers/infiniband/core/ucm.h @@ -48,9 +48,7 @@ struct ib_ucm_file { struct semaphore mutex; struct file *filp; - /* - * list of pending events - */ + struct list_head ctxs; /* list of active connections */ struct list_head events; /* list of pending events */ wait_queue_head_t poll_wait; @@ -58,12 +56,11 @@ struct ib_ucm_file { struct ib_ucm_context { int id; - int ref; - int error; + wait_queue_head_t wait; + atomic_t ref; struct ib_ucm_file *file; struct ib_cm_id *cm_id; - struct semaphore mutex; struct list_head events; /* list of pending events. */ struct list_head file_list; /* member in file ctx list */ -- cgit v1.2.1 From fe9e08e17af414a5fd8f3141b0fd88677f81a883 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Fri, 19 Aug 2005 13:50:33 -0700 Subject: [PATCH] IB: Add handling for ABORT and STOP RMPP MADs. Add handling for ABORT / STOP RMPP MADs. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/mad_rmpp.c | 309 ++++++++++++++++++++++++++++-------- drivers/infiniband/include/ib_mad.h | 2 + 2 files changed, 246 insertions(+), 65 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c index d68bf7e220f9..43fd805e0265 100644 --- a/drivers/infiniband/core/mad_rmpp.c +++ b/drivers/infiniband/core/mad_rmpp.c @@ -100,6 +100,121 @@ void ib_cancel_rmpp_recvs(struct ib_mad_agent_private *agent) } } +static int data_offset(u8 mgmt_class) +{ + if (mgmt_class == IB_MGMT_CLASS_SUBN_ADM) + return offsetof(struct ib_sa_mad, data); + else if ((mgmt_class >= IB_MGMT_CLASS_VENDOR_RANGE2_START) && + (mgmt_class <= IB_MGMT_CLASS_VENDOR_RANGE2_END)) + return offsetof(struct ib_vendor_mad, data); + else + return offsetof(struct ib_rmpp_mad, data); +} + +static void format_ack(struct ib_rmpp_mad *ack, + struct ib_rmpp_mad *data, + struct mad_rmpp_recv *rmpp_recv) +{ + unsigned long flags; + + memcpy(&ack->mad_hdr, &data->mad_hdr, + data_offset(data->mad_hdr.mgmt_class)); + + ack->mad_hdr.method ^= IB_MGMT_METHOD_RESP; + ack->rmpp_hdr.rmpp_type = IB_MGMT_RMPP_TYPE_ACK; + ib_set_rmpp_flags(&ack->rmpp_hdr, IB_MGMT_RMPP_FLAG_ACTIVE); + + spin_lock_irqsave(&rmpp_recv->lock, flags); + rmpp_recv->last_ack = rmpp_recv->seg_num; + ack->rmpp_hdr.seg_num = cpu_to_be32(rmpp_recv->seg_num); + ack->rmpp_hdr.paylen_newwin = cpu_to_be32(rmpp_recv->newwin); + spin_unlock_irqrestore(&rmpp_recv->lock, flags); +} + +static void ack_recv(struct mad_rmpp_recv *rmpp_recv, + struct ib_mad_recv_wc *recv_wc) +{ + struct ib_mad_send_buf *msg; + struct ib_send_wr *bad_send_wr; + int hdr_len, ret; + + hdr_len = sizeof(struct ib_mad_hdr) + sizeof(struct ib_rmpp_hdr); + msg = ib_create_send_mad(&rmpp_recv->agent->agent, recv_wc->wc->src_qp, + recv_wc->wc->pkey_index, rmpp_recv->ah, 1, + hdr_len, sizeof(struct ib_rmpp_mad) - hdr_len, + GFP_KERNEL); + if (!msg) + return; + + format_ack((struct ib_rmpp_mad *) msg->mad, + (struct ib_rmpp_mad *) recv_wc->recv_buf.mad, rmpp_recv); + ret = ib_post_send_mad(&rmpp_recv->agent->agent, &msg->send_wr, + &bad_send_wr); + if (ret) + ib_free_send_mad(msg); +} + +static int alloc_response_msg(struct ib_mad_agent *agent, + struct ib_mad_recv_wc *recv_wc, + struct ib_mad_send_buf **msg) +{ + struct ib_mad_send_buf *m; + struct ib_ah *ah; + int hdr_len; + + ah = ib_create_ah_from_wc(agent->qp->pd, recv_wc->wc, + recv_wc->recv_buf.grh, agent->port_num); + if (IS_ERR(ah)) + return PTR_ERR(ah); + + hdr_len = sizeof(struct ib_mad_hdr) + sizeof(struct ib_rmpp_hdr); + m = ib_create_send_mad(agent, recv_wc->wc->src_qp, + recv_wc->wc->pkey_index, ah, 1, hdr_len, + sizeof(struct ib_rmpp_mad) - hdr_len, + GFP_KERNEL); + if (IS_ERR(m)) { + ib_destroy_ah(ah); + return PTR_ERR(m); + } + *msg = m; + return 0; +} + +static void free_msg(struct ib_mad_send_buf *msg) +{ + ib_destroy_ah(msg->send_wr.wr.ud.ah); + ib_free_send_mad(msg); +} + +static void nack_recv(struct ib_mad_agent_private *agent, + struct ib_mad_recv_wc *recv_wc, u8 rmpp_status) +{ + struct ib_mad_send_buf *msg; + struct ib_rmpp_mad *rmpp_mad; + struct ib_send_wr *bad_send_wr; + int ret; + + ret = alloc_response_msg(&agent->agent, recv_wc, &msg); + if (ret) + return; + + rmpp_mad = (struct ib_rmpp_mad *) msg->mad; + memcpy(rmpp_mad, recv_wc->recv_buf.mad, + data_offset(recv_wc->recv_buf.mad->mad_hdr.mgmt_class)); + + rmpp_mad->mad_hdr.method ^= IB_MGMT_METHOD_RESP; + rmpp_mad->rmpp_hdr.rmpp_version = IB_MGMT_RMPP_VERSION; + rmpp_mad->rmpp_hdr.rmpp_type = IB_MGMT_RMPP_TYPE_ABORT; + ib_set_rmpp_flags(&rmpp_mad->rmpp_hdr, IB_MGMT_RMPP_FLAG_ACTIVE); + rmpp_mad->rmpp_hdr.rmpp_status = rmpp_status; + rmpp_mad->rmpp_hdr.seg_num = 0; + rmpp_mad->rmpp_hdr.paylen_newwin = 0; + + ret = ib_post_send_mad(&agent->agent, &msg->send_wr, &bad_send_wr); + if (ret) + free_msg(msg); +} + static void recv_timeout_handler(void *data) { struct mad_rmpp_recv *rmpp_recv = data; @@ -115,8 +230,8 @@ static void recv_timeout_handler(void *data) list_del(&rmpp_recv->list); spin_unlock_irqrestore(&rmpp_recv->agent->lock, flags); - /* TODO: send abort. */ rmpp_wc = rmpp_recv->rmpp_wc; + nack_recv(rmpp_recv->agent, rmpp_wc, IB_MGMT_RMPP_STATUS_T2L); destroy_rmpp_recv(rmpp_recv); ib_free_recv_mad(rmpp_wc); } @@ -230,60 +345,6 @@ insert_rmpp_recv(struct ib_mad_agent_private *agent, return cur_rmpp_recv; } -static int data_offset(u8 mgmt_class) -{ - if (mgmt_class == IB_MGMT_CLASS_SUBN_ADM) - return offsetof(struct ib_sa_mad, data); - else if ((mgmt_class >= IB_MGMT_CLASS_VENDOR_RANGE2_START) && - (mgmt_class <= IB_MGMT_CLASS_VENDOR_RANGE2_END)) - return offsetof(struct ib_vendor_mad, data); - else - return offsetof(struct ib_rmpp_mad, data); -} - -static void format_ack(struct ib_rmpp_mad *ack, - struct ib_rmpp_mad *data, - struct mad_rmpp_recv *rmpp_recv) -{ - unsigned long flags; - - memcpy(&ack->mad_hdr, &data->mad_hdr, - data_offset(data->mad_hdr.mgmt_class)); - - ack->mad_hdr.method ^= IB_MGMT_METHOD_RESP; - ack->rmpp_hdr.rmpp_type = IB_MGMT_RMPP_TYPE_ACK; - ib_set_rmpp_flags(&ack->rmpp_hdr, IB_MGMT_RMPP_FLAG_ACTIVE); - - spin_lock_irqsave(&rmpp_recv->lock, flags); - rmpp_recv->last_ack = rmpp_recv->seg_num; - ack->rmpp_hdr.seg_num = cpu_to_be32(rmpp_recv->seg_num); - ack->rmpp_hdr.paylen_newwin = cpu_to_be32(rmpp_recv->newwin); - spin_unlock_irqrestore(&rmpp_recv->lock, flags); -} - -static void ack_recv(struct mad_rmpp_recv *rmpp_recv, - struct ib_mad_recv_wc *recv_wc) -{ - struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; - int hdr_len, ret; - - hdr_len = sizeof(struct ib_mad_hdr) + sizeof(struct ib_rmpp_hdr); - msg = ib_create_send_mad(&rmpp_recv->agent->agent, recv_wc->wc->src_qp, - recv_wc->wc->pkey_index, rmpp_recv->ah, 1, - hdr_len, sizeof(struct ib_rmpp_mad) - hdr_len, - GFP_KERNEL); - if (!msg) - return; - - format_ack((struct ib_rmpp_mad *) msg->mad, - (struct ib_rmpp_mad *) recv_wc->recv_buf.mad, rmpp_recv); - ret = ib_post_send_mad(&rmpp_recv->agent->agent, &msg->send_wr, - &bad_send_wr); - if (ret) - ib_free_send_mad(msg); -} - static inline int get_last_flag(struct ib_mad_recv_buf *seg) { struct ib_rmpp_mad *rmpp_mad; @@ -559,6 +620,34 @@ static int send_next_seg(struct ib_mad_send_wr_private *mad_send_wr) return ib_send_mad(mad_send_wr); } +static void abort_send(struct ib_mad_agent_private *agent, __be64 tid, + u8 rmpp_status) +{ + struct ib_mad_send_wr_private *mad_send_wr; + struct ib_mad_send_wc wc; + unsigned long flags; + + spin_lock_irqsave(&agent->lock, flags); + mad_send_wr = ib_find_send_mad(agent, tid); + if (!mad_send_wr) + goto out; /* Unmatched send */ + + if ((mad_send_wr->last_ack == mad_send_wr->total_seg) || + (!mad_send_wr->timeout) || (mad_send_wr->status != IB_WC_SUCCESS)) + goto out; /* Send is already done */ + + ib_mark_mad_done(mad_send_wr); + spin_unlock_irqrestore(&agent->lock, flags); + + wc.status = IB_WC_REM_ABORT_ERR; + wc.vendor_err = rmpp_status; + wc.wr_id = mad_send_wr->wr_id; + ib_mad_complete_send_wr(mad_send_wr, &wc); + return; +out: + spin_unlock_irqrestore(&agent->lock, flags); +} + static void process_rmpp_ack(struct ib_mad_agent_private *agent, struct ib_mad_recv_wc *mad_recv_wc) { @@ -568,11 +657,21 @@ static void process_rmpp_ack(struct ib_mad_agent_private *agent, int seg_num, newwin, ret; rmpp_mad = (struct ib_rmpp_mad *)mad_recv_wc->recv_buf.mad; - if (rmpp_mad->rmpp_hdr.rmpp_status) + if (rmpp_mad->rmpp_hdr.rmpp_status) { + abort_send(agent, rmpp_mad->mad_hdr.tid, + IB_MGMT_RMPP_STATUS_BAD_STATUS); + nack_recv(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_BAD_STATUS); return; + } seg_num = be32_to_cpu(rmpp_mad->rmpp_hdr.seg_num); newwin = be32_to_cpu(rmpp_mad->rmpp_hdr.paylen_newwin); + if (newwin < seg_num) { + abort_send(agent, rmpp_mad->mad_hdr.tid, + IB_MGMT_RMPP_STATUS_W2S); + nack_recv(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_W2S); + return; + } spin_lock_irqsave(&agent->lock, flags); mad_send_wr = ib_find_send_mad(agent, rmpp_mad->mad_hdr.tid); @@ -583,8 +682,13 @@ static void process_rmpp_ack(struct ib_mad_agent_private *agent, (!mad_send_wr->timeout) || (mad_send_wr->status != IB_WC_SUCCESS)) goto out; /* Send is already done */ - if (seg_num > mad_send_wr->total_seg) - goto out; /* Bad ACK */ + if (seg_num > mad_send_wr->total_seg || seg_num > mad_send_wr->newwin) { + spin_unlock_irqrestore(&agent->lock, flags); + abort_send(agent, rmpp_mad->mad_hdr.tid, + IB_MGMT_RMPP_STATUS_S2B); + nack_recv(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_S2B); + return; + } if (newwin < mad_send_wr->newwin || seg_num < mad_send_wr->last_ack) goto out; /* Old ACK */ @@ -628,6 +732,72 @@ out: spin_unlock_irqrestore(&agent->lock, flags); } +static struct ib_mad_recv_wc * +process_rmpp_data(struct ib_mad_agent_private *agent, + struct ib_mad_recv_wc *mad_recv_wc) +{ + struct ib_rmpp_hdr *rmpp_hdr; + u8 rmpp_status; + + rmpp_hdr = &((struct ib_rmpp_mad *)mad_recv_wc->recv_buf.mad)->rmpp_hdr; + + if (rmpp_hdr->rmpp_status) { + rmpp_status = IB_MGMT_RMPP_STATUS_BAD_STATUS; + goto bad; + } + + if (rmpp_hdr->seg_num == __constant_htonl(1)) { + if (!(ib_get_rmpp_flags(rmpp_hdr) & IB_MGMT_RMPP_FLAG_FIRST)) { + rmpp_status = IB_MGMT_RMPP_STATUS_BAD_SEG; + goto bad; + } + return start_rmpp(agent, mad_recv_wc); + } else { + if (ib_get_rmpp_flags(rmpp_hdr) & IB_MGMT_RMPP_FLAG_FIRST) { + rmpp_status = IB_MGMT_RMPP_STATUS_BAD_SEG; + goto bad; + } + return continue_rmpp(agent, mad_recv_wc); + } +bad: + nack_recv(agent, mad_recv_wc, rmpp_status); + ib_free_recv_mad(mad_recv_wc); + return NULL; +} + +static void process_rmpp_stop(struct ib_mad_agent_private *agent, + struct ib_mad_recv_wc *mad_recv_wc) +{ + struct ib_rmpp_mad *rmpp_mad; + + rmpp_mad = (struct ib_rmpp_mad *)mad_recv_wc->recv_buf.mad; + + if (rmpp_mad->rmpp_hdr.rmpp_status != IB_MGMT_RMPP_STATUS_RESX) { + abort_send(agent, rmpp_mad->mad_hdr.tid, + IB_MGMT_RMPP_STATUS_BAD_STATUS); + nack_recv(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_BAD_STATUS); + } else + abort_send(agent, rmpp_mad->mad_hdr.tid, + rmpp_mad->rmpp_hdr.rmpp_status); +} + +static void process_rmpp_abort(struct ib_mad_agent_private *agent, + struct ib_mad_recv_wc *mad_recv_wc) +{ + struct ib_rmpp_mad *rmpp_mad; + + rmpp_mad = (struct ib_rmpp_mad *)mad_recv_wc->recv_buf.mad; + + if (rmpp_mad->rmpp_hdr.rmpp_status < IB_MGMT_RMPP_STATUS_ABORT_MIN || + rmpp_mad->rmpp_hdr.rmpp_status > IB_MGMT_RMPP_STATUS_ABORT_MAX) { + abort_send(agent, rmpp_mad->mad_hdr.tid, + IB_MGMT_RMPP_STATUS_BAD_STATUS); + nack_recv(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_BAD_STATUS); + } else + abort_send(agent, rmpp_mad->mad_hdr.tid, + rmpp_mad->rmpp_hdr.rmpp_status); +} + struct ib_mad_recv_wc * ib_process_rmpp_recv_wc(struct ib_mad_agent_private *agent, struct ib_mad_recv_wc *mad_recv_wc) @@ -638,23 +808,29 @@ ib_process_rmpp_recv_wc(struct ib_mad_agent_private *agent, if (!(rmpp_mad->rmpp_hdr.rmpp_rtime_flags & IB_MGMT_RMPP_FLAG_ACTIVE)) return mad_recv_wc; - if (rmpp_mad->rmpp_hdr.rmpp_version != IB_MGMT_RMPP_VERSION) + if (rmpp_mad->rmpp_hdr.rmpp_version != IB_MGMT_RMPP_VERSION) { + abort_send(agent, rmpp_mad->mad_hdr.tid, + IB_MGMT_RMPP_STATUS_UNV); + nack_recv(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_UNV); goto out; + } switch (rmpp_mad->rmpp_hdr.rmpp_type) { case IB_MGMT_RMPP_TYPE_DATA: - if (rmpp_mad->rmpp_hdr.seg_num == __constant_htonl(1)) - return start_rmpp(agent, mad_recv_wc); - else - return continue_rmpp(agent, mad_recv_wc); + return process_rmpp_data(agent, mad_recv_wc); case IB_MGMT_RMPP_TYPE_ACK: process_rmpp_ack(agent, mad_recv_wc); break; case IB_MGMT_RMPP_TYPE_STOP: + process_rmpp_stop(agent, mad_recv_wc); + break; case IB_MGMT_RMPP_TYPE_ABORT: - /* TODO: process_rmpp_nack(agent, mad_recv_wc); */ + process_rmpp_abort(agent, mad_recv_wc); break; default: + abort_send(agent, rmpp_mad->mad_hdr.tid, + IB_MGMT_RMPP_STATUS_BADT); + nack_recv(agent, mad_recv_wc, IB_MGMT_RMPP_STATUS_BADT); break; } out: @@ -714,7 +890,10 @@ int ib_process_rmpp_send_wc(struct ib_mad_send_wr_private *mad_send_wr, if (rmpp_mad->rmpp_hdr.rmpp_type != IB_MGMT_RMPP_TYPE_DATA) { msg = (struct ib_mad_send_buf *) (unsigned long) mad_send_wc->wr_id; - ib_free_send_mad(msg); + if (rmpp_mad->rmpp_hdr.rmpp_type == IB_MGMT_RMPP_TYPE_ACK) + ib_free_send_mad(msg); + else + free_msg(msg); return IB_RMPP_RESULT_INTERNAL; /* ACK, STOP, or ABORT */ } diff --git a/drivers/infiniband/include/ib_mad.h b/drivers/infiniband/include/ib_mad.h index 63237805d6af..9fcf6fc09035 100644 --- a/drivers/infiniband/include/ib_mad.h +++ b/drivers/infiniband/include/ib_mad.h @@ -90,6 +90,7 @@ #define IB_MGMT_RMPP_STATUS_SUCCESS 0 #define IB_MGMT_RMPP_STATUS_RESX 1 +#define IB_MGMT_RMPP_STATUS_ABORT_MIN 118 #define IB_MGMT_RMPP_STATUS_T2L 118 #define IB_MGMT_RMPP_STATUS_BAD_LEN 119 #define IB_MGMT_RMPP_STATUS_BAD_SEG 120 @@ -100,6 +101,7 @@ #define IB_MGMT_RMPP_STATUS_UNV 125 #define IB_MGMT_RMPP_STATUS_TMR 126 #define IB_MGMT_RMPP_STATUS_UNSPEC 127 +#define IB_MGMT_RMPP_STATUS_ABORT_MAX 127 #define IB_QP0 0 #define IB_QP1 __constant_htonl(1) -- cgit v1.2.1 From 1ad62a19f177e61d4dde111ba35fb4badd0c2106 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Wed, 24 Aug 2005 14:41:51 -0700 Subject: [PATCH] IPoIB: Fix device removal race Currently we may have work scheduled in default kernel workqueue when the device is going down. The device could get freed before this workqueue gets serviced. I am actually seeing this causing system hangs. The following patch fixes this by using ipoib_workqueue which gets flushed when the device is going down. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 57c3ac98991f..0e8ac138e355 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -672,7 +672,7 @@ static void ipoib_set_mcast_list(struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); - schedule_work(&priv->restart_task); + queue_work(ipoib_workqueue, &priv->restart_task); } static void ipoib_neigh_destructor(struct neighbour *n) -- cgit v1.2.1 From a4d61e84804f3b14cc35c5e2af768a07c0f64ef6 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 25 Aug 2005 13:40:04 -0700 Subject: [PATCH] IB: move include files to include/rdma Move the InfiniBand headers from drivers/infiniband/include to include/rdma. This allows InfiniBand-using code to live elsewhere, and lets us remove the ugly EXTRA_CFLAGS include path from the InfiniBand Makefiles. Signed-off-by: Roland Dreier --- drivers/infiniband/core/Makefile | 2 - drivers/infiniband/core/agent.c | 2 +- drivers/infiniband/core/cache.c | 2 +- drivers/infiniband/core/cm.c | 4 +- drivers/infiniband/core/cm_msgs.h | 2 +- drivers/infiniband/core/core_priv.h | 2 +- drivers/infiniband/core/fmr_pool.c | 2 +- drivers/infiniband/core/mad_priv.h | 4 +- drivers/infiniband/core/packer.c | 2 +- drivers/infiniband/core/sa_query.c | 4 +- drivers/infiniband/core/smi.c | 2 +- drivers/infiniband/core/sysfs.c | 2 +- drivers/infiniband/core/ucm.h | 4 +- drivers/infiniband/core/ud_header.c | 2 +- drivers/infiniband/core/user_mad.c | 4 +- drivers/infiniband/core/uverbs.h | 4 +- drivers/infiniband/core/verbs.c | 4 +- drivers/infiniband/hw/mthca/Makefile | 2 - drivers/infiniband/hw/mthca/mthca_av.c | 4 +- drivers/infiniband/hw/mthca/mthca_cmd.c | 2 +- drivers/infiniband/hw/mthca/mthca_cmd.h | 2 +- drivers/infiniband/hw/mthca/mthca_cq.c | 2 +- drivers/infiniband/hw/mthca/mthca_mad.c | 6 +- drivers/infiniband/hw/mthca/mthca_provider.c | 2 +- drivers/infiniband/hw/mthca/mthca_provider.h | 4 +- drivers/infiniband/hw/mthca/mthca_qp.c | 6 +- drivers/infiniband/include/ib_cache.h | 105 -- drivers/infiniband/include/ib_cm.h | 568 ---------- drivers/infiniband/include/ib_fmr_pool.h | 93 -- drivers/infiniband/include/ib_mad.h | 579 ---------- drivers/infiniband/include/ib_pack.h | 245 ----- drivers/infiniband/include/ib_sa.h | 373 ------- drivers/infiniband/include/ib_smi.h | 94 -- drivers/infiniband/include/ib_user_cm.h | 328 ------ drivers/infiniband/include/ib_user_mad.h | 137 --- drivers/infiniband/include/ib_user_verbs.h | 422 -------- drivers/infiniband/include/ib_verbs.h | 1461 -------------------------- drivers/infiniband/ulp/ipoib/Makefile | 2 - drivers/infiniband/ulp/ipoib/ipoib.h | 6 +- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 2 +- drivers/infiniband/ulp/ipoib/ipoib_verbs.c | 2 +- 41 files changed, 42 insertions(+), 4453 deletions(-) delete mode 100644 drivers/infiniband/include/ib_cache.h delete mode 100644 drivers/infiniband/include/ib_cm.h delete mode 100644 drivers/infiniband/include/ib_fmr_pool.h delete mode 100644 drivers/infiniband/include/ib_mad.h delete mode 100644 drivers/infiniband/include/ib_pack.h delete mode 100644 drivers/infiniband/include/ib_sa.h delete mode 100644 drivers/infiniband/include/ib_smi.h delete mode 100644 drivers/infiniband/include/ib_user_cm.h delete mode 100644 drivers/infiniband/include/ib_user_mad.h delete mode 100644 drivers/infiniband/include/ib_user_verbs.h delete mode 100644 drivers/infiniband/include/ib_verbs.h (limited to 'drivers') diff --git a/drivers/infiniband/core/Makefile b/drivers/infiniband/core/Makefile index 10be36731ed7..678a7e097f32 100644 --- a/drivers/infiniband/core/Makefile +++ b/drivers/infiniband/core/Makefile @@ -1,5 +1,3 @@ -EXTRA_CFLAGS += -Idrivers/infiniband/include - obj-$(CONFIG_INFINIBAND) += ib_core.o ib_mad.o ib_sa.o \ ib_cm.o ib_umad.o ib_ucm.o obj-$(CONFIG_INFINIBAND_USER_VERBS) += ib_uverbs.o diff --git a/drivers/infiniband/core/agent.c b/drivers/infiniband/core/agent.c index 3d36feb8c5ba..5ac86f566dc0 100644 --- a/drivers/infiniband/core/agent.c +++ b/drivers/infiniband/core/agent.c @@ -41,7 +41,7 @@ #include -#include +#include #include "smi.h" #include "agent_priv.h" diff --git a/drivers/infiniband/core/cache.c b/drivers/infiniband/core/cache.c index 9376e53f50f2..f014e639088c 100644 --- a/drivers/infiniband/core/cache.c +++ b/drivers/infiniband/core/cache.c @@ -39,7 +39,7 @@ #include #include -#include +#include #include "core_priv.h" diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 781be773a186..4de93ba274a6 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -43,8 +43,8 @@ #include #include -#include -#include +#include +#include #include "cm_msgs.h" MODULE_AUTHOR("Sean Hefty"); diff --git a/drivers/infiniband/core/cm_msgs.h b/drivers/infiniband/core/cm_msgs.h index 807a9fbb38f5..813ab70bf6d5 100644 --- a/drivers/infiniband/core/cm_msgs.h +++ b/drivers/infiniband/core/cm_msgs.h @@ -34,7 +34,7 @@ #if !defined(CM_MSGS_H) #define CM_MSGS_H -#include +#include /* * Parameters to routines below should be in network-byte order, and values diff --git a/drivers/infiniband/core/core_priv.h b/drivers/infiniband/core/core_priv.h index 797049626ff6..7ad47a4b166b 100644 --- a/drivers/infiniband/core/core_priv.h +++ b/drivers/infiniband/core/core_priv.h @@ -38,7 +38,7 @@ #include #include -#include +#include int ib_device_register_sysfs(struct ib_device *device); void ib_device_unregister_sysfs(struct ib_device *device); diff --git a/drivers/infiniband/core/fmr_pool.c b/drivers/infiniband/core/fmr_pool.c index 1f7374927f38..d34a6f1c4f4c 100644 --- a/drivers/infiniband/core/fmr_pool.c +++ b/drivers/infiniband/core/fmr_pool.c @@ -39,7 +39,7 @@ #include #include -#include +#include #include "core_priv.h" diff --git a/drivers/infiniband/core/mad_priv.h b/drivers/infiniband/core/mad_priv.h index 807b0f366353..f1ba794e0daa 100644 --- a/drivers/infiniband/core/mad_priv.h +++ b/drivers/infiniband/core/mad_priv.h @@ -40,8 +40,8 @@ #include #include #include -#include -#include +#include +#include #define PFX "ib_mad: " diff --git a/drivers/infiniband/core/packer.c b/drivers/infiniband/core/packer.c index ed1684b09f92..35df5010e723 100644 --- a/drivers/infiniband/core/packer.c +++ b/drivers/infiniband/core/packer.c @@ -33,7 +33,7 @@ * $Id: packer.c 1349 2004-12-16 21:09:43Z roland $ */ -#include +#include static u64 value_read(int offset, int size, void *structure) { diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c index b03bed2ed87a..126ac80db7b8 100644 --- a/drivers/infiniband/core/sa_query.c +++ b/drivers/infiniband/core/sa_query.c @@ -44,8 +44,8 @@ #include #include -#include -#include +#include +#include MODULE_AUTHOR("Roland Dreier"); MODULE_DESCRIPTION("InfiniBand subnet administration query support"); diff --git a/drivers/infiniband/core/smi.c b/drivers/infiniband/core/smi.c index 1c0d733c3fce..35852e794e26 100644 --- a/drivers/infiniband/core/smi.c +++ b/drivers/infiniband/core/smi.c @@ -37,7 +37,7 @@ * $Id: smi.c 1389 2004-12-27 22:56:47Z roland $ */ -#include +#include #include "smi.h" /* diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index bf7334e7fac6..fae1c2dcee51 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -36,7 +36,7 @@ #include "core_priv.h" -#include +#include struct ib_port { struct kobject kobj; diff --git a/drivers/infiniband/core/ucm.h b/drivers/infiniband/core/ucm.h index 039e8a3783c0..c8819b928a1b 100644 --- a/drivers/infiniband/core/ucm.h +++ b/drivers/infiniband/core/ucm.h @@ -40,8 +40,8 @@ #include #include -#include -#include +#include +#include #define IB_UCM_CM_ID_INVALID 0xffffffff diff --git a/drivers/infiniband/core/ud_header.c b/drivers/infiniband/core/ud_header.c index 89cd76d7c5a5..527b23450ab3 100644 --- a/drivers/infiniband/core/ud_header.c +++ b/drivers/infiniband/core/ud_header.c @@ -35,7 +35,7 @@ #include -#include +#include #define STRUCT_FIELD(header, field) \ .struct_offset_bytes = offsetof(struct ib_unpacked_ ## header, field), \ diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index 16d91f187758..7c2f03057ddb 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -49,8 +49,8 @@ #include #include -#include -#include +#include +#include MODULE_AUTHOR("Roland Dreier"); MODULE_DESCRIPTION("InfiniBand userspace MAD packet access"); diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h index db161810c0c0..180b3d4765e4 100644 --- a/drivers/infiniband/core/uverbs.h +++ b/drivers/infiniband/core/uverbs.h @@ -45,8 +45,8 @@ #include #include -#include -#include +#include +#include struct ib_uverbs_device { int devnum; diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c index c035510c5a36..5081d903e561 100644 --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -41,8 +41,8 @@ #include #include -#include -#include +#include +#include /* Protection domains */ diff --git a/drivers/infiniband/hw/mthca/Makefile b/drivers/infiniband/hw/mthca/Makefile index 1eb87408e069..c44f7bae5424 100644 --- a/drivers/infiniband/hw/mthca/Makefile +++ b/drivers/infiniband/hw/mthca/Makefile @@ -1,5 +1,3 @@ -EXTRA_CFLAGS += -Idrivers/infiniband/include - ifdef CONFIG_INFINIBAND_MTHCA_DEBUG EXTRA_CFLAGS += -DDEBUG endif diff --git a/drivers/infiniband/hw/mthca/mthca_av.c b/drivers/infiniband/hw/mthca/mthca_av.c index e596210f11b3..889e85096736 100644 --- a/drivers/infiniband/hw/mthca/mthca_av.c +++ b/drivers/infiniband/hw/mthca/mthca_av.c @@ -35,8 +35,8 @@ #include -#include -#include +#include +#include #include "mthca_dev.h" diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index 60e4b213635a..cc758a2d2bc6 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -37,7 +37,7 @@ #include #include #include -#include +#include #include "mthca_dev.h" #include "mthca_config_reg.h" diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.h b/drivers/infiniband/hw/mthca/mthca_cmd.h index ef2a765d6953..65f976a13e02 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.h +++ b/drivers/infiniband/hw/mthca/mthca_cmd.h @@ -36,7 +36,7 @@ #ifndef MTHCA_CMD_H #define MTHCA_CMD_H -#include +#include #define MTHCA_MAILBOX_SIZE 4096 diff --git a/drivers/infiniband/hw/mthca/mthca_cq.c b/drivers/infiniband/hw/mthca/mthca_cq.c index 5ece609c2ee0..8600b6c3e0c2 100644 --- a/drivers/infiniband/hw/mthca/mthca_cq.c +++ b/drivers/infiniband/hw/mthca/mthca_cq.c @@ -39,7 +39,7 @@ #include #include -#include +#include #include "mthca_dev.h" #include "mthca_cmd.h" diff --git a/drivers/infiniband/hw/mthca/mthca_mad.c b/drivers/infiniband/hw/mthca/mthca_mad.c index 64fa78722cf6..9804174f7f3c 100644 --- a/drivers/infiniband/hw/mthca/mthca_mad.c +++ b/drivers/infiniband/hw/mthca/mthca_mad.c @@ -34,9 +34,9 @@ * $Id: mthca_mad.c 1349 2004-12-16 21:09:43Z roland $ */ -#include -#include -#include +#include +#include +#include #include "mthca_dev.h" #include "mthca_cmd.h" diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 23ceb26af8fe..1c1c2e230871 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -36,7 +36,7 @@ * $Id: mthca_provider.c 1397 2004-12-28 05:09:00Z roland $ */ -#include +#include #include #include "mthca_dev.h" diff --git a/drivers/infiniband/hw/mthca/mthca_provider.h b/drivers/infiniband/hw/mthca/mthca_provider.h index 024015678c8a..bcd4b01a339c 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.h +++ b/drivers/infiniband/hw/mthca/mthca_provider.h @@ -37,8 +37,8 @@ #ifndef MTHCA_PROVIDER_H #define MTHCA_PROVIDER_H -#include -#include +#include +#include #define MTHCA_MPT_FLAG_ATOMIC (1 << 14) #define MTHCA_MPT_FLAG_REMOTE_WRITE (1 << 13) diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 7607b9800736..0164b84d4ec6 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -37,9 +37,9 @@ #include -#include -#include -#include +#include +#include +#include #include "mthca_dev.h" #include "mthca_cmd.h" diff --git a/drivers/infiniband/include/ib_cache.h b/drivers/infiniband/include/ib_cache.h deleted file mode 100644 index fff031bc95df..000000000000 --- a/drivers/infiniband/include/ib_cache.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (c) 2004 Topspin Communications. All rights reserved. - * Copyright (c) 2005 Intel Corporation. All rights reserved. - * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * $Id: ib_cache.h 1349 2004-12-16 21:09:43Z roland $ - */ - -#ifndef _IB_CACHE_H -#define _IB_CACHE_H - -#include - -/** - * ib_get_cached_gid - Returns a cached GID table entry - * @device: The device to query. - * @port_num: The port number of the device to query. - * @index: The index into the cached GID table to query. - * @gid: The GID value found at the specified index. - * - * ib_get_cached_gid() fetches the specified GID table entry stored in - * the local software cache. - */ -int ib_get_cached_gid(struct ib_device *device, - u8 port_num, - int index, - union ib_gid *gid); - -/** - * ib_find_cached_gid - Returns the port number and GID table index where - * a specified GID value occurs. - * @device: The device to query. - * @gid: The GID value to search for. - * @port_num: The port number of the device where the GID value was found. - * @index: The index into the cached GID table where the GID was found. This - * parameter may be NULL. - * - * ib_find_cached_gid() searches for the specified GID value in - * the local software cache. - */ -int ib_find_cached_gid(struct ib_device *device, - union ib_gid *gid, - u8 *port_num, - u16 *index); - -/** - * ib_get_cached_pkey - Returns a cached PKey table entry - * @device: The device to query. - * @port_num: The port number of the device to query. - * @index: The index into the cached PKey table to query. - * @pkey: The PKey value found at the specified index. - * - * ib_get_cached_pkey() fetches the specified PKey table entry stored in - * the local software cache. - */ -int ib_get_cached_pkey(struct ib_device *device_handle, - u8 port_num, - int index, - u16 *pkey); - -/** - * ib_find_cached_pkey - Returns the PKey table index where a specified - * PKey value occurs. - * @device: The device to query. - * @port_num: The port number of the device to search for the PKey. - * @pkey: The PKey value to search for. - * @index: The index into the cached PKey table where the PKey was found. - * - * ib_find_cached_pkey() searches the specified PKey table in - * the local software cache. - */ -int ib_find_cached_pkey(struct ib_device *device, - u8 port_num, - u16 pkey, - u16 *index); - -#endif /* _IB_CACHE_H */ diff --git a/drivers/infiniband/include/ib_cm.h b/drivers/infiniband/include/ib_cm.h deleted file mode 100644 index 8202ad2e6435..000000000000 --- a/drivers/infiniband/include/ib_cm.h +++ /dev/null @@ -1,568 +0,0 @@ -/* - * Copyright (c) 2004 Intel Corporation. All rights reserved. - * Copyright (c) 2004 Topspin Corporation. All rights reserved. - * Copyright (c) 2004 Voltaire Corporation. All rights reserved. - * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * $Id: ib_cm.h 2730 2005-06-28 16:43:03Z sean.hefty $ - */ -#if !defined(IB_CM_H) -#define IB_CM_H - -#include -#include - -enum ib_cm_state { - IB_CM_IDLE, - IB_CM_LISTEN, - IB_CM_REQ_SENT, - IB_CM_REQ_RCVD, - IB_CM_MRA_REQ_SENT, - IB_CM_MRA_REQ_RCVD, - IB_CM_REP_SENT, - IB_CM_REP_RCVD, - IB_CM_MRA_REP_SENT, - IB_CM_MRA_REP_RCVD, - IB_CM_ESTABLISHED, - IB_CM_DREQ_SENT, - IB_CM_DREQ_RCVD, - IB_CM_TIMEWAIT, - IB_CM_SIDR_REQ_SENT, - IB_CM_SIDR_REQ_RCVD -}; - -enum ib_cm_lap_state { - IB_CM_LAP_IDLE, - IB_CM_LAP_SENT, - IB_CM_LAP_RCVD, - IB_CM_MRA_LAP_SENT, - IB_CM_MRA_LAP_RCVD, -}; - -enum ib_cm_event_type { - IB_CM_REQ_ERROR, - IB_CM_REQ_RECEIVED, - IB_CM_REP_ERROR, - IB_CM_REP_RECEIVED, - IB_CM_RTU_RECEIVED, - IB_CM_USER_ESTABLISHED, - IB_CM_DREQ_ERROR, - IB_CM_DREQ_RECEIVED, - IB_CM_DREP_RECEIVED, - IB_CM_TIMEWAIT_EXIT, - IB_CM_MRA_RECEIVED, - IB_CM_REJ_RECEIVED, - IB_CM_LAP_ERROR, - IB_CM_LAP_RECEIVED, - IB_CM_APR_RECEIVED, - IB_CM_SIDR_REQ_ERROR, - IB_CM_SIDR_REQ_RECEIVED, - IB_CM_SIDR_REP_RECEIVED -}; - -enum ib_cm_data_size { - IB_CM_REQ_PRIVATE_DATA_SIZE = 92, - IB_CM_MRA_PRIVATE_DATA_SIZE = 222, - IB_CM_REJ_PRIVATE_DATA_SIZE = 148, - IB_CM_REP_PRIVATE_DATA_SIZE = 196, - IB_CM_RTU_PRIVATE_DATA_SIZE = 224, - IB_CM_DREQ_PRIVATE_DATA_SIZE = 220, - IB_CM_DREP_PRIVATE_DATA_SIZE = 224, - IB_CM_REJ_ARI_LENGTH = 72, - IB_CM_LAP_PRIVATE_DATA_SIZE = 168, - IB_CM_APR_PRIVATE_DATA_SIZE = 148, - IB_CM_APR_INFO_LENGTH = 72, - IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE = 216, - IB_CM_SIDR_REP_PRIVATE_DATA_SIZE = 136, - IB_CM_SIDR_REP_INFO_LENGTH = 72 -}; - -struct ib_cm_id; - -struct ib_cm_req_event_param { - struct ib_cm_id *listen_id; - struct ib_device *device; - u8 port; - - struct ib_sa_path_rec *primary_path; - struct ib_sa_path_rec *alternate_path; - - __be64 remote_ca_guid; - u32 remote_qkey; - u32 remote_qpn; - enum ib_qp_type qp_type; - - u32 starting_psn; - u8 responder_resources; - u8 initiator_depth; - unsigned int local_cm_response_timeout:5; - unsigned int flow_control:1; - unsigned int remote_cm_response_timeout:5; - unsigned int retry_count:3; - unsigned int rnr_retry_count:3; - unsigned int srq:1; -}; - -struct ib_cm_rep_event_param { - __be64 remote_ca_guid; - u32 remote_qkey; - u32 remote_qpn; - u32 starting_psn; - u8 responder_resources; - u8 initiator_depth; - unsigned int target_ack_delay:5; - unsigned int failover_accepted:2; - unsigned int flow_control:1; - unsigned int rnr_retry_count:3; - unsigned int srq:1; -}; - -enum ib_cm_rej_reason { - IB_CM_REJ_NO_QP = 1, - IB_CM_REJ_NO_EEC = 2, - IB_CM_REJ_NO_RESOURCES = 3, - IB_CM_REJ_TIMEOUT = 4, - IB_CM_REJ_UNSUPPORTED = 5, - IB_CM_REJ_INVALID_COMM_ID = 6, - IB_CM_REJ_INVALID_COMM_INSTANCE = 7, - IB_CM_REJ_INVALID_SERVICE_ID = 8, - IB_CM_REJ_INVALID_TRANSPORT_TYPE = 9, - IB_CM_REJ_STALE_CONN = 10, - IB_CM_REJ_RDC_NOT_EXIST = 11, - IB_CM_REJ_INVALID_GID = 12, - IB_CM_REJ_INVALID_LID = 13, - IB_CM_REJ_INVALID_SL = 14, - IB_CM_REJ_INVALID_TRAFFIC_CLASS = 15, - IB_CM_REJ_INVALID_HOP_LIMIT = 16, - IB_CM_REJ_INVALID_PACKET_RATE = 17, - IB_CM_REJ_INVALID_ALT_GID = 18, - IB_CM_REJ_INVALID_ALT_LID = 19, - IB_CM_REJ_INVALID_ALT_SL = 20, - IB_CM_REJ_INVALID_ALT_TRAFFIC_CLASS = 21, - IB_CM_REJ_INVALID_ALT_HOP_LIMIT = 22, - IB_CM_REJ_INVALID_ALT_PACKET_RATE = 23, - IB_CM_REJ_PORT_CM_REDIRECT = 24, - IB_CM_REJ_PORT_REDIRECT = 25, - IB_CM_REJ_INVALID_MTU = 26, - IB_CM_REJ_INSUFFICIENT_RESP_RESOURCES = 27, - IB_CM_REJ_CONSUMER_DEFINED = 28, - IB_CM_REJ_INVALID_RNR_RETRY = 29, - IB_CM_REJ_DUPLICATE_LOCAL_COMM_ID = 30, - IB_CM_REJ_INVALID_CLASS_VERSION = 31, - IB_CM_REJ_INVALID_FLOW_LABEL = 32, - IB_CM_REJ_INVALID_ALT_FLOW_LABEL = 33 -}; - -struct ib_cm_rej_event_param { - enum ib_cm_rej_reason reason; - void *ari; - u8 ari_length; -}; - -struct ib_cm_mra_event_param { - u8 service_timeout; -}; - -struct ib_cm_lap_event_param { - struct ib_sa_path_rec *alternate_path; -}; - -enum ib_cm_apr_status { - IB_CM_APR_SUCCESS, - IB_CM_APR_INVALID_COMM_ID, - IB_CM_APR_UNSUPPORTED, - IB_CM_APR_REJECT, - IB_CM_APR_REDIRECT, - IB_CM_APR_IS_CURRENT, - IB_CM_APR_INVALID_QPN_EECN, - IB_CM_APR_INVALID_LID, - IB_CM_APR_INVALID_GID, - IB_CM_APR_INVALID_FLOW_LABEL, - IB_CM_APR_INVALID_TCLASS, - IB_CM_APR_INVALID_HOP_LIMIT, - IB_CM_APR_INVALID_PACKET_RATE, - IB_CM_APR_INVALID_SL -}; - -struct ib_cm_apr_event_param { - enum ib_cm_apr_status ap_status; - void *apr_info; - u8 info_len; -}; - -struct ib_cm_sidr_req_event_param { - struct ib_cm_id *listen_id; - struct ib_device *device; - u8 port; - u16 pkey; -}; - -enum ib_cm_sidr_status { - IB_SIDR_SUCCESS, - IB_SIDR_UNSUPPORTED, - IB_SIDR_REJECT, - IB_SIDR_NO_QP, - IB_SIDR_REDIRECT, - IB_SIDR_UNSUPPORTED_VERSION -}; - -struct ib_cm_sidr_rep_event_param { - enum ib_cm_sidr_status status; - u32 qkey; - u32 qpn; - void *info; - u8 info_len; - -}; - -struct ib_cm_event { - enum ib_cm_event_type event; - union { - struct ib_cm_req_event_param req_rcvd; - struct ib_cm_rep_event_param rep_rcvd; - /* No data for RTU received events. */ - struct ib_cm_rej_event_param rej_rcvd; - struct ib_cm_mra_event_param mra_rcvd; - struct ib_cm_lap_event_param lap_rcvd; - struct ib_cm_apr_event_param apr_rcvd; - /* No data for DREQ/DREP received events. */ - struct ib_cm_sidr_req_event_param sidr_req_rcvd; - struct ib_cm_sidr_rep_event_param sidr_rep_rcvd; - enum ib_wc_status send_status; - } param; - - void *private_data; -}; - -/** - * ib_cm_handler - User-defined callback to process communication events. - * @cm_id: Communication identifier associated with the reported event. - * @event: Information about the communication event. - * - * IB_CM_REQ_RECEIVED and IB_CM_SIDR_REQ_RECEIVED communication events - * generated as a result of listen requests result in the allocation of a - * new @cm_id. The new @cm_id is returned to the user through this callback. - * Clients are responsible for destroying the new @cm_id. For peer-to-peer - * IB_CM_REQ_RECEIVED and all other events, the returned @cm_id corresponds - * to a user's existing communication identifier. - * - * Users may not call ib_destroy_cm_id while in the context of this callback; - * however, returning a non-zero value instructs the communication manager to - * destroy the @cm_id after the callback completes. - */ -typedef int (*ib_cm_handler)(struct ib_cm_id *cm_id, - struct ib_cm_event *event); - -struct ib_cm_id { - ib_cm_handler cm_handler; - void *context; - __be64 service_id; - __be64 service_mask; - enum ib_cm_state state; /* internal CM/debug use */ - enum ib_cm_lap_state lap_state; /* internal CM/debug use */ - __be32 local_id; - __be32 remote_id; -}; - -/** - * ib_create_cm_id - Allocate a communication identifier. - * @cm_handler: Callback invoked to notify the user of CM events. - * @context: User specified context associated with the communication - * identifier. - * - * Communication identifiers are used to track connection states, service - * ID resolution requests, and listen requests. - */ -struct ib_cm_id *ib_create_cm_id(ib_cm_handler cm_handler, - void *context); - -/** - * ib_destroy_cm_id - Destroy a connection identifier. - * @cm_id: Connection identifier to destroy. - * - * This call blocks until the connection identifier is destroyed. - */ -void ib_destroy_cm_id(struct ib_cm_id *cm_id); - -#define IB_SERVICE_ID_AGN_MASK __constant_cpu_to_be64(0xFF00000000000000ULL) -#define IB_CM_ASSIGN_SERVICE_ID __constant_cpu_to_be64(0x0200000000000000ULL) - -/** - * ib_cm_listen - Initiates listening on the specified service ID for - * connection and service ID resolution requests. - * @cm_id: Connection identifier associated with the listen request. - * @service_id: Service identifier matched against incoming connection - * and service ID resolution requests. The service ID should be specified - * network-byte order. If set to IB_CM_ASSIGN_SERVICE_ID, the CM will - * assign a service ID to the caller. - * @service_mask: Mask applied to service ID used to listen across a - * range of service IDs. If set to 0, the service ID is matched - * exactly. This parameter is ignored if %service_id is set to - * IB_CM_ASSIGN_SERVICE_ID. - */ -int ib_cm_listen(struct ib_cm_id *cm_id, - __be64 service_id, - __be64 service_mask); - -struct ib_cm_req_param { - struct ib_sa_path_rec *primary_path; - struct ib_sa_path_rec *alternate_path; - __be64 service_id; - u32 qp_num; - enum ib_qp_type qp_type; - u32 starting_psn; - const void *private_data; - u8 private_data_len; - u8 peer_to_peer; - u8 responder_resources; - u8 initiator_depth; - u8 remote_cm_response_timeout; - u8 flow_control; - u8 local_cm_response_timeout; - u8 retry_count; - u8 rnr_retry_count; - u8 max_cm_retries; - u8 srq; -}; - -/** - * ib_send_cm_req - Sends a connection request to the remote node. - * @cm_id: Connection identifier that will be associated with the - * connection request. - * @param: Connection request information needed to establish the - * connection. - */ -int ib_send_cm_req(struct ib_cm_id *cm_id, - struct ib_cm_req_param *param); - -struct ib_cm_rep_param { - u32 qp_num; - u32 starting_psn; - const void *private_data; - u8 private_data_len; - u8 responder_resources; - u8 initiator_depth; - u8 target_ack_delay; - u8 failover_accepted; - u8 flow_control; - u8 rnr_retry_count; - u8 srq; -}; - -/** - * ib_send_cm_rep - Sends a connection reply in response to a connection - * request. - * @cm_id: Connection identifier that will be associated with the - * connection request. - * @param: Connection reply information needed to establish the - * connection. - */ -int ib_send_cm_rep(struct ib_cm_id *cm_id, - struct ib_cm_rep_param *param); - -/** - * ib_send_cm_rtu - Sends a connection ready to use message in response - * to a connection reply message. - * @cm_id: Connection identifier associated with the connection request. - * @private_data: Optional user-defined private data sent with the - * ready to use message. - * @private_data_len: Size of the private data buffer, in bytes. - */ -int ib_send_cm_rtu(struct ib_cm_id *cm_id, - const void *private_data, - u8 private_data_len); - -/** - * ib_send_cm_dreq - Sends a disconnection request for an existing - * connection. - * @cm_id: Connection identifier associated with the connection being - * released. - * @private_data: Optional user-defined private data sent with the - * disconnection request message. - * @private_data_len: Size of the private data buffer, in bytes. - */ -int ib_send_cm_dreq(struct ib_cm_id *cm_id, - const void *private_data, - u8 private_data_len); - -/** - * ib_send_cm_drep - Sends a disconnection reply to a disconnection request. - * @cm_id: Connection identifier associated with the connection being - * released. - * @private_data: Optional user-defined private data sent with the - * disconnection reply message. - * @private_data_len: Size of the private data buffer, in bytes. - * - * If the cm_id is in the correct state, the CM will transition the connection - * to the timewait state, even if an error occurs sending the DREP message. - */ -int ib_send_cm_drep(struct ib_cm_id *cm_id, - const void *private_data, - u8 private_data_len); - -/** - * ib_cm_establish - Forces a connection state to established. - * @cm_id: Connection identifier to transition to established. - * - * This routine should be invoked by users who receive messages on a - * connected QP before an RTU has been received. - */ -int ib_cm_establish(struct ib_cm_id *cm_id); - -/** - * ib_send_cm_rej - Sends a connection rejection message to the - * remote node. - * @cm_id: Connection identifier associated with the connection being - * rejected. - * @reason: Reason for the connection request rejection. - * @ari: Optional additional rejection information. - * @ari_length: Size of the additional rejection information, in bytes. - * @private_data: Optional user-defined private data sent with the - * rejection message. - * @private_data_len: Size of the private data buffer, in bytes. - */ -int ib_send_cm_rej(struct ib_cm_id *cm_id, - enum ib_cm_rej_reason reason, - void *ari, - u8 ari_length, - const void *private_data, - u8 private_data_len); - -/** - * ib_send_cm_mra - Sends a message receipt acknowledgement to a connection - * message. - * @cm_id: Connection identifier associated with the connection message. - * @service_timeout: The maximum time required for the sender to reply to - * to the connection message. - * @private_data: Optional user-defined private data sent with the - * message receipt acknowledgement. - * @private_data_len: Size of the private data buffer, in bytes. - */ -int ib_send_cm_mra(struct ib_cm_id *cm_id, - u8 service_timeout, - const void *private_data, - u8 private_data_len); - -/** - * ib_send_cm_lap - Sends a load alternate path request. - * @cm_id: Connection identifier associated with the load alternate path - * message. - * @alternate_path: A path record that identifies the alternate path to - * load. - * @private_data: Optional user-defined private data sent with the - * load alternate path message. - * @private_data_len: Size of the private data buffer, in bytes. - */ -int ib_send_cm_lap(struct ib_cm_id *cm_id, - struct ib_sa_path_rec *alternate_path, - const void *private_data, - u8 private_data_len); - -/** - * ib_cm_init_qp_attr - Initializes the QP attributes for use in transitioning - * to a specified QP state. - * @cm_id: Communication identifier associated with the QP attributes to - * initialize. - * @qp_attr: On input, specifies the desired QP state. On output, the - * mandatory and desired optional attributes will be set in order to - * modify the QP to the specified state. - * @qp_attr_mask: The QP attribute mask that may be used to transition the - * QP to the specified state. - * - * Users must set the @qp_attr->qp_state to the desired QP state. This call - * will set all required attributes for the given transition, along with - * known optional attributes. Users may override the attributes returned from - * this call before calling ib_modify_qp. - */ -int ib_cm_init_qp_attr(struct ib_cm_id *cm_id, - struct ib_qp_attr *qp_attr, - int *qp_attr_mask); - -/** - * ib_send_cm_apr - Sends an alternate path response message in response to - * a load alternate path request. - * @cm_id: Connection identifier associated with the alternate path response. - * @status: Reply status sent with the alternate path response. - * @info: Optional additional information sent with the alternate path - * response. - * @info_length: Size of the additional information, in bytes. - * @private_data: Optional user-defined private data sent with the - * alternate path response message. - * @private_data_len: Size of the private data buffer, in bytes. - */ -int ib_send_cm_apr(struct ib_cm_id *cm_id, - enum ib_cm_apr_status status, - void *info, - u8 info_length, - const void *private_data, - u8 private_data_len); - -struct ib_cm_sidr_req_param { - struct ib_sa_path_rec *path; - __be64 service_id; - int timeout_ms; - const void *private_data; - u8 private_data_len; - u8 max_cm_retries; - u16 pkey; -}; - -/** - * ib_send_cm_sidr_req - Sends a service ID resolution request to the - * remote node. - * @cm_id: Communication identifier that will be associated with the - * service ID resolution request. - * @param: Service ID resolution request information. - */ -int ib_send_cm_sidr_req(struct ib_cm_id *cm_id, - struct ib_cm_sidr_req_param *param); - -struct ib_cm_sidr_rep_param { - u32 qp_num; - u32 qkey; - enum ib_cm_sidr_status status; - const void *info; - u8 info_length; - const void *private_data; - u8 private_data_len; -}; - -/** - * ib_send_cm_sidr_rep - Sends a service ID resolution request to the - * remote node. - * @cm_id: Communication identifier associated with the received service ID - * resolution request. - * @param: Service ID resolution reply information. - */ -int ib_send_cm_sidr_rep(struct ib_cm_id *cm_id, - struct ib_cm_sidr_rep_param *param); - -#endif /* IB_CM_H */ diff --git a/drivers/infiniband/include/ib_fmr_pool.h b/drivers/infiniband/include/ib_fmr_pool.h deleted file mode 100644 index 6c9e24d6e144..000000000000 --- a/drivers/infiniband/include/ib_fmr_pool.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright (c) 2004 Topspin Corporation. All rights reserved. - * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * $Id: ib_fmr_pool.h 2730 2005-06-28 16:43:03Z sean.hefty $ - */ - -#if !defined(IB_FMR_POOL_H) -#define IB_FMR_POOL_H - -#include - -struct ib_fmr_pool; - -/** - * struct ib_fmr_pool_param - Parameters for creating FMR pool - * @max_pages_per_fmr:Maximum number of pages per map request. - * @access:Access flags for FMRs in pool. - * @pool_size:Number of FMRs to allocate for pool. - * @dirty_watermark:Flush is triggered when @dirty_watermark dirty - * FMRs are present. - * @flush_function:Callback called when unmapped FMRs are flushed and - * more FMRs are possibly available for mapping - * @flush_arg:Context passed to user's flush function. - * @cache:If set, FMRs may be reused after unmapping for identical map - * requests. - */ -struct ib_fmr_pool_param { - int max_pages_per_fmr; - enum ib_access_flags access; - int pool_size; - int dirty_watermark; - void (*flush_function)(struct ib_fmr_pool *pool, - void * arg); - void *flush_arg; - unsigned cache:1; -}; - -struct ib_pool_fmr { - struct ib_fmr *fmr; - struct ib_fmr_pool *pool; - struct list_head list; - struct hlist_node cache_node; - int ref_count; - int remap_count; - u64 io_virtual_address; - int page_list_len; - u64 page_list[0]; -}; - -struct ib_fmr_pool *ib_create_fmr_pool(struct ib_pd *pd, - struct ib_fmr_pool_param *params); - -void ib_destroy_fmr_pool(struct ib_fmr_pool *pool); - -int ib_flush_fmr_pool(struct ib_fmr_pool *pool); - -struct ib_pool_fmr *ib_fmr_pool_map_phys(struct ib_fmr_pool *pool_handle, - u64 *page_list, - int list_len, - u64 *io_virtual_address); - -int ib_fmr_pool_unmap(struct ib_pool_fmr *fmr); - -#endif /* IB_FMR_POOL_H */ diff --git a/drivers/infiniband/include/ib_mad.h b/drivers/infiniband/include/ib_mad.h deleted file mode 100644 index 9fcf6fc09035..000000000000 --- a/drivers/infiniband/include/ib_mad.h +++ /dev/null @@ -1,579 +0,0 @@ -/* - * Copyright (c) 2004 Mellanox Technologies Ltd. All rights reserved. - * Copyright (c) 2004 Infinicon Corporation. All rights reserved. - * Copyright (c) 2004 Intel Corporation. All rights reserved. - * Copyright (c) 2004 Topspin Corporation. All rights reserved. - * Copyright (c) 2004 Voltaire Corporation. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * $Id: ib_mad.h 2775 2005-07-02 13:42:12Z halr $ - */ - -#if !defined( IB_MAD_H ) -#define IB_MAD_H - -#include - -#include - -/* Management base version */ -#define IB_MGMT_BASE_VERSION 1 - -/* Management classes */ -#define IB_MGMT_CLASS_SUBN_LID_ROUTED 0x01 -#define IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE 0x81 -#define IB_MGMT_CLASS_SUBN_ADM 0x03 -#define IB_MGMT_CLASS_PERF_MGMT 0x04 -#define IB_MGMT_CLASS_BM 0x05 -#define IB_MGMT_CLASS_DEVICE_MGMT 0x06 -#define IB_MGMT_CLASS_CM 0x07 -#define IB_MGMT_CLASS_SNMP 0x08 -#define IB_MGMT_CLASS_VENDOR_RANGE2_START 0x30 -#define IB_MGMT_CLASS_VENDOR_RANGE2_END 0x4F - -#define IB_OPENIB_OUI (0x001405) - -/* Management methods */ -#define IB_MGMT_METHOD_GET 0x01 -#define IB_MGMT_METHOD_SET 0x02 -#define IB_MGMT_METHOD_GET_RESP 0x81 -#define IB_MGMT_METHOD_SEND 0x03 -#define IB_MGMT_METHOD_TRAP 0x05 -#define IB_MGMT_METHOD_REPORT 0x06 -#define IB_MGMT_METHOD_REPORT_RESP 0x86 -#define IB_MGMT_METHOD_TRAP_REPRESS 0x07 - -#define IB_MGMT_METHOD_RESP 0x80 - -#define IB_MGMT_MAX_METHODS 128 - -/* RMPP information */ -#define IB_MGMT_RMPP_VERSION 1 - -#define IB_MGMT_RMPP_TYPE_DATA 1 -#define IB_MGMT_RMPP_TYPE_ACK 2 -#define IB_MGMT_RMPP_TYPE_STOP 3 -#define IB_MGMT_RMPP_TYPE_ABORT 4 - -#define IB_MGMT_RMPP_FLAG_ACTIVE 1 -#define IB_MGMT_RMPP_FLAG_FIRST (1<<1) -#define IB_MGMT_RMPP_FLAG_LAST (1<<2) - -#define IB_MGMT_RMPP_NO_RESPTIME 0x1F - -#define IB_MGMT_RMPP_STATUS_SUCCESS 0 -#define IB_MGMT_RMPP_STATUS_RESX 1 -#define IB_MGMT_RMPP_STATUS_ABORT_MIN 118 -#define IB_MGMT_RMPP_STATUS_T2L 118 -#define IB_MGMT_RMPP_STATUS_BAD_LEN 119 -#define IB_MGMT_RMPP_STATUS_BAD_SEG 120 -#define IB_MGMT_RMPP_STATUS_BADT 121 -#define IB_MGMT_RMPP_STATUS_W2S 122 -#define IB_MGMT_RMPP_STATUS_S2B 123 -#define IB_MGMT_RMPP_STATUS_BAD_STATUS 124 -#define IB_MGMT_RMPP_STATUS_UNV 125 -#define IB_MGMT_RMPP_STATUS_TMR 126 -#define IB_MGMT_RMPP_STATUS_UNSPEC 127 -#define IB_MGMT_RMPP_STATUS_ABORT_MAX 127 - -#define IB_QP0 0 -#define IB_QP1 __constant_htonl(1) -#define IB_QP1_QKEY 0x80010000 -#define IB_QP_SET_QKEY 0x80000000 - -struct ib_mad_hdr { - u8 base_version; - u8 mgmt_class; - u8 class_version; - u8 method; - __be16 status; - __be16 class_specific; - __be64 tid; - __be16 attr_id; - __be16 resv; - __be32 attr_mod; -}; - -struct ib_rmpp_hdr { - u8 rmpp_version; - u8 rmpp_type; - u8 rmpp_rtime_flags; - u8 rmpp_status; - __be32 seg_num; - __be32 paylen_newwin; -}; - -typedef u64 __bitwise ib_sa_comp_mask; - -#define IB_SA_COMP_MASK(n) ((__force ib_sa_comp_mask) cpu_to_be64(1ull << n)) - -/* - * ib_sa_hdr and ib_sa_mad structures must be packed because they have - * 64-bit fields that are only 32-bit aligned. 64-bit architectures will - * lay them out wrong otherwise. (And unfortunately they are sent on - * the wire so we can't change the layout) - */ -struct ib_sa_hdr { - __be64 sm_key; - __be16 attr_offset; - __be16 reserved; - ib_sa_comp_mask comp_mask; -} __attribute__ ((packed)); - -struct ib_mad { - struct ib_mad_hdr mad_hdr; - u8 data[232]; -}; - -struct ib_rmpp_mad { - struct ib_mad_hdr mad_hdr; - struct ib_rmpp_hdr rmpp_hdr; - u8 data[220]; -}; - -struct ib_sa_mad { - struct ib_mad_hdr mad_hdr; - struct ib_rmpp_hdr rmpp_hdr; - struct ib_sa_hdr sa_hdr; - u8 data[200]; -} __attribute__ ((packed)); - -struct ib_vendor_mad { - struct ib_mad_hdr mad_hdr; - struct ib_rmpp_hdr rmpp_hdr; - u8 reserved; - u8 oui[3]; - u8 data[216]; -}; - -/** - * ib_mad_send_buf - MAD data buffer and work request for sends. - * @mad: References an allocated MAD data buffer. The size of the data - * buffer is specified in the @send_wr.length field. - * @mapping: DMA mapping information. - * @mad_agent: MAD agent that allocated the buffer. - * @context: User-controlled context fields. - * @send_wr: An initialized work request structure used when sending the MAD. - * The wr_id field of the work request is initialized to reference this - * data structure. - * @sge: A scatter-gather list referenced by the work request. - * - * Users are responsible for initializing the MAD buffer itself, with the - * exception of specifying the payload length field in any RMPP MAD. - */ -struct ib_mad_send_buf { - struct ib_mad *mad; - DECLARE_PCI_UNMAP_ADDR(mapping) - struct ib_mad_agent *mad_agent; - void *context[2]; - struct ib_send_wr send_wr; - struct ib_sge sge; -}; - -/** - * ib_get_rmpp_resptime - Returns the RMPP response time. - * @rmpp_hdr: An RMPP header. - */ -static inline u8 ib_get_rmpp_resptime(struct ib_rmpp_hdr *rmpp_hdr) -{ - return rmpp_hdr->rmpp_rtime_flags >> 3; -} - -/** - * ib_get_rmpp_flags - Returns the RMPP flags. - * @rmpp_hdr: An RMPP header. - */ -static inline u8 ib_get_rmpp_flags(struct ib_rmpp_hdr *rmpp_hdr) -{ - return rmpp_hdr->rmpp_rtime_flags & 0x7; -} - -/** - * ib_set_rmpp_resptime - Sets the response time in an RMPP header. - * @rmpp_hdr: An RMPP header. - * @rtime: The response time to set. - */ -static inline void ib_set_rmpp_resptime(struct ib_rmpp_hdr *rmpp_hdr, u8 rtime) -{ - rmpp_hdr->rmpp_rtime_flags = ib_get_rmpp_flags(rmpp_hdr) | (rtime << 3); -} - -/** - * ib_set_rmpp_flags - Sets the flags in an RMPP header. - * @rmpp_hdr: An RMPP header. - * @flags: The flags to set. - */ -static inline void ib_set_rmpp_flags(struct ib_rmpp_hdr *rmpp_hdr, u8 flags) -{ - rmpp_hdr->rmpp_rtime_flags = (rmpp_hdr->rmpp_rtime_flags & 0xF1) | - (flags & 0x7); -} - -struct ib_mad_agent; -struct ib_mad_send_wc; -struct ib_mad_recv_wc; - -/** - * ib_mad_send_handler - callback handler for a sent MAD. - * @mad_agent: MAD agent that sent the MAD. - * @mad_send_wc: Send work completion information on the sent MAD. - */ -typedef void (*ib_mad_send_handler)(struct ib_mad_agent *mad_agent, - struct ib_mad_send_wc *mad_send_wc); - -/** - * ib_mad_snoop_handler - Callback handler for snooping sent MADs. - * @mad_agent: MAD agent that snooped the MAD. - * @send_wr: Work request information on the sent MAD. - * @mad_send_wc: Work completion information on the sent MAD. Valid - * only for snooping that occurs on a send completion. - * - * Clients snooping MADs should not modify data referenced by the @send_wr - * or @mad_send_wc. - */ -typedef void (*ib_mad_snoop_handler)(struct ib_mad_agent *mad_agent, - struct ib_send_wr *send_wr, - struct ib_mad_send_wc *mad_send_wc); - -/** - * ib_mad_recv_handler - callback handler for a received MAD. - * @mad_agent: MAD agent requesting the received MAD. - * @mad_recv_wc: Received work completion information on the received MAD. - * - * MADs received in response to a send request operation will be handed to - * the user after the send operation completes. All data buffers given - * to registered agents through this routine are owned by the receiving - * client, except for snooping agents. Clients snooping MADs should not - * modify the data referenced by @mad_recv_wc. - */ -typedef void (*ib_mad_recv_handler)(struct ib_mad_agent *mad_agent, - struct ib_mad_recv_wc *mad_recv_wc); - -/** - * ib_mad_agent - Used to track MAD registration with the access layer. - * @device: Reference to device registration is on. - * @qp: Reference to QP used for sending and receiving MADs. - * @mr: Memory region for system memory usable for DMA. - * @recv_handler: Callback handler for a received MAD. - * @send_handler: Callback handler for a sent MAD. - * @snoop_handler: Callback handler for snooped sent MADs. - * @context: User-specified context associated with this registration. - * @hi_tid: Access layer assigned transaction ID for this client. - * Unsolicited MADs sent by this client will have the upper 32-bits - * of their TID set to this value. - * @port_num: Port number on which QP is registered - * @rmpp_version: If set, indicates the RMPP version used by this agent. - */ -struct ib_mad_agent { - struct ib_device *device; - struct ib_qp *qp; - struct ib_mr *mr; - ib_mad_recv_handler recv_handler; - ib_mad_send_handler send_handler; - ib_mad_snoop_handler snoop_handler; - void *context; - u32 hi_tid; - u8 port_num; - u8 rmpp_version; -}; - -/** - * ib_mad_send_wc - MAD send completion information. - * @wr_id: Work request identifier associated with the send MAD request. - * @status: Completion status. - * @vendor_err: Optional vendor error information returned with a failed - * request. - */ -struct ib_mad_send_wc { - u64 wr_id; - enum ib_wc_status status; - u32 vendor_err; -}; - -/** - * ib_mad_recv_buf - received MAD buffer information. - * @list: Reference to next data buffer for a received RMPP MAD. - * @grh: References a data buffer containing the global route header. - * The data refereced by this buffer is only valid if the GRH is - * valid. - * @mad: References the start of the received MAD. - */ -struct ib_mad_recv_buf { - struct list_head list; - struct ib_grh *grh; - struct ib_mad *mad; -}; - -/** - * ib_mad_recv_wc - received MAD information. - * @wc: Completion information for the received data. - * @recv_buf: Specifies the location of the received data buffer(s). - * @rmpp_list: Specifies a list of RMPP reassembled received MAD buffers. - * @mad_len: The length of the received MAD, without duplicated headers. - * - * For received response, the wr_id field of the wc is set to the wr_id - * for the corresponding send request. - */ -struct ib_mad_recv_wc { - struct ib_wc *wc; - struct ib_mad_recv_buf recv_buf; - struct list_head rmpp_list; - int mad_len; -}; - -/** - * ib_mad_reg_req - MAD registration request - * @mgmt_class: Indicates which management class of MADs should be receive - * by the caller. This field is only required if the user wishes to - * receive unsolicited MADs, otherwise it should be 0. - * @mgmt_class_version: Indicates which version of MADs for the given - * management class to receive. - * @oui: Indicates IEEE OUI when mgmt_class is a vendor class - * in the range from 0x30 to 0x4f. Otherwise not used. - * @method_mask: The caller will receive unsolicited MADs for any method - * where @method_mask = 1. - */ -struct ib_mad_reg_req { - u8 mgmt_class; - u8 mgmt_class_version; - u8 oui[3]; - DECLARE_BITMAP(method_mask, IB_MGMT_MAX_METHODS); -}; - -/** - * ib_register_mad_agent - Register to send/receive MADs. - * @device: The device to register with. - * @port_num: The port on the specified device to use. - * @qp_type: Specifies which QP to access. Must be either - * IB_QPT_SMI or IB_QPT_GSI. - * @mad_reg_req: Specifies which unsolicited MADs should be received - * by the caller. This parameter may be NULL if the caller only - * wishes to receive solicited responses. - * @rmpp_version: If set, indicates that the client will send - * and receive MADs that contain the RMPP header for the given version. - * If set to 0, indicates that RMPP is not used by this client. - * @send_handler: The completion callback routine invoked after a send - * request has completed. - * @recv_handler: The completion callback routine invoked for a received - * MAD. - * @context: User specified context associated with the registration. - */ -struct ib_mad_agent *ib_register_mad_agent(struct ib_device *device, - u8 port_num, - enum ib_qp_type qp_type, - struct ib_mad_reg_req *mad_reg_req, - u8 rmpp_version, - ib_mad_send_handler send_handler, - ib_mad_recv_handler recv_handler, - void *context); - -enum ib_mad_snoop_flags { - /*IB_MAD_SNOOP_POSTED_SENDS = 1,*/ - /*IB_MAD_SNOOP_RMPP_SENDS = (1<<1),*/ - IB_MAD_SNOOP_SEND_COMPLETIONS = (1<<2), - /*IB_MAD_SNOOP_RMPP_SEND_COMPLETIONS = (1<<3),*/ - IB_MAD_SNOOP_RECVS = (1<<4) - /*IB_MAD_SNOOP_RMPP_RECVS = (1<<5),*/ - /*IB_MAD_SNOOP_REDIRECTED_QPS = (1<<6)*/ -}; - -/** - * ib_register_mad_snoop - Register to snoop sent and received MADs. - * @device: The device to register with. - * @port_num: The port on the specified device to use. - * @qp_type: Specifies which QP traffic to snoop. Must be either - * IB_QPT_SMI or IB_QPT_GSI. - * @mad_snoop_flags: Specifies information where snooping occurs. - * @send_handler: The callback routine invoked for a snooped send. - * @recv_handler: The callback routine invoked for a snooped receive. - * @context: User specified context associated with the registration. - */ -struct ib_mad_agent *ib_register_mad_snoop(struct ib_device *device, - u8 port_num, - enum ib_qp_type qp_type, - int mad_snoop_flags, - ib_mad_snoop_handler snoop_handler, - ib_mad_recv_handler recv_handler, - void *context); - -/** - * ib_unregister_mad_agent - Unregisters a client from using MAD services. - * @mad_agent: Corresponding MAD registration request to deregister. - * - * After invoking this routine, MAD services are no longer usable by the - * client on the associated QP. - */ -int ib_unregister_mad_agent(struct ib_mad_agent *mad_agent); - -/** - * ib_post_send_mad - Posts MAD(s) to the send queue of the QP associated - * with the registered client. - * @mad_agent: Specifies the associated registration to post the send to. - * @send_wr: Specifies the information needed to send the MAD(s). - * @bad_send_wr: Specifies the MAD on which an error was encountered. - * - * Sent MADs are not guaranteed to complete in the order that they were posted. - * - * If the MAD requires RMPP, the data buffer should contain a single copy - * of the common MAD, RMPP, and class specific headers, followed by the class - * defined data. If the class defined data would not divide evenly into - * RMPP segments, then space must be allocated at the end of the referenced - * buffer for any required padding. To indicate the amount of class defined - * data being transferred, the paylen_newwin field in the RMPP header should - * be set to the size of the class specific header plus the amount of class - * defined data being transferred. The paylen_newwin field should be - * specified in network-byte order. - */ -int ib_post_send_mad(struct ib_mad_agent *mad_agent, - struct ib_send_wr *send_wr, - struct ib_send_wr **bad_send_wr); - -/** - * ib_coalesce_recv_mad - Coalesces received MAD data into a single buffer. - * @mad_recv_wc: Work completion information for a received MAD. - * @buf: User-provided data buffer to receive the coalesced buffers. The - * referenced buffer should be at least the size of the mad_len specified - * by @mad_recv_wc. - * - * This call copies a chain of received MAD segments into a single data buffer, - * removing duplicated headers. - */ -void ib_coalesce_recv_mad(struct ib_mad_recv_wc *mad_recv_wc, void *buf); - -/** - * ib_free_recv_mad - Returns data buffers used to receive a MAD. - * @mad_recv_wc: Work completion information for a received MAD. - * - * Clients receiving MADs through their ib_mad_recv_handler must call this - * routine to return the work completion buffers to the access layer. - */ -void ib_free_recv_mad(struct ib_mad_recv_wc *mad_recv_wc); - -/** - * ib_cancel_mad - Cancels an outstanding send MAD operation. - * @mad_agent: Specifies the registration associated with sent MAD. - * @wr_id: Indicates the work request identifier of the MAD to cancel. - * - * MADs will be returned to the user through the corresponding - * ib_mad_send_handler. - */ -void ib_cancel_mad(struct ib_mad_agent *mad_agent, u64 wr_id); - -/** - * ib_modify_mad - Modifies an outstanding send MAD operation. - * @mad_agent: Specifies the registration associated with sent MAD. - * @wr_id: Indicates the work request identifier of the MAD to modify. - * @timeout_ms: New timeout value for sent MAD. - * - * This call will reset the timeout value for a sent MAD to the specified - * value. - */ -int ib_modify_mad(struct ib_mad_agent *mad_agent, u64 wr_id, u32 timeout_ms); - -/** - * ib_redirect_mad_qp - Registers a QP for MAD services. - * @qp: Reference to a QP that requires MAD services. - * @rmpp_version: If set, indicates that the client will send - * and receive MADs that contain the RMPP header for the given version. - * If set to 0, indicates that RMPP is not used by this client. - * @send_handler: The completion callback routine invoked after a send - * request has completed. - * @recv_handler: The completion callback routine invoked for a received - * MAD. - * @context: User specified context associated with the registration. - * - * Use of this call allows clients to use MAD services, such as RMPP, - * on user-owned QPs. After calling this routine, users may send - * MADs on the specified QP by calling ib_mad_post_send. - */ -struct ib_mad_agent *ib_redirect_mad_qp(struct ib_qp *qp, - u8 rmpp_version, - ib_mad_send_handler send_handler, - ib_mad_recv_handler recv_handler, - void *context); - -/** - * ib_process_mad_wc - Processes a work completion associated with a - * MAD sent or received on a redirected QP. - * @mad_agent: Specifies the registered MAD service using the redirected QP. - * @wc: References a work completion associated with a sent or received - * MAD segment. - * - * This routine is used to complete or continue processing on a MAD request. - * If the work completion is associated with a send operation, calling - * this routine is required to continue an RMPP transfer or to wait for a - * corresponding response, if it is a request. If the work completion is - * associated with a receive operation, calling this routine is required to - * process an inbound or outbound RMPP transfer, or to match a response MAD - * with its corresponding request. - */ -int ib_process_mad_wc(struct ib_mad_agent *mad_agent, - struct ib_wc *wc); - -/** - * ib_create_send_mad - Allocate and initialize a data buffer and work request - * for sending a MAD. - * @mad_agent: Specifies the registered MAD service to associate with the MAD. - * @remote_qpn: Specifies the QPN of the receiving node. - * @pkey_index: Specifies which PKey the MAD will be sent using. This field - * is valid only if the remote_qpn is QP 1. - * @ah: References the address handle used to transfer to the remote node. - * @rmpp_active: Indicates if the send will enable RMPP. - * @hdr_len: Indicates the size of the data header of the MAD. This length - * should include the common MAD header, RMPP header, plus any class - * specific header. - * @data_len: Indicates the size of any user-transferred data. The call will - * automatically adjust the allocated buffer size to account for any - * additional padding that may be necessary. - * @gfp_mask: GFP mask used for the memory allocation. - * - * This is a helper routine that may be used to allocate a MAD. Users are - * not required to allocate outbound MADs using this call. The returned - * MAD send buffer will reference a data buffer usable for sending a MAD, along - * with an initialized work request structure. Users may modify the returned - * MAD data buffer or work request before posting the send. - * - * The returned data buffer will be cleared. Users are responsible for - * initializing the common MAD and any class specific headers. If @rmpp_active - * is set, the RMPP header will be initialized for sending. - */ -struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent, - u32 remote_qpn, u16 pkey_index, - struct ib_ah *ah, int rmpp_active, - int hdr_len, int data_len, - unsigned int __nocast gfp_mask); - -/** - * ib_free_send_mad - Returns data buffers used to send a MAD. - * @send_buf: Previously allocated send data buffer. - */ -void ib_free_send_mad(struct ib_mad_send_buf *send_buf); - -#endif /* IB_MAD_H */ diff --git a/drivers/infiniband/include/ib_pack.h b/drivers/infiniband/include/ib_pack.h deleted file mode 100644 index fe480f3e8654..000000000000 --- a/drivers/infiniband/include/ib_pack.h +++ /dev/null @@ -1,245 +0,0 @@ -/* - * Copyright (c) 2004 Topspin Corporation. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * $Id: ib_pack.h 1349 2004-12-16 21:09:43Z roland $ - */ - -#ifndef IB_PACK_H -#define IB_PACK_H - -#include - -enum { - IB_LRH_BYTES = 8, - IB_GRH_BYTES = 40, - IB_BTH_BYTES = 12, - IB_DETH_BYTES = 8 -}; - -struct ib_field { - size_t struct_offset_bytes; - size_t struct_size_bytes; - int offset_words; - int offset_bits; - int size_bits; - char *field_name; -}; - -#define RESERVED \ - .field_name = "reserved" - -/* - * This macro cleans up the definitions of constants for BTH opcodes. - * It is used to define constants such as IB_OPCODE_UD_SEND_ONLY, - * which becomes IB_OPCODE_UD + IB_OPCODE_SEND_ONLY, and this gives - * the correct value. - * - * In short, user code should use the constants defined using the - * macro rather than worrying about adding together other constants. -*/ -#define IB_OPCODE(transport, op) \ - IB_OPCODE_ ## transport ## _ ## op = \ - IB_OPCODE_ ## transport + IB_OPCODE_ ## op - -enum { - /* transport types -- just used to define real constants */ - IB_OPCODE_RC = 0x00, - IB_OPCODE_UC = 0x20, - IB_OPCODE_RD = 0x40, - IB_OPCODE_UD = 0x60, - - /* operations -- just used to define real constants */ - IB_OPCODE_SEND_FIRST = 0x00, - IB_OPCODE_SEND_MIDDLE = 0x01, - IB_OPCODE_SEND_LAST = 0x02, - IB_OPCODE_SEND_LAST_WITH_IMMEDIATE = 0x03, - IB_OPCODE_SEND_ONLY = 0x04, - IB_OPCODE_SEND_ONLY_WITH_IMMEDIATE = 0x05, - IB_OPCODE_RDMA_WRITE_FIRST = 0x06, - IB_OPCODE_RDMA_WRITE_MIDDLE = 0x07, - IB_OPCODE_RDMA_WRITE_LAST = 0x08, - IB_OPCODE_RDMA_WRITE_LAST_WITH_IMMEDIATE = 0x09, - IB_OPCODE_RDMA_WRITE_ONLY = 0x0a, - IB_OPCODE_RDMA_WRITE_ONLY_WITH_IMMEDIATE = 0x0b, - IB_OPCODE_RDMA_READ_REQUEST = 0x0c, - IB_OPCODE_RDMA_READ_RESPONSE_FIRST = 0x0d, - IB_OPCODE_RDMA_READ_RESPONSE_MIDDLE = 0x0e, - IB_OPCODE_RDMA_READ_RESPONSE_LAST = 0x0f, - IB_OPCODE_RDMA_READ_RESPONSE_ONLY = 0x10, - IB_OPCODE_ACKNOWLEDGE = 0x11, - IB_OPCODE_ATOMIC_ACKNOWLEDGE = 0x12, - IB_OPCODE_COMPARE_SWAP = 0x13, - IB_OPCODE_FETCH_ADD = 0x14, - - /* real constants follow -- see comment about above IB_OPCODE() - macro for more details */ - - /* RC */ - IB_OPCODE(RC, SEND_FIRST), - IB_OPCODE(RC, SEND_MIDDLE), - IB_OPCODE(RC, SEND_LAST), - IB_OPCODE(RC, SEND_LAST_WITH_IMMEDIATE), - IB_OPCODE(RC, SEND_ONLY), - IB_OPCODE(RC, SEND_ONLY_WITH_IMMEDIATE), - IB_OPCODE(RC, RDMA_WRITE_FIRST), - IB_OPCODE(RC, RDMA_WRITE_MIDDLE), - IB_OPCODE(RC, RDMA_WRITE_LAST), - IB_OPCODE(RC, RDMA_WRITE_LAST_WITH_IMMEDIATE), - IB_OPCODE(RC, RDMA_WRITE_ONLY), - IB_OPCODE(RC, RDMA_WRITE_ONLY_WITH_IMMEDIATE), - IB_OPCODE(RC, RDMA_READ_REQUEST), - IB_OPCODE(RC, RDMA_READ_RESPONSE_FIRST), - IB_OPCODE(RC, RDMA_READ_RESPONSE_MIDDLE), - IB_OPCODE(RC, RDMA_READ_RESPONSE_LAST), - IB_OPCODE(RC, RDMA_READ_RESPONSE_ONLY), - IB_OPCODE(RC, ACKNOWLEDGE), - IB_OPCODE(RC, ATOMIC_ACKNOWLEDGE), - IB_OPCODE(RC, COMPARE_SWAP), - IB_OPCODE(RC, FETCH_ADD), - - /* UC */ - IB_OPCODE(UC, SEND_FIRST), - IB_OPCODE(UC, SEND_MIDDLE), - IB_OPCODE(UC, SEND_LAST), - IB_OPCODE(UC, SEND_LAST_WITH_IMMEDIATE), - IB_OPCODE(UC, SEND_ONLY), - IB_OPCODE(UC, SEND_ONLY_WITH_IMMEDIATE), - IB_OPCODE(UC, RDMA_WRITE_FIRST), - IB_OPCODE(UC, RDMA_WRITE_MIDDLE), - IB_OPCODE(UC, RDMA_WRITE_LAST), - IB_OPCODE(UC, RDMA_WRITE_LAST_WITH_IMMEDIATE), - IB_OPCODE(UC, RDMA_WRITE_ONLY), - IB_OPCODE(UC, RDMA_WRITE_ONLY_WITH_IMMEDIATE), - - /* RD */ - IB_OPCODE(RD, SEND_FIRST), - IB_OPCODE(RD, SEND_MIDDLE), - IB_OPCODE(RD, SEND_LAST), - IB_OPCODE(RD, SEND_LAST_WITH_IMMEDIATE), - IB_OPCODE(RD, SEND_ONLY), - IB_OPCODE(RD, SEND_ONLY_WITH_IMMEDIATE), - IB_OPCODE(RD, RDMA_WRITE_FIRST), - IB_OPCODE(RD, RDMA_WRITE_MIDDLE), - IB_OPCODE(RD, RDMA_WRITE_LAST), - IB_OPCODE(RD, RDMA_WRITE_LAST_WITH_IMMEDIATE), - IB_OPCODE(RD, RDMA_WRITE_ONLY), - IB_OPCODE(RD, RDMA_WRITE_ONLY_WITH_IMMEDIATE), - IB_OPCODE(RD, RDMA_READ_REQUEST), - IB_OPCODE(RD, RDMA_READ_RESPONSE_FIRST), - IB_OPCODE(RD, RDMA_READ_RESPONSE_MIDDLE), - IB_OPCODE(RD, RDMA_READ_RESPONSE_LAST), - IB_OPCODE(RD, RDMA_READ_RESPONSE_ONLY), - IB_OPCODE(RD, ACKNOWLEDGE), - IB_OPCODE(RD, ATOMIC_ACKNOWLEDGE), - IB_OPCODE(RD, COMPARE_SWAP), - IB_OPCODE(RD, FETCH_ADD), - - /* UD */ - IB_OPCODE(UD, SEND_ONLY), - IB_OPCODE(UD, SEND_ONLY_WITH_IMMEDIATE) -}; - -enum { - IB_LNH_RAW = 0, - IB_LNH_IP = 1, - IB_LNH_IBA_LOCAL = 2, - IB_LNH_IBA_GLOBAL = 3 -}; - -struct ib_unpacked_lrh { - u8 virtual_lane; - u8 link_version; - u8 service_level; - u8 link_next_header; - __be16 destination_lid; - __be16 packet_length; - __be16 source_lid; -}; - -struct ib_unpacked_grh { - u8 ip_version; - u8 traffic_class; - __be32 flow_label; - __be16 payload_length; - u8 next_header; - u8 hop_limit; - union ib_gid source_gid; - union ib_gid destination_gid; -}; - -struct ib_unpacked_bth { - u8 opcode; - u8 solicited_event; - u8 mig_req; - u8 pad_count; - u8 transport_header_version; - __be16 pkey; - __be32 destination_qpn; - u8 ack_req; - __be32 psn; -}; - -struct ib_unpacked_deth { - __be32 qkey; - __be32 source_qpn; -}; - -struct ib_ud_header { - struct ib_unpacked_lrh lrh; - int grh_present; - struct ib_unpacked_grh grh; - struct ib_unpacked_bth bth; - struct ib_unpacked_deth deth; - int immediate_present; - __be32 immediate_data; -}; - -void ib_pack(const struct ib_field *desc, - int desc_len, - void *structure, - void *buf); - -void ib_unpack(const struct ib_field *desc, - int desc_len, - void *buf, - void *structure); - -void ib_ud_header_init(int payload_bytes, - int grh_present, - struct ib_ud_header *header); - -int ib_ud_header_pack(struct ib_ud_header *header, - void *buf); - -int ib_ud_header_unpack(void *buf, - struct ib_ud_header *header); - -#endif /* IB_PACK_H */ diff --git a/drivers/infiniband/include/ib_sa.h b/drivers/infiniband/include/ib_sa.h deleted file mode 100644 index 326159c04aca..000000000000 --- a/drivers/infiniband/include/ib_sa.h +++ /dev/null @@ -1,373 +0,0 @@ -/* - * Copyright (c) 2004 Topspin Communications. All rights reserved. - * Copyright (c) 2005 Voltaire, Inc. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * $Id: ib_sa.h 2811 2005-07-06 18:11:43Z halr $ - */ - -#ifndef IB_SA_H -#define IB_SA_H - -#include - -#include -#include - -enum { - IB_SA_CLASS_VERSION = 2, /* IB spec version 1.1/1.2 */ - - IB_SA_METHOD_GET_TABLE = 0x12, - IB_SA_METHOD_GET_TABLE_RESP = 0x92, - IB_SA_METHOD_DELETE = 0x15 -}; - -enum ib_sa_selector { - IB_SA_GTE = 0, - IB_SA_LTE = 1, - IB_SA_EQ = 2, - /* - * The meaning of "best" depends on the attribute: for - * example, for MTU best will return the largest available - * MTU, while for packet life time, best will return the - * smallest available life time. - */ - IB_SA_BEST = 3 -}; - -enum ib_sa_rate { - IB_SA_RATE_2_5_GBPS = 2, - IB_SA_RATE_5_GBPS = 5, - IB_SA_RATE_10_GBPS = 3, - IB_SA_RATE_20_GBPS = 6, - IB_SA_RATE_30_GBPS = 4, - IB_SA_RATE_40_GBPS = 7, - IB_SA_RATE_60_GBPS = 8, - IB_SA_RATE_80_GBPS = 9, - IB_SA_RATE_120_GBPS = 10 -}; - -static inline int ib_sa_rate_enum_to_int(enum ib_sa_rate rate) -{ - switch (rate) { - case IB_SA_RATE_2_5_GBPS: return 1; - case IB_SA_RATE_5_GBPS: return 2; - case IB_SA_RATE_10_GBPS: return 4; - case IB_SA_RATE_20_GBPS: return 8; - case IB_SA_RATE_30_GBPS: return 12; - case IB_SA_RATE_40_GBPS: return 16; - case IB_SA_RATE_60_GBPS: return 24; - case IB_SA_RATE_80_GBPS: return 32; - case IB_SA_RATE_120_GBPS: return 48; - default: return -1; - } -} - -/* - * Structures for SA records are named "struct ib_sa_xxx_rec." No - * attempt is made to pack structures to match the physical layout of - * SA records in SA MADs; all packing and unpacking is handled by the - * SA query code. - * - * For a record with structure ib_sa_xxx_rec, the naming convention - * for the component mask value for field yyy is IB_SA_XXX_REC_YYY (we - * never use different abbreviations or otherwise change the spelling - * of xxx/yyy between ib_sa_xxx_rec.yyy and IB_SA_XXX_REC_YYY). - * - * Reserved rows are indicated with comments to help maintainability. - */ - -/* reserved: 0 */ -/* reserved: 1 */ -#define IB_SA_PATH_REC_DGID IB_SA_COMP_MASK( 2) -#define IB_SA_PATH_REC_SGID IB_SA_COMP_MASK( 3) -#define IB_SA_PATH_REC_DLID IB_SA_COMP_MASK( 4) -#define IB_SA_PATH_REC_SLID IB_SA_COMP_MASK( 5) -#define IB_SA_PATH_REC_RAW_TRAFFIC IB_SA_COMP_MASK( 6) -/* reserved: 7 */ -#define IB_SA_PATH_REC_FLOW_LABEL IB_SA_COMP_MASK( 8) -#define IB_SA_PATH_REC_HOP_LIMIT IB_SA_COMP_MASK( 9) -#define IB_SA_PATH_REC_TRAFFIC_CLASS IB_SA_COMP_MASK(10) -#define IB_SA_PATH_REC_REVERSIBLE IB_SA_COMP_MASK(11) -#define IB_SA_PATH_REC_NUMB_PATH IB_SA_COMP_MASK(12) -#define IB_SA_PATH_REC_PKEY IB_SA_COMP_MASK(13) -/* reserved: 14 */ -#define IB_SA_PATH_REC_SL IB_SA_COMP_MASK(15) -#define IB_SA_PATH_REC_MTU_SELECTOR IB_SA_COMP_MASK(16) -#define IB_SA_PATH_REC_MTU IB_SA_COMP_MASK(17) -#define IB_SA_PATH_REC_RATE_SELECTOR IB_SA_COMP_MASK(18) -#define IB_SA_PATH_REC_RATE IB_SA_COMP_MASK(19) -#define IB_SA_PATH_REC_PACKET_LIFE_TIME_SELECTOR IB_SA_COMP_MASK(20) -#define IB_SA_PATH_REC_PACKET_LIFE_TIME IB_SA_COMP_MASK(21) -#define IB_SA_PATH_REC_PREFERENCE IB_SA_COMP_MASK(22) - -struct ib_sa_path_rec { - /* reserved */ - /* reserved */ - union ib_gid dgid; - union ib_gid sgid; - __be16 dlid; - __be16 slid; - int raw_traffic; - /* reserved */ - __be32 flow_label; - u8 hop_limit; - u8 traffic_class; - int reversible; - u8 numb_path; - __be16 pkey; - /* reserved */ - u8 sl; - u8 mtu_selector; - u8 mtu; - u8 rate_selector; - u8 rate; - u8 packet_life_time_selector; - u8 packet_life_time; - u8 preference; -}; - -#define IB_SA_MCMEMBER_REC_MGID IB_SA_COMP_MASK( 0) -#define IB_SA_MCMEMBER_REC_PORT_GID IB_SA_COMP_MASK( 1) -#define IB_SA_MCMEMBER_REC_QKEY IB_SA_COMP_MASK( 2) -#define IB_SA_MCMEMBER_REC_MLID IB_SA_COMP_MASK( 3) -#define IB_SA_MCMEMBER_REC_MTU_SELECTOR IB_SA_COMP_MASK( 4) -#define IB_SA_MCMEMBER_REC_MTU IB_SA_COMP_MASK( 5) -#define IB_SA_MCMEMBER_REC_TRAFFIC_CLASS IB_SA_COMP_MASK( 6) -#define IB_SA_MCMEMBER_REC_PKEY IB_SA_COMP_MASK( 7) -#define IB_SA_MCMEMBER_REC_RATE_SELECTOR IB_SA_COMP_MASK( 8) -#define IB_SA_MCMEMBER_REC_RATE IB_SA_COMP_MASK( 9) -#define IB_SA_MCMEMBER_REC_PACKET_LIFE_TIME_SELECTOR IB_SA_COMP_MASK(10) -#define IB_SA_MCMEMBER_REC_PACKET_LIFE_TIME IB_SA_COMP_MASK(11) -#define IB_SA_MCMEMBER_REC_SL IB_SA_COMP_MASK(12) -#define IB_SA_MCMEMBER_REC_FLOW_LABEL IB_SA_COMP_MASK(13) -#define IB_SA_MCMEMBER_REC_HOP_LIMIT IB_SA_COMP_MASK(14) -#define IB_SA_MCMEMBER_REC_SCOPE IB_SA_COMP_MASK(15) -#define IB_SA_MCMEMBER_REC_JOIN_STATE IB_SA_COMP_MASK(16) -#define IB_SA_MCMEMBER_REC_PROXY_JOIN IB_SA_COMP_MASK(17) - -struct ib_sa_mcmember_rec { - union ib_gid mgid; - union ib_gid port_gid; - __be32 qkey; - __be16 mlid; - u8 mtu_selector; - u8 mtu; - u8 traffic_class; - __be16 pkey; - u8 rate_selector; - u8 rate; - u8 packet_life_time_selector; - u8 packet_life_time; - u8 sl; - __be32 flow_label; - u8 hop_limit; - u8 scope; - u8 join_state; - int proxy_join; -}; - -/* Service Record Component Mask Sec 15.2.5.14 Ver 1.1 */ -#define IB_SA_SERVICE_REC_SERVICE_ID IB_SA_COMP_MASK( 0) -#define IB_SA_SERVICE_REC_SERVICE_GID IB_SA_COMP_MASK( 1) -#define IB_SA_SERVICE_REC_SERVICE_PKEY IB_SA_COMP_MASK( 2) -/* reserved: 3 */ -#define IB_SA_SERVICE_REC_SERVICE_LEASE IB_SA_COMP_MASK( 4) -#define IB_SA_SERVICE_REC_SERVICE_KEY IB_SA_COMP_MASK( 5) -#define IB_SA_SERVICE_REC_SERVICE_NAME IB_SA_COMP_MASK( 6) -#define IB_SA_SERVICE_REC_SERVICE_DATA8_0 IB_SA_COMP_MASK( 7) -#define IB_SA_SERVICE_REC_SERVICE_DATA8_1 IB_SA_COMP_MASK( 8) -#define IB_SA_SERVICE_REC_SERVICE_DATA8_2 IB_SA_COMP_MASK( 9) -#define IB_SA_SERVICE_REC_SERVICE_DATA8_3 IB_SA_COMP_MASK(10) -#define IB_SA_SERVICE_REC_SERVICE_DATA8_4 IB_SA_COMP_MASK(11) -#define IB_SA_SERVICE_REC_SERVICE_DATA8_5 IB_SA_COMP_MASK(12) -#define IB_SA_SERVICE_REC_SERVICE_DATA8_6 IB_SA_COMP_MASK(13) -#define IB_SA_SERVICE_REC_SERVICE_DATA8_7 IB_SA_COMP_MASK(14) -#define IB_SA_SERVICE_REC_SERVICE_DATA8_8 IB_SA_COMP_MASK(15) -#define IB_SA_SERVICE_REC_SERVICE_DATA8_9 IB_SA_COMP_MASK(16) -#define IB_SA_SERVICE_REC_SERVICE_DATA8_10 IB_SA_COMP_MASK(17) -#define IB_SA_SERVICE_REC_SERVICE_DATA8_11 IB_SA_COMP_MASK(18) -#define IB_SA_SERVICE_REC_SERVICE_DATA8_12 IB_SA_COMP_MASK(19) -#define IB_SA_SERVICE_REC_SERVICE_DATA8_13 IB_SA_COMP_MASK(20) -#define IB_SA_SERVICE_REC_SERVICE_DATA8_14 IB_SA_COMP_MASK(21) -#define IB_SA_SERVICE_REC_SERVICE_DATA8_15 IB_SA_COMP_MASK(22) -#define IB_SA_SERVICE_REC_SERVICE_DATA16_0 IB_SA_COMP_MASK(23) -#define IB_SA_SERVICE_REC_SERVICE_DATA16_1 IB_SA_COMP_MASK(24) -#define IB_SA_SERVICE_REC_SERVICE_DATA16_2 IB_SA_COMP_MASK(25) -#define IB_SA_SERVICE_REC_SERVICE_DATA16_3 IB_SA_COMP_MASK(26) -#define IB_SA_SERVICE_REC_SERVICE_DATA16_4 IB_SA_COMP_MASK(27) -#define IB_SA_SERVICE_REC_SERVICE_DATA16_5 IB_SA_COMP_MASK(28) -#define IB_SA_SERVICE_REC_SERVICE_DATA16_6 IB_SA_COMP_MASK(29) -#define IB_SA_SERVICE_REC_SERVICE_DATA16_7 IB_SA_COMP_MASK(30) -#define IB_SA_SERVICE_REC_SERVICE_DATA32_0 IB_SA_COMP_MASK(31) -#define IB_SA_SERVICE_REC_SERVICE_DATA32_1 IB_SA_COMP_MASK(32) -#define IB_SA_SERVICE_REC_SERVICE_DATA32_2 IB_SA_COMP_MASK(33) -#define IB_SA_SERVICE_REC_SERVICE_DATA32_3 IB_SA_COMP_MASK(34) -#define IB_SA_SERVICE_REC_SERVICE_DATA64_0 IB_SA_COMP_MASK(35) -#define IB_SA_SERVICE_REC_SERVICE_DATA64_1 IB_SA_COMP_MASK(36) - -#define IB_DEFAULT_SERVICE_LEASE 0xFFFFFFFF - -struct ib_sa_service_rec { - u64 id; - union ib_gid gid; - __be16 pkey; - /* reserved */ - u32 lease; - u8 key[16]; - u8 name[64]; - u8 data8[16]; - u16 data16[8]; - u32 data32[4]; - u64 data64[2]; -}; - -struct ib_sa_query; - -void ib_sa_cancel_query(int id, struct ib_sa_query *query); - -int ib_sa_path_rec_get(struct ib_device *device, u8 port_num, - struct ib_sa_path_rec *rec, - ib_sa_comp_mask comp_mask, - int timeout_ms, unsigned int __nocast gfp_mask, - void (*callback)(int status, - struct ib_sa_path_rec *resp, - void *context), - void *context, - struct ib_sa_query **query); - -int ib_sa_mcmember_rec_query(struct ib_device *device, u8 port_num, - u8 method, - struct ib_sa_mcmember_rec *rec, - ib_sa_comp_mask comp_mask, - int timeout_ms, unsigned int __nocast gfp_mask, - void (*callback)(int status, - struct ib_sa_mcmember_rec *resp, - void *context), - void *context, - struct ib_sa_query **query); - -int ib_sa_service_rec_query(struct ib_device *device, u8 port_num, - u8 method, - struct ib_sa_service_rec *rec, - ib_sa_comp_mask comp_mask, - int timeout_ms, unsigned int __nocast gfp_mask, - void (*callback)(int status, - struct ib_sa_service_rec *resp, - void *context), - void *context, - struct ib_sa_query **sa_query); - -/** - * ib_sa_mcmember_rec_set - Start an MCMember set query - * @device:device to send query on - * @port_num: port number to send query on - * @rec:MCMember Record to send in query - * @comp_mask:component mask to send in query - * @timeout_ms:time to wait for response - * @gfp_mask:GFP mask to use for internal allocations - * @callback:function called when query completes, times out or is - * canceled - * @context:opaque user context passed to callback - * @sa_query:query context, used to cancel query - * - * Send an MCMember Set query to the SA (eg to join a multicast - * group). The callback function will be called when the query - * completes (or fails); status is 0 for a successful response, -EINTR - * if the query is canceled, -ETIMEDOUT is the query timed out, or - * -EIO if an error occurred sending the query. The resp parameter of - * the callback is only valid if status is 0. - * - * If the return value of ib_sa_mcmember_rec_set() is negative, it is - * an error code. Otherwise it is a query ID that can be used to - * cancel the query. - */ -static inline int -ib_sa_mcmember_rec_set(struct ib_device *device, u8 port_num, - struct ib_sa_mcmember_rec *rec, - ib_sa_comp_mask comp_mask, - int timeout_ms, unsigned int __nocast gfp_mask, - void (*callback)(int status, - struct ib_sa_mcmember_rec *resp, - void *context), - void *context, - struct ib_sa_query **query) -{ - return ib_sa_mcmember_rec_query(device, port_num, - IB_MGMT_METHOD_SET, - rec, comp_mask, - timeout_ms, gfp_mask, callback, - context, query); -} - -/** - * ib_sa_mcmember_rec_delete - Start an MCMember delete query - * @device:device to send query on - * @port_num: port number to send query on - * @rec:MCMember Record to send in query - * @comp_mask:component mask to send in query - * @timeout_ms:time to wait for response - * @gfp_mask:GFP mask to use for internal allocations - * @callback:function called when query completes, times out or is - * canceled - * @context:opaque user context passed to callback - * @sa_query:query context, used to cancel query - * - * Send an MCMember Delete query to the SA (eg to leave a multicast - * group). The callback function will be called when the query - * completes (or fails); status is 0 for a successful response, -EINTR - * if the query is canceled, -ETIMEDOUT is the query timed out, or - * -EIO if an error occurred sending the query. The resp parameter of - * the callback is only valid if status is 0. - * - * If the return value of ib_sa_mcmember_rec_delete() is negative, it - * is an error code. Otherwise it is a query ID that can be used to - * cancel the query. - */ -static inline int -ib_sa_mcmember_rec_delete(struct ib_device *device, u8 port_num, - struct ib_sa_mcmember_rec *rec, - ib_sa_comp_mask comp_mask, - int timeout_ms, unsigned int __nocast gfp_mask, - void (*callback)(int status, - struct ib_sa_mcmember_rec *resp, - void *context), - void *context, - struct ib_sa_query **query) -{ - return ib_sa_mcmember_rec_query(device, port_num, - IB_SA_METHOD_DELETE, - rec, comp_mask, - timeout_ms, gfp_mask, callback, - context, query); -} - - -#endif /* IB_SA_H */ diff --git a/drivers/infiniband/include/ib_smi.h b/drivers/infiniband/include/ib_smi.h deleted file mode 100644 index c07b31cb9499..000000000000 --- a/drivers/infiniband/include/ib_smi.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Copyright (c) 2004 Mellanox Technologies Ltd. All rights reserved. - * Copyright (c) 2004 Infinicon Corporation. All rights reserved. - * Copyright (c) 2004 Intel Corporation. All rights reserved. - * Copyright (c) 2004 Topspin Corporation. All rights reserved. - * Copyright (c) 2004 Voltaire Corporation. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * $Id: ib_smi.h 1389 2004-12-27 22:56:47Z roland $ - */ - -#if !defined( IB_SMI_H ) -#define IB_SMI_H - -#include - -#define IB_SMP_DATA_SIZE 64 -#define IB_SMP_MAX_PATH_HOPS 64 - -struct ib_smp { - u8 base_version; - u8 mgmt_class; - u8 class_version; - u8 method; - __be16 status; - u8 hop_ptr; - u8 hop_cnt; - __be64 tid; - __be16 attr_id; - __be16 resv; - __be32 attr_mod; - __be64 mkey; - __be16 dr_slid; - __be16 dr_dlid; - u8 reserved[28]; - u8 data[IB_SMP_DATA_SIZE]; - u8 initial_path[IB_SMP_MAX_PATH_HOPS]; - u8 return_path[IB_SMP_MAX_PATH_HOPS]; -} __attribute__ ((packed)); - -#define IB_SMP_DIRECTION __constant_htons(0x8000) - -/* Subnet management attributes */ -#define IB_SMP_ATTR_NOTICE __constant_htons(0x0002) -#define IB_SMP_ATTR_NODE_DESC __constant_htons(0x0010) -#define IB_SMP_ATTR_NODE_INFO __constant_htons(0x0011) -#define IB_SMP_ATTR_SWITCH_INFO __constant_htons(0x0012) -#define IB_SMP_ATTR_GUID_INFO __constant_htons(0x0014) -#define IB_SMP_ATTR_PORT_INFO __constant_htons(0x0015) -#define IB_SMP_ATTR_PKEY_TABLE __constant_htons(0x0016) -#define IB_SMP_ATTR_SL_TO_VL_TABLE __constant_htons(0x0017) -#define IB_SMP_ATTR_VL_ARB_TABLE __constant_htons(0x0018) -#define IB_SMP_ATTR_LINEAR_FORWARD_TABLE __constant_htons(0x0019) -#define IB_SMP_ATTR_RANDOM_FORWARD_TABLE __constant_htons(0x001A) -#define IB_SMP_ATTR_MCAST_FORWARD_TABLE __constant_htons(0x001B) -#define IB_SMP_ATTR_SM_INFO __constant_htons(0x0020) -#define IB_SMP_ATTR_VENDOR_DIAG __constant_htons(0x0030) -#define IB_SMP_ATTR_LED_INFO __constant_htons(0x0031) -#define IB_SMP_ATTR_VENDOR_MASK __constant_htons(0xFF00) - -static inline u8 -ib_get_smp_direction(struct ib_smp *smp) -{ - return ((smp->status & IB_SMP_DIRECTION) == IB_SMP_DIRECTION); -} - -#endif /* IB_SMI_H */ diff --git a/drivers/infiniband/include/ib_user_cm.h b/drivers/infiniband/include/ib_user_cm.h deleted file mode 100644 index 72182d16778b..000000000000 --- a/drivers/infiniband/include/ib_user_cm.h +++ /dev/null @@ -1,328 +0,0 @@ -/* - * Copyright (c) 2005 Topspin Communications. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * $Id: ib_user_cm.h 2576 2005-06-09 17:00:30Z libor $ - */ - -#ifndef IB_USER_CM_H -#define IB_USER_CM_H - -#include - -#define IB_USER_CM_ABI_VERSION 1 - -enum { - IB_USER_CM_CMD_CREATE_ID, - IB_USER_CM_CMD_DESTROY_ID, - IB_USER_CM_CMD_ATTR_ID, - - IB_USER_CM_CMD_LISTEN, - IB_USER_CM_CMD_ESTABLISH, - - IB_USER_CM_CMD_SEND_REQ, - IB_USER_CM_CMD_SEND_REP, - IB_USER_CM_CMD_SEND_RTU, - IB_USER_CM_CMD_SEND_DREQ, - IB_USER_CM_CMD_SEND_DREP, - IB_USER_CM_CMD_SEND_REJ, - IB_USER_CM_CMD_SEND_MRA, - IB_USER_CM_CMD_SEND_LAP, - IB_USER_CM_CMD_SEND_APR, - IB_USER_CM_CMD_SEND_SIDR_REQ, - IB_USER_CM_CMD_SEND_SIDR_REP, - - IB_USER_CM_CMD_EVENT, -}; -/* - * command ABI structures. - */ -struct ib_ucm_cmd_hdr { - __u32 cmd; - __u16 in; - __u16 out; -}; - -struct ib_ucm_create_id { - __u64 response; -}; - -struct ib_ucm_create_id_resp { - __u32 id; -}; - -struct ib_ucm_destroy_id { - __u32 id; -}; - -struct ib_ucm_attr_id { - __u64 response; - __u32 id; -}; - -struct ib_ucm_attr_id_resp { - __be64 service_id; - __be64 service_mask; - __be32 local_id; - __be32 remote_id; -}; - -struct ib_ucm_listen { - __be64 service_id; - __be64 service_mask; - __u32 id; -}; - -struct ib_ucm_establish { - __u32 id; -}; - -struct ib_ucm_private_data { - __u64 data; - __u32 id; - __u8 len; - __u8 reserved[3]; -}; - -struct ib_ucm_path_rec { - __u8 dgid[16]; - __u8 sgid[16]; - __be16 dlid; - __be16 slid; - __u32 raw_traffic; - __be32 flow_label; - __u32 reversible; - __u32 mtu; - __be16 pkey; - __u8 hop_limit; - __u8 traffic_class; - __u8 numb_path; - __u8 sl; - __u8 mtu_selector; - __u8 rate_selector; - __u8 rate; - __u8 packet_life_time_selector; - __u8 packet_life_time; - __u8 preference; -}; - -struct ib_ucm_req { - __u32 id; - __u32 qpn; - __u32 qp_type; - __u32 psn; - __be64 sid; - __u64 data; - __u64 primary_path; - __u64 alternate_path; - __u8 len; - __u8 peer_to_peer; - __u8 responder_resources; - __u8 initiator_depth; - __u8 remote_cm_response_timeout; - __u8 flow_control; - __u8 local_cm_response_timeout; - __u8 retry_count; - __u8 rnr_retry_count; - __u8 max_cm_retries; - __u8 srq; - __u8 reserved[1]; -}; - -struct ib_ucm_rep { - __u64 data; - __u32 id; - __u32 qpn; - __u32 psn; - __u8 len; - __u8 responder_resources; - __u8 initiator_depth; - __u8 target_ack_delay; - __u8 failover_accepted; - __u8 flow_control; - __u8 rnr_retry_count; - __u8 srq; -}; - -struct ib_ucm_info { - __u32 id; - __u32 status; - __u64 info; - __u64 data; - __u8 info_len; - __u8 data_len; - __u8 reserved[2]; -}; - -struct ib_ucm_mra { - __u64 data; - __u32 id; - __u8 len; - __u8 timeout; - __u8 reserved[2]; -}; - -struct ib_ucm_lap { - __u64 path; - __u64 data; - __u32 id; - __u8 len; - __u8 reserved[3]; -}; - -struct ib_ucm_sidr_req { - __u32 id; - __u32 timeout; - __be64 sid; - __u64 data; - __u64 path; - __u16 pkey; - __u8 len; - __u8 max_cm_retries; -}; - -struct ib_ucm_sidr_rep { - __u32 id; - __u32 qpn; - __u32 qkey; - __u32 status; - __u64 info; - __u64 data; - __u8 info_len; - __u8 data_len; - __u8 reserved[2]; -}; -/* - * event notification ABI structures. - */ -struct ib_ucm_event_get { - __u64 response; - __u64 data; - __u64 info; - __u8 data_len; - __u8 info_len; - __u8 reserved[2]; -}; - -struct ib_ucm_req_event_resp { - __u32 listen_id; - /* device */ - /* port */ - struct ib_ucm_path_rec primary_path; - struct ib_ucm_path_rec alternate_path; - __be64 remote_ca_guid; - __u32 remote_qkey; - __u32 remote_qpn; - __u32 qp_type; - __u32 starting_psn; - __u8 responder_resources; - __u8 initiator_depth; - __u8 local_cm_response_timeout; - __u8 flow_control; - __u8 remote_cm_response_timeout; - __u8 retry_count; - __u8 rnr_retry_count; - __u8 srq; -}; - -struct ib_ucm_rep_event_resp { - __be64 remote_ca_guid; - __u32 remote_qkey; - __u32 remote_qpn; - __u32 starting_psn; - __u8 responder_resources; - __u8 initiator_depth; - __u8 target_ack_delay; - __u8 failover_accepted; - __u8 flow_control; - __u8 rnr_retry_count; - __u8 srq; - __u8 reserved[1]; -}; - -struct ib_ucm_rej_event_resp { - __u32 reason; - /* ari in ib_ucm_event_get info field. */ -}; - -struct ib_ucm_mra_event_resp { - __u8 timeout; - __u8 reserved[3]; -}; - -struct ib_ucm_lap_event_resp { - struct ib_ucm_path_rec path; -}; - -struct ib_ucm_apr_event_resp { - __u32 status; - /* apr info in ib_ucm_event_get info field. */ -}; - -struct ib_ucm_sidr_req_event_resp { - __u32 listen_id; - /* device */ - /* port */ - __u16 pkey; - __u8 reserved[2]; -}; - -struct ib_ucm_sidr_rep_event_resp { - __u32 status; - __u32 qkey; - __u32 qpn; - /* info in ib_ucm_event_get info field. */ -}; - -#define IB_UCM_PRES_DATA 0x01 -#define IB_UCM_PRES_INFO 0x02 -#define IB_UCM_PRES_PRIMARY 0x04 -#define IB_UCM_PRES_ALTERNATE 0x08 - -struct ib_ucm_event_resp { - __u32 id; - __u32 event; - __u32 present; - union { - struct ib_ucm_req_event_resp req_resp; - struct ib_ucm_rep_event_resp rep_resp; - struct ib_ucm_rej_event_resp rej_resp; - struct ib_ucm_mra_event_resp mra_resp; - struct ib_ucm_lap_event_resp lap_resp; - struct ib_ucm_apr_event_resp apr_resp; - - struct ib_ucm_sidr_req_event_resp sidr_req_resp; - struct ib_ucm_sidr_rep_event_resp sidr_rep_resp; - - __u32 send_status; - } u; -}; - -#endif /* IB_USER_CM_H */ diff --git a/drivers/infiniband/include/ib_user_mad.h b/drivers/infiniband/include/ib_user_mad.h deleted file mode 100644 index 44537aa32e62..000000000000 --- a/drivers/infiniband/include/ib_user_mad.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * Copyright (c) 2004 Topspin Communications. All rights reserved. - * Copyright (c) 2005 Voltaire, Inc. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * $Id: ib_user_mad.h 2814 2005-07-06 19:14:09Z halr $ - */ - -#ifndef IB_USER_MAD_H -#define IB_USER_MAD_H - -#include -#include - -/* - * Increment this value if any changes that break userspace ABI - * compatibility are made. - */ -#define IB_USER_MAD_ABI_VERSION 5 - -/* - * Make sure that all structs defined in this file remain laid out so - * that they pack the same way on 32-bit and 64-bit architectures (to - * avoid incompatibility between 32-bit userspace and 64-bit kernels). - */ - -/** - * ib_user_mad_hdr - MAD packet header - * @id - ID of agent MAD received with/to be sent with - * @status - 0 on successful receive, ETIMEDOUT if no response - * received (transaction ID in data[] will be set to TID of original - * request) (ignored on send) - * @timeout_ms - Milliseconds to wait for response (unset on receive) - * @retries - Number of automatic retries to attempt - * @qpn - Remote QP number received from/to be sent to - * @qkey - Remote Q_Key to be sent with (unset on receive) - * @lid - Remote lid received from/to be sent to - * @sl - Service level received with/to be sent with - * @path_bits - Local path bits received with/to be sent with - * @grh_present - If set, GRH was received/should be sent - * @gid_index - Local GID index to send with (unset on receive) - * @hop_limit - Hop limit in GRH - * @traffic_class - Traffic class in GRH - * @gid - Remote GID in GRH - * @flow_label - Flow label in GRH - */ -struct ib_user_mad_hdr { - __u32 id; - __u32 status; - __u32 timeout_ms; - __u32 retries; - __u32 length; - __be32 qpn; - __be32 qkey; - __be16 lid; - __u8 sl; - __u8 path_bits; - __u8 grh_present; - __u8 gid_index; - __u8 hop_limit; - __u8 traffic_class; - __u8 gid[16]; - __be32 flow_label; -}; - -/** - * ib_user_mad - MAD packet - * @hdr - MAD packet header - * @data - Contents of MAD - * - */ -struct ib_user_mad { - struct ib_user_mad_hdr hdr; - __u8 data[0]; -}; - -/** - * ib_user_mad_reg_req - MAD registration request - * @id - Set by the kernel; used to identify agent in future requests. - * @qpn - Queue pair number; must be 0 or 1. - * @method_mask - The caller will receive unsolicited MADs for any method - * where @method_mask = 1. - * @mgmt_class - Indicates which management class of MADs should be receive - * by the caller. This field is only required if the user wishes to - * receive unsolicited MADs, otherwise it should be 0. - * @mgmt_class_version - Indicates which version of MADs for the given - * management class to receive. - * @oui: Indicates IEEE OUI when mgmt_class is a vendor class - * in the range from 0x30 to 0x4f. Otherwise not used. - * @rmpp_version: If set, indicates the RMPP version used. - * - */ -struct ib_user_mad_reg_req { - __u32 id; - __u32 method_mask[4]; - __u8 qpn; - __u8 mgmt_class; - __u8 mgmt_class_version; - __u8 oui[3]; - __u8 rmpp_version; -}; - -#define IB_IOCTL_MAGIC 0x1b - -#define IB_USER_MAD_REGISTER_AGENT _IOWR(IB_IOCTL_MAGIC, 1, \ - struct ib_user_mad_reg_req) - -#define IB_USER_MAD_UNREGISTER_AGENT _IOW(IB_IOCTL_MAGIC, 2, __u32) - -#endif /* IB_USER_MAD_H */ diff --git a/drivers/infiniband/include/ib_user_verbs.h b/drivers/infiniband/include/ib_user_verbs.h deleted file mode 100644 index 7ebb01c8f996..000000000000 --- a/drivers/infiniband/include/ib_user_verbs.h +++ /dev/null @@ -1,422 +0,0 @@ -/* - * Copyright (c) 2005 Topspin Communications. All rights reserved. - * Copyright (c) 2005 Cisco Systems. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * $Id: ib_user_verbs.h 2708 2005-06-24 17:27:21Z roland $ - */ - -#ifndef IB_USER_VERBS_H -#define IB_USER_VERBS_H - -#include - -/* - * Increment this value if any changes that break userspace ABI - * compatibility are made. - */ -#define IB_USER_VERBS_ABI_VERSION 1 - -enum { - IB_USER_VERBS_CMD_QUERY_PARAMS, - IB_USER_VERBS_CMD_GET_CONTEXT, - IB_USER_VERBS_CMD_QUERY_DEVICE, - IB_USER_VERBS_CMD_QUERY_PORT, - IB_USER_VERBS_CMD_QUERY_GID, - IB_USER_VERBS_CMD_QUERY_PKEY, - IB_USER_VERBS_CMD_ALLOC_PD, - IB_USER_VERBS_CMD_DEALLOC_PD, - IB_USER_VERBS_CMD_CREATE_AH, - IB_USER_VERBS_CMD_MODIFY_AH, - IB_USER_VERBS_CMD_QUERY_AH, - IB_USER_VERBS_CMD_DESTROY_AH, - IB_USER_VERBS_CMD_REG_MR, - IB_USER_VERBS_CMD_REG_SMR, - IB_USER_VERBS_CMD_REREG_MR, - IB_USER_VERBS_CMD_QUERY_MR, - IB_USER_VERBS_CMD_DEREG_MR, - IB_USER_VERBS_CMD_ALLOC_MW, - IB_USER_VERBS_CMD_BIND_MW, - IB_USER_VERBS_CMD_DEALLOC_MW, - IB_USER_VERBS_CMD_CREATE_CQ, - IB_USER_VERBS_CMD_RESIZE_CQ, - IB_USER_VERBS_CMD_DESTROY_CQ, - IB_USER_VERBS_CMD_POLL_CQ, - IB_USER_VERBS_CMD_PEEK_CQ, - IB_USER_VERBS_CMD_REQ_NOTIFY_CQ, - IB_USER_VERBS_CMD_CREATE_QP, - IB_USER_VERBS_CMD_QUERY_QP, - IB_USER_VERBS_CMD_MODIFY_QP, - IB_USER_VERBS_CMD_DESTROY_QP, - IB_USER_VERBS_CMD_POST_SEND, - IB_USER_VERBS_CMD_POST_RECV, - IB_USER_VERBS_CMD_ATTACH_MCAST, - IB_USER_VERBS_CMD_DETACH_MCAST, - IB_USER_VERBS_CMD_CREATE_SRQ, - IB_USER_VERBS_CMD_MODIFY_SRQ, - IB_USER_VERBS_CMD_QUERY_SRQ, - IB_USER_VERBS_CMD_DESTROY_SRQ, - IB_USER_VERBS_CMD_POST_SRQ_RECV -}; - -/* - * Make sure that all structs defined in this file remain laid out so - * that they pack the same way on 32-bit and 64-bit architectures (to - * avoid incompatibility between 32-bit userspace and 64-bit kernels). - * In particular do not use pointer types -- pass pointers in __u64 - * instead. - */ - -struct ib_uverbs_async_event_desc { - __u64 element; - __u32 event_type; /* enum ib_event_type */ - __u32 reserved; -}; - -struct ib_uverbs_comp_event_desc { - __u64 cq_handle; -}; - -/* - * All commands from userspace should start with a __u32 command field - * followed by __u16 in_words and out_words fields (which give the - * length of the command block and response buffer if any in 32-bit - * words). The kernel driver will read these fields first and read - * the rest of the command struct based on these value. - */ - -struct ib_uverbs_cmd_hdr { - __u32 command; - __u16 in_words; - __u16 out_words; -}; - -/* - * No driver_data for "query params" command, since this is intended - * to be a core function with no possible device dependence. - */ -struct ib_uverbs_query_params { - __u64 response; -}; - -struct ib_uverbs_query_params_resp { - __u32 num_cq_events; -}; - -struct ib_uverbs_get_context { - __u64 response; - __u64 cq_fd_tab; - __u64 driver_data[0]; -}; - -struct ib_uverbs_get_context_resp { - __u32 async_fd; - __u32 reserved; -}; - -struct ib_uverbs_query_device { - __u64 response; - __u64 driver_data[0]; -}; - -struct ib_uverbs_query_device_resp { - __u64 fw_ver; - __be64 node_guid; - __be64 sys_image_guid; - __u64 max_mr_size; - __u64 page_size_cap; - __u32 vendor_id; - __u32 vendor_part_id; - __u32 hw_ver; - __u32 max_qp; - __u32 max_qp_wr; - __u32 device_cap_flags; - __u32 max_sge; - __u32 max_sge_rd; - __u32 max_cq; - __u32 max_cqe; - __u32 max_mr; - __u32 max_pd; - __u32 max_qp_rd_atom; - __u32 max_ee_rd_atom; - __u32 max_res_rd_atom; - __u32 max_qp_init_rd_atom; - __u32 max_ee_init_rd_atom; - __u32 atomic_cap; - __u32 max_ee; - __u32 max_rdd; - __u32 max_mw; - __u32 max_raw_ipv6_qp; - __u32 max_raw_ethy_qp; - __u32 max_mcast_grp; - __u32 max_mcast_qp_attach; - __u32 max_total_mcast_qp_attach; - __u32 max_ah; - __u32 max_fmr; - __u32 max_map_per_fmr; - __u32 max_srq; - __u32 max_srq_wr; - __u32 max_srq_sge; - __u16 max_pkeys; - __u8 local_ca_ack_delay; - __u8 phys_port_cnt; - __u8 reserved[4]; -}; - -struct ib_uverbs_query_port { - __u64 response; - __u8 port_num; - __u8 reserved[7]; - __u64 driver_data[0]; -}; - -struct ib_uverbs_query_port_resp { - __u32 port_cap_flags; - __u32 max_msg_sz; - __u32 bad_pkey_cntr; - __u32 qkey_viol_cntr; - __u32 gid_tbl_len; - __u16 pkey_tbl_len; - __u16 lid; - __u16 sm_lid; - __u8 state; - __u8 max_mtu; - __u8 active_mtu; - __u8 lmc; - __u8 max_vl_num; - __u8 sm_sl; - __u8 subnet_timeout; - __u8 init_type_reply; - __u8 active_width; - __u8 active_speed; - __u8 phys_state; - __u8 reserved[3]; -}; - -struct ib_uverbs_query_gid { - __u64 response; - __u8 port_num; - __u8 index; - __u8 reserved[6]; - __u64 driver_data[0]; -}; - -struct ib_uverbs_query_gid_resp { - __u8 gid[16]; -}; - -struct ib_uverbs_query_pkey { - __u64 response; - __u8 port_num; - __u8 index; - __u8 reserved[6]; - __u64 driver_data[0]; -}; - -struct ib_uverbs_query_pkey_resp { - __u16 pkey; - __u16 reserved; -}; - -struct ib_uverbs_alloc_pd { - __u64 response; - __u64 driver_data[0]; -}; - -struct ib_uverbs_alloc_pd_resp { - __u32 pd_handle; -}; - -struct ib_uverbs_dealloc_pd { - __u32 pd_handle; -}; - -struct ib_uverbs_reg_mr { - __u64 response; - __u64 start; - __u64 length; - __u64 hca_va; - __u32 pd_handle; - __u32 access_flags; - __u64 driver_data[0]; -}; - -struct ib_uverbs_reg_mr_resp { - __u32 mr_handle; - __u32 lkey; - __u32 rkey; -}; - -struct ib_uverbs_dereg_mr { - __u32 mr_handle; -}; - -struct ib_uverbs_create_cq { - __u64 response; - __u64 user_handle; - __u32 cqe; - __u32 event_handler; - __u64 driver_data[0]; -}; - -struct ib_uverbs_create_cq_resp { - __u32 cq_handle; - __u32 cqe; -}; - -struct ib_uverbs_destroy_cq { - __u32 cq_handle; -}; - -struct ib_uverbs_create_qp { - __u64 response; - __u64 user_handle; - __u32 pd_handle; - __u32 send_cq_handle; - __u32 recv_cq_handle; - __u32 srq_handle; - __u32 max_send_wr; - __u32 max_recv_wr; - __u32 max_send_sge; - __u32 max_recv_sge; - __u32 max_inline_data; - __u8 sq_sig_all; - __u8 qp_type; - __u8 is_srq; - __u8 reserved; - __u64 driver_data[0]; -}; - -struct ib_uverbs_create_qp_resp { - __u32 qp_handle; - __u32 qpn; -}; - -/* - * This struct needs to remain a multiple of 8 bytes to keep the - * alignment of the modify QP parameters. - */ -struct ib_uverbs_qp_dest { - __u8 dgid[16]; - __u32 flow_label; - __u16 dlid; - __u16 reserved; - __u8 sgid_index; - __u8 hop_limit; - __u8 traffic_class; - __u8 sl; - __u8 src_path_bits; - __u8 static_rate; - __u8 is_global; - __u8 port_num; -}; - -struct ib_uverbs_modify_qp { - struct ib_uverbs_qp_dest dest; - struct ib_uverbs_qp_dest alt_dest; - __u32 qp_handle; - __u32 attr_mask; - __u32 qkey; - __u32 rq_psn; - __u32 sq_psn; - __u32 dest_qp_num; - __u32 qp_access_flags; - __u16 pkey_index; - __u16 alt_pkey_index; - __u8 qp_state; - __u8 cur_qp_state; - __u8 path_mtu; - __u8 path_mig_state; - __u8 en_sqd_async_notify; - __u8 max_rd_atomic; - __u8 max_dest_rd_atomic; - __u8 min_rnr_timer; - __u8 port_num; - __u8 timeout; - __u8 retry_cnt; - __u8 rnr_retry; - __u8 alt_port_num; - __u8 alt_timeout; - __u8 reserved[2]; - __u64 driver_data[0]; -}; - -struct ib_uverbs_modify_qp_resp { -}; - -struct ib_uverbs_destroy_qp { - __u32 qp_handle; -}; - -struct ib_uverbs_attach_mcast { - __u8 gid[16]; - __u32 qp_handle; - __u16 mlid; - __u16 reserved; - __u64 driver_data[0]; -}; - -struct ib_uverbs_detach_mcast { - __u8 gid[16]; - __u32 qp_handle; - __u16 mlid; - __u16 reserved; - __u64 driver_data[0]; -}; - -struct ib_uverbs_create_srq { - __u64 response; - __u64 user_handle; - __u32 pd_handle; - __u32 max_wr; - __u32 max_sge; - __u32 srq_limit; - __u64 driver_data[0]; -}; - -struct ib_uverbs_create_srq_resp { - __u32 srq_handle; -}; - -struct ib_uverbs_modify_srq { - __u32 srq_handle; - __u32 attr_mask; - __u32 max_wr; - __u32 max_sge; - __u32 srq_limit; - __u32 reserved; - __u64 driver_data[0]; -}; - -struct ib_uverbs_destroy_srq { - __u32 srq_handle; -}; - -#endif /* IB_USER_VERBS_H */ diff --git a/drivers/infiniband/include/ib_verbs.h b/drivers/infiniband/include/ib_verbs.h deleted file mode 100644 index e16cf94870f2..000000000000 --- a/drivers/infiniband/include/ib_verbs.h +++ /dev/null @@ -1,1461 +0,0 @@ -/* - * Copyright (c) 2004 Mellanox Technologies Ltd. All rights reserved. - * Copyright (c) 2004 Infinicon Corporation. All rights reserved. - * Copyright (c) 2004 Intel Corporation. All rights reserved. - * Copyright (c) 2004 Topspin Corporation. All rights reserved. - * Copyright (c) 2004 Voltaire Corporation. All rights reserved. - * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. - * Copyright (c) 2005 Cisco Systems. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * $Id: ib_verbs.h 1349 2004-12-16 21:09:43Z roland $ - */ - -#if !defined(IB_VERBS_H) -#define IB_VERBS_H - -#include -#include - -#include -#include -#include - -union ib_gid { - u8 raw[16]; - struct { - __be64 subnet_prefix; - __be64 interface_id; - } global; -}; - -enum ib_node_type { - IB_NODE_CA = 1, - IB_NODE_SWITCH, - IB_NODE_ROUTER -}; - -enum ib_device_cap_flags { - IB_DEVICE_RESIZE_MAX_WR = 1, - IB_DEVICE_BAD_PKEY_CNTR = (1<<1), - IB_DEVICE_BAD_QKEY_CNTR = (1<<2), - IB_DEVICE_RAW_MULTI = (1<<3), - IB_DEVICE_AUTO_PATH_MIG = (1<<4), - IB_DEVICE_CHANGE_PHY_PORT = (1<<5), - IB_DEVICE_UD_AV_PORT_ENFORCE = (1<<6), - IB_DEVICE_CURR_QP_STATE_MOD = (1<<7), - IB_DEVICE_SHUTDOWN_PORT = (1<<8), - IB_DEVICE_INIT_TYPE = (1<<9), - IB_DEVICE_PORT_ACTIVE_EVENT = (1<<10), - IB_DEVICE_SYS_IMAGE_GUID = (1<<11), - IB_DEVICE_RC_RNR_NAK_GEN = (1<<12), - IB_DEVICE_SRQ_RESIZE = (1<<13), - IB_DEVICE_N_NOTIFY_CQ = (1<<14), -}; - -enum ib_atomic_cap { - IB_ATOMIC_NONE, - IB_ATOMIC_HCA, - IB_ATOMIC_GLOB -}; - -struct ib_device_attr { - u64 fw_ver; - __be64 node_guid; - __be64 sys_image_guid; - u64 max_mr_size; - u64 page_size_cap; - u32 vendor_id; - u32 vendor_part_id; - u32 hw_ver; - int max_qp; - int max_qp_wr; - int device_cap_flags; - int max_sge; - int max_sge_rd; - int max_cq; - int max_cqe; - int max_mr; - int max_pd; - int max_qp_rd_atom; - int max_ee_rd_atom; - int max_res_rd_atom; - int max_qp_init_rd_atom; - int max_ee_init_rd_atom; - enum ib_atomic_cap atomic_cap; - int max_ee; - int max_rdd; - int max_mw; - int max_raw_ipv6_qp; - int max_raw_ethy_qp; - int max_mcast_grp; - int max_mcast_qp_attach; - int max_total_mcast_qp_attach; - int max_ah; - int max_fmr; - int max_map_per_fmr; - int max_srq; - int max_srq_wr; - int max_srq_sge; - u16 max_pkeys; - u8 local_ca_ack_delay; -}; - -enum ib_mtu { - IB_MTU_256 = 1, - IB_MTU_512 = 2, - IB_MTU_1024 = 3, - IB_MTU_2048 = 4, - IB_MTU_4096 = 5 -}; - -static inline int ib_mtu_enum_to_int(enum ib_mtu mtu) -{ - switch (mtu) { - case IB_MTU_256: return 256; - case IB_MTU_512: return 512; - case IB_MTU_1024: return 1024; - case IB_MTU_2048: return 2048; - case IB_MTU_4096: return 4096; - default: return -1; - } -} - -enum ib_port_state { - IB_PORT_NOP = 0, - IB_PORT_DOWN = 1, - IB_PORT_INIT = 2, - IB_PORT_ARMED = 3, - IB_PORT_ACTIVE = 4, - IB_PORT_ACTIVE_DEFER = 5 -}; - -enum ib_port_cap_flags { - IB_PORT_SM = 1 << 1, - IB_PORT_NOTICE_SUP = 1 << 2, - IB_PORT_TRAP_SUP = 1 << 3, - IB_PORT_OPT_IPD_SUP = 1 << 4, - IB_PORT_AUTO_MIGR_SUP = 1 << 5, - IB_PORT_SL_MAP_SUP = 1 << 6, - IB_PORT_MKEY_NVRAM = 1 << 7, - IB_PORT_PKEY_NVRAM = 1 << 8, - IB_PORT_LED_INFO_SUP = 1 << 9, - IB_PORT_SM_DISABLED = 1 << 10, - IB_PORT_SYS_IMAGE_GUID_SUP = 1 << 11, - IB_PORT_PKEY_SW_EXT_PORT_TRAP_SUP = 1 << 12, - IB_PORT_CM_SUP = 1 << 16, - IB_PORT_SNMP_TUNNEL_SUP = 1 << 17, - IB_PORT_REINIT_SUP = 1 << 18, - IB_PORT_DEVICE_MGMT_SUP = 1 << 19, - IB_PORT_VENDOR_CLASS_SUP = 1 << 20, - IB_PORT_DR_NOTICE_SUP = 1 << 21, - IB_PORT_CAP_MASK_NOTICE_SUP = 1 << 22, - IB_PORT_BOOT_MGMT_SUP = 1 << 23, - IB_PORT_LINK_LATENCY_SUP = 1 << 24, - IB_PORT_CLIENT_REG_SUP = 1 << 25 -}; - -enum ib_port_width { - IB_WIDTH_1X = 1, - IB_WIDTH_4X = 2, - IB_WIDTH_8X = 4, - IB_WIDTH_12X = 8 -}; - -static inline int ib_width_enum_to_int(enum ib_port_width width) -{ - switch (width) { - case IB_WIDTH_1X: return 1; - case IB_WIDTH_4X: return 4; - case IB_WIDTH_8X: return 8; - case IB_WIDTH_12X: return 12; - default: return -1; - } -} - -struct ib_port_attr { - enum ib_port_state state; - enum ib_mtu max_mtu; - enum ib_mtu active_mtu; - int gid_tbl_len; - u32 port_cap_flags; - u32 max_msg_sz; - u32 bad_pkey_cntr; - u32 qkey_viol_cntr; - u16 pkey_tbl_len; - u16 lid; - u16 sm_lid; - u8 lmc; - u8 max_vl_num; - u8 sm_sl; - u8 subnet_timeout; - u8 init_type_reply; - u8 active_width; - u8 active_speed; - u8 phys_state; -}; - -enum ib_device_modify_flags { - IB_DEVICE_MODIFY_SYS_IMAGE_GUID = 1 -}; - -struct ib_device_modify { - u64 sys_image_guid; -}; - -enum ib_port_modify_flags { - IB_PORT_SHUTDOWN = 1, - IB_PORT_INIT_TYPE = (1<<2), - IB_PORT_RESET_QKEY_CNTR = (1<<3) -}; - -struct ib_port_modify { - u32 set_port_cap_mask; - u32 clr_port_cap_mask; - u8 init_type; -}; - -enum ib_event_type { - IB_EVENT_CQ_ERR, - IB_EVENT_QP_FATAL, - IB_EVENT_QP_REQ_ERR, - IB_EVENT_QP_ACCESS_ERR, - IB_EVENT_COMM_EST, - IB_EVENT_SQ_DRAINED, - IB_EVENT_PATH_MIG, - IB_EVENT_PATH_MIG_ERR, - IB_EVENT_DEVICE_FATAL, - IB_EVENT_PORT_ACTIVE, - IB_EVENT_PORT_ERR, - IB_EVENT_LID_CHANGE, - IB_EVENT_PKEY_CHANGE, - IB_EVENT_SM_CHANGE, - IB_EVENT_SRQ_ERR, - IB_EVENT_SRQ_LIMIT_REACHED, - IB_EVENT_QP_LAST_WQE_REACHED -}; - -struct ib_event { - struct ib_device *device; - union { - struct ib_cq *cq; - struct ib_qp *qp; - struct ib_srq *srq; - u8 port_num; - } element; - enum ib_event_type event; -}; - -struct ib_event_handler { - struct ib_device *device; - void (*handler)(struct ib_event_handler *, struct ib_event *); - struct list_head list; -}; - -#define INIT_IB_EVENT_HANDLER(_ptr, _device, _handler) \ - do { \ - (_ptr)->device = _device; \ - (_ptr)->handler = _handler; \ - INIT_LIST_HEAD(&(_ptr)->list); \ - } while (0) - -struct ib_global_route { - union ib_gid dgid; - u32 flow_label; - u8 sgid_index; - u8 hop_limit; - u8 traffic_class; -}; - -struct ib_grh { - __be32 version_tclass_flow; - __be16 paylen; - u8 next_hdr; - u8 hop_limit; - union ib_gid sgid; - union ib_gid dgid; -}; - -enum { - IB_MULTICAST_QPN = 0xffffff -}; - -#define IB_LID_PERMISSIVE __constant_htons(0xFFFF) - -enum ib_ah_flags { - IB_AH_GRH = 1 -}; - -struct ib_ah_attr { - struct ib_global_route grh; - u16 dlid; - u8 sl; - u8 src_path_bits; - u8 static_rate; - u8 ah_flags; - u8 port_num; -}; - -enum ib_wc_status { - IB_WC_SUCCESS, - IB_WC_LOC_LEN_ERR, - IB_WC_LOC_QP_OP_ERR, - IB_WC_LOC_EEC_OP_ERR, - IB_WC_LOC_PROT_ERR, - IB_WC_WR_FLUSH_ERR, - IB_WC_MW_BIND_ERR, - IB_WC_BAD_RESP_ERR, - IB_WC_LOC_ACCESS_ERR, - IB_WC_REM_INV_REQ_ERR, - IB_WC_REM_ACCESS_ERR, - IB_WC_REM_OP_ERR, - IB_WC_RETRY_EXC_ERR, - IB_WC_RNR_RETRY_EXC_ERR, - IB_WC_LOC_RDD_VIOL_ERR, - IB_WC_REM_INV_RD_REQ_ERR, - IB_WC_REM_ABORT_ERR, - IB_WC_INV_EECN_ERR, - IB_WC_INV_EEC_STATE_ERR, - IB_WC_FATAL_ERR, - IB_WC_RESP_TIMEOUT_ERR, - IB_WC_GENERAL_ERR -}; - -enum ib_wc_opcode { - IB_WC_SEND, - IB_WC_RDMA_WRITE, - IB_WC_RDMA_READ, - IB_WC_COMP_SWAP, - IB_WC_FETCH_ADD, - IB_WC_BIND_MW, -/* - * Set value of IB_WC_RECV so consumers can test if a completion is a - * receive by testing (opcode & IB_WC_RECV). - */ - IB_WC_RECV = 1 << 7, - IB_WC_RECV_RDMA_WITH_IMM -}; - -enum ib_wc_flags { - IB_WC_GRH = 1, - IB_WC_WITH_IMM = (1<<1) -}; - -struct ib_wc { - u64 wr_id; - enum ib_wc_status status; - enum ib_wc_opcode opcode; - u32 vendor_err; - u32 byte_len; - __be32 imm_data; - u32 qp_num; - u32 src_qp; - int wc_flags; - u16 pkey_index; - u16 slid; - u8 sl; - u8 dlid_path_bits; - u8 port_num; /* valid only for DR SMPs on switches */ -}; - -enum ib_cq_notify { - IB_CQ_SOLICITED, - IB_CQ_NEXT_COMP -}; - -enum ib_srq_attr_mask { - IB_SRQ_MAX_WR = 1 << 0, - IB_SRQ_LIMIT = 1 << 1, -}; - -struct ib_srq_attr { - u32 max_wr; - u32 max_sge; - u32 srq_limit; -}; - -struct ib_srq_init_attr { - void (*event_handler)(struct ib_event *, void *); - void *srq_context; - struct ib_srq_attr attr; -}; - -struct ib_qp_cap { - u32 max_send_wr; - u32 max_recv_wr; - u32 max_send_sge; - u32 max_recv_sge; - u32 max_inline_data; -}; - -enum ib_sig_type { - IB_SIGNAL_ALL_WR, - IB_SIGNAL_REQ_WR -}; - -enum ib_qp_type { - /* - * IB_QPT_SMI and IB_QPT_GSI have to be the first two entries - * here (and in that order) since the MAD layer uses them as - * indices into a 2-entry table. - */ - IB_QPT_SMI, - IB_QPT_GSI, - - IB_QPT_RC, - IB_QPT_UC, - IB_QPT_UD, - IB_QPT_RAW_IPV6, - IB_QPT_RAW_ETY -}; - -struct ib_qp_init_attr { - void (*event_handler)(struct ib_event *, void *); - void *qp_context; - struct ib_cq *send_cq; - struct ib_cq *recv_cq; - struct ib_srq *srq; - struct ib_qp_cap cap; - enum ib_sig_type sq_sig_type; - enum ib_qp_type qp_type; - u8 port_num; /* special QP types only */ -}; - -enum ib_rnr_timeout { - IB_RNR_TIMER_655_36 = 0, - IB_RNR_TIMER_000_01 = 1, - IB_RNR_TIMER_000_02 = 2, - IB_RNR_TIMER_000_03 = 3, - IB_RNR_TIMER_000_04 = 4, - IB_RNR_TIMER_000_06 = 5, - IB_RNR_TIMER_000_08 = 6, - IB_RNR_TIMER_000_12 = 7, - IB_RNR_TIMER_000_16 = 8, - IB_RNR_TIMER_000_24 = 9, - IB_RNR_TIMER_000_32 = 10, - IB_RNR_TIMER_000_48 = 11, - IB_RNR_TIMER_000_64 = 12, - IB_RNR_TIMER_000_96 = 13, - IB_RNR_TIMER_001_28 = 14, - IB_RNR_TIMER_001_92 = 15, - IB_RNR_TIMER_002_56 = 16, - IB_RNR_TIMER_003_84 = 17, - IB_RNR_TIMER_005_12 = 18, - IB_RNR_TIMER_007_68 = 19, - IB_RNR_TIMER_010_24 = 20, - IB_RNR_TIMER_015_36 = 21, - IB_RNR_TIMER_020_48 = 22, - IB_RNR_TIMER_030_72 = 23, - IB_RNR_TIMER_040_96 = 24, - IB_RNR_TIMER_061_44 = 25, - IB_RNR_TIMER_081_92 = 26, - IB_RNR_TIMER_122_88 = 27, - IB_RNR_TIMER_163_84 = 28, - IB_RNR_TIMER_245_76 = 29, - IB_RNR_TIMER_327_68 = 30, - IB_RNR_TIMER_491_52 = 31 -}; - -enum ib_qp_attr_mask { - IB_QP_STATE = 1, - IB_QP_CUR_STATE = (1<<1), - IB_QP_EN_SQD_ASYNC_NOTIFY = (1<<2), - IB_QP_ACCESS_FLAGS = (1<<3), - IB_QP_PKEY_INDEX = (1<<4), - IB_QP_PORT = (1<<5), - IB_QP_QKEY = (1<<6), - IB_QP_AV = (1<<7), - IB_QP_PATH_MTU = (1<<8), - IB_QP_TIMEOUT = (1<<9), - IB_QP_RETRY_CNT = (1<<10), - IB_QP_RNR_RETRY = (1<<11), - IB_QP_RQ_PSN = (1<<12), - IB_QP_MAX_QP_RD_ATOMIC = (1<<13), - IB_QP_ALT_PATH = (1<<14), - IB_QP_MIN_RNR_TIMER = (1<<15), - IB_QP_SQ_PSN = (1<<16), - IB_QP_MAX_DEST_RD_ATOMIC = (1<<17), - IB_QP_PATH_MIG_STATE = (1<<18), - IB_QP_CAP = (1<<19), - IB_QP_DEST_QPN = (1<<20) -}; - -enum ib_qp_state { - IB_QPS_RESET, - IB_QPS_INIT, - IB_QPS_RTR, - IB_QPS_RTS, - IB_QPS_SQD, - IB_QPS_SQE, - IB_QPS_ERR -}; - -enum ib_mig_state { - IB_MIG_MIGRATED, - IB_MIG_REARM, - IB_MIG_ARMED -}; - -struct ib_qp_attr { - enum ib_qp_state qp_state; - enum ib_qp_state cur_qp_state; - enum ib_mtu path_mtu; - enum ib_mig_state path_mig_state; - u32 qkey; - u32 rq_psn; - u32 sq_psn; - u32 dest_qp_num; - int qp_access_flags; - struct ib_qp_cap cap; - struct ib_ah_attr ah_attr; - struct ib_ah_attr alt_ah_attr; - u16 pkey_index; - u16 alt_pkey_index; - u8 en_sqd_async_notify; - u8 sq_draining; - u8 max_rd_atomic; - u8 max_dest_rd_atomic; - u8 min_rnr_timer; - u8 port_num; - u8 timeout; - u8 retry_cnt; - u8 rnr_retry; - u8 alt_port_num; - u8 alt_timeout; -}; - -enum ib_wr_opcode { - IB_WR_RDMA_WRITE, - IB_WR_RDMA_WRITE_WITH_IMM, - IB_WR_SEND, - IB_WR_SEND_WITH_IMM, - IB_WR_RDMA_READ, - IB_WR_ATOMIC_CMP_AND_SWP, - IB_WR_ATOMIC_FETCH_AND_ADD -}; - -enum ib_send_flags { - IB_SEND_FENCE = 1, - IB_SEND_SIGNALED = (1<<1), - IB_SEND_SOLICITED = (1<<2), - IB_SEND_INLINE = (1<<3) -}; - -struct ib_sge { - u64 addr; - u32 length; - u32 lkey; -}; - -struct ib_send_wr { - struct ib_send_wr *next; - u64 wr_id; - struct ib_sge *sg_list; - int num_sge; - enum ib_wr_opcode opcode; - int send_flags; - __be32 imm_data; - union { - struct { - u64 remote_addr; - u32 rkey; - } rdma; - struct { - u64 remote_addr; - u64 compare_add; - u64 swap; - u32 rkey; - } atomic; - struct { - struct ib_ah *ah; - struct ib_mad_hdr *mad_hdr; - u32 remote_qpn; - u32 remote_qkey; - int timeout_ms; /* valid for MADs only */ - int retries; /* valid for MADs only */ - u16 pkey_index; /* valid for GSI only */ - u8 port_num; /* valid for DR SMPs on switch only */ - } ud; - } wr; -}; - -struct ib_recv_wr { - struct ib_recv_wr *next; - u64 wr_id; - struct ib_sge *sg_list; - int num_sge; -}; - -enum ib_access_flags { - IB_ACCESS_LOCAL_WRITE = 1, - IB_ACCESS_REMOTE_WRITE = (1<<1), - IB_ACCESS_REMOTE_READ = (1<<2), - IB_ACCESS_REMOTE_ATOMIC = (1<<3), - IB_ACCESS_MW_BIND = (1<<4) -}; - -struct ib_phys_buf { - u64 addr; - u64 size; -}; - -struct ib_mr_attr { - struct ib_pd *pd; - u64 device_virt_addr; - u64 size; - int mr_access_flags; - u32 lkey; - u32 rkey; -}; - -enum ib_mr_rereg_flags { - IB_MR_REREG_TRANS = 1, - IB_MR_REREG_PD = (1<<1), - IB_MR_REREG_ACCESS = (1<<2) -}; - -struct ib_mw_bind { - struct ib_mr *mr; - u64 wr_id; - u64 addr; - u32 length; - int send_flags; - int mw_access_flags; -}; - -struct ib_fmr_attr { - int max_pages; - int max_maps; - u8 page_size; -}; - -struct ib_ucontext { - struct ib_device *device; - struct list_head pd_list; - struct list_head mr_list; - struct list_head mw_list; - struct list_head cq_list; - struct list_head qp_list; - struct list_head srq_list; - struct list_head ah_list; - spinlock_t lock; -}; - -struct ib_uobject { - u64 user_handle; /* handle given to us by userspace */ - struct ib_ucontext *context; /* associated user context */ - struct list_head list; /* link to context's list */ - u32 id; /* index into kernel idr */ -}; - -struct ib_umem { - unsigned long user_base; - unsigned long virt_base; - size_t length; - int offset; - int page_size; - int writable; - struct list_head chunk_list; -}; - -struct ib_umem_chunk { - struct list_head list; - int nents; - int nmap; - struct scatterlist page_list[0]; -}; - -struct ib_udata { - void __user *inbuf; - void __user *outbuf; - size_t inlen; - size_t outlen; -}; - -#define IB_UMEM_MAX_PAGE_CHUNK \ - ((PAGE_SIZE - offsetof(struct ib_umem_chunk, page_list)) / \ - ((void *) &((struct ib_umem_chunk *) 0)->page_list[1] - \ - (void *) &((struct ib_umem_chunk *) 0)->page_list[0])) - -struct ib_umem_object { - struct ib_uobject uobject; - struct ib_umem umem; -}; - -struct ib_pd { - struct ib_device *device; - struct ib_uobject *uobject; - atomic_t usecnt; /* count all resources */ -}; - -struct ib_ah { - struct ib_device *device; - struct ib_pd *pd; - struct ib_uobject *uobject; -}; - -typedef void (*ib_comp_handler)(struct ib_cq *cq, void *cq_context); - -struct ib_cq { - struct ib_device *device; - struct ib_uobject *uobject; - ib_comp_handler comp_handler; - void (*event_handler)(struct ib_event *, void *); - void * cq_context; - int cqe; - atomic_t usecnt; /* count number of work queues */ -}; - -struct ib_srq { - struct ib_device *device; - struct ib_pd *pd; - struct ib_uobject *uobject; - void (*event_handler)(struct ib_event *, void *); - void *srq_context; - atomic_t usecnt; -}; - -struct ib_qp { - struct ib_device *device; - struct ib_pd *pd; - struct ib_cq *send_cq; - struct ib_cq *recv_cq; - struct ib_srq *srq; - struct ib_uobject *uobject; - void (*event_handler)(struct ib_event *, void *); - void *qp_context; - u32 qp_num; - enum ib_qp_type qp_type; -}; - -struct ib_mr { - struct ib_device *device; - struct ib_pd *pd; - struct ib_uobject *uobject; - u32 lkey; - u32 rkey; - atomic_t usecnt; /* count number of MWs */ -}; - -struct ib_mw { - struct ib_device *device; - struct ib_pd *pd; - struct ib_uobject *uobject; - u32 rkey; -}; - -struct ib_fmr { - struct ib_device *device; - struct ib_pd *pd; - struct list_head list; - u32 lkey; - u32 rkey; -}; - -struct ib_mad; -struct ib_grh; - -enum ib_process_mad_flags { - IB_MAD_IGNORE_MKEY = 1, - IB_MAD_IGNORE_BKEY = 2, - IB_MAD_IGNORE_ALL = IB_MAD_IGNORE_MKEY | IB_MAD_IGNORE_BKEY -}; - -enum ib_mad_result { - IB_MAD_RESULT_FAILURE = 0, /* (!SUCCESS is the important flag) */ - IB_MAD_RESULT_SUCCESS = 1 << 0, /* MAD was successfully processed */ - IB_MAD_RESULT_REPLY = 1 << 1, /* Reply packet needs to be sent */ - IB_MAD_RESULT_CONSUMED = 1 << 2 /* Packet consumed: stop processing */ -}; - -#define IB_DEVICE_NAME_MAX 64 - -struct ib_cache { - rwlock_t lock; - struct ib_event_handler event_handler; - struct ib_pkey_cache **pkey_cache; - struct ib_gid_cache **gid_cache; -}; - -struct ib_device { - struct device *dma_device; - - char name[IB_DEVICE_NAME_MAX]; - - struct list_head event_handler_list; - spinlock_t event_handler_lock; - - struct list_head core_list; - struct list_head client_data_list; - spinlock_t client_data_lock; - - struct ib_cache cache; - - u32 flags; - - int (*query_device)(struct ib_device *device, - struct ib_device_attr *device_attr); - int (*query_port)(struct ib_device *device, - u8 port_num, - struct ib_port_attr *port_attr); - int (*query_gid)(struct ib_device *device, - u8 port_num, int index, - union ib_gid *gid); - int (*query_pkey)(struct ib_device *device, - u8 port_num, u16 index, u16 *pkey); - int (*modify_device)(struct ib_device *device, - int device_modify_mask, - struct ib_device_modify *device_modify); - int (*modify_port)(struct ib_device *device, - u8 port_num, int port_modify_mask, - struct ib_port_modify *port_modify); - struct ib_ucontext * (*alloc_ucontext)(struct ib_device *device, - struct ib_udata *udata); - int (*dealloc_ucontext)(struct ib_ucontext *context); - int (*mmap)(struct ib_ucontext *context, - struct vm_area_struct *vma); - struct ib_pd * (*alloc_pd)(struct ib_device *device, - struct ib_ucontext *context, - struct ib_udata *udata); - int (*dealloc_pd)(struct ib_pd *pd); - struct ib_ah * (*create_ah)(struct ib_pd *pd, - struct ib_ah_attr *ah_attr); - int (*modify_ah)(struct ib_ah *ah, - struct ib_ah_attr *ah_attr); - int (*query_ah)(struct ib_ah *ah, - struct ib_ah_attr *ah_attr); - int (*destroy_ah)(struct ib_ah *ah); - struct ib_srq * (*create_srq)(struct ib_pd *pd, - struct ib_srq_init_attr *srq_init_attr, - struct ib_udata *udata); - int (*modify_srq)(struct ib_srq *srq, - struct ib_srq_attr *srq_attr, - enum ib_srq_attr_mask srq_attr_mask); - int (*query_srq)(struct ib_srq *srq, - struct ib_srq_attr *srq_attr); - int (*destroy_srq)(struct ib_srq *srq); - int (*post_srq_recv)(struct ib_srq *srq, - struct ib_recv_wr *recv_wr, - struct ib_recv_wr **bad_recv_wr); - struct ib_qp * (*create_qp)(struct ib_pd *pd, - struct ib_qp_init_attr *qp_init_attr, - struct ib_udata *udata); - int (*modify_qp)(struct ib_qp *qp, - struct ib_qp_attr *qp_attr, - int qp_attr_mask); - int (*query_qp)(struct ib_qp *qp, - struct ib_qp_attr *qp_attr, - int qp_attr_mask, - struct ib_qp_init_attr *qp_init_attr); - int (*destroy_qp)(struct ib_qp *qp); - int (*post_send)(struct ib_qp *qp, - struct ib_send_wr *send_wr, - struct ib_send_wr **bad_send_wr); - int (*post_recv)(struct ib_qp *qp, - struct ib_recv_wr *recv_wr, - struct ib_recv_wr **bad_recv_wr); - struct ib_cq * (*create_cq)(struct ib_device *device, int cqe, - struct ib_ucontext *context, - struct ib_udata *udata); - int (*destroy_cq)(struct ib_cq *cq); - int (*resize_cq)(struct ib_cq *cq, int *cqe); - int (*poll_cq)(struct ib_cq *cq, int num_entries, - struct ib_wc *wc); - int (*peek_cq)(struct ib_cq *cq, int wc_cnt); - int (*req_notify_cq)(struct ib_cq *cq, - enum ib_cq_notify cq_notify); - int (*req_ncomp_notif)(struct ib_cq *cq, - int wc_cnt); - struct ib_mr * (*get_dma_mr)(struct ib_pd *pd, - int mr_access_flags); - struct ib_mr * (*reg_phys_mr)(struct ib_pd *pd, - struct ib_phys_buf *phys_buf_array, - int num_phys_buf, - int mr_access_flags, - u64 *iova_start); - struct ib_mr * (*reg_user_mr)(struct ib_pd *pd, - struct ib_umem *region, - int mr_access_flags, - struct ib_udata *udata); - int (*query_mr)(struct ib_mr *mr, - struct ib_mr_attr *mr_attr); - int (*dereg_mr)(struct ib_mr *mr); - int (*rereg_phys_mr)(struct ib_mr *mr, - int mr_rereg_mask, - struct ib_pd *pd, - struct ib_phys_buf *phys_buf_array, - int num_phys_buf, - int mr_access_flags, - u64 *iova_start); - struct ib_mw * (*alloc_mw)(struct ib_pd *pd); - int (*bind_mw)(struct ib_qp *qp, - struct ib_mw *mw, - struct ib_mw_bind *mw_bind); - int (*dealloc_mw)(struct ib_mw *mw); - struct ib_fmr * (*alloc_fmr)(struct ib_pd *pd, - int mr_access_flags, - struct ib_fmr_attr *fmr_attr); - int (*map_phys_fmr)(struct ib_fmr *fmr, - u64 *page_list, int list_len, - u64 iova); - int (*unmap_fmr)(struct list_head *fmr_list); - int (*dealloc_fmr)(struct ib_fmr *fmr); - int (*attach_mcast)(struct ib_qp *qp, - union ib_gid *gid, - u16 lid); - int (*detach_mcast)(struct ib_qp *qp, - union ib_gid *gid, - u16 lid); - int (*process_mad)(struct ib_device *device, - int process_mad_flags, - u8 port_num, - struct ib_wc *in_wc, - struct ib_grh *in_grh, - struct ib_mad *in_mad, - struct ib_mad *out_mad); - - struct module *owner; - struct class_device class_dev; - struct kobject ports_parent; - struct list_head port_list; - - enum { - IB_DEV_UNINITIALIZED, - IB_DEV_REGISTERED, - IB_DEV_UNREGISTERED - } reg_state; - - u8 node_type; - u8 phys_port_cnt; -}; - -struct ib_client { - char *name; - void (*add) (struct ib_device *); - void (*remove)(struct ib_device *); - - struct list_head list; -}; - -struct ib_device *ib_alloc_device(size_t size); -void ib_dealloc_device(struct ib_device *device); - -int ib_register_device (struct ib_device *device); -void ib_unregister_device(struct ib_device *device); - -int ib_register_client (struct ib_client *client); -void ib_unregister_client(struct ib_client *client); - -void *ib_get_client_data(struct ib_device *device, struct ib_client *client); -void ib_set_client_data(struct ib_device *device, struct ib_client *client, - void *data); - -static inline int ib_copy_from_udata(void *dest, struct ib_udata *udata, size_t len) -{ - return copy_from_user(dest, udata->inbuf, len) ? -EFAULT : 0; -} - -static inline int ib_copy_to_udata(struct ib_udata *udata, void *src, size_t len) -{ - return copy_to_user(udata->outbuf, src, len) ? -EFAULT : 0; -} - -int ib_register_event_handler (struct ib_event_handler *event_handler); -int ib_unregister_event_handler(struct ib_event_handler *event_handler); -void ib_dispatch_event(struct ib_event *event); - -int ib_query_device(struct ib_device *device, - struct ib_device_attr *device_attr); - -int ib_query_port(struct ib_device *device, - u8 port_num, struct ib_port_attr *port_attr); - -int ib_query_gid(struct ib_device *device, - u8 port_num, int index, union ib_gid *gid); - -int ib_query_pkey(struct ib_device *device, - u8 port_num, u16 index, u16 *pkey); - -int ib_modify_device(struct ib_device *device, - int device_modify_mask, - struct ib_device_modify *device_modify); - -int ib_modify_port(struct ib_device *device, - u8 port_num, int port_modify_mask, - struct ib_port_modify *port_modify); - -/** - * ib_alloc_pd - Allocates an unused protection domain. - * @device: The device on which to allocate the protection domain. - * - * A protection domain object provides an association between QPs, shared - * receive queues, address handles, memory regions, and memory windows. - */ -struct ib_pd *ib_alloc_pd(struct ib_device *device); - -/** - * ib_dealloc_pd - Deallocates a protection domain. - * @pd: The protection domain to deallocate. - */ -int ib_dealloc_pd(struct ib_pd *pd); - -/** - * ib_create_ah - Creates an address handle for the given address vector. - * @pd: The protection domain associated with the address handle. - * @ah_attr: The attributes of the address vector. - * - * The address handle is used to reference a local or global destination - * in all UD QP post sends. - */ -struct ib_ah *ib_create_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr); - -/** - * ib_create_ah_from_wc - Creates an address handle associated with the - * sender of the specified work completion. - * @pd: The protection domain associated with the address handle. - * @wc: Work completion information associated with a received message. - * @grh: References the received global route header. This parameter is - * ignored unless the work completion indicates that the GRH is valid. - * @port_num: The outbound port number to associate with the address. - * - * The address handle is used to reference a local or global destination - * in all UD QP post sends. - */ -struct ib_ah *ib_create_ah_from_wc(struct ib_pd *pd, struct ib_wc *wc, - struct ib_grh *grh, u8 port_num); - -/** - * ib_modify_ah - Modifies the address vector associated with an address - * handle. - * @ah: The address handle to modify. - * @ah_attr: The new address vector attributes to associate with the - * address handle. - */ -int ib_modify_ah(struct ib_ah *ah, struct ib_ah_attr *ah_attr); - -/** - * ib_query_ah - Queries the address vector associated with an address - * handle. - * @ah: The address handle to query. - * @ah_attr: The address vector attributes associated with the address - * handle. - */ -int ib_query_ah(struct ib_ah *ah, struct ib_ah_attr *ah_attr); - -/** - * ib_destroy_ah - Destroys an address handle. - * @ah: The address handle to destroy. - */ -int ib_destroy_ah(struct ib_ah *ah); - -/** - * ib_create_srq - Creates a SRQ associated with the specified protection - * domain. - * @pd: The protection domain associated with the SRQ. - * @srq_init_attr: A list of initial attributes required to create the SRQ. - * - * srq_attr->max_wr and srq_attr->max_sge are read the determine the - * requested size of the SRQ, and set to the actual values allocated - * on return. If ib_create_srq() succeeds, then max_wr and max_sge - * will always be at least as large as the requested values. - */ -struct ib_srq *ib_create_srq(struct ib_pd *pd, - struct ib_srq_init_attr *srq_init_attr); - -/** - * ib_modify_srq - Modifies the attributes for the specified SRQ. - * @srq: The SRQ to modify. - * @srq_attr: On input, specifies the SRQ attributes to modify. On output, - * the current values of selected SRQ attributes are returned. - * @srq_attr_mask: A bit-mask used to specify which attributes of the SRQ - * are being modified. - * - * The mask may contain IB_SRQ_MAX_WR to resize the SRQ and/or - * IB_SRQ_LIMIT to set the SRQ's limit and request notification when - * the number of receives queued drops below the limit. - */ -int ib_modify_srq(struct ib_srq *srq, - struct ib_srq_attr *srq_attr, - enum ib_srq_attr_mask srq_attr_mask); - -/** - * ib_query_srq - Returns the attribute list and current values for the - * specified SRQ. - * @srq: The SRQ to query. - * @srq_attr: The attributes of the specified SRQ. - */ -int ib_query_srq(struct ib_srq *srq, - struct ib_srq_attr *srq_attr); - -/** - * ib_destroy_srq - Destroys the specified SRQ. - * @srq: The SRQ to destroy. - */ -int ib_destroy_srq(struct ib_srq *srq); - -/** - * ib_post_srq_recv - Posts a list of work requests to the specified SRQ. - * @srq: The SRQ to post the work request on. - * @recv_wr: A list of work requests to post on the receive queue. - * @bad_recv_wr: On an immediate failure, this parameter will reference - * the work request that failed to be posted on the QP. - */ -static inline int ib_post_srq_recv(struct ib_srq *srq, - struct ib_recv_wr *recv_wr, - struct ib_recv_wr **bad_recv_wr) -{ - return srq->device->post_srq_recv(srq, recv_wr, bad_recv_wr); -} - -/** - * ib_create_qp - Creates a QP associated with the specified protection - * domain. - * @pd: The protection domain associated with the QP. - * @qp_init_attr: A list of initial attributes required to create the QP. - */ -struct ib_qp *ib_create_qp(struct ib_pd *pd, - struct ib_qp_init_attr *qp_init_attr); - -/** - * ib_modify_qp - Modifies the attributes for the specified QP and then - * transitions the QP to the given state. - * @qp: The QP to modify. - * @qp_attr: On input, specifies the QP attributes to modify. On output, - * the current values of selected QP attributes are returned. - * @qp_attr_mask: A bit-mask used to specify which attributes of the QP - * are being modified. - */ -int ib_modify_qp(struct ib_qp *qp, - struct ib_qp_attr *qp_attr, - int qp_attr_mask); - -/** - * ib_query_qp - Returns the attribute list and current values for the - * specified QP. - * @qp: The QP to query. - * @qp_attr: The attributes of the specified QP. - * @qp_attr_mask: A bit-mask used to select specific attributes to query. - * @qp_init_attr: Additional attributes of the selected QP. - * - * The qp_attr_mask may be used to limit the query to gathering only the - * selected attributes. - */ -int ib_query_qp(struct ib_qp *qp, - struct ib_qp_attr *qp_attr, - int qp_attr_mask, - struct ib_qp_init_attr *qp_init_attr); - -/** - * ib_destroy_qp - Destroys the specified QP. - * @qp: The QP to destroy. - */ -int ib_destroy_qp(struct ib_qp *qp); - -/** - * ib_post_send - Posts a list of work requests to the send queue of - * the specified QP. - * @qp: The QP to post the work request on. - * @send_wr: A list of work requests to post on the send queue. - * @bad_send_wr: On an immediate failure, this parameter will reference - * the work request that failed to be posted on the QP. - */ -static inline int ib_post_send(struct ib_qp *qp, - struct ib_send_wr *send_wr, - struct ib_send_wr **bad_send_wr) -{ - return qp->device->post_send(qp, send_wr, bad_send_wr); -} - -/** - * ib_post_recv - Posts a list of work requests to the receive queue of - * the specified QP. - * @qp: The QP to post the work request on. - * @recv_wr: A list of work requests to post on the receive queue. - * @bad_recv_wr: On an immediate failure, this parameter will reference - * the work request that failed to be posted on the QP. - */ -static inline int ib_post_recv(struct ib_qp *qp, - struct ib_recv_wr *recv_wr, - struct ib_recv_wr **bad_recv_wr) -{ - return qp->device->post_recv(qp, recv_wr, bad_recv_wr); -} - -/** - * ib_create_cq - Creates a CQ on the specified device. - * @device: The device on which to create the CQ. - * @comp_handler: A user-specified callback that is invoked when a - * completion event occurs on the CQ. - * @event_handler: A user-specified callback that is invoked when an - * asynchronous event not associated with a completion occurs on the CQ. - * @cq_context: Context associated with the CQ returned to the user via - * the associated completion and event handlers. - * @cqe: The minimum size of the CQ. - * - * Users can examine the cq structure to determine the actual CQ size. - */ -struct ib_cq *ib_create_cq(struct ib_device *device, - ib_comp_handler comp_handler, - void (*event_handler)(struct ib_event *, void *), - void *cq_context, int cqe); - -/** - * ib_resize_cq - Modifies the capacity of the CQ. - * @cq: The CQ to resize. - * @cqe: The minimum size of the CQ. - * - * Users can examine the cq structure to determine the actual CQ size. - */ -int ib_resize_cq(struct ib_cq *cq, int cqe); - -/** - * ib_destroy_cq - Destroys the specified CQ. - * @cq: The CQ to destroy. - */ -int ib_destroy_cq(struct ib_cq *cq); - -/** - * ib_poll_cq - poll a CQ for completion(s) - * @cq:the CQ being polled - * @num_entries:maximum number of completions to return - * @wc:array of at least @num_entries &struct ib_wc where completions - * will be returned - * - * Poll a CQ for (possibly multiple) completions. If the return value - * is < 0, an error occurred. If the return value is >= 0, it is the - * number of completions returned. If the return value is - * non-negative and < num_entries, then the CQ was emptied. - */ -static inline int ib_poll_cq(struct ib_cq *cq, int num_entries, - struct ib_wc *wc) -{ - return cq->device->poll_cq(cq, num_entries, wc); -} - -/** - * ib_peek_cq - Returns the number of unreaped completions currently - * on the specified CQ. - * @cq: The CQ to peek. - * @wc_cnt: A minimum number of unreaped completions to check for. - * - * If the number of unreaped completions is greater than or equal to wc_cnt, - * this function returns wc_cnt, otherwise, it returns the actual number of - * unreaped completions. - */ -int ib_peek_cq(struct ib_cq *cq, int wc_cnt); - -/** - * ib_req_notify_cq - Request completion notification on a CQ. - * @cq: The CQ to generate an event for. - * @cq_notify: If set to %IB_CQ_SOLICITED, completion notification will - * occur on the next solicited event. If set to %IB_CQ_NEXT_COMP, - * notification will occur on the next completion. - */ -static inline int ib_req_notify_cq(struct ib_cq *cq, - enum ib_cq_notify cq_notify) -{ - return cq->device->req_notify_cq(cq, cq_notify); -} - -/** - * ib_req_ncomp_notif - Request completion notification when there are - * at least the specified number of unreaped completions on the CQ. - * @cq: The CQ to generate an event for. - * @wc_cnt: The number of unreaped completions that should be on the - * CQ before an event is generated. - */ -static inline int ib_req_ncomp_notif(struct ib_cq *cq, int wc_cnt) -{ - return cq->device->req_ncomp_notif ? - cq->device->req_ncomp_notif(cq, wc_cnt) : - -ENOSYS; -} - -/** - * ib_get_dma_mr - Returns a memory region for system memory that is - * usable for DMA. - * @pd: The protection domain associated with the memory region. - * @mr_access_flags: Specifies the memory access rights. - */ -struct ib_mr *ib_get_dma_mr(struct ib_pd *pd, int mr_access_flags); - -/** - * ib_reg_phys_mr - Prepares a virtually addressed memory region for use - * by an HCA. - * @pd: The protection domain associated assigned to the registered region. - * @phys_buf_array: Specifies a list of physical buffers to use in the - * memory region. - * @num_phys_buf: Specifies the size of the phys_buf_array. - * @mr_access_flags: Specifies the memory access rights. - * @iova_start: The offset of the region's starting I/O virtual address. - */ -struct ib_mr *ib_reg_phys_mr(struct ib_pd *pd, - struct ib_phys_buf *phys_buf_array, - int num_phys_buf, - int mr_access_flags, - u64 *iova_start); - -/** - * ib_rereg_phys_mr - Modifies the attributes of an existing memory region. - * Conceptually, this call performs the functions deregister memory region - * followed by register physical memory region. Where possible, - * resources are reused instead of deallocated and reallocated. - * @mr: The memory region to modify. - * @mr_rereg_mask: A bit-mask used to indicate which of the following - * properties of the memory region are being modified. - * @pd: If %IB_MR_REREG_PD is set in mr_rereg_mask, this field specifies - * the new protection domain to associated with the memory region, - * otherwise, this parameter is ignored. - * @phys_buf_array: If %IB_MR_REREG_TRANS is set in mr_rereg_mask, this - * field specifies a list of physical buffers to use in the new - * translation, otherwise, this parameter is ignored. - * @num_phys_buf: If %IB_MR_REREG_TRANS is set in mr_rereg_mask, this - * field specifies the size of the phys_buf_array, otherwise, this - * parameter is ignored. - * @mr_access_flags: If %IB_MR_REREG_ACCESS is set in mr_rereg_mask, this - * field specifies the new memory access rights, otherwise, this - * parameter is ignored. - * @iova_start: The offset of the region's starting I/O virtual address. - */ -int ib_rereg_phys_mr(struct ib_mr *mr, - int mr_rereg_mask, - struct ib_pd *pd, - struct ib_phys_buf *phys_buf_array, - int num_phys_buf, - int mr_access_flags, - u64 *iova_start); - -/** - * ib_query_mr - Retrieves information about a specific memory region. - * @mr: The memory region to retrieve information about. - * @mr_attr: The attributes of the specified memory region. - */ -int ib_query_mr(struct ib_mr *mr, struct ib_mr_attr *mr_attr); - -/** - * ib_dereg_mr - Deregisters a memory region and removes it from the - * HCA translation table. - * @mr: The memory region to deregister. - */ -int ib_dereg_mr(struct ib_mr *mr); - -/** - * ib_alloc_mw - Allocates a memory window. - * @pd: The protection domain associated with the memory window. - */ -struct ib_mw *ib_alloc_mw(struct ib_pd *pd); - -/** - * ib_bind_mw - Posts a work request to the send queue of the specified - * QP, which binds the memory window to the given address range and - * remote access attributes. - * @qp: QP to post the bind work request on. - * @mw: The memory window to bind. - * @mw_bind: Specifies information about the memory window, including - * its address range, remote access rights, and associated memory region. - */ -static inline int ib_bind_mw(struct ib_qp *qp, - struct ib_mw *mw, - struct ib_mw_bind *mw_bind) -{ - /* XXX reference counting in corresponding MR? */ - return mw->device->bind_mw ? - mw->device->bind_mw(qp, mw, mw_bind) : - -ENOSYS; -} - -/** - * ib_dealloc_mw - Deallocates a memory window. - * @mw: The memory window to deallocate. - */ -int ib_dealloc_mw(struct ib_mw *mw); - -/** - * ib_alloc_fmr - Allocates a unmapped fast memory region. - * @pd: The protection domain associated with the unmapped region. - * @mr_access_flags: Specifies the memory access rights. - * @fmr_attr: Attributes of the unmapped region. - * - * A fast memory region must be mapped before it can be used as part of - * a work request. - */ -struct ib_fmr *ib_alloc_fmr(struct ib_pd *pd, - int mr_access_flags, - struct ib_fmr_attr *fmr_attr); - -/** - * ib_map_phys_fmr - Maps a list of physical pages to a fast memory region. - * @fmr: The fast memory region to associate with the pages. - * @page_list: An array of physical pages to map to the fast memory region. - * @list_len: The number of pages in page_list. - * @iova: The I/O virtual address to use with the mapped region. - */ -static inline int ib_map_phys_fmr(struct ib_fmr *fmr, - u64 *page_list, int list_len, - u64 iova) -{ - return fmr->device->map_phys_fmr(fmr, page_list, list_len, iova); -} - -/** - * ib_unmap_fmr - Removes the mapping from a list of fast memory regions. - * @fmr_list: A linked list of fast memory regions to unmap. - */ -int ib_unmap_fmr(struct list_head *fmr_list); - -/** - * ib_dealloc_fmr - Deallocates a fast memory region. - * @fmr: The fast memory region to deallocate. - */ -int ib_dealloc_fmr(struct ib_fmr *fmr); - -/** - * ib_attach_mcast - Attaches the specified QP to a multicast group. - * @qp: QP to attach to the multicast group. The QP must be type - * IB_QPT_UD. - * @gid: Multicast group GID. - * @lid: Multicast group LID in host byte order. - * - * In order to send and receive multicast packets, subnet - * administration must have created the multicast group and configured - * the fabric appropriately. The port associated with the specified - * QP must also be a member of the multicast group. - */ -int ib_attach_mcast(struct ib_qp *qp, union ib_gid *gid, u16 lid); - -/** - * ib_detach_mcast - Detaches the specified QP from a multicast group. - * @qp: QP to detach from the multicast group. - * @gid: Multicast group GID. - * @lid: Multicast group LID in host byte order. - */ -int ib_detach_mcast(struct ib_qp *qp, union ib_gid *gid, u16 lid); - -#endif /* IB_VERBS_H */ diff --git a/drivers/infiniband/ulp/ipoib/Makefile b/drivers/infiniband/ulp/ipoib/Makefile index 394bc08abc6f..8935e74ae3f8 100644 --- a/drivers/infiniband/ulp/ipoib/Makefile +++ b/drivers/infiniband/ulp/ipoib/Makefile @@ -1,5 +1,3 @@ -EXTRA_CFLAGS += -Idrivers/infiniband/include - obj-$(CONFIG_INFINIBAND_IPOIB) += ib_ipoib.o ib_ipoib-y := ipoib_main.o \ diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index e23041c7be8f..bea960b8191f 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -51,9 +51,9 @@ #include #include -#include -#include -#include +#include +#include +#include /* constants */ diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index cb4f8062677c..ef0e3894863c 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -38,7 +38,7 @@ #include #include -#include +#include #include "ipoib.h" diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c index 21b58aa76fee..79f59d0563ed 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c @@ -33,7 +33,7 @@ * $Id: ipoib_verbs.c 1349 2004-12-16 21:09:43Z roland $ */ -#include +#include #include "ipoib.h" -- cgit v1.2.1 From d18d36b4edbb980c9de7fe00724c3ded5de1b7a7 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 27 Aug 2005 04:13:52 -0400 Subject: libata: fix a few alan-isms --- drivers/scsi/sata_qstor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 2926846cdd6a..93fd06fb4f15 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -198,7 +198,7 @@ static int qs_check_atapi_dma(struct ata_queued_cmd *qc) return 1; /* ATAPI DMA not supported */ } -static void qs_bmdma_stop(struct ata_queud_cmd *qc) +static void qs_bmdma_stop(struct ata_queued_cmd *qc) { /* nothing */ } -- cgit v1.2.1 From 135932651fd1eeb95eb6c5d4f6652aae73fe2c24 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 27 Aug 2005 04:20:12 -0400 Subject: [libata scsi] fix read/write translation edge cases Fix bugs for unlikely edge cases noticed by Douglas Gilbert: - When READ(6)/WRITE(6) sector count == 0, treat it as 256 sectors - For other READ(x)/WRITE(x), when sector count == 0, error. We don't support successfully completing zero-length transfers at this time. --- drivers/scsi/libata-scsi.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index f58311b8c050..4074e7877ba3 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -630,11 +630,19 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->lbah = scsicmd[3]; VPRINTK("ten-byte command\n"); + if (qc->nsect == 0) /* we don't support length==0 cmds */ + return 1; return 0; } if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) { qc->nsect = tf->nsect = scsicmd[4]; + if (!qc->nsect) { + qc->nsect = 256; + if (lba48) + tf->hob_nsect = 1; + } + tf->lbal = scsicmd[3]; tf->lbam = scsicmd[2]; tf->lbah = scsicmd[1] & 0x1f; /* mask out reserved bits */ @@ -674,6 +682,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->lbah = scsicmd[7]; VPRINTK("sixteen-byte command\n"); + if (qc->nsect == 0) /* we don't support length==0 cmds */ + return 1; return 0; } -- cgit v1.2.1 From 84a2ea1c2cee0288f96e0c6aa4f975d4d26508c7 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 25 Aug 2005 19:38:30 +0100 Subject: [PATCH] 6pack Timer initialization I dropped the timer initialization bits by accident when sending the p-persistence fix. This patch gets the driver to work again on halfduplex links. Signed-off-by: Ralf Baechle DL5RB Signed-off-by: Jeff Garzik --- drivers/net/hamradio/6pack.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index f9e3be96963c..b59c65b9645b 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -668,6 +668,9 @@ static int sixpack_open(struct tty_struct *tty) netif_start_queue(dev); init_timer(&sp->tx_t); + sp->tx_t.function = sp_xmit_on_air; + sp->tx_t.data = (unsigned long) sp; + init_timer(&sp->resync_t); spin_unlock_bh(&sp->lock); -- cgit v1.2.1 From 214838a2108b4b1e18abce2e28d37996e9bf7c68 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 24 Aug 2005 18:01:33 +0100 Subject: [PATCH] Fix 6pack setting of MAC address Don't check type of sax25_family; dev_set_mac_address has already done that before and anyway, the type to check against would have been ARPHRD_AX25. We only got away because AF_AX25 and ARPHRD_AX25 both happen to be defined to the same value. Don't check sax25_ndigis either; it's value is insignificant for the purpose of setting the MAC address and the check has shown to break some application software for no good reason. Signed-off-by: Ralf Baechle DL5RB Signed-off-by: Jeff Garzik --- drivers/net/hamradio/6pack.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index b59c65b9645b..0b230222bfea 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -308,12 +308,6 @@ static int sp_set_mac_address(struct net_device *dev, void *addr) { struct sockaddr_ax25 *sa = addr; - if (sa->sax25_family != AF_AX25) - return -EINVAL; - - if (!sa->sax25_ndigis) - return -EINVAL; - spin_lock_irq(&dev->xmit_lock); memcpy(dev->dev_addr, &sa->sax25_call, AX25_ADDR_LEN); spin_unlock_irq(&dev->xmit_lock); -- cgit v1.2.1 From 815f62bf742718458ba822a7e1f51f285eb997f2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 24 Aug 2005 18:06:36 +0100 Subject: [PATCH] SMP rewrite of mkiss Rewrite the mkiss driver to make it SMP-proof following the example of 6pack.c. Signed-off-by: Ralf Baechle DL5RB Signed-off-by: Jeff Garzik --- drivers/net/hamradio/Kconfig | 2 +- drivers/net/hamradio/mkiss.c | 1083 ++++++++++++++++++++---------------------- 2 files changed, 523 insertions(+), 562 deletions(-) (limited to 'drivers') diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig index 0cd54306e636..de087cd609d9 100644 --- a/drivers/net/hamradio/Kconfig +++ b/drivers/net/hamradio/Kconfig @@ -1,6 +1,6 @@ config MKISS tristate "Serial port KISS driver" - depends on AX25 && BROKEN_ON_SMP + depends on AX25 ---help--- KISS is a protocol used for the exchange of data between a computer and a Terminal Node Controller (a small embedded system commonly diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index e94952e799fe..63b1a2b86acb 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -1,30 +1,19 @@ /* - * MKISS Driver + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. * - * This module: - * This module is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. * - * This module implements the AX.25 protocol for kernel-based - * devices like TTYs. It interfaces between a raw TTY, and the - * kernel's AX.25 protocol layers, just like slip.c. - * AX.25 needs to be separated from slip.c while slip.c is no - * longer a static kernel device since it is a module. - * This method clears the way to implement other kiss protocols - * like mkiss smack g8bpq ..... so far only mkiss is implemented. + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. * - * Hans Alblas - * - * History - * Jonathan (G4KLX) Fixed to match Linux networking changes - 2.1.15. - * Matthias (DG2FEF) Added support for FlexNet CRC (on special request) - * Fixed bug in ax25_close(): dev_lock_wait() was - * called twice, causing a deadlock. - * Jeroen (PE1RXQ) Removed old MKISS_MAGIC stuff and calls to - * MOD_*_USE_COUNT - * Remove cli() and fix rtnl lock usage. + * Copyright (C) Hans Alblas PE1AYX + * Copyright (C) 2004, 05 Ralf Baechle DL5RB */ #include @@ -50,174 +39,296 @@ #include -#include "mkiss.h" - #ifdef CONFIG_INET #include #include #endif -static char banner[] __initdata = KERN_INFO "mkiss: AX.25 Multikiss, Hans Albas PE1AYX\n"; - -typedef struct ax25_ctrl { - struct ax_disp ctrl; /* */ - struct net_device dev; /* the device */ -} ax25_ctrl_t; - -static ax25_ctrl_t **ax25_ctrls; - -int ax25_maxdev = AX25_MAXDEV; /* Can be overridden with insmod! */ - -static struct tty_ldisc ax_ldisc; - -static int ax25_init(struct net_device *); -static int kiss_esc(unsigned char *, unsigned char *, int); -static int kiss_esc_crc(unsigned char *, unsigned char *, unsigned short, int); -static void kiss_unesc(struct ax_disp *, unsigned char); +#define AX_MTU 236 + +/* SLIP/KISS protocol characters. */ +#define END 0300 /* indicates end of frame */ +#define ESC 0333 /* indicates byte stuffing */ +#define ESC_END 0334 /* ESC ESC_END means END 'data' */ +#define ESC_ESC 0335 /* ESC ESC_ESC means ESC 'data' */ + +struct mkiss { + struct tty_struct *tty; /* ptr to TTY structure */ + struct net_device *dev; /* easy for intr handling */ + + /* These are pointers to the malloc()ed frame buffers. */ + spinlock_t buflock;/* lock for rbuf and xbuf */ + unsigned char *rbuff; /* receiver buffer */ + int rcount; /* received chars counter */ + unsigned char *xbuff; /* transmitter buffer */ + unsigned char *xhead; /* pointer to next byte to XMIT */ + int xleft; /* bytes left in XMIT queue */ + + struct net_device_stats stats; + + /* Detailed SLIP statistics. */ + int mtu; /* Our mtu (to spot changes!) */ + int buffsize; /* Max buffers sizes */ + + unsigned long flags; /* Flag values/ mode etc */ + /* long req'd: used by set_bit --RR */ +#define AXF_INUSE 0 /* Channel in use */ +#define AXF_ESCAPE 1 /* ESC received */ +#define AXF_ERROR 2 /* Parity, etc. error */ +#define AXF_KEEPTEST 3 /* Keepalive test flag */ +#define AXF_OUTWAIT 4 /* is outpacket was flag */ + + int mode; + int crcmode; /* MW: for FlexNet, SMACK etc. */ +#define CRC_MODE_NONE 0 +#define CRC_MODE_FLEX 1 +#define CRC_MODE_SMACK 2 + + atomic_t refcnt; + struct semaphore dead_sem; +}; /*---------------------------------------------------------------------------*/ -static const unsigned short Crc_flex_table[] = { - 0x0f87, 0x1e0e, 0x2c95, 0x3d1c, 0x49a3, 0x582a, 0x6ab1, 0x7b38, - 0x83cf, 0x9246, 0xa0dd, 0xb154, 0xc5eb, 0xd462, 0xe6f9, 0xf770, - 0x1f06, 0x0e8f, 0x3c14, 0x2d9d, 0x5922, 0x48ab, 0x7a30, 0x6bb9, - 0x934e, 0x82c7, 0xb05c, 0xa1d5, 0xd56a, 0xc4e3, 0xf678, 0xe7f1, - 0x2e85, 0x3f0c, 0x0d97, 0x1c1e, 0x68a1, 0x7928, 0x4bb3, 0x5a3a, - 0xa2cd, 0xb344, 0x81df, 0x9056, 0xe4e9, 0xf560, 0xc7fb, 0xd672, - 0x3e04, 0x2f8d, 0x1d16, 0x0c9f, 0x7820, 0x69a9, 0x5b32, 0x4abb, - 0xb24c, 0xa3c5, 0x915e, 0x80d7, 0xf468, 0xe5e1, 0xd77a, 0xc6f3, - 0x4d83, 0x5c0a, 0x6e91, 0x7f18, 0x0ba7, 0x1a2e, 0x28b5, 0x393c, - 0xc1cb, 0xd042, 0xe2d9, 0xf350, 0x87ef, 0x9666, 0xa4fd, 0xb574, - 0x5d02, 0x4c8b, 0x7e10, 0x6f99, 0x1b26, 0x0aaf, 0x3834, 0x29bd, - 0xd14a, 0xc0c3, 0xf258, 0xe3d1, 0x976e, 0x86e7, 0xb47c, 0xa5f5, - 0x6c81, 0x7d08, 0x4f93, 0x5e1a, 0x2aa5, 0x3b2c, 0x09b7, 0x183e, - 0xe0c9, 0xf140, 0xc3db, 0xd252, 0xa6ed, 0xb764, 0x85ff, 0x9476, - 0x7c00, 0x6d89, 0x5f12, 0x4e9b, 0x3a24, 0x2bad, 0x1936, 0x08bf, - 0xf048, 0xe1c1, 0xd35a, 0xc2d3, 0xb66c, 0xa7e5, 0x957e, 0x84f7, - 0x8b8f, 0x9a06, 0xa89d, 0xb914, 0xcdab, 0xdc22, 0xeeb9, 0xff30, - 0x07c7, 0x164e, 0x24d5, 0x355c, 0x41e3, 0x506a, 0x62f1, 0x7378, - 0x9b0e, 0x8a87, 0xb81c, 0xa995, 0xdd2a, 0xcca3, 0xfe38, 0xefb1, - 0x1746, 0x06cf, 0x3454, 0x25dd, 0x5162, 0x40eb, 0x7270, 0x63f9, - 0xaa8d, 0xbb04, 0x899f, 0x9816, 0xeca9, 0xfd20, 0xcfbb, 0xde32, - 0x26c5, 0x374c, 0x05d7, 0x145e, 0x60e1, 0x7168, 0x43f3, 0x527a, - 0xba0c, 0xab85, 0x991e, 0x8897, 0xfc28, 0xeda1, 0xdf3a, 0xceb3, - 0x3644, 0x27cd, 0x1556, 0x04df, 0x7060, 0x61e9, 0x5372, 0x42fb, - 0xc98b, 0xd802, 0xea99, 0xfb10, 0x8faf, 0x9e26, 0xacbd, 0xbd34, - 0x45c3, 0x544a, 0x66d1, 0x7758, 0x03e7, 0x126e, 0x20f5, 0x317c, - 0xd90a, 0xc883, 0xfa18, 0xeb91, 0x9f2e, 0x8ea7, 0xbc3c, 0xadb5, - 0x5542, 0x44cb, 0x7650, 0x67d9, 0x1366, 0x02ef, 0x3074, 0x21fd, - 0xe889, 0xf900, 0xcb9b, 0xda12, 0xaead, 0xbf24, 0x8dbf, 0x9c36, - 0x64c1, 0x7548, 0x47d3, 0x565a, 0x22e5, 0x336c, 0x01f7, 0x107e, - 0xf808, 0xe981, 0xdb1a, 0xca93, 0xbe2c, 0xafa5, 0x9d3e, 0x8cb7, - 0x7440, 0x65c9, 0x5752, 0x46db, 0x3264, 0x23ed, 0x1176, 0x00ff +static const unsigned short crc_flex_table[] = { + 0x0f87, 0x1e0e, 0x2c95, 0x3d1c, 0x49a3, 0x582a, 0x6ab1, 0x7b38, + 0x83cf, 0x9246, 0xa0dd, 0xb154, 0xc5eb, 0xd462, 0xe6f9, 0xf770, + 0x1f06, 0x0e8f, 0x3c14, 0x2d9d, 0x5922, 0x48ab, 0x7a30, 0x6bb9, + 0x934e, 0x82c7, 0xb05c, 0xa1d5, 0xd56a, 0xc4e3, 0xf678, 0xe7f1, + 0x2e85, 0x3f0c, 0x0d97, 0x1c1e, 0x68a1, 0x7928, 0x4bb3, 0x5a3a, + 0xa2cd, 0xb344, 0x81df, 0x9056, 0xe4e9, 0xf560, 0xc7fb, 0xd672, + 0x3e04, 0x2f8d, 0x1d16, 0x0c9f, 0x7820, 0x69a9, 0x5b32, 0x4abb, + 0xb24c, 0xa3c5, 0x915e, 0x80d7, 0xf468, 0xe5e1, 0xd77a, 0xc6f3, + 0x4d83, 0x5c0a, 0x6e91, 0x7f18, 0x0ba7, 0x1a2e, 0x28b5, 0x393c, + 0xc1cb, 0xd042, 0xe2d9, 0xf350, 0x87ef, 0x9666, 0xa4fd, 0xb574, + 0x5d02, 0x4c8b, 0x7e10, 0x6f99, 0x1b26, 0x0aaf, 0x3834, 0x29bd, + 0xd14a, 0xc0c3, 0xf258, 0xe3d1, 0x976e, 0x86e7, 0xb47c, 0xa5f5, + 0x6c81, 0x7d08, 0x4f93, 0x5e1a, 0x2aa5, 0x3b2c, 0x09b7, 0x183e, + 0xe0c9, 0xf140, 0xc3db, 0xd252, 0xa6ed, 0xb764, 0x85ff, 0x9476, + 0x7c00, 0x6d89, 0x5f12, 0x4e9b, 0x3a24, 0x2bad, 0x1936, 0x08bf, + 0xf048, 0xe1c1, 0xd35a, 0xc2d3, 0xb66c, 0xa7e5, 0x957e, 0x84f7, + 0x8b8f, 0x9a06, 0xa89d, 0xb914, 0xcdab, 0xdc22, 0xeeb9, 0xff30, + 0x07c7, 0x164e, 0x24d5, 0x355c, 0x41e3, 0x506a, 0x62f1, 0x7378, + 0x9b0e, 0x8a87, 0xb81c, 0xa995, 0xdd2a, 0xcca3, 0xfe38, 0xefb1, + 0x1746, 0x06cf, 0x3454, 0x25dd, 0x5162, 0x40eb, 0x7270, 0x63f9, + 0xaa8d, 0xbb04, 0x899f, 0x9816, 0xeca9, 0xfd20, 0xcfbb, 0xde32, + 0x26c5, 0x374c, 0x05d7, 0x145e, 0x60e1, 0x7168, 0x43f3, 0x527a, + 0xba0c, 0xab85, 0x991e, 0x8897, 0xfc28, 0xeda1, 0xdf3a, 0xceb3, + 0x3644, 0x27cd, 0x1556, 0x04df, 0x7060, 0x61e9, 0x5372, 0x42fb, + 0xc98b, 0xd802, 0xea99, 0xfb10, 0x8faf, 0x9e26, 0xacbd, 0xbd34, + 0x45c3, 0x544a, 0x66d1, 0x7758, 0x03e7, 0x126e, 0x20f5, 0x317c, + 0xd90a, 0xc883, 0xfa18, 0xeb91, 0x9f2e, 0x8ea7, 0xbc3c, 0xadb5, + 0x5542, 0x44cb, 0x7650, 0x67d9, 0x1366, 0x02ef, 0x3074, 0x21fd, + 0xe889, 0xf900, 0xcb9b, 0xda12, 0xaead, 0xbf24, 0x8dbf, 0x9c36, + 0x64c1, 0x7548, 0x47d3, 0x565a, 0x22e5, 0x336c, 0x01f7, 0x107e, + 0xf808, 0xe981, 0xdb1a, 0xca93, 0xbe2c, 0xafa5, 0x9d3e, 0x8cb7, + 0x7440, 0x65c9, 0x5752, 0x46db, 0x3264, 0x23ed, 0x1176, 0x00ff }; -/*---------------------------------------------------------------------------*/ - static unsigned short calc_crc_flex(unsigned char *cp, int size) { - unsigned short crc = 0xffff; - - while (size--) - crc = (crc << 8) ^ Crc_flex_table[((crc >> 8) ^ *cp++) & 0xff]; + unsigned short crc = 0xffff; - return crc; -} + while (size--) + crc = (crc << 8) ^ crc_flex_table[((crc >> 8) ^ *cp++) & 0xff]; -/*---------------------------------------------------------------------------*/ + return crc; +} static int check_crc_flex(unsigned char *cp, int size) { - unsigned short crc = 0xffff; + unsigned short crc = 0xffff; - if (size < 3) - return -1; + if (size < 3) + return -1; - while (size--) - crc = (crc << 8) ^ Crc_flex_table[((crc >> 8) ^ *cp++) & 0xff]; + while (size--) + crc = (crc << 8) ^ crc_flex_table[((crc >> 8) ^ *cp++) & 0xff]; - if ((crc & 0xffff) != 0x7070) - return -1; + if ((crc & 0xffff) != 0x7070) + return -1; - return 0; + return 0; } -/*---------------------------------------------------------------------------*/ +/* + * Standard encapsulation + */ -/* Find a free channel, and link in this `tty' line. */ -static inline struct ax_disp *ax_alloc(void) +static int kiss_esc(unsigned char *s, unsigned char *d, int len) { - ax25_ctrl_t *axp=NULL; - int i; + unsigned char *ptr = d; + unsigned char c; - for (i = 0; i < ax25_maxdev; i++) { - axp = ax25_ctrls[i]; + /* + * Send an initial END character to flush out any data that may have + * accumulated in the receiver due to line noise. + */ - /* Not allocated ? */ - if (axp == NULL) - break; + *ptr++ = END; - /* Not in use ? */ - if (!test_and_set_bit(AXF_INUSE, &axp->ctrl.flags)) + while (len-- > 0) { + switch (c = *s++) { + case END: + *ptr++ = ESC; + *ptr++ = ESC_END; break; + case ESC: + *ptr++ = ESC; + *ptr++ = ESC_ESC; + break; + default: + *ptr++ = c; + break; + } } - /* Sorry, too many, all slots in use */ - if (i >= ax25_maxdev) - return NULL; + *ptr++ = END; + + return ptr - d; +} + +/* + * MW: + * OK its ugly, but tell me a better solution without copying the + * packet to a temporary buffer :-) + */ +static int kiss_esc_crc(unsigned char *s, unsigned char *d, unsigned short crc, + int len) +{ + unsigned char *ptr = d; + unsigned char c=0; + + *ptr++ = END; + while (len > 0) { + if (len > 2) + c = *s++; + else if (len > 1) + c = crc >> 8; + else if (len > 0) + c = crc & 0xff; + + len--; - /* If no channels are available, allocate one */ - if (axp == NULL && (ax25_ctrls[i] = kmalloc(sizeof(ax25_ctrl_t), GFP_KERNEL)) != NULL) { - axp = ax25_ctrls[i]; + switch (c) { + case END: + *ptr++ = ESC; + *ptr++ = ESC_END; + break; + case ESC: + *ptr++ = ESC; + *ptr++ = ESC_ESC; + break; + default: + *ptr++ = c; + break; + } } - memset(axp, 0, sizeof(ax25_ctrl_t)); - - /* Initialize channel control data */ - set_bit(AXF_INUSE, &axp->ctrl.flags); - sprintf(axp->dev.name, "ax%d", i++); - axp->ctrl.tty = NULL; - axp->dev.base_addr = i; - axp->dev.priv = (void *)&axp->ctrl; - axp->dev.next = NULL; - axp->dev.init = ax25_init; - - if (axp != NULL) { - /* - * register device so that it can be ifconfig'ed - * ax25_init() will be called as a side-effect - * SIDE-EFFECT WARNING: ax25_init() CLEARS axp->ctrl ! - */ - if (register_netdev(&axp->dev) == 0) { - /* (Re-)Set the INUSE bit. Very Important! */ - set_bit(AXF_INUSE, &axp->ctrl.flags); - axp->ctrl.dev = &axp->dev; - axp->dev.priv = (void *) &axp->ctrl; - - return &axp->ctrl; - } else { - clear_bit(AXF_INUSE,&axp->ctrl.flags); - printk(KERN_ERR "mkiss: ax_alloc() - register_netdev() failure.\n"); + *ptr++ = END; + + return ptr - d; +} + +/* Send one completely decapsulated AX.25 packet to the AX.25 layer. */ +static void ax_bump(struct mkiss *ax) +{ + struct sk_buff *skb; + int count; + + spin_lock_bh(&ax->buflock); + if (ax->rbuff[0] > 0x0f) { + if (ax->rbuff[0] & 0x20) { + ax->crcmode = CRC_MODE_FLEX; + if (check_crc_flex(ax->rbuff, ax->rcount) < 0) { + ax->stats.rx_errors++; + return; + } + ax->rcount -= 2; + /* dl9sau bugfix: the trailling two bytes flexnet crc + * will not be passed to the kernel. thus we have + * to correct the kissparm signature, because it + * indicates a crc but there's none + */ + *ax->rbuff &= ~0x20; } + } + spin_unlock_bh(&ax->buflock); + + count = ax->rcount; + + if ((skb = dev_alloc_skb(count)) == NULL) { + printk(KERN_ERR "mkiss: %s: memory squeeze, dropping packet.\n", + ax->dev->name); + ax->stats.rx_dropped++; + return; } - return NULL; + spin_lock_bh(&ax->buflock); + memcpy(skb_put(skb,count), ax->rbuff, count); + spin_unlock_bh(&ax->buflock); + skb->protocol = ax25_type_trans(skb, ax->dev); + netif_rx(skb); + ax->dev->last_rx = jiffies; + ax->stats.rx_packets++; + ax->stats.rx_bytes += count; } -/* Free an AX25 channel. */ -static inline void ax_free(struct ax_disp *ax) +static void kiss_unesc(struct mkiss *ax, unsigned char s) { - /* Free all AX25 frame buffers. */ - if (ax->rbuff) - kfree(ax->rbuff); - ax->rbuff = NULL; - if (ax->xbuff) - kfree(ax->xbuff); - ax->xbuff = NULL; - if (!test_and_clear_bit(AXF_INUSE, &ax->flags)) - printk(KERN_ERR "mkiss: %s: ax_free for already free unit.\n", ax->dev->name); + switch (s) { + case END: + /* drop keeptest bit = VSV */ + if (test_bit(AXF_KEEPTEST, &ax->flags)) + clear_bit(AXF_KEEPTEST, &ax->flags); + + if (!test_and_clear_bit(AXF_ERROR, &ax->flags) && (ax->rcount > 2)) + ax_bump(ax); + + clear_bit(AXF_ESCAPE, &ax->flags); + ax->rcount = 0; + return; + + case ESC: + set_bit(AXF_ESCAPE, &ax->flags); + return; + case ESC_ESC: + if (test_and_clear_bit(AXF_ESCAPE, &ax->flags)) + s = ESC; + break; + case ESC_END: + if (test_and_clear_bit(AXF_ESCAPE, &ax->flags)) + s = END; + break; + } + + spin_lock_bh(&ax->buflock); + if (!test_bit(AXF_ERROR, &ax->flags)) { + if (ax->rcount < ax->buffsize) { + ax->rbuff[ax->rcount++] = s; + spin_unlock_bh(&ax->buflock); + return; + } + + ax->stats.rx_over_errors++; + set_bit(AXF_ERROR, &ax->flags); + } + spin_unlock_bh(&ax->buflock); +} + +static int ax_set_mac_address(struct net_device *dev, void *addr) +{ + struct sockaddr_ax25 *sa = addr; + + spin_lock_irq(&dev->xmit_lock); + memcpy(dev->dev_addr, &sa->sax25_call, AX25_ADDR_LEN); + spin_unlock_irq(&dev->xmit_lock); + + return 0; } -static void ax_changedmtu(struct ax_disp *ax) +/*---------------------------------------------------------------------------*/ + +static void ax_changedmtu(struct mkiss *ax) { struct net_device *dev = ax->dev; unsigned char *xbuff, *rbuff, *oxbuff, *orbuff; @@ -237,7 +348,8 @@ static void ax_changedmtu(struct ax_disp *ax) rbuff = kmalloc(len + 4, GFP_ATOMIC); if (xbuff == NULL || rbuff == NULL) { - printk(KERN_ERR "mkiss: %s: unable to grow ax25 buffers, MTU change cancelled.\n", + printk(KERN_ERR "mkiss: %s: unable to grow ax25 buffers, " + "MTU change cancelled.\n", ax->dev->name); dev->mtu = ax->mtu; if (xbuff != NULL) @@ -259,7 +371,7 @@ static void ax_changedmtu(struct ax_disp *ax) memcpy(ax->xbuff, ax->xhead, ax->xleft); } else { ax->xleft = 0; - ax->tx_dropped++; + ax->stats.tx_dropped++; } } @@ -270,7 +382,7 @@ static void ax_changedmtu(struct ax_disp *ax) memcpy(ax->rbuff, orbuff, ax->rcount); } else { ax->rcount = 0; - ax->rx_over_errors++; + ax->stats.rx_over_errors++; set_bit(AXF_ERROR, &ax->flags); } } @@ -280,72 +392,14 @@ static void ax_changedmtu(struct ax_disp *ax) spin_unlock_bh(&ax->buflock); - if (oxbuff != NULL) - kfree(oxbuff); - if (orbuff != NULL) - kfree(orbuff); -} - - -/* Set the "sending" flag. This must be atomic. */ -static inline void ax_lock(struct ax_disp *ax) -{ - netif_stop_queue(ax->dev); -} - - -/* Clear the "sending" flag. This must be atomic. */ -static inline void ax_unlock(struct ax_disp *ax) -{ - netif_start_queue(ax->dev); -} - -/* Send one completely decapsulated AX.25 packet to the AX.25 layer. */ -static void ax_bump(struct ax_disp *ax) -{ - struct sk_buff *skb; - int count; - - spin_lock_bh(&ax->buflock); - if (ax->rbuff[0] > 0x0f) { - if (ax->rbuff[0] & 0x20) { - ax->crcmode = CRC_MODE_FLEX; - if (check_crc_flex(ax->rbuff, ax->rcount) < 0) { - ax->rx_errors++; - return; - } - ax->rcount -= 2; - /* dl9sau bugfix: the trailling two bytes flexnet crc - * will not be passed to the kernel. thus we have - * to correct the kissparm signature, because it - * indicates a crc but there's none - */ - *ax->rbuff &= ~0x20; - } - } - spin_unlock_bh(&ax->buflock); - - count = ax->rcount; - - if ((skb = dev_alloc_skb(count)) == NULL) { - printk(KERN_ERR "mkiss: %s: memory squeeze, dropping packet.\n", ax->dev->name); - ax->rx_dropped++; - return; - } - - spin_lock_bh(&ax->buflock); - memcpy(skb_put(skb,count), ax->rbuff, count); - spin_unlock_bh(&ax->buflock); - skb->protocol = ax25_type_trans(skb, ax->dev); - netif_rx(skb); - ax->dev->last_rx = jiffies; - ax->rx_packets++; - ax->rx_bytes+=count; + kfree(oxbuff); + kfree(orbuff); } /* Encapsulate one AX.25 packet and stuff into a TTY queue. */ -static void ax_encaps(struct ax_disp *ax, unsigned char *icp, int len) +static void ax_encaps(struct net_device *dev, unsigned char *icp, int len) { + struct mkiss *ax = netdev_priv(dev); unsigned char *p; int actual, count; @@ -355,8 +409,8 @@ static void ax_encaps(struct ax_disp *ax, unsigned char *icp, int len) if (len > ax->mtu) { /* Sigh, shouldn't occur BUT ... */ len = ax->mtu; printk(KERN_ERR "mkiss: %s: truncating oversized transmit packet!\n", ax->dev->name); - ax->tx_dropped++; - ax_unlock(ax); + ax->stats.tx_dropped++; + netif_start_queue(dev); return; } @@ -377,10 +431,11 @@ static void ax_encaps(struct ax_disp *ax, unsigned char *icp, int len) break; } - ax->tty->flags |= (1 << TTY_DO_WRITE_WAKEUP); + set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); actual = ax->tty->driver->write(ax->tty, ax->xbuff, count); - ax->tx_packets++; - ax->tx_bytes+=actual; + ax->stats.tx_packets++; + ax->stats.tx_bytes += actual; + ax->dev->trans_start = jiffies; ax->xleft = count - actual; ax->xhead = ax->xbuff + actual; @@ -388,37 +443,10 @@ static void ax_encaps(struct ax_disp *ax, unsigned char *icp, int len) spin_unlock_bh(&ax->buflock); } -/* - * Called by the driver when there's room for more data. If we have - * more packets to send, we send them here. - */ -static void ax25_write_wakeup(struct tty_struct *tty) -{ - int actual; - struct ax_disp *ax = (struct ax_disp *) tty->disc_data; - - /* First make sure we're connected. */ - if (ax == NULL || ax->magic != AX25_MAGIC || !netif_running(ax->dev)) - return; - if (ax->xleft <= 0) { - /* Now serial buffer is almost free & we can start - * transmission of another packet - */ - tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP); - - netif_wake_queue(ax->dev); - return; - } - - actual = tty->driver->write(tty, ax->xhead, ax->xleft); - ax->xleft -= actual; - ax->xhead += actual; -} - /* Encapsulate an AX.25 packet and kick it into a TTY queue. */ static int ax_xmit(struct sk_buff *skb, struct net_device *dev) { - struct ax_disp *ax = netdev_priv(dev); + struct mkiss *ax = netdev_priv(dev); if (!netif_running(dev)) { printk(KERN_ERR "mkiss: %s: xmit call when iface is down\n", dev->name); @@ -440,20 +468,30 @@ static int ax_xmit(struct sk_buff *skb, struct net_device *dev) "bad line quality" : "driver error"); ax->xleft = 0; - ax->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP); - ax_unlock(ax); + clear_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); + netif_start_queue(dev); } /* We were not busy, so we are now... :-) */ if (skb != NULL) { - ax_lock(ax); - ax_encaps(ax, skb->data, skb->len); + netif_stop_queue(dev); + ax_encaps(dev, skb->data, skb->len); kfree_skb(skb); } return 0; } +static int ax_open_dev(struct net_device *dev) +{ + struct mkiss *ax = netdev_priv(dev); + + if (ax->tty == NULL) + return -ENODEV; + + return 0; +} + #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE) /* Return the frame type ID */ @@ -482,7 +520,7 @@ static int ax_rebuild_header(struct sk_buff *skb) /* Open the low-level part of the AX25 channel. Easy! */ static int ax_open(struct net_device *dev) { - struct ax_disp *ax = netdev_priv(dev); + struct mkiss *ax = netdev_priv(dev); unsigned long len; if (ax->tty == NULL) @@ -519,7 +557,6 @@ static int ax_open(struct net_device *dev) spin_lock_init(&ax->buflock); - netif_start_queue(dev); return 0; noxbuff: @@ -533,68 +570,100 @@ norbuff: /* Close the low-level part of the AX25 channel. Easy! */ static int ax_close(struct net_device *dev) { - struct ax_disp *ax = netdev_priv(dev); + struct mkiss *ax = netdev_priv(dev); - if (ax->tty == NULL) - return -EBUSY; - - ax->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP); + if (ax->tty) + clear_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); netif_stop_queue(dev); return 0; } -static int ax25_receive_room(struct tty_struct *tty) +static struct net_device_stats *ax_get_stats(struct net_device *dev) { - return 65536; /* We can handle an infinite amount of data. :-) */ + struct mkiss *ax = netdev_priv(dev); + + return &ax->stats; +} + +static void ax_setup(struct net_device *dev) +{ + static char ax25_bcast[AX25_ADDR_LEN] = + {'Q'<<1,'S'<<1,'T'<<1,' '<<1,' '<<1,' '<<1,'0'<<1}; + static char ax25_test[AX25_ADDR_LEN] = + {'L'<<1,'I'<<1,'N'<<1,'U'<<1,'X'<<1,' '<<1,'1'<<1}; + + /* Finish setting up the DEVICE info. */ + dev->mtu = AX_MTU; + dev->hard_start_xmit = ax_xmit; + dev->open = ax_open_dev; + dev->stop = ax_close; + dev->get_stats = ax_get_stats; + dev->set_mac_address = ax_set_mac_address; + dev->hard_header_len = 0; + dev->addr_len = 0; + dev->type = ARPHRD_AX25; + dev->tx_queue_len = 10; + dev->hard_header = ax_header; + dev->rebuild_header = ax_rebuild_header; + + memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN); + memcpy(dev->dev_addr, ax25_test, AX25_ADDR_LEN); + + dev->flags = IFF_BROADCAST | IFF_MULTICAST; } /* - * Handle the 'receiver data ready' interrupt. - * This function is called by the 'tty_io' module in the kernel when - * a block of data has been received, which can now be decapsulated - * and sent on to the AX.25 layer for further processing. + * We have a potential race on dereferencing tty->disc_data, because the tty + * layer provides no locking at all - thus one cpu could be running + * sixpack_receive_buf while another calls sixpack_close, which zeroes + * tty->disc_data and frees the memory that sixpack_receive_buf is using. The + * best way to fix this is to use a rwlock in the tty struct, but for now we + * use a single global rwlock for all ttys in ppp line discipline. */ -static void ax25_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) +static rwlock_t disc_data_lock = RW_LOCK_UNLOCKED; + +static struct mkiss *mkiss_get(struct tty_struct *tty) { - struct ax_disp *ax = (struct ax_disp *) tty->disc_data; + struct mkiss *ax; - if (ax == NULL || ax->magic != AX25_MAGIC || !netif_running(ax->dev)) - return; + read_lock(&disc_data_lock); + ax = tty->disc_data; + if (ax) + atomic_inc(&ax->refcnt); + read_unlock(&disc_data_lock); - /* - * Argh! mtu change time! - costs us the packet part received - * at the change - */ - if (ax->mtu != ax->dev->mtu + 73) - ax_changedmtu(ax); - - /* Read the characters out of the buffer */ - while (count--) { - if (fp != NULL && *fp++) { - if (!test_and_set_bit(AXF_ERROR, &ax->flags)) - ax->rx_errors++; - cp++; - continue; - } + return ax; +} - kiss_unesc(ax, *cp++); - } +static void mkiss_put(struct mkiss *ax) +{ + if (atomic_dec_and_test(&ax->refcnt)) + up(&ax->dead_sem); } -static int ax25_open(struct tty_struct *tty) +static int mkiss_open(struct tty_struct *tty) { - struct ax_disp *ax = (struct ax_disp *) tty->disc_data; + struct net_device *dev; + struct mkiss *ax; int err; - /* First make sure we're not already connected. */ - if (ax && ax->magic == AX25_MAGIC) - return -EEXIST; + if (!capable(CAP_NET_ADMIN)) + return -EPERM; - /* OK. Find a free AX25 channel to use. */ - if ((ax = ax_alloc()) == NULL) - return -ENFILE; + dev = alloc_netdev(sizeof(struct mkiss), "ax%d", ax_setup); + if (!dev) { + err = -ENOMEM; + goto out; + } + + ax = netdev_priv(dev); + ax->dev = dev; + + spin_lock_init(&ax->buflock); + atomic_set(&ax->refcnt, 1); + init_MUTEX_LOCKED(&ax->dead_sem); ax->tty = tty; tty->disc_data = ax; @@ -603,283 +672,212 @@ static int ax25_open(struct tty_struct *tty) tty->driver->flush_buffer(tty); /* Restore default settings */ - ax->dev->type = ARPHRD_AX25; + dev->type = ARPHRD_AX25; /* Perform the low-level AX25 initialization. */ - if ((err = ax_open(ax->dev))) - return err; + if ((err = ax_open(ax->dev))) { + goto out_free_netdev; + } - /* Done. We have linked the TTY line to a channel. */ - return ax->dev->base_addr; -} + if (register_netdev(dev)) + goto out_free_buffers; -static void ax25_close(struct tty_struct *tty) -{ - struct ax_disp *ax = (struct ax_disp *) tty->disc_data; + netif_start_queue(dev); - /* First make sure we're connected. */ - if (ax == NULL || ax->magic != AX25_MAGIC) - return; + /* Done. We have linked the TTY line to a channel. */ + return 0; - unregister_netdev(ax->dev); +out_free_buffers: + kfree(ax->rbuff); + kfree(ax->xbuff); - tty->disc_data = NULL; - ax->tty = NULL; +out_free_netdev: + free_netdev(dev); - ax_free(ax); +out: + return err; } - -static struct net_device_stats *ax_get_stats(struct net_device *dev) +static void mkiss_close(struct tty_struct *tty) { - static struct net_device_stats stats; - struct ax_disp *ax = netdev_priv(dev); - - memset(&stats, 0, sizeof(struct net_device_stats)); - - stats.rx_packets = ax->rx_packets; - stats.tx_packets = ax->tx_packets; - stats.rx_bytes = ax->rx_bytes; - stats.tx_bytes = ax->tx_bytes; - stats.rx_dropped = ax->rx_dropped; - stats.tx_dropped = ax->tx_dropped; - stats.tx_errors = ax->tx_errors; - stats.rx_errors = ax->rx_errors; - stats.rx_over_errors = ax->rx_over_errors; - - return &stats; -} + struct mkiss *ax; + write_lock(&disc_data_lock); + ax = tty->disc_data; + tty->disc_data = NULL; + write_unlock(&disc_data_lock); -/************************************************************************ - * STANDARD ENCAPSULATION * - ************************************************************************/ - -static int kiss_esc(unsigned char *s, unsigned char *d, int len) -{ - unsigned char *ptr = d; - unsigned char c; + if (ax == 0) + return; /* - * Send an initial END character to flush out any - * data that may have accumulated in the receiver - * due to line noise. + * We have now ensured that nobody can start using ap from now on, but + * we have to wait for all existing users to finish. */ + if (!atomic_dec_and_test(&ax->refcnt)) + down(&ax->dead_sem); - *ptr++ = END; - - while (len-- > 0) { - switch (c = *s++) { - case END: - *ptr++ = ESC; - *ptr++ = ESC_END; - break; - case ESC: - *ptr++ = ESC; - *ptr++ = ESC_ESC; - break; - default: - *ptr++ = c; - break; - } - } + unregister_netdev(ax->dev); - *ptr++ = END; + /* Free all AX25 frame buffers. */ + kfree(ax->rbuff); + kfree(ax->xbuff); - return ptr - d; + ax->tty = NULL; } -/* - * MW: - * OK its ugly, but tell me a better solution without copying the - * packet to a temporary buffer :-) - */ -static int kiss_esc_crc(unsigned char *s, unsigned char *d, unsigned short crc, int len) +/* Perform I/O control on an active ax25 channel. */ +static int mkiss_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) { - unsigned char *ptr = d; - unsigned char c=0; - - *ptr++ = END; - while (len > 0) { - if (len > 2) - c = *s++; - else if (len > 1) - c = crc >> 8; - else if (len > 0) - c = crc & 0xff; + struct mkiss *ax = mkiss_get(tty); + struct net_device *dev = ax->dev; + unsigned int tmp, err; - len--; + /* First make sure we're connected. */ + if (ax == NULL) + return -ENXIO; - switch (c) { - case END: - *ptr++ = ESC; - *ptr++ = ESC_END; - break; - case ESC: - *ptr++ = ESC; - *ptr++ = ESC_ESC; - break; - default: - *ptr++ = c; - break; + switch (cmd) { + case SIOCGIFNAME: + err = copy_to_user((void __user *) arg, ax->dev->name, + strlen(ax->dev->name) + 1) ? -EFAULT : 0; + break; + + case SIOCGIFENCAP: + err = put_user(4, (int __user *) arg); + break; + + case SIOCSIFENCAP: + if (get_user(tmp, (int __user *) arg)) { + err = -EFAULT; + break; } - } - *ptr++ = END; - return ptr - d; -} -static void kiss_unesc(struct ax_disp *ax, unsigned char s) -{ - switch (s) { - case END: - /* drop keeptest bit = VSV */ - if (test_bit(AXF_KEEPTEST, &ax->flags)) - clear_bit(AXF_KEEPTEST, &ax->flags); + ax->mode = tmp; + dev->addr_len = AX25_ADDR_LEN; + dev->hard_header_len = AX25_KISS_HEADER_LEN + + AX25_MAX_HEADER_LEN + 3; + dev->type = ARPHRD_AX25; - if (!test_and_clear_bit(AXF_ERROR, &ax->flags) && (ax->rcount > 2)) - ax_bump(ax); + err = 0; + break; - clear_bit(AXF_ESCAPE, &ax->flags); - ax->rcount = 0; - return; + case SIOCSIFHWADDR: { + char addr[AX25_ADDR_LEN]; +printk(KERN_INFO "In SIOCSIFHWADDR"); - case ESC: - set_bit(AXF_ESCAPE, &ax->flags); - return; - case ESC_ESC: - if (test_and_clear_bit(AXF_ESCAPE, &ax->flags)) - s = ESC; + if (copy_from_user(&addr, + (void __user *) arg, AX25_ADDR_LEN)) { + err = -EFAULT; break; - case ESC_END: - if (test_and_clear_bit(AXF_ESCAPE, &ax->flags)) - s = END; - break; - } - - spin_lock_bh(&ax->buflock); - if (!test_bit(AXF_ERROR, &ax->flags)) { - if (ax->rcount < ax->buffsize) { - ax->rbuff[ax->rcount++] = s; - spin_unlock_bh(&ax->buflock); - return; } - ax->rx_over_errors++; - set_bit(AXF_ERROR, &ax->flags); + spin_lock_irq(&dev->xmit_lock); + memcpy(dev->dev_addr, addr, AX25_ADDR_LEN); + spin_unlock_irq(&dev->xmit_lock); + + err = 0; + break; + } + default: + err = -ENOIOCTLCMD; } - spin_unlock_bh(&ax->buflock); -} + mkiss_put(ax); -static int ax_set_mac_address(struct net_device *dev, void __user *addr) -{ - if (copy_from_user(dev->dev_addr, addr, AX25_ADDR_LEN)) - return -EFAULT; - return 0; + return err; } -static int ax_set_dev_mac_address(struct net_device *dev, void *addr) +/* + * Handle the 'receiver data ready' interrupt. + * This function is called by the 'tty_io' module in the kernel when + * a block of data has been received, which can now be decapsulated + * and sent on to the AX.25 layer for further processing. + */ +static void mkiss_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) { - struct sockaddr *sa = addr; - - memcpy(dev->dev_addr, sa->sa_data, AX25_ADDR_LEN); + struct mkiss *ax = mkiss_get(tty); - return 0; -} - - -/* Perform I/O control on an active ax25 channel. */ -static int ax25_disp_ioctl(struct tty_struct *tty, void *file, int cmd, void __user *arg) -{ - struct ax_disp *ax = (struct ax_disp *) tty->disc_data; - unsigned int tmp; + if (!ax) + return; - /* First make sure we're connected. */ - if (ax == NULL || ax->magic != AX25_MAGIC) - return -EINVAL; + /* + * Argh! mtu change time! - costs us the packet part received + * at the change + */ + if (ax->mtu != ax->dev->mtu + 73) + ax_changedmtu(ax); - switch (cmd) { - case SIOCGIFNAME: - if (copy_to_user(arg, ax->dev->name, strlen(ax->dev->name) + 1)) - return -EFAULT; - return 0; - - case SIOCGIFENCAP: - return put_user(4, (int __user *)arg); - - case SIOCSIFENCAP: - if (get_user(tmp, (int __user *)arg)) - return -EFAULT; - ax->mode = tmp; - ax->dev->addr_len = AX25_ADDR_LEN; /* sizeof an AX.25 addr */ - ax->dev->hard_header_len = AX25_KISS_HEADER_LEN + AX25_MAX_HEADER_LEN + 3; - ax->dev->type = ARPHRD_AX25; - return 0; - - case SIOCSIFHWADDR: - return ax_set_mac_address(ax->dev, arg); + /* Read the characters out of the buffer */ + while (count--) { + if (fp != NULL && *fp++) { + if (!test_and_set_bit(AXF_ERROR, &ax->flags)) + ax->stats.rx_errors++; + cp++; + continue; + } - default: - return -ENOIOCTLCMD; + kiss_unesc(ax, *cp++); } + + mkiss_put(ax); + if (test_and_clear_bit(TTY_THROTTLED, &tty->flags) + && tty->driver->unthrottle) + tty->driver->unthrottle(tty); } -static int ax_open_dev(struct net_device *dev) +static int mkiss_receive_room(struct tty_struct *tty) { - struct ax_disp *ax = netdev_priv(dev); - - if (ax->tty == NULL) - return -ENODEV; - - return 0; + return 65536; /* We can handle an infinite amount of data. :-) */ } - -/* Initialize the driver. Called by network startup. */ -static int ax25_init(struct net_device *dev) +/* + * Called by the driver when there's room for more data. If we have + * more packets to send, we send them here. + */ +static void mkiss_write_wakeup(struct tty_struct *tty) { - struct ax_disp *ax = netdev_priv(dev); - - static char ax25_bcast[AX25_ADDR_LEN] = - {'Q'<<1,'S'<<1,'T'<<1,' '<<1,' '<<1,' '<<1,'0'<<1}; - static char ax25_test[AX25_ADDR_LEN] = - {'L'<<1,'I'<<1,'N'<<1,'U'<<1,'X'<<1,' '<<1,'1'<<1}; - - if (ax == NULL) /* Allocation failed ?? */ - return -ENODEV; + struct mkiss *ax = mkiss_get(tty); + int actual; - /* Set up the "AX25 Control Block". (And clear statistics) */ - memset(ax, 0, sizeof (struct ax_disp)); - ax->magic = AX25_MAGIC; - ax->dev = dev; + if (!ax) + return; - /* Finish setting up the DEVICE info. */ - dev->mtu = AX_MTU; - dev->hard_start_xmit = ax_xmit; - dev->open = ax_open_dev; - dev->stop = ax_close; - dev->get_stats = ax_get_stats; - dev->set_mac_address = ax_set_dev_mac_address; - dev->hard_header_len = 0; - dev->addr_len = 0; - dev->type = ARPHRD_AX25; - dev->tx_queue_len = 10; - dev->hard_header = ax_header; - dev->rebuild_header = ax_rebuild_header; + if (ax->xleft <= 0) { + /* Now serial buffer is almost free & we can start + * transmission of another packet + */ + clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); - memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN); - memcpy(dev->dev_addr, ax25_test, AX25_ADDR_LEN); + netif_wake_queue(ax->dev); + goto out; + } - /* New-style flags. */ - dev->flags = IFF_BROADCAST | IFF_MULTICAST; + actual = tty->driver->write(tty, ax->xhead, ax->xleft); + ax->xleft -= actual; + ax->xhead += actual; - return 0; +out: + mkiss_put(ax); } +static struct tty_ldisc ax_ldisc = { + .magic = TTY_LDISC_MAGIC, + .name = "mkiss", + .open = mkiss_open, + .close = mkiss_close, + .ioctl = mkiss_ioctl, + .receive_buf = mkiss_receive_buf, + .receive_room = mkiss_receive_room, + .write_wakeup = mkiss_write_wakeup +}; -/* ******************************************************************** */ -/* * Init MKISS driver * */ -/* ******************************************************************** */ +static char banner[] __initdata = KERN_INFO \ + "mkiss: AX.25 Multikiss, Hans Albas PE1AYX\n"; +static char msg_regfail[] __initdata = KERN_ERR \ + "mkiss: can't register line discipline (err = %d)\n"; static int __init mkiss_init_driver(void) { @@ -887,64 +885,27 @@ static int __init mkiss_init_driver(void) printk(banner); - if (ax25_maxdev < 4) - ax25_maxdev = 4; /* Sanity */ + if ((status = tty_register_ldisc(N_AX25, &ax_ldisc)) != 0) + printk(msg_regfail); - if ((ax25_ctrls = kmalloc(sizeof(void *) * ax25_maxdev, GFP_KERNEL)) == NULL) { - printk(KERN_ERR "mkiss: Can't allocate ax25_ctrls[] array!\n"); - return -ENOMEM; - } - - /* Clear the pointer array, we allocate devices when we need them */ - memset(ax25_ctrls, 0, sizeof(void*) * ax25_maxdev); /* Pointers */ - - /* Fill in our line protocol discipline, and register it */ - ax_ldisc.magic = TTY_LDISC_MAGIC; - ax_ldisc.name = "mkiss"; - ax_ldisc.open = ax25_open; - ax_ldisc.close = ax25_close; - ax_ldisc.ioctl = (int (*)(struct tty_struct *, struct file *, - unsigned int, unsigned long))ax25_disp_ioctl; - ax_ldisc.receive_buf = ax25_receive_buf; - ax_ldisc.receive_room = ax25_receive_room; - ax_ldisc.write_wakeup = ax25_write_wakeup; - - if ((status = tty_register_ldisc(N_AX25, &ax_ldisc)) != 0) { - printk(KERN_ERR "mkiss: can't register line discipline (err = %d)\n", status); - kfree(ax25_ctrls); - } return status; } +static const char msg_unregfail[] __exitdata = KERN_ERR \ + "mkiss: can't unregister line discipline (err = %d)\n"; + static void __exit mkiss_exit_driver(void) { - int i; - - for (i = 0; i < ax25_maxdev; i++) { - if (ax25_ctrls[i]) { - /* - * VSV = if dev->start==0, then device - * unregistered while close proc. - */ - if (netif_running(&ax25_ctrls[i]->dev)) - unregister_netdev(&ax25_ctrls[i]->dev); - kfree(ax25_ctrls[i]); - } - } + int ret; - kfree(ax25_ctrls); - ax25_ctrls = NULL; - - if ((i = tty_unregister_ldisc(N_AX25))) - printk(KERN_ERR "mkiss: can't unregister line discipline (err = %d)\n", i); + if ((ret = tty_unregister_ldisc(N_AX25))) + printk(msg_unregfail, ret); } -MODULE_AUTHOR("Hans Albas PE1AYX "); +MODULE_AUTHOR("Ralf Baechle DL5RB "); MODULE_DESCRIPTION("KISS driver for AX.25 over TTYs"); -MODULE_PARM(ax25_maxdev, "i"); -MODULE_PARM_DESC(ax25_maxdev, "number of MKISS devices"); MODULE_LICENSE("GPL"); MODULE_ALIAS_LDISC(N_AX25); + module_init(mkiss_init_driver); module_exit(mkiss_exit_driver); - -- cgit v1.2.1 From 86f0cd505781e42000763821ec6f70127a6abaae Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Wed, 24 Aug 2005 01:14:23 +0200 Subject: [PATCH] r8169: avoid conflict between revisions 2 and 3 of the Linksys EG1032 Both revisions share the same PCI device ID and vendor ID but revision 2 of the device uses SysKonnect's chipset whereas revision 3 of the device uses Realtek's 8169 chipset. Credit goes to Christiaan Lutzer for reporting the issue and giving the actual value for the different revisions. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/r8169.c | 2 +- drivers/net/skge.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 2f9b3227243b..f0471d102e3c 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -186,8 +186,8 @@ const static struct { static struct pci_device_id rtl8169_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169), }, { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4300), }, - { PCI_DEVICE(PCI_VENDOR_ID_LINKSYS, 0x1032), }, { PCI_DEVICE(0x16ec, 0x0116), }, + { PCI_VENDOR_ID_LINKSYS, 0x1032, PCI_ANY_ID, 0x0024, }, {0,}, }; diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 48a43b84ea5f..d7c98515fdfd 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -79,8 +79,8 @@ static const struct pci_device_id skge_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */ { PCI_DEVICE(PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD) }, - { PCI_DEVICE(PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1032) }, { PCI_DEVICE(PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1064) }, + { PCI_VENDOR_ID_LINKSYS, 0x1032, PCI_ANY_ID, 0x0015, }, { 0 } }; MODULE_DEVICE_TABLE(pci, skge_id_table); -- cgit v1.2.1 From 8dbddf17824861f2298de093549e6493d9844835 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sat, 27 Aug 2005 00:56:18 -0600 Subject: [PATCH] acpi_shutdown: Only prepare for power off on power_off When acpi_sleep_prepare was moved into a shutdown method we started calling it for all shutdowns. It appears this triggers some systems to power off on reboot. Avoid this by only calling acpi_sleep_prepare if we are going to power off the system. Signed-off-by: Eric W. Biederman Signed-off-by: Linus Torvalds --- drivers/acpi/sleep/poweroff.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/sleep/poweroff.c b/drivers/acpi/sleep/poweroff.c index 186b182c5825..f93d2ee54800 100644 --- a/drivers/acpi/sleep/poweroff.c +++ b/drivers/acpi/sleep/poweroff.c @@ -55,7 +55,11 @@ void acpi_power_off(void) static int acpi_shutdown(struct sys_device *x) { - return acpi_sleep_prepare(ACPI_STATE_S5); + if (system_state == SYSTEM_POWER_OFF) { + /* Prepare if we are going to power off the system */ + return acpi_sleep_prepare(ACPI_STATE_S5); + } + return 0; } static struct sysdev_class acpi_sysclass = { -- cgit v1.2.1 From 820d220de400cfaaf846a2d8b5de93f9ea5a9b80 Mon Sep 17 00:00:00 2001 From: James Morris Date: Sat, 27 Aug 2005 13:47:06 +0200 Subject: [PATCH] Fix capifs bug in initialization error path. This fixes a bug in the capifs initialization code, where the filesystem is not unregistered if kern_mount() fails. Signed-off-by: James Morris Signed-off-by: Karsten Keil Signed-off-by: Linus Torvalds --- drivers/isdn/capi/capifs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/isdn/capi/capifs.c b/drivers/isdn/capi/capifs.c index f8570fd9d2ab..3abd7fc6e5ef 100644 --- a/drivers/isdn/capi/capifs.c +++ b/drivers/isdn/capi/capifs.c @@ -191,8 +191,10 @@ static int __init capifs_init(void) err = register_filesystem(&capifs_fs_type); if (!err) { capifs_mnt = kern_mount(&capifs_fs_type); - if (IS_ERR(capifs_mnt)) + if (IS_ERR(capifs_mnt)) { err = PTR_ERR(capifs_mnt); + unregister_filesystem(&capifs_fs_type); + } } if (!err) printk(KERN_NOTICE "capifs: Rev %s\n", rev); -- cgit v1.2.1 From 8126fdbc76351bdf99c6737ef4fecf88a22fa538 Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Sat, 27 Aug 2005 19:30:30 +0200 Subject: [PATCH] fix for race problem in DVB USB drivers (dibusb) Fixed race between submitting streaming URBs in the driver and starting the actual transfer in hardware (demodulator and USB controller) which sometimes lead to garbled data transfers. URBs are now submitted first, then the transfer is enabled. Dibusb devices and clones are now fully functional again. Signed-off-by: Patrick Boettcher Signed-off-by: Linus Torvalds --- drivers/media/dvb/dvb-usb/dibusb-common.c | 19 ++++++++++++++----- drivers/media/dvb/dvb-usb/dvb-usb-dvb.c | 5 +++-- 2 files changed, 17 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c index 63b626f70c81..9b9d6f8ee74e 100644 --- a/drivers/media/dvb/dvb-usb/dibusb-common.c +++ b/drivers/media/dvb/dvb-usb/dibusb-common.c @@ -70,13 +70,22 @@ EXPORT_SYMBOL(dibusb_power_ctrl); int dibusb2_0_streaming_ctrl(struct dvb_usb_device *d, int onoff) { - u8 b[2]; - b[0] = DIBUSB_REQ_SET_IOCTL; - b[1] = onoff ? DIBUSB_IOCTL_CMD_ENABLE_STREAM : DIBUSB_IOCTL_CMD_DISABLE_STREAM; + u8 b[3] = { 0 }; + int ret; + + if ((ret = dibusb_streaming_ctrl(d,onoff)) < 0) + return ret; - dvb_usb_generic_write(d,b,3); + if (onoff) { + b[0] = DIBUSB_REQ_SET_STREAMING_MODE; + b[1] = 0x00; + if ((ret = dvb_usb_generic_write(d,b,2)) < 0) + return ret; + } - return dibusb_streaming_ctrl(d,onoff); + b[0] = DIBUSB_REQ_SET_IOCTL; + b[1] = onoff ? DIBUSB_IOCTL_CMD_ENABLE_STREAM : DIBUSB_IOCTL_CMD_DISABLE_STREAM; + return dvb_usb_generic_write(d,b,3); } EXPORT_SYMBOL(dibusb2_0_streaming_ctrl); diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c index 3491ff40885c..6fa92100248b 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c @@ -23,12 +23,12 @@ static int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, int onoff) */ if (newfeedcount == 0) { deb_ts("stop feeding\n"); + dvb_usb_urb_kill(d); if (d->props.streaming_ctrl != NULL) if ((ret = d->props.streaming_ctrl(d,0))) err("error while stopping stream."); - dvb_usb_urb_kill(d); } d->feedcount = newfeedcount; @@ -44,6 +44,8 @@ static int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, int onoff) * for reception. */ if (d->feedcount == onoff && d->feedcount > 0) { + deb_ts("submitting all URBs\n"); + dvb_usb_urb_submit(d); deb_ts("controlling pid parser\n"); if (d->props.caps & DVB_USB_HAS_PID_FILTER && @@ -59,7 +61,6 @@ static int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, int onoff) return -ENODEV; } - dvb_usb_urb_submit(d); } return 0; } -- cgit v1.2.1 From 729d70f5dfd663b44bca68a4479c96bde7e535d6 Mon Sep 17 00:00:00 2001 From: Jan Blunck Date: Sat, 27 Aug 2005 11:07:52 -0700 Subject: [PATCH] sg.c: fix a memory leak in devices seq_file implementation I know that scsi procfs is legacy code but this is a fix for a memory leak. While reading through sg.c I realized that the implementation of /proc/scsi/sg/devices with seq_file is leaking memory due to freeing the pointer returned by the next() iterator method. Since next() might return NULL or an error this is wrong. This patch fixes it through using the seq_files private field for holding the reference to the iterator object. Here is a small bash script to trigger the leak. Use slabtop to watch the size-32 usage grow and grow. #!/bin/sh while true; do cat /proc/scsi/sg/devices > /dev/null done Signed-off-by: Jan Blunck Acked-by: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/scsi/sg.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 51292f269ce5..e822ca0e97cf 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -2971,23 +2971,22 @@ static void * dev_seq_start(struct seq_file *s, loff_t *pos) { struct sg_proc_deviter * it = kmalloc(sizeof(*it), GFP_KERNEL); + s->private = it; if (! it) return NULL; + if (NULL == sg_dev_arr) - goto err1; + return NULL; it->index = *pos; it->max = sg_last_dev(); if (it->index >= it->max) - goto err1; + return NULL; return it; -err1: - kfree(it); - return NULL; } static void * dev_seq_next(struct seq_file *s, void *v, loff_t *pos) { - struct sg_proc_deviter * it = (struct sg_proc_deviter *) v; + struct sg_proc_deviter * it = s->private; *pos = ++it->index; return (it->index < it->max) ? it : NULL; @@ -2995,7 +2994,7 @@ static void * dev_seq_next(struct seq_file *s, void *v, loff_t *pos) static void dev_seq_stop(struct seq_file *s, void *v) { - kfree (v); + kfree(s->private); } static int sg_proc_open_dev(struct inode *inode, struct file *file) -- cgit v1.2.1 From 3859f6a248cbdfbe7b41663f3a2b51f48e30b281 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Sat, 27 Aug 2005 11:07:54 -0700 Subject: [PATCH] zfcp: add rports to enable scsi_add_device to work again This patch fixes a severe problem with 2.6.13-rc7. Due to recent SCSI changes it is not possible to add any LUNs to the zfcp device driver anymore. With registration of remote ports this is fixed. Signed-off-by: Andreas Herrmann Acked-by: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/s390/scsi/zfcp_aux.c | 29 +++++++---------------------- drivers/s390/scsi/zfcp_ccw.c | 10 ++++++++++ drivers/s390/scsi/zfcp_def.h | 2 +- drivers/s390/scsi/zfcp_erp.c | 25 ++++++++++++++++++++++--- drivers/s390/scsi/zfcp_ext.h | 2 ++ drivers/s390/scsi/zfcp_fsf.c | 1 + drivers/s390/scsi/zfcp_scsi.c | 25 ++++++++++++++++++++----- 7 files changed, 63 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index e17b4d58a9f6..6fed4a532ca3 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -1299,13 +1299,10 @@ struct zfcp_port * zfcp_port_enqueue(struct zfcp_adapter *adapter, wwn_t wwpn, u32 status, u32 d_id) { - struct zfcp_port *port, *tmp_port; + struct zfcp_port *port; int check_wwpn; - scsi_id_t scsi_id; - int found; check_wwpn = !(status & ZFCP_STATUS_PORT_NO_WWPN); - /* * check that there is no port with this WWPN already in list */ @@ -1368,7 +1365,7 @@ zfcp_port_enqueue(struct zfcp_adapter *adapter, wwn_t wwpn, u32 status, } else { snprintf(port->sysfs_device.bus_id, BUS_ID_SIZE, "0x%016llx", wwpn); - port->sysfs_device.parent = &adapter->ccw_device->dev; + port->sysfs_device.parent = &adapter->ccw_device->dev; } port->sysfs_device.release = zfcp_sysfs_port_release; dev_set_drvdata(&port->sysfs_device, port); @@ -1388,24 +1385,8 @@ zfcp_port_enqueue(struct zfcp_adapter *adapter, wwn_t wwpn, u32 status, zfcp_port_get(port); - scsi_id = 1; - found = 0; write_lock_irq(&zfcp_data.config_lock); - list_for_each_entry(tmp_port, &adapter->port_list_head, list) { - if (atomic_test_mask(ZFCP_STATUS_PORT_NO_SCSI_ID, - &tmp_port->status)) - continue; - if (tmp_port->scsi_id != scsi_id) { - found = 1; - break; - } - scsi_id++; - } - port->scsi_id = scsi_id; - if (found) - list_add_tail(&port->list, &tmp_port->list); - else - list_add_tail(&port->list, &adapter->port_list_head); + list_add_tail(&port->list, &adapter->port_list_head); atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status); atomic_set_mask(ZFCP_STATUS_COMMON_RUNNING, &port->status); if (d_id == ZFCP_DID_DIRECTORY_SERVICE) @@ -1422,11 +1403,15 @@ zfcp_port_enqueue(struct zfcp_adapter *adapter, wwn_t wwpn, u32 status, void zfcp_port_dequeue(struct zfcp_port *port) { + struct fc_port *rport; + zfcp_port_wait(port); write_lock_irq(&zfcp_data.config_lock); list_del(&port->list); port->adapter->ports--; write_unlock_irq(&zfcp_data.config_lock); + if (port->rport) + fc_remote_port_delete(rport); zfcp_adapter_put(port->adapter); zfcp_sysfs_port_remove_files(&port->sysfs_device, atomic_read(&port->status)); diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index 0fc46381fc22..3c65aedaa97f 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -202,9 +202,19 @@ static int zfcp_ccw_set_offline(struct ccw_device *ccw_device) { struct zfcp_adapter *adapter; + struct zfcp_port *port; + struct fc_port *rport; down(&zfcp_data.config_sema); adapter = dev_get_drvdata(&ccw_device->dev); + /* might be racy, but we cannot take config_lock due to the fact that + fc_remote_port_delete might sleep */ + list_for_each_entry(port, &adapter->port_list_head, list) + if (port->rport) { + rport = port->rport; + port->rport = NULL; + fc_remote_port_delete(rport); + } zfcp_erp_adapter_shutdown(adapter, 0); zfcp_erp_wait(adapter); zfcp_adapter_scsi_unregister(adapter); diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 4103b5be7683..455e902533a9 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -906,6 +906,7 @@ struct zfcp_adapter { */ struct zfcp_port { struct device sysfs_device; /* sysfs device */ + struct fc_rport *rport; /* rport of fc transport class */ struct list_head list; /* list of remote ports */ atomic_t refcount; /* reference count */ wait_queue_head_t remove_wq; /* can be used to wait for @@ -916,7 +917,6 @@ struct zfcp_port { list */ u32 units; /* # of logical units in list */ atomic_t status; /* status of this remote port */ - scsi_id_t scsi_id; /* own SCSI ID */ wwn_t wwnn; /* WWNN if known */ wwn_t wwpn; /* WWPN */ fc_id_t d_id; /* D_ID */ diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 0cf31f7d1c0f..cb4f612550ba 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -3360,13 +3360,32 @@ zfcp_erp_action_cleanup(int action, struct zfcp_adapter *adapter, if ((result == ZFCP_ERP_SUCCEEDED) && (!atomic_test_mask(ZFCP_STATUS_UNIT_TEMPORARY, &unit->status)) - && (!unit->device)) - scsi_add_device(unit->port->adapter->scsi_host, 0, - unit->port->scsi_id, unit->scsi_lun); + && !unit->device + && port->rport) + scsi_add_device(port->adapter->scsi_host, 0, + port->rport->scsi_target_id, + unit->scsi_lun); zfcp_unit_put(unit); break; case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED: case ZFCP_ERP_ACTION_REOPEN_PORT: + if ((result == ZFCP_ERP_SUCCEEDED) + && !atomic_test_mask(ZFCP_STATUS_PORT_NO_WWPN, + &port->status) + && !port->rport) { + struct fc_rport_identifiers ids; + ids.node_name = port->wwnn; + ids.port_name = port->wwpn; + ids.port_id = port->d_id; + ids.roles = FC_RPORT_ROLE_FCP_TARGET; + port->rport = + fc_remote_port_add(adapter->scsi_host, 0, &ids); + if (!port->rport) + ZFCP_LOG_NORMAL("failed registration of rport" + "(adapter %s, wwpn=0x%016Lx)\n", + zfcp_get_busid_by_port(port), + port->wwpn); + } zfcp_port_put(port); break; case ZFCP_ERP_ACTION_REOPEN_ADAPTER: diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index 42df7e57eeae..cd98a2de9f8f 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -143,6 +143,8 @@ extern int zfcp_scsi_command_async(struct zfcp_adapter *,struct zfcp_unit *, struct scsi_cmnd *, struct timer_list *); extern int zfcp_scsi_command_sync(struct zfcp_unit *, struct scsi_cmnd *, struct timer_list *); +extern void zfcp_set_fc_host_attrs(struct zfcp_adapter *); +extern void zfcp_set_fc_rport_attrs(struct zfcp_port *); extern struct scsi_transport_template *zfcp_transport_template; extern struct fc_function_template zfcp_transport_functions; diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 0d9f20edc490..c007b6424e74 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -2062,6 +2062,7 @@ zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *fsf_req, int xchg_ok) zfcp_erp_adapter_shutdown(adapter, 0); return -EIO; } + zfcp_set_fc_host_attrs(adapter); return 0; } diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index b61d309352c3..31a76065cf28 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -389,7 +389,7 @@ zfcp_unit_lookup(struct zfcp_adapter *adapter, int channel, scsi_id_t id, struct zfcp_unit *unit, *retval = NULL; list_for_each_entry(port, &adapter->port_list_head, list) { - if (id != port->scsi_id) + if (!port->rport || (id != port->rport->scsi_target_id)) continue; list_for_each_entry(unit, &port->unit_list_head, list) { if (lun == unit->scsi_lun) { @@ -408,7 +408,7 @@ zfcp_port_lookup(struct zfcp_adapter *adapter, int channel, scsi_id_t id) struct zfcp_port *port; list_for_each_entry(port, &adapter->port_list_head, list) { - if (id == port->scsi_id) + if (port->rport && (id == port->rport->scsi_target_id)) return port; } return (struct zfcp_port *) NULL; @@ -634,7 +634,6 @@ zfcp_scsi_eh_device_reset_handler(struct scsi_cmnd *scpnt) { int retval; struct zfcp_unit *unit = (struct zfcp_unit *) scpnt->device->hostdata; - struct Scsi_Host *scsi_host = scpnt->device->host; if (!unit) { ZFCP_LOG_NORMAL("bug: Tried reset for nonexistent unit\n"); @@ -729,7 +728,6 @@ zfcp_scsi_eh_bus_reset_handler(struct scsi_cmnd *scpnt) { int retval = 0; struct zfcp_unit *unit; - struct Scsi_Host *scsi_host = scpnt->device->host; unit = (struct zfcp_unit *) scpnt->device->hostdata; ZFCP_LOG_NORMAL("bus reset because of problems with " @@ -753,7 +751,6 @@ zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt) { int retval = 0; struct zfcp_unit *unit; - struct Scsi_Host *scsi_host = scpnt->device->host; unit = (struct zfcp_unit *) scpnt->device->hostdata; ZFCP_LOG_NORMAL("host reset because of problems with " @@ -833,6 +830,7 @@ zfcp_adapter_scsi_unregister(struct zfcp_adapter *adapter) shost = adapter->scsi_host; if (!shost) return; + fc_remove_host(shost); scsi_remove_host(shost); scsi_host_put(shost); adapter->scsi_host = NULL; @@ -906,6 +904,18 @@ zfcp_get_node_name(struct scsi_target *starget) read_unlock_irqrestore(&zfcp_data.config_lock, flags); } +void +zfcp_set_fc_host_attrs(struct zfcp_adapter *adapter) +{ + struct Scsi_Host *shost = adapter->scsi_host; + + fc_host_node_name(shost) = adapter->wwnn; + fc_host_port_name(shost) = adapter->wwpn; + strncpy(fc_host_serial_number(shost), adapter->serial_number, + min(FC_SERIAL_NUMBER_SIZE, 32)); + fc_host_supported_classes(shost) = FC_COS_CLASS2 | FC_COS_CLASS3; +} + struct fc_function_template zfcp_transport_functions = { .get_starget_port_id = zfcp_get_port_id, .get_starget_port_name = zfcp_get_port_name, @@ -913,6 +923,11 @@ struct fc_function_template zfcp_transport_functions = { .show_starget_port_id = 1, .show_starget_port_name = 1, .show_starget_node_name = 1, + .show_rport_supported_classes = 1, + .show_host_node_name = 1, + .show_host_port_name = 1, + .show_host_supported_classes = 1, + .show_host_serial_number = 1, }; /** -- cgit v1.2.1 From f786648b89f00d4e66fe6b19beffd30e764651fc Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Sun, 28 Aug 2005 09:40:01 +1000 Subject: [PATCH] Remove race between con_open and con_close [ Same race and same patch also by Steven Rostedt ] I have a laptop (G3 powerbook) which will pretty reliably hit a race between con_open and con_close late in the boot process and oops in vt_ioctl due to tty->driver_data being NULL. What happens is this: process A opens /dev/tty6; it comes into con_open() (drivers/char/vt.c) and assign a non-NULL value to tty->driver_data. Then process A closes that and concurrently process B opens /dev/tty6. Process A gets through con_close() and clears tty->driver_data, since tty->count == 1. However, before process A can decrement tty->count, we switch to process B (e.g. at the down(&tty_sem) call at drivers/char/tty_io.c line 1626). So process B gets to run and comes into con_open with tty->count == 2, as tty->count is incremented (in init_dev) before con_open is called. Because tty->count != 1, we don't set tty->driver_data. Then when the process tries to do anything with that fd, it oopses. The simple and effective fix for this is to test tty->driver_data rather than tty->count in con_open. The testing and setting of tty->driver_data is serialized with respect to the clearing of tty->driver_data in con_close by the console_sem. We can't get a situation where con_open sees tty->driver_data != NULL and then con_close on a different fd clears tty->driver_data, because tty->count is incremented before con_open is called. Thus this patch eliminates the race, and in fact with this patch my laptop doesn't oops. Signed-off-by: Paul Mackerras [ Same patch Signed-off-by: Steven Rostedt in http://marc.theaimsgroup.com/?l=linux-kernel&m=112450820432121&w=2 ] Signed-off-by: Linus Torvalds --- drivers/char/vt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 30d96739fb23..665103ccaee8 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -2433,7 +2433,7 @@ static int con_open(struct tty_struct *tty, struct file *filp) int ret = 0; acquire_console_sem(); - if (tty->count == 1) { + if (tty->driver_data == NULL) { ret = vc_allocate(currcons); if (ret == 0) { struct vc_data *vc = vc_cons[currcons].d; -- cgit v1.2.1 From 7f84f226389fc5f47b3cb36818972e2e171607de Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sun, 28 Aug 2005 15:33:53 +0400 Subject: [PATCH] zfcp: fix compilation due to rports changes struct zfcp_port::scsi_id was removed by commit 3859f6a248cbdfbe7b41663f3a2b51f48e30b281 Signed-off-by: Alexey Dobriyan Signed-off-by: Linus Torvalds --- drivers/s390/scsi/zfcp_sysfs_port.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/scsi/zfcp_sysfs_port.c b/drivers/s390/scsi/zfcp_sysfs_port.c index 7a84c7d474d9..c55e82d91deb 100644 --- a/drivers/s390/scsi/zfcp_sysfs_port.c +++ b/drivers/s390/scsi/zfcp_sysfs_port.c @@ -67,7 +67,6 @@ static DEVICE_ATTR(_name, S_IRUGO, zfcp_sysfs_port_##_name##_show, NULL); ZFCP_DEFINE_PORT_ATTR(status, "0x%08x\n", atomic_read(&port->status)); ZFCP_DEFINE_PORT_ATTR(wwnn, "0x%016llx\n", port->wwnn); ZFCP_DEFINE_PORT_ATTR(d_id, "0x%06x\n", port->d_id); -ZFCP_DEFINE_PORT_ATTR(scsi_id, "0x%x\n", port->scsi_id); ZFCP_DEFINE_PORT_ATTR(in_recovery, "%d\n", atomic_test_mask (ZFCP_STATUS_COMMON_ERP_INUSE, &port->status)); ZFCP_DEFINE_PORT_ATTR(access_denied, "%d\n", atomic_test_mask @@ -263,7 +262,6 @@ static struct attribute_group zfcp_port_common_attr_group = { static struct attribute *zfcp_port_no_ns_attrs[] = { &dev_attr_unit_add.attr, &dev_attr_unit_remove.attr, - &dev_attr_scsi_id.attr, NULL }; -- cgit v1.2.1 From 20b1730af3ae05450b0e03f5aed40c4313f65db6 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sun, 28 Aug 2005 13:22:37 -0700 Subject: [PATCH] zfcp: bugfix and compile fixes Bugfix (usage of uninitialized pointer in zfcp_port_dequeue) and compile fixes for the zfcp device driver. Signed-off-by: Heiko Carstens Acked-by: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/s390/scsi/zfcp_aux.c | 5 ++--- drivers/s390/scsi/zfcp_ccw.c | 2 +- 2 files changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 6fed4a532ca3..bfe3ba73bc0f 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -1403,15 +1403,14 @@ zfcp_port_enqueue(struct zfcp_adapter *adapter, wwn_t wwpn, u32 status, void zfcp_port_dequeue(struct zfcp_port *port) { - struct fc_port *rport; - zfcp_port_wait(port); write_lock_irq(&zfcp_data.config_lock); list_del(&port->list); port->adapter->ports--; write_unlock_irq(&zfcp_data.config_lock); if (port->rport) - fc_remote_port_delete(rport); + fc_remote_port_delete(port->rport); + port->rport = NULL; zfcp_adapter_put(port->adapter); zfcp_sysfs_port_remove_files(&port->sysfs_device, atomic_read(&port->status)); diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index 3c65aedaa97f..b30abab77da3 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -203,7 +203,7 @@ zfcp_ccw_set_offline(struct ccw_device *ccw_device) { struct zfcp_adapter *adapter; struct zfcp_port *port; - struct fc_port *rport; + struct fc_rport *rport; down(&zfcp_data.config_sema); adapter = dev_get_drvdata(&ccw_device->dev); -- cgit v1.2.1 From e13934563db047043ccead26412f552375cea90c Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Wed, 24 Aug 2005 18:46:21 -0500 Subject: [PATCH] PHY Layer fixup This patch adds back the code that was taken out, thus re-enabling: * The PHY Layer to initialize without crashing * Drivers to actually connect to PHYs * The entire PHY Control Layer This patch is used by the gianfar driver, and other drivers which are in development. Signed-off-by: Andy Fleming Signed-off-by: Jeff Garzik --- drivers/net/phy/Kconfig | 8 ++ drivers/net/phy/Makefile | 11 +- drivers/net/phy/mdio_bus.c | 79 ++++++++++- drivers/net/phy/phy.c | 325 +++++++++++++++++++++++++++++++++---------- drivers/net/phy/phy_device.c | 172 +++++++++++++++++++---- 5 files changed, 493 insertions(+), 102 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 6450bd71deb4..6a2fe3583478 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -12,6 +12,14 @@ config PHYLIB devices. This option provides infrastructure for managing PHY devices. +config PHYCONTROL + bool " Support for automatically handling PHY state changes" + depends on PHYLIB + help + Adds code to perform all the work for keeping PHY link + state (speed/duplex/etc) up-to-date. Also handles + interrupts. + comment "MII PHY device drivers" depends on PHYLIB diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index fb7cb385a659..e4116a5fbb4c 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -2,8 +2,9 @@ libphy-objs := phy.o phy_device.o mdio_bus.o -obj-$(CONFIG_MARVELL_PHY) += libphy.o marvell.o -obj-$(CONFIG_DAVICOM_PHY) += libphy.o davicom.o -obj-$(CONFIG_CICADA_PHY) += libphy.o cicada.o -obj-$(CONFIG_LXT_PHY) += libphy.o lxt.o -obj-$(CONFIG_QSEMI_PHY) += libphy.o qsemi.o +obj-$(CONFIG_PHYLIB) += libphy.o +obj-$(CONFIG_MARVELL_PHY) += marvell.o +obj-$(CONFIG_DAVICOM_PHY) += davicom.o +obj-$(CONFIG_CICADA_PHY) += cicada.o +obj-$(CONFIG_LXT_PHY) += lxt.o +obj-$(CONFIG_QSEMI_PHY) += qsemi.o diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index d5a05be28818..41f62c0c5fcb 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -38,6 +38,80 @@ #include #include +/* mdiobus_register + * + * description: Called by a bus driver to bring up all the PHYs + * on a given bus, and attach them to the bus + */ +int mdiobus_register(struct mii_bus *bus) +{ + int i; + int err = 0; + + spin_lock_init(&bus->mdio_lock); + + if (NULL == bus || NULL == bus->name || + NULL == bus->read || + NULL == bus->write) + return -EINVAL; + + if (bus->reset) + bus->reset(bus); + + for (i = 0; i < PHY_MAX_ADDR; i++) { + struct phy_device *phydev; + + phydev = get_phy_device(bus, i); + + if (IS_ERR(phydev)) + return PTR_ERR(phydev); + + /* There's a PHY at this address + * We need to set: + * 1) IRQ + * 2) bus_id + * 3) parent + * 4) bus + * 5) mii_bus + * And, we need to register it */ + if (phydev) { + phydev->irq = bus->irq[i]; + + phydev->dev.parent = bus->dev; + phydev->dev.bus = &mdio_bus_type; + sprintf(phydev->dev.bus_id, "phy%d:%d", bus->id, i); + + phydev->bus = bus; + + err = device_register(&phydev->dev); + + if (err) + printk(KERN_ERR "phy %d failed to register\n", + i); + } + + bus->phy_map[i] = phydev; + } + + pr_info("%s: probed\n", bus->name); + + return err; +} +EXPORT_SYMBOL(mdiobus_register); + +void mdiobus_unregister(struct mii_bus *bus) +{ + int i; + + for (i = 0; i < PHY_MAX_ADDR; i++) { + if (bus->phy_map[i]) { + device_unregister(&bus->phy_map[i]->dev); + kfree(bus->phy_map[i]); + } + } +} +EXPORT_SYMBOL(mdiobus_unregister); + /* mdio_bus_match * * description: Given a PHY device, and a PHY driver, return 1 if @@ -96,4 +170,7 @@ int __init mdio_bus_init(void) return bus_register(&mdio_bus_type); } - +void __exit mdio_bus_exit(void) +{ + bus_unregister(&mdio_bus_type); +} diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index d3e43631b89b..d9e11f93bf3a 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -39,10 +39,20 @@ #include #include -static void phy_timer(unsigned long data); -static int phy_disable_interrupts(struct phy_device *phydev); -static void phy_sanitize_settings(struct phy_device *phydev); -static int phy_stop_interrupts(struct phy_device *phydev); +/* Convenience function to print out the current phy status + */ +void phy_print_status(struct phy_device *phydev) +{ + pr_info("%s: Link is %s", phydev->dev.bus_id, + phydev->link ? "Up" : "Down"); + if (phydev->link) + printk(" - %d/%s", phydev->speed, + DUPLEX_FULL == phydev->duplex ? + "Full" : "Half"); + + printk("\n"); +} +EXPORT_SYMBOL(phy_print_status); /* Convenience functions for reading/writing a given PHY @@ -114,42 +124,6 @@ static inline int phy_aneg_done(struct phy_device *phydev) return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE); } -/* phy_start_aneg - * - * description: Calls the PHY driver's config_aneg, and then - * sets the PHY state to PHY_AN if auto-negotiation is enabled, - * and to PHY_FORCING if auto-negotiation is disabled. Unless - * the PHY is currently HALTED. - */ -static int phy_start_aneg(struct phy_device *phydev) -{ - int err; - - spin_lock(&phydev->lock); - - if (AUTONEG_DISABLE == phydev->autoneg) - phy_sanitize_settings(phydev); - - err = phydev->drv->config_aneg(phydev); - - if (err < 0) - goto out_unlock; - - if (phydev->state != PHY_HALTED) { - if (AUTONEG_ENABLE == phydev->autoneg) { - phydev->state = PHY_AN; - phydev->link_timeout = PHY_AN_TIMEOUT; - } else { - phydev->state = PHY_FORCING; - phydev->link_timeout = PHY_FORCE_TIMEOUT; - } - } - -out_unlock: - spin_unlock(&phydev->lock); - return err; -} - /* A structure for mapping a particular speed and duplex * combination to a particular SUPPORTED and ADVERTISED value */ struct phy_setting { @@ -241,7 +215,7 @@ static inline int phy_find_valid(int idx, u32 features) * duplexes. Drop down by one in this order: 1000/FULL, * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF */ -static void phy_sanitize_settings(struct phy_device *phydev) +void phy_sanitize_settings(struct phy_device *phydev) { u32 features = phydev->supported; int idx; @@ -256,31 +230,7 @@ static void phy_sanitize_settings(struct phy_device *phydev) phydev->speed = settings[idx].speed; phydev->duplex = settings[idx].duplex; } - -/* phy_force_reduction - * - * description: Reduces the speed/duplex settings by - * one notch. The order is so: - * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF, - * 10/FULL, 10/HALF. The function bottoms out at 10/HALF. - */ -static void phy_force_reduction(struct phy_device *phydev) -{ - int idx; - - idx = phy_find_setting(phydev->speed, phydev->duplex); - - idx++; - - idx = phy_find_valid(idx, phydev->supported); - - phydev->speed = settings[idx].speed; - phydev->duplex = settings[idx].duplex; - - pr_info("Trying %d/%s\n", phydev->speed, - DUPLEX_FULL == phydev->duplex ? - "FULL" : "HALF"); -} +EXPORT_SYMBOL(phy_sanitize_settings); /* phy_ethtool_sset: * A generic ethtool sset function. Handles all the details @@ -291,6 +241,11 @@ static void phy_force_reduction(struct phy_device *phydev) * - phy_start_aneg() will make sure forced settings are sane, and * choose the next best ones from the ones selected, so we don't * care if ethtool tries to give us bad values + * + * A note about the PHYCONTROL Layer. If you turn off + * CONFIG_PHYCONTROL, you will need to read the PHY status + * registers after this function completes, and update your + * controller manually. */ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd) { @@ -406,6 +361,51 @@ int phy_mii_ioctl(struct phy_device *phydev, return 0; } +/* phy_start_aneg + * + * description: Sanitizes the settings (if we're not + * autonegotiating them), and then calls the driver's + * config_aneg function. If the PHYCONTROL Layer is operating, + * we change the state to reflect the beginning of + * Auto-negotiation or forcing. + */ +int phy_start_aneg(struct phy_device *phydev) +{ + int err; + + spin_lock(&phydev->lock); + + if (AUTONEG_DISABLE == phydev->autoneg) + phy_sanitize_settings(phydev); + + err = phydev->drv->config_aneg(phydev); + +#ifdef CONFIG_PHYCONTROL + if (err < 0) + goto out_unlock; + + if (phydev->state != PHY_HALTED) { + if (AUTONEG_ENABLE == phydev->autoneg) { + phydev->state = PHY_AN; + phydev->link_timeout = PHY_AN_TIMEOUT; + } else { + phydev->state = PHY_FORCING; + phydev->link_timeout = PHY_FORCE_TIMEOUT; + } + } + +out_unlock: +#endif + spin_unlock(&phydev->lock); + return err; +} +EXPORT_SYMBOL(phy_start_aneg); + + +#ifdef CONFIG_PHYCONTROL +static void phy_change(void *data); +static void phy_timer(unsigned long data); + /* phy_start_machine: * * description: The PHY infrastructure can run a state machine @@ -448,6 +448,32 @@ void phy_stop_machine(struct phy_device *phydev) phydev->adjust_state = NULL; } +/* phy_force_reduction + * + * description: Reduces the speed/duplex settings by + * one notch. The order is so: + * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF, + * 10/FULL, 10/HALF. The function bottoms out at 10/HALF. + */ +static void phy_force_reduction(struct phy_device *phydev) +{ + int idx; + + idx = phy_find_setting(phydev->speed, phydev->duplex); + + idx++; + + idx = phy_find_valid(idx, phydev->supported); + + phydev->speed = settings[idx].speed; + phydev->duplex = settings[idx].duplex; + + pr_info("Trying %d/%s\n", phydev->speed, + DUPLEX_FULL == phydev->duplex ? + "FULL" : "HALF"); +} + + /* phy_error: * * Moves the PHY to the HALTED state in response to a read @@ -462,22 +488,44 @@ void phy_error(struct phy_device *phydev) spin_unlock(&phydev->lock); } -static int phy_stop_interrupts(struct phy_device *phydev) +/* phy_interrupt + * + * description: When a PHY interrupt occurs, the handler disables + * interrupts, and schedules a work task to clear the interrupt. + */ +static irqreturn_t phy_interrupt(int irq, void *phy_dat, struct pt_regs *regs) +{ + struct phy_device *phydev = phy_dat; + + /* The MDIO bus is not allowed to be written in interrupt + * context, so we need to disable the irq here. A work + * queue will write the PHY to disable and clear the + * interrupt, and then reenable the irq line. */ + disable_irq_nosync(irq); + + schedule_work(&phydev->phy_queue); + + return IRQ_HANDLED; +} + +/* Enable the interrupts from the PHY side */ +int phy_enable_interrupts(struct phy_device *phydev) { int err; - err = phy_disable_interrupts(phydev); + err = phy_clear_interrupt(phydev); - if (err) - phy_error(phydev); + if (err < 0) + return err; - free_irq(phydev->irq, phydev); + err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); return err; } +EXPORT_SYMBOL(phy_enable_interrupts); /* Disable the PHY interrupts from the PHY side */ -static int phy_disable_interrupts(struct phy_device *phydev) +int phy_disable_interrupts(struct phy_device *phydev) { int err; @@ -500,6 +548,138 @@ phy_err: return err; } +EXPORT_SYMBOL(phy_disable_interrupts); + +/* phy_start_interrupts + * + * description: Request the interrupt for the given PHY. If + * this fails, then we set irq to PHY_POLL. + * Otherwise, we enable the interrupts in the PHY. + * Returns 0 on success. + * This should only be called with a valid IRQ number. + */ +int phy_start_interrupts(struct phy_device *phydev) +{ + int err = 0; + + INIT_WORK(&phydev->phy_queue, phy_change, phydev); + + if (request_irq(phydev->irq, phy_interrupt, + SA_SHIRQ, + "phy_interrupt", + phydev) < 0) { + printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n", + phydev->bus->name, + phydev->irq); + phydev->irq = PHY_POLL; + return 0; + } + + err = phy_enable_interrupts(phydev); + + return err; +} +EXPORT_SYMBOL(phy_start_interrupts); + +int phy_stop_interrupts(struct phy_device *phydev) +{ + int err; + + err = phy_disable_interrupts(phydev); + + if (err) + phy_error(phydev); + + free_irq(phydev->irq, phydev); + + return err; +} +EXPORT_SYMBOL(phy_stop_interrupts); + + +/* Scheduled by the phy_interrupt/timer to handle PHY changes */ +static void phy_change(void *data) +{ + int err; + struct phy_device *phydev = data; + + err = phy_disable_interrupts(phydev); + + if (err) + goto phy_err; + + spin_lock(&phydev->lock); + if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state)) + phydev->state = PHY_CHANGELINK; + spin_unlock(&phydev->lock); + + enable_irq(phydev->irq); + + /* Reenable interrupts */ + err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); + + if (err) + goto irq_enable_err; + + return; + +irq_enable_err: + disable_irq(phydev->irq); +phy_err: + phy_error(phydev); +} + +/* Bring down the PHY link, and stop checking the status. */ +void phy_stop(struct phy_device *phydev) +{ + spin_lock(&phydev->lock); + + if (PHY_HALTED == phydev->state) + goto out_unlock; + + if (phydev->irq != PHY_POLL) { + /* Clear any pending interrupts */ + phy_clear_interrupt(phydev); + + /* Disable PHY Interrupts */ + phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); + } + + phydev->state = PHY_HALTED; + +out_unlock: + spin_unlock(&phydev->lock); +} + + +/* phy_start + * + * description: Indicates the attached device's readiness to + * handle PHY-related work. Used during startup to start the + * PHY, and after a call to phy_stop() to resume operation. + * Also used to indicate the MDIO bus has cleared an error + * condition. + */ +void phy_start(struct phy_device *phydev) +{ + spin_lock(&phydev->lock); + + switch (phydev->state) { + case PHY_STARTING: + phydev->state = PHY_PENDING; + break; + case PHY_READY: + phydev->state = PHY_UP; + break; + case PHY_HALTED: + phydev->state = PHY_RESUMING; + default: + break; + } + spin_unlock(&phydev->lock); +} +EXPORT_SYMBOL(phy_stop); +EXPORT_SYMBOL(phy_start); /* PHY timer which handles the state machine */ static void phy_timer(unsigned long data) @@ -688,3 +868,4 @@ static void phy_timer(unsigned long data) mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ); } +#endif /* CONFIG_PHYCONTROL */ diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index c44d54f6310a..33f7bdb5857c 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -39,18 +39,9 @@ #include #include -static int genphy_config_init(struct phy_device *phydev); - -static struct phy_driver genphy_driver = { - .phy_id = 0xffffffff, - .phy_id_mask = 0xffffffff, - .name = "Generic PHY", - .config_init = genphy_config_init, - .features = 0, - .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, - .driver = {.owner = THIS_MODULE, }, -}; +static struct phy_driver genphy_driver; +extern int mdio_bus_init(void); +extern void mdio_bus_exit(void); /* get_phy_device * @@ -110,6 +101,7 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) return dev; } +#ifdef CONFIG_PHYCONTROL /* phy_prepare_link: * * description: Tells the PHY infrastructure to handle the @@ -124,6 +116,132 @@ void phy_prepare_link(struct phy_device *phydev, phydev->adjust_link = handler; } +/* phy_connect: + * + * description: Convenience function for connecting ethernet + * devices to PHY devices. The default behavior is for + * the PHY infrastructure to handle everything, and only notify + * the connected driver when the link status changes. If you + * don't want, or can't use the provided functionality, you may + * choose to call only the subset of functions which provide + * the desired functionality. + */ +struct phy_device * phy_connect(struct net_device *dev, const char *phy_id, + void (*handler)(struct net_device *), u32 flags) +{ + struct phy_device *phydev; + + phydev = phy_attach(dev, phy_id, flags); + + if (IS_ERR(phydev)) + return phydev; + + phy_prepare_link(phydev, handler); + + phy_start_machine(phydev, NULL); + + if (phydev->irq > 0) + phy_start_interrupts(phydev); + + return phydev; +} +EXPORT_SYMBOL(phy_connect); + +void phy_disconnect(struct phy_device *phydev) +{ + if (phydev->irq > 0) + phy_stop_interrupts(phydev); + + phy_stop_machine(phydev); + + phydev->adjust_link = NULL; + + phy_detach(phydev); +} +EXPORT_SYMBOL(phy_disconnect); + +#endif /* CONFIG_PHYCONTROL */ + +/* phy_attach: + * + * description: Called by drivers to attach to a particular PHY + * device. The phy_device is found, and properly hooked up + * to the phy_driver. If no driver is attached, then the + * genphy_driver is used. The phy_device is given a ptr to + * the attaching device, and given a callback for link status + * change. The phy_device is returned to the attaching + * driver. + */ +static int phy_compare_id(struct device *dev, void *data) +{ + return strcmp((char *)data, dev->bus_id) ? 0 : 1; +} + +struct phy_device *phy_attach(struct net_device *dev, + const char *phy_id, u32 flags) +{ + struct bus_type *bus = &mdio_bus_type; + struct phy_device *phydev; + struct device *d; + + /* Search the list of PHY devices on the mdio bus for the + * PHY with the requested name */ + d = bus_find_device(bus, NULL, (void *)phy_id, phy_compare_id); + + if (d) { + phydev = to_phy_device(d); + } else { + printk(KERN_ERR "%s not found\n", phy_id); + return ERR_PTR(-ENODEV); + } + + /* Assume that if there is no driver, that it doesn't + * exist, and we should use the genphy driver. */ + if (NULL == d->driver) { + int err; + down_write(&d->bus->subsys.rwsem); + d->driver = &genphy_driver.driver; + + err = d->driver->probe(d); + + if (err < 0) + return ERR_PTR(err); + + device_bind_driver(d); + up_write(&d->bus->subsys.rwsem); + } + + if (phydev->attached_dev) { + printk(KERN_ERR "%s: %s already attached\n", + dev->name, phy_id); + return ERR_PTR(-EBUSY); + } + + phydev->attached_dev = dev; + + phydev->dev_flags = flags; + + return phydev; +} +EXPORT_SYMBOL(phy_attach); + +void phy_detach(struct phy_device *phydev) +{ + phydev->attached_dev = NULL; + + /* If the device had no specific driver before (i.e. - it + * was using the generic driver), we unbind the device + * from the generic driver so that there's a chance a + * real driver could be loaded */ + if (phydev->dev.driver == &genphy_driver.driver) { + down_write(&phydev->dev.bus->subsys.rwsem); + device_release_driver(&phydev->dev); + up_write(&phydev->dev.bus->subsys.rwsem); + } +} +EXPORT_SYMBOL(phy_detach); + + /* Generic PHY support and helper functions */ /* genphy_config_advert @@ -132,7 +250,7 @@ void phy_prepare_link(struct phy_device *phydev, * after sanitizing the values to make sure we only advertise * what is supported */ -static int genphy_config_advert(struct phy_device *phydev) +int genphy_config_advert(struct phy_device *phydev) { u32 advertise; int adv; @@ -190,6 +308,7 @@ static int genphy_config_advert(struct phy_device *phydev) return adv; } +EXPORT_SYMBOL(genphy_config_advert); /* genphy_setup_forced * @@ -541,32 +660,37 @@ void phy_driver_unregister(struct phy_driver *drv) } EXPORT_SYMBOL(phy_driver_unregister); +static struct phy_driver genphy_driver = { + .phy_id = 0xffffffff, + .phy_id_mask = 0xffffffff, + .name = "Generic PHY", + .config_init = genphy_config_init, + .features = 0, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .driver = {.owner= THIS_MODULE, }, +}; static int __init phy_init(void) { int rc; - extern int mdio_bus_init(void); - - rc = phy_driver_register(&genphy_driver); - if (rc) - goto out; rc = mdio_bus_init(); if (rc) - goto out_unreg; + return rc; - return 0; + rc = phy_driver_register(&genphy_driver); + if (rc) + mdio_bus_exit(); -out_unreg: - phy_driver_unregister(&genphy_driver); -out: return rc; } static void __exit phy_exit(void) { phy_driver_unregister(&genphy_driver); + mdio_bus_exit(); } -module_init(phy_init); +subsys_initcall(phy_init); module_exit(phy_exit); -- cgit v1.2.1 From 03ecc6749ab2bfe7baf84b3e0e35018884758fa3 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 28 Aug 2005 03:47:50 +0100 Subject: [PATCH] missing include in tda80xx Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/media/dvb/frontends/tda80xx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/dvb/frontends/tda80xx.c b/drivers/media/dvb/frontends/tda80xx.c index 88e125079ca1..d1cabb6a0a13 100644 --- a/drivers/media/dvb/frontends/tda80xx.c +++ b/drivers/media/dvb/frontends/tda80xx.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include "dvb_frontend.h" -- cgit v1.2.1 From bf4e70e54cf31dcca48d279c7f7e71328eebe749 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 28 Aug 2005 03:52:22 +0100 Subject: [PATCH] missing include in smc-ultra Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/net/smc-ultra.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/smc-ultra.c b/drivers/net/smc-ultra.c index 6d9dae60a697..ba8593ac3f8a 100644 --- a/drivers/net/smc-ultra.c +++ b/drivers/net/smc-ultra.c @@ -68,6 +68,7 @@ static const char version[] = #include #include +#include #include #include "8390.h" -- cgit v1.2.1